Key Features

• Five Pin Sizes — The set includes five pins for pulling pinion gears of different sizes.
• Bearing Removal Use — It is designed for removing bearings, inner rings and other dense components on a car.
• Gear Size Capacity — It extracts gears with a maximum outer diameter of 11 mm and a tooth height of 12 mm.

Product Specifications

• Material: Metal
• Piece Count: 1pc
• Maximum Outer Diameter: 11 mm
• Maximum Tooth Height: 12 mm

What It Is / How It Works

This pinion gear puller is a metal tool for removing a pinion gear from a small motor shaft. It is supplied as one piece and is designed for removing bearings, inner rings and other dense components on a car.

Who It's For / Use Cases

Pinion gear pullers suit hobbyists and repair workers who service remote control models and small motors. They are used when a gear is pressed tightly onto a shaft and cannot be removed by hand, so a puller with several pin sizes helps match different motor shafts.

How to Use / Care

1. Heat a glued gear first to melt the glue before pulling it.
2. Choose the pin that matches the motor shaft diameter. A pin that is too small for the shaft can break the ejector pin.
3. Select the thimble you need, install the rotating rod, and tighten the screw. For a table thimble, do not overtighten the screw.
4. Clip the motor into the traveling plate and move it until the motor shaft aligns with the ejector pin. Rotate the lever uniformly in a clockwise direction to pull out the gear.

How to Choose

Measure the motor shaft diameter first and pick the pin size that matches it from the five sizes listed in the specifications.

Frequently Asked Questions

What gear sizes can it pull?
It can extract gears with a maximum outer diameter of 11 mm and a tooth height of 12 mm.

How many pins are included?
The set includes five pins for pulling pinion gears of different sizes: 0.8mm, 1.5mm and 1.6mm cylindrical pins, and 1.3mm and 2.2mm semicircular pins.

What is the body made of?
It is made of metal.

Can it be used on remote control models?
It is suitable for remote control models and for car inner rings and other dense components.

What happens if the pin is too small?
A pin that is too small for the motor shaft diameter can break the ejector pin, so select the pin to match the shaft.

Key Features

• Five Pin Set — It includes five pins for pulling pinion gears of different sizes.
• Metal Build — It is made of metal and is wear resistant.
• Bearing Removal — It is designed for removing bearings, inner rings and other dense components on a car.
• Gear Size Limit — Gears with a maximum outer diameter of 11 mm and a tooth height of 12 mm can be extracted.

Product Specifications

• Material: Metal
• Piece Count: 1pc
• Extractable Gear Limits: Maximum outer diameter 11 mm; tooth height 12 mm
• Packaging: Without retail package

What It Is / How It Works

This pinion gear puller is a metal tool sold as one piece for pulling pinion gears off motor shafts.

Gear pullers are mechanical tools that draw a gear off a shaft by applying steady pulling force through a bracket and threaded rod.

Who It's For / Use Cases

Gear pullers suit hobbyists and repair workers who service remote control models and small motors. They fit jobs where a gear is pressed tightly onto a shaft and needs to come off without being forced by hand.

How to Use / Care

1. Select a pin that suits the motor shaft diameter. Do not use a motor with too small a needle and too large a shaft diameter for tooth extraction, or the ejector pin will break. Heat a glued gear to melt the glue before extraction.
2. Select the tooth puller thimble you need, install the tooth puller rotating rod, and tighten the screw. For a table thimble, do not overtighten the screw.
3. Install the gear puller rotating rod into the gear puller bracket.
4. Install the gear puller traveling plate.

How to Choose

When choosing a gear puller, match the pin to the shaft diameter of the motor.

Frequently Asked Questions

What gears can it pull?
It can extract gears with a maximum outer diameter of 11 mm and a tooth height of 12 mm.

How many pins are in the set?
The set has five pins: 0.8mm cylindrical, 1.3mm semicircular, 1.5mm cylindrical, 1.6mm cylindrical and 2.2mm semicircular.

What is it made of?
It is made of metal, and the metal is wear resistant.

Does the pack contain more than one piece?
No. The pack contains one pinion gear puller.

What is it designed to remove?
It is designed for removing bearings, inner rings and other dense components on a car.

Key Features

• Pinion Gear Removal — Turning the active lever clockwise pulls the motor gear out of the motor.
• Remote Car Use — It is specially designed for remote control cars.
• Mini Motor Use — It is suited to pinion gears on mini motors in RC helicopters, planes and servos.
• Smooth Finish — The surface is bright and free of burrs, and the puller is compact.

Product Specifications

• Material: Metal
• Piece Count: 1 pcs
• Package Including: 1 pc RC pinion puller
• Intended Use: Mini motors of RC helicopters, planes and servos

What It Is / How It Works

Pinion gear pullers are tools for removing the pinion gear from a radio-control motor shaft when the gear must be replaced or serviced. This RC motor pinion gear puller is a tool of this type, sized for working on small RC motors.

Who It's For / Use Cases

Pinion gear pullers suit RC hobbyists who service, repair or upgrade radio-control motors and need to remove a worn or damaged pinion gear. They are used by people working on RC cars, helicopters and planes.

How to Use / Care

1. Install the gear lever into the rotation bracket.

How to Choose

Match the puller to the motor and gear you are working on. Compare the motor size and the pinion you need to remove with the puller's stated use before ordering. Pick the type of remote control vehicle that matches your motor, since the puller is designed for remote control cars and mini motors.

Frequently Asked Questions

What is the puller made of?
It is made of metal.

Does it need a battery?
No. The puller has no battery and works by turning its active lever.

What is included?
The package includes 1 RC pinion puller.

Which RC models is it for?
It is designed for remote control cars, such as HSP, HPI, Traxxas, RC4WD, AXIAL and SCX10 models.

Can it be used on helicopter motors?
It is suited to pinion gears on mini motors of RC helicopters, planes and servos.

Key Features

• Drift Driving — It drifts and also drives forward, backward, and turns left or right.
• Self-Balancing Motion — It self-balances while standing still or while driving in any direction.
• Detachable Rider — The rider can be removed from the bike.
• Outdoor Range — It has a range of 250 feet with 2.4GHz frequency control for use in an open outdoor area.

Product Specifications

• Scale: 1:10
• Small Scale size: 22.5 × 8.5 × 17 cm (8.9 × 3.35 × 6.7 in)
• Age Range: 6-12Y
• Control Channels: 4 channels
• Remote Distance: About 35 meters
• Max Speed: 15 KM/H
• Motor: Brush Motor
• Material: Plastic, rubber
• Body Battery: 7.4v 1200mAh Battery (built in)
• Controller Battery: 2 AA batteries (not included)

What It Is / How It Works

This RC motorcycle is a remote-controlled model motorcycle with a 4-channel controller. It runs on a built-in rechargeable battery and is driven with the handheld remote.

Who It's For / Use Cases

RC motorcycle models suit kids and hobbyists who enjoy driving miniature motorcycles outdoors. They are also a common choice as festival or holiday gifts for young riders who like motorbikes, racing, and remote-controlled toys.

How to Use / Care

1. Use the model outdoors in an open area.
2. Keep the controller within 250 feet of the model while driving.

How to Choose

Choose the scale first, since the 1:10 and 1:6 sizes differ in length and width. Look at the function list to pick the driving style you want, such as drift or turning, and check the age range against the child who will use it.

Frequently Asked Questions

How far does the controller reach?
It has a range of 250 feet with 2.4GHz frequency control, for use outdoors in an open area.

What batteries does it need?
The model has a built-in 7.4v 1200mAh battery. The controller takes 2 AA batteries, which are not included.

Which functions does it have?
It drives forward and backward, turns left and right, and drifts. The rider can be detached from the bike.

How fast does it go?
Its max speed is 15 KM/H.

What age is it for?
The age range is 6-12Y.

Key Features

• Sturdy Pieces — The pieces stay joined even when they are hit during play, and the model can be built again and again.
• Opening Doors — The doors on the model can be opened, which adds realistic detail.
• ABS Plastic Build — The model is made of plastic, specifically ABS.
• Display Ready — The finished model can stand on a desk, in an office or in a room as a display.
• Stickers and Instructions — It comes with stickers and an instruction book for assembly.

Product Specifications

• Material: Plastic
• Plastic Type: ABS
• Pattern: Self-Locking Bricks
• Size: Small building block (compatible with Lego)
• Age Range: 14+y
• Designed For: Unisex
• Accessories: Instruction book

What It Is / How It Works

This model car building block set is a plastic build kit for assembling a miniature car with opening doors.

Model car building block kits appeal to people who enjoy a step-by-step project that ends with a finished model to display.

Who It's For / Use Cases

This set is for children aged 14 and up, as well as adults who enjoy building and collecting miniatures.

Model car kits also suit gift buyers looking for a hands-on project for a builder who likes vehicles.

How to Use / Care

1. Follow the instruction book to build the model step by step.
2. Place the finished model on a desk, in an office or in a room to display it.
3. Keep the small parts out of the mouth, as they should not be swallowed.

How to Choose

Choose this set if you want a model car build with a finished piece for a desk, shelf or room. The recommended age is 14 and up, so match the set to the builder's age.

Builders who prefer a longer project with many small pieces will likely enjoy a block kit of this type more than a simple snap-together toy.

Frequently Asked Questions

What material is the set made of?
It is made of plastic, specifically ABS.

Who is the set for?
It is for children aged 14 and up, as well as adults who enjoy building and collecting miniatures.

Does it include instructions?
It includes an instruction book and stickers for assembly.

Does it need a battery?
It has no battery, so it is not an electric build kit.

Is it safe for young children?
It contains small parts that should not be swallowed. The recommended age is 14 and up.

Key Features

• ABS Plastic Build — The pieces are made of ABS plastic, which is durable and eco-friendly.
• Realistic Car Details — The model has realistic details, and its doors can be opened.
• Instruction Book and Stickers — It comes with stickers and a detailed color instruction book.

Product Specifications

• Material: Plastic
• Plastic Type: ABS
• Age Range: 14+y
• Designed For: Unisex
• Pattern: Self-Locking Bricks
• Size: Small building block (Compatible with Lego)

What It Is / How It Works

This car building block set is a model-car kit built from small plastic bricks. The set is made of ABS plastic, and its realistic details follow classic car design.

Model-car building block kits are typically assembled piece by piece and then displayed on a desk, shelf or in a room, so the finished model becomes a display piece.

Who It's For / Use Cases

It suits people who enjoy hands-on building projects, including older children and adults who collect miniatures. The age range is 14+y, and the set is designed for unisex use.

Model-car building kits are also a common choice for people who want a shared project with friends or family.

How to Use / Care

1. Place the finished model on a desk, office shelf or room display area.
2. Follow the color instruction book when you assemble the pieces.
3. Keep the small parts away from the mouth, since the set contains small parts.
4. If a part is missing, contact online customer service.

How to Choose

Choose this set if you want a car building project for the 14+y age range, or a model-car display piece for an adult collector. Check the Product Specifications for the age range, material and Size row before buying, so the set matches the builder you have in mind.

Frequently Asked Questions

What age range is the set for?
It suits children aged 14 and up, as well as adults who enjoy building and collecting miniatures. The age range is 14+y.

What is the set made of?
It is made of ABS plastic, which is durable and eco-friendly.

Can the model be assembled more than once?
The pieces can be assembled repeatedly. They do not come apart when they get hit during play.

Does the set need a battery?
No battery is needed, because the set has no power source.

Is it suitable as a gift?
It is suitable as a Christmas, Halloween or birthday gift for building fans.

Key Features

• Remote Control — It has a remote control that works up to 50 m (164 ft).
• Lithium Battery Power — It is electric and runs on a lithium battery.
• Ready-to-Go Setup — It is sold in a ready-to-go state.

Product Specifications

• Age Range: 14+y
• Remote Distance: 50 m (164 ft)
• Power: Lithium battery
• State of Assembly: Ready-to-Go
• Theme: Sports,Animals & Nature

What It Is / How It Works

This RC robot dog toy is a remote-controlled figure built to look and move like a pet dog. Robot dog toys in this category are typically used for play and display, and they pair a remote control with a battery-powered body. The brand is ANTSIR, and the theme is sports, animals and nature.

Who It's For / Use Cases

Remote-controlled robot dog toys suit people in the listed age range of 14 and up who enjoy electronic toys. Robot dog toys of this kind appeal to fans of animal-themed toys and remote-control play, and they suit buyers who want a toy they can operate from a distance rather than a static figure.

How to Use / Care

1. Use the remote control to operate the robot dog from up to 50 m (164 ft) away.
2. Keep the remote within that range while the robot dog is in use.

How to Choose

Next, look at the remote distance if you plan to operate the robot dog from across a room or yard. Decide whether you want a remote-controlled toy or a simpler figure, based on how you plan to play. Battery type is a selection point too, and this one runs on a lithium battery.

Frequently Asked Questions

What age range is this robot dog for?
The listed age range is 14+ years, so it is labelled for teens and older.

How far does the remote control reach?
The remote control works up to 50 m (164 ft). Keep the remote within that distance while the robot dog is running.

Are batteries included?
Batteries are included with the set, and the robot dog runs on a lithium battery.

Does it come assembled?
It is sold in a ready-to-go state, so it arrives ready to use rather than as a kit to build.

Who makes this robot dog?
The brand is ANTSIR. It is a remote-controlled robot dog toy with a theme of sports, animals and nature.

Key Features

• Waterproof Fabric — The umbrella cloth fabric is waterproof.
• Splash-Proof Design — It is splash-proof and very light, and it hardly affects the center of gravity.
• Decorative Roof Accent — It adds a decorative effect to the RC car and helps the model stand out among similar builds.
• Multiple Color Choices — It comes in several colors, so you can match your taste or the scene you build.

Product Specifications

• Material: Oxford cloth
• Scale: 1/8 and 1/10
• Quantity: 1 piece per pack
• Inner Structure: None; the bag cannot be opened
• Compatible models: 1/8 1/10 RC Crawler TRX4 SCX10 FCX10 MN

What It Is / How It Works

This simulated roof luggage tent bag is a decorative roof accessory for radio-controlled crawler models. Roof luggage bags are a common accessory on scale off-road builds, where they add visual detail to the body and roof area of the model.

Who It's For / Use Cases

Roof luggage bags suit crawler owners who want to personalize a scale off-road build. They also suit hobbyists who like to change the look of their model between sessions or scenes, and builders who enjoy adding small scenic details to a crawler.

How to Use / Care

1. Use it to decorate the roof of a crawler-style RC car.

How to Choose

Start with the scale of your crawler, since scale is the first thing to match before you pick any roof accessory. Next, choose a color that suits your build theme, because the color choices let you change the look from one build to the next. A waterproof, splash-proof fabric is a practical choice for models that run in damp ground. Finally, decide how much decoration you want, since this bag adds visual detail rather than internal storage space.

Frequently Asked Questions

What scale is it made for?
It is made for 1/8 and 1/10 RC crawler cars.

What is it made of?
It is made of Oxford cloth.

Does it have storage space inside?
It has no inner structure and cannot be opened, so it works as a decorative bag.

Is it waterproof?
The umbrella cloth fabric is waterproof, and the bag is splash-proof.

Does it need batteries?
It has no battery, and batteries are not included.

How many come in a pack?
It is one piece per pack.

Key Features

• Round Head M3 Screws — It includes 30 round head M3 * 10 screws.
• Flat Head M4 Screws — It includes 20 flat head M4 * 12 screws.
• M3 and M4 Nuts — It includes 20 M3 nuts and 20 M4 nuts.
• Gaskets and Anti-Shedding Rings — It includes 20 M3 gaskets, 20 M4 gaskets and 20 anti-shedding rings measuring φ8*φ4*2mm.
• Wheel Hub Nut Pins — It includes 20 wheel hub nut pins measuring 2x10mm.

Product Specifications

• Material: Metal
• Pack Count: 500pcs
• Scale: 1; 1/8, 1/10, 1/12
• Age Range: 14+y,6-12Y

What It Is / How It Works

This RC screw kit is a set of assorted hardware fasteners for radio-controlled model cars. The set is made of metal and combines screws, nuts, gaskets and small pins in one pack.

Who It's For / Use Cases

Assorted RC screw kits suit hobbyists who build, maintain or repair radio-controlled models and need a range of small M3 and M4 fasteners on hand. They also suit anyone who prefers to keep one mixed set of spare hardware for model projects.

How to Use / Care

1. Use the screws, nuts, gaskets and pins to fasten RC model parts.

How to Choose

Start with thread size, since the set includes M3 and M4 nuts, screws and gaskets. Match each screw to the threaded hole it will enter. Choose round head or flat head screws based on the part you are fastening, and pick a length that fits the material thickness. The listed age range is 14+y,6-12Y, so review that range before giving the set to a child.

Frequently Asked Questions

What screw sizes are in the set?
It includes round head M3 * 8, M3 * 10, M3 * 12 and M3 * 16 screws, flat head M3 and M4 screws, and M3 * 3 and M4 * 4 screws.

What material is it made of?
It is made of metal.

What age range is it for?
The listed age range is 14+y,6-12Y.

Does it need batteries?
It has no battery and is not electric.

Which nuts are included?
It includes 20 M3 nuts and 20 M4 nuts.

Key Features

• Several Arm Sizes — The set has arms in several sizes, such as 30*8mm, 21*5.8mm, 31*5.8mm and 56*8mm.
• Screws in Several Sizes — The set has M1.7, M2, M2.5 and M3 screws, so the arms can be fitted with matching fasteners.
• 25T and 28T Splines — It has 25T and 28T horn gear splines, so it can match servo horns with either spline count.

Product Specifications

• Material: Plastic
• Plastic Type: PC
• Horn Gear Spline: 25T, 28T
• Arm Sizes: 30*8mm, 21*5.8mm, 31*5.8mm, 56*8mm and others

What It Is / How It Works

This RC servo arm set is a group of plastic steering gear accessories, with arms in several sizes and matching screws.

Servo arms pass a servo's movement to the linkage of a radio-controlled model, so the right arm length and spline count matter when one is replaced.

Who It's For / Use Cases

Servo arm sets suit RC hobbyists who build, repair or upgrade radio-controlled cars, drones, planes and boats, and who need spare steering arms in different lengths. Hobbyists who maintain several models often keep a range of arm sizes on hand so each servo fits its linkage.

How to Use / Care

1. Use it to fit a spare arm on an RC steering servo.

How to Choose

Start with the spline count. The set has 25T and 28T horn gear splines, so match the count to your servo horn before choosing an arm.

Match the screw size to the arm hole as well.

Frequently Asked Questions

What spline count does the set have?
It has 25T and 28T horn gear splines, so both spline counts are covered.

What arm sizes are in the set?
The set lists arms such as 30*8mm, 21*5.8mm, 31*5.8mm and 56*8mm, with other sizes in the same range.

Which screws are listed?
The set lists M2.5*14 and M3*5 screws, along with M1.7, M2 and M2.5 screws in other sizes, as shown in the screw size specification.

Does the set need a battery?
It does not include batteries, and the set is a mechanical accessory for a servo.

Key Features

• Multiple Model Types — It is for RC car, plane and boat models, so it suits servo wiring in those radio-controlled builds.
• Single Piece Pack — One piece comes in each pack, so you can add a single lead to a build without extra parts.
• Three Lengths — The cable is available in 15cm, 30cm and 50cm lengths, so you can match the run to the distance in your model.
• Servo Extension Wire — It is a servo extension wire cable that lengthens the lead between a servo and its receiver connection.

Product Specifications

• Piece Count: 1pcs
• Dimensions: 15cm/30cm/50cm
• Compatible With: RC car, plane and boat models; Futaba JR Male

What It Is / How It Works

This is a servo extension wire cable for radio-controlled models. Servo extension cables are used to add length between a servo and its receiver lead. This one comes as one piece per pack in 15cm, 30cm and 50cm lengths.

Who It's For / Use Cases

Servo extension cables suit radio-controlled hobbyists who build, rewire or repair RC cars, planes and boats and need a little more length between a servo and its receiver lead. Modelers who keep spare leads on hand for different builds will find several lengths useful when the distance between components changes from one model to the next.

How to Use / Care

1. Use it as a servo extension to connect a servo to a receiver in RC car, plane or boat builds.

How to Choose

Choose the length by measuring the distance between the servo and the receiver in your build, then pick the next length up so the lead is not pulled tight. A shorter lead keeps wiring tidy in compact models, while a longer one gives more room in larger chassis. Confirm the connector ends match your servo and receiver before you buy.

Frequently Asked Questions

Which models is it for?
It is for RC car, plane and boat models, so it suits servo wiring in those radio-controlled builds.

How many come in a pack?
There is one piece per pack.

What lengths does it come in?
It comes in 15cm, 30cm and 50cm lengths, so you can match the run to the distance between your servo and receiver.

What does the cable do?
It is a servo extension wire cable, so it lengthens the lead between a servo and its receiver connection in a radio-controlled build.

Key Features

• Control Panel Use — It can be applied to control panel cable remotes.
• Male to Female Ends — It is male to female, so it extends a servo lead.
• Tinned Copper Interior — The interior is tinned copper, which gives good transmission and low resistance.
• Futaba and JR Compatible — It is compatible with Futaba and JR servos.

Product Specifications

• Piece Count: 1PCS
• Dimensions: 20cm/30cm/50cm
• Age Range: 14+y,6-12Y
• Power: No battery

What It Is / How It Works

This RC servo extension wire is a 1PCS cable with JST male to female connectors, sold in 20cm, 30cm and 50cm lengths.

Servo extension wires carry a servo lead from a receiver to a servo in radio-controlled models, so the reach and connector type decide whether the lead fits the layout.

Who It's For / Use Cases

Servo extension wires suit hobbyists who build, wire or repair radio-controlled cars, planes and helicopters and need a little more reach between a receiver and a servo. They also suit anyone maintaining a control panel setup that needs a male to female lead.

How to Use / Care

1. Use it to extend a servo lead between a receiver and a servo in an RC model.

How to Choose

Start with length. The cable comes in 20cm, 30cm and 50cm, so pick the length that covers the distance between the receiver and the servo with a little slack.

Splitter-style cables are generally chosen by the number of outputs, so match that count to the number of servos you plan to connect.

Frequently Asked Questions

How long is the cable?
It comes in 20cm, 30cm and 50cm lengths, so you can choose the one that covers your run.

Does it come with a battery?
No battery is included, and the cable has no battery of its own.

Is it compatible with Futaba and JR servos?
Yes, the connectors are made for Futaba and JR servo connections, and they also suit plane and helicopter servo or receiver connections.

What is the inside of the connector made of?
The interior is tinned copper, which gives good transmission and low resistance.

What can the cable be used for?
It is suited to jumping from board to board, and it can be applied to control panel cable remotes.

Key Features

• Double-Sided Driving — It can drive on both sides of the car, so the stunts can continue from either side.
• 360° Rotation — It can rotate 360 degrees for stunts and turns during play.
• Four-Wheel Drive — It has four-wheel drive, so all four wheels can drive the car.
• 2.4G Remote Control — The 2.4G remote control lets you drive the car from a distance.

Product Specifications

• Material: Plastic
• Age Range: ≥6 years old
• Dimensions: 15 × 16 × 7.5 cm (5.9 × 6.3 × 2.95 in)
• Package Size: 25.5 × 17 × 8 cm (10 × 6.7 × 3.15 in)
• Body battery: 1 3.7V lithium battery (included)
• Remote control batteries: 2 AA batteries (not included)
• Warning: Choking hazard from small parts. Not for children under 3 years.

What It Is / How It Works

This is a remote control stunt car for kids and adults. The car body is made of plastic and runs on a 3.7V lithium battery, and it is driven with a handheld 2.4G remote control. Remote control toy cars of this type are built for driving games, stunts and off-road play.

Who It's For / Use Cases

Remote control stunt cars suit children who enjoy driving games, flips and spins. The car is recommended for ages 6-12 and 14 and up, and parents should accompany young children during play.

How to Use / Care

1. Insert 2 AA batteries into the remote control, which are not included.
2. Charge the car battery with the included USB cable.
3. Use the remote control to drive the car forward, backward, left and right.

How to Choose

Choose this type if you want stunt and drift driving with a remote that works from a distance.

Frequently Asked Questions

What age is this car for?
Recommended for ages 6 years and older. Parents should accompany young children during play.

Are batteries included?
The car has a 3.7V lithium battery included. The remote control needs 2 AA batteries, which are not included.

How is the car charged?
The package includes a USB cable for charging the car battery.

What comes with the set?
The set includes one remote control, one car, a charging cable and a user manual.

Is there a choking warning?
It has small parts that are a choking hazard. It is not for children under 3 years.

Key Features

• Winch Hook With Pull Strap — It is a winch hook with a pull strap, made for RC car winch use.

Product Specifications

• Material: Metal
• Package Contents: 1 x RC Car Winch Hook with Pull Strap

What It Is / How It Works

This RC winch hook with pull strap is a metal hook accessory for 1/10 scale RC crawler cars.

How to Use / Care

1. Use it as a winch hook with a pull strap on a 1/10 scale RC crawler.

Frequently Asked Questions

What material is it made from?
It is made of metal, and the hook body is metal.

Does it need a battery?
No batteries are included, and the item is non-electric. It has no power source of its own and runs with no battery.

What does the package contain?
The package has one RC car winch hook with a pull strap. Only the listed package content is included.

Key Features

• Multi-Console Fit — It fits PlayStation Portable, PlayStation VITA, PlayStation 2, PlayStation 3 and PlayStation 4 consoles.
• RCA Audio Video Signal — It carries RCA audio and video connections for routing a console to a monitor or TV.

Product Specifications

• Piece Count: 1 pc
• Model: For PS2 PS3; PS1 PS2 PS3
• Length: 1.8M

What It Is / How It Works

This RCA audio video cable adapter is a 1.8M cord for PlayStation consoles. Cable adapters of this kind join an RCA audio video connection between a console and a display.

Who It's For / Use Cases

RCA audio video cable adapters suit PlayStation owners who need a longer or split connection between a console and a monitor or TV. They suit setups where the console sits too far from the display for a standard cable, or where the cable run needs a splitter at one end.

How to Use / Care

1. Use it to extend an RCA audio video connection between a compatible console and a monitor or TV.

How to Choose

Start with the console you own and check it against the Compatible Sony Model row in Specifications. Next, measure the distance between the console and the display and compare it with the 1.8M length.

Frequently Asked Questions

Which consoles does it work with?
The Compatible Sony Model row lists PlayStation Portable, PlayStation VITA, PlayStation 2, PlayStation 3, PlayStation 4, PlayStation and PlayStation 3.

How long is the cable?
The length is 1.8M.

How many pieces come in one pack?
One piece is in the pack.

Does it carry audio and video?
It carries RCA audio and video signals, as its title states, for a connection between a console and a monitor or TV.

Who is the brand?
The brand is JCD.

This RCA digital coaxial audio cable connects your subwoofer, amplifier, or other audio devices with a simple 1RCA male to 1RCA male connection. The nylon braided exterior adds durability and helps reduce signal interference for clearer sound.

Whether you are setting up a home theater system or connecting a DVD player to a TV, this cable delivers lossless audio quality. It works with speakers, computers, microphones, multimedia systems, projectors, televisions, TV boxes, and amplifiers. The 4.6mm outer diameter makes it flexible enough to route around furniture and equipment.

The gold-plated RCA connectors ensure a secure fit and resist corrosion over time. This cable is designed for everyday use, offering a reliable connection for stereo audio signals without signal dropouts.

This cable is CE certified, meeting safety and performance standards. It is a practical choice for anyone looking to extend or replace an existing RCA audio cable in their setup.

Key Features and Benefits

- Nylon braided exterior that protects the cable from wear and tear while reducing interference

• 1RCA male to 1RCA male connectors that fit standard subwoofer and audio inputs

• Gold-plated connectors that resist corrosion and maintain a stable signal over time

• 4.6mm outer diameter that allows flexible routing in tight spaces

• Lossless sound quality that preserves audio detail for movies and music

Who Is This For

- Home theater enthusiasts who need a reliable subwoofer cable

• Music lovers connecting a turntable or amplifier to speakers

• Gamers linking a console to a soundbar or AV receiver

• Professionals setting up audio equipment for presentations or events

Usage Scenario

Mark recently upgraded his home theater system. His new subwoofer sat across the room from the AV receiver, and the included cable was too short. He picked up this RCA coaxial cable, routed it along the baseboard, and connected it in seconds. The nylon braid matched his setup's look, and the audio came through clean and deep. No hum, no static, just the bass he wanted.

Micro Comparison

Unlike basic PVC cables that can tangle or crack over time, this cable uses a nylon braided jacket for extra flexibility and protection. The gold-plated connectors also offer better corrosion resistance than standard nickel-plated options, helping maintain signal quality longer.

Specifications

Connector A: RCA Male

Connector B: RCA Male

Outer Diameter: 4.6mm

Certification: CE

Type: Audio Line

Package Includes

- 1 x RCA Digital Coaxial Audio Cable

Why You Will Love It

You get a durable, flexible cable that delivers clean audio without the hassle of interference. The nylon braid looks great and lasts longer than standard cables, so you can set it up and forget it. It is a simple upgrade that makes your audio system sound its best.

Questions and Answers

Question: Can I use this cable for video signals?

Answer: This cable is designed for audio signals, including subwoofer and stereo audio. It may work for composite video, but it is not optimized for high-definition video.

Question: How long is this cable?

Answer: The length is not specified in the product details. Please check the listing for available length options.

Question: Is this cable compatible with a standard home theater receiver?

Answer: Yes, it works with most receivers, amplifiers, and subwoofers that have RCA inputs.

Question: Does the nylon braid make the cable stiff?

Answer: No, the nylon braid adds protection without making the cable rigid. It remains flexible enough for easy routing.

Question: Will this cable reduce static or humming noise?

Answer: The nylon braiding and gold-plated connectors help reduce interference, which can minimize static or humming in many setups.

Key Features

• Flexible Nylon Build — The antenna is made of nylon, which gives it high toughness and lets it bend and straighten without breaking.
• Restores After Bending — It can be manually straightened after deformation from overturning or collision, so it keeps its shape for display.
• Wide Scale Fitment — It fits 1/8, 1/10, 1/12, 1/14, and 1/18 scale RC crawlers, including Traxxas and Axial SCX10 D90 models.
• Adjustable Length — The antenna length ranges from 97mm (3.8 in) to 145mm (5.7 in), so it can be set to match the look of different RC bodies.

Product Specifications

• Material: Nylon
• Size: 97mm (3.8 in)-145mm (5.7 in)
• Piece Count: 1 pcs
• Model: RCDream
• Age Range: 14+y

What It Is / How It Works

This is a simulation antenna decoration signal line for 1/8, 1/10, 1/12, 1/14, and 1/18 scale RC crawlers. It is made of flexible nylon and comes as one piece per pack.

Who It's For / Use Cases

RC crawler owners who want a realistic antenna look on their Traxxas, Axial SCX10, or D90 bodies will find this part useful. It suits builders who display their trucks and want a detail that can survive rollovers without permanent damage.

How to Use / Care

1. Attach the antenna to the RC car body in the desired position.
2. Bend the antenna to the angle or curve that matches the scale look.
3. If the antenna becomes deformed during transport or use, straighten it by hand.
4. Store the RC car in a way that avoids crushing the antenna when not in use.

How to Choose

Choose the antenna length based on the scale of your RC crawler and the look you want.

Frequently Asked Questions

What material is the antenna made of?
It is made of nylon, which is flexible and tough.

What RC scales does this antenna fit?
It fits 1/8, 1/10, 1/12, 1/14, and 1/18 scale RC crawlers.

Can the antenna be straightened if it bends?
Yes, it can be manually straightened after deformation from overturning or collision.

How long is the antenna?
The length ranges from 97mm (3.8 in) to 145mm (5.7 in).

How many antennas are included?
One piece is included per pack.

Key Features

• Vehicle-Specific Fit — It fits the Golf 7, 7.5, MK7 and MK7.5 from 2013 to 2020, and it is a vehicle specific fit part.
• Folding Clip Design — It is a folding clip type part for the rear air conditioning vents.
• ABS Construction — It is made of ABS plastic.

Product Specifications

• Material: ABS
• Color: Black
• Part name: Rear A/C Air Conditioning Vents Folding Clip
• Automotive fit type: Vehicle specific fit
• Part number: 5G0819203

What It Is / How It Works

This rear AC air vent grill is a car interior part for the rear air conditioning vents. It is a folding clip type part made of black ABS. Replacement vent parts of this kind are sold to restore the look and fit of the rear air outlets when an original piece is worn or lost.

Who It's For / Use Cases

Owners of Golf 7, 7.5, MK7 and MK7.5 cars from 2013 to 2020 who need a replacement rear air conditioning vent grill will find this part matches their vehicle. Car owners who maintain the interior of these models often look for this kind of rear vent piece when a clip breaks or a grill goes missing.

How to Use / Care

1. Fit the grill into the rear air conditioning vent of a Golf 7, 7.5, MK7 or MK7.5 from 2013 to 2020, using the folding clip to hold it in place.

How to Choose

Start by matching the vehicle model and model years to the fit details, since this is a vehicle specific part. Material and color are also useful to check, as this part is black ABS plastic.

Frequently Asked Questions

Which vehicles does it fit?
It fits the Golf 7, 7.5, MK7 and MK7.5 from 2013 to 2020.

What is the part number?
The OEM part number is 5G0819203.

What material is it made of?
It is made of ABS plastic and is black in color.

Is it a universal fit part?
No. It is a vehicle specific fit part, so the fit depends on the vehicle model and model years listed in the fit details.

Is it a new part?
Yes. The item is brand new and has a folding clip design for the rear air conditioning vents.

Key Features

• ABS Construction — It is made of ABS plastic.
• Black Finish with Chrome — The sleek pure black finish has chrome accents that add contrast to the grille area.
• Long-Lasting Durability — The grille cover offers long-lasting durability for everyday driving.

Product Specifications

• Material: ABS
• Color: Black
• Size: 45*16*8
• Compatibility list: BMW X5 F15 models produced between 2012 and 2018; Golf
• Part number: 100014236

What It Is / How It Works

This black ABS grille cover is a trim piece that sits in a front grille opening. Grille covers in this category are fitted over an opening to give the front of a vehicle a finished look.

Who It's For / Use Cases

Grille covers of this type suit vehicle owners who want to replace or refresh a worn or mismatched grille trim piece. They also suit anyone maintaining the exterior trim of a vehicle who wants a black finish that matches the existing front styling.

How to Use / Care

1. Use it as a front grille cover on the BMW X5 F15 models listed in Product Specifications.

How to Choose

Start with the vehicle. Confirm that the model and production years match the BMW X5 F15 range from 2012 to 2018 listed in the specifications.

Frequently Asked Questions

What is it made of?
It is made of ABS plastic.

What color is it?
It is black, with chrome accents on the finish.

Which vehicles is it designed for?
It is designed for the BMW X5 F15 models produced between 2012 and 2018. Check the model and year against your vehicle before you order.

What size is it?
The listed size is 45*16*8.

What is the part number?
The part number is 100014236.

Key Features

• Replacement Part — It is a replacement part for rear AC air vent grille tabs, clips and sliders.
• PC and ABS Build — It is made of PC and ABS, with a rubberized coating.
• Left and Right Drive — It can fit left-hand steering wheel cars (LHD) and right-hand steering wheel cars (RHD).

Product Specifications

• Material: PC and ABS, rubberized coating
• Steering wheel: Left-hand (LHD) and right-hand (RHD) steering wheel cars
• Year: 2007-2015
• OEM number: Black 204 830 0354 9051-1; Almond 204 830 0354 8N84-1; Gray 204 830 0354 7E94-1; Moka 204 830 4354 8N85-1

What It Is / How It Works

This is a rear AC air vent grille clip, tab and slider repair kit for Mercedes Benz W204 C Class, X204 GLK, W212, W207 and E Class cars.

Who It's For / Use Cases

Owners of Mercedes Benz W204 C Class, X204 GLK, W212 and W207 E Class cars who need to replace a rear air vent grille tab, clip or slider are the intended buyers. The kit suits both left-hand and right-hand steering wheel cars.

How to Use / Care

1. Use it to repair the rear AC air vent grille tab, clip and slider on the Mercedes Benz W204, X204, W212 and W207 models.

How to Choose

Start with the model and model years of your car, then check the Year row in Product Specifications. Left-hand and right-hand steering wheel cars are both covered by the fit information, so steering side is a fit check you can confirm from your own vehicle. For colour, compare the four OEM numbers in Product Specifications with the trim of your car and choose the matching black, almond, gray or moka option.

Frequently Asked Questions

Which Mercedes Benz models does it fit?
It is made for the Mercedes Benz W204 C Class, X204 GLK, W212 and W207 E Class. Model years are given in Product Specifications under Year.

Does it work on left-hand and right-hand drive cars?
It can fit left-hand steering wheel cars (LHD) and right-hand steering wheel cars (RHD), so steering side does not rule it out.

What is it made of?
The kit is made of PC and ABS, with a rubberized coating.

What colours are available?
The part numbers are grouped under four colours: black, almond, gray and moka. Each colour has its own OEM number in Product Specifications.

Key Features

• Mitsubishi Outlander Fit — It is designed for the Mitsubishi Outlander 2019–2021 and fits the center console area for a seamless integration.
• ABS Construction — The clip is made from ABS plastic.
• Rear Vent Replacement — It works as a replacement part for the rear air vent blade.
• Rear Airflow Direction — It helps direct airflow to the rear seat passengers.

Product Specifications

• Fitment: Mitsubishi Outlander 2019–2021
• Material: ABS
• Color: Black
• Pack: 1 piece

What It Is / How It Works

This rear AC vent clip is a replacement part for the rear air vent blade on the Mitsubishi Outlander model years 2019 through 2021. It is made from ABS plastic in black.

Who It's For / Use Cases

Rear vent clips suit vehicle owners who need to replace a worn, loose or broken rear air vent blade and want a part that matches the original vent. They also suit anyone who maintains the rear cabin airflow setup and wants a single replacement piece rather than a full vent assembly.

How to Use / Care

1. Confirm the vehicle is a Mitsubishi Outlander from 2019 to 2021 before fitting the clip to the rear air vent.
2. Fit the clip in place of the rear air vent blade. The fitting is described as simple, needing no additional tools or modifications to the vehicle.

How to Choose

Start with the vehicle. Next, look at the rear air vent you are replacing to see whether a single vent blade clip is the part you need. Black matches the interior color of many cabin trims, so check your current trim if a close color match matters to you.

Frequently Asked Questions

Which vehicle is this clip for?
It is for the Mitsubishi Outlander 2019–2021. The fitment is designed for the center console area so the clip integrates with the rear vent setup.

What material is the clip made from?
It is made from ABS plastic and comes in black.

Does the clip need power or a battery?
No. It is not charged and uses no battery, so it works as a passive mechanical part.

Does installation require tools?
The installation is described as simple, without the need for additional tools or modifications to your vehicle.

How many pieces are in one order?
One piece is included in each pack, and it is the air vent clip itself.

Key Features

• Replacement Part — It is sold as a replacement for the rear air conditioning vent grille outlet cover panel.
• Upgraded Design — It has an upgraded design over the basic version of this cover panel.
• More Solid Build — The build is more solid, so the slider clip area feels firmer.
• Durable Build — It is designed to be not easy to break during regular handling and fitting.
• Rubberized Coating — The outer surface includes a rubberized coating.

Product Specifications

• Color: Black
• Material: PC and ABS
• Finish: Chrome plating
• Coating: Rubberized coating
• Application Car Models: Maserati Ghibli 2014-2020
• Year: 2014-2022
• OEM Number: 670021523
• Measurement tolerance: - Please allow 1-2mm differences because of the manual measurement.

What It Is / How It Works

This rear air conditioning vent grille outlet cover panel is an assembly with a slider clip, made as a replacement part for the rear console air conditioning outlet on a Maserati Ghibli.

Who It's For / Use Cases

Vent grille outlet cover panels suit vehicle owners who need to replace a worn, cracked or missing rear console air conditioning outlet cover. They also suit people who want a replacement that matches the original part's fit and finish, after checking the vehicle details against the product specifications.

How to Use / Care

1. Left Steering Wheel Cars (LHD) and Right Steering Wheel Cars (RHD) both can be used.
2. A slight difference from your used car's color is normal, because the replacement may not match an aged finish exactly.

How to Choose

Start with the vehicle. Match the Application Car Models and Year rows in Product Specifications to your car, and confirm the steering wheel side on your vehicle. Next, compare the material and finish, PC and ABS with chrome plating and a rubberized coating, against the part you are replacing. Check that the outer shape and clip position line up with the original piece before you buy.

Frequently Asked Questions

Can this cover panel be used on both left-hand and right-hand drive cars?
Yes. It can be used on both Left Steering Wheel Cars (LHD) and Right Steering Wheel Cars (RHD), so the steering wheel side does not limit the fit.

Which vehicle is this part made for?
It is made for the Maserati Ghibli, with the Application Car Models row reading 2014-2020. The Year row reads 2014-2022, so compare both against your car's model year before you order.

What is the cover panel made from?
It is made from PC and ABS, with a chrome-plated finish and a rubberized coating on the outer surface.

Does this part need a battery or power connection?
No. It is a non-powered part, so it needs no battery or power connection to work as a vent grille cover.

Is this an original part?
It is a replacement part rather than an original soft plastic part. It may differ slightly in appearance from the original, but it is built with a more solid feel and is not easy to break.

Key Features

• ABS Construction — It is made of ABS plastic for use on the rear air vent grill.
• Folding Clip Design — It is a folding clip for the air vent grill, a rear A/C vent fastener.
• One Piece Per Pack — The pack holds one piece.

Product Specifications

• Material: ABS
• Color: Black
• Compatible models: Golf 7 7.5 MK7 MK7.5 2013-2020
• Pack count: 1 piece
• Condition: Brand new
• Is it Powered: Non-powered
• Part numbers: 5GG819203, 5G0819203

What It Is / How It Works

This is an air vent grill folding clip, a replacement part for the rear A/C air conditioning vents. Vent grill folding clips are small plastic fasteners that hold a grill panel in place, so this clip is the part that keeps the grill secured.

Who It's For / Use Cases

Vent grill folding clips suit car owners who need to replace a broken or lost clip on a rear air vent grill. They are useful in repair work where the original clip has been lost or damaged and the grill needs to sit firmly again.

How to Use / Care

1. Use it to replace the folding clip on a rear A/C air vent grill.

How to Choose

Choose by vehicle first. The Compatible models row gives the Golf 7, 7.5, MK7 and MK7.5 range from 2013 to 2020, so confirm your car falls in that range. Black is the listed colour.

Frequently Asked Questions

Which vehicles does it fit?
The Compatible models row gives Golf 7 7.5 MK7 MK7.5 2013-2020, so the fit covers that range.

What is it made of?
It is made of ABS plastic.

What part numbers does it carry?
The part numbers are 5GG819203 and 5G0819203, listed in the Part number row.

How many come in a pack?
The pack has one piece.

Key Features

• ABS Construction — The trim is made of ABS plastic for the rear vent area.
• Folding Clip Design — It is a folding clip type trim for the rear air conditioning vent grill.
• Golf Model Fit — It is for Golf 7, 7.5, MK7 and MK7.5 models from 2013 to 2020.

Product Specifications

• Material: ABS
• Color: Black
• Compatible models: Golf 7, 7.5, MK7, MK7.5; 2013-2020
• Pack: 1 piece
• Condition: Brand new
• Is it Powered: Non-powered
• Part numbers: 5GG819203, 5G0819203

What It Is / How It Works

This rear air conditioning vent grill folding clip trim is a trim part for the rear A/C vent area of the Golf 7 range. It is made of ABS and is black.

Who It's For / Use Cases

Replacement trim parts suit car owners and workshops who need to replace a worn or missing rear cabin vent surround. They suit anyone who wants the rear air outlet trim to look complete again after a part has been lost or damaged, and they are a simple swap for people who prefer a direct replacement over repairing the old piece.

How to Use / Care

1. Use it as a replacement rear A/C vent grill folding clip trim in the rear air conditioning vent area.

How to Choose

Start with the vehicle. Confirm the Golf generation and years in the Compatible models row of Product Specifications before ordering. The Color row lists black, so choose this version if your existing rear vent trim is black. Clip-in trims of this kind are judged mainly by fit and finish, so the model and part number are the details to settle first.

Frequently Asked Questions

Which vehicles is it for?
It is for Golf 7, 7.5, MK7 and MK7.5 models from 2013 to 2020. The Compatible models row in Product Specifications lists the same models.

Is it powered or electric?
It is non-powered. It is a plain trim part with no electrical function.

What is it made of?
It is made of ABS plastic, and the color is black.

Does it carry a certification mark?
It carries the CE mark.

How many pieces come in one order?
One order contains one piece. The item is brand new.

Key Features

• Engineered Material — It is made of PA66+GF25+POM.
• Replacement Part — It is a replacement part for the rear air conditioning vent grill outlet.
• Left and Right Drive — It can be used on both left-hand drive and right-hand drive cars.
• Color Options — It comes in black, dark yellow and light gray.

Product Specifications

• Material: PA66+GF25+POM
• Color: Black, Dark Yellow, Light Gray
• Placement on Vehicle: Rear dashboard
• Compatible models: Mercedes-Benz A Class W176 (2013–2018), CLA Class W117 (2013–2019), GLA Class W156 (2015–2019), B Class W246 (2011–2019)
• OEM NO.: 2468300003, 2468300502, 2466801450, 2466803502, 2466801550, 2466803702, 1766800710, 1766800810, 1766802901, 1566802000

What It Is / How It Works

This rear air conditioning vent grill outlet repair kit is an automotive replacement kit for the rear air vents of Mercedes-Benz A, CLA, GLA and B Class cars.

Who It's For / Use Cases

Owners of the Mercedes-Benz models named in the Compatible models row who need a replacement rear air vent grill outlet part will find this kit suited to that job. It is a practical choice for drivers who want to restore the rear vent grill rather than replace the whole air conditioning unit.

How to Use / Care

1. Use it on left-hand drive or right-hand drive cars.
2. If you cannot replace the parts yourself, re-adjust them or take the car to a local professional maintenance store for installation.

How to Choose

Start with the Compatible models row in Product Specifications and match your car's model and year range. Both left-hand drive and right-hand drive cars can use it, so drive layout does not change the choice.

Frequently Asked Questions

Which cars is it made for?
It is for the Mercedes-Benz A Class W176 (2013–2018), CLA Class W117 (2013–2019), GLA Class W156 (2015–2019) and B Class W246 (2011–2019).

Does it work in left-hand drive and right-hand drive cars?
It can be used on both left-hand drive and right-hand drive cars, and it is placed on the rear dashboard.

What material is it made of?
It is made of PA66+GF25+POM.

What colors does it come in?
It comes in black, dark yellow and light gray.

What are the OEM numbers?
The OEM numbers are 2468300003, 2468300502, 2466801450, 2466803502, 2466801550, 2466803702, 1766800710, 1766800810, 1766802901 and 1566802000.

Key Features

• Direct Replacement — It replaces the original part and installs directly in its place.
• Upgraded Design — The vent grille panel has an upgraded design.
• PC&ABS Construction — It is made of PC&ABS with a rubber oil painted finish.
• Rear Vent Grille — It is the rear AC vent grille part for the rear console.

Product Specifications

• Color: Black
• Material: PC&ABS with rubber oil painting
• Compatible models: Mercedes Benz M/ML W166 (2011-2015); GL W166 (2012-2015); GLE W166 W292 (2015-2019); GLS W166 W292 (2016-2019)
• Steering wheel: Left-hand and right-hand steering wheel cars (LHD and RHD)
• Model code: W166 W292
• Year: 2011-2019
• OEM number: 166 830 0554
• Powered: Non-powered

What It Is / How It Works

This rear air vent grille repair kit is for Mercedes Benz M, GL, ML, GLE and GLS vehicles in the W166 and W292 model codes. It covers the rear console air vent grille, including its outlet tab, clip and slider area.

Who It's For / Use Cases

Parts like this suit owners who need to repair a worn or broken rear console vent grille or its tab and clip on a matching Mercedes Benz. They are also a practical choice for anyone who wants to match the model years and steering wheel layout before ordering.

How to Use / Care

1. Replace the original part with this one, since it installs directly in place of the original.

How to Choose

Start with your vehicle model code and model year, because the M/ML, GL, GLE and GLS entries cover different year ranges. Check these against the Compatible models row in Product Specifications. Next, match your steering wheel layout, since the part fits both left-hand and right-hand steering wheel cars.

Frequently Asked Questions

Which Mercedes Benz models does it fit?
It fits the Mercedes Benz M/ML W166 (2011-2015), GL W166 (2012-2015), GLE W166 W292 (2015-2019) and GLS W166 W292 (2016-2019).

Does it work for left-hand and right-hand drive cars?
It fits both left-hand (LHD) and right-hand (RHD) steering wheel cars.

What is it made of?
It is made of PC&ABS with a rubber oil painted finish.

Is it a direct replacement?
It replaces the original part and installs directly in its place.

What is the OEM number?
The OEM number is 166 830 0554.

Key Features

• Upgraded Design — It has an upgraded design for the rear AC vent grille panel.
• Solid Build — The outer frame has a solid build.
• No Sticky Feel — The surface does not feel sticky to the touch.
• PC and ABS Build — It is made of PC and ABS with a rubberized coating, not the original soft plastic material.
• Direct Replacement Part — It is made as a replacement for the original outer frame.

Product Specifications

• Compatible models: BMW 5 Series F10 and F11, 2010-2017: 520, 523, 525, 528, 530, 535; BMW 5 Series F10 F11 F18 2010–2017
• Color: Black, Gray, Oyster, Beige
• Material: PC and ABS with rubberized coating

What It Is / How It Works

This rear air conditioning vent grille panel cover is an outer frame replacement for the rear AC vent. It fits the BMW 5 Series F10, F11 and F18 from 2010 to 2017 and suits both left-hand and right-hand drive cars.

Who It's For / Use Cases

Replacement vent panel covers suit car owners who need a matching outer frame for a rear air conditioning vent. They are a practical choice for a BMW 5 Series of the 2010 to 2017 model years, where the rear vent panel needs replacing and a complete outer frame is the part being swapped.

How to Use / Care

1. Use it as a replacement outer frame for the rear air conditioning AC vent on a BMW 5 Series F10, F11 or F18 from 2010 to 2017.
2. Professional installation is recommended for this part.

How to Choose

Start by matching the model and year to your vehicle: the BMW 5 Series F10, F11 or F18 from 2010 to 2017. Choose the color that matches your interior trim. It comes in black, gray, oyster and beige, and it suits both left-hand and right-hand drive cars.

Frequently Asked Questions

Which BMW models does it fit?
It fits the BMW 5 Series F10 and F11 from 2010 to 2017, in the 520, 523, 525, 528, 530 and 535 applications. The model name is F10/F11/F18. Check the Compatible models row in Product Specifications before you order.

What colors does it come in?
It comes in black, gray, oyster and beige.

What is it made of?
It is made of PC and ABS with a rubberized coating. It is not the original soft plastic material.

Is it a replacement or an original part?
It is a replacement part. It may look different from the original part.

Key Features

• Replacement Part — Sold as a replacement part for the rear A/C vent outlet grille.
• Original Black Color — Finished in Original Black.
• PC and ABS Plastic — Made from PC and ABS plastic.
• Rubberized Coating — The material includes a rubberized coating.
• OE Number Check — Confirm the OE No. is correct against your parts before purchasing so it can be fitted to your car.

Product Specifications

• Color: Original Black
• Material: PC and ABS, rubberized coating
• OEM NO.: 166 830 0554-1, 166 680 0854 M, 166 830 0054 L
• Compatible models: Mercedes Benz W166 W292 ML350 GL450 ML GLE

What It Is / How It Works

This car rear air-conditioning vent outlet grille slide clip repair kit is a replacement part for the rear A/C vent outlet grille on Mercedes-Benz W166 models.

Slide clips are small retaining parts in a vehicle vent assembly that hold the grille in its track, so repair kits of this type are aimed at replacing those clips.

Who It's For / Use Cases

Car owners and independent repair shops who need to replace a rear vent grille slide clip on a Mercedes-Benz W166 tend to look for kits like this. Replacement clip kits suit people who prefer to fit a small part themselves, and people who would rather hand the job to a local repair store.

How to Use / Care

1. LHD and RHD are the same, so the kit can be used on either left-hand or right-hand drive cars.
2. If you cannot replace the parts well by yourself, you can re-adjust it or go to your local professional repairing store to install it.

How to Choose

Start by matching the OE number on the part you are replacing against the OE numbers listed for this kit, then check that your car falls within the W166 model range named Product Specifications (Compatible models). Material is PC and ABS with a rubberized coating, so compare that construction against the part you remove. The finish is Original Black.

Frequently Asked Questions

Does this kit work on left-hand and right-hand drive cars?
The listing states LHD and RHD are the same and the kit can be used on either.

What is the kit made of?
It is made of PC and ABS plastic with a rubberized coating, in Original Black.

How do I check that it matches my car?
Compare the OE No. 166 830 0554-1, 166 680 0854 M or 166 830 0054 L against the part you are replacing, and confirm it before purchasing so it can be fitted to your car.

What if I cannot fit the clips myself?
You can re-adjust the parts or take the job to your local professional repairing store to install it.

What certification is listed?
The listing shows ISO9000 certification.

Key Features

• Direct Replacement — It is a direct replacement for the rear air conditioning vent outlet tab clip.
• One-Pair Pack — The pack has one pair of rear air conditioning vent paddles.
• Flexible Clip — The clip is flexible and easy to use.
• Long Service Life — It is built to resist easy damage, which gives it a long service life.

Product Specifications

• Compatible models: Volvo S90 2015-2025; Volvo S90 2015–2026
• Color: Black
• Condition: 100% New
• Is it Powered: Non-powered
• Part number: 39844538

What It Is / How It Works

This rear air conditioning vent outlet tab clip is a replacement clip for the rear AC vent grille on the Volvo S90. It is a direct replacement part and the condition is 100% New.

Who It's For / Use Cases

Clips like this suit Volvo S90 owners who need to repair a rear air conditioning vent outlet tab or slider. They suit repair work where a direct replacement part is wanted, so the old tab can be swapped out rather than left in place.

How to Use / Care

1. Use it to repair a rear air conditioning vent outlet tab clip or slider.

How to Choose

Start with the vehicle. Confirm your car is a Volvo S90 in the 2015-2025 range given in Compatible models in Product Specifications. The colour is Black.

Frequently Asked Questions

Which vehicle is it for?
It fits the Volvo S90 for 2015-2025, as set out in Compatible models in Product Specifications.

Is it a direct replacement?
It is a direct replacement for the rear air conditioning vent outlet tab clip, and the condition is 100% New.

What comes in the pack?
The pack has one pair of rear air conditioning vent paddles.

Is it powered?
It is non-powered and works as a mechanical part.

What is the part number?
The part number is 39844538.

Key Features

• PC+ABS Construction — The tabs are made of PC+ABS, and the solid ABS and PC construction lowers the risk of breakage.
• Reinforced Thickened Slot — The slot is reinforced and flexible, and it resists breakage during prolonged use.
• Outlet Tab Replacement — You replace only the outlet tabs, which keeps vent adjustment working without replacing the whole vent.
• OEM Number Match — It is tailored to fit OEM number 1668300554.

Product Specifications

• Color: Black
• Material: PC+ABS
• OEM Number: 1668300554-L and 1668300554-R
• Kit Pieces: 6
• Compatible models: Mercedes Benz M/ML W166 2012-2015; GL W166 2013-2015; GLE W166 W292 2015-2019; GLS W166 W292 2016-2019

What It Is / How It Works

This is a rear air conditioning vent repair kit made of outlet tabs. It is for replacing the worn or broken tabs at the rear vent, so the vent can be adjusted again without replacing the entire vent assembly.

Who It's For / Use Cases

Repair kits like this suit owners of the listed Mercedes Benz models who have a cracked, broken or loose rear vent outlet tab. They suit people who want to fix one part of the vent rather than buy a full replacement assembly, and who want the replacement tabs to match their vehicle's model and year range.

How to Use / Care

1. Fit the reinforced slot of the replacement tab into the rear air conditioning vent when you replace the outlet tab.
2. Adjust the vent with the replaced tab in place, since the slot is built for prolonged use.

How to Choose

Choose the kit by model and year first. The W166 and W292 model ranges are listed in Product Specifications under Compatible models, so match them to your vehicle. Pick this kit when you need only the outlet tabs rather than a whole vent.

Frequently Asked Questions

Which Mercedes Benz models does it fit?
It fits Mercedes Benz M/ML W166 2012-2015, GL W166 2013-2015, GLE W166 W292 2015-2019 and GLS W166 W292 2016-2019. The Compatible models row in Product Specifications gives the same range.

What is it made of?
It is made of PC+ABS. The ABS and PC construction is solid and lowers the risk of breakage.

Do I have to replace the whole vent?
No. You replace only the outlet tabs, which keeps the vent adjustment working without replacing the entire vent.

Is the slot reinforced?
Yes. The slot is reinforced with good flexibility and resists breakage during prolonged use.

How many pieces are in the kit, and what are the OEM numbers?
The kit contains 6 pieces. The left and right OEM numbers are 1668300554-L and 1668300554-R, and the tabs are tailored to fit OEM number 1668300554.