Key Features

• Mini Scale Tools — These are mini scale tools made for RC car and RC garage displays.
• Realistic RC Scene — They make an RC car and RC garage look more realistic.
• Decorative Accessories — They are decorative scale accessories, not real tools.

Product Specifications

• Material: Composite Material
• Scale: 1
• Piece Count: 1 pcs
• Intended Use: Vehicles & Remote Control Toys
• Age Range: 14+y

What It Is / How It Works

These are mini scale tools, decorative accessories for RC cars and RC garage displays. They are not real tools.

Who It's For / Use Cases

Scale model hobbyists who run RC crawlers and build garage scenes often add small accessories like these to a setup. Display builders who arrange shelves or workbench scenes can use mini scale pieces to fill out a layout with detail.

How to Use / Care

1. Use it to decorate an RC car garage scene.

How to Choose

Match the scale to your RC car: these pieces are made for 1/10 and 1/12 scale models.

Each pack has one piece, and the piece is made of composite material, so choose the layout that suits your display.

It is made for cars and remote control toys.

Frequently Asked Questions

What scale are these made for?
They are made for 1/10 and 1/12 scale RC cars, so check your car's scale before you buy.

What material are they made of?
The pieces are made of composite material.

Are these real tools?
No. They are decorative scale accessories, not real tools.

How many pieces come in the pack?
Each pack has one piece.

What vehicles are they for?
They are intended for cars and remote control toys.

Key Features

• Abrasion, Rust and Water Protection — It gives protection against abrasion, rust and water.
• Anti-Oxidation Lubrication — It has anti-oxidation and anti-water properties, with high-speed lubrication and an anti-extrusion effect.

Product Specifications

• Age Range: 14+y

What It Is / How It Works

This RC car grease lubricant is a lubricant for the moving parts of remote-control vehicles. Lubricants of this kind are used on the axle, differential and gearbox areas of RC buggies, trucks and crawlers, where gear parts meet and move against each other.

Who It's For / Use Cases

Grease lubricants like this suit RC hobbyists who maintain buggies, trucks and crawlers. They suit owners who service the axle, differential and gearbox areas of a remote-control vehicle, and anyone who wants routine care for moving gear parts.

How to Use / Care

1. Use it to lubricate the axle, differential or gearbox of an RC buggy, truck or crawler.

How to Choose

Choose by the part you need to service: axle, differential or gearbox.

Frequently Asked Questions

What does it protect against?
It protects against abrasion, rust and water.

Which parts is it for?
It is for the axle, differential and gearbox areas of RC buggies, trucks and crawlers.

Does it need a battery?
It has no battery.

Does it offer anti-oxidation and anti-water properties?
It has anti-oxidation and anti-water properties, plus high-speed lubrication and an anti-extrusion effect.

Key Features

• Long Run Time — It can run continuously for a long time without refueling.
• Abrasion, Rust and Water Protection — It provides protection against abrasion, rust and water.
• Multi-Function Lubrication — It has anti-oxidation, anti-water, high-speed lubrication and anti-extrusion effects.
• Lubrication for RC Models — It gives lubrication protection for remote control models.

Product Specifications

• Intended use: Remote control cars only; not for real cars

What It Is / How It Works

This is a grease lubricant for remote control buggies, trucks and crawlers, sold for the axle, differential and gearbox parts of these models. It is made for remote control cars only and is not intended for real cars.

Who It's For / Use Cases

Hobbyists who run remote control buggies, trucks and crawlers often look for a lubricant for gears, axles and differentials. Lubricants of this type suit owners who want to keep moving metal parts running smoothly between runs and protect them from wear and moisture.

How to Use / Care

1. Use it on remote control cars only.
2. Do not use it on real cars; it is intended for non-real car use.

How to Choose

Choose a lubricant by the part it will work on. Grease-type lubricants are often chosen for gearboxes and differentials, where parts need a thicker coating, while oil-type lubricants are often chosen for lightly loaded moving parts. Check the model and the part you plan to lubricate, and pick the form that matches that part.

Frequently Asked Questions

What vehicles is it for?
It is for remote control cars only, not real cars.

How long can the vehicle run with it?
It can run continuously for a long time without refueling.

What does it protect against?
It provides protection against abrasion, rust and water.

What are its lubricating effects?
It has anti-oxidation, anti-water, high-speed lubrication and anti-extrusion effects.

What is the model number?
The model is R114.

Key Features

• Four Light Colors — It comes in red, white, yellow and green.
• Fits 1/10 RC Cars — It suits 1/10 RC cars such as the Axial SCX10 90046, TRX-4, Tamiya CC01 and D90, among others.
• Lightweight Build — Each piece weighs 4 g (0.14 oz).

Product Specifications

• Scale: 1/10
• Compatible With: 1/10 RC cars such as Axial SCX10 90046, TRX-4, Tamiya CC01 and D90, etc.
• Color: Red, White, Yellow, Green
• Piece Count: 1 pcs
• Net Weight: 4 g (0.14 oz)
• Dimensions: 4.5 mm (0.18 in)
• Age Range: 14+y

What It Is / How It Works

This RC car LED light is a spotlight and decoration lamp headlight for 1/10 scale RC crawlers. It is sold as one piece, and it is an LED lights upgrade part that suits RC cars such as the Axial SCX10 90046 and TRX-4.

Who It's For / Use Cases

RC car LED lights suit hobbyists who run 1/10 scale crawlers and want to add lighting to their builds. Hobbyists who customize their trucks with decoration lamps often choose small accessories like this one to add a lighting accent to a paint scheme or color theme.

How to Use / Care

1. Use it to add LED lighting to a 1/10 RC car.

How to Choose

Start with the RC model you own. Check the Compatible With row in Product Specifications to see which 1/10 RC cars are listed.

Frequently Asked Questions

What colors does it come in?
It comes in red, white, yellow and green.

Are batteries included?
No, batteries are not included. It has no battery of its own.

Which RC cars does it suit?
It suits 1/10 RC cars such as the Axial SCX10 90046, TRX-4, Tamiya CC01 and D90, among others.

How many pieces are in a pack?
One piece per pack. Each piece weighs 4 g (0.14 oz).

Who is it for?
It is for hobbyists who run 1/10 scale RC crawlers and want a small LED accent on their build. The age range listed is 14+y.

Key Features

• Four Light Colours — The lamps come in red, white, yellow and green, so you can pick the shade that suits your build.
• 1/10 Scale Fit — It suits 1/10 RC cars such as the Axial SCX10 90046, TRX-4, Tamiya CC01 and D90.
• Compact Lamp Size — Each lamp measures 4.5 mm (0.18 in).
• Unit Weight — Each lamp weighs 4 g (0.14 oz).
• One-Piece Pack — The pack holds one piece.

Product Specifications

• Scale: 1/10
• Compatible With: 1/10 RC cars such as Axial SCX10 90046, TRX-4, Tamiya CC01 and D90
• Color: Red, White, Yellow, Green
• Piece Count: 1 pcs
• Dimensions: 4.5 mm (0.18 in)
• Net Weight: 4 g (0.14 oz)
• Power: No battery

What It Is / How It Works

These are RC car LED spotlights, headlight-style decoration lamps sold for 1/10 RC crawler cars. They come in red, white, yellow and green.

Who It's For / Use Cases

Builders of scale crawlers who want a lit front end often look for lamps like these. Hobbyists who match lighting to a custom body can choose the colour that fits their look. Owners of other RC vehicles should check the Compatible With row in Product Specifications before buying.

How to Use / Care

1. Choose the colour from red, white, yellow and green that matches your build.

How to Choose

Start with the scale of your crawler and match the lamp to that scale, since scale-specific lights are sized for a given model. Choose a single colour or mix a few, depending on the look you want.

Frequently Asked Questions

Which RC cars is this light for?
It suits 1/10 RC cars such as the Axial SCX10 90046, TRX-4, Tamiya CC01 and D90.

What colours does it come in?
It comes in red, white, yellow and green.

Does it need batteries?
The lamp has no battery, and batteries are not included.

How big is each lamp and how much does it weigh?
Each lamp measures 4.5 mm (0.18 in) and weighs 4 g (0.14 oz).

How many come in a pack?
The pack holds one piece.

Key Features

• Built-In Resistor — A resistor is built in to help keep the lamp beads from burning out.
• Connects Light Set Receiver — The original light set connects to the Dumborc X6DC receiver through this adapter.
• Plugs Into Receiver — The original RC car signal cable connects to the adapter board, which then plugs into the Dumborc light set receiver.

Product Specifications

• Material: Composite Material
• Intended Use: Vehicles & Remote Control Toys
• Piece Count: 1 pcs
• Power: No battery
• Age Range: 14+y
• Compatible models: MN Series MN128 MN78 MN99S MN98 MN86 P6DC P6DCG 6CH

What It Is / How It Works

This RC car light set adapter is a small adapter board for MN series RC cars. It is made for the MN99S, MN99, MN98, MN78 and MN128 models and connects the original light set to the Dumborc X6DC receiver. Lamp adapter boards of this type sit between a toy car's original wiring and a replacement light set receiver.

Who It's For / Use Cases

RC hobbyists who run MN series trucks and want working lights often need a connector like this when they change to a Dumborc light set receiver. Parts shoppers who are repairing or upgrading lighting on a compatible toy car will find this type of adapter board useful for keeping the original light set while adding a new receiver.

How to Use / Care

1. Connect the original RC car signal cable to the adapter board.
2. Plug the adapter board into the Dumborc light set receiver.

How to Choose

Start with your RC car's model. Match it to the MN series models this adapter is made for, which are MN99S, MN99, MN98, MN78, MN128, MN86 and D90. Next, confirm that your light set receiver is a Dumborc X6DC type. Lighting adapters for toy cars are chosen by car model and receiver type, so these two points decide whether a board fits your setup.

Frequently Asked Questions

Does it need a battery?
No. The power details show no battery, so the adapter has no power source of its own.

What is included in the package?
One RC car light set adapter, with a piece count of 1 pcs.

Which RC car models is it made for?
It is made for MN99S, MN99, MN98, MN78 and MN128 RC cars, and it is also made for MN86 and D90 models.

What receiver does it connect to?
It connects the original light set to the Dumborc X6DC receiver, so the car's signal cable plugs into the adapter board and the board plugs into the receiver.

What certification does it carry?
It carries CE certification and is made of composite material for use with vehicles and remote control toys.

Key Features

• Aluminum Alloy Build — It is made of aluminum alloy, so the stand is built from metal rather than plastic.
• Adjustable Height Range — The height adjusts from 2.13 in (54 mm) to 3.23 in (83 mm) to suit the model you are working on.
• 360-Degree Rotating Platform — The platform rotates 360 degrees, so you can turn the model to reach each side.
• Repair and Display Use — You can use it as a repair stand while you work, or as a display stand that keeps your desktop organized.

Product Specifications

• Material: Aluminum Alloy
• Dimensions: Adjustable from 2.13 in (54 mm) to 3.23 in (83 mm)
• Scale: 1/16, 1/18, 1/24
• Weight: 63 g (2.22 oz)
• Piece Count: 1 pcs
• Color: Black, Blue, Red
• Compatible models: Axial Scx24 Fcx24 Traxxas Trx4m 1/16 1/18 1/24

What It Is / How It Works

This RC car repair stand is a workstation that holds a 1/16, 1/18 or 1/24 scale RC car while you work on it. It is made for RC trucks, crawlers and buggies.

Who It's For / Use Cases

RC hobbyists who service or display small-scale crawlers, buggies and trucks suit this type of stand. It gives a raised place to hold a model during maintenance and a tidy spot on the desk when the model is on show.

How to Use / Care

1. Adjust the height to suit your model, within 2.13 in (54 mm) to 3.23 in (83 mm).
2. Set the model on the platform and turn the platform to reach each side.
3. Use the stand as a repair stand while you work, or as a display stand to keep the model on the desk.

How to Choose

Start with the scale of your model, since the stand is made for certain scale ranges listed in Product Specifications. A stand with a rotating platform makes it easier to view or service the model from every side.

Frequently Asked Questions

What scales is this stand for?
It is made for 1/16, 1/18 and 1/24 scale RC trucks, crawlers and buggies.

What is the stand made of?
It is made of aluminum alloy.

Does the stand need batteries?
It has no battery and no power supply, and the package lists no batteries included.

How tall can the stand be set?
The height adjusts from 2.13 in (54 mm) to 3.23 in (83 mm).

Can the model be turned on the stand?
The platform rotates 360 degrees, so you can turn the model to reach each side.

Key Features

• One-Piece Stand — It comes as one piece per pack.

Product Specifications

• Material: Aluminum Alloy
• Piece Count: 1 pcs
• Scale: 1; 1/8, 1/10, 1/18, 1/24
• Vehicle Type: Cars
• Age Range: 14+y
• Compatible models: 1/8 1/10 1/18 1/24 Buggy Crawler

What It Is / How It Works

This RC car repair work stand is a one-piece holder made of aluminum alloy, built to raise a radio-controlled car for work on its chassis.

Who It's For / Use Cases

Radio-controlled car hobbyists who maintain their own vehicles are the typical buyers of a repair work stand. It suits a home workbench where a car needs to be held up for inspection, cleaning or repair, and it suits hobby groups that share a bench for car maintenance.

How to Use / Care

1. Use it as a repair station to hold a radio-controlled car at a raised height while you work on it.

How to Choose

Start by matching the stand to your car's scale. Check the Scale row in Product Specifications and compare the listed scales with your car before you buy. The listed material is aluminum alloy, and the stand has no battery, so it works as a bench tool. Choose it for the car sizes you already run and service at the bench.

Frequently Asked Questions

What is the stand made of?
It is made of aluminum alloy.

Does it come with batteries?
It does not include batteries. The stand has no battery and no power supply, so it works without power.

What vehicle type is it for?
It is for RC cars. The vehicle type listed is cars.

How many pieces are in a pack?
Each pack has one piece, a single stand.

What age range is the product for?
The age range listed for it is 14+y, so it is meant for buyers in that age range and older.

Key Features

• Adjustable Working Height — The stand adjusts from 3.54 to 5.11 inches, and its 360-degree rotation lets you turn the car while you work.
• Aluminum Screwdriver Handle — The handle is aluminum and uses a 6.35 quick self-locking connector, so bits load and unload quickly and stay secure.
• S2 Tool Steel Heads — The screwdriver heads are plated S2 tool steel, with hex, phillips and slotted sizes.
• Screw Set Assortment — The screw set covers round head, flat head, machine, gasket and nut, and accessory pieces for RC repairs.

Product Specifications

• Material: Aluminum and S2 tool steel
• Scale: 1/8, 1/10, 1/12, 1/16, 1/18
• Height Range: 3.54 inch to 5.11 inch
• Piece Count: 1 pcs
• Age Range: 14+y

What It Is / How It Works

A repair work stand holds a radio-controlled car off the bench so its underside and wheels are reachable. This RC car repair work stand comes with a set of hand tools and screws for servicing crawlers, trucks and buggies.

Who It's For / Use Cases

Hobbyists who service remote control crawlers, trucks and buggies at home often use a work stand so they can reach the drivetrain, steering and suspension without lifting the car by hand. A stand with adjustable height suits people who swap parts or check the chassis regularly.

How to Use / Care

1. Set the stand height between 3.54 and 5.11 inches to suit your car.
2. Use it to hold the RC car at a working height while you repair it.

How to Choose

Start with the scale of your RC car. The tools suit 1/8, 1/10, 1/12, 1/16 and 1/18 scale RC trucks, crawlers and buggies, so check that your model falls in that range before you buy.

Frequently Asked Questions

What scales does it suit?
It suits 1/8, 1/10, 1/12, 1/16 and 1/18 scale RC trucks, crawlers and buggies.

Does it need batteries?
No. It has no battery and is not battery powered, so no batteries are included.

What does the set contain?
It contains one RC repair stand, nine RC screwdrivers, one RC screws kit, one screwdriver handle, one screws pallet, one 6 in 1 wrench, one 4-in-1 cross sleeve, tweezers and one magnetizer.

What is it made of?
The stand and tools are made of aluminum and S2 tool steel.

What age is it for?
The age range is 14 and up.

Key Features

• Metal Build — This jack is made of metal for stable and durable use.
• Precision Crafted — Components are processed with high precision to support quality and durability.
• Model Compatibility — Suitable for models such as Axial SCX10, D90, CC01, and TRX4.
• Single Piece — This listing includes 1 piece.

Product Specifications

• Material: Metal
• Size: 1.96in*6.8*2.67in;3.7cm
• Piece Count: 1 pcs
• Age Range: 14+y
• Power: No battery

What It Is / How It Works

This is a metal scale jack stand for RC cars, designed to lift and support model vehicles during maintenance or display. It is a single-piece accessory that pairs with compatible RC models.

Who It's For / Use Cases

RC hobbyists who own scale crawlers or trail trucks will find this jack useful for raising their model for tire changes, chassis work, or simply posing it on a workbench. It suits builders who value realistic details and sturdy support during maintenance.

How to Use / Care

1. Place the jack on a flat, stable surface near the wheel you want to lift.
2. Position the jack under the axle or chassis rail of the RC car.
3. Raise the jack until it supports the vehicle securely, then perform your maintenance or display setup.

How to Choose

When selecting a scale jack, consider the size of your RC model and the weight it needs to support. Check the dimensions of the jack against your vehicle's ground clearance and axle height. For compatibility, refer to the Product Specifications for size details.

Frequently Asked Questions

What material is this jack made of?
The jack is made of metal, which provides stability and durability during use.

How many pieces are included?
This listing includes 1 piece.

Does this jack require batteries?
No, it does not require batteries. It is a manual tool.

What is the size of this jack?
The size is 1. 96in*6. 8*2. 67in;3. 7cm. Please note that the photo may not show actual size, so refer to the size details in the description.

Key Features

• Stainless Steel Build — The clips are made of 304 stainless steel.
• 50-Piece Set — The set includes 50 pieces, so several spares come in one pack.
• TRAXXAS SCX10 Fit — It is fixed for the TRAXXAS SCX10 RC car.
• Model-Matched Choice — Choose the specification that matches your own car model.

Product Specifications

• Material: 304 stainless steel
• Piece Count: 50pcs/set
• Scale Marking: 1/5, 1/6, 1/7, 1/8, 1/8, 1/12, 1/16, 1/14
• Age Range: 14+y

What It Is / How It Works

These are RC car shell body clips, sold as a 50-piece set of clips, pins and buckles. They are made of 304 stainless steel and are fixed for the TRAXXAS SCX10 RC car.

Who It's For / Use Cases

Body clip sets like this suit RC hobbyists who maintain or rebuild a shell body and want spare clips, pins and buckles on hand. They also suit owners who work on more than one scale of RC car and need several sizes of fixings in a single set.

How to Use / Care

1. Use the clips, pins and buckles to fix RC car shell bodies in place.

How to Choose

Choose by your car model first, since the specification should match it. Check the scale markings listed in the specifications so the set matches your RC car's scale.

Pick the set by the parts you need to replace. A 50-piece set suits repairs that need several spares at once.

Frequently Asked Questions

What material are the clips made of?
They are made of 304 stainless steel.

How many pieces are in the set?
The set has 50 pieces, supplied as 50pcs/set.

Which RC car is it fixed for?
It is fixed for the TRAXXAS SCX10 RC car.

Are batteries included?
No, batteries are not included, and the set has no battery power.

What age range is the set for?
The age range is 14 years and up.

Key Features

• Aluminum and Plastic Build — The damper is made of aluminum and plastic.
• Smooth Damping Action — As a shock absorber damper, it provides smooth damping for RC car suspension travel.
• Four-Piece Pack — Each pack contains four shock absorber dampers, so one set covers several suspension positions.
• Five Length Options — Available lengths are 70, 80, 90, 100 and 110mm, so you can match the length to your build.
• Scale Crawler Fit — It is made for 1/10 scale RC crawler cars.

Product Specifications

• Piece Count: 4PCS
• Scale: 1/10
• Size Options: 70/80/90/100/110mm
• Material: Aluminum and Plastic
• Color: Black/Red
• Suitable For: 1/10 RC Crawler Car
• Compatible models: 1/10 RC Crawler Axial SCX10 II RBX10 Wraith TRX4 Redcat

What It Is / How It Works

This is a shock absorber damper for 1/10 scale RC crawler cars, sold as a set of four pieces in lengths from 70mm to 110mm. Shock absorber dampers are fitted between the chassis and the suspension on RC crawlers, where they control how quickly the suspension moves.

Who It's For / Use Cases

Hobbyists who rebuild or tune the suspension on a scale RC crawler often look for replacement shock absorber dampers. Buyers who want a spare set on hand, or who need to test a different length on their chassis, tend to look for a full pack rather than a single piece.

How to Use / Care

1. Use the shock absorber damper on a scale RC crawler car suspension, matching the length to the chassis.

How to Choose

Start with length. Measure the existing damper or the mounting span on your chassis, then choose the length from the available sizes that is closest to it.

Check material and colour next. The damper is made of aluminum and plastic, and the set comes in black or red, so pick the colour that suits your build.

Frequently Asked Questions

What lengths are available?
The set comes in 70, 80, 90, 100 and 110mm. Choose the length closest to the mounting span of the damper you are replacing.

Does it need a battery?
No battery is needed. It is a mechanical damper, so no power source is involved in its use.

How many pieces come in a pack?
The pack contains four pieces (4PCS), each a shock absorber damper for the suspension.

What is the damper made of?
It is made of aluminum and plastic. The set comes in black or red.

Which vehicles is it intended for?
It is intended for 1/10 scale RC crawler cars and is sold as a car suspension part.

Key Features

• Super Sticky Hold — It is super sticky for a firm bond.
• Quick-Drying Formula — It dries quickly after you apply it.
• Pointed Nozzle Tip — The pointed nozzle has an extra-long tip for precise application with less dripping, and it reaches hard-to-reach surfaces.

Product Specifications

• Material: Composite Material
• Net Content: 20 g (0.7 oz)
• Net Weight: 35 g (1.23 oz)
• Length x Width: 98mm x 29mm
• Piece Count: 1 pcs
• Package Contents: 1 x RC Car Tire Glue, 1 x Pointed Nozzle
• Age Range: 14+y

What It Is / How It Works

This is an RC car tire glue, an instant adhesive that comes as a clear liquid. It is super sticky, quick-drying, waterproof and fast curing. It is sold in a 20 g (0.7 oz) pack with a pointed nozzle.

Who It's For / Use Cases

Instant tire glues suit RC hobbyists who maintain or repair radio-controlled cars and want a clear adhesive that sets quickly. Hobbyists working on off-road buggies and similar models often need a fine nozzle to reach tight spots around wheels and tires.

How to Use / Care

1. Apply a small amount through the pointed nozzle to the part you want to bond.
2. Press the pieces together and hold them until the glue sets.
3. Use the glue for bonding RC car parts as an instant adhesive.

How to Choose

Choose by the amount you need, since each pack holds 20 g (0.7 oz) of glue. For fine work on tires, a precise tip helps place small amounts where you want them.

Frequently Asked Questions

What is the glue made of?
The glue is made of composite material.

Is it waterproof?
It is waterproof and fast curing.

What comes in the pack?
The pack has one RC car tire glue and one pointed nozzle.

How much glue is in a pack?
Each pack holds 20 g (0.7 oz) of glue. The listed weight is 35 g (1.23 oz).

Does it need a battery?
It needs no battery.

Key Features

• Super Sticky Bond — The glue is super sticky, giving a firm grip on the parts it joins.
• Quick-Drying Formula — It dries quickly after application.
• Waterproof and Fast Curing — It is waterproof and cures fast.
• Pointed Nozzle Tip — The pointed nozzle is made for precise application without dripping everywhere, and the extra-long tip reaches hard-to-reach surfaces.

Product Specifications

• Piece Count: 1 pcs
• Net Weight: 20 g (0.7 oz)
• Dimensions: Length 98mm, width 29mm
• Material: Composite Material
• Package Contents: 1 x RC Car Tire Glue, 1 x Pointed Nozzle
• Age Range: 14+y

What It Is / How It Works

This RC car tire glue is a clear liquid adhesive sold as one 20 g (0.7 oz) pack with a pointed nozzle. It is a composite-material instant glue made for RC car builds and model repairs.

Who It's For / Use Cases

Tire glue for RC cars suits hobbyists who build or maintain RC cars, including off-road buggies, and want a fast-setting adhesive with a fine nozzle for tight spots. It suits anyone who bonds rubber tires or wheel parts on model vehicles and prefers a small pack for occasional repairs.

How to Use / Care

1. Use the pointed nozzle to place the glue precisely on the spot being bonded.
2. Apply only enough glue to cover the contact area, because the glue is super sticky.

How to Choose

Choose by pack size: this pack is 20 g (0.7 oz) with one pointed nozzle, which suits occasional tire and model repairs. Match the glue to the rubber and wheel materials you are bonding, and pick a clear, fast-curing adhesive when you want a low-profile joint on a model vehicle.

Frequently Asked Questions

What is this glue for?
It is a super sticky, quick-drying glue for RC car tires.

Is it waterproof?
It is waterproof and cures fast. The pack contains 20 g (0.7 oz) of glue.

What comes in the pack?
The pack has one RC car tire glue and one pointed nozzle.

Does it need a battery?
It has no battery and needs no power source.

Which vehicles is it for?
It is for RC cars and RC models. The product measures 98mm long and 29mm wide.

Key Features

• Window Mesh Upgrade — It is an RC car window mesh upgrade part, sold as a spare part for the car body.

Product Specifications

• Scale: 1/12
• Piece Count: 1 pcs
• Vehicle Type: Cars
• Age Range: 14+y

What It Is / How It Works

This RC car window mesh upgrade is a spare part for the window area of an RC car. It comes as one piece per pack and is made for cars.

Who It's For / Use Cases

RC car window mesh upgrade parts suit hobbyists who maintain or customize their scale RC cars and want to refresh the window area of a body. They are a practical choice for owners who prefer to replace a worn part rather than the full body shell, and for builders who enjoy detailing a model car with simple spare parts.

How to Use / Care

1. Use it to upgrade or replace the window mesh on a compatible RC car.

How to Choose

Start by checking that the mesh suits the window opening on your RC car body before you order. Look at the piece count so you know how many pieces you are getting. If the store offers more than one color, pick the one that matches your build. Compare the listed model and vehicle type with the car you own.

Frequently Asked Questions

Are batteries included?
No, batteries are not included with this item.

How many pieces are in one pack?
It is one piece per pack.

Which brand makes it?
The brand is GANGMAO.

Which model is it listed under?
It is listed under model MN99S and vehicle type Cars.

Key Features

• Full Remote Control — It moves forward, reverses, turns left and right, and starts the atomization process from the remote.
• Two Scale Options — It is available in 1:16 and 1:18 scale sizes.
• Plastic and Metal Build — The body combines plastic and metal parts for a sturdy structure.
• USB Charging — It charges through a USB cable, so you can power it from a computer or adapter.

Product Specifications

• Scale: 1:16
• Ratio: 1:18
• Type: Car
• Control Channels: 4 channels
• Controller Mode: MODE1,MODE2
• Flight Time: 20 mins
• State of Assembly: Ready-to-Go
• Product Description: MINI Truck/Liuzhou Truck
• Charger: USB Cable Charging
• Remote Control Range: Approximately 20M
• Usage Time: Approximately 30 minutes
• Remote Control Battery: 2 AA batteries (not included), AA*2 (not included in the package).
• Catalogue number: KF21
• Drive: 2WD
• Battery: 3.7 V 500 mAh
• Remote control distance: ≥30M
• Checking time: about 20 minutes.
• Packaging: Original Box
• Dimensions: 22 × 11 × 12 cm (8.7 × 4.3 × 4.7 in)
• Product size: 22*11*12 cm (8.7 × 4.3 × 4.7 in)/8.66*4.33*4.72 inches
• Product Dimensions: 18 × 8.6 × 9.5 cm (7.1 × 3.4 × 3.74 in)
• Frequency: 40 MHz; 2.4 GHz
• Charging Time: Approximately 60 minutes

What It Is / How It Works

This is a remote control car with spray lights and LED haul cargo. It comes in 1:16 and 1:18 scale sizes.

Who It's For / Use Cases

RC cars suit hobbyists who enjoy driving and controlling a vehicle indoors or on smooth outdoor surfaces. The spray lights and cargo design add visual interest for collectors and casual users.

How to Use / Care

1. Use the remote to drive it forward, reverse, left, and right.
2. Start the atomization process and control the light source from the remote.

How to Choose

Check the color options to match your preference.

Frequently Asked Questions

How does it charge?
It charges through a USB cable.

Are batteries included for the remote?
The remote uses 2 AA batteries, which are not included.

What scales are available?
It is available in 1:16 and 1:18 scale sizes.

What is the remote control range?
The remote control range is approximately 20 meters (65.6 ft), with a distance of at least 30 meters (98.4 ft).

How long does it run on a charge?
It runs for approximately 30 minutes on a full charge.

Key Features

• Lubrication and Noise Reduction — It lubricates metal parts, reduces wear and helps prevent abnormal noise and vibration.
• Low Friction Under Pressure — It keeps a low friction coefficient between metal surfaces under high pressure.
• High-Speed Gear Adhesion — It has strong adhesion on high-speed gears.
• CVD Joint Protection — It is used to help prolong the life of CVD joint drive shafts.

Product Specifications

• Material: Composite material
• Net content: 25 g (0.88 oz)
• Piece count: 1 pcs
• Age range: 14+y
• Vehicle type: Cars

What It Is / How It Works

This RC carbon grease is a gearbox and differential lubricant for radio-controlled car, buggy, truck, drift and crawler drivetrains.

Who It's For / Use Cases

Greases of this type suit hobbyists who maintain RC cars, buggies, trucks, drift cars and crawlers and want a lubricant for gearbox gears, steering joints and drive shaft joints during regular servicing.

How to Use / Care

1. Apply it to CVD joints.
2. Apply it to steering ball joints.
3. Apply it to gearbox gears.

How to Choose

When choosing a grease for an RC car, match it to the parts you service. Pick a grease intended for the joints and gears your model uses, and choose a pack size that suits how often you maintain the drivetrain.

Frequently Asked Questions

Which parts is it for?
It is for CVD joints, steering ball joints and gearbox gears.

Does it help with noise?
It helps prevent abnormal noise and reduces vibration between metal parts.

Is it certified?
It carries CE certification.

Does it need a battery?
It is a grease, so it has no battery.

How much does one pack hold?
The pack has one piece with a net content of 25 g (0.88 oz).

Key Features

• Motor Heat Dissipation — It is built to dissipate heat from the motor.
• 5–8V Input Range — It takes a 5–8V input.
• 25–50mm Size Range — It is offered in sizes from 25mm to 50mm.
• Rated Max Speed — Its maximum speed is 28000 RPM.

Product Specifications

• Max RPM: 28000
• Input Voltage: 5-8V
• Input Current: 0.6A
• Power: No battery
• Packaging: One cooling fan
• Piece Count: 1 pcs
• Scale: 1; 1/10, 1/8, 1/5
• Compatible models: RC Crawler 1/10 1/8 1/5 Motor Brushless/Brushed ESC RC

What It Is / How It Works

This is a cooling fan for RC car and RC crawler motors. Cooling fans of this type sit on the motor and move air across its housing to carry heat away. It is sold in sizes from 25mm to 50mm and has an aluminum alloy shell.

Who It's For / Use Cases

Cooling fans for RC crawlers and RC cars suit hobbyists who run brushed or brushless motors and want airflow over the motor during runs. They fit builders who upgrade or repair the cooling on a crawler or car drivetrain and want a small fan that adds no battery of its own.

How to Use / Care

1. Use it to cool the motor of an RC car or RC crawler.

How to Choose

Choose the fan size that matches the space around your motor, since the range runs from 25mm to 50mm.

Match the 5–8V input range to your power setup before buying.

Frequently Asked Questions

What sizes does the fan come in?
It is offered from 25mm to 50mm. Listed sizes include 30 × 30 × 10 mm and 40 × 40 × 11 mm.

What input voltage does it need?
It is rated for a 5–8V input.

Does it need a battery?
It has no battery. Batteries are not included in the package.

What is the shell made of?
The shell is made of aluminum alloy.

What comes in the package?
The package contains one cooling fan, one piece in total.

Which certifications are listed?
The listed marks are CE, RoHS, FCC and UL.

Key Features

• Plastic Parts — The toolbox, recovery board, fuel tank, shovel and fire extinguisher are made of plastic, and the wood box has a simulated solid wood look.
• Elastic Luggage Net — The luggage net is elastic and has hooks, so it hangs on the luggage rack to cover the decorative accessories.
• Realistic Scale Detail — The tools add realistic detail that makes the RC car look more authentic.
• Crawler Compatibility — It fits the 1/24 Axial SCX24 and 1/18 TRX4M, and suits FMS and RGT RC crawlers.

Product Specifications

• Color: Black orange
• Material: Plastic for the toolbox, recovery board, fuel tank, shovel and fire extinguisher; simulated solid wood box; bungee luggage net
• Piece Count: 12PCS
• Size: 1/18 1/24
• Compatible With: 1/24 Axial SCX24 1/18 TRX4M FMS RGT RC crawler
• Age Range: 14+y

What It Is / How It Works

This RC crawler accessory set has 12 pieces for dressing up scale crawlers with roof and trail details. It has 1 luggage net, 1 fire extinguisher, 1 wood box, 2 fuel tanks, 2 recovery boards, 4 toolboxes and 1 shovel.

Who It's For / Use Cases

Scale crawler owners who want their model to look more like a working trail truck will find roof and trail accessories a practical way to finish the build. Friends who love car models and enjoy detailing their builds may also find the set a fitting gift.

How to Use / Care

1. Hang the luggage net directly on the luggage rack to cover the decorative accessories.
2. Use the set to add roof, trail and recovery details to an RC crawler.

How to Choose

Start with the scale: the Size row lists 1/18 and 1/24, so match it to your crawler. Check the Compatible With row in Product Specifications for the listed crawler models before you buy.

Frequently Asked Questions

Which crawlers is it made for?
It is made for the 1/24 Axial SCX24 and 1/18 TRX4M, and for FMS and RGT RC crawlers.

Does it need batteries?
No. It has no battery and is not electric.

What is in the set?
It has 12 pieces: 1 luggage net, 1 fire extinguisher, 1 wood box, 2 fuel tanks, 2 recovery boards, 4 toolboxes and 1 shovel.

What is it made of?
The toolbox, recovery board, fuel tank, shovel and fire extinguisher are plastic. The wood box has a simulated solid wood look, and the luggage net is bungee.

Is it a good gift for a car model fan?
It is a gift idea for friends who love car models. The 12 pieces give a crawler a full set of roof and trail details.

Key Features

• Rainstorm Simulation Piece — It is a simulation piece that sets a rainstorm mood for a model car display.
• Crawler Roof Decoration — It is made to decorate the roof of an RC crawler car at 1/10, 1/16 or 1/18 scale.

Product Specifications

• Material: Nylon and composite material
• Scale: 1
• Quantity: 1 piece
• Compatible models: 1/10 1/16 1/18 SCX10 TRX4 TRX4M WPL

What It Is / How It Works

This simulation roof travel bag for RC crawler cars is a scale luggage bag. Roof bags of this type are decorative accessories that sit on a model car's roof to suggest a packed trip, so the bag works as display detail rather than as storage for real luggage.

Who It's For / Use Cases

Roof bags like this suit RC crawler hobbyists who build or display scale models and want a loaded-roof look. Scale modelers who like to add travel details to a crawler's roof, or who enjoy themed scenes such as a rainy road trip, will find this type of decoration useful.

How to Use / Care

1. Use it to dress up the roof of a scale RC crawler car as a travel luggage decoration.

How to Choose

Start with the scale. Check the Scale line in the specifications and match it to your crawler before you buy, since a roof decoration suits only the cars in that size range.

Frequently Asked Questions

What is it made of?
It is made of nylon and composite material.

How many come in one pack?
One piece per pack.

Who makes it?
The brand is HooCrawler.

What mood does it add to a display?
It is a simulation piece that sets a rainstorm mood for a model car display.

Key Features

• Replaceable Drift Tires — The car has replaceable racing and drifting tires, so you can switch between high-speed races and drift races.
• LED Night Lighting — An LED light is built in for night time racing.
• 2.4GHz Radio Control — The 2.4GHz proportional radio system gives a stable control signal within about 40 meters (131.2 ft). Several people can drive their cars at the same time without interference.
• Strong Magnetic Motor — It has a 130 strong magnetic motor.

Product Specifications

• Scale: 1:24
• Material: Metal, plastic
• Motor: 130 strong magnetic motor
• Power: Lithium battery
• Battery: 3.7V 500mAh
• Charging Voltage: 3.7V
• Charging time: 60 minutes
• Use time: about 20 minutes
• Remote distance: 40 m (131.2 ft)
• Controller mode: MODE1, MODE2
• State of assembly: Ready-to-Go
• Flight Time: 25min

What It Is / How It Works

This 4WD RC drift car is a remote control car that arrives ready to go. It is built for drift and high-speed racing, at a 1:24 scale, and it is made of metal and plastic.

Who It's For / Use Cases

Remote control drift cars suit hobbyists who enjoy sliding through corners and fast laps. Drivers who like racing against friends can run several cars in the same session, and the car suits anyone who wants a fast radio-controlled car to drive on their own.

How to Use / Care

1. Use it to drift and race with the remote control.
2. Charge the battery for about 60 minutes before driving it.
3. Plan each session around the use time of about 20 minutes per charge.

How to Choose

When you choose a remote control drift car, compare the remote range and run time with how you plan to drive. This model's remote distance is 40 m (131.2 ft) and its use time is about 20 minutes per charge, so plan longer sessions around charging.

Frequently Asked Questions

What is the remote range?
It has a remote distance of 40 m (131.2 ft) and uses a 2.4GHz radio control system.

Are batteries included?
The battery is rated 3.7V 500mAh.

How long does it run on one charge?
It runs for about 20 minutes per charge, and charging takes about 60 minutes.

Can several people race at the same time?
The 2.4GHz system lets several people drive their cars at once without interference, within about 40 meters (131.2 ft) of the remote.

Does it have lights?
It has an LED light for night time racing.

Key Features

• Remote Control Operation — It is operated with a handheld remote control.
• Directional Movement — It can turn frontward and backward under remote control.
• Arm and Sound — The arm rises and lowers, the model turns left and right, and it produces a simulation sound as it moves.

Product Specifications

• Scale: 1:24
• Dimensions: about 21x20x9cm (8.3 × 7.9 × 3.54 in)
• Material: Alloy and plastic
• Color: Yellow and grey
• Control channels: 6CH or 5CH
• Controller mode: MODE2
• Transmitter frequency: 2.4GHz
• Remote distance: about 50-100m (164–328.1 ft)
• Running time: about 20-30 minutes
• Charging voltage: 3.7V
• Transmitter battery: 2 x 1.5V AA batteries
• State of assembly: Ready-to-Go

What It Is / How It Works

This RC excavator is a remote-controlled scale model of an excavator, sold ready to go. It is 1:24 scale, measures about 21x20x9cm (8.3 × 7.9 × 3.54 in), and is built from alloy and plastic. RC excavators are remote-controlled scale models of construction machinery that reproduce the boom, arm and bucket movements of the full-size machine.

Who It's For / Use Cases

RC excavators suit hobbyists who enjoy operating remote-controlled construction models by hand. They also appeal to people who like scale models of construction machinery and want to watch an arm, boom and turning body move in a smaller size.

How to Use / Care

1. Load the transmitter with 2 x 1.5V AA batteries, which are not included.
2. Do not use other chargers to charge the battery of this product.
3. Operate the excavator within about 50-100m (164–328.1 ft) of the transmitter.

How to Choose

Choose by the control setup and the packaging. The store lists 6CH and 5CH versions, with or without a box, so pick the one that matches the number of channels you want and whether you want the box. Check the size as well: this model is 1:24 scale and about 21x20x9cm (8.3 × 7.9 × 3.54 in), so confirm you have enough space to run it.

Frequently Asked Questions

What scale is this excavator?
It is 1:24 scale and measures about 21x20x9cm (8.3 × 7.9 × 3.54 in).

Are batteries included?
No. The transmitter takes 2 x 1.5V AA batteries, which are not included.

How far does the remote reach, and how long does it run?
The remote distance is about 50-100m (164–328.1 ft), and the running time is about 20-30 minutes.

What movements does it make?
It turns frontward and backward, turns left and right, and its arm rises and lowers. It produces a simulation sound as it moves.

What is the transmitter frequency and controller mode?
The transmitter frequency is 2.4GHz and the controller mode is MODE2.

Key Features

• Multiple Fan Sizes — It comes in 25mm, 30mm, 35mm and 40mm sizes for RC use.
• Stable Working Temperature — It is designed to help the model keep a stable working temperature.
• 8000 RPM Speed — It is rated at 8000 RPM.
• 5V–7V DC Power — It runs on 5V to 7V DC power.
• Plastic Build — It is made of plastic, specifically ABS.

Product Specifications

• Material: Plastic
• Plastic Type: ABS
• Fan Sizes: 25mm, 30mm, 35mm, 40mm
• Speed: 8000RPM
• Power: 5V-7V DC
• Plug: 3P Futaba plug
• Dimensions: 36/42 mm (1.42–1.65 in)

What It Is / How It Works

This RC cooling fan is a fan for radio-controlled model builds, sold under the GWOLVES brand.

Who It's For / Use Cases

RC fan replacements suit radio-controlled model builders who want to add airflow to a motor or speed controller. They are a practical choice for hobbyists who need to swap a worn or undersized fan and want a size that matches the part being replaced.

How to Use / Care

1. Make sure your fan size is properly replaced before use.
2. Check that the fan you fit matches the size you are replacing before running the model.

How to Choose

Start with the size of the part you are replacing, then pick from the listed fan sizes of 25mm, 30mm, 35mm and 40mm. Compare the Dimensions row in Product Specifications with the measurements of your existing part so the fan you choose matches the mounting area.

Frequently Asked Questions

What material is it made of?
It is made of plastic, specifically ABS.

What sizes does it come in?
It comes in 25mm, 30mm, 35mm and 40mm sizes for RC use.

What voltage does it run on?
It runs on 5V to 7V DC power, and batteries are not included.

What speed is it rated for?
It is rated at 8000 RPM and is designed to help the model keep a stable working temperature.

Does it have a Futaba plug?
It has a 3P Futaba plug and carries the CE mark.

Key Features

• ABS Plastic Build — The fan is made of plastic, and the plastic type is ABS.
• 8000RPM Speed — It runs at 8000RPM.
• 5V-7V DC Power — It runs on 5V-7V DC power.
• 3P Futaba Plug — The fan connects through a 3P Futaba plug.

Product Specifications

• Material: Plastic
• Plastic Type: ABS
• Size: 25mm / 30mm / 35mm / 40mm
• Dimensions: 36/42 mm (1.42–1.65 in)
• Speed: 8000RPM
• Voltage: 5V-7V DC
• Plug: 3P Futaba plug

What It Is / How It Works

This RC fan from GWOLVES comes in 25mm, 30mm, 35mm and 40mm sizes and runs at 8000RPM on 5V-7V DC. RC cooling fans of this kind are small DC fans mounted on electronic speed controllers and motors to move air over a heat sink in radio-controlled vehicles.

Who It's For / Use Cases

RC hobbyists who run electronic speed controllers or motors that heat up during use may look for a cooling fan like this. Builders replacing a worn or undersized ESC fan will want to match the fan size to the heat sink they are cooling. Owners of radio-controlled cars and boats who work on their own electronics often find a separate fan easier to swap than a full ESC.

How to Use / Care

1. Make sure the fan size is properly replaced before use.
2. Check that your power supply stays within the 5V-7V DC rating before you connect the fan.
3. Match the 3P Futaba plug to your connection before plugging the fan in.

How to Choose

Start with fan size. Compare the 25mm, 30mm, 35mm and 40mm options with the space around your ESC or motor, since a fan that fits the heat sink area you are cooling is the simplest choice. Next, confirm your system runs on 5V-7V DC, the rating listed in Specifications. Finally, check that the 3P Futaba plug matches the connection on your setup before you buy.

Frequently Asked Questions

What sizes does the fan come in?
It is listed in 25mm, 30mm, 35mm and 40mm sizes, with size listings of 25 * 25 * 10mm, 30 * 30 * 10mm, 35 * 35 * 10mm and 40 * 40 * 10mm.

What voltage does it use?
The rating is 5V-7V DC, and the speed is 8000RPM.

What plug does it have?
It has a 3P Futaba plug, so check that it matches your connection before buying.

Does it need a battery?
No. It has no battery, and batteries are not included.

Does it carry a certification mark?
It carries the CE mark, and the brand is GWOLVES.

Key Features

• Future Channel Upgrade — A 3-channel block can be upgraded to 4 to 8 channels by adding 1-channel upgrade valve blocks and replacing four fixed bolts.
• Anodized Aluminum Body — The aluminum alloy body is anodized and finished with CNC super-finishing.
• Compact Build — It has a small size that suits compact RC models.

Product Specifications

• Material: Aluminum alloy
• Channels: 1/2/3/4/5/6/7/8
• Nozzle size: 4mm
• Connectors: M5-4mm hose connectors
• Use pressure: Within 8Mpa
• Product medium: 46# hydraulic oil
• Surface treatment: Anodized
• Processing technology: CNC super-finishing
• Piece Count: 1 pcs
• Intended Use: Vehicles & Remote Control Toys

What It Is / How It Works

This RC high pressure hydraulic rotary valve block is a valve block with a 4mm nozzle and 1 to 8 channels, made for excavator and engineering vehicle models. It is an aluminum alloy valve block that comes as one piece.

Who It's For / Use Cases

Hydraulic valve blocks like this suit hobbyists who build or upgrade radio-controlled excavator and engineering vehicle models. They suit builders who want a compact hydraulic control unit that can grow as more functions are added.

How to Use / Care

1. Keep the use pressure within 8Mpa.
2. If the system has no central oil return function, use the valve block with the overflow valve from the store.
3. When the cylinder reaches its longest or shortest stroke, the overflow valve opens the pressure relief valve to drain oil into the tank.

How to Choose

Start with the channel count, because each hydraulic function on a model needs its own channel. Check the nozzle size and hose connector type in Product Specifications against the hoses on your model. If you plan to add functions later, the upgrade path lets the block grow from a smaller channel count.

Frequently Asked Questions

Does it need a battery?
No. The valve block is hydraulic and has no battery, and the Power row lists No battery.

How many channels does it have?
The block is listed with 1 to 8 channels. A 3-channel block can be upgraded to 4 to 8 channels by adding 1-channel upgrade valve blocks and replacing four fixed bolts.

What pressure can it handle?
The use pressure is within 8Mpa.

What oil does it use?
It is rated for 46# hydraulic oil.

What is in the package?
The package has one valve block.

Key Features

• Front and Rear Lights — It is made for the front and rear lights on model car shells.
• Multi-Scale Fit — It is suited to 1/18, 1/16, 1/12, 1/10, 1/8 and 1/5 scale cars.
• Three-Channel Plug — The plug connects to the receiver on three channels.
• Always-On Lighting — The light stays on and lights up when plugged into the receiver.
• Remote Light Linkage — Linking it to remote control needs a control line and a remote with a third-channel function button.

Product Specifications

• Piece Count: 1 pcs
• Power: 5-11V
• Material: Composite Material
• Intended Use: Vehicles & Remote Control Toys
• Scale: 1/10, 1/8, 1/12

What It Is / How It Works

This LED light kit adds headlamps and taillights to remote-control model cars. The product details list sizes of 3mm (0.12 in), 5mm (0.2 in), 8mm (0.31 in) and 10mm (0.39 in) for the light lamps.

Who It's For / Use Cases

RC hobbyists who build, refit or upgrade model cars, trucks, crawlers and drift cars often want lit headlights and taillights for their builds. Light kits of this type suit anyone who wants a finished look on a remote-control vehicle, whether the build is for display, racing or weekend driving.

How to Use / Care

1. Use it to light up the headlamps and taillights of a remote-control car, truck, crawler or drift car.

How to Choose

Match the scale to your model. The product details list 1/18, 1/16, 1/12, 1/10, 1/8 and 1/5 scale cars as suitable.

If you want the lights linked to your remote, choose a setup with a third-channel function button on the remote, since that is what the light linkage needs.

Frequently Asked Questions

Which cars does it suit?
It is made for the front and rear lights on model car shells. The product details name Traxxas, HSP, HPI, Redcat, RC4WD, Tamiya and Axial cars.

Does it need a battery?
It has no battery of its own. Its power rating is 5-11V.

Is it certified?
It carries the CE mark.

How does the light turn on?
The light stays on and lights up when it is plugged into the receiver.

What remote does linkage need?
Linkage needs one control line and a remote with a third-channel function button.

Key Features

• Two Light Sizes — The lights come in 3mm and 5mm sizes, so you can choose the size that fits your model.
• Four White, Four Red — One set has four white and four red 5mm lights, which gives an even color split across the model.
• Mixed Color Set — One set combines white and red 5mm lights with blue 3mm lights for a wider range of colors and sizes.

Product Specifications

• Color: Red and white
• Dimensions: 3/5 mm (0.12–0.2 in)
• Material: Rubber
• Piece Count: 1 pcs
• Intended Use: Vehicles & Remote Control Toys
• Age Range: 12+y,14+y

What It Is / How It Works

These are small LED lights for RC vehicles and remote control toys, in 3mm and 5mm sizes and red, white and blue colors. They are sold for front and tail light use on remote control models.

Who It's For / Use Cases

Hobbyists who run RC cars and other remote control models may use LED light sets like these to add front and tail lighting. Builders who like to match light colors across a model, or who want a mix of 3mm and 5mm sizes, will find that range useful for detailing their build.

How to Use / Care

1. Use the lights on an RC vehicle or remote control toy as front and tail lighting.

How to Choose

Start with the light size. The sets use 3mm and 5mm LEDs, so pick the size that suits the spot on your model where each light will sit. Next, look at the color mix. One set offers four white and four red 5mm lights, while another mixes white and red 5mm lights with blue 3mm lights. Choose the set whose colors and sizes match your build.

Frequently Asked Questions

What sizes do the lights come in?
The lights come in 3mm and 5mm sizes. Some sets pair white and red 5mm lights with blue 3mm lights, and others use only 5mm white and red lights.

What material are they made of?
They are made of rubber.

What are they made for?
They are made for RC vehicles and remote control toys. The age range is 12+y,14+y.

How many pieces do you get per order?
Each order is 1 piece.

Key Features

• Dual Motor Traction — It has dual motors for greater load capacity and a traction force of about 8–15 kg (17.6–33.1 lb).
• Mud Recovery Use — It can drag a car stuck in mud, simulating the performance of a real car.
• Aluminum Alloy Body — It is made of aluminum alloy and metal materials.
• Durable Build — It is durable for long-lasting use.
• CH3 Connecting Line — One CH3 connecting line is included.

Product Specifications

• Scale: 1/10
• Piece Count: 1 pcs
• Material: Aluminum alloy and metal materials
• Power: No battery
• Traction Force: 8–15 kg (17.6–33.1 lb)
• Wide Voltage: 5-11V
• Package Size: 15 × 10 × 6 cm (5.9 × 3.9 × 2.36 in)
• Part number: RGT86100V2

What It Is / How It Works

This is a dual motor metal winch for 1/10 RC crawler cars. It has no battery and is sold as a winch unit for scale crawler builds.

Who It's For / Use Cases

RC crawler hobbyists who want a winch for scale crawler builds will find this type of winch useful. Owners who like to pull a stalled crawler over rocks, mud or soft ground often add a metal winch to their setup. Winches of this kind suit builders who want a working pulling feature on a crawler, not just a display part.

How to Use / Care

1. Connect the winch to the CH3 connecting line and the manual controller before use.
2. Use the manual controller to run the winch when pulling a stuck crawler.

How to Choose

Pick a winch by the pulling load you need, since traction is the main figure for this type. Compare the voltage range with the power you plan to use, and check that the connecting line and controller match your setup. Weight and package size matter if you carry the winch in a crawler case.

Frequently Asked Questions

Does the winch need batteries?
It has no battery, and batteries are not included.

How much can it pull?
It has a traction force of 8–15 kg (17.6–33.1 lb), provided by dual motors.

What voltage does it use?
It has a wide voltage range of 5-11V.

What comes in the pack?
The pack has one piece, one CH3 connecting line and some other fittings.

How much does it weigh?
The winch weighs 119.1 g (4.2 oz), and the package weighs 122 g (4.3 oz).

Key Features

• Aluminum Alloy Body — The arm is made of aluminum alloy for use on RC car and boat shafts.
• Three Shaft Sizes — Bore options fit 3mm (0.12 in), 4mm (0.16 in) and 5mm (0.2 in) shafts, with bores of 3.1mm (0.12 in), 4.1mm (0.16 in) and 5.1mm (0.2 in).
• Side Screw Mount — Side fixing holes take M2 screws to secure the arm.
• Rudder Transmission Role — It can sit on the rudder output shaft or a DC motor shaft to transmit motion.
• Three-Piece Pack — The pack holds three pieces.

Product Specifications

• Material: Aluminum Alloy
• Bore Size: 3.1mm (0.12 in) (Fit for 3mm (0.12 in) shaft), 4.1mm (0.16 in) (Fit for 4mm (0.16 in) shaft), 5.1mm (0.2 in) (Fit for 5mm (0.2 in) shaft)
• Mount: Screw (M2)
• Piece Count: 3
• Age Range: 3-6Y,6-12Y,14+y

What It Is / How It Works

This RC double steering arm, made of aluminum alloy, is a transmission part for model cars and boats.

Who It's For / Use Cases

Steering arms like this suit RC hobbyists who build, rebuild or repair model cars and boats, especially where a rudder or motor shaft needs a transmission link.

How to Use / Care

1. Pick the bore that matches your shaft: 3.1mm (0.12 in) for a 3mm (0.12 in) shaft, 4.1mm (0.16 in) for a 4mm (0.16 in) shaft or 5.1mm (0.2 in) for a 5mm (0.2 in) shaft.
2. Slide the arm onto the output shaft of the rudder or the shaft of the DC motor.
3. Secure it through the side fixing holes with the screws.

How to Choose

Start with the shaft diameter on your rudder or DC motor, since the bore must match it. Compare materials as well: this arm is aluminum alloy, so it suits builds that call for a metal transmission link. Choose the bore size first, then confirm the pack count you need.

Frequently Asked Questions

Which shaft sizes does it fit?
The bores are 3.1mm (0.12 in) for a 3mm (0.12 in) shaft, 4.1mm (0.16 in) for a 4mm (0.16 in) shaft and 5.1mm (0.2 in) for a 5mm (0.2 in) shaft.

What is it made of?
It is made of aluminum alloy.

Does it need batteries?
It has no battery and runs without power.

How is it secured?
It is secured with M2 screws through the side fixing holes.

How many pieces come in a pack?
The pack holds three pieces.

Key Features

• Gear Pulling Use — It is made to pull gear, such as the pinion gear on an RC motor.
• Aluminium Alloy Build — The puller is made of aluminium alloy.
• Multiple Sizes — The set lists Φ1.5mm, 2.0mm, 2.5mm and 3.0mm sizes, so you can match the one your motor shaft needs.

Product Specifications

• Material: Aluminium Alloy
• Package Weight: 65 g (2.3 oz)
• Piece Count: 1 pcs
• Package Size: 6 × 6 × 2 cm (2.36 × 2.36 × 0.79 in)
• Size options: Φ1.5mm
• Intended Use: To pull gear
• Power: No battery
• Age Range: 14+y

What It Is / How It Works

This RC motor pinion gear puller is a hand tool for pulling the pinion gear off an RC motor shaft. Gear pullers grip a part and draw it straight off a shaft, so the gear comes off in one controlled pull instead of being forced by hand.

Who It's For / Use Cases

Pullers of this kind suit RC hobbyists who service or upgrade motors and need to remove a pinion gear from the shaft. They suit anyone who changes gears on a regular basis, since the job is simpler with a tool made for it.

How to Use / Care

1. Install the gear lever into the rotation bracket and the fitted swim boards.

How to Choose

Start with the shaft diameter of the motor and choose the size from the set's list that matches it. Check that the size list covers the shaft you plan to work on, then pick the matching thimble before you pull the gear.

Frequently Asked Questions

What is this tool used for?
It is made to pull gear, such as an RC motor pinion gear off the motor shaft.

What is it made of?
It is made of aluminium alloy.

Does it need a battery?
It has no battery or power supply.

What comes in the package?
The package has one piece, a gear puller tool set.

Which sizes does it cover?
The set lists Φ1.5mm, 2.0mm, 2.5mm and 3.0mm sizes.