Keep your Audi's cup holders clean, quiet, and free from annoying rattles with these two-piece leather coasters. Designed to fit a wide range of Audi S Line models, they add a touch of style while protecting your interior from spills and scratches.

These coasters are made from durable leather and feature a clever anti-noise design. They absorb the vibration and noise from your water cup or travel mug, creating a more peaceful driving experience. The set includes two coasters, perfect for both front cup holders.

The leather material is both washable and reusable, making it easy to keep your car's interior looking fresh. Simply remove them, give them a quick clean, and they are ready to use again. Their high-temperature resistance means they can handle hot drinks without warping or damage.

Installation is effortless. Just place the coaster into your cup holder. The precision-cut size ensures a snug fit that stays in place, even during sharp turns or bumpy roads. They are a simple upgrade that makes a noticeable difference in your daily drive.

Key Features and Benefits

- Leather material that is washable and reusable for easy maintenance

• Anti-noise design that reduces vibration and rattling from cups and bottles

• High temperature resistance for safe use with hot beverages

• Precision-cut size of 7 cm diameter for a snug, secure fit in standard cup holders

• Set of two coasters to protect both front cup holders

Who Is This For

- Audi S Line owners who want to keep their cup holders clean and scratch-free

• Drivers who are bothered by the noise of cups rattling in the cup holder

• Anyone looking for a simple, reusable accessory to protect their car interior

• Audi enthusiasts who appreciate a clean, factory-matched look

Usage Scenario

Mark was tired of hearing his travel mug clatter against the plastic of his Audi A4's cup holder every time he hit a bump. The noise was distracting on his long commute. After placing these leather coasters in both front holders, the rattling stopped completely. Now, his morning coffee sits quietly, and the cup holder stays clean from drips. It is a small change that made his daily drive much more relaxing.

Micro Comparison

Unlike basic rubber coasters that can slide around or leave sticky residue, these leather pads are designed to stay put. They offer a more premium look that matches the Audi interior, while being easier to clean than fabric alternatives. The anti-noise feature is a specific benefit that generic coasters do not provide.

Specifications

Material: Leather

Size: 7 cm x 7 cm / 2.8 in x 2.8 in

Color: Carbon Black

Package includes

2 pcs/set

Please allow 1-2 cm / 0.4-0.8 in difference due to manual measurement.

Why You Will Love It

You will appreciate how these simple coasters bring peace and quiet to your drive. They protect your car's resale value by keeping cup holders in pristine condition. Plus, they are easy to clean and built to last, making them a smart, low-maintenance accessory for your Audi.

Questions and Answers

Question: Will these fit my Audi A3?

Answer: Yes, these coasters are designed to fit Audi A3 models, as well as many other Audi S Line vehicles.

Question: Are these coasters machine washable?

Answer: They are washable by hand. Simply wipe them clean or rinse with water and let them air dry.

Question: Do they prevent coffee spills?

Answer: They help contain minor spills and keep your cup holder clean, but they are not sealed containers and will not stop a full cup from spilling.

Question: What is the diameter of the coaster?

Answer: The coaster measures 7 cm / 2.8 inches in diameter.

Question: Can I use these with a Yeti or other large tumbler?

Answer: They work best with standard-sized cups and bottles. Very large tumblers may not fit securely on the coaster.

Keep your Mazda's seat belt buckles clean and protected with this set of two suede protector covers. Designed to fit a wide range of Mazda models including the CX-5, CX-30, MX-5, and Mazda 6, these covers help prevent scratches and wear on the buckle area.

Each cover is made from soft suede material in your choice of Red or Black stitching. The covers are easy to install and add a subtle custom look to your car's interior. They help reduce noise from the buckle hitting the seat or pillar trim while driving.

Choose between two styles to match your preference. The set comes packaged in a foam bag for safe storage when not in use. These accessories are a simple way to maintain the appearance of your Mazda's cabin.

Key Features and Benefits

- Suede material that protects the seat belt buckle from scratches and scuffs

• Available in Red or Black stitching to coordinate with your interior

• Two styles to choose from for a personalized look

• Helps reduce noise from the buckle hitting the seat or trim

• Easy to install without any tools or modifications

• Packaged in a foam bag for convenient storage

Who Is This For

- Mazda owners who want to keep their seat belt buckles free from scratches and wear

• Drivers looking for a simple interior accessory that adds a touch of style

• Anyone who wants to reduce cabin noise from the buckle hitting the seat or pillar

• Mazda enthusiasts with models like CX-5, CX-30, MX-5, Mazda 6, CX-50, CX-60, and others

Usage Scenario

David noticed the seat belt buckle on his Mazda CX-5 was starting to show small scratches from daily use. The metal buckle would occasionally hit the side of the seat when he released the belt. He ordered this set of suede covers and installed them in under a minute. The covers not only protected the buckle from further wear but also stopped the annoying tapping sound. The red stitching matched his interior trim perfectly.

Micro Comparison

Unlike generic universal covers that may not fit securely, these protectors are shaped specifically for Mazda seat belt buckles. The suede material feels softer than hard plastic alternatives and does not slip off during use. The two-style option gives you more control over the final look compared to single-style covers.

Specifications

Material: Suede

Color Options: Red stitching / Black stitching

Style Options: Style A / Style B

Packaging: Foam bag

Package Includes

- 2 x Seat Belt Buckle Protector Covers

Why You Will Love It

These covers add a simple layer of protection to a part of your car that gets used every day. The suede material looks and feels more premium than bare plastic. Installing them is quick and requires no tools, making it an easy upgrade for any Mazda owner.

Questions and Answers

Question: Will these covers fit a Mazda CX-30?

Answer: Yes, these covers are designed to fit a wide range of Mazda models including the CX-30.

Question: Are the covers easy to install?

Answer: Yes, they slide onto the seat belt buckle without any tools and take less than a minute to install.

Question: Do the covers come in different colors?

Answer: Yes, you can choose between Red stitching or Black stitching.

Question: What material are the covers made from?

Answer: They are made from suede material.

Question: Will these covers fit a Mazda MX-5?

Answer: Yes, the MX-5 is one of the compatible models listed for these covers.

This car seat belt extender is made for Peugeot models including the 206, 207, 208, 3008, 307, 308, 2008, 407, 508, 5008, 106, and 107. It adds extra buckle reach for a more comfortable and secure fit.

If your seat belt is too tight or the buckle is hard to reach, this simple plug accessory solves the problem. It is made from durable alloy and installs in seconds. Just insert it directly into the existing buckle, and you get a longer reach without any tools or modifications.

This extender is built to last. The alloy construction holds up to daily use and keeps the connection secure. It is a practical solution for drivers and passengers who need a little extra room while staying safely buckled up.

Whether you are tall, wearing bulky clothing, or just want a more relaxed driving position, this extender makes your seat belt more comfortable. It works with the original belt system and does not interfere with safety features.

Key Features and Benefits

- Alloy material that is hard and durable for long-term use

• Direct plug-in installation that requires no tools or modifications

• Extends the seat belt reach for a more comfortable and relaxed fit

• Compatible with a wide range of Peugeot models for versatile use

• Lightweight design at 60g that adds no bulk to your seat belt system

Who Is This For

- Peugeot drivers who find the stock seat belt too tight or short

• Taller passengers who need extra buckle reach for a comfortable position

• Anyone wearing thick winter coats or bulky gear while driving

• Owners of Peugeot models listed above looking for a simple belt fix

Usage Scenario

Mark drives a Peugeot 308 and always felt cramped with the seat belt pulling tight across his chest. After installing this extender, he could adjust the belt to a looser, more natural position. His daily commute became more comfortable, and he no longer had to lean forward just to reach the buckle.

Micro Comparison

Some extenders use plastic clips that can crack over time. This model uses an alloy build for better strength and durability. It also fits multiple Peugeot generations, so you do not need a different part for each vehicle.

Specifications

- Material: Alloy

• Net Weight: 60g

• Name: Car seat belt extender

Package Includes

- 1 x Car seat belt extender

Why You Will Love It

You get a quick fix for a tight seat belt without any complicated installation. The alloy build gives you confidence that it will hold up over time. It is a small change that makes every drive more relaxed.

Questions and Answers

Question: Will this fit my Peugeot 207?

Answer: Yes, this extender is compatible with the Peugeot 207 as listed in the supported models.

Question: Is this extender safe to use?

Answer: It is designed to plug directly into the existing buckle and does not interfere with the original safety system.

Question: How do I install it?

Answer: Just insert the extender directly into the seat belt buckle. No tools are needed.

Question: What is it made of?

Answer: The extender is made from alloy, which is hard and durable.

Question: Does it work with the Peugeot 3008?

Answer: Yes, the Peugeot 3008 is included in the list of compatible models.

Protect your Chevrolet's seat belt buckle from daily wear and scratches with these soft suede buckle covers. Designed to fit a wide range of Chevrolet models including Spark, Captiva, Cruze, Malibu, Equinox, Trax, and Camaro, this set of two covers adds a touch of style while keeping the buckle area clean and damage-free.

Each cover is made from suede material that feels smooth to the touch and resists scuffing. The easy slip-on design lets you install them in seconds without any tools. Choose between Black line or Red line styling to match your interior, and pick A style or B style for the look you prefer.

These buckle covers are a simple upgrade that keeps your car's interior looking fresh. They also help reduce noise from the buckle tapping against the seat or center console. Whether you drive a daily commuter or a weekend cruiser, this accessory adds a layer of protection that lasts.

Key Features and Benefits

- Suede material that feels soft and resists scratches on the buckle surface

• Two-piece set that covers both front seat belt buckles for uniform protection

• Slip-on design that installs quickly without adhesive or tools

• Available in Black line or Red line to coordinate with different interior trims

• Compatible with multiple Chevrolet models for a versatile fit

Who Is This For

- Chevrolet owners who want to protect their seat belt buckle from daily contact marks

• Drivers looking for a subtle interior upgrade that does not change the buckle function

• Anyone who prefers a soft-touch surface over hard plastic or metal on the buckle area

Usage Scenario

Mike noticed small scratches forming on his Chevrolet Cruze's seat belt buckle after a few months of daily driving. He picked up this suede cover set, slipped them on in under a minute, and immediately liked the cleaner look. Now the buckle area stays protected, and the subtle red line adds a custom touch without being flashy.

Micro Comparison

Compared to hard plastic covers that can crack or shift over time, these suede buckle covers stay in place and conform to the buckle shape. The two-piece set gives you matched protection for both front seats, unlike single covers that leave one side exposed. The suede surface also reduces the metallic clicking sound when the buckle taps against the seat.

Specifications

- Material: Suede

• Color: Black line / Red line

• Style: A style / B style

• Packing: Foam Bag

• Quantity: 2 pieces per set

Package Includes

- 2 x Car seat safety belt buckle covers

Why You Will Love It

You get a simple, affordable way to keep your Chevrolet's seat belt buckle looking like new. The suede material adds a premium feel to an often-overlooked part of your car's interior. With two color options and two style choices, you can match your personal taste without spending much.

Questions and Answers

Question: Will these buckle covers fit my Chevrolet Malibu?

Answer: Yes, these covers are designed for Chevrolet models including Malibu, Spark, Captiva, Cruze, Equinox, Trax, and Camaro.

Question: Do I need to remove the buckle to install the cover?

Answer: No, the cover slips onto the buckle easily without removing anything.

Question: What is the difference between A style and B style?

Answer: A style and B style refer to two different visual designs. Both fit the same way, so you can choose based on the look you prefer.

Question: Are these covers washable?

Answer: The suede material can be spot cleaned with a damp cloth. Avoid machine washing to maintain the shape and color.

Question: Do these covers interfere with the seat belt buckle operation?

Answer: No, the cover is designed to fit around the buckle without blocking the release button or latch mechanism.

Get precise handbrake control for your sim racing setup with the SimRuito RT31. This USB handbrake uses a 200kg load cell sensor for accurate input, making it a solid choice for drifting, rally, and truck simulation games.

The SimRuito RT31 is built for serious sim racers who need reliable and consistent performance. Its stainless steel construction provides a sturdy feel, while the plug-and-play USB connection gets you racing fast. The included Paddock v2.1.0 software lets you fine-tune the brake response to match your driving style.

This handbrake works with a wide range of sim racing titles on Windows and Linux. You can adjust the force curve, set dead zones, and choose between linear axis or button output modes. Regular software and firmware updates keep your gear performing at its best.

Whether you are learning to drift or competing in rally events, the RT31 delivers the feedback and control you need to improve your lap times. The 200kg load cell sensor captures every细微 movement, translating your inputs into precise in-game actions.

Key Features and Benefits

- 200kg load cell sensor that provides accurate and consistent brake input for realistic control

• Stainless steel construction that offers durability and a solid, premium feel during intense racing sessions

• USB plug-and-play connection that makes setup simple without needing extra drivers

• Paddock v2.1.0 software that lets you customize force curves, dead zones, and output modes

• Dual output modes (linear axis and button) that give you flexibility for different games and setups

• Wide game compatibility that works with major sim racing titles on Windows 7-11 and Linux

Who Is This For

- Sim racers who want a dedicated handbrake for drifting and rally driving

• Gamers playing Euro Truck Simulator 2 who need precise parking and maneuvering control

• Enthusiasts building a realistic sim racing cockpit who value load cell accuracy

• Competitive racers who need adjustable settings to fine-tune their brake feel

Usage Scenario

Mark was struggling to link corners in his favorite drift simulator. He was using a button on his wheel for the handbrake, but it never felt right. After installing the SimRuito RT31, he could feel the exact moment the rear wheels locked up. He adjusted the force curve in the software to make the brake engage earlier, and within a few laps, he was nailing tandems he could only dream of before.

Micro Comparison

Many entry-level handbrakes use a simple potentiometer that can wear out or give inconsistent readings. The RT31 uses a 200kg load cell sensor, which measures actual force and provides much more precise and repeatable input. Combined with the free, adjustable software, you get a level of control that is usually found on much more expensive gear.

Specifications

Material: Stainless steel

Sensor: Taiwan MAVIN 200 kg load cell

Connection: USB (driver-free)

Software: SimRuito Paddock v2.1.0

Compatibility: Windows 7/8/10/11, Linux

Package Includes

- 1 x SimRuito RT31 Handbrake

• 1 x USB Cable

• 1 x Mounting Hardware

Why You Will Love It

You will love the confidence that comes with precise, repeatable handbrake inputs. The solid stainless steel build feels great under hand, and the adjustable software means you can tailor the brake exactly how you like. It is a simple upgrade that makes a huge difference in your driving.

Questions and Answers

Question: Is this handbrake compatible with my Logitech G29 wheel?

Answer: Yes, it connects directly to your PC via USB and works as a separate device alongside any steering wheel.

Question: Does it require any software to work?

Answer: No, it works plug-and-play as a standard game controller. The Paddock software is optional for customizing the force curve and settings.

Question: Will this work with Forza Horizon 5?

Answer: Yes, the handbrake is recognized as a USB controller and can be mapped in Forza Horizon 5 and most other PC racing games.

Question: Is the handbrake difficult to mount to a racing rig?

Answer: It includes mounting hardware and can be easily attached to most aluminum profile or pre-drilled rigs.

Question: What is the difference between linear axis and button output mode?

Answer: Linear axis mode lets the game read the exact amount of brake pressure you apply. Button output mode acts like a simple on/off switch.

Upgrade your BMW's interior with a handbrake handle and gear shift knob set that combines Alcantara luxury with carbon fiber styling. Designed to fit multiple F-series models, this set gives your cabin a sporty, refined look without a full interior overhaul.

This handbrake handle is wrapped in soft, textured Alcantara for a comfortable grip and a premium feel. The carbon fiber gear shift knob adds a high-performance aesthetic that matches the modern BMW cockpit. Together, they create a cohesive upgrade that enhances your driving experience every time you get behind the wheel.

Installation is straightforward and designed to replace your factory parts directly. The set is built to withstand daily use, with materials that resist wear and maintain their appearance over time. Whether you're refreshing an older interior or completing a custom build, this combo delivers a noticeable visual and tactile upgrade.

Give your BMW a custom, track-inspired look with this handbrake handle and gear shift knob set. It's a simple change that makes a big difference in how your car feels and looks from the driver's seat.

Key Features and Benefits

- Alcantara wrapped handbrake handle that provides a soft, non-slip grip for confident control

• Carbon fiber gear shift knob that adds a lightweight, race-inspired look to your center console

• Direct fit design that replaces factory parts on compatible BMW F-series models for easy installation

• Durable materials that resist fading and wear to keep your interior looking fresh over time

• Complete set that upgrades two key touchpoints for a cohesive interior refresh

Who Is This For

- BMW owners looking to upgrade the interior of their F30, F31, F32, F33, F36, F80, F81, F82, F83, or F84 model

• Car enthusiasts who want a sportier, more premium feel without a full custom interior job

• Drivers who appreciate the look and feel of Alcantara and carbon fiber in their daily driver

• Anyone refreshing an older BMW interior to match modern styling trends

Usage Scenario

Mark had been driving his F30 3 Series for a few years and wanted to refresh the interior without spending a fortune. The factory handbrake handle felt worn, and the gear shift knob looked dated. He installed this Alcantara and carbon fiber set on a Saturday afternoon. The soft grip of the handbrake handle felt immediately better, and the carbon fiber knob tied the whole cabin together. Now, every time he shifts gears, he feels like he's driving a newer, more customized car.

Micro Comparison

Compared to basic plastic or leather replacement parts, this set uses Alcantara and carbon fiber for a more premium, sporty appearance. Many aftermarket options only replace one component, but this kit gives you both the handbrake handle and gear shift knob for a coordinated look. If you want a noticeable interior upgrade that doesn't require professional installation, this set is a practical choice.

Specifications

- Item Type: Handbrakes

• Model Name: 3 and 4 series

• Item Length: 96 cm

• Item Width: 20 cm

• Item Height: 11 cm

• Item Weight: 1.4

Package Includes

- 1 x Alcantara Handbrake Handle

• 1 x Carbon Fiber Gear Shift Knob

Why You Will Love It

You will love the way this set transforms your BMW's interior with just two simple parts. The Alcantara grip feels great in your hand, and the carbon fiber knob adds a touch of motorsport style. It's an affordable upgrade that makes your car feel more personal and more exciting to drive every day.

Questions and Answers

Question: Will this fit my BMW F30 320i?

Answer: Yes, this set is designed for F30, F31, F32, F33, F36, F80, F81, F82, F83, and F84 models.

Question: Is the gear shift knob a direct replacement?

Answer: Yes, it is designed to replace the factory gear shift knob on compatible models.

Question: What material is the handbrake handle made of?

Answer: The handbrake handle is wrapped in Alcantara.

Question: Does the set include installation instructions?

Answer: The package includes the handbrake handle and gear shift knob. Installation is straightforward for most DIY users.

Question: Is the carbon fiber real or a wrap?

Answer: The gear shift knob features a carbon fiber trim for a sporty, high-performance look.

Add a realistic handbrake to your PC racing setup. This USB handbrake works with Logitech and Thrustmaster wheels for truck and bus simulators. It gives you precise control for parking and drifting in games like Euro Truck Simulator 2 and American Truck Simulator.

This handbrake is built for simulation fans who want more immersion. The handle pulls back to lock and releases with a simple finger lift. It connects directly to your Windows PC with a USB cable, so you can start using it right away without extra drivers.

The sturdy build includes an aluminum alloy base and a stainless steel internal structure. The adjustable clamp fits desktops or brackets from 8mm to 55mm thick. This handbrake is designed to handle long gaming sessions and frequent use.

Setup is quick in most games. For ETS2 and ATS, just add the device in the game settings and map it to the parking brake. For OMSI2, you will need to use JoyToKey software to map the handbrake to a keyboard key. The handbrake works with Windows XP, 7, 8, 8.1, 10, and 11.

Key Features and Benefits

- USB plug-and-play connection that works without extra drivers for easy setup

• Adjustable clamp from 8mm to 55mm that fits on desktops or brackets for flexible placement

• Stainless steel internal structure with an aluminum alloy base for long-lasting durability

• Enlarged handle top with a finger-operated buckle for comfortable and controllable use

• Pull-back locking mechanism that simulates a real parking brake for realistic gameplay

Who Is This For

- Truck simulator fans who want a more realistic parking brake control in ETS2 and ATS

• Bus simulator players looking for an immersive handbrake for OMSI2 and The Bus Simulator

• PC racing enthusiasts who use Logitech or Thrustmaster wheels and want a dedicated handbrake

• Simulation gamers who prefer a separate USB device over keyboard-based controls

Usage Scenario

Mark spends his evenings driving long hauls in Euro Truck Simulator 2. He used to tap the spacebar for his parking brake, but it broke the immersion. After adding this USB handbrake, he now pulls the handle to stop at loading docks and releases it with a flick of his fingers. The clamp holds firm on his desk, and the aluminum base feels solid under his hand. Every parking stop now feels like he is really behind the wheel of a truck.

Micro Comparison

Unlike keyboard-based parking brakes that feel disconnected, this USB handbrace gives you a physical pull-and-release action that matches real truck controls. Many sim racers use paddle shifters for braking, but this dedicated handbrake adds a layer of realism that keyboard shortcuts cannot match. It is a simple upgrade that makes a big difference in immersion for simulation games.

Specifications

- Material: ABS Plastic, Cable, Aluminum Bracket

• Clamp Range: 8mm to 55mm (0.31 in to 2.17 in)

• Compatibility: Logitech G25, G27, G29, G920, G923, Thrustmaster T300RS, and most steering wheels

• System: Windows PC only (XP, 7, 8, 8.1, 10, 11)

• Not compatible with PS, Xbox, or other consoles

Package Includes

- 1 x PC USB Handbrake with Bracket

Why You Will Love It

This handbrake turns a simple keyboard command into a physical action that makes every parking stop feel real. The durable build means it will last through countless gaming sessions. It is an affordable way to upgrade your simulator setup without buying a new wheel.

Questions and Answers

Question: Does this handbrake work with a Logitech G29 on PC?

Answer: Yes, it works with the Logitech G29 on Windows PC. Just plug it into a USB port and set it up in your game.

Question: Can I use this handbrake with a Thrustmaster T300RS?

Answer: Yes, it is compatible with the Thrustmaster T300RS and most other steering wheels on PC.

Question: Do I need to install any drivers to use this handbrake?

Answer: No, it is plug-and-play. Just connect it via USB and it works without extra drivers.

Question: Will this handbrake work on a PlayStation or Xbox console?

Answer: No, it is only for Windows PC systems. It does not work with PlayStation, Xbox, or other consoles.

Question: How do I set up the handbrake in Euro Truck Simulator 2?

Answer: In ETS2, go to the controls settings, add the device, and map it to the parking brake option. It is quick and simple.

Question: Does the clamp fit on a thick desk?

Answer: Yes, the clamp fits surfaces from 8mm to 55mm thick, so it works on most desks and brackets.

Upgrade your BMW interior with this direct replacement electronic parking brake switch. Designed for specific 2016-2020 models, this button restores full functionality and adds a sporty black and red look to your center console. It is a simple fix for a worn or non-responsive parking brake control.

This switch is built from durable PC and ABS plastic with a rubberized coating. It feels solid in hand and matches the factory finish. The red stripe on the button provides a clear visual indicator, making it easy to locate at a glance. It is an ideal replacement for a damaged or faded original part.

The installation is straightforward. This button clips directly into the existing slot without any wiring modifications. Just remove the old switch and press the new one into place. It fits perfectly and works exactly like the factory component. Restore your BMW's parking brake function with a part that looks and performs like new.

Choose this replacement if you want a reliable fix that also adds a subtle custom touch. The black and red color scheme complements many BMW interiors. It is a cost-effective way to solve a common issue without visiting a dealership.

Key Features and Benefits

- Direct replacement design that installs into the original slot without any wiring or modifications.

• Made from durable PC and ABS material with a rubberized coating for a long-lasting, comfortable feel.

• Sporty black and red color scheme that adds a custom look to your BMW interior.

• Restores full parking brake switch function, solving issues caused by a worn or broken original part.

• Lightweight at 10.4g, ensuring it does not add unnecessary weight to your vehicle.

Who Is This For

- BMW owners with a 2016-2020 X1 F48 F49, X2 F39, or 2 Series F45 F46 needing a parking brake switch replacement.

• DIY mechanics looking for an easy, clip-in installation that requires no special tools.

• Drivers who want to restore a faded or non-functional parking brake button with a part that looks newer and more modern.

• Anyone upgrading their interior with subtle red accents to match other sport trim pieces.

Usage Scenario

Mark noticed his BMW X1's parking brake button was sticky and the red stripe had worn off. Every time he parked, he had to press the button multiple times to engage the brake. He ordered this replacement switch. After prying out the old unit, he snapped the new black and red button into the console. It clicked securely into place and worked perfectly on the first press. Now his parking brake engages cleanly, and the interior looks refreshed with the contrasting red detail.

Micro Comparison

Unlike a used or salvaged part that may have hidden wear, this new switch offers a fresh rubberized coating and a clean red stripe. It matches the factory fit and function without the uncertainty of a secondhand component. It provides a reliable, like-new experience at a fraction of the dealer cost.

Specifications

- Material: PC+ABS, Rubberized Coating

• Color: Black/Red

• Product Weight: 10.4g

• OEM No.: 6131 6822 523

• Compatible Models: For BMW 1 Series F52 (2016-2020), 2 Series F45 F46 (2016-2020), X1 F48 F49 (2016-2020), X2 F39 (2018-2020)

Package Includes

- 1 x Electronic Parking Brake Switch Control Button

Why You Will Love It

Fixing a broken parking brake switch is one of the most satisfying small repairs you can do. This part makes the job effortless and leaves you with a button that looks sharper than the original. You will appreciate the simple installation and the reliable click every time you park.

Questions and Answers

Question: Will this fit my 2018 BMW X2 F39?

Answer: Yes, this switch is designed for the BMW X2 F39 models from 2018 to 2020.

Question: Do I need any tools to install this parking brake button?

Answer: No special tools are required. You can pry out the old switch and press this one into place by hand.

Question: Is the red stripe on the button just for looks?

Answer: The red stripe provides a visual indicator for the parking brake button, making it easy to find quickly.

Question: What material is this switch made from?

Answer: It is made from PC and ABS plastic with a rubberized coating for durability and a good feel.

Question: Will this work on a 2017 BMW 2 Series F46?

Answer: Yes, it is compatible with the 2 Series F45 and F46 models from 2016 to 2020.

Keep your engine running smoothly and avoid unexpected breakdowns. This 3-in-1 car meter kit puts three critical gauges in one sleek, 52mm triple gauge set. Monitor your water temperature, oil pressure, and voltage at a glance for safer driving.

This triple gauge cluster is built for drivers who want real-time engine data. It combines a water temp gauge, a voltmeter, and an oil press gauge into a single, easy-to-install unit. The black chrome bezel gives your dashboard a professional, custom look.

Each gauge features a white dial with a red needle for quick reading. The illuminated display is easy to see in bright sunlight or at night. The metal frame is built to last, and the set comes with the accessories you need for installation.

This gauge set works with most 12V and 24V vehicles. It is a practical upgrade for cars, trucks, and marine applications where keeping an eye on engine vitals matters.

Key Features and Benefits

- 3-in-1 gauge kit that includes water temp, volt, and oil press meters so you monitor three critical engine functions from one cluster

• White dial with red needle that provides clear, accurate readings for safer driving

• Illuminated display that remains easy to read in both sunny and dim conditions

• High-quality metal frame and black chrome bezel that offer long-lasting durability and a stylish dashboard look

• Universal fit for most 12V/24V cars, trucks, and marine vehicles for broad compatibility

• Complete with necessary accessories for straightforward installation

Who Is This For

- Car enthusiasts who want to upgrade their dashboard with a professional triple gauge set

• Truck owners who need to monitor engine oil pressure and coolant temperature on long hauls

• Boat owners looking for a reliable water temp and voltage gauge for marine engines

• DIY mechanics who prefer a complete gauge kit with easy installation

Usage Scenario

Mark was driving his classic truck on a long highway trip when he noticed the engine temperature climbing. His old warning light had failed before. With this triple gauge set installed, he saw the water temp needle rise early, pulled over, and fixed a slow coolant leak before it became a major repair. The voltmeter also confirmed his alternator was charging correctly, giving him peace of mind for the rest of the drive.

Micro Comparison

Unlike single gauges that require separate mounting and wiring, this 3-in-1 kit combines three essential meters into one compact cluster. It saves dashboard space and simplifies installation. The black chrome bezel offers a more refined look than basic plastic gauge holders.

Specifications

Measurement Range: Volt gauge 8-16V, Water temp gauge 100-280 F, Oil press gauge 0-100 Psi

Dimension: 180mm * 65mm

Gauge Size: 52mm

Bezel: Black Chrome

Dial: White with red needle

Compatibility: 12V/24V vehicles

Package Includes

- 1X Triple Gauge Set

Keep a real-time eye on your engine's vital signs with the LUFI XS Gauge. This compact OBD2 display pulls data directly from your car's computer, showing turbo boost, oil pressure, oil temperature, and more on a clear LCD screen. It combines GPS, gyroscope, and G-value sensors to give you a complete picture of your vehicle's performance.

This head-up display is designed for drivers who want to monitor critical engine parameters without installing multiple separate gauges. The LUFI XS mounts on your dashboard, providing a clean, professional look that integrates with your vehicle's interior. It connects easily through the OBD2 port, making installation simple and non-invasive.

The display shows real-time data for turbocharged engines, including boost pressure and oil system status. The built-in gyroscope and G-value sensor add lateral and longitudinal acceleration readings, giving you performance metrics usually found in racing telemetry systems. The LCD screen is bright and easy to read, even in direct sunlight.

Whether you are tuning your car, monitoring engine health, or just want to know what your vehicle is doing under the hood, the LUFI XS Gauge delivers accurate, real-time information. It helps you catch potential issues early and understand how your driving affects engine performance.

Key Features and Benefits

- OBD2 plug-and-play connection that works with most vehicles for easy installation without professional help

• GPS and BDS satellite positioning for accurate speed and location data without relying on the car's speedometer

• Built-in gyroscope and G-value sensor that measure lateral and longitudinal acceleration for performance driving analysis

• Turbocharged oil pressure and oil temperature monitoring that helps you protect your engine from overheating or low pressure

• Clear LCD display with alarm buzzer that alerts you when parameters exceed safe limits

Who Is This For

- Car enthusiasts who want to monitor turbo boost and oil system health in real time

• Performance tuners who need precise data for engine calibration and troubleshooting

• Everyday drivers who want to keep an eye on their vehicle's vitals without installing permanent gauges

• Racers and track day participants who need G-value and acceleration data for improving lap times

Usage Scenario

Mike had just installed a turbo kit on his daily driver and wanted to make sure the oil system was working correctly. He plugged the LUFI XS Gauge into his OBD2 port and mounted it on the dashboard. During his first test drive, he noticed the oil temperature climbing faster than expected. The gauge's alarm buzzer went off, warning him before any damage could occur. He pulled over, let the engine cool, and adjusted his driving style. Now he monitors all key parameters every time he drives, catching small issues before they become big repairs.

Micro Comparison

Unlike single-function gauges that only show one parameter, the LUFI XS combines multiple sensors in one compact unit. It replaces the need for separate boost, oil pressure, oil temperature, and G-force gauges, saving dashboard space and installation time. The GPS and BDS integration gives you speed data that is independent of your car's speedometer, which is useful for vehicles with modified tire sizes or gear ratios.

Specifications

Material: Alarm buzzer, gyroscope, GPS and BDS

Item Length: 103 mm / 4.1 in

Item Width: 18 mm / 0.7 in

Item Height: 62 mm / 2.4 in

Item Weight: 0.45 kg / 15.9 oz

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x LUFI XS Gauge

• 1 x OBD2 cable

• 1 x Mounting kit

• 1 x User manual

Why You Will Love It

You get professional-grade engine monitoring in a compact, easy-to-install package. The LUFI XS helps you protect your investment by catching problems early. It turns your smartphone or tablet into a powerful diagnostic tool without taking up permanent space on your dashboard.

Questions and Answers

Question: Does this gauge work with diesel engines?

Answer: Yes, it supports most OBD2-compatible diesel vehicles, but check your car's compatibility for oil pressure and temperature parameters.

Question: Can I use this gauge on a non-turbocharged car?

Answer: Yes, it still shows speed, RPM, G-values, and other OBD2 data. The turbo-specific readings will just show zero.

Question: How do I mount the display on my dashboard?

Answer: The package includes a mounting kit. You can attach it using the included adhesive pad or a suction cup mount.

Question: Does the gauge record data for later analysis?

Answer: This model displays real-time data only. It does not have internal memory for logging, but you can view live readings while driving.

Question: Will the alarm buzzer drain my car battery?

Answer: No, the gauge draws very little power from the OBD2 port and only activates the buzzer when parameters exceed set limits.

Monitor your vehicle's vital systems with a single, compact display. This 5-inch 6-in-1 LCD gauge replaces multiple individual meters, giving you a clean dashboard setup and real-time data at a glance. It's built for any 12V car, truck, or SUV that needs reliable performance monitoring.

This multifunctional instrument panel combines essential readings like water temperature, voltage, and oil pressure into one easy-to-read LCD screen. The large 5-inch display makes it simple to check your vehicle's status without taking your eyes off the road for long. It's a practical upgrade for drivers who want a more organized and informative cockpit.

The gauge uses high-quality copper contact points for better conductivity and long-lasting performance. It responds quickly and accurately to changes in your vehicle's systems, helping you catch potential issues early. The plastic housing is durable and designed to fit standard dashboard openings.

Installation is straightforward for anyone with basic wiring knowledge. The unit connects directly to your 12V electrical system and starts working immediately. Whether you're building a custom project or just want better insight into your daily driver, this 6-in-1 meter delivers the information you need.

Key Features and Benefits

- 5-inch LCD screen that displays six functions in one unit, reducing dashboard clutter and simplifying monitoring

• Works with all 12V vehicle models, making it a versatile upgrade for cars, trucks, and SUVs

• Rapid and accurate sensor response, giving you real-time readings you can trust

• High-quality copper contact points that resist aging and improve electrical conductivity

• Multifunctional design that combines water temp, voltage, and oil pressure monitoring into a single gauge

Who Is This For

- Car enthusiasts who want a clean, modern dashboard with fewer individual gauges

• DIY mechanics and project builders looking for an all-in-one monitoring solution

• Daily drivers who want to keep an eye on engine health without installing multiple meters

• Anyone upgrading an older vehicle that lacks modern digital instrumentation

Usage Scenario

Mike had been driving his classic pickup truck for years, but the old analog gauges were hard to read and often inaccurate. After installing this 6-in-1 LCD gauge, he could finally see his water temperature, voltage, and oil pressure clearly on one bright screen. On a long highway trip, he noticed the voltage reading drop slightly and pulled over to check his alternator before it failed completely. The gauge gave him the early warning he needed to avoid a breakdown.

Micro Comparison

Unlike individual mechanical gauges that take up multiple dashboard slots and require separate wiring, this 6-in-1 LCD unit gives you all your essential readings in one compact display. The digital screen is easier to read at a glance compared to traditional needle gauges, and the copper contact points provide more reliable conductivity than cheaper alternatives. It's a simpler, cleaner solution for monitoring your vehicle's key systems.

Specifications

- Product Name: Car six-in-one modified instrument

• Product model: LCD5561

• Product size: 5 Inch

• Background light color: LCD

• Product voltage: 12V

• Product weight: about 540g

• Product shell material: plastic

• Applicable models: All vehicles suitable for 12V battery voltage

Package Includes

- 1 set car six-in-one meter

Why You Will Love It

You will love how this single gauge replaces the mess of multiple meters on your dashboard. The large LCD screen makes checking your vehicle's vitals effortless, and the quick response gives you confidence in your readings. It is a smart, practical upgrade that makes your driving experience more informed and less cluttered.

Questions and Answers

Question: Will this gauge work on my 2005 Ford F-150?

Answer: Yes, it works on any vehicle with a 12V battery system, including the Ford F-150.

Question: Does the screen show readings in real time?

Answer: Yes, the gauge provides rapid and accurate real-time readings for all six functions.

Question: Is this gauge difficult to install?

Answer: Installation requires basic wiring knowledge. The unit connects directly to your 12V system.

Question: What functions does the 6-in-1 display show?

Answer: It monitors water temperature, voltage, and oil pressure among other vehicle metrics.

Question: Is the display bright enough to read during the day?

Answer: Yes, the LCD screen is designed to be clear and readable in various lighting conditions.

This dashboard AC control panel frame is designed to fit Toyota Corolla models from 2002 to 2006. It provides a direct replacement for the original part, helping restore the look and function of your center console area.

Over time, the plastic frame around your air conditioning controls can crack, fade, or break. This replacement part lets you swap out the damaged piece quickly, giving your dashboard a cleaner and more finished appearance. The frame is built to match the factory specifications for a proper fit.

Made from durable plastic, this panel frame holds up to daily use and exposure to sunlight inside the car. It is a practical solution if you are restoring your Corolla's interior or fixing a broken trim piece. The OEM number 55411-1A200 confirms compatibility with your vehicle's original design.

Installing this frame helps protect the AC controls and gives the dashboard a uniform look. Whether you are repairing a single broken piece or refreshing the entire interior, this part is a straightforward upgrade for your Corolla.

Key Features and Benefits

- Direct fit for Toyota Corolla 2002-2006 models that saves time on installation

• Replaces damaged or faded AC control panel frames to restore a clean dashboard look

• Made from durable plastic that withstands heat and daily wear inside the car

• OEM number 55411-1A200 ensures compatibility with factory

specifications

- Front placement matches the original center console layout for a seamless swap

Who Is This For

- Toyota Corolla owners with a cracked or broken AC control panel frame

• DIY mechanics looking for an easy interior trim replacement part

• Car restorers refreshing the interior of a 2002-2006 Corolla

• Anyone wanting to upgrade a faded or sun-damaged dashboard piece

Usage Scenario

Mark noticed that the plastic frame around his Corolla's AC controls had a large crack near the temperature dial. Every time he adjusted the fan speed, the frame flexed and made a clicking noise. He ordered this replacement panel frame, popped the old one out, and snapped the new one into place in under ten minutes. Now the dashboard looks clean, and the controls feel solid again.

Micro Comparison

Some sellers offer generic trim pieces that require cutting or modification to fit. This frame is designed specifically for the Toyota Corolla 2002-2006 center console, so it matches the original shape and clip positions. You get a part that installs without extra work and looks like it came with the car.

Specifications

- OEM Number: 55411-1A200

• Placement: Front

• Applicable Models: Toyota Corolla 2002-2006

Package Includes

- 1 x Car Interior Center Dashboard AC Control Panel Frame with Box

Why You Will Love It

This frame gives your Corolla's interior a quick refresh without a costly trip to the shop. It is a simple fix that makes the dashboard look complete and well-maintained. You will enjoy driving with a clean, rattle-free center console again.

Questions and Answers

Question: Will this fit a 2004 Toyota Corolla?

Answer: Yes, this frame fits Toyota Corolla models from 2002 to 2006, including the 2004 model year.

Question: Does this come with the AC control knobs?

Answer: No, this is just the plastic frame and box. It does not include the control knobs or electronic components.

Question: Is this part the same as the original factory piece?

Answer: It is designed as a direct replacement with OEM number 55411-1A200, so it matches the original shape and fit.

Question: How hard is it to install this frame?

Answer: Installation is straightforward. You can usually pop out the old frame and snap the new one in by hand without special tools.

Question: Will this fit a right-hand drive Corolla?

Answer: This frame is designed for left-hand drive models. It may not fit right-hand drive configurations correctly.

Restore the interior look of your 2006 to 2012 Toyota RAV4 with this center dash air vent radio bezel trim. It replaces the worn or damaged panel around the radio and air vents for a clean, factory-like finish. This trim is designed to fit both the left and right sides of the dashboard.

This dashboard instrument cluster panel is made from durable ABS plastic. It comes as a pair of panels, one for the driver side and one for the passenger side. It is a direct replacement for the original parts, helping you avoid the cost of a full dealership repair.

Before you order, check your vehicle's original part numbers to confirm a proper fit. The compatible OEM numbers are 55413-42070 for the left side and 55412-42060 for the right side. If you are unsure about compatibility, contact us with your vehicle identification number for assistance.

This part is sold as a new, aftermarket replacement component. It is a practical solution for anyone looking to refresh their car's cabin without replacing the entire dashboard assembly.

Key Features and Benefits

- Direct fit replacement for the center dash air vent and radio bezel on a RAV4 that saves you time on installation

• Constructed from ABS plastic that provides long-lasting durability and a finish that matches the original dashboard texture

• Includes both left and right side panels that give you a complete and uniform dashboard upgrade

• Backed by a 2-year warranty that offers peace of mind for your purchase

Who Is This For

- Owners of a 2006-2012 Toyota RAV4 whose dashboard panel is cracked, faded, or damaged

• DIY car enthusiasts looking for an affordable interior restoration project

• Anyone who wants to upgrade the look of their vehicle's center console without professional labor costs

Usage Scenario

Mark noticed the plastic trim around his RAV4's radio was starting to crack from years of sun exposure. Instead of visiting a repair shop, he ordered this replacement bezel. Within an hour, he had removed the old panel and snapped the new one into place. The interior now looks clean and well-maintained, and he saved money by doing the work himself.

Micro Comparison

This trim panel is a direct replacement for your original factory parts, not a universal stick-on cover. It uses the same mounting points as the OEM components, so it fits securely without needing adhesive or modification. Choosing this part restores the original look rather than covering up damage.

Specifications

Material: ABS

Placement on Vehicle: Left and Right

Interchange Part Number: 55413-42070, 55412-42060

Manufacturer Part Number: 5541242060B1

Warranty period: 2 years

Package Includes

- 1 x Pair of Dashboard Air Vent Panel

Why You Will Love It

This trim piece gives your RAV4's cabin a fresh, like-new appearance without a major investment. It is a simple, durable fix that restores the look of your dashboard and protects the interior components underneath. You will appreciate how a small change can make your daily drive feel more comfortable and well-cared for.

Questions and Answers

Question: Will this fit my 2008 Toyota RAV4?

Answer: Yes, this trim panel is designed to fit the 2006-2012 Toyota RAV4, which includes the 2008 model year.

Question: Does this include the radio or air vents?

Answer: No, this package includes only the plastic bezel trim panel. You reuse your original radio and air vent components.

Question: Is this a genuine Toyota part?

Answer: This is a new aftermarket replacement part, not a genuine OEM Toyota part. It is designed to match the original specifications.

Question: How do I know if this part fits my car?

Answer: Check your vehicle's original part numbers. The left side uses 55413-42070 and the right side uses 55412-42060. If you are unsure, contact us with your VIN.

Question: Is the installation difficult?

Answer: Installation is straightforward for most DIYers. You typically remove the old panel by prying it off and snap the new one into place. Basic trim removal tools are recommended.

Keep your engine running at its best with this 52mm car gauge set. Designed for 12V gasoline vehicles, it gives you real-time readings for water temperature, oil temperature, oil pressure, fuel level, and voltage. The white LED backlight makes it easy to read day or night.

This gauge set is built to help you monitor your vehicle's vital signs. The black plastic shell fits standard 52mm openings, and the 1/8NPT sensor makes installation straightforward. Each gauge delivers clear data so you can spot issues before they become major problems.

Whether you're building a custom dash or replacing old gauges, this set covers the essentials. Track water temp from 40-120°C, oil temp from 50-150°C, oil pressure up to 100 PSI, and fuel level from 240-33 ohms, plus voltage from 8-16V. The white LED backlight keeps everything visible without being distracting.

Each gauge is sold separately, so you can pick exactly the readings you need. Built for durability and accuracy, this set helps you drive with confidence knowing your engine data is right in front of you.

Key Features and Benefits

- White LED backlight that makes gauges easy to read in low light or at night

• 52mm size that fits standard gauge pods and dash openings for a clean install

• 1/8NPT sensor compatibility that works with common aftermarket sensors

• Multiple measurement ranges that cover water temp, oil temp, oil pressure, fuel level, and voltage

• Black plastic shell that resists wear and matches most interior styles

• 12V compatibility that works directly with gasoline car electrical systems

Who Is This For

- Car enthusiasts building or upgrading a custom dashboard

• DIY mechanics who want to monitor engine health with real-time data

• Drivers of older vehicles that lack modern gauge displays

• Off-road or track day owners who need reliable readings under demanding conditions

Usage Scenario

Mike noticed his engine temperature creeping up during a long highway drive. His factory dash only had a warning light, not a precise reading. He installed this water temp gauge in his gauge pod and saw the exact temperature climbing toward 110°C. He pulled over before the engine overheated, saving a costly repair. Now he monitors oil pressure and voltage too, catching small problems before they turn into breakdowns.

Micro Comparison

Many universal gauges use confusing displays or weak backlighting that fades in sunlight. This set uses a clean white LED backlight and clearly marked scales for quick glances. The 52mm size is a standard fit, so you can install it without modifying your dash or buying adapters.

Specifications

Material: Plastic

Size: 52mm / 2.0 in (diameter)

Weight: 130g / 4.6 oz

Backlight: White LED

Voltage: 8-16V

Water Temp Range: 40-120°C / 100-250°F

Oil Temp Range: 50-150°C / 122-302°F

Oil Pressure Range: 0-100 PSI

Fuel Level Range: 240-33 ohm

Sensor Thread: 1/8NPT

Placement: Front mount

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x Gauge (your choice of Water Temp, Oil Temp, Oil Pressure, Fuel Level, or Voltage)

Why You Will Love It

You get precise engine data without cluttering your dash. The white LED backlight looks clean and modern, and the 52mm size fits standard pods. Each gauge is sold separately, so you only buy what you need for your setup.

Questions and Answers

Question: Will this work on a diesel engine?

Answer: This gauge set is designed for 12V gasoline vehicles. It may not be compatible with diesel systems.

Question: Can I install this gauge myself?

Answer: Yes, if you have basic wiring and mechanical skills. The 1/8NPT sensor threads into standard ports, and the wiring is straightforward for 12V systems.

Question: Does the gauge come with a sensor?

Answer: Yes, each gauge includes the matching sensor with a 1/8NPT thread.

Question: Is the backlight always on or switchable?

Answer: The white LED backlight is powered when the gauge is connected to a 12V source. You can wire it to your dash light switch if you prefer manual control.

Question: What size hole do I need to mount this gauge?

Answer: You need a 52mm (2.0 in) diameter hole for a flush fit. Most standard gauge pods accept this size without modification.

The Lufi XS LCD Gauge is a head up display that combines OBD and GPS data to show you turbo boost, oil pressure, oil temperature, G value, and gyroscope readings. This digital meter gives you real-time engine performance information right on your dashboard.

This OBD+GPS display helps you keep an eye on your vehicle's vital signs without taking your eyes off the road. It connects directly to your car's OBD port and uses GPS for speed and location data. The LCD screen shows multiple readings at once, so you can monitor turbo boost pressure, oil pressure, and oil temperature side by side.

The built-in gyroscope and G value meter add an extra layer of performance tracking. Whether you are tuning your engine or just want to know how your car is performing, this gauge gives you the numbers you need. The compact design fits neatly on your dashboard without blocking your view.

Installation is straightforward with the OBD connection. The display is bright and easy to read in different lighting conditions. It is a practical tool for anyone who wants to stay informed about their engine's condition and performance.

Key Features and Benefits

- OBD and GPS connectivity that provides accurate real-time data from your vehicle's computer

• LCD display that shows turbo boost, oil pressure, oil temperature, G value, and gyroscope readings

• Compact head up design that keeps information visible without obstructing your driving view

• Built-in gyroscope that adds motion and angle data for a more complete performance picture

• Easy OBD port installation that connects quickly without complicated wiring

Who Is This For

- Car enthusiasts who want to monitor turbo boost and oil pressure during performance driving

• DIY mechanics who like to keep an eye on engine health and oil temperature

• Daily drivers who want a clear heads up display for speed and vehicle data

• Track day users who need G value and gyroscope readings for cornering analysis

Usage Scenario

Mark drives a turbocharged sedan and likes to push it on weekend back roads. He noticed the factory gauges did not show oil pressure or turbo boost. He installed the Lufi XS gauge and now sees his boost levels and oil temperature in real time. On a recent drive, he spotted the oil temperature climbing higher than usual and backed off before any damage could happen. The gauge gave him the warning he needed.

Micro Comparison

Many OBD scanners only show basic engine codes or speed. This gauge goes further by displaying turbo boost, oil pressure, oil temperature, G value, and gyroscope data all on one screen. The head up design keeps the information in your line of sight, which is more convenient than looking at a phone app or a separate gauge pod.

Specifications

- Item Height: 62 mm

• Item Length: 103 mm

• Item Width: 18 mm

• Item Weight: 0.45 kg

• Material: Alarm buzzer, gyroscope, GPS and BDS

Package Includes

- 1 x Lufi XS LCD Gauge

• 1 x OBD cable

• 1 x GPS antenna

• 1 x User manual

Why You Will Love It

You will love having all your engine data in one clear display. It gives you confidence on the road and helps you catch potential issues before they become problems. The simple installation and compact size make it a smart upgrade for any car.

Questions and Answers

Question: Does this gauge work with diesel engines?

Answer: It works with most OBD2 compliant vehicles, including many diesel models. Check your vehicle's OBD compatibility before purchase.

Question: Can I see turbo boost in PSI or BAR?

Answer: Yes, the display lets you switch between different measurement units including PSI and BAR for turbo boost readings.

Question: Is the display bright enough for daytime driving?

Answer: The LCD screen has adjustable brightness levels to suit both daytime and nighttime driving conditions.

Question: Does it store historical data or only show real time readings?

Answer: The gauge focuses on real time readings. It does not have built-in memory for long term data logging.

Question: Will it drain my car battery when parked?

Answer: The gauge draws minimal power and many OBD ports shut off when the ignition is off. It is safe for normal use.

Monitor your engine's most vital systems with this 7-color 52mm car gauge kit. It displays PSI boost, RPM, water temperature, oil temperature, oil pressure, voltage, air-fuel ratio, and exhaust gas temperature in a single, easy-to-read LCD digital instrument. The kit is designed for 12-volt gasoline cars and offers a choice of seven backlight colors to match your dashboard style.

This digital gauge kit replaces the need for multiple separate gauges. Each function delivers real-time data so you can keep an eye on engine performance, cooling system health, and fuel mixture. The 52mm size fits standard gauge pods and holders, making installation straightforward.

Switching between the seven backlight colors lets you personalize the look of your gauge. Whether you prefer a subtle white glow or a vibrant blue, the LCD display stays clear and readable in both day and night driving conditions. The gauge is built with a plastic and glass construction for durability on the road.

Stay informed about critical engine parameters without cluttering your dashboard. This all-in-one gauge kit gives you the data you need to drive with confidence, whether you are tuning for performance or simply keeping your daily driver in top shape.

Key Features and Benefits

- Seven backlight colors that let you customize the gauge appearance to match your vehicle interior

• 52mm gauge size that fits standard gauge pods and holders for easy installation

• Displays eight engine parameters including boost, RPM, temperatures, pressure, voltage, AFR, and EGT for complete engine monitoring

• Plastic and glass construction that offers durability and long-lasting use under normal driving conditions

• LCD digital display that provides clear, real-time readings in various lighting conditions

• Designed for 12-volt gasoline cars (4/6/8 cylinder) for broad compatibility with most passenger vehicles

Who Is This For

- Car enthusiasts who want to monitor engine performance and health with a single digital gauge

• DIY mechanics installing aftermarket gauge pods in their vehicles for the first time

• Drivers of 12-volt gasoline cars looking for a cost-effective way to track boost, temps, and voltage

• Tuners and hobbyists who need real-time data on air-fuel ratio and exhaust gas temperature

Usage Scenario

Mike had just finished installing a turbo kit on his daily driver and needed a reliable way to keep an eye on boost pressure and engine temperatures. He mounted this 52mm gauge kit in his dash pod and set the backlight to a cool blue to match his interior. Now he can see PSI boost, water temp, oil pressure, and voltage all at a glance. On his morning commute, he noticed the oil temperature climbing higher than usual and pulled over before any damage occurred. The gauge gave him the warning he needed to check his cooling system before it became a bigger problem.

Micro Comparison

Unlike single-function gauges that require multiple pods and wiring, this kit combines eight key readings into one 52mm unit. It saves dashboard space and reduces the complexity of installation. The seven-color backlight option gives you more personalization than standard single-color gauges, making it easier to match your vehicle's existing lighting.

Specifications

Material: Plastic and glass

Gauge Size: 52mm

Booster Gauge (PSI): -30~30PSI

Water Temperature Meter: 40~140°C

Oil Temperature Meter: 40~140°C

Oil Press Meter: 0~100PSI

Voltmeter: 8~18V

Air Fuel Ratio Meter: 20:1~10:1

Exhaust Temperature Meter: 3~13×100°C

Backlight Colors: 7 colors

Compatibility: 12V gasoline cars (not for motorcycle, not for boat; tachometer suitable for 4/6/8 cylinder cars)

Package Includes

- 1 x Gauge

Why You Will Love It

You get a complete engine monitoring system in one compact gauge. The seven backlight colors let you personalize your dashboard, while the real-time LCD display keeps you informed about your car's performance. It is a practical upgrade that adds both function and style to your driving experience.

Questions and Answers

Question: Is this gauge kit compatible with diesel engines?

Answer: No, this gauge kit is designed for 12-volt gasoline cars only, not for diesel engines, motorcycles, or boats.

Question: Can I use this gauge with a 6-cylinder engine?

Answer: Yes, the tachometer function is suitable for 4, 6, and 8 cylinder gasoline cars.

Question: How do I change the backlight color?

Answer: The gauge includes a switch or button to cycle through the seven available backlight colors. The exact method is shown in the product manual or wiring diagram.

Question: Does this gauge come with the sensors and wiring harness?

Answer: The package includes one gauge unit. Sensors and wiring may need to be purchased separately depending on your specific installation requirements.

Question: What is the size of the gauge opening needed?

Answer: The gauge is 52mm in diameter, so you need a gauge pod or dash hole that fits a standard 52mm gauge.

Question: Can this gauge be installed in a car with a 12V electrical system that is not a gasoline engine?

Answer: No, it is only compatible with 12-volt gasoline cars. It is not designed for electric vehicles or hybrid powertrains.

Keep track of the time and temperature inside your car with this compact digital LCD clock and thermometer. It features a blue backlight and a handy clip for easy attachment to your air conditioner vent or sunshade. Simple, practical, and built for everyday driving.

This two-in-one device combines an electronic clock with a thermometer, so you always know the time and the cabin temperature at a glance. The LCD display is clear and easy to read, even in low light. The blue backlight can be activated with a button press and stays on for around 5 seconds, or you can switch to a longer-lasting energy-saving mode.

The included clip makes installation quick and secure. You can attach it directly to the air outlet or sunshade, keeping it within your line of sight without cluttering your dashboard. The adjustable angle lets you position the screen for the best view from the driver's seat.

Powered by two button batteries, this clock and thermometer set is ready to use right out of the box. It is a practical addition to any vehicle, especially if you prefer a simple, no-fuss way to monitor time and temperature while driving.

Key Features and Benefits

- Two-in-one clock and thermometer that shows the time and current temperature inside your car.

• Blue LED backlight that lights up for about 5 seconds when you press the button, or stays on for 30 minutes in energy-saving mode.

• Includes a clip for attaching to the car air conditioner outlet or sunshade, keeping it stable and easy to see.

• Adjustable angle design that lets you tilt the display for a better view from the driver's seat.

• Runs on 2 button batteries so you can place it anywhere without worrying about cables or power outlets.

Who Is This For

- Drivers who want a quick way to check the time and cabin temperature without looking at their phone.

• Car owners looking for a small, clip-on accessory that does not take up dashboard space.

• Anyone who drives at night or in low-light conditions and needs a clear, backlit display.

• People who prefer a simple, battery-powered device that is easy to install and move between vehicles.

Usage Scenario

Maria drives to work early each morning when it is still dark outside. She used to squint at her phone to check the time, but it was distracting. After clipping this digital clock and thermometer to her car's air vent, she can see the time and the temperature at a glance. The blue backlight lights up when she presses the button, and the display stays readable without being too bright. She no longer fumbles with her phone during her morning commute.

Micro Comparison

Unlike larger dashboard clocks that take up space or require wiring, this model clips directly onto your air vent or sunshade. It runs on button batteries, so there are no cables to hide. The two-in-one design saves you from buying a separate clock and thermometer, and the blue backlight gives you a clear reading even at night.

Specifications

Material: LCD night light display

Size: about 82 x 18 mm

Battery: 2 button batteries

Color: black with blue light

Structural type: adjustable angle

Type: electronic clock and thermometer

Package Includes

- 1 x Electronic clock

Questions and Answers

Question: Does this clock show the temperature in Fahrenheit or Celsius?

Answer: The source data does not specify. Please check the product manual or listing for temperature unit details.

Question: How do I turn on the backlight?

Answer: Press the button on the device. The blue backlight will light up for about 5 seconds.

Question: Can I keep the backlight on all the time?

Answer: Yes. Long press the button for 8 seconds to switch to energy-saving mode, which keeps the backlight on for 30 minutes. Press the switch again to turn it off.

Question: Where can I clip this device in my car?

Answer: You can clip it to the air conditioner outlet or the sunshade. The clip is included and designed for easy installation.

Question: What type of batteries does it use and are they included?

Answer: It uses 2 button batteries. The source data does not state whether batteries are included, so please confirm with the seller.

Replace your Toyota Yaris or Vios dashboard LCD screen with this direct-fit, plug-and-play instrument cluster accessory. Designed for models from 2008 to 2012, this LCD screen restores clarity to your vehicle's information display without complex wiring or modifications.

This dashboard LCD screen is built with higher-grade electronic components for reliable performance. Each unit is tested before shipping to ensure it works correctly right out of the box. The improved heat sink and charging capabilities help the screen maintain stable operation over time, making it a practical upgrade for aging displays.

Installation is straightforward. The screen fits directly into your existing instrument cluster housing with no assembly required. Just remove the old unit and plug in the new one. If your current display has faded, dimmed, or stopped showing key information like speed, fuel level, or warning lights, this replacement screen brings back full functionality.

The black LCD panel blends seamlessly with your dashboard interior. Whether you are restoring a used vehicle or fixing a worn-out cluster, this screen provides a clean, factory-like appearance.

Key Features and Benefits

- Direct replacement design that fits your existing dashboard cluster without modifications

• Plug-and-play installation that saves time and eliminates the need for professional wiring

• Higher-grade electronic components that support reliable long-term performance

• Improved heat sink and charging capabilities that help the screen handle daily driving conditions

• Pre-shipping testing on every unit to confirm functionality before delivery

• Black LCD display that matches the original interior look of your Toyota Yaris or Vios

Who Is This For

- Toyota Yaris owners with model years 2008 to 2011 who need a dashboard screen replacement

• Toyota Vios owners with model years 2008 to 2012 looking to restore their instrument cluster display

• DIY car enthusiasts who prefer a simple plug-and-play fix instead of a full cluster replacement

• Used car buyers or sellers who want to refresh the interior functionality of their vehicle

Usage Scenario

Marco noticed the LCD screen on his 2010 Toyota Yaris was getting harder to read in direct sunlight. The fuel gauge area flickered occasionally, and the odometer numbers looked faded. Instead of replacing the entire instrument cluster at a high cost, he ordered this dashboard LCD screen. After popping out the old screen and snapping the new one into place, the display came back crisp and clear. The whole job took less than 20 minutes in his driveway.

Micro Comparison

Some sellers offer entire instrument clusters that cost more and require reprogramming. This LCD screen focuses on the most common failure point: the display itself. By replacing just the screen, you save money and keep your original cluster's mileage and settings intact. It is a targeted fix for a specific problem rather than an expensive overhaul.

Specifications

Color: Black

Material: LCD

Fitment: For Toyota Vios 2008-2012, For Toyota Yaris 2008-2011

Package Includes

- 1 x Dashboard LCD Screen

Why You Will Love It

You get a direct-fit screen that brings your dashboard back to life without complicated installation. It is a simple, cost-effective way to restore visibility to your vehicle's key information. Knowing each unit is tested before shipping gives you confidence that the part will work when it arrives.

Questions and Answers

Question: Will this screen fit my 2009 Toyota Yaris sedan?

Answer: Yes, this LCD screen is designed for Toyota Yaris models from 2008 to 2011.

Question: Do I need to solder or cut any wires to install this screen?

Answer: No. Installation is plug-and-play with no soldering or wire cutting required.

Question: Does this include the entire instrument cluster or just the LCD screen?

Answer: This package includes only the dashboard LCD screen. It does not include the full cluster housing or circuit board.

Question: Will my mileage and settings stay the same after replacing the screen?

Answer: Yes, because you are only replacing the display screen. Your original cluster retains its stored mileage and settings.

Question: Is this screen compatible with a right-hand drive Toyota Vios?

Answer: This screen is designed for the dashboard LCD display and should fit both left-hand and right-hand drive models of the Toyota Vios 2008-2012.

Keep an eye on the temperature inside and outside your vehicle with this compact and convenient DC 12V car thermometer. It features a clear LCD display, a waterproof external probe, and a simple installation process for any car.

This digital thermometer is designed to give you accurate temperature readings in real time. The main unit measures the temperature inside your car, while the included 1.5-meter probe cable monitors the conditions outside. It is a practical tool for ensuring comfort and safety on every drive.

The thermometer is built to withstand the high temperatures and vibrations common in a vehicle. It offers flexible power options, working with your car's 12V or 24V power supply for a backlit display, or using an AG10 battery for standalone temperature monitoring. The adjustable bracket allows you to position the display for easy viewing.

With its low power consumption and straightforward setup, this sensor is an efficient and reliable addition to your car's accessories. It helps you understand your driving environment better without any complicated wiring.

Key Features and Benefits

- Dual temperature display that shows both inside and outside car temperature for a complete view of your environment.

• 1.5-meter waterproof probe cable that allows you to easily place the sensor outside the door for accurate external readings.

• 12/24V car universal compatibility and ultra-simple installation for a hassle-free setup in most vehicles.

• Vehicle-mounted high temperature and vibration resistance that ensures reliable performance in tough driving conditions.

• Adjustable bracket angle for securing and positioning the display exactly where you want it.

• Low power consumption and super power saving design for extended use without draining your car battery.

Who Is This For

- Car owners who want to monitor the exact temperature inside their vehicle for comfort.

• Drivers who need to check outside temperatures, especially during winter or extreme weather.

• Anyone looking for a simple, no-fuss digital thermometer for their car or truck.

• Users who prefer a device with both battery and car power options for flexible use.

Usage Scenario

On a cold winter morning, Mark steps into his car and sees the internal temperature is below freezing on the LCD display. He knows the external probe, placed outside the door, shows it is even colder outside. He uses the information to decide how long to let the car warm up before driving. The backlight from the car power supply makes the numbers easy to read, and he adjusts the bracket for a clear view. This simple device helps him plan his drive safely.

Micro Comparison

Unlike basic car thermometers that only show one temperature, this model provides a dual reading for a more complete picture. The included 1.5-meter waterproof probe and adjustable bracket offer more flexible installation than simpler single-unit sensors. It is a practical and durable choice for any vehicle.

Specifications

- Power Supply: 12V/24V car power or AG10 battery

• Temperature Measuring Range (Inside): -20 to +70 C

• Temperature Measuring Range (Outside): -50 to +70 C

• Probe Cable Length: 1.5 meters

• Display: LCD with blue backlight (when connected to car power)

• Features: Double temperature inside and outside, vehicle-mounted high temperature and vibration resistance, low power consumption

Package Includes

- 1 x Car Mini LCD Digital Thermometer

• 1 x 1.5M Waterproof Probe Cable

• 1 x Bracket

Why You Will Love It

You will appreciate the peace of mind that comes from knowing the exact temperature inside and outside your car. Its simple installation and durable design make it a reliable travel companion. This small device adds a layer of convenience to your daily routine.

Questions and Answers

Question: How do I install the external temperature probe?

Answer: You fix the main unit in your car and place the waterproof probe outside the door to measure the external temperature.

Question: Does the thermometer work with a 24V truck system?

Answer: Yes, it is designed to work with both 12V and 24V vehicle power systems.

Question: Can I use the thermometer without plugging it into the car?

Answer: Yes, you can install an AG10 battery to use the thermometer for testing temperature inside and outside the vehicle without the car power supply.

Question: What is the temperature range for the internal sensor?

Answer: The internal temperature measuring range is -20 to +70 degrees Celsius.

Question: How long is the probe cable?

Answer: The probe cable is 1.5 meters long, giving you flexibility to place the sensor outside the door.

Keep your vehicle's cabin comfortable and your electrical system in check with this 3-in-1 car temperature clock and voltmeter. It combines a precise time display, internal and external temperature readings, and a real-time voltage monitor in one compact, easy-to-read unit. The luminous digital display adjusts automatically, so you can see key information clearly whether you are driving at night or in bright daylight.

This multifunctional module is designed for drivers who want to stay informed without cluttering their dashboard. It uses a high-precision time chip for accurate timekeeping and includes two waterproof temperature probes to measure conditions both inside and outside your car. The voltmeter function helps you monitor your battery and charging system, giving you peace of mind on every trip.

Installation is straightforward with the included mounting screws, and the device fits into a standard 19.5 x 56 mm opening. You can choose between three display colors and adjust the brightness to suit your preference. Whether you drive a car, truck, SUV, or recreational vehicle, this tool helps you manage your environment and vehicle health with a quick glance.

This temperature gauge is built from durable ABS plastic and operates on a wide voltage range of 5 to 28V DC. It is a practical addition for anyone who wants to monitor their vehicle's temperature and voltage without installing multiple separate gauges.

Key Features and Benefits

- 3-in-1 functionality that combines a clock, thermometer, and voltmeter, reducing dashboard clutter while keeping essential information at hand.

• High-precision RX8025T time chip with temperature compensation that maintains accurate time regardless of weather conditions.

• Two waterproof temperature probes (0.3 m and 1.5 m) that let you measure both interior and exterior temperatures, helping you adjust your climate control for comfort.

• Automatic brightness adjustment with three manual levels that ensures the display is always readable, from bright sunlight to dark night driving.

• Wide operating voltage range of 5-28V DC that makes it suitable for cars, trucks, off-road vehicles, agricultural vehicles, and boats.

Who Is This For

- Daily commuters who want to monitor their car battery voltage and avoid unexpected breakdowns caused by a failing alternator or battery.

• Long-distance drivers and road trip enthusiasts who need to track both cabin and outside temperatures for a more comfortable journey.

• Off-road and agricultural vehicle owners who require a durable, easy-to-read gauge that works in rugged conditions and wide temperature ranges.

Usage Scenario

Sarah drives a 10-year-old truck for her daily commute and weekend camping trips. She noticed the dashboard clock was always wrong and had no way to check her battery voltage. After installing this 3-in-1 unit, she can see the exact time, monitor her battery level to avoid getting stranded, and check the outside temperature before heading into the mountains. The auto-brightness feature keeps the display clear without blinding her at night.

Micro Comparison

Unlike basic car clocks that only show the time, this module adds temperature and voltage monitoring without requiring separate gauges. Many standalone voltmeters lack temperature probes, and simple thermometers do not track battery health. This all-in-one solution saves space and provides more useful data for the same installation effort.

Specifications

- Material: ABS

• Product size: 58 x 22 mm / 2.3 x 0.9 in

• Installation opening size: 19.5 x 56 mm / 0.8 x 2.2 in

• Operating voltage: DC 5-28V

• Temperature display range: -35 to 120 °C (error ±1 degree)

• Voltage display range: 5.0 to 28 V (error ±0.1V)

• Housing color: Black

• Font display colors: Red, Blue, Green (selectable)

• Item weight: 30 g

• Probe length: 0.3 m + 1.5 m (two waterproof probes)

Please allow 1-2 cm / 0.4-0.8 in difference due to manual measurement.

Package Includes

- 1 x Car Thermometer Voltmeter

Why You Will Love It

You will appreciate knowing your battery is healthy and your cabin is at the right temperature without adding bulky equipment to your dashboard. The luminous display and simple installation make it a practical upgrade for almost any vehicle. It gives you the confidence to drive farther and stay comfortable, all from one compact device.

Questions and Answers

Question: Can I install this in a 12V car?

Answer: Yes, it works on DC 5-28V, so it is compatible with standard 12V car electrical systems.

Question: How do I switch between the clock, temperature, and voltage displays?

Answer: The unit can display a single item or cycle through them automatically. You can customize which items are shown using the control settings.

Question: Are the temperature probes waterproof?

Answer: Yes, both probes are waterproof, so you can place one outside the vehicle to measure external temperature without damage.

Question: What colors can the display show?

Answer: You can choose between red, blue, or green font colors to match your dashboard style or preference.

Question: Does the brightness adjust on its own?

Answer: Yes, it has an auto-brightness function that senses ambient light and adjusts the display brightness for clear visibility day and night.

This 52mm waterproof clock gauge gives you a clear and reliable 12-hour display for your vehicle or vessel. It works with a wide 9-32V power range and offers customizable backlight colors to match your dashboard style.

Keeping track of time while driving or boating should be simple and stress-free. This hourmeter gauge fits into a standard 52mm opening and provides an easy-to-read analog display with a bright red, blue, or white backlight. The IP67 waterproof rating means it can handle splashes and moisture without issues, making it a solid choice for marine use or off-road vehicles.

The gauge is built with a stainless steel and plastic housing that resists corrosion and wear. Installation is straightforward with the included cables and instructions. Just make sure you connect the wires correctly to avoid damage. The adjustable backlight lets you pick the color that works best for your nighttime visibility or personal preference.

Whether you are upgrading your car dashboard, adding a clock to your truck, or equipping a boat or yacht, this gauge delivers accurate timekeeping in a durable package. It operates reliably in temperatures from -40°C to +85°C, so it performs well in extreme conditions.

Key Features and Benefits

- IP67 waterproof rating that protects the gauge from moisture and splashes in marine or outdoor environments

• Customizable red, blue, or white backlight that lets you match your dashboard lighting or improve nighttime visibility

• Wide 9-32V operating voltage that works with most cars, trucks, boats, and motorcycles

• Stainless steel and plastic construction that resists corrosion and stands up to vibration and wear

• Standard 52mm size that fits into common gauge openings for easy replacement or installation

• Analog 0-12 hour display that provides a quick and intuitive time reading at a glance

Who Is This For

- Car and truck owners who want a reliable dashboard clock with a customizable backlight

• Boat and yacht operators who need a waterproof time gauge that can handle marine conditions

• Motorcycle riders looking for a compact and durable hourmeter for their handlebars or fairing

• DIY enthusiasts upgrading their vehicle's instrument panel with a functional and stylish gauge

Usage Scenario

Mark owns an older fishing boat that never had a working clock. He spends long days on the water and needs to keep track of time for navigation and safety. He installs this 52mm waterproof gauge in his dash, choosing the blue backlight to match his other instruments. The clear analog face lets him check the time at a glance even under direct sunlight. After a season of saltwater splashes and rough weather, the gauge still works perfectly without any fogging or corrosion.

Micro Comparison

Many basic car clocks lack waterproofing and can fail in humid or wet conditions. This gauge offers IP67 protection and a wide voltage range, so it works in cars, trucks, boats, and motorcycles. The customizable backlight gives you more flexibility than standard fixed-color gauges, and the stainless steel build adds durability that plastic-only clocks cannot match.

Specifications

- Material: Stainless Steel & Plastic

• Size: 52mm / 2.0 in diameter

• Backlight: Red, Blue, or White

• Protection Rank: IP67

• Operating Voltage: 9-32V DC

• Indicator Range: 0-12 Hours

• Operating Temperature: -40°C to +85°C / -40°F to +185°F

• Item Weight: 0.35 kg / 12.3 oz

Package Includes

- 1x 52mm Clock Gauge

• 1x Cables

• 1x Installation Instruction

Why You Will Love It

You will appreciate the peace of mind that comes with a waterproof, durable gauge that keeps working in tough conditions. The ability to switch between red, blue, or white backlight means you can customize your dashboard look without buying extra parts. It is a simple upgrade that adds both function and style to your vehicle or boat.

Questions and Answers

Question: What vehicles can this clock gauge be used on?

Answer: It works on cars, trucks, boats, yachts, and motorcycles with a 9-32V electrical system.

Question: Is the backlight always on or can it be turned off?

Answer: The backlight is customizable and can be set to red, blue, or white. It stays on when the gauge is powered.

Question: How do I install this gauge?

Answer: Connect the wires according to the included instructions. Do not connect the black wire to the positive terminal to avoid damage.

Question: Is this gauge truly waterproof?

Answer: Yes, it has an IP67 rating, which means it is protected against dust and can handle immersion in water up to 1 meter for 30 minutes.

Question: What is the size of the gauge opening needed?

Answer: You need a standard 52mm / 2.0 in diameter hole to mount this gauge.

Question: Can I use this gauge in extreme temperatures?

Answer: Yes, it operates from -40°C to +85°C / -40°F to +185°F, so it works in very cold and very hot conditions.

Transform your BMW's instrument cluster with the M Track Emulator BDC3 module. This plug-in module upgrades your standard dashboard to a dynamic M Track sports theme, bringing race-inspired visuals and real-time performance data to your iDrive7 system. Designed for G Series and select X Series models, it activates the M HUD rainbow speed bar and adds sport widgets like accelerometer and engine data to the left side of your instrument panel.

This module replaces the standard BMW 3 Series theme with an M3 Track interface. Switching your driving mode to SPORT instantly changes the instrument cluster style, giving you a more engaging driving experience. The module also supports M or M3 icon switching, letting you customize the look to match your preference.

Installation requires professional coding after the module is placed in the passenger side glove box. Detailed installation and coding instructions are provided. For remote coding assistance, you will need an ENET cable and a laptop. This upgrade is ideal for BMW owners who want a more aggressive, track-inspired dashboard without replacing the entire system.

Key Features and Benefits

- M Track interface that synchronizes with M HUD for a cohesive sports driving display

• SPORT mode activation that switches the instrument cluster to the M Track theme automatically

• M HUD rainbow speed bar that adds a vibrant, race-style speed indicator to your heads-up display

• Left-side instrument panel widgets including accelerometer, tire pressure, and engine data for real-time performance monitoring

• M or M3 icon switching that lets you personalize the dashboard emblem to your taste

Who Is This For

- BMW G Series owners with iDrive7 systems who want a sportier dashboard appearance

• Drivers who use SPORT mode regularly and want the instrument cluster to reflect that driving style

• Enthusiasts looking to add performance data widgets like accelerometer and engine metrics to their display

• BMW owners who want to activate the M HUD rainbow speed bar for a more dynamic driving experience

Usage Scenario

Mark drives his 2021 BMW 330i on weekend canyon roads. He loves the handling but always felt the standard dashboard was too calm for the car's personality. After installing the M Track Emulator, he switches to SPORT mode and watches the instrument cluster transform into an M3 Track interface. The HUD now displays a rainbow speed bar, and the left side of the dash shows real-time accelerometer readings. Every drive feels more connected to the road.

Micro Comparison

Unlike simple dashboard skins that only change colors, this module actively links the instrument cluster to your driving mode and activates performance widgets. It also syncs with the M HUD for a unified sports display. For BMW owners with iDrive7, this is a direct upgrade that transforms the driving experience without needing a full system replacement.

Specifications

- Material: ABS

• Instrument Type: For BMW iDrive7 series dashboard

• Placement on Vehicle: Passenger side glove box

• Special Features: Support M HUD

• Item Weight: 100 g

• Item Dimensions: 15 cm x 5 cm x 2 cm / 5.9 in x 2.0 in x 0.8 in

• OEM No.: MU20220223HW03SW39101

Package Includes

- 1 x M Track Emulator Module

• 1 x Installation and Coding Instruction Guide

Why You Will Love It

You will love the instant transformation from a standard dashboard to a track-inspired interface every time you hit SPORT mode. The M HUD rainbow speed bar and performance widgets make each drive feel more purposeful. It is a simple upgrade that brings a piece of M performance DNA to your daily drive.

Questions and Answers

Question: Will this module work on my 2022 BMW X5 with iDrive7?

Answer: Yes, this module is compatible with BMW G Series models including X5, X6, and X7 from 2020 to 2023 that have iDrive7.

Question: Do I need to code the vehicle after installing the module?

Answer: Yes, coding is required after installation. We provide detailed instructions, and paid remote coding assistance is available if you have an ENET cable and a laptop.

Question: Does this module change the dashboard permanently?

Answer: No, the M Track theme activates when you switch to SPORT mode. Your standard dashboard remains unchanged in other driving modes.

Question: Can I switch between the M and M3 icon on the dashboard?

Answer: Yes, the module allows you to choose between M or M3 icon display to match your preference.

Question: What widgets appear on the left side of the instrument panel?

Answer: The left side shows sports mode widgets including accelerometer data, tire pressure information, and engine performance data.

Replace your cracked, unresponsive, or delaminated Cadillac CUE touch screen with this direct-fit glass replacement. Designed for 2013 to 2017 models including ATS, SRX, XTS, CTS, and Escalade, this aftermarket screen restores full touch functionality without replacing the entire radio unit.

The original Cadillac CUE system is known for screen failure over time. This replacement solves that problem at a fraction of the dealership cost. It comes as a single glass touch screen layer, not the full display module, so installation requires removing the old screen and bonding this new one in its place. The package includes removal tools to help with the process.

This part uses OEM numbers 23243166, 20867045, 22912608, 22935061, and 22980207 for cross-reference. Before ordering, verify your vehicle year and model to confirm compatibility. The screen is made of black glass and is sold as an aftermarket replacement component.

Key Features and Benefits

- Direct replacement glass touch screen that restores CUE system responsiveness without buying a new radio unit

• Compatible with multiple Cadillac models from 2013 to 2017 so it fits a wide range of vehicles in one part

• Includes removal tools that make the swap easier and reduce the risk of damaging interior trim

• Aftermarket pricing that costs significantly less than a dealer or OEM replacement screen

• Black glass finish that matches the factory look and maintains the original dashboard appearance

Who Is This For

- Cadillac owners with a peeling, cracked, or unresponsive CUE touch screen who want a budget-friendly fix

• DIY mechanics comfortable with interior trim removal and basic electronics installation

• Drivers of 2013-2016 ATS, 2013-2016 SRX, 2013-2016 XTS, 2013-2017 CTS, or 2015-2017 Escalade models

• Anyone looking to restore factory touch screen function without upgrading to an aftermarket radio system

Usage Scenario

Michael noticed his 2014 Cadillac ATS touch screen stopped responding to taps in the lower corners. The dealership quoted over $800 for a new CUE unit. He ordered this replacement glass screen, watched an online tutorial, and spent an afternoon carefully swapping the old screen for the new one. After reassembly, the touch controls worked like new, and he saved over $600.

Micro Comparison

Dealership replacement requires buying the entire CUE assembly at a high cost. This aftermarket glass screen covers the same touch layer at a fraction of the price. While installation takes more effort, the savings make it a practical choice for anyone willing to do the work themselves.

Specifications

- Type: Touch Screen

• Material: Glass

• Color: Black

• Part Numbers: 23243166, 20867045, 22912608, 22935061, 22980207

• Fitment: 2013-2016 Cadillac ATS, 2015-2017 Cadillac Escalade, 2013-2016 Cadillac SRX, 2013-2016 Cadillac XTS, 2013-2017 Cadillac CTS CTS-V

Package Includes

- 1 x Aftermarket Touch Screen

• 1 set of Removal Tools

Why You Will Love It

You can fix a frustrating CUE screen failure without the dealership markup. This replacement brings back reliable touch control and keeps your Cadillac interior looking original. It is a straightforward DIY project that saves hundreds of dollars.

Questions and Answers

Question: Does this screen fit a 2015 Cadillac Escalade?

Answer: Yes, it fits 2015-2017 Cadillac Escalade models.

Question: Is this the full display unit or just the glass layer?

Answer: This is the touch screen glass layer only, not the complete display module.

Question: Do I need special tools to install this?

Answer: The package includes a set of removal tools to help with the installation.

Question: What OEM numbers does this screen replace?

Answer: It replaces OEM numbers 23243166, 20867045, 22912608, 22935061, and 22980207.

Question: Will this work on a 2013 Cadillac CTS?

Answer: Yes, it fits 2013-2017 Cadillac CTS and CTS-V models.

The SimRuito racing dashboard brings a 10.3 inch high-definition display to your sim racing setup. Designed for PC users, this steering wheel dashboard connects with Simhub to show real-time speed, engine data, and tire information. It helps you monitor every critical parameter without taking your eyes off the track.

This sim racing display features a 1920*720 resolution that delivers sharp and clear visuals. The wide screen layout shows multiple data points at once, so you can check your speed, RPM, and tire temperature in a single glance. The plug-and-play design means you can set it up quickly and start racing without installing extra drivers.

The dashboard works seamlessly with Simhub, allowing you to customize your display layout with one click. Whether you prefer a classic gauge look or a modern digital readout, this screen adapts to your style. Its slim 30mm height makes it easy to mount on your steering wheel or rig without adding bulk.

Built for serious sim racers, this 10.3 inch display helps you stay focused on your lap times and race strategy. The high refresh rate minimizes motion blur, so you get accurate readings even during fast corners and heavy braking zones. It is a practical upgrade for anyone looking to improve their racing performance.

Key Features and Benefits

- 10.3 inch wide screen that provides a clear view of full-range racing data, eliminating the clutter of smaller displays

• 1920*720 high-definition resolution that delivers sharp visuals with no motion blur for accurate engine speed and tire temperature readings

• No driver installation required with plug-and-play setup that lets you jump into racing instantly

• Seamless compatibility with Simhub that enables custom dashboard layouts with one click

• Compact 30mm height that fits easily on steering wheels or rigs without adding extra weight

Who Is This For

- PC sim racers who want a dedicated display for real-time speed and engine data

• Simhub users looking for a plug-and-play dashboard that supports custom layouts

• Racers who need a wide screen to monitor multiple parameters like RPM and tire temperature at once

• Enthusiasts upgrading from small or built-in screens to a larger, clearer racing display

Usage Scenario

Mark spent hours practicing for an online endurance race, but his small laptop screen made it hard to track tire temperature and fuel levels. He installed the SimRuito 10.3 inch dashboard on his wheel, connected it to Simhub, and customized the layout to show his most important data. Now he can see his speed and tire wear at a glance, helping him push harder in corners and manage his pit stops better.

Micro Comparison

Many sim racing displays use smaller 5 or 7 inch screens that force you to scroll through data pages. This 10.3 inch wide panel shows all your key metrics on one screen, so you never miss a shift or a tire temperature spike. Its 1920*720 resolution also provides sharper text and graphics than lower-resolution alternatives, making it easier to read data during high-speed racing.

Specifications

Dashboard resolution: 1920*720

Instrument panel size: 10.3 inches

Item Height: 30mm / 1.2 in

Item Length: 303mm / 11.9 in

Item Width: 140mm / 5.5 in

Item Weight: 1800g / 63.5 oz

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x SimRuito Racing Dashboard

Why You Will Love It

This dashboard turns your sim rig into a professional cockpit with a large, clear display that shows exactly what you need. The plug-and-play setup with Simhub means you spend less time configuring and more time racing. It is a straightforward upgrade that makes every lap more immersive and informed.

Questions and Answers

Question: Does this display work with consoles like PlayStation or Xbox?

Answer: This dashboard is designed for PC use only. It connects through USB and works with Simhub software on Windows.

Question: Can I use this without Simhub?

Answer: The display is optimized for Simhub. While it may work with other software, Simhub provides the easiest setup and full customization.

Question: How do I mount this to my steering wheel?

Answer: The dashboard has a slim 30mm profile and can be mounted using standard VESA or custom brackets. You will need your own mounting hardware.

Question: Does it show tire temperature and brake pressure?

Answer: Yes, when connected to Simhub, you can display tire temperature, brake pressure, speed, RPM, and many other parameters from supported racing games.

Question: Is the screen bright enough for use in a well-lit room?

Answer: The display has good brightness for indoor use. Direct sunlight may cause glare, but it works well in typical sim racing setups with ambient lighting.

Monitor your water and sewage levels from a single dashboard gauge. This 52mm digital dual gauge displays both fresh water and holding tank levels with a programmable alarm, giving you clear readings at a glance. Compatible with 12V and 24V systems, it works with 0-190 ohm sensors for a wide range of boats, RVs, and vehicles.

This gauge is built for real-world conditions. It features a built-in 20-second reading delay so splashing water in the tank does not cause erratic readings. The high-resolution LED screen stays visible even in direct sunlight, and the IP66 waterproof rating ensures reliable operation in marine and outdoor environments. You can program the input resistance signal to match different sensor types including 0-190 ohm, 0-180 ohm, 10-180 ohm, 240-33 ohm, and 240-30 ohm.

Installation is straightforward. The gauge fits into a standard 52mm (2-inch) panel cutout, and the included wiring harness connects to your power source and sensors. The gauge is sold individually and does not include a sensor. If you need a sensor, it is available separately. The package includes the gauge, a user manual, and a wiring cable.

This dual gauge replaces the need for two separate meters, saving space on your dashboard. Whether you are managing fresh water and waste tanks on a boat, motorhome, or truck, this single unit gives you the information you need without clutter.

Key Features and Benefits

- Dual display shows both water level and sewage level on one gauge that saves dashboard space and simplifies monitoring

• Programmable input resistance from 0-190 ohm to 240-30 ohm that allows compatibility with various sensor types

• Built-in 20-second reading delay that prevents false readings from water splashing inside the tank

• High-resolution LED screen that remains readable under direct sunlight for clear visibility at all times

• IP66 waterproof rating that protects the gauge from water spray and harsh marine conditions

• Reverse polarity protection that prevents damage from incorrect wiring during installation

Who Is This For

- Boat owners who need to monitor fresh water and holding tank levels from a single gauge

• RV and motorhome users who want a clean dashboard setup without multiple separate meters

• Truck and hot rod builders who require a compact tank level monitoring solution for custom builds

• Generator operators who need reliable tank level readings in outdoor or industrial environments

Usage Scenario

Mark spends weekends on his cabin cruiser with his family. Before this gauge, he had to check two separate meters to see if the fresh water tank was getting low and if the holding tank was getting full. After installing this dual gauge, he can see both levels on one screen. The alarm alerts him when the sewage tank approaches capacity, so he knows exactly when to pump out. No more guessing or checking multiple locations.

Micro Comparison

Traditional tank gauges require one meter per tank, taking up twice the dashboard space and requiring separate wiring. This dual gauge combines both readings into a single 52mm unit, reducing installation time and simplifying your panel layout. The programmable signal range also means you are not locked into a single sensor type, giving you more flexibility compared to fixed-resistance gauges.

Specifications

Diameter: 52mm / 2.0 in

Item Height: 52mm / 2.0 in

Item Length: 150mm / 5.9 in

Item Width: 52mm / 2.0 in

Item Weight: 150g / 5.3 oz

Material: Stainless Steel

Signal: 0-190 ohm (programmable)

Working Voltage: 12V / 24V

Working Temperatures: -40 to 85°C / -40 to 185°F

Waterproof Rating: IP66

Sensor Length (if purchased separately): 100-600mm / 3.9-23.6 in (customizable)

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x Digital Dual Gauge

• 1 x User Manual

• 1 x Wiring Cable

Note: This package includes the gauge only. The sensor is sold separately.

Why You Will Love It

You will appreciate having one clean gauge instead of two cluttered meters on your dashboard. The alarm gives you peace of mind that you will never be caught off guard by a full holding tank. And the programmable signal range means this gauge can adapt to your existing sensors or future upgrades without needing a new meter.

Questions and Answers

Question: Does this gauge work with both fresh water and sewage tanks at the same time?

Answer: Yes, the gauge has two independent inputs. One displays water level and the other displays sewage level, both on the same screen.

Question: What size hole do I need to cut for installation?

Answer: You need to cut a 52mm (2-inch) diameter hole. The gauge fits standard 52mm panel cutouts.

Question: Does the gauge come with a sensor?

Answer: No, the gauge is sold separately. The package includes the gauge, manual, and wiring cable. Sensors are available as separate items.

Question: Can I use this gauge with a 0-180 ohm sensor?

Answer: Yes, the gauge is programmable. You can set it to work with 0-190 ohm, 0-180 ohm, 10-180 ohm, 240-33 ohm, or 240-30 ohm sensors.

Question: How long does it take for the reading to update when the tank level changes?

Answer: The gauge has a built-in delay of about 20 seconds. This prevents the display from jumping around due to water splashing inside the tank.

Question: Is this gauge suitable for use in a marine environment?

Answer: Yes, it has an IP66 waterproof rating and is designed for marine boats, trucks, RVs, and other vehicles exposed to moisture.

Question: What voltage does this gauge work with?

Answer: It works with both 12V and 24V DC systems.

Keep an eye on your car's battery health, interior temperature, and the time with a single, easy-to-read device. This 3-in-1 digital display combines a voltmeter, thermometer, and clock into one compact unit, helping you monitor your vehicle's condition at a glance.

This practical car accessory fits neatly into your dashboard, providing real-time information without cluttering your space. The bright LED display is easy to read even during the day, so you can quickly check your battery voltage, cabin temperature, or the current time while you drive.

Built with durable PP material and designed for a wide voltage range, this tool is a simple upgrade for any vehicle. You can cycle through each function individually or set it to display the information you need most, making it a flexible addition to your car's interior.

Whether you are a daily commuter or an off-road enthusiast, having instant access to your car's electrical system and temperature can help you spot potential issues early. This device offers a straightforward way to stay informed without complicated installation or setup.

Key Features and Benefits

- 3-in-1 functionality that combines a voltmeter, thermometer, and clock, so you get three useful tools in one compact device.

• Bright LED digital display that is clearly visible during the day, making it easy to check information at a glance.

• Wide operating voltage range from DC 5V to 27V, allowing it to work with most standard 12V vehicle electrical systems.

• Customizable viewing options that let you cycle through each function or focus on a single reading, giving you control over what you see.

• Compact frame size of 22x58 mm that fits into a standard dashboard opening, keeping your interior clean and organized.

Who Is This For

- Car owners who want a simple way to monitor their battery voltage and avoid unexpected breakdowns.

• Drivers who need a quick reference for cabin temperature, especially in extreme weather conditions.

• Anyone looking to add a functional clock to their dashboard without taking up extra space.

• DIY enthusiasts who prefer a straightforward, plug-and-play accessory for their vehicle.

Usage Scenario

Mark was driving home late one evening when his dashboard lights flickered. He glanced at his new 3-in-1 display and noticed the voltage reading was dropping below 12V. Thanks to the early warning, he was able to pull into a nearby station and get his alternator checked before the battery died completely. The clock and temperature features also helped him keep track of time and stay comfortable during the wait.

Micro Comparison

Unlike single-purpose gauges that only show one reading, this 3-in-1 display combines voltage, temperature, and time into a single unit. It saves dashboard space and reduces the need for multiple separate devices. The bright digital display also makes it easier to read at a glance compared to traditional analog meters.

Specifications

Material: PP

Display Color: Red / Green / Blue

Voltage: DC 5-27V

Frame Size: 22x58 mm / 0.87x2.28 in

Installation Opening Size: 19.5x56 mm / 0.77x2.20 in

Temperature Display Range: -35 to 120°C / -31 to 248°F

Voltage Display Range: 5-28 V

Power Cord Length: 28 cm / 11.0 in

Please allow 1-3 mm / 0.04-0.12 in difference due to manual measurement.

Package Includes

- 1 x Voltmeter

Why You Will Love It

This device gives you peace of mind by keeping you informed about your car's electrical health and interior temperature. It is a small, affordable addition that can help you catch problems before they become major repairs. The simple design and easy installation make it a practical choice for any driver.

Questions and Answers

Question: Does this device work with a 12V car battery?

Answer: Yes, it works with DC power from 5V to 27V, so it is compatible with standard 12V vehicle electrical systems.

Question: Can I choose which reading to display?

Answer: Yes, you can cycle through each function individually or set it to show the information you prefer.

Question: Is the display bright enough to read in direct sunlight?

Answer: Yes, the LED digital display is designed to be clearly visible even during the day.

Question: What is the installation opening size?

Answer: The required installation opening is about 19.5x56 mm / 0.77x2.20 in.

Question: Does the package include a temperature sensor?

Answer: The temperature display range is built into the device, covering -35 to 120°C / -31 to 248°F.

Keep an eye on your vehicle's electrical health and interior temperature with this 2-in-1 car voltmeter and thermometer. It plugs directly into your cigarette lighter socket for a simple, no-wire setup. The dual LED display shows your battery voltage and cabin temperature at a glance, helping you spot potential issues before they become problems.

This digital monitor works with 12V and 24V systems, making it a versatile tool for cars, trucks, RVs, and boats. The voltmeter measures a wide voltage range, while the thermometer keeps you informed of the temperature inside your vehicle. It is a practical, low-cost addition to any dashboard.

The device features a durable ABS shell and an efficient IC chip for reliable performance. Choose between a Red+Blue or Red+Red display light to match your preference. It is a straightforward tool designed for everyday use and long-lasting service.

Key Features and Benefits

- 2-in-1 functionality that combines a voltmeter and thermometer into one compact device, saving space and giving you two key readings from a single plug-in unit.

• Wide input voltage support for 12-24V systems, so you can use it across different vehicles like cars, trucks, RVs, and boats without needing separate monitors.

• Simple cigarette lighter installation that requires no wiring or tools, making it easy to set up and move between vehicles as needed.

• Clear dual LED display with color options (Red+Blue or Red+Red) that shows voltage and temperature simultaneously, letting you check your vehicle's status at a quick glance.

• Efficient IC chip design that supports accurate readings and long-term reliability, helping you maintain safe driving conditions.

Who Is This For

- Car owners who want a simple way to monitor their battery voltage and cabin temperature without complex installation.

• Truck and RV drivers who operate on 24V systems and need a versatile monitor that works across different vehicle types.

• Boat owners looking for a compact, weather-resistant monitor to keep an eye on their vessel's electrical system and interior environment.

• Anyone who wants a budget-friendly, no-fuss tool to catch battery or temperature issues early and avoid roadside problems.

Usage Scenario

Mark drives an older pickup truck for his weekend camping trips. One morning, he noticed the engine was cranking slower than usual. He plugged this 2-in-1 monitor into his cigarette lighter and saw the voltage was dropping below 12V. The thermometer also showed the cabin was getting hot from the morning sun. He knew it was time to check his battery before it left him stranded. With the monitor, he caught the issue early and replaced the battery before his next trip.

Micro Comparison

Unlike single-function battery testers that only show voltage, this device also tracks interior temperature. Many basic monitors require hardwiring, but this one plugs directly into your cigarette lighter socket. It offers a practical two-in-one solution for daily driving without the complexity of multi-gauge systems.

Specifications

Product model: CS-302

Product weight: 39g

Product size: diameter 4 cm / 1.57 in, length 7.5 cm / 2.95 in

Product material: ABS shell, smart IC chip

Light color: Red+Blue, Red+Red (Optional)

Input voltage: 12-24V

Voltage measurement range: DC 8-36V

Temperature measurement range: -10 to +80°C

Installation method: directly plug into cigarette lighter socket

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x Car Voltmeter Thermometer

Why You Will Love It

You get two essential readings from one simple plug-in device. It helps you stay aware of your battery's condition and your cabin's comfort without any complicated setup. It is a small, affordable tool that gives you peace of mind on every drive.

Questions and Answers

Question: Does this work with a 24V truck system?

Answer: Yes, it supports 12V and 24V input, so it works with cars, trucks, RVs, and boats.

Question: How do I install it?

Answer: Just plug it into your cigarette lighter socket. No tools or wiring are needed.

Question: What do the two colors mean on the display?

Answer: The display shows voltage and temperature simultaneously. You can choose between a Red+Blue or Red+Red light option.

Question: Can I leave it plugged in all the time?

Answer: Yes, it is designed for continuous use. It draws very little power when the vehicle is off.

Question: Does it measure temperature in Fahrenheit?

Answer: It measures in Celsius. The range is -10 to +80°C.

Monitor your car battery and alternator in real time with this compact LCD digital voltmeter. Simply plug it into your 12V cigarette lighter socket to see the voltage reading instantly. No wiring or installation is needed.

This digital gauge displays the voltage of batteries in the car. With high brightness of LED, there is no difficulty in seeing the display. This product is simple enough to use. Just plug it into your lighter and watch your alternator's output from idle to accelerated speed. You could diagnose your car's alternator and battery on the fly.

Stay informed about your vehicle's electrical health with a tool that fits right in your dashboard. The black finish blends in with most car interiors for a clean look. Keep an eye on your battery and alternator performance without any complicated setup.

Key Features and Benefits

- Easy plug-and-play operation that allows you to check voltage by simply inserting it into the 12V port

• High brightness LED display that ensures clear visibility even in bright daylight

• Real-time monitoring capability that helps you diagnose alternator and battery issues while driving

• Compact and lightweight design that fits into any standard cigarette lighter socket without blocking other controls

Who Is This For

- Car owners who want a simple way to monitor battery voltage without installing a permanent gauge

• Truck drivers who need to keep an eye on their vehicle's electrical system during long hauls

• DIY mechanics who prefer a quick diagnostic tool for checking alternator output at idle and acceleration

• Anyone with an older vehicle who wants early warning of potential battery or charging system problems

Usage Scenario

Mark was driving home late one night when his dashboard lights started dimming. He remembered the voltmeter he kept in his glove box. He plugged it into the cigarette lighter and saw the voltage dropping below 12 volts. He knew his alternator was failing and made it to a repair shop just in time. That simple reading saved him from being stranded on the highway.

Micro Comparison

Unlike hardwired voltmeters that require cutting wires and finding a mounting spot, this unit plugs directly into your existing 12V socket. It gives you the same voltage reading without any permanent installation. You can move it between vehicles or store it when not in use.

Specifications

Color: Black

Package Includes

- 1 x voltmeter

Why You Will Love It

You will love the peace of mind that comes from knowing your battery and alternator are working properly. It is a small investment that can prevent unexpected breakdowns. The simple plug-and-use design means you can start monitoring your vehicle's health in seconds.

Questions and Answers

Question: Does this voltmeter work with diesel trucks?

Answer: Yes, it works with any 12V system found in most cars and trucks.

Question: Can I leave it plugged in all the time?

Answer: Yes, you can leave it plugged in permanently. It draws very little power.

Question: How accurate is the voltage reading?

Answer: The measurement allowed error is 1-3 cm. For voltage accuracy, it gives a reliable reading for monitoring purposes.

Question: Will it fit in a tight dashboard area?

Answer: Yes, the compact design fits into most standard cigarette lighter sockets without taking up much space.

Question: Does it work with a 24V system?

Answer: No, this voltmeter is designed for 12V systems only. It will not work with 24V electrical systems.

Replace a faded, cracked, or failing instrument cluster display in select Chevrolet models with this direct-fit LCD screen. Available in two sizes to match different dashboard layouts, this white display uses a metal and glass construction for reliable visibility and long-term durability.

This instrument display is designed specifically for Chevrolet Aveo, Trax, Sonic, and Aiveo models. It provides a clear readout for your vehicle's vital information, helping you monitor speed, fuel levels, and warning indicators without distraction. The direct installation process means you can restore your dashboard's functionality without complex wiring or modifications.

The display features a simple white finish that blends seamlessly with your existing dashboard components. Whether you choose the small 42*115MM size or the large 55*133MM size, each unit is built to match the original factory specifications for your specific Chevrolet model. This makes it an ideal replacement for a damaged or unreadable screen.

Before purchasing, verify your vehicle's part number and compare the dimensions with your current display to ensure a proper fit. This product is not a universal fitment, so confirming compatibility with your specific Chevrolet model is essential for a successful installation.

Key Features and Benefits

- Metal and glass construction that provides durability and reliable performance for long-term use

• Direct installation design that allows you to replace your old display without complicated wiring or professional help

• Available in two sizes (small 42*115MM and large 55*133MM) to fit different Chevrolet dashboard configurations

• White color finish that matches the original factory look of your instrument cluster

• Specifically designed for Chevrolet Aveo, Trax, Sonic, and Aiveo models for guaranteed compatibility

Who Is This For

- Chevrolet owners with a cracked, faded, or non-functioning instrument cluster display

• DIY car enthusiasts who want to restore their dashboard without visiting a mechanic

• Vehicle owners looking for a direct OEM-style replacement rather than a universal or aftermarket modification

• Anyone who needs a clear, readable instrument display for safe driving and accurate vehicle monitoring

Usage Scenario

Mark noticed his 2014 Chevrolet Sonic's instrument display was becoming increasingly difficult to read in direct sunlight. The numbers appeared dim and the screen had developed a small crack near the edge. Instead of taking the car to a dealership for an expensive replacement, he ordered this direct-fit LCD display. After confirming the part number matched his vehicle, he installed the new screen in under 20 minutes using basic tools. Now his dashboard is bright, clear, and fully functional again.

Micro Comparison

Unlike universal OBD2 scanners or aftermarket gauge pods, this instrument display is a direct factory-style replacement for your Chevrolet's existing cluster. It maintains the original look and layout of your dashboard without requiring additional wiring, adapters, or software configuration. This makes it a straightforward and reliable solution for restoring your vehicle's original functionality.

Specifications

Material: Metal + Glass

Color: White

Size: Small 42*115MM, Large 55*133MM

Installation: Direct installation

Fitment: For Chevrolet Aiveo, Chevrolet Trax, Chevrolet Aveo, Chevrolet Sonic

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x Instrument Display

Why You Will Love It

Restoring your car's instrument display gives you back the confidence of knowing exactly what your vehicle is telling you. This replacement screen keeps your dashboard looking clean and original while saving you the cost and hassle of a full cluster replacement. It is a simple, effective fix for a common problem.

Questions and Answers

Question: Will this display fit my 2013 Chevrolet Sonic?

Answer: Yes, this display is designed to fit Chevrolet Sonic models. Check the part number and dimensions to confirm compatibility with your specific year and trim.

Question: Is this a universal display that works with any car?

Answer: No, this is not a universal fitment. It is specifically designed for Chevrolet Aveo, Trax, Sonic, and Aiveo models. Always verify your vehicle's part number before purchasing.

Question: How do I install this instrument display?

Answer: Installation is direct and straightforward. You will need to access your instrument cluster, remove the old display, and install the new one. No complex wiring or modifications are required.

Question: What is the difference between the small and large sizes?

Answer: The small size is 42*115MM and the large size is 55*133MM. Choose the size that matches your vehicle's original instrument cluster display dimensions.

Question: Is the display backlit or does it use the car's existing lighting?

Answer: This display is designed to work with your vehicle's existing instrument cluster lighting system. It will be illuminated by the same backlight as your original display.

Question: Does the display come with a warranty?

Answer: The package includes one instrument display. Please check the seller's return and warranty policy for specific coverage details.

This 2 in 1 digital gauge lets you monitor both water and sewage levels from a single 52mm display. It works with a 0-190 ohm signal range and includes programmable alarm settings to alert you when levels are too low or too high.

Designed for marine boats, trucks, RVs, and generators, this gauge provides clear green LED readouts that are easy to see even in direct sunlight. The dual function design saves dashboard space and simplifies your monitoring setup.

The gauge features a built-in delay of about 20 to 80 seconds. This prevents false readings from liquid splashing inside the tank, giving you more accurate and stable level information.

Installation is straightforward with color-coded wiring and a standard 52mm cutout. The unit works with both 12V and 24V electrical systems and includes reverse polarity protection for added safety.

Key Features and Benefits

- 2 in 1 dual function that monitors water level and sewage level from one gauge, saving panel space and reducing installation work

• Green LED digital display with high resolution that stays readable under bright sunlight, so you can check levels at a glance

• Programmable alarm set below 20% for water level and above 80% for sewage level, giving you clear warnings when action is needed

• Adjustable input signal range from 0-190 ohm with multiple preset options, making it compatible with different tank sensors

• IP66 waterproof rating and anti-fogging performance, ensuring reliable operation in wet and humid environments

• Wide working temperature range from -40 to 85°C, suitable for extreme weather conditions

Who Is This For

- Boat owners who need to monitor fresh water and waste tank levels from a single dashboard gauge

• RV and motorhome users looking for a compact dual-purpose level indicator for holding tanks

• Truck and bus operators who want a reliable water and sewage monitoring system for mobile living spaces

• Generator technicians requiring a durable level gauge that works in both 12V and 24V electrical systems

Usage Scenario

Mark owns a small motorhome and often camps off-grid for several days. He used to check his fresh water and waste tanks separately with two different gauges, which was inconvenient and took up space on his dashboard. After installing this 2 in 1 gauge, he can see both levels on one screen. The alarm reminds him when his fresh water drops below 20% and when his waste tank reaches 80%. This helps him plan his water usage and find a dump station before the tanks become a problem.

Micro Comparison

Unlike basic single-function gauges that only monitor one tank, this 2 in 1 unit displays both water and sewage levels from the same 52mm opening. It also includes programmable alarms and multiple signal range options, giving you more flexibility than standard fixed-range gauges. The green LED display offers better visibility in bright conditions compared to analog needle gauges.

Specifications

- Material: Stainless Steel

• Gauge Diameter: 52 mm / 2.0 in

• Gauge Length: 150 mm / 5.9 in

• Gauge Width: 52 mm / 2.0 in

• Item Weight: 150 g / 5.3 oz

• Sensor Length: 100-600 mm / 3.9-23.6 in

• Signal: 0-190 ohm

• Working Voltage: 12V / 24V

• Working Temperature: -40 to 85°C

• Waterproof Rating: IP66 (gauge)

• Water Level Alarm Set: less than 20%

• Sewage Level Alarm Set: more than 80%

Please allow 1-3 mm / 0.04-0.12 in difference due to manual measurement.

Package Includes

- 1 x Gauge with cable and manual

• Note: Sensor is sold separately. If you select the gauge option, the sensor is not included. If you select the sensor option, the gauge is not included.

Why You Will Love It

You get two essential tank monitors in one compact gauge, which simplifies your dashboard and reduces wiring work. The programmable alarms give you peace of mind by alerting you before your water runs out or your waste tank overflows. The durable stainless steel construction and wide temperature range mean it will perform reliably in tough conditions for years.

Questions and Answers

Question: Does this gauge work with a 24V system?

Answer: Yes, it works with both 12V and 24V electrical systems.

Question: Is the sensor included with the gauge?

Answer: No, the gauge and sensor are sold separately. You need to select the gauge or sensor option when ordering.

Question: What does the alarm do when the water level is too low?

Answer: The gauge triggers an alarm when the water level drops below 20% and when the sewage level goes above 80%.

Question: Can I use this gauge for fuel level monitoring?

Answer: Yes, the gauge can be programmed to work as a fuel gauge by adjusting the signal range setting in the menu.

Question: How long does it take for the reading to update?

Answer: The gauge has a built-in delay of about 20 to 80 seconds to avoid reacting to liquid splashes in the tank.

Question: What size hole do I need to cut for installation?

Answer: You need to cut a 52 mm (2-1/16 inch) hole in the panel.

Question: Can I customize the signal range?

Answer: Yes, you can set the signal range from 000 to 006 using the button menu, which covers options like 0-180 ohm and 10-180 ohm.