Monitor your engine's most important vitals with this complete 52mm 12V car gauge set. It includes a tachometer, turbo boost gauge, oil temperature gauge, water temperature gauge, oil pressure gauge, exhaust temperature gauge, vacuum gauge, voltmeter, and air-fuel ratio gauge. This kit gives you everything you need to keep a close watch on your vehicle's performance and health.

Each gauge features a clear, easy-to-read display with a 52mm dial face that fits standard gauge pods and mounting kits. The set works with 12V gasoline vehicles and includes sensors for water temperature, oil temperature, oil pressure, and exhaust temperature. The boost gauge offers readings in both PSI and Bar units, while the tachometer supports engines with 1 to 8 cylinders. The package includes English installation instructions to help you get everything set up correctly.

Stay informed about your engine's condition at a glance. The water temperature gauge and oil temperature gauge both measure from 40 to 140 degrees Celsius. The oil pressure gauge reads in both PSI and Bar, and the exhaust temperature gauge covers a range of 300 to 1300 degrees Celsius. The voltmeter monitors your electrical system between 8 and 18 volts, and the air-fuel ratio gauge displays readings from 10:1 to 20:1. This set helps you catch potential issues before they become serious problems.

Built with a combination of plastic and metal, these gauges are designed for durability on the road. The 52mm size is a common universal fit for many aftermarket gauge pods and dash kits. Whether you are building a custom dashboard or upgrading your factory gauges, this set provides a comprehensive monitoring solution for your car or truck.

Key Features and Benefits

- Complete 52mm gauge set that includes tachometer, boost, oil temp, water temp, oil pressure, exhaust temp, vacuum, voltmeter, and air-fuel ratio for comprehensive engine monitoring

• Includes sensors for water temperature, oil temperature, oil pressure, and exhaust temperature to provide accurate real-time readings

• Dual-unit boost gauge that displays in both PSI and Bar for flexibility with different vehicle setups

• Tachometer compatible with 1 to 8 cylinder engines to fit a wide range of gasoline vehicles

• Durable plastic and metal construction that withstands the demands of daily driving and performance use

Who Is This For

- Car enthusiasts who want to monitor engine performance and catch problems early

• DIY mechanics installing aftermarket gauges in their own vehicle

• Drivers of turbocharged or high-performance cars who need boost pressure and temperature readings

• Anyone building a custom gauge cluster or replacing old or broken factory gauges

Usage Scenario

Mark had just finished installing a turbo kit on his daily driver. He knew he needed to keep an eye on boost pressure and engine temperatures to avoid damage. He installed this gauge set in a three-pod A-pillar mount. Now he can see his boost level, water temperature, and oil pressure at a glance. On a recent highway pull, he noticed the water temp climbing higher than normal. He pulled over, found a slow coolant leak, and fixed it before it could cause any engine damage. The gauges gave him the warning he needed.

Micro Comparison

Unlike single-function gauges that require buying each unit separately, this set gives you nine different gauges in one package. It includes the sensors you need for temperature and pressure readings, so you do not have to source them separately. This all-in-one approach saves you time and ensures compatibility across the whole system.

Specifications

- Gauge diameter: 52mm / 2.0 in

• Gauge length: 57mm / 2.2 in

• Gauge width: 50mm / 1.97 in

• Item weight: 0.3 kg / 10.6 oz

• Material: Plastic and metal

• Voltage: 12V

• Compatible with: 12V gasoline vehicles, 1 to 8 cylinder engines

• Tachometer range: 0 to 10,000 RPM

• Boost gauge PSI range: -30 to 35 PSI

• Boost gauge Bar range: -1 to 2 Bar

• Vacuum gauge range: -30 to 0 In.hg

• Water temperature gauge range: 40 to 140 degrees Celsius

• Oil temperature gauge range: 40 to 140 degrees Celsius

• Oil pressure gauge PSI range: 0 to 100 PSI

• Oil pressure gauge Bar range: 0 to 7 Bar

• Voltmeter range: 8 to 18V

• Air-fuel ratio gauge range: 10:1 to 20:1

• Exhaust temperature gauge range: 300 to 1300 degrees Celsius (3 to 13 x 100 degrees Celsius)

• Sensor thread size: 1/8 ZG

• Note: Air-fuel ratio gauge does not include a sensor. It is suitable for narrow band oxygen sensors only. Note: After receiving the gauge, the pointer may not display 0. This is normal. It will work correctly when powered on.

Package Includes

- 1 x Tachometer

• 1 x Boost Gauge PSI or Boost Gauge Bar (unit option selected at purchase)

• 1 x Vacuum Gauge

• 1 x Water Temperature Gauge with sensor

• 1 x Oil Temperature Gauge with sensor

• 1 x Oil Pressure Gauge PSI or Oil Pressure Gauge Bar (unit option selected at purchase)

• 1 x Voltmeter

• 1 x Air-Fuel Ratio Gauge

• 1 x Exhaust Temperature Gauge with sensor

• 1 x English installation instruction manual

Why You Will Love It

This gauge set puts all the critical engine data in one place. You get nine gauges that cover boost, temperature, pressure, RPM, voltage, and air-fuel ratio. It helps you drive with confidence, knowing you can spot any change in your engine's condition immediately. For anyone serious about their car's performance and reliability, this kit is a practical and complete solution.

Questions and Answers

Question: Will this gauge set work on a diesel engine?

Answer: This set is designed for 12V gasoline vehicles. It is not recommended for diesel engines.

Question: Does the air-fuel ratio gauge come with an oxygen sensor?

Answer: No, the air-fuel ratio gauge does not include a sensor. You need to purchase one separately. It works with narrow band oxygen sensors only.

Question: What size mounting hole do I need for these gauges?

Answer: These gauges have a 52mm / 2.0 inch diameter. You need a mounting hole that fits a standard 52mm gauge.

Question: Can I use the boost gauge with a turbocharged engine?

Answer: Yes. The PSI version of the boost gauge has turbo functionality. The Bar version does not include turbo function.

Question: Do the temperature sensors come with the gauges?

Answer: Yes. The water temperature gauge, oil temperature gauge, and exhaust temperature gauge each include their own sensor. The oil pressure gauge also includes a sensor.

Monitor your engine's health with a single, compact gauge. This 2-in-1 meter displays both water temperature and battery voltage, helping you catch overheating or electrical issues before they become major problems. It works with both 12V and 24V systems, making it a versatile tool for cars, trucks, and SUVs.

The gauge comes with a 10mm water temperature sensor for easy installation. The clear LCD screen shows both readings at a glance, so you can keep your eyes on the road while staying informed about your vehicle's vital signs. It is a practical upgrade for any driver who values reliability and peace of mind.

Built for durability, this meter is designed to withstand the conditions under your dashboard. It gives you real-time data without taking up much space. Whether you are maintaining a daily driver or a project car, this gauge provides the essential information you need.

This device simplifies your dashboard by combining two critical functions into one unit. It reduces clutter and provides a cleaner, more organized look while delivering the performance data that matters most.

Key Features and Benefits

- 2-in-1 LCD display that shows water temperature and battery voltage simultaneously for quick and easy monitoring

• Compatible with 12V and 24V electrical systems to fit a wide range of vehicles

• Includes a 10mm water temperature sensor for straightforward installation

• Compact design that saves dashboard space and reduces wire clutter

• Real-time readings that help you spot potential problems early

Who Is This For

- Car owners who want to keep an eye on engine temperature and battery health

• DIY mechanics installing aftermarket gauges in project cars or restorations

• Truck and SUV drivers who need reliable monitoring for long trips or heavy loads

• Anyone replacing a failing or inaccurate factory temperature or voltage gauge

Usage Scenario

Mark drives a 2005 pickup truck he uses for weekend camping trips. After his old temperature gauge stopped working, he installed this 2-in-1 meter. Now, while towing a small trailer up a steep mountain road, he notices the water temp climbing. He pulls over safely, lets the engine cool, and avoids a costly repair. The voltmeter also helped him catch a dying battery before it left him stranded.

Micro Comparison

Unlike separate gauges that take up multiple spots on your dash, this 2-in-1 unit combines both readings in one display. It simplifies your setup and reduces wiring work. It also works with both 12V and 24V systems, giving you more flexibility than many single-voltage gauges.

Specifications

- Type: 2-in-1 LCD water temperature and voltage meter

• Sensor: 10mm water temperature sensor included

• Voltage Compatibility: 12V and 24V

Package Includes

- 1 x Car LCD Water Temp Meter + Voltmeter Gauge

• 1 x 10mm Water Temperature Sensor

Why You Will Love It

You will love the convenience of having two critical readings in one gauge. It simplifies your dashboard, saves you installation time, and gives you reliable data every time you drive. It is a smart, practical tool that helps you protect your engine and your battery.

Questions and Answers

Question: Does this gauge work with a 12V car battery?

Answer: Yes, it is compatible with both 12V and 24V systems.

Question: What size is the temperature sensor?

Answer: The sensor has a 10mm thread size.

Question: Can I install this myself?

Answer: Yes, if you have basic wiring knowledge and the right tools, installation is straightforward.

Question: Does the display show both readings at the same time?

Answer: Yes, the LCD screen shows water temperature and voltage simultaneously.

Question: Is this gauge suitable for a diesel truck?

Answer: Yes, as long as your vehicle uses a 12V or 24V electrical system, it will work.

The A590 Head Up Display gives you a clear digital view of your car's vital data without taking your eyes off the road. It combines OBD2 and GPS tracking to show RPM, voltage, oil pressure, and turbo boost on a full LCD screen.

This digital gauge replaces traditional mechanical instruments with a modern LCD display. You can place it freely on your car's central console for easy reading. The system features a driving score function that records your trip behavior and provides alerts, helping you build safer driving habits.

The A590 offers 9 different theme interfaces so you can customize the look to match your style. It is compatible with most vehicles from 2008 onwards. Note that the driving score feature works with petrol cars and is not supported by trams.

Switching from analog gauges to a digital display makes your car data more intuitive and easier to read at a glance. The A590 helps you stay informed while keeping your focus on the road ahead.

Key Features and Benefits

- Full LCD display that shows clear and intuitive car data for quick reading

• OBD2 and GPS dual positioning for accurate speed and location tracking

• Driving score system that records trip behavior and scores your driving for safer habits

• 9 theme interfaces that let you personalize the display look

• Pluggable design that allows flexible placement on your car's central console

• Compatibility with most vehicles from 2008 onwards for broad use

Who Is This For

- Car enthusiasts who want a modern digital upgrade from traditional mechanical gauges

• Drivers who want to monitor real-time engine data like RPM, voltage, and turbo pressure

• Safety-conscious drivers who want driving behavior feedback to improve their habits

• Owners of petrol cars from 2008 and newer looking for an easy-to-install HUD system

Usage Scenario

Mike installed the A590 in his 2010 sedan to replace his old analog gauges. During his daily commute, he noticed the digital display made it much easier to check his RPM and speed without looking down. The driving score alerted him when he accelerated too quickly, helping him adjust his driving style. After a week, his score improved and he felt more in control behind the wheel.

Micro Comparison

Traditional mechanical gauges can be hard to read quickly and take up dashboard space. The A590 uses a full LCD screen that displays multiple data points clearly in one place. Its driving score feature adds a layer of feedback that standard HUDs do not offer, making it a practical upgrade for drivers who want both information and safety insights.

Specifications

- Material: ABS + Metal

• Color: As Shown

• Compatibility: Suitable for most vehicles from 2008 onwards

• Note: Driving score feature is not supported by trams; only supports petrol cars

Package Includes

- 1 x Host

• 1 x 1.8m Connecting Line

• 2 x Double-Sided Tape

• 1 x English Manual

• 1 x Bracket

• 1 x Crowbar

Why You Will Love It

You will love how the A590 brings your car's dashboard into the digital age. The clear LCD display and driving score system give you useful feedback every time you drive. It is a simple upgrade that makes your daily commute safer and more engaging.

Questions and Answers

Question: Will this work with my 2015 diesel car?

Answer: The A590 is designed for petrol cars. The driving score feature does not support diesel vehicles or trams.

Question: Can I install this myself?

Answer: Yes, the package includes a bracket, double-sided tape, and a crowbar for easy installation. The English manual provides step-by-step guidance.

Question: Does it show turbo boost pressure?

Answer: Yes, the A590 displays turbo boost pressure along with RPM, voltage, and oil pressure.

Question: How many display themes are available?

Answer: The A590 comes with 9 different theme interfaces that you can switch between.

Question: Is the display bright enough for daytime driving?

Answer: The full LCD screen is designed to be clear and readable in various lighting conditions, including daytime driving.

Monitor seven critical engine parameters with one compact 52mm gauge set. This digital display combines a tachometer, boost gauge, water temperature, oil temperature, oil pressure, voltmeter, and air-fuel ratio reader into a single dashboard-ready unit. It gives you real-time data to keep your engine running safely and efficiently.

Each gauge uses a bright blue LED readout with a red warning light that alerts you when a parameter goes outside the safe range. The 52mm diameter fits standard gauge pods and panels, making installation straightforward for most 12V gasoline vehicles. The ABS plastic housing with an aluminum ring provides durability without adding extra weight.

Whether you are tuning for performance or just want to keep a close eye on your engine health, this gauge set gives you the information you need at a glance. The tachometer reads up to 9999 RPM, the boost gauge measures from -14 to 29 PSI, and the temperature gauges cover 40 to 150 degrees Celsius. It is a practical upgrade for any car enthusiast who values precision and reliability.

Key Features and Benefits

- 7 gauge functions in one unit that let you monitor boost, temperature, pressure, voltage, RPM, and air-fuel ratio without buying separate gauges

• Blue LED digital display with red warning light that makes critical readings easy to see even in low light

• 52mm diameter housing that fits standard gauge pods and panels for a clean dashboard installation

• ABS plastic case with aluminum rim that resists wear and keeps the gauge lightweight

• 12V DC power compatibility that works with most gasoline car electrical systems

• Red warning point at 10V for the voltmeter that alerts you to low battery voltage

• Warning light above 100 degrees Celsius on the water temp gauge that helps prevent overheating

• Tachometer warning light above 5000 RPM that helps you avoid over-revving the engine

Who Is This For

- Car enthusiasts who want a complete engine monitoring solution in one compact gauge

• DIY mechanics installing a custom dashboard or upgrading from analog gauges to digital readouts

• Performance tuners who need real-time data on boost, air-fuel ratio, and engine temperature during tuning sessions

• Owners of 12V gasoline vehicles with 4, 6, or 8 cylinders looking for an affordable gauge upgrade

Usage Scenario

Mark just finished installing a turbo kit on his daily driver. He wanted to keep an eye on boost pressure, oil temperature, and engine RPM all at once without cluttering his dashboard with multiple separate gauges. After mounting this 52mm gauge set in his gauge pod, he took the car for a test drive. The blue LED display was easy to read even in direct sunlight, and the red warning light on the water temp gauge caught his attention when the engine started running warmer than usual during a long uphill climb. He was able to pull over and let the engine cool before any damage occurred. Now he drives with confidence knowing he has all the vital information right in front of him.

Micro Comparison

Unlike single-function gauges that require multiple pods and wiring harnesses, this 7-in-1 unit consolidates all essential readings into one display. It saves dashboard space and simplifies installation. While some digital gauge sets only show basic data, this one includes both boost and vacuum readings plus an air-fuel ratio gauge, giving you more insight into engine performance without needing extra sensors or adapters.

Specifications

Gauge diameter: 52mm / 2 inches

Housing material: ABS plastic with aluminum rim

Display type: Digital LED, blue and red

Power: 12V DC, max 0.3A

Tachometer range: 0-9999 RPM

Tachometer warning: above 5000 RPM

Boost gauge range (PSI): -14 to 29 PSI

Boost gauge range (BAR): -1 to 2 BAR

Water temp range: 40-150 degrees Celsius

Oil temp range: 40-150 degrees Celsius

Oil press range: 0-150 PSI

Voltmeter range: 8-18V

Voltmeter warning point: 10V

Water temp warning: above 100 degrees Celsius

Air-fuel ratio gauge range: 0-120 PSI

Sensor thread: NPT 1/8 inch

Fitment: 12V 4/6/8 cylinder gasoline cars

Package Includes

- 1 x Digital LED Tachometer

• 1 x Boost Gauge (PSI)

• 1 x Boost Gauge (BAR)

• 1 x Water Temperature Gauge

• 1 x Oil Temperature Gauge

• 1 x Oil Pressure Gauge

• 1 x Voltmeter

• 1 x Air/Fuel Ratio Gauge

• 1 x Boost Sensor

• 1 x Water Temp Sensor (NPT 1/8)

• 1 x Oil Temp Sensor (NPT 1/8)

• 1 x Oil Press Sensor (NPT 1/8)

• 1 x PVC Hose (6 feet)

• 1 x T-Fitting

• 1 x Air Filter

• 1 x Mounting Bracket

• 1 x Mounting Screws Kit

• 1 x Screw Knob

• 1 x Cable

• 1 x English Installation Instruction

Why You Will Love It

You get seven essential gauges in one compact unit that fits right into your dashboard without taking up extra space. The bright blue display and red warning lights give you instant feedback on engine health, so you can drive with more confidence and catch issues early. It is a practical, cost-effective way to upgrade your car monitoring system without the complexity of multiple separate gauges.

Questions and Answers

Question: What vehicles is this gauge set compatible with?

Answer: It fits 12V gasoline cars with 4, 6, or 8 cylinders. It is not designed for diesel engines or 24V electrical systems.

Question: Does this gauge set come with all the sensors and wiring?

Answer: Yes, each gauge function includes its corresponding sensor, and the package comes with a cable, mounting hardware, and an English instruction manual.

Question: Can I install this gauge set myself?

Answer: Yes, if you have basic knowledge of car electrical systems and gauge installation. The package includes an English instruction manual to guide you through the wiring and mounting process.

Question: What does the red warning light mean?

Answer: The red warning light activates when a reading goes outside the safe range. For example, the voltmeter warns at 10V, the water temp gauge warns above 100 degrees Celsius, and the tachometer warns above 5000 RPM.

Question: Is the display bright enough to read in direct sunlight?

Answer: Yes, the blue LED digital display is designed to be visible in various lighting conditions, including direct sunlight, so you can read your gauges clearly while driving.

Question: What thread size are the sensors?

Answer: All sensors use NPT 1/8 inch thread, which is a standard size for automotive gauge sensors.

Question: Does this gauge set include a voltmeter?

Answer: Yes, the voltmeter function measures voltage from 8 to 18V with a red warning point at 10V to alert you of low battery voltage.

Monitor your engine's vital signs with a single, easy-to-read display. This 5-inch LCD gauge combines six essential functions into one compact unit, giving you real-time data on your vehicle's performance.

This multi-function gauge is designed to help you keep an eye on your engine's health. It measures RPM, water temperature, oil temperature, oil pressure, and battery voltage, and it also includes a 24-hour clock. The large 5-inch LCD screen makes it easy to read all the information at a glance, so you can spot potential issues before they become major problems.

The gauge uses high-quality copper contact points for reliable conductivity and long-lasting performance. It works with standard 12V vehicle electrical systems and fits a variety of cars and motorcycles. The black plastic housing gives it a clean, functional look that blends in with most dashboards.

Installation is straightforward, and the package includes the main gauge unit along with the necessary sensors and wiring. Whether you are building a custom dash or upgrading your factory gauges, this 6-in-1 unit provides a complete monitoring solution in one convenient package.

Key Features and Benefits

- 6-in-1 functionality combines Voltmeter, Clock, RPM, Water Temp, Oil Temp, and Oil Pressure into one gauge, reducing dashboard clutter.

• 5-inch LCD screen provides clear, easy-to-read data at a glance, so you can monitor multiple systems without distraction.

• High-quality copper contact points ensure reliable conductivity and resist aging for long-term durability.

• Works with standard 12V vehicle electrical systems, making it compatible with most cars and motorcycles.

• Quick and accurate response to sensor inputs gives you real-time engine data you can trust.

Who Is This For

- Car enthusiasts who want to monitor engine vitals like RPM, oil pressure, and water temperature from a single display.

• Motorcycle owners looking to add a compact, multi-function gauge to their dashboard or handlebar setup.

• DIY mechanics and custom car builders who need a complete gauge package for a modified or project vehicle.

• Drivers who prefer a clean, all-in-one solution over multiple individual gauges spread across the dash.

Usage Scenario

Mike had just finished rebuilding the engine in his classic coupe and needed a reliable way to keep an eye on its performance. Instead of drilling holes for separate gauges, he installed this 6-in-1 unit in his custom dash. Now he can watch his RPM during hard acceleration, check oil pressure at idle, and see water temp climbing in stop-and-go traffic, all from one screen. It keeps his dash clean and his mind at ease.

Micro Comparison

Individual mechanical gauges can take up a lot of dashboard space and require separate wiring for each unit. This 6-in-1 LCD gauge combines all the essential readouts into one compact display, simplifying installation and reducing clutter. It gives you the same critical engine data in a single, easy-to-read package that fits neatly into your setup.

Specifications

- Display: 5 inch LCD

• Voltage: 12V (operating range 8-18V)

• RPM Range: 0-8000

• Oil Pressure Range: 0-100 PSI

• Water Temperature Range: 40-120

• Oil Temperature Range: 40-150

• Clock: 24H

• Functions: Voltmeter, Clock, RPM, Water Temp, Oil Temp, Oil Pressure

• Material: Plastic shell with metal components

• Color: Black shell

• Item Dimensions: 143mm x 77mm x 0mm (Length x Width x Height)

• Item Weight: 0.6 kg

Package Includes

- 1x 6 in 1 multiple function Auto Car Gauge

Why You Will Love It

You will love the convenience of having six critical engine readouts on one large, easy-to-read screen. It simplifies your dashboard and gives you peace of mind knowing you can monitor your engine's health at a glance. This gauge helps you drive with confidence, whether you are on a daily commute or a weekend road trip.

Questions and Answers

Question: Is this gauge compatible with my 12V car?

Answer: Yes, it is designed for standard 12V vehicle electrical systems and works with most cars and motorcycles.

Question: What does the 6-in-1 function include?

Answer: It includes a Voltmeter, Clock, RPM (tachometer), Water Temperature, Oil Temperature, and Oil Pressure gauge.

Question: What is the screen size?

Answer: The screen is a 5-inch LCD display.

Question: Does this gauge come with sensors?

Answer: The package includes the main gauge unit. Please check the package list for specific sensor details.

Question: Can I use this on a motorcycle?

Answer: Yes, it is suitable for both cars and motorcycles as long as the vehicle has a 12V system.

Keep your engine running at its best with this 62mm GReddi LCD digital display car gauge. It monitors oil pressure, oil temperature, water temperature, voltage, and boost levels all in one compact unit. Designed for car enthusiasts who want real-time data at a glance, this gauge helps you spot issues before they become major problems.

This gauge features a 2.5-inch (62mm) black face with a 270-degree viewing angle, making it easy to read from the driver's seat. The LCD display offers 7 switchable light colors, so you can match the look of your dashboard or interior. It is built with durable ABS plastic and works with all 4, 6, and 8 cylinder engine cars.

The gauge comes with a holder, sensor, and wiring for straightforward installation. You can connect multiple instruments in series for a complete monitoring setup. It uses a simple 4-pin power connection and a sensor signal line for reliable data transmission. Installation precautions are included to help you get it set up correctly the first time.

Whether you are tuning your engine, towing a load, or just keeping an eye on daily performance, this gauge gives you the information you need. The switchable backlight and compact size make it a practical addition to any vehicle.

Key Features and Benefits

- Monitors oil pressure, oil temperature, water temperature, voltage, and boost levels in one gauge that gives you a complete view of engine health

• 7 switchable light colors that let you match the gauge display to your dashboard or personal style

• 270-degree viewing angle that makes the display easy to read from the driver's seat without straining

• Compact 62mm / 2.5 inch size that fits standard gauge pods and dash openings

• ABS plastic construction that is lightweight and durable for long-term use in your vehicle

• Includes gauge holder, sensor, and wiring that simplifies the installation process

Who Is This For

- Car enthusiasts who want to monitor multiple engine parameters with a single gauge

• DIY mechanics installing aftermarket gauges in their own vehicles

• Drivers of 4, 6, or 8 cylinder cars looking for real-time performance data

• Anyone upgrading their dashboard with a modern, multi-function digital display

Usage Scenario

Mark had just finished a long highway drive when he noticed his engine temperature creeping up. He glanced at his new GReddi gauge and saw the water temperature reading was higher than normal. The oil pressure reading confirmed something was off. He pulled over, checked the coolant level, and avoided a potential overheating issue. Now he checks the gauge every time he drives, especially on long trips or when towing his boat.

Micro Comparison

Unlike single-function gauges that only show one reading, this GReddi unit combines five key measurements in one display. It saves dashboard space and reduces wiring complexity. The 7-color backlight gives you customization options that many basic gauges do not offer.

Specifications

Size: 62 mm / 2.5 in

Material: ABS + LED

Viewing angle: 270 degrees

Light color: 7 colors (switchable)

Style: Black face

Placement on vehicle: Front

Interchange part number: DF61204

Manufacturer part number: DF61204

Item weight: 0.35 kg / 12.3 oz

Package Includes

- 1x GReddi LCD digital display car gauge

• 1x Gauge holder

• 1x Sensor

• 1x Wiring harness

Why You Will Love It

You get five essential engine readings in one clean display, which means less clutter on your dashboard. The switchable backlight lets you personalize the look to match your interior. It is a practical upgrade that helps you drive with more confidence and awareness of what is happening under the hood.

Questions and Answers

Question: Can this gauge be installed in any car?

Answer: It is suitable for all 4, 6, and 8 cylinder engine cars. You will need to connect the power and sensor wires according to the included instructions.

Question: What colors does the backlight offer?

Answer: The gauge has 7 switchable light colors so you can choose the one that fits your dashboard style.

Question: Does the gauge come with everything needed for installation?

Answer: Yes, it includes the gauge, holder, sensor, and wiring harness. You will need basic tools for installation.

Question: What is the size of this gauge?

Answer: The gauge is 62 mm or 2.5 inches in diameter, which is a standard size for most gauge pods.

Question: Can I connect multiple gauges together?

Answer: Yes, this gauge can be connected in series with multiple instruments for a complete monitoring setup.

Keep an eye on your engine's vital signs with this 3 in 1 car LCD digital gauge. It combines a voltmeter, oil pressure gauge, and water temperature gauge into one compact unit. Designed for 12-24V vehicles, it gives you clear, real-time data to help you drive with more confidence.

This multi-functional gauge replaces the need for three separate instruments. Its digital display makes readings easy to see at a glance. Whether you drive a car, truck, or motorcycle, this universal meter helps you monitor key engine parameters without cluttering your dashboard.

Installation is straightforward, and the gauge is built to handle tough conditions. It features stable performance, low power consumption, and resistance to vibration and bumps. With a measurement speed of 3-5 seconds, you get quick updates on your engine's status.

Key Features and Benefits

- 3-in-1 digital display that shows voltage, oil pressure, and water temperature in one unit for a cleaner dashboard setup.

• Wide 9V-36V power supply range that works with most 12V and 24V vehicle electrical systems.

• Anti-vibration and anti-bump construction that keeps the gauge reliable on rough roads or off-road terrain.

• Quick 3-5 second measurement speed that gives you fast updates when you start your engine or notice a change.

• Low power consumption design that puts minimal strain on your vehicle's battery over long periods of use.

Who Is This For

- Car owners who want a simple way to track engine health without installing multiple separate gauges.

• Truck drivers who need reliable readings for voltage, oil pressure, and coolant temperature during long hauls.

• Motorcycle riders looking for a compact, weather-resistant gauge to monitor engine vitals on the go.

• DIY mechanics and hobbyists who prefer a universal gauge that fits different vehicles and projects.

Usage Scenario

Mark drives an older pickup truck he uses for weekend camping trips. He noticed the dashboard warning lights were vague and wanted more specific data. After installing this 3-in-1 gauge, he can now see his battery voltage at startup, monitor oil pressure on steep climbs, and check water temperature during long summer drives. The digital display is easy to read even in bright sunlight, and the compact size fits neatly next to his steering column.

Micro Comparison

Unlike analog gauges that can be hard to read at a glance, this digital display shows precise numbers clearly. It combines three functions into one unit, saving dashboard space compared to buying three separate meters. The 12-24V compatibility makes it more versatile than gauges limited to a single voltage system.

Specifications

- Material: Plastic Shell

• Product Size: 55mm x 99mm x 14mm / 2.2 x 3.9 x 0.6 in

• Power Cable Length: approx. 50 cm / 19.7 in

• Power Supply: DC 9V - 36V

• Pressure Measuring Range: 0.00 - 1.00 Mpa

• Accuracy: +/-1%

• Measurement Speed: 3-5 seconds

• Water Temperature Range: -10°C to 110°C / 14°F to 230°F

• Ambient Temperature: -10°C to 50°C / 14°F to 122°F

• Temperature Sensor Thread: M10

• Oil Pressure Sensor Thread: 1/8 NPT

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x Gauge

• 1 x Set Cable

• 1 x Temperature Sensor

• 1 x Oil Pressure Sensor

Why You Will Love It

You get three essential readings in one compact gauge, which simplifies your dashboard and saves installation time. The digital display removes guesswork, giving you confidence that your engine is running within safe ranges. It is a practical upgrade for anyone who values knowing exactly what is happening under the hood.

Questions and Answers

Question: Will this gauge work on a 12V car?

Answer: Yes, it works on both 12V and 24V systems, including most cars, trucks, and motorcycles.

Question: How do I install the oil pressure sensor?

Answer: The sensor uses a standard 1/8 NPT thread. You can install it into an available port on your engine block or use an adapter if needed.

Question: Does the gauge come with a wiring harness?

Answer: Yes, the package includes a set of cables with clearly marked red and black wires for power connections.

Question: Can I use this gauge on a motorcycle?

Answer: Yes, it is suitable for motorcycles as long as your electrical system is within the 9V-36V range.

Question: What does the alarm do on this gauge?

Answer: The display flashes an alarm when voltage drops below 10V, rises above 31V, or falls between 16-20V, alerting you to potential issues.

Monitor your vehicle's vital performance metrics in real time with the Dynoracing 2 inch 52mm gauge. This multi-function gauge combines a bright 7 color LED backlight with a clear dual display, giving you a complete view of boost, water temperature, oil temperature, oil pressure, voltage, air fuel ratio, EGT, and tachometer. It is built for the driver who wants to keep a close eye on engine health and turbo performance.

This gauge uses a high-speed stepper motor for a quick and accurate response, so you see changes as they happen. The 7 color LED backlight is adjustable, letting you match the gauge lighting to your dashboard or personal style. A button on the lens lets you switch colors easily without any extra wiring. The dual display shows both analog and digital readings, making it simple to read at a glance.

The gauge comes with a clear installation manual to help you get it set up. It is designed for universal fitment on any 12V vehicle, including 4, 6, and 8 cylinder gasoline cars. The thread size for the temperature sensors and oil pressure sensor is 1/8 NPT, which is a common standard for aftermarket gauges. This gauge is a practical upgrade for anyone who wants to keep track of engine conditions and avoid potential problems.

If you have a performance car, a turbocharged engine, or just want to monitor your vehicle's systems more closely, this gauge set gives you the data you need. It is also a great choice for track days, long road trips, or daily driving where you want to stay informed about your engine's status. The combination of multiple readings in one unit saves space on your dashboard and reduces clutter.

Key Features and Benefits

- High-speed stepper motor that provides a quick and accurate response to changing engine conditions

• Adjustable 7 color LED backlight that lets you match the gauge to your dashboard or personal preference

• Dual display with both analog pointer and digital readout for easy reading at a glance

• Button on the lens to switch backlight colors without extra wiring or controller

• Universal fitment for all 12V vehicles, including 4, 6, and 8 cylinder gasoline engines

• 1/8 NPT thread size for temperature and oil pressure sensors for easy installation with common aftermarket parts

Who Is This For

- Car enthusiasts who want to monitor boost, oil pressure, and temperature in turbocharged or high-performance engines

• DIY mechanics who prefer a multi-function gauge that combines several readings into one unit

• Drivers who want a clear and customizable dashboard display that works with their existing 12V electrical system

• Track day participants who need real-time data on engine vitals to prevent overheating or oil pressure drops

Usage Scenario

Mike had just finished installing a turbo kit on his project car. He needed a way to keep an eye on boost pressure and oil temperature without adding a separate gauge for each reading. He installed this Dynoracing gauge and set the backlight to a cool blue to match his interior. During a test drive, he noticed the digital display showing a steady boost curve and the oil temperature staying within a safe range. The quick response of the stepper motor let him see changes instantly, giving him confidence that his engine was running properly.

Micro Comparison

Many single-function gauges only show one reading, which means you need multiple gauges to monitor boost, oil pressure, and temperature. This Dynoracing gauge combines several readings into one unit with a dual display, saving dashboard space and reducing wiring. The adjustable 7 color LED backlight also gives you more customization than standard single-color gauges, making it easier to match your interior lighting.

Specifications

Material: ABS + glass + metal

Size: 52 mm / 2.0 in diameter

Weight: 0.4 kg / 14.1 oz

Sensor thread size: 1/8 NPT

Voltage: 12V DC

Fitment: Universal for 12V gasoline vehicles (4, 6, 8 cylinder)

Package Includes

- 1 x Boost gauge (PSI or BAR)

• 1 x Water temperature gauge

• 1 x Oil temperature gauge

• 1 x Oil pressure gauge

• 1 x Voltmeter

• 1 x Tachometer

• 1 x Installation manual

Why You Will Love It

You will appreciate having all your engine data in one clear, customizable display. The dual analog and digital readout makes it easy to see both the trend and the exact number. The ability to change the backlight color means the gauge always fits your car's style, day or night.

Questions and Answers

Question: Is this gauge compatible with a diesel engine?

Answer: This gauge is designed for 12V gasoline vehicles. It is not recommended for diesel engines without verifying compatibility with your specific setup.

Question: Does the gauge come with all the sensors and wiring?

Answer: The package includes the gauge, sensors for water temperature, oil temperature, oil pressure, and the needed wiring. The tachometer and boost gauge use separate sensors that are included.

Question: Can I change the backlight color while driving?

Answer: Yes, there is a button on the lens that lets you switch between the 7 colors easily while driving.

Question: Will this work on a 24V truck?

Answer: No, this gauge is designed for 12V systems only. Using it on a 24V system may damage the gauge.

Question: What does the dual display show at the same time?

Answer: The gauge shows both an analog pointer reading and a digital numeric display for the same measurement, so you can see the needle position and the exact number simultaneously.

Keep your engine running smoothly with this 3 in 1 gauge kit. It combines oil pressure, water temperature, and a voltmeter into one compact cluster. This kit gives you real-time engine data so you can spot problems early and avoid costly repairs.

This triple gauge set is built for drivers who want to monitor their engine's health at a glance. The mechanical oil pressure gauge reads from 0 to 80 PSI, the water temperature gauge covers 100 to 250 degrees Fahrenheit, and the voltmeter monitors your electrical system from 8 to 16 volts. Each gauge features a white face dial with a pointer and a chrome bezel for a clean, classic look that fits well in most dashboards.

Installation is straightforward with the included sensors and hardware. The 52mm diameter (2 inches) gauges are a common size for aftermarket pods or direct dashboard mounting. The metal construction feels solid and durable, designed to handle the vibrations and heat under your dash. Whether you are building a hot rod, restoring a classic, or upgrading your daily driver, this kit provides the essential readings you need to drive with confidence.

This kit includes everything you need to get started: the triple meter cluster, oil pressure sensor, water temperature sensor, and mounting hardware. Professional installation is recommended to ensure accurate readings and a secure fit. Check your existing gauge openings to confirm the 52mm size before ordering.

Key Features and Benefits

- Three-in-one design that combines oil pressure, water temperature, and voltmeter gauges to save dashboard space and simplify monitoring

• Mechanical sending units that provide direct, reliable readings without electronic interference

• White face dials with chrome bezels that offer clear visibility and a classic automotive style

• 52mm diameter size that fits standard gauge pods and aftermarket dashboard openings

• Metal construction that holds up to engine heat and vibration for long-lasting performance

Who Is This For

- Car enthusiasts building or restoring classic cars, hot rods, and muscle cars who need essential engine monitoring

• DIY mechanics upgrading their vehicle's dashboard with reliable mechanical gauges

• Drivers who want to keep an eye on oil pressure, coolant temperature, and battery voltage in one convenient cluster

• Anyone replacing a broken or outdated gauge set with a matching chrome-trimmed kit

Usage Scenario

Mark had just finished rebuilding the engine on his 1972 Chevelle. He needed a way to monitor oil pressure and water temperature without cluttering his dashboard with separate gauges. He installed this triple gauge kit in a standard 52mm pod under the dash. Now, during his test drives, he can see his oil pressure stay steady at 45 PSI, watch the water temp climb to 190 degrees, and confirm his alternator is charging at 14 volts. The chrome bezel matches his interior trim, and the white dials are easy to read even in direct sunlight.

Micro Comparison

Unlike digital gauge sets that require wiring and electronic sensors, this kit uses mechanical sending units for direct readings. This makes it a good choice for older vehicles where electrical systems may be less reliable. The 52mm size is a common standard, so it fits most aftermarket gauge pods and dash openings without modification. While some kits only include one or two gauges, this set gives you three essential readings in one cluster.

Specifications

Material: Metal

Color: Chrome

Gauge Diameter: 52mm / 2 in

Package Dimensions: 18 x 6.5 x 5.5 cm / 7.1 x 2.6 x 2.2 in

Item Weight: 0.55 kg / 19.4 oz

Sending Unit: Mechanical

Oil Pressure Range: 0-80 PSI

Water Temperature Range: 100-250 degrees Fahrenheit

Voltmeter Range: 8-16V

Display: White face dial with pointer and chrome bezel

Package Includes

- Triple meter instrument cluster kit x1

Why You Will Love It

You get three essential gauges in one neat package that saves space and looks great on your dashboard. The mechanical design gives you direct, dependable readings without worrying about electronic failures. It is a practical upgrade that helps you keep your engine healthy and your mind at ease.

Questions and Answers

Question: What size are these gauges?

Answer: Each gauge has a 52mm diameter, which is about 2 inches. This is a standard size that fits most aftermarket gauge pods and dashboard openings.

Question: Does this kit include sensors?

Answer: Yes, the kit comes with the oil pressure sensor and water temperature sensor needed for installation.

Question: What voltage does the voltmeter measure?

Answer: The voltmeter reads from 8 to 16 volts, which covers the normal operating range of most 12V automotive electrical systems.

Question: Are these gauges mechanical or electronic?

Answer: They are mechanical gauges. The oil pressure and water temperature gauges use mechanical sending units for direct readings.

Question: Can I install these in a classic car with a 12V system?

Answer: Yes, these gauges are designed for 12V systems and are a popular choice for classic cars, hot rods, and muscle cars.

Question: Do you need to modify the dashboard to fit these gauges?

Answer: If your dashboard already has a 52mm opening or a standard gauge pod, no modification is needed. For other sizes, you may need an adapter or to cut a new hole.

This DO904 9-in-1 multi-function car gauge brings together all the essential readings you need in one clear LCD display. With a full sensor kit, it turns your dashboard into a real-time command center for your vehicle's performance.

This gauge is built for drivers who want more than just a speedometer. It combines nine key functions into a single compact unit, so you can monitor your engine, turbo, voltage, and more without cluttering your dashboard. The bright LED display makes it easy to read at a glance, even during night drives.

Installation is straightforward thanks to the included full sensor kit. The system uses Bluetooth to connect the sensors to the display, giving you accurate, real-time data straight from your vehicle's ECU. It works with all 12V vehicles, making it a versatile upgrade for almost any car or truck.

Whether you are tuning your engine, keeping an eye on your turbo, or just want a cleaner dashboard setup, this gauge delivers the information you need in a simple, reliable package. The metal and ABS construction ensures it holds up to daily use, while the front placement keeps everything within your line of sight.

Key Features and Benefits

- 9-in-1 multi-function gauge that combines multiple readings into one display, reducing dashboard clutter and giving you all key data at a glance.

• Full sensor kit included that connects via Bluetooth to the display, making installation cleaner and more flexible than wired setups.

• Bright LED display with an ON/OFF switch that lets you control the RPM lights, so you can customize your dashboard look day or night.

• ABS, LCD, and metal construction that feels solid and durable, built to handle the vibrations and heat inside a vehicle cabin.

• Works with all 12V vehicles, so you can use it in cars, trucks, SUVs, and vans without compatibility worries.

• Front placement design that mounts easily on your dashboard, keeping the screen visible without blocking your view of the road.

Who Is This For

- Car enthusiasts who want to monitor engine performance metrics like RPM, boost, and voltage in real time.

• Tuner and hobbyist drivers who need accurate sensor data to fine-tune their vehicle's performance.

• Owners of older vehicles without built-in digital gauges who want a modern, multi-function upgrade.

• Anyone building a custom dashboard or rally car setup who needs a compact, all-in-one gauge solution.

Usage Scenario

Mark was getting ready for a weekend track day. He had just installed a new turbo kit on his sedan and needed to keep a close eye on boost levels and engine temperature. Instead of adding four separate gauges to his already busy dashboard, he mounted this 9-in-1 gauge on the front panel. With the sensor kit installed under the hood, he could see his RPM, turbo pressure, and coolant temp all on one screen. The LED lights flashed as he hit higher revs, giving him a clear visual cue without taking his eyes off the track. By the end of the day, he had dialed in his tune with confidence, knowing the data was accurate and easy to read.

Micro Comparison

Unlike OBD2-only gauges that read generic data from the vehicle's computer, this gauge uses dedicated sensors to capture real physical readings like turbo boost and oil pressure. This makes it a better choice for modified or tuned vehicles where factory sensors may not tell the full story. It also avoids the clutter of multiple single-function gauges by combining nine readings into one clean display.

Specifications

- Material: ABS + LCD + METAL

• Item Length: 186 mm

• Item Width: 22 mm

• Item Height: 102 mm

• Item Weight: 1.32 kg

• Placement on Vehicle: FRONT

• Special Features: 9-in-1 Multi-Function Gauge

• Power: 12V vehicle

• Connection: Bluetooth between sensor and display

Package Includes

- 1 x DO904 Multi-Function Gauge Display

• 1 x Full Sensor Kit

• 1 x Wiring Harness

• 1 x Mounting Bracket

• 1 x User Manual

Why You Will Love It

You will love having all your critical engine data in one place without the hassle of wiring multiple gauges. The bright LED display and customizable lights make your dashboard look clean and professional. It gives you the confidence to push your car harder, knowing you have accurate sensor data right in front of you.

Questions and Answers

Question: Is this gauge waterproof?

Answer: No, the DO904 model is not waterproof. Only the DO908 model has a life waterproof feature.

Question: What vehicles is this gauge compatible with?

Answer: It works with all 12V vehicles, including cars, trucks, SUVs, and vans.

Question: How does the gauge connect to the vehicle?

Answer: It uses sensors that connect to the vehicle's Data Processing Unit (DPU). The sensor data is then sent to the display via Bluetooth.

Question: Why doesn't this gauge use OBD2 directly?

Answer: OBD2 and the dedicated sensors read different types of data. The sensors in this kit provide readings like turbo boost and oil pressure that OBD2 may not capture accurately on modified vehicles.

Question: How bright is the LED display?

Answer: The LED lights have an ON and OFF switch. When set to ON, the four pairs of LED lights on the front of the dashboard light up as the RPM increases.

Question: Is the data from this gauge accurate?

Answer: The gauge acts as a data porter. The real and effective data comes from the vehicle's ECU, so accuracy depends on the data provided by the ECU.

Question: Does the product have a warranty?

Answer: Yes, it comes with a one-year warranty (excluding damage caused by the user). Proof of professional installation is required for any warranty claims.

Monitor your engine's performance with a clear, multi-color digital display. This 62mm gauge gives you real-time readings for boost, water temperature, and oil temperature, helping you keep your car running at its best.

This GReddi gauge is built for drivers who want to track vital engine data without cluttering their dashboard. The 2.5-inch face fits standard gauge pods, and the 7-color backlight lets you match your interior or dashboard lighting. It works with 4, 6, and 8-cylinder engines, making it a versatile upgrade for most vehicles.

The gauge includes the sensors and wiring you need to get started. It connects in series with other gauges, so you can build a complete monitoring system. The auto-ignition feature powers the gauge on when you start the car, and the audible alert draws your attention if readings go outside normal range.

Installation is straightforward for anyone comfortable with basic car wiring. The included holder gauge keeps the unit secure, and the 270-degree visible angle means you can read the display from your driving position without straining.

Key Features and Benefits

- 7-color switchable backlight that lets you customize the look to match your dashboard or personal style

• Measures boost, water temperature, and oil temperature so you can monitor three critical engine parameters with one gauge

• Auto-ignition with sound alert that turns on the gauge when you start the car and warns you if readings are abnormal

• Works with 4, 6, and 8-cylinder engines, making it a flexible choice for a wide range of vehicles

• Includes sensor and cables so you have everything needed for installation right in the box

• Can be connected in series with other gauges, allowing you to expand your monitoring system over time

Who Is This For

- Car enthusiasts who want to keep an eye on turbo boost and engine temperatures during daily driving or track sessions

• DIY mechanics installing their own gauges and looking for a complete kit with sensors and wiring included

• Drivers with older vehicles who want to add modern monitoring without replacing the entire dashboard

Usage Scenario

Mark had just finished a turbo upgrade on his sedan and needed a reliable way to watch boost pressure and oil temperature. He installed this GReddi gauge in his center console pod, connected the sensors, and took the car for a test drive. The 7-color display let him set a cool blue backlight that matched his interior LEDs. During hard acceleration, he could see boost building smoothly, and the oil temp reading gave him confidence that the engine was warming up properly before he pushed it harder. The audible alert never went off, but knowing it was there made him feel more secure on long highway runs.

Micro Comparison

Unlike basic single-function gauges that only show one reading, this GReddi unit combines boost, water temp, and oil temp monitoring in a single 62mm housing. The switchable 7-color backlight gives you more visual customization than standard white or amber gauges. The included sensors and cables also save you the extra cost and hassle of buying them separately.

Specifications

- Size: 2.5 inch (62mm)

• Material: ABS plastic

• Visible angle: 270 degrees

• Light colors: 7 colors (switchable)

• Style: Black face

• Compatible with: 4/6/8 cylinder engines

Package Includes

- 1 x Gauge

• 1 x Holder gauge

• 1 x Sensor

• 1 x Cable set

Why You Will Love It

You get a complete monitoring solution in one compact package, saving you time hunting for separate parts. The multi-color display lets you personalize your cockpit, and the three-in-one function keeps your dashboard clean and organized. It gives you the data you need to drive with confidence, whether you are tuning for performance or just keeping your daily driver healthy.

Questions and Answers

Question: Does this gauge work with diesel engines?

Answer: This gauge is designed for 4, 6, and 8-cylinder gasoline engines. It may not be compatible with diesel engines.

Question: What size hole do I need to mount this gauge?

Answer: The gauge has a 62mm (2.5 inch) diameter, so you need a mounting hole of the same size.

Question: Can I change the backlight color while driving?

Answer: Yes, you can switch between the 7 colors using the button on the gauge face.

Question: Is the wiring harness long enough for a truck?

Answer: The included cables are suitable for most cars and SUVs. For larger trucks, you may need to extend the wiring.

Question: Does this gauge come with a user manual?

Answer: The gauge includes basic wiring instructions, but a detailed manual is not included. You can find wiring diagrams online for standard automotive gauges.

Question: Can I use this gauge with an aftermarket turbo kit?

Answer: Yes, as long as your engine is a 4, 6, or 8-cylinder gasoline engine, the gauge will work with most aftermarket turbo setups.

Monitor your vehicle's vital signs with this 52mm 12V car gauge set. Choose from seven individual gauges including water temperature, oil temperature, oil pressure, fuel level, volts, ammeter, and oil pressure kg. Each gauge features a durable metal construction and a black shell that fits standard 2-inch (52mm) gauge pods for a clean, professional look in your dashboard.

These gauges are designed for gasoline engines only and operate on a 12V electrical system. Each unit measures 6.9 cm in length, 7.3 cm in width, and 3.3-4 cm in height, making them compact enough to fit into most standard gauge holders without taking up extra space. The lightweight design at 0.1 kg per gauge means they won't add unnecessary weight to your dash setup.

Installation is straightforward with the included 1/8 NPT sensor thread size, which is a common standard for aftermarket automotive sensors. The ohm range of E240Ω to F33Ω ensures compatibility with most standard sending units. Whether you're building a custom dash or replacing a faulty gauge, this set gives you the essential readings you need to keep your engine running smoothly.

Choose the exact gauge you need from seven available options. Each option is sold individually, so you can pick the specific measurement that matters most for your vehicle. The black shell design blends well with most interior styles and aftermarket gauge pods.

Key Features and Benefits

- 52mm (2-inch) standard size that fits most gauge pods for easy installation

• 12V electrical system compatibility that works with most gasoline vehicles

• Metal construction that provides durability and long-lasting performance

• 1/8 NPT sensor thread size that matches common aftermarket sensors

• Seven gauge options including water temp, oil temp, oil press, fuel, volts, ammeter, and oil press kg

• Black shell design that complements most interior dashboards

• Lightweight at 0.1 kg per gauge for easy mounting without added weight

Who Is This For

- DIY car enthusiasts building or upgrading their dashboard gauge setup

• Drivers who need to replace a broken or inaccurate factory gauge

• Custom car builders looking for individual gauges for specific measurements

• Mechanics and technicians who want reliable readings for diagnostics

Usage Scenario

Mark noticed his car's temperature gauge was stuck on cold even after driving for twenty minutes. He didn't want to replace the entire gauge cluster, so he ordered a single water temperature gauge from this set. After installing it in an empty slot in his dash pod, he could finally see accurate readings. The gauge showed him the engine was reaching normal operating temperature, confirming the thermostat was working properly. Now he drives with confidence knowing he can spot cooling issues before they become problems.

Micro Comparison

Unlike universal gauge sets that force you to buy multiple gauges you may not need, this product lets you choose only the gauge that fits your specific requirement. The 52mm size is a standard aftermarket dimension, making it easy to find compatible pods and mounting kits. Many budget gauges use plastic housings, but this one uses a metal shell for better durability and heat resistance.

Specifications

Material: Metal

Size: 52mm diameter, 12V

Item Length: 6.9 cm

Item Width: 7.3 cm

Item Height: 3.3-4 cm

Item Weight: 0.1 kg

Ohm: E240Ω-F33Ω

Sensor Thread: 1/8 NPT

Compatibility: Gasoline engines only

Package Includes

- 1 x Car Gauge (selected option)

Why You Will Love It

You get the exact gauge you need without paying for extras you'll never use. The metal construction and standard 52mm size make installation simple and the result looks like a factory-fit upgrade. Knowing your engine's vital stats at a glance gives you peace of mind on every drive.

Questions and Answers

Question: Will this gauge work with my 12V diesel truck?

Answer: No, these gauges are not applicable to diesel engines. They are designed for gasoline engines only.

Question: What size hole do I need to mount this gauge?

Answer: You need a standard 52mm (2-inch) diameter hole. Most aftermarket gauge pods and mounting kits accept this size.

Question: Does the gauge come with a sending unit or sensor?

Answer: The gauge uses a 1/8 NPT sensor thread size. You will need to use a compatible sending unit for your specific measurement type.

Question: Can I buy multiple different gauges from this set?

Answer: Yes, each gauge is sold individually. You can choose the specific gauge you need from the seven available options.

Question: Is the gauge face illuminated for night driving?

Answer: The product specifications do not mention any illumination features. Please check the product images for visual details.

Monitor your engine's vital signs with the Dynoracing 52mm digital gauge series. This collection of auto gauges gives you real-time data on boost pressure, water temperature, oil temperature, oil pressure, voltage, and RPM. Each gauge uses a bright blue LED digital display for easy reading in any light. Whether you drive a turbocharged sports car or a classic gasoline vehicle, these gauges help you keep an eye on performance and prevent problems before they start.

The 52mm (2 inch) size fits standard gauge pods and panels. The tinted black gauge face with a black ring gives your dashboard a clean, professional look. Installation is straightforward with the included English instructions and wiring. Each gauge runs on a 12V power supply and draws a maximum of 0.3A. Choose the specific gauge you need for your setup, from a single boost gauge to a complete set of monitoring tools.

These gauges are built with an ABS housing and a durable electronic sensor. The blue digital readout provides clear, precise numbers so you can track changes instantly. The boost gauge reads from -14 to 30 PSI or -1 to 2 bar. The water temp and oil temp gauges cover 40 to 150 degrees Celsius. The voltmeter measures 8 to 18V with a warning point at 10V. The tachometer reads 0 to 9999 RPM and includes a warning light above 5000 RPM. The exhaust gas temp gauge ranges from 200 to 1300 degrees Celsius with a warning at 900 degrees Celsius.

These gauges are designed for 12V gasoline cars. The tachometer specifically fits 4, 6, or 8 cylinder engines. All gauges come with the necessary sensor, cable, and mounting hardware. The boost gauge includes an electronic boost sender, a 6-foot PVC hose, and a T-fitting. Each gauge is a brand new unit ready to install.

Key Features and Benefits

- Blue digital LED display that makes numbers easy to read day or night

• 52mm (2 inch) size that fits standard gauge pods and dash openings

• Tinted black gauge face with black ring for a sleek, factory-like appearance

• Universal fit for most 12V gasoline cars, making it a versatile upgrade

• Includes English installation instructions for a straightforward setup process

• Electronic sensor included with each gauge for accurate and reliable readings

Who Is This For

- Car enthusiasts who want to monitor turbo boost, oil pressure, or engine temperature

• DIY mechanics installing aftermarket gauges in a 12V gasoline vehicle

• Owners of 4, 6, or 8 cylinder cars looking for a tachometer with a warning light

• Drivers who need a compact, single-gauge solution for a specific parameter like voltage or water temp

Usage Scenario

Mark drives a modified turbocharged coupe. After a few long pulls, he noticed the engine temperature creeping up but had no way to confirm it. He installed a Dynoracing water temp gauge and a boost gauge into his A-pillar pod. Now he can see his boost pressure spike to 15 PSI and watch the water temp stay steady at 85 degrees Celsius during hard driving. The blue LED display is easy to glance at without taking his eyes off the road. He feels more confident pushing the car knowing he has real-time data right in front of him.

Micro Comparison

Unlike analog gauges that rely on a needle and a small dial, these Dynoracing digital gauges give you a precise numeric readout. The blue LED display is more visible in low light compared to standard white backlighting. The included electronic sensor and installation kit mean you have everything you need in one box, so you do not have to source parts separately.

Specifications

- Size: 52mm diameter / 2 inch

• Material: ABS

• Voltage: 12V DC, IGN MAX 0.3A

• Boost gauge range: -14 to 30 PSI / -1 to 2 bar

• Water temp gauge range: 40 to 150 degrees Celsius

• Oil temp gauge range: 40 to 150 degrees Celsius

• Voltmeter range: 8 to 18V, warning at 10V

• Tachometer range: 0 to 9999 RPM, warning above 5000 RPM

• Exhaust gas temp gauge range: 200 to 1300 degrees Celsius, warning at 900 degrees Celsius

• Sensor thread: NPT 1/8

• Display: Blue digital LED

Package Includes

- 1 x Gauge (selected type)

• 1 x Sensor

• 1 x Cable

• 1 x Screw knob

• 1 x English installation instruction

Why You Will Love It

You get accurate, real-time engine data displayed in a bright blue LED format that looks great on any dashboard. The 52mm size fits standard openings, and the included sensor and wiring make installation simple. Whether you are tuning for performance or just want peace of mind, this gauge gives you the information you need at a glance.

Questions and Answers

Question: Does this gauge work with a diesel engine?

Answer: These gauges are designed for 12V gasoline cars. The tachometer specifically fits 4, 6, or 8 cylinder gasoline engines. They are not recommended for diesel vehicles.

Question: Can I install this gauge myself?

Answer: Yes, each gauge comes with an English installation instruction sheet. Basic wiring knowledge is helpful, but the process is straightforward for most DIY users.

Question: What is the reading range for the boost gauge?

Answer: The boost gauge reads from -14 to 30 PSI or -1 to 2 bar. It includes an electronic boost sender and a T-fitting for installation.

Question: Is the display bright enough to see during the day?

Answer: Yes, the blue digital LED display is bright and clear in both daylight and nighttime conditions. The tinted black face helps reduce glare.

Question: Does the tachometer work on a 4-cylinder car?

Answer: Yes, the tachometer is designed to work with 12V, 4, 6, or 8 cylinder gasoline cars. It reads from 0 to 9999 RPM with a warning light above 5000 RPM.

Keep your engine running at its best with this versatile 52mm car gauge set. Designed for universal fitment on 12V vehicles, it lets you monitor everything from boost pressure to oil temperature in real time. Whether you drive a 4, 6, or 8 cylinder gasoline car, this gauge provides the data you need to stay in control of your engine's performance.

Each gauge features a super white backlight for clear visibility day or night. The metal and plastic housing is built to last, and the compact 52mm size fits neatly into most dash pods or mounting brackets. You can choose from nine different gauge types, including boost, water temp, oil temp, oil pressure, vacuum, and voltmeter, along with a tachometer for RPM readings.

Installation is straightforward with the included English instruction manual. A gauge holder is also available separately. Whether you are tuning for performance or just keeping an eye on your car's vitals, this gauge gives you the information you need at a glance.

Key Features and Benefits

- Super white backlight that makes readings easy to see in low light and nighttime driving.

• Universal 12V compatibility that works with most cars, trucks, and SUVs.

• Choice of nine gauge types so you can monitor the specific data that matters most to you.

• Compact 52mm size that fits standard gauge pods and mounting locations.

• Durable metal and plastic construction built to handle the vibrations and heat of the engine bay.

• Includes English installation instructions for a smoother setup process.

Who Is This For

- DIY car enthusiasts who want to install their own performance gauges.

• Drivers of turbocharged or supercharged vehicles who need to monitor boost pressure.

• Anyone restoring or upgrading a classic car with modern instrumentation.

• Mechanics looking for a reliable, budget-friendly gauge for diagnostic work.

Usage Scenario

Mark was chasing a mysterious overheating issue in his project car. He installed the water temp gauge from this set and within minutes saw the temperature climbing faster than expected. That reading helped him spot a stuck thermostat before it could cause engine damage. Now he keeps the oil pressure gauge on his daily driver to catch problems early.

Micro Comparison

Unlike single-function gauges that only monitor one parameter, this set gives you multiple options in one purchase. You can mix and match to build a custom dashboard that fits your exact needs. The super white backlight also provides better visibility than many standard gauges, especially at night or in tunnels.

Specifications

- Material: Metal and plastic

• Voltage: 12V

• Gauge diameter: 52mm

• Housing color: Gray

• Backlight: Super white

• Condition: 100% new

• Weight: 0.5kg

Package Includes

- 1x Car gauge (your selected type)

• 1x English installation instruction manual

• Gauge holder available separately

Why You Will Love It

This gauge gives you peace of mind by showing you exactly what your engine is doing. You will appreciate the clear display, easy installation, and the flexibility to choose the right gauge for your setup. It is a practical upgrade that helps you drive smarter and maintain your car with confidence.

Questions and Answers

Question: Is this gauge compatible with a 12V diesel engine?

Answer: The gauge is designed for 12V gasoline engines with 4, 6, or 8 cylinders. It may not work correctly with diesel engines.

Question: Does the boost gauge measure in PSI or Bar?

Answer: You can choose either a PSI or Bar version when selecting your gauge type.

Question: Can I install this gauge in a standard 52mm pod?

Answer: Yes, the gauge has a 52mm diameter and fits most standard gauge pods and mounting holes.

Question: Does the tachometer work with all 4, 6, and 8 cylinder engines?

Answer: Yes, the tachometer is designed to work with 4, 6, and 8 cylinder 12V gasoline engines.

Question: How bright is the super white backlight?

Answer: The backlight provides clear, bright white illumination that is easy to read at night without being distracting.

Stay informed about your vehicle's performance with this universal Digital GPS Speedometer. It combines OBD2 and GPS technology to give you real-time data on a clear heads-up display, helping you drive more safely and efficiently.

This smart gauge is designed to work with most vehicles from 2008 to 2024 that have an OBD2 interface. It projects essential driving information directly onto your windshield, so you can check your speed and navigation without taking your eyes off the road. The dual-mode system ensures you always have accurate data, even in areas with weak GPS signals.

Installation is simple and straightforward. Just plug the device into your vehicle's OBD2 port, and it will start working immediately. The compact design fits neatly on your dashboard without blocking your view, making it a practical upgrade for any modern car.

This tool is more than just a speedometer. It acts as a comprehensive car navigation assistant, helping you monitor your driving habits and vehicle health. Whether you are on a long road trip or your daily commute, it provides the information you need for a smoother ride.

Key Features and Benefits

- OBD2 and GPS dual-mode technology that ensures accurate speed and navigation data in all driving conditions

• Universal compatibility for vehicles with an OBD2 interface from 2008 to 2024 that makes it easy to install in most modern cars

• Heads-up display projection that lets you view critical information without looking down from the road

• Real-time car navigation and diagnostic monitoring that helps you track your vehicle's performance and fuel efficiency

• Plug-and-play installation that requires no complicated wiring or professional setup

Who Is This For

- Drivers who want to keep their eyes on the road while monitoring their speed and navigation

• Car enthusiasts who enjoy tracking real-time vehicle performance data

• Daily commuters looking for a safer and more efficient driving experience

• Long-distance travelers who need reliable navigation and speed information

Usage Scenario

Mark was driving through an unfamiliar city at night. He was struggling to glance at his phone for directions while keeping track of his speed. After installing this smart gauge, the navigation prompts and his current speed appeared right on his windshield. He could follow the route easily and knew exactly when to slow down, making the entire drive less stressful and much safer.

Micro Comparison

Unlike traditional speedometers that only show your speed, this gauge combines GPS navigation and OBD diagnostics into one device. It provides a more complete picture of your driving environment. You get the benefits of a modern navigation system and a performance monitor without needing multiple separate gadgets cluttering your dashboard.

Specifications

- Compatibility: Vehicles with OBD2 interface from 2008 to 2024

• Technology: OBD2 and GPS

• Type: Smart gauge and heads-up display

Package Includes

- 1 x Digital GPS Speedometer Smart Gauge

Why You Will Love It

This gauge turns your car into a smarter vehicle. It helps you drive with more confidence by putting all the key information right where you need it. You will appreciate the extra safety and convenience it brings to every trip.

Questions and Answers

Question: Is this gauge difficult to install?

Answer: No, it is very simple. You just plug it into your car's OBD2 port, and it works right away.

Question: Will it work in my 2015 Toyota Camry?

Answer: Yes, it is compatible with most vehicles from 2008 to 2024 that have a standard OBD2 interface.

Question: Does it work without a GPS signal?

Answer: Yes, it uses both OBD2 and GPS. When GPS is weak, it relies on the OBD2 data for speed.

Question: Can I see navigation directions on the display?

Answer: Yes, it can show navigation prompts to help guide you on your route.

Question: Does it work with older cars from 2005?

Answer: No, it is only suitable for cars with an OBD2 interface from 2008 to 2024. Older models with an OBD1 interface are not compatible.

Keep an eye on your engine's vital signs with this 52mm digital gauge set. Choose from nine different gauge types to monitor boost pressure, water temperature, oil temperature, oil pressure, voltage, exhaust gas temperature, or RPM. Each gauge features a clear blue LED digital display for easy reading, day or night.

These gauges are designed for 12-volt cars and include an English installation instruction manual to help you get started. You can pick the specific gauge you need, or combine multiple units to build a custom monitoring setup for your vehicle.

Each gauge comes with a holder for mounting, and additional holders are available separately if needed. The compact 52mm size fits standard gauge pods and panels, making it simple to integrate into your dashboard or A-pillar mount.

Key Features and Benefits

- Digital display with blue LED lighting shows clear readings in low light conditions

• 52mm standard size fits most gauge pods and mounting panels

• Choose from nine gauge types to match your specific monitoring needs

• Includes English installation instructions for straightforward setup

• Works with 12-volt electrical systems found in most cars and light trucks

Who Is This For

- Car enthusiasts who want to monitor engine performance and health

• DIY mechanics installing aftermarket gauges in their own vehicle

• Drivers of turbocharged or supercharged cars needing boost pressure readings

• Anyone building a custom gauge cluster for a project car or race vehicle

Usage Scenario

Mike finished installing a turbo kit on his daily driver and needed a way to keep an eye on boost pressure and exhaust gas temperature. He picked up the boost gauge and EGT gauge from this set, mounted them in a dual pod on his A-pillar, and wired them in over a weekend. Now he can monitor both readings at a glance during spirited drives, catching any issues before they become problems.

Micro Comparison

Unlike analog gauges that require interpreting needle positions, this digital set gives you exact numbers on a bright LED screen. The nine-gauge selection lets you buy only what you need instead of a pre-set kit. Each gauge comes with its own holder and instructions, so you can install them one at a time as your budget allows.

Specifications

- Material: ABS

• Item Height: 52 mm

• Item Width: 52 mm

• Item Length: 5 cm

• Item Weight: 0.3 kg

• Placement on Vehicle: Front

• Gauge types available: Boost gauge PSI (-14-29 PSI), Boost gauge BAR (-1-2 BAR), Water temp gauge (40-150°C), Oil temp gauge (40-150°C), Oil press gauge PSI (0-150 PSI), Oil press gauge BAR (0-7 Bar), Voltmeter (0-15 V), Exhaust gas temp gauge (0-1300°C), Tachometer RPM (0-9999 RPM)

• Fitment: 12 Volt, 4/6/8 cylinder gasoline cars

Package Includes

- 1 x Digital gauge (your selected type)

• 1 x Gauge holder

• 1 x English installation instruction manual

Why You Will Love It

You get real-time digital readings that are easy to see in bright sunlight or at night. The blue LED display gives your dashboard a modern, race-inspired look. With nine gauge options, you can build a monitoring system that covers exactly what matters for your engine.

Questions and Answers

Question: Will these gauges work in my diesel truck?

Answer: The gauges are designed for 12-volt gasoline cars with 4, 6, or 8 cylinders. They may not be compatible with diesel engines without additional sensors.

Question: Do I need to buy a separate wiring harness?

Answer: The gauge comes with wiring leads for connection. You may need to supply your own wire and connectors depending on your vehicle and installation setup.

Question: Can I use the water temp gauge with an aftermarket radiator?

Answer: Yes, as long as you have a compatible temperature sensor that fits your radiator or coolant line, the gauge will work.

Question: What is the difference between the PSI and BAR boost gauges?

Answer: The PSI gauge reads from -14 to 29 PSI, while the BAR gauge reads from -1 to 2 BAR. Choose based on the unit system you prefer.

Question: Does the tachometer work on all gasoline engines?

Answer: The tachometer is designed for 12-volt gasoline engines with 4, 6, or 8 cylinders. It may not work on diesel or rotary engines.

Keep your vehicle's vital signs in check with this 3-in-1 digital gauge. It displays oil pressure, water temperature, and battery voltage on a clear LCD screen, helping you monitor engine health at a glance. Designed for cars, trucks, SUVs, and RVs, this universal instrument works with a wide 9-36V power supply.

This gauge combines three essential readouts into one compact unit. The digital LCD display makes it easy to see your oil pressure, coolant temperature, and voltage levels without guessing. It is built for easy installation and delivers precise, stable readings to help you catch potential problems early.

The gauge includes a self-learning function that adapts to your vehicle's oil float resistance. It also features an anti-shake design for the oil level reading, so the display stays accurate even on bumpy roads. When voltage runs too high or too low, the screen flashes an alarm to alert you.

Whether you drive a daily commuter, a work truck, or an off-road vehicle, this gauge provides reliable data in a simple, space-saving format. It performs well in a range of temperatures and is built to handle the vibrations of regular driving.

Key Features and Benefits

- 3-in-1 digital display that shows oil pressure, water temperature, and voltage in one screen for quick monitoring

• Wide 9-36V working voltage that fits most cars, trucks, SUVs, and RVs without extra adapters

• Self-learning function that automatically matches your vehicle's oil float resistance for accurate readings

• Anti-shake oil level feature that keeps the display stable during bumps and rough roads

• Flashing voltage alarm that warns you when power is too low or too high to prevent damage

• Easy installation with included sensors and screws for a straightforward setup

Who Is This For

- Car owners who want a simple way to track engine oil pressure and coolant temperature

• Truck and RV drivers who need reliable gauge readings during long trips

• DIY mechanics adding aftermarket monitoring to their vehicle's dashboard

• Off-road enthusiasts who drive on rough terrain and need stable, accurate data

Usage Scenario

Mark drives his old SUV on weekend camping trips. He noticed the temperature gauge on his dashboard was not reliable. After installing this 3-in-1 gauge, he can see the exact water temperature and oil pressure on a bright digital display. On a bumpy forest road, the reading stayed steady, and the voltage alarm gave him peace of mind when he ran the winch. Now he checks the gauge before every trip.

Micro Comparison

Many single-function gauges require separate units for oil pressure, temperature, and voltage. This 3-in-1 model combines them into one compact display, saving dashboard space and reducing wiring. Its self-learning oil float feature also sets it apart from basic gauges that need manual calibration.

Specifications

Material: Plastic shell

Color: Black

Working Voltage: 9-36V

Working Temperature: -40 to 50°C / -40 to 122°F

Power Cable Length: approx. 50 cm / 19.7 in

Voltage Test Range: 9-39V, Accuracy: ±0.1%

Water Temperature Measurement Range: -10 to 120°C / 14 to 248°F, Accuracy: ±0.1%

Oil Test Range: 0-1.0 MPa, Accuracy: ±0.1%

Water Temperature Sensor Thread: M10

Oil Pressure Sensor Thread: 1/8 NPT

Measurement Speed: 3-5 seconds

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x Car Instrument

• 2 x Screws

Why You Will Love It

You will appreciate having three critical engine readings in one easy-to-read display. The self-learning setup saves you time, and the anti-shake design keeps data reliable on any road. It is a practical upgrade for anyone who wants to stay informed about their vehicle's condition.

Questions and Answers

Question: Can I install this gauge myself?

Answer: Yes, installation is designed to be straightforward. The gauge comes with sensors and screws, and the power cable connects to your vehicle's 9-36V system.

Question: Does this gauge work on a 12V car?

Answer: Yes, it works on 12V systems as well as 24V systems. The working voltage range is 9-36V, covering most cars, trucks, and RVs.

Question: What does the flashing alarm mean?

Answer: The alarm flashes when the voltage is lower than 10V, between 16-20V, or above 31V. This alerts you to potential electrical issues.

Question: Will the gauge stay accurate on bumpy roads?

Answer: Yes, the oil level reading has an anti-shake function that keeps the display stable even when the vehicle hits bumps or rough terrain.

Question: Does the gauge need calibration for my vehicle?

Answer: No, the gauge has a self-learning function that automatically adapts to your vehicle's oil float resistance, so no manual calibration is needed.

Monitor your engine's vital signs with this complete 52mm car gauge set. It includes a turbo boost gauge, water temperature gauge, oil temperature gauge, oil pressure gauge, tachometer, voltmeter, vacuum gauge, air-fuel ratio gauge, and exhaust temperature gauge. This kit gives you a full picture of your vehicle's performance in one package.

These gauges are designed for 12V gasoline vehicles and fit a standard 52mm / 2-inch pod or mounting hole. The tachometer works with 1 to 8-cylinder engines. Each gauge uses a clear analog display with a backlit face for easy reading, day or night.

The boost gauge comes in two versions. The PSI unit includes a turbo function, while the Bar unit works without a turbo. Water temperature, oil temperature, and oil pressure gauges come with the needed sensors. The air-fuel ratio gauge works with narrow band oxygen sensors and requires a separate sensor purchase. English installation instructions are included.

This gauge set is a practical upgrade for anyone who wants to keep an eye on engine health. It helps you spot potential problems early, from overheating to low oil pressure, so you can take action before serious damage occurs.

Key Features and Benefits

- Complete gauge set that covers boost, temperature, pressure, voltage, RPM, vacuum, air-fuel ratio, and exhaust temperature for comprehensive engine monitoring

• Standard 52mm / 2-inch size that fits most universal gauge pods, pillars, and dash mounts for easy installation

• Tachometer compatible with 1 to 8-cylinder gasoline engines for broad vehicle fitment

• Water temperature, oil temperature, and oil pressure gauges include sensors to simplify setup

• Boost gauge with dual unit options (PSI with turbo function, Bar without turbo) to match your engine setup

• English installation guide included for straightforward wiring and mounting

Who Is This For

- Car enthusiasts who want a complete engine monitoring system for a 12V gasoline vehicle

• DIY mechanics installing aftermarket gauges in a custom gauge pod or dash mount

• Drivers of turbocharged or naturally aspirated cars who need both boost and vacuum readings

• Anyone replacing old or broken factory gauges with a unified aftermarket set

Usage Scenario

Mark had just finished a turbo upgrade on his project car. He needed to keep a close watch on boost pressure, oil temperature, and water temperature during tuning sessions. After mounting this gauge set in a 52mm pod on his A-pillar, he could see his boost spool in real time and watch the oil temp climb during hard pulls. The tachometer helped him set his shift points, and the voltmeter gave him peace of mind that his charging system was keeping up. Within a few drives, he had dialed in his tune with confidence, knowing he could catch any issue before it became a costly problem.

Micro Comparison

Single gauges can be expensive and time-consuming to install one by one. This set gives you nine essential readings in one package, saving you money and wiring effort. The included sensors for water temperature, oil temperature, and oil pressure reduce the need for extra purchases. If you are building a custom dash or upgrading a daily driver, this kit provides a complete solution without hunting down each gauge separately.

Specifications

Material: Plastic + Metal

Item Height: 52 mm / 2.0 in

Item Length: 57 mm / 2.2 in

Item Width: 50 mm / 2.0 in

Item Weight: 0.3 kg / 10.6 oz

Tachometer: 0~10x1000 RPM

Boost Gauge PSI: -30~35 PSI

Boost Gauge Bar: -1~2 Bar

Vacuum Gauge: -30~0 In.hg

Water Temperature Gauge: 40~140°C / 104~284°F

Oil Temperature Gauge: 40~140°C / 104~284°F

Oil Pressure Gauge PSI: 0~100 PSI

Oil Pressure Gauge Bar: 0~7 Bar

Voltmeter: 8~18 V

Air Fuel Ratio Gauge: 20:1~10:1

Exhaust Temperature Gauge: 2~12x100°C / 200~1200°C

Sensor Thread Size: 1/8 ZG

Placement on Vehicle: Front

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x Tachometer

• 1 x Boost Gauge PSI

• 1 x Boost Gauge Bar

• 1 x Vacuum Gauge

• 1 x Water Temperature Gauge

• 1 x Oil Temperature Gauge

• 1 x Oil Pressure Gauge PSI

• 1 x Oil Pressure Gauge Bar

• 1 x Voltmeter

• 1 x Air Fuel Ratio Gauge

• 1 x Exhaust Temperature Gauge

• Sensors for water temperature, oil temperature, and oil pressure

• English installation instructions

Why You Will Love It

Having all your engine data in one place gives you real control over your car's performance. You will feel more confident on the road or track, knowing you can spot a problem before it gets serious. This set turns a messy collection of single gauges into a clean, professional-looking dashboard.

Questions and Answers

Question: Will these gauges work with a diesel engine?

Answer: No, this gauge set is designed for 12V gasoline vehicles only. It is not compatible with diesel engines.

Question: Does the air-fuel ratio gauge come with an oxygen sensor?

Answer: No, the air-fuel ratio gauge does not include a sensor. You need to purchase a narrow band oxygen sensor separately.

Question: What size mounting hole do I need for these gauges?

Answer: Each gauge has a standard 52mm / 2-inch diameter and fits a 52mm mounting hole or gauge pod.

Question: Are the sensors included for all gauges?

Answer: Sensors are included for the water temperature gauge, oil temperature gauge, and oil pressure gauge. The other gauges do not require external sensors.

Question: Will this tachometer work on a 4-cylinder car?

Answer: Yes, the tachometer is compatible with 1 to 8-cylinder gasoline engines, including 4-cylinder cars.

Monitor your engine's key vitals in real time with this versatile 52mm gauge set. Designed for 12V gasoline vehicles, it gives you clear readings for oil pressure, water temperature, oil temperature, exhaust temp, turbo boost, tachometer, and more. The 8-color backlight lets you match your dashboard style or driving mood instantly.

This universal gauge kit replaces the need for multiple single-purpose meters. With a compact 52mm diameter and a lightweight plastic shell, it fits neatly into standard gauge pods or custom dash setups. The front-mounted design makes it easy to read at a glance while keeping your focus on the road.

Each reading is displayed in familiar units, from Celsius temperature scales to BAR and PSI pressure ranges. The tachometer covers up to 9000RPM, while the exhaust temp gauge reaches up to 1100°C. Whether you are tuning for performance or just keeping an eye on engine health, this set provides the data you need without clutter.

The 8-color backlight is simple to adjust and adds a custom look to any interior. From subtle blue to bold red, you can switch colors to match your dashboard lighting or personal preference. It is a practical upgrade that also gives your car a more professional, race-inspired feel.

Key Features and Benefits

- 8-color backlight that lets you personalize your dashboard look to match your style or mood

• 52mm universal size that fits standard gauge pods and most aftermarket dash setups

• Multiple reading modes including oil pressure, water temp, oil temp, exhaust temp, turbo boost, tachometer, vacuum, fuel pressure, and air-fuel ratio

• Dual-unit pressure display (BAR and PSI) so you can read data in the format you prefer

• Plastic shell construction that keeps the gauge lightweight and easy to install

Who Is This For

- Car enthusiasts who want real-time engine data for performance tuning or daily monitoring

• DIY mechanics looking to upgrade their dashboard with a clean, multi-function gauge set

• Owners of 12V gasoline vehicles who want a single kit covering oil, water, boost, and RPM readings

• Drivers who enjoy customizing their interior lighting with a choice of 8 backlight colors

Usage Scenario

Jake spent last weekend installing this gauge set in his 2005 coupe. He had been worried about his turbo spiking without warning, but now the boost gauge sits right in his line of sight. During a test drive, he noticed the water temp climbing faster than usual and pulled over before any damage was done. The oil pressure reading also confirmed his suspicion about a worn pump. For the cost of one shop diagnostic, he now monitors five critical systems at once.

Micro Comparison

Unlike single-function gauges that require separate pods and wiring for each reading, this kit combines multiple sensors into one unified display. You get oil pressure, water temp, oil temp, exhaust temp, turbo boost, tachometer, vacuum, fuel pressure, and air-fuel ratio from a single 52mm unit. The 8-color backlight also gives you customization that most basic gauges lack.

Specifications

- Material: Plastic shell

• Diameter: 52mm / 2.05 in

• Weight: 390g / 13.76 oz

• Voltage: 10-15V (12V system)

• Water Temp Range: 20-120°C / 68-248°F

• Oil Temp Range: 50-150°C / 122-302°F

• Oil Press Range: 0-10 BAR / 0-140 PSI

• RPM Range: 0-9000 RPM

• Vacuum Range: -1 to 0.2 BAR

• Boost Range: -1 to 2 BAR / -20 to 25 PSI

• Boost 3BAR Range: -1 to 3 BAR

• Exhaust Temp Range: 200-1100°C / 392-2012°F

• Air-Fuel Ratio Range: 10-20

• Fuel Press Range: 0-6 BAR / 0-87 PSI

• Backlight: 8 colors

• Placement on Vehicle: Front

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x Gauge unit

• 1 x Oil Pressure sensor

• 1 x Wiring harness

• 1 x Mounting bracket

• 1 x Instruction manual

Why You Will Love It

You get a full set of engine vitals in one compact gauge, saving space and wiring time. The 8-color backlight lets you match your dashboard mood without extra accessories. It is a practical tool that helps you catch issues early and drive with more confidence.

Questions and Answers

Question: What voltage does this gauge work with?

Answer: It works with 12V systems, operating between 10V and 15V.

Question: Can I use this on a diesel engine?

Answer: The source data indicates it is designed for 12V gasoline cars. For diesel compatibility, please verify with your vehicle specifications.

Question: How do I change the backlight color?

Answer: The gauge has 8 color options. You can switch them using the button on the gauge or the wiring harness, depending on your setup.

Question: Does this kit include all the sensors?

Answer: It includes an oil pressure sensor. Other sensors may be built into the gauge or require separate purchase based on your needs.

Question: What is the size of the gauge?

Answer: The gauge diameter is 52mm / 2.05 in. It fits standard 52mm gauge pods.

Question: Can I read both BAR and PSI?

Answer: Yes, the gauge displays pressure in both BAR and PSI for oil, boost, and fuel readings.

Monitor seven critical engine functions with a single, coordinated gauge set. This 52mm (2-inch) kit includes a tachometer, boost gauge (PSI and BAR), vacuum gauge, water temperature gauge, oil temperature gauge, oil pressure gauge, and a voltmeter. The matching smoke lens and sleek housing create a professional, unified look for your dashboard or A-pillar pod.

Each gauge is designed for 12-volt gasoline vehicles and covers the most common measurement ranges for performance and daily driving. The water temperature, oil temperature, and oil pressure gauges include the necessary sensors for installation. The boost gauge, vacuum gauge, and tachometer do not require sensors, making them straightforward to wire into your existing system. An English installation manual is included to guide you through the setup process.

This set is ideal for anyone who wants to keep a close eye on their engine's health. Whether you are tuning for performance, monitoring for potential issues, or simply adding a custom look to your interior, these gauges deliver reliable readings at a glance. The smoke lens reduces glare and gives the display a modern, subtle appearance when the lights are off.

Key Features and Benefits

- Seven essential gauges in one set that let you monitor RPM, boost, vacuum, temperatures, oil pressure, and voltage from a single location

• 52mm (2-inch) diameter with smoke lens that fits standard gauge pods and reduces dashboard glare

• Includes sensors for water temperature, oil temperature, and oil pressure so you can start measuring right away

• Works with 1 to 8 cylinder 12-volt gasoline engines, making it suitable for a wide range of cars and trucks

• English installation manual included that helps simplify the wiring and sensor connection process

Who Is This For

- Car enthusiasts who want to track engine performance and catch problems early

• DIY mechanics installing a custom gauge setup in their own vehicle

• Owners of turbocharged or high-performance cars who need boost and vacuum readings

• Drivers who prefer a coordinated gauge set with a matching smoke lens look rather than mismatched individual gauges

Usage Scenario

Mark recently installed a turbo kit on his daily driver and wanted to keep an eye on boost levels and engine temperatures. He picked up this 7-in-1 gauge set and mounted the gauges in a standard 52mm A-pillar pod. After a quick wiring session with the included manual, he could see his RPM, boost pressure, water temp, oil temp, oil pressure, and voltage all at once. On his first test drive, he noticed the oil temperature climbing higher than expected during a hard pull, so he backed off and let the engine cool down. The gauges gave him the confidence to push his car harder, knowing he could spot any issues before they became expensive repairs.

Micro Comparison

Many single-function gauges require you to buy each one separately, which can lead to a mismatched look and higher total cost. This set gives you seven matching gauges with a unified smoke lens design, so your dashboard stays clean and professional. The included sensors for temperature and pressure gauges save you the hassle of sourcing them individually.

Specifications

- Material: Metal and plastic housing

• Gauge diameter: 52mm / 2 inches

• Item height: 58mm / 2.3 inches

• Item width: 52mm / 2 inches

• Item length: 57mm / 2.2 inches

• Item weight: 0.3 kg / 10.6 oz

• Tachometer range: 0 to 8,000 RPM

• Boost gauge PSI: -30 to 30 PSI

• Boost gauge BAR: -1 to 2 BAR

• Vacuum gauge: -30 to 0 in.gh

• Water temperature gauge: 40 to 120 degrees Celsius / 104 to 248 degrees Fahrenheit

• Oil temperature gauge: 50 to 150 degrees Celsius / 122 to 302 degrees Fahrenheit

• Oil pressure gauge: 0 to 100 PSI

• Voltmeter: 8 to 16 V

• Compatible cylinders: 1 to 8

• Sensor thread size: 1/8 ZG

• Voltage: 12V DC

• Placement on vehicle: Front

Package Includes

- 1 x Tachometer gauge

• 1 x Boost gauge (PSI version)

• 1 x Boost gauge (BAR version)

• 1 x Vacuum gauge

• 1 x Water temperature gauge with sensor

• 1 x Oil temperature gauge with sensor

• 1 x Oil pressure gauge with sensor

• 1 x Voltmeter gauge

• 1 x English installation manual

Why You Will Love It

You get a complete engine monitoring system in one box, so there is no need to hunt for matching gauges from different brands. The smoke lens gives your dashboard a sleek, understated look that blends in until you power up the bright LED display. Knowing your engine's vitals at a glance brings real peace of mind, whether you are cruising or pushing the limits.

Questions and Answers

Question: Do all the gauges come with sensors?

Answer: No. The water temperature gauge, oil temperature gauge, and oil pressure gauge come with sensors. The boost gauge, vacuum gauge, tachometer, and voltmeter do not include sensors.

Question: Will these gauges work in a diesel vehicle?

Answer: These gauges are designed for 12-volt gasoline vehicles. The tachometer is suitable for 1 to 8 cylinder engines. Diesel engines have different ignition systems, so compatibility is not guaranteed.

Question: What size hole do I need to mount these gauges?

Answer: You need a 52mm (2-inch) diameter mounting hole for each gauge. Standard gauge pods and panels with 52mm openings will fit these gauges.

Question: Is the installation manual easy to follow?

Answer: Yes, an English installation manual is included. It provides wiring diagrams and instructions for each gauge. Professional installation is recommended if you are not experienced with automotive electrical work.

Question: The pointer is not at zero when I receive it. Is that normal?

Answer: Yes, this is normal. The pointer may not rest at zero when the gauge is not powered. Once you connect power, the pointer will return to the correct position and function properly.

Upgrade your vehicle's dashboard with a complete 6 gauge set that gives you all the critical engine and performance data at a glance. This package includes a large 85mm GPS speedometer and five 52mm gauges, all working together to monitor speed, RPM, voltage, temperature, oil pressure, and fuel level. The set comes with the necessary sensors and senders, making it a straightforward solution for car, truck, boat, or motorcycle projects.

The 85mm GPS speedometer uses satellite signals to deliver a precise 200kmh reading without needing a mechanical cable. It is paired with a matching 85mm tachometer that tracks up to 8000rpm and records total engine hours. The five 52mm gauges cover water temperature, oil pressure, fuel level, and voltage, giving you full visibility into your engine's health and performance.

Built for tough conditions, each gauge features a stainless steel bezel and an IP67 waterproof rating. The 7-color LED backlight lets you switch between red, yellow, orange, green, blue, purple, and white to match your interior lighting or personal style. This set is designed for easy installation on a variety of vehicles, from cars and trucks to boats and off-road machines.

Whether you are restoring a classic car, building a custom off-road rig, or upgrading a marine console, this gauge set provides the data you need in a clean, professional layout. The included sensors and detailed instructions help you get everything wired and running with less guesswork.

Key Features and Benefits

- GPS-based speedometer that provides accurate 200kmh readings without mechanical cable connections

• 7-color LED backlight that lets you switch between red, yellow, orange, green, blue, purple, and white to match your dashboard

• IP67 waterproof and dustproof rating that protects the gauges in wet or dusty environments

• 316 stainless steel bezel that resists corrosion from humidity, salt, and acidic conditions

• Complete set with all sensors and senders included for a simpler installation process

Who Is This For

- Car and truck owners who want to replace old or broken gauges with a modern, GPS-driven setup

• Boat owners looking for a waterproof gauge set that can handle marine conditions

• Motorcycle builders who need a compact, all-in-one instrument panel with multiple readings

• Off-road and 4x4 enthusiasts who require durable gauges for rough environments

Usage Scenario

Mark had just finished rebuilding the engine in his 1970s pickup truck. The old mechanical speedometer was inaccurate and the dashboard looked bare. He installed this 6 gauge set in a custom panel, running the GPS antenna to the roof and wiring the sensors to the engine block. Now he sees his exact speed, engine temperature, oil pressure, and fuel level all on one clean display. The LED backlight lets him switch to green at night, keeping the cabin easy on the eyes during long drives.

Micro Comparison

Unlike basic gauge sets that rely on mechanical speedometer cables or require separate senders for each reading, this kit bundles a GPS speedometer with all five supporting gauges and their sensors. The 7-color backlight gives you personalization that most standard white or green-only sets lack. The IP67 waterproof rating also makes it a stronger choice for marine or off-road use compared to typical automotive gauges.

Specifications

Speedometer diameter: 85 mm / 3-3/8 in

Tachometer diameter: 85 mm / 3-3/8 in

Small gauge diameter: 52 mm / 2-1/16 in

Speedometer range: 200 kmh

Tachometer range: 0-8000 RPM

Engine hours range: 0.0-99999.9H

Oil pressure range: 0-10 bar / 0-145 PSI

Water temperature range: 100-250°F / 40-120°C

Voltmeter range: 8-16V

Fuel level signal: 0-90 ohm

Working voltage: 12-24V (9-32V)

Material: Stainless steel and plastic

Waterproof rating: IP67

Backlight: 7-color LED

Item weight: 1.56 kg / 55.0 oz

Package Includes

- 1 x 85mm GPS Speedometer Gauge

• 1 x GPS Antenna

• 1 x 85mm Tachometer

• 1 x Tachometer Sender

• 1 x Voltmeter

• 1 x Water Temperature Gauge

• 1 x Water Temperature Sensor

• 1 x Oil Pressure Gauge

• 1 x Oil Pressure Sensor

• 1 x Fuel Level Gauge

• 1 x Fuel Level Sender

• 7 x Installation Instruction

Why You Will Love It

This gauge set turns a scattered dashboard into a unified, professional-looking control center. You get GPS accuracy for speed, a full set of engine monitors, and the freedom to change the backlight color to suit your mood or vehicle style. It is a practical upgrade that makes your ride feel more modern and reliable.

Questions and Answers

Question: Will this gauge set work on a 12V car system?

Answer: Yes, the set operates on 12-24V systems, so it works with standard car electrical systems.

Question: Does the GPS speedometer need a separate power source?

Answer: No, it connects to your vehicle's 12V or 24V power supply along with the GPS antenna.

Question: Can I change the backlight color after installation?

Answer: Yes, you can switch between 7 colors using the control button on the gauge.

Question: Are the sensors included with the gauges?

Answer: Yes, the package includes all sensors and senders for the tachometer, oil pressure, water temperature, and fuel level.

Question: Is this gauge set suitable for a boat?

Answer: Yes, the IP67 waterproof rating and stainless steel bezel make it a good fit for marine use.

This 52mm GPS speedometer gives you accurate speed and distance tracking on any vehicle. It uses a GPS antenna for reliable readings and includes a digital compass. The large LCD display is easy to read. It works on boats, cars, motorcycles, and yachts.

You get a clear view of your speed and mileage. The display shows current speed, total distance, and trip distance. It also has a compass to help with navigation. The speedometer works with a wide voltage range, so it fits many different vehicles.

Setting up the unit is simple. Connect the power and ground wires. Use the yellow wire to switch between knots, MPH, and km/h. The gauge saves your settings automatically. The GPS antenna locks onto satellites fast for a steady signal.

This gauge is built for tough conditions. It works in temperatures from -20 to 70 degrees Celsius. The trip meter resets when you turn off the power. The odometer keeps your total mileage saved even without power. This makes it a reliable choice for long trips or daily use.

Key Features and Benefits

- GPS antenna provides accurate speed data without needing a mechanical connection

• Large LCD display shows speed, odometer, trip distance, and compass for full trip information

• Adjustable unit switching between knots, MPH, and km/h to match your preference

• Odometer saves accumulated mileage even during power loss so you never lose your total distance

• Wide operating voltage from 9 to 32 VDC works with most boats, cars, and motorcycles

• Built-in digital compass from 0 to 359 degrees helps with basic navigation

Who Is This For

- Boat owners who want a reliable GPS speed display for navigation and trip tracking

• Motorcycle riders who need a compact speedometer upgrade with accurate readings

• Car enthusiasts installing a custom dashboard or replacing an old mechanical speedometer

• Yacht operators who require a durable gauge that works in marine environments

Usage Scenario

Mark took his fishing boat out on the lake. His old mechanical speedometer stopped working last season. He installed this 52mm GPS gauge in about 30 minutes. Now he sees his exact speed on the LCD screen. The compass helps him find his way back to the dock. The trip meter shows how far he traveled that day. He does not worry about losing his total mileage because the odometer saves it even when the boat sits in storage.

Micro Comparison

Mechanical speedometers use cables that can break or give wrong readings over time. This GPS model uses satellite signals for consistent accuracy. It does not need wheel sensors or complex wiring. The digital display is easier to read than old analog dials. The unit switching feature lets you use it anywhere without extra adapters.

Specifications

Operating voltage: 9 to 32 VDC

Operating current: 100 mA or less

Operating temperature: -20 to 70 degrees Celsius

Storage temperature: -30 to 80 degrees Celsius

Speed display range: 0 to 999.9

Total odometer range: 0 to 999999

Trip odometer range: 0 to 999.9

Digital compass range: 0 to 359 degrees

Unit options: knots, MPH, km/h

Package Includes

- 1 x 52mm GPS speedometer

• 1 x GPS antenna

• 1 x Installation kit

Why You Will Love It

You get accurate speed data without complicated setup. The gauge fits neatly into a standard 52mm dashboard hole. The bright LCD display is easy to read in sunlight. It gives you confidence that your speed readings are correct every time you hit the water or the road.

Questions and Answers

Question: How do I switch between MPH and km/h?

Answer: Touch the yellow wire to the negative terminal briefly. The unit switches between knots, MPH, and km/h and saves your choice automatically.

Question: Will this work on a 12-volt motorcycle?

Answer: Yes. The gauge operates on 9 to 32 VDC, so it works on standard 12-volt motorcycle electrical systems.

Question: Does the odometer reset when I disconnect the battery?

Answer: No. The odometer saves your accumulated mileage even after a power loss. Only the trip meter resets when you turn off the power.

Question: Can I install this on a car with a 52mm gauge hole?

Answer: Yes. The 52mm size fits standard gauge openings in many cars. You need to connect power, ground, and mount the GPS antenna.

Question: How long does it take to get a GPS signal?

Answer: The GPS antenna usually locks onto satellites within a minute after powering on. The speedometer then shows your current speed.

Monitor your engine's performance with a precise 52mm car gauge. This multi-function meter lets you track water temperature, oil temperature, voltage, oil pressure, and boost pressure all in one compact unit. Designed for 12V vehicles, it gives you real-time data to keep your engine running smoothly.

These gauges use stepper motors for accurate readings. The digital display makes it easy to see your engine's vitals at a glance. The pointer needs power to return to zero, which is normal for this type of motor. Installation is straightforward and the gauges are built to handle vibration and bumps on the road.

Each gauge has a 52mm diameter and fits standard 2-inch gauge pods. The plastic shell keeps the weight low while protecting the internal components. Whether you are tuning for performance or just want to keep an eye on your engine health, this gauge set provides the data you need.

Choose from multiple sensor types including water temp, oil temp, oil pressure, boost, vacuum, voltmeter, air fuel ratio, and exhaust gas temperature. Each option comes with the necessary sensor for accurate monitoring. The gauges are universal for most 12V gasoline cars.

Key Features and Benefits

- Digital display provides clear, intuitive readings at a glance

• Stepper motor design delivers stable and precise parameter display

• Low power consumption helps protect your vehicle's electrical system

• Anti-vibration and anti-bump construction ensures reliable performance on rough roads

• Easy installation fits most 12V gasoline vehicles with standard 52mm gauge openings

Who Is This For

- Car enthusiasts who want to monitor engine temperature and oil pressure

• Performance tuners tracking boost levels and air fuel ratio

• DIY mechanics installing aftermarket gauges for better engine diagnostics

• Owners of older vehicles who want to add modern monitoring capability

Usage Scenario

Mike noticed his engine temperature climbing during summer traffic. He installed a water temp gauge and an oil pressure gauge from this set. Now he can see exactly when his engine is running hot and adjust his driving. The voltmeter also helped him catch a failing alternator before it left him stranded.

Micro Comparison

Unlike basic dashboard warning lights, these gauges give you continuous numerical readings. You see the exact temperature or pressure instead of just a red light after something fails. The stepper motor design is more accurate than older air-core meter movements, giving you confidence in the data.

Specifications

Diameter: 52mm / 2 inches

Voltage: DC 12V

Material: Plastic shell

Color: Black

Weight: 500g / 17.6 oz

Package Includes

- 1 x Gauge (selected type)

• 1 x Sensor (for applicable gauge types)

• 1 x English installation instruction

Note: The gauge holder is not included and must be purchased separately.

Why You Will Love It

You get complete engine monitoring in a single 52mm package. The digital display makes it easy to spot problems early. With multiple sensor options, you can customize your setup to match exactly what you need to track.

Questions and Answers

Question: Will this gauge work on my diesel truck?

Answer: These gauges are designed for 12V gasoline vehicles. They may not work correctly with diesel engines or 24V systems.

Question: Does the gauge come with the sensor?

Answer: Yes, most gauge types include the corresponding sensor. The vacuum gauge and voltmeter do not include a sensor.

Question: Why does the needle not return to zero when the car is off?

Answer: These are stepper motor gauges. They need power to return to zero. This is normal operation.

Question: What size hole do I need to mount this gauge?

Answer: You need a 52mm or 2-inch diameter opening. A separate gauge holder or pod is required.

Question: Can I use this gauge with a 24V system?

Answer: No, these gauges are designed only for 12V DC systems. Using them with 24V can damage the gauge.

Monitor your engine's key vitals with a single 52mm gauge setup. This multi-function car gauge measures water temperature, oil temperature, oil pressure, boost pressure, voltage, vacuum, air-fuel ratio, and exhaust gas temperature. It fits most 12V gasoline vehicles and comes with the necessary sensors for accurate readings.

Keeping an eye on your engine's health helps you catch problems early. This gauge gives you real-time data on several critical systems. You can track coolant temperature to prevent overheating, monitor oil pressure to ensure proper lubrication, and check boost levels to optimize turbo performance. The digital display makes it easy to read at a glance, even while driving.

The gauge is built with a plastic shell and a stepper motor for precise needle movement. It needs to be powered on to return to zero, which is normal behavior for this type of motor. Installation is straightforward, and the gauge fits into a standard 52mm or 2-inch opening. It is designed to be stable, anti-vibration, and reliable for daily use.

Whether you are building a custom dashboard or replacing a worn-out gauge, this unit provides a cost-effective way to add multiple monitoring points. The included sensors cover the most common engine parameters, giving you a complete picture of your vehicle's performance.

Key Features and Benefits

- Digital display for intuitive observation that lets you see readings clearly and quickly

• Precise and stable parameter display with low power consumption for reliable long-term use

• Easy installation with stable performance, anti-vibration, and anti-bump design for durability on the road

• Universal fit for most 12V gasoline vehicles and fits 2-inch or 52mm gauge openings

• Stepper motor for accurate needle movement that provides consistent readings

Who Is This For

- Car enthusiasts building a custom gauge cluster for their project vehicle

• Drivers who want to monitor engine health and catch issues before they become serious

• Mechanics or DIY owners replacing a faulty or outdated gauge in a 12V car

• Anyone adding turbo boost, oil pressure, or temperature monitoring to a performance vehicle

Usage Scenario

Mark noticed his car's temperature gauge was acting up. He decided to install this multi-function gauge to get a clearer picture. After mounting it in his dash, he could see his water temp, oil temp, and oil pressure all on one display. A few weeks later, he spotted his oil pressure dropping slightly during a hard drive. He checked the oil level and found it was low, saving his engine from potential damage. Now he keeps an eye on all his vitals every time he drives.

Micro Comparison

Many single-function gauges only monitor one parameter, forcing you to buy multiple units. This gauge combines several key readings into one compact 52mm housing. It is a practical choice if you want to monitor multiple engine systems without cluttering your dashboard or spending extra on separate gauges.

Specifications

Color: Black

Voltage: DC 12V

Diameter: 52mm / 2 inches

Material: Plastic Shell

Item Weight: 500g

Gauge types available: Turbo Gauge (Bar) (-1BAR-2.0BAR), Water Temp Gauge (40-120 Celsius), Oil Temp Gauge (50-150 Celsius), Oil Press Gauge (0-7 BAR), Volt meter (8V-18V), Air fuel ratio Gauge (20~10), Exhaust temp Gauge (3-13 x100 Celsius), Vacuum Gauge (30~0 in.Hg), Tachometer (0-8x1000)

Package Includes

1 x Gauge

Gauge holder not included and must be purchased separately.

Why You Will Love It

You get a complete engine monitoring solution in one compact gauge. It helps you stay informed about your car's condition, giving you confidence on every drive. The simple installation and clear display make it a practical upgrade for any 12V gasoline vehicle.

Questions and Answers

Question: Does this gauge work on a diesel engine?

Answer: This gauge is designed for 12V gasoline vehicles. It may not be compatible with diesel engines.

Question: Does the gauge come with all the sensors shown?

Answer: Yes, the sensor for the specific gauge you choose is included. For example, the water temp gauge comes with a water temp sensor.

Question: Why does the needle not return to zero when the car is off?

Answer: The gauge uses a stepper motor that needs power to return to zero. This is normal behavior.

Question: What size hole do I need to mount this gauge?

Answer: You need a 52mm or 2-inch diameter hole to mount the gauge.

Question: Does the package include a gauge holder or mounting pod?

Answer: No, the gauge holder is not included. You need to purchase it separately.

Monitor your vehicle's critical systems at a glance with this complete 52mm 7-color gauge set. It includes a tachometer, boost gauge, water temperature gauge, oil temperature gauge, oil pressure gauge, voltmeter, air-fuel ratio gauge, and exhaust temperature gauge. Designed for 12-volt gasoline vehicles, this set gives you the data you need to drive with confidence.

Each gauge features a clear, bright LED backlight that you can switch between 7 different colors using the button on the lens. The high-speed stepper motor provides a quick response, and an alarm function triggers a flashing red backlight to alert you to potential issues. The set includes sensors for the boost, water temperature, oil temperature, oil pressure, and exhaust temperature gauges.

Please note that the air-fuel ratio gauge does not include a sensor and requires a separate purchase. It is suitable for narrow band oxygen sensors only. The sensor thread size is 1/8ZG. The set also includes installation instructions in English. After receiving the gauge, it is normal for the pointer not to display zero until it is powered on.

Key Features and Benefits

- High-speed stepper motor that provides a quick and accurate response to changes in your vehicle's systems.

• Adjustable 7-color LED backlight that lets you personalize the look of your gauges to match your interior or preference.

• Alarm function with flashing red backlight that gives you a clear visual warning when a reading goes outside the normal range.

• Complete set of 8 gauges that allows you to monitor engine RPM, boost, temperatures, oil pressure, voltage, and air-fuel ratio from one place.

• Includes sensors for most gauges that simplifies installation and ensures accurate readings from key engine components.

Who Is This For

- Car enthusiasts who want to keep a close eye on their engine's performance and health during daily driving or track days.

• DIY mechanics who are upgrading their vehicle's dashboard with a complete set of professional-grade monitoring gauges.

• Owners of 12-volt gasoline vehicles with 1-8 cylinder engines who need a reliable way to monitor boost, temperature, and oil pressure.

Usage Scenario

Mike had just finished installing a turbo kit on his project car. He needed to keep a close watch on his boost levels and engine temperatures to make sure everything was running safely. After mounting this 7-gauge set on his dashboard, he could see his boost pressure, water temp, and oil pressure all at once. When his oil temperature started climbing during a spirited drive, the red flashing backlight caught his attention immediately, giving him time to ease off and let the engine cool down.

Micro Comparison

Unlike basic single-function gauges that only show one reading, this 8-piece set gives you a complete picture of your engine's condition. The 7-color backlight and alarm function add a level of customization and safety that standard gauges lack. This set offers a convenient all-in-one solution for anyone who wants to upgrade their dashboard without buying each gauge separately.

Specifications

Material: Metal + Plastic

Gauge Diameter: 52 mm / 2.0 in

Gauge Height: 53 mm / 2.1 in

Gauge Length: 58 mm / 2.3 in

Item Weight: 0.4 kg / 14.1 oz

Tachometer Range: 0~10x1000 RPM

Boost Gauge Range: -30~30 PSI

Water Temperature Range: 40~140°C / 104~284°F

Oil Temperature Range: 40~140°C / 104~284°F

Oil Pressure Range: 0~100 PSI

Voltmeter Range: 8~18V

Air Fuel Ratio Range: 20:1~10:1

Exhaust Temperature Range: 3~13x100°C / 37~55°F

Sensor Thread Size: 1/8ZG

Fitment: 12-volt gasoline vehicles (tachometer suitable for 1-8 cylinder cars only)

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x Tachometer (with sensor)

• 1 x Boost Gauge (with sensor)

• 1 x Water Temperature Gauge (with sensor)

• 1 x Oil Temperature Gauge (with sensor)

• 1 x Oil Pressure Gauge (with sensor)

• 1 x Voltmeter

• 1 x Air Fuel Ratio Gauge (sensor not included)

• 1 x Exhaust Temperature Gauge (with sensor)

• 1 x Installation Instructions (English)

Why You Will Love It

You will love the peace of mind that comes from seeing all your engine's vital signs in one place. The ability to switch the backlight to any of 7 colors lets you match your car's style. The alarm feature gives you an extra layer of protection against unexpected problems.

Questions and Answers

Question: Does this gauge set work with diesel engines?

Answer: No, this set is designed for 12-volt gasoline vehicles only. The tachometer is suitable for 1-8 cylinder cars.

Question: Does the air-fuel ratio gauge come with a sensor?

Answer: No, the air-fuel ratio gauge does not include a sensor. You will need to purchase it separately. It is suitable for narrow band oxygen sensors only.

Question: Can I change the backlight color on each gauge?

Answer: Yes, each gauge has a button on the lens that lets you switch between 7 different LED backlight colors.

Question: What thread size are the sensors?

Answer: The sensor thread size is 1/8ZG.

Question: Why is the gauge pointer not at zero when I first receive it?

Answer: It is normal for the pointer not to display zero until the gauge is powered on. Once connected, it will function correctly.

Keep your vehicle's electrical system in check with this 52mm car voltmeter. It displays voltage from 8 to 16 volts, giving you a clear readout of your battery and charging system health. The black metal housing and simple dial design fit well in most dashboards or gauge pods.

This mechanical volt gauge connects directly to your 12V DC system. It helps you spot problems like a weak battery or a failing alternator before they leave you stranded. The 2 inch diameter is a standard size that fits many aftermarket gauge panels.

Built with a metal body and a sensitive internal mechanism, this gauge provides steady and accurate readings. It is a practical upgrade for anyone who wants to monitor their car's electrical condition at a glance.

Key Features and Benefits

- 52mm / 2 inch diameter that fits standard gauge pods and dash openings

• 8-16V DC measurement range that covers most car electrical systems

• Black metal construction that resists wear and matches interior styles

• High sensitivity movement that provides accurate voltage readings

• Easy installation with included mounting accessories

Who Is This For

- Car owners who want to monitor battery and alternator health

• DIY mechanics installing aftermarket gauge panels or pods

• Off-road and 4x4 drivers who need to track electrical load

• Anyone replacing a broken or inaccurate factory voltmeter

Usage Scenario

Mark noticed his truck was hard to start on cold mornings. He installed this voltmeter in a spare dash pod and saw the voltage drop below 12V while cranking. After replacing the battery, the gauge showed a steady 14.2V while driving, confirming the alternator was charging correctly. Now he checks the gauge every time he starts the engine.

Micro Comparison

Unlike digital voltmeters that can be hard to read in direct sunlight, this analog gauge uses a clear dial with a moving needle for quick visual checks. It does not require a separate sensor or wiring harness. The mechanical design is straightforward and reliable for daily use.

Specifications

Color: Black

Material: Metal

Diameter: 52mm / 2 in

Voltage: 12V DC

Quantity: Pack of 1

Package Includes

- 1 x Volt Gauge

• Some installation accessories (instructions not included)

Why You Will Love It

You get a direct window into your car's electrical health without complex wiring or digital screens. The simple black design blends in without looking aftermarket. It gives you the confidence to catch charging problems early.

Questions and Answers

Question: Will this voltmeter work on a 24V system?

Answer: No, this gauge is designed for 8-16V DC systems only. It works on standard 12V car electrical systems.

Question: Does this gauge need a separate power wire?

Answer: Yes, you need to connect it to a 12V power source and a ground for it to function.

Question: What is the mounting hole size needed?

Answer: The gauge body is 52mm in diameter. You need a mounting hole of about 52mm / 2 inches.

Question: Does it come with a wiring diagram?

Answer: No, instructions are not included. Basic wiring knowledge is recommended for installation.

Question: Is the face illuminated?

Answer: The product specifications do not mention a backlight. The gauge uses a mechanical needle and printed dial for reading.

Question: Can I install this in a boat or RV?

Answer: Yes, as long as the electrical system is 12V DC and the gauge fits the panel opening.

Keep an eye on your engine's boost pressure with this 2" 52mm electronic boost gauge. It covers a display range from -1 to 2 Bar (-30 to 30 PSI) and includes a programmable alarm to warn you when pressure goes outside your set limits. The 7-color backlight lets you match the gauge to your dashboard style.

This gauge is built for universal fitment on any 12V vehicle. The digital readout gives you precise pressure information at a glance, helping you monitor turbo or supercharger performance. The alarm function adds an extra layer of protection by alerting you to potentially harmful pressure levels.

You can change the backlight color directly from the gauge buttons. Whether you prefer a subtle white or a vibrant red, the choice is yours. This makes it easy to integrate the gauge into your existing interior lighting scheme without extra wiring or controllers.

The package includes everything you need for installation: the gauge itself, a boost sensor, a 6-foot PVC hose, a T-fitting, wiring, and an English manual. The sensor uses a standard 1/8 NPT thread, which is common on many aftermarket boost ports.

Key Features and Benefits

- Electronic boost gauge with a display range of -1~2 Bar / -30~30 PSI that provides accurate pressure readings for your forced induction system.

• Programmable alarm range from -1.3~2 Bar / 20~30 PSI that alerts you when boost pressure goes outside safe operating limits.

• 7-color changeable backlight that lets you customize the gauge appearance to match your vehicle's interior lighting.

• 52mm gauge diameter that fits standard gauge pods and mounting locations.

• 12V power compatibility that works with most car electrical systems for easy installation.

Who Is This For

- Car enthusiasts who have installed a turbocharger or supercharger and need to monitor boost pressure.

• DIY mechanics looking for an affordable and reliable boost gauge to add to their vehicle.

• Drivers who want a visual and audible warning system to protect their engine from over-boost conditions.

• Anyone upgrading their car's interior with a modern, multi-color gauge that matches their personal style.

Usage Scenario

Mark just finished installing a turbo kit on his daily driver. He needed a way to keep track of boost pressure without constantly looking down at a small display. He mounted this 52mm gauge in a pillar pod, set the alarm to sound at 25 PSI, and now he can focus on the road. The bright 7-color backlight makes it easy to read at night, and the alarm gives him peace of mind that he won't accidentally over-boost his engine.

Micro Comparison

Many mechanical boost gauges rely on a simple needle and tube, which can vibrate or lag. This electronic gauge gives you a precise digital readout and adds a programmable alarm that mechanical gauges often lack. The 7-color backlight also offers more customization than single-color gauges, letting you match your dashboard or mood.

Specifications

Display Range: -1~2 Bar / -30~30 PSI

Alarm Range: -1.3~2 Bar / 20~30 PSI

Gauge Diameter: 52 mm / 2 in

Item Dimensions: 57 mm x 52 mm x 53 mm / 2.2 in x 2.0 in x 2.1 in

Item Weight: 0.25 kg / 8.8 oz

Material: Plastic

Power: 12V

Sensor Mounting Thread: 1/8 NPT

Placement on Vehicle: Front

Package Includes

- 1 x Boost Gauge

• 1 x Boost Sensor

• 1 x PVC Hose (6 Feet)

• 1 x T-Fitting

• 1 x Wire

• 1 x English Manual

Why You Will Love It

You get a precise electronic boost reading with a customizable look that fits your car's interior. The built-in alarm acts as a safety net for your engine, giving you confidence during spirited driving. It is a straightforward upgrade that adds both function and style to your dashboard.

Questions and Answers

Question: Will this gauge work on a diesel truck?

Answer: Yes, it works on any 12V vehicle, including diesel trucks, as long as you have a boost source.

Question: How do I change the backlight color?

Answer: You can cycle through the 7 colors by pressing the button on the gauge face.

Question: What does the alarm sound like?

Answer: The alarm is an audible beep that activates when pressure goes outside your set alarm range.

Question: Can I use this gauge with a vacuum line?

Answer: Yes, it reads both vacuum and boost, so it works for naturally aspirated and forced induction engines.

Question: Is the sensor included?

Answer: Yes, the package includes the boost sensor with a 1/8 NPT thread.

Keep a close eye on your vehicle's battery health with this easy-to-read 52mm voltmeter gauge. Designed for 12V gasoline cars, it shows your voltage level clearly with a bright white LED display, helping you spot potential charging issues before they leave you stranded.

This 2 inch gauge fits neatly into standard gauge pods or dash openings. It monitors a range of 8 to 16 volts, giving you a real-time reading of your car's electrical system. The black shell blends in with most interiors, while the white backlight ensures visibility day or night.

Installation is straightforward. The gauge connects to your vehicle's power source and provides instant feedback on your battery and alternator performance. Whether you drive a daily commuter or a weekend project car, this simple upgrade adds a layer of protection and awareness to your driving experience.

Made from durable plastic, this gauge is built to handle the vibrations and temperature changes found under the hood or inside the cabin. It's a practical tool for any driver who wants to stay informed about their car's electrical health.

Key Features and Benefits

- 52mm standard size that fits most gauge pods and dash openings for a clean, professional look

• White LED backlight that provides clear visibility in low light and nighttime driving conditions

• 8-16V measurement range that monitors both battery and alternator output to catch problems early

• Black plastic shell that matches common interior trims and resists daily wear

• Simple 12V connection that makes installation quick and accessible for DIY car enthusiasts

Who Is This For

- Daily drivers who want to monitor their battery health and avoid unexpected breakdowns

• Car hobbyists and DIY mechanics adding functional gauges to their custom dashboard setups

• Owners of older gasoline cars who want a simple voltage check without complex wiring

• Anyone installing a new audio system or accessories who needs to keep an eye on electrical load

Usage Scenario

Mark noticed his car's headlights dimming slightly at stoplights. Rather than guessing, he installed this 52mm voltmeter in an empty dash slot. Now, he sees the exact voltage drop when the engine idles. A quick glance tells him the alternator is charging properly, and when the needle stays steady, he knows his battery is in good shape. It's a small addition that gives him real peace of mind on every drive.

Micro Comparison

Unlike larger or more complex multi-function gauges, this voltmeter is dedicated to one job: showing your car's voltage clearly and reliably. It's smaller than a typical 2 1/16 inch gauge, making it a good fit for tight spaces. The white LED is easier to read at night than standard green or amber lights, and the simple 12V connection means you don't need a professional mechanic to install it.

Specifications

- Material: Plastic

• Size: 52mm / 2.0 in diameter

• Weight: 130g / 4.6 oz

• Voltage Range: 8-16V

• Backlight: White LED

• Working Voltage: 12V

Package Includes

- 1 x 52mm Voltmeter Gauge

Why You Will Love It

You get a clear, real-time view of your car's electrical system without complicated wiring or expensive tools. The simple design fits right into your dashboard, and the bright white display makes checking your voltage effortless. It's a small investment that helps you catch battery or alternator problems early, saving you from unexpected repair bills.

Questions and Answers

Question: Will this gauge work on a diesel car?

Answer: This gauge is designed for 12V gasoline cars. It may not be compatible with diesel vehicles or 24V electrical systems.

Question: How do I install this voltmeter?

Answer: Connect the positive and negative wires to your car's 12V power source. The gauge will then display your battery voltage in real time.

Question: Is the backlight always on?

Answer: The white LED backlight is active when the gauge receives power. It stays on as long as your car's electrical system is on.

Question: Can I use this gauge on a motorcycle?

Answer: It may work on a 12V motorcycle, but you will need to check the mounting size and ensure the gauge fits your handlebar or dash space.

Question: What does the gauge read when the engine is off?

Answer: With the engine off, the gauge shows your battery's resting voltage. A healthy battery typically reads around 12.4 to 12.7 volts.

Monitor your engine's vital signs with this 52mm multifunctional car gauge set. It combines a tachometer, boost gauge, water temperature gauge, oil temperature gauge, oil pressure gauge, exhaust temperature gauge, voltmeter, and air-fuel ratio gauge all in one LCD digital display. You get a complete picture of your vehicle's performance at a glance.

This gauge set is designed for 12 volt gasoline vehicles and works with 4, 6, or 8 cylinder engines. The LCD screen offers 7 selectable backlight colors, so you can match the look to your interior or personal style. Each gauge comes with the necessary sensor, except for the air-fuel ratio gauge which requires a separate purchase and is compatible only with narrow band oxygen sensors.

The sensor thread size is 1/8ZG, and an English installation instruction is included to help you get set up. The gauge housing measures 52mm in diameter with a height of 38mm, making it a standard fit for most gauge pods or dash mounts.

Whether you are tuning for performance or just keeping an eye on engine health, this gauge set gives you the data you need in a clear, customizable format.

Key Features and Benefits

- 7 color LCD backlight that you can change with a button on the gauge, so you can personalize the display to match your vehicle's interior.

• Measures and displays RPM, boost, water temp, oil temp, oil pressure, exhaust temp, voltage, and air-fuel ratio, giving you complete engine monitoring from one unit.

• 52mm standard gauge size that fits most universal gauge pods and mounting kits, making installation straightforward.

• Includes sensors for boost, water temp, oil temp, oil pressure, and exhaust temp, so you have everything you need for a full setup.

• Suitable for 4, 6, and 8 cylinder 12V gasoline vehicles, covering a wide range of cars and trucks.

Who Is This For

- Car enthusiasts who want to monitor multiple engine parameters without installing separate gauges for each reading.

• DIY mechanics and tuners who need real-time data on boost pressure, temperatures, and voltage during performance tuning or daily driving.

• Owners of 12V gasoline vehicles with 4, 6, or 8 cylinder engines looking to upgrade their dashboard with a modern digital display.

Usage Scenario

Mark had just finished installing a new turbo kit on his project car. He needed a reliable way to keep an eye on boost levels, exhaust temperature, and oil pressure all at once. After mounting this 52mm gauge in his dash, he could cycle through each reading with a quick glance. On his first test drive, he noticed the exhaust temp climbing faster than expected and backed off the throttle in time to avoid damage. The gauge gave him the confidence to push his setup further, knowing he could spot issues before they turned into problems.

Micro Comparison

Unlike single-function analog gauges that require multiple pods and wiring harnesses, this digital display combines eight key readings into one compact 52mm unit. You get a cleaner dashboard layout with less clutter, and the 7-color backlight lets you match the look to your other electronics. The included sensors for most functions also save you from buying them separately, making this a more complete solution for comprehensive engine monitoring.

Specifications

Material: LCD+Metal+Plastic

Item Length: 52mm / 2.0 in

Item Width: 52mm / 2.0 in

Item Height: 38mm / 1.5 in

Item Weight: 0.35kg / 12.3 oz

Tachometer: 0~10x1000RPM

Boost Gauge: -30~35PSI

Water Temperature Gauge: 40~140°C / 104~284°F

Oil Temperature Gauge: 50~150°C / 122~302°F

Oil Pressure Gauge: 0~150PSI / 0~10Bar

Voltmeter: 8~18V

Air Fuel Ratio Gauge: 20:1~10:1

Exhaust Temperature Gauge: 2~12×100°C / 36~248°F

Number of Cylinders: 4/6/8

Placement on Vehicle: Front

Sensor Thread Size: 1/8ZG

Compatibility: 12V gasoline vehicles only

Package Includes

- 1 x Gauge (your choice of function)

• 1 x Sensor (included with boost, water temp, oil temp, oil pressure, and exhaust temp gauges)

• 1 x English Installation Instruction

Why You Will Love It

You get a complete engine monitoring system in a single, space-saving gauge. The customizable backlight lets you tailor the look to your car, and the clear digital readout makes it easy to spot changes at a glance. Whether you are tuning for power or just want peace of mind on the road, this gauge gives you the data you need without cluttering your dash.

Questions and Answers

Question: Does this gauge work with diesel engines?

Answer: No, it is designed for 12 volt gasoline vehicles only.

Question: Is the air-fuel ratio gauge included with a sensor?

Answer: No, the air-fuel ratio gauge does not come with a sensor. You need to purchase an oxygen sensor separately, and it is only compatible with narrow band oxygen sensors.

Question: What size hole do I need to mount this gauge?

Answer: You need a 52mm diameter mounting hole, which is standard for most gauge pods and dash kits.

Question: Can I change the backlight color while driving?

Answer: Yes, you can change the color by pressing the button on the gauge. It is easy to do on the go.

Question: Does the tachometer work on a 3-cylinder engine?

Answer: No, the tachometer is only suitable for 4, 6, or 8 cylinder engines.

Monitor your engine's vital signs with a single 60mm gauge that reads oil pressure, water temperature, oil temperature, voltage, turbo boost, vacuum, and RPM. This customizable auto meter features a 64-color LED backlight so you can match your dashboard style or change the look whenever you want.

Built for durability, this gauge uses a moving-magnet needle drive that resists vibration and wear. It works reliably in demanding environments like boats, construction machinery, generators, engines, and agricultural equipment. The instrument includes polarity protection and over-voltage protection, and it continues to operate normally between 10V and 16V. The housing is designed to be waterproof, anti-fog, and anti-vibration for long-term use in humid conditions.

Choose from ten available gauge types in the same 60mm series: turbo boost (bar or kPa), water temperature, oil temperature, oil pressure, voltmeter, air fuel ratio, exhaust gas temperature, vacuum, and tachometer. Each gauge has a black background and a backlight that cycles through 64 colors you can change at will. The fixing dimension is 60mm or 2-1/2 inches, so it fits standard gauge pods and panels.

Whether you are upgrading a street car, tuning a performance build, or adding instrumentation to a work vehicle, this gauge gives you accurate readings and a personalized look. The package includes the gauge and an instruction manual for easy installation.

Key Features and Benefits

- Moving-magnet needle drive that provides good endurance and resists vibration for consistent readings

• 64-color LED backlight that lets you change the dashboard ambiance to match your style

• Polarity protection and over-voltage protection that keep the gauge working safely between 10V and 16V

• Waterproof, anti-fog, and anti-vibration design that handles humid and harsh environments

• Standard 60mm / 2-1/2 inch fixing dimension that fits most gauge pods and panels

Who Is This For

- Car enthusiasts who want to monitor engine parameters like oil pressure, water temp, and boost pressure

• Boat owners who need durable gauges that resist moisture and vibration

• Performance tuners who require accurate readings for turbo boost, RPM, and voltage

• Equipment operators who use generators, engines, or agricultural machinery in humid conditions

Usage Scenario

Mark drives a modified sedan and likes to keep an eye on his engine during spirited drives. He installed the turbo boost gauge in his center console pod. Now he can see boost pressure climb as he accelerates and watch water temperature stay steady even in stop-and-go traffic. The 64-color backlight lets him switch from blue to red to match the interior lights at night. He feels more confident pushing the car because he knows exactly what each gauge is telling him.

Micro Comparison

Many universal gauges only offer one or two functions and a single backlight color. This gauge gives you multiple measurement options in one 60mm size, plus a 64-color LED that you can change anytime. The moving-magnet mechanism and protective features make it more reliable in wet or vibrating environments compared to basic needle gauges.

Specifications

Diameter: 60mm / 2-1/2 in

Material: Plastic shell

Backlight: 64 colors, replaceable at will

Background color: Black

Operating temperature: -30°C to +60°C / -22°F to +140°F

Storage temperature: -30°C to +80°C / -22°F to +176°F

Protection rating: IP67

Indicating range: 8-18V

Operating voltage: 10V-16V DC (12V vehicles only)

Fixing dimension: 60mm / 2-1/2 in

Available Gauge Types (same 60mm series)

• Turbo Gauge (Bar): 0 BAR - 10 BAR

• Water Temp Gauge: 20 - 120 Celsius

• Oil Temp Gauge: 50 - 150 Celsius

• Oil Pressure Gauge: 0 BAR - 10 BAR

• Turbo Gauge (kPa): 0 - 300 kPa

• Volt Meter: 8V - 18V

• Air Fuel Ratio Gauge

• Exhaust Gas Temp Gauge: 2 - 12 x 100 Celsius

• Vacuum Gauge: 100 kPa

• Tachometer: 0 - 9 x 1000 RPM

Package Includes

- 1 x Gauge

• 1 x Instruction manual

Why You Will Love It

You get a professional-grade gauge that tracks multiple engine parameters without cluttering your dashboard. The 64-color LED backlight lets you personalize the look every day. It is built to last in tough conditions, so you can rely on it mile after mile.

Questions and Answers

Question: What gauge types are available in this 60mm series?

Answer: You can choose from turbo boost (bar or kPa), water temp, oil temp, oil pressure, voltmeter, air fuel ratio, exhaust gas temp, vacuum, and tachometer.

Question: Can I change the backlight color after installation?

Answer: Yes, the backlight has 64 colors that you can replace at will. The background is black.

Question: What is the operating voltage range for this gauge?

Answer: It works between 10V and 16V DC and is designed for 12V vehicles only.

Question: Is this gauge waterproof?

Answer: It has an IP67 protection rating and is designed to be waterproof, anti-fog, and anti-vibration.

Question: What is the fixing dimension for installation?

Answer: The gauge has a 60mm / 2-1/2 inch fixing dimension that fits standard gauge pods and panels.