Key Features

• Brass Construction — It is mainly made of brass, is wear-resistant, has strength and impact resistance, and is not easy to deform even after long-term use.
• Ball Valve Seal — The side-mounted ball valve uses a 4-point, 1 rotary switch, and integrated O-rings that help prevent refrigerant from leaking out of the air conditioning system during maintenance.
• Quick Couplers — A red high-pressure coupler (16 mm (0.63 in) inner diameter) and a blue low-pressure coupler (13 mm (0.51 in) inner diameter) are used for replacing vehicle A/C bulb cores.
• Wide Compatibility — It works with R134a, R1234yf and R22 automotive AC systems, standard bulbs in 1/4 inch, 5/16 inch and 3/8 inch refrigeration lines, and various valve cores of JRA valves and screwdriver valves.

Product Specifications

• Material: Mainly made of brass
• Compatible refrigerants: R134a, R1234yf, R22 automotive AC systems
• Compatible line and bulb sizes: Standard bulbs in 1
• Compatible valve cores: Various valve cores of JRA valves and screwdriver valves
• Package details: 2 mosquito killers (high pressure/low pressure), 2 R1234yf couplers (high pressure/low pressure), 2 R134a bulb cores, 2 R22 valve cores, 2 large O-rings, 2 small O-rings

What It Is / How It Works

This R134a auto air conditioner valve core removal tool is a hand tool for working on the service valves of automotive air conditioning systems. Tools of this type are used to remove and replace valve cores and to connect couplers to the air conditioning lines.

Who It's For / Use Cases

Automotive air conditioning tools like this suit people who service car A/C systems, including home mechanics and shop technicians who need to replace valve cores or work on refrigerant lines.

How to Use / Care

1. Use the tool to remove and replace valve cores in R134a and R1234yf automotive AC systems.
2. Choose the red high-pressure coupler or the blue low-pressure coupler to match the side of the system you are working on.

How to Choose

Start with the refrigerant your vehicle uses, such as R134a, R1234yf or R22, and check that the tool matches it. Next, match the line and bulb sizes you need to work on, which are 1/4 inch bulbs and 5/16 inch or 3/8 inch refrigeration lines. Look at the valve core types you service, since the tool lists compatibility with JRA valves and screwdriver valves.

Frequently Asked Questions

Which refrigerants is it compatible with?
It is compatible with R134a, R1234yf and R22 automotive AC systems.

What is it made of?
It is mainly made of brass. It is wear-resistant and has strength and impact resistance.

What does the package include?
The package has 2 mosquito killers (high pressure/low pressure), 2 R1234yf couplers (high pressure/low pressure), 2 R134a bulb cores, 2 R22 valve cores, 2 large O-rings and 2 small O-rings.

Which bulb and line sizes does it fit?
It works with standard bulbs in 1/4 inch and with 5/16 inch and 3/8 inch refrigeration lines.

Key Features

• Built-In Gauge — A gauge is fitted to the hose so readings stay easy to view during use.
• 1/4-Inch SAE Port — The fitting uses a 1/4" SAE port.
• Wide Pressure Scale — The gauge scale reads -30-250PSI.

Product Specifications

• Material: Copper + Rubber
• Port specifications: 1/4" SAE Port
• Pressure gauge KG: -76-17.5 Kg/cm2
• Research pressure: -30-250PSI
• Powered: Non-powered
• Condition: Brand New
• Package contents: 1 x Refrigerant Gauge Hose; 1 x R134A Bottle Opener; 1 x Self-locking Connector

What It Is / How It Works

Refrigerant gauge hoses are charging lines used in car air conditioning service. They connect a refrigerant can to the vehicle's system and carry a pressure gauge so the reading can be seen during charging.

This refrigerant gauge hose is built for R134A refrigerant and has a built-in gauge. Its outer ring reads in KG/CM2 and its middle ring shows supply pressure in PSI.

Who It's For / Use Cases

Refrigerant gauge hoses suit people doing their own car air conditioning top-ups, and workshops that service R134A systems. They suit anyone who needs to watch system pressure while adding refrigerant.

How to Use / Care

1. Use the hose to add R134A refrigerant to a vehicle air conditioning system.
2. Keep the gauge in view during use, since it is built to be read while the refrigerant is being added.
3. Read the outer ring in KG/CM2 and the middle ring for supply pressure in PSI.

How to Choose

Start with the fitting. This hose uses a 1/4-inch SAE port, so compare it with the service port on the vehicle before you buy. Next, look at the pressure scale. The gauge reads -30-250PSI, which covers the range used for refrigerant charging. Finally, consider how you will use the hose, since it is non-powered and needs no battery or power source.

Frequently Asked Questions

What refrigerant is this hose for?
It is for R134A refrigerant. The hose is used to add R134A refrigerant to vehicle air conditioning systems.

Is the gauge hose powered?
No. It is non-powered, so there is no battery or plug to connect.

What comes in the package?
The package includes one refrigerant gauge hose, one R134A bottle opener and one self-locking connector.

What is the hose made of and what port does it use?
The hose is made of copper and rubber. It uses a 1/4" SAE port and its gauge reads -30-250PSI.

Key Features

• Precise Fit — It is designed to fit the R36S, so a worn or broken D-pad can be swapped out easily.
• Responsive Feel — It gives a more responsive tactile feel, so each press registers clearly during gameplay.
• Compact Size — It measures 2.2x2.2x0.5 cm and is sized for a snug fit.
• Built for Regular Use — It is built to withstand regular use.

Product Specifications

• Part Name: D-pad
• Dimensions: 2.2x2.2x0.5 cm
• Color: White, black, gray, blue, orange, red

What It Is / How It Works

This D-pad replacement kit is a small replacement part for the R36S. It measures 2.2x2.2x0.5 cm.

Replacement D-pads are small directional controls on handheld game devices. Swapping one in is a common way to restore a worn pad without replacing the whole device.

Who It's For / Use Cases

Replacement D-pads suit owners of the R36S whose directional pad has worn down or broken. People who would rather replace one small control than the whole handheld will find this type of kit useful, especially when they want the pad to feel responsive during regular gaming sessions.

How to Use / Care

1. Use it as a replacement D-pad, since it is built to withstand regular use.

How to Choose

Start with the device. This kit is made for the R36S, so confirm your handheld is that model before you order.

Next, compare the size. Check that the 2.2x2.2x0.5 cm dimensions match the pad you are replacing, since a snug fit depends on it.

Colour is a choice too. The kit lists white, black, gray, blue, orange and red, so pick the shade you prefer.

Frequently Asked Questions

Which device is this kit for?
It is made for the R36S. The part is designed to fit that device so a worn or broken D-pad can be swapped out.

What size is it?
It measures 2.2x2.2x0.5 cm and is sized for a snug fit.

Does it need a battery?
No. The kit has no battery and no power supply.

How does it feel when pressed?
It is made to give a more responsive tactile feel, so each press registers clearly during gameplay.

Key Features

• Long-Lasting Scent — The natural essential oil releases a steady fragrance for up to 20 days.
• Leak-Proof Solid Form — The solid form has no liquid to spill, so it is safe to hang near fabrics, papers, and other delicate surfaces.
• Raccoon Graphic Design — The raccoon graphic adds a playful, decorative touch to a car interior or room.

Product Specifications

• Material: Absorbent paper + natural essential oil
• Scent duration: About 20 days under normal use

What It Is / How It Works

This fragrant paper air freshener is a hanging solid perfume made of absorbent paper and natural essential oil. It releases a gentle scent into the space around it without any liquid or electric parts.

Who It's For / Use Cases

Air fresheners of this type suit people who want a simple, no-mess way to keep a small space smelling fresh. They are a practical choice for anyone who prefers a solid fragrance over sprays or liquids, and for gift givers looking for a small, decorative present for animal lovers or car enthusiasts.

How to Use / Care

1. Hang it where you like, in a car, closet, bedroom, bathroom, or office.
2. Its simple hanging design lets you place it almost anywhere in a small space.
3. Expect the fragrance to last about 20 days under normal use.

How to Choose

Choose a spot based on where you want the scent: a car for the daily commute, or a closet, bedroom, or bathroom for a lighter fragrance. If you want to avoid liquids or sprays, the solid form is a simple option. Keep it away from painted or leather surfaces, and place it where it will not touch them directly.

Frequently Asked Questions

How long does the scent last?
The fragrance lasts about 20 days under normal use.

Can I use it in my car?
It is designed for cars as well as closets, bedrooms, offices, and other small spaces.

Does it need batteries or electricity?
It is a simple hanging solid perfume with no electric parts, so no batteries or power are needed.

Is it safe to hang near leather or painted surfaces?
The fragrant tablet should not come into direct contact with paint or leather surfaces.

What is it made of?
It is made from absorbent paper and natural essential oil.

Key Features

• Vinyl Build — This raccoon decal is cut from vinyl, a material commonly used for car graphics because it holds up to sun and weather.
• Sticker Has Adhesive — The sticker has adhesive on the back, so you can peel it off and press it into place. It also removes cleanly without leaving residue.
• Cartoon Look — The raccoon design has a cartoon style, giving your car a playful, personalized touch.
• Paint Protection — Beyond decoration, this decal can shield your car's paint from everyday wear and help hide existing scuffs and scratches.
• Sticker Can Be — This sticker can be customized if you want a different design or size.

Product Specifications

• Material: Vinyl
• Design: Cartoon raccoon
• Sticker Placement: The Whole Body
• Type: Glue Sticker

What It Is / How It Works

This is a raccoon-themed car decal sticker, designed to be applied to the exterior of your vehicle. It is made of vinyl and features a cartoon raccoon design, adding a fun and personalized element to your car's appearance.

Who It's For / Use Cases

Car decals like this one are a popular way for drivers to express their personality on the road. They suit anyone who wants to give their vehicle a custom look without committing to a permanent paint job. Raccoon fans, drivers who enjoy whimsical details, or anyone looking to cover up minor blemishes on their car's body will find this sticker a simple and removable option.

How to Use / Care

1. Clean the area where you plan to place the sticker.
2. Peel the backing paper off the sticker.
3. Position the sticker on the car and press it down.
4. Use a squeegee or similar tool to smooth out any air bubbles.
5. Carefully remove the transfer film.
6. Allow the sticker to set. Do not wash the car for three days after application.

How to Choose

When picking a car decal, consider the size relative to your vehicle and where you want to place it. Since this sticker is customizable, you can request a different size or design if the standard options don't fit your needs.

Frequently Asked Questions

What material is this raccoon car sticker made of?
It is made of vinyl, which is a common material for car decals because it is durable and weather-resistant.

What sizes are available for this sticker?
The sticker comes in two sizes: 20 × 10 cm (7. 9 × 3. 9 in) and 40 × 20 cm (15. 7 × 7. 9 in).

Will this sticker leave residue when removed?
The sticker is designed to be removed without leaving residual adhesive or damaging the surface. Heating it slightly can make removal even easier.

Are there any care instructions after applying the sticker?
After application, avoid exposing the sticker to direct sunlight for 24 hours and do not wash the car for three days.

Key Features

• Sticker Can Be — This sticker can be personalized, letting you choose the numbers and figures that fit your style.
• Easy Application — The package includes one car sticker with figures 0-9, racing numbers, and a helmet design, made of PVC material that is waterproof and sunscreen.

Product Specifications

• Material: PVC
• Size: 10CM / 15CM / 20CM / 25CM / 30CM
• Package Includes: 1 x Car Sticker

What It Is / How It Works

This is a vinyl car sticker featuring numbers 0-9, racing numbers, and a helmet graphic. It is designed for decorating vehicles, motorcycles, or other surfaces with a racing theme.

Who It's For / Use Cases

Car stickers like this suit vehicle owners who want to add a personal touch to their car, motorcycle, or helmet. They are also popular among racing enthusiasts and anyone looking for a quick and economical way to customize their ride.

How to Use / Care

1. Clean the surface where you plan to apply the sticker and keep it dry.
2. Determine the placement, then slowly apply the sticker while scraping with a tool or credit card and peeling away the backing paper.
3. After application, press firmly again to ensure good adhesion and remove any bubbles.

How to Choose

When choosing a car sticker, consider the size that best fits your vehicle or helmet.

Frequently Asked Questions

What sizes are available for this sticker?
The sticker comes in sizes 10CM, 15CM, 20CM, 25CM, and 30CM.

Is the sticker waterproof?
Yes, the sticker is made of PVC material that is waterproof and sunscreen, so it can withstand outdoor conditions.

Key Features

• Waist or Wrist Carry — It can be hung at the waist or set on the wrist to help you avoid forgetting your keys.
• Decorative Key Accessory — It can be hung on the key to decorate it, and it can also be used for other purposes.

Product Specifications

• Package Quantity: 1 piece

What It Is / How It Works

This keychain is a small key accessory from JDM RACING, sold as one piece. Keychains are generally looped or clipped onto a key ring so that a bunch of keys stays together and is easier to find in a bag or pocket.

Who It's For / Use Cases

Keychains suit people who carry several keys every day and want them grouped and easier to spot. Shoppers who like to personalize their keys often choose a keychain for its decorative look. People who prefer keys close to hand may find the waist or wrist carry option useful when they are on foot or moving between tasks.

How to Use / Care

1. Hang it on your key to decorate the key.
2. Hang it at the waist or set it on the wrist to keep your keys close.
3. Use it for other purposes where a small hanging accessory is useful.

How to Choose

Choose a keychain by how you carry your keys. If you want a decorative tag on a key ring, a simple hanging piece works well. If you want your keys near your hand, consider how the piece will sit at the waist or on the wrist. Compare the size of the piece with the key or bag it will hang from so it sits neatly alongside your other items.

Frequently Asked Questions

Can it be hung at the waist or worn on the wrist?
Yes. It can be hung at the waist or set on the wrist, which helps you avoid forgetting your keys.

How many pieces are in one order?
The package holds one piece, so each order is a single keychain.

Is it only for decoration?
It can be hung on the key to decorate it, and it can also be used for other purposes, such as a small hanging accessory wherever one is useful.

Key Features

• Billet CNC Aluminum — The gimbal body is machined from billet CNC aviation-grade aluminum.
• Non-Contact Hall Sensors — Non-contact Hall effect sensors support precise centering for accurate control.
• Quad Precision Bearings — Quad precision ball bearings give the stick a smooth, consistent feel.
• Adjustable Travel Angle — The vertical travel angle adjusts from 38° to 54°.

Product Specifications

• Model: Radiomaster AG01 NANO
• Weight: 32g(±0.3g)
• Size: 42 × 37 × 43 mm (1.65 × 1.46 × 1.7 in)
• Sensor type: Non-contact hall effect
• Vertical travel range: 38°- 54°
• Working voltage: DC 3.3V
• Power: No battery
• Temperature range: -20°C-85°C

What It Is / How It Works

These are AG01 NANO CNC Hall effect gimbals, stick-control modules sold as a pair for the smaller POCKET radio. Each gimbal is machined from billet CNC aluminum and uses non-contact Hall effect sensors in place of contact-based stick sensing. Gimbals of this type replace the stick assemblies on a compatible transmitter.

Who It's For / Use Cases

Radio gimbal sets of this kind suit hobbyists who own a compact RC transmitter and want to refresh the stick hardware. They also suit builders who enjoy adjusting control hardware by hand, since tension, centering mode and travel can be changed with the included tools.

How to Use / Care

1. Use these gimbals as the stick controls on a POCKET radio.

How to Choose

Choose gimbals by the transmitter they are meant for, since the set is designed for the smaller POCKET radio. Check the Size and Weight rows in Product Specifications against the space in your transmitter case. Travel angle and centering mode are the main settings to compare if you want a different stick feel.

Frequently Asked Questions

What is the vertical travel range?
The vertical travel angle adjusts from a minimum of 38° to a maximum of 54°. Adjusting the two marked positions changes the maximum travel of the gimbal for throttle and elevator.

Does it need batteries?
No. The power row reads No battery, and the working voltage is DC 3.3V.

What comes in the set?
The set includes 2 AG01 NANO gimbals, 2 L-shaped hexagon socket screwdrivers, 4 hard tension springs, 8 PB2*6 screws, 2 CM1.6*3 screws and 2 manuals.

Is it designed for the Pocket radio?
Yes. The AG01 NANO gimbal is designed for the smaller POCKET radio. Its footprint is 42 × 37 × 43 mm and it weighs 32g(±0.3g).

How do the centering and tension settings work?
Position ③ switches the gimbal between self-centering (elevator) mode and non self-centering mode. Position ④ adjusts the spring tension, and turning its screw clockwise increases tension while counterclockwise decreases it.

Key Features

• Dual-Antenna Design — The receiver uses a dual-antenna setup with telemetry power up to 100mw, and both the ER8G and ER8GV versions share this design.
• 8-Channel PWM Output — The receiver supports 8 PWM channels for servo outputs.
• Built-In Vario Sensor — The ER8GV version includes a built-in high-precision air pressure sensor (Vario).
• Automatic Voltage Telemetry — Telemetry reports external battery voltage or the built-in receiver voltage, switching between the two inputs automatically.
• Wi-Fi Updates and WEBUI — Firmware updates and configuration can run over Wi-Fi through the WEBUI interface.

Product Specifications

• Model: Radiomaster ER8GV
• Output channel: 8CH PWM
• Wireless protocol: ExpressLRS 3.3.0 pre-installed
• Telemetry power: maximum 100mw (LUA Adjustable)
• Power: DC 3.5 - 8.4V
• External Battery voltage detection range: DC 4.0 - 35V
• Antenna type: 20cm high sensitivity antenna
• Material: Composite Material
• Dimensions: 60 × 13.5 × 13 mm (2.36 × 0.53 × 0.51 in)
• Weight: 12 g (0.42 oz)
• Age Range: 14+y

What It Is / How It Works

This ExpressLRS receiver is designed for fixed-wing aircraft and gliders and is based on the ExpressLRS system. Receivers in this category pass control signals from a transmitter to the servos on a model, and their telemetry lets the pilot monitor voltage data from the transmitter.

Who It's For / Use Cases

Glider and fixed-wing pilots who want a compact receiver with several servo outputs and telemetry are the typical buyers for this type of unit. Pilots whose competitions ban variometers, or who simply do not need one, may prefer a receiver without the built-in sensor.

How to Use / Care

1. Power the receiver from a 1S LiPo receiver battery, which the product description lists for both the ER8G and ER8GV.
2. Choose the version that fits your build: the ER8G has the same functionality as the ER8GV without the built-in Vario, which suits competitions that prohibit Vario.
3. Use the receiver with ExpressLRS 3.3.0, which is pre-installed on the unit.

How to Choose

Start with whether you need a built-in Vario sensor, since the ER8G and ER8GV differ on that point. Next, check that your flight battery setup falls within the listed voltage detection range in Product Specifications. Finally, count the servo outputs your model needs and confirm the 20cm antenna suits your airframe layout.

Frequently Asked Questions

Does this receiver include a battery?
No. Batteries are not included, and the unit runs from a DC 3.5 - 8.4V power input listed in Product Specifications.

Which version has the Vario sensor?
The ER8GV has a built-in high-precision air pressure sensor (Vario). The ER8G uses the same functionality without that sensor, so it suits competitions that prohibit Vario.

How many servos can it drive?
The receiver can drive up to 8 servos and supports 8 PWM channels, with a compact and slim design for glider pilots.

Is the telemetry power adjustable?
Telemetry power reaches a maximum of 100mw and is adjustable through LUA.

How does voltage telemetry choose the input?
The receiver detects which voltage input to use automatically, and only one voltage input can be used at any given time. The external battery detection range is DC 4.0 - 35V.

Key Features

• Replaces Worn Switch Caps — The CNC anodized aluminum set replaces worn switch caps, and the anodized finish is available in different color options.
• One Piece Per Pack — Each pack contains one piece of the TX16S MK3 CNC upgrade parts.

Product Specifications

• Material: Metal
• Compatible models: TX16S MK3 MAX
• Package contents: 1 piece
• Power: No battery
• Age Range: 14+y

What It Is / How It Works

This CNC anodized aluminum switch set is a metal upgrade part for the TX16S MK3 MAX radio transmitter. It is made to replace worn switch caps and to change the look of the radio with an anodized color option.

Who It's For / Use Cases

Radio control hobbyists who handle their transmitter often may notice wear on the switch caps over time. Owners who want a metal switch replacement with a finish that matches their personal style may also find this type of upgrade useful. Buyers who want a simple, bolt-on style refresh for a radio they already use will find the purpose of this set straightforward.

How to Use / Care

1. Use it to replace worn switch caps on a compatible TX16S MK3 MAX transmitter.
2. Use it to customize the look of your radio by choosing the anodized color option you prefer.

How to Choose

Start by confirming that your radio is the TX16S MK3 MAX, since the set is made for that transmitter. Next, consider the finish, because the anodized aluminum comes in different color options that change how the radio looks. Metal hardware suits people who want a sturdier switch surface than plastic, and the one-piece pack is simple to plan around when you need a replacement set.

Frequently Asked Questions

Which transmitter does this set fit?
It is made for the TX16S MK3 MAX and replaces worn switch caps on that radio.

What is it made of?
It is made of metal, and the set is CNC anodized aluminum, so the finish is applied to the aluminum surface.

Does it need batteries?
No. The set has no battery and no power source, so it is a passive hardware part that you fit onto the radio.

How many pieces come in one pack?
Each pack contains one piece of the TX16S MK3 CNC upgrade parts.

Can I pick a color?
The anodized finish is offered in different color options, so you can choose the look that suits your radio.

Key Features

• Two-Piece Set — Each set contains two pieces, so both sides of the vehicle can be fitted from one pack.
• General-Purpose Fit — The pieces are made for general-purpose use rather than a single vehicle model.
• Right-Side Placement — The part location is the right side, which helps buyers match the piece to the correct side of the mirror.
• Identifiable Product Number — The product number MV157085 gives buyers a reference to match against the listing they intend to order.

Product Specifications

• Piece Count: 2 piece
• Applicable models: general purpose
• Product number: MV157085
• part location: Right

What It Is / How It Works

This two-piece car rearview mirror rain eyebrow set is a mirror-mounted accessory that sits above the rearview mirror to act as a rain and snow barrier and sun visor. The set is supplied as two pieces with a right-side part location, and it is intended for general-purpose use rather than one specific vehicle model.

Who It's For / Use Cases

Mirror rain eyebrows suit drivers who want a small shield above the rearview mirror to help keep rain and snow off the mirror face and reduce glare from low sun. They are also useful for owners who prefer a simple add-on rather than replacing the mirror itself, and for anyone who wants a spare set on hand.

How to Use / Care

1. Use the set as a rain and snow barrier above the rearview mirror.
2. Use it as a sun visor to shade the mirror from low-angle light.
3. Fit the right-side piece to the right side of the mirror.
4. Keep both pieces from the two-piece set together so a spare is available.

How to Choose

Check the piece count first, since a two-piece set covers both sides while a single piece covers one. Confirm the part location matches the side you need, and use the product number to match the exact listing. Buyers who want a general-purpose accessory rather than a model-specific part should look for that wording in the listing.

Frequently Asked Questions

How many pieces are in this set?
The set contains two pieces, so both sides can be covered from one pack.

Which side does the piece fit?
The part location is the right side, so the piece is intended for the right side of the mirror.

Is this made for a specific car model?
It is listed for general-purpose use rather than one vehicle model, so buyers should confirm the fit they need before ordering.

How can I identify the exact item?
The product number is MV157085, which can be used to match the listing.

What is the set used for?
It is a rearview mirror rain eyebrow that acts as a rain and snow barrier and sun visor above the mirror.

Key Features

• Self-Adhesive Fit — The brow attaches with a self-adhesive backing that peels and sticks onto the mirror housing.
• Rain Deflection — The brow is shaped to resist rain while you drive.
• Smog Reduction — The brow helps prevent smogs from forming on your side view mirror.
• Sight-Friendly Profile — The brow is designed not to affect your sight.
• PVC Construction — The brow is made from PVC in a black finish.

Product Specifications

• Material: PVC
• Colour: Black
• Sticker Placement: Internal
• Car accessory: Auto Parts

What It Is / How It Works

This car mirror rain brow is a self-adhesive visor that fits over the side rearview mirror housing. It is made from PVC in a black finish and is designed to resist rain while you drive, help prevent smogs on the mirror, and avoid affecting your sight. The brow peels and sticks onto the mirror housing.

Who It's For / Use Cases

Mirror rain brows suit drivers who want a simple add-on that helps keep rain and smogs off the side view mirror. They are a practical choice for daily commuters, highway drivers, and anyone parking outdoors who prefers a peel-and-stick accessory over a permanent modification.

How to Use / Care

1. Peel the self-adhesive brow and stick it onto your car.

How to Choose

Check that the brow is intended for your Skoda model before ordering, since the listing covers several Skoda names. Confirm the color and material match your mirror housing, and decide whether an internal sticker placement suits your setup. If you want a different logo or model, contact customer service about customization.

Frequently Asked Questions

How does the brow attach to the mirror?
The brow is self-adhesive. Peel and stick it onto your car.

What is the brow made of?
The brow is made from PVC and comes in a black finish.

Will the brow affect my view?
The brow is designed not to affect your sight.

Does the brow help with rain and smogs?
The brow is shaped to resist rain while you drive and helps prevent smogs on your side view mirror.

Which Skoda models does this brow fit?
The listing covers Skoda Octavia, Superb, Rapid, Fabia, Kamiq, Karoq, Kodiaq, and Yeti names. Check the Product Specifications and confirm your model before ordering.

Can I get a different logo or model?
Contact customer service about customizing the logo for other models.

These rain guards are designed to fit your Toyota FJ Cruiser from 2007 to 2022. They help keep rain out so you can crack your windows open for fresh air even during a storm. The set includes four pieces that mount directly onto your window frames.

Made from durable acrylic plastic, these window visors provide a sleek look while adding practical function to your daily drive. The black finish with a chrome strip complements the FJ Cruiser's rugged styling. They are easy to install using the included adhesive tape, with no drilling or special tools required.

Each visor acts as a sun shield and rain deflector, reducing glare and helping to keep your cabin cooler on sunny days. The set is a direct fit for the FJ Cruiser, ensuring a clean, factory-like appearance once installed.

Protect your interior and enjoy better ventilation in any weather. These side window deflectors are a simple upgrade that makes a noticeable difference in comfort.

Key Features and Benefits

- Vehicle-specific design that fits Toyota FJ Cruiser models from 2007 to 2022 for a seamless installation

• Acrylic plastic construction that resists fading and holds up well against sun and rain for long-lasting use

• Chrome strip accent that adds a stylish touch to your vehicle's exterior

• Adhesive tape mounting that allows for quick, tool-free setup without damaging your car's paint

• Four-piece set that covers all side windows for complete weather protection

Who Is This For

- Toyota FJ Cruiser owners looking to reduce rain entry while keeping windows open

• Drivers who want to cut down on wind noise and glare during highway travel

• Anyone upgrading their FJ Cruiser with a practical, low-profile accessory

Usage Scenario

Mark lives in a region where afternoon showers are common. He enjoys having fresh air in his FJ Cruiser but hates getting the seats wet when he cracks the windows. After installing these rain guards, he can leave the windows slightly open during a downpour without worrying about water soaking the interior. The visors also help reduce the harsh sun glare that used to hit the side of his face during his evening commute.

Micro Comparison

Unlike universal stick-on visors that may not align properly, this set is molded specifically for the FJ Cruiser's window frames. The acrylic material is more resistant to UV damage than standard plastic options. The included chrome strip gives it a finished look that blends well with the vehicle's design.

Specifications

Material: Acrylic

Color: Black with chrome strip

Quantity: 4 pieces per set

Placement: Side windows

Installation: Adhesive tape

Compatibility: Toyota FJ Cruiser 2007-2022

Package Includes

- 4 x Window Air Vent Visors

• Adhesive tape (pre-installed)

Why You Will Love It

You get the freedom to enjoy fresh air without worrying about rain or sun. The visors blend right in with your FJ Cruiser's look, adding function without fuss. It is a small upgrade that makes every drive more comfortable.

Questions and Answers

Question: Will these fit a 2010 Toyota FJ Cruiser?

Answer: Yes, they are designed for all FJ Cruiser models from 2007 to 2022.

Question: Do I need to drill holes to install them?

Answer: No, they attach with strong adhesive tape. No drilling is needed.

Question: Will the visors block my view while driving?

Answer: No, they sit above the window line and do not obstruct your visibility.

Question: How long does the adhesive hold up?

Answer: The tape is made for automotive use and holds securely for years when applied to a clean surface.

Question: Can I wash my car after installing these?

Answer: Yes, they are weather-resistant and hold up fine through car washes.

Upgrade the front end of your Ram 1500 with a Martin-style mesh grille guard. This custom-fit replacement or overlay adds a bold, aggressive look while protecting your hood and bumper from road debris.

This grille features a distinctive mesh pattern that gives your truck a tuned, custom appearance. It is designed specifically for the Dodge Ram 1500 models from 2013 to 2018, ensuring a precise fit. The durable construction is built to handle highway driving and all-weather conditions, providing lasting protection.

The grille guard acts as a hood and bumper protector, shielding your truck from stone chips, insects, and other road debris. It enhances the vehicle's aggressive stance, adding to its body kit styling. Installation is straightforward with a bolt-on or clip-on fitment, and all necessary hardware is included.

Key Features and Benefits

- Martin Style Design that provides a distinctive mesh pattern for a bold, custom front-end appearance

• Custom Fit for Dodge Ram 1500 (2013–2018) that ensures a seamless installation

• Hood and Bumper Protection that guards against stone chips, insects, and road debris

• Durable Construction that is built to handle highway driving and all-weather conditions

• Body Kit Styling that enhances the truck's aggressive stance

• Easy Installation with bolt-on or clip-on fitment and included hardware

Who Is This For

- Ram 1500 owners looking for a custom front-end upgrade

• Truck enthusiasts who want a bold, aggressive appearance

• Drivers seeking added protection for their hood and bumper

• Anyone wanting a durable, easy-to-install grille guard

Usage Scenario

Mark drives his 2015 Ram 1500 on a mix of highways and rural roads. After noticing several stone chips on his hood, he decided to install this Martin-style grille guard. The mesh pattern not only gave his truck a tougher look but also effectively stopped debris from hitting the front end. He completed the installation in his driveway with the included hardware.

Micro Comparison

Compared to a factory grille, this Martin-style mesh guard offers a more aggressive custom look. It provides better protection for the hood and bumper against road debris. The bolt-on design makes it a practical upgrade for any Ram 1500 owner.

Specifications

- Compatibility: Dodge Ram 1500 (2013–2018)

Package Includes

- 1× Front bumper grille mesh guard

• Mounting hardware

Why You Will Love It

You will love the instant upgrade to your truck's front-end style. The added protection gives you peace of mind on every drive. It is a simple, effective way to make your Ram 1500 stand out.

Questions and Answers

Question: Will this grille fit my 2016 Ram 1500?

Answer: Yes, this grille is designed for Dodge Ram 1500 models from 2013 to 2018.

Question: Does this replace the factory grille or just cover it?

Answer: It can replace or overlay the factory bumper grille.

Question: Is the installation difficult?

Answer: No, it is a simple bolt-on or clip-on installation with included hardware.

Question: What material is the grille made from?

Answer: The product is described as having durable construction, but the specific material is not listed in the source data.

Question: Does this grille provide protection from rocks?

Answer: Yes, it guards against stone chips and road debris.

Keep your RAM 1500 rolling safely with a direct-fit TPMS sensor that monitors tire pressure in real time. This 433MHz sensor replaces OEM part 68293199AA and is pre-programmed for select RAM 1500 model years. No complicated setup is needed.

Driving with incorrect tire pressure can reduce fuel efficiency and wear out your tires faster. This tire pressure sensor gives you accurate readings so you can maintain proper inflation. It works with your vehicle's existing TPMS system and alerts you when pressure drops.

The sensor comes pre-programmed for your specific RAM 1500 model year. After installation, you simply activate it using a scan tool or follow the re-learn procedure. The built-in battery lasts about three years under normal use, giving you long-term reliability without frequent replacements.

Built to match the original equipment specifications, this sensor fits perfectly and communicates seamlessly with your truck's onboard computer. It helps you avoid low-pressure warnings and keeps your driving experience smooth and safe.

Key Features and Benefits

- Pre-programmed for RAM 1500 that fits model years 2018 to 2024 for a straightforward install

• 433MHz frequency that syncs with your vehicle's existing TPMS system for accurate readings

• Battery life of about three years that reduces the need for frequent sensor changes

• Replaces OEM part numbers 68293199AA and 68507512AA for a direct swap

• Activates with a scan tool or re-learn procedure for quick setup after installation

Who Is This For

- RAM 1500 owners from model years 2018 to 2024 who need a direct replacement TPMS sensor

• DIY mechanics who want a pre-programmed sensor that installs without dealership programming

• Fleet managers maintaining multiple RAM 1500 trucks with consistent TPMS performance

• Drivers who want to avoid low-tire-pressure warnings and improve fuel economy

Usage Scenario

Mark noticed his RAM 1500's tire pressure warning light flickering on his morning commute. After checking the tires manually, he found one sensor was failing. He ordered this replacement TPMS sensor, swapped it in during his lunch break, and used his scan tool to activate it. The warning light turned off, and his dashboard now shows accurate pressure readings again. He drives with confidence knowing his tires are properly inflated.

Micro Comparison

Some universal TPMS sensors require programming at a dealership or specialized shop before they work. This sensor comes pre-programmed for your RAM 1500 model year, so you can install it yourself and activate it with a standard scan tool. It directly replaces the original part without adapters or modifications, saving you time and service fees.

Specifications

Frequency: 433MHz

Battery Life: About 3 years

Interchange Part Numbers: 68293199AA, 68507512AA

Package Includes

- 1 TPMS sensor (pre-programmed)

Why You Will Love It

You get a sensor that fits your truck perfectly and works right out of the box. No extra trips to the mechanic, no complicated wiring. Just install, activate, and drive with peace of mind knowing your tire pressure is monitored automatically.

Questions and Answers

Question: What frequency does this TPMS sensor use?

Answer: It operates on 433MHz, which is the standard frequency for RAM 1500 TPMS systems.

Question: Does this sensor need programming before installation?

Answer: It comes pre-programmed for your vehicle. After installation, you need to activate it using a scan tool or follow the re-learn procedure.

Question: How long does the battery last in this sensor?

Answer: The battery lasts about three years under normal driving conditions.

Question: Will this sensor fit my 2019 RAM 1500?

Answer: Yes, it fits RAM 1500 models from 2018 to 2024, including the 2019 model year.

Question: What is the OEM part number for this sensor?

Answer: It replaces OEM part numbers 68293199AA and 68507512AA.

Key Features

• Replacement Clip — It is sold as a replacement part for a front sun visor retainer clip.
• Beige, Gray or Black — It comes in beige, gray and black, so you can match the interior trim.
• Clip Weight — The clip weighs 24 g (0.85 oz).

Product Specifications

• Material: ABS
• Color: Beige, Gray, Black
• Placement on Vehicle: Front; left & right
• Weight: 24 g (0.85 oz)
• Warranty period: 2 years
• Condition: New
• Part numbers: EGP000040, EGP000050

What It Is / How It Works

A sun visor retainer clip is a small plastic clip that holds the edge of a sun visor in its bracket.

This replacement front sun visor retainer clip is made of ABS and comes in beige, gray and black. It fits the Range Rover L322 (2003–2012).

Who It's For / Use Cases

Sun visor retainer clips suit drivers who want to replace one clip rather than the whole sun visor assembly.

Repair shops that keep spare interior trim parts on hand can stock a clip like this for vehicles it fits.

How to Use / Care

1. Use it as a replacement front sun visor retainer clip.

How to Choose

Start with the vehicle: the page gives the Range Rover L322 (2003–2012) as the fit, so confirm your vehicle matches that model and year. Choose the colour that best matches your interior trim. Finally, compare the part numbers in Product Specifications with your old clip.

Frequently Asked Questions

What is the clip made of?
It is made of ABS plastic.

Which colours does it come in?
It comes in beige, gray and black.

Which vehicle does it fit?
It fits the Range Rover L322 (2003–2012).

Which placement is it sold for?
It is marked for the front sun visor, and the page gives both left and right placement.

How long is the warranty?
The warranty period is 2 years.

Upgrade your 1.8T engine with the RASTP Performance Air Intake Induction Kit. Designed for VW Golf MK4 GTI and Audi A3 models, this kit improves airflow for better throttle response and a more aggressive engine sound. A simple modification that makes a noticeable difference on the road.

This kit is built around a high-flow cone air filter that replaces the restrictive factory air box. The dual-layer foam element traps dirt while allowing a higher volume of air into the engine. This helps your turbocharged 1.8T breathe easier, especially during hard acceleration.

The included heat shield is a key part of the design. It mounts directly to the factory air box points, creating a barrier between the filter and the hot engine bay. This helps keep intake air temperatures lower, which is important for maintaining power on warm days or in stop-and-go traffic.

Installation uses the included silicone coupler and full fitting kit. The 4-ply silicone connector creates a secure seal to the MAF sensor housing. All necessary nuts, bolts, and clamps are provided, making this a direct replacement for the stock system.

Key Features and Benefits

- High-flow cone filter with dual-layer foam that increases airflow to the engine for improved throttle response.

• Precision-folded black powder-coated heat shield that mounts to factory points to block engine heat and maintain cooler intake air.

• 4-ply silicone coupler that provides a strong, leak-free connection between the filter and the MAF housing.

• Full fitting kit with all nuts, bolts, and clamps included for a straightforward installation without needing extra parts.

• Spun aluminum filter base with a velocity stack inlet that reduces air turbulence for smoother airflow.

Who Is This For

- Owners of a VW Golf MK4 GTI or Audi A3 1.8T looking for a direct bolt-on intake upgrade.

• Drivers who want a more responsive throttle and a louder induction sound without a full turbo-back exhaust.

• Enthusiasts planning future tuning who need a less restrictive intake as a first step.

• Anyone rebuilding or replacing a worn factory air box on their 1.8T platform car.

Usage Scenario

Mark had been daily driving his 2002 Golf GTI 1.8T for three years. The factory air box felt sluggish on on-ramps, and he wanted a bit more sound without going full aftermarket. He installed the RASTP kit in his driveway using basic hand tools. The first time he hit the highway, he noticed the turbo spool was more audible and the car felt more eager to rev. The heat shield kept the filter away from the radiator heat, so performance stayed consistent even in summer traffic.

Micro Comparison

Compared to a simple cone filter that hangs loose in the engine bay, this RASTP kit includes a dedicated heat shield that mounts to the factory air box points. That shield helps keep intake temperatures lower than an open filter setup. It also includes the silicone coupler and all hardware, so you don't need to source extra parts. For a 1.8T owner, this is a more complete solution than just buying a universal filter.

Specifications

Material: Foam Filter + Black Silicone Coupler + Aluminum Heat Shield

Inlet Size: 70mm / 2.75 in and 76mm / 3 in

Color: Black

Item Weight: 1.3 kg / 45.9 oz

Manufacturer Part Number: OFI140-BK

Package Includes

For 70mm Air Filter Kit:

1 x Air Filter Kit (includes heat shield, silicone coupler, and all mounting hardware as shown in the product images)

For 76mm Air Filter:

1 x Air Filter (heat shield and some accessories are not included; refer to product images for details)

Why You Will Love It

You will love the immediate difference in engine response when you step on the gas. The sound alone makes every drive more engaging, and knowing your engine is getting cooler, cleaner air adds peace of mind. It is a weekend project that transforms how your car feels on the road.

Questions and Answers

Question: Will this fit my 2001 Audi A3 1.8T?

Answer: Yes, it is designed for the 1.8T engine in the Audi A3, TT, and VW Golf MK4 GTI. It fits the 70mm MAF sensor housing.

Question: Does this kit come with a heat shield?

Answer: The 70mm Air Filter Kit includes the heat shield and all mounting hardware. The 76mm Air Filter option does not include the heat shield.

Question: Is professional installation required?

Answer: Professional installation is highly recommended. No instructions are included, so experience with intake systems is helpful.

Question: What is the difference between the 70mm and 76mm options?

Answer: The 70mm kit is a full intake system for cars with a 70mm MAF housing. The 76mm filter is a standalone filter that fits any 76mm / 3 inch intake hose.

Question: Will this work with a stock turbo setup?

Answer: Yes, it is a direct upgrade for stock turbo 1.8T engines. It can also support mild tuning upgrades.

Key Features

• 360-Degree Swivel — The ratchet head swivels 360 degrees, so the spreader can be set in any position.
• Two-Way Ratchet — The two-way ratchet mechanism opens and closes the jaws.
• Single to Quad Pistons — It is made to work on single, twin or quad piston calipers.
• Parallel Force Spread — It spreads force in a parallel manner to prevent misalignment of the pistons.

Product Specifications

• Colour: Brown
• Material: Stainless steel spreader; rubber handle
• Total length: 10.7''/271mm
• Retraction support: 1.3''/33mm
• Spread support: 2.52''/64mm

What It Is / How It Works

This is a ratchet-type brake caliper press compression tool for cars. It is built to push back or spread caliper pistons during brake work.

Who It's For / Use Cases

Brake caliper press tools suit car owners and mechanics who service disc brakes and need to push back caliper pistons or spread brake pads during a brake job. They are useful for anyone who wants a manual tool in place of forcing pistons by hand.

How to Use / Care

1. Turn the ratchet head 360 degrees to position the spreader where the caliper needs it.
2. Use the tool from any direction, with its thickened, reinforced pad and comfortable handle.
3. Use the bi-directional ratchet to spread the pistons or retract them.
4. Use the tool across the wide range of car brake caliper jobs it is designed for.

How to Choose

Start with the caliper you work on, including whether it is a single, twin or quad piston design. Check your brake caliper size before buying, then match it to the retraction and spread supports listed in Product Specifications.

Frequently Asked Questions

What sizes does the tool cover?
The total length is about 10.7''/271mm. The retraction supports about 1.3''/33mm and the spread supports about 2.52''/64mm.

Which piston calipers does it work on?
It is made for single, twin or quad piston calipers, and it is also suitable for single and double piston floating calipers.

What is the tool made of?
The spreader is made of stainless steel and the handle is made of rubber, which is comfortable to grip.

How does the ratchet work?
The two-way ratchet mechanism opens and closes the jaws, and the ratchet head swivels 360 degrees so the spreader can sit in any position.

Should I check my caliper size first?
Yes, measure your brake caliper before buying. The tool's supports are listed at 1.3''/33mm for retraction and 2.52''/64mm for spread.

Key Features

• RAV4 Fit — It fits the RAV4 center console armrest box.
• PU Leather Surface — It is made of PU leather, the material for the armrest lid cover.

Product Specifications

• Compatible With: RAV4; 2026 RAV4
• Material: PU leather

What It Is / How It Works

This armrest box cover is a fitted cover for the center console armrest box. It fits the RAV4 and is made of PU leather. Armrest box covers are an interior modification accessory for the console lid.

Who It's For / Use Cases

They are a common choice for interior modification projects where the goal is a new surface on the armrest box.

How to Use / Care

1. Use it to cover the center console armrest box of a RAV4 as an interior modification.

How to Choose

Start with the vehicle. The cover is for the RAV4, and the Compatible With row in Product Specifications names that model, so confirm your car is a RAV4 before you buy. Next, consider the surface you want. This cover is made of PU leather, so it gives the console lid a leather-type finish. Choose the cover that matches the armrest box on your own vehicle, and keep the vehicle model as the main selection point.

Frequently Asked Questions

Which vehicle is this cover for?
It fits the RAV4. The Compatible With row in Product Specifications names the RAV4.

What material is the cover made of?
It is made of PU leather. The Material row in Product Specifications gives the same material.

What does the cover go over?
It is a cover for the center console armrest box, the padded lid between the front seats.

What is the cover used for?
It is used to change the look and surface of the center console armrest box as an interior modification accessory.

Does the cover need a separate armrest box?
The cover is made for the center console armrest box on the RAV4, so the console armrest box is the part it goes over.

Key Features

• Screen Glare Block — It blocks reflection on the screen in strong light, which helps the screen stay visible during aerial photography.
• Anti-Scratch Protection — It shades the sun and also guards the screen against scratches and drops in one two-in-one design.
• Ventilation Holes — Holes at the bottom help heat dissipate during use.
• Multi-Level Angle Adjustment — The angle adjusts across several levels, and the joystick and lanyard stay usable.
• Folding Design — It folds over the screen when not in use, so the sun cover does not need to be removed.

Product Specifications

• Weight: 2.6 oz
• Size: 6.77 × 2.67 × 4.96 in
• Remote controller: Not included

What It Is / How It Works

This sun hood is a sunshade and screen protector for the RC 2 remote controller. It is compatible only with RC 2, not DJI RC. It is a sunshade for controller screens, which gives the display shade from bright outdoor light.

Who It's For / Use Cases

Controller sun hoods of this kind suit pilots who fly outdoors in bright sunlight and want the display easier to read. They also suit people who carry a controller in a bag or case and want the screen covered when it is not in use.

How to Use / Care

1. Keep the ventilation holes at the bottom open so heat can dissipate during use.
2. Adjust the angle across the multiple levels to set the shade, keeping the joystick and lanyard free to use.
3. Fold the sun cover over the screen when the controller is not in use, without removing the cover.

How to Choose

Start with the controller type, since this sun hood is compatible only with RC 2 and not DJI RC. Next, decide whether you need mainly shade for the screen or full protection while the controller is stored. Controller sun hoods with a folding cover and adjustable angle suit pilots who switch between flying and carrying the controller. Choose the size that matches the controller measurements listed in the specifications.

Frequently Asked Questions

Which controller does it fit?
It is compatible only with the RC 2 remote controller, not DJI RC.

Does it include the remote controller?
It does not include the remote controller, so the remote control is sold separately.

Does it help with glare on the screen?
It blocks reflection on the screen in strong light and helps the screen stay visible during aerial photography.

Can I still use the joystick and lanyard with it attached?
The multi-level angle adjustment does not affect joystick operation or lanyard use.

How big is it and how much does it weigh?
It measures 6.77 × 2.67 × 4.96 in and weighs 2.6 oz.

Key Features

• 8 LED Layout — Eight LEDs sit in the kit: two white landing gear lights, a red light on the left wing, a green light on the right wing, a red anti-collision light and three flashing white lights.
• Standard Flying Mode — In standard flying mode the left red and right green lights stay on, the flashing white light flashes quickly, the anti-collision red light flashes quickly and the landing gear white light grows brighter.
• Alternate Flashing — In alternate flashing, the left and right lights flash twice alternately.
• Manual or Remote Mode — It can run in manual mode or under remote control, which gives flexible operation.
• Low Voltage Warning — When receiver voltage falls below 4.9V, all lights flash quickly, which supports a safe return.

Product Specifications

• Color: White, Red, Green
• Material: Metal, plastic
• LED Qty: 8Pcs
• Piece Count: 1 pcs
• Size: 35 × 24 × 8 mm (1.38 × 0.94 × 0.31 in)
• Weight: 53 g (1.87 oz)
• Cable Length: 600mm / 23.6inch
• Operating Voltage: 4-6V
• Operating Current: 30mA
• Age Range: 14+y

What It Is / How It Works

This is an RC light kit: an LED lighting system with a control box, designed for RC airplanes and helicopters. The kit includes eight LEDs that mark the wings, landing gear and anti-collision position of a model.

Who It's For / Use Cases

RC light kits like this suit modellers who fly RC airplanes or helicopters and want visible lighting on their models. They also suit hobbyists who like flashing light patterns for display or for flying in low light, and who prefer a control box they can switch between manual and remote operation.

How to Use / Care

1. Use it to add flashing LED lights to an RC airplane or helicopter.

How to Choose

Start with the transmitter you fly with. Check that your receiver runs on 4-6V, which matches the listed operating voltage. Lighting kits in this category are usually chosen by how many lights you want on the model and how long the control cable needs to reach the receiver.

Frequently Asked Questions

Are batteries included?
No. Batteries are not included, and the kit has no battery of its own.

What comes in the box?
The box holds one 8 LED lighting system kit, two adhesive tapes, one control box and one manual.

What lighting patterns does it have?
It has a standard flying mode, in which the wing and anti-collision lights stay on or flash, and an alternate mode in which the left and right lights flash twice alternately. In emergency landing mode all lights flash quickly, and in normal mode all lights flash slowly.

What happens when the receiver voltage gets low?
When the receiver voltage is lower than 4.9V, all lights flash quickly, which supports a safe return.

Key Features

• Remote Control Range — The remote control reaches up to 40 m (131.2 ft) and works on a 2.4G signal.
• LED Lights — It has front and rear roof lighting, plus LED searchlights and headlights.
• Rear Wheel Drive — It has rear wheel drive and simulated off-road tyres with strong grip.
• Metal and Plastic Body — The body is partly high-strength aluminum alloy and partly plastic, which gives it strong stability.

Product Specifications

• Material: Metal and plastic
• Dimensions: 24.5 × 14.5 × 9.5 cm (9.6 × 5.7 × 3.74 in)
• Scale: 1:20
• Remote Distance: 40 m (131.2 ft)
• Control Channels: 4 channels
• Battery: 3.7V 500mAh
• Charging time: 90 minutes
• Maximum speed: 15 km / h
• Working time: 30 minutes
• Size: 16.5 × 15 × 6.8 cm (6.5 × 5.9 × 2.7 in); 21 × 13.6 × 9 cm (8.3 × 5.4 × 3.54 in)

What It Is / How It Works

This is a 1:20 scale remote-controlled RC car with a ready-to-go build. It is driven with a 2.4G remote control and has an off-road style body.

Who It's For / Use Cases

RC cars suit hobbyists and collectors who enjoy remote-controlled model vehicles. They also suit people who like driving a small model on outdoor surfaces such as dirt, grass and gravel, where rough-terrain tyres and a rear-drive layout are useful.

How to Use / Care

1. Use the remote control to drive the car forward, reverse, brake and turn left or right.

How to Choose

Choose an RC car by the scale and the terrain you plan to drive on. Model cars at this size suit open outdoor areas, while a larger chassis handles uneven ground more steadily. Check the battery capacity and charging time in Product Specifications to plan your driving sessions.

Frequently Asked Questions

Are batteries included?
Yes. The battery is 3.7V 500mAh.

How long does charging take?
Charging takes 90 minutes.

How far does the remote control reach?
The remote control reaches up to 40 m (131.2 ft).

What size is the car?
It measures 24.5 × 14.5 × 9.5 cm (9.6 × 5.7 × 3.74 in).

Does the car have lights?
Yes. It has front and rear roof lighting, plus LED searchlights and headlights.

Key Features

• Remote Control Range — The remote control reaches approximately 20 meters (65.6 ft), so you can steer the car across a wide area.
• Forward and Reverse Driving — The car moves forward and in reverse, deviates to the left and rotates to the right.
• LED High-Brightness Lights — Built-in LED lights are bright, and the light source can be switched on and off.
• Anti-Interference Control — The remote control is designed to resist interference during driving.
• Car Is Powered — The car is powered by a lithium battery rather than a non-rechargeable pack.

Product Specifications

• Scale: 1:18
• Product Dimensions: 18 × 8.6 × 9.5 cm (7.1 × 3.4 × 3.74 in); A: 22 x 11 x 12 cm (8.7 × 4.3 × 4.7 in)
• Color: White, Blue, Green
• Material: Metal, plastic and rubber
• Battery Capacity: 3.7V 500mAh
• Charging Voltage: 3.7V
• Charging Time: Approximately 60 minutes
• Usage Time: Approximately 30 minutes
• Remote Control Range: Approximately 20 meters (65.6 ft)
• Frequency: 40 MHz
• Remote Control Battery: 2 AA batteries (not included)
• Charger: USB cable charging
• B: 22 × 11 × 11 cm (8.7 × 4.3 × 4.3 in)

What It Is / How It Works

This remote control car is a 1:18 scale truck-style model with LED lights and a rear door that opens. It is driven with a remote control and runs on a rechargeable lithium battery.

Scale remote control vehicles of this type are small replicas of full-size trucks, built for driving on flat surfaces and cargo-style play in a model setting.

Who It's For / Use Cases

Remote control car models suit hobbyists and collectors who enjoy driving scale vehicles, watching lights and movement, and seeing how a replica truck handles on a flat floor, a garage path or a yard.

How to Use / Care

1. Use it to drive the remote control car with its remote control.

How to Choose

Check the product dimensions of 18 × 8.6 × 9.5 cm (7.1 × 3.4 × 3.74 in) against the space where you plan to drive, and compare the remote control range of approximately 20 meters (65.6 ft) with that distance. Color is a separate choice, and white, blue and green are offered.

Frequently Asked Questions

How far can the remote control reach?
The remote control range is approximately 20 meters (65.6 ft). The remote uses 2 AA batteries, which are not included.

How long does one charge last?
Usage time is approximately 30 minutes. Charging takes approximately 60 minutes by USB cable, and the battery is a 3.7V 500mAh lithium battery.

Does it have lights?
It has high-brightness LED lights, and the light source can be switched on and off from the remote.

What frequency does the remote control use?
It operates at 40 MHz and has an anti-interference remote control.

Which colors are offered?
It is offered in white, blue or green. Pick the color you prefer when ordering.

Key Features

• Remote Control Driving — It moves forward, backward, and turns left and right under remote control.
• Rechargeable Battery — It runs on a 3.7V 800mAh rechargeable battery that is included, and it charges with a USB cable.

Product Specifications

• Material: Plastic
• Scale: 1:18/1:20
• Age Range: 3-6Y,6-12Y
• Charging Voltage: 3.7V
• Charging Time: About 120 min
• Play Time: About 20 min
• Remote Distance: About 20 m
• Car Size: L 25*10.5*6.5cm; M 21*9.5*5.5cm

What It Is / How It Works

RC toy cars are remote-controlled model vehicles built for driving play. They are typically small scale replicas of sports cars that children steer with a handheld transmitter, and they can be run on indoor floors or outdoor paths.

Who It's For / Use Cases

RC toy cars suit children who enjoy driving games and hands-on toys. Parents looking for a remote-controlled toy that a child can operate alone on a flat surface will find this type of car a practical choice for indoor and outdoor play.

How to Use / Care

1. Charge the car battery with the USB charging cable; charging takes about 120 minutes.
2. Use the remote control to drive the car forward, backward, or turn it left and right.
3. Place the car on the display stand to show it as an exhibit when you are not driving it.

How to Choose

Choose a size by where the car will run. Larger RC cars need more open floor space, while smaller ones are easier to store and handle in a child's hands. Check the size and scale details in the specifications and match them to the play area and the storage space you have.

Frequently Asked Questions

What is the car made of?
It is made of plastic.

How long does charging take, and how long does it run?
Charging the car battery takes about 120 minutes with the USB cable, and the car runs for about 20 minutes of use.

What comes in the box?
The pack includes 1 remote control car, 1 remote control, 1 rechargeable 3.7V 800mAh battery, and 1 USB charging cable. The remote control takes 2 AA batteries, which are not included.

Where can it be driven?
It is suited to smooth surfaces for indoor and outdoor play.

How far does the remote reach?
The remote control has a distance of about 20 m.

Key Features

• 304 Stainless Steel — The clips and pins are made of 304 stainless steel.
• 50 Piece Pack — The pack contains 50 pieces of RC car body parts.

Product Specifications

• Material: 304 stainless steel
• Model: R type bolt; Trx-4 Scx10 Hsp
• Pack Count: 50pcs
• Scale: 1/5, 1/6, 1/7, 1/8, 1/12, 1/16
• Age Range: 14+y

What It Is / How It Works

This is a set of RC car body clips, pins, housing latches and R buckles, sold as a 50-piece pack for RC cars in the scales named on the product.

Who It's For / Use Cases

RC car builders and hobbyists who need spare body clips, pins, latches or R buckles tend to buy a mixed assortment like this, so they have several sizes on hand. Owners of 1/5 to 1/16 scale RC cars can keep the pack as a stock of replacement parts for shell and body work.

How to Use / Care

1. Use the pieces to replace body clips, pins, housing latches or R buckles on an RC car in a matching scale.

How to Choose

Match the scale of your car to 1/5, 1/6, 1/7, 1/8, 1/12 or 1/16 first. Choose the part type that matches the body clip, pin, housing latch or R buckle position you need to replace. Pick the pack size by how many spares you expect to use over time.

Frequently Asked Questions

What scales are these parts for?
The set is for RC cars in 1/5, 1/6, 1/7, 1/8, 1/12 and 1/16 scales. Match your car's scale to one of these before you choose.

How many pieces are in the pack?
The pack has 50 pieces, made up of body clips, pins, housing latches and R buckles.

What material are they made of?
The clips and pins are made of 304 stainless steel.

Do they need a battery?
No. The parts have no battery and no power supply.

Who is the brand?
The brand is AJRC.

Key Features

• Plastic Build — It is made of plastic, and the plastic type is ABS.
• 1/10 Scale Fit — It is for 1/10 scale RC cars.

Product Specifications

• Material: Plastic
• Plastic Type: ABS
• Scale: 1:10
• Age Range: 14+y

What It Is / How It Works

This RC car body post cushion is a small plastic cushion piece for 1/10 scale RC car bodies. Cushions of this type sit where a car shell meets its post mounts, adding a soft layer between the two parts.

Who It's For / Use Cases

Hobbyists who run 1/10 scale RC cars and need replacement body post cushions for their shells suit this kind of part. It also helps owners who rebuild or refresh a shell and want a simple plastic spare for the mount points, so the cushion can be swapped without changing the rest of the car.

How to Use / Care

1. Use it to cushion the body posts of a 1/10 scale RC car shell.

How to Choose

Start with scale and match the part to your car's chassis size. This cushion is for 1/10 scale RC cars, shown as 1:10 in Product Specifications. Plastic is the material, with ABS as the plastic type, so compare the build details there before you choose.

Frequently Asked Questions

What scale is it for?
It is for 1/10 scale RC cars, shown as 1:10 in the Product Specifications.

Are batteries included?
No. It has no battery, and batteries are not included.

What is it made of?
It is made of plastic, and the plastic type is ABS.

Which vehicles is it for?
It is for RC cars, the vehicle type shown in the Product Specifications.

Key Features

• Aluminum Alloy and Steel — The clips are made of aluminum alloy and steel and are intended for long time use.
• Precise Workmanship — The workmanship is precise, giving the model car a neat finish.
• Multiple Colors — They come in several colors, so you can pick one that suits your build.
• Scale Range — The clips are sized for 1/10, 1/12, 1/16 and 1/18 RC cars.

Product Specifications

• Material: Aluminum alloy, steel
• Scale: 1/10, 1/12, 1/16
• Piece Count: 1 pcs
• Compatible models: Traxxas Hsp Redcat Rc4wd Tamiya Axial SCX10 D90 Hpi RC

What It Is / How It Works

These are body shell clip pins, a pin buckle type of clip for attaching the body shell of a model car.

Who It's For / Use Cases

RC hobbyists who maintain or rebuild a radio-controlled car often need replacement body shell clips. They suit owners who want to fasten a shell to a chassis firmly so the body stays on the model during driving. Modelers who customize the look of a car can use them as well.

How to Use / Care

1. Use the clips on the body shell of an RC car in the scales listed above.
2. The clips are made of aluminum alloy and steel for long time use.

How to Choose

Choose clips that match the scale of your RC car. Check the pin size against the hole in your body shell before ordering so the clip seats properly. Pick a color that suits your model's look.

Frequently Asked Questions

What scales does it fit?
It is sized for 1/10, 1/12, 1/16 and 1/18 RC cars.

What is it made of?
It is made of aluminum alloy and steel and is built for long time use.

Does it need batteries?
No. It has no battery, and batteries are not included.

How many pieces are in one order?
Each listing is 1 pcs, so one piece per order.

Who is the brand?
The brand is AZ.

Key Features

• Body Shell Protection — Stick it to the back of the body shell to improve protection.
• Shell Impact Guard — It is meant to help keep the car shell from smashing.
• Stronger Soft Shells — It increases the toughness and strength of a soft body shell.

Product Specifications

• Material: Composite Material
• Color: Silver
• Piece Count: 1 pcs
• Dimensions: 4 m , 4.7–5 cm
• Compatible models: RC Track Reinforcement

What It Is / How It Works

This RC car body shell foil tape is a thin strip meant for the body shell of a radio-controlled car. Shell tapes like this are generally applied to the back of the shell as an extra layer of reinforcement.

Who It's For / Use Cases

RC hobbyists with 1/10 or 1/8 scale cars who want extra reinforcement on a soft body shell are the typical buyers of this kind of tape. It suits owners who prefer a simple, flat strip for shell reinforcement over replacing the whole body shell.

How to Use / Care

1. Stick the tape to the back of the body shell to improve protection.

How to Choose

Start with scale: this tape suits 1/10 and 1/8 RC cars, so match it to your car's scale before buying. Silver is the colour. Next, check the length you need against the 4 m (13.1 ft) measure, and the 4.7–5 cm (1.85–1.97 in) width when you plan where the strip goes on the shell.

Frequently Asked Questions

Which RC cars does it suit?
It suits 1/10 and 1/8 RC cars.

What is the tape made of?
It is made of composite material. One piece is in each pack.

Does it help strengthen a soft body shell?
It is meant to increase the toughness and strength of a soft body shell and to help keep the shell from smashing.

Does it need a battery?
It is a plain tape with no battery.

What colour is it?
It is silver.

Key Features

• 304 Stainless Steel — The clips are made of 304 stainless steel, a metal that is used for the whole set.

Product Specifications

• Material: 304 stainless steel
• Scale: 1; 1/8, 1/10, 1/12, 1/14, 1/16, 1/18
• Pack quantity: 20 or 50 pcs
• Model: R type bolt
• Age Range: 14+y
• Intended Use: Vehicles & Remote Control Toys

What It Is / How It Works

RC car body clips are small fasteners that hold a plastic body shell to the chassis of a remote control car.

The clips are made of 304 stainless steel and are sold in packs of 20 or 50 pcs.

Who It's For / Use Cases

Remote control car hobbyists who need replacement body shell clips suit this set. The set is intended for vehicles and remote control toys, so it suits owners of buggies, trucks and other RC models that use body shell pins.

How to Use / Care

1. Use them to fasten the body shell on your RC car.

How to Choose

Choose the specification that matches your own car model before you buy.

Check the scale and chassis size you own, then pick the matching option from the scales listed in the specifications.

Frequently Asked Questions

What material are the clips made of?
The clips are made of 304 stainless steel.

How many clips come in a pack?
It comes in 20-piece or 50-piece packs.

Does the set need batteries?
No. The set has no battery, and batteries are not included.

What vehicles are these clips for?
The set is intended for vehicles and remote control toys. Choose the specification that matches your own car model.

Key Features

• Realistic Construction — The simulated construction makes it look real.
• RC Car Decoration — It is made to decorate an RC car.

Product Specifications

• Intended Use: Vehicles & Remote Control Toys
• Applicable for: 1/10 SCX10 RC4WD D90 CC01 RC car
• Material: Plastic
• Package: 1 simulated fire extinguisher

What It Is / How It Works

This is a simulated fire extinguisher toy accessory for RC cars. It is a decorative piece with a realistic look, sold as one simulated fire extinguisher made of plastic.

Who It's For / Use Cases

Decorative RC car accessories suit hobbyists who like to add detail to a model vehicle. Toy fire extinguisher pieces suit people who build out a scene around a crawler or model truck, with small props that finish the look of the vehicle. They also suit anyone who enjoys dressing up a remote control car with realistic-looking details.

How to Use / Care

1. Use it to decorate your RC car.

How to Choose

Start with the vehicle. Compare the Applicable for row in Product Specifications with your model before ordering. Decorative props like this are chosen by the model scale and the look you want on the vehicle, so match the listed RC car to your build.

Frequently Asked Questions

What is included?
The pack has one simulated fire extinguisher.

What is it made of?
It is made of plastic, and the simulated construction makes it look real.

Does it need a battery?
No. It has no battery, and batteries are not included.

Is it a working extinguisher?
No. It is a simulated fire extinguisher made to decorate an RC car.