Product Specifications

• Piece Count: 1pcs
• Material: Plastic
• Color: Pink
• Size: One Size
• Washing: Hand Wash
• Season: Four Seasons

What It Is / How It Works

This is a pink car seat headrest hanger, a plastic hook that hangs over a car seat headrest. It is one piece and is made for purses, umbrellas and grocery bags.

Who It's For / Use Cases

Headrest hangers like this suit drivers and passengers who want to keep purses, umbrellas and grocery bags off the floor of the car.

How to Use / Care

1. Hang the hook over a car seat headrest to hold a purse, umbrella or grocery bag.
2. Hand wash the plastic hook when it gets dirty.

Frequently Asked Questions

What does it hang on?
It hangs over a car seat headrest. Headrest hangers like this are meant for purses, umbrellas and grocery bags.

What material is it made of?
It is made of plastic.

How many come in a pack?
One piece per pack.

How should I clean it?
Hand wash it.

Key Features

• Lightweight Build — It is a lightweight rack for carrying bikes on a car.
• 20 kg (44.1 lb) Capacity — It is rated to carry up to 20 kg (44.1 lb).
• Fits MTB Bikes — It is made for MTB and mountain road bikes.
• Quick Setup — Setup takes about ten minutes.

Product Specifications

• Material: Aluminum
• Capacity: 20 kg (44.1 lb)
• Package Weight: 2.6~5.5kg (5.7–12.1 lb)
• Size: 93 × 13 cm (36.6 × 5.1 in); About 47*13; 82*13
• Shape: Rectangular
• Warranty: 365 days

What It Is / How It Works

Bike racks are car carriers that hold bicycles off the ground on a vehicle's roof or trunk. This bike rack gives cyclists a way to transport bikes without placing them inside the vehicle.

How to Use / Care

1. Set up the rack, which takes about ten minutes.

How to Choose

Add up the weight of your bikes and make sure the total stays within the 20 kg (44.1 lb) capacity. Confirm the bikes you own are MTB or mountain road styles.

Frequently Asked Questions

How much can it carry?
It is rated for 20 kg (44.1 lb) of load.

What is the rack made of?
It is made of aluminum.

Which bikes does it fit?
It is made for MTB and mountain road bikes.

What is the warranty period?
The warranty runs 365 days.

How long does setup take?
Setup takes about ten minutes.

Key Features

• U-Shaped Cutout — The U-shaped notch is made for mugs with handles, so handled tumblers go in and come out easily.
• Holds Large Drinkware — It is sized for 40oz tumblers, water bottles, insulated mugs and other large capacity cups.
• Steady Hard Plastic — The ABS body keeps the cup steady and helps prevent tipping while driving.
• Fits Most Vehicles — It fits most sedans, SUVs, trucks and RVs and widens a narrow factory cup holder.
• Simple Installation — It inserts directly into the factory cup holder, and no tools are required.

Product Specifications

• Material: ABS
• Installation Type: Cup holder installation
• Vehicle fit: Sedan, SUV, truck and RV cup holders
• Suitable for: 40oz tumblers, water bottles, insulated mugs and other large capacity cups

What It Is / How It Works

This car cup holder expander is an adapter that sits in a vehicle's factory cup holder to hold larger drinks. Cup holder adapters like it widen a narrow opening so that bigger bottles and mugs stay upright.

Who It's For / Use Cases

Cup holder expanders suit drivers and passengers who carry large tumblers, water bottles or mugs with handles and find the factory cup holder too narrow for them. They are useful for daily commutes and road trips where a steady place for a big drink matters.

How to Use / Care

1. Insert the adapter directly into your factory car cup holder.
2. No tools are required, so press it in by hand.
3. Place your tumbler, bottle or handled mug in the holder, using the U-shaped notch for mugs with handles.
4. To remove it, pull the adapter out of the factory cup holder by hand.

How to Choose

Start with the drinks you carry most often. If you use handled mugs, the U-shaped notch is the feature to look for. If your bottles or tumblers are wider or taller than your factory cup holder, a holder that widens the opening is the right type of product for that gap.

Frequently Asked Questions

What drinks does it hold?
It is sized for 40oz tumblers, water bottles, insulated mugs and other large capacity cups.

Which vehicles does it fit?
It is made to fit most sedans, SUVs, trucks and RVs with a factory cup holder.

Can it hold mugs with handles?
The U-shaped notch is designed for handled mugs and tumblers, so they can be put in and taken out easily.

What is it made of?
It is made of ABS plastic, which is hard and keeps the cup steady while driving.

Does it need tools to install?
No tools are required. It inserts directly into the factory cup holder and can be removed just as quickly.

Key Features

• Roof Access Step — It can be used to climb onto the roof of a car.
• Pedal For Washing — A pedal lets you reach the roof when washing it.
• Thickened Construction — The thickened construction is built for sturdiness and heavy-duty use.
• Folding Multi-Use Design — It folds and works as a car top stand, step, door hook and foot pedal.

Product Specifications

• Maximum load: 150 kg (330.7 lb)
• Size: 15.6 × 7.6 × 7.7 cm (6.1 × 3 × 3.03 in)
• Material: Aluminium alloy
• Color: Silver, Black, Orange

What It Is / How It Works

This car roof rack is a foldable aluminium alloy step that also works as a door step, door hook and foot pedal.

How to Use / Care

1. Install it on the car door frame for stable support.
2. Use it to climb onto the car roof or to wash the roof.
3. Use it as a vehicle door step, auto door hook or roof access step.
4. Do not exceed the maximum load capacity of 150 kg (330.7 lb).

Frequently Asked Questions

What is the maximum load?
It supports a maximum load of 150 kg (330.7 lb), so do not exceed that limit.

What is it made of?
It is made of aluminium alloy.

What colors are available?
It comes in Silver, Black and Orange.

What size is it?
It measures 15.6 × 7.6 × 7.7 cm (6.1 × 3 × 3.03 in).

Can it be used to reach the roof for washing?
It can be used to climb onto the roof, and its pedal helps when washing the roof.

Key Features

• Memory Foam and Fiber — It is made of memory foam and synthetic fiber, and the foam molds to the natural curves of your body.
• Head and Neck Alignment — It helps maintain proper head and neck alignment while sitting and traveling.
• Travel Seating Support — It suits use on a plane, train, bus, car, or while watching TV at home.

Product Specifications

• Color: Black, Gray
• Material: Memory foam and synthetic fiber

What It Is / How It Works

This car neck pillow is a memory foam neck pillow for seated travel. It is made of memory foam and synthetic fiber, and the foam is designed to mold to the natural curves of your body. It helps maintain proper head and neck alignment while sitting and traveling.

Who It's For / Use Cases

Neck pillows suit people who spend long stretches sitting in a car, plane, train or bus and want support for the head and neck. They also suit anyone who wants a supportive cushion for watching TV at home.

How to Use / Care

1. Use it for travel to support your neck while you sit.
2. Use it anywhere you want neck support, such as in the car or on a trip.

How to Choose

Start with where you will sit with it most, such as during car rides, flights, train trips or TV time at home. Black and Gray are the colors available for this pillow.

Frequently Asked Questions

What is the pillow made of?
It is made of memory foam and synthetic fiber. The memory foam molds to the natural curves of your body.

What colors does it come in?
It comes in Black or Gray.

Where can I use it?
It suits a plane, train, bus, car, or watching TV at home. It is for sitting and traveling for long periods.

What does it help with while I sit?
It helps maintain proper head and neck alignment while sitting and traveling.

Key Features

• 2 in 1 Phone Holder — It works as a 2 in 1 phone holder.
• Strong Phone Grip — It has a strong ability to hold your phone.
• Groove Scarf Hook — The groove can be used as a hook to hold your scarf or handbag.

Product Specifications

• Color: Black, Grey, Brown

What It Is / How It Works

Car seat headrest hooks are a common way to hang a purse, bag or backpack from the back seat. These hooks have a double hook design and a groove that can hold a scarf or handbag.

Who It's For / Use Cases

Car seat headrest hooks suit drivers and passengers who want a place to hang a purse, bag or backpack instead of leaving it on the floor. They suit families on long car trips where several bags need to stay within reach in the back seat.

How to Use / Care

1. Hook a scarf or handbag over the groove to hold it.

How to Choose

Choose hooks by the bags you carry most often, since a purse, handbag or backpack will hang from the hook. Headrest hooks suit anyone who wants bags kept off the floor during a trip.

It comes in black, grey and brown, so you can pick the shade that suits your seat.

Frequently Asked Questions

What colors does it come in?
It comes in black, grey and brown.

Can it hold a phone?
It works as a 2 in 1 phone holder and has a strong ability to hold your phone.

Does it fit most cars?
It is designed for most car models.

What can the groove hold?
The groove can be used as a hook to hold your scarf or handbag.

How many hooks does it have?
It has a double hook design.

Key Features

• Narrow Mesh Squares — The narrow mesh squares help keep small items from falling out of the net.
• Carabiner Hooks — The carabiner hooks can be moved from one mesh square to another to hold light loads.

Product Specifications

• Material: Latex silk
• Dimensions: 70x70cm / 110x60cm
• Pack Size: 1 piece

What It Is / How It Works

This trunk cargo net is a mesh net for securing loose items in a car trunk. It has narrow mesh squares and can be stretched over larger cargo items such as luggage. One trunk cargo net is sold per pack.

Who It's For / Use Cases

Trunk cargo nets suit drivers who carry loose items in the trunk and want them kept from sliding around. Owners who want to separate storage items from the rest of the cargo area may find this type of net useful for keeping groups of items apart.

How to Use / Care

1. Use the net to cover stable goods in the trunk.
2. Use the net to separate storage items from one another.
3. Stretch the net over larger cargo items such as luggage.
4. Fold the net for storage under a seat, in the trunk or in the garage.

How to Choose

Pick the size that fits the space you plan to cover. The two listed sizes are 70x70cm and 110x60cm, so compare them with the cargo you carry. Narrow mesh squares suit smaller items, while the net can be stretched over larger loads.

Frequently Asked Questions

What sizes does the net come in?
It comes in 70x70cm and 110x60cm sizes.

What is the net made of?
It is made of latex silk material.

How do the hooks attach?
The carabiner hooks buckle light loads and are moved from one mesh square to another.

How many nets are in one pack?
One pack contains one trunk cargo net.

Can the net hold heavy loads?
The hooks are meant for light loads, so the net suits light items such as small bags and loose storage items.

Key Features

• Flocked PVC Surface — The surface is soft flocked PVC.
• Between-Seat Safety Block — A safety block helps keep children from falling between the front seats.
• Broad Vehicle Fit — It is compatible with most cars, sedans, SUVs and mini vans.

Product Specifications

• Material: PVC
• Color: Beige, Black, Grey, Blue
• Size: 135 × 38 × 25 cm (53.1 × 15 × 9.8 in)

What It Is / How It Works

This inflatable car travel bed is an air mattress for the back seat area, made of PVC. It is compatible with most cars, sedans, SUVs and mini vans, and it suits long-distance travel and camping.

Who It's For / Use Cases

Car travel beds suit people who take long road trips, camping trips or outdoor adventures and want a flat place to rest in the back of a vehicle. They are also a practical choice for families who travel with children and want the rear seat area set up for lying down.

How to Use / Care

1. Use it in the back seat area of a car for long-distance travel, camping or adventures.

How to Choose

Start with fit: compare the rear seat area of your vehicle with the listed size of 135 × 38 × 25 cm (53.1 × 15 × 9.8 in) before you buy. If children will ride in the car, the between-seat safety block is a feature to look for. Pick the color that suits your vehicle interior, since beige, black, grey and blue are offered.

Frequently Asked Questions

What is it made of?
It is made of PVC with a soft flocked surface.

Which colors does it come in?
It comes in beige, black, grey and blue.

Does it fit my car?
It is compatible with most cars, sedans, SUVs and mini vans. Measure your rear seat area against its size of 135 × 38 × 25 cm (53.1 × 15 × 9.8 in).

What size is it?
It measures 135 × 38 × 25 cm (53.1 × 15 × 9.8 in).

Does it help keep children safe in the car?
It has a safety block that helps keep children from falling between the front seats.

Key Features

• Plastic Build — It is made of plastic, a lightweight material for hanging items in a vehicle.
• Tool-Free Setup — No tools or drilling are required, so you can set it up quickly.
• Keeps Items Secure — It helps keep umbrellas, tools, or other loose items from rolling around in the trunk.
• Two-Piece Pack — The pack contains 2 pcs.

Product Specifications

• Piece Count: 2 pcs
• Material: Plastic
• Color: Black, Red
• Size: 13 cm (5.1 in)
• Packaging: Packed in a bubble bag with no retail box

What It Is / How It Works

This car umbrella hook holder is a small plastic hook set for hanging items in a vehicle. The pack has 2 pcs and is designed for storing umbrellas and shopping bags in the trunk, helping keep the space organized.

Who It's For / Use Cases

Car umbrella hooks suit drivers who want a simple place to hang a wet umbrella without letting it drip across the trunk floor. They also suit people who carry shopping bags, or who make regular trips such as commutes and family outings and want loose items kept in one place.

How to Use / Care

1. Use it to hang a wet umbrella in the car trunk or interior.
2. Use it to hold shopping bags or other loose items in the trunk.

How to Choose

Choose car umbrella hooks by the items you plan to hang. A small hook suits a single umbrella or a few bags, while a pack of two gives you a hook for each side of the trunk. Plastic hooks are light and easy to move between vehicles. Pick the colour that fits your car's interior, since this set comes in black or red.

Frequently Asked Questions

What is the hook made of?
It is made of plastic.

How many pieces are in a pack?
The pack has 2 pcs, so you get two hooks in one order.

What size is each hook?
The listed size is 13 cm (5.1 in).

Do I need tools to install it?
No tools or drilling are required, so setup takes little time.

How is it packed?
It is packed in a bubble bag with no retail box.

Key Features

• Secure Rod Hold — Rod holder belts hold fishing rods securely on a car clothes bar or a DIY rod carrier.
• Quick Rod Loading — Rods can be loaded onto the rack within a few seconds, and the strap is simple to adjust and fasten.
• Textured Grip — The textured surface gives a firm grip and helps prevent slipping.
• Rod Diameter Range — It holds rod diameters from 0.8"-1.3" (2.0cm-3.5cm), fitting most fishing rod handles and common size clothes bars.
• Accessory Hanger Use — It can work as an additional hanger for accessories and holds up to 13lb/6kg.

Product Specifications

• Color: Black
• Piece Count: 2Pcs
• Weight: about 20g/piece
• Rod Diameter: 0.8"-1.3"/2.0cm-3.5cm
• Maximum Load: 13lb/6kg

What It Is / How It Works

These are rod holder belts sold as a set of 2Pcs. Each belt is a strap that wraps around a car clothes bar or a DIY rod carrier and holds fishing rods in place. The rod holder belt is a simple accessory for keeping rods secured while traveling.

Who It's For / Use Cases

Rod holder belts suit anglers who want to keep fishing rods fixed on a vehicle clothes bar or a DIY rod carrier instead of loose in the vehicle. They also suit anglers who have several rods to carry and want a simple strap system that adjusts to different handle sizes.

How to Use / Care

1. Use the belt to fix fishing rods on a car clothes bar or a DIY rod carrier.
2. Check that the rod handle falls within the 0.8"-1.3" (2.0cm-3.5cm) diameter range before fastening.

How to Choose

If you plan to hang extra gear on the belt, note the 13lb/6kg maximum load. The 2Pcs set gives you two belts to use across different rods or mounting points.

Frequently Asked Questions

What rod diameter does it hold?
It holds rod diameters from 0.8"-1.3" (2.0cm-3.5cm), so it fits most fishing rod handles and common size clothes bars.

How much weight can it hold?
When used as an additional hanger for accessories, it holds up to 13lb/6kg.

How much does each piece weigh?
Each piece weighs about 20g, and the set contains 2Pcs.

What color is it?
It is black.

Can it be used on a DIY rod carrier?
Yes, the belt is designed to fix fishing rods on a vehicle clothes bar or a DIY rod carrier.

Key Features

• Rainproof Feature — This bag carries a rainproof feature for wet-weather riding.
• Polyester Build — The bag is made from polyester.
• Personalization Option — Personalization is available on this bag.

Product Specifications

• Type: Top tube bag/bottom tube bag
• Material: Polyester
• Compatible models: Road Triangle Mountain

What It Is / How It Works

Top tube bags are small bicycle bags that sit on the top tube of a frame, where riders keep light items within easy reach during a ride.

This top tube bag is made from polyester and carries a rainproof feature, so it suits riders who want a compact bag on the frame.

Who It's For / Use Cases

Top tube bags suit cyclists who want a compact bag on the frame for small everyday items during rides. Riders who like the option of a personalized bag, or who ride in wet weather and want a rainproof bag, will find this type especially useful.

How to Use / Care

1. Use it as a bicycle top tube bag to carry small items on rides.

How to Choose

Start with the frame area you plan to use, since a top tube bag sits on the tube between the handlebars and the saddle and must suit that space.

Weigh the polyester build against your riding conditions, and consider the rainproof feature if you ride in wet weather. Choose the personalization option only if you want that finish on the bag.

Frequently Asked Questions

What material is this bag made from?
This bag is made from polyester, and it carries a rainproof feature.

Does this bag have a rainproof feature?
Yes. The bag carries a rainproof feature, and its material is polyester.

Can the bag be personalized?
Yes, personalization is available on this bag.

Does this bag have CE certification?
The bag carries CE certification, which is shown in the specifications above.

What kind of bag is this?
This is a top tube bag, also called a bottom tube bag, designed for bicycles.

Key Features

• Plastic Construction — The kit body is made of plastic.
• Non-Electric Design — This kit is not electric.

Product Specifications

• Material: Plastic

What It Is / How It Works

Car survival first aid kits are portable cases that people keep in a vehicle for roadside situations. Outdoor first aid kits for camping and hiking follow the same general idea: a compact set of supplies kept at hand on a trip. This car survival first aid kit fits within that category.

Who It's For / Use Cases

Car survival first aid kits suit drivers who want a compact kit within reach on road trips and commutes. Outdoor first aid kits suit campers and hikers who prefer to carry a dedicated kit on day trips and overnight outings. People who travel both by car and on foot may look for one kit that covers both settings.

How to Use / Care

1. Use this kit for the car survival, outdoor camping, and hiking purposes named in the title.

How to Choose

Start with the setting you travel in most. For road use, a kit that fits your vehicle space and is easy to reach matters most. For camping or hiking, consider how much you carry and how many people the trip covers. Material is another selection point, and this kit is plastic, so weigh that against your own preferences for the trips you plan.

Frequently Asked Questions

What is this kit made of?
The kit body is made of plastic. It is also not electric, so its design does not depend on a power connection.

Is this kit electric?
No. The kit is not electric, and its plastic construction is the material fact to note when comparing it with other kits.

Can I use it in the car and outdoors?
The title names car survival use along with outdoor camping and hiking use. The plastic construction and non-electric design apply to all three settings.

How should I choose between this kit and a general first aid kit?
Match the kit to the setting. The title names car survival and outdoor camping or hiking use, so pick the kit that fits those trips, then weigh its plastic material and non-electric design against your needs.

Key Features

• Combination Lock — It has an anti-theft combination lock and comes with a complimentary custom padlock.
• Quick-Release Mount — The quick-release bracket fits electric scooter front tubes or bicycle front forks.
• Top Handle Carry — The built-in top handle lets you carry the bag, and the bag detaches in one second.
• Water-Resistant Fabric — Water-resistant PU fabric and seamless zippers help keep items dry during heavy rain commutes.

Product Specifications

• Mounting: Quick-release bracket for electric scooter front tubes or bicycle front forks
• Lock: Anti-theft combination lock with a custom padlock

What It Is / How It Works

This handlebar bag attaches to electric scooter front tubes or bicycle front forks with a quick-release bracket. The bag detaches in one second and can be carried by its built-in top handle.

Who It's For / Use Cases

Handlebar bags suit cyclists and electric scooter riders who want a bag within reach while riding, for items such as phones, keys, wallets and other daily essentials. Riders who step away from their bike can use its combination lock and custom padlock.

How to Use / Care

1. Use it to carry daily items on a bike or electric scooter by clipping the quick-release bracket to the front fork or front tube.

How to Choose

Start with your ride. The bracket is made for electric scooter front tubes or bicycle front forks, so confirm your bike or scooter has one of those before buying. The bag has a combination lock and a complimentary custom padlock.

Frequently Asked Questions

What does the bag attach to?
It attaches to electric scooter front tubes or bicycle front forks with its quick-release bracket.

How does the lock work?
The bag has an anti-theft combination lock, and a custom padlock is equipped for extra security when you step away from your bike.

Will the bag keep items dry in rain?
The bag is made with water-resistant PU fabric and seamless zippers, which help keep items dry during heavy rain commutes.

How do I carry the bag off the bike?
The built-in top handle lets you carry the bag, and the bag detaches from the bracket in one second.

What protects the contents inside?
The shell is hard, and a 3D anti-pressure EVA structure helps protect chargers, electronics and daily essentials from drops and impacts.

Key Features

• Nylon Construction — The handle is made of nylon.
• Carrying Handle Type — This item is a carrying handle rather than a complete piece of luggage.

Product Specifications

• Material: Nylon
• Type: Handle

What It Is / How It Works

This replacement portable handle for suitcases is a nylon carrying grip. Luggage handles are the grips on suitcases and bags that let you lift and roll them by hand, and a replacement handle gives the bag a new point to grip.

Who It's For / Use Cases

Replacement luggage handles suit travelers and owners who have a worn or broken grip on a suitcase and want to restore a usable carrying point. They also suit anyone who wants to repair or refresh a bag by swapping in a new handle. Before ordering, confirm that the grip matches the layout of the bag it will go on.

How to Use / Care

1. Use it as a carrying handle on suitcase-style luggage.

How to Choose

Start by looking at the handle mounting points on your existing suitcase, including how far apart they sit, so the replacement matches the spacing. Nylon is the material for this handle, and buyers who compare grips often weigh material feel against leather or plastic options. Think about how you carry the bag most often, since a grip that suits a carry-on may not suit a large checked suitcase.

Frequently Asked Questions

What material is this handle made of?
The handle is made of nylon. Nylon is a synthetic material widely used in bag and luggage components.

Is this a replacement handle?
It is sold as a replacement portable handle for suitcases, meant to take the place of a worn or missing grip on a compatible bag.

Is this a complete suitcase?
No. The product type is a handle, a carrying grip rather than a whole piece of luggage.

How do I check that a handle will fit my luggage?
Measure the mounting points on your current handle and the spacing between them, then compare those measurements with the grip layout on the bag you plan to fix before you buy.

Key Features

• Rainproof Build — It is rainproof, so it suits wet-weather rides and damp commutes.
• Water-Resistant Fabric — Its water-resistant PU fabric and seamless zippers help keep valuables dry during heavy rain commutes.
• Anti-Theft Lock — The combination lock adds anti-theft security to the bag.
• Complimentary Padlock — A custom padlock is included for extra security when you step away from your bike.
• Quick-Release Bracket — The quick-release bracket fits electric scooter front tubes or bicycle front forks.

Product Specifications

• Shell: Hard shell
• Lock: Anti-theft combination lock
• Mounting: Quick-release bracket for electric scooter front tubes or bicycle front forks
• Carrying: Built-in top handle; bag detaches in one second
• Structure: 3D anti-pressure EVA structure

What It Is / How It Works

This handlebar bag is a hard-shell pouch that attaches to the front of an electric scooter or bicycle, so essentials stay within reach while you ride. Handlebar bags of this type are built to carry chargers, electronics and everyday items. It has a hard shell and a 3D anti-pressure EVA structure that helps protect contents from drops and impacts.

Who It's For / Use Cases

Handlebar bags suit commuters who ride electric scooters or bicycles and want a secure bag within reach. They also suit riders who carry chargers, phones or small electronics and want a lock option when they step away from the bike. Riders who prefer a quick-detach bag for carrying indoors will find this type practical.

How to Use / Care

1. Fit the quick-release bracket to the front tube of an electric scooter or the front fork of a bicycle.
2. Detach the bag in one second when you need to carry it by the built-in top handle.
3. Use the combination lock and padlock to secure the bag when you step away from your bike.

How to Choose

Start with your mount. Check whether your ride has a front tube or front fork that suits a quick-release bracket. Next, consider how much you need to carry. A hard-shell bag with an EVA structure suits electronics and chargers, while a soft pouch suits lighter items. If you ride in wet weather, look for a water-resistant fabric and sealed zippers.

Frequently Asked Questions

Is the bag rainproof?
It is rainproof. Its water-resistant PU fabric and seamless zippers help keep items dry during heavy rain commutes.

What does the bracket fit?
The quick-release bracket fits electric scooter front tubes or bicycle front forks.

Does it come with a lock?
It has an anti-theft combination lock and a complimentary custom padlock for extra security when you step away from your bike.

What is the bag made of?
It is made of polyester. The bag has a hard shell and a 3D anti-pressure EVA structure.

How do I carry the bag off the bike?
It has a built-in top handle, and you can detach the bag from the bracket in one second.

Key Features

• Two-Piece Set — Sold as a 2 set, so one purchase covers two pieces.

Product Specifications

• Piece Count: 2 set

What It Is / How It Works

This is a 2-set of hasp latches, the small metal fastening hardware used on wooden jewelry boxes, drawers, vintage suitcases and flight cases. A hasp latch is a hinged plate that swings over a staple and closes with a pin or small hook, giving a simple way to keep a lid or door shut. The set suits anyone who needs matching fasteners for a case restoration or a craft project.

Who It's For / Use Cases

Hasp latches like these suit people restoring vintage wooden boxes, hobbyists building decorative jewelry cases, and travelers or repairers who need a replacement latch for a suitcase or flight case. They also fit display boxes where a simple, visible metal closure looks right.

How to Use / Care

1. Use these hasps to hold the lid of a wood jewelry box closed.
2. Use them on drawers or drawer fronts where a simple latch is needed.
3. Use them on suitcase or flight case closures that take a hasp latch.

How to Choose

Choose by the case you are fitting. For a jewelry box or small drawer, look for a hasp that suits the thickness of the lid or front and the surface it will mount to. For a suitcase or flight case, pick a latch that suits the closure style and the weight the case carries. Compare the finish and plate shape with the rest of the hardware so the set looks consistent. Confirm the mounting method you plan to use before ordering.

Frequently Asked Questions

How many pieces are in this purchase?
The product is sold as a 2 set, so one purchase covers two pieces.

Do these need a battery?
No. Hasp latches are mechanical hardware and do not use a battery.

What is the difference between a hasp and a clasp?
A hasp is a hinged plate that folds over a staple, while a clasp is a closure that hooks or snaps shut, often on a bag or strap. Both keep a lid or case closed.

Can these be used on luggage?
Hasp latches are a common closure for luggage and flight cases. Check that the mounting surface on your case suits a hasp before fitting.

Are they suitable for vintage boxes?
Hasp latches have long been used on vintage wooden boxes and drawers, so a plain metal hasp suits older pieces and restoration work.

Key Features

• Nylon Material — It is made of nylon, a synthetic fiber used for carrying grips and handles.

Product Specifications

• Material: Nylon
• Compatible models: Luggage Replacement Portable

What It Is / How It Works

Replacement luggage handles are carry grips fitted to the body of a suitcase or travel bag. They give a hand grip for lifting and carrying the bag when the original grip is worn, loose or missing.

Who It's For / Use Cases

Replacement luggage handles suit people who have a suitcase or travel bag with a damaged or missing grip and want to restore its carrying function. They suit owners who prefer to replace only the grip rather than the whole bag.

How to Use / Care

1. Use it as a replacement carry handle on a suitcase.
2. Lift or roll the case by its grip when carrying it.

How to Choose

Start with the suitcase or bag the handle must fit. Check the fixing points on your current grip, such as the screw or rivet pattern and the spacing between them, and compare that with the replacement's mounting points before you buy. The spacing between the mounting points decides whether the handle lines up with the bag.

Frequently Asked Questions

What is the handle made of?
It is made of nylon, which is the material given for this handle.

What is the handle used for?
It is a replacement carry handle for a suitcase. It gives a hand grip for lifting the case when the original grip is worn or missing.

How do I check that it will fit my suitcase?
Measure the screw or rivet pattern on your current grip and the spacing between its fixing points. Compare those measurements with the mounting points on the replacement before you order, since the spacing decides whether the handle lines up.

Can I replace only the grip and keep the bag?
Yes, a replacement handle is designed to swap the grip alone. Confirm the mounting spacing on your bag first so the new grip sits in the same place as the old one.

Is it suitable for lifting heavy luggage?
The handle is a carry grip, so its strength depends on how it is fixed to the bag. Check that the mounting points are secure before lifting a full case.

Key Features

• Rain-Resistant Build — The water-resistant fabric and seamless zippers keep items dry during heavy rain commutes.
• Impact-Guarding Interior — A 3D anti-pressure EVA structure helps protect chargers, electronics and everyday items from drops and impacts.
• Front Tube Mount — The quick-release bracket fits electric scooter front tubes or bicycle front forks.
• Bag Detaches One — The bag detaches in one second and has a built-in top handle for carrying.
• Combination Lock — An anti-theft combination lock helps secure the bag when you step away from your bike.

Product Specifications

• Water resistance: Rainproof
• Shell: Hard shell
• Lock: Anti-theft combination lock
• Accessory: Complimentary custom padlock

What It Is / How It Works

This handlebar bag has a hard shell and mounts to the front of a bicycle or electric scooter. The quick-release bracket fits electric scooter front tubes or bicycle front forks.

Who It's For / Use Cases

Handlebar bags suit riders who want small items within reach while cycling or riding an electric scooter. They also suit commuters who ride in wet weather and want a bag they can lift off the handlebars and carry away from the bike.

How to Use / Care

1. Use it to carry small items on the front of a bicycle or electric scooter.
2. Detach the bag from the bracket in one second and carry it by the built-in top handle when you leave the bike.

How to Choose

Start with the mount. Check that your scooter front tube or bicycle front fork matches the quick-release bracket before you buy. A hard-shell bag suits fragile or heavy items, while a lighter bag is easier to lift on and off the bike.

Frequently Asked Questions

What is the bag made of?
It is made of polyester with a hard shell and a 3D anti-pressure EVA interior structure.

Does it fit on a scooter or bicycle?
The quick-release bracket fits electric scooter front tubes or bicycle front forks.

Does it come with a lock?
It has an anti-theft combination lock and is equipped with a complimentary custom padlock.

Does it keep items dry in the rain?
It is rainproof. The water-resistant fabric and seamless zippers keep items dry during heavy rain commutes.

How do you carry it off the bike?
It detaches in one second and has a built-in top handle for carrying.

Key Features

• Bottom Plate Handle — It is a handle for the bottom plate of the rear trunk tail cover.
• Direct Replacement Part — It is a direct replacement part for the rear trunk mat handle.

Product Specifications

• Material: ABS+PC
• Manufacturer Part Number: 51479120283
• OEM Number: 51477256772
• Placement on Vehicle: Rear
• Fitment Type: Direct Replacement
• Compatible models: BMW X5 E70 (2006–2013), X6 E71 (2007–2014), X5 E60 (2002–2010), X5 F15 (2013–2018), X6 F16 (2014–2019)

What It Is / How It Works

This rear trunk mat handle is a replacement handle for the floor carpet in the rear luggage area of BMW X5 and X6 vehicles. It is a bottom plate handle for the trunk tail cover.

Who It's For / Use Cases

Trunk mat handles like this one suit BMW X5 and X6 owners who need a replacement handle for the rear floor carpet. Owners who prefer a direct replacement part over a generic handle can check the model and year range against their own vehicle before ordering. Shoppers comparing parts for the rear luggage area will find the fitment details in the specifications.

How to Use / Care

1. Use it as a replacement rear trunk mat handle on the BMW X5 or X6 models listed in the specifications.

How to Choose

Start by matching the model and year range in the specifications to your vehicle. Car versions differ between countries, so confirm the chassis code and model years before ordering. Choose this direct replacement part when you need a handle for the rear trunk floor carpet that matches your BMW X5 or X6.

Frequently Asked Questions

Which BMW models is it made for?
It fits the BMW X5 E70 (2006–2013), X6 E71 (2007–2014), X5 E60 (2002–2010), X5 F15 (2013–2018) and X6 F16 (2014–2019).

Are installation instructions included?
Installation instructions are not included. Professional installation is highly recommended.

What is the handle made of?
It is made of ABS+PC plastic.

Which part numbers does it match?
The manufacturer part number is 51479120283, and the OEM number is 51477256772. Both are listed in the specifications.

How much does it weigh?
It weighs 220 g (0.49 lb).

Key Features

• Sturdy Build — These pads are made from high-density PVC in a one-piece design that resists cracking under pressure while keeping strong load-bearing ability.
• Anti-Slip Grip — The anti-slip texture helps keep the pad in place, even on wet ground, reducing the chance of shifting while the jack is down.
• Easy Setup — Setup is straightforward and quick, so you can get support under the jack without complicated steps.
• Versatile Use — These pads work across a range of setups and are suited for use with trailers and campers in many situations.

Product Specifications

• Piece Count: 4 pack
• Material: High-density PVC
• Dimensions: about 23x17cm / 9.06x6.69 inches

What It Is / How It Works

These are RV jack pads, sold as a set of four. They sit under the leveling jacks of a trailer or camper to spread the load and help keep the vehicle stable on uneven ground.

Who It's For / Use Cases

RV jack pads are useful for anyone who parks a travel trailer, camper, or motorhome on soft or uneven surfaces. Campers, road-trippers, and seasonal site users often carry a set to make setup more stable and to protect the ground under the jacks.

How to Use / Care

1. Place a pad on the ground where the jack will make contact, making sure the surface is as level as possible.
2. Lower the jack so it rests on the center of the pad, then continue leveling as you normally would.

How to Choose

When choosing jack pads, consider the size of your jacks and the type of ground you usually park on. Larger pads spread weight over a wider area, which helps on soft soil. Think about how many jacks your rig has and whether a four-pack covers them.

Frequently Asked Questions

How many pads come in this set?
This set includes four pads. Each pad measures about 23x17 cm (9. 06x6. 69 inches).

What are these pads made of?
They are made from high-density PVC in a one-piece design that resists cracking under pressure while keeping strong load-bearing ability.

Do they work on wet ground?
The anti-slip texture helps maintain grip even in wet conditions, reducing the chance of the pad sliding while the jack is down.

Keep your bike tires properly inflated with a reliable valve core set designed for German-style bicycle valves. This 10-piece kit includes everything you need to replace worn or leaking Dunlop Blitz valves on city bikes, e-bikes, and mountain bikes.

Made from high quality stainless steel, these valve cores resist corrosion and rust for long-lasting performance. Each set includes valve cores, rims, nuts, and valve caps so you have all the essential parts for a complete valve replacement. The compact design fits easily in your pocket or repair kit, making it a practical choice for long rides and on-road repairs.

Whether you ride a Dutch bike, a vintage English bicycle, or a modern e-bike with a Dunlop-style valve, this kit provides a simple and effective solution for preventing air leakage. Just remove the old valve and install the new core to restore proper tire pressure and keep your ride smooth.

Key Features and Benefits

- Stainless steel construction that resists corrosion and rust for extended durability

• 10-piece set that includes valve cores, rims, nuts, and valve caps for a complete replacement

• Compatible with German Dunlop, Dutch, wooden, and conventional bicycle valves for broad use

• Compact size that fits in any pocket or repair bag for convenient travel and roadside fixes

• Simple installation that lets you replace worn or leaking valves without special tools

Who Is This For

- Cyclists who own city bikes, e-bikes, mountain bikes, or racing bikes with German-style valves

• Riders who need a reliable spare valve set for long-distance touring or daily commuting

• Bike owners with old or leaking Dunlop Blitz valves looking for an easy replacement solution

• Anyone who prefers to carry a complete valve repair kit instead of individual parts

Usage Scenario

You are preparing for a weekend bike tour through the countryside. During a pre-ride check, you notice one of your tires is losing air slowly. Instead of canceling the trip, you pull out this valve core set, remove the old leaking valve, and install a new stainless steel core along with a fresh cap. The repair takes just a few minutes, and you are back on the road with properly inflated tires for the entire ride.

Micro Comparison

Many standard valve cores are made from brass or plastic that can corrode or crack over time. This set uses stainless steel for better durability and corrosion resistance. It also includes all the necessary components in one package, so you do not need to buy valve cores, rims, nuts, and caps separately.

Specifications

Material: Stainless Steel

Compatibility: German Dunlop valve, Dutch valve, wooden valve, conventional valve

Package Includes

- 10x Bicycle Tyre Pump Adapter

• 10x Rims

• 10x Nuts

• 10x Valve Caps

Why You Will Love It

This complete valve core set gives you peace of mind on every ride. The stainless steel build means you will not have to worry about rust or corrosion ruining your tires. With all the parts included in one convenient pack, you can fix a leaking valve quickly and get back to enjoying your bike.

Questions and Answers

Question: What type of valves are these compatible with?

Answer: These valve cores work with German Dunlop valves, Dutch valves, wooden valves, and conventional bicycle valves.

Question: Are these made from stainless steel?

Answer: Yes, the valve cores are made from high quality stainless steel that resists corrosion and rust.

Question: How many pieces come in this set?

Answer: The set includes 10 valve cores, 10 rims, 10 nuts, and 10 valve caps for a total of 40 pieces.

Question: Can I use these on a mountain bike?

Answer: Yes, they fit mountain bikes that use a German-style or Dunlop Blitz valve type.

Question: Do I need any special tools to install these?

Answer: No special tools are required. Simply remove the old valve and install the new core by hand.

Question: Will these fit an e-bike?

Answer: Yes, these valve cores are compatible with e-bikes that have a Dutch or Dunlop-style valve.

Key Features

• Keychain Attachment — It stays attached to your keys, so the gauge is always within reach.
• Four Measurement Units — It reads PSI, Kpa, Bar and kg/cm2 to work with different vehicle standards.
• Safety Alarm — The alarm alerts you when tire pressure needs attention.
• Auto Power Off — It turns off when not in use, which extends battery life.

Product Specifications

• Material: ABS engineering plastic
• Color: Black
• Pressure range: 2 to 150 PSI
• Measurement units: PSI, Kpa, Bar, kg/cm2
• Display: LCD
• Power: CR-2025 3V lithium battery (included)

What It Is / How It Works

This mini digital tire pressure gauge is built as a keychain tool. It helps you check tire pressure quickly, and the LCD screen shows clear readings in four different units.

Who It's For / Use Cases

It suits car owners who want a simple way to check tire pressure before long trips. It also suits motorcycle riders who need a portable gauge that fits in a jacket pocket, and people who prefer digital accuracy over analog stick gauges.

How to Use / Care

1. Place the nozzle over the tire valve.
2. Press firmly to create a seal, and hold until the LCD reading locks.
3. Remove the gauge and read the pressure.
4. The CR-2025 3V lithium battery is already installed, and the auto power off feature turns the gauge off when it is not in use.

How to Choose

Choose a compact keychain gauge if you want a tire gauge that stays with your keys. The 2 to 150 PSI range covers most car and motorcycle tire pressure needs. Pick the unit you prefer, since the gauge reads PSI, Kpa, Bar and kg/cm2.

Frequently Asked Questions

What units does this gauge measure in?
It measures in PSI, Kpa, Bar, and kg/cm2. You can switch between units as needed.

Does this gauge come with a battery?
Yes, it includes a CR-2025 3V lithium battery that is already installed.

Can I attach this to my keychain?
Yes, the gauge has a built-in keychain loop so you can attach it to your keyring or car keys.

What is the pressure range of this gauge?
It measures from 2 to 150 PSI, which covers most car and motorcycle tire pressure needs.

How do I use this tire gauge?
Place the nozzle over the tire valve, press firmly to create a seal, and hold until the LCD reading locks. Remove the gauge and read the pressure.

Key Features

• Illuminated Dial — The dial is illuminated, so the gauges can be read in the dark.
• Sensors for Accurate Readings — High sensitivity sensors read water temperature, oil pressure and voltage.
• Three Gauges in One Kit — The kit includes a water temp gauge, a voltmeter gauge and an oil pressure gauge, along with the sensors and an English manual.
• Oil Pressure Range — The oil pressure gauge measures 0-7KG.

Product Specifications

• Color: White Face and Chrome Case
• Material: Aluminum
• Dimensions: 2 Inch / 52mm
• Oil Pressure Measure Range: 0-7KG
• Volt Measure Range: 8-16V
• Water Temperature Range: 40 to 120 degrees Celsius
• Voltage System: DC 12V
• Kit Contents: 1 water temp gauge, 1 oil pressure gauge, 1 voltmeter gauge, 1 temp sensor, 1 pressure sensor, 1 English manual

What It Is / How It Works

This Chrome Triple Gauge Kit is a set of three analog vehicle gauges: a water temperature gauge, a voltmeter and an oil pressure gauge, each 2 inches (52mm) across. It includes two sensors and an English manual.

Who It's For / Use Cases

Car enthusiasts who want a stylish gauge setup for their vehicle suit this kit. DIY mechanics who want one kit to monitor water temperature, oil pressure and voltage will find it useful. Drivers of classic cars or custom builds who need analog gauges they can read at a glance are a fit, as are owners replacing a damaged or inaccurate factory gauge system.

How to Use / Care

1. After installing the kit, read the water temperature, oil pressure and battery voltage on the gauges.
2. Read the water temperature gauge, which measures from 40 to 120 degrees Celsius.

How to Choose

Choose this kit if you want water temperature, oil pressure and voltage monitored in one set. Check that your vehicle runs a DC 12V system, since the gauges are designed for it. The 2 inch (52mm) gauge size and the 0-7KG oil pressure and 40 to 120 degrees Celsius water temperature ranges are the figures to compare against the readings you need.

Frequently Asked Questions

What size are these gauges?
Each gauge has a diameter of 2 inches, which is 52mm.

What does the kit include?
It includes a water temp gauge, oil pressure gauge, voltmeter, a temp sensor, a pressure sensor, and an English manual.

What color is the gauge face and case?
The gauge face is white and the case is chrome.

What voltage do these gauges run on?
They are designed for a DC 12V system.

What is the water temperature range?
The water temperature gauge measures from 40 to 120 degrees Celsius.

Key Features

• Dial Backlight — The dial has a white backlight, so the numbers and pointer can be read in the dark.
• Responsive Sensors — High-sensitivity sensors give accurate, responsive readings, so changes in engine condition show up quickly.
• Chrome Shell and White Face — The gauges have a chrome shell and a white face, which gives the dashboard a clean look.
• 52mm Gauge Size — Each gauge measures 52mm (2 inches) across.

Product Specifications

• Dimensions: 2 inches / 52mm
• Color: Chrome shell, white face
• Backlight: White
• Fitment: All 12V cars
• Warranty: 6 Months
• Package contents: 1 water temp gauge, 1 oil pressure gauge, 1 voltmeter gauge, 1 temp sensor, 1 pressure sensor, 1 English manual

What It Is / How It Works

This triple gauge kit is a set of three car gauges: a voltmeter, a water temperature gauge and an oil pressure gauge, with the sensors they need. The oil pressure and water temperature gauges are mechanical, and the voltmeter is electrical.

Who It's For / Use Cases

It suits car enthusiasts who want aftermarket gauges to monitor voltage, coolant temperature and oil pressure. It suits drivers of older cars or project vehicles that lack digital monitoring systems and need analog gauges.

How to Use / Care

1. Mount the triple gauge kit in the dashboard slot.
2. Connect the oil pressure gauge's mechanical line to the engine's oil pressure port.
3. Use the included temperature sensor for the water temp gauge.
4. Watch the voltmeter, water temperature and oil pressure readings while you drive.

How to Choose

Choose this kit if you want all three readings in one matching set. Check that your dashboard has room for 52mm (2 inches) gauges before you buy. Decide whether you want mechanical or electrical readings, since the oil pressure and water temperature gauges are mechanical and the voltmeter is electrical.

Frequently Asked Questions

Will this kit work on a 12V diesel truck?
It fits all 12V vehicles, including diesel trucks, as long as you have space for the 52mm gauges.

Does the water temp gauge come with a sensor?
Yes, the kit includes a dedicated temperature sensor for the water temp gauge.

Are the gauges mechanical or electrical?
The oil pressure and water temperature gauges are mechanical. The voltmeter is electrical.

Is the chrome finish real chrome or plastic?
The shell is made from ABS and iron with a chrome-like finish.

How do I install the oil pressure gauge?
The oil pressure gauge uses a mechanical line that connects to the engine's oil pressure port. The kit includes the necessary fittings and tubing.

Keep track of your engine's running time with this compact digital LCD hour meter. Designed for a wide range of gasoline engines, it helps you schedule maintenance like oil changes and spark plug replacements at the right intervals. The waterproof and shock-resistant casing ensures reliable performance in tough conditions, from dirt bikes to marine boats.

This hour meter is simple to install with a peel-and-stick method. It connects directly to your spark plug wire, so there is no need for an external battery. The display records up to 9,999.9 hours and automatically rolls over, giving you a long-term view of engine usage without manual tracking.

The 100% epoxy encapsulated casing resists water, shock, and high temperatures up to 85°C. An hour glass symbol flashes on the screen to confirm the meter is actively counting time. This makes it easy to verify operation at a glance, even in low-light conditions.

Whether you ride an ATV, snowmobile, or operate a gas-powered boat, this device provides a simple way to monitor engine hours. It helps you stay on top of preventive maintenance, which can extend the life of your vehicle and improve reliability.

Key Features and Benefits

- No battery needed that connects directly to the spark plug wire for hassle-free installation

• 100% epoxy encapsulated casing that resists water, shock, and fire up to 85°C for durability in harsh environments

• Records up to 9,999.9 hours with automatic roll over for long-term engine tracking

• Hour glass symbol flashes on and off to indicate active counting so you know it is working

• Easy peel-and-stick mounting that requires no drilling or wiring for quick setup

Who Is This For

- Motorcycle and dirt bike owners who want to track engine run time for maintenance scheduling

• ATV and snowmobile riders who need a reliable hour meter for off-road vehicles

• Marine and boat operators who require a waterproof display for saltwater environments

• Lawn mower and gas engine equipment users who want to monitor service intervals

Usage Scenario

Mark owns a small fishing boat and often spends weekends on the water. He used to guess when to change the oil or replace the spark plugs, but after installing this hour meter, he now knows exactly how many hours his engine has run. The meter stuck easily to his dashboard and started counting as soon as he connected it to the spark plug wire. Now he schedules maintenance based on actual usage, which has reduced unexpected breakdowns.

Micro Comparison

Unlike digital timers that require batteries or complex wiring, this hour meter gets power directly from the spark plug wire. Its epoxy sealed casing provides better water and shock resistance compared to basic plastic models, making it suitable for marine and off-road use. The large LCD display is easy to read and shows tenths of an hour for precise tracking.

Specifications

- Material: Plastic

• Color: Black

• Item size: 54 x 35 x 14 mm / 2.1 x 1.4 x 0.6 in

• Package size: 176 x 101 x 15 mm / 6.9 x 4.0 x 0.6 in

• Item weight: 52 g / 1.8 oz

• Resolution: 0.1 hour

• Maximum display: 9,999.9 hours

• Temperature resistance: Up to 85°C / 185°F

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x Hour meter

• 1 x Wire

• 2 x Screws

Why You Will Love It

You will appreciate how simple it is to install and use, with no batteries to replace or complicated wiring. The durable waterproof casing gives you confidence that it will last through rain, mud, and splashes. Knowing your engine hours helps you take better care of your vehicle, so it runs longer and more reliably.

Questions and Answers

Question: Does this hour meter work on a 2-stroke engine?

Answer: Yes, it works on any gasoline engine including 2-stroke and 4-stroke models.

Question: How do I install this on my motorcycle?

Answer: Clean the surface, peel the backing, and stick the meter to a flat area. Then wrap the wire around the spark plug cable.

Question: Will the display work if it gets wet?

Answer: Yes, the casing is waterproof and sealed with epoxy, so it can handle rain and splashes.

Question: Can I reset the hour reading?

Answer: No, this model does not have a reset function. It records continuously and rolls over after 9,999.9 hours.

Question: Does it work on a diesel engine?

Answer: No, this meter is designed for spark plug ignition systems found in gasoline engines only.

This digital tach hour meter gives you a simple way to track engine speed and run time on your motorcycle, chainsaw, or other gasoline-powered equipment. The inductive clip design attaches directly to the spark plug wire, making installation quick and tool-free. It is waterproof and built to handle tough outdoor conditions, so you can rely on it for accurate readings job after job.

Keeping an eye on RPM and hours helps you stay on top of maintenance. This meter shows real-time engine speed up to 99,999 RPM and logs total run time up to 10,000 hours before resetting. The large LCD display is easy to read, even in bright sunlight. You can also set a programmable maintenance reminder that triggers a service icon when it is time for an oil change or other routine service.

The unit works with both two-stroke and four-stroke gasoline engines, making it a versatile tool for mechanics and DIY users. The anti-flicker technology ensures a stable reading, while the simple button controls let you select the motor type and adjust settings without any hassle. It is a practical upgrade for anyone who wants to monitor engine performance and extend equipment life.

Please avoid direct contact with water to protect the electronic components. The compact size and clip-on design mean you can move it between machines or leave it installed permanently on your most-used equipment.

Key Features and Benefits

- Inductive clip attachment that wraps around the spark plug wire for fast, no-tool installation

• Large LCD display that shows RPM up to 99,999 and run time up to 10,000 hours for clear data at a glance

• Programmable maintenance timer with service icon that reminds you when to change oil or perform other services

• Anti-flicker technology that delivers stable, accurate readings even on high-vibration engines

• Compatible with two-stroke and four-stroke gasoline engines up to 25,000+ RPM for broad use across equipment

Who Is This For

- Motorcycle owners who want to track engine hours and RPM for better maintenance planning

• Chainsaw operators who need a rugged, waterproof tachometer for field use

• Small engine mechanics and technicians who work on ATVs, snowmobiles, boats, and other gasoline-powered machines

• DIY enthusiasts who prefer a simple clip-on install without wiring or special tools

Usage Scenario

Mark runs a small landscaping business and depends on his chainsaw every day. He used to guess when it needed an oil change, often forgetting until the engine started running rough. After clipping this inductive tach hour meter onto the spark plug wire, he now sees exact run time and RPM on the large display. The service icon lights up right when it is time for maintenance, so he never misses a service interval. His chainsaw runs smoother and lasts longer, and he saves money on unnecessary repairs.

Micro Comparison

Unlike wired tachometers that require splicing into the ignition system, this clip-style meter installs in seconds without any electrical work. Many basic hour meters only track time and lack RPM readout, but this unit gives you both along with a programmable maintenance reminder. The waterproof design and anti-flicker technology make it more reliable in outdoor and high-vibration environments than standard budget tachometers.

Specifications

Material: ABS

Item Length: 52 mm / 2.0 in

Item Width: 46 mm / 1.8 in

Item Height: 20 mm / 0.8 in

Item Weight: 0.053 kg / 1.9 oz

Special Features: Digital Engine Tach Hour Meter

Interchange Part Number: Clip Style Tachometer

Package Includes

- 1 x Digital Tach Hour Meter

Why You Will Love It

You get accurate RPM and run time data without complicated wiring or expensive tools. The clip-on design lets you install it in seconds and move it between machines as needed. With the programmable maintenance reminder, you will never forget an oil change again, keeping your engine running strong for years.

Questions and Answers

Question: How do I install this tachometer on my motorcycle?

Answer: Simply clip the inductive pickup around the spark plug wire. No tools or wiring are required. The meter will start reading RPM once the engine runs.

Question: Does this meter work on a four-stroke engine?

Answer: Yes, it works on both two-stroke and four-stroke gasoline engines.

Question: What is the maximum RPM this tachometer can read?

Answer: It can read up to 99,999 RPM and is suitable for engines running up to 25,000+ RPM.

Question: How do I set the maintenance reminder?

Answer: Use the S1 and S2 buttons to program the service interval. When the set time is reached, a service icon will appear on the display.

Question: Is this tachometer waterproof?

Answer: It is designed to be waterproof for outdoor use. However, please avoid direct contact with water to protect the electronic components.

Check how much infrared heat your car window tint actually blocks with this compact handheld infrared power meter. It gives you a clear numeric reading so you can test solar film, window glass, or vinyl wrap performance on the spot.

This device combines an IR transmission meter and an IR power meter in one tool. It measures infrared optical power density across a 1000nm to 1700nm wavelength range. The display shows real-time infrared power values and calculates the infrared blocking rate when you press the zero button.

The housing is made from durable ABS plastic and the meter runs on 4 AAA batteries (not included due to shipping restrictions). It features a simple button layout with a power switch, a zero key, and a hold key to lock the reading on screen. Use it to compare different tints and verify the heat rejection quality of films before or after installation.

Whether you are a window tinter, a car detailer, or a DIY car enthusiast, this tool gives you a reliable visual reference to evaluate insulation performance. It helps you avoid guesswork and make informed decisions about which film or tint delivers real heat reduction.

Key Features and Benefits

- Two-in-one function that works as both an IR transmission meter and an IR power meter for versatile testing

• Measures infrared power density with a spectral response of 1000nm to 1700nm for accurate heat rejection analysis

• Simple one-button operation with power switch, zero key, and hold key for easy field use

• Compact ABS housing that is lightweight and portable for on-the-go testing at shops or job sites

• Wide power range from 0 to 40000W/m² and infrared blocking rate display from -999% to 100% for comprehensive readings

Who Is This For

- Auto window tint installers who need to verify the insulation quality of the film they apply

• Car owners who want to test the heat rejection of their existing window tint or solar film

• Vinyl wrap and glass coating professionals checking the thermal performance of their materials

• DIY enthusiasts comparing different brands or grades of window film before making a purchase

Usage Scenario

Mark just finished installing a new ceramic window tint on a customer's sedan. Before handing the car back, he pulls out his infrared power meter, presses the zero button, and places the sensor against the glass. The display shows a 92% infrared blocking rate. He takes a photo of the reading and shows the customer exactly how much heat rejection the new film provides. The customer leaves confident that the tint will keep the cabin cooler during summer.

Micro Comparison

Unlike generic light meters that only measure visible light, this infrared power meter specifically targets the infrared spectrum responsible for heat buildup inside a vehicle. It gives you a direct numerical value for infrared blocking rate and power density, so you are not relying on subjective feel or vague product claims. This makes it a practical choice for professionals and enthusiasts who want verifiable data about their window film performance.

Specifications

- Material: ABS

• Color: Alternating red and gray

• Voltage: 12V

• Accuracy Class: ±10%

• Operating Temperature: -20°C ~ +70°C

• Dimensions: 12.4cm x 6.9cm x 2.45cm

• Infrared Blocking Rate: -999% ~ 100%

• Power Range: 0 ~ 40000W/m²

• Spectral Response: 1000 ~ 1700nm

• Photosensitive Aperture: 10mm

• Working Power: 4pcs AAA battery (not included)

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x Infrared power meter (battery not included)

Why You Will Love It

You get a clear, measurable way to confirm that your window tint or solar film is actually blocking infrared heat. No more guessing if a film is worth the investment. It is a small tool that gives you big confidence in your tinting choices and helps you explain performance to customers or friends with real numbers.

Questions and Answers

Question: Does this meter come with batteries?

Answer: No, batteries are not included due to shipping restrictions. You need to provide 4 AAA batteries yourself.

Question: Can I use this to test the tint on my house windows?

Answer: Yes, you can test any transparent material including home window solar films and glass.

Question: What does the infrared blocking rate number mean?

Answer: It shows the percentage of infrared radiation that the film or glass blocks. A higher number means better heat rejection.

Question: How do I get a reading on the display?

Answer: Load 4 AAA batteries, press the power switch, point the sensor at the light source, then press the zero key to see the blocking rate.

Question: Is this meter accurate for professional use?

Answer: Yes, it has an accuracy class of ±10% and a spectral response from 1000nm to 1700nm, making it suitable for professional tint evaluation.

Track your engine's performance with this compact digital tachometer and hour meter. Designed for gasoline engines with spark plugs, it provides real-time RPM readings and total run time to help you stay on top of maintenance schedules. The inductive pickup design makes installation simple and tool-free.

This tachometer is built for durability with an ABS housing and a clear LCD display with backlight adjustment. It measures RPM up to 30,000 and tracks hours up to 99,999. The unit is powered by a built-in CR2450 battery and includes a sensing cable that wraps around your spark plug wire for accurate readings.

Whether you ride a motorcycle, ATV, snowmobile, or run a boat, this gauge gives you the data you need to monitor engine health and plan service intervals. The included English manual walks you through setup and operation. Choose between stroke modes to match your engine type.

Key Features and Benefits

- Inductive pickup design that wraps around the spark plug wire for quick, no-drill installation

• LCD display with backlight adjustment for easy reading in low light conditions

• Measures RPM up to 30,000 and total hours up to 99,999 for complete engine monitoring

• Built-in CR2450 battery for cordless operation and easy replacement

• ABS housing that resists vibration and light impacts in demanding environments

• Selectable stroke mode to match 2-stroke or 4-stroke gasoline engines

Who Is This For

- DIY mechanics who want a simple way to monitor engine RPM and run time

• ATV and motorcycle owners who need to track maintenance intervals

• Boat owners with gasoline outboard engines who want a compact gauge

• Snowmobile riders looking for a durable tachometer that works in cold conditions

Usage Scenario

Jake noticed his ATV felt sluggish on the trails but had no way to check engine performance. He ordered this digital tachometer, wrapped the sensing wire around the spark plug, and within minutes had live RPM data. The hour meter helped him realize it was time for an oil change based on actual run time, not guesswork. Now he rides with confidence knowing exactly when to service his engine.

Micro Comparison

Unlike bulky wired tachometers that require hardwiring into your electrical system, this unit uses an inductive pickup that simply wraps around the spark plug wire. The built-in battery means no extra wiring is needed. The LCD display with backlight gives you clear readings without straining to see analog needles in bright sun or darkness.

Specifications

Material: ABS

Power: Built-in CR2450 battery, DC 3.0V

RPM Range: Within 30,000 RPM

Hour Range: Less than 99,999 hours

Display: LCD with backlight adjustment

Sensing Distance: 3-5 cm / 1.2-2.0 in

Cable Length: Approximately 1.0 m / 39.4 in

Compatibility: All gasoline engines with spark plugs

Stroke Modes: Selectable for 2-stroke or 4-stroke engines

Package Includes

- 1 x Tachometer meter (includes clip and cable)

• 1 x English instruction manual

Why You Will Love It

You get a reliable engine monitor without complicated wiring or expensive shop tools. The inductive pickup installs in seconds, and the backlit LCD is easy to read in any light. Knowing your exact RPM and run time helps you maintain your engine properly, saving money on repairs and extending the life of your vehicle.

Questions and Answers

Question: Does this tachometer work on a 2-stroke engine?

Answer: Yes, the stroke mode is selectable so it works on both 2-stroke and 4-stroke gasoline engines.

Question: How do I install the sensing wire?

Answer: Wrap the cable a few times around the spark plug wire. The inductive pickup reads the signal without cutting or splicing any wires.

Question: Is the display bright enough for daytime use?

Answer: Yes, the LCD display includes backlight adjustment so you can see it clearly in sunlight or at night.

Question: How long does the battery last?

Answer: The built-in CR2450 battery provides long service life, and it can be replaced when needed.

Question: Will this work on a boat with an outboard motor?

Answer: Yes, it works on any gasoline engine with a spark plug, including outboard boat motors.

Replace your worn-out or damaged car door window seals with this direct replacement weather strip, specifically designed for the Hyundai IX35 (2010-2015). This set of four rubber trims provides a strong waterproof barrier, helping to keep your cabin dry and reduce road noise for a more comfortable drive.

Made from durable rubber and plastic, these sealing strips are built to last. They are colorfast and sturdy, offering a long-term solution to common issues like window shaking, rattling, and water leaks. The trim is easy to install and matches the original factory specifications for a perfect fit.

Designed for the front and rear doors on both the left and right sides of your IX35, this kit includes everything you need to refresh your vehicle's window seals. Upgrade your car's protection and enjoy a quieter, cleaner interior with this practical car accessory.

Key Features and Benefits

- Strong waterproof performance that effectively prevents rain and moisture from entering your car door.

• Easy installation as a direct replacement part, designed to match the original factory specifications.

• Colorfast and durable rubber material that resists fading and wear over time.

• Noise reduction that helps minimize window rattle and wind noise for a quieter ride.

• Stable performance and high reliability, making it a suitable replacement for your broken or old weather strip.

Who Is This For

- Hyundai IX35 owners with model years 2010 to 2015 looking for a direct replacement seal.

• Drivers experiencing water leaks or whistling noises from their car windows.

• Car owners wanting to restore the original weatherproofing of their vehicle's doors.

• DIY enthusiasts looking for an easy-to-install, cost-effective car maintenance part.

Usage Scenario

After a heavy rainstorm, Mark noticed a small puddle of water on his driver-side floor mat. The rubber seal around his Hyundai IX35's window had become brittle and was no longer keeping water out. He ordered this replacement weather strip set, removed the old trim, and snapped the new one into place in just a few minutes. Now, his cabin stays dry, and the annoying wind noise at highway speeds is gone.

Micro Comparison

Unlike generic universal seals that require cutting and gluing, this weather strip is a direct replacement part specifically molded for the Hyundai IX35 2010-2015. It ensures a precise fit without the guesswork, saving you time and providing a reliable, long-lasting seal.

Specifications

Material: Rubber, Plastic

Color: Black

Vehicle Placement: Front, Rear (Left and Right)

Mounting Type: Direct Replacement

Package Includes

- 1 x Window Weather Strip (4 pieces total)

Why You Will Love It

You will love the peace of mind that comes with a dry, quiet cabin. This simple upgrade protects your car's interior from water damage and makes every drive more comfortable. It is an affordable way to fix a common problem without a trip to the mechanic.

Questions and Answers

Question: Will this fit my 2012 Hyundai IX35?

Answer: Yes, this weather strip is designed for the Hyundai IX35 models from 2010 to 2015.

Question: How many pieces are included in the package?

Answer: The package includes 4 pieces, which cover the front and rear doors on both the left and right sides.

Question: Is this part easy to install?

Answer: Yes, it is a direct replacement part designed for easy installation. You can typically remove the old seal and press the new one into place.

Question: What is this weather strip made of?

Answer: It is made from a combination of durable rubber and plastic materials.

Question: Will this help reduce wind noise?

Answer: Yes, it is designed to reduce noise by providing a tight seal around the window, which helps minimize rattle and wind noise.

Key Features

• Finger Grip Handle — The finger grip handle gives a secure hold for controlling the set during flushing.
• Focused Water Column Spray — The water column spray type delivers a focused stream for flushing the system.
• Alloy Body and Nozzle — The body, nozzle and interface are made from alloy, which suits repeated use.
• JP, EU and US Connections — It is compatible with JP, EU and US standard A/C connections.

Product Specifications

• Material: Alloy
• Handle Type: Finger Grip
• Water Spray Type: Water Column
• Connection Standards: JP, EU, US
• Set Quantity: 1 set

What It Is / How It Works

This A/C system flush set is a canister-style kit for cleaning automotive air conditioning systems. It helps remove contaminants and debris from the system, which supports cooling efficiency and airflow.

Who It's For / Use Cases

Car owners who want to flush their own A/C system at home will find a canister-style flush set useful for routine maintenance. Mechanics and garage owners who service one or several vehicles may use a flush set in a workshop. Anyone whose air conditioning has lost cooling power or developed odors may consider a flush before turning to more costly repairs.

How to Use / Care

1. Hold the set by its finger grip handle and control it during flushing.
2. Use the set only on vehicles with JP, EU or US standard A/C connections.
3. Flush the system about every 2-3 years, or sooner if cooling drops or odors appear.
4. Buy a compatible A/C flush solvent separately, since cleaning solution is not included.

How to Choose

Start with the vehicle's A/C connection standard. This set is built for JP, EU and US standard connections, so confirm the car matches one of these before buying or using it. Next, plan for cleaning solution, since it is not included and a compatible A/C flush solvent must be bought separately. Choose a set whose handle you can hold comfortably, because the finger grip handle is what you use to control the flush.

Frequently Asked Questions

Can I use this cleaning canister on any car?
It is designed to work with vehicles that have JP, EU or US standard A/C connections. Check that the car matches one of these standards before use.

Does this set come with cleaning solution?
No. It does not include cleaning solution, so a compatible A/C flush solvent must be bought separately.

Is the tool easy to use for a beginner?
It is straightforward to operate. The finger grip handle makes it easy to hold and control during use.

What is the body of the canister made from?
The body, nozzle and interface are all made from alloy material.

How often should I flush my A/C system?
It is generally recommended to flush the system every 2-3 years, or sooner if you notice reduced cooling performance or odors.