Keep your Tesla Model Y Juniper or Model Y L camera lenses clear and protected in all weather. This rain shade cover is designed to prevent water droplets, dirt, and debris from blocking your view, helping you maintain a safer driving experience.

Built for the 2025-2026 Tesla Model Y Juniper and Model Y L, this car camera rain cover offers a simple snap-on installation. It gives your vehicle's exterior cameras a dedicated shield against rain, snow, and road grime without interfering with the camera's field of view.

The cover is made from waterproof materials that you can easily wipe clean. It also adds a layer of anti-collision protection, helping to guard the camera lens from minor bumps and scratches during everyday use or car washes.

Whether you are parking in a busy lot or driving through a downpour, this juniper guard helps ensure your camera feed stays clear. It is a practical upgrade for Tesla owners who want to keep their vehicle's exterior products performing at their best.

Key Features and Benefits

- Waterproof design that keeps rain and moisture away from the camera lens for a clearer view in wet conditions.

• HD clarity material that does not distort the camera image, so you can rely on your parking and driving aids.

• Anti-collision protection that helps shield the camera housing from minor impacts and scratches.

• Easy to install with no tools required, making it a quick DIY upgrade for your Tesla.

• Wipeable surface that lets you clean off mud, salt, or bugs in seconds without damaging the cover.

Who Is This For

- Tesla Model Y Juniper owners (2025-2026 model year) who want to protect their front and rear cameras from the elements.

• Tesla Model Y L owners (2025-2026) looking for a dedicated rain shade for their vehicle's exterior cameras.

• Drivers who park outdoors or in areas with frequent rain, snow, or dust and want to reduce camera cleaning.

• EV enthusiasts who prefer a simple, no-drill accessory that adds practical protection to their car.

Usage Scenario

Sarah drives her 2025 Tesla Model Y Juniper through a heavy rainstorm on her evening commute. Without the rain cover, water streaks across the rear camera, making the backup display blurry. With the YZ camera lens cover, the water beads off and the camera stays clear. She arrives home and wipes the cover clean with a cloth in seconds, ready for the next drive.

Micro Comparison

Unlike generic camera covers that may block part of the lens or trap moisture, this rain shade is custom-fit for the Tesla Model Y Juniper and Model Y L. It uses a waterproof, anti-collision material that keeps the lens visible and protected. The wipeable surface also makes it easier to maintain compared to fabric or foam alternatives that absorb water and dirt.

Specifications

- Applicable Vehicle Model: For Tesla Model Y Juniper 2025-2026, For Tesla Model Y L 2025-2026

• Features: Waterproof, HD, Anti Collision, Wipeable, Easy To Install

• Product Name: YZ For Tesla 2026 Vehicle Camera Lens Rain Cover

• Usage: Automotive Exterior Products

Package Includes

- Front And Rear Camera Rain Cover

Why You Will Love It

You want your Tesla's cameras to work when you need them most, rain or shine. This cover gives you peace of mind that your view will stay clear without constant wiping. It is a small, affordable upgrade that makes a big difference in daily driving confidence.

Questions and Answers

Question: Will this fit my 2025 Tesla Model Y Juniper?

Answer: Yes, this rain cover is designed specifically for the Tesla Model Y Juniper 2025-2026 and Model Y L 2025-2026.

Question: Does the cover affect the camera image quality?

Answer: No, the cover uses HD clear material that does not distort or blur the camera view.

Question: How do I install the camera lens cover?

Answer: It simply snaps on over the existing camera housing. No tools or adhesive are required.

Question: Can I clean the cover if it gets dirty?

Answer: Yes, the surface is wipeable. You can clean it with a soft cloth and water or mild cleaner.

Question: Does this cover protect the camera from scratches?

Answer: Yes, it adds an anti-collision layer that helps shield the camera lens from minor bumps and scratches.

Key Features

• Adjustable Viewing Angle — The viewing angle can be adjusted so you can see the rear wheel clearly.
• Wide-Angle Convex Lens — The convex design gives a wider field of vision and helps remove blind spots.
• Strong Adhesive Mounting — It can be installed either below or above the rear view mirror, using strong adhesive stickers.

Product Specifications

• Weight: 50g (1.76 oz) (single piece)
• Product packaging: 1 piece

What It Is / How It Works

This auxiliary rear view mirror is a convex car mirror that attaches below or above the vehicle's existing rear view mirror. Its wide-angle convex surface gives a wider view of the area beside and behind the car.

How to Use / Care

1. Confirm the position of the rear view mirror on the vehicle and wipe the surface clean.
2. Tear off the double-sided adhesive protective layer on the bottom bracket and stick the product to the cleaned mirror surface.
3. Insert one end of the provided insert onto the product, then tear off the adhesive layer on the other end and stick it to the desired installation area.
4. After adjusting the angle, the mirror can be used.

Frequently Asked Questions

Where can it be installed?
It can be installed either below or above the rear view mirror, using the adhesive stickers.

How much does it weigh?
Each piece weighs 50g (1.76 oz).

Is it a wide-angle mirror?
It has a wide-angle convex design that gives a wider field of vision and helps remove blind spots.

Key Features

• Scratch Protection — It protects the door handle bowl from scratches, and it can also be used to decorate the car.
• Bendable Fit — The film can be bent to match the camber angle of the door handle bowl.
• Transparent Film — The film is transparent, so the handle's own color shows through.

Product Specifications

• Material: PVC
• Color: Transparent
• Piece Count: 5 pcs
• Placement: Door Bowl
• Packaging: No retail box; packed safely in a bubble bag

What It Is / How It Works

This clear car door handle protector is a thin PVC vinyl film sold in a pack of 5 pieces. It is cut to cover the door handle bowl, where keys and fingernails tend to scratch the paint.

Who It's For / Use Cases

Car door handle protectors suit drivers who want to guard the paint around the handle bowl on a car, SUV or van. They also suit owners who park in busy lots, where keys and bags often brush against the door handles.

How to Use / Care

1. Simply install with double-sided tape on the door handle bowl.
2. When you remove the adhesive, it will not leave any marks on the paint.

How to Choose

Choose a protector that matches the shape of your handle bowl, since the film can be bent to the bowl's camber angle. Check that the pack count of 5 pieces covers the handles you want to protect. A clear film suits owners who want the handle's original color to show through.

Frequently Asked Questions

What is the protector made of?
It is made of PVC, a clear vinyl film.

How many pieces are in the pack?
The pack has 5 pieces, and they are packed safely in a bubble bag with no retail box.

Which vehicles is it suitable for?
It is suitable for all cars, vehicles, suitcases, SUVs and vans.

Will it leave marks when removed?
When you remove the adhesive, it will not leave any marks.

Can the film be shaped to the handle?
It can be bent to adapt to the camber angle of the door handle bowl.

Key Features

• Replica Crystal Material — The ball is made of replica crystal.
• 3.5 cm Crystal Ball — The sphere measures 3.5 cm (1.38 in) across.
• 45 cm Chain — The pendant hangs on a 45 cm (17.7 in) chain.
• 37 g Weight — The pendant weighs 37 g (1.3 oz).

Product Specifications

• Material: Replica Crystal
• Item weight: 37 g (1.3 oz)
• Ball diameter: 3.5 cm (1.38 in)
• Chain size: 45 cm (17.7 in)
• Net weight: approximately 32g (1.13 oz)

What It Is / How It Works

Car rearview mirror pendants are decorative ornaments that hang from the mirror. This one is a crystal ball pendant with a replica crystal ball and a 3.5 cm (1.38 in) sphere.

How to Use / Care

1. Use it to decorate the rearview mirror of a car by hanging the pendant from the mirror.

Frequently Asked Questions

What is the ball made of?
The ball is made of replica crystal.

How big is the ball?
The sphere is 3.5 cm (1.38 in) in diameter.

How much does it weigh?
It weighs 37 g (1.3 oz).

Key Features

• Adhesive Tape Backing — The back of the cover has adhesive tape attached to it.
• Two-Piece Pack — The pack contains 2 pieces, sold as a pair.
• Exterior Styling Accessory — It is meant to give the car's hood a distinctive, styled look.

Product Specifications

• Piece Count: 2 pcs
• Color: Carbon Fiber, Gloss Black
• Vehicle Fit: Universal fit for most kinds of cars
• Attachment: Adhesive tape on the back
• Compatible models: Easy Install

What It Is / How It Works

This car hood scoop vent cover is an exterior styling accessory for a car's hood.

Who It's For / Use Cases

Car hood vent covers suit owners who want a styling accent on the hood and prefer a part that attaches with adhesive tape rather than hardware.

How to Use / Care

1. Use it to add an exterior styling accent to the hood of a car.

How to Choose

Pick the finish first: Carbon Fiber or Gloss Black. The cover comes in Carbon Fiber or Gloss Black.

Frequently Asked Questions

How many pieces are in the pack?
The pack contains 2 pieces, sold as a pair.

How is the cover attached?
It has adhesive tape attached to the back, so it is applied with that tape.

What colors are available?
It comes in Carbon Fiber and Gloss Black.

Key Features

• Left and Right Pair — The pack includes two covers, one for the left side mirror and one for the right.
• Glossy Black Finish — The cover has a glossy black finish with a carbon fiber look.

Product Specifications

• Piece Count: 2 pcs
• Compatible models: SEAT Leon Mk3 5F (ST / FR / Cupra) 2012-2020; SEAT Ibiza Mk5 2017-2020; SEAT Arona KJ7 2017-2020

What It Is / How It Works

Rear view mirror covers are add-on caps that sit over the outside of a car's side mirror housing.

This set contains 2pcs, a left and right rear view mirror cover for SEAT Leon Mk3 5F, Ibiza Mk5 and Arona KJ7 models.

Who It's For / Use Cases

This set suits owners of the SEAT Leon Mk3 5F, Ibiza Mk5 and Arona KJ7 who want a glossy black mirror cover with a carbon fiber look on both side mirrors.

How to Use / Care

1. Use it as a rear view mirror cover cap on the side mirror of a compatible SEAT model.

How to Choose

Start with the model list in Product Specifications under Compatible models and match your SEAT Leon, Ibiza or Arona to its model years. The set has two pieces, so one cover goes on each side mirror. Confirm the make and model before you order.

Frequently Asked Questions

How many pieces are in the pack?
The pack has 2 pcs, a left cover and a right cover for the two side mirrors.

Which SEAT models does it fit?
It fits the SEAT Leon Mk3 5F (ST / FR / Cupra) 2012-2020, the SEAT Ibiza Mk5 2017-2020 and the SEAT Arona KJ7 2017-2020.

What finish does the cover have?
The cover has a glossy black finish with a carbon fiber look.

Who makes this cover?
The brand is phirikes.

Does it carry a certification?
It carries CCC certification.

Key Features

• Daytime Visibility — Yellow and black warning strips stand out during the day and can help drivers notice the edge of the bumper.
• EVA Foam Cushioning — The bumper is made of EVA foam. It is thick enough to absorb impacts and guard car doors and garage walls against scratches and bumps.
• Self-Adhesive Backing — The back has a self-adhesive film, so the bumper sticks directly to the surface.
• Garage Wall Guarding — It can guard garage columns, walls and corners in small or large commercial garages and indoor or outdoor car parks.

Product Specifications

• Color: Yellow and Black
• Material: EVA foam
• Quantity: 1, 2, 4 or 8 pcs

What It Is / How It Works

This car door protector is a yellow and black foam edge bumper for car doors and garage walls. It is made of EVA foam.

Who It's For / Use Cases

Car door edge protectors suit drivers who park in tight garages, where a door can scrape a wall or pillar. Property managers and fleet operators who keep several bays protected may find a multi-piece pack useful.

How to Use / Care

1. Peel the self-adhesive protective film off the back of the bumper.
2. Stick the bumper to the car door edge or garage surface you want to protect.

How to Choose

Choose the pack count to match how many edges need guarding, from 1 piece for a single spot up to 8 pieces for several doors or walls. The finish is yellow and black.

Frequently Asked Questions

What colors are available?
It is yellow and black.

How many pieces come in one order?
Options are 1, 2, 4 or 8 pieces. Pick the count that matches the number of edges you need to guard.

What is the bumper made of?
It is made of EVA foam, which is thick enough to absorb impacts.

How is it attached?
The back has a self-adhesive protective film. Peel it off and stick the bumper onto the surface you want to protect.

Where can it be used?
It can guard garage columns, walls and corners in indoor and outdoor car parks and commercial garages.

Key Features

• Aluminum Alloy Build — It is made of 6063 aluminum alloy.
• Double-Layer Design — It has a double-layer structure on long brackets.
• Matte Black Finish — The spray-coated surface is matte black.
• Adjustable Bracket Angle — You can adjust the bracket angle to change how the spoiler sits on the trunk.

Product Specifications

• Color: Matte Black
• Material: Aluminum Alloy 6063
• Dimensions: 53.1 in (1350 mm)
• Bracket Spacing: 25.6 in (650 mm)
• Compatible With: Sedans, Coupes

What It Is / How It Works

This GT wing is a rear car spoiler that mounts on the trunk lid to add a racing-style look to the back of a car.

Who It's For / Use Cases

Rear car spoilers of this type suit drivers who want a sporty, track-inspired look on a sedan or coupe. They also suit owners who want the rear of the car to match a racing style, and who are comfortable with drilling and bolting a part to the trunk lid.

How to Use / Care

1. Install it on a hatchback car with a flat trunk.

How to Choose

Start with the car body style. Rear spoilers of this type are sold for sedans and coupes, so match the car to those body types before buying. A double-layer design suits buyers who want a sporty or racing look.

Frequently Asked Questions

What is the spoiler made of?
It is made of 6063 aluminum alloy, and the surface has a corrosion-resistant coating.

Which cars is it made for?
It fits most sedans and coupes. Drilling is required before the bolts are secured, and the trunk can still open.

Can the angle be changed?
The bracket angle can be adjusted to change how the spoiler sits on the car.

How long is the spoiler?
It measures 53.1 in (1350 mm) long, with the two brackets 25.6 in (650 mm) apart.

Key Features

• Soft PVC Chrome Finish — The strip is made of soft PVC with a polished chrome finish.
• Cut to Length — It can be cut into the length you need.
• Non-Flexible Trim — It is not flexible and cannot be bent.

Product Specifications

• Material: Soft PVC with chrome polished finish
• Color: Silver Chrome
• Suggested areas: Front grille, headlights, mirror, tail lights, hood pillar, fender trim, wheel cap trim

What It Is / How It Works

This chrome car exterior body strip is a soft PVC moulding trim for vehicle exteriors, with a polished chrome finish.

Body moulding strips are decorative trim pieces that edge the outside of a car and add a bright metallic accent to the bodywork.

Who It's For / Use Cases

Car owners who want a chrome accent on the outside of their vehicle often choose body moulding strips. They suit people who are trimming the front grille, headlight edges, mirror areas, fender trim or wheel cap trim and want a metallic look that can be cut to fit.

How to Use / Care

1. Cut the strip to the length you need.
2. Do not bend the strip, since it is not flexible.
3. Fit it to the areas you want to trim, such as the front grille, headlights, mirror, tail lights, hood pillar, fender trim or wheel cap trim.
4. Do not wash the car for 3 days after installation.

How to Choose

Measure the area first, since the strip cannot be bent.

Frequently Asked Questions

Can the strip be bent around curves?
No. It is not flexible and cannot be bent, so measure the run before you cut.

Can it be cut to length?
It can be cut into the length you need.

What is the strip made of?
It is made of soft PVC with a polished chrome finish.

Does it carry any certification?
It carries CCC certification.

Key Features

• Trim and Panel Fastening — It fastens trim and panels such as the bumper and fender.
• Polyoxymethylene Nylon Body — It is made of polyoxymethylene nylon, a plastic.
• Lightweight Vibration Absorption — It is lightweight, and it is made of plastic.
• Snug Hole Fit — It fits holes measuring 7.5-8mm (0.3–0.31 in).
• Tool Removal — It can be pulled out with tools, or cut when removal is needed.

Product Specifications

• Piece count: 50 pcs
• Top head diameter: 14.2 mm (0.56 in)
• Stem length: 15.2 mm (0.6 in)
• Material: Polyoxymethylene nylon (plastic)
• Fits hole size: 7.5-8mm (0.3–0.31 in)

What It Is / How It Works

These are car trim fastener clips, plastic push-pin style fasteners that fasten trim and panels in place.

It is suitable for many car makes, including Mercedes-Benz, BMW, GM, GMC, Ford, Chrysler, Toyota, Lexus, Honda, Acura, Dodge, Jeep, Nissan, Infiniti, Mazda and Subaru.

Who It's For / Use Cases

Trim fastener clips are for fastening trim and panels such as bumper, fender, door panel, grille or side skirt pieces on a car.

How to Use / Care

1. Use the clips to fasten trim and panels such as the bumper and fender.
2. Install them with tools, and pull them out or cut them when removal is needed.
3. Use them on radiator yoke, trim panel, door trim panel, car fender, side skirt, grille, engine cover, mud flap and splash guard shield retainers.

How to Choose

Start with the hole in your panel, since these clips fit holes measuring 7.5-8mm (0.3–0.31 in).

Frequently Asked Questions

How many clips come in a pack?
The pack holds 50 pieces. Each clip has a 14.2 mm (0.56 in) head diameter and a 15.2 mm (0.6 in) stem.

What are the clips made of?
They are made of polyoxymethylene nylon, a plastic, and the body is lightweight.

Can the clips be removed?
They can be pulled out with tools, or cut if you need to take them out.

Do they fit cars from specific makes?
They are suitable for many car makes, including Mercedes-Benz, BMW, Ford, Toyota and Honda, among others.

Key Features

• Stainless Steel Tip — The tip is made of stainless steel to help protect the original car exhaust pipe.
• Double Bolt Fastening — Two bolts secure the tip, so it stays firmly on the exhaust.
• Double Outlet Design — The double outlet has coordinated exhaust ports for a more convenient exhaust flow.
• Finished Edge — The edge is finished to help protect your hand and paint.

Product Specifications

• Material: Stainless Steel
• Color: Black chrome, burnt blue, neon chrome
• Piece Count: 1 pcs
• Size: 2.5"
• Inlet Diameter: 63mm (2.5 in)
• Mounting Position: Rear

What It Is / How It Works

This is a chrome-finished car exhaust tail pipe trim, a stainless steel muffler tip for the rear of the exhaust system. It is sold as one piece with a 2.5-inch size and a 63mm (2.5 in) inlet diameter.

Who It's For / Use Cases

Car exhaust tail pipe trims suit drivers who want to update the look at the back of their vehicle. They are often chosen by owners who already have a stock exhaust outlet and want a chrome or colored finish. Buyers who prefer a bent or straight outline can compare the finishes offered and pick the one that matches their car's style.

How to Use / Care

1. Use it as a car exhaust tail pipe trim at the rear of the vehicle.
2. Fasten it with both bolts so the tip sits securely on the exhaust.
3. Have a professional handle the welding and cutting that installation requires.

How to Choose

Start by confirming the original tailpipe size, because the inlet diameter is 63mm (2.5 inch). Because installation involves welding and cutting, plan for a professional installer before you order.

Frequently Asked Questions

What is it made of?
It is made of stainless steel.

How many pieces are in a pack?
One piece per pack.

Which finishes are available?
It comes in black chrome, burnt blue and neon chrome, in bent or straight styles.

Key Features

• Adjustable Size Range — It comes in lengths from 117-127cm (46.1–50 in), so you can select the size that suits your trunk.
• Three-Piece Set — The set has 3 pcs.
• Double-Sided Tape Mounting — It mounts with double-sided tape and needs no modification to the existing body.

Product Specifications

• Material: ABS plastic
• Color: All glossy black
• Piece Count: 3 pcs
• Size range: 117-127cm (46.1–50 in)
• Placement on Vehicle: Rear Trunk

What It Is / How It Works

This rear trunk spoiler is sold as a 3-piece set and is placed on the rear trunk.

How to Use / Care

1. Use the double-sided tape to fix the spoiler to the rear trunk.
2. Professional installation is highly recommended, because instructions are not included.

How to Choose

Choose the size from the 117-127cm (46.1–50 in) range that matches your trunk lid. It fits most sedans, but it is not made for SUV models or for models with large tilting and bends in the middle of the rear boot, so check your trunk shape before buying.

Frequently Asked Questions

What is the spoiler made of?
It is made of ABS plastic and comes in all glossy black.

Does it fit SUVs?
It is not made for SUV models. It fits most sedans, but not models with large tilting or bends in the middle of the rear boot.

Is installation included?
Instructions are not included, and professional installation is highly recommended.

How many pieces are in the set?
The set has 3 pcs.

Key Features

• Anti-Fog Coating — It has an anti-fog coating and edge drainage grooves that reduce condensation for a clearer rear camera view.
• Weather-Resistant Material — It is made of long-lasting weather-resistant material.
• Rain and Fog Protection — It shields the rear camera from rain and fog, helping keep the view clear.
• Tool-Free Installation — It installs in minutes with no tools, using a three-step process.
• General Vehicle Fit — Its design is a general fit for most car models, with curved surfaces that adapt to different mounting positions.

Product Specifications

• Color: Black, White
• Quantity: 1 piece
• Fit: General fit for most car models

What It Is / How It Works

This car rear camera rain cover is a protector for the vehicle's rear camera. It is designed to shield the lens from rain, fog and winter weather while you park or drive.

Who It's For / Use Cases

Rear camera rain covers suit drivers who park outdoors or drive in rainy, foggy or winter weather and want the reversing camera kept clear.

How to Use / Care

1. Use it to protect the rear camera from rain and fog.

How to Choose

Choose the color that suits your vehicle, black or white. Confirm the cover is a general fit for your car model before buying, since the design is made for most car models. Look for a cover that is made of weather-resistant material if you park outdoors often.

Frequently Asked Questions

What is it made of?
It is made of long-lasting weather-resistant material.

Which colors does it come in?
It comes in black or white.

Does it block the camera lens?
It is designed not to block the lens, and its curved surfaces adapt to different mounting positions.

How is it installed?
It installs in minutes with no tools, using a three-step process.

Does it fit most cars?
It is designed as a general fit for most car models.

Key Features

• TPVC Material — It is made of TPVC, which is flexible and bendable.
• Lightweight Strip — It is ultra light in weight.
• 3M Adhesive Backing — It is attached with 3M adhesive.
• Edge Scrape Guard — It helps protect the edge from scrapes from driveways, speed bumps and curbs.

Product Specifications

• Material: TPVC
• Color: Black
• Item Width: 60 mm (2.36 in)
• Item thickness: 0.5 cm (0.2 in)
• Item Length: 250 cm (98.4 in)
• Auto Part Position: Front

What It Is / How It Works

This car lip skirt protector is a strip for the lower edge of a bumper or side skirt. It is 250 cm (98.4 in) long and 60 mm (2.36 in) wide, and it is made of TPVC.

Who It's For / Use Cases

Lip skirt protectors suit drivers who want a guard along the lower bumper or side skirt edge, where driveways, speed bumps and curbs can scrape it. It suits most cars, trucks and SUVs.

How to Use / Care

1. Stick it on the front or rear bumper, body kit, side skirt or tail fins.
2. Install it from the middle, and remove the protective film from the adhesive carefully.
3. Cut a few small triangles in the adhesive tape for turns.

How to Choose

Measure the lower edge you want to cover before you buy. This strip is 250 cm (98.4 in) long and 60 mm (2.36 in) wide, so it covers a long run of bumper or side skirt edge. It is for the front position, and it can also be stuck on a rear bumper or side skirt.

Frequently Asked Questions

Does it carry a certification mark?
It carries a CE certification mark.

What is it made of?
It is made of TPVC, which is flexible and bendable.

How long and wide is the strip?
It is 250 cm (98.4 in) long, 60 mm (2.36 in) wide and 0.5 cm (0.2 in) thick.

Is it light?
It is ultra light in weight.

What color is it?
It is black.

Key Features

• Body Impact Protection — It is designed to provide body impact protection along the door.
• Anti-Collision Strip — It is an anti-collision strip for car doors.

Product Specifications

• Material: PVC

What It Is / How It Works

This car door anti-collision strip is a PVC strip for vehicle doors. It is designed to provide body impact protection along the door.

Frequently Asked Questions

What material is it made of?
It is made of PVC.

What does it protect against?
It is made to provide body impact protection for the car.

Is it designed for all car models?
It is designed to fit any car model and all vehicle doors.

Key Features

• No-Drill Installation — It is designed for installation without drilling.

Product Specifications

• Material: ABS
• Style: Shark fin
• Size: 7 × 7 × 16.5 cm (2.76 × 2.76 × 6.5 in)
• Weight: 76 g (2.7 oz)

What It Is / How It Works

This is a replacement shark fin antenna for a car. It is meant to enhance the radio signal and add a decorative touch to the vehicle's exterior.

How to Use / Care

1. Use it to replace the antenna on your car with a shark fin antenna.

Frequently Asked Questions

What is this antenna for?
It is a replacement antenna for your car. It can enhance the radio signal and adds a decorative look to the vehicle.

What is it made of?
It is made of ABS.

Does it need drilling?
It is designed for installation without drilling.

Does it include a cable?
It includes an FM/AM connection cable.

How big is it and how much does it weigh?
It measures 7 × 7 × 16.5 cm (2.76 × 2.76 × 6.5 in) and weighs 76 g (2.7 oz).

Key Features

• Foam Cushioning — It is made of EVA foam, which is thick enough to absorb impacts and protect car doors and garage walls from scratches and bumps.
• Reflective Warning Colors — Yellow and black or red and white warning strips are eye-catching in daylight, so drivers notice the guard.
• Self-Adhesive Backing — The back has a self-adhesive protective film, so the guard sticks to the surface you choose once the film is peeled off.
• Wall and Column Guarding — It guards garage columns, walls and corners, and suits small and large commercial garages and indoor or outdoor car parks.

Product Specifications

• Piece Count: 4 pcs
• Material: EVA foam
• Color: Yellow and Black, Red and White

What It Is / How It Works

These foam bumper guards are self-adhesive car door protectors made of EVA foam. Each guard is a soft, thick strip that sits on a wall, column or corner so a swinging car door meets foam rather than the surface.

How to Use / Care

1. Peel the self-adhesive protective film off the back of the guard.
2. Stick the guard to the garage wall, column or car door surface you want to protect.

How to Choose

Start with the color that suits your garage: yellow and black or red and white.

Frequently Asked Questions

What is the guard made of?
It is made of EVA foam. The foam is thick enough to absorb impacts and protect car doors and garage walls from scratches and bumps.

How many pieces come in the pack?
One order gives you four guards, since the pack has 4 pcs.

How is it attached?
The back is self-adhesive. Peel off the protective film and stick the guard to the surface you want to protect.

What colors are available?
It comes in yellow and black or red and white.

What does it protect?
It is made to protect car doors and garage walls against scratches and bumps, and it guards garage columns, walls and corners.

Key Features

• Tough Rubber Build — It is made of rubber and is not easy to deform.
• Impact Absorption — It absorbs impact and reduces the external force that reaches the door edge.

Product Specifications

• Piece Count: 4 pcs
• Material: Rubber

What It Is / How It Works

This car door protector guard strip is a rubber edge guard for car doors. The pack contains 4 pieces, and the goods are affixed to the front or rear of the car.

Who It's For / Use Cases

Car door edge guards are rubber strips for car doors. They can be affixed to the front or rear of the car.

How to Use / Care

1. Clean and dry the panel where you want to install.
2. Tear the cover off the double-sided tape on the back side.
3. If the temperature is low, warm the product before you install it.
4. Stick it on the area where you want to install.

How to Choose

Start by counting the door edges and spots you plan to cover, then compare that with the 4-piece pack.

Frequently Asked Questions

How many pieces are in a pack?
The pack contains 4 pieces.

What is the guard made of?
It is made of rubber, and the rubber is tough and not easy to deform.

How do I attach it to the door?
Tear the cover off the double-sided tape on the back side, then stick it onto a clean, dry panel where you want it.

What if it is cold when I install it?
If the temperature is low, the product needs to be warmed before you install it.

How does it help with impacts?
It absorbs impact and reduces the external force that reaches the door edge, and it can effectively prevent scratches caused by accidents.

Key Features

• Carbon Fiber Build — It is made of carbon fiber with strong wear resistance.
• Handle Scratch Guard — Protective films for door handles guard the handle from scratches.
• Paint Around Handle — It helps keep the paint around the handle away from scratches.
• Daily Door Use — Door handle films are meant to stay intact as the door opens and closes, without causing small scratches to the handle.

Product Specifications

• Piece Count: 4 pieces
• Item Height: 8.5 cm (3.35 in)
• Item Width: 6.8 cm (2.7 in)

What It Is / How It Works

This car door handle protective film comes as a set of 4 pieces. The item measures 8.5 cm (3.35 in) high and 6.8 cm (2.7 in) wide.

Door handle protective films are thin protective sheets placed over the handle area to limit scratches from everyday contact.

Who It's For / Use Cases

Door handle protective films suit car owners who want to limit scratches on the handle area, especially on vehicles that are opened and closed many times a day. They fit owners who prefer a simple, low-profile way to protect the paint around the handle.

How to Use / Care

1. Use it to help protect car door handles from scratches.

How to Choose

Start by checking the handle outline against the piece size, 8.5 cm (3.35 in) by 6.8 cm (2.7 in), so the film covers the area you want to protect. The set includes 4 pieces, so check how many handle areas you plan to cover before you buy.

Frequently Asked Questions

How many pieces come in a pack?
It comes as a set of 4 pieces.

What size is each piece?
The item measures 8.5 cm (3.35 in) high and 6.8 cm (2.7 in) wide.

Does it help keep scratches off the handle?
Protective films for door handles guard the handle from scratches, and they are meant to keep the paint around the handle free of scratches as the door opens and closes.

Where should it be placed?
It sticks onto a clean, dry surface, not over wax or oil.

Key Features

• Rubber Construction — It is made of rubber that is wear-resistant and impact-resistant.
• Engine Cover Seal — It is designed as an engine cover seal strip for the hood gap.
• Dust, Water and Snow — Installed on the hood, it can help prevent dust, water and snow from getting in.
• Cut-to-Fit Design — It can be cut freely to the length you need, and it is designed to fit the hood better.
• 4-Meter Length — It measures 4 meters in length.

Product Specifications

• Material: Rubber
• Dimensions: 4 meters

What It Is / How It Works

This car hood seal strip is a rubber strip made to close the gap around the engine cover. Seal strips of this kind run along the hood edge to block out weather and road debris.

Who It's For / Use Cases

Seal strips like this suit drivers who want to close the gap around a car hood against dust, water and snow, and who want a rubber strip they can trim to fit their own hood length.

How to Use / Care

1. Fit the strip on the hood, where it can help prevent dust, water and snow.
2. Cut the strip to the length you need, since it can be cut freely.

How to Choose

Choose a strip length that covers the hood gap you need to seal, since this strip is 4 meters long and can be cut down. Rubber suits drivers who want a wear-resistant seal. Check that the strip sits flush along the hood edge before you trim it.

Frequently Asked Questions

What is the strip made of?
It is made of rubber that is wear-resistant and impact-resistant.

How long is it?
It measures 4 meters in length and can be cut freely to the length you need.

What does it help keep out?
Installed on the hood, it can help prevent dust, water and snow from getting in.

Is it certified?
It carries CCC certification.

Key Features

• ABS Construction — It is made of ABS, a lightweight plastic that keeps each cap light to carry.
• Corrosion and Waterproof — The caps are corrosion and waterproof, so they stay usable on wheels in wet weather.
• Decorative Wheel Accent — They are made for decoration and to decorate your wheels.
• Screw-On Fitting — It is installed by simply screwing it on.

Product Specifications

• Material: ABS
• Color: Fluorescent pink, green, blue
• Size: About 1.6cm *1.2cm
• Inner diameter: 0.8cm
• Function: Protector, Decoration

What It Is / How It Works

Luminous valve caps are small caps that go over the valve stem on car, motorcycle and bicycle wheels.

The caps come in fluorescent pink, green and blue.

Who It's For / Use Cases

Luminous valve caps suit car, motorcycle and bicycle owners who want a small decorative accent on their wheels. Riders who like bright colour at night may find them a simple way to personalise a bike or car.

How to Use / Care

1. Use the caps to decorate car, motorcycle or bicycle wheels.

How to Choose

Pick the colour that suits your wheels: the caps come in fluorescent pink, green and blue. Compare the size before you buy: each cap is about 1.6cm by 1.2cm with a 0.8cm inner diameter, so check it against your valve stem.

Frequently Asked Questions

What material are the caps made of?
They are made of ABS, a lightweight plastic.

Are the caps waterproof?
They are corrosion and waterproof, so they suit wheels that face rain and damp roads.

What size are the caps?
Each cap measures about 1.6cm by 1.2cm with a 0.8cm inner diameter.

Which colours are available?
The caps come in fluorescent pink, green and blue.

How do the caps fit on the wheel?
They are installed by simply screwing each one on.

Key Features

• PVC Material — The ornament is made of PVC, a plastic material.
• Stated Dimension — It has a dimension of 23.

Product Specifications

• Material: PVC
• Dimensions: 23

What It Is / How It Works

This car roof ornament is a decorative accessory for the exterior of a vehicle. Car roof ornaments are added to the roof area of a car to give it a playful, personal look. The body is made of PVC.

Who It's For / Use Cases

Car roof ornaments suit drivers who want a playful, decorative look on the outside of their vehicle. Owners who like to personalize a car for road trips, car shows or everyday driving can use this kind of decoration to stand out on the road.

How to Use / Care

1. Use it to decorate the roof of a car.

How to Choose

Start with size: the stated dimension is 23, so compare that figure with the roof area you want to decorate. Next, check the material, which is PVC, a plastic commonly used for decorative accessories.

Frequently Asked Questions

What is the ornament made of?
It is made of PVC.

What is its stated dimension?
It has a dimension of 23.

What is it for?
It is for decorating the roof of a car. It works as a decorative accessory for the exterior of a vehicle.

Does it suit every type of car?
Car roof ornaments are generally placed on the roof area of a car, so choose one whose size matches the roof space you have in mind before you buy.

Key Features

• Reflective Visibility — Reflection helps rear drivers notice your vehicle at night, in rain and fog, and reminds them to keep enough distance when you stop at the roadside.
• Four-Piece Set — The set contains 4PCS, so you get four pieces in each pack.
• PET Reflective Film — The reflective film is made of PET material and is noted for its high brightness.
• Waterproof Anti-Scratch Finish — It is waterproof and anti-scratch, with good adhesive that helps it stay in place for a long time.
• Five Color Options — It comes in blue, white, green, red and orange.

Product Specifications

• Piece Count: 4PCS
• Material: PET material
• Craft: Reflective film
• Color: Blue, White, Green, Red, Orange

What It Is / How It Works

This reflective car door warning sticker is a set of four reflector tape decals made of PET reflective film. It is made for use on car doors as an opening warning reflector.

Who It's For / Use Cases

Reflective warning stickers of this kind suit drivers who want a door edge to stand out when it swings open near traffic. They are also a practical choice for owners of motorcycles and bicycles who want a visible marker on their vehicle.

How to Use / Care

1. Decide where you want to place the stickers before sticking.
2. Peel the protective film off at its back and stick.

How to Choose

Start with placement, since these stickers are meant for a car door and you should decide where each piece will sit before sticking. Next, pick a color from blue, white, green, red or orange that stands out against your vehicle's paint. Finally, consider the vehicle type, because the set is suited to cars, SUVs, motorcycles and bicycles.

Frequently Asked Questions

How many pieces come in a pack?
The pack is 4PCS, so you get four pieces in each set.

What colors are available?
The color options are blue, white, green, red and orange, so you can match your vehicle or choose a contrasting shade.

Is the sticker waterproof?
It is waterproof and anti-scratch, with good adhesive that helps it stay on the surface for a long time.

Which vehicles is it suited to?
It is suited to cars, SUVs, motorcycles and bicycles of all sizes.

Key Features

• Rubber Construction — It is made of rubber, which is resistant to chemicals.
• Fuel System Protection — It helps keep the fuel system dry and free from dust.
• Leak Prevention — It seals the fuel tank cap to help prevent leaks and spills.
• Wide Vehicle Range — It is designed to fit a wide range of vehicles.

Product Specifications

• Material: Rubber
• Protection: Waterproof and dustproof

What It Is / How It Works

This sealing strip is a rubber seal for the fuel tank cap area of a car. It is designed to fit a wide range of vehicles and is made of rubber. Sealing strips of this kind are commonly used around caps and covers to block water and dust from getting into a sealed opening.

Who It's For / Use Cases

Car owners who want a simple rubber seal for the area around a fuel tank cap or charging port cover may find this type of strip useful.

How to Use / Care

1. Fit the sealing strip around the fuel tank cap by hand; no tools are needed.
2. Wipe dirt off the cap area before refitting the strip so it sits flat against the seal.

How to Choose

Start with the opening you need to seal, such as a fuel tank cap or a charging port cover, and pick a strip that matches that area. Rubber is a flexible material for seals of this kind, so check that rubber suits what you need. Confirm that the strip is designed for your vehicle type before you buy, and choose the option that matches the opening you want to protect from water and dust.

Frequently Asked Questions

What is it made of?
It is made of rubber, which is resistant to chemicals.

Is it waterproof and dustproof?
It is waterproof and dustproof, which helps keep the fuel system dry and free from dust.

Does it need tools to fit?
It can be fitted without tools or professional help.

What does it seal?
It seals the fuel tank cap to help prevent leaks and spills around the filler opening.

Key Features

• Noise and Water Blocking — It is meant to block out noise and water, for a quieter drive.
• Adhesive Backing — The strip has an adhesive backing that holds it to the door edge.
• Suits All Car Types — It is suitable for all types of cars and can go on any car door edge.
• 5-Meter Length — Each pack is 5 meters (196 inches) long, which can cover several cars or several applications on one car.

Product Specifications

• Length: 5 m (196 inches)
• Packaging: Individually packaged in OPP

What It Is / How It Works

This car door edge seal strip has an adhesive backing and is sold for the edges of car doors. Strips of this kind are made to help guard door edges against scratches and knocks when doors open near walls, posts or other cars.

Who It's For / Use Cases

Car owners who want a strip along the door edges to reduce scratches and bumps may find this type useful. It suits people who open doors in tight parking spaces, or who want the same strip for several cars or several spots on one car.

How to Use / Care

1. Stick the strip to the edge of a car door using its adhesive backing.
2. Use it on any car door edge, since it is suitable for all types of cars.
3. Use the 5-meter length across several cars or several applications on the same car.

How to Choose

Start by measuring the door edges you plan to cover, then compare them with the 5-meter length. If you plan to use the strip on more than one car, check that the length covers all of them. Pick the type that matches your need, whether that is blocking noise and water or guarding the edge against scratches.

Frequently Asked Questions

Does it block water and noise?
It is meant to block out noise and water, which can make the drive quieter.

How is the strip attached?
It has an adhesive backing that sticks it to the door edge.

How much strip is in a pack?
Each pack is 5 meters (196 inches) long.

Which cars does it suit?
It is suitable for all types of cars and can be used on any car door edge.

How is it packed?
Each strip comes individually packaged in OPP.

Key Features

• Rubber Construction — The seal is made of rubber.
• Door Handle Protection — It protects the car door handle.
• Easy Installation — It is easy to install, and you can do it yourself.
• Quick Removal — It can be removed from the panel quickly, and removing it does not damage the panel surface.
• Easy To Clean — It is easy to clean and quick to replace, and it keeps the panel clean and intact.

Product Specifications

• Material: Rubber
• Color: Black
• Installation location: Car door handle
• Pack count: 2 door handle rubber seals
• Fits models: BMW E36 3-Series (1992–1999), E34 5-Series (1988–1996), E32 7-Series (1986–1994), Z3 (1995–2002)

What It Is / How It Works

Door handle rubber seal exterior kits are accessories for the outside of a car door handle area. They cover the handle surround with rubber, which helps protect the panel around the handle from everyday wear.

Who It's For / Use Cases

Owners of older BMW models with double doors who want a rubber seal around the outer door handle area will find this type of kit useful. It also suits anyone who prefers a simple, black rubber accessory that can be fitted and removed without tools.

How to Use / Care

1. Use it to protect the car door handle.

How to Choose

Start by matching the series and years listed in Product Specifications to your car. Confirm that your car has double doors, because the kit is only suitable for double door models. Rubber is the material used, so a flexible, black seal is the expected finish for this type of accessory.

Frequently Asked Questions

Is it suitable for every BMW door?
It is only suitable for double door models, so check your car's door type before you order.

What is it made of?
It is made of rubber and is black in color.

How many pieces are in a pack?
The pack contains 2 door handle rubber seals.

Is it easy to install?
It is easy to install, and you can do it yourself.

Can it be removed later without damage?
It can be removed from the panel quickly, and removing it does not damage the panel surface.

Key Features

• Aluminum Alloy Build — It is made of T6061-T6 CNC aluminum alloy.
• Yamaha TMAX 530 Fit — It fits the Yamaha TMAX 530 SX and DX models from 2015 to 2019.
• Front Axle Cover — It is a front axle cover plate for the scooter's front axle area.

Product Specifications

• Material: T6061-T6 CNC aluminum alloy
• Finish: Anodized surface finish
• Color: Titanium, Gold, Silver, Red, Blue, Black
• Compatible models: Yamaha TMAX 530 SX/DX, 2015–2019
• Package: 1 x Front Axle Coper Plate

What It Is / How It Works

This front axle cover plate is a decorative accessory for the front axle area of a Yamaha TMAX 530 scooter. It is made of T6061-T6 CNC aluminum alloy and has an anodized surface finish. One plate is supplied per pack.

Who It's For / Use Cases

Front axle cover plates suit Yamaha TMAX 530 owners who want to dress up the front end of their scooter with a metal accent. Riders who like to personalize the look of their scooter in a colour that matches their bike will find this type of cover plate a practical choice for that purpose.

How to Use / Care

1. Use it to dress up the front axle area of a Yamaha TMAX 530 SX or DX scooter from 2015 to 2019.

How to Choose

Start with the scooter model and year, since this plate is made for the Yamaha TMAX 530 SX and DX from 2015 to 2019. When comparing this type of cover plate, aluminum alloy with an anodized surface finish is the material and surface to look for. One plate is included per pack, so confirm the quantity you need before you buy.

Frequently Asked Questions

Which scooter does this plate fit?
It fits the Yamaha TMAX 530 SX and DX models from 2015 to 2019. The Compatible models row in Product Specifications gives the same model and years.

What material is it made of?
It is made of T6061-T6 CNC aluminum alloy with an anodized surface finish.

Which colours are available?
It comes in Titanium, Gold, Silver, Red, Blue and Black.

How many plates come in a pack?
One Front Axle Coper Plate is included per pack.

Does it fit other Yamaha models?
The fitment covers the Yamaha TMAX 530 SX and DX from 2015 to 2019 only. Confirm your scooter's model and year against the Compatible models row before you order.

Key Features

• Shock Absorption — It absorbs impact when the car door closes.
• Noise Reduction — It reduces the loud slamming noise and vibration when the door shuts.
• Anti-Scratch Protection — It helps prevent scratches and wear on the door latch and the paint around it.
• Anti-Slip Fit — Its toothed or striped surface fits tightly and does not shift, even with frequent opening and closing.
• Safe Silicone Build — It is made of safe, flexible, high-elastic silicone that can be washed and reused.

Product Specifications

• Material: Safe Silicone
• Size: 3.5 × 1 × 1 cm (1.38 × 0.39 × 0.39 in)
• Color: Black, Red, Yellow
• Installation: No tools required

What It Is / How It Works

This silicone car door lock cover pad is a small cushion that sits on the door latch. It is 3.5 × 1 × 1 cm and is sized for most sedans, SUVs, trucks and vans.

Who It's For / Use Cases

Car door lock cover pads suit drivers who want to reduce the clack of a door closing and protect the latch and paint from repeated contact. They also suit anyone who wants a simple, tool-free accessory for a daily-use car.

How to Use / Care

1. Clean the surface of the car door latch.
2. Align the cushion with the latch.
3. Push horizontally until it is firmly fixed.
4. Finish installation in seconds, with no tools needed.

How to Choose

Compare the cover's dimensions in Product Specifications with the size of your door latch before ordering. Choose 1 pack for a single latch or 2 packs if you want to cover more than one door. Black, red and yellow are the colors available, so pick the one that suits your car's interior.

Frequently Asked Questions

What is the cover made of?
It is made of safe, flexible, high-elastic silicone.

Does it need tools to install?
No tools are needed. Align it with the latch and push horizontally until it is firmly fixed.

What size is it and which colors come in it?
It measures 3.5 × 1 × 1 cm (1.38 × 0.39 × 0.39 in) and comes in black, red and yellow.

How many pieces are in each option?
You can choose 1 pack with 4 pieces or 2 packs with 8 pieces.

Can it be cleaned and used again?
It is washable and reusable, so you can clean it and fit it back on the latch for long-term use.

Key Features

• Wear-Resistant Trim — The strip is wear-resistant and is sold as a decorative trim piece for the rear bumper area.
• Scratch Protection — It helps protect the trim from scratches.

Product Specifications

• Color: Black
• Dimensions: 90X8cm,104x9cm
• Vehicle Type: Cars
• Use: Rear bumper and trunk door sill trim
• Package Contents: 1 anti-scratch strip with double-sided adhesive

What It Is / How It Works

A rear bumper guard is a strip fitted along the rear bumper or trunk door sill of a car to add a decorative trim line and guard the edge against scuffs.

This bumper guard is an anti-scratch strip sold as one piece with double-sided adhesive.

Who It's For / Use Cases

Bumper guard strips suit car owners who want to protect the rear bumper or trunk door sill from scratches while adding a trim detail. They suit drivers who load and unload the trunk often and want the rear edge of the car kept clear of scuffs.

How to Use / Care

1. Start installing the strip from its center.
2. Carefully remove the protective film from the adhesive.

How to Choose

Start with size. The Dimensions row lists two sizes, 90X8cm and 104x9cm, so measure the rear bumper or trunk sill area you plan to cover and pick the length that fits. Black is the listed color, so choose it if you want a dark trim line. Make sure the mounting area is flat and clean before you apply the adhesive backing.

Frequently Asked Questions

What does the strip protect?
It helps protect the trim from scratches and is sold as a decorative piece for the rear bumper area.

What comes in the pack?
The pack has one anti-scratch strip with double-sided adhesive.

What sizes does it come in?
The listed dimensions are 90X8cm and 104x9cm, as shown in the Product Specifications.

What color is it?
It is black.

What vehicles is it for?
It is for cars and is used on the rear bumper and trunk door sill.

Key Features

• Rubber Sealing Strip — It is a rubber sealing strip for car doors, hoods and trunks.
• Sealing Role — It plays a sealing role that helps prevent the car hood from leaking.
• Noise Insulation — It has a strong sound insulation effect that helps reduce car noise.
• Resilient Rubber — The rubber has high resilience and does not age.

Product Specifications

• Material: Rubber
• Package: 1 piece per pack
• Back: Self-adhesive

What It Is / How It Works

This car rubber seal strip is a sealing strip made of rubber for vehicle body edges. One piece is supplied per pack.

Who It's For / Use Cases

Seal strips of this type suit car owners who want a flexible rubber edge seal for a door, hood or trunk gap. They suit a buyer who is replacing a worn edge seal or adding one where a panel meets the body, as long as the strip's profile matches the gap.

How to Use / Care

1. Use it to seal the edges of a car door, hood or trunk.

How to Choose

Start with the edge you need to seal. Measure the door, hood or trunk gap and confirm the strip's profile suits the groove it will sit in. Rubber is the material to look for when you want a flexible, resilient seal. Choose the strip for the panel type you are working on, and buy the length you need for that edge.

Frequently Asked Questions

What is it made of?
It is made of rubber.

How is it attached?
The back is self-adhesive.

How many come in a pack?
There is one piece per pack.

Does it help with noise?
It has a strong sound insulation effect that helps reduce car noise.

Does the rubber age?
The rubber has high resilience and does not age.