Key Features

• Plastic Construction — The clip is made of plastic and is designed for the rear dashboard air vent outlet.
• Direct Replacement — It is a direct replacement for the original part in the rear vent, so it swaps in for a worn or broken tab.
• Vehicle Fit — It fits VW Golf 7 and 7.5 models from 2013 to 2020.
• Repair Kit Format — It is sold as a repair kit for the rear dashboard AC vent outlet pick.

Product Specifications

• Material: Plastic
• Fits: VW Golf 7 7.5 2013-2020; VW Golf 7 7.5 MK7 MK7.5 GTI GTD GTE R-Line 2013–2019

What It Is / How It Works

This rear air conditioner vent tab clip is a plastic clip for the rear dashboard air outlet. Rear vent tabs hold the outlet housing in place, so a clip of this type is used to repair a worn or broken tab.

Who It's For / Use Cases

Owners of VW Golf 7 and 7.5 cars with a loose or broken rear dashboard vent tab may look at a clip like this. Repair shops and do-it-yourself owners who need to replace one small rear vent part often choose a targeted plastic clip rather than a full vent assembly.

How to Use / Care

1. Use it to replace a broken or missing tab clip on a rear air conditioner vent outlet.

How to Choose

Start with the vehicle. Confirm that your car is a VW Golf 7 or 7.5 from the model years in the Fits row of Product Specifications before ordering. Next, compare the clip shape with the broken tab, since rear vent tabs differ in form. A single clip suits one worn tab, while the repair kit format suits buyers who want spare parts on hand.

Frequently Asked Questions

Is it powered?
No. It is non-powered, so it is a plastic clip with no power connection to make.

Which vehicles does it fit?
It fits VW Golf 7 and 7.5 models from 2013 to 2020, as shown in the Fits row of Product Specifications.

What is it made of?
It is made of plastic. Check the model years and the shape of your original tab before ordering, since fit depends on the vehicle.

Is it a single clip or a kit?
It is sold as a repair kit for the rear dashboard AC vent outlet pick, so it is a kit format rather than a single loose part.

What It Is / How It Works

Rear air vent covers are small accessories that sit over a car's rear air vent grille. They are made for the back seat area of a vehicle, where the vent outlet is exposed when the car is in use.

Who It's For / Use Cases

Rear air vent covers suit drivers who carry passengers in the back seat and want the rear vent grille covered when it is not needed. They suit owners who prefer a simple, low-profile accessory that sits over an existing vent rather than replacing any part of the vehicle.

How to Use / Care

1. Keep the rear vent grille covered whenever the back seat outlet is not in use.

How to Choose

Choose a rear air vent cover by the vehicle model and trim it is made for, since vent grille shapes differ from one model to another. Compare the outline of the cover with the vent grille in your car before you buy, and pick the finish and color that suit your interior.

Frequently Asked Questions

What is a rear air vent cover for?
Rear air vent covers are made to sit over the back seat vent grille and keep the outlet covered when air is not needed there.

Will one cover fit every vehicle?
Rear air vent covers are sized to particular vent grilles, so a cover made for one vehicle model may not suit another.

What brand is it?
The brand is YZ.

Key Features

• Wear-Resistant Surface — The surface layer is sturdy and wear-resistant, with good toughness against daily friction and impact.
• Soft Buffer Padding — Built-in soft padding stops collision rattling when passengers kick or set hard items on the armrest.
• Low-Profile Design — Its classic low-profile color design blends with most car interior trims.

Product Specifications

• Surface: Wear-resistant surface layer with good toughness, resistant to daily friction and impact
• Protection: Blocks scratches, shoe scuffs, foot stains and mud marks
• Attachment: Built-in fasteners; no glue or drilling required
• Water and dust: Waterproof and dustproof design
• Design: Classic low-profile color design

What It Is / How It Works

This rear armrest protector cover is made for the back of the rear center armrest in a car interior. It fully wraps the back of the armrest and blocks scratches, shoe scuffs, foot stains and mud marks caused by passengers kicking.

Who It's For / Use Cases

Rear armrest protectors suit car owners who carry rear-seat passengers, especially children or anyone who tends to rest feet or hard items on the center console. They suit owners who want to keep the original interior trim looking clean without changing the car itself.

How to Use / Care

1. Use it to protect the back of the rear center armrest from kicks and scratches.

How to Choose

Start with the armrest shape in your vehicle, since a protector cover works best when its outline matches the armrest it covers. Consider how the cover will be used: a surface that is wear-resistant and easy to wipe suits households with children or frequent rear-seat passengers. If you want no glue or drilling, look for a cover that uses built-in fasteners.

Frequently Asked Questions

Does it need glue or drilling to install?
It uses built-in fasteners to attach directly to the rear armrest, with no glue, drilling or car modification required. It is easy to detach for cleaning.

Does it stop rattling when passengers kick the armrest?
The built-in soft buffer padding is meant to stop collision rattling when passengers kick or place hard items on the armrest. There is no harsh rubbing noise during driving.

Does the surface show footprints or spills?
The smooth, stain-resistant surface is designed to repel beverage spills, dirt and footprints. The design is waterproof and dustproof.

Does it match the interior color of my car?
Its classic low-profile color design blends naturally with most car interior trims.

Does it cover the whole armrest?
It fully wraps the back of the rear center armrest and blocks scratches, shoe scuffs, foot stains and mud marks caused by passengers kicking.

Key Features

• Mercedes-Benz W213 Fit — It is made for the Mercedes-Benz W213 E-Class.
• Single Cover Plate — One armrest box cover plate is included.

Product Specifications

• Material: ABS
• Color: Black
• Location: Rear
• Package: 1 armrest box cover plate
• Part number: 21392022073D92

What It Is / How It Works

This armrest box cover plate is a rear armrest part for the Mercedes-Benz W213 E-Class. It is a black ABS plastic plate that covers the rear armrest box.

Who It's For / Use Cases

Armrest box cover plates suit Mercedes-Benz W213 E-Class owners who need a replacement rear armrest box cover. Owners who want a plain black plastic cover in place of a worn or missing one will find this plate fits that role.

How to Use / Care

1. Use it to cover the rear armrest box of a Mercedes-Benz W213 E-Class.

How to Choose

Start with the vehicle, because this plate is made for the Mercedes-Benz W213 E-Class. Confirm that your car is that model before ordering.

Frequently Asked Questions

What is the cover made of?
It is made of ABS plastic and is black.

Which vehicle is it for?
This product is designed for specific models listed under Product Specifications → Compatible models. Confirm your exact model appears there before buying.

What comes in the package?
One armrest box cover plate is included.

Is it for the front or rear armrest?
It is a rear armrest part, so it is meant for the rear armrest box.

What is the part number?
The part number is 21392022073D92.

Keep dust and debris out of your Tesla's rear center console air vent with this custom-fit plastic dust cover. Designed specifically for the Tesla Model 3 and Model Y Highland and Juniper versions, it offers a clean, factory-style finish that blends right into your interior.

This dust cover is built from durable plastic that feels lightweight yet sturdy. It snaps into place over the rear center console back air vent without any tools or complicated steps. Once installed, it stays secure and prevents dust, crumbs, and small debris from getting into the vent area.

The design follows the original shape of the vent, so it does not look like an add-on. It keeps your Tesla's interior looking fresh and well-maintained with minimal effort. Whether you are protecting a new car or maintaining a pristine cabin, this cover is a simple upgrade that makes a real difference.

If you care about the small details that keep your Tesla in top condition, this dust cover is an easy, affordable choice.

Key Features and Benefits

- Custom-fit design for Tesla Model 3 and Model Y Highland and Juniper that ensures a precise fit on the rear center console back air vent

• Durable plastic construction that is both lightweight and sturdy for long-lasting protection

• Snap-fit installation that requires no tools or modifications for a quick, hassle-free setup

• Keeps dust and debris out of unused vents so your interior stays clean and factory-fresh

• Clean, OEM-style finish that blends seamlessly with your Tesla's interior look

Who Is This For

- Tesla Model 3 and Model Y owners who want to keep the rear vent area free of dust and debris

• Drivers who prefer a simple, tool-free installation without permanent changes to their vehicle

• Car enthusiasts who care about maintaining a pristine, like-new interior appearance

• Anyone looking for an affordable, practical accessory that protects a commonly overlooked area

Usage Scenario

Mark had owned his Tesla Model Y for about six months when he noticed dust and small crumbs collecting around the rear center console air vent. He tried cleaning it with a cloth, but debris kept getting stuck in the vent slats. After installing this dust cover, the vent stayed clean for weeks. He no longer worries about passengers dropping snacks or dirt into the vent, and the cover looks like it came with the car.

Micro Comparison

Some vent covers use adhesive strips that can leave residue or peel off over time. This dust cover uses a snap-fit design that holds securely without glue or tape. It is made specifically for Tesla Model 3 and Model Y Highland and Juniper models, so you get a precise fit that looks factory-installed rather than a generic cover that might shift or look out of place.

Specifications

- Material: Plastic

• Compatible: Tesla Model 3 and Model Y Highland and Juniper

• Placement: Rear center console back air vent

Package Includes

- 1 x Rear center console air vent dust cover

Why You Will Love It

This dust cover gives you one less thing to worry about when keeping your Tesla clean. It installs in seconds, stays put, and looks like it belongs there. For such a small detail, it makes a noticeable difference in how fresh and cared-for your interior feels every day.

Questions and Answers

Question: Is this dust cover compatible with the Tesla Model 3 Highland and Model Y Juniper?

Answer: Yes, this cover is designed specifically for the Tesla Model 3 and Model Y Highland and Juniper versions.

Question: Do I need any tools to install this dust cover?

Answer: No, it uses a snap-fit design that installs without any tools.

Question: Will this cover block the air flow from the rear vent?

Answer: The cover is designed to protect the vent from dust and debris while keeping the vent functional.

Question: What material is this dust cover made from?

Answer: It is made from durable plastic that is lightweight and sturdy.

Question: Does this cover fit the front air vents or only the rear?

Answer: It is designed for the rear center console back air vent only.

Key Features

• Replacement Part — It replaces the original cup holder in the rear center console.
• Original Part Specifications — It is made according to the original part specifications.
• Left and Right Drive — It can be used in both left-hand drive and right-hand drive cars.

Product Specifications

• Color: Original Black
• Material: PC and ABS
• Placement on Vehicle: Rear Center Console
• Weight: 0.4 kg (0.88 lb)
• Part numbers: 1K0862532, 1K0862532C

What It Is / How It Works

This black cup holder is a replacement part for the rear center console. It fits the VW Jetta 2006-2011 MK5, Golf 2007-2013 MK5 MK6, Rabbit 2006-2009, GTI 2007-2013 and EOS 2006-2011.

Who It's For / Use Cases

Replacement cup holders suit owners who want a direct swap for a worn, cracked or missing rear console holder. Anyone working on a rear center console refit will find this part type easy to match to the original position.

How to Use / Care

1. Replace the original cup holder with this part.
2. Use it in left-hand drive or right-hand drive cars.
3. If you cannot replace the part yourself, re-adjust it or take it to a local professional maintenance shop for installation.

How to Choose

Start with the vehicle: match your model and model years to the fit details, and confirm the part goes in the rear center console. Use the OEM numbers 1K0862532 and 1K0862532C to match against the original part. The color is Original Black.

Frequently Asked Questions

Which cars does it fit?
It fits the VW Jetta 2006-2011 MK5, Golf 2007-2013 MK5 MK6, Rabbit 2006-2009, GTI 2007-2013 and EOS 2006-2011.

What is it made of?
It is made of PC and ABS.

Can it be used in left-hand drive cars?
It can be used in both left-hand drive and right-hand drive cars.

What are the OEM numbers?
The OEM numbers are 1K0862532 and 1K0862532C.

Where does it go and what color is it?
It replaces the original cup holder in the rear center console and is Original Black.

Key Features

• Replacement Outer Frame — It is a replacement for the rear console air vent outlet grille outer frame.
• Left and Right-Hand Drive — Both left-hand and right-hand drive cars can use it.
• Mercedes-Benz GLE Fit — It is for the Mercedes-Benz GLE Class W167, 2020-2025.

Product Specifications

• Place on vehicle: Rear Console
• Compatible models: Mercedes-Benz GLE Class W167 and GLS Class W167, 2020-2025; Benz GLS GLE W167 350 400 450 500 580 2020–2025
• Manufacturer Part Number: 1678301600, 1678302104

What It Is / How It Works

This rear console air vent outlet grille outer frame is a replacement part for Mercedes-Benz GLE and GLS W167 vehicles.

Replacement outer frames for rear console vent grilles are sold to replace trim that has worn or been damaged.

Who It's For / Use Cases

Replacement outer frames for rear console vent grilles suit owners of Mercedes-Benz W167 models who need to replace worn or damaged vent trim. Independent repair shops and car owners handling interior trim repairs also use this type of part when the rear console vent area needs a matching frame.

How to Use / Care

1. Use it on left-hand drive or right-hand drive cars.
2. If you cannot replace the part yourself, have a local professional repair shop install it or re-adjust it.

How to Choose

Start with the vehicle. It is for the Mercedes-Benz GLE Class W167 and GLS Class W167, 2020-2025, so match the model and year before you order.

Choose by the rear console location and model range, then compare the Manufacturer Part Number in Product Specifications with the part you are replacing before buying. Confirm the frame sits in the rear console vent area you are repairing so the part matches the trim you are replacing.

Frequently Asked Questions

Which vehicles does it fit?
It is for the Mercedes-Benz GLE Class W167 and GLS Class W167, 2020-2025. The Compatible models row in Product Specifications lists the same models.

Can it be used on left-hand drive cars?
Both left-hand and right-hand drive cars can use it.

Is it a complete replacement grille?
It is a replacement for the rear console air vent outlet grille outer frame. The Place on vehicle row in Product Specifications shows it goes in the rear console.

Is it made to original specifications?
It is made to the original factory specifications, and the Manufacturer Part Number row in Product Specifications lists 1678301600 and 1678302104.

What if I cannot install it myself?
A local professional repair shop can install it or re-adjust it if you cannot replace the part yourself.

Key Features

• Rear Door Latch Striker — It is the lower latch striker for the rear door.
• Transit and Connect Fit — It fits the Transit MK6 MK7 2000-2014 and the Connect 2002-2012.

Product Specifications

• Piece Count: 1 pc
• OEM Number: 4125528, YC15-V441A07-AF, YC15V441A07AF
• Location: Rear Door Lower Latch Striker

What It Is / How It Works

This kit is a rear door lower latch striker, and the kit has one piece.

Lower latch strikers are the metal catch plates on a van's rear door frame that the door latch engages when the door closes.

Who It's For / Use Cases

Rear door latch strikers suit van owners and repair workshops replacing the lower catch on a rear door. They suit anyone who needs one replacement striker for a single rear door.

How to Use / Care

1. Use it as a replacement for the rear door lower latch striker.

How to Choose

Match the striker to the rear door and the lower position it is meant for. Use the part number and OEM numbers in the specifications to match the striker being replaced. Confirm the vehicle years and models before ordering.

Frequently Asked Questions

Which vehicles does it fit?
It fits the Transit MK6 MK7 2000-2014 and the Connect 2002-2012.

Is it a replacement or an original part?
It is an aftermarket replacement part, and its OEM numbers are 4125528, YC15-V441A07-AF and YC15V441A07AF.

How many pieces are in the pack?
The pack has one piece, a rear door lower latch striker.

What is the part number?
The part number is YC15V441A07AF, also written as YC15-V441A07-AF in the OEM numbers.

Where does it mount?
It is the lower striker on the rear door frame, the catch that the lower door latch engages.

Key Features

• Adjustable Rotating Hook — The hook rotates horizontally 360 degrees after installation, so it can be turned to suit the seat.
• Hidden Storage Design — When not in use, the hook can be hidden behind the rear headrest, keeping the seat area tidy.
• Lock Type Holder — The lock type holder keeps the phone in place while you drive.
• Lightweight Plastic Build — The hook is lightweight and made of resin and ABS.
• Non-Slip Silicone Contact — The silicone at the clips and brackets is non-slip and will not hurt your car or phone.

Product Specifications

• Material: Resin, ABS
• Color: Black
• Size: 12 × 5.5 × 3 cm (4.7 × 2.17 × 1.18 in)
• Weight: 72.5 g (2.56 oz)
• Mounting Type: Headrest
• Installation Type: Seat Installation
• Package Included: Car Seat Hook * 1
• Compatible models: GPS Navigation

What It Is / How It Works

This rear headrest car phone holder is a hook that mounts on the headrest bars and holds a phone for hands-free viewing. Its mounting type is headrest, so it is fitted to the seat rather than to the dashboard.

Who It's For / Use Cases

Rear-seat passengers who want a phone in view for videos or navigation without holding it tend to find a headrest-mounted holder useful. Drivers who keep bags, umbrellas or water bottles loose on the back seat can use a headrest hook to hang them off the seat. Shoppers who want to keep the seat area clear suit this type of hook.

How to Use / Care

1. Use the side opening to fit the hook onto the headrest bars; the headrest does not need to be removed.
2. Turn the hook horizontally to face the front or back of the seat as needed.
3. Clip your phone into the lock type holder when you want to watch videos or follow navigation.
4. When not in use, hide the hook behind the rear headrest.

How to Choose

Choose a headrest hook if the seat has headrest bars the hook can slide over and you want the phone and small items off the seat. Compare the size of 12 × 5.5 × 3 cm and the weight of 72.5 g with the space you have. Check that the hook suits the items you plan to carry, such as bags, hats or bottles, before you buy.

Frequently Asked Questions

What does it attach to?
It mounts on the headrest bars of the seat. Its mounting type is headrest and its installation type is seat installation.

What is it made of?
It is made of resin and ABS, and the colour is black.

Do I need to remove the headrest to fit it?
No. The side opening lets the hook go on without removing the headrest.

How big is it and how much does it weigh?
It measures 12 × 5.5 × 3 cm (4.7 × 2.17 × 1.18 in) and weighs 72.5 g (2.56 oz).

What comes in the package?
The package includes one car seat hook.

Key Features

• Black Finish — Finished in black, this spoiler adds a subtle dark accent to the rear roof line.
• ABS Plastic Build — Made from ABS plastic, a material known for its strength and resistance to impact.
• Decorative Styling — Designed to decorate the rear roof area, giving the vehicle a more customized appearance.

Product Specifications

• Brand: XUEHUAZHONG
• Material: ABS plastic
• Color: Black
• Placement: Rear Roof
• Model Year: 2013-2019
• Certification: CCC

What It Is / How It Works

This is a rear roof spoiler, an exterior trim piece that mounts on the back edge of a car's roof. It is crafted from ABS plastic and finished in black to blend with many vehicle color schemes. The spoiler is intended for decorative purposes, adding a sportier or more customized look to the vehicle's silhouette.

Who It's For / Use Cases

Rear roof spoilers appeal to car owners who want to personalize the exterior styling of their vehicle. They are often chosen by enthusiasts looking to add a subtle aerodynamic accent without a full body kit. This type of accessory suits those who prefer a black finish that can complement or contrast with the car's paint, and who value a lightweight yet durable material like ABS plastic for long-term use.

How to Use / Care

1. Clean the mounting area on the rear roof thoroughly to remove dirt, wax, and debris.
2. Dry the surface completely before positioning the spoiler.
3. Align the spoiler with the roof edge, ensuring it is centered and level.
4. Press the spoiler firmly into place, applying even pressure along its length.

How to Choose

When selecting a rear roof spoiler, consider the material, finish, and fit for your vehicle. ABS plastic is a lightweight and durable option commonly used for such accessories. The color should match or complement your car's paint; black is a versatile choice that works with many shades. Ensure the spoiler is designed for your vehicle's model year and roof shape to achieve a proper fit.

Frequently Asked Questions

What material is this rear roof spoiler made of?
It is made of ABS plastic, a type of plastic known for its strength and impact resistance.

What color is the spoiler?
The spoiler is black, which allows it to blend with many vehicle colors or create a contrast.

Where is the spoiler placed on the vehicle?
It is designed for placement on the rear roof of the vehicle.

Is this spoiler compatible with my BMW 3 Series?
The spoiler is intended for BMW 3 Series models from 2013 to 2019, but we recommend verifying fitment with your specific model and year before purchase.

Does the spoiler come with installation hardware?
The product listing does not specify included hardware. Typically, such spoilers may require adhesive tape or screws, but you should check the package contents upon delivery.

Key Features

• One-Handed Operation — The holder is designed for one-handed operation, so it can be used without the other hand.
• Quick Release Button — The design has a quick release button for releasing the holder.
• Anti-Slip Feature — The holder has an anti-slip feature in its design.
• Foldable Design — The holder is foldable, so it can be folded down when not in use.

Product Specifications

• Colour: As Shown
• Condition: 100% New
• Material: POLYESTER
• Placement on Vehicle: Rear
• Installation Type: Cup holder installation
• Compatible models: A3 A4 A6 A7 Q5 Q7 S3 2007–2016
• Part number: 8P0885995B

What It Is / How It Works

This drinks holder is a rear seat armrest cup holder, a cup holder installation placed at the rear of a vehicle. Drinks holders of this type give passengers in the back seat a place to set a beverage within reach.

Who It's For / Use Cases

Rear seat armrest drinks holders suit passengers seated in the back who want a stable spot for a cup, can, or bottle without reaching forward. They also suit owners who need a replacement rear cup holder for an armrest that no longer has one, or who want a compact holder that folds away when the armrest is in use.

How to Use / Care

1. If the part received is not the one ordered, or it arrived damaged in shipping so it cannot be used, provide a picture of the received part.

How to Choose

Start with the placement and installation details in the specifications, since this drinks holder is listed for rear placement as a cup holder installation. Compare those details against the rear armrest in your vehicle before ordering. If you want a holder that stores flat when not in use, look for a foldable design. If one-handed use matters, look for the one-handed operation feature. Choose a holder with an anti-slip feature if you want added grip for a cup or bottle.

Frequently Asked Questions

Is this holder for the rear seats?
Yes. The placement on the vehicle is Rear, and the installation type is cup holder installation for the rear armrest area.

What material is the holder made from?
The material is polyester. The color is shown in the product photos as As Shown, and the condition is 100% New.

Can the holder be folded and released?
The holder is foldable, and its design includes a quick release button for releasing the holder.

Can the holder be used with one hand?
The holder is designed for one-handed operation and includes an anti-slip feature in its design.

What should I do if the part arrived wrong or damaged?
If the part is not the one ordered or it arrived damaged in shipping so it cannot be used, provide a picture of the received part.

Key Features

• Secure Backrest Locking — It locks the seat backrest securely in position.
• Smooth Backrest Operation — It restores smooth operation of the seat backrest.
• Honda CR-V Fit — It fits the Honda CR-V 2012 through 2017.

Product Specifications

• Compatible models: Honda CR-V 2012, 2013, 2014, 2015, 2016, 2017
• OEM number: 82620-T0A-A01, 82620-T0A-A02, 82620-T0A-A03, 82220-T0A-A01, 82220-T0A-A02, 82220-T0A-A03
• Material: Aluminum alloy
• Weight: 0.6 kg (1.32 lb)

What It Is / How It Works

This rear seat back lock is an actuator for the rear seat backrest of a Honda CR-V. It is sold for the left and right rear seats and is listed with the Honda CR-V 2012 through 2017 model years.

Who It's For / Use Cases

Rear seat back locks suit Honda CR-V owners and repair shops who need a rear seat backrest to lock securely in position after the original lock has worn or failed. They also suit anyone replacing a lock on the left or right rear seat of a matching model year.

How to Use / Care

1. Use it as a rear seat back lock for the Honda CR-V to hold the backrest in position.

How to Choose

Start with the vehicle. Confirm the Honda CR-V model year falls within 2012 through 2017, then match the side, left or right, to the seat you are repairing. Compare the OEM numbers in Product Specifications with the number on the part you are replacing. Choose the side and OEM number that match before you buy.

Frequently Asked Questions

Which Honda CR-V years does it fit?
It fits the Honda CR-V 2012 through 2017, including the 2012, 2013, 2014, 2015, 2016 and 2017 model years.

Which OEM numbers does it match?
It matches OEM numbers 82620-T0A-A01, 82620-T0A-A02, 82620-T0A-A03, 82220-T0A-A01, 82220-T0A-A02 and 82220-T0A-A03.

Is it sold for the left or right side?
It is sold for the left and right rear seat backs, so choose the side that matches the seat you are repairing.

What is it made of?
It is made of aluminum alloy.

How much does it weigh?
It weighs 0.6 kg (1.32 lb).

Does it carry a certification?
It carries the iso9001 certification listed in its specifications.

Key Features

• Plastic Build — This clip is made from plastics, offering a lightweight and durable option for securing rear seat cushions.
• OEM Reference — It carries the OEM reference 883040M000, which can help you match it to the original part you are replacing.
• New Condition — This clip is sold as a new item, so you receive a fresh component for your vehicle.
• Vehicle Fit — It is associated with the Nissan Cefiro A32, a model that this clip is intended to fit.

Product Specifications

• Material: Plastics
• OEM: 883040M000
• Condition: New
• Brand Name: YUEYANG

What It Is / How It Works

This is a fastener and clip designed for automotive interior use. It is a rear seat cushion clip that helps hold the seat cushion in place, and it carries the OEM reference 883040M000.

Who It's For / Use Cases

Car clips like this one are useful for vehicle owners who are replacing worn or broken interior fasteners. They are also handy for mechanics and DIY enthusiasts working on seat repairs or interior restoration.

How to Use / Care

1. Inspect the clip to confirm it matches the shape and size of the original fastener you are replacing.
2. Position the clip so it aligns with the mounting point on the seat frame or cushion.
3. Press the clip into place until it snaps or locks securely.
4. Check that the seat cushion sits firmly and does not shift when pressure is applied.

How to Choose

When selecting a replacement clip, consider the material and the OEM reference number. Plastic clips are common for interior trim and offer a balance of strength and flexibility. Matching the OEM number helps ensure compatibility with your vehicle's seat assembly.

Frequently Asked Questions

What type of product is this?
This is a fastener and clip, specifically a rear seat cushion clip for automotive use.

What material is the clip made from?
The clip is made from plastics, which provides a lightweight and durable option for securing seat cushions.

What is the OEM reference number?
The OEM reference number is 883040M000, which can help you verify that this clip matches the original part.

Which vehicle is this clip intended for?
This clip is associated with the Nissan Cefiro A32 model.

Key Features

• Built for Repeated Use — It is manufactured from high-strength materials and built to withstand repeated use and force.
• Vehicle Fitment — It fits the VW Golf 2 and 3 (1984-1999), VW Polo 6N, 6N1 and 6N2 (1994-2002), VW Caddy 2 (1995-2008), VW Jetta A3 (1992-1998), VW Vento (1992-1998), Seat Ibiza 6K (1993-2002) and Seat Cordoba 6K1 and 6K2 (1993-2002).

Product Specifications

• Piece Count: 2 pcs
• Color: Black
• Material: PU
• Part number: 1H0885683
• Size: 4.4 × 10 mm (0.17 × 0.39 in); 113 mm (4.45 in)

What It Is / How It Works

This car rear seat hinge control knob is sold as a 2-piece set for the listed VW and Seat models.

How to Choose

Each listed VW and Seat model has its own year range, so match your car's make, model and build years to the listed models first.

Frequently Asked Questions

What material is it made of?
It is made of PU and is built to withstand repeated use and force.

How many pieces are in a pack?
The pack contains 2 pieces.

What is the OEM number?
The OEM number is 1H0885683.

Which vehicles does it fit?
It fits the VW Golf 2 and 3 (1984-1999), VW Polo 6N, 6N1 and 6N2 (1994-2002), VW Caddy 2 (1995-2008), VW Jetta A3 (1992-1998), VW Vento (1992-1998), Seat Ibiza 6K (1993-2002) and Seat Cordoba 6K1 and 6K2 (1993-2002).

What color is it?
It is black.

Key Features

• Scratch Resistant — The surface resists scratches from everyday items like keys or bags.
• Tilt Head — The tilt function lets you adjust the screen angle to reduce glare.
• Stand Is Lightweight — The stand is lightweight, so it adds minimal bulk to the seat area.

Product Specifications

• Brand Name: ATDTING
• Color: Black
• Package Size: 15 × 12 × 5 cm (5.9 × 4.7 × 1.97 in)
• Installation Type: Seat Installation
• Drive: Left-hand drive and right-hand drive

What It Is / How It Works

This is a rear seat magnetic phone and tablet stand designed for Tesla Model 3 and Model Y from 2021 to 2025. It mounts to the seat to hold a device for passengers. The stand itself is included, but the pad or phone is not.

Who It's For / Use Cases

Rear seat device holders suit families who want to keep kids entertained on longer drives, or passengers who like to watch videos or follow maps hands-free. They also help adults keep a phone or tablet within easy reach without holding it.

How to Use / Care

1. Attach the stand to the seat back or headrest area where you want it positioned.
2. Place your phone or tablet against the magnetic surface and let it snap into place.
3. Rotate or tilt the head to set the viewing angle that works best for the passenger.
4. Remove the device when not in use to keep the seat area clear.

How to Choose

When picking a rear seat device holder, check that it fits your vehicle's seat type and that the magnetic grip is strong enough for your device size. Consider how much angle adjustment you need for comfortable viewing, and whether the finish matches your car's interior.

Frequently Asked Questions

Which Tesla models does this stand fit?
This stand is designed for Tesla Model 3 and Model Y from 2021 to 2025.

Does the stand come with a tablet or phone?
No, the stand is sold without a pad or phone. You attach your own device to the magnetic holder.

Can I adjust the viewing angle?
Yes, the stand has a rotatable head and a tilt function, so you can set the screen to a comfortable angle.

How is the stand installed?
It uses seat installation, meaning it attaches to the seat area without tools.

Key Features

• Vehicle Fit — Designed for the Toyota Highlander 2015-2021.
• Rear Seat Placement — Placed on the rear and 2nd row of the vehicle.
• Connector Design — Has a correct connector, and installation requires no cutting or splicing.
• Easy Installation — Easy install and durable use.

Product Specifications

• Vehicle Fit: Toyota Highlander 2015-2021
• Placement on Vehicle: Rear and 2nd Row
• Material: PP
• Package Contents: 1 auto seat rail cover
• Measurement Tolerance: Allowed error +/- 1-3 cm

What It Is / How It Works

This car rear seat rail cover is a replacement auto interior part for the 2nd row middle seat track on the Toyota Highlander 2015-2021.

Who It's For / Use Cases

Car rear seat rail covers suit Toyota Highlander owners who need a replacement cover for a rear or second-row seat rail, including cases where the original cover is worn, damaged, or missing. They also suit owners who want a matching interior part for the rear seating area.

How to Use / Care

1. Easy install and durable use: fit the cover on the rear and 2nd row middle seat rail of the Toyota Highlander 2015-2021.

How to Choose

Start with the vehicle. This cover is listed for the Toyota Highlander 2015-2021, so confirm your vehicle matches that model and year range before ordering. Next, check seat position. The cover is for the rear and 2nd row, so it suits the middle seat rail in that area. Material is PP, a plastic, so it suits the interior rail cover role it is made for. Finally, allow for small size differences: the measurement allowed error is +/- 1-3 cm, so compare the cover to your existing rail cover if you have one.

Frequently Asked Questions

Which vehicle is this cover for?
It is made for the Toyota Highlander 2015-2021 and is placed on the rear and 2nd row middle seat rail.

What material is it made from?
The material is PP, as shown in the Specifications section.

What do I receive in the package?
The package contains 1 auto seat rail cover.

Does installation require cutting or splicing?
No. The connector is designed so installation requires no cutting or splicing.

Why might the color or size look slightly different from the photos?
Lighting and display settings can change how the color appears, and the measurement allowed error is +/- 1-3 cm.

Key Features

• Automotive Grade Plastic — It is made of ABS plastic, an automotive grade material.
• Lift Assist Vehicles — It is made for vehicles with lift or gate assist.
• Two-Piece Set — Two tailgate bushings are included in each set.
• Right Side Fit — It is the right passenger side tailgate bushing.

Product Specifications

• Material: ABS plastic
• Interchange part numbers: 84131760, 22966936, 84331136
• Quantity: 2 tailgate bushings
• Side: Right (passenger)

What It Is / How It Works

This tailgate bushing is the right passenger side part for trucks with lift or gate assist. It is made for Chevrolet Silverado 1500 2014-2019, Silverado 2500HD and 3500HD 2015-2020, Colorado 2015-2020, GMC Sierra 1500 2014-2019, Sierra 2500HD and 3500HD 2015-2020, and GMC Canyon 2015-2020.

Who It's For / Use Cases

Tailgate bushings suit pickup owners who are replacing a worn or damaged bushing on a tailgate that uses lift assist. They fit into routine truck maintenance for anyone who relies on a pickup for work or family use.

How to Use / Care

1. Use it to replace the rear tailgate bushing on a vehicle with lift assist.
2. Instructions are not included, and professional installation is recommended.

How to Choose

Start with the vehicle. Match the make, model and year range to your truck, then confirm the side matches the bushing you are replacing. If your tailgate uses lift assist, choose a bushing made for lift or gate assist.

Frequently Asked Questions

Is it sold as one piece?
The pack has 2 tailgate bushings for vehicles with lift or gate assist.

What material is it made of?
It is made of heavy duty, automotive grade ABS plastic.

Which side is it for?
It is the right passenger side tailgate bushing.

Key Features

• Vehicle Fitment — It fits the VW Golf 7 MK7 for model years 2013-2017 and 2019.
• OEM Part Numbers — The OEM numbers are 5GG 864 298 A and 5GG 819 203.

Product Specifications

• Fitment: For Golf 7 MK7 2013-2017 2019
• OEM number: 5GG 864 298 A, 5GG 819 203
• Compatible models: VW Golf 7 MK7 2013/2014/2015/2016/2017/2019 5GG 864 298B
• Specification: 82V

What It Is / How It Works

A rear trim frame is an interior trim piece that surrounds a vehicle component such as an air vent outlet or a center armrest area. Trim frames cover the edges of these parts so the panel looks finished and sits flush with the surrounding interior.

Who It's For / Use Cases

Rear trim frames suit owners and technicians who are replacing a worn or damaged interior trim piece around an air vent outlet or armrest area. They also suit anyone restoring the finished look of a dash or console panel on a compatible vehicle.

How to Use / Care

1. Use it as an interior trim frame that fills the edge around the air vent outlet and center armrest area.

How to Choose

Start with the vehicle model and model year, since the fitment range decides whether the frame matches your car. Choose the frame that covers the same component area as the original trim.

Frequently Asked Questions

Which vehicles does it fit?
It fits the VW Golf 7 MK7 for model years 2013-2017 and 2019.

What OEM numbers does it carry?
The OEM numbers are 5GG 864 298 A and 5GG 819 203.

What does a rear trim frame cover?
A rear trim frame covers the edges around a vent outlet or armrest area so the interior panel looks finished.

Is it a replacement trim piece?
Trim frames are typically used to replace a worn or damaged interior trim piece around the same component area.

Key Features

• Metal Construction — These rear lift supports are made from metal material for durable performance.
• Pair Set — This set includes one pair of lift supports, so you can replace both sides at once.
• Black Finish — The supports have a black exterior that blends with the vehicle's under-trunk area.
• E90 Fitment — Designed for BMW 3 Series E90 Saloon models from 2005 to 2011.

Product Specifications

• Piece Count: 1 pair
• Material: Metal
• Color: Black
• Fitment: BMW 3 Series E90 Saloon 2005-2011

What It Is / How It Works

These are rear lift struts supports, a pair of metal rods that help hold up the trunk lid of a BMW 3 Series E90 Saloon. They are designed to replace worn-out supports so the trunk opens and stays open smoothly.

Who It's For / Use Cases

Rear lift supports are for BMW E90 owners who notice the trunk lid dropping or struggling to stay open. They suit anyone doing a straightforward replacement of worn struts, whether for routine maintenance or restoring proper trunk function.

How to Use / Care

1. Open the trunk and support the lid securely so it cannot fall while you work.
2. Remove the old lift supports by releasing the clips or fasteners at each end.
3. Attach the new supports in the same mounting points, pressing each end until it clicks into place.
4. Lower the trunk lid slowly to confirm it opens and stays open without sagging.

How to Choose

When choosing rear lift supports, check the vehicle model and year to ensure the mounting points and length match. A pair set is convenient because it lets you replace both sides at once.

Frequently Asked Questions

What vehicles are these lift supports for?
These are designed for BMW 3 Series E90 Saloon models from 2005 to 2011, including specific trims like 323i, 325i, 328i, 335i, and M3. Check the fitment details to confirm your exact model.

What material are they made of?
They are made of metal material, which provides sturdy support for the trunk lid.

How many supports come in this set?
The set includes one pair of lift supports, so you can replace both sides at once.

What color are the supports?
The supports have a black exterior, which blends with the under-trunk area.

Key Features

• Replacement Part — It is offered as a replacement part for the rear trunk mat carpet handle.
• Factory Specification — It is made to the original factory specifications.
• Material Makeup — It is made of PC, ABS and PA6 with rubber oil painting.
• Left and Right Drive — It can be used on both left-hand drive and right-hand drive cars.
• Trunk Appearance — It is meant to refresh the look of the car's rear trunk area.

Product Specifications

• Material: PC, ABS and PA6 with rubber oil painting
• Color: Original Black
• Weight: 104.2 g (3.7 oz)
• Place on vehicle: Rear Trunk
• Part number: 0996800184

What It Is / How It Works

This car rear trunk mat carpet handle is a replacement part for the rear trunk. It is made of PC, ABS and PA6 and comes in Original Black.

Who It's For / Use Cases

Owners of the Mercedes-Benz models listed in the fitment answer below may need a rear trunk mat carpet handle when the original part is worn or damaged. It suits people who want a replacement handle for the rear trunk area of a supported model and who want the part to match the original factory specifications.

How to Use / Care

1. Fit it on a left-hand drive or right-hand drive car, since both can be used.
2. If fitting it yourself is difficult, re-adjust it or take it to a local professional repair shop for installation.

How to Choose

Start with the vehicle model and generation, then check the model years in the fitment answer below. Match your car's year range before ordering. Drive side is not a selection factor, because both left-hand and right-hand drive cars can use it. Compare the dimensions and weight in Product Specifications with the part you are replacing so the size matches.

Frequently Asked Questions

Which Mercedes-Benz models does it fit?
It fits CLA W117 (2013-2019), A Class W176 (2013-2018) and W177 (2019-2024), B Class W246 (2011-2019) and W247 (2020-2024), GLA W156 (2011-2019) and W247 (2020-2024), GLB W247 (2020-2024) and C Class W205 (2015-2021). Other listed fits are GLK X204 (2008-2015), ML Class W166 (2012-2015), GL Class W166 (2013-2015), GLS Class W166 (2016-2019) and W167 (2020-2024), GLE Class W166 and W292 (2015-2019) and W167 (2020-2024), and GLC Class W253 (2016-2019).

Does it work on left-hand and right-hand drive cars?
It can be used on both left-hand drive and right-hand drive cars.

What is it made of?
It is made of PC, ABS and PA6 with rubber oil painting, in Original Black.

What is the part number?
The interchange part number is 0996800184.

What if I cannot fit it myself?
You can re-adjust it or take it to a local professional repair shop to install it.

Key Features

• IP68 Waterproof Rating — It carries an IP68 waterproof rating for outdoor exposure.
• 170° Wide Angle — The lens gives a 170° wide viewing angle behind the vehicle.
• CCD Imaging Sensor — It uses a CCD imaging sensor for the rear view image.
• Night Vision Range — It supports night vision within 3 meters (9.8 ft).

Product Specifications

• Measurement: 4.3Inch
• Length of Video Cable: 6 m (19.7 ft)
• Effective pixels: 720*480
• Power supply: 12V
• Video signal: AV
• Video system: NTSC
• Wire or Wireless: Wire
• Lens Material: Plastic + Glass

What It Is / How It Works

This rear view camera system for vehicles has a 4.3Inch monitor display. A reversing camera like this gives the driver a view of the area behind the vehicle while backing up.

Who It's For / Use Cases

Rear view camera systems suit drivers who back up often and want a view of the space behind the vehicle. This system is made for cars, trucks, RVs and mini-vans, and it can be used in a car or at home.

How to Use / Care

1. Use the rear view camera in a car or at home, since it is weatherproof.
2. Install the monitor using the mount holder or the universal bracket.

How to Choose

Start with the vehicle type, since this system is made for cars, trucks, RVs and mini-vans. Finally, decide where the 4.3Inch monitor will sit so the rear view stays easy to see.

Frequently Asked Questions

Is the camera waterproof?
It has an IP68 waterproof rating and is weatherproof for use in a car or at home.

What viewing angle does it have?
The lens has a 170° wide angle, and it supports night vision within 3 meters (9.8 ft).

What power does it need?
It runs on 12V power.

Which certifications does it carry?
It carries CE and FCC certification marks.

Key Features

• ABS Material — The cover is made of ABS plastic.

Product Specifications

• Material: ABS
• Color: Black
• Compatible models: VW Golf 7 MK7 7.5 GTI; Touran 2012–2020. Confirm your vehicle's make, model and year before ordering.

What It Is / How It Works

This rear view mirror cover is a replacement cover for the mirror housing. It is made of ABS and is black.

Who It's For / Use Cases

Rear view mirror covers suit drivers who want to replace a mirror housing cover on a car it is made to fit.

How to Use / Care

1. Use it to replace the rear view mirror housing cover on a compatible vehicle.

How to Choose

Start with the vehicle. Compare your car's make, model and model year with the Compatible models row in Product Specifications before ordering. If you want a black replacement, check the Color row.

Frequently Asked Questions

What is the cover made of?
It is made of ABS plastic.

What color is it?
It is black.

Which cars is it made for?
The Compatible models row in Product Specifications shows the same vehicles.

Key Features

• Left and Right Pair — The pack includes two covers, one for the left side mirror and one for the right.
• Glossy Black Finish — The cover has a glossy black finish with a carbon fiber look.

Product Specifications

• Piece Count: 2 pcs
• Compatible models: SEAT Leon Mk3 5F (ST / FR / Cupra) 2012-2020; SEAT Ibiza Mk5 2017-2020; SEAT Arona KJ7 2017-2020

What It Is / How It Works

Rear view mirror covers are add-on caps that sit over the outside of a car's side mirror housing.

This set contains 2pcs, a left and right rear view mirror cover for SEAT Leon Mk3 5F, Ibiza Mk5 and Arona KJ7 models.

Who It's For / Use Cases

This set suits owners of the SEAT Leon Mk3 5F, Ibiza Mk5 and Arona KJ7 who want a glossy black mirror cover with a carbon fiber look on both side mirrors.

How to Use / Care

1. Use it as a rear view mirror cover cap on the side mirror of a compatible SEAT model.

How to Choose

Start with the model list in Product Specifications under Compatible models and match your SEAT Leon, Ibiza or Arona to its model years. The set has two pieces, so one cover goes on each side mirror. Confirm the make and model before you order.

Frequently Asked Questions

How many pieces are in the pack?
The pack has 2 pcs, a left cover and a right cover for the two side mirrors.

Which SEAT models does it fit?
It fits the SEAT Leon Mk3 5F (ST / FR / Cupra) 2012-2020, the SEAT Ibiza Mk5 2017-2020 and the SEAT Arona KJ7 2017-2020.

What finish does the cover have?
The cover has a glossy black finish with a carbon fiber look.

Who makes this cover?
The brand is phirikes.

Does it carry a certification?
It carries CCC certification.

Key Features

• PVC Vinyl Material — The decal is made from PVC, a vinyl material suited to flat decorative sticker graphics.
• Compact Decal Size — The size is S:10x2 cm, a small format for the open area of a mirror.
• Rear View Mirror Use — The recommended space for this decal is the car rear view mirror.
• Single-Piece Package — The decal is sold as a single-piece package.
• Modern Style Design — The design follows a modern style with a motivational quote theme.

Product Specifications

• Material: PVC
• Dimensions: S:10x2 cm
• Recommended Spaces: Car Rear View Mirror
• Specification: Single-piece Package
• Style: Modern Style

What It Is / How It Works

This car rear view mirror vinyl sticker decal is a PVC decal measuring S:10x2 cm, with the car rear view mirror as its recommended space. Decal stickers of this kind are flat printed graphics used as small decorative accents in vehicle interiors.

Who It's For / Use Cases

Car owners who enjoy small decorative accents often choose vinyl decal stickers to add a personal touch inside the vehicle. Motivational quote designs suit drivers who like encouraging phrases in view while they drive, and the compact format suits anyone who prefers a subtle accent rather than a large graphic.

How to Use / Care

1. Use this decal as a decorative accent on a car rear view mirror.

How to Choose

Start by comparing the S:10x2 cm size against the open area you plan to decorate on your mirror. A smaller decal suits a narrow accent spot, while the stated size helps you judge whether the placement feels balanced.

Consider the look you want inside your car. This decal uses a modern style with a motivational quote theme, so it works best for drivers who want a clean, contemporary accent rather than a traditional or ornate design.

Frequently Asked Questions

What size is this decal?
The size is S:10x2 cm. Measure the open area on your car rear view mirror first to confirm the decal suits the spot you have in mind.

What material is it made from?
The decal is made from PVC, a vinyl material commonly used for flat decorative sticker graphics.

Where is this decal meant to go?
The recommended space is the car rear view mirror, so that is the intended placement for this decal.

What style is the design?
The design follows a modern style and carries a motivational quote theme as its main graphic idea.

How many pieces are in the package?
The package is a single piece, so one decal is sold per order.

Key Features

• Rear Window Fit — It sticks right to the rear window glass and is designed to fit most rear windows with full visibility.

Product Specifications

• Material: Nylon mesh cloth
• Size: approx 100x50cm (39.4 × 19.7 in)

What It Is / How It Works

This rear window sun shade is made of nylon mesh cloth and measures approx 100x50cm (39.4 × 19.7 in). It sticks to the rear window glass to help keep the cabin cool while letting you see outside.

Who It's For / Use Cases

Rear window sun shades suit drivers who park in direct sunlight and want a cooler cabin when they return to the car. Drivers who want shade and a view out of the back window will find a mesh design suitable.

How to Use / Care

1. Stick the shade to the rear window glass.
2. Leave it in place while parked to help keep the car cool.
3. When not in use, fold the shade up and store it.

How to Choose

Start with the window size. The shade measures approx 100x50cm (39.4 × 19.7 in), so compare that against your rear window before ordering. The store sells 1-piece and 2-piece options, so pick the count that fits how many shades you need. Mesh suits owners who want shade with a view outward.

Frequently Asked Questions

What size is it?
It measures approx 100x50cm (39.4 × 19.7 in).

What is it made of?
It is made of nylon mesh cloth. The mesh blocks sunlight and still lets you see outside through the car's rear window.

Does it fit most rear windows?
It is designed to fit most rear windows and sticks right to the rear window glass.

What is in the package?
The package includes 1 vehicle back window shield.

How do I store it?
It folds up and stores nicely when not in use.

Key Features

• Rubber Wiping Edge — The rubber wiping edge is shaped to follow the curvature of the rear windscreen for a clean, streak-free wipe.
• Direct Fit Design — Made for the Skoda Octavia Mk2 Estate 2005-2013 rear arm, so it installs without adapters or extra parts.
• 16 Inch Length — The 16 inch length matches the original rear wiper size for full coverage of the rear window.
• Rear Window Shaping — Shaped and tensioned specifically for rear window curvature, giving consistent contact across the glass.

Product Specifications

• Material: Rubber
• Dimensions: 16 in
• Size: 16 in
• Placement: Rear

What It Is / How It Works

This rear windscreen wiper arm blade is a replacement blade for the Skoda Octavia Mk2 Estate, covering model years 2005 through 2013. The 16 inch blade has a rubber wiping edge that conforms to the curvature of the rear windscreen, and it is built to the mounting requirements of the Octavia Mk2 Estate rear wiper arm for a secure fit without adapters or modifications.

Who It's For / Use Cases

This blade suits Skoda Octavia Mk2 Estate owners with model years 2005 through 2013 who need a rear wiper replacement. It is a practical choice for drivers who want a direct-fit blade without extra adapters or parts, and for anyone replacing a worn, streaking, or noisy rear wiper on an estate car.

How to Use / Care

1. Installation is straightforward, and the blade is ready to use right out of the box.

How to Choose

Check the model year and body style first: this blade is made for the Octavia Mk2 Estate from 2005 through 2013 and is not intended for the hatchback version. Confirm the rear wiper size matches the 16 inch factory length, and choose a rubber wiping edge if you want a clean wipe in wet weather.

Frequently Asked Questions

Does this wiper blade fit the Skoda Octavia Mk2 Estate hatchback?
This wiper blade is designed specifically for the Octavia Mk2 Estate model. It is not intended for the hatchback version.

What size is this rear wiper blade?
It is a 16 inch blade, which matches the factory rear wiper size for the Octavia Mk2 Estate.

Is this a complete wiper arm or just the blade?
This is a rear windscreen wiper arm blade. It replaces the rubber blade on your existing wiper arm.

Will this fit my 2010 Skoda Octavia Estate?
Yes, it fits the Octavia Mk2 Estate from 2005 through 2013, including the 2010 model year.

Is the rubber material durable for all weather conditions?
The rubber wiping edge is designed to perform in rain, snow, and general wet conditions, providing a clean wipe during daily driving.

Restore clear rear visibility on your Chevrolet Spark with a direct replacement rear windshield wiper arm assembly. This kit includes the arm, cover, and blade, designed to fit models from 2011 to 2017.

A worn or damaged rear wiper arm can leave streaks and reduce your view of the road. This replacement assembly is built to handle rain and snow on the back glass, helping you drive with more confidence in any weather. The structured PBT arm and integrated blade work together for consistent contact with the glass surface.

This kit is a practical solution for when your current wiper arm is cracked, loose, missing, or wiping unevenly. It comes as a complete set with the arm, cover, and blade, so you have everything needed for a full replacement. Professional installation is recommended to ensure proper fit and function.

Designed for a direct replacement on compatible Chevrolet Spark models, this wiper arm assembly matches OE part numbers 95995875, 96688389, and A0064A0005. Always verify your vehicle's specific model year and existing part number before purchasing to confirm compatibility.

Key Features and Benefits

- Complete replacement assembly that includes the arm, cover, and blade for a straightforward rear wiper swap

• PBT construction that provides a durable structure designed to withstand weather exposure

• Direct fit design that helps the blade maintain consistent contact with the rear glass for a cleaner wipe

• Compatible with multiple model years to simplify finding the right part for your Spark or Spark EV

• Replaces worn or damaged factory arms to restore proper rear visibility in rain and snow

Who Is This For

- Chevrolet Spark owners with a cracked, loose, or missing rear wiper arm from 2011-2017 models

• Chevrolet Spark EV drivers looking for a rear wiper replacement for 2014-2016 model years

• DIY car owners who want a complete arm-and-blade kit for a single-step replacement

• Drivers who need a reliable rear wiper solution before winter or rainy seasons

Usage Scenario

Lisa noticed her 2014 Chevrolet Spark's rear wiper was leaving a wide streak across the back window every time it rained. The arm felt loose and the blade lifted off the glass on one side. She ordered this replacement kit, and after having a local shop install it, the rear window stayed clear during her morning commute through a heavy downpour. The new arm held the blade firmly against the glass, giving her a full view of traffic behind her.

Micro Comparison

This kit provides a complete rear wiper arm and blade assembly rather than just a refill blade. Replacing the entire arm ensures the spring tension and alignment are restored, which a blade-only swap cannot fix if the arm itself is worn. It is a direct-fit option for specific Chevrolet Spark and Spark EV years, making it easier to match your vehicle without modifications.

Specifications

- Material: PBT

• Color: Black

• Placement On Vehicle: Rear

• Part Numbers: 95995875, 96688389, A0064A0005

• Compatible with Chevrolet Spark 2013-2015

• Compatible with Chevrolet Spark EV 2014-2016

Package Includes

- 1 Set x Rear Windshield Wiper Arm With Cover and Wiper Blade

Why You Will Love It

You will appreciate the convenience of a complete kit that includes the arm, cover, and blade in one package. It saves you the trouble of hunting for separate components. Knowing you have a direct-fit replacement means less time checking compatibility and more time driving with a clear rear view.

Questions and Answers

Question: Will this fit my 2012 Chevrolet Spark?

Answer: This kit is listed as compatible with Chevrolet Spark models from 2011 to 2017, so it should fit your 2012 Spark. We recommend checking your existing part number to confirm.

Question: Is this a complete set or just the arm?

Answer: This is a complete set that includes the rear wiper arm, the cover, and the wiper blade.

Question: Do I need to buy a separate blade for this arm?

Answer: No, a blade is included with this arm assembly. You do not need to purchase a separate blade.

Question: Can I install this myself?

Answer: Professional installation is recommended to ensure the arm fits the motor shaft correctly and the blade contacts the glass evenly.

Question: How do I know if this matches my car's part?

Answer: Check the original part number on your current wiper arm. This kit matches OE numbers 95995875, 96688389, and A0064A0005.

Question: Will this work on a Chevrolet Spark EV?

Answer: Yes, this kit is compatible with Chevrolet Spark EV models from 2014 to 2016.

Restore clear rear visibility on your Peugeot 407 SW or Citroen C5 with this complete rear wiper arm and blade set. Designed as a direct replacement, this kit provides a simple solution for worn or broken rear wipers, helping you maintain a safe view behind your vehicle in rain and snow.

Product Description

Driving with a damaged rear wiper can leave you with a smeared or obstructed view, especially in bad weather. This rear wiper arm and blade set is built to replace the original equipment on your Peugeot 407 SW (2004-2015) or Citroen C5 (2001-2008). It comes as a complete unit, so you do not need to buy the arm and blade separately.

The arm and blade are made from durable PVC material, designed to handle daily use and exposure to the elements. The blade measures 30 cm / 11.8 inches, while the arm is 29 cm / 11.4 inches long, matching the factory dimensions for a proper fit. The entire assembly is finished in black to blend in with your vehicle's rear window area.

Installation is straightforward for those with basic mechanical experience, as it mounts onto an 8mm bolt. Professional installation is recommended if you are not comfortable with the process. This set is an aftermarket replacement, offering a cost-effective way to restore your rear wiper function without visiting a dealership.

Key Features and Benefits

- Complete rear wiper arm and blade assembly that provides everything needed for a full replacement

• PVC construction that offers resistance to weather and wear for longer service life

• 30 cm / 11.8 inch blade length that matches the original equipment for effective wiping coverage

• 29 cm / 11.4 inch arm length that ensures proper positioning against the rear glass

• Black finish that maintains a factory-like appearance on your vehicle

• Compatible with 8mm bolt mounting system for straightforward installation

Who Is This For

- Drivers of Peugeot 407 SW models from 2004 to 2015 needing a rear wiper replacement

• Owners of Citroen C5 models from 2001 to 2008 looking for a direct fit rear wiper set

• DIY enthusiasts who prefer to replace worn wiper components themselves

• Anyone wanting an affordable aftermarket alternative to expensive dealer parts

Usage Scenario

Mark noticed his rear wiper was leaving streaks across his Peugeot 407 SW's back window, making it hard to see cars behind him on rainy mornings. He ordered this complete arm and blade kit, swapped out the old assembly in about 15 minutes, and now enjoys a clean, clear view every time he hits the road.

Micro Comparison

While some sellers offer only the wiper blade or the arm separately, this kit includes both components in one package. This saves you the trouble of matching parts from different sources and ensures the arm and blade work together correctly. It is a practical choice for a complete rear wiper refresh.

Specifications

Material: PVC

Color: Black

Blade Length: 30 cm / 11.8 in

Arm Length: 29 cm / 11.4 in

Placement: Rear

Mounting Bolt Size: 8mm

Package Quantity: 2 pieces (1 wiper blade + 1 wiper arm)

Package Includes

1x Wiper Blade

1x Wiper Arm

Why You Will Love It

This rear wiper set takes the guesswork out of finding the right replacement for your Peugeot or Citroen. It is a complete, ready-to-install kit that matches your vehicle's original dimensions, so you can get back on the road with confidence and a clear rear view.

Questions and Answers

Question: Will this fit my Peugeot 407 SW from 2010?

Answer: Yes, this set fits Peugeot 407 SW models produced from 2004 to 2015.

Question: Does this include both the arm and the blade?

Answer: Yes, the package includes one wiper arm and one wiper blade.

Question: What is the blade length?

Answer: The blade is 30 cm / 11.8 inches long.

Question: Is installation difficult?

Answer: It mounts on an 8mm bolt. Professional installation is recommended if you are not experienced with wiper replacement.

Question: Will this work on a Citroen C5 from 2005?

Answer: Yes, it fits Citroen C5 models from 2001 to 2008.

Replace your worn-out rear wiper with this complete arm and blade set, designed specifically for the MG ZS EV, ZSEV, and EZS models from 2017 to 2023. It restores clear visibility through your rear windshield, helping you drive safely in rain or snow.

This kit includes both the wiper arm and the wiper blade, so you get everything you need in one package. It is built from durable plastic, metal, and rubber to handle daily use and changing weather conditions. The set is a direct replacement part, which means it fits onto your vehicle without any modifications.

This aftermarket part matches the OEM number 10387825 and is made to work with your MG. It installs easily and provides a clean, streak-free wipe across the rear window. Keep your view clear and your driving stress-free with this simple upgrade.

Whether you are dealing with light drizzle or heavy rain, this rear wiper set helps you see what is behind you. It is a practical replacement for an older worn-out wiper that no longer cleans effectively.

Key Features and Benefits

- Complete set includes both the rear wiper arm and blade for a full replacement

• Direct fit for MG ZS EV, ZSEV, and EZS models from 2017 to 2023

• Made from plastic, metal, and rubber for long-lasting performance

• Restores clear rear visibility in rain, snow, and road spray

• Aftermarket part with OEM number 10387825 for accurate compatibility

Who Is This For

- MG ZS EV and ZSEV owners from 2017 to 2023 needing a rear wiper replacement

• Drivers who want a simple, complete kit instead of buying the arm and blade separately

• Anyone whose current rear wiper is leaving streaks, squeaking, or not making full contact

• Car owners looking for an affordable aftermarket alternative to a dealer part

Usage Scenario

Emily drives her MG ZS EV to work every day, and during the rainy season, her old rear wiper left a messy smear across the glass. She could barely see cars behind her. After installing this replacement arm and blade set, the rear window clears up with a single swipe. Now she feels safer changing lanes and reversing in wet weather.

Micro Comparison

Unlike buying a generic universal wiper that may not fit properly, this set is made specifically for the MG ZS EV and ZSEV series. It includes both the arm and blade, so you do not have to hunt for a separate part. It is a practical, direct-fit solution that saves time and gives you confidence in your purchase.

Specifications

- Material: Plastic, metal, rubber

• Placement: Rear

• OEM Number: 10387825

• Fitment: For MG ZS EV ZSEV 2017-2023 EZS

Package Includes

- 1 x Rear Wiper Arm

• 1 x Rear Wiper Blade

Why You Will Love It

You will love how easy it is to restore your rear visibility without visiting a mechanic. This complete set takes the guesswork out of finding the right part. It is a simple, cost-effective way to keep your MG safe and road-ready.

Questions and Answers

Question: Will this fit my 2019 MG ZS EV?

Answer: Yes, this rear wiper arm and blade set fits the MG ZS EV, ZSEV, and EZS models from 2017 to 2023, including the 2019 version.

Question: Does this include both the arm and the blade?

Answer: Yes, the package includes one rear wiper arm and one rear wiper blade.

Question: Is this a genuine MG part?

Answer: This is an aftermarket replacement part, not a genuine MG part. It is designed to match the OEM number 10387825 for a direct fit.

Question: What is the material of this wiper set?

Answer: It is made from plastic, metal, and rubber for durability and effective wiping.

Question: How do I know if this will fit my car?

Answer: Please compare the part number 10387825 with your original part before purchasing. This set is designed for the rear placement on MG ZS EV, ZSEV, and EZS models from 2017 to 2023.

This rear wiper blade and arm assembly is a direct replacement for the BMW X5 E70 models built between 2007 and 2013. It provides a clear view through the back windshield by restoring full contact and wiping performance.

Made from durable plastic, this wiper unit is designed to match the original factory fit and function. It replaces OEM part numbers 61627161029, 61627206357, and 42745, ensuring a simple swap without modifications.

Over time, rear wiper arms can wear out or become stiff, leaving streaks and blind spots. This replacement assembly brings back reliable wiping action, helping you maintain safe rear visibility in rain, snow, or road spray.

The complete design includes both the blade and the arm, making installation straightforward. You get the full assembly needed for the rear windshield in one package.

Key Features and Benefits

- Direct fit for BMW X5 E70 2007-2013 that eliminates the need for adapters or modifications

• Complete blade and arm assembly that replaces worn factory parts in one step

• Plastic construction that resists rust and corrosion for longer service life

• Restored rear windshield wiping that improves visibility and driving safety

• Replaces OEM numbers 61627161029, 61627206357, and 42745 for guaranteed compatibility

Who Is This For

- BMW X5 E70 owners from 2007 to 2013 needing a rear wiper replacement

• Drivers experiencing streaking, skipping, or incomplete rear windshield wiping

• DIY car owners looking for a direct-fit rear wiper arm and blade assembly

• Anyone restoring rear visibility on an X5 E70 before winter or rainy season

Usage Scenario

Mark noticed his 2011 X5 E70 had a rear wiper that left a wide streak right across the center of the glass. Every time it rained, he had to rely on his side mirrors more than he wanted. He ordered this replacement assembly, removed the old arm, and installed the new one in about ten minutes. Now the back windshield clears completely with every swipe, and he drives with more confidence in wet weather.

Micro Comparison

Some universal rear wipers need extra adapters or may not sit flush against the glass, causing uneven pressure. This assembly is molded specifically for the X5 E70 rear hatch contour, so the blade applies even contact across the full arc. You get a factory-like fit without guessing which adapter to use.

Specifications

- Material: Plastic

• Placement: REAR

• Compatible Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013

• OEM Numbers: 61627161029, 61627206357, 42745

Package Includes

- 1 x Rear Wiper Blade and Arm Assembly

Why You Will Love It

You get a complete rear wiper solution that fits your X5 E70 without extra parts or guesswork. It brings back the clean sweep you expect from a properly working wiper, so you can focus on the road ahead. One simple installation gives you years of reliable rear visibility.

Questions and Answers

Question: Will this fit my 2009 BMW X5 E70?

Answer: Yes, this rear wiper assembly is designed for BMW X5 E70 models from 2007 to 2013, including the 2009 model year.

Question: Is this just the blade or the arm too?

Answer: This is a complete assembly that includes both the rear wiper blade and the wiper arm.

Question: Do I need any special tools to install it?

Answer: No special tools are required. The arm attaches directly to the wiper spindle using the standard factory connection.

Question: What OEM part numbers does this replace?

Answer: This assembly replaces OEM numbers 61627161029, 61627206357, and 42745.

Question: Is the material metal or plastic?

Answer: The wiper arm and blade assembly is made from plastic.