Key Features

• Remote Control Use — It is intended for vehicles and remote control toys.
• 1/10 Scale Cars — It is for 1/10 scale off-road RC cars such as buggy and monster truck types.

Product Specifications

• Material: Metal
• Piece Count: 2pcs/lot
• Scale: 1/10
• Intended Use: Vehicles & Remote Control Toys
• Age Range: 14+y

What It Is / How It Works

This universal joint cup is a metal drive part for remote control vehicles, and the pack has 2 pieces. Universal joint cups are small couplings used in the drive line of RC cars and trucks.

Who It's For / Use Cases

Universal joint cups suit RC hobbyists who maintain or repair 1/10 scale off-road cars and trucks. They fit people who prefer metal drive parts and want a spare on hand for a small fleet of remote control vehicles that share the same drive line.

How to Use / Care

1. Use it to fit the universal joint cup on a compatible HSP 1/10 RC car.

How to Choose

Start with scale: this part is for 1/10 scale RC cars, so match it to a 1/10 chassis before you buy. Next, match it to the car types it is for, which are 1/10 off-road buggy and monster truck models. Choose the pack that suits how many cups you need, since the pack has 2 pieces.

Frequently Asked Questions

What is it made of?
It is made of metal.

How many pieces come in a pack?
The pack has 2 pieces, sold as 2pcs/lot.

What is it intended for?
It is intended for vehicles and remote control toys, and it is for 1/10 scale off-road RC cars such as buggy and monster truck types.

Does it need a battery?
It has no battery or power source, and batteries are not included.

What age range is it for?
The age range is 14+y, and the brand is VWINRC.

Key Features

• Metal Reducer Gears — The reducer uses all-metal gears with 45# steel reduction shafts.
• Metal Axle Gears — The gears inside the axle housing are made of metal, and the CVD metal ball joint semi-shaft is metal as well.
• Rubber-Cover Bearings — The drivetrain uses high-precision rubber-cover bearings and a steel central CVD.

Product Specifications

• Model: EX86170 EX86020
• Scale: 1/10
• Tooth count: 20T
• Material: Metal
• Intended use: Vehicles & Remote Control Toys
• Age Range: 14+y
• Part number: R86674

What It Is / How It Works

This RGT Spare Parts R86674 Gear(20T) is a 20-tooth replacement gear for 1/10 scale RC electric remote control off-road vehicles.

Who It's For / Use Cases

Hobbyists who run scale RC crawlers often need to replace drivetrain parts after regular use. This gear suits owners of the listed RGT crawler models who want a like-for-like replacement for a worn or damaged gear.

How to Use / Care

1. Keep the reducer's all-metal gears and 45# steel reduction shafts in place when you run the vehicle.
2. Keep the CVD metal ball joint semi-shafts and the impact resistant nylon caster hub and steering mount in the vehicle.
3. Choose a bodyshell colour from the three options: yellow, green or red.

How to Choose

Start with the model numbers. It is for the RGT EX86170 and EX86020 1/10 scale vehicles, so match those model numbers to your vehicle.

Match the tooth count and part number to the gear you are replacing before you order.

Frequently Asked Questions

Which vehicles is it for?
It is for the RGT EX86170 and EX86020 1/10 RC vehicles. The Model row in Product Specifications lists these numbers.

Are batteries included?
No, batteries are not included, and the part has no battery of its own.

How many teeth does the gear have?
It is a 20-tooth gear, listed in the title as Gear(20T) with part number R86674.

What are the reduction shafts made of?
The reducer uses 45# steel reduction shafts together with all-metal gears.

What scale is the gear for?
It is a 1/10 scale part for RC electric remote control off-road vehicles.

Key Features

• Metal Construction — The dampers are made of metal, so the parts are built from a solid material.
• Four-Piece Pack — The pack contains four pieces for the RC car upgrade.
• Mounting Accessories Set — One mounting accessories set is included with the metal dampers.

Product Specifications

• Material: Metal
• Piece Count: 4pcs
• Dimensions: 62 mm (2.44 in)
• Designed For: WPL C14 C24 C34 MN D90 D91 D96 D99 D99S MN90 MN98 MN99S RC Car
• Included: 1 mounting accessories set

What It Is / How It Works

These metal shock absorber dampers are RC car upgrade parts sold as a pack of four pieces. The parts are made of metal.

Shock absorber dampers are suspension parts that help control how an RC car's wheels move over uneven ground.

Who It's For / Use Cases

Hobbyists who maintain or upgrade WPL and MN series RC cars are the usual buyers for this kind of part. Owners of the models named in the Designed For row can check that row in Product Specifications before ordering. Shoppers who want replacement or upgrade damping parts for an RC car will find this set suited to that job.

How to Use / Care

1. Use these metal shock absorber dampers to upgrade the shock absorbers on your RC car.

How to Choose

Start by checking the Designed For row in Product Specifications against the RC car you own. Material is the other axis to weigh: these are metal parts, so choose them when a metal damper is the part you want. Look at the listed dimensions too, and compare them with the part you are replacing before ordering.

Frequently Asked Questions

What material are the dampers made of?
The dampers are made of metal. The pack holds four pieces.

How many pieces are in the pack?
The pack contains four pieces (4pcs), so you get four dampers per order.

Which RC cars are these designed for?
The Designed For row in Product Specifications lists the WPL and MN models these dampers are for. Check your car against that row before ordering.

Are batteries included?
No. The set does not use a battery, and batteries are not included.

What size are the dampers?
The listed size is 62 mm (2.44 in), so compare it with the part you are replacing before you order.

Key Features

• Single Servo Arm — The package includes only one 25T servo arm. The servo is not included.
• Four Color Options — You can choose black, red, blue, or silver.

Product Specifications

• Model: 25T Steering Servo Arm
• Material: Aluminum Alloy
• Color: Black, Red, Blue, or silver as your choice
• Size: 25T
• Pack Count: 1PCS

What It Is / How It Works

Steering servo arms are the metal levers fitted to the output shaft of a radio-control servo. They connect the servo to the steering linkage, so the servo's movement turns the front wheels or steering axle of an RC car. Replacement arms of this kind come in different materials and sizes, so the arm is matched to the servo it will drive.

Who It's For / Use Cases

Steering servo arms suit RC hobbyists who run cars or crawlers and need a replacement or upgrade for the steering servo arm. Builders who want a spare arm on hand for a servo already in use will find a single-piece pack suits that purpose.

How to Use / Care

1. Use it as the steering servo arm for an RC car or crawler, fitted to a servo you already have.
2. The servo is not included, so the arm needs a servo of your own before it can be used.

How to Choose

The servo's output shaft has to match that size before the arm will sit correctly on it. Next, choose the color you want, as the arm comes in black, red, blue, or silver. The arm is made of aluminum alloy, so match the material to the look and build you want for your RC car.

Frequently Asked Questions

What is in the package?
The package includes only one 25T servo arm. The servo is not included.

Does it need a battery?
No battery is needed for the arm itself, since it is a mechanical part. The servo that drives it must be supplied separately.

What material is it made of?
It is made of aluminum alloy.

Which colors can I get?
You can choose black, red, blue, or silver.

Who is it for?
It is for RC cars.

Key Features

• Spring Options — The spring comes in a black standard model and a silver complimentary model. Both are 45mm long, with a 0.5mm wire on the black spring and a 0.45mm wire on the silver one.
• Four-Piece Pack — The pack contains 4pcs.

Product Specifications

• Piece Count: 4pcs
• Material: Metal
• Designed For: MN78 MN168 MN99S(New Generation) MN300 MN-300 Tank 300
• Spring: Black standard model, 45mm total length, 0.5mm wire diameter; silver complimentary model, 45mm total length, 0.45mm wire diameter
• Oil: Not included; add your own oil
• Age Range: 14+y

What It Is / How It Works

These are metal oil shock absorber dampers, sold as RC car upgrade parts in a 4pcs pack.

The shock absorber does not include oil, so you add your own oil before fitting it.

Who It's For / Use Cases

RC car hobbyists who want to upgrade the damper section of a supported model will find these useful. They suit people who are comfortable filling a shock absorber with oil and fitting upgrade parts on their own, since the oil is not supplied.

How to Use / Care

1. Add your own oil to the shock absorber before use, since oil is not included.
2. Use it to upgrade the shock absorbers on a supported RC car model.

How to Choose

Start by checking the Designed For line in Product Specifications against your RC car model.

Frequently Asked Questions

Does it include oil?
No. The shock absorber does not include oil, so you add your own.

Which models is it designed for?
It is designed for the MN78, MN168, MN99S (New Generation), MN300, MN-300 and Tank 300.

What are the spring options?
The black standard spring is 45mm long with a 0.5mm wire diameter. The silver complimentary spring is 45mm long with a 0.45mm wire diameter.

How many pieces are in the pack?
The pack contains 4pcs.

What is it made of?
It is made of metal.

SPECIFICATIONS

Brand Name: NONE

For Vehicle Type: Cars

High-concerned chemical: none

Is Batteries Included: No

Is Electric: No battery

Is it battery/power supply: N

Is it charger/adapter: N

Material: Metal

Origin: Mainland China

Recommend Age: 14+y

Use: Vehicles & Remote Control Toys

Key Features

• Brass Construction — The gear set is made of brass.
• Metal Synchronizer — It is a metal synchronizer gear set for the gearbox.
• 1/14 Tamiya Fit — It suits 1/14 RC Tamiya tractor-series trucks.
• Realistic Model Detail — It is made to make a 1/14 model more realistic.

Product Specifications

• Material: Brass
• Color: Silver and Gold
• Piece Count: 1 set
• Scale: 1/14
• Age Range: 14+y

What It Is / How It Works

This RC truck metal brass gearbox gear set is a set of gears for the transmission of a 1/14 scale model truck. Gearbox gears sit inside the transmission housing and carry drive between the motor and the wheels. The set is made of brass and comes as one set per pack.

Who It's For / Use Cases

Gearbox gear sets like this suit RC hobbyists who build, repair or upgrade 1/14 scale Tamiya-style trucks. They suit modellers who want the internal gearing of a truck model to look and feel more like the full-size vehicle.

How to Use / Care

1. Use it to upgrade the gearbox gears of a 1/14 RC truck.

How to Choose

Start with the scale and model. The set is for 1/14 RC Tamiya tractor-series trucks, so check that your truck is in that scale before buying. Next, consider material. Brass gears are the material this set is made of, which suits buyers who want a metal gearbox part for a 1/14 truck build.

Frequently Asked Questions

What scale is it for?
It suits 1/14 RC Tamiya tractor-series trucks.

What is it made of?
The gear set is made of brass. It is a metal synchronizer gear set for the gearbox.

Does it need a battery?
No. It has no battery and no power source of its own.

How many pieces are in a pack?
One pack contains 1 set of gears.

What colour is it?
The gear set is silver and gold.

Key Features

• Brushed Metal-Gear Motor — It is a brushed motor with metal gear for RC car crawler trucks.
• Piece Count — One piece per pack.
• Vehicle and RC Toy Use — It is intended for vehicles and remote control toys.

Product Specifications

• Model: 280
• Scale: 1/12
• Material: Metal
• Piece Count: 1 pcs
• Intended Use: Vehicles & Remote Control Toys
• Power: No battery

What It Is / How It Works

This NEEBRC brushed motor with metal gear is a replacement motor for 1/12 RC car crawler trucks.

Replacement motors of this kind are sold as spare parts for hobby RC crawler trucks, so they are used to restore or upgrade the drive system of an existing model.

Who It's For / Use Cases

Hobbyists who maintain or repair RC crawler trucks often look for a replacement motor that matches their vehicle. This kind of spare part suits owners who want to swap out a worn motor rather than replace the whole truck.

How to Use / Care

1. Use it as a replacement motor for a 1/12 RC car crawler truck.

How to Choose

Choose a replacement motor by the vehicle type it is meant for, such as RC cars or crawler trucks, and by the scale listed for your model. Compare the intended use and the listed material against the chassis you are repairing before you buy.

Frequently Asked Questions

Does it need batteries?
It has no battery, and batteries are not included.

Does it carry a certification mark?
It carries the CE mark.

Is the motor made of metal?
The product is made of metal, and the brushed motor has metal gear.

Key Features

• Metal Build — It is made of metal, suited to simulation-style RC truck suspension.
• One Pair Per Pack — Each pack holds one pair of springs.

Product Specifications

• Material: Metal
• Scale: 1/14
• Color: Black
• Piece Count: 1 pair
• Age Range: 14+y

What It Is / How It Works

This metal suspension spring is an accessory for RC truck chassis. It is sold as one pair per pack and is made for the Tamiya 770S in 1/14 scale.

Who It's For / Use Cases

Suspension springs of this kind suit hobbyists who maintain or customise a scale RC truck and want a metal replacement part for the suspension. They also fit into the routine of owners who like to rebuild a chassis piece by piece, since each spring is a separate, simple component to swap.

How to Use / Care

1. Use it to replace or upgrade a front or rear suspension spring on an RC truck.

How to Choose

Start with scale: this spring is for a 1/14 scale RC truck, so match that to your model before you buy. Next, check the model row in Product Specifications and pick a spring for the vehicle you run.

Metal construction suits a metal-look suspension setup, and each pack holds one pair. Choose a pack size that matches the number of springs your build needs.

Frequently Asked Questions

What scale is this spring for?
It is for a 1/14 scale RC truck.

Which model is it made for?
It is made for the Tamiya 770S.

What is it made of?
It is made of metal.

How many come in a pack?
Each pack holds one pair.

Does it need batteries?
No batteries are included, and the spring has no battery power.

Key Features

• Aluminum Alloy Build — It is made of aluminum alloy, a metal material.
• 37mm Length — It measures about 37mm (1.46 in) long.
• 1/10 Scale Vehicles — It is made for 1/10 RC model cars and remote control toys.

Product Specifications

• Material: Aluminum Alloy
• Dimensions: 37 mm (1.46 in)
• Scale: 1/10
• Intended Use: Vehicles & Remote Control Toys
• Piece Count: 1pcs/10pcs Optional
• Age Range: 14+y

What It Is / How It Works

This is a servo arm extension servo horn, a metal part for radio control vehicles. It is made of aluminum alloy. Servo horns are the arm pieces that attach to a servo and pass its motion to the linkage. An extension adds reach, so the linkage can attach farther from the servo shaft.

Who It's For / Use Cases

Radio control hobbyists who build, tune or repair scale crawlers and model cars often look for servo arm extensions when a linkage needs more reach. It also suits hobbyists who keep spare servo horn parts on hand for their fleet of remote control vehicles.

How to Use / Care

1. Use it to extend a servo arm on a 1/10 RC model car.

How to Choose

Start with the length, because the extension has to reach the linkage point on your build. Confirm that the servo horn fits your servo spline before you install it.

Frequently Asked Questions

What is the extension made of?
It is made of aluminum alloy, a metal material.

How long is it?
It measures about 37mm (1.46 in) in length.

How many come in a pack?
The piece count is 1pcs/10pcs Optional, so you can order one piece or ten pieces.

Does it need a battery?
It has no battery or power supply. It is a mechanical metal part for the servo linkage.

What vehicles is it for?
It is made for 1/10 RC model cars and remote control toys, as listed under Intended Use in the specifications.

Key Features

• Metal Construction — The set is made of metal, a common material for rear axle and mount parts on RC cars.
• One-Piece Set — The set contains one piece in total, so one unit covers the bracket set.
• 1/12 Scale Design — It is designed for MN82 and LC79 1/12 scale RC cars.
• Replacement Part Use — It is designed to replace the matching part on these 1/12 scale RC cars, so it suits swapping out an original rear axle component.

Product Specifications

• Material: Metal
• Piece Count: 1 pcs
• Designed For: MN82 LC79 1/12 RC Car
• Scale: 1/12
• Weight: 23 g (0.81 oz)
• Age Range: 14+y

What It Is / How It Works

This metal bracket set is a rear axle part for 1/12 scale RC cars, supplied as one piece. It covers shock absorber leaf springs and a fixed seat mount bracket, and it weighs 23 g (0.81 oz).

Who It's For / Use Cases

Owners maintaining a compatible build can use a single set in place of a worn or missing rear axle part.

How to Use / Care

1. Use it as a replacement or upgrade part for the rear axle area of a matching 1/12 scale RC car.

How to Choose

Start with the model. Match the set to your MN82 or LC79 1/12 RC car, since the part is designed for that scale and model.

Next, consider the material. The set is made of metal, which suits the rear axle and mount role it covers.

Finally, check the quantity you need. The set contains one piece in total.

Frequently Asked Questions

What material is the set made of?
The set is made of metal, a material used for RC car suspension and mount parts.

How many pieces come in the set?
The set contains one piece in total, so the count matches a single rear axle bracket set.

Which RC cars is it designed for?
It is designed for MN82 and LC79 1/12 scale RC cars.

How much does it weigh?
It weighs 23 g (0.81 oz).

Does it need batteries?
No. Batteries are not included, and the set has no battery or power supply.

SPECIFICATIONS

Brand Name: SCLMRC

Certification: NONE

For Vehicle Type: Airplanes

Four-wheel Drive Attributes: Assemblage

High-concerned chemical: none

Is Batteries Included: No

Is Electric: No battery

Is it battery/power supply: N

Is it charger/adapter: N

Material: A

Model Number: RC

Origin: Mainland China

RC Parts & Accs: Landing Gear

Recommend Age: 14+y

Remote Control Peripherals/Devices: Servos

Technical parameters: Value 6

Tool Supplies: Assembled class

Upgrade Parts/Accessories: Frame

Use: Vehicles & Remote Control Toys

Key Features

• Stainless Steel Build — It is made of 304 stainless steel.
• Motor Size Range — It is sized for 370, 380 and 390 motors in the small size, 545, 550 and 555 motors in the middle size, and 775 and 755 motors in the big size.
• Planetary Gearbox Limit — It is not suitable for planetary gearbox installation, because the hole spacing is incorrect.
• One Piece Per Pack — The pack holds one mount base.

Product Specifications

• Material: 304 Stainless Steel
• Piece Count: 1pc
• Motor Size Class: Small, Middle, Big
• Power: No battery

What It Is / How It Works

This motor mount base is a support bracket that holds a motor in a fixed seat. Motor mount bases are used in model builds to keep a drive motor steady. It is made of 304 stainless steel.

Who It's For / Use Cases

RC boat and car builders who need a fixed seat for a drive motor are the people this kind of bracket suits. Hobbyists who swap motors between builds may find it useful, because each size class is sized for a separate group of motors.

How to Use / Care

1. Use it as a fixed seat that holds a motor in an RC boat or car build.
2. Pick the motor size class listed in the specifications: small, middle or big.
3. Do not fit it to a planetary gearbox motor, because the hole spacing does not match.

How to Choose

Start with the motor size class, since each class is sized for a different group of motors. Compare your motor with the sizes listed in the specifications before you buy. Stainless steel is the material to look for if you want a metal motor seat, and this bracket is made of it.

Frequently Asked Questions

What motor sizes is it sized for?
It is sized for 370, 380 and 390 motors in the small size, 545, 550 and 555 motors in the middle size, and 775 and 755 motors in the big size.

Can it be used with a planetary gearbox motor?
No. It is not suitable for planetary gearbox installation, because the hole spacing is incorrect.

What is it made of?
It is made of 304 stainless steel.

Does it need a battery?
No. The power listing shows no battery, so it is a purely mechanical bracket.

How many pieces come in a pack?
The pack holds one mount base.

Key Features

• Brass Construction — The body is made from H59 brass with a brass seamless mirror tube.
• Pressure Rating — It is rated below 3Mpa, with a maximum pressure of 4Mpa.
• Heat-Resistant Oil Seal — The oil seal offers high temperature resistance and wear resistance.
• Compact Outer Diameter — It has a 10mm outer diameter, which suits small-scale hydraulic builds.
• 3mm Link Hole — The link hole has an inner diameter of 3mm for attaching linkage.

Product Specifications

• Material: H59 brass + brass seamless mirror tube
• Outer Diameter: 10mm
• Stroke: 14/20/30/45/60/80/100mm
• Scale: 1/16, 1/18, 1/24
• Strength: Below 3Mpa, maximum pressure 4Mpa
• Cylinder Medium: No. 46 hydraulic oil
• Piece Count: 1 pcs
• Age Range: 14+y

What It Is / How It Works

This small hydraulic cylinder is an RC model accessory built for hydraulic model setups. It comes in a 10mm outer diameter with stroke options from 14mm to 100mm, and it is made from brass.

Who It's For / Use Cases

Hydraulic cylinder accessories suit RC hobbyists who build, repair or upgrade hydraulic model vehicles and want a replacement or add-on cylinder for a scale hydraulic system. They also suit builders who prefer metal parts with an oil seal for hydraulic operation.

How to Use / Care

1. Use it as a small hydraulic cylinder in an RC hydraulic model build, with No. 46 hydraulic oil as the cylinder medium.

How to Choose

Start by matching the cylinder to your model's hydraulic layout. Compare the outer diameter, the stroke length and the link hole size against the parts already in your build so the cylinder fits the space and the linkage. Check the scale your model is built for, then pick the stroke that gives the travel your mechanism needs. Brass construction suits builders who want a metal cylinder body, while the oil seal rating matters if the system runs warm or sees steady wear.

Frequently Asked Questions

What material is it made of?
It is made from H59 brass with a brass seamless mirror tube.

Does it need a battery?
No. It has no battery and no power source, because it works as a hydraulic part.

What stroke lengths are available?
The stroke options are 14mm, 20mm, 30mm, 45mm, 60mm, 80mm and 100mm.

What hydraulic oil does it use?
It is designed for No. 46 hydraulic oil as the cylinder medium.

What pressure can it handle?
Its strength is rated below 3Mpa, with a maximum pressure of 4Mpa.

Key Features

• Four-Bracket Pack — Four shock absorber brackets are in the pack.
• Screws Set Included — A screws set is in the pack for mounting the brackets.
• Designed for MN Models — It is designed for the MN D90, D91, D99S, MN99 and MN99S 1/12 RC car.

Product Specifications

• Material: Metal
• Designed for: MN D90, D91, D99S, MN99, MN99S 1/12 RC car
• Scale: 1/12
• Package contents: 4 shock absorber brackets
• Screws set: 1
• Size: 15 × 10 × 10 cm (5.9 × 3.9 × 3.9 in)
• Color: Black

What It Is / How It Works

This metal shock tower bracket kit is an RC car part. It is sold as a set of four shock absorber brackets with a screws set, and it is designed for the MN D90, D91, D99S, MN99 and MN99S 1/12 RC car.

Who It's For / Use Cases

Bracket kits like this suit RC hobbyists who own a compatible MN series car and want to fit extra shock absorber brackets to the chassis. They suit owners who prefer a metal part with a screws set in the same pack, and who plan to fit the parts themselves.

How to Use / Care

1. Use it to fit shock absorber brackets to a compatible RC car.

How to Choose

Start with the car. Confirm that your RC model appears in the designed-for list in Product Specifications before you buy. Next, look at the piece count, since this pack has four brackets and one screws set. Metal construction suits owners who want a sturdier mounting part than plastic alternatives.

Frequently Asked Questions

Which RC cars is it designed for?
It is designed for the MN D90, D91, D99S, MN99 and MN99S 1/12 RC car.

What comes in the pack?
The pack has four shock absorber brackets and one screws set.

What is it made of?
It is made of metal.

Does it need batteries?
No. It has no battery and is not an electric part.

What colour is it?
It is black.

Key Features

• Plastic Build — It is made of plastic for RC car parts.
• Built for 1/10 Scale — It is made for 1/10 scale RC car builds.
• Gasket for Car Shell — It works as a gasket for the RC car shell.

Product Specifications

• Material: Plastic
• Plastic Type: ABS
• Scale: 1/10
• Age Range: 14+y

What It Is / How It Works

This plastic bracket spacer is a gasket-type part for 1/10 scale RC car builds. It is made of plastic, and the plastic type is ABS.

Who It's For / Use Cases

Hobbyists who build, rebuild or repair 1/10 scale RC cars often need small spacer and gasket parts during chassis and body assembly. Plastic spacers and brackets like this suit people who want to fill a gap or fit a shell column neatly on a scale RC car.

How to Use / Care

1. Use it as a spacer or gasket part on a 1/10 scale RC car.

How to Choose

Choose a spacer or bracket part that matches your car's scale, since this one is made for 1/10 scale RC car builds. Check the material too: plastic parts suit light-duty spacing and gasket roles, while the part's role on your car decides which size and shape fit best.

Frequently Asked Questions

Is this part made for 1/10 scale RC cars?
It is made for 1/10 scale RC car builds.

What is it made of?
It is made of plastic, and the plastic type is ABS.

Does it need a battery?
No. It has no battery, and batteries are not included.

Who is the brand?
The brand is SCLMRC.

Is it for cars?
It is for cars, and it suits 1/10 scale RC car builds.

Key Features

• Metal Construction — The arm part is made of metal, the material this gear is built from.
• Fan-Shaped Cone Design — The digging arm uses a large fan-shaped cone that shapes the gear segment.
• 1/14 Scale Fit — It is designed for 1/14 scale RC excavators.

Product Specifications

• Material: Metal
• Scale: 1/14
• Piece Count: 1 pcs
• Age Range: 14+y

What It Is / How It Works

This metal sector gear is a digging arm part for a 1/14 scale RC excavator. In RC excavators, a sector gear is a fan-shaped gear segment that meshes with a drive pinion to move the arm through its range.

Who It's For / Use Cases

Builders who prefer metal drivetrain parts in their models may also consider a metal gear segment for a sturdier arm assembly.

How to Use / Care

1. Use it as a replacement or upgrade sector gear on a 1/14 scale RC excavator.

How to Choose

Start by confirming that your excavator is a 1/14 scale model, since this part is sized for that scale. Next, decide whether you need a metal gear segment, because this part is made of metal. Finally, check that the arm design matches your model, since this part has a large fan-shaped cone for the digging arm.

Frequently Asked Questions

What scale is this part designed for?
It is designed for 1/14 scale RC excavators. The part is a sector gear for the digging arm.

What material is it made of?
It is made of metal. The gear is a metal sector gear with a fan-shaped cone for the digging arm.

How many pieces come in one order?
Each pack contains one piece. The brand is MOTIVE-RC.

Does it need a battery or power supply?
No. It has no battery or power supply, so it is a mechanical gear part.

What age range is it recommended for?
The recommended age range is 14 and up. It is a metal gear part for RC excavator builders in that range.

Key Features

• Plastic Body — This part is made from plastic, the material on record for this RC excavator model component.
• PC Plastic Type — The plastic type is PC, a polycarbonate grade.
• Batteries Not Included — Batteries are not included, and the part has no battery of its own.
• Connector and Wiring Parts — It sits in the RC parts category for connectors and wiring accessories.

Product Specifications

• Model: HUINA 1592 Parts
• Material: Plastic
• Plastic Type: PC
• Piece Count: 1 pcs
• Age Range: 14+y
• Intended Use: Vehicles & Remote Control Toys
• Power: No battery

What It Is / How It Works

This RC excavator model part is a plastic accessory for radio-controlled excavator toys, sold under the HUINA 1592 Parts model name. It falls in the vehicles and remote control toys category.

Who It's For / Use Cases

Radio-controlled excavator hobbyists who build, repair, or upgrade model excavators often look for individual replacement or add-on parts. Modelers who collect or maintain RC construction vehicles may also use this type of component to complete a build.

How to Use / Care

1. Use the part as a replacement or add-on component for an RC excavator model, following the build or repair steps that apply to your model.

How to Choose

Start by matching the part name to the section of the excavator it belongs to, such as the arm, bucket, gripper, gearbox, or walking motor. Check the piece count and power needs, since this item has no battery and batteries are not included. Choose based on the part type you need for your build.

Frequently Asked Questions

Are batteries included?
No, batteries are not included, and the part has no power source of its own.

What material is it made from?
It is made from plastic, and the plastic type is PC, a polycarbonate grade.

How many pieces come in one order?
Each listing is for 1 piece.

What age range is it for?
The age range is 14 years and up.

What vehicle type is it for?
The vehicle type is listed for cars, and the intended use is vehicles and remote control toys.

Key Features

• 15-Tooth Pinion — It has 15 teeth and an 8mm inner hole for the rotary motor of an RC excavator.
• 93-Tooth Ring Gear — It has 93 teeth, a 104mm outer diameter and 13mm thickness, and it is used to make the ring gear of an excavator turntable.

Product Specifications

• Material: Steel
• Piece Count: 1 pcs
• Scale: 1/12
• Inner Hole: 8mm
• Teeth (Pinion): 15
• Teeth (Ring Gear): 93
• Outer Diameter: 104mm
• Thickness: 13mm

What It Is / How It Works

This internal ring gear is a steel gear part for a 1/12 RC hydraulic excavator's rotary system. It is the rotary motor pinion internal ring gear, used where the excavator's turntable is driven by a rotary motor.

Who It's For / Use Cases

Gear parts like this suit RC hobbyists who build or repair a 1/12 scale hydraulic excavator. They suit modelers who want to match the inner hole, tooth count and outer size of the original gear during a rebuild, and who are comfortable fitting a metal gear into a rotary motor assembly.

How to Use / Care

1. Fit the 8mm inner hole onto the rotary motor of your RC excavator.
2. Use it to make the ring gear of an excavator turntable, using the 93-tooth, 104mm outer diameter gear.

How to Choose

Check the 8mm inner hole, 104mm outer diameter and 13mm thickness against the part you are replacing or building around. It is made for 1/12 scale excavators, so choose it for that scale.

Frequently Asked Questions

Does it need a battery?
No. It has no battery or power supply, and batteries are not included.

What material is it made of?
It is made of steel.

What scale is it for?
It is made for 1/12 RC hydraulic excavators.

How many pieces come in the pack?
The pack has 1 piece.

What are the inner hole and outer size?
The inner hole is 8mm. The outer diameter is 104mm and the thickness is 13mm.

Key Features

• 24-Inch Circumference — The belt measures 610 mm (24 in) around.

Product Specifications

• Model: 240J PJ610
• Material: Rubber
• Circumference: 610 mm (24 in)
• Piece Count: 1 pcs
• Rib Options: 3/4/5/6/7/8 Ribs

What It Is / How It Works

This rubber V-belt is a transmission timing belt for RC model motors. It is supplied as one piece with a circumference of 610 mm (24 in).

Who It's For / Use Cases

Transmission belts like this suit hobbyists who maintain or rebuild RC model motor drives and need a replacement belt of a set length. Model builders who keep a spare belt on hand for an RC motor setup are another typical group, since transmission belts wear over time.

How to Use / Care

1. Use it as a transmission timing belt in an RC model motor drive.

How to Choose

Start by matching the belt circumference to the drive, since belts are sized by their length. The rib count is another choice point, and this belt is offered in 3, 4, 5, 6, 7 or 8 ribs, so pick the count that suits your motor setup.

Frequently Asked Questions

What material is the belt made of?
It is made of rubber, and each pack contains one piece.

What is the belt circumference?
The belt measures 610 mm (24 in) around.

How many ribs does it have?
The model is offered in 3, 4, 5, 6, 7 or 8 ribs, so choose the rib count that matches your drive.

Does it need batteries?
No. It is a rubber belt with no battery or power supply.

Who makes it?
The brand is MOTIVE-RC, and the model number is 240J PJ610.

Key Features

• Stainless Steel Build — It is made of stainless steel, so the clamp is metal rather than plastic.
• 3mm Hose Size — It is sized for a 3mm pipe or hose, with a dimension of 3 mm (0.12 in).
• 4mm Hose Size — It is sized for a 4mm pipe or hose, with a dimension of 4 mm (0.16 in).
• Hydraulic Oil Hose Fit — It suits a 4mm hydraulic oil pipe hose with a fixed outer diameter.

Product Specifications

• Material: Stainless steel
• Model: Hose Hoop
• Piece Count: 1 pcs

What It Is / How It Works

This is a stainless steel pipe clamp hose hoop for 1:14 RC excavator model accessories. It is a small metal clamp that holds a 3mm or 4mm hose in place on the model.

Who It's For / Use Cases

Hobbyists who build or upgrade 1:14 RC excavator models often need small clamps to secure hydraulic hoses along the arm and boom. Builders who want a metal hose hoop for a 3mm or 4mm line will find this type of clamp useful for keeping tubing neat and in position.

How to Wear / Care

1. Use it to clamp a 3mm or 4mm hose on a 1:14 RC excavator model.

How to Choose

Start with the hose outer diameter. Choose the 3mm size for a 3mm hose and the 4mm size for a 4mm hose, since each clamp is sized to one of those diameters. Match the clamp to your 1:14 RC excavator model so it sits where the hose needs support.

Frequently Asked Questions

Does it need a battery or power supply?
No. It has no battery and no power supply, so it is a passive metal clamp.

Which RC model is it for?
It is for a 1:14 RC excavator model.

What hose sizes does it fit?
It is sized for 3mm and 4mm hoses, with dimensions of 3 mm (0.12 in) and 4 mm (0.16 in).

What is it made of?
It is made of stainless steel.

How many pieces are in a pack?
One piece per pack.

SPECIFICATIONS

Brand Name: MOTIVE-RC

For Vehicle Type: Cars

Four-wheel Drive Attributes: Assemblage

High-concerned chemical: none

Is Electric: No battery

Is it battery/power supply: N

Is it charger/adapter: N

Material: Plastic

Model Number: DasMikro 1.7g Micro Servo

Origin: Mainland China

Plastic Type: PE

Quantity: 1 pcs

RC Parts & Accs: Servos

Recommend Age: 14+y

Remote Control Peripherals/Devices: Servos

Size: 14*6.2*17.9mm

Technical parameters: value 2

Tool Supplies: Assembled class

Use: Vehicles & Remote Control Toys

New DasMikro 1.7g Micro Servo With Arm Parts 1/87 Parts for Mini 4WD RC Car Parts

Key Features

• Aluminum Metal Build — The aluminum metal is built for longer life and is wear-resistant.
• Wide Thick Teeth — The wide, thick gear teeth sit in deep grooves, so they can take more force without the teeth being easily stripped.
• M3 Set Screws — Each pinion gear has an M3 set screw (12.9 level) added.
• 1/10 Scale Motors — It is suitable for 1/10 RC car truck brushed and brushless motors.
• Five-Piece Gear Set — The set has 5 pieces, giving you more choice for your RC cars.

Product Specifications

• Piece Count: 5 pcs
• Scale: 1/10
• Pitch and module: 32DP 48DP 64DP M0.6
• Package Size: 3.175mm
• Material: Aluminum metal
• Part number: 12T-50T

What It Is / How It Works

This 5-piece aluminum pinion motor gear set is made for 1/10 scale RC cars. The pinion is designed for a 1/10 RC car motor and is built from aluminum metal.

A pinion is the small gear on a motor shaft that meshes with the larger spur gear, which passes the drive on to the wheels.

Who It's For / Use Cases

Pinion gear sets like this suit RC hobbyists who run 1/10 scale cars, trucks and buggies and want a choice of gears for their motor. Builders who already know the pitch of their spur gear can pick a matching pinion from the set.

How to Use / Care

1. Use the pinion gears on a 1/10 RC car motor, such as a truck or buggy brushed or brushless motor.
2. Check that the pitch of the pinion matches the spur gear it will mesh with before use.

How to Choose

Choose the diametral pitch first, because the pinion must match the spur gear it meshes with. A higher pitch number means finer, smaller teeth.

The listed tooth counts run from 12T to 22T across the pieces.

Fewer teeth on the pinion give a different gear ratio than more teeth, so compare the counts before you choose.

Frequently Asked Questions

Which pitches does the set cover?
The model line lists 32DP, 48DP and 64DP with M0.6, so match the pitch to your spur gear.

Is a screw set included?
One screw set is included, and each pinion gear already has an M3 set screw (12.9 level).

Does it need batteries?
Batteries are not included, since the set is a gear kit.

Which motors does it suit?
It suits 1/10 RC car truck motors, both brushed and brushless.

What tooth counts are in the set?
The listed tooth counts run from 12T to 22T across the pieces, so there is a range of gearing.

Key Features

• Rubber Construction — The belt is made of rubber, a flexible material that suits a drive belt running around pulleys.
• 373 mm Circumference — The belt has a circumference of 373 mm (14.7 in), so its loop length is fixed by the model.
• Choice of Rib Count — It is offered with 3, 4, 5, 6 or 7 ribs, so rib count is the main selection point.

Product Specifications

• Material: Rubber
• Circumference: 373 mm (14.7 in)
• Rib Count: 3, 4, 5, 6 or 7 ribs
• Piece Count: 1 pcs
• Power: No battery

What It Is / How It Works

This mini drive belt is a V-belt for RC model motor setups. It is a rubber belt that runs around pulleys to carry motion from a motor to a driven part.

Drive belts of this kind are used in small model drivetrains where a belt replaces gears to transfer rotation between shafts.

Who It's For / Use Cases

Hobbyists who run RC model motors and need a spare or replacement drive belt suit this type of part. Builders comparing belt lengths and rib counts for a pulley layout will find the circumference and rib options the main deciding details.

How to Use / Care

1. Use it as a drive belt on an RC model motor setup, running it around the pulleys it is sized for.

How to Choose

Start with the loop length your pulley layout needs, since the belt's circumference sets how it sits on the pulleys. Rubber drive belts of this type are chosen by fit first, so confirm the groove profile before comparing other details.

Frequently Asked Questions

What is the belt made of?
It is made of rubber, which gives it the flexibility a drive belt needs to run around pulleys.

Does it need a battery or power supply?
No. The belt has no battery and works as a mechanical drive part on the motor side of the model.

How long is the belt?
The circumference is 373 mm (14.7 in), which is the loop length to check against your pulley spacing.

How many ribs does it have?
It is offered with 3, 4, 5, 6 or 7 ribs. Choose the rib count that matches the grooves on your pulleys.

How many belts come in one order?
One piece per pack.

Key Features

• Rubber Construction — It is made of rubber and is used as a drive belt in a transmission.
• Fixed Loop Length — It measures 483 mm (19 in) around its loop.
• Rib Options — It is offered with 3, 4, 5, 6 or 7 ribs, so you can match the groove count on your pulleys.

Product Specifications

• Model: PJ483 190J
• Material: Rubber
• Circumference: 483 mm (19 in)
• Piece Count: 1 pcs
• Age Range: 14+y
• Power: No battery

What It Is / How It Works

This is a rubber V-belt for DIY RC motor transmissions. It is made of rubber and is offered with 3, 4, 5, 6 or 7 ribs.

Who It's For / Use Cases

V-belts of this kind suit hobbyists who build or maintain small drive systems, such as remote-control models with a motor and transmission. They suit people who need a spare belt with a specific loop length and rib count for a model they already own.

How to Use / Care

1. Use it to drive the transmission in a DIY RC motor setup.

How to Choose

Start with the drive layout you are building, since belt length and rib count together decide whether a belt suits your transmission. Compare the circumference in Product Specifications with the pulley path in your model, then pick the rib count that matches the grooves on your pulleys. Rubber V-belts of this type are chosen by loop length and rib profile first, so confirm both details before you buy.

Frequently Asked Questions

What is the belt made of?
It is made of rubber and is used as a drive belt in a transmission.

How long is the loop?
It measures 483 mm (19 in) around its loop.

How many belts come in a pack?
One piece comes in each pack.

Which rib counts are offered?
It is offered with 3, 4, 5, 6 or 7 ribs.

Does it need a battery?
No. It has no battery and no power supply of its own.

What age range does it have?
Its age range is 14+ years.

SPECIFICATIONS

Brand Name: E-Star Hub

For Vehicle Type: Cars

Four-wheel Drive Attributes: Assemblage

High-concerned chemical: none

Is Batteries Included: No

Is Electric: No battery

Is it battery/power supply: N

Is it charger/adapter: N

Material: Composite Material

Model Number: Link Rod

Origin: Mainland China

Quantity: 1 pcs

RC Parts & Accs: Servos

Recommend Age: 14+y

Remote Control Peripherals/Devices: Servos

Size: 15x10x10cm

Technical parameters: KV1100

Tool Supplies: Assembled class

Upgrade Parts/Accessories: Frame

Use: Vehicles & Remote Control Toys

Wheelbase: Screws

Key Features

• Stainless Steel Build — The fitting is made of stainless steel, which gives it high strength, resistance to breaking, and resistance to rust and corrosion.
• Angled Hose Connection — One end has an M3 thread and the other end fits a 3 mm outside diameter hose, with a 90º bend between them.
• Choice of Quantity — It is offered as 1, 2 or 4 pieces, so you can choose the quantity you need.

Product Specifications

• Model: Elbow M3-3mm
• Material: Stainless Steel
• Dimensions: 3 mm (0.12 in)
• Size: m3-3mm
• Piece Count: 1 pcs
• Age Range: 14+y

What It Is / How It Works

This is a 90º hose elbow connector made of stainless steel, with an M3 thread at one end and a 3 mm hose fitting at the other. Angled hose connectors of this kind are used to change the direction of a hose run where a straight fitting would not fit.

Who It's For / Use Cases

Hobbyists who build or repair RC hydraulic cylinder valve setups often need angled hose fittings to route tubing through tight spaces. Builders who prefer metal fittings for their strength and corrosion resistance may also find an elbow connector like this useful when a straight run does not fit the layout.

How to Use / Care

1. Use it to turn a hose run through an angled bend where a straight connector would not fit.

How to Choose

Start by matching the thread end to the port you are connecting to, then match the hose end to the outside diameter of the tubing you already use. Material matters too: stainless steel suits builds where strength and rust resistance are important. If your layout needs a bend, an elbow shape keeps the hose from running straight into the fitting.

Frequently Asked Questions

Does the 90º angle change the hose direction?
The elbow bends the line 90º, with an M3 thread on one end and a 3 mm outside diameter hose connection on the other.

What material is the connector made from?
The body is stainless steel, the material that gives it high strength and resistance to rust and corrosion.

Does it need a battery or power supply?
No. It has no battery and no power supply, so it is a plain metal fitting that joins a hose to a threaded port.

How many pieces come in one order?
The piece count is 1 pcs, and 2 or 4 piece options are also offered so you can pick the quantity you need.

Key Features

• Six Per Excavator — One RC excavator needs 6 limit switches.
• Arm Drive Upgrade — It is an upgrade limit switch for the arm driving servo.

Product Specifications

• Material: Plastic
• Plastic Type: PE
• Piece Count: 1 pcs
• Age Range: 14+y
• Scale: 1/14

What It Is / How It Works

A limit switch is a small switch part that marks the end of travel for a moving part, such as a servo arm.

It is an upgrade limit switch for the arm driving servo on a HUINA 1/14 RC metal excavator.

Who It's For / Use Cases

Limit switches like this suit hobbyists who run scale RC excavators and need a replacement part for the arm drive position limit. They suit builders who want the arm drive to stop at a set travel point, and people who repair an RC excavator and need a matching switch part.

How to Use / Care

1. Use it as the arm driving servo limit switch on the HUINA 1/14 RC metal excavator.

How to Choose

Check the scale of your excavator first, since this part is for a 1/14 RC excavator. Matching the scale before you order keeps the part suited to your model.

One RC excavator needs 6 limit switches, so count the switch positions on your build before ordering.

Frequently Asked Questions

Which excavator is it for?
It is for the arm driving servo on a HUINA 1/14 RC metal excavator.

What is it made of?
It is made of plastic, and the plastic type is PE.

How many do I need?
One RC excavator needs 6 limit switches, and this pack has 1 piece.

Does it need a battery?
No. It has no battery, so it needs no power supply.

What age range is it for?
The age range is 14+ years.

Key Features

• Metal Construction — The parts are made of metal, which suits the RC excavator upgrade role this kit is built for.

Product Specifications

• Material: Metal
• Piece Count: 1 pcs
• Age Range: 14+y

What It Is / How It Works

This is an upgrade kit for RC excavators, sold as a bucket ripper, winch and fork lift set for Huina 550/580/592/593/594 RC excavators. It is a metal upgrade kit rather than a complete excavator.

Who It's For / Use Cases

RC excavator hobbyists who build, rebuild or customize their models often look for metal upgrade parts that replace or add attachments. Builders who enjoy DIY work on Huina-style excavators tend to choose kits like this when they want to expand what their model can do.

How to Use / Care

1. Use it to add a bucket ripper, winch or fork lift attachment to a compatible Huina RC excavator.

How to Choose

Start by confirming that your RC excavator is one of the Huina 550, 580, 592, 593 or 594 models, since the kit is named for those. Next, decide which attachment you want to add, as the kit covers bucket ripper, winch and fork lift upgrades. Metal parts are a common choice for builders who want a heavier-feeling upgrade than plastic stock parts.

Frequently Asked Questions

What is the kit made of?
The parts are made of metal. The specifications list Metal as the material.

How many pieces come in a pack?
Each pack contains one piece, so the pack count is 1 pcs.

Does the kit need a battery?
No. The power listing is No battery, so it is a mechanical upgrade part.

Which RC excavators does it fit?
The kit is named for Huina 550/580/592/593/594 RC excavators. Confirm your model matches one of these numbers before ordering.

Is this a complete RC excavator?
This product is designed for specific models listed under Product Specifications → Compatible models. Confirm your exact model appears there before buying.

Key Features

• Aluminum Build — It is made of CNC aluminum, a metal.
• Tube Size Range — It suits tube arms of 16mm, 22mm, 25mm, 30mm, 35mm and 40mm.
• Up-Tilt Angle — It has a 5 degree up-tilt angle to help increase flying stability.
• Multirotor Use — It suits Auto Edition RC quadcopters, hexacopters and multicopters.
• One Piece Per Order — One piece is sent per order, in the size you choose.

Product Specifications

• Material: Metal (CNC aluminum)
• Tube diameter (D): 16mm, 22mm, 25mm, 30mm, 35mm, 40mm
• Size: Z16 Z22 Z25 Z30 Z35
• Compatible models: Automatic

What It Is / How It Works

This aluminum folding arm tube joint is a metal connector for drone arms. It is made of CNC aluminum and is sold as one piece per order, in the tube size you choose.

Who It's For / Use Cases

Hobbyists who build or repair multirotor drones often need a joint that holds folding arms in place. Folding arm joints suit anyone working on a quadcopter or multicopter frame who wants a metal connector for round tubes.

How to Use / Care

1. Use it as a folding arm tube joint on an RC quadcopter, hexacopter or multicopter.

How to Choose

Start with the outer diameter of your arm tubes and pick the matching size from 16mm, 22mm, 25mm, 30mm, 35mm or 40mm. The size is sent according to your choice, so confirm it matches your tubes before ordering. Aluminum is the material to look for if you want a metal joint.

Frequently Asked Questions

What tube sizes does it fit?
It suits tube arms of 16mm, 22mm, 25mm, 30mm, 35mm and 40mm. The size is sent according to the one you choose.

What is it made of?
It is made of CNC aluminum, which is a metal. The joint is cut to suit round tube arms.

Does it need a battery?
No. It has no battery, and batteries are not included.

Which drones does it suit?
It suits Auto Edition RC quadcopters, hexacopters and multicopters.

Why does the arm have an angle?
The joint has a 5 degree up-tilt angle, which is built in to help increase flying stability.