Key Features

• Locking Glove Box — Locking the glove box with the switch helps keep stored items safe and prevents the lid from opening by accident while driving.
• Keeps Items Contained — The glove box stays securely closed, so items do not scatter around the car interior.
• ABS Plastic Build — The latch knob is made of ABS plastic.
• Fits Kia Sportage — It is designed to fit Kia Sportage 2005-2010 models without modifications.

Product Specifications

• Color: Black or Beige
• Material: ABS
• Package Contents: 1 glove box latch knob

What It Is / How It Works

This is a car glove box lock latch handle, a glove box latch knob sold for Kia Sportage 2005-2010 vehicles. It is made for the glove box compartment and holds the lid closed, with a switch that locks it.

Who It's For / Use Cases

Drivers who want the glove box to stay shut while driving, and who want to keep loose items from spilling into the cabin, are the typical buyers for this kind of latch knob.

How to Use / Care

1. Use it to latch and lock the glove box compartment closed.

How to Choose

Start by confirming your vehicle is a Kia Sportage from 2005 to 2010, since that is the model range this part is designed for.

Frequently Asked Questions

Which vehicles is it designed for?
It is designed to fit Kia Sportage 2005-2010 models. Check that your model year falls within this range before ordering.

What is the knob made of?
It is made of ABS plastic and comes in Black or Beige.

What is included in the package?
One glove box latch knob. The part numbers are 84560-1F100EZ and 84560-1F100WK.

Does it need modifications to fit?
No modifications are required, since it is designed to fit the Kia Sportage 2005-2010 without changes to the vehicle.

Key Features

• Chevrolet Sonic Fit — It fits the Chevrolet Sonic for model years 2012 through 2020.
• Plastic Construction — The handle is made of plastic.

Product Specifications

• Material: Plastic
• Color: Black
• Compatible models: Chevrolet Sonic, model years 2012 through 2020; Chevrolet For Sonic 2012–2020
• Part number: 42389792

What It Is / How It Works

This is a glove box latch handle, a replacement part for the latch on a glove box door. It is made of plastic and comes in black.

Who It's For / Use Cases

Glove box latch handles suit car owners who need to replace a worn or broken latch on the glove box door. They are a practical choice for anyone who wants the glove compartment to open and close normally again without replacing the whole dashboard panel.

How to Use / Care

1. Use it as the passenger-side glove box latch handle for a Chevrolet Sonic from model year 2012 through 2020.

How to Choose

Start with the vehicle. Confirm that your car is a Chevrolet Sonic from model year 2012 through 2020 and that you need the passenger-side handle. Check the Compatible models row in Product Specifications for the listed years.

Frequently Asked Questions

Which vehicle is this for?
It fits the Chevrolet Sonic for model years 2012 through 2020.

What is the part number?
The OEM number is 42389792.

What is it made of and what color is it?
It is made of plastic and comes in black.

Who makes it?
The brand is RLB-HILON.

Key Features

• Replacement Switch Part — It is made to replace the glove compartment lid switch on Mercedes-Benz W164 GL and ML Class cars.
• Connector Without Splicing — It is described as having a correct connector, with no cutting or splicing needed to fit.

Product Specifications

• Material: ABS
• Dimensions: 3.7 cm ; 8.7 cm ; 4 cm
• Weight: 36 g (1.27 oz)
• Interchange Part Number: 1646800191
• Placement on Vehicle: Front
• Package Contents: 1 glove box switch
• Compatible models: Mercedes Benz W164 GL ML Class Toolbox

What It Is / How It Works

This is a replacement glove compartment lid switch cover, a small car interior part for the glove box lid on Mercedes-Benz W164 GL and ML Class models. Fitment is named for 2006-2011 glass models.

Who It's For / Use Cases

Car owners who need a replacement glove compartment lid switch will find this type of part suits a direct replacement job. Repair shops and parts buyers who stock replacement car interior switch covers can use this kind of item to fill a single-part need. The part suits anyone who wants a plastic replacement rather than a larger assembly.

How to Use / Care

1. Use it to replace the glove compartment lid switch on a Mercedes-Benz W164 GL or ML Class car.

How to Choose

Start with the vehicle: this part is named for W164 GL and ML Class models from 2006-2011, so confirm your car falls in that range before ordering. Next, compare the old switch cover against the dimensions of 3.7 cm (1.46 in), 8.7 cm (3.4 in) and 4 cm (1.57 in). A part that matches the vehicle and these measurements is the practical choice for a glove box lid switch swap.

Frequently Asked Questions

What is this part made of?
It is made of ABS plastic.

Which vehicles is it for?
It is made for the Mercedes-Benz W164 GL and ML Class, with fitment named for 2006-2011 glass models.

What comes in the package?
One glove box switch.

Does it need cutting or splicing?
It is described as having a correct connector with no cutting or splicing needed.

Key Features

• PP Plastic Build — It is made of PP plastic, the material listed for this lid handle.
• Mounting Hole Spacing — The mounting holes are about 3.4 cm (1.3 inch) apart, so measure your existing handle before ordering.
• Handle Dimensions — It measures about 8.6 x 6 x 3 cm (3.4 x 2.4 x 1.2 inch) (L x W x D).
• Suzuki Model Fit — It is made for the Suzuki SX4 and Swift, models RW415, RW416 and RW420, 2006-2012.

Product Specifications

• Compatible With: fit For SX4 Swift RW415 RW416 RW420 2006-2012
• Material: PP Plastic
• Color: Black
• Size: approx. 8.6x6x3cm (3.4x2.4x1.2inch) (LxWxD)
• Distance between Mounting holes: approx. 3.4cm (1.3inch)
• Item included: 1 x Car Glove Box Lid Handle
• Condition: New

What It Is / How It Works

This car glove box lid handle is a replacement handle for the lid of a glove box. It is made for the Suzuki SX4 and Swift, models RW415, RW416 and RW420, 2006-2012, and the package contains one handle.

Who It's For / Use Cases

Car owners with a Suzuki SX4 or Swift from 2006 to 2012 who need to replace a glove box lid handle will find this part useful. It suits anyone who wants a direct swap for a worn or broken handle on the glove box lid, and anyone who prefers a plain black plastic part for that spot.

How to Use / Care

1. Use it to replace the handle on the glove box lid of a compatible Suzuki SX4 or Swift.

How to Choose

Start with the vehicle. Check the Compatible With row in Product Specifications against your Suzuki SX4 or Swift model and year. Next, compare the mounting hole spacing of about 3.4 cm (1.3 inch) with your existing handle, and confirm the size of about 8.6 x 6 x 3 cm fits the space around the glove box lid.

Frequently Asked Questions

Which vehicles does it fit?
It is made for the Suzuki SX4 and Swift, models RW415, RW416 and RW420, 2006-2012. The Compatible With row in Product Specifications gives the same list.

What is it made of?
It is made of PP plastic and is black.

How far apart are the mounting holes?
The mounting holes are about 3.4 cm (1.3 inch) apart.

What size is the handle?
It measures about 8.6 x 6 x 3 cm (3.4 x 2.4 x 1.2 inch) (L x W x D).

What does the package include?
The package includes one car glove box lid handle.

Key Features

• ABS Construction — It is made of ABS, which makes the handle solid and long-lasting.
• Direct Replacement — It is a direct replacement that needs no drilling or cutting.
• Worn Part Replacement — It is designed to replace an old, worn glove box latch handle, and it can also serve as decorative car interior trim.

Product Specifications

• Material: ABS
• Color: Black, Beige
• Quantity: 1 glove box latch handle
• Part numbers: 6Q0857131D, 6Q0857131C
• Compatible models: Volkswagen VW Polo 2005–2009

What It Is / How It Works

This car glove box latch handle is a replacement part for the glove box lock on a Volkswagen Polo, fitting the 2005 to 2009 model years. Replacement latch handles are small interior parts that hold the glove box closed and release it when the handle is pulled.

Who It's For / Use Cases

Drivers and car owners who find the glove box will not stay shut, or who see a worn or broken latch, usually look for a direct replacement part. Garages and parts shops that handle Volkswagen Polo interiors also stock this type of latch for repairs.

How to Use / Care

1. Use it to replace a worn glove box latch handle on a Volkswagen Polo from 2005 to 2009.

How to Choose

Start with the part number on the handle you are replacing. The pack holds one latch handle.

Frequently Asked Questions

Which part numbers does it match?
It is listed under part numbers 6Q0857131D and 6Q0857131C, which meet the original standard.

Does it need drilling or cutting?
No. It is a direct replacement and needs no drilling or cutting.

What is the handle made of?
It is made of ABS, which makes the handle solid and long-lasting.

Which colors are available?
It is available in black and beige.

Which Volkswagen models is it for?
It is for the Volkswagen Polo from 2005 to 2009.

How many come in a pack?
The pack contains one glove box latch handle.

Key Features

• Vehicle Fit — It fits the Suzuki SX4 and the Swift RW415, RW416 and RW420 for 2006-2012.
• Mounting Hole Spacing — The mounting holes are approx. 3.4cm (1.3inch) apart.
• Compact Body — It measures approx. 8.6x6x3cm (3.4x2.4x1.2inch), length by width by depth.

Product Specifications

• Material: PP Plastic
• Color: Black
• Size: approx.8.6x6x3cm (3.4x2.4x1.2inch) (LxWxD)
• Distance between Mounting holes: approx.3.4cm (1.3inch)
• Compatible With: SX4; Swift RW415, RW416, RW420; 2006-2012
• Item included: 1 x Car Glove Box Lid Handle

What It Is / How It Works

This car glove box lid handle is a black PP plastic handle for the glove compartment lid on the Suzuki SX4 and the Swift RW415, RW416 and RW420 for 2006-2012. It measures approx. 8.6x6x3cm (3.4x2.4x1.2inch) and has mounting holes approx. 3.4cm (1.3inch) apart.

Who It's For / Use Cases

Glove box lid handles suit drivers of the listed Suzuki models who need a replacement handle for the glove compartment lid. They also suit owners who prefer a plain black handle that matches the car interior.

How to Use / Care

1. Use it as the lid handle for the Suzuki SX4 or the Swift RW415, RW416 or RW420 glove box.
2. Check that the mounting holes, approx. 3.4cm (1.3inch) apart, match the lid before use.

How to Choose

Start with the vehicle. Match the model and the 2006-2012 year in the Compatible With row to your car before you order. The handle is black PP plastic, so choose it when that colour and material suit your interior.

Frequently Asked Questions

Which vehicles does it fit?
It fits the Suzuki SX4 and the Swift RW415, RW416 and RW420 for 2006-2012.

What is it made of?
It is made of PP plastic and is black.

How far apart are the mounting holes?
The mounting holes are approx. 3.4cm (1.3inch) apart.

What size is it?
It measures approx. 8.6x6x3cm (3.4x2.4x1.2inch), length by width by depth.

How many handles come in the pack?
One glove box lid handle is included.

Key Features

• Breathable, Waterproof Surface — The leather is breathable and waterproof.
• Scratch-Resistant Surface — The surface resists scratches from fingernails and keys.
• Easy Wipe Cleaning — It can be cleaned by wiping.

Product Specifications

• Material: Microfiber Leather
• Compatible models: Toyota 4Runner 1996-2002
• Year: 1996 1997 1998 1999 2000 2001 2002
• Condition: 100% new
• Package Includes: 1 piece with adhesive tools

What It Is / How It Works

This microfiber leather armrest cover is a leather skin for the center console armrest of a Toyota 4Runner. It is a cover only, and it is glued over your original center armrest.

Who It's For / Use Cases

Armrest covers like this suit Toyota 4Runner owners from model years 1996-2002 who want to refresh a worn center console armrest. It suits drivers who want a leather-look finish on the original armrest without replacing it.

How to Use / Care

1. Use it to cover the center console armrest of a Toyota 4Runner from 1996-2002.

How to Choose

Start with the vehicle. It fits the Toyota 4Runner 1996-2002, so confirm your model and year before you buy.

Frequently Asked Questions

Which vehicles does it fit?
It fits the Toyota 4Runner 1996-2002.

How is it installed?
It is a cover only, and you glue it over your original center armrest. The package includes 1 piece with adhesive tools.

What is the cover made of?
It is made of microfiber leather, which is breathable and waterproof.

Can the surface be cleaned?
It can be cleaned by wiping.

Does the surface resist scratches?
The surface resists scratches from fingernails and keys.

Key Features

• Precise Polo Fit — It is designed for POLO Type 6R/6C models built 2009–2017 and is made for a precise fit.
• It Uses Existing — It uses the existing hinge and locking mechanisms of the armrest.
• Replace Only the Lid — You replace just the damaged lid instead of the entire armrest, which suits cracks or worn surfaces.

Product Specifications

• Material: Plastic
• Color: Black
• Vehicle fit: POLO Type 6R/6C, 2009–2017

What It Is / How It Works

This car armrest latch lid is a replacement lid for the center console armrest. It is sold as a cover and protector cap for the lid of the console, so you can renew the armrest without replacing the whole unit.

Who It's For / Use Cases

Replacement armrest lids suit drivers whose center console lid is cracked, scuffed or worn and who want to fix that one part. They also suit owners who want the lid to close without rattling and to sit where the original latch was.

How to Use / Care

1. Use the lid on the center console armrest, where its surface is abrasion-resistant and has a non-slip feel.
2. Replace only the damaged lid rather than the whole armrest.

How to Choose

Start with the vehicle. Confirm that your car is a POLO Type 6R/6C built 2009–2017 by checking the Vehicle fit row in Product Specifications. Next, compare the lid's black plastic finish with the rest of your console. If your damaged part is only the lid, this replacement is the match to choose; the existing hinge and lock are reused.

Frequently Asked Questions

Which vehicle does it fit?
It is designed for POLO Type 6R/6C models built 2009–2017.

What is it made of?
It is made of plastic and is black.

Does it need changes to the center console?
No. It uses the existing hinge and locking mechanisms and requires no alterations to the center console.

Do I need to replace the whole armrest?
No. It replaces only the damaged lid, so you do not need a new armrest for a cracked or worn lid.

Does the lid rattle when closed?
It is designed for a precise fit and quiet operation without rattling.

Key Features

• OEM Replacement Part Numbers — It replaces OEM part numbers 51168217485 and 82279404572.
• Damaged Bracket Replacement — It is designed to replace damaged, cracked, or missing center armrest brackets.
• BMW 3 Series E36 Fit — It is specifically designed for the BMW 3 Series E36 from 1990-2000.
• Armrest Mounting Base — It provides a secure mounting base for the center armrest, helping reduce unwanted movement.
• ABS Black Construction — It is made from ABS and finished in black.

Product Specifications

• Features: * Direct for OEM Replacement – Replaces OEM Part Numbers 51168217485
• Part number: 82279404572
• Compatible models: BMW EFor 36 1990–2000

What It Is / How It Works

This is a center console armrest bracket for the BMW 3 Series E36 from 1990-2000. It is a replacement part designed to replace damaged, cracked, or missing center armrest brackets, and it replaces OEM part numbers 51168217485 and 82279404572. Center armrest brackets are mounting parts that hold the armrest to the console, so a broken one can leave the armrest unsupported.

Who It's For / Use Cases

Armrest brackets like this one suit owners of a BMW 3 Series E36 from 1990-2000 who need to replace a damaged, cracked, or missing center armrest bracket. Anyone restoring armrest support in that model's center console will find the bracket's role as a secure mounting base for the armrest directly relevant.

How to Use / Care

1. Fit the bracket as the center armrest mounting base in the BMW 3 Series E36 center console from 1990-2000.
2. Use the bracket for everyday interior use in the center console armrest area.

How to Choose

Choose by the part it replaces. The OEM part numbers 51168217485 and 82279404572 identify this bracket, and it is made for the BMW 3 Series E36 from 1990-2000. The material is ABS in black, so this version suits a black ABS center armrest bracket replacement.

Frequently Asked Questions

Which BMW is this bracket made for?
It is designed for the BMW 3 Series E36 from 1990-2000.

What material is it?
It is made from ABS and finished in black.

Which part numbers does it replace?
It replaces OEM part numbers 51168217485 and 82279404572.

What does the package include?
One center armrest console bracket.

Can it replace a damaged armrest bracket?
It is designed to replace damaged, cracked, or missing center armrest brackets, and its installation type is replacement.

Key Features

• Direct Replacement Fit — It is sold as a direct replacement for a broken or damaged center console lid armrest cover clip.
• Audi A4 B8 Fit — It is labeled for the Audi A4 B8 and A4 Avant from 2008 to 2016.
• Audi A5 Fit — It is labeled for the Audi A5 from 2007 to 2017.

Product Specifications

• Material: Plastic
• Piece Count: 1
• Fitment Type: Direct Replacement
• Year: For A4 For B8 For AVANT 2008-2016 For A5 2007-2017
• Part number: 8K0864207

What It Is / How It Works

This center console lid armrest cover clip is a plastic cover clip sold as a direct replacement part for Audi A4 B8, A4 Avant, and A5 interiors. It is sold as one piece for replacing a broken or damaged clip on the console lid.

Who It's For / Use Cases

Car owners replacing a worn center console lid clip usually want a part that matches the original shape and mounting position. It suits anyone who wants a same-shape replacement rather than a general-purpose clip for a model year covered in the Specifications section.

How to Use / Care

1. Use it to replace a broken or damaged center console lid armrest cover clip on a vehicle that matches the Year row in Specifications.
2. Match the part number 8K0864207 against the clip you are replacing before you buy.

How to Choose

Start with the vehicle model and model years, since the Specifications rows give the years this clip is labeled for. Choose a direct replacement type when you want the new piece to take the original's place rather than a general-purpose clip.

Frequently Asked Questions

Which Audi models is it labeled for?
The Year row gives For A4 For B8 For AVANT 2008-2016 and For A5 2007-2017, so compare your model and year against those ranges.

What is the material?
It is made of plastic and sold as one piece per pack.

Is it a direct replacement part?
Its fitment type is Direct Replacement, which means it is meant to take the place of the original center console lid armrest cover clip.

What is the part number?
The part number is 8K0864207, which you can use to compare against the original clip.

Key Features

• Replacement Part — It replaces the original cup holder in the rear center console.
• Original Part Specifications — It is made according to the original part specifications.
• Left and Right Drive — It can be used in both left-hand drive and right-hand drive cars.

Product Specifications

• Color: Original Black
• Material: PC and ABS
• Placement on Vehicle: Rear Center Console
• Weight: 0.4 kg (0.88 lb)
• Part numbers: 1K0862532, 1K0862532C

What It Is / How It Works

This black cup holder is a replacement part for the rear center console. It fits the VW Jetta 2006-2011 MK5, Golf 2007-2013 MK5 MK6, Rabbit 2006-2009, GTI 2007-2013 and EOS 2006-2011.

Who It's For / Use Cases

Replacement cup holders suit owners who want a direct swap for a worn, cracked or missing rear console holder. Anyone working on a rear center console refit will find this part type easy to match to the original position.

How to Use / Care

1. Replace the original cup holder with this part.
2. Use it in left-hand drive or right-hand drive cars.
3. If you cannot replace the part yourself, re-adjust it or take it to a local professional maintenance shop for installation.

How to Choose

Start with the vehicle: match your model and model years to the fit details, and confirm the part goes in the rear center console. Use the OEM numbers 1K0862532 and 1K0862532C to match against the original part. The color is Original Black.

Frequently Asked Questions

Which cars does it fit?
It fits the VW Jetta 2006-2011 MK5, Golf 2007-2013 MK5 MK6, Rabbit 2006-2009, GTI 2007-2013 and EOS 2006-2011.

What is it made of?
It is made of PC and ABS.

Can it be used in left-hand drive cars?
It can be used in both left-hand drive and right-hand drive cars.

What are the OEM numbers?
The OEM numbers are 1K0862532 and 1K0862532C.

Where does it go and what color is it?
It replaces the original cup holder in the rear center console and is Original Black.

Key Features

• SUBARU Impreza Fit — It is made to fit the SUBARU Impreza WRX STI 2008-2018.
• SUBARU Legacy Fit — It is made to fit the SUBARU Legacy/OutBack 2003-2006.

Product Specifications

• Material: Plastic
• Item Length: 23 cm (9.1 in)
• Item Width: 10.5 cm (4.1 in)
• Item Height: 1 cm (0.39 in)
• Compatible models: SUBARU Impreza WRX STI 2008-2018; SUBARU Legacy/OutBack 2003-2006; SUBARU XV Impreza WRX STI Legacy 66155AG100JC
• Part number: 66155AG100JC

What It Is / How It Works

This cup holder cover is a center console part for SUBARU vehicles. It is made of plastic and fills the cup holder opening when the holder is not in use.

Who It's For / Use Cases

Cup holder covers suit SUBARU owners who want a closed cup holder area when the holder is not in use. They suit drivers who check the model and model years against the fitment list before buying, because fit depends on the exact vehicle.

How to Use / Care

1. Check the Compatible models row against your SUBARU model and model years before you fit the cover.
2. If you are not sure how to fit the cover, have a local auto repair shop install it.
3. Place the cover over the cup holder when the holder is not in use.

How to Choose

Choose by vehicle first. Match your SUBARU model and model years to the Compatible models row in Product Specifications.

Frequently Asked Questions

Which SUBARU models is this cover made to fit?
It is made to fit the SUBARU Impreza WRX STI 2008-2018 and the SUBARU Legacy/OutBack 2003-2006. The Compatible models row in Product Specifications lists both.

What material is the cover made of?
The cover is made of plastic.

What size is the cover?
It measures 23 cm (9.1 in) long, 10.5 cm (4.1 in) wide and 1 cm (0.39 in) high.

How many covers come in one order?
One cup holder cover is included in each package.

Key Features

• Upgraded Design — It has an upgraded design over the original switch cover.
• Solid Build — It is built more solid for everyday use in the console area.
• Durable Build — It is not easy to break.
• Direct Replacement — It replaces the original switch part.
• PC and ABS Body — The part is made of PC and ABS, with chrome plating.

Product Specifications

• Material: PC&ABS, Chrome Plating
• Color: Silver, Piano Black, Carbon Fiber
• Weight: 84.4 g (3 oz)
• Placement on Vehicle: Front Central
• Interchange Part Number: A2056803407, A2056803307
• Compatible models: C Class W205 C200 C250 C300 C400 2014-2021; GLC Class W253 GLC260 GLC200 GLC300 2015-2021

What It Is / How It Works

This switch button is a replacement part for the central storage glove box console armrest cover on certain Mercedes-Benz cars. It fits the C Class W205 (C200, C250, C300, C400, 2014-2021) and the GLC Class W253 (GLC260, GLC200, GLC300, 2015-2021).

Who It's For / Use Cases

Replacement switch parts like this suit owners who need to swap a console switch cover on a compatible Mercedes-Benz model. They suit anyone matching a part to an existing console layout and wanting a like-for-like swap of the original piece.

How to Use / Care

1. Use it as a replacement for the switch button on the central storage glove box console armrest cover.

How to Choose

Choose the model first, since the fit depends on the C Class W205 or GLC Class W253 and the model years in the Compatible models row. Choose the color that matches your console trim: Silver, Piano Black or Carbon Fiber. Both left steering wheel (LHD) and right steering wheel (RHD) cars can use it, so steering layout is not a limit.

Frequently Asked Questions

Which cars does it fit?
It fits the C Class W205 (C200, C250, C300, C400, 2014-2021) and the GLC Class W253 (GLC260, GLC200, GLC300, 2015-2021).

Does it work on left-hand and right-hand drive cars?
It works on both left steering wheel (LHD) and right steering wheel (RHD) cars.

What is it made of and what colors come in?
It is made of PC&ABS with chrome plating, and it comes in Silver, Piano Black and Carbon Fiber.

What are the part numbers?
Its part numbers are 2056803407 and 2056803307, and its interchange part numbers are A2056803407 and A2056803307.

How much does it weigh?
It weighs 84.4 g (3 oz).

Key Features

• One Piece Per Pack — The pack holds one piece.
• Direct Replacement Part — It is a direct replacement part for the glove box lock handle area.
• Chevrolet Captiva Fit — It fits the Chevrolet Captiva from 2007 to 2017.
• Opel Antara Fit — It fits the Opel Antara from 2006 to 2017.

Product Specifications

• Material: Plastic
• Color: Black, Beige, Grey
• Piece Count: 1
• Fitment Type: Direct Replacement
• Part number: 95183126
• Compatible models: Chevrolet For Captiva 2007/2017 For Antara 2006/2017 Plastic

What It Is / How It Works

This glove box lock handle cover is a plastic replacement cover for the lock handle area of a glove box.

It fits the Chevrolet Captiva from 2007 to 2017 and the Opel Antara from 2006 to 2017.

Who It's For / Use Cases

Replacement lock handle covers suit owners who want to swap out a cracked or worn cover on the glove box lock handle rather than replace the whole glove box assembly. They also suit anyone who needs a like-for-like part for a single handle area.

How to Use / Care

1. Use it to replace a broken or damaged glove box lock handle cover.

How to Choose

Start with the vehicle. Confirm the make, model and year against the Captiva and Antara years this cover is made for. Choose the colour that suits your glove box trim: black, beige or grey.

Frequently Asked Questions

Which vehicles does it fit?
It fits the Chevrolet Captiva from 2007 to 2017 and the Opel Antara from 2006 to 2017.

What is it made of?
It is made of plastic.

Is it a direct replacement part?
Yes, it is a direct replacement part for the glove box lock handle area. The pack holds one piece.

What colours does it come in?
It comes in black, beige and grey.

What is the part number?
The part number is 95183126. Compare it with the cover you are replacing before you order.

Key Features

• Diagonal Weave Pattern — It has a diagonal weave pattern with a polished, shiny surface.
• Comes With Adhesive — It comes with adhesive for fixing the piece in place.

Product Specifications

• Compatible models: Audi A4 B8, 2009-2016
• Material: Soft PVC plastic
• Color: Piano Black
• Year: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
• Item included: 1 piece

What It Is / How It Works

This car cup holder panel frame trim cover is an interior trim piece for the cup holder area of the center console. Trim covers of this type sit over the frame around a cup holder to give the panel a finished look. This one is made for the Audi A4 B8.

Who It's For / Use Cases

Cup holder frame covers suit drivers who want to update the look of the center console area without replacing the whole panel. Owners of an Audi A4 B8 from 2009 to 2016 are the fit this piece is made for.

How to Use / Care

1. Clean and dry the install location.
2. Carefully test fit the piece in the install location.
3. Carefully tear off the glue sticker. You may warm the adhesive tape with a hair dryer before install.
4. Fix the position carefully and stick it from one side.
5. You may go to a professional automotive shop for install.

How to Choose

Start with fit. Confirm that your car is an Audi A4 B8 from 2009 to 2016 by checking the model years listed under Compatible models in Product Specifications. The piece is Piano Black with a diagonal weave surface, so choose it if you want a glossy black look for the cup holder area of your center console.

Frequently Asked Questions

Which cars does it fit?
It fits the Audi A4 B8 from 2009 to 2016. The model years are listed under Compatible models in Product Specifications.

What is it made of?
It is made of soft PVC plastic. The surface has a diagonal weave pattern with a polished, shiny finish.

What comes in the package?
The package has one piece, and it comes with adhesive for fixing it in place.

Can it be fitted in cold weather?
Cold weather reduces the viscosity of the adhesive, so fit the piece in a warm room.

How long should it stay away from sun and water after fitting?
Keep it away from strong sunlight and water for 48 hours after fitting.

Key Features

• ABS Plastic Build — It is made of ABS plastic, a rigid material for the glove box lid release handle.
• Listed Dimensions — Its dimensions are 13 cm (5.1 in), 6 cm (2.36 in) and 7 cm (2.76 in).
• Land Rover Vehicle Fit — It is made for the Land Rover Freelander 2 (2007–2015), the Range Rover Classic L321 (1994–2001) and the Land Rover Discovery (2016–2019).
• OE Reference Numbers — Its OE numbers are LR007072, LR002979 and LR007073, so buyers can match the handle to those references.

Product Specifications

• Color: Black
• Material: ABS
• OE number: LR007072/LR002979/LR007073
• Quantity: 1 glove box lid release handle

What It Is / How It Works

This car glove box catch latch handle is a lid release handle for a glove box. It is a black ABS plastic part sold as a single handle, built to release the glove box lid on the listed Land Rover models.

Who It's For / Use Cases

Glove box lid release handles suit car owners and workshops who need a replacement for a worn or broken glove box latch on a supported vehicle. They also suit DIY repairers who want a like-for-like part matched by vehicle model, year range and OE reference. Anyone restoring an older interior latch will find the handle useful for that repair.

How to Use / Care

1. Use it to release the glove box lid on a supported Land Rover model.

How to Choose

Start with the vehicle. Match your Land Rover model and year to the vehicles listed in this description, and compare your part to the OE numbers shown in Product Specifications. Glove box latch handles differ by model, so a matching model and year range matters more than any other choice. Confirm the color is black if your existing handle is black, since the handle is sold in that color.

Frequently Asked Questions

Which vehicles is it for?
It is made for the Land Rover Freelander 2 (2007–2015), the Range Rover Classic L321 (1994–2001) and the Land Rover Discovery (2016–2019).

What is it made of?
It is made of ABS plastic and comes in black.

What are its dimensions and weight?
Its dimensions are 13 cm (5.1 in), 6 cm (2.36 in) and 7 cm (2.76 in). It weighs 20 g.

What part numbers does it match?
The part number is LR007072. The OE numbers are LR007072, LR002979 and LR007073.

How many handles are in the pack?
The pack has one glove box lid release handle.

Key Features

• Soft Resting Layer — Rubber pads for armrest boxes add a soft layer on the lid where the elbow rests.

What It Is / How It Works

This armrest box rubber pad is a cover for the lid of a centre console armrest. Pads of this type sit on the top surface of the lid, giving the elbow a softer place to rest during the drive.

Who It's For / Use Cases

Armrest box rubber pads suit drivers and passengers who want a softer surface under the elbow on a console lid. Owners who notice a worn or hard armrest top often add a pad to change how the lid feels to rest on.

How to Use / Care

1. Use it to cover the armrest box lid for a softer resting surface.

How to Choose

Choose a pad by comparing its shape with the outline of your armrest box lid, since lid shapes differ between vehicles. Think about the surface feel you want under the elbow, then check that the pad covers the area where your arm rests. A close match to the lid gives the most even cover.

Frequently Asked Questions

What is it used for?
It covers the armrest box lid so the elbow rests on a softer surface.

Which vehicle is it for?
Fit depends on the armrest box lid it is made for, so compare your lid's shape with the pad before ordering.

Can it cover a worn armrest lid?
Yes, a pad can cover a worn lid surface, which is a common reason owners add one.

How should I choose the right size?
Match the pad's outline to the top of your armrest box lid so the edges line up with the lid's edges.

Does it suit a lid that is already in good condition?
It can still be used on a lid in good condition if you want a softer place to rest your elbow.

Key Features

• Original Mould Accuracy — It is made from the accurate data of the original mould.
• Tough and Flexible — It has good toughness and flexibility.
• It Has Smooth — It has a smooth hand feeling when you touch it.
• No Sticky Feel — It does not feel sticky in the hand.
• Longer-Lasting Build — It is more durable.

Product Specifications

• Material: PC&ABS
• Color: Beige, Black, Oyster, Red brown, Gray, Moka, Champagne
• Placement on Vehicle: Front
• Intended Use: For BMW 5 Series F10 F11 F18 520 523 525 528 530 2010-2017
• Manufacturer Part Number: F10 F11
• Net Weight: 0.3 kg (0.66 lb)
• Compatible models: BMW 5 Series F10 F11 520i 523i 525i

What It Is / How It Works

This car interior door handle armrest panel is a replacement part for the front left position. Door armrest panels are the trim pieces on the inside of a car door that hold the armrest and handle area.

Who It's For / Use Cases

Owners of a BMW 5 Series F10, F11 or F18 who need a replacement interior door handle armrest panel for the front left position suit this part.

How to Use / Care

1. Choose the correct color and model when you place the order.
2. If you cannot fit the part yourself, re-adjust it or take it to a local professional maintenance shop for installation.

How to Choose

Start with your car. The part is for left-hand steering wheel (LHD) BMW 5 Series F10, F11 and F18 models in the 520, 523, 525, 528 and 530 range, 2010-2017.

It comes in Beige, Black, Oyster, Red brown, Gray, Moka and Champagne.

Frequently Asked Questions

Which cars does it fit?
It fits the BMW 5 Series F10, F11 and F18 in the 520, 523, 525, 528 and 530 range, 2010-2017.

Is it for left-hand drive cars?
It fits left-hand steering wheel (LHD) cars only. It is for the front left position.

What material is it made of?
It is made of PC&ABS.

What colors are available?
It comes in Beige, Black, Oyster, Red brown, Gray, Moka and Champagne.

How much does it weigh?
It weighs 0.3 kg (0.66 lb).

Key Features

• Leather Door Handle — It is a door handle with leather trim.
• BMW 5 Series Fit — It fits the BMW F10 and F11 5 Series, 2010-2017.
• Correct Connector — It has a correct connector, so no cutting or splicing is needed.

Product Specifications

• Material: ABS and leather
• Fits: BMW 5 Series F10/F11, 2010-2017; BMW 5 Series F10 F11 520i 523i 525i 528 530 51417225851
• Package Contents: 1 door handle with leather
• Item Length: 345 mm (13.6 in)
• Item Height: 85 mm (3.35 in)
• Item Weight: 166 g (5.9 oz)
• Part number: 51417225851

What It Is / How It Works

This car interior door handle is a replacement door handle with leather trim for the BMW 5 Series F10 and F11. It is built as a front passenger door handle with an armrest-style panel fit.

Who It's For / Use Cases

Car owners and repair shops who need a replacement interior door handle for a BMW 5 Series F10 or F11 usually look for a part that matches the car's model years and the leather trim of the original handle.

How to Use / Care

1. If you are unsure how to fit it, ask for installation instructions, which can be provided on request.
2. Or have your local auto repair shop fit the handle.

How to Choose

Start with the vehicle. The handle is made for the BMW 5 Series F10 and F11 from 2010-2017, so match your car to those models and years before you choose. Check that the part number 51417225851 matches what you need.

Frequently Asked Questions

Which BMW models does it fit?
It fits the BMW F10 and F11 5 Series, 2010-2017. Match your car to those models and years before ordering.

What is it made of?
It is made of ABS and leather.

What size and weight is it?
It measures 345 mm (13.6 in) long and 85 mm (3.35 in) high, and it weighs 166 g (5.9 oz).

What is the part number?
The part number is 51417225851.

Can I get help installing it?
Installation instructions can be provided on request. A local auto repair shop can also fit the handle for you.

What colors does it come in?
The color options are Black, Beige, Oyster, Gray, Red and Moka.

Key Features

• PC and ABS Build — It is made of PC and ABS with a rubberized coating.
• BMW 3 Series Fit — It fits the BMW 3 Series M3 E93 Convertible Cabriolet in 320i, 325i, 330i and 335i models.
• 2007-2014 Model Years — It fits the BMW 3 Series E93 from 2007-2014.
• Replacement Part — It is a replacement armrest cover, panel trim and pull handle for the interior door.

Product Specifications

• Material: PC and ABS with rubberized coating
• Color: Black, Beige, Gray, Carbon Fiber
• Placement on Vehicle: Front left
• Weight: 0.3 kg (0.66 lb)
• OEM No.: 61319132162, 51419139627

What It Is / How It Works

This replacement armrest cover, panel trim and pull handle is a door trim part for the interior of the BMW 3 Series E93. It is made of PC and ABS with a rubberized coating, and it fits the 320i, 325i, 330i and 335i models from 2007-2014.

Who It's For / Use Cases

Door armrest covers and pull handle trim parts suit BMW 3 Series owners who are replacing a worn or damaged interior door trim piece. Owners who want to refresh the look of the door trim in a color that suits the cabin can use this type of part.

How to Use / Care

1. Fit the front left driver interior door armrest cover, panel trim and pull handle to the BMW 3 Series E93 320i, 325i, 330i or 335i, 2007-2014.
2. If you cannot replace the parts well by yourself, re-adjust it or take it to a local professional maintenance store to install it.

How to Choose

Start with the BMW 3 Series model and body style, then check the model range in Product Specifications against your car. Pick the color that suits your interior from the options listed in Product Specifications. If you need a different door position, confirm the placement row before you order.

Frequently Asked Questions

Which BMW models does it fit?
It fits the BMW 3 Series E93 from 2007-2014, including the Convertible Cabriolet and M3 models with 320i, 325i, 330i and 335i engines.

What is it made of?
It is made of PC and ABS with a rubberized coating.

Which colors are available?
It comes in black, beige, gray and carbon fiber.

What size is it?
It measures 40.5 cm (15.9 in), 8 cm (3.15 in) and 6 cm (2.36 in), and it weighs 0.3 kg (0.66 lb).

Which door position is it for?
It is for the front left interior door position.

Key Features

• Replacement Armrest Trim — It is a replacement armrest pull handle trim for the interior door.
• PC and ABS Build — It is made of PC and ABS with a rubberized coating.
• BMW E92 Coupe Fit — It is made for the BMW 3 Series E92 Coupe, 2007–2014, including the 320i, 330i and 335i.
• Four Colour Options — It is offered in Black, Beige, Gray and Carbon Fiber.
• Trim Dimensions — It measures 40.5 cm (15.9 in), 8 cm (3.15 in) and 6 cm (2.36 in).

Product Specifications

• Material: PC and ABS with rubberized coating
• Color: Black, Beige, Gray, Carbon Fiber
• Placement on Vehicle: FRONT LEFT
• Intended Use: For BMW 3 Series E92 COUPE
• Weight: 0.3 kg (0.66 lb)
• OEM NO.: 61319132162, 51419139627

What It Is / How It Works

This left-hand interior door armrest panel cover is a trim pull handle piece for the BMW 3 Series E92 Coupe. It is a replacement part made of PC and ABS with a rubberized coating. It is for the front left position.

Who It's For / Use Cases

Owners of a BMW 3 Series E92 Coupe who need to replace a worn or damaged interior door armrest trim will find this type of cover useful. Replacement trim pieces like this suit drivers who want a direct swap for the original part and who are comfortable checking the side and fit before installing it.

How to Use / Care

1. Replace the part yourself if you are able to do so.
2. If you cannot replace it well by yourself, re-adjust it or take it to a local professional maintenance store for installation.

How to Choose

Start with the position: the part is for the front left side, so confirm it matches the side you need on a left-hand-drive BMW 3 Series E92 Coupe. Next, choose the colour from Black, Beige, Gray or Carbon Fiber to match your interior. Last, compare the dimensions of 40.5 cm (15.9 in), 8 cm (3.15 in) and 6 cm (2.36 in) with the trim you are replacing.

Frequently Asked Questions

Which BMW models does it fit?
It is made for the BMW 3 Series E92 Coupe, 2007–2014, including the 320i, 330i and 335i.

Which side of the car is it for?
It is for the front left position and is a left hand driver part.

What is it made of?
It is made of PC and ABS with a rubberized coating.

What colours are available?
It comes in Black, Beige, Gray and Carbon Fiber.

What size and weight is it?
It measures 40.5 cm (15.9 in), 8 cm (3.15 in) and 6 cm (2.36 in) and weighs 0.3 kg (0.66 lb).

Key Features

• Vehicle Fit — It fits the Toyota Yaris / Vitz for model years 2010-2014.
• Switch Panel Cover — It is a trim cover for the window lift control switch panel and works as a lift button trim.
• Armrest Door Panel — It is made for the armrest door panel area next to the window controls.
• Armrest Upper Frame — It is made for the front and rear armrest upper frame areas.

Product Specifications

• Vehicle model: Toyota Yaris / Vitz
• Model year: 2010-2014

What It Is / How It Works

This window lift control switch panel cover trim is a replacement-style trim piece for the Toyota Yaris / Vitz. It covers the area around the window lift buttons on the driver-side door armrest and the front and rear armrest upper frame areas.

Who It's For / Use Cases

Window switch cover trims suit Toyota Yaris and Vitz owners who want to refresh or replace the trim around the window lift control switch panel. They also suit people who are working on the armrest area and want a matching trim piece for the window controls.

How to Use / Care

1. Use it as a cover trim for the window lift control switch panel.
2. Use it on the Toyota Yaris / Vitz window lift control switch panel for model years 2010-2014.
3. Use the lift button trim on the armrest door panel.
4. Have a professional install it, since professional installation is recommended.

How to Choose

Start with the vehicle. Match the Toyota Yaris / Vitz and a model year within 2010-2014 before you order. Application years differ by market, so check your car's model year against the model years stated for this cover.

Frequently Asked Questions

Which vehicle is this cover for?
It fits the Toyota Yaris / Vitz for model years 2010-2014.

Which part of the car does it cover?
It is a trim cover for the window lift control switch panel, with a lift button trim.

Do application years vary by market?
Application years differ by market, so compare your Toyota Yaris / Vitz model year with 2010-2014 before you buy.

Is professional installation needed?
A professional installation is recommended for this cover.

Who is the brand?
The brand is RAVEX.

Key Features

• Adjustable Lifting Range — It lifts from 4.5 to 12 cm and adjusts infinitely within that range.
• 20 kg Capacity — Its capacity is 20 kg (44.1 lb).
• Flat Surface Mounting — It needs a flat mounting surface wider than 7 cm.

Product Specifications

• Dimensions: 17.3 × 7.5 × 12 cm (6.8 × 2.95 × 4.7 in)
• Capacity: 20 kg (44.1 lb)
• Lifting range: 4.5~12 cm (infinitely adjustable)
• Installation requirement: Flat surface wider than 7 cm
• Installation method: Double-sided tape
• Compatible models: Driver's Long-distance Driving Fatigue Prevention

What It Is / How It Works

This car armrest lifting bracket is a driver's door accessory that raises the armrest pad to a higher position. Armrest lifting brackets are a category of car door accessories that sit between the door panel and the armrest pad, extending its reach.

Who It's For / Use Cases

Armrest lifting brackets suit drivers who spend long stretches behind the wheel and want the armrest pad at a different height than the factory position. They are a practical choice for anyone whose door armrest sits too low for their arm.

How to Use / Care

1. Use it to raise the armrest pad on a driver's car door during long-distance driving.
2. Before fitting it, confirm the mounting area is a flat surface wider than 7 cm, since the bracket is attached with double-sided tape.

How to Choose

Choose a bracket by the height change you need. This one lifts from 4.5 to 12 cm, so measure the gap between your armrest pad and the door panel before you buy. Confirm the door area you plan to use is flat and wider than 7 cm, since that is the mounting requirement for this model.

Frequently Asked Questions

How high does it lift?
It lifts from 4.5 to 12 cm, and the height adjusts infinitely within that range.

What load can it carry?
Its capacity is 20 kg (44.1 lb).

How is it attached?
It is attached with double-sided tape, and it needs a flat surface wider than 7 cm.

What size is it?
It measures 17.3 × 7.5 × 12 cm (6.8 × 2.95 × 4.7 in).

Who makes it?
The brand is WYMECT.

Key Features

• Elbow Support Height — Armrest box cushion pads of this kind are made to raise the elbow support height of the armrest box.

Product Specifications

• Vehicle models: Volvo XC60, S90, XC90, V90, S60

What It Is / How It Works

This interior armrest box cushion pad is a height increase pad for the elbow support of a car armrest box. Cushion pads in this category sit on the armrest box to change how high the arm rests, so the elbow has a higher, more comfortable support point while the car is in use.

Who It's For / Use Cases

Drivers and passengers who rest an elbow on the armrest box and find the height too low are the typical buyers for cushion pads of this kind. They suit owners of the Volvo models named in the specifications who want more elbow support on longer drives.

How to Use / Care

1. Use it to raise the elbow support height of the armrest box.

How to Choose

Start with the vehicle. Pick a pad for the Volvo model you drive, since the models named in the specifications are the ones it is for. Cushion pads of this kind change how high the arm rests, so choose the height that keeps the elbow comfortably supported during your usual drives.

Frequently Asked Questions

Which vehicles is it for?
It is for Volvo XC60, S90, XC90, V90 and S60 models. The Part number row in Product Specifications is XC60S90XC90V90S60.

What does it do?
It raises the elbow support height of the armrest box, so the elbow rests at a higher point.

Who is it for?
It suits drivers and passengers who want more elbow support on the armrest box during longer drives.

Does it cover other car brands?
The fitment is limited to Volvo XC60, S90, XC90, V90 and S60 models, so vehicles outside those models are not covered.

Key Features

• ABS+PC Material — The button is made from ABS+PC, a plastic material.
• Black Finish — The button is black in color.
• 24 mm Square Size — It measures 24 × 24 mm (0.94 × 0.94 in), so check your old knob before ordering.
• Replacement Knob Button — It is intended to replace old or broken knob buttons on the rear air conditioning panel.

Product Specifications

• Compatible models: For Sharan 7N1 7N2 2012-2019; For Seat Alhambra 2011-2016
• Material: ABS+PC
• Colour: Black
• Size: 24 × 24 mm (0.94 × 0.94 in)
• Reference OEM number: 7N0907049C

What It Is / How It Works

This A/C knob button is a replacement control knob for a rear air conditioning panel. Knob buttons like this one sit on the panel face and let the driver or passenger adjust climate settings by hand. The listing covers a single black button measuring 24 × 24 mm.

Who It's For / Use Cases

Replacement control knobs suit people who need to swap out a worn, cracked, or missing button on a vehicle climate control panel. Shoppers who already have the old part can compare its shape, color, and markings against this listing before ordering, which helps avoid a wrong-size purchase.

How to Use / Care

1. Use this button as a replacement for an old or broken knob on the rear air conditioning panel.
2. The ABS+PC body is described as reliable in use.
3. The listing describes installation as easy and direct.

How to Choose

When choosing a replacement knob button, start with physical fit. Compare the overall footprint, color, and shape against the old part, since small shape differences can affect how a knob seats on the panel. Matching the old part first avoids returns and wasted time.

Use the Reference OEM number 7N0907049C and the 24 × 24 mm size in Product Specifications to confirm the match, and note the black color listed there before you buy.

Frequently Asked Questions

What size is this knob button?
It measures 24 × 24 mm (0.94 × 0.94 in). Measure the old knob across its face before ordering to confirm the match.

What material is the button made from?
The button is made from ABS+PC, a plastic material. The listing describes the body as reliable in use.

What color is it?
The finish is black, and the color appears in Product Specifications so you can compare it with your current button.

What reference number should I match?
The Reference OEM number is 7N0907049C. Compare it with the number on your old part or with the part number you are replacing.

Where is this button installed?
It is intended to replace old or broken knob buttons on the rear air conditioning panel, which is the installation location in the listing.

Key Features

• Chrome-Plated Finish — It is made from PC+ABS with a chrome plating finish.
• Decorative Lock Core — It is a decorative lock core that cannot lock the storage box.
• Front Vehicle Position — It is meant for the front position on the vehicle.

Product Specifications

• Material: PC+ABS+Chrome Plating
• OEM number: 2036800384
• Placement on vehicle: Front
• Vehicle make: Mercedes BENZ

What It Is / How It Works

This car glove box switch handle lock cylinder is made for Mercedes BENZ vehicles. It is a decorative lock core and cannot lock the storage box.

Who It's For / Use Cases

Owners of Mercedes BENZ cars who need a glove box switch handle lock cylinder for the front dashboard area will find this part relevant. It suits buyers who want a decorative lock core for that spot, since it does not lock the storage box.

How to Use / Care

1. Use it as a decorative lock core for the glove box switch handle on a Mercedes BENZ car.

How to Choose

Start with the vehicle, since this part is made for Mercedes BENZ cars. Next, match the placement to the front position on the vehicle. Check the material as well, which is PC+ABS with a chrome plating finish. If you need a lock that secures the glove box itself, this decorative lock core does not provide that function.

Frequently Asked Questions

Can this part lock the glove box?
No. It is a decorative lock core and cannot lock the storage box, so it does not secure the glove box.

What material is it made from?
It is made from PC+ABS with a chrome plating finish.

Which vehicles is it made for?
It is made for Mercedes BENZ vehicles and is meant for the glove box switch handle area.

Where is it placed on the vehicle?
It is meant for the front position on the vehicle.

What is the OEM number?
The OEM number is 2036800384.

Key Features

• Carbon Fiber Texture — The carbon fiber texture gives the armrest box a fashionable interior look.
• Molded ABS Build — It is molded from one piece of ABS with a three-dimensional texture.
• Rounded Edges — The round, smooth arc edges give the cover a clean outline.
• Press-On Installation — It is set over the original armrest box by pressing it firmly, without altering the car.

Product Specifications

• Material: Plastic
• Color: Black
• Fitment: For Mercedes Benz C, E, GLK Class W204, W212, X204; E260, GLK300; 2009–2013; left-hand drive

What It Is / How It Works

This carbon fiber-pattern armrest box cover is a car interior accessory that sits over the center console armrest box. It is molded from ABS plastic and is sold as a set of two pieces for left-hand drive Mercedes-Benz C, E and GLK models. Armrest box covers are trim panels that change the look of the console without replacing the whole panel.

Who It's For / Use Cases

Armrest box covers suit car owners who want a tidy center console and a carbon fiber look inside the cabin. They suit drivers who want to update a plain or worn armrest box panel without replacing the whole panel, and owners who prefer dark, sporty-looking trim in a black finish.

How to Use / Care

1. Use it to cover the armrest box panel in the car interior.
2. Check the Fitment row in Product Specifications against your vehicle before you fit it.

How to Choose

Start with the vehicle. Match the Fitment row in Product Specifications to your car's model, model code, build years and steering side before you buy. Next, consider the finish: it is black with a carbon fiber pattern, which suits interiors that already use dark trim. Finally, check the pack: the set has two pieces, so confirm that count fits your needs.

Frequently Asked Questions

Which vehicles does it fit?
The Fitment row lists Mercedes-Benz C, E and GLK Class models W204, W212 and X204, including the E260 and GLK300, for 2009 to 2013 cars with left-hand drive.

What is it made of?
It is made of plastic, molded as one piece from ABS with a three-dimensional texture.

Does it need to be drilled or modified to fit?
No. It is a non-destructive fit: it goes over the original armrest box and is held in place by pressing it firmly.

How many pieces are in the pack?
The set has two pieces. It comes packed in bubble bag packing rather than a retail box.

What colour is it?
It is black with a carbon fiber pattern.

Key Features

• Soft Microfiber Leather — It is made from microfiber leather with a soft touch.
• Built-In Memory Foam — Thickened memory foam is built in to cushion the elbow while you drive.
• Side Storage Pockets — Two small pockets, one on each side, measure 8.66*5.12 inches for phone, keys, receipts and change.
• Elastic Band Mounting — Two stretchy elastic bands on the back slip into the armrest box to hold the cushion in place.
• Dot Adhesive Grip — Dot adhesive on the back gives slip resistance and leaves no glue marks on the armrest pad.

Product Specifications

• Material: Leather
• Overall size: 12.13*7.80*0.79 inch
• Pocket size: 8.66*5.12 inches, one pocket on each side
• Armrest box type: Front opening and closing; not for left and right double opening armrest boxes
• Elastic bands: 2 stretchy elastic bands on the back
• Color options: 5 basic colors plus 7 color schemes

What It Is / How It Works

This is a microfiber leather armrest cushion for the armrest box in a car's center console. It is made from microfiber leather and sits over the armrest box top to give the elbow a padded rest.

Who It's For / Use Cases

Armrest cushions of this kind suit drivers and passengers who rest an elbow on the center armrest for long periods. They suit owners who want to protect a worn console surface, keep small everyday items within reach, and add a padded, leather-look top to the armrest box in a front opening and closing type.

How to Use / Care

1. Open the original armrest box.
2. Slip the 2 elastic bands into the box from front to back.
3. Slightly adjust the position of the armrest pads.
4. Place small items such as keys, receipts or change in the side pockets.

How to Choose

Start by checking the armrest box type. This cushion is made for front opening and closing armrest boxes and does not suit left and right double opening armrest boxes.

Measure the length and width (LxW) of your armrest box and compare it with the overall size in the specifications, since the style and size of the armrest box varies by car model. Pick one of the color options to match your car's interior.

Frequently Asked Questions

Will it fit my car?
It is for front opening and closing armrest boxes and does not suit left and right double opening armrest boxes. Armrest box style and size vary by car model, so measure the length and width (LxW) of your box before ordering.

What is it made of?
It is made from microfiber leather with a soft touch.

How does it stay in place?
Two stretchy elastic bands on the back slip into the armrest box. Dot adhesive on the back adds slip resistance without leaving glue marks on the armrest pad.

How large are the pockets and the cushion?
Each side pocket measures 8.66*5.12 inches. The overall size of the cushion is 12.13*7.80*0.79 inch.

Does it have padding?
Thickened memory foam is built in under the cover to cushion the elbow.

What colors are available?
It comes in 5 basic colors, plus 7 color schemes developed on top of them.

Key Features

• Plastic Construction — The cover is made of plastic, the material given for this part.
• Original-Design Match — The listing describes the design as the same as the original part.
• OEM Reference Numbers — OEM numbers 1J0919341F and 1J0919341D are listed for matching against your existing part.
• Single Cover Pack — Each order contains one cover.

Product Specifications

• Material: Plastic
• Condition: New
• Packaging: 1 x Cover
• OEM Number: 1J0919341F, 1J0919341D
• Compatible models: VW Golf 6 7 Passat B8 Tiguan 5N Touran Jetta Polo Skoda Rapid Kodiaq
• Part number: 1K0919341F

What It Is / How It Works

This 12V power outlet socket cover lid is a replacement-style cover for a car power outlet housing. The listing gives its material as plastic and its condition as new.

Who It's For / Use Cases

Shoppers who compare OE numbers before buying get the most value from that matching step. Confirm the OE number against your original part so the fit matches your vehicle.

How to Use / Care

1. Before fitting, compare the OE number with your original part, as the listing advises.

How to Choose

Start with the OE number, since the listing says it must match your original part for a correct replacement. Next, confirm the vehicle lines the cover is meant for before ordering. Plastic is the material to expect, and each pack holds one cover, so check that the quantity matches your need.

Frequently Asked Questions

What material is this cover?
The cover is made of plastic. Each pack holds one cover, and the condition is new.

Is this an original part?
The listing describes the design as the same as the original, but it also states that the product is not an original product. Confirm this before you buy.

Which OE numbers should I compare?
The listing gives OEM numbers 1J0919341F and 1J0919341D. Compare them with your original part before ordering, since the listing says the numbers must match.

How many covers are in one order?
Each pack contains one cover, as shown in the packaging details. Plan quantities if you need covers for more than one socket.

Which certification is listed?
The listed certification is CCC, and the condition is new.

Key Features

• Self-Adhesive Backing — The back has an adhesive layer covered by protective release paper, so the fabric can be peeled and pressed onto a surface.
• Easy to Cut — The fabric is flexible and can be cut with scissors or a craft knife into different shapes and sizes.
• Wear-Resistant Surface — The suede-style surface is wear resistant and durable.
• Strong Adhesion — It bonds firmly to the surface it covers.
• Damage Concealment — It helps cover scratches, stains, cracks, and peeling areas on selected surfaces.

Product Specifications

• Size: 10-200cm
• Applicable surface: Plastic, Metal, Wood, Glass, Smooth Panel; Synthetic Leather, Faux Leather, Selected Leather Surface
• Material: Suede Fabric, Faux Suede, Velvet Fabric, Synthetic Leather, Polyester Fabric
• Backing: Adhesive backing with protective release paper
• Cutting method: Scissors or craft knife
• Installation difficulty: Suitable for DIY use

What It Is / How It Works

This self-adhesive suede patch fabric is a flexible repair and decoration material for interior surfaces and small household items. It comes in the 10-200cm size range and is sold for patching, covering, and decorating.

Who It's For / Use Cases

Self-adhesive fabric patches suit people who want to refresh worn trim, scratched panels, or small furniture surfaces without sewing. They are a common choice for DIY projects, crafts, and small repairs where a cut-to-size piece is enough.

How to Use / Care

1. Use the fabric to refresh or cover selected areas inside a vehicle, such as interior trim decoration and car roof trim details.
2. Measure, cut, peel, position, and press the fabric onto the surface.
3. Trim the fabric into the shape and size of your repair area using scissors or a craft knife.
4. Avoid pulling, washing, or heavily touching the repaired area immediately after installation.
5. Avoid washing or soaking the repaired area immediately after installation

How to Choose

Choose the length by measuring the area you plan to cover. Small pieces suit local repairs, while longer pieces suit dashboard renovation, furniture covering, and door panel decoration. Order slightly more than the exact size so there is room to trim and adjust.

Frequently Asked Questions

Does it need sewing?
For most flat and decorative applications, no sewing is needed because the product has an adhesive backing. Sewing or additional adhesive may help in high-stress areas.

Can it be cut into custom shapes?
Yes. Scissors or a craft knife can cut the material into strips, rectangles, circles, curves, letters, and custom shapes.

Can it cover cracks and scratches?
It can help cover visible scratches, stains, peeling areas, and some surface cracks. Deep structural damage should be repaired before the fabric is applied.

Can I use it on a car dashboard?
Yes, it can be used for selected dashboard renovation and decoration. The dashboard must be clean, dry, oil-free, and free from silicone-based polish before installation.

Can it be removed?
Removal may be possible, but the result depends on the surface, installation time, temperature, and adhesive condition. Residue may remain on some surfaces.