Key Features

• ABS Plastic Build — The latch is made of ABS plastic.
• Direct Replacement Part — It is sold as a direct replacement for an old or broken glove box lock.

Product Specifications

• Compatible models: For Suzuki Jimny 1998-2018; Fitment1 : For Suzuki Grand Vitara 1997-2017; Fitment2 : for Chevrolet tracker 2000
• Material: ABS
• Color: Gray
• Part number: 7343076811P4Z

What It Is / How It Works

A glove box lock latch handle is the small latch part that holds the glove compartment door closed and releases it when the handle is pressed. Replacement latches of this kind are bought for cars where the original lock has worn out, cracked or lost its catch. Because the latch sits in a fixed opening, the mounting shape matters as much as the handle itself.

Who It's For / Use Cases

Car owners who need to replace a worn, cracked or broken glove box latch will find this type of part useful. Auto repair shops and do-it-yourself drivers often buy a replacement latch when a glove compartment will no longer stay shut or fails to open when the handle is pulled.

How to Use / Care

1. Use it to replace a glove box lock latch handle on a car.

How to Choose

Start by matching the vehicle make, model and years to your car before ordering, since glove box latches differ between models. Check that the mounting shape of the latch matches the opening in your glove box. Confirm the part number 7343076811P4Z against your original lock before you buy.

Frequently Asked Questions

What material is the lock made of?
It is made of ABS plastic and is finished in gray.

Is it a direct replacement for the original lock?
It is sold as a direct replacement for an old or broken glove box lock, so it is meant to take the place of the original part.

What is the part number?
The part number is 7343076811P4Z.

What does a glove box latch do?
It holds the glove compartment door closed and lets it open when the handle is pulled, so a worn latch can leave the door loose or stuck.

Key Features

• Factory Specification Fit — It is made to the original factory specifications, so it is built to match the factory part.
• Plastic Build — It is made of plastic, a lightweight material for a glove box lock latch handle.
• Vehicle Listing Fit — It is listed to fit the Jimny Vitara Grand Vitara.

Product Specifications

• Color: Gray
• Material: Plastic
• Size: approx. 8.9 x 3.9 cm (3.4 x 1.5 inch) (LxW)
• Compatible With: fit for Jimny Vitara Grand Vitara; Grand Vitara 2000–2016
• Item included: 1 x Glove Box Lock
• Part number: 7343076811P4Z

What It Is / How It Works

This is a car glove box lock latch handle, an aftermarket replacement for the glove box lock on the vehicles listed. It is gray, made of plastic, and sold as one glove box lock.

Who It's For / Use Cases

Drivers who need a replacement glove box latch for a listed Grand Vitara or Jimny Vitara will use this type of part. Glove box lock latch handles suit owners whose glove compartment no longer latches or locks properly and who want a replacement part that follows the design of the original.

How to Use / Care

1. Use it as a replacement glove box lock latch handle on a listed Grand Vitara or Jimny Vitara.

How to Choose

Start with the Compatible With row in Product Specifications and confirm it lists your vehicle. Choose the gray color listed in Product Specifications if you want the part to match the color shown there.

Frequently Asked Questions

Will it fit my vehicle?
It is listed to fit the Jimny Vitara Grand Vitara. Check the Compatible With row in Product Specifications against your vehicle before you order.

Is it a genuine part?
It is an aftermarket replacement item and is not a genuine part. It is made to the original factory specifications.

What material is it made of?
It is made of plastic and is gray.

How big is it?
It measures approx. 8.9 x 3.9 cm (3.4 x 1.5 inch) for length by width.

Key Features

• Compact Length — It measures 7 cm (2.76 in).
• Lightweight Part — It weighs 24 g (0.85 oz).
• Direct Connector Fit — It has a correct connector, so no cutting or splicing is needed.
• Replacement Switch — It is made as a replacement glove box switch.

Product Specifications

• Material: ABS
• Dimensions: 7 cm ; 2.7 cm
• Weight: 24 g (0.85 oz)
• Placement on Vehicle: Front
• Package Contents: 1 glove box switch

What It Is / How It Works

This glove box switch is a replacement lid switch for the glove box compartment. It is made of ABS and is made as a replacement part.

Who It's For / Use Cases

Car owners who need to replace a worn glove box lid switch will look for a direct replacement of this kind. Repair shops and DIY owners working on a dash compartment are the usual buyers.

It fits the Mercedes Benz W204 C Class (2008–2014) and the W212 E Class (2009–2014).

How to Use / Care

1. Use it to replace the glove box lid switch in the compartment it is made for.

How to Choose

Start by checking your car's model and build years. This switch suits the Mercedes Benz C Class (W204) 2008–2014 and E Class (W212) 2009–2014, so the vehicle needs to fall within those groups.

Look for an ABS body when choosing a glove box switch, since ABS is a common plastic for this type of part. Note the connector and mounting style your car uses so the switch you pick matches the existing compartment.

Frequently Asked Questions

Is anything else in the package?
One glove box switch is included.

Does it need cutting or splicing to fit?
It has a correct connector, so no cutting or splicing is needed to fit it.

Which Mercedes Benz models is it for?
It fits the Mercedes Benz W204 C Class (2008–2014) and the W212 E Class (2009–2014).

What is the switch made of and how large is it?
It is made of ABS. It measures 7 cm (2.76 in) and 2.7 cm (1.06 in), and weighs 24 g (0.85 oz).

Is it a replacement part?
It is made as a replacement glove box switch, so it is meant to take the place of a worn one.

Key Features

• Glove Box Lock Latch — It is a glove box lock latch with a switch handle for the glove compartment.
• Mitsubishi Pajero Fit — It is made for Mitsubishi Pajero Montero MK3 vehicles, including the V73, V77 and V75 models.
• Model Year Coverage — It covers model years 2000, 2001, 2002 and 2003-2006.

Product Specifications

• Item: Glove box lock latch with switch handle kit
• Model years: 2000, 2001, 2002, 2003-2006
• Part number: MR402499

What It Is / How It Works

This car glove box lock kit is a latch lock switch handle for the glove compartment. It is made for Mitsubishi Pajero Montero MK3 V73, V77 and V75 models from model years 2000 to 2006.

Who It's For / Use Cases

Owners of a Mitsubishi Pajero Montero MK3 who need to replace a glove box lock latch are the people this kit suits. Repair shops that service older Pajero glove compartments can also use the part number as a reference when sourcing a replacement.

How to Use / Care

1. It is strongly recommended to use a professional installation for this glove box lock latch.
2. Before buying, compare part number MR402499 with the original part on your vehicle.

How to Choose

Start with the vehicle. Check that your Mitsubishi Pajero Montero is an MK3 with a V73, V77 or V75 model and a model year from 2000 to 2006. Model and year coverage can differ between markets, so match the part number MR402499 to the original part before ordering.

Frequently Asked Questions

Which vehicles does this kit fit?
It is made for the Mitsubishi Pajero Montero MK3, V73, V77 and V75 models, with model years 2000 through 2006.

What is the part number?
The part number is MR402499, which is also the OEM number.

Do model years differ between markets?
Model and application years differ between markets. Match the years 2000, 2001, 2002 and 2003-2006 and the part number MR402499 to your car.

Key Features

• Aftermarket Replacement — This is an aftermarket replacement item and is not a genuine part.
• Vehicle Fit Listing — The listing states a fit for Jimny, Vitara, and Grand Vitara models.
• Plastic Construction — The glove box lock is made of plastic.
• Gray Finish — The color is gray.
• Compact Dimensions — Measures approx. 8.9 x 3.9 cm (3.4 x 1.5 inch) length by width.

Product Specifications

• Color: Gray
• Material: Plastic
• Size: approx. 8.9 x 3.9 cm (3.4 x 1.5 inch) (LxW)
• Compatible With: fit for Jimny Vitara Grand Vitara; Grand Vitara 2000–2016
• Item included: 1 x Glove Box Lock
• Part number: 7343076811P4Z

What It Is / How It Works

This glove box lock latch handle is an aftermarket replacement item, not a genuine part. It is listed to fit Jimny, Vitara, and Grand Vitara models and is supplied as one glove box lock.

Who It's For / Use Cases

Glove box latch replacements suit vehicle owners who need to swap a worn, broken, or missing glove compartment lock on a supported model. Drivers who want a like-for-like gray plastic part in place of the original trim piece may find this type of replacement useful.

How to Use / Care

1. Use this item as a replacement glove box lock latch handle on a compatible vehicle, as the title describes.
2. Confirm the vehicle model matches the listed Jimny, Vitara, or Grand Vitara fit before use.

How to Choose

Start with the vehicle. Confirm your model matches the listed Jimny, Vitara, or Grand Vitara fit before comparing other details. Next, compare the gray plastic finish with the surrounding interior trim so the replacement blends in. Check the approximate length and width against the part you are replacing, because dimensions are measured by hand and small deviations are possible. Finally, decide whether an aftermarket replacement suits your needs, since this item is not a genuine part.

Frequently Asked Questions

Is this a genuine part?
No. The listing describes it as an aftermarket replacement item, not genuine. It is a gray plastic glove box lock latch handle.

Which vehicles is it listed for?
The listing states a fit for Jimny, Vitara, and Grand Vitara models. The Compatible With row in the specifications shows the same fit.

What size is it?
It measures approx. 8.9 x 3.9 cm (3.4 x 1.5 inch) length by width. Dimensions are hand-measured, so small deviations are possible.

What is included in the package?
One glove box lock is included.

What color and material is it?
It is gray and made of plastic.

Key Features

• Plug-In Connector — The connector fits without cutting or splicing the wiring.
• W164 ML and GL Fit — It fits the Mercedes-Benz W164 ML and GL from 2006-2011.
• Package Includes One — The package includes one glove box switch.

Product Specifications

• Material: ABS
• Vehicle fit: Mercedes-Benz W164 ML and GL, 2006-2011
• Interchange Part Number: 1646800191
• Package: 1 glove box switch
• Compatible models: Mercedes Benz ML GL Class W164 ML320 ML450 GL400 2006–2011

What It Is / How It Works

This glove box lock switch is a replacement switch for the Mercedes-Benz W164 ML and GL from 2006-2011.

Who It's For / Use Cases

Owners of Mercedes-Benz W164 ML and GL models who need a replacement glove box lock switch are the people this part suits. Independent repair shops and parts buyers sourcing a switch for these models fall into the same group.

How to Use / Care

1. Use it to replace the glove box lock switch on a compatible Mercedes-Benz W164 ML or GL.

How to Choose

Start with the vehicle. Confirm that your car is a Mercedes-Benz W164 ML or GL from 2006-2011, since that is the fit this switch is made for. Check that the connector suits your wiring, as it fits without cutting or splicing. If you need to match a part number, the Interchange Part Number is 1646800191.

Frequently Asked Questions

Which vehicles does it fit?
It fits the Mercedes-Benz W164 ML and GL from 2006-2011.

Does it need any wiring changes?
The connector fits without cutting or splicing the wiring.

What is the switch made of?
The switch is made of ABS.

What is in the package?
The package has one glove box switch.

Key Features

• Gray Finish — The handle comes in a gray color to suit the glove box area.
• Plastic Construction — The handle is made of plastic.
• Compact Measurements — It measures approx. 8.9 x 3.9 cm (3.4 x 1.5 inch) (LxW).
• Aftermarket Replacement — It is an aftermarket replacement item, not a genuine part.
• Model Fitment — It is made to fit the Jimny Vitara Grand Vitara.

Product Specifications

• Color: Gray
• Material: Plastic
• Size: approx. 8.9 x 3.9 cm (3.4 x 1.5 inch) (LxW)
• Compatible models: Jimny Vitara Grand Vitara; Grand Vitara 2000–2016
• Item included: 1 x Glove Box Lock
• Part number: 7343076811P4Z

What It Is / How It Works

This is a car glove box lock latch handle, a replacement part for the glove box lock position on a compatible vehicle. It is made of plastic, comes in gray, and measures approx. 8.9 x 3.9 cm (3.4 x 1.5 inch) (LxW). It is an aftermarket replacement item, not a genuine part.

Who It's For / Use Cases

Car owners who need a replacement glove box latch handle for a compatible vehicle are the main buyers for this type of part. It suits drivers who have a worn, loose or broken glove box lock handle and want a like-for-like replacement with a matching gray finish.

How to Use / Care

1. Use it to replace the glove box lock latch handle on a compatible car.

How to Choose

Start with the vehicle. Confirm the model in the Compatible models row of Product Specifications before buying. Next, compare the approx. 8.9 x 3.9 cm (3.4 x 1.5 inch) (LxW) size with the handle you are replacing, and match the gray color if you want the new part to blend with the existing glove box.

Frequently Asked Questions

Which vehicles is it made for?
It is made to fit the Jimny Vitara Grand Vitara. The Compatible models row in Product Specifications gives the same model names.

What material is the handle made of?
The handle is made of plastic, and the color is gray.

What are the dimensions?
It measures approx. 8.9 x 3.9 cm (3.4 x 1.5 inch) (LxW). The package includes 1 x Glove Box Lock.

Is this a genuine part?
No. It is an aftermarket replacement item, not a genuine part.

What is the part number?
The part number is 7343076811P4Z, and it appears in the Part number row of Product Specifications.

Key Features

• Storage Box Clip — It is made as a clip for a dashboard storage box, so it holds that box on the car dashboard.

Product Specifications

• Country/Region of Manufacture: China
• Special Features: Dashboard Storage Box Clip

What It Is / How It Works

This car dashboard clip is a small fastener for car interiors, made for a dashboard storage box. Clips of this kind keep a storage box fixed to the dashboard area instead of letting it shift around the cabin.

Who It's For / Use Cases

Dashboard clips suit drivers who keep small storage boxes in the cabin and want them fixed on the dashboard rather than sliding around. They also suit anyone replacing a worn or missing dashboard fastener, since the job is to hold a box at one point on the dashboard.

How to Use / Care

1. Use it to hold a dashboard storage box in place.

How to Choose

Choose a dashboard clip by the point it needs to hold. Measure the mounting point on your dashboard and check that the clip's size and shape suit that spot. Think about the storage box or bracket it will carry, since a clip works best when its grip matches the object's edge. Select a clip made for car interiors so it fits the cabin layout you already have.

Frequently Asked Questions

What is this clip used for?
It is a car interior clip for a dashboard storage box, used to keep that box fixed on the dashboard.

How does a dashboard clip differ from a general clip?
A dashboard clip is shaped for the mounting points found on a car dashboard, while a general-purpose clip is made for wider household or workshop uses.

Should I check the fit before buying?
Measure the dashboard mounting point first and compare its size and shape with the clip before ordering.

What kind of storage box does it hold?
It is made for a dashboard storage box, so it suits small storage boxes that need a fixed position on the dashboard.

Key Features

• Mercedes W205 Fit — It fits the Mercedes Benz W205 C Class (2015-2021).
• Direct Connector Fit — It has the correct connector and needs no cutting or splicing.
• Replacement Switch — It is a replacement switch for the glove box.

Product Specifications

• Material: ABS
• Weight: 50 g (1.76 oz)
• Placement on Vehicle: Front
• Compatible models: Mercedes Benz W205 C Class (2015-2021); Mercedes Benz W253 GLC Class (2015-2022)
• Part number: 2056800098

What It Is / How It Works

This glove box switch is a replacement switch for the glove box of the Mercedes Benz W205 and W253. The package has one glove box switch, and only that item is included.

Who It's For / Use Cases

Glove box switches suit car owners who need a replacement switch for the glove box of a supported vehicle. They suit owners who want a part sized to match the original switch and who plan to fit the part with a local shop or their own tools.

How to Use / Care

1. If you are not sure how to install it, installation instructions can be requested, or a local auto repair shop can fit it.

How to Choose

Start by matching your car to the Compatible models row in Product Specifications, which lists the Mercedes Benz W205 C Class (2015-2021) and the W253 GLC Class (2015-2022). The ABS body and the 4.5 cm and 12 cm dimensions can help you judge whether the part matches the original.

Frequently Asked Questions

Which cars is this glove box switch for?
It fits the Mercedes Benz W205 C Class (2015-2021) and the Mercedes Benz W253 GLC Class (2015-2022).

What is the switch made of?
It is made of ABS.

What size and weight is it?
It measures 4.5 cm (1.77 in) and 12 cm (4.7 in), and it weighs 50 g (1.76 oz).

What is in the package?
The package has one glove box switch.

What if I am not sure how to install it?
Installation instructions can be requested, or a local auto repair shop can fit the switch.

Key Features

• Interior Trim Panel — Glove box covers are interior trim panels that finish the edge of the glove compartment on a dashboard.

What It Is / How It Works

This glove box cover is an interior trim panel for the glove compartment area of a vehicle dashboard. Trim pieces like this sit around the glove compartment opening and give the dashboard area a finished look once the panel is in place.

Who It's For / Use Cases

Owners replacing worn or damaged trim around the glove compartment will find a panel like this useful.

How to Use / Care

1. Use it to cover the glove box area of the dashboard.

How to Choose

Start with the vehicle. Compare the panel shape with your existing trim so the edges line up with the glove compartment opening.

Frequently Asked Questions

What colors are available?
It comes in black or red.

What is the product type?
It is an interior trim panel for the glove compartment area, sold as a cover for the glove box.

Key Features

• Transfer-Printed Carbon Finish — The surface has a transfer-printed carbon fiber finish or a rubber-oil painted finish.
• Left and Right Drive — It fits both left-hand drive and right-hand drive vehicles.
• Replacement Part — It is a replacement cover for the central console switch area.

Product Specifications

• Material: PC and ABS
• Surface: Transfer Printing Carbon Fiber/Painting with Rubber Oil
• Color: Piano Black, Silver, Carbon Fiber
• Weight: 84.4 g (3 oz)
• Interchange Part Number: A2056803407 A2056803307
• Compatible models: C Class W205 C200 C250 C300 C400 2014-2021; GLC Class W253 GLC260 GLC200 GLC300 2015-2021
• Placement on Vehicle: Front Central

What It Is / How It Works

This console armrest cover is a replacement switch-button cover for the central storage box in Mercedes Benz C Class W205 and GLC Class W253 vehicles. Console armrest covers like this one sit over the central storage area and hold the switch button panel in place.

Who It's For / Use Cases

Drivers who need a replacement console armrest cover for a central storage box usually want a part that matches the vehicle's model years and trim. Owners replacing a damaged or missing cover in the centre console area will find a dedicated replacement part easier to match than a general-purpose cover.

How to Use / Care

1. Use it to replace the console armrest cover over the central storage box.

How to Choose

Start with the vehicle model and model years, since console covers are sized to a specific interior. Replacement console covers are usually selected by matching the original part's shape and mounting position.

Frequently Asked Questions

Which vehicles does it fit?
It fits the C Class W205 (C200, C250, C300, C400, 2014-2021) and the GLC Class W253 (GLC260, GLC200, GLC300, 2015-2021).

Does it fit left-hand and right-hand drive cars?
It fits both left-hand drive and right-hand drive vehicles.

What is it made of?
It is made of PC and ABS, with a transfer-printed carbon fiber or rubber-oil painted surface.

What colors does it come in?
It comes in Piano Black, Silver, or Carbon Fiber.

What are its size and weight?
It has dimensions of 200 mm (7.9 in) and 48 mm (1.9 in) and weighs 84.4 g (3 oz).

Which part numbers does it cross-reference?
It lists interchange part numbers A2056803407 and A2056803307, which match the part numbers in its title.

Key Features

• Soft Synthetic Leather — The synthetic leather surface has a soft, smooth texture.
• Easy-Clean Surface — The synthetic leather surface is easy to clean.
• Direct Replacement Fit — It can directly replace an old or damaged armrest cover on the car's armrest box.

Product Specifications

• Material: ABS and synthetic leather
• Colour: Black
• Piece Count: 1 pc
• Part number: 92114FG000JC

What It Is / How It Works

This is a replacement center console lid, an armrest box cover for the center console of a Subaru Impreza. It is sold as one piece and is black, with a synthetic leather surface over an ABS body.

Who It's For / Use Cases

Armrest box covers suit drivers who need to replace an old or damaged lid on the center armrest. People who want the armrest area to look finished after wear often choose a replacement cover of this type.

How to Use / Care

1. Use it to replace the old or damaged center console lid on a compatible Subaru Impreza.

How to Choose

Start with the car's model and year range, since this lid is made for specific Subaru Impreza models. Confirm the car is an Impreza 2009-2011, Impreza GT 2009-2010 or Impreza WRX 2009-2014 before buying.

Frequently Asked Questions

Which Subaru models is it made for?
It is made for the Subaru Impreza 2009-2011, the Impreza GT 2009-2010 and the Impreza WRX 2009-2014.

What material is the cover made from?
It is made from ABS and synthetic leather. The synthetic leather surface has a soft, smooth texture.

Is the surface easy to clean?
The synthetic leather surface is easy to clean, and the cover is black.

Does fitting it need special tools?
Fitting does not require complicated steps or complex tools.

What does the pack contain?
The pack contains one armrest box cover. The part number is 92114FG000JC.

Key Features

• Lock Latch Handle — It works as the lock latch handle for the glove box lid.
• Lock Hole and Clip — It has a lock hole and a handle clip for the glove box lid.

Product Specifications

• Material: ABS

What It Is / How It Works

This is a glove box lock latch handle, a small interior car part for the lid of the glove box. It is for the Nissan March/Micra 2011-2018 and is made of ABS plastic.

Who It's For / Use Cases

Car owners who need a replacement glove box latch handle, or a spare for a worn lid lock, are the usual buyers for this kind of part. Parts shoppers who work on interior hardware for a single vehicle range also tend to look for a handle that matches the glove box lid they already have.

How to Use / Care

1. Use it as the glove box lock latch handle for the glove box lid.

How to Choose

Start with the vehicle. Match the model and year range to the Nissan March or Micra from 2011 to 2018 before choosing a handle. Choose this ABS build if you want the plastic material it is made from.

Frequently Asked Questions

Which vehicle is it for?
It is for the Nissan March/Micra 2011-2018.

What is it made of?
It is made of ABS plastic.

What does it do?
It works as the lock latch handle for the glove box lid, and it has a lock hole and a handle clip.

What should I match before buying?
Match the vehicle model and year first. Parts like this are usually matched by vehicle, then by how the handle sits on the lid.

Key Features

• Scratch-Resistant Surface — It is scratch resistant and wear-resistant, which helps protect the original car surface.
• Direct Placement — It is set directly onto the surface it is meant to cover.

Product Specifications

• Material: Silicone
• Installation method: Direct placement

What It Is / How It Works

This silicone pad is made to sit on the center control area of a car, where it helps protect the surface from scratches and everyday wear.

Silicone pads in general are used as protective layers on dashboards, consoles and other interior surfaces, where they add a soft barrier between the surface and everyday contact.

Who It's For / Use Cases

Car owners who want a protective layer on a center control area tend to look for a pad like this. People who keep a car interior tidy and want to limit scratches on a console may find it useful. It suits drivers who want to protect the original trim without changing the car.

How to Use / Care

1. Place the pad directly on the center control area it is meant to protect.
2. Use it to protect the center control surface from scratches and everyday wear.

How to Choose

Start by checking that the pad matches the center control area of the vehicle you own before you order. Consider how much of the surface you want covered and whether the pad sits flat where you plan to place it.

Frequently Asked Questions

What is the pad made of?
It is made of silicone.

Does it protect against scratches?
It is scratch resistant and wear-resistant, which helps protect the original car surface it covers.

How is the pad installed?
It is installed by direct placement onto the surface it is meant to cover.

Who makes the pad?
The brand is WE. SHE. U.

What is the pad used for?
It is used to protect the center control area of the car from scratches and everyday wear, and it is made of silicone.

Key Features

• ABS and Suede Build — The cover is made of ABS and suede, and the material is stated for the whole cover.

Product Specifications

• Material: ABS and suede
• Year: 2025+
• Compatible models: Tesla Model Y Juniper 2025+ 2024

What It Is / How It Works

This central control armrest box cover is a trim piece for the armrest storage box between the front seats of a car. It is made of ABS and suede. Armrest box covers are a simple way to change the look of the center console area without replacing the storage box itself.

Who It's For / Use Cases

Armrest box covers suit car owners who want to refresh the look of the center console with one simple accessory. They suit drivers who already use the armrest storage box daily and want a cover that sits over it neatly. They also suit anyone who wants an easy way to update the interior trim around the console.

How to Use / Care

1. Use it to cover the central control armrest box in the car.

How to Choose

Choose a cover by matching it to the shape of your armrest box and to your car model and year, since a cover has to sit over the box it is made for. Confirm the model and year match your vehicle before buying. Compare the material too: ABS is a rigid plastic that holds a moulded shape, while suede has a soft, matte surface that feels different to the touch.

Frequently Asked Questions

What is the cover made of?
It is made of ABS and suede. The material is stated for the whole cover, with no part-by-part split between the two.

Who is the brand?
The brand is NoEnName_Null.

What does the cover sit on?
It sits over a central control armrest box, the storage box between the front seats. Measure the box before ordering so the cover lines up with its edges.

What is the cover used for?
Use it to cover the central control armrest box in the car, which gives the console area a finished look.

Key Features

• Vehicle Fitment — It fits the VW Golf 7 MK7 for model years 2013-2017 and 2019.
• OEM Part Numbers — The OEM numbers are 5GG 864 298 A and 5GG 819 203.

Product Specifications

• Fitment: For Golf 7 MK7 2013-2017 2019
• OEM number: 5GG 864 298 A, 5GG 819 203
• Compatible models: VW Golf 7 MK7 2013/2014/2015/2016/2017/2019 5GG 864 298B
• Specification: 82V

What It Is / How It Works

A rear trim frame is an interior trim piece that surrounds a vehicle component such as an air vent outlet or a center armrest area. Trim frames cover the edges of these parts so the panel looks finished and sits flush with the surrounding interior.

Who It's For / Use Cases

Rear trim frames suit owners and technicians who are replacing a worn or damaged interior trim piece around an air vent outlet or armrest area. They also suit anyone restoring the finished look of a dash or console panel on a compatible vehicle.

How to Use / Care

1. Use it as an interior trim frame that fills the edge around the air vent outlet and center armrest area.

How to Choose

Start with the vehicle model and model year, since the fitment range decides whether the frame matches your car. Choose the frame that covers the same component area as the original trim.

Frequently Asked Questions

Which vehicles does it fit?
It fits the VW Golf 7 MK7 for model years 2013-2017 and 2019.

What OEM numbers does it carry?
The OEM numbers are 5GG 864 298 A and 5GG 819 203.

What does a rear trim frame cover?
A rear trim frame covers the edges around a vent outlet or armrest area so the interior panel looks finished.

Is it a replacement trim piece?
Trim frames are typically used to replace a worn or damaged interior trim piece around the same component area.

Key Features

• Land Rover Freelander 2 Fit — It fits the Land Rover Freelander 2 L359 (2006-2014).
• Direct Replacement Part — It is a direct replacement for the original armrest cap.

Product Specifications

• Material: ABS plastic
• Compatible models: Land Rover Freelander 2 L359, 2006-2014
• Placement on Vehicle: Front, Left or Right
• Piece Count: 1 pcs
• Part numbers: LR004573, LR007776

What It Is / How It Works

This seat armrest cap cover is a replacement trim piece for the armrest on a Land Rover Freelander 2.

Armrest cap covers are small trim pieces that fit over the screw cap of a car seat armrest, so the mounting screw stays hidden.

Who It's For / Use Cases

Armrest cap covers suit owners who need to replace a missing or worn screw cap on a car seat armrest. They suit anyone repairing interior trim on a vehicle with a matching armrest, and anyone who wants the trim to look complete after a repair.

How to Use / Care

1. Use it to cover the armrest screw cap on the seat armrest.

How to Choose

Start with the vehicle. Check the Compatible models row in Product Specifications against your Land Rover Freelander 2 before ordering. Choose by the position you need to cover, since the placement row lists front, left or right.

Frequently Asked Questions

Which vehicle is this armrest cap cover made for?
It fits the Land Rover Freelander 2 L359 (2006-2014). The Compatible models row in Product Specifications lists the same vehicle.

What material is it made of?
It is made of ABS plastic, as listed in the Material row of Product Specifications.

How many pieces come in a pack?
The pack holds 1 pcs, one cover per pack.

Which part numbers does it match?
The part numbers are LR004573 and LR007776, shown in the Part number row of Product Specifications.

Which position on the vehicle is it for?
The placement value is front, left or right, as listed in the Placement on Vehicle row of Product Specifications.

Key Features

• Top Cover Buckle — The central armrest box top cover is a lid part with a buckle.

Product Specifications

• BLack Big Clip: 5305126-p00
• Country/Region of Manufacture: CN
• Part number: 5305120-P00

What It Is / How It Works

This armrest box top cover is a lid part for the center armrest storage box. It is made for the Great Wall Pickup Wingle 3 and Wingle 5, 2009-2023, and it has a buckle.

Who It's For / Use Cases

Armrest box top covers suit owners of Great Wall pickups who need a replacement lid for the center armrest storage box. They are a practical choice for anyone whose armrest lid is cracked, loose or missing its buckle, and who would rather replace one lid part than the whole console.

How to Use / Care

1. Use it as a replacement top cover for the central armrest box.

How to Choose

Start with the vehicle. Armrest box top covers are model-specific, so match the Great Wall Wingle generation and year range to your truck before buying.

Frequently Asked Questions

What is the part number?
The part number is 5305120-P00.

Does the cover have a buckle?
Yes. The top cover is listed with a buckle, and it is a lid for the central armrest box.

Key Features

• Replacement Part — It is made as a replacement for the original armrest door pull handle panel trim.
• PC and ABS Build — It is made of PC and ABS with a rubberized coating on the surface.
• Left-Hand Drive Fit — It is made for left-hand drive BMW 5 Series cars.

Product Specifications

• Piece Count: 7 pcs
• Compatible models: BMW 5 Series F10/F11/F18 2010-2017
• Material: PC and ABS, rubberized coating
• Color: Beige, Oyster, Black, Gray, Moka, Red Brown, Carbon Fiber, Champagne

What It Is / How It Works

This 7-piece set is an LHD interior armrest door pull handle panel inside trim cover for BMW 5 Series F10, F11 and F18 cars.

Who It's For / Use Cases

Interior trim covers like this suit owners who want a replacement door pull handle panel for a left-hand drive BMW 5 Series and want the trim to match the cabin finish. Buyers working on a BMW 5 Series often start by confirming the driver side and the model before fitting trim parts.

How to Use / Care

1. Use the cover set on a left-hand drive BMW 5 Series F10, F11 or F18.
2. If you cannot fit the parts well yourself, re-adjust them or take them to a local professional repair shop to have them installed.

How to Choose

Start with fit: confirm the car is left-hand drive and matches the model and years listed under Compatible models in Product Specifications.

Frequently Asked Questions

How many pieces are in the set?
The set has 7 pieces.

Which BMW models does it fit?
It is made for the BMW 5 Series F10, F11 and F18 from 2010-2017. The title also lists the 520i, 523i, 525i, 528i and 535i engine codes.

Is it for left-hand drive cars?
It is made for left-hand drive BMW 5 Series cars, so the driver side is on the left in the car it fits.

What is the cover made of?
It is made of PC and ABS with a rubberized coating.

What colors are available?
The color options are Beige, Oyster, Black, Gray, Moka, Red Brown, Carbon Fiber and Champagne.

Key Features

• Carbon Fiber Look — The surface has a carbon fiber look, made by transfer printing and painting with rubber oil.
• Left and Right Drive — It fits both left-hand drive (LHD) and right-hand drive (RHD) vehicles.
• Trim Size — The piece measures 200 mm (7.9 in).
• Piece Weight — The piece weighs 84.4 g (3 oz).

Product Specifications

• Material: PC and ABS
• Surface Finish: Transfer Printing Carbon Fiber/Painting with Rubber Oil
• Weight: 84.4 g (3 oz)
• Placement on Vehicle: Front Central
• Interchange Part Number: A2056803407
• Vehicle Fit: C Class W205 (C200, C250, C300, C400), 2014-2021; GLC Class W253 (GLC260, GLC200, GLC300), 2015-2021

What It Is / How It Works

This central armrest box switch cover is a replacement trim piece for the console area of a Mercedes-Benz. It is made of PC and ABS with a carbon fiber look finish, and it fits the C Class W205 and GLC Class W253.

Who It's For / Use Cases

Replacement armrest trim pieces suit owners who want a matching finish on a worn or damaged central console cover. They suit people who prefer to replace a single trim part rather than the whole console, and anyone comparing the vehicle list before buying a replacement trim piece.

How to Use / Care

1. Use it as a replacement switch cover for the central armrest box in the console area.

How to Choose

Start with the vehicle. Compare your car's model, generation and build years with the Vehicle Fit row in Product Specifications.

Frequently Asked Questions

Which vehicles is it made for?
It fits the C Class W205 (C200, C250, C300, C400) from 2014-2021 and the GLC Class W253 (GLC260, GLC200, GLC300) from 2015-2021.

Does it fit left-hand and right-hand drive cars?
It fits both LHD and RHD vehicles. Compare your car's model and build years with the Vehicle Fit row before ordering.

What material is it made from?
It is made of PC and ABS, with a transfer-printed carbon fiber look finished with rubber oil.

What size is it?
The listed dimensions are 200 mm (7.9 in) and 48 mm (1.9 in), and it weighs 84.4 g (3 oz).

Key Features

• Leather Material — It is made of leather, so the cover has a leather surface.

Product Specifications

• Material: Leather

What It Is / How It Works

Armrest box covers are protective covers that sit over the lid of a vehicle armrest storage box. This leather cover is made for an armrest box in a vehicle interior.

Who It's For / Use Cases

Armrest box covers suit drivers and passengers who want a protective layer on the armrest lid of a vehicle. Owners who want the armrest area to match a leather interior may also find the surface a good fit.

How to Use / Care

1. Use it to protect the armrest box in the vehicle interior.

How to Choose

Start with fit: choose a cover that matches the armrest box it will sit on, since the armrest box shape decides how well any cover sits. If you want a leather surface, look for a leather cover, which is the material this product is made of. Leather suits buyers who prefer a natural material over plastic for interior trim. Match the cover to the armrest box you own before ordering.

Frequently Asked Questions

What is this cover made of?
It is made of leather, so the surface is leather.

What is it used for?
It is a leather cover for an armrest box in a vehicle interior.

Who is the brand?
The brand is NoEnName_Null.

Key Features

• Left-Hand Drive Fit — Specifically engineered for left-hand drive models, this latch clip is described as giving a snug fit that limits unwanted movement and rattling.
• Straightforward Installation — The design is described as allowing a straightforward installation to replace an old or damaged latch without professional assistance.
• Enhanced Console Security — A locking mechanism is described as enhancing the security of the center console.
• Black Finish — Finished in black, the armrest lock is described as complementing the interior of a car.

Product Specifications

• Type: Armrests
• Part Name: Console Latch Clip
• Material: Plastic
• Color: Black

What It Is / How It Works

This center console armrest lock is a console latch clip for the armrest box on BMW X1 F48 and X2 F39 vehicles. Latch clips of this type hold a center console lid closed so the storage box stays shut during regular driving. Replacement latches are commonly used when an original latch becomes worn, cracked, or missing.

Who It's For / Use Cases

Vehicle owners who need a replacement latch for a center console armrest lid will find this type of part relevant. It suits people whose console lid no longer stays closed, who want to restore a secure latch on a console box, or who prefer a simple swap-in part over a full console replacement. Anyone comparing latch parts for an armrest box can use the fitment and drive-side details in the specifications to narrow the choice.

How to Use / Care

1. Use this console latch clip as a replacement latch for the armrest box on the BMW models named in the product title.

How to Choose

Start with the vehicle. Match the BMW model and model year range to your car, and confirm the left-hand drive note against your vehicle's steering wheel side. Next, compare the material and color rows to your interior, keeping in mind that photos can look slightly different from the real item. Choose the part that matches your model and drive side first, since fit is the main selection factor for a replacement latch clip.

Frequently Asked Questions

Is this part made for left-hand drive vehicles?
Yes, the product information describes it as specifically engineered for left-hand drive models. The title also lists 2016-2019 LHD for the X2 F39 and 2014-2019 for the X1 F48.

What material is the console latch clip made from?
The item is listed with a plastic construction and a black color, with the finish described as complementing a car interior.

How many pieces are in the package?
The package is described as one console lock buckle, so one piece per order.

Does this product have a certification mark?
The product lists CCC certification in its specifications.

Why might the color look different from the photos?
The listing notes that the real color may be slightly different from the pictures shown on the website, due to factors such as monitor brightness and light brightness. The listing also allows for slight manual measurement deviation.

Key Features

• Wear-Resistant Plastic — The plastic construction is built to withstand daily wear.
• Original-Match Fit — It is manufactured to match OEM part number 8U1857131 and keeps the design elements for the Q3.
• Front Release Button Trim — It sits on the front glove box lock release button and enhances the style of the car's interior.

Product Specifications

• Compatible With: Q3 models from 2012 to 2014
• OEM Number: 8U1857131
• Size: 10 × 7 × 6 cm (3.9 × 2.76 × 2.36 in)

What It Is / How It Works

This is a glove box latch handle, a replacement interior part for Q3 models from 2012 to 2014.

Who It's For / Use Cases

Glove box latch handles suit owners who need to replace a worn or broken interior handle and want the original look back. They also suit anyone who keeps a vehicle's interior trim in good condition over time, because replacing one worn part at a time keeps the cabin looking consistent.

How to Use / Care

1. Use it to replace a worn or damaged glove box latch handle on a matching Q3 model.

How to Choose

When choosing a glove box latch handle, start with the vehicle. Confirm the model years listed in the Compatible With row in Product Specifications before ordering.

Frequently Asked Questions

Which vehicles does it fit?
It is designed for Q3 models from 2012 to 2014. The Compatible With row in Product Specifications lists those model years.

Is it an OEM replacement?
It is manufactured to match OEM part number 8U1857131 and keeps the design elements for the Q3.

What is it made of?
It is made of plastic that withstands daily wear and maintains the visual integrity of the car's interior.

How large is it?
It measures 10 × 7 × 6 cm (3.9 × 2.76 × 2.36 in).

How many come in a pack?
One glove box latch handle is included per pack.

Key Features

• Anti-Tear Feature — The anti-tear feature is meant to make the cover last longer.
• Anti-Scratch Properties — Finger nail or key scratches are less of a worry on the surface.
• Worn Armrest Cover — It covers a worn armrest and decorates the car interior.

Product Specifications

• Compatible With: VW Golf 4 MK4, Bora, Jetta (1998–2005)
• Year: 1998 1999 2000 2001 2002 2003 2004 2005
• Material: Suede Leather
• Color: Black with red/black/gray/white/blue stitching
• Weight: 280 g (9.9 oz)
• Item included: 2pcs/4pcs
• Condition: 100% new
• Notice: Four-door models only; not for 2- or 3-door vehicles

What It Is / How It Works

This is an armrest cover for VW Golf 4 MK4, Bora and Jetta cars from 1998 to 2005, made of suede leather.

Armrest covers are trim pieces that fit over the top of a car's armrest panel to refresh its look without replacing the whole panel.

Who It's For / Use Cases

Armrest covers suit owners of the listed VW models who want to refresh a worn armrest without replacing the whole panel. Drivers who want a simple way to change the look of an older interior often choose this kind of trim, especially on four-door models.

How to Use / Care

1. Fit the cover directly onto the armrest.
2. Use it to protect a worn armrest and decorate the car interior.

How to Choose

Start with the Compatible With row in Product Specifications and confirm your car is a four-door VW Golf 4 MK4, Bora or Jetta from the years listed in the Year row. Because the cover is made of suede leather, compare its look and feel with the trim already in your car before you decide.

Frequently Asked Questions

Which vehicles is it listed for?
The Compatible With row lists VW Golf 4 MK4, Bora and Jetta models from 1998 to 2005.

Does it fit two-door or three-door cars?
No. It is for four-door models only and is not for two- or three-door vehicles.

What is it made of?
It is made of suede leather and has an anti-tear feature.

How heavy is it?
It weighs 280 g (9.9 oz).

Key Features

• Plastic Construction — The cover is made of plastic, a lightweight material suited to a trim piece that sits on a glove box lock handle.
• Direct Replacement Design — It is designed to replace a broken or damaged glove box lock handle cover on a compatible vehicle.
• Single Piece Pack — Each order includes one piece.

Product Specifications

• Material: Plastic
• Color: Black, Beige, Grey
• Piece count: 1
• Fitment type: Direct Replacement
• Compatible models: For Captiva For Thailand 2007-2017; For Captiva For C140 2011-2018; For Captiva 4DR For Crossover 2011-2018; For Opel For Antara 2006-2017
• Part numbers: 95183126, 95183127

What It Is / How It Works

This glove box lock handle cover is a small replacement trim piece that fits over the lock handle area of a glove box. Glove box lock handle covers are typically sold to replace a cover that has cracked, worn through or gone missing, so the lock area looks finished and the handle is protected from the surrounding dashboard trim.

Who It's For / Use Cases

Glove box lock handle covers suit vehicle owners who have a cracked, damaged or missing cover on the glove box lock handle and want a replacement that fits the listed Captiva or Opel Antara models. They also suit anyone maintaining a dashboard interior who prefers to swap a single small trim part rather than replace the whole glove box assembly.

How to Use / Care

1. Use it to replace a broken or damaged glove box lock handle cover on a vehicle listed under Compatible models in Product Specifications.

How to Choose

Start with the vehicle. Match the model and year range to the Compatible models row in Product Specifications before ordering. Match the part number to the original cover where the page lists the part numbers.

Frequently Asked Questions

What is the cover made of?
It is made of plastic, which is the only material listed for this glove box lock handle cover.

Which colors are available?
The cover is available in Black, Beige and Grey, so you can choose the shade closest to your dashboard interior.

Which vehicles does it fit?
The Compatible models row in Product Specifications lists For Captiva For Thailand 2007-2017, For Captiva For C140 2011-2018, For Captiva 4DR For Crossover 2011-2018 and For Opel For Antara 2006-2017.

What are the part numbers?
The part numbers are 95183126 and 95183127, which are also shown in Product Specifications.

How many pieces come in one order?
One piece is included per order, and the fitment type is Direct Replacement for a broken or damaged cover.

Key Features

• Left-Hand Drive Only — It is made only for left-hand drive cars.
• Skoda Octavia Fit — It fits the Skoda Octavia 2007-2014, for cars with 4 doors only.

Product Specifications

• Material: Microfiber leather
• Fitment: Skoda Octavia 2007-2014, 4-door cars only
• Placement on Vehicle: Left
• Color: Beige, Black with Red line
• Weight: 500 g (17.6 oz)
• Packaging: 4 pieces, with adhesive and scraper

What It Is / How It Works

This is a left-hand drive door armrest panel cover for the Skoda Octavia, made of microfiber leather. Door panel covers are trim pieces that sit over the interior door panel where the armrest is.

Who It's For / Use Cases

Door panel covers suit owners of left-hand drive cars who want a fresh look for the interior door armrest area. They suit drivers who prefer a soft leather-style finish on the trim of a four-door car, and anyone replacing the trim on that same panel.

How to Use / Care

1. Use it to cover the door armrest panel on a left-hand drive Skoda Octavia.

How to Choose

Start with the side of the car, because this cover is made for left-hand drive models only. Next, confirm that your car is a four-door Skoda Octavia within the fitment shown in Product Specifications. Microfiber leather is the material to look for if you want a soft surface that is easy to wipe.

Frequently Asked Questions

Which side of the car is it for?
It is made only for left-hand drive cars, and its placement on the vehicle is left.

Which Skoda models does it fit?
It fits the Skoda Octavia 2007-2014, for cars with 4 doors only.

What is the cover made of?
It is made of microfiber leather. The surface is dustproof and easy to clean.

What colors does it come in?
It comes in Beige and Black with Red line.

What is in the pack?
The pack has 4 pieces, with adhesive and a scraper.

How much does it weigh?
It weighs 500 g (17.6 oz).

Key Features

• Two-Piece Set — It comes as 2 pieces in one set, so two catches are included in one order.

Product Specifications

• Piece Count: 2 pcs
• Material: ABS Plastic
• Color: Black
• Part numbers: 51161946513, 51161849472

What It Is / How It Works

This glove box lock catch is a direct replacement latch sold as a 2-piece set in black ABS plastic. It fits BMW 3 Series E30 (1982-1992), 5 Series E34 (1987-1995), 7 Series E23 (1977-1986) and Z3 models from 1996 to 2002.

Who It's For / Use Cases

Glove box lock catches suit car owners who need to replace a worn or broken glove box latch on an older BMW. They are a practical choice for owners who want a direct swap on a classic 3, 5, or 7 Series or a Z3 rather than repairing the original part.

How to Use / Care

1. Use it to replace a glove box lock catch on the BMW 3 Series, 5 Series, 7 Series or Z3 models named above.

How to Choose

Start with the BMW series and model years your car uses, then compare them with the fit details on this page. Matching the series and years is the main choice to make for a glove box latch, because the catch has to line up with your glove box.

Frequently Asked Questions

How many pieces come in one order?
It comes as 2 pieces in one set.

What is it made of?
It is made of black ABS plastic.

Which BMW models does it fit?
Its fit covers BMW 3 Series E30 (1982-1992), 5 Series E34 (1987-1995), 7 Series E23 (1977-1986) and Z3 models from 1996 to 2002.

Is it new?
It is brand new.

Key Features

• Front Passenger Side — It is designed for the front passenger side of the vehicle.
• Replacement Cover — It works as a replacement cover for a glove box handle, lock and latch.
• PC and ABS Build — It is made of PC and ABS plastic with a rubber oil-painted finish.

Product Specifications

• Material: PC&ABS with rubber oil painting
• Color: Original Black
• Intended Use: For Benz G Class W463 2004-2018
• Placement on Vehicle: Front Passenger Side
• Interchange Part Number: 4636804991,4636801513,4636801613
• Weight: 50 g (1.76 oz)

What It Is / How It Works

This glove box handle lock latch cover is a replacement part for the front passenger side of a Mercedes-Benz G Class W463 from 2004 to 2018. It is made of PC and ABS plastic with a rubber oil-painted finish in Original Black.

Who It's For / Use Cases

Owners who are replacing a worn or missing passenger side glove box handle cover on this type of vehicle are the usual buyers. Drivers who want the trim around the glove box to look like the original factory part will find this type of replacement cover suitable.

How to Use / Care

1. Use the cover on either left-hand drive or right-hand drive cars.
2. If you cannot replace the part well yourself, re-adjust it or take it to a local professional repair store for installation.

How to Choose

Start with the vehicle and the side. This cover is for the front passenger side of a Mercedes-Benz G Class W463 from 2004 to 2018, so confirm that your vehicle falls in that range. Next, compare the interchange part numbers in Product Specifications with the number on your existing part. Plastic trim covers of this type are usually matched by shape, color and finish, so compare the Original Black color with the surrounding trim before you buy.

Frequently Asked Questions

Which side of the car is this cover for?
It is designed for the front passenger side of the vehicle.

Which vehicle is it made for?
It is made for the Benz G Class W463 from 2004 to 2018. The Intended Use row in Product Specifications gives the same range.

Can it be used on left-hand drive and right-hand drive cars?
Both left-hand drive and right-hand drive cars can use it. It is placed on the front passenger side.

What is the cover made of?
It is made of PC and ABS plastic with a rubber oil-painted finish. The Material row in Product Specifications lists the same materials.

What if I cannot fit it myself?
You can re-adjust it or take it to a local professional repair store to have it installed.

Key Features

• ABS Plastic Build — The latch is made from ABS, a rigid plastic commonly used for interior vehicle parts that open and close often.
• Front Right Placement — It is designed for the front right side of the vehicle.

Product Specifications

• Material: ABS
• Piece Count: 1 pc
• Placement on Vehicle: Front Right Side

What It Is / How It Works

This glove box lock latch is a replacement catch for the glove box lid, sold as a single ABS piece for the front right side of a Volkswagen VW Polo from 2011-2018.

Who It's For / Use Cases

Glove box lid latches suit owners who need to replace a worn or broken catch that no longer holds the lid closed. Parts buyers and mechanics who handle interior trim repairs on this type of vehicle often look for a direct replacement latch of this kind.

How to Use / Care

1. Use it to replace the glove box lid catch on a compatible Volkswagen VW Polo.

How to Choose

Start by confirming the mounting side, since this latch is designed for the front right side of the vehicle. Next, consider the material: ABS plastic is a common choice for glove box catches because it is rigid and holds up to repeated use. Match the replacement to the vehicle model years you drive so the lid catch lines up with the existing glove box opening.

Frequently Asked Questions

What material is the glove box latch made from?
It is made from ABS plastic. ABS is a rigid plastic often used for interior vehicle parts that are opened and closed frequently.

Which vehicle is it designed for?
It is a replacement for the Volkswagen VW Polo from 2011-2018 and is designed for the front right side of the vehicle.

How many pieces are in one order?
Each order includes 1 piece, so one latch is supplied per purchase.

Is this a lock latch or a handle clip?
It is a glove box lock latch with a lid handle clip design, intended to replace the catch that holds the glove box lid closed.

Key Features

• Vehicle Fit — It is made for Grand Vitara models from 2000 to 2016, and it also fits Jimny and Vitara models.
• Original-Spec Fit — It is made to original factory specifications so it lines up with the original part.
• Plastic Construction — The handle body is made of plastic.

Product Specifications

• Compatible models: Fits Jimny, Vitara, Grand Vitara models; Grand Vitara 2000–2016
• Material: Plastic
• Color: Gray
• Size: Approx. 8.9 x 3.9 cm
• Package Contents: 1 x Glove Box Lock Latch Handle
• Part type: Aftermarket replacement part, not a genuine OEM product
• Part number: 7343076811P4Z

What It Is / How It Works

This car glove box lock latch handle is a replacement part for the glove box on Grand Vitara vehicles. It is made to original factory specifications so it fits in place of the original part.

Who It's For / Use Cases

Drivers who need to replace a worn or broken glove box latch handle on a Grand Vitara, and who want a handle that matches the original factory fit, are the typical buyers for this type of part. Repair shops and parts counters that handle interior hardware for these models also buy replacement latch handles for customers.

How to Use / Care

1. Use the handle for daily opening and closing of the glove box, where it is intended for stable performance and high reliability over long-term daily use.

How to Choose

Start by confirming that your vehicle is a Grand Vitara from 2000 to 2016, or a model listed under Compatible models in Product Specifications.

Frequently Asked Questions

Is this an original manufacturer part?
No. It is an aftermarket replacement part, not a genuine OEM product, but it is made to original factory specifications for a fit with the original part.

Which vehicles does it fit?
It is made for Grand Vitara models from 2000 to 2016, and the fitment details also list Jimny and Vitara models.

What size is the handle?
It measures approximately 8.9 x 3.9 cm, which is 3.4 x 1.5 inches (length by width).

What is in the package?
The package contains 1 glove box lock latch handle.

Does it need complicated modifications to fit?
No complicated modifications are required for this handle.