Key Features

• Two-Piece Set — This set has 2 pieces.
• PVC Material — The cover is made from PVC, a plastic material.
• Measured Size — Each cover measures 18.2 × 5.8 cm (7.2 × 2.3 in).
• Right and Left Positions — The cover is designed for the right and left side positions.

Product Specifications

• Material: PVC
• Piece Count: 2 pcs
• Size: 18.2 × 5.8 cm (7.2 × 2.3 in)
• Auto Part Position: Right & left

What It Is / How It Works

This car rearview mirror rain cover is a two-piece accessory made from PVC and measuring 18.2 × 5.8 cm (7.2 × 2.3 in). Rearview mirror rain covers are a category of small car accessories that fit over the mirror area to shield it from weather during driving or parking.

Who It's For / Use Cases

Car owners who want a simple accessory for the rearview mirror area often look at mirror rain covers. Buyers who want to compare the mirror area on their vehicle with a stated measurement will find the listed dimensions useful before ordering.

How to Use / Care

1. Use this cover on the rearview mirror area it is designed for, on the right or left side of the vehicle.
2. Compare the stated measurements with your mirror area before you decide which cover fits your needs.

How to Choose

Start with the side you need, since this listing covers right and left positions. Next, compare the measured size with the mirror area on your vehicle. The listing notes that slight measurement errors of 1–3 mm are normal, so leave a little room when you compare. Rain covers for mirrors are usually chosen by fit and material, so check that the PVC construction suits your preference.

Frequently Asked Questions

Which side of the car does this cover suit?
The listing gives the position as right and left, so the cover is offered for both side positions of the vehicle.

How many pieces come in a set?
Each set has 2 pieces. Each cover measures 18.2 × 5.8 cm (7.2 × 2.3 in), so check that size against your mirror area.

Which vehicles does it suit?
The listing describes the applicable models as all models, and the title says it is for most car models. Compare the stated measurements with your mirror area before ordering.

Why might the color look different from my expectations?
The listing notes that color may look slightly different due to the monitor, camera, or other factors, so the actual product is the reference. Measurements may also vary by 1–3 mm.

Key Features

• Model Coverage — Fits Volvo S60, V60, S80, V40, and V70 within the year ranges shown in the compatibility list.
• Rearview Mirror Housing — A rearview mirror cover frame holder that mounts over the mirror housing.
• VIN Check Note — The seller asks buyers to send the VIN number before ordering so the part can be checked against the vehicle.

Product Specifications

• Type: Mirror & Covers
• Item: Rearview Mirror Cover Frame Holder

What It Is / How It Works

This rearview mirror cover frame holder is an exterior trim piece that fits over the mirror housing on certain Volvo cars. It is made for the S60, V60, S80, V40, and V70 within the year ranges shown in the compatibility list.

Who It's For / Use Cases

This cover frame holder suits owners of the listed Volvo models who need to replace or cover the rearview mirror housing. It also suits buyers who want the part checked against their vehicle before ordering, since the seller asks for the VIN number for that check.

How to Use / Care

1. Confirm the vehicle matches one of the listed Volvo models and year ranges.
2. Send the VIN number to the seller before placing the order so the part can be checked for fit.
3. Fit the cover frame holder over the rearview mirror housing.

How to Choose

Choose by matching the vehicle model and year to the compatibility list, then confirm the part with the seller using the VIN number. Buyers who are unsure of the exact fit should complete the VIN check before ordering.

Frequently Asked Questions

Which Volvo models does this rearview mirror cover frame holder fit?
It is listed for the Volvo S60 2011–2018, V60 2011–2018, S80 2012–2016, V40 2013–2019, and V70 2012–2014.

What is this part?
It is a rearview mirror cover frame holder that fits over the mirror housing.

Does it carry a certification mark?
Yes, it carries an ECE certification mark.

How can I check that it fits my car?
Send the VIN number to the seller before ordering so the part can be checked against the vehicle.

Where can I find the full compatibility list?
The full model and year list is shown in the Product Specifications under Compatible With.

Key Features

• Vehicle Model Fit — It fits the 2011–2018 VOLVO S60 and V60 models.
• Cross Country Fit — It fits the S60 Cross Country and V60 Cross Country, including the Inscription trim.
• Carbon Mirror Cover — It is a carbon side mirror cover that goes over the rearview mirror.

Product Specifications

• Material: ABS
• Model Year: 2011–2018
• Compatible models: For 2011–2018 VOLVO S60, S60 Cross Country Inscription, V60, V60 Cross Country
• Part numbers: 31402628, 31402636

What It Is / How It Works

This is a carbon side mirror cover, a rearview mirror cap for the VOLVO S60 and V60 from 2011 to 2018. It goes over the outside mirror housing on the car door.

Who It's For / Use Cases

Side mirror covers suit owners of 2011 to 2018 Volvo S60 and V60 models who want a replacement cap for the outside mirror. They suit drivers who want the exterior trim to match the model year and body style of the car they drive.

How to Use / Care

1. Use it as a rearview mirror cap on a matching Volvo S60 or V60 from 2011 to 2018.
2. Match the model name and model year shown in Product Specifications before you use the cover.

How to Choose

Start with the vehicle. Match the model name, the body style such as Cross Country, and the model year in Product Specifications. Two part numbers are given, so pick the one that corresponds to the mirror cover you are replacing.

Frequently Asked Questions

Which VOLVO models does it fit?
It fits the 2011–2018 VOLVO S60 and V60, including the S60 Cross Country and V60 Cross Country, Inscription trim.

What is it made of?
It is made of ABS.

What are the part numbers?
The part numbers are 31402628 and 31402636.

Does it carry a certification?
It carries the ECE certification mark.

Key Features

• ABS Housing — The housing is made of ABS, a rigid plastic used for exterior mirror covers.
• Matt Black Finish — The cover comes in a matt black color that matches the original mirror housing finish.
• Wear-Resistant Build — The material is wear-resistant and non-deformable, helping the housing keep its shape over time.
• Direct Installation — The housing installs directly on the exterior rearview mirror without extra adapters.
• Right Side Fit — This is the right side mirror housing for 207 Hatchback, Estate and Van models from 07/2006 to 05/2015.

Product Specifications

• Color: Matt black
• Material: ABS
• Size: 20.5 × 21 × 8 cm (8.1 × 8.3 × 3.15 in)
• OEM Number: 9680194977 968019493F 232635040
• Installation Location: Exterior rearview mirror
• How to Install: Direct installation
• Vehicle Fitment: For 207 Hatchback, Estate & Van 07/2006-05/2015

What It Is / How It Works

This is a right side exterior rearview mirror housing for 207 Hatchback, Estate and Van models built from 07/2006 to 05/2015. It is a replacement cover made of ABS in matt black, sized 20.5 × 21 × 8 cm. The housing installs directly on the exterior rearview mirror and is supplied as one reversing mirror housing.

Who It's For / Use Cases

This housing suits owners of 207 Hatchback, Estate and Van models from 07/2006 to 05/2015 who need to replace a damaged or missing right side mirror cover. It is also for buyers who want a matt black ABS housing that installs directly without adapters. Check the OEM number and part photos before ordering to confirm the part matches your vehicle.

How to Use / Care

1. Confirm the OEM number and part photos match your vehicle before installation.
2. Install the housing directly on the exterior rearview mirror.
3. Use the housing as a quick and easy replacement part.
4. Keep the ABS housing clean and free of impact to maintain its wear-resistant, non-deformable finish.

How to Choose

Choose this right side housing when your vehicle is a 207 Hatchback, Estate or Van from 07/2006 to 05/2015 and you need a matt black ABS replacement. Match the OEM number 9680194977, 968019493F or 232635040 to your existing part, and confirm the right side position. The housing is not a universal fit, so verify the part number and photos before ordering.

Frequently Asked Questions

What vehicle does this mirror housing fit?
It fits 207 Hatchback, Estate and Van models from 07/2006 to 05/2015. It is not a universal part, so confirm your vehicle matches this range.

What material is the housing made of?
The housing is made of ABS, a rigid plastic, and comes in a matt black finish.

How is the housing installed?
It installs directly on the exterior rearview mirror without extra adapters. Confirm the OEM number and part photos before fitting.

What are the dimensions of the housing?
The housing measures 20.5 × 21 × 8 cm (8.1 × 8.3 × 3.15 in). Manual measurement may have slight deviations.

What is included with the purchase?
The purchase includes one reversing mirror housing. No other parts are included.

Will the color match my existing mirror?
The housing is matt black. Monitor brightness and lighting can make the actual color appear slightly different from the images, so check the part number and photos to confirm it suits your needs.

Key Features

• Golf 7 Model Years — It is for Volkswagen Golf 7 (MK7) cars in the 2013-2020 model years.
• Outside Housing Cover — Side mirror caps cover the housing of the outside mirror on the car, leaving the mirror unit in place.

Product Specifications

• Model Year: 2013-2020; Volkswagen VW Golf 7 MK7 7.5 GTI R GTE GTD 2013–2020

What It Is / How It Works

This rearview mirror cover is a side mirror cap for the outside mirror housing of a Volkswagen Golf 7 (MK7 7.5 GTI R GTE GTD). It is for the 2013-2020 model years. Side mirror caps are covers for the housing and do not replace the mirror itself or its adjustment parts.

Who It's For / Use Cases

Side mirror caps suit owners who want to update the look of the outside mirror area without replacing the mirror assembly. They suit drivers who want a simple cover for the housing rather than a new mirror, and owners who prefer a change that stays on the outside of the car.

How to Use / Care

1. Use it to cover the side mirror housing on the car.

How to Choose

When choosing a side mirror cap, start with the car. Match the model year and generation to the Golf 7 (MK7 7.5 GTI R GTE GTD) listing and to the 2013-2020 range shown in Specifications. Pick a cover for the outside housing if you want a cosmetic change, since the cap does not replace the mirror itself.

Frequently Asked Questions

Does it replace the mirror?
No. It is a cover for the housing and does not replace the mirror itself or its adjustment parts.

How do I check that my car matches?
Compare your car's model year with the 2013-2020 range in the Model Year row under Specifications, and confirm your car is a Golf 7 generation before ordering.

Does it cover the whole side mirror?
It covers the housing area of the side mirror. It is a cover for that area, not a full mirror replacement.

Key Features

• Glossy Surface — The cover has a glossy surface that gives the mirror housing a clean, reflective look.
• Carbon Fiber Look — A carbon fiber color option lets you match or change the trim style of the mirror housing.
• Black Finish — A black color option is also available for a darker, understated look.
• ABS Plastic Shell — The shell is made of ABS plastic, a hard plastic commonly used for automotive trim covers.
• 3M Tape Backing — The back of the cover comes with 3M tape for attaching it to the mirror housing.

Product Specifications

• Type: Mirror & Covers
• Material: ABS Plastic
• Color: Carbon Fiber, Black
• Attachment: 3M tape on the back

What It Is / How It Works

This is a rearview mirror protective cover, a shell that fits over the mirror housing on a car. It is made of ABS plastic and comes in carbon fiber or black, with a glossy surface and 3M tape on the back for attaching it to the housing.

Who It's For / Use Cases

Mirror covers like this suit drivers who want to change the look of the mirror housing or cover scuffs on the original shell. They are also a simple way to add a carbon fiber or black accent to the exterior trim. Because fit varies by car, check the shape and size of your mirror housing before buying.

How to Use / Care

1. Clean the surface where you want to stick the cover, and keep it dry and clean.
2. Tear off the tape and press the cover tightly so it sits in place.
3. Press hard, especially on the edges, for at least 2 minutes after installing.
4. In cold weather, use a hair dryer with hot air to help the tape bond.
5. Keep the cover dry for at least 72 hours after installing so it does not fall off.

How to Choose

Choose carbon fiber for a textured, sporty look or black for a plain dark finish. Check that the cover shape matches your mirror housing before buying, since fit depends on the car. If you are unsure, contact the seller with your car details before ordering.

Frequently Asked Questions

What is this cover made of?
It is made of ABS plastic, a hard plastic used for automotive trim parts.

What colors are available?
The cover comes in carbon fiber and black.

How does the cover attach?
The back of the cover comes with 3M tape. Clean the surface, tear off the tape, and press the cover tightly onto the mirror housing.

How long should I keep it dry after installing?
Keep the cover dry for at least 72 hours after installing so the tape holds and the cover does not fall off.

What should I do if the weather is cold during installation?
Use a hair dryer with hot air to warm the tape so it bonds better.

Will this cover fit my car?
Fit depends on the shape and size of your mirror housing. Check whether this item can fit on your car before purchasing, and contact the seller with your car details if you are unsure.

Key Features

• Two-Piece Set — Each set contains two rear view mirror shell covers, one for each side of the vehicle.
• ABS Plastic Build — The covers are made of ABS plastic, a rigid material used for exterior trim parts.
• Scratch and Wear Resistant — The ABS material is anti-scratch, wear-resistant and non-aging, so the finish holds up without fading.
• Self-Adhesive Fit — The covers attach with self-adhesive backing, so installation does not require drilling or damaging original car parts.
• Mirror Protection — The shell covers shield the side mirrors from dirt, scratches and other external damage.

Product Specifications

• Piece Count: 2Pcs/set
• Material: ABS Plastic
• Installation Method: self-adhesive
• Installation Position: front, left, right
• Compatible Models: Tesla Model 3 2019-2023; Tesla Model Y 2019-2024

What It Is / How It Works

This is a set of two side rear view mirror shell covers for Tesla Model 3 and Model Y vehicles. The covers fit over the existing mirror housings as exterior trim, adding a finished look while shielding the mirror caps from dirt and scratches. They are made of ABS plastic and attach with self-adhesive backing.

Who It's For / Use Cases

These mirror covers suit Tesla Model 3 and Model Y owners who want to protect the side mirror housings from everyday road debris or refresh the exterior look. They are also a practical choice for anyone who prefers a non-destructive upgrade that does not require drilling or permanent modification.

How to Use / Care

1. Clean the original mirror position before attaching the cover.
2. Peel the self-adhesive backing and stick the cover directly onto the mirror housing.
3. Press the cover firmly to secure it in place.
4. Repeat on the other side mirror.

How to Choose

Check that your vehicle is a Tesla Model 3 (2019-2023) or Model Y (2019-2024) before ordering. Confirm you want a two-piece set for both side mirrors. Consider the self-adhesive attachment if you prefer a non-destructive installation that does not damage original car parts.

Frequently Asked Questions

Which Tesla models do these mirror covers fit?
They are designed for Tesla Model 3 (2019-2023) and Tesla Model Y (2019-2024). Check the Product Specifications section for the full compatibility details.

How many covers are included in one set?
Each set includes two rear view mirror shell covers, one for each side of the vehicle.

What material are the covers made of?
The covers are made of ABS plastic, which is anti-scratch, wear-resistant and non-aging.

How do I install the mirror covers?
Clean the original mirror position, peel the self-adhesive backing, and stick the cover directly onto the housing. The installation is non-destructive and does not damage original car parts.

Will these covers protect my mirrors from damage?
The shell covers shield the side mirrors from dirt, scratches and other external damage.

Key Features

• Clip-On Installation — It is a clip-on style cover that replaces the original mirror cover.
• Mirror Protection — It can help protect the rear view mirror from damage.
• Sold as a Pair — It comes as a pair, a replacement for an old or damaged cover.
• Styled Exterior Look — It adds a stylish decor to the car's exterior.

Product Specifications

• Color: Glossy Black
• Material: ABS Plastic
• Compatible models: Renault Megane MK3 2008-2015; Renault Megane 3 MK3 III 2008–2015

What It Is / How It Works

This is a door wing rearview mirror cover, a replacement cap for the outer mirror housing. It fits the Renault Megane MK3 (2008-2015). Mirror covers of this type sit over the outer mirror housing as a cap and are chosen to match the car's existing mirror shape.

Who It's For / Use Cases

Mirror covers like this suit drivers who want to replace a worn or damaged outer mirror cap with a matching black piece. They suit owners of a Renault Megane MK3 who want the door mirror housing to look finished, and anyone who prefers a clip-on cap that can be swapped without tools in general terms.

How to Use / Care

1. Use it as a replacement cover for the rearview mirror on a Renault Megane MK3.

How to Choose

Start with the vehicle. Confirm your car is a Renault Megane MK3 and that its model year falls within 2008-2015, using the Compatible models row in Product Specifications. Next, match the finish: the cover is glossy black, so it suits a car whose door mirrors are black. Finally, check that the existing cover is the clip-on style you are replacing, since this cover is made for that style of installation.

Frequently Asked Questions

Which vehicle does this cover fit?
It fits the Renault Megane MK3 from 2008 to 2015. The Compatible models row in Product Specifications gives the same range.

How is the cover installed?
You remove the existing cover and put this one on in its place. It is a clip-on style cover, so no separate fixing parts are needed for the fitting.

What material is it made of?
It is made of ABS plastic in a glossy black finish.

Is it sold as a single cover or a pair?
It comes as a pair, and it can replace an old or damaged cover.

Does the cover protect the mirror?
It can help protect the rear view mirror from damage. It also gives the outer mirror a stylish decor.

Key Features

• 360-Degree Adjustable — The mirror head rotates a full 360 degrees so you can angle it toward the blind spot you want to watch.
• Convex Wide Angle — A convex surface widens the field of view so drivers can observe more of the area behind and beside the vehicle.
• Sticker-Backed Mounting — The back carries a sticker that attaches directly to the rearview mirror for convenient mounting.
• Fits Many Mirror Shapes — The mirror can be installed on car rearview mirrors of different shapes and materials.
• Durable Build — Made of durable materials that can withstand daily wear and tear.

Product Specifications

• Type: Mirror & Covers
• Material: PVC
• Color: Black, Silver, White
• Size: 10 × 10 × 5 cm (3.9 × 3.9 × 1.97 in)
• Weight: 80 g
• Auto Part Position: Right & left

What It Is / How It Works

This car blind spot mirror is a rimless convex mirror that mounts on the side rearview mirror to widen the driver's view. It rotates a full 360 degrees so the angle can be set toward the area you want to watch, and the back carries a sticker for direct attachment to the mirror.

Who It's For / Use Cases

Blind spot mirrors suit drivers who want a wider view of the area beside and behind the vehicle. They are useful for daily city driving, highway driving, reversing into parking spaces, lane changing, and driving on narrow roads. Beginner drivers and driving instructors may also find them helpful for judging vehicle distance.

How to Use / Care

1. Read the product size on the details page carefully before purchasing.
2. Attach the mirror to the car rearview mirror using the sticker on the back.
3. Adjust the 360-degree head to the angle you want.
4. Use it for daily city driving, highway driving, reversing into parking spaces, lane changing, and driving on narrow roads.

How to Choose

Check the size of the mirror against the space available on your side rearview mirror before ordering, since the size is measured by hand and may have some deviation. Consider the color that matches your vehicle, and whether you want a mirror for the left side, the right side, or both.

Frequently Asked Questions

What material is the mirror made of?
The mirror is made of PVC.

What size is the mirror?
The size is 10 × 10 × 5 cm (3.9 × 3.9 × 1.97 in). The size is measured by hand, so there may be some deviation that does not affect use.

How is the mirror attached?
The back has a sticker that attaches directly to the rearview mirror.

Can it be installed on different mirror shapes?
It can be installed on car rearview mirrors of different shapes and materials.

What colors are available?
The mirror comes in black, silver, and white.

Key Features

• ABS Construction — The cover is made of ABS plastic, a hard thermoplastic that resists everyday scuffs and impacts.
• Glossy Black Finish — The glossy black surface gives the mirror housing a deep, reflective look.
• Model 3 Fitment — Designed for 2017–2021 Tesla Model 3 vehicles, this rearview mirror cover matches the horn-style mirror housing.
• VIN Verification — The seller asks buyers to provide the VIN number before ordering so the part can be checked against the vehicle.

Product Specifications

• Material: ABS
• Color: Black
• Model Year: 2017–2021

What It Is / How It Works

This rearview mirror cover is an ABS plastic housing piece for the side mirror of a 2017–2021 Tesla Model 3. It is finished in glossy black and carries a CE mark. The cover is designed for the horn-style mirror housing used on those model years.

Who It's For / Use Cases

This cover suits owners of a 2017–2021 Tesla Model 3 who want to replace a damaged or worn side mirror housing with a glossy black ABS piece. It is also for drivers who prefer a dark, reflective finish on the mirror housing. Because fitment depends on the exact vehicle configuration, buyers should confirm compatibility with the seller using their VIN before ordering.

How to Use / Care

1. Confirm the cover is intended for the side mirror housing of a 2017–2021 Tesla Model 3.
2. Provide the VIN number to the seller before ordering so the part can be checked against the vehicle.
3. Match the glossy black finish to the existing mirror housing on the vehicle.
4. Verify that the ABS cover is the correct rearview mirror cover for the horn-style mirror on the vehicle.

How to Choose

Choose this cover when the vehicle is a 2017–2021 Tesla Model 3 and the mirror housing is the horn-style type. Check that the glossy black ABS finish matches the look you want. Before ordering, send the VIN to the seller so the part can be verified against the specific vehicle.

Frequently Asked Questions

What material is the cover made of?
The cover is made of ABS plastic, a hard thermoplastic used in many automotive trim parts.

What color is the cover?
It is glossy black, giving the mirror housing a dark, reflective appearance.

Does the cover have any certification?
The cover carries a CE mark, indicating conformity with applicable European requirements.

Which vehicles is this cover designed for?
It is designed for 2017–2021 Tesla Model 3 vehicles with the horn-style side mirror housing.

How can I confirm the cover fits my car?
Provide your VIN number to the seller before ordering so the part can be checked against your specific vehicle.

Key Features

• Electric Adjustment — The mirror glass can be adjusted electrically.
• Amber LED Light — It has an amber LED light for the turn signal.
• ABS Housing — The housing is made of ABS plastic.

Product Specifications

• Vehicle listing: Kia Sportage R 2011-2016
• Light type: Amber LED light
• Installation position: Right, left
• Material: ABS
• Color: Black, white

What It Is / How It Works

A rear view mirror is a side-mounted mirror unit that gives the driver a view behind the vehicle. Replacement units of this type are usually supplied as a mirror glass and housing assembly with a mounting base.

Who It's For / Use Cases

Rear view mirror units suit drivers who need a replacement side mirror for a listed vehicle. Electrically adjustable, folding and heated mirror units suit drivers who want those functions on a replacement side mirror. Repair shops that fit side mirrors use this type of unit for the same job.

How to Use / Care

1. Use it as the side rear view mirror on the listed Kia Sportage R 2011-2016.
2. Use the electric adjustment to set the mirror glass angle.
3. Use the fold function to move the mirror housing.

How to Choose

Start with the vehicle listing, since the mirror should match the listed model and the side you need, right or left.

Mirror units of this type are commonly chosen by side and by the functions a driver wants on the replacement, so matching those two points narrows the choice quickly.

Frequently Asked Questions

What is the housing made of?
The housing is made of ABS plastic.

Does it carry a certification mark?
It carries the CE mark.

Key Features

• Heated Mirror Glass — The side mirror lens glass is made with a heating function, which helps clear mist and frost from the mirror surface in cold or damp weather.

Product Specifications

• Type: Mirror & Covers
• Vehicle Fitment: Mitsubishi Triton L200 2019-2023
• Function: Heated reflective lens glass

What It Is / How It Works

These are replacement side mirror lenses for the Mitsubishi Triton L200, covering model years 2019 to 2023. Each lens is a reflective glass panel with a built-in heating function, designed to fit the side mirror housing of the listed truck. The set is intended for drivers who need to restore or replace the mirror glass on their vehicle.

Who It's For / Use Cases

These mirror lenses suit Mitsubishi Triton L200 owners with a 2019–2023 model whose side mirror glass is cracked, clouded, or missing. They are also a practical choice for drivers who want to keep a spare set on hand for quick replacement after damage. Anyone who relies on clear side mirrors for daily driving, towing, or off-road use will find them useful.

How to Use / Care

1. Confirm your Mitsubishi Triton L200 is a 2019–2023 model before ordering.
2. Match the lens shape to the side mirror housing on your truck.
3. Replace the existing mirror glass with the new lens when needed.
4. Use the heated function as part of your normal mirror operation in cold or damp conditions.

How to Choose

Check that your vehicle is a Mitsubishi Triton L200 from 2019 to 2023, since the lens shape is specific to that range. Decide whether you need one side or both, and confirm that the replacement lens matches the heated function of your original mirror. If you are unsure about the exact model year or trim, compare the lens outline with your current mirror housing before buying.

Frequently Asked Questions

Will these mirror lenses fit my Mitsubishi Triton L200?
They are made for Mitsubishi Triton L200 models from 2019 to 2023. Check your truck’s model year and mirror housing shape to confirm a match.

Do these lenses have a heating function?
Yes, the reflective lens glass includes a heating function to help clear mist and frost from the mirror surface.

Are these lenses sold as a pair or individually?
Check the quantity shown at checkout to see whether you are ordering one lens or a pair.

Can I install these mirror lenses myself?
These are replacement lenses for the side mirror housing. Installation typically involves removing the old glass and fitting the new lens, but the exact method depends on your mirror assembly. A professional auto glass technician can handle the swap if you prefer.

How should I care for the mirror lenses?
Clean the reflective surface with a soft cloth and a mild glass cleaner to avoid scratches. Avoid abrasive pads or harsh chemicals that could damage the reflective coating.

Key Features

• Rain-Diverting Design — The air-diversion design is meant to channel rainwater away from the mirror surface.
• Clearer Rear View — It helps divert rain so you can see clearly through the rear view mirror while driving.
• Dust Reduction — In fine weather, it can reduce dust settling on the mirror.
• Snap-On Mounting — It snaps on to both sides of the car rearview mirror.
• Carved Carbon Fiber Look — The surface shows the texture of carved carbon fiber.

Product Specifications

• Material: ABS
• Color: Black
• Piece Count: 1 pair
• Size: 6.9 × 5 cm (2.7 × 1.97 in)

What It Is / How It Works

This is a car rear view mirror rain cover, also known as a mirror eyebrow. It is sold as a pair and is made of ABS with a black carved carbon fiber look.

Who It's For / Use Cases

Rear view mirror covers suit drivers who often face rain, wet weather, or dusty roads and want a simple shield over the side mirror. They are a practical choice for anyone who wants to keep the mirror view clearer during wet driving and reduce dust build-up in dry, calm weather.

How to Use / Care

1. Use it to shield the rear view mirror from rain and dust by snapping it on to both sides of the car rearview mirror.

How to Choose

Start with fit. It is designed to fit most car models, so compare the cover's 6.9 × 5 cm (2.7 × 1.97 in) size with the outline of your side mirror before you buy.

Choose the pair count that matches the number of mirrors you need to cover. The black finish keeps a uniform look on most car exteriors, and the ABS build suits everyday rain and dust protection.

Frequently Asked Questions

Does it fit most cars?
It is designed to fit most car models. It snaps on to both sides of the car rearview mirror, so measure your mirror outline first.

How big is each cover?
Each cover measures 6.9 × 5 cm (2.7 × 1.97 in).

What is it made of?
It is made of ABS and has a black carved carbon fiber texture on the surface.

How many pieces are in the pack?
The pack is one pair.

Does it help in rain?
Its air-diversion design channels rainwater away from the mirror, which gives a clearer rear view. In fine weather, it can reduce dust settling on the mirror.

Key Features

• Metal Alloy Build — The fuel cap cover is made from metal alloy, giving it a solid feel on the tank opening.
• Aluminum Alloy Option — An aluminum alloy version is also offered for buyers who prefer that metal.
• Glossy Finish — The cover carries a glossy finish that reflects light across its surface.
• Surface Mount Fit — It attaches with a surface mount, sitting over the fuel tank cap area.
• Adhesive Installation — A double-sided adhesive paste is used for easy and fast installation.

Product Specifications

• Material: Metal alloy, Aluminum alloy
• Color: Blue, Red, Black
• Finish Type: Glossy
• Mounting Type: Surface mount
• Sticker Placement: Fuel Tank Cap
• Water Resistance Level: Water proof
• Pattern: Round
• Packaging: 1 Piece
• Compatible models: Volkswagen VW Lupo Rline Passat Touran GTI Golf Jetta Scirocco

What It Is / How It Works

This fuel cap cover is a round trim piece that mounts on the fuel tank cap area of a car. It is made from metal alloy, with an aluminum alloy option, and comes in Blue, Red, or Black with a glossy finish. The cover uses a surface mount and a double-sided adhesive paste for installation.

Who It's For / Use Cases

Fuel cap covers suit drivers who want to dress up the fuel door area of a compatible car. They are a small exterior accent for owners who like a glossy metal detail on the tank cap. Buyers choosing a color to match or contrast with the body paint are the usual audience for this type of trim.

How to Use / Care

1. Use the cover on the fuel tank cap area of a compatible car.
2. Attach it with the double-sided adhesive paste.
3. Mount it as a surface mount over the cap.
4. Choose the Blue, Red, or Black version to match the car.

How to Choose

Pick the color first: Blue, Red, or Black. Check that the round shape and surface mount suit the fuel tank cap area of the car. The cover is sold as one piece.

Frequently Asked Questions

What material is the fuel cap cover made from?
It is made from metal alloy, and an aluminum alloy version is also offered.

What colors are available?
The cover comes in Blue, Red, and Black.

How does it attach?
It uses a surface mount with a double-sided adhesive paste for installation.

What is the finish like?
The cover has a glossy finish and a round pattern.

How many pieces are in one order?
Each order contains one piece.

Key Features

• Color Options — Available in White, Grey, Blue, and Black to match your vehicle's paint.
• Compact Size — Each pen contains 12 mL (0.41 US fl oz) of paint, ideal for small touch-ups.
• Easy Application — The brush tip allows precise application to cover small scratches and chips.

Product Specifications

• Color: White, Grey, Blue, Black
• Volume: 12 mL (0.41 US fl oz)

What It Is / How It Works

This is a paint repair pen designed for touching up small scratches and chips on car paint. It comes in a pen form with a brush tip for easy application.

Who It's For / Use Cases

Car owners who want to address minor paint imperfections like stone chips, key scratches, or edge wear without a full repaint. It's a practical option for maintaining a vehicle's appearance between professional detailing sessions.

How to Use / Care

1. Shake the pen for more than 10 seconds to ensure the paint is fully mixed.
2. Clean the scratched area with a scratch repair paste (sold separately), then turn the pen cap counterclockwise and apply a small amount of paint to the brush.
3. Apply the paint to the damaged surface. If the area isn't fully covered, wait about 3 hours for the first coat to dry, then apply a second coat until the defect is covered.

How to Choose

Consider the size of the damage — this pen is suited for small scratches and chips, not large areas.

Frequently Asked Questions

What colors are available?
This paint pen is available in White, Grey, Blue, and Black.

Can this pen fix large scratches?
This pen is designed for small scars and chips. The brush coating method may not produce a perfectly smooth finish on larger areas, especially with metallic paints.

Key Features

• Color Options — Choose from White, Red, Black, or Blue to match your vehicle's paint.
• Multi-Pack — Each set includes four paint pens, giving you extra product for multiple touch-ups.
• Compact Size — Each pen holds 12 mL of paint, a convenient amount for small scratch repairs.

Product Specifications

• Color: White, Red, Black, Blue
• Piece Count: 4 pcs
• Capacity: 12 mL (0.41 US fl oz)

What It Is / How It Works

This is a car paint repair pen set. The pens are designed to cover small paint scratches and chips on vehicles, helping to mask minor blemishes.

Who It's For / Use Cases

Car owners who want to address minor paint imperfections themselves will find these pens useful. They are suited for touching up small scratches or stone chips on body panels, offering a quick cosmetic fix without a full repaint.

How to Use / Care

1. Shake the pen for more than 10 seconds to mix the paint thoroughly.
2. Clean the scratched area with a scratch repair paste (sold separately) and wipe it dry.
3. Turn the pen cap counterclockwise and apply a small amount of paint to the damaged area using the brush.
4. If the first coat doesn't fully cover the scratch, wait about 3 hours for it to dry, then apply a second coat.

How to Choose

When selecting a paint pen, match the color to your vehicle's paint code. For metallic finishes, be aware that brush application may leave slight color differences or an uneven surface. Consider the size of the scratch: these pens work best on small blemishes, not large areas.

Frequently Asked Questions

What colors are available in this set?
The set includes four pens: White, Red, Black, and Blue.

Can this pen fix deep scratches?
This pen is intended for small paint damage only. The brush coating method may not produce a perfectly smooth finish, especially on metallic paints, and color differences may occur.

Key Features

• Color Options — Available in Black, White, Silver, and Gray to match your vehicle's paint.
• Compact Size — Each pen contains 12 mL (0. 41 US fl oz) of touch-up paint.
• Easy Application — Designed for simple DIY repair of small paint damage.

Product Specifications

• Color: Black / White / Silver / Gray
• Volume: 12 mL (0.41 US fl oz)
• Type: Pen

What It Is / How It Works

This is a paint repair pen for automotive touch-ups. It is a small, brush-tip pen filled with 12 mL of paint, intended for covering minor scratches and chips on car bodies.

Who It's For / Use Cases

Paint repair pens suit car owners who want to address small paint damage themselves. They are handy for touching up stone chips, edge wear, or light scratches without a full repaint. This pen is a practical addition to a DIY detailing kit.

How to Use / Care

1. Shake the pen for more than 10 seconds to mix the paint thoroughly.
2. Clean the damaged area with scratch repair paste (sold separately), then wipe it dry.
3. Turn the pen cap counterclockwise and apply a small amount of paint to the scratch using the brush tip.
4. If the scratch is not fully covered, wait about 3 hours for the first coat to dry, then apply a second coat. Ensure the paint is dry before reapplying.

How to Choose

When choosing a paint repair pen, first match the color to your vehicle's paint code. Consider the size of the damage: these pens work best on small scratches and chips, not large areas. For metallic paints, be aware that brush application may leave slight color differences or an uneven surface.

Frequently Asked Questions

What colors are available?
This paint pen comes in Black, White, Silver, and Gray.

How much paint is in each pen?
Each pen contains 12 mL (0. 41 US fl oz) of touch-up paint.

Can this pen fix deep scratches?
This pen is designed for small paint damage only. Due to the brush coating method, it may not fill deep scratches or provide a perfectly smooth finish, especially on metallic paints.

Do I need to prepare the surface before applying?
Yes, clean the damaged area with scratch repair paste (sold separately) and wipe it dry before applying the paint.

Key Features

• TPU Material — This film is made from TPU, a flexible material that conforms to curved surfaces.
• Black Finish — The black color gives headlights, taillights, and fog lights a darker, customized look.
• Scratch Protection — Designed to help protect against scratches from road debris like sand and gravel.

Product Specifications

• Color: Black
• Material: TPU
• Type: Color-Changing Film

What It Is / How It Works

This is a color-changing film, specifically a TPU protective film designed for Tesla Model 3 and Model Y vehicles. It is intended to be applied to headlights, taillights, and fog lights to give them a blackened appearance while offering a layer of protection.

Who It's For / Use Cases

Color-changing films are for Tesla Model 3 and Model Y owners who want to customize the look of their vehicle's lights. They suit drivers who prefer a darker, sportier appearance and who also want a layer of protection against everyday wear from road debris.

How to Use / Care

1. Clean the surface of the headlight, taillight, or fog light thoroughly to remove dirt and oils.
2. Align the film carefully with the light housing before applying.
3. Press the film onto the surface, smoothing out any air bubbles or wrinkles.
4. Check the edges to ensure the film is fully adhered and trim any excess if needed.

How to Choose

When choosing a color-changing film, consider the material. TPU offers flexibility and is often used for protective films. Ensure the film is designed for your specific vehicle model and the lights you intend to cover.

Frequently Asked Questions

What is this film made of?
This film is made of TPU, a flexible material that can conform to curved surfaces.

What color is the film?
The film is black, which gives a darkened look to the lights it covers.

Which Tesla models is this film for?
This film is designed for Tesla Model 3 and Model Y vehicles.

Will this film affect the brightness of my headlights?
The film is described as high transparency and is said not to affect the illumination effect of the original lamp.

Key Features

• Pen Applicator — This paint repair pen applies paint directly to small scratches and chips on car bodies.
• 12 mL Capacity — Each pen holds 12 mL (0.41 US fl oz) of paint, enough for touching up minor blemishes.
• Color Options — Available in Black, White, Green, Blue, and Grey to match a range of car finishes.

Product Specifications

• Type: Pen
• Capacity: 12 mL (0.41 US fl oz)
• Color Options: Black, White, Green, Blue, Grey

What It Is / How It Works

This is a car paint repair pen designed to cover small scratches and chips on vehicle bodies. The pen-style applicator lets you dab paint directly onto the damaged area, helping to hide minor blemishes. It is intended for small scars, especially on metal paint.

Who It's For / Use Cases

Car owners who want to tidy up minor paint damage like stone chips, key scratches, or edge wear will find a touch-up pen useful. It suits DIY users who prefer a quick, no-spray solution for small areas, and it works for a range of exterior colors.

How to Use / Care

1. Shake the pen for more than 10 seconds before use to mix the paint thoroughly.
2. Clean the repair area with scratch repair paste (sold separately), then turn the pen cap counterclockwise and apply a small amount of paint to the surface.
3. If the spot is not fully covered, wait about 3 hours for the first coat to dry, then apply a second coat. Ensure the paint is dry before reapplying.

How to Choose

Consider the size of the damage—these pens work best on small chips and scratches, not large areas.

Frequently Asked Questions

How much paint is in the pen?
Each pen contains 12 mL (0.41 US fl oz) of paint.

What colors are available?
The pen comes in Black, White, Green, Blue, and Grey.

Will the repair look perfect?
This brush-coating method is best for small scars, especially on metal paint. Because the metal particles cannot be evenly dispersed, there may be some color difference and the surface may not be perfectly smooth.

Key Features

• Color Options — Choose from Black, White, Silver, or Red to match your vehicle's paint.
• Compact Size — Each pen holds 12 mL (0.41 US fl oz) of touch-up paint.
• Easy Application — Designed for simple DIY repairs on small paint damage.
• Brush Tip — Uses a brush coating method suited for small scars, especially on metallic paint.

Product Specifications

• Color: Black / White / Silver / Red
• Volume: 12 mL (0.41 US fl oz)
• Compatible Models: Lexus RX XU10 (1998–2003), XU30 (2003–2009), AL10 (2009–2015), AL20 (2015–present)

What It Is / How It Works

This is a paint touch-up pen for automotive finishes. It is a DIY tool that lets you cover small paint damage such as chips and scratches on your vehicle's body.

Who It's For / Use Cases

Paint touch-up pens suit car owners who want to address minor paint imperfections at home. They are handy for anyone who prefers a quick, low-cost fix over a full repaint, and they work well for small scars on metallic paint finishes.

How to Use / Care

1. Shake the bottle for more than 10 seconds before use to ensure the paint is fully mixed.
2. Wipe the repaired surface and clean it with scratch repair paste (sold separately). Turn the pen cap counterclockwise and apply an appropriate amount of paint to the damaged area.
3. If the repair is not fully covered, wait for the first coat to dry (about 3 hours), then apply a second coat. Ensure the paint is dry before reapplying.

How to Choose

When selecting a touch-up pen, match the color to your vehicle's paint code. Consider the size of the damage: these pens are best for small scars, not large areas.

Frequently Asked Questions

What colors are available?
This pen comes in Black, White, Silver, and Red.

How much paint does each pen contain?
Each pen contains 12 mL (0.41 US fl oz) of touch-up paint.

Can I use this on any car?
This pen is designed for Lexus RX models with chassis codes XU10 (1998–2003), XU30 (2003–2009), AL10 (2009–2015), and AL20 (2015–present).

How do I apply the paint?
Shake the pen for over 10 seconds, clean the area with scratch repair paste (sold separately), then apply the paint with the brush tip. If needed, wait about 3 hours for the first coat to dry before applying a second coat.

Key Features

• Vehicle-Specific Fit — Designed for Tesla Model Y Juniper 2025-2026, Model 3 Highland 2024-2026, and Model Y Standard 2026.
• Color Options — Available in Silver, Black, or Red to match your vehicle.
• Surface Mount — Uses a surface mount design for straightforward placement.
• Water Resistance — Built with water resistance to handle everyday exposure.

Product Specifications

• Brand Name: heenvn
• Color: Black / Silver / Red
• Piece Count: 1
• Mounting Type: Surface mount
• Water Resistance Level: Water proof

What It Is / How It Works

This is a protective cover for the front camera of select Tesla models. It is a car accessory designed to shield the camera area from impacts and the elements.

Who It's For / Use Cases

Car owners who want to add a layer of protection to their vehicle's front camera may find this cover useful. It suits those who park outdoors or drive in conditions where the camera could be exposed to debris or weather.

How to Use / Care

1. Clean the surface where the cover will be placed to ensure good adhesion.
2. Align the cover over the camera area and press firmly to secure it.

How to Choose

When selecting a camera cover, consider the fit for your specific vehicle model and year. Check that the mounting style suits your preference for installation.

Frequently Asked Questions

Which Tesla models does this cover fit?
It fits Tesla Model Y Juniper 2025-2026, Model 3 Highland 2024-2026, and Model Y Standard 2026.

What color options are available?
The cover comes in Silver, Black, or Red.

Is the cover water resistant?
Yes, it is described as water proof, which helps protect the camera from moisture.

Key Features

• Paint Repair Pen — This pen applies a brush coating to cover small paint scars on metal surfaces.
• Color Options — Available in Black, White, Green, and Blue to match your vehicle's paint.
• Compact Size — Each pen contains 12 mL of paint, enough for small touch-up jobs.

Product Specifications

• Type: Pen
• Color: Black, White, Green, Blue
• Dimensions: 12 mL (0.41 US fl oz)

What It Is / How It Works

This is a paint repair pen designed for touching up small scratches and chips on car paint. It uses a brush coating method to cover minor damage, especially on metal paint finishes.

Who It's For / Use Cases

Car owners who want to quickly address minor paint imperfections without a full repaint. It's suitable for small scars and chips, particularly on metal paint surfaces.

How to Use / Care

1. Shake the bottle for more than 10 seconds to mix the paint thoroughly.
2. Clean the damaged area with scratch repair paste (sold separately) and wipe it dry.
3. Turn the pen cap counterclockwise and apply a small amount of paint to the surface.
4. If needed, wait about 3 hours for the first coat to dry, then apply a second coat until the defect is covered.

How to Choose

Select a color that matches your vehicle's paint. Consider the size of the damage — this pen is best for small scars, not large areas. If you have a metal paint finish, note that brush coating may leave slight color differences.

Frequently Asked Questions

What colors are available?
This pen comes in Black, White, Green, and Blue.

Can this pen fix large scratches?
No, it is designed for small scars only. The brush coating method may not cover large areas evenly.

Key Features

• Color Options — Available in Black, White, Green, Silver, and Red to match your vehicle's paint.
• Compact Size — Each pen holds 12 mL (0. 41 US fl oz) of touch-up paint.
• Easy Application — The brush coating method lets you apply paint directly to small scars and chips.
• Compatible Generations — Designed for Kia Sportage SL (2010-2016), QL (2016-2021), and NQ5 (2021-present) models.

Product Specifications

• Color: Black, White, Green, Silver, Red
• Dimensions: 12 mL (0.41 US fl oz)
• Type: Pen
• Compatible Generations: SL , QL , NQ5

What It Is / How It Works

This is a paint repair pen designed for touching up small paint damage on vehicles. It comes in a pen format with a brush tip, allowing you to apply paint directly to chips and scratches. The pen is intended for use on Kia Sportage models from the SL, QL, and NQ5 generations.

Who It's For / Use Cases

Paint repair pens suit car owners who want to address minor paint chips, stone nicks, and small scratches without a full repaint. They are handy for anyone who prefers a quick, DIY touch-up to keep the vehicle looking tidy. This pen is especially relevant for Kia Sportage owners with the compatible generations.

How to Use / Care

1. Shake the bottle for more than 10 seconds before use to ensure the paint is fully mixed.
2. Clean the repaired surface and wipe it with scratch repair paste (sold separately). Turn the pen cap counterclockwise and apply an appropriate amount of paint with the brush.
3. If the repair site is not completely covered, wait for the first coat to dry (about 3 hours), then apply a second coat until the defect is covered. Ensure the paint is dry before reapplying.

How to Choose

When choosing a paint repair pen, consider the color match for your vehicle. The pen is available in Black, White, Green, Silver, and Red.

Frequently Asked Questions

What colors are available for this paint repair pen?
The pen comes in Black, White, Green, Silver, and Red. Choose the color that matches your vehicle's paint.

Which Kia Sportage models is this pen compatible with?
It is designed for Kia Sportage SL (2010-2016), QL (2016-2021), and NQ5 (2021-present) generations, including trims like LX, EX, SX, and others.

Can this pen repair large scratches or deep damage?
The brush coating method is intended for small scars and chips, especially on metal paint. It may not be suitable for large or deep damage, and there may be some color difference or surface unevenness due to the limitations of the brush method.

Key Features

• Glossy Finish — These rear bumper fog light lamp cover trims have a glossy finish that adds a sleek look to the car's exterior.
• Designed Surface Mounting — Designed for surface mounting, these trims attach directly onto the bumper area for a secure fit.
• Water Resistant — The water-resistant construction helps protect the fog light area from moisture and weather exposure.

Product Specifications

• Material: Plastic
• Finish Type: Glossy
• Mounting Type: Surface mount
• Water Resistance Level: Waterproof

What It Is / How It Works

These are rear bumper fog light lamp cover trims designed for the VW Golf 8 MK8 (2020-2021). They are plastic trims with a glossy finish that mount on the surface of the bumper to cover the fog light area, adding a honeycomb-style accent to the rear of the vehicle.

Who It's For / Use Cases

They suit car enthusiasts looking for a subtle exterior accent that adds a glossy, honeycomb-style detail without changing the original bumper structure.

How to Use / Care

1. Clean the surface of the bumper where the trim will be attached to remove dirt and wax.
2. Align the trim over the fog light area and press firmly to secure it in place.

How to Choose

When choosing rear bumper fog light cover trims, consider the material and finish to match your car's style. Plastic trims are lightweight and easy to install, while a glossy finish can give a polished look.

Frequently Asked Questions

What material are these fog light cover trims made of?
These trims are made of plastic, which is lightweight and durable for exterior use.

Are these trims water resistant?
Yes, they are described as waterproof, so they can handle exposure to rain and moisture without damage.

Key Features

• Quick Touch-Up — This paint pen applies directly to small paint damage to cover up scratches and chips.
• Brush Applicator — The brush coating method is designed for small scars, especially on metal paint.
• 12 mL Size — Each pen holds 12 mL (0. 41 US fl oz) of paint for multiple touch-ups.
• Blue Color — This pen is filled with blue paint to match your vehicle's finish.

Product Specifications

• Color: Blue
• Dimensions: 12 mL (0.41 US fl oz)
• Type: Pen

What It Is / How It Works

This is a paint repair pen for automotive touch-ups. It comes in blue and holds 12 mL of paint, designed to cover small scratches and chips on your car's body.

Who It's For / Use Cases

Paint repair pens are for car owners who want to fix minor paint damage themselves. They suit people who have small scratches or chips from daily driving and prefer a quick, DIY solution without a full repaint.

How to Use / Care

1. Shake the bottle for more than 10 seconds before use to ensure the paint is fully mixed.
2. Wipe the repaired surface and clean it with scratch repair paste (purchased separately). Turn the pen cap counterclockwise and apply an appropriate amount of paint with the brush.
3. If the repair site is not completely covered, wait for the first coat to dry (about 3 hours), then apply a second coat until the defect is covered. Ensure the paint is dry before reapplying.

How to Choose

When choosing a paint repair pen, consider the color match for your vehicle and the size of the damage. This pen is best for small scars, especially on metal paint. For larger areas, a different method may be needed.

Frequently Asked Questions

What size is this paint pen?
This paint pen contains 12 mL (0. 41 US fl oz) of blue paint.

How do I apply the paint?
Shake the pen for over 10 seconds, clean the surface with scratch repair paste (sold separately), then apply the paint with the brush. If needed, wait about 3 hours for the first coat to dry before applying a second coat.

Can this pen fix large scratches?
This pen is designed for small scars, especially on metal paint. The brush coating method may leave color differences and a less smooth surface on larger areas.

Key Features

• Black Finish — Finished in black, this spoiler adds a subtle dark accent to the rear roof line.
• ABS Plastic Build — Made from ABS plastic, a material known for its strength and resistance to impact.
• Decorative Styling — Designed to decorate the rear roof area, giving the vehicle a more customized appearance.

Product Specifications

• Brand: XUEHUAZHONG
• Material: ABS plastic
• Color: Black
• Placement: Rear Roof
• Model Year: 2013-2019
• Certification: CCC

What It Is / How It Works

This is a rear roof spoiler, an exterior trim piece that mounts on the back edge of a car's roof. It is crafted from ABS plastic and finished in black to blend with many vehicle color schemes. The spoiler is intended for decorative purposes, adding a sportier or more customized look to the vehicle's silhouette.

Who It's For / Use Cases

Rear roof spoilers appeal to car owners who want to personalize the exterior styling of their vehicle. They are often chosen by enthusiasts looking to add a subtle aerodynamic accent without a full body kit. This type of accessory suits those who prefer a black finish that can complement or contrast with the car's paint, and who value a lightweight yet durable material like ABS plastic for long-term use.

How to Use / Care

1. Clean the mounting area on the rear roof thoroughly to remove dirt, wax, and debris.
2. Dry the surface completely before positioning the spoiler.
3. Align the spoiler with the roof edge, ensuring it is centered and level.
4. Press the spoiler firmly into place, applying even pressure along its length.

How to Choose

When selecting a rear roof spoiler, consider the material, finish, and fit for your vehicle. ABS plastic is a lightweight and durable option commonly used for such accessories. The color should match or complement your car's paint; black is a versatile choice that works with many shades. Ensure the spoiler is designed for your vehicle's model year and roof shape to achieve a proper fit.

Frequently Asked Questions

What material is this rear roof spoiler made of?
It is made of ABS plastic, a type of plastic known for its strength and impact resistance.

What color is the spoiler?
The spoiler is black, which allows it to blend with many vehicle colors or create a contrast.

Where is the spoiler placed on the vehicle?
It is designed for placement on the rear roof of the vehicle.

Is this spoiler compatible with my BMW 3 Series?
The spoiler is intended for BMW 3 Series models from 2013 to 2019, but we recommend verifying fitment with your specific model and year before purchase.

Does the spoiler come with installation hardware?
The product listing does not specify included hardware. Typically, such spoilers may require adhesive tape or screws, but you should check the package contents upon delivery.

Protect your Tesla Model Y Juniper 2025 from day one with this invisible TPU film set. Designed specifically for the front and rear door areas, it provides a clear, durable barrier against scratches, mud splashes, and everyday wear without changing your car's look.

This protective film is made from high-quality TPU material that is both flexible and resilient. It effectively guards the paint on your car's float and door corners from damage caused by road debris and minor impacts. The film is washable and can be installed multiple times, making it a practical choice for long-term protection.

The five-layer construction of this TPU film includes a surface protection layer, micro nano coating, TPU coating, adhesive layer, and a protective bottom layer. This structure ensures strong adhesion without leaving any residual glue marks on your car's paint. It is also waterproof and resistant to sun, rain, and temperature changes, ensuring it stays in place and performs well over time.

Installation is straightforward for those comfortable with DIY, but professional help is recommended for the best finish. The film is designed to fit the specific contours of the Tesla Model Y Juniper 2025, offering a snug and compliant fit that enhances your vehicle's appearance while keeping it safe.

Key Features and Benefits

- TPU material that provides effective protection against scratches and mud splashes, keeping your car's paint looking new.

• Washable and reusable design that allows for multiple installations without damage, offering flexibility and value.

• Five-layer structure that includes a protective coating and adhesive layer, ensuring no residual glue marks on your vehicle.

• Waterproof and weather-resistant construction that withstands sun, rain, and high or low temperatures, maintaining performance.

• High flexibility that resists damage from sharp objects, helping to reduce the appearance of wear over time.

• Precision fit for the Tesla Model Y Juniper 2025 front and rear door areas, ensuring a seamless and invisible look.

Who Is This For

- Tesla Model Y Juniper 2025 owners who want to protect their car's paint from scratches and road debris.

• Drivers who frequently travel on gravel roads or in areas with mud and stones that can chip paint.

• Car enthusiasts who prefer an invisible protective layer that does not alter the vehicle's original appearance.

• DIY users who are comfortable with wet installation methods and want a cost-effective paint protection solution.

Usage Scenario

Mark just picked up his new Tesla Model Y Juniper 2025 and wanted to keep it looking pristine. After a weekend drive on a gravel road, he noticed small chips forming near the door edges. He applied this TPU film set to the front and rear doors. The film was easy to install with a spray of water, and it now absorbs the impact from flying stones and mud splashes. Mark's car stays protected without any visible film lines, and he feels confident driving on any road.

Micro Comparison

Unlike hard plastic covers that can look bulky or crack over time, this TPU film offers a flexible and invisible solution. It molds to the shape of your car's doors and provides a self-healing quality that resists minor scratches. The film is also removable without leaving sticky residue, which is a common issue with lower-quality adhesive protectors.

Specifications

Material: TPU

Year: For Tesla Model Y Juniper 2025

Package Includes

1 x Set of TPU Protective Film for Front and Rear Doors

Why You Will Love It

You will love the peace of mind that comes from knowing your Tesla's paint is shielded from daily hazards without any visible alteration. This film set is a smart investment that preserves your car's resale value and keeps it looking showroom fresh. It offers a simple, effective way to maintain your vehicle's appearance with minimal effort.

Questions and Answers

Question: Will this film fit my Tesla Model Y Juniper 2025 exactly?

Answer: Yes, this film set is specifically designed for the front and rear doors of the Tesla Model Y Juniper 2025 for a precise fit.

Question: Can I install this TPU film myself?

Answer: Yes, you can install it yourself using a spray of water or detergent to help squeeze out bubbles. It is washable and can be repositioned if needed.

Question: Does this film leave any glue residue when removed?

Answer: No, the TPU material is designed to be removed without leaving any residual adhesive marks on your car's paint.

Question: How does this film protect against scratches?

Answer: The TPU material has high flexibility and a five-layer structure that resists damage from sharp objects and reduces the appearance of scratches.

Question: Is the film waterproof and weather resistant?

Answer: Yes, it is waterproof and washable, and it can withstand sun, rain, and high or low temperatures without falling off.

Question: What should I do if I receive a damaged or incomplete product?

Answer: Please contact us immediately and we will arrange to send you a new set for free.

Question: Can the film be applied to other parts of the car?

Answer: This set is specifically for the front and rear door areas of the Tesla Model Y Juniper 2025. It is not intended for other parts of the vehicle.

Key Features

• Rainproof Design — Helps keep side mirrors clear in wet conditions.
• Stick-On Fitting — Sticks directly to the mirror housing and does not disturb your view while driving.
• Carbon Fiber Look — Adds a stylish, sporty accent to the exterior of your car.
• Two Pieces Per Set — Each set has one piece for each side mirror.

Product Specifications

• Piece Count: 2 pieces per set
• Material: PVC
• Size: Approx. 16.7 x 5.4 cm

What It Is / How It Works

This rain eyebrow is a thin, sticker-style guard that attaches to the top edge of a car side mirror housing. It is a carbon fiber look rain eyebrow sold as a set of two, designed for a range of Renault models including the Megane RS, Twingo, and Captur.

Who It's For / Use Cases

Rain eyebrows suit drivers who often face wet weather and want a simple way to keep rainwater off the side mirror glass. Car owners who like a carbon fiber accent on the exterior may also find them appealing, since the stick-on design needs no tools.

How to Use / Care

1. Clean the mirror housing surface before fitting.
2. Peel off the backing and stick the eyebrow onto the top edge of the mirror housing.
3. Stick one piece on each side mirror.
4. If any residue remains after removal, use a mild adhesive remover.

How to Choose

Start with your mirror housing shape, since the rain eyebrow sits along its top edge. The stated size is approx. 16.7 x 5.4 cm (6.6 x 2.1 in), so measure your housing before buying. Choose the carbon fiber look if you want a sporty exterior accent, and choose a two-piece set when you need coverage on both side mirrors.

Frequently Asked Questions

Will these fit my Renault Captur?
Yes, they are designed to fit the Captur along with other Renault models such as the Megane RS and Twingo.

Do they block my view while driving?
No, they sit on the top edge of the mirror housing and are designed not to interfere with your normal sight line.

Can they be removed without damaging the paint?
They can be peeled off carefully. If any residue remains, use a mild adhesive remover.

Are they weather resistant?
Yes, they are made from PVC and are made to handle rain and sun exposure on the mirror housing.

How many pieces come in a set?
Each set contains two pieces, one for each side mirror.

Key Features

• Rain and Dust Protection — It is rainproof and dustproof, so it keeps dirt and debris away from the charging port.
• Waterproof PVC Cover — It is made of PVC, which is waterproof and protects the charger gun from rain and moisture.
• Velcro and Magnet Closure — Soft magnets and Velcro strips hold the cover in place, and it is easy to remove.
• Continuous Outdoor Use — It is designed for continuous outdoor use when it is attached securely, so wind does not blow it off.

Product Specifications

• Material: PVC
• Color: Black, White
• Size: 60 × 50 cm (23.6 × 19.7 in)
• Installation: Soft magnet + Velcro
• Package Contents: 1 x charging gun rain cover

What It Is / How It Works

This EV charger port rain cover is made of PVC and protects the charger gun from rain and dust during outdoor charging. It helps keep the charging equipment clean and dry at home, at work, or at a public station.

Who It's For / Use Cases

EV owners who charge their car outdoors or in open garages will find this cover useful. Drivers who often use public charging stations can use it for added protection for the charger gun. Homeowners who want to keep their charging setup clean and well-maintained may also find it suits them.

How to Use / Care

1. Install the cover over the charger gun.
2. Secure it with the soft magnets and Velcro strips.
3. Leave it in place for continuous outdoor use, making sure it is attached so wind does not blow it off.
4. Remove it by releasing the soft magnets and Velcro strips.

How to Choose

Measure your charger gun before buying, because this cover is sized at 60 × 50 cm (23.6 × 19.7 in). Choose black or white to match your vehicle or charging station. The PVC material is suited to rain and dust protection outdoors.

Frequently Asked Questions

What is the cover made of?
The PVC material is waterproof and resists dust. It is rainproof and dustproof, which keeps rain and dirt off the charger gun.

How is the cover held in place?
Soft magnets and Velcro strips hold it in place. Wrap it around the charger gun and press the Velcro to secure it.

Can I leave it on outdoors all the time?
It is designed for continuous outdoor use. Make sure it is properly attached so wind does not blow it off.

Does it work with wall-mounted chargers?
It works with most wall-mounted and portable charging stations. It measures 60 × 50 cm (23.6 × 19.7 in).

What comes in the box, and what colors are available?
One charging gun rain cover is included, available in black or white.

Drive safely in rainy weather with this 4-piece rainproof film set for your car. It includes two films for the rearview mirrors and two for the side windows, helping keep water droplets off the glass. The adhesive tape makes installation simple and secure.

Rain and fog can make it hard to see your mirrors and side windows clearly. This rainproof film creates a protective layer that helps water slide off the surface. You get a clearer view of the road and traffic around you, which makes driving in wet conditions less stressful and safer.

Each film is made from durable PVC material that sticks firmly to the glass. The set covers both rearview mirrors and both front side windows, giving you complete coverage. Once applied, the film stays in place and works every time it rains.

Key Features and Benefits

- 4-piece set that covers two rearview mirrors and two side windows for full rain protection

• PVC material that resists water and helps droplets roll off for better visibility

• Adhesive tape backing that sticks securely to glass for easy installation

• Works in rain and fog to reduce water buildup for safer driving

• Thin and clear design that does not block your view while driving

Who Is This For

- Drivers who frequently drive in rainy or wet conditions

• Car owners who want a simple, non-electric solution for better mirror visibility

• Anyone who finds it hard to see side mirrors and windows clearly during rain

Usage Scenario

Maria lives in a city where it rains almost every week. She used to wipe her mirrors before every drive, but the water always came back. After applying this rainproof film set to her mirrors and side windows, she noticed the water beaded up and slid off. Now she feels more confident changing lanes and parking in the rain.

Micro Comparison

Unlike bulky mirror covers or electronic defoggers that require wiring, this film set is a lightweight and affordable option. It uses simple adhesion to create a water-repellent surface without changing the look or function of your mirrors. You get instant rain protection without modifying your car.

Specifications

- Material: PVC

-

Package includes

2 rearview mirror films + 2 side window films

Package Includes

- 2 x Rearview mirror rainproof film

• 2 x Side window rainproof film

Why You Will Love It

You will love how easy it is to see your mirrors and side windows during a downpour. No more wiping glass or guessing what is behind you. This simple film set gives you peace of mind and a safer drive every time it rains.

Questions and Answers

Question: Will this film work on all car models?

Answer: Yes, it fits most standard rearview mirrors and side windows because it is cut to a universal size.

Question: How do I install the film?

Answer: Clean the glass surface, peel off the backing, and press the film onto the glass. It sticks with the adhesive tape.

Question: Can I remove the film later?

Answer: Yes, you can peel it off carefully. It may leave some residue that can be cleaned with alcohol.

Question: Does the film affect mirror adjustment?

Answer: No, the film is thin and does not interfere with mirror movement or adjustment.

Question: How long does the film last?

Answer: With proper installation, it lasts through many rain cycles. Replace it when the adhesive weakens.