Keep your tire pressure in check with this reliable 433MHz TPMS sensor. Designed as a direct replacement for a wide range of Lexus and Toyota models, it helps you maintain safe driving conditions by monitoring tire pressure in real time. This sensor comes pre-programmed for your specific vehicle, so no complex setup is required before installation.

This sensor is a 100% new unit that matches OEM part numbers 42607-50010, 42607-50011, and PMV-107K. It is built with a durable PCBA board and battery to provide long-lasting performance. The sensor needs to be activated with a scan tool after installation, and you will need an OBDII tool to complete the relearn process.

Driving with properly inflated tires improves fuel efficiency, extends tire life, and enhances overall vehicle safety. This TPMS sensor gives you the peace of mind that comes from knowing your tire pressure is being monitored accurately every time you drive.

Key Features and Benefits

- Pre-programmed for your vehicle that eliminates the need for manual programming before installation

• 433MHz frequency that ensures reliable wireless communication with your car's TPMS system

• Direct replacement design that fits multiple Lexus and Toyota models for broad compatibility

• 100% new PCBA board and battery that delivers dependable long-term performance

• Simplified relearn process using an OBDII tool that makes activation straightforward

Who Is This For

- Owners of Lexus ES, GS, IS C, or LS models from 2005 to 2013 looking for a direct replacement sensor

• Toyota Camry, Prius, RAV4 III, or Land Cruiser drivers needing a pre-programmed TPMS sensor

• DIY mechanics who have access to a scan tool and OBDII relearn tool for installation

• Anyone replacing a faulty or dead TPMS sensor to restore proper tire pressure monitoring

Usage Scenario

Mark noticed his Toyota Camry's low tire pressure light was staying on even after inflating the tires. After checking for leaks, he found one of the original TPMS sensors had failed. He ordered this pre-programmed replacement, installed it at home, and used his OBDII scanner to complete the relearn process. The warning light turned off, and he could finally trust his tire pressure readings again.

Micro Comparison

Unlike generic universal sensors that require complex programming and may not sync properly with your vehicle, this TPMS sensor is pre-programmed specifically for your Lexus or Toyota model. It matches the OEM part numbers exactly, so you get a direct fit without guessing or modifying anything. The simplified relearn process with an OBDII tool also saves you time compared to older sensors that need multiple steps to activate.

Specifications

Material: PCBA board and battery

Model Number: PMV-107K 42607-50010 42607-50011

OEM Number: PMV-107K

Frequency: 433MHz

Package Includes

- 1 or 4 TPMS Tire Pressure Sensor(s) (depending on selected quantity)

Why You Will Love It

You will appreciate how easy it is to restore your vehicle's tire pressure monitoring system with this pre-programmed sensor. No complicated programming steps are needed, and the direct fit means you can get back on the road with confidence. It is a simple, cost-effective solution that helps you drive safer and more efficiently.

Questions and Answers

Question: Does this sensor come pre-programmed for my car?

Answer: Yes, the sensor is 100% new and pre-programmed specifically for your vehicle's make, model, and year. You do not need to program it before installation.

Question: Do I need any special tools to install this TPMS sensor?

Answer: Yes, you will need a scan tool to activate the sensor and an OBDII tool to complete the relearn process after installation.

Question: Will this sensor work on my 2008 Toyota RAV4?

Answer: Yes, this sensor is compatible with the Toyota RAV4 III from 2005-11 to 2013-01, which includes the 2008 model year.

Question: How do I know if this is the right part for my Lexus GS?

Answer: Please check the part number on your old sensor. If it matches 42607-50010, 42607-50011, or PMV-107K, this sensor will be a direct replacement.

Question: Can I install this sensor myself, or should I go to a professional?

Answer: Installation is recommended to be performed only by trained professionals, but experienced DIY users with the right tools can also do it.

Key Features

• Four-Sensor Set — The set has four sensors, so all tire pressure monitors can be replaced at once for consistent readings.
• Pre-Programmed Sensors — They are pre-programmed for specific Hyundai and Kia models, so manual programming is not needed.
• 433MHz Frequency — The sensors operate at 433MHz to match the TPMS system of the supported vehicles.
• Factory Tested — Each sensor is factory tested before shipping.

Product Specifications

• Piece Count: 4PCS
• Operating Frequency: 433MHZ
• Battery Life: Approximately 3 to 5 Years
• Part Numbers: 52933-3N100, 52933-2M650, 52933-B1100, 52933-A5100, 52933-2J100, 52933-2M600
• Compatible models: Hyundai Genesis Coupe Santa Fe Kia

What It Is / How It Works

These are four tire pressure monitoring sensors (TPMS) for replacing worn or failing units on Hyundai and Kia vehicles. They operate at 433MHz and come pre-programmed for specific models.

Who It's For / Use Cases

TPMS sensors suit drivers whose tire pressure warning light has come on or whose existing sensors have worn out or are failing. They also suit owners who have a TPMS scan tool or OBDII relearn tool and want to save on labor costs, as well as anyone who prefers to have a tire shop handle the fitting.

How to Use / Care

1. Have a trained professional or tire shop remove the tire from the wheel and fit the sensors.
2. After installation, activate the sensors with a TPMS scan tool or complete the relearn procedure with an OBDII tool.
3. If the TPMS light stays on, confirm the sensors were activated with a scan tool and that the relearn was completed correctly.

How to Choose

Start by comparing the part numbers in Product Specifications with your original sensor. The sensors are pre-programmed for specific Hyundai and Kia models, so the vehicle and model year matter. Choose this set when you need all four tire pressure sensors replaced at once.

Frequently Asked Questions

How do I know if these sensors fit my car?
Compare the part numbers in Product Specifications with your original sensor. You can also verify compatibility using your vehicle's VIN code or the car model and year.

Do I need to program these sensors before installation?
No. They come pre-programmed for your vehicle and need activation with a TPMS scan tool or an OBDII relearn procedure after installation.

How long does the battery last?
The built-in battery lasts approximately 3 to 5 years under normal driving conditions.

Can I install these sensors myself?
Installation requires removing the tire from the wheel, so a trained professional or tire shop is recommended.

What should I do if the TPMS light stays on after installation?
Confirm the sensors were activated with a scan tool. If the light stays on, check that the sensors match your vehicle and that the relearn was completed correctly.

Key Features

• Direct-Fit Design — It is a direct replacement for the original equipment and fits multiple Chrysler, Dodge, Jeep, and Fiat models.
• 433MHz Operation — It operates at 433MHz to work with the vehicle's existing TPMS system.
• Long-Life Battery — The battery is rated for approximately 5 years to reduce how often the sensors need replacing.
• Pre-Programmed Sensors — Each sensor is pre-programmed to match OEM specifications.
• Set of Four — The set includes 4 sensors, so all wheels can be replaced at once.

Product Specifications

• Piece Count: 4 pcs
• Operating Frequency: 433MHz
• Battery Life: About 5 Years
• Part numbers: 56029398AB, 68241067AA

What It Is / How It Works

These are tire pressure monitor sensors, which mount in each wheel and send tire pressure readings to the vehicle's dashboard system. This set of 4 sensors is built as a direct replacement for the original equipment and is designed to communicate with the car's onboard TPMS system at 433MHz. When pressure drops below the recommended level, the sensor signals the dashboard warning light.

Who It's For / Use Cases

These sensors suit drivers of Chrysler 300, Town & Country, Voyager, or Grand Voyager models from 2010 to 2021, owners of Dodge Durango, Grand Caravan, Journey, or Charger vehicles, Jeep Grand Cherokee and Wrangler owners, and Fiat 500, 500L, and Freemont drivers who need replacement TPMS sensors.

How to Use / Care

1. Verify your vehicle's year, make, model, and trim against the compatibility list before installing.
2. Install the sensors without special tools or dealer visits.
3. Plan to replace the set when the sensors near the end of their rated battery life of about 5 years.

How to Choose

Start with your vehicle's year, make, model, and trim, then match them against the compatibility list. You can also cross-reference your original part number with the numbers 56029398AB and 68241067AA. Choose the 433MHz frequency to match the existing TPMS system, and buy a set of 4 when you need to replace sensors on all wheels at once.

Frequently Asked Questions

Do I need to program these sensors before installation?
No. They come pre-programmed to match OEM specifications for the listed vehicles and are designed for direct installation without additional programming.

How long does the battery last?
The battery is rated for about 5 years under normal driving conditions.

What operating frequency do these sensors use?
They operate at 433MHz, the standard frequency for the compatible vehicles listed.

Can I use these sensors on a 2015 Dodge Durango?
Yes. The Dodge Durango from 2011 to 2015 for the US market and 2011 to 2020 for the European market is compatible with this sensor set.

Will these sensors work on a 2014 Jeep Grand Cherokee?
Yes. The Jeep Grand Cherokee from 2010 to 2015 for the US market and 2011 to 2019 for the European market is compatible with these sensors.

Keep your Mercedes-Benz V-Class, Vito, or Metris running safely with a direct replacement TPMS tire pressure sensor. This sensor monitors your tire pressure and temperature in real time, helping you avoid potential tire-related issues on the road. It comes pre-programmed for your specific vehicle model and year, so no manual programming is needed before installation.

This sensor is built to replace the original part number A0009057205 and operates at a 433MHz frequency. It is made from durable ABS and metal materials, designed to withstand daily driving conditions. The sensor has a battery life of about three years, giving you reliable long-term performance.

Installation should be done by a trained professional. After mounting, the sensor will need to be activated using a compatible scan tool or through your vehicle's relearn procedure. This process ensures the sensor communicates correctly with your car's TPMS system.

Choose between a single sensor or a set of four to replace all sensors at once. Each sensor is brand new and high quality, offering a direct fit for your Mercedes-Benz.

Key Features and Benefits

- Pre-programmed for your vehicle that requires no manual programming before installation, saving you time and setup effort.

• Monitors tire pressure and temperature in real time that helps you detect issues early and drive with more confidence.

• Made from ABS and metal materials that provide durability and long-lasting performance in various road conditions.

• 433MHz operating frequency that ensures reliable communication with your vehicle's TPMS system.

• Battery life of about three years that reduces the need for frequent replacements.

• Direct replacement design that fits your Mercedes-Benz without modifications.

Who Is This For

- Mercedes-Benz V-Class, Vito, or Metris owners who need a replacement TPMS sensor.

• Drivers who want to maintain proper tire pressure for safety and fuel efficiency.

• Vehicle owners looking for a pre-programmed sensor that simplifies the installation process.

• Fleet managers maintaining multiple Mercedes-Benz vehicles with consistent TPMS performance.

Usage Scenario

Michael noticed his V-Class tire pressure warning light came on during a long highway trip. He had a spare sensor in his glove box after reading about the benefits of keeping a replacement on hand. He visited his local tire shop, where a technician installed the new sensor and performed the relearn procedure. Within minutes, the warning light turned off, and Michael continued his drive with peace of mind knowing his tire pressure was being monitored again.

Micro Comparison

This sensor offers a direct replacement for the original part A0009057205 without requiring programming before installation. Some aftermarket sensors need to be cloned or programmed with a tool, but this unit comes pre-configured for your specific Mercedes-Benz model and year. It provides a straightforward solution for restoring your TPMS functionality.

Specifications

- Manufacture Part Number: A0009057205

• Replacement Part Number: A0009057205

• Operating Frequency: 433MHz

• Material: ABS + Metal

• Battery Life: About 3 Year

• Color: As the pictures show

• Fitment Type: Direct Replacement

• Condition: Brand New & High Quality

Package Includes

- 1 or 4 Tire Pressure Sensor(s) depending on selected quantity

Why You Will Love It

You will love how easy it is to get your TPMS back online without complicated programming steps. The sensor gives you real-time tire data so you can focus on the road. It is a reliable, direct fit part that keeps your Mercedes-Benz driving safely.

Questions and Answers

Question: Do I need to program this sensor myself?

Answer: No, the sensor comes pre-programmed for your vehicle's make, model, and year. You only need to activate it using a compatible scan tool or your vehicle's relearn procedure after installation.

Question: What vehicles does this sensor fit?

Answer: This sensor fits European market Mercedes-Benz V-Class, Vito, V-Class EQV 300, and Vito Tourer from 2024-05 to 2025-12. It also fits the US market Mercedes-Benz Metris from 2024-05 to 2025-11. Always check your vehicle's VIN and model year to confirm compatibility.

Question: How long does the battery last?

Answer: The battery life is about three years under normal driving conditions.

Question: Can I install this sensor myself?

Answer: Installation is recommended to be performed by a trained professional. The tire must be dismounted, and the sensor needs to be properly fitted to the rim.

Question: What is the operating frequency of this sensor?

Answer: The sensor operates at 433MHz, which is a common frequency for many Mercedes-Benz TPMS systems.

Question: Will this sensor work if my existing part number is different?

Answer: It is important to ensure your existing part number matches A0009057205. If the numbers do not match, the part will not work with your vehicle.

Key Features

• Pre-Programmed Setup — It comes pre-programmed for your vehicle, so no complex setup is needed before installation.
• 433MHz Frequency — It operates at 433MHz, the same frequency as original BMW TPMS equipment.
• About Three-Year Battery — Battery life is about 3 years, supporting long-term tire pressure monitoring.
• Auto Relearn Support — It supports auto relearn, which simplifies the activation process.
• Interchange Part Numbers — It matches OEM part numbers 6855539, 36106881890, and 36106856209.

Product Specifications

• Vehicle Fit: BMW 4-Series 2014-2022, F32, F33, F36
• Frequency: 433MHz
• Battery Life: About 3 years
• Programming: Pre-programmed for the vehicle
• Interchange Part Numbers: 6855539, 36106881890, 36106856209
• Quantity: 1 x TPMS Tire Pressure Sensor

What It Is / How It Works

This is a TPMS tire pressure sensor, a replacement unit for the tire pressure monitoring system on the BMW 4-Series F32, F33, and F36 from 2014 to 2022. It is designed to replace a worn or damaged sensor and works with the vehicle's onboard system. Tire pressure sensors of this type sit inside each wheel and send pressure readings to the vehicle's monitoring system.

Who It's For / Use Cases

BMW 4-Series owners who need a replacement TPMS sensor for an F32, F33, or F36 model from 2014 to 2022 are the intended buyers. Owners whose worn or damaged sensor needs replacing will find it suits that need, especially buyers who want a part with the same 433MHz frequency as original equipment.

How to Use / Care

1. Have a qualified mechanic install the sensor on the vehicle.
2. Perform the auto relearn procedure after installation so the sensor syncs with the vehicle.
3. Confirm the sensor uses 433MHz and matches OEM part numbers 6855539, 36106881890, and 36106856209 before installing.

How to Choose

Start with the vehicle. This sensor is designed for 2014-2022 BMW 4-Series models, including F32, F33, and F36, so confirm your model and year first. Next, match the part number: compare your existing sensor's OEM number with 6855539, 36106881890, or 36106856209. Frequency also matters, and 433MHz matches original BMW TPMS equipment. Choose a pre-programmed unit if you want to skip programming, but plan for a relearn procedure after installation.

Frequently Asked Questions

Does this sensor come pre-programmed for my BMW 4-Series?
Yes, it comes pre-programmed for the vehicle's make, model, and year. You activate it with a scan tool or a relearn procedure after installation.

What frequency does this TPMS sensor use?
It operates at 433MHz, which matches the original BMW TPMS frequency.

How long does the battery last?
The battery life is about 3 years under normal driving conditions.

Do I need to program this sensor before installation?
No programming is needed because the sensor is pre-programmed. Perform a relearn procedure after installation to sync it with your vehicle.

Which BMW models is this sensor designed for?
It is designed for 2014-2022 BMW 4-Series models, including F32, F33, and F36. Match your vehicle year and model before ordering.

This direct-fit TPMS tire pressure sensor is designed for the Chery Tiggo 8 Pro Plus and Tiggo 7 Pro models. It uses the original part numbers 802000121AA and 802000126AA, ensuring a precise match for your vehicle's monitoring system.

Keeping your tires at the correct pressure is key to safe driving and better fuel economy. This sensor provides real-time pressure data to your dashboard, helping you avoid uneven tire wear and potential blowouts. It is a simple replacement for a lost or failing unit.

The sensor is built with durable ABS material to withstand road conditions and temperature changes. Before you place your order, please check your vehicle model or the part number to confirm compatibility. You can also message us your Vehicle Identification Number for verification.

Key Features and Benefits

- OEM replacement design that ensures a direct fit for Chery Tiggo 8 Pro Plus and Tiggo 7 Pro vehicles.

• Real-time pressure monitoring that helps you maintain optimal tire pressure for safety and fuel efficiency.

• Durable ABS construction that resists impact and weather exposure for long-lasting performance.

• Easy installation as a direct replacement for the original sensor without needing special modifications.

Who Is This For

- Chery Tiggo 8 Pro Plus owners needing a replacement for a damaged or dead tire pressure sensor.

• Chery Tiggo 7 Pro drivers who want to restore their vehicle's TPMS functionality.

• Mechanics or DIY car enthusiasts looking for an OEM-spec sensor for a repair job.

• Anyone who has lost a sensor or needs a spare for their Chery SUV.

Usage Scenario

Mark noticed his dashboard warning light for the tire pressure system was on. After checking his tires, he realized one of the sensors had stopped working. He ordered this replacement for his Chery Tiggo 8 Pro Plus. After installing it, the warning light went off, and he could see his tire pressures again on the display. He felt more confident driving, knowing the system was back to normal.

Micro Comparison

Unlike generic universal sensors that may require programming or adapters, this sensor is designed specifically for Chery Tiggo models. It uses the original part numbers 802000121AA and 802000126AA, which means it should work as a direct replacement without extra steps. This saves time and reduces the risk of compatibility issues.

Specifications

- Material: ABS

• Model Number: 802000121AA, 802000126AA

Package Includes

- 1 x TPMS Tire Pressure Sensor

Why You Will Love It

You will appreciate the peace of mind that comes from a fully functional tire pressure monitoring system. This sensor helps you catch slow leaks early and keeps your tire pressure where it should be. It is a straightforward fix that restores an important safety feature on your Chery.

Questions and Answers

Question: Will this sensor fit my Chery Tiggo 7 Pro?

Answer: Yes, it is designed for both the Chery Tiggo 8 Pro Plus and Tiggo 7 Pro, using part numbers 802000121AA and 802000126AA.

Question: Do I need to program the sensor after installation?

Answer: This sensor is designed as a direct replacement. For most vehicles, it should sync automatically with your car's system, but you may need to drive for a few minutes for it to register.

Question: What is the sensor made of?

Answer: The sensor body is made of durable ABS material.

Question: How do I know if this is the right part for my car?

Answer: Please check your vehicle model or the original part number. You can also contact us with your Vehicle Identification Number, and we can help confirm compatibility.

Question: How many sensors are included in the package?

Answer: The package includes 1 sensor. If you need to replace multiple sensors, please order the required quantity.

Keep your Chevrolet Camaro driving safely with a tire pressure sensor that fits 2016 to 2019 models. This 433MHz TPMS sensor replaces OEM part numbers 13598787 and 13540598. It comes pre-programmed for your specific vehicle, so no sensor programming is needed before installation.

Your tires are the only part of your car that touches the road. A properly working tire pressure monitoring system helps you catch low pressure or temperature changes early. This sensor gives you the information you need to avoid tire-related problems and keep your drive stable and controlled.

The sensor is built from ABS and metal for durability. It works as a direct replacement for your original equipment, which makes the swap straightforward. With a battery life of about three years, you get long-term reliability without frequent changes.

Whether you are replacing a single faulty sensor or upgrading all four at once, this TPMS unit integrates with your Chevrolet Camaro's onboard system. It helps you stay aware of your tire conditions every time you get behind the wheel.

Key Features and Benefits

- Pre-programmed for your vehicle that means no sensor programming required before installation

• 433MHz operating frequency that ensures reliable communication with your car's TPMS module

• Direct replacement design that makes installation simple and matches your original equipment fit

• ABS and metal construction that provides durability against road conditions and vibration

• About three years of battery life that reduces the need for frequent sensor replacements

Who Is This For

- Chevrolet Camaro owners with model years 2016 through 2019 who need a reliable TPMS replacement

• Drivers who want to replace one or more faulty tire pressure sensors without visiting a dealership

• Car enthusiasts performing routine maintenance who prefer a pre-programmed plug-and-play sensor

• Owners of compatible Buick Cascada or Cadillac ATS and CTS models from the listed years

Usage Scenario

Mark noticed his Camaro's tire pressure warning light flickering on his morning commute. He checked the pressures manually but one tire kept losing air slowly. After confirming the sensor was the issue, he ordered this direct replacement unit. He removed the old sensor, installed the new one, and performed a stationary relearn using a compatible scan tool. The warning light went off and his dashboard now shows accurate pressure readings again.

Micro Comparison

Many generic TPMS sensors require complex programming or cloning before they will work with your car. This sensor comes pre-programmed for your specific Chevrolet Camaro make, model, and year. You still need to activate it using a relearn procedure, but you skip the programming step entirely. That saves time and reduces the chance of compatibility errors.

Specifications

Condition: Brand New

Manufacture Part Number: 13598787

Replacement Part Numbers: 13598787, 13540598, 3604200U7053

Operating Frequency: 433MHz

Product Material: ABS+Metal

Battery Life: About 3 Year

Fitment Type: Direct Replacement

Color: As the pictures show

Package Includes

1 or 4 Pieces Tire Pressure Sensor (depending on selected quantity)

Why You Will Love It

You get a sensor that matches your Camaro's factory specifications without the dealership price tag. The pre-programmed design removes one of the most confusing steps in TPMS replacement. Knowing your tire pressure is monitored correctly gives you confidence on every drive.

Questions and Answers

Question: Will this sensor fit my 2018 Chevrolet Camaro SS?

Answer: Yes, this sensor fits Chevrolet Camaro models from 2016 to 2019, including the SS trim.

Question: Do I need to program this sensor before installing it?

Answer: No. The sensor comes pre-programmed for your vehicle. You only need to perform a relearn procedure after installation.

Question: What is the difference between stationary relearn and automatic relearn?

Answer: Stationary relearn requires you to put the vehicle in learn mode using a scan tool. Automatic relearn completes by driving the vehicle after installation.

Question: Can I install this sensor myself?

Answer: Installation is recommended only by trained professionals. It involves dismounting the tire and handling the sensor and valve stem correctly.

Question: How do I know if this sensor matches my old part number?

Answer: Check your existing sensor for part number 13598787 or 13540598. If the numbers match, this sensor will work with your vehicle.

Keep your tire pressure monitoring system working reliably with this 433MHz TPMS sensor. Designed as a direct replacement for Chrysler, Dodge, Jeep, and Lancia models, this sensor comes pre-programmed to match your vehicle's make, model, and year. No sensor programming is required, which simplifies the installation process.

This sensor is built with a PCBA board and battery for long-lasting performance. It communicates at 433MHz to provide accurate tire pressure readings to your vehicle's onboard computer. The sensor is a 100% new unit that helps you maintain proper tire inflation for better fuel economy and safer driving.

Installation is straightforward for trained professionals. After installation, you will need to activate the sensors using a scan tool or perform a "re-learning" procedure with an OBDII tool. This ensures the sensors sync correctly with your vehicle's TPMS system.

Whether you are replacing a faulty sensor or upgrading an older system, this TPMS sensor offers a dependable solution. It is compatible with a wide range of Chrysler, Dodge, Jeep, and Lancia models, covering production years from 2010 to 2021.

Key Features and Benefits

- Pre-programmed for your specific vehicle that saves you time and eliminates the need for complex programming setups

• 433MHz frequency that ensures reliable communication with your vehicle's TPMS system

• Compatible with multiple Chrysler, Dodge, Jeep, and Lancia models that offers a versatile replacement option

• 100% new sensor construction that provides dependable performance and accurate pressure readings

• Simplified relearn process using OBDII that makes activation straightforward for trained installers

Who Is This For

- Chrysler 300 and 300C owners from model years 2012 to 2021 who need a direct replacement TPMS sensor

• Dodge Challenger drivers with vehicles manufactured between 2011 and 2021 looking for a reliable sensor upgrade

• Jeep Grand Cherokee owners with models from 2010 to 2016 seeking a pre-programmed TPMS solution

• Mechanics and auto repair shops that need a versatile sensor compatible with multiple Chrysler, Dodge, and Jeep models

Usage Scenario

Mark noticed his Dodge Charger's tire pressure warning light flickering on during his morning commute. After checking his tires and finding no visible issues, he realized the TPMS sensor was failing. He ordered this 433MHz pre-programmed sensor and had his mechanic install it. After a quick OBDII relearn procedure, the warning light turned off, and his TPMS system has been working accurately ever since.

Micro Comparison

Unlike generic TPMS sensors that require manual programming for each vehicle, this sensor comes pre-programmed specifically for your Chrysler, Dodge, Jeep, or Lancia model. This saves you the hassle of programming tools and reduces installation time. The sensor is also compatible with a broad range of models, making it a versatile choice for multi-vehicle households or repair shops.

Specifications

- Material: PCBA board and battery

• Product Frequency: 433MHz

• OEM Part Numbers: 56029400AC, 56029400AE, 56029400AA, 56029400AD, 68374924AA

• Model Numbers: 56029400AC, 56029400AE

Package Includes

- 1 or 4 TPMS Tire Pressure Sensor(s) (depending on selection)

Why You Will Love It

No programming means less hassle and faster installation. You get a sensor that works right out of the box with your specific vehicle. It helps you maintain proper tire pressure, improving your fuel economy and giving you peace of mind on every drive.

Questions and Answers

Question: Do I need to program this sensor myself?

Answer: No, this sensor comes pre-programmed for your specific vehicle make, model, and year. You only need to activate it with a scan tool or perform a relearn procedure using an OBDII tool.

Question: What vehicles are compatible with this TPMS sensor?

Answer: This sensor is compatible with Chrysler 300 (2012-2021), Chrysler 300C (2012-2021), Dodge Challenger (2011-2021), Dodge Charger (2015-2021), Jeep Grand Cherokee (2010-2016), Dodge Viper (2013-2019), and Lancia Thema (2011-2016).

Question: How do I activate the sensor after installation?

Answer: After installation, you need to activate the sensors using a scan tool or perform a "re-learning" procedure. This typically requires an OBDII tool to sync the sensors with your vehicle's TPMS system.

Question: Is this sensor a direct replacement for my original one?

Answer: Yes, this sensor is designed as a direct replacement. Please confirm your vehicle's OEM part number matches one of the compatible numbers: 56029400AC, 56029400AE, 56029400AA, 56029400AD, or 68374924AA.

Question: Can I install this sensor myself?

Answer: Installation of TPMS sensors is recommended to be performed only by trained professionals. The sensor needs to be properly mounted and then activated with the correct tools.

Key Features

• Pre-Programmed Setup — It comes pre-programmed for the vehicle make, model, and year, so it needs no additional programming.
• Direct Replacement Part — It replaces your original sensor directly, which simplifies the installation process.
• Sensitive Pressure Readings — Its durable, stable, and sensitive design is built for accurate tire pressure readings.
• Four-Pack Option — It is sold as a 4 pack, so all four wheels can be serviced at once.

Product Specifications

• Frequency: 433MHz
• Piece Count: 4 pack
• Material: PCBA board and battery
• Part numbers: 40700-3JA0B, 40700-3JA0A

What It Is / How It Works

This is a 433MHz TPMS tire pressure sensor, a direct replacement part for the tire pressure monitoring system in Infiniti and Nissan vehicles. Tire pressure sensors sit in each wheel and send pressure readings to the vehicle, so a failed unit can switch on a monitoring warning light.

Who It's For / Use Cases

Infiniti and Nissan owners who need to replace a faulty or dead TPMS sensor are the main buyers. Drivers who want their tire pressure monitoring system working fully again also use this type of replacement sensor.

How to Use / Care

1. Use the sensor to monitor tire pressure, which alerts you to pressure changes in your tires.
2. After installation, perform the re-learning procedure with a TPMS scan tool or an OBDII device to activate the sensors.
3. Have the installation done by a trained professional, as recommended for proper fit and function.

How to Choose

Start with the number of sensors. The 4 pack replaces all four wheels at once, while the 1-pack includes a single sensor for one wheel.

Confirm your vehicle's OE part number before ordering. Compare it with 40700-3JA0A or 40700-3JA0B so the sensor matches your original part.

Choose a 433MHz sensor, the frequency this unit uses, when replacing a tire pressure sensor in a monitoring system that operates at that frequency.

Frequently Asked Questions

Do these sensors need programming before installation?
No. They come pre-programmed for the specific vehicle make, model, and year and do not require additional programming.

How do I activate the sensors after installation?
A re-learning procedure using a TPMS scan tool or an OBDII device activates the sensors.

What is the difference between the 1-pack and the 4-pack?
The 1-pack includes a single sensor, while the 4-pack includes four sensors so you can replace all of them at once.

Can I install these sensors myself?
Installation is possible, but a trained professional is recommended to ensure proper fit and function.

Are these sensors compatible with a 2015 Nissan Altima?
Yes. It fits the Nissan Altima from 2015-01 to 2019-02. Confirm your vehicle's OE part number before ordering.

Key Features

• Pre-Programmed Sensors — Each sensor comes pre-programmed for the vehicle's make, model and year, which simplifies installation.
• 433MHz Operation — The sensors operate at 433MHz to match the vehicle's receiver for accurate communication.
• About Three-Year Battery — Battery life is about 3 years, which reduces how often the sensors need replacing.
• Four-Sensor Set — The set includes four sensors so all wheels can be replaced at once for consistent monitoring.

Product Specifications

• Piece Count: 4PCS
• Frequency: 433MHz
• Battery Life: About 3 years
• Part number: 68339096AB

What It Is / How It Works

These are tire pressure monitoring sensors sold as a four-piece set for Jeep vehicles. They replace OEM part number 68339096AB and come pre-programmed for the vehicle's make, model and year. When a sensor detects low pressure, it sends a signal to the dashboard display so the driver can act.

Who It's For / Use Cases

These sensors suit Jeep owners with 2021-2022 Grand Cherokee, 2022 Grand Wagoneer or 2021-2022 Wrangler models who need tire pressure monitor replacement. They also suit drivers who want accurate pressure monitoring for safety and fuel efficiency, and DIY mechanics who want a direct-fit set.

How to Use / Care

1. Have a shop mount and balance the new sensors on the wheels.
2. Use a scan tool to run the relearning procedure that activates the sensors after mounting.

How to Choose

Start with the vehicle: confirm your Jeep model and model year match the 2021-2022 Grand Cherokee, 2022 Grand Wagoneer or 2021-2022 Wrangler listing. Next, compare OEM number 68339096AB with the sensor you are replacing. Choose the four-sensor set when you want all wheels updated together.

Frequently Asked Questions

Which Jeep models are these sensors designed for?
They are designed for 2021-2022 Jeep Grand Cherokee, 2022 Grand Wagoneer and 2021-2022 Wrangler models, and they come pre-programmed for each vehicle's make, model and year.

Do the sensors need programming before installation?
They come pre-programmed, but installation requires a scan tool or relearning procedure to activate the sensors after mounting, so the sensors communicate with the Jeep's onboard system.

How long does the battery last?
Battery life is about 3 years, which means fewer replacements over time than a shorter-lived sensor would need.

What frequency do the sensors use?
They operate at 433MHz, which matches the vehicle's receiver for accurate communication with the dashboard display.

Keep your Opel driving safely with a direct-fit TPMS sensor that arrives pre-programmed for your specific model. This 433MHz replacement sensor monitors tire pressure and temperature in real-time, helping you avoid dangerous blowouts and uneven tire wear. No sensor programming is needed, so you can focus on a quick installation and get back on the road with confidence.

Each sensor is designed to match the original equipment specifications for a wide range of Opel vehicles, including the Adam, Astra J, Corsa D, Insignia, and Zafira C. The durable construction ensures long-lasting performance in various weather conditions. After installation, you will need to activate the sensors using a compatible TPMS scan tool or your vehicle's relearn procedure.

Driving with properly inflated tires improves fuel economy, extends tire life, and enhances vehicle handling. This TPMS sensor provides the data your car's system needs to alert you to pressure drops. Whether you are replacing a faulty sensor or upgrading all four, this set offers a reliable solution for maintaining optimal tire health.

Installation is straightforward for a trained professional. The sensor comes with the necessary valve stem and hardware. Once mounted and activated, it will communicate seamlessly with your vehicle's onboard TPMS system, giving you peace of mind on every trip.

Key Features and Benefits

- Pre-programmed for Opel vehicles that requires no additional sensor programming, saving you time and setup hassle

• 433MHz operating frequency that ensures reliable communication with your vehicle's TPMS module

• Monitors tire pressure and temperature in real-time to help prevent accidents caused by tire failure

• Compatible with multiple relearn methods including stationary, automatic, and OBD procedures for flexible activation

• Direct replacement design that matches original part numbers for a simple, secure fit

Who Is This For

- Opel owners needing to replace a failed or damaged TPMS sensor on models like Adam, Antara, Astra J, or Insignia

• Drivers who want to maintain factory-specified tire monitoring without visiting a dealership for programming

• Mechanics and DIY enthusiasts looking for a cost-effective, pre-configured sensor for a quick installation

• Fleet managers maintaining multiple Opel vehicles who need consistent, reliable TPMS replacements

Usage Scenario

Mark noticed his Opel Insignia's tire pressure warning light staying on after rotating his tires. He checked the pressures, but the light would not reset. Instead of a costly dealership visit, he ordered this pre-programmed TPMS sensor. After a professional tire shop mounted it and performed an OBD relearn, the warning light turned off and his dashboard showed accurate pressures again. Mark now drives with confidence knowing his TPMS is working correctly.

Micro Comparison

Unlike universal sensors that require complex cloning or programming tools, this TPMS arrives ready to install for your specific Opel model. While generic sensors may need additional steps to pair with your vehicle, this unit is pre-configured to match the original part numbers. This saves you time and reduces the risk of compatibility issues.

Specifications

Part Number: 13506028

Replacement Part Numbers: 13516165, 13598773, 13540602, 13540603, 13589601, 13522629

Operating Frequency: 433MHz

Material: 13598773 13516165

Package Includes

- 1 or 4 Tire Pressure Sensors (depending on selected quantity)

Why You Will Love It

You get a direct-fit sensor that eliminates the stress of programming and the expense of a dealership visit. It restores your vehicle's safety system quickly, helping you maintain proper tire pressure for better fuel mileage and longer tire life. With a simple installation and reliable performance, this sensor gets you back to worry-free driving.

Questions and Answers

Question: Do I need to program this sensor before installing it?

Answer: No, the sensor comes pre-programmed for your specific Opel model. You only need to activate it using a relearn procedure after installation.

Question: What vehicles does this TPMS sensor fit?

Answer: It fits Opel Adam (2012-2017), Ampera (2011-2017), Antara (2006-2017), Astra J (2009-2017), Astra K (2015-2017), Corsa D (2006-2017), Corsa E (2014-2017), Insignia (2008-2017), Meriva B (2010-2017), Mokka (2012-2017), and Zafira C (2011-2017).

Question: How do I activate the sensor after installation?

Answer: You can use a compatible TPMS scan tool or follow your vehicle's relearn procedure, which may be stationary, automatic, or OBD-based. Consult your owner's manual for the correct method.

Question: Can I install this sensor myself?

Answer: Installation requires dismounting the tire and is recommended to be performed only by trained professionals to ensure proper mounting and avoid damage.

Question: How do I confirm this sensor will work with my car?

Answer: Check your existing part number against the list provided (13506028, 13516165, 13598773, 13540602, 13540603, 13589601, 13522629). If your number matches, the sensor will fit. You can also verify your vehicle's year and model from the fitment list.

Keep your Tesla's tire pressure readings accurate and reliable with this BLE Bluetooth TPMS sensor. Designed to replace original part numbers 1490701-01-B and 1490701-01-C, it offers a direct fit for Model 3, Y, S, and X from 2020 to 2025. This sensor uses Bluetooth technology to communicate with your vehicle's system, giving you real-time pressure and temperature data on your dashboard.

Built with a durable ABS and metal construction, this sensor is made to withstand road conditions while maintaining a long battery life of about five years. It is a new, OEM-grade replacement that restores the safety and convenience of your factory tire pressure monitoring system. Professional installation is recommended to ensure proper function and a secure seal.

Each sensor is pre-programmed to match the specifications of your Tesla, making the setup process straightforward with the right TPMS tool. You will need a trigger tool to teach the new sensor IDs to your vehicle, a standard step for TPMS replacements. This ensures the system recognizes each wheel and provides accurate alerts.

Before purchasing, double-check the part number on your existing sensor to confirm compatibility. This replacement is designed for Tesla models with the original part numbers listed, ensuring a seamless upgrade for your tire monitoring needs.

Key Features and Benefits

- Bluetooth BLE connectivity that provides real-time tire pressure and temperature data to your Tesla dashboard

• ABS and metal construction that offers durability and long-lasting performance on the road

• About five years of battery life that reduces the frequency of sensor replacements and maintenance

• Direct replacement for OE numbers 1490701-01-B and 1490701-01-C that ensures a proper fit for your Tesla

• New condition that restores full TPMS functionality without reusing worn components

Who Is This For

- Tesla Model 3 owners from 2020 to 2025 who need a reliable TPMS sensor replacement

• Tesla Model Y owners from 2020 to 2025 looking for a direct OE replacement part

• Tesla Model S owners from 2022 to 2025 who want to maintain accurate tire pressure monitoring

• Tesla Model X owners from 2021 to 2025 upgrading their tire pressure sensors

Usage Scenario

James noticed his Tesla Model 3 dashboard showing a tire pressure warning light every morning. After checking the tire pressures manually, he realized one of his TPMS sensors had stopped communicating. He ordered this Bluetooth replacement sensor, had a professional tire shop install it, and used a TPMS trigger tool to teach the new ID to his car. The warning light disappeared, and now he sees live pressure readings for each tire on his center display during his daily commute.

Micro Comparison

Many generic TPMS sensors require complex programming or may not communicate correctly with Tesla's BLE system. This sensor is designed specifically for Tesla models and replaces the original 1490701-01-B and 1490701-01-C parts, so you get the same Bluetooth communication standard as the factory sensor. It is a straightforward replacement that keeps your vehicle's system running as intended.

Specifications

- Material: ABS + Metal

• Model Number: 1490701

• OE Numbers: 1490701-01-B, 1490701-01-C, 149070101B

• Sensor Operating Frequency: Bluetooth TPMS

• Battery Life: About 5 years

• Condition: New

Package Includes

- 1 x BLE Bluetooth TPMS Sensor

Why You Will Love It

Driving with confidence knowing your tire pressure is monitored accurately at all times. This sensor restores factory-level safety and convenience without the dealership price tag. It is a simple, reliable upgrade that keeps your Tesla running smoothly.

Questions and Answers

Question: Does this sensor work with my 2023 Tesla Model Y?

Answer: Yes, it is compatible with Tesla Model Y from 2020 to 2025.

Question: Do I need a special tool to install this sensor?

Answer: Yes, a proper TPMS trigger tool is required to learn the new sensor IDs to your vehicle.

Question: How long does the battery last in this sensor?

Answer: The battery life is about five years under normal driving conditions.

Question: Is this sensor pre-programmed or does it need coding?

Answer: It is designed for Tesla and requires a TPMS tool to teach the new IDs to your vehicle.

Question: Can I install this sensor myself?

Answer: Professional installation is recommended to ensure proper function and a secure seal.

Key Features

• Direct-Fit Lexus Replacement — It is a direct-fit replacement for specific Lexus GS, ES, and LS models, so it is meant to keep a proper seal and accurate readings.
• 433 MHz Operation — The sensors run at 433 MHz, matching the original system for reliable communication with the vehicle.
• ABS and Metal Build — Each sensor combines ABS and metal construction, built to handle vibration and road debris.
• About Five-Year Battery — The battery lasts about five years, so the sensors need replacing less often.
• Four-Sensor Set — The set includes four sensors, a complete system replacement for most vehicles.

Product Specifications

• Material: ABS and metal
• Operating Frequency: 433 MHz
• Battery Life: Approximately 5 years
• Pack: 4 sensors
• OEM Number: PMV-107K, 42607-50011, 42607-50010
• Condition: New

What It Is / How It Works

These are TPMS tire pressure sensors sold as a set of four, each made of ABS and metal. They are direct-fit replacements for the original sensors in specific Lexus GS, ES, and LS models from 2005 to 2012.

Who It's For / Use Cases

These sensors suit Lexus owners who need to replace faulty or dead TPMS sensors on a GS, ES, or LS from 2005 to 2012. Drivers who want their tire pressure monitoring system working correctly again are the typical buyers, and so are mechanics doing routine TPMS service on these models.

How to Use / Care

1. Before replacing the sensors, double-check the part numbers on your existing sensors against 42607-50010 and 42607-50011.
2. At a service center, the technician removes the old sensors and installs the new ones.
3. The technician uses a TPMS tool to program the new sensor IDs to the vehicle.

How to Choose

Start with your vehicle: these sensors are made for Lexus GS, ES, and LS models from 2005 to 2012, so confirm your model and year fall in that range. Check the part numbers on your old sensors against the OEM numbers in Product Specifications. Choose the four-sensor set when you are replacing the full system, since it matches the quantity needed for most vehicles.

Frequently Asked Questions

Which vehicles are these sensors for?
They are direct-fit replacements for specific Lexus GS, ES, and LS models from 2005 to 2012, and they replace the original equipment sensors.

How many sensors are in the set?
The set includes four sensors, matching the quantity needed for most vehicles. The OEM numbers are PMV-107K, 42607-50011, and 42607-50010.

What frequency do the sensors use?
They operate at 433 MHz, matching the original system for reliable communication with the vehicle.

How long does the battery last?
The battery life is about five years, which reduces how often the sensors need replacing.

Do I need a tool to install them?
A TPMS tool is required to learn the new sensor IDs to the vehicle's system, and installation is typically done by a trained professional.

Key Features

• Real-Time Tire Alerts — It monitors tire pressure and temperature in real time and warns of low or high pressure, rapid air leaks, high tire temperature and low battery voltage.
• Four-Tire Monitoring — It tracks the pressure and temperature of all 4 tires.
• Wireless Sensor Link — It connects wirelessly to interior and external sensors.
• Solar or USB Power — The display is solar powered and can run on USB cable power.
• Clear LCD Display — The digital LCD shows tire information clearly.

Product Specifications

• Material: ABS and metal
• Display Powered: Solar powered, USB cable powered
• Working Frequency: 433.9200MHz ± 0.05Mhz
• Pressure Monitoring Range: 0-6.8bar
• Temperature Monitoring Range: -20℃~ +70℃
• Precision: temp ±2℃ ; pressure ±0.1bar

What It Is / How It Works

This is one set of car tire pressure monitoring system (TPMS), with external sensors and a digital LCD display that shows tire pressure and temperature.

How to Use / Care

1. Turn on the host before you install the sensors.
2. Install the interior and external sensors, which connect to the host wirelessly.

Frequently Asked Questions

What does the system monitor?
It monitors tire pressure and temperature for all 4 tires in real time. It sends alerts for low tire pressure, high tire pressure, rapid air leaks, high tire temperature and low battery voltage.

What are the measuring ranges?
The pressure monitoring range is 0-6.8bar and the temperature monitoring range is -20℃~ +70℃. Precision is ±2℃ for temperature and ±0.1bar for pressure.

How is the display powered?
The display is solar powered and can also be powered by a USB cable.

What frequency do the sensors use?
The sensors work at 433.9200MHz ± 0.05Mhz.

Key Features

• TPU Material — The front armrest box cover is made from TPU.
• Toyota Highlander Fit — The cover is made for the Toyota Highlander ASU50 and is sized for model years 2015 to 2021.
• No Cutting Needed — Its connector is designed to match the vehicle without cutting or splicing.

Product Specifications

• Material: TPU
• Vehicle model: Toyota Highlander ASU50; Toyota Highlander ASU50 15-21
• Model years: 2015-2021
• Package contents: 1 front armrest box cover
• Measurement tolerance: +/- 1-3cm

What It Is / How It Works

This is a front armrest box cover, a replacement lid for the center console storage box in a Toyota Highlander ASU50. It is sized for the 2015–2021 model years.

Who It's For / Use Cases

Armrest box covers suit drivers and passengers who want a replacement console lid for a car's front armrest storage box. They are most relevant to owners of the matching vehicle who need the lid itself rather than a whole new console.

How to Use / Care

1. Use it as a replacement front armrest box lid for the Toyota Highlander ASU50.

How to Choose

Start with the vehicle. Confirm the model and year range in Product Specifications against your car before ordering. Armrest box covers differ by vehicle, so a lid made for one model may not match another.

Check that the storage box in your car is the front armrest type that this cover replaces. Choose the cover by the model and year range first, then confirm the material suits how you expect the lid to be handled.

Frequently Asked Questions

Which vehicle is this cover made for?
It is made for the Toyota Highlander ASU50, with model years 2015 to 2021. Compare those years with your car before ordering.

What material is the cover?
It is made from TPU. Product Specifications lists TPU under Material.

Is anything else in the package?
One front armrest box cover is in the package.

Does it need cutting or splicing?
No cutting or splicing is needed, because the connector is designed to match the vehicle without it.

Why might the color look different from expectations?
Lighting and screen settings can make the color look a little different from the real cover. The measurement allowed error is +/- 1-3cm.

Key Features

• Soft TPU Material — This car key cover is made from soft TPU, which offers a comfortable feel and some flexibility.
• Color Options — Available in black, white, or gray to suit your preference.

Product Specifications

• Brand Name: KOLEN
• Material: Soft TPU
• Color: Black, White, Gray

What It Is / How It Works

This is a protective cover for a car key fob. It is a soft TPU shell that fits over your existing key to help shield it from scratches and minor impacts. The cover does not include the key itself.

Who It's For / Use Cases

Car key covers are useful for anyone who wants to keep their key fob looking clean and protected from everyday wear. They are especially handy for people who carry keys in pockets or bags where they may rub against other items.

How to Use / Care

1. Slide the soft TPU cover over your car key fob, aligning it with the shape of the key.
2. Press the cover gently to ensure it fits snugly around the key.
3. To clean, wipe the cover with a soft, damp cloth and let it air dry.

How to Choose

When choosing a car key cover, consider the material for durability and feel, and the color to match your style.

Frequently Asked Questions

Does this cover include the car key?
No, the package includes only the cover. The key itself is not included.

What materials is this cover made of?
The cover is made of soft TPU, which provides a flexible and comfortable fit.

What color options are available?
This cover is available in black, white, and gray.

Key Features

• Flexible TPU Build — Made from TPU, this key case cover bends and stretches to fit your car key fob snugly.

Product Specifications

• Brand Name: Kuvi
• Material: TPU

What It Is / How It Works

This is a TPU key case cover designed to fit car key fobs. It slips over your existing key to help shield it from daily wear and tear.

Who It's For / Use Cases

Key covers are for anyone who carries their car keys in a pocket or bag and wants to reduce scratches and scuffs on the fob. They also add a bit of color and grip, making the key easier to hold and find.

How to Use / Care

1. Slide the cover over your key fob, aligning any cutouts with the buttons.
2. Press the edges to ensure a snug fit, then test the buttons to confirm they respond.
3. To clean, wipe the cover with a soft, damp cloth and let it air dry.

How to Choose

When choosing a key case cover, consider the material for flexibility and durability. TPU is a common choice because it stretches and returns to shape.

Frequently Asked Questions

What material is this key case cover made of?
It is made from TPU, a flexible plastic that helps the cover stretch over your key fob and absorb minor impacts.

Will this cover fit my car key?
Key covers are sized to fit specific key fob shapes. Check the dimensions and button layout of your fob against the cover's design before purchasing.

How do I clean the key case cover?
Wipe it with a soft, damp cloth and let it air dry. Avoid harsh chemicals that could damage the TPU.

Key Features

• Plastic Build — It is made of plastic and is sold as a car interior film sticker.

Product Specifications

• Material: Plastic
• Sticker Placement: Internal

What It Is / How It Works

This car interior film is a sticker for the inside of a vehicle. Car interior films are thin sheets applied to interior surfaces to add a protective layer.

Who It's For / Use Cases

Car interior films suit drivers who want a clear protective layer on the interior surfaces of their vehicle. They are often chosen by owners who want to protect interior parts of the car from everyday contact.

How to Use / Care

1. Use it as a protective film on car interior surfaces.

How to Choose

Start with the interior area you want to cover and measure it before choosing a film size. Check the material and placement in the specifications to confirm it is a plastic film for internal use. Pick a film whose size matches the area you measured.

Frequently Asked Questions

What is the film made of?
It is made of plastic.

Where is it placed?
It is an internal sticker, so it is meant for the inside of the vehicle.

Is it meant for exterior surfaces?
It is placed internally, so it is made for interior surfaces of the car rather than the outside.

Who is it for?
It suits drivers who want a plastic protective layer on the inside of their car.

How should I pick the right size?
Measure the interior area you plan to cover before buying, then choose a film that matches that area.

Key Features

• Flexible TPU Shell — This key case cover is made from TPU, a flexible material that helps absorb light bumps and daily wear.

Product Specifications

• Brand Name: Kuvi
• Material: TPU

What It Is / How It Works

This is a TPU key case cover designed to fit a range of Peugeot and Citroen car keys. It is a protective shell that wraps around your key fob.

Who It's For / Use Cases

Car key covers are for drivers who want to keep their key fob looking clean and protect it from scratches and minor drops. They are also a simple way to add a bit of color or texture to an everyday item.

How to Use / Care

1. Slide the key fob into the cover, aligning the buttons with the cutouts.
2. Press the fob firmly to ensure it sits snugly inside the shell.

How to Choose

When choosing a key case cover, consider the material for flexibility and durability, and make sure it matches your key fob's shape and button layout.

Frequently Asked Questions

What material is this key case cover made of?
It is made of TPU, a flexible plastic that helps protect the key fob from scratches and minor impacts.

Which brand makes this key case cover?
This key case cover is from Kuvi.

Key Features

• Flexible TPU Build — Made from TPU, this key case cover is flexible and durable.

Product Specifications

• Brand Name: Kuvi
• Material: TPU

What It Is / How It Works

This is a TPU key case cover, designed to fit Mercedes Benz key fobs. It provides a protective shell that helps shield the key from scratches and daily wear.

Who It's For / Use Cases

Key case covers are for Mercedes Benz owners who want to keep their key fob looking new. They suit anyone who carries keys in pockets or bags and wants a layer of protection against scratches and minor impacts.

How to Use / Care

1. Slide the key fob into the TPU cover, aligning it with the cutouts.
2. Press the edges to ensure a snug fit around the fob.

How to Choose

When choosing a key case cover, consider the material for flexibility and durability. TPU offers a balance of softness and protection.

Frequently Asked Questions

What material is this key case cover made of?
This key case cover is made from TPU, a flexible and durable material.

Will this cover fit my Mercedes key fob?
This cover is designed for Mercedes Benz key fobs, but it's best to check the shape and button layout of your specific fob to ensure a proper fit.

Key Features

• Flexible TPU Build — This car key case is made from TPU, a flexible material that helps absorb everyday bumps and drops.

Product Specifications

• Material: TPU

What It Is / How It Works

This is a protective case for car key fobs, designed to fit a range of Toyota models. It wraps around the key to help shield it from scratches and minor impacts.

Who It's For / Use Cases

Car key cases suit Toyota owners who want to keep their key fob looking fresh and reduce wear from daily handling. They are handy for anyone who carries keys in a pocket or bag with other items.

How to Use / Install / Care

1. Clean the key fob to remove dust and oils.
2. Align the case with the key fob, matching the button openings.
3. Press the case around the fob until it snaps into place.
4. Check that all buttons are accessible and the case sits securely.

How to Choose

When choosing a car key case, match it to your key fob model. Check the Product Specifications section for compatible models to ensure a proper fit.

Frequently Asked Questions

What material is this key case made of?
It is made from TPU, a flexible plastic that helps absorb minor impacts.

Will this case fit my Toyota key fob?
This case is designed for specific Toyota models. Refer to the Product Specifications section for the compatible models list.

How do I install the case?
Clean the fob, align the case with the button openings, press it on, and check that everything fits securely.

Key Features

• Soft TPU Material — The cover is made of soft TPU, a flexible plastic that wraps the key body.
• Protective Key Cover — It works as a protective cover for a car key.

Product Specifications

• Color: Gold
• Material: Soft TPU
• Package Contents: One car key cover; the car key is not included

What It Is / How It Works

This car key case is a protective cover for a car key, and the cover is made of soft TPU. The pack has one car key cover, and the car key itself is not included.

Who It's For / Use Cases

Car key cases suit drivers who want an extra protective cover on a car key that is carried every day in a pocket, bag or purse.

How to Use / Care

1. Use it as a protective case for a car key.

How to Choose

Start by checking that the car key is the one you plan to cover, since the key itself is not included. The cover is gold and made of soft TPU, so those are the first points to compare when choosing a car key case.

Frequently Asked Questions

Is the car key included?
No. The pack has one car key cover, and the car key itself is not included.

What is the cover made of?
It is made of soft TPU.

What color is the car key cover?
It is gold.

How many covers come in one pack?
The pack has one car key cover.

Key Features

• Flexible TPU Build — Made from TPU, this key case cover is flexible and durable for everyday use.

Product Specifications

• Brand Name: Kuvi
• Material: TPU

What It Is / How It Works

This is a TPU key case cover from Kuvi, designed to fit certain Toyota key fobs. It helps protect the key from scratches and minor impacts while adding a layer of grip.

Who It's For / Use Cases

Key case covers are useful for anyone who carries their car key daily and wants to keep it in good condition. They are especially handy for people who often drop their keys or toss them into bags or pockets with other items.

How to Use / Care

1. Slide the key fob into the case, aligning the buttons with the openings.
2. Press the case around the edges to ensure it fits snugly.
3. To clean, wipe with a soft, damp cloth and let it air dry.

How to Choose

When choosing a key case cover, consider the material for durability and feel, and check that the design matches your key fob's button layout. TPU offers flexibility and shock absorption, making it a practical choice for everyday protection.

Frequently Asked Questions

What material is this key case cover made of?
This key case cover is made of TPU, a flexible and durable material that helps protect your key fob from scratches and minor drops.

Which brand makes this key case cover?
This key case cover is made by Kuvi, a brand known for car accessories.

How do I clean the key case cover?
You can wipe the cover with a soft, damp cloth and let it air dry. Avoid using harsh chemicals that might damage the TPU material.

Key Features

• PU Material — Made from PU, this film offers a flexible layer for protecting surfaces.
• Center Console Fit — Designed for placement on the center console area, helping shield it from daily wear.

Product Specifications

• Material: PU
• Sticker Placement: Center Console

What It Is / How It Works

This is a protective film for the center console area of a vehicle. It is made from PU and is intended to be applied onto the console surface to help guard against scratches and scuffs.

Who It's For / Use Cases

Car owners who want to keep the center console looking clean and new may find this film useful. It suits those who frequently use the console area and want a layer of protection against everyday contact.

How to Use / Care

1. Before applying a protective film, ensure the surface is clean and dry.
2. Carefully align the film with the area you want to cover, then press it into place.

How to Choose

When selecting a protective film, consider the material and the specific area you intend to cover. Films come in different materials like PU, which offers flexibility.

Frequently Asked Questions

What is this film made of?
This film is made from PU material.

Where is this film intended to be placed?
It is designed for placement on the center console of a vehicle.

Key Features

• Custom Cut Fit — It is cut to fit the central control screen of the BYD Dolphin 2023-2025 without extra trimming.
• Self-Repairing Surface — Minor daily scratches, friction marks and scuffs can repair themselves under normal temperature.
• Wet Paste Installation — The film is applied wet and can be repositioned, and a free installation tool kit is included.

Product Specifications

• Color: Transparent
• Material: TPU
• Compatible models: BYD Dolphin 2023-2025
• Fit area: Central control screen
• Vehicle type: Left-hand drive vehicle models
• Installation method: Wet paste, installation tool kit included

What It Is / How It Works

This transparent TPU protective film is cut for the central control screen of the BYD Dolphin 2023-2025. It is a soft, clear film meant to sit over the screen surface.

Who It's For / Use Cases

Clear protective films of this type suit drivers who want a layer over an in-car central screen to limit everyday scratches, fingerprints and wear from touch. They suit owners of the matching vehicle model who want the original screen look kept while adding that layer.

How to Use / Care

1. Fit the custom-cut film to the central control screen of the BYD Dolphin 2023-2025.
2. Apply the film using the wet paste method and the included installation tool kit.

How to Choose

Choose by vehicle first. The film is cut for the BYD Dolphin 2023-2025 central control screen, so confirm your car is that model before ordering. The Compatible models row in Product Specifications lists the model. For material, the film is transparent TPU, a soft film that suits buyers who want a near-invisible layer over the screen.

Frequently Asked Questions

Which vehicle is this film for?
It is cut for the central control screen of the BYD Dolphin 2023-2025 and is dedicated to left-hand drive vehicle models.

What is the film made of?
It is made of transparent TPU soft film. The clear material helps restore the original screen visual experience with no blurring or color distortion.

Does it affect touch or screen display?
The film is designed so it does not affect touch sensitivity or normal screen display. Its anti-fingerprint, anti-smudge and anti-oil coating keeps bare-hand touch smooth.

How is it installed?
It supports wet paste installation, and a free installation tool kit is included. The film can be repositioned many times during installation without damage.

Does it leave residue when removed?
It is designed to leave no residual glue when removed, which helps protect the original car screen surface.

Key Features

• TPU Soft Film — Made of TPU soft film for the instrument panel display area.
• Mazda 3 BP and CX30 — It is designed for Mazda 3 BP and CX 30 vehicles from 2019 to 2025.
• Mazda CX30 Accessory — It is sold as an accessory for Mazda CX30 cars.
• Model Year Coverage — It covers model years 2019 through 2025.

Product Specifications

• Material: TPU soft film
• Suitable for: For Mazda CX30 Accessories
• Year: 2019 2020 2021 2022 2023 2024 2025

What It Is / How It Works

This car dashboard film is an accessory for the instrument panel display of Mazda vehicles, and it is made of TPU soft film. Dashboard films in general are thin, flexible sheets that sit over the instrument panel area of a car interior, and they are chosen by vehicle make, model and model year.

Who It's For / Use Cases

Owners of Mazda vehicles from the covered model years look for dashboard films that match the shape of their instrument panel. Drivers who want a thin accessory layer for the instrument panel display are the usual buyers in this category, especially those who prefer to match an accessory to their exact car model and year.

How to Use / Care

1. Use it on the instrument panel display area of a matching Mazda vehicle.

How to Choose

Start by confirming that the vehicle make, model and model year match the fitment details in Product Specifications. Next, look at the material, since TPU soft film is the material named for this item. Choose the option that matches your vehicle's exact dashboard design.

Frequently Asked Questions

Which Mazda vehicles is this film made for?
It is an accessory for Mazda CX30 cars, and the fitment covers Mazda 3 BP and CX 30 vehicles from 2019 to 2025. Match your car's make, model and model year before ordering.

What material is the film made from?
It is made from TPU soft film. Dashboard films in general are cut to the instrument panel area, so the fit depends on the car model.

Who makes this dashboard film?
The brand is YaLumei, and the film is made from TPU soft film for the instrument panel display area.

Where is the film placed?
It is meant for the instrument panel display area of a matching Mazda vehicle, and the year range is 2019 through 2025.

Key Features

• Chery Tiggo 7 Pro Fit — It fits the Chery Tiggo 7 Pro 2020 2021 2022.

Product Specifications

• Compatible models: Chery Tiggo 7 Pro 2020 2021 2022
• Sticker Placement: Navigation, AIR PANEL, Gear Panel

What It Is / How It Works

This is a protective film sticker for interior car panels. It suits the navigation, AIR PANEL and Gear Panel areas of the vehicle interior.

Who It's For / Use Cases

Protective film stickers like this suit car owners who want to cover interior trim around the navigation, air panel or gear panel and keep those surfaces looking tidy. They are a practical choice for anyone who wants to protect a dashboard area without replacing the trim itself.

How to Use / Care

1. Use it to protect the navigation, AIR PANEL or Gear Panel area of the car interior.

How to Choose

Start with the vehicle. This sticker fits the Chery Tiggo 7 Pro 2020 2021 2022, so check that your car matches that model and year before you buy. Next, choose the panel area you want to cover: navigation, AIR PANEL or Gear Panel.

Frequently Asked Questions

Which vehicle does it fit?
It fits the Chery Tiggo 7 Pro 2020 2021 2022. Check that your car matches that model and year before you buy.

Does it fit other Chery models?
The fit is given as the Chery Tiggo 7 Pro 2020 2021 2022 only. The Compatible models row in Product Specifications shows the model and years to compare with your car.

Which interior areas does it cover?
It suits the navigation area, the AIR PANEL and the Gear Panel of the vehicle interior.

What kind of product is it?
It is a protective film sticker for interior car panels, sold for the Chery Tiggo 7 Pro 2020 2021 2022.

Key Features

• Vehicle-Specific Pre-Cut — It is cut for the Geely EX5 E5 2025-2026 left-hand drive interior, so it lines up with the original console shape.
• Full Interior Coverage — It covers the instrument cluster, central control screen, gear shift panel and window lift switches, with protection against daily scratches, fingerprint marks, dust and oil stains.
• Heat Self-Repair Coating — Its built-in thermal self-repair coating lets minor daily swirls and scratches be repaired with heat, returning the film to a smooth surface.
• Transparent TPU Film — It is made of TPU and is transparent, so the interior surface stays visible under the film.
• Wet Paste Installation — It supports wet paste installation, and no professional tools or skills are required.

Product Specifications

• Material: TPU
• Color: Transparent
• Compatible models: Geely EX5 E5 2025-2026 (left-hand Drive)
• Pack: 1 custom pre-cut

What It Is / How It Works

This interior screen protector is a TPU film cut to cover the center console of a Geely EX5 E5 2025-2026 left-hand drive car. It is a pre-cut film, so it is sized to the console rather than trimmed on the car.

Car interior screen protectors in general are thin films that sit over touch screens, gear panels and other high-contact trim. They are used to keep those surfaces looking clean and free of light scratches over time.

Who It's For / Use Cases

Car interior screen protectors suit owners who spend a lot of time in the cabin and want the center console and nearby controls kept clear of daily marks. They also suit anyone who prefers a film that can be applied without a workshop visit.

How to Use / Install / Care

1. Check that the pre-cut is the Geely EX5 E5 2025-2026 left-hand drive version before you start.
2. Hold the film against the center console so its cut edges follow the original panel contour.
3. Install it with wet paste installation, which the film supports without professional tools.
4. For minor swirls and scratches, apply heat to the film so its coating can repair them.

How to Choose

Choose a car interior screen protector by matching the vehicle make, model, year and drive side to the film. For this film, check the Compatible models row in Product Specifications before ordering, since it lists the Geely EX5 E5 2025-2026 left-hand drive fit.

Frequently Asked Questions

Which vehicle is this film cut for?
It is cut for the Geely EX5 E5 2025-2026 left-hand drive interior, as one custom pre-cut.

What is the film made of?
It is made of TPU and is transparent.

Which interior areas does it cover?
It covers the instrument cluster, central control screen, gear shift panel and window lift switches.

Can minor scratches be repaired?
Minor daily swirls and scratches can be repaired with heat, because the film has a built-in thermal self-repair coating.

Does it need professional installation tools?
It supports wet paste installation, and no professional tools or skills are required.

Does it need to be cut on the car?
No. The pre-cut matches the original interior radian and panel contour, so no on-car cutting or extra trimming is needed.

Key Features

• Flexible TPU Build — This key cover is made from TPU, a flexible material that can absorb minor bumps and scrapes.
• Full Coverage Shell — Designed as a full cover shell, it wraps around the remote key to help shield it from daily wear.

Product Specifications

• Brand Name: SZER
• Material: TPU

What It Is / How It Works

This is a TPU protective shell designed to cover a car remote key fob. It is made to fit the Chery Jetour Dashing X-1 Plus DTC for model years 2022 and 2023.

Who It's For / Use Cases

Car key covers are for owners who want to keep their key fob looking new and protect it from scratches, drops, and daily handling. They are especially useful for people who carry keys in pockets or bags with other items.

How to Use / Care

1. Slide the key fob into the cover, aligning the buttons with the openings.
2. Press the cover firmly around the edges to ensure a snug fit.

How to Choose

When choosing a key cover, consider the material for flexibility and protection, and ensure it matches your key fob model and year. A precise fit is important for easy access to buttons and ports.

Frequently Asked Questions

What material is this key cover made of?
This key cover is made of TPU, a flexible plastic that helps absorb impacts and resist scratches.

Will this cover fit my Chery Jetour Dashing key?
Check your key fob model and year to confirm compatibility.

Key Features

• Soft TPU Shell — Made from soft TPU, this key case cover offers a flexible fit around your car key fob.
• Golden Edge Design — The golden edge adds a decorative touch to the cover.
• Protective Cover — This cover helps protect your car keys and adds a decorative element.
• Accurate Button Fit — The cover is designed to match the button size and position for easy access.
• Embossed Icons — Embossed button icons provide a tactile feel and are built to last.

Product Specifications

• Brand Name: KOLEN
• Material: Soft TPU
• Color: As the picture show

What It Is / How It Works

This is a car key case cover made from soft TPU. It is designed to fit over your existing car key fob, providing a layer of protection and a decorative golden edge. The cover is intended for use with compatible KIA models, as shown in the product title.

Who It's For / Use Cases

Car key covers suit drivers who want to keep their key fob free from scratches and wear. They are also a simple way to personalize a key with a subtle color accent. If you carry your keys in a pocket or bag, a cover can help reduce scuffs from daily use.

How to Use / Care

1. Slide the cover over your car key fob, aligning the button openings with the actual buttons.
2. Press the cover gently around the edges to ensure it sits snugly on the fob.

How to Choose

When choosing a car key cover, consider the shape and button layout of your key fob. This cover is designed for specific KIA models, so check that your key matches the one in the product images.

Frequently Asked Questions

Will this cover fit my KIA key?
This cover is designed for the KIA models listed in the title, such as Rio, K2, K3, K4, K5, Sportage, Picanto, Optima, Soul, Ceed, Sorento, Forte, Stinger, and Cerato.

Does the cover come with a key?
No, the package includes only the car key cover. The key itself is not included.

What material is the cover made of?
The cover is made of soft TPU, which provides a flexible and durable fit.