Key Features

• Pre-Programmed Sensors — Each sensor comes pre-programmed for specific vehicle models, so no programming is needed before installation.
• 433MHz Wireless Signal — The 433MHz operating frequency gives a stable wireless signal between each sensor and the vehicle's monitoring system.
• Long Battery Life — The battery inside each sensor is designed to last about 3 years between sensor replacements.
• Direct Replacement Fit — The design fits the original valve stem location, which keeps installation simple.

Product Specifications

• Piece Count: 4PCS
• Operating Frequency: 433MHz
• Battery Life: About 3 years
• Part number: 13522631

What It Is / How It Works

This set of four direct-fit TPMS sensors is a tire pressure monitoring system replacement kit. TPMS sensors are the small units mounted at each wheel that report tire pressure to the vehicle's dashboard, so a dead or worn sensor can leave the warning light on until it is replaced and synced.

Who It's For / Use Cases

TPMS sensor replacements suit drivers whose tire pressure warning light stays on after the tires have been checked, or whose sensors have reached the end of their battery life. They also suit owners who want a set of matching sensors for all four wheels at once, rather than replacing one unit at a time.

How to Use / Care

1. Install the four sensors. They arrive ready to install right out of the box.
2. Activate the sensors with a TPMS scan tool or by following the vehicle's relearn procedure.
3. Plan sensor replacement around the battery life of about 3 years.

How to Choose

Start with the vehicle. Check the Vehicle Fitment row in Product Specifications against your make, model and model year before ordering. Sensors are sold as a set, so a four-piece count matches a full set for a vehicle with four wheels. Choose a set when every sensor is due for replacement, since the battery life is the same across the set.

Frequently Asked Questions

Do I need to program these sensors before installing them?
No. The sensors come pre-programmed for specific vehicle models. After installation, you perform a relearn procedure with a scan tool.

How long does the battery in these sensors last?
The battery is designed to last about 3 years under normal driving conditions.

What do I need to activate the sensors after installation?
A TPMS scan tool or relearn tool is needed to activate the sensors and sync them with the vehicle.

Can I install these sensors myself?
Installation is recommended to be performed by a trained professional. The sensors are designed as a direct replacement for the original sensors, so they fit the original valve stem location.

Will these sensors work on my 2020 Cadillac XT4?
Yes. These sensors are compatible with Cadillac XT4 models from 2020 to 2024.

This TPMS sensor operates at 433MHz and fits a range of Opel, Vauxhall, and Cadillac models. It comes pre-programmed for your specific vehicle, so no sensor programming is required before installation.

Keeping your tire pressure monitored is essential for safe driving and fuel efficiency. This sensor helps you stay aware of pressure changes, reducing the risk of blowouts and uneven tire wear. It is a direct replacement for multiple OEM part numbers, making it a versatile choice for compatible vehicles.

The sensor is designed for a simple installation process. It does not need programming, but it does require a relearn procedure using a scan tool after installation. This step syncs the sensor with your vehicle's system. Professional installation is recommended to ensure everything works correctly.

Each sensor comes with a battery life of about three years, giving you long-term reliability. The package includes the sensor itself, ready to be installed in your tire. Make sure to confirm vehicle fitment using the compatibility list or by contacting us with your VIN code before ordering.

Key Features and Benefits

- Pre-programmed for your vehicle that saves you time and effort, as no additional programming is needed.

• 433MHz operating frequency that ensures reliable communication with your car's TPMS system.

• Battery life of about 3 years that provides long-lasting performance and reduces the frequency of replacements.

• Direct replacement for OEM numbers 13522629, 13540602, 13544442, and more that makes it easy to find the right fit for your car.

• Simplified relearn process that uses a scan tool to activate the sensor and get it working quickly.

Who Is This For

- Owners of Opel Ampera-E, Antara, Karl, or Mokka models from specific production years.

• Drivers of Vauxhall Viva or Antara vehicles needing a TPMS sensor replacement.

• Cadillac CT6 or XT5 owners looking for a compatible 433MHz sensor.

• Anyone familiar with basic car maintenance who wants to replace a faulty TPMS sensor without visiting a dealership.

Usage Scenario

David noticed his tire pressure warning light flickering on his Opel Mokka. After checking the tires, he realized one sensor was failing. He ordered this set of four sensors, confirmed fitment with his VIN, and took them to his local mechanic. The mechanic installed them in under an hour and used a scan tool to relearn the sensors. Now David drives with confidence, knowing his tire pressure is monitored accurately.

Micro Comparison

Unlike some generic sensors that require complex programming or cloning, this unit arrives pre-programmed for your specific make and model. It uses a straightforward relearn process with a scan tool, which is common for many professional installations. This saves you the hassle of sending sensors back for programming or buying additional equipment.

Specifications

Operating Frequency: 433MHz

Battery Life: About 3 years

OEM Numbers: 13522629, 13540602, 13544442, 13589601, 13598773, 3617020001-M11, 3617020001-S301, 3641050-RA01, 3666200V5000, 550254709902, TP3040050

Package Includes

- 4x TPMS Sensors

Why You Will Love It

You get a direct-fit sensor that removes the guesswork from installation. No programming means less time and fewer headaches. With a three-year battery life, you can rely on consistent tire pressure monitoring for many miles ahead.

Questions and Answers

Question: Does this sensor require any programming before installation?

Answer: No, the sensor comes pre-programmed for your vehicle. You only need to perform a relearn procedure with a scan tool after installation.

Question: How do I know if this sensor fits my car?

Answer: Check the vehicle compatibility list in the description. If you are unsure, send us your VIN code and we will confirm fitment before you order.

Question: What is the battery life of this TPMS sensor?

Answer: The battery lasts about 3 years under normal use.

Question: Can I install this sensor myself?

Answer: Installation is recommended to be done by a trained professional. The sensor needs to be mounted inside the tire and then relearned with a scan tool.

Question: What does the package include?

Answer: The package includes 4 TPMS sensors. No additional tools or accessories are included.

Keep your Jeep Cherokee running safely with a direct replacement TPMS sensor. This 434MHz tire pressure sensor is designed to fit 2013-2020 Jeep Cherokee models, helping you maintain accurate tire pressure readings and avoid warning lights on your dashboard.

Proper tire pressure is essential for safe driving, fuel efficiency, and tire longevity. This replacement sensor communicates with your vehicle's onboard system to provide real-time pressure data. It comes pre-programmed for your vehicle's make and model, so installation is straightforward with the right scan tool for activation.

Built to last, each sensor includes a long-life battery rated for about three years of normal use. The durable construction handles road conditions and temperature changes without losing accuracy. Whether you are replacing a failed sensor or stocking up for future maintenance, this TPMS sensor offers a reliable solution at a practical price point.

Compatible with multiple OEM part numbers including 68249197AA, 68239720AB, and 68239720AC, this sensor simplifies the replacement process. Just install it, use a compatible scan tool to activate it, and your tire pressure monitoring system will be back to normal.

Key Features and Benefits

- Direct fit for 2013-2020 Jeep Cherokee that matches OEM specifications for reliable performance

• 434MHz frequency that communicates effectively with your vehicle's TPMS system for accurate readings

• Pre-programmed for your vehicle that eliminates the need for complex programming before installation

• Battery life of about three years that provides long-term service without frequent replacements

• Compatible with multiple OEM numbers including 68249197AA, 68239720AB, 68239720AC, 68239720AA, and 68157568AA that ensures broad vehicle fitment

• Scan tool activation that makes the setup process simple and quick

Who Is This For

- Jeep Cherokee owners from model years 2013 to 2020 who need to replace a faulty or dead TPMS sensor

• Dodge Ram owners with vehicles manufactured from July 2013 to December 2020 looking for a compatible replacement

• Ram 1500 owners with vehicles built between January 2012 and March 2018 who want a reliable TPMS sensor option

• DIY car enthusiasts who prefer to handle their own tire pressure sensor replacements at home

Usage Scenario

Mark noticed his Jeep Cherokee's tire pressure warning light staying on even after checking his tire pressures manually. A quick scan at his local auto parts store confirmed one of his TPMS sensors had failed. Instead of paying a premium for a dealer replacement, he ordered this direct-fit sensor. After installing it himself and using his scan tool to activate the new sensor, the warning light turned off and his dashboard displayed accurate pressure readings again. He saved time and money, and now drives with confidence knowing his TPMS system is working properly.

Micro Comparison

Unlike universal TPMS sensors that require programming and may not communicate correctly with your vehicle, this sensor is pre-programmed for specific Jeep, Dodge, and Ram models. It matches OEM part numbers like 68249197AA and 68239720AB, so you get a direct replacement without compatibility guesswork. The scan tool activation process is straightforward and widely supported by common automotive diagnostic tools.

Specifications

Frequency: 434MHz

Activation Type: Scan Tool

Battery Life: About 3 years

Interchange Part Numbers: 68249197AA, 68239720AB, 68239720AC, 68239720AA, 68157568AA

Package Includes

- 1 x TPMS Tire Pressure Sensor

Why You Will Love It

You get a direct replacement that matches your vehicle's original specifications without the dealer price tag. The pre-programmed design and simple scan tool activation make installation something you can handle yourself. With a battery life of about three years, you can count on reliable tire pressure monitoring for the long haul.

Questions and Answers

Question: Will this TPMS sensor fit my 2016 Jeep Cherokee?

Answer: Yes, this sensor is designed for Jeep Cherokee models from 2013 to 2020, including the 2016 model year.

Question: Do I need to program this sensor before installing it?

Answer: No, the sensor comes pre-programmed for your vehicle. You only need to activate it using a compatible scan tool after installation.

Question: How long does the battery in this sensor last?

Answer: The battery is rated for about three years of normal use.

Question: What is the frequency of this TPMS sensor?

Answer: It operates at 434MHz, which is compatible with the TPMS system in your Jeep Cherokee.

Question: Does this sensor also work on a Dodge Ram?

Answer: Yes, it is compatible with Dodge Ram models from July 2013 to December 2020 and Ram 1500 from January 2012 to March 2018.

Question: What OEM part numbers does this sensor replace?

Answer: It replaces 68249197AA, 68239720AB, 68239720AC, 68239720AA, and 68157568AA.

Key Features

• Pre-Programmed Setup — The sensors come pre-programmed for your vehicle make and model, so you only run a re-learn with a scan tool.
• 434MHz Operating Frequency — The sensors operate at 434MHz, the frequency used by many Chrysler, Jeep and RAM vehicles.
• Long-Life Battery — The battery is rated to last about 3 years under normal driving conditions.
• Four-Sensor Set — The pack contains 4 pcs, so all four sensors can be replaced at once.

Product Specifications

• Piece Count: 4 pcs
• Frequency: 434MHz
• Battery Life: About 3 years
• Part numbers: 68324960AA, 68324960AB

What It Is / How It Works

These are tire pressure monitoring system (TPMS) sensors, sold as a set of four for Jeep Cherokee and RAM trucks. The sensors work with the vehicle's onboard computer to give real-time tire pressure readings.

Who It's For / Use Cases

It suits Jeep Cherokee owners and RAM 1500, 2500 and 3500 drivers who need a replacement TPMS sensor set. Home mechanics who want pre-programmed sensors can install them with a scan tool.

How to Use / Care

1. Install the sensors with basic tools, as a DIY mechanic can.
2. Run a re-learn procedure with a scan tool to activate the sensors and sync them with your vehicle.
3. If you prefer not to do the work yourself, a tire shop can handle the installation and activation.

How to Choose

Start with the make, model and year range of your truck, since the sensors are sold for Jeep Cherokee and RAM trucks in the listed model years. Compare the part numbers 68324960AA or 68324960AB with the sensor you are replacing. Buying all four at once replaces the whole set together.

Frequently Asked Questions

Do these sensors fit my 2017 Jeep Cherokee?
Yes. It is designed for the Jeep Cherokee from 2013-09 to 2021-11, which covers 2017 models.

Do I need to program these sensors before installation?
They come pre-programmed for your vehicle make and model. You only need a re-learn procedure with a scan tool to activate them and sync them with your vehicle.

How long does the battery last?
The battery is rated to last about 3 years under normal driving conditions.

Will these sensors work on a RAM 2500 from 2016?
Yes. It is compatible with RAM 2500 and 3500 models from 2015-01 to 2018-12.

What are the OEM numbers for these sensors?
The OEM numbers are 68324960AA, 68324960AB and 68378369AE.

Replace a failing or dead tire pressure sensor in your compatible Opel, Vauxhall, or Chevrolet with this direct-fit TPMS sensor. Operating at 433MHz, this clamp-in sensor uses an auto-relearn function to simplify the activation process. It is designed to match the specifications of OEM part numbers 13581560 and 13598775, making it a reliable alternative for restoring your vehicle's tire pressure monitoring system.

Keeping your tire pressure monitoring system working is essential for safety and fuel efficiency. When a TPMS sensor stops transmitting, the warning light on your dashboard stays on, and you lose the ability to monitor tire pressure from the cabin. This sensor helps you get that system back online quickly.

The auto-relearn feature saves you time during installation. Once the sensor is installed in the tire, the vehicle's system can recognize it automatically without the need for a separate programming tool in many cases. This makes it a practical choice for DIY mechanics and professional installers alike.

Built as a clamp-in style sensor, it replaces the original unit directly. The internal battery is designed to last approximately three years under normal driving conditions, providing long-term, reliable service. It comes with a one-year replacement warranty for added peace of mind.

Key Features and Benefits

- 433MHz frequency that matches the original system requirements for reliable signal transmission

• Auto-relearn activation that simplifies the setup process and reduces installation time

• Clamp-in design that installs directly into the tire valve hole for a straightforward replacement

• Compatible with multiple Opel, Vauxhall, and Chevrolet models for versatile coverage

• One-year replacement warranty that protects your purchase against defects

Who Is This For

- Opel Astra J owners from model years 2009 to 2015 who need a direct-fit TPMS replacement

• Drivers of compatible Opel, Vauxhall, or Chevrolet vehicles with a dead or missing tire pressure sensor

• DIY car owners who prefer a sensor with auto-relearn for easier installation

• Mechanics and auto repair shops looking for a reliable, cost-effective TPMS sensor option

Usage Scenario

Martin noticed the TPMS warning light on his 2012 Opel Astra J dashboard had been on for two weeks. After checking the tire pressures and finding them all correct, he knew one of the sensors had failed. He ordered this 433MHz replacement sensor, had his local tire shop mount it in the wheel, and the auto-relearn function kicked in during the first short drive. The warning light turned off, and he could once again see the tire pressure readings on his display.

Micro Comparison

Unlike universal TPMS sensors that require programming with a separate tool before installation, this sensor is designed for specific vehicle applications and uses an auto-relearn process. This means less equipment is needed to get it working. It matches the OEM part numbers 13581560 and 13598775, so you can replace the original unit without modifying the vehicle's system.

Specifications

Activation Type: Auto-Relearn

Frequency: 433MHz

Install Method: Clamp-In

Interchange Part Numbers: 13581560, 13598775

Battery Life: Approximately 3 years

Package Includes

- 1x TPMS Sensor

Why You Will Love It

You will appreciate the straightforward installation process thanks to the auto-relearn feature. You will also enjoy the confidence that comes from having a fully functional tire pressure monitoring system, which helps you stay aware of your tire conditions on every drive. This sensor gives you a dependable replacement without unnecessary complexity.

Questions and Answers

Question: What frequency does this TPMS sensor use?

Answer: It operates at 433MHz, which is the standard frequency for many Opel, Vauxhall, and Chevrolet models.

Question: Do I need to program this sensor before installation?

Answer: The sensor uses an auto-relearn function. In many cases, the vehicle will recognize it automatically after installation without the need for a separate programming tool.

Question: What vehicles is this sensor compatible with?

Answer: It fits a range of Opel, Vauxhall, and Chevrolet models including the Opel Astra J (2009-2015), Opel Insignia A, Opel Zafira, Vauxhall Insignia, and Chevrolet Corvette C7 among others.

Question: How long does the battery in the sensor last?

Answer: The internal battery is designed to last approximately three years under normal driving conditions.

Question: Is this sensor a direct replacement for the original part?

Answer: Yes, it is a clamp-in style sensor that replaces the original unit directly. It matches OEM part numbers 13581560 and 13598775.

Question: What is the warranty on this sensor?

Answer: It comes with a one-year replacement warranty.

Key Features

• Direct-Fit Replacement — It is a direct replacement for OEM part 52933-C1100 and fits 2015-2020 Hyundai Tucson (TL) vehicles without modifications.
• 433MHz Operating Frequency — It operates at 433MHz to communicate with the vehicle's TPMS receiver.
• Snap-In Valve Stem Design — The snap-in valve stem design keeps installation quick and straightforward for most tire shops.
• Pre-Programmed Setup — It comes pre-programmed for the 2015-2020 Hyundai Tucson (TL), so no manual programming is needed before installation.
• About Three-Year Battery — The battery life of about three years reduces how often the sensor needs replacing.

Product Specifications

• Frequency: 433MHz
• Activation type: Snap-in
• Activation tool: OBDII required
• Battery life: About 3 years
• Warranty: One year (replacement)
• Package contents: 1 x TPMS Sensor
• Part number: 52933-C1100

What It Is / How It Works

This TPMS sensor is a tire pressure monitor sensor made for the 2015-2020 Hyundai Tucson (TL). It operates at 433MHz and matches OEM part number 52933-C1100, so it works as a replacement for a failed or missing original sensor.

Who It's For / Use Cases

Tire pressure monitor sensors suit vehicle owners who need to replace a dead, failing or missing sensor and want the factory monitoring system working again. For this sensor, the intended match is the 2015-2020 Hyundai Tucson (TL), so it suits owners of that model who want to avoid a dealership visit.

How to Use / Care

1. Install the snap-in sensor on the valve stem.
2. Complete the OBDII relearn with a scan tool so the system registers the sensor.
3. Drive as normal, with the sensor's battery rated at about three years.

How to Choose

Start with the vehicle. This sensor is for the 2015-2020 Hyundai Tucson (TL), so confirm your model year falls in that range. Compare OEM part number 52933-C1100 with your old sensor, then check that the 433MHz frequency and snap-in mounting match what your vehicle uses.

Frequently Asked Questions

Does this sensor need programming before installation?
No. It comes pre-programmed for the 2015-2020 Hyundai Tucson (TL), so no manual programming is required before installation. An OBDII scan tool is still needed for activation or relearn.

What frequency does it use?
It operates at 433MHz to communicate with the vehicle's TPMS receiver.

How long does the battery last?
The battery life is about three years, which reduces how often the sensor needs replacing.

Is there a warranty?
Each sensor has a one-year replacement warranty. If you have questions after receiving the item, contact the seller right away.

What comes in the package?
Each order contains one TPMS sensor.

Replace your faulty tire pressure sensor with a direct-fit, pre-programmed TPMS sensor designed for 2020 Ford and Lincoln models. This 315MHz sensor comes ready to install without manual programming, helping you maintain accurate tire pressure monitoring and safer driving.

Your vehicle's Tire Pressure Monitoring System (TPMS) is a key safety feature that alerts you when tire pressure drops too low. This replacement sensor is built to match the original equipment specifications for your Ford Escape, Explorer, or Lincoln Aviator and Corsair. It arrives pre-programmed for your specific vehicle's make, model, and year, so you can skip the complicated setup steps and focus on getting back on the road.

The sensor operates at 315MHz and monitors both internal tire pressure and temperature. After installation, you will need to activate the sensor using a compatible TPMS scan tool or by following your vehicle's relearn procedure. Many Ford and Lincoln vehicles support stationary, automatic, or OBD relearn methods, making the process straightforward for most owners.

Installation is best handled by a trained professional, as it involves dismounting the tire, removing the old sensor, and mounting the new one securely. Once installed and activated, the sensor provides real-time data to your dashboard display, giving you peace of mind on every trip.

Key Features and Benefits

- Pre-programmed for specific 2020 Ford and Lincoln models that eliminates the need for manual sensor programming

• 315MHz operating frequency that ensures compatibility with your vehicle's factory TPMS system

• Monitors tire pressure and temperature that helps prevent accidents caused by underinflated or overheated tires

• Direct replacement design that matches OEM part numbers JX7T-1A180-AA and JX7Z-1A189-C for a simple swap

• Available in single or four-pack options that lets you replace all sensors at once for consistent performance

Who Is This For

- Owners of 2020 Ford Escape, Explorer, Police Interceptor Utility, Transit 150, Transit 250, or Transit 350 vehicles

• Owners of 2020 Lincoln Aviator or Lincoln Corsair vehicles needing a direct-fit TPMS replacement

• Drivers who want a pre-programmed sensor to avoid the hassle of manual programming with a separate tool

• Anyone replacing one or all four tire pressure sensors to restore full TPMS functionality

Usage Scenario

Mark noticed the TPMS warning light glowing on his 2020 Ford Explorer's dashboard after a long highway trip. A quick check showed one tire was reading significantly lower pressure than the others. Instead of visiting the dealership and waiting days for a replacement, he ordered this pre-programmed sensor. His local tire shop installed it in under thirty minutes, and after a brief OBD relearn procedure, the warning light turned off. Mark now drives with confidence knowing his TPMS is working correctly.

Micro Comparison

Unlike universal TPMS sensors that require manual programming with a separate tool, this sensor arrives pre-configured for your 2020 Ford or Lincoln model. While some aftermarket sensors force you to buy a programming device or visit a shop for activation, this unit simplifies the process by matching your vehicle's original specifications. The result is a faster installation with fewer steps and less guesswork.

Specifications

- Part Number: JX7T-1A180-AA

• Replacement Part Numbers: JX7T-1A180-AA, JX7Z-1A189-C, TPMS60, JX7T1A180AA, JX7Z1A189C

• Operating Frequency: 315MHz

• Compatible Vehicles: 2020 Ford Escape, Ford Explorer, Ford Police Interceptor Utility, Ford Transit 150, Ford Transit 250, Ford Transit 350, Lincoln Aviator, Lincoln Corsair

Package Includes

- 1 or 4 Tire Pressure Sensors (depending on selection)

Why You Will Love It

You no longer need to worry about a sudden TPMS warning light disrupting your daily drive. This sensor is pre-programmed for your vehicle, so installation is quick and straightforward. Replacing a worn sensor restores an important safety system that helps you catch low tire pressure before it becomes a bigger problem.

Questions and Answers

Question: Does this sensor come pre-programmed for my 2020 Ford Explorer?

Answer: Yes, this sensor is pre-programmed specifically for your 2020 Ford Explorer. You will not need to program it manually.

Question: Can I install this TPMS sensor myself?

Answer: Installation requires dismounting the tire and mounting the sensor to the rim. It is recommended to have a trained professional handle the installation.

Question: What do I need to do after installing the new sensor?

Answer: After installation, you need to activate the sensor using a compatible TPMS scan tool or by following your vehicle's relearn procedure. This can be a stationary, automatic, or OBD relearn depending on your model.

Question: Will this sensor work on a 2020 Lincoln Aviator?

Answer: Yes, this sensor is compatible with the 2020 Lincoln Aviator. It matches the OEM part numbers listed for that vehicle.

Question: How do I know if this sensor fits my car?

Answer: Check your existing part number against the list provided. If your part number matches JX7T-1A180-AA, JX7Z-1A189-C, TPMS60, JX7T1A180AA, or JX7Z1A189C, this sensor will work with your vehicle. You can also verify by checking your car's VIN, model, and year.

This set of four 315MHz TPMS sensors is a direct replacement for your 2020 to 2024 Mazda 3, 6, CX-3, CX-30, CX-9, or MX-5. Each sensor comes pre-programmed for your specific vehicle, so you can skip the complex setup and get straight to installation.

Keeping your tires at the correct pressure is essential for safety and fuel efficiency. These sensors monitor the internal tire pressure and temperature, sending real-time data to your vehicle's dashboard. By alerting you to low pressure or rapid air loss, they help prevent blowouts and improve handling.

These are brand new, original equipment quality sensors designed to match the fit and function of your factory components. They use a 315MHz operating frequency and are built to withstand harsh road conditions.

Installation requires a "re-learn" procedure using a compatible scan tool or by driving the vehicle, depending on your Mazda model. The process is straightforward, but professional installation is recommended.

Key Features and Benefits

- Pre-programmed for your specific Mazda model and year that saves time and eliminates the need for complex sensor programming.

• 315MHz operating frequency that ensures reliable communication with your vehicle's onboard TPMS system.

• Monitors both tire pressure and temperature that provides a complete picture of your tire health and helps prevent dangerous failures.

• Direct OEM replacement design that fits perfectly into your existing wheels without modifications.

• Compatible with multiple relearn methods (Stationary, Automatic, OBD) that offers flexibility depending on your vehicle's system.

Who Is This For

- Mazda owners needing to replace failed or worn-out factory TPMS sensors.

• Drivers who have recently purchased new tires and want to install fresh sensors at the same time.

• Car enthusiasts performing routine maintenance to keep their vehicle's safety systems fully operational.

• Anyone looking for a cost-effective alternative to dealership-priced sensor replacements.

Usage Scenario

Mark noticed his 2021 Mazda CX-5's tire pressure warning light flickering on and off. After a tire shop confirmed one of his original sensors was failing, he ordered this 4-pack. He had his local mechanic install them during a routine tire rotation. After a quick OBD relearn, the warning light was gone, and he now has peace of mind knowing all four tires are being accurately monitored.

Micro Comparison

While some universal TPMS sensors require programming with a separate tool, these sensors come pre-programmed for your specific Mazda model. This reduces the installation steps and lowers the chance of setup errors. They are a direct match for your vehicle's original sensors, ensuring consistent performance without the guesswork.

Specifications

Part Number: BDGF-37140

Replacement Part Numbers: BDGF-3714, BDGF-37-140

Operating Frequency: 315MHz

Material: BDGF-37140 TPMS Sensor

Package Includes

- 4 x Tire Pressure Sensors

Why You Will Love It

You get a complete set of four sensors that are ready to install on your Mazda. The pre-programmed design saves you time and money compared to dealership options. It is a simple upgrade that restores a critical safety feature and keeps your driving experience worry-free.

Questions and Answers

Question: Do these sensors need to be programmed before installation?

Answer: No, they come pre-programmed for your specific vehicle make, model, and year. You just need to activate them using a "re-learn" procedure.

Question: What is the operating frequency of these sensors?

Answer: They operate at 315MHz.

Question: Will these sensors work on my 2022 Mazda CX-30?

Answer: Yes, they are designed to fit 2020-2024 Mazda 3, 6, CX-3, CX-30, CX-9, and MX-5 models.

Question: What is a "re-learn" procedure and do I need a special tool for it?

Answer: A re-learn procedure tells your car to recognize the new sensors. It can be done through a stationary method, automatic driving, or via an OBD tool. A compatible scan tool is often required.

Question: Can I install these sensors myself?

Answer: Installation is recommended to be performed by a trained professional as it involves dismounting and remounting tires.

Keep your BMW 3-Series G20 running safely with a direct replacement tire pressure monitoring sensor. This 433MHz TPMS sensor is designed for 2019 to 2025 models and uses the original equipment part numbers 6877937 and 6877936 for a precise fit. It delivers accurate tire pressure readings to your dashboard, helping you maintain proper inflation and avoid uneven tire wear.

This sensor arrives pre-programmed for your specific BMW make, model, and year, so there is no complex programming needed before installation. You will only need to activate the sensor using a TPMS scan tool or perform a vehicle relearn procedure, which typically requires an OBDII tool. The straightforward setup saves you time and gets your TPMS system working again quickly.

Built with a durable PCBA board and battery, this sensor is designed to withstand the demands of daily driving. It directly replaces your worn or faulty factory sensor, restoring the tire pressure monitoring function and giving you one less thing to worry about on the road. Installation is best handled by a trained professional to ensure a secure seal and proper function.

This sensor is also compatible with a wide range of other BMW models and several Mercedes-Benz, Alpina, and Rolls-Royce vehicles. Always verify your vehicle's original equipment part number before ordering to ensure a perfect match.

Key Features and Benefits

- Direct replacement design that fits BMW 3-Series G20 2019-2025 and many other models, so you get a simple swap without modifications.

• Pre-programmed for your vehicle's make and model, which eliminates the need for complex sensor programming before installation.

• 433MHz frequency that communicates accurately with your car's TPMS system, giving you reliable tire pressure data on your dashboard.

• Uses OEM part numbers 6877937 and 6877936, ensuring a precise match to your factory sensor specifications.

• Built with a PCBA board and battery for long-lasting performance, helping you avoid frequent sensor replacements.

Who Is This For

- BMW 3-Series G20 owners from 2019 to 2025 who need to replace a faulty or dead TPMS sensor.

• Drivers who want a pre-programmed sensor that is ready to install without additional programming steps.

• Car enthusiasts or DIY owners who prefer to have a spare TPMS sensor on hand for quick replacement.

• Workshop technicians looking for a reliable aftermarket sensor that matches original equipment specifications.

Usage Scenario

David noticed his 2021 BMW 330i dashboard showing a low tire pressure warning light even after inflating all tires. A quick scan with his OBDII tool revealed the left rear TPMS sensor had stopped communicating. He ordered this replacement sensor, installed it at his local garage, and performed the relearn procedure. The warning light disappeared, and he now sees accurate pressure readings for all four tires every time he drives.

Micro Comparison

Unlike generic universal TPMS sensors that require cloning or complex programming, this sensor comes pre-programmed for your specific BMW model. It directly replaces the factory sensor using the same part numbers, so you avoid compatibility issues. The simple activation process using a scan tool or OBDII relearn makes it a practical choice for both professional installers and experienced DIY owners.

Specifications

Material: PCBA board and battery

Model Number: 6877937, 6877936

OEM Part Numbers: 6877937, 6877936, 36106877937, 36106872803, 36106872774, 36106876955, 36106876957, 36106887147, 42607-WAA02, 6877936-04, 6876955-02, 6887140-01, 6887140-03, 6887147-01, A0009052102, A0009052102Q02, A0009052102Q04, A0009052102Q06, A0009052102Q07, A0009052102Q08, A0009053907, A0009054104, A0009057105, A0009057205

Frequency: 433MHz

Package Includes

- 1 or 4 TPMS sensors (depending on selected option)

Why You Will Love It

You will appreciate the peace of mind that comes from knowing your tire pressure is always monitored accurately. This sensor restores a critical safety feature without the hassle of complex programming. It is a straightforward, reliable fix that keeps your BMW driving as it should.

Questions and Answers

Question: Does this sensor come pre-programmed for my BMW?

Answer: Yes, the sensor is pre-programmed for your specific vehicle make, model, and year. You only need to activate it using a TPMS scan tool or perform a vehicle relearn procedure.

Question: What is the difference between the 1-pack and 4-pack options?

Answer: The 1-pack includes a single sensor for replacing one faulty unit. The 4-pack includes four sensors, which is ideal if you are replacing all sensors at once.

Question: Do I need any special tools to install this sensor?

Answer: Installation requires standard tire mounting tools. After installation, you will need an OBDII tool or a TPMS scan tool to perform the relearn procedure so your car recognizes the new sensor.

Question: Will this sensor work on my 2022 BMW X5?

Answer: This sensor is compatible with several BMW X5 models from 2018 onward. Please check your original equipment part number against the list of OEM numbers provided to confirm compatibility before ordering.

Question: Can I install this sensor myself?

Answer: While it is possible for experienced DIY owners, installation is recommended to be performed by a trained professional to ensure a proper seal and correct function.

Key Features

• Direct BMW Fit — It is designed for the BMW 7-Series G11 from 2015 to 2022 and integrates with the car's TPMS system.
• 433MHz Wireless Signal — It transmits tire pressure readings on 433MHz to the car's onboard computer.
• Pre-Programmed Sensor — It comes pre-programmed for the vehicle, so no manual programming is needed before installation.
• PCBA Board and Battery — The sensor is built around a PCBA board and battery.

Product Specifications

• Piece Count: 1 or 4 pieces (select at checkout)
• Material: PCBA board and battery
• Frequency: 433MHz
• OEM Numbers: 6887140, 6887147

What It Is / How It Works

This TPMS sensor is a replacement tire pressure monitoring sensor for the BMW 7-Series G11 from 2015 to 2022. It sends tire pressure readings wirelessly on 433MHz to the car's onboard computer, so the dashboard display can show tire pressure. Tire pressure monitoring sensors sit inside the wheel and report pressure to the vehicle's system.

Who It's For / Use Cases

Owners of a BMW 7-Series G11 from 2015 to 2022 who need to replace a faulty or dead tire pressure sensor are the main buyers for this part. Drivers who want the tire pressure warning to work correctly again after a sensor failure, and workshop technicians who service these vehicles, also fit this profile.

How to Use / Care

1. Have the sensor installed by a mechanic or trained professional who has the tools needed to handle TPMS sensors.
2. Confirm the sensor is pre-programmed for your vehicle, so no programming is needed before installation.
3. After installation, activate the sensor with a TPMS scan tool or follow the relearn procedure with an OBDII scanner.

How to Choose

Choose the 1-piece option when only one tire sensor needs replacing. Choose the 4-piece option when you want a full set for all four tires. Before ordering, compare the OEM number on your existing sensor with 6887140 and 6887147, which this sensor matches.

Frequently Asked Questions

Will this sensor work on a 2018 BMW 7-Series G11?
It is designed for the BMW 7-Series G11 from 2015 to 2022, including the 2018 model year.

Do I need to program this sensor before installing it?
No, the sensor comes pre-programmed for your vehicle. After fitting, activate it with a TPMS scan tool or follow the relearn procedure with an OBDII scanner.

What is the difference between the 1-piece and 4-piece option?
The 1-piece option replaces a single faulty sensor, while the 4-piece option includes a full set for all four tires.

How do I know if this sensor is compatible with my car?
Compare the OEM part number on your existing sensor with 6887140 and 6887147, which this sensor matches. It is designed for the BMW 7-Series G11 from 2015 to 2022.

Can I install this sensor myself?
Installation is recommended to be performed by a trained professional who has the proper tools and equipment to handle TPMS sensors.

Key Features

• Pre-Programmed Sensor — Comes pre-programmed for your specific vehicle, which removes the need for sensor programming after you install it.
• Direct Replacement Fit — Designed to fit the valve stem hole of your factory rim as a direct replacement for the original part, without modifications.
• 433MHz Frequency — Operates at 433MHz to work with the factory TPMS system in many compatible vehicles.
• Plastics and Metals Build — Made from plastics and metals for durability.
• Pressure and Temperature Monitoring — Monitors tire pressure and temperature to help you stay aware of your tire condition.

Product Specifications

• Material: Plastics and metals
• Operating Frequency: 433MHz
• Fitment Type: Direct Replacement
• Quantity: 1 or 4 pieces (depending on selection)

What It Is / How It Works

This TPMS sensor is a tire pressure monitoring sensor sold as a direct replacement part. It is designed to fit the valve stem hole of the factory rim and works in place of the original part. Tire pressure monitoring sensors are mounted inside the tire and report pressure and temperature, which is the job this replacement covers.

Who It's For / Use Cases

Drivers who need a replacement tire pressure sensor for a Dodge Challenger (2010-2021), Charger (2011-2014), Durango (2010-2016), or Grand Caravan (2011-2021) are the main match for this part. Owners of Chrysler 300, Town & Country, Jeep Wrangler, Ram 1500, Fiat 500L, and Volkswagen Routan models should check their vehicle year against the fitment check described below.

How to Use / Care

1. Start with a sensor that is already pre-programmed for your specific vehicle, so you do not need to write new sensor IDs.
2. Have a trained professional or local tire shop mount the sensor in the tire during a tire change.
3. If your vehicle needs it, complete the relearn procedure, which may be stationary, automatic while driving, or OBD depending on your car model.
4. Skip sensor ID writing and cloning, since this sensor does not require them.

How to Choose

Choose by vehicle first. Match your make, model, and year against the fitment list, and confirm your existing part number is among the replacement part numbers before ordering. Confirm that 433MHz matches the factory TPMS system on your vehicle.

Frequently Asked Questions

Does this sensor come programmed for my car?
Yes, the sensor is pre-programmed for your specific make, model, and year, so no sensor programming is required.

Do I need a special tool to activate the sensor after installation?
The sensor is pre-programmed but still needs activation through your vehicle's relearn procedure after installation. That relearn may be stationary, automatic while driving, or OBD, depending on your car model.

What is the operating frequency of this sensor?
The sensor operates at 433MHz, which matches the factory TPMS system in many compatible vehicles.

How do I know if this sensor fits my vehicle?
Check your vehicle VIN code, model, and year against the fitment list. Confirm that your existing part number matches one of the replacement part numbers before ordering.

Is installation difficult?
Installation is described as straightforward for a trained professional, and having a professional mount the sensor in the tire is recommended.

Key Features

• Anti-Burning Plastic — The sensor is anti-burning and produced from environmental plastic material.
• ABS and Metal Build — It is made of ABS plastic and metal.
• It Uses Cr2032 — It uses a CR2032, CR2050 or CR2450 battery, rated for a lifespan of ≥ 2-5 years.

Product Specifications

• Frequency: 433MHZ
• Storage and operating temperature: -40°C～+125°C
• Battery model: CR2032/CR2050/CR2450; Ford Escape Ranger KA+ F-150 Ecosport Kuga Transit Connect Fiesta B-MAX Grand C-MAX 1862980
• Battery lifespan: ≥ 2-5 years
• Material: ABS plastic and metal
• Warranty: 24 Months
• Packing: Bubble bag+Inner Box+ Outer Cartons
• Fits (examples): Ford Escape 2014-2019; Ford Ranger 2014-2020; Ford Kuga 2012-2019; Ford F-150 2008-2014
• Part numbers: EV6T-1A180-DC, 1862980

What It Is / How It Works

It is a TPMS tire pressure sensor for Ford vehicles. It fits the Ford Escape 2014-2019, Ranger 2014-2020, Kuga 2012-2019 and F-150 2008-2014. It is listed for models including the Escape, Ranger, F-150 and Kuga, and it is sold as a replacement sensor for the tire pressure monitoring system.

Who It's For / Use Cases

Tire pressure sensors suit drivers who need to replace a worn or faulty sensor on a listed vehicle model. They suit owners who want a sensor that matches the vehicle's model and year before fitting, and anyone who prefers a replacement that lists its battery type, frequency and operating temperature range.

How to Use / Care

1. Use it to monitor tire pressure on a vehicle model listed in Product Specifications.

How to Choose

Pick the pack option that covers how many sensors your vehicle needs.

Match the model and year in the Fits row of Product Specifications to your vehicle before ordering.

The part number is listed in Product Specifications, so compare it with your original sensor's part number.

Frequently Asked Questions

Which vehicles does this sensor fit?
It fits the Ford Escape 2014-2019, Ford Ranger 2014-2020, Ford Kuga 2012-2019 and Ford F-150 2008-2014.

What battery does it use?
It uses CR2032, CR2050 or CR2450 batteries, and the battery lifespan is ≥ 2-5 years.

What frequency does it operate on?
It operates at 433MHZ, and its storage and operating temperature range is -40°C～+125°C.

What is it made of?
It is made of ABS plastic and metal.

How do I confirm the sensor fits my vehicle?
Compare the part number listed in Product Specifications, EV6T-1A180-DC, with your original part number, since that is the only way to be sure the part will fit your vehicle.

Keep your tire pressure monitored accurately with this direct replacement TPMS sensor, designed for the Nissan Micra and select Nissan and Infiniti models from 2018 to 2024. Operating at 433MHz, this sensor helps you maintain proper tire inflation for safer driving and better fuel economy.

This sensor replaces OEM part numbers 40700-4CB0B and 40700-4CB0A, making it a simple swap for your original equipment. It comes pre-programmed for your specific vehicle make, model, and year, so you only need to activate it using a scan tool or perform a re-learn procedure after installation.

The clamp-in design ensures a secure fit inside your tire, while the battery is rated to last about three years under normal driving conditions. If you have any issues after receiving the product, contact us right away for support.

Key Features and Benefits

- 433MHz operating frequency that matches your vehicle's TPMS system for reliable communication

• Pre-programmed for your specific make, model, and year to simplify installation

• Clamp-in design that provides a secure and stable fit inside the tire

• Battery life of about 3 years for long-lasting performance

• Direct replacement for OEM part numbers 40700-4CB0B and 40700-4CB0A

Who Is This For

- Nissan Micra owners with model years 2017 to 2023 needing a TPMS replacement

• Nissan Altima drivers with vehicles from 2018 to 2024 requiring a new tire pressure sensor

• Infiniti QX50 owners with models from 2018 to 2024 looking for a direct-fit TPMS sensor

• DIY car owners who want to replace a faulty TPMS sensor without visiting a dealership

Usage Scenario

Alex noticed the tire pressure warning light on his 2020 Nissan Micra stayed on even after inflating the tires. A quick check at the local shop confirmed one of the TPMS sensors had failed. Instead of paying for an expensive dealer replacement, Alex ordered this pre-programmed sensor, had it installed at a nearby tire shop, and performed a simple OBD re-learn procedure. The warning light turned off, and Alex now drives with confidence knowing his tire pressure is monitored accurately.

Micro Comparison

Compared to generic universal TPMS sensors that require complex programming and may not work reliably, this sensor is pre-programmed for your specific Nissan or Infiniti model. It uses the correct 433MHz frequency and matches the OEM design, so you get a straightforward replacement without compatibility issues or extra setup steps.

Specifications

Material: CLAMP-IN

Model Number: 40700-4CB0B, 407004CB0B, 40700-4CB0A

OEM Number: 40700-4CB0B

Frequency: 433MHz

Battery Life: About 3 years

Package Includes

- 1 x TPMS Sensor

Why You Will Love It

You will love the peace of mind that comes with accurate tire pressure monitoring, helping you avoid uneven tire wear and improve fuel efficiency. This sensor is a direct replacement that saves you time and money compared to dealer parts. It is designed to work seamlessly with your vehicle's existing TPMS system.

Questions and Answers

Question: Does this TPMS sensor come pre-programmed?

Answer: Yes, it is pre-programmed for your specific vehicle make, model, and year. You will need to activate it with a scan tool or perform a re-learn procedure after installation.

Question: What frequency does this sensor use?

Answer: It operates at 433MHz.

Question: How long does the battery last?

Answer: The battery is rated to last about 3 years under normal driving conditions.

Question: What is the re-learn procedure for this sensor?

Answer: The recommended re-learn method is OBD re-learn, which can be done with a compatible scan tool or at a tire shop.

Question: Will this sensor fit my 2019 Nissan Altima?

Answer: Yes, it fits Nissan Altima models from 2018-11 to 2024-10, as well as Nissan Micra and Infiniti QX50 within the listed date ranges.

Key Features

• Clamp-In Mounting — Each sensor clamps onto the tire valve stem with a metal nut for a secure, leak-free fit.
• 433MHz Signal — It operates at 433MHz and communicates with the vehicle's TPMS receiver to send pressure alerts.
• Three-Year Battery — The internal battery is rated for about three years of typical use, so sensors need fewer replacements.
• Four-Sensor Set — The set contains four sensors, enough to equip an entire vehicle.
• Direct Replacement Fit — It is a direct replacement for OEM part numbers 40700-4CB0A, 40700-4CB1B, and 40700-4CB1A.

Product Specifications

• Piece Count: 4Pcs
• Manufacturer Part Number: 40700-4CB1B, 40700-4CB0A, 40700-4CB1A
• Interchange Part Number: 407004CB1B, 407004CB0A, 407004CB1A
• Operating Frequency: 433MHz
• Battery Life: About 3 Years
• Mounting Type: Clamp-In

What It Is / How It Works

This is a tire pressure monitoring sensor, a clamp-in unit that mounts on the tire valve stem and sends pressure readings to the vehicle's monitoring system. The set holds four sensors and arrives pre-programmed to sync with the vehicle's onboard system.

Who It's For / Use Cases

Tire pressure monitoring sensors suit drivers replacing a dead or failing original sensor. The listed buyers include owners of Renault models such as Espace, Kadjar, Kangoo, Koleos, Megane, Scenic, and Talisman, and owners of Nissan models such as Qashqai, X-Trail, Leaf, Micra, and NV200. DIY car owners who want a direct-fit replacement fit this group as well.

How to Use / Care

1. Fit clamp-in sensors onto the tire valve stem, where a metal nut secures each sensor.
2. Have a tire shop or mechanic mount the sensors inside the tire, since mounting requires tire dismounting and mounting equipment.
3. Plan sensor replacement around the battery rating of about three years of typical use.
4. Compare snap-in sensors, which use a rubber grommet and are pushed into place, with this clamp-in set before ordering.

How to Choose

Start with the mounting type. Clamp-in sensors use a metal nut on the valve stem, while snap-in sensors use a rubber grommet, so match the type your wheels use. Next, match the part number on your original sensor against the manufacturer and interchange numbers in Product Specifications. The operating frequency is 433MHz, and the set holds four sensors, so one set covers all four wheels.

Frequently Asked Questions

Can I install these sensors myself?
The sensors mount inside the tire on the valve stem. Tire dismounting and mounting equipment is needed, so a tire shop or mechanic is recommended for installation.

Do I need a special tool to program these sensors?
They are designed as a direct replacement for the OEM part numbers and should work with the vehicle's existing TPMS system without a separate programming tool.

How long does the battery last?
The battery is rated at about 3 years under normal driving conditions.

What is the difference between clamp-in and snap-in sensors?
Clamp-in sensors, like this set, use a metal nut to secure the sensor to the valve stem for a very stable, leak-resistant fit. Snap-in sensors use a rubber grommet and are pushed into place.

Will these sensors work on my 2018 Renault Koleos?
This set covers the Renault Koleos from 2016-08 to 2022-03. Match your original part number against 40700-4CB0A, 40700-4CB1B, or 40700-4CB1A in Product Specifications before you order.

Keep your tires at the right pressure with a direct replacement TPMS sensor designed for a wide range of Toyota and Lexus vehicles. This 433MHz sensor uses durable materials for a long service life and helps you maintain safe driving conditions.

The ANWAYTECH TPMS sensor is built with high-strength plastic and metal components. It has been professionally tested to ensure trouble-free installation and reliable performance. Each sensor comes pre-programmed for your specific vehicle's make and model, so no sensor programming is required. You just need to activate them with a compatible scan tool.

Designed to fit on the left, right, front, or rear wheel positions, these sensors are easy to install. They replace a wide range of original equipment part numbers, including 4260748020, 42607F4020, and PMV-C215. This direct fit design reduces installation time and gets you back on the road quickly.

Choosing a quality TPMS sensor is a simple way to enhance your vehicle's safety. By monitoring tire pressure, these sensors help prevent uneven tire wear and improve fuel efficiency, giving you more control and peace of mind on every drive.

Key Features and Benefits

- High strength materials for a long service life that provides reliable performance without trouble.

• Professionally tested to ensure trouble-free installation and performance, enhancing the safety of your vehicle.

• No sensor programming required as it comes pre-programmed for your specific vehicle, just activate with a scan tool.

• Fits placement on left, right, front, or rear wheels for easy and versatile installation.

• Compatible with a wide range of Toyota and Lexus models for a direct replacement fit.

Who Is This For

- Toyota owners driving models like the Corolla, RAV4, C-HR, Camry, Highlander, Land Cruiser, and Prius.

• Lexus owners with models such as the ES, RX, NX, UX, GX, LC, LS, LX, and LM series.

• Drivers who need a direct replacement TPMS sensor that is pre-programmed and ready to install.

• Anyone looking to replace a faulty or dead TPMS sensor with part numbers like 4260748020 or PMV-C215.

Usage Scenario

Mark noticed his Toyota RAV4's tire pressure warning light was on after a cold morning. Instead of guessing which tire was low, he ordered a set of four ANWAYTECH TPMS sensors. He took his car to a local shop where the technician easily installed them on all four wheels. After a quick activation with a scan tool, the warning light turned off, and Mark felt confident driving his family on their weekend road trip knowing his tire pressure was being monitored correctly.

Micro Comparison

Unlike universal TPMS sensors that require complex programming and may not fit correctly, this ANWAYTECH sensor is designed as a direct replacement for specific Toyota and Lexus models. It comes pre-programmed for your vehicle, saving you time and the hassle of figuring out complicated setup procedures. The high-strength materials and professional testing provide a reliable alternative to worn-out original sensors.

Specifications

Material: Plastic, Metal

Model Number: 42607F4020, 4260706070, 4260702090, 42607F4020

OEM Number: 4260748020, PMV-C215, 4260702070, 4260760010, 4260707010, 4260726010

Frequency: 433MHz

Package Includes

- 1 or 4 PCS TPMS Sensors (depending on selection)

Why You Will Love It

You will appreciate the straightforward installation and the peace of mind that comes from knowing your tire pressure is monitored accurately. This sensor is a practical, direct-fit solution that helps you avoid the guesswork of low tire pressure. It is a simple upgrade that supports safer, more efficient driving every day.

Questions and Answers

Question: Does this TPMS sensor work with my 2020 Toyota RAV4?

Answer: Yes, this sensor is compatible with the Toyota RAV4 (XA50) from 2018 to 2024.

Question: Do I need to program this sensor before installation?

Answer: No, the sensor comes pre-programmed for your specific vehicle. You only need to activate it with a compatible scan tool.

Question: What is the frequency of this sensor?

Answer: It operates at 433MHz.

Question: Can I install this sensor myself?

Answer: Installation requires removing the tire from the wheel. It is recommended to have a professional tire shop install and activate the sensor.

Question: What is the difference between buying 1 piece and 4 pieces?

Answer: Buying 4 pieces gives you a complete set for all four wheels, ensuring all sensors are replaced at the same time. Buying 1 piece is for replacing a single faulty sensor.

Question: Will this sensor fit a Lexus ES 350?

Answer: Yes, it is compatible with the Lexus ES Series from 2018 to 2024.

Protect your vehicle with direct tire pressure monitoring. These 4 TPMS sensors, part number 13506028, are a direct replacement for a wide range of Opel models, including the Adam, Astra, and Corsa. They come pre-programmed for your specific vehicle, requiring no complex setup, and operate at a standard 433MHz frequency.

These sensors are designed to provide accurate and reliable tire pressure readings. By constantly monitoring the internal pressure and temperature of your tires, they help you catch slow leaks and pressure drops before they become a safety issue. This data helps you maintain proper tire inflation, which can improve fuel efficiency and extend the life of your tires.

The installation process is straightforward for a professional. These sensors are a direct 1:1 replacement for your old units. After installation, your vehicle will need a sensor activation procedure, which can often be done with a scan tool or by following your car's specific relearn process. Enjoy greater peace of mind on every drive with a system that keeps you informed.

Key Features and Benefits

- Pre-programmed sensors that require no manual programming for your specific Opel model, saving you time and effort.

• Direct replacement design that fits perfectly into your existing tire valve system, ensuring a secure and reliable seal.

• 433MHz operating frequency that is compatible with standard TPMS receivers in your vehicle, guaranteeing accurate signal transmission.

• Monitors tire pressure and temperature to help you spot potential tire issues early, preventing blowouts and improving road safety.

• Brand new and high-quality construction that provides long-lasting performance and dependable service.

Who Is This For

- Opel owners with a vehicle listed in the fitment guide who need to replace a faulty or missing tire pressure sensor.

• Car enthusiasts performing a complete wheel or tire change who want to ensure their TPMS system remains fully operational.

• Drivers who value safety and want to maintain the original functionality of their vehicle's tire pressure monitoring system.

• Mechanics and auto shops looking for a reliable, pre-programmed sensor solution for their Opel customers.

Usage Scenario

David noticed the tire pressure warning light on his Opel Insignia's dashboard was staying on. After checking the tires with a gauge, he found they were fine, indicating a faulty sensor. He ordered this 4-pack of sensors and took his car to a local tire shop. They installed the new sensors and used a scan tool to activate them. The warning light turned off, and David now sees accurate pressure readings on his dashboard again, giving him confidence for his daily commute.

Micro Comparison

Unlike universal sensors that require complex programming and may not work with all vehicles, these sensors are pre-programmed for a wide range of Opel models. This direct-fit approach eliminates the risk of compatibility issues and simplifies the installation process. Choosing these specific replacement sensors ensures you get a part that is designed to work seamlessly with your vehicle's existing TPMS system.

Specifications

- Condition: Brand New & High Quality

• Manufacture Part Number: 13506028

• Replacement Part Numbers: 13516165, 13598773, 13540602, 13540603, 13506028, 13589601

• Operating Frequency: 433MHz

• Fitment Type: Direct Replacement

• Color: As the pictures show

Package Includes

- 4 x Tire Pressure Sensor

Why You Will Love It

You will love the simple, direct fit that gets your TPMS system working again without the headache of programming. Knowing your tire pressure is being monitored accurately provides a sense of security and control. It is a small upgrade that makes a big difference in everyday driving safety.

Questions and Answers

Question: Do I need to program these sensors myself?

Answer: No, these sensors come pre-programmed for your specific Opel model. You will only need to activate them using a scan tool or a vehicle relearn procedure after installation.

Question: What Opel models are these sensors compatible with?

Answer: They are compatible with many models including the Opel Adam, Ampera, Antara, Astra J and K, Corsa D and E, Insignia, Meriva B, Mokka, and Zafira C, from 2006 to 2017.

Question: What is the operating frequency of these sensors?

Answer: These sensors operate at a standard frequency of 433MHz.

Question: Can I install these sensors myself?

Answer: Installation requires removing the tire from the rim. It is recommended to have a trained professional perform the installation.

Question: Will these sensors work with my vehicle's existing TPMS system?

Answer: Yes, they are a direct replacement and are designed to work with your vehicle's standard TPMS receiver. After installation, they must be activated.

Key Features

• Pre-Programmed Sensors — They come pre-configured for specific Ford models, so you do not need to program them before installation.
• 433MHz Wireless Link — They communicate wirelessly with the vehicle's TPMS system at 433MHz.
• Four-Sensor Set — The set includes four sensors, so all four tires can be replaced at once.
• Pressure and Temperature — They monitor internal tire pressure and temperature.

Product Specifications

• Piece Count: 4pcs
• Operating Frequency: 433MHz
• Fitment Type: Direct Replacement
• Manufacture Part Number: EV6T-1A180-CB, EV6T-1A150-CB
• Replacement Part Number: EV6T-1A180-CB, EV6T-1A150-CB, EV6T-1A150-DB, EV6T-1A180-CC, 2036832, EV6T-1A180-DB, 2318530, 1862980
• Compatible models: Ford Fiesta Van Focus III F-Series F-150 Kuga

What It Is / How It Works

These are tire pressure monitoring system (TPMS) sensors, sold as a set of four for Ford vehicles. Tire pressure monitoring sensors are fitted to each wheel and send readings to the vehicle's TPMS system.

Who It's For / Use Cases

Ford owners who need to replace faulty or worn-out TPMS sensors will find this set suited to the job. Drivers who want a direct replacement that matches the original sensor fit this type of set.

How to Use / Care

1. Have a trained professional install the sensors and use the correct activation tool for your vehicle's relearn procedure.
2. Check your owner's manual for the relearn procedure your vehicle needs after new sensors are installed.
3. Complete the relearn using a stationary relearn, an automatic relearn while driving, or an OBD relearn, as your vehicle requires.

How to Choose

Start by comparing your original sensor's part number with the Replacement Part Number row in Product Specifications. Choose a four-piece set when all tires need replacing at the same time, because the set includes four sensors.

Frequently Asked Questions

Do these sensors need programming before installation?
No, they come pre-programmed for your specific Ford model. You only need to activate them using the correct scan tool or relearn procedure.

Do these sensors work with a Ford F-150 from 2015?
These sensors are compatible with Ford F-150 models from 2014 to 2021, so a 2015 model falls within that range.

What is a relearn procedure?
A relearn procedure is the process your vehicle uses to recognize the new sensors. It can be done through stationary relearn, automatic relearn while driving, or OBD relearn using a scan tool.

Can I install these sensors myself?
Installation is recommended to be performed by trained professionals to ensure proper mounting and function.

What frequency do these sensors use?
They operate at 433MHz and are a direct replacement for the original equipment sensor.

Key Features

• Pre-Programmed Sensors — They come pre-programmed for specific makes and models, so you can install them without complex sensor programming.
• 433MHz Operating Frequency — Each sensor operates at 433MHz to communicate with your vehicle's TPMS system.
• Long Battery Life — Each sensor provides about 3 to 5 years of battery life before replacement is needed.
• Tire Pressure and Temperature — The sensors monitor tire pressure and temperature.
• Direct Replacement Design — It is designed as a direct replacement for the original sensors on the listed vehicles.

Product Specifications

• Operating Frequency: 433MHz
• Battery Life: About 3 to 5 years
• Fitment Type: Direct Replacement
• Package Contents: 4 x Tire Pressure Sensor
• Part number: 407009322R

What It Is / How It Works

These are TPMS sensors, the tire pressure monitoring sensors that fit inside each wheel. The set includes four sensors, giving you a complete replacement for all wheels, and each one is a direct replacement part.

Who It's For / Use Cases

It is for owners of Renault Clio IV (2012-2018), Captur (2013-2016), Kangoo II (2007-2021), Lodgy (2012-2022) or Logan (2010-2021) models, and for drivers with a Dacia Oroch Pickup (2016-2022) or Smart Fortwo (2014-2023) who want a direct replacement TPMS sensor set.

How to Use / Care

1. Install the sensors on the vehicle. They come pre-programmed for specific makes and models, so you can install them without complex sensor programming.
2. After installation, activate the sensors with the correct scan tool or a vehicle re-learn procedure.

How to Choose

Choose a sensor set that matches your vehicle's make, model and model year, since these sensors are supplied for specific vehicles. Check the operating frequency and fitment type in the specifications before ordering. When replacing sensors, a complete set for every wheel keeps the set consistent.

Frequently Asked Questions

Do I need to program these sensors myself?
No. They come pre-programmed for your specific vehicle make, model and year. After installation, you activate them with a compatible scan tool or a re-learn procedure.

How long does the battery last?
The battery life is about 3 to 5 years, depending on driving conditions and usage.

What operating frequency do they use?
They operate at 433MHz, a common frequency for many vehicle TPMS systems.

Do I need special tools for installation?
Installation is recommended for trained professionals. You will need a tire changer, plus a scan tool or your vehicle's re-learn procedure to activate the sensors.

Are these direct replacement sensors?
They are direct replacement sensors, designed to take the place of the original sensors on the listed vehicles. The set includes four sensors.

Key Features

• 433MHz Operation — The sensors operate at 433MHz, the same frequency as the factory sensors they replace.
• Clamp-In Design — The clamp-in design holds each sensor inside the tire for a secure, stable fit.
• Pre-Programmed Setup — Each sensor is pre-programmed for specific makes and models, which simplifies setup.

Product Specifications

• Piece Count: 4 pcs
• Frequency: 433MHz
• Interchange part numbers: 7PP907275F, 4D0907275B
• Battery life: About 3 years

What It Is / How It Works

These tire pressure monitor sensors are sold as a set of 4 pcs, one for each wheel. A tire pressure monitor sensor sits inside the tire and reports tire pressure so the vehicle's dashboard system can show a warning when pressure drops.

Who It's For / Use Cases

Tire pressure monitor sensors suit drivers who are replacing factory TPMS units and want a sensor that matches the original frequency and mounting design. They also suit owners who want all four wheels serviced at the same time.

How to Use / Care

1. Fit each sensor as a direct replacement for a factory TPMS unit, since the design matches the original clamp-in mounting.
2. Have a scan tool or a re-learning procedure ready, because the sensors need activation after installation.
3. Compare the part numbers listed in Product Specifications with the sensor you are replacing before fitting.
4. Keep the four sensors together as one set so every wheel is replaced at the same time.

How to Choose

Start with the frequency and mounting design of the factory TPMS units on your vehicle, and match them to this set. Count matters too: a set of 4 pcs covers all four wheels, which keeps replacements consistent across the vehicle.

Frequently Asked Questions

What frequency do these sensors use?
They operate at 433MHz, the same frequency as the factory sensors.

Do I need to program these sensors before installing them?
They come pre-programmed for your specific vehicle make and model. After installation, a scan tool or re-learning procedure activates them.

How long does the battery last in these sensors?
The battery life is about 3 years under normal driving conditions.

Are these sensors a direct replacement for my original TPMS units?
Yes. They use the same clamp-in design and 433MHz frequency as the factory sensors, so they are designed as a direct replacement.

How many sensors come in the set?
The set has 4 pcs, so all four wheels can be fitted at once.

Keep your tire pressure monitoring system working reliably with this set of four pre-programmed TPMS sensors. Designed for a wide range of Chrysler, Dodge, Jeep, and Fiat vehicles, these 433MHz sensors replace OEM part numbers 56029398AB and 56029398AA. They come ready to install and require only a simple relearn procedure using an OBDII scan tool.

These sensors are 100% brand new and factory tested before shipping. Each unit is built to last with a battery life of approximately 3 to 5 years, giving you long-term peace of mind. The sensors are pre-programmed for your specific vehicle make, model, and year, so no additional programming is needed before installation.

Installation is straightforward for a trained professional. After mounting the sensors in your tires, use an OBDII scan tool to perform the relearn process. This activates the sensors and synchronizes them with your vehicle's TPMS system. For best results, have your installer scan the sensors before installation to confirm they are reading correctly.

Monitoring your tire pressure helps improve fuel efficiency, extends tire life, and enhances overall driving safety. With these direct-fit TPMS sensors, you can restore your vehicle's factory tire pressure monitoring function quickly and affordably.

Key Features and Benefits

- Pre-programmed for specific vehicle models that eliminates the need for manual programming before installation

• 433MHz operating frequency that ensures compatibility with your vehicle's TPMS receiver

• Factory tested before shipping that guarantees each sensor is working correctly out of the box

• Battery life of 3 to 5 years that provides reliable long-term performance without frequent replacements

• Replaces OEM part numbers 56029398AB and 56029398AA that makes it a direct fit for many Chrysler, Dodge, Jeep, and Fiat models

Who Is This For

- Owners of compatible Chrysler, Dodge, Jeep, or Fiat vehicles needing to replace faulty or dead TPMS sensors

• Drivers who want to restore their factory tire pressure monitoring system without visiting a dealership

• Mechanics and auto shops looking for a reliable, pre-programmed TPMS sensor set for customer repairs

• Anyone preparing for winter or summer tire changes who wants to install fresh sensors in their spare set of wheels

Usage Scenario

Mark noticed the tire pressure warning light on his 2013 Dodge Grand Caravan had been on for weeks. After checking his tires and finding no leaks, he knew the TPMS sensors were likely dead. He ordered this 4-pack, had his local tire shop install them during a routine tire rotation, and the technician used an OBDII tool to run the relearn procedure. The warning light turned off immediately, and Mark now sees accurate pressure readings on his dashboard again.

Micro Comparison

Unlike universal TPMS sensors that require complex programming and cloning, these sensors come pre-programmed for your specific vehicle. This saves you time and reduces the risk of compatibility issues. While some aftermarket sensors may need a special tool to set the correct frequency, these 433MHz units are ready to activate with a standard OBDII scan tool.

Specifications

Material: TPMS Tire Pressure Sensor

Frequency: 433MHz

Part Number: 56029398AB, 56029398AA

Battery Life: About 3 to 5 Years

Condition: 100% Brand New

Package Includes

- 4 x Tire Pressure Sensor

Why You Will Love It

No need to visit a dealership or pay for expensive programming. These sensors are pre-set for your car and just need a quick relearn to start working. Restoring your TPMS system improves safety and helps you avoid uneven tire wear or reduced fuel economy. With a battery life of several years, this is a smart, cost-effective replacement.

Questions and Answers

Question: How do I know if these sensors fit my vehicle?

Answer: Check your vehicle's year, make, and model against the compatibility list. Also verify your OEM part number is 56029398AB or 56029398AA. If unsure, send us your VIN or a photo of your old sensor before ordering.

Question: Do I need to program these sensors before installing them?

Answer: No. These sensors are pre-programmed for your vehicle. After installation, you only need to activate them using an OBDII scan tool with a relearn function.

Question: What should I do before installing the sensors on my car?

Answer: Ask your installer to scan the sensors with a TPMS tool first. This confirms the tool can read the sensor ID, frequency, tire pressure, and battery status. It helps avoid unnecessary installation fees if a sensor is defective.

Question: How long do the batteries last in these sensors?

Answer: The battery life is approximately 3 to 5 years, depending on usage and driving conditions.

Question: What if the TPMS warning light stays on after installation?

Answer: First, make sure the relearn procedure was completed correctly with an OBDII tool. If the light remains on, check that all four sensors are installed and functioning. Contact us for further troubleshooting help if needed.

Key Features

• Four-Sensor Set — The set includes four sensors, one for each tire, so all of them can be replaced at once.
• Pre-Programmed Sensors — They come pre-programmed for the vehicle, so no sensor programming is needed before fitting.
• 433MHz Operation — The sensors work at 433MHz to communicate with the vehicle's TPMS system.
• About Three-Year Battery — The battery is rated for about three years of life before replacement is needed.
• Direct OEM Replacement — They are a direct replacement for OEM part number A0009050030.

Product Specifications

• Piece Count: 4PCS
• Operating Frequency: 433MHz
• Battery Life: About three years
• Compatible Models: GLC (X253), 2015-06 to 2020-06; Mercedes-Benz A B C E Class W176 W246 W205 W212 GLE GLK GLC
• Part number: A0009050030

What It Is / How It Works

These are tire pressure monitor (TPMS) sensors sold as a set of four, one for each tire, for Mercedes-Benz vehicles.

Who It's For / Use Cases

They suit Mercedes-Benz owners who need to replace a faulty or dead TPMS sensor in their vehicle. Workshops and mechanics fitting direct-replacement sensors for Mercedes-Benz cars also use this type of set.

How to Use / Care

1. Have a professional tire service mount the sensors on the wheels.
2. Perform the re-learning procedure with an OBDII scan tool or a TPMS trigger tool.
3. Check that the TPMS warning light has turned off.

How to Choose

Start with the vehicle: match the set to your Mercedes-Benz model and year using the Compatible models row in Product Specifications. Choose a four-sensor set when you want all tire sensors replaced together, since the set covers every wheel.

Frequently Asked Questions

Do the sensors need programming before installation?
No. They come pre-programmed for the vehicle, and the re-learning procedure with a scan tool or TPMS trigger tool activates them.

What operating frequency do they use?
They operate at 433MHz, the standard frequency for many Mercedes-Benz TPMS systems.

How long does the battery last?
The battery life is about three years under normal driving conditions.

Do they fit my GLC?
The GLC (X253) from 2015-06 to 2020-06 is listed in the Compatible models row. Match your model and year against that row before ordering.

Do I need special tools to install them?
Installation uses a tire changer and torque wrench, plus an OBDII scan tool or TPMS trigger tool for the re-learning procedure. Professional installation is recommended.

Replace your faulty or dead TPMS sensors with this direct-fit tire pressure monitoring sensor. Designed for a wide range of BMW and Mercedes-Benz models, it comes pre-programmed for your specific vehicle to simplify installation and restore your tire pressure monitoring system.

This 433MHz sensor uses a long-life battery and replaces multiple OEM part numbers including 6887140-01, 36106872803, and 36106872774. It helps you maintain proper tire pressure for safer driving, better fuel economy, and extended tire life. No sensor programming is required, but activation through a scan tool or relearn procedure is needed after installation.

Each sensor is built to meet OE specifications for reliable performance. The installation process involves mounting the sensor and valve onto the rim, then mounting the tire. Professional installation is recommended to ensure correct fitting and proper system function.

Key Features and Benefits

- Pre-programmed for your specific vehicle that eliminates the need for manual programming and saves installation time

• 433MHz operating frequency that ensures reliable communication with your vehicle's TPMS system

• Battery life of about 3 years that provides long-term monitoring without frequent replacements

• Direct replacement for multiple OEM part numbers that offers broad compatibility across many BMW and Mercedes-Benz models

• Simplified relearn process using OBDII that makes activation straightforward after installation

Who Is This For

- BMW owners with a 5-Series G30, 7-Series G11, X3 G01, X5 G05, X6 G06, X7 G07, X4 G02, or iX iX3 models from 2018 onward

• Mercedes-Benz E-Class W213 owners looking for a compatible TPMS replacement sensor

• Drivers who need a pre-programmed sensor to avoid complex setup and coding

• Car owners experiencing TPMS warning lights or dead sensors who want a reliable OE-style replacement

Usage Scenario

Mark noticed his BMW X5's tire pressure warning light stayed on even after inflating all tires. A quick check confirmed one of his original TPMS sensors had failed. Instead of visiting the dealership for an expensive replacement, he ordered this pre-programmed sensor. After having his tire shop install it and perform a quick OBDII relearn, the warning light turned off, and his TPMS system started reporting accurate tire pressures again.

Micro Comparison

While generic universal TPMS sensors often require manual programming and can be tricky to set up, this sensor comes pre-programmed for your specific vehicle make and model. It matches the original equipment specifications and uses a standard 433MHz frequency, making it a straightforward replacement. The included compatibility with multiple OEM part numbers also gives you confidence it will fit your car without guesswork.

Specifications

Operating Frequency: 433MHz

Battery Life: About 3 years

Replaces Part Numbers: 6887140-01, 36106872803, 36106872774, 36106872803, 36106876955, 36106876957, 6876955-02, 6887140-02, 6887147-01, A 000 905 21 02 Q07, A0009052102, A0009052102Q02, A0009052102Q04, A0009052102Q06, A0009057105

Package Includes

1 x TPMS Tire Pressure Monitor Sensor

Why You Will Love It

You will appreciate the hassle-free installation since the sensor arrives pre-programmed for your car. The long 3-year battery life means you can install it and forget about it for years. Restoring your TPMS system gives you peace of mind on every drive, knowing your tire pressure is being monitored accurately.

Questions and Answers

Question: Does this sensor need programming before installation?

Answer: No, the sensor comes pre-programmed for your specific vehicle make and model. You only need to activate it using a scan tool or perform a relearn procedure after installation.

Question: What frequency does this TPMS sensor use?

Answer: This sensor operates at 433MHz, which is a common frequency for many BMW and Mercedes-Benz vehicles.

Question: How long does the battery last in this sensor?

Answer: The battery life is about 3 years under normal driving conditions.

Question: Which BMW models is this sensor compatible with?

Answer: It fits BMW 5-Series G30, 7-Series G11, X3 G01, X4 G02, X5 G05, X6 G06, X7 G07, iX, iX3, and Alpina XD4 models from 2018 onward. It also fits the Mercedes-Benz E-Class W213.

Question: What is the relearn procedure after installing this sensor?

Answer: The relearn procedure typically requires an OBDII tool. Some vehicles may support a no-tool relearn method depending on the model year and system.

Keep your tires properly inflated and your drive safe with this direct replacement TPMS sensor, part number 13540601. Designed for a wide range of GM vehicles, this sensor operates at 315MHz and comes pre-programmed to match your specific make, model, and year, so you can install it without complicated programming steps. It helps you monitor tire pressure in real time, reducing the risk of tire-related issues on the road.

This tire pressure sensor is built from durable metal and plastic materials, ensuring reliable performance in various driving conditions. It is a direct replacement for your worn or faulty factory sensor, restoring your vehicle's tire pressure monitoring system to full functionality. The sensor is 100% new and ready to use, helping you maintain proper tire inflation for better fuel efficiency and handling.

Installation is straightforward for a trained professional. After mounting the sensor, your vehicle will need a quick re-learning procedure to recognize the new sensor IDs. This can be done through a stationary learn mode, an automatic learn while driving, or via an OBD tool. The sensor helps you avoid traffic accidents caused by tire failure by keeping you informed of your tire's internal pressure and temperature.

Before ordering, check your vehicle's VIN code, model, and year to ensure compatibility. Make sure your existing part number matches one of the listed replacement numbers to guarantee a proper fit. For specific re-learn instructions for your vehicle, feel free to contact us for expert advice.

Key Features and Benefits

- Pre-programmed for your specific vehicle that eliminates the need for manual sensor programming, saving you time and hassle during installation.

• Direct replacement design that fits seamlessly into your existing TPMS system, restoring accurate tire pressure monitoring without modifications.

• 315MHz operating frequency that ensures reliable communication with your vehicle's onboard computer, providing consistent pressure and temperature data.

• Durable metal and plastic construction that withstands road vibrations and weather exposure, offering long-lasting performance.

• Supports multiple re-learn methods including stationary, automatic, and OBD, giving you flexible options to sync the sensor with your vehicle.

Who Is This For

- Owners of Buick Enclave, Cascada, Encore, Envision, LaCrosse, Regal, and Verano models from 2010 to 2018 looking to replace a faulty or dead TPMS sensor.

• Drivers of Cadillac ATS, CTS, Escalade, SRX, XTS, and other compatible Cadillac models needing a pre-programmed sensor for a quick swap.

• Chevrolet and GMC truck and SUV owners with models like Silverado, Tahoe, Suburban, Yukon, and Sierra from 2014 to 2018 requiring a direct replacement sensor.

• DIY mechanics and professional installers seeking a reliable, no-programming-required TPMS sensor with easy re-learn compatibility.

Usage Scenario

Mark noticed the tire pressure warning light on his 2016 Buick Enclave dashboard was staying on even after inflating all tires. After a quick check, he found his original TPMS sensor was no longer transmitting data. He ordered this 13540601 sensor, verified his part number matched, and had it installed by his local mechanic. After a simple OBD re-learn procedure, the warning light turned off, and he could see accurate pressure readings again. Now he drives with confidence, knowing his tire monitoring system is working properly.

Micro Comparison

Unlike aftermarket sensors that require complex programming tools and lengthy setup, this TPMS sensor comes pre-programmed specifically for your vehicle, so you can skip that step entirely. While some universal sensors need manual configuration and may not communicate correctly with your car's system, this direct replacement part is designed to match your factory specs, ensuring reliable data transmission right after a quick re-learn.

Specifications

Material: Metal and plastic

Operating Frequency: 315MHz

Manufacture Part Number: 13540601

Replacement Part Numbers: 12768826, 13589255, 13581558, 13581559, 13598786, 13598772, 13598774, 2092290, 13598771, 15922396, 20923680, 22853741, 13586335, 25799331, 25920615, 4313085Z00, 15254101, 19332515, 13589597, 20922900, 22854866, 23445327, 32443572

Fitment Type: Direct Replacement

Color: As the pictures show

Package Includes

- 1 or 4 pieces of Tire Pressure Sensor (depending on your selection)

Why You Will Love It

You will love how this sensor restores your vehicle's safety feature without the need for complicated programming. It gives you peace of mind knowing your tire pressure is monitored accurately, helping you avoid blowouts and improve fuel economy. With easy installation and reliable performance, it is a simple fix that keeps your driving experience smooth and secure.

Questions and Answers

Question: Does this sensor come pre-programmed for my specific car?

Answer: Yes, the sensor is pre-programmed for your specific make, model, and year, so no additional programming is needed before installation.

Question: What do I do after installing the sensor?

Answer: After installation, your vehicle needs a re-learn procedure to recognize the new sensor. This can be done using a stationary learn, automatic learn while driving, or an OBD tool.

Question: How do I know if this sensor fits my vehicle?

Answer: Check your current sensor's part number against the list of replacement numbers. Also, verify your vehicle's VIN, model, and year using the fitment information provided in the listing.

Question: Is professional installation required?

Answer: Installation of TPMS sensors is recommended to be performed only by trained professionals to ensure proper mounting and sealing.

Question: Can I use this sensor on a Chevrolet Silverado 2015?

Answer: Yes, this sensor is compatible with Chevrolet Silverado models from 2014 to 2018, including the 2015 model, as long as your existing part number matches one of the listed replacement numbers.

Replace your faulty tire pressure sensor with a direct-fit TPMS unit designed for several Renault and Lada models. This 433MHz sensor matches OEM part numbers 407000435R and 407003743R, offering a straightforward solution for restoring your vehicle's tire monitoring system. It comes pre-programmed for your specific vehicle, so you only need a scan tool to activate it after installation.

Each sensor is built from durable plastic and metal materials to withstand road conditions and last through many tire rotations. It has been professionally tested to ensure reliable performance and trouble-free installation. By keeping your TPMS active, you maintain better tire pressure awareness, which supports safer driving and can help extend tire life.

This unit works on the front or rear, left or right positions of your vehicle. Whether you need one replacement or a full set of four, this sensor provides a dependable fix to keep your dashboard warning light off and your tires properly monitored.

Key Features and Benefits

- Pre-programmed for your vehicle that requires no additional sensor programming, just activate with a scan tool for a quick setup.

• High-strength plastic and metal construction that delivers long service life and reduces the chance of early failure.

• Professionally tested performance that ensures reliable communication with your vehicle's TPMS system for accurate pressure readings.

• Compatible with front, rear, left, and right positions that gives you flexibility for any wheel on your car.

• Direct replacement for OEM parts 407000435R and 407003743R that makes it easy to find the right fit for your repair.

Who Is This For

- Renault Megane 3 owners from 2008 to 2019 who need a direct replacement for a failed TPMS sensor.

• Renault Scenic 3 drivers looking for a cost-effective way to restore their tire pressure monitoring system.

• Renault Latitude and Laguna 3 owners seeking a pre-programmed sensor that works without complex setup.

• Lada Vesta owners from 2015 to 2019 who want a reliable TPMS sensor compatible with their vehicle.

Usage Scenario

Marc noticed the TPMS warning light on his 2012 Renault Megane 3 dashboard flickering on and off during his morning commute. After checking his tire pressures with a gauge and finding them all correct, he realized one of his original sensors had failed. He ordered this pre-programmed replacement, had a local tire shop install it, and used a standard TPMS scan tool to activate it. The warning light turned off immediately, and he now drives with confidence knowing his tire pressure monitoring system is fully functional again.

Micro Comparison

Unlike universal TPMS sensors that require complex cloning or programming with specialized equipment, this unit comes pre-programmed for your specific Renault or Lada model. You avoid the extra steps and potential compatibility issues that come with generic sensors. It is a straightforward replacement option that focuses on fit and reliability for your vehicle.

Specifications

- Material: Plastic, Metal

• Frequency: 433MHz

• OEM Part Numbers: 407003743R, 407000435R

• Model Number: S180052064A

• Interchange Part Numbers: 407000435R, 407003743, S180052064A

Package Includes

- 1 or 4 TPMS Tire Pressure Monitoring Sensors (depending on selected quantity)

Why You Will Love It

You get a sensor that fits your car without the headache of figuring out compatibility or programming codes. It restores an important safety feature that helps you catch slow leaks and underinflated tires before they become a bigger problem. With tested reliability and a simple activation process, it is a practical upgrade for your daily driving peace of mind.

Questions and Answers

Question: Will this sensor work on my 2016 Renault Megane 3?

Answer: Yes, this sensor is compatible with Renault Megane 3 models from 2008 to 2019.

Question: Do I need to program this sensor before installation?

Answer: No, the sensor comes pre-programmed for your vehicle. You only need to activate it with a TPMS scan tool after installation.

Question: Can I use this sensor on any wheel position?

Answer: Yes, it is designed for left, right, front, and rear positions.

Question: How do I know if this sensor matches my old one?

Answer: Check your original sensor's part number. This unit replaces OEM numbers 407000435R and 407003743R.

Question: Is this sensor only for Renault vehicles?

Answer: It is also compatible with Lada Vesta models from 2015 to 2019 in addition to several Renault models.

Key Features

• 433MHz Communication — 433MHz frequency communication for accurate tire pressure readings.
• High-Strength Materials — High-strength plastic and metal materials for long service life and durability.
• Professionally Tested Ensure — Professionally tested to ensure reliable performance and enhance vehicle safety.

Product Specifications

• OEM Number: 68193586AC
• Frequency: 433MHz
• Material: Plastic, Metal
• Quantity: 1 or 4 TPMS sensors (as selected)
• Vehicle Fitment: Jeep Compass , Jeep Wagoneer , Jeep Renegade , Chrysler 200 , Chrysler Pacifica

What It Is / How It Works

This TPMS tire pressure monitoring sensor is a replacement sensor for the tire pressure monitoring system on Chrysler and Jeep vehicles. It matches OEM part number 68193586AC, so it serves as a straightforward swap for the original equipment.

Who It's For / Use Cases

Replacement tire pressure sensors suit vehicle owners whose tire pressure warning light has come on or whose sensor is missing or damaged, and who want a replacement that matches the original equipment part number. They also suit do-it-yourself car owners who prefer a direct-fit part for a listed vehicle.

How to Use / Care

1. It is a direct replacement part, so you can install it yourself without complex modifications.
2. Compatible with multiple Chrysler and Jeep models for versatile use.
3. It has been pre-tested for compatibility with specific Chrysler and Jeep models, so you can install it with confidence.
4. This sensor is a direct replacement for the 68193586AC part and is designed for a straightforward install.

How to Choose

Start with your vehicle. Match your make, model, and model year against the Vehicle Fitment row in the specifications before you order. Confirm that OEM part number 68193586AC matches the part you are replacing, and check that the sensor operates at 433MHz.

Frequently Asked Questions

Will this sensor work on my 2018 Jeep Compass?
Yes, this sensor is compatible with the Jeep Compass from 2017 to 2021, so a 2018 model falls within that listed range. Confirm your vehicle details against the Vehicle Fitment row in the specifications.

Do I need to program this sensor before installation?
This sensor is a direct replacement for the 68193586AC part. Some vehicles may require a relearn procedure after installation, so check your vehicle requirements before you start.

What frequency does this TPMS sensor use?
It operates at 433MHz, and the frequency is also listed in the specifications.

Is this sensor tested before it ships?
Yes, the sensor has been professionally tested to ensure trouble-free performance and safety.

Can I install this sensor myself?
Yes, it is designed for easy installation at the left, right, front, or rear wheel positions. Basic tools are usually sufficient for the swap.

Keep your Mercedes-Benz tires at the right pressure with this TPMS Tire Pressure Monitoring System. It uses a 433MHz frequency and fits a wide range of models including the GLA, B, GLB, GLE, E, and Sprinter.

This sensor is designed to replace your original part with the OEM number A0009058706 or A0009052102. It comes pre-programmed for your specific Mercedes-Benz model, year, and make. A simple re-learning process with a scan tool gets it working on your vehicle.

Each sensor has a battery life of about three years. This helps you avoid frequent replacements and keeps the system running reliably. It is a direct replacement part that helps restore factory tire pressure monitoring functionality.

Driving with properly inflated tires improves fuel economy and extends tire life. This TPMS sensor gives you real-time pressure data so you can drive with confidence. It is a practical upgrade for any compatible Mercedes-Benz.

Key Features and Benefits

- Direct replacement for OEM part numbers A0009058706 and A0009052102 that ensures a correct fit

• 433MHz operating frequency that works with your Mercedes-Benz factory system

• Battery life of about three years that reduces maintenance frequency

• Pre-programmed for your specific vehicle make and model that simplifies installation

• Requires activation via scan tool or re-learning procedure that integrates seamlessly with your car

Who Is This For

- Mercedes-Benz owners who need to replace a failing or dead TPMS sensor

• Drivers who want to restore factory tire pressure monitoring on compatible models

• DIY mechanics looking for a direct fit replacement part for their Mercedes

• Fleet managers maintaining Sprinter vans or E-Class vehicles with original TPMS systems

Usage Scenario

Mark noticed his Mercedes-Benz GLA tire pressure warning light stayed on even after checking the air. A quick scan revealed the original TPMS sensor had failed. He ordered this replacement, used a scan tool to activate it, and the warning light turned off. Now he gets accurate pressure readings every time he drives.

Micro Comparison

This TPMS sensor is a direct OEM replacement part built to match the original specifications. It uses the same 433MHz frequency and fits a wide range of Mercedes-Benz models. Other generic sensors may require additional programming or adapters, but this one is pre-programmed for your vehicle.

Specifications

Model Number: A0009058706

OEM Number: A0009052102

Frequency: 433MHz

Battery Life: About 3 years

Application: For Mercedes-Benz C-Class W206, S-Class/Maybach W223, CLS-Class W257, GLA-Class H247, B-Class W247, GLB-Class X247, CLA-Class C118/X118, GLE-Class V167/C167, GLS-Class X167, E-Class W213/S213/C238/A238, Sprinter VS30

Package Includes

- 1 x TPMS Tire Pressure Sensor

Why You Will Love It

This sensor restores your Mercedes-Benz factory tire pressure monitoring without complicated wiring or programming. The three-year battery life means you can install it and forget about it. It gives you peace of mind knowing your tire pressure is always accurate.

Questions and Answers

Question: What frequency does this TPMS sensor use?

Answer: It uses 433MHz.

Question: Does this sensor come pre-programmed for my car?

Answer: Yes, it comes pre-programmed specifically for your vehicle's make, model, and year.

Question: How do I activate this sensor after installation?

Answer: You need to activate it using a scan tool or by following the re-learning procedure for your vehicle.

Question: What is the battery life of this TPMS sensor?

Answer: The battery lasts about three years.

Question: Which Mercedes-Benz models is this sensor compatible with?

Answer: It fits C-Class, S-Class/Maybach, CLS, GLA, B, GLB, CLA, GLE, GLS, E, and Sprinter models from specific years.

Key Features

• 433 MHz Operation — It operates at 433 MHz and communicates with the vehicle's TPMS system.
• About 5-Year Battery — The long-life battery is designed to last about 5 years, which reduces how often sensors need replacing.
• Set of Four Sensors — The set covers all four wheels at once.
• Direct OE Replacement — It is a direct replacement for OE part number 13581561.

Product Specifications

• Operating frequency: 433 MHz
• Battery life: About 5 years
• Package quantity: 4 sensors
• Condition: New
• Part number: 13581561

What It Is / How It Works

This TPMS sensor is a tire pressure monitoring sensor sold as a direct replacement for part number 13581561. It is built to send tire pressure readings to the vehicle's onboard system, which alerts the driver to pressure loss.

Who It's For / Use Cases

It is for owners of 2014-2019 Opel Corsa E or Adam models who need a replacement tire pressure sensor. It also suits Vauxhall Corsa, Adam or Meriva drivers from 2014 to 2019 who want a direct-fit sensor, and anyone replacing all four sensors at once.

How to Use / Care

1. Check the part number on the existing sensor against 13581561 before ordering.
2. Have the sensors installed by trained professionals with a proper TPMS tool, which is needed to learn the new sensor IDs to the vehicle.
3. Fit all four sensors at once, since the set includes four units.

How to Choose

Choose this sensor by matching the part number on the existing sensor to 13581561 and confirming the vehicle model and year before ordering. It operates at 433 MHz. A set of four covers all wheels at once, which keeps the replacements consistent.

Frequently Asked Questions

How do I know if this sensor is compatible with my car?
Check the part number on the existing sensor. If it is 13581561, this sensor fits. Confirm your vehicle model and year before ordering.

Can I install these sensors myself?
Installation is recommended to be performed by trained professionals. A proper TPMS tool is needed to learn the new sensor IDs to your vehicle.

How long does the battery last in these sensors?
The battery is designed to last about 5 years under normal driving conditions.

Does this sensor come as a single unit or a set?
The package includes 4 sensors, enough for all four wheels of your vehicle.

What frequency does this sensor use?
It operates at 433 MHz, the frequency used by many Opel, Vauxhall and Chevrolet TPMS systems.

Key Features

• 433MHz Frequency — It operates on 433MHz, the frequency used for reliable communication with your vehicle's TPMS receiver.
• Pre-Programmed Setup — It comes pre-programmed for your vehicle make and model, so no sensor programming is required.
• Direct OEM Replacement — It is a direct replacement built to factory specifications, with OEM number 802000012AA.
• Simplified OBDII Relearn — Activation uses a simplified relearn with an OBDII tool, which keeps setup quick for trained professionals.

Product Specifications

• Frequency: 433MHz
• Condition: 100% new, pre-programmed
• Activation: Requires scan tool or relearn procedure
• Quantity: 1 or 4 TPMS tire pressure sensors, depending on selection
• Part number: 802000012AA

What It Is / How It Works

This tire pressure sensor is a TPMS unit made to replace a worn or failed sensor in a Chery Tiggo. It is a direct replacement sensor designed for several Chery Tiggo models. Once installed and activated, the system displays tire pressure data directly on your dashboard. Tire pressure sensors in general report each wheel's pressure to the vehicle's monitoring system.

Who It's For / Use Cases

Chery Tiggo owners whose tire pressure sensor has worn out or stopped working are the buyers this replacement suits. It suits owners who want a unit that arrives pre-programmed for their model, so setup is not a manual task.

How to Use / Care

1. Have the sensor installed by a trained professional.
2. Activate the sensor with a scan tool, or perform a simplified relearn procedure with an OBDII tool.
3. Once installed and activated, read tire pressure data on the dashboard.

How to Choose

Match your vehicle's Chery Tiggo model and build dates to the listed ranges. Tiggo2 vehicles from April 2017 to December 2020, Tiggo3 from January 2018 to December 2020, Tiggo4 from April 2019 to December 2021, Tiggo7 from April 2019 to March 2021, and Tiggo8 from October 2019 to December 2022 are covered.

Frequently Asked Questions

Does it work with a 2019 Chery Tiggo8?
It is compatible with Chery Tiggo8 models manufactured from October 2019 to December 2022.

Do I need to program this sensor before installation?
No. It comes pre-programmed for your vehicle make and model. Activation needs a scan tool or a relearn procedure with an OBDII tool.

Can I install this TPMS sensor myself?
Installation is recommended only for trained professionals to ensure proper fit and activation.

What is the OEM number for this sensor?
The OEM part number is 802000012AA, and the sensor is built to match the original equipment specifications.

What frequency does this sensor use?
It uses the 433MHz frequency, which is the frequency used to communicate with the vehicle's TPMS receiver.

Keep your tires at the right pressure with this direct-fit 433MHz TPMS sensor. Designed for a wide range of Chevrolet, Opel, Vauxhall, and Saab models, it comes pre-programmed to match your vehicle's original system. No complex setup is needed, just a simple relearn process after installation.

This sensor replaces multiple OEM part numbers including 13581560 and 13598775, making it a versatile choice for many European and American car models. Each unit is built with a durable PCBA board and battery, ensuring stable and accurate pressure readings for miles to come.

Whether you need one sensor or a full set of four, this option provides a reliable replacement for worn-out or damaged TPMS units. It helps you maintain proper tire inflation, which supports better fuel economy and safer handling on the road.

Installation is straightforward for a trained professional. The sensor activates during the vehicle's relearn procedure, so it integrates smoothly with your car's monitoring system without additional programming tools.

Key Features and Benefits

- Pre-programmed 433MHz frequency that matches your vehicle's original TPMS system for direct compatibility

• 100% brand new PCBA board and battery construction provides reliable and stable performance

• No sensor programming required, just a simple relearn process using an OBDII tool for quick setup

• Replaces multiple OEM numbers including 13581560 and 13598775 for broad vehicle coverage

• Available in packs of 1 or 4 pieces to suit individual replacement or full set upgrades

Who Is This For

- Owners of Chevrolet Volt, Opel Astra J, Insignia A, Zafira, or Vauxhall Astra MK VI models needing a TPMS replacement

• Drivers with a faulty or missing tire pressure sensor who want a direct-fit, pre-programmed solution

• Car enthusiasts or mechanics looking for an affordable aftermarket alternative to dealer-purchased sensors

• Anyone maintaining a fleet of compatible vehicles who needs consistent, reliable TPMS components

Usage Scenario

Mark noticed the tire pressure warning light on his Opel Insignia dashboard flickering on and off. After checking the tires manually, he found the pressure was fine, but the sensor was failing. He ordered a set of four of these 433MHz TPMS sensors, had a local shop install them, and performed a quick OBDII relearn. The warning light went off, and he now drives with confidence knowing his tire pressure is accurately monitored.

Micro Comparison

Unlike generic universal TPMS sensors that require complex programming and adapters, this unit comes pre-programmed for your specific vehicle make and model. It matches the original 433MHz frequency and replaces common OEM numbers like 13581560, so you get a seamless fit without extra steps. This direct replacement approach saves time and reduces the chance of compatibility issues.

Specifications

Compatible OEM Numbers: 13581560, 13598775, 13327259, 13348393, 13581562

Frequency: 433MHz

Material: PCBA board and battery

Condition: 100% brand new

Package Includes

- 1 or 4 pieces TPMS Tire Pressure Sensor (based on selected option)

Why You Will Love It

You will appreciate the straightforward installation and reliable performance that keeps your tire pressure monitoring system working as intended. The pre-programmed design removes the hassle of manual programming, letting you get back on the road faster. With broad vehicle compatibility and durable construction, this sensor offers long-term peace of mind at a practical price.

Questions and Answers

Question: Does this sensor work with my 2013 Opel Astra J?

Answer: Yes, this sensor is compatible with Opel Astra J models from 2009 to 2015.

Question: Do I need to program the sensor before installation?

Answer: No, the sensor comes pre-programmed for your vehicle. You only need to perform a relearn procedure using an OBDII tool.

Question: What is the frequency of this TPMS sensor?

Answer: It operates at 433MHz, which is the standard frequency for many Chevrolet, Opel, and Vauxhall models.

Question: Can I install this sensor myself?

Answer: Installation is recommended to be performed by a trained professional to ensure correct mounting and sealing.

Question: How do I know if this sensor will fit my car?

Answer: Check your vehicle's original part number against the compatible OEM numbers listed, such as 13581560 or 13598775, before ordering.

Key Features

• Pre-Programmed Sensors — These sensors come pre-programmed for the specified Jeep model, so no sensor programming is needed before installation.
• 433MHz Frequency — The sensors operate on 433MHz, supporting communication between each sensor and the vehicle's TPMS system.
• New PCBA Board and Battery — Each sensor uses a 100% new PCBA board and battery built for dependable performance.
• Four-Sensor Set — The set contains four sensors, so all tire sensors can be replaced at the same time for consistent readings.
• Direct Replacement Fit — It fits the listed Jeep models without modifications or adapters.

Product Specifications

• Compatible Jeep Compass: 2006-2017
• Compatible Jeep Grand Cherokee: 2004-2010
• Compatible Jeep Patriot: 2014-2017
• Piece Count: 4PCS
• Frequency: 433MHz
• Material: PCBA board and battery
• OEM Number: 56029481AB

What It Is / How It Works

These are 433MHz TPMS tire pressure sensors sold as a four-piece set for Jeep Compass, Grand Cherokee, and Patriot models. Each sensor is designed to replace an original tire pressure sensor in the vehicle's tire pressure monitoring system.

Who It's For / Use Cases

Owners preparing for a tire change or rotation who want to update all tire sensors at the same time are the typical buyers for a replacement sensor set. Drivers whose original sensors have worn out and need a direct-fit replacement for the listed Jeep models also fit this use.

How to Use / Care

1. Installation is recommended to be performed by a trained professional.
2. Simply install them and use a scan tool or OBDII relearn procedure to activate the system.
3. A quick check revealed the original TPMS sensors had finally worn out after years of use.
4. He ordered this four-sensor set, had a local shop install them, and used an OBDII scanner to complete the relearn process.

How to Choose

Start with the Jeep model and year range shown in Product Specifications and compare them with your vehicle. Check your existing part number against the OEM number 56029481AB before ordering. Match the 433MHz frequency to your vehicle's system. When several sensors are due for replacement, a four-sensor set lets every tire be updated together.

Frequently Asked Questions

Do these sensors need programming before installation?
No, they come pre-programmed for your specific Jeep model. You only need to activate them with a scan tool or OBDII relearn process after installation.

Will these fit my 2010 Jeep Grand Cherokee?
Yes, they are designed for Jeep Grand Cherokee models from 2004-07 to 2010-04. Confirm that your vehicle's part number matches OEM number 56029481AB before purchasing.

Can I install these sensors myself?
Installation is recommended to be performed by trained professionals. The sensors are mounted inside the tire and then activated using an OBDII tool.

What is the frequency of these sensors?
They operate at 433MHz, which is the standard frequency for many Jeep TPMS systems.

How many sensors come in one set?
The set contains four sensors, one for each tire on the vehicle.