Keep your tire pressure monitored accurately with this direct replacement TPMS sensor, designed for the Nissan Micra and select Nissan and Infiniti models from 2018 to 2024. Operating at 433MHz, this sensor helps you maintain proper tire inflation for safer driving and better fuel economy.

This sensor replaces OEM part numbers 40700-4CB0B and 40700-4CB0A, making it a simple swap for your original equipment. It comes pre-programmed for your specific vehicle make, model, and year, so you only need to activate it using a scan tool or perform a re-learn procedure after installation.

The clamp-in design ensures a secure fit inside your tire, while the battery is rated to last about three years under normal driving conditions. If you have any issues after receiving the product, contact us right away for support.

Key Features and Benefits

- 433MHz operating frequency that matches your vehicle's TPMS system for reliable communication

• Pre-programmed for your specific make, model, and year to simplify installation

• Clamp-in design that provides a secure and stable fit inside the tire

• Battery life of about 3 years for long-lasting performance

• Direct replacement for OEM part numbers 40700-4CB0B and 40700-4CB0A

Who Is This For

- Nissan Micra owners with model years 2017 to 2023 needing a TPMS replacement

• Nissan Altima drivers with vehicles from 2018 to 2024 requiring a new tire pressure sensor

• Infiniti QX50 owners with models from 2018 to 2024 looking for a direct-fit TPMS sensor

• DIY car owners who want to replace a faulty TPMS sensor without visiting a dealership

Usage Scenario

Alex noticed the tire pressure warning light on his 2020 Nissan Micra stayed on even after inflating the tires. A quick check at the local shop confirmed one of the TPMS sensors had failed. Instead of paying for an expensive dealer replacement, Alex ordered this pre-programmed sensor, had it installed at a nearby tire shop, and performed a simple OBD re-learn procedure. The warning light turned off, and Alex now drives with confidence knowing his tire pressure is monitored accurately.

Micro Comparison

Compared to generic universal TPMS sensors that require complex programming and may not work reliably, this sensor is pre-programmed for your specific Nissan or Infiniti model. It uses the correct 433MHz frequency and matches the OEM design, so you get a straightforward replacement without compatibility issues or extra setup steps.

Specifications

Material: CLAMP-IN

Model Number: 40700-4CB0B, 407004CB0B, 40700-4CB0A

OEM Number: 40700-4CB0B

Frequency: 433MHz

Battery Life: About 3 years

Package Includes

- 1 x TPMS Sensor

Why You Will Love It

You will love the peace of mind that comes with accurate tire pressure monitoring, helping you avoid uneven tire wear and improve fuel efficiency. This sensor is a direct replacement that saves you time and money compared to dealer parts. It is designed to work seamlessly with your vehicle's existing TPMS system.

Questions and Answers

Question: Does this TPMS sensor come pre-programmed?

Answer: Yes, it is pre-programmed for your specific vehicle make, model, and year. You will need to activate it with a scan tool or perform a re-learn procedure after installation.

Question: What frequency does this sensor use?

Answer: It operates at 433MHz.

Question: How long does the battery last?

Answer: The battery is rated to last about 3 years under normal driving conditions.

Question: What is the re-learn procedure for this sensor?

Answer: The recommended re-learn method is OBD re-learn, which can be done with a compatible scan tool or at a tire shop.

Question: Will this sensor fit my 2019 Nissan Altima?

Answer: Yes, it fits Nissan Altima models from 2018-11 to 2024-10, as well as Nissan Micra and Infiniti QX50 within the listed date ranges.

Add a rugged and unique look to your vehicle with these 4 grenade design valve stem caps. Made from aluminum alloy, they offer a simple way to replace missing or worn-out caps while adding a touch of personal style to your wheels.

These caps help prevent air leakage and keep dirt and debris from damaging your valve stems. The easy screw-on design means you can install them in seconds without any tools, giving your car, truck, or motorcycle a distinctive upgrade.

Whether you want to customize your daily driver or add a conversation starter to your ride, these valve caps are a small detail that makes a big difference. They fit standard valve stems and are built to last.

Key Features and Benefits

- Grenade design that adds a unique and personal style to your vehicle's wheels

• Aluminum alloy construction that provides durability and a quality feel

• Helps prevent air leakage that keeps your tires properly inflated longer

• Blocks dirt and objects that can damage the valve stem over time

• Easy screw-on installation that lets you upgrade your look in seconds

Who Is This For

- Car owners looking for a simple and affordable way to personalize their ride

• Truck drivers who want a tough-looking accessory that matches their vehicle's style

• Motorcycle riders wanting to add a small custom detail to their bike

• Anyone who needs to replace missing or damaged valve stem caps

Usage Scenario

Mike noticed the plastic cap on his truck's rear tire was cracked and letting in dust. He ordered these grenade design caps, screwed them on in under a minute, and instantly gave his wheels a sharper, more aggressive look. Now every time he walks up to his truck, he sees a small upgrade that stands out.

Micro Comparison

Standard plastic valve caps often crack or fade over time, and they don't add any personality to your vehicle. These aluminum alloy caps offer a stronger build and a distinctive grenade design that sets your wheels apart without needing a full set of expensive custom rims.

Specifications

- Material: Aluminum alloy

• Design: Grenade style

• Quantity: 4 pieces per lot

Package Includes

- 4 x Grenade design valve stem caps

Why You Will Love It

This set gives you an easy way to express your style without a big investment. The durable aluminum build means they will last, and the unique shape will make your vehicle stand out in any parking lot.

Questions and Answers

Question: Will these fit my car's valve stems?

Answer: Yes, they fit standard tire valve stems on most cars, trucks, and motorcycles.

Question: Are these caps made of metal or plastic?

Answer: They are made from aluminum alloy for better durability.

Question: Do they come with any tools for installation?

Answer: No tools are needed. You simply screw them onto the valve stem by hand.

Question: Will these caps prevent air from leaking out of my tires?

Answer: They help prevent leakage by keeping the valve stem sealed and blocking dirt.

Question: How many caps come in one order?

Answer: You receive 4 caps in one lot, enough for a standard vehicle.

Keep your tire pressure monitoring system working reliably with this 315MHz TPMS sensor designed for 2009-2013 Toyota Corolla and select Lexus models. It replaces multiple OEM part numbers including 42607-33021, 42607-33011, and 42607-06011 for a straightforward swap.

This tire pressure sensor communicates at 315MHz frequency and comes pre-programmed for your specific vehicle make and model year. It helps you maintain proper tire inflation by sending real-time pressure data to your dashboard display. A simple activation using a scan tool or re-learning procedure gets it working with your existing system.

Built to last with a battery life of about three years, this sensor provides long-term monitoring without frequent replacements. It is a direct-fit replacement for several Toyota and Lexus models, making it a practical choice when you need to replace a faulty or dead TPMS unit.

Each sensor is packaged in a standard retail box, ready for installation. Whether you are replacing one damaged sensor or stocking up for future needs, this unit matches the original specifications for accurate readings and consistent performance.

Key Features and Benefits

- 315MHz operating frequency that matches your vehicle's TPMS system for reliable communication

• Pre-programmed compatibility for 2009-2013 Toyota Corolla and select Lexus models that saves you programming time

• Direct replacement for OEM numbers 42607-33021, 42607-33011, and 42607-06011 that ensures a proper fit

• Battery life of approximately three years that reduces the need for frequent sensor swaps

• Standard packaging that keeps the sensor protected during shipping and storage

Who Is This For

- Toyota Corolla owners with 2009 to 2013 model years who need a replacement TPMS sensor

• Lexus drivers with compatible models including ES, GS, GX, IS, LS, LX, RX, and SC series from specific production dates

• DIY car owners who want to replace a faulty tire pressure sensor without dealer visits

• Mechanics and auto service shops looking for a reliable aftermarket TPMS option for Toyota and Lexus vehicles

Usage Scenario

Mark noticed the tire pressure warning light on his 2011 Toyota Corolla dashboard staying on even after checking all four tires. After a quick scan at his local shop, he learned the left rear TPMS sensor had failed. He ordered this replacement sensor, installed it himself in under fifteen minutes, and used a basic TPMS scan tool to activate it. The warning light turned off on his next drive, and his tire pressure readings returned to normal.

Micro Comparison

This sensor is a direct-fit replacement for your original TPMS unit, so you do not need to modify your wheels or wiring. Many universal sensors require programming or cloning before they work, but this one comes pre-programmed for your specific vehicle. It matches the OEM frequency and part numbers, which simplifies installation and reduces the chance of compatibility issues.

Specifications

Frequency: 315MHz

Battery Life: Approximately 3 years

Interchange Part Numbers: 42607-33021, 42607-33011, 42607-06011, 42607-35010, PMV-107

Package Includes

- 1 x TPMS Tire Pressure Sensor

Why You Will Love It

You get a hassle-free replacement that fits your Toyota or Lexus without extra programming steps. The three-year battery life means you can install it and forget about it for years. It gives you peace of mind knowing your tire pressure monitoring system is working correctly again.

Questions and Answers

Question: What frequency does this TPMS sensor use?

Answer: This sensor operates at 315MHz, which is the standard frequency for many Toyota and Lexus vehicles from the listed model years.

Question: Does this sensor need programming before installation?

Answer: The sensor comes pre-programmed for your specific vehicle make and model year. You will need to activate it using a scan tool or perform a re-learning procedure after installation.

Question: How long does the battery last in this TPMS sensor?

Answer: The battery is designed to last approximately three years under normal driving conditions.

Question: Will this sensor work on my 2010 Lexus ES 350?

Answer: Yes, this sensor is compatible with Lexus ES models produced from April 2006 to September 2012, which includes the 2010 ES 350.

Question: What is the re-learning procedure for this sensor?

Answer: A trigger tool is required to complete the re-learning process. You can use a TPMS scan tool or visit a tire shop to activate the sensor after installation.

Replace your worn or faulty TPMS sensors with this set of four direct-fit tire pressure sensors, designed specifically for the Jeep Cherokee KL from 2013 to 2020. These sensors operate at a 434MHz frequency and match the factory specifications of your vehicle, helping to restore your tire pressure monitoring system without the need for complex programming.

Each sensor is a direct replacement for your original equipment, fitting into the front, left, rear, and right positions on your vehicle. They come pre-programmed for your specific make, model, and year, so you can install them with confidence. A simple activation process using a scan tool or a "re-learning" procedure is all that is needed to get them working.

Maintaining proper tire pressure is key to safe driving and better fuel economy. These sensors alert you to low tire pressure, helping you avoid uneven tire wear, blowouts, and poor handling. With a battery life of about three years, they provide reliable, long-term performance for your daily commute or long road trips.

Installation is recommended to be done by a trained professional. The sensors are designed to be a hassle-free upgrade, saving you time and the cost of a dealership visit. Keep your Jeep Cherokee's tire pressure monitoring system running smoothly with these compatible, high-quality sensors.

Key Features and Benefits

- Direct replacement design that fits your Jeep Cherokee KL from 2013 to 2020, ensuring a simple swap with your old sensors.

• Pre-programmed sensors that require no additional programming, saving you time and the need for specialized equipment.

• 434MHz operating frequency that matches your vehicle's factory system, providing accurate and consistent tire pressure readings.

• Battery life of about three years, offering dependable performance and reducing the frequency of replacements.

• Compatible with multiple OE part numbers including 68249197AA, 68239720AB, 68239720AC, 68239720AA, and 68157568AA, giving you a wide fitment range.

Who Is This For

- Jeep Cherokee KL owners from model years 2013 to 2020 who need to replace a faulty or dead TPMS sensor.

• DIY car owners who want a direct-fit, pre-programmed sensor to avoid a trip to the dealership for programming.

• Drivers looking for a cost-effective way to restore their tire pressure monitoring system and improve safety on the road.

• Mechanics and auto shops seeking reliable, compatible TPMS sensors for customer vehicles.

Usage Scenario

Mark noticed his Jeep Cherokee's tire pressure warning light was flickering on and off. After a quick check, he found one of his TPMS sensors had stopped working. Instead of spending a lot at the dealership, he ordered this set of four sensors. In less than an hour at his local mechanic, the old sensors were swapped out, and the new ones were activated. The warning light turned off, and Mark felt confident driving his family on their weekend trip, knowing his tire pressure was being monitored correctly.

Micro Comparison

Unlike universal TPMS sensors that require complex programming and cloning, these sensors come pre-programmed for your specific Jeep Cherokee KL. This eliminates the need for a special programming tool and reduces the chance of installation errors. They are a direct replacement for your original sensors, so you get a reliable fit without any guesswork.

Specifications

Sensor Type: Tire Pressure Monitoring Sensor

Operating Frequency: 434MHz

Battery Life: About 3 years

Placement on Vehicle: Front, Left, Rear, Right

Fitment Type: Direct Replacement

Interchange Parts Number: 68249197AA, 68239720AB, 68239720AC, 68239720AA, 68157568AA

Package Includes

- 4 x Tire Pressure Sensors

Why You Will Love It

Restore your Jeep's safety system with a set of sensors that fit perfectly and work right out of the box. You will save money compared to a dealership replacement and gain the peace of mind that comes from knowing your tire pressure is always accurate. It is a simple, reliable upgrade that keeps you and your passengers safe on every drive.

Questions and Answers

Question: Do these sensors need to be programmed before installation?

Answer: No, they come pre-programmed for your specific Jeep Cherokee KL model year. You only need to activate them using a scan tool or perform a "re-learning" procedure after installation.

Question: What is the operating frequency of these TPMS sensors?

Answer: They operate at 434MHz, which matches the factory frequency for your Jeep Cherokee KL.

Question: How long does the battery in these sensors last?

Answer: The battery life is about three years, depending on usage and driving conditions.

Question: Can I install these sensors myself?

Answer: Installation involves dismounting the tire and handling the sensor components. It is recommended to have them installed by a trained professional to ensure proper fit and function.

Question: Will these sensors fit my 2016 Jeep Cherokee?

Answer: Yes, these sensors are designed for the Jeep Cherokee KL from 2013 to 2020. Please confirm your vehicle's OE part number, such as 68249197AA or 68239720AB, to ensure a perfect match.

Keep your Jeep Renegade driving safely with a direct replacement TPMS sensor that works for model years 2017 through 2023. This 433MHz tire pressure sensor is designed to match the original equipment specifications and comes pre-programmed for your vehicle, so installation is straightforward and reliable. It helps you monitor tire air pressure in real time, which improves fuel efficiency, extends tire life, and gives you peace of mind on every trip.

This sensor fits the tire valve stem with a snap-in installation method and uses an auto-relearn function to sync with your Jeep's onboard system. That means once it's installed, the vehicle automatically recognizes the new sensor without needing extra programming steps. The sensor is built with durable materials to withstand road conditions and temperature changes, and it includes a battery designed to last about three years under normal use.

Beyond the Jeep Renegade, this TPMS sensor is also compatible with several other Chrysler, Dodge, Fiat, and Jeep models from specific production years, making it a versatile replacement part. Whether you are replacing a damaged sensor or upgrading an older one, this unit provides accurate pressure readings and helps you avoid under-inflated tires that can lead to poor handling or uneven wear.

Each sensor comes in a standard package and is backed by a one-year replacement warranty. If you have any questions after receiving the item, the seller is available to assist you promptly. Simply install the sensor, let the auto-relearn process complete, and you will have a properly functioning tire pressure monitoring system again.

Key Features and Benefits

- 433MHz frequency that provides reliable wireless communication with your vehicle's TPMS system

• Auto-relearn function that eliminates the need for manual programming tools or dealer visits

• Snap-in installation method that makes replacing the sensor quick and simple

• Pre-programmed for Jeep Renegade 2017-2023 and other compatible Chrysler, Dodge, Fiat, and Jeep models

• Battery life of about three years under normal driving conditions for long-term reliability

• One-year replacement warranty that protects your purchase and gives you added confidence

Who Is This For

- Jeep Renegade owners with model years 2017 through 2023 who need a direct replacement TPMS sensor

• Drivers who want to restore their tire pressure monitoring system after a sensor failure or battery depletion

• Car owners who prefer a plug-and-play solution with auto-relearn instead of complicated programming

• Anyone looking for a cost-effective alternative to dealership-priced TPMS sensors without sacrificing compatibility

Usage Scenario

Mark noticed his Jeep Renegade's tire pressure warning light stayed on even after checking all four tires. A quick scan at his local shop confirmed the front left TPMS sensor had failed. Instead of paying dealership prices, Mark ordered this 433MHz replacement sensor. He installed it himself in under 15 minutes using a simple valve stem tool. After a short drive, the auto-relearn function synced the new sensor, and the warning light turned off. Now Mark drives with confidence knowing his tire pressure is monitored accurately again.

Micro Comparison

Some generic TPMS sensors require a separate programming tool or a trip to a tire shop to activate. This sensor is pre-programmed for your specific vehicle and uses an auto-relearn process, so it syncs automatically after installation. It matches the original part numbers 68313387AB and 68313387AC, which means it is designed to fit and function just like the factory sensor. You get a reliable replacement without the extra hassle or cost.

Specifications

Frequency: 433MHz

Interchange Part Number: 68313387AB, 68313387AC

Installation Method: Snap-in

Activation: Auto-relearn

Battery Life: About 3 years

Warranty: 1 year replacement

Package Includes

- 1 x TPMS tire pressure sensor

Why You Will Love It

You will love how easy it is to get your tire pressure monitoring system working again without expensive dealer visits. The auto-relearn feature saves you time and eliminates the guesswork. Plus, the one-year warranty gives you peace of mind that your investment is protected. Drive safer and more efficiently with a sensor that simply works.

Questions and Answers

Question: Does this TPMS sensor work for a 2019 Jeep Renegade?

Answer: Yes, this sensor is compatible with Jeep Renegade models from 2017 to 2023, including the 2019 model year.

Question: Do I need a special tool to program this sensor?

Answer: No, the sensor uses an auto-relearn function. Once installed, your vehicle will recognize it automatically without additional programming.

Question: What is the frequency of this tire pressure sensor?

Answer: The sensor operates at 433MHz, which is the standard frequency for many Chrysler, Dodge, Fiat, and Jeep vehicles.

Question: How long does the battery last in this TPMS sensor?

Answer: The battery is designed to last about three years under normal driving conditions.

Question: What other vehicles besides the Jeep Renegade can use this sensor?

Answer: This sensor also fits Chrysler Voyager (2019-2020), Dodge Durango (2017-2024), Fiat 500X (2017-2023), Jeep Compass (2018-2024), and Jeep Grand Cherokee (2016-2021) within specific production date ranges.

Keep your tire valves secure and your pressure checks quick with these plastic valve caps. Each cap includes a built-in valve core remover, so you can tighten or replace valve stems without needing a separate tool. Made from durable plastic with a weather-resistant design, these caps protect your valve stems from dirt and moisture while providing a reliable seal.

These universal stem covers fit a wide range of vehicles, including cars, SUVs, trucks, motorcycles, and bicycles. The ergonomic grip makes them easy to tighten by hand, and the built-in rubber O-ring helps prevent air leaks. Choose from multiple colors to add a personal touch to your tires while keeping them protected.

Key Features and Benefits

- Built-in valve core remover on top provides a convenient tool for adjusting valve stems without extra equipment

• Rubber O-ring creates an airtight seal that helps prevent air leakage during long drives

• Ergonomic grips on each cap make it easy to tighten and remove by hand, even in tight spaces

• Heavy-duty plastic construction offers weather-resistant durability against rain, dust, and road debris

• Universal compatibility fits cars, SUVs, trucks, motorcycles, and bicycles for versatile use

Who Is This For

- Car and truck owners who want a simple way to protect valve stems and check tire pressure on the go

• Motorcycle and bicycle riders looking for lightweight, secure valve covers that resist vibration and weather

• DIY mechanics who appreciate having a valve core tool built into every cap for quick adjustments

• Drivers who want to add a splash of color to their tires while maintaining functional valve protection

Usage Scenario

You are about to head out on a long road trip. As you check your tire pressure, you notice one valve stem is slightly loose. Instead of searching for a separate tool, you simply unscrew the valve cap, use the built-in core remover to tighten the stem, and screw the cap back on. The rubber O-ring ensures a snug seal, so you can drive with confidence knowing your tires are properly inflated and protected.

Micro Comparison

Standard plastic valve caps only cover the stem and offer no tool functionality. These caps go a step further by integrating a valve core remover into the design, so you can perform quick adjustments without carrying extra tools. The added rubber O-ring also provides a more reliable seal than basic caps, reducing the chance of slow leaks over time.

Specifications

Material: Plastic

Color: Black, Blue, Red, Yellow, Green, Orange

Size: 1.6 x 0.79 cm / 0.62 x 0.31 inch

Quantity: 4, 10, 30, or 50 pieces (select your preferred quantity)

Package Includes

- 4, 10, 30, or 50 plastic valve caps with built-in valve core remover (quantity based on your selection)

Why You Will Love It

You will appreciate the convenience of having a valve core tool always attached to your tire valve. No more digging through your glove box for a separate tool when you need to adjust a stem. The colorful design also makes it easy to spot your valves at a glance, and the durable plastic construction means they will hold up through all seasons.

Questions and Answers

Question: Do these valve caps fit all standard tire valves?

Answer: Yes, they are designed to fit standard Schrader valves found on most cars, trucks, motorcycles, and bicycles.

Question: Can I use these caps on my bicycle?

Answer: Yes, they work on standard bicycle tire valves that use Schrader-style stems.

Question: Will the built-in valve core remover damage the valve stem?

Answer: No, the remover is designed to fit standard valve cores and allows for gentle tightening or removal without causing damage.

Question: How do I choose the right quantity?

Answer: Select from 4, 10, 30, or 50 pieces based on how many valves you need to cover or if you want extras for multiple vehicles.

Question: Are these caps weather-resistant?

Answer: Yes, the plastic construction is heavy-duty and weather-resistant, protecting valve stems from rain, dust, and road debris.

Keep your tire pressure in check with this set of four TPMS sensors designed for Opel Astra K and other compatible models. These 433MHz sensors come pre-programmed for your vehicle, so no sensor programming is required. They are a direct replacement for part numbers 13506028, 13540602, 13540603, and others.

Each sensor is 100% new and built for a perfect fit. The sensors need to be activated using a scan tool or by following a relearn procedure. A trigger tool is needed for the simplified relearn process. To ensure a smooth installation, we recommend having this done by a trained professional.

This set replaces your old or failing TPMS sensors, helping you maintain optimal tire pressure. Proper tire pressure improves fuel efficiency, extends tire life, and enhances overall driving safety. The sensors have a battery life of about three years, giving you long-term peace of mind.

Before ordering, please double-check the product pictures, your vehicle's VIN code, and the part numbers to ensure compatibility. If you are unsure, send us a product picture or your part number before placing your order.

Key Features and Benefits

- Pre-programmed sensors that require no programming for a simple, direct installation.

• 433MHz frequency ensures a stable and reliable wireless connection with your vehicle's TPMS system.

• 100% brand new and strictly tested before shipment for dependable performance.

• Battery life of approximately three years for long-lasting use.

• Each parcel is carefully packaged to prevent damage during transit.

Who Is This For

- Opel Astra K owners (2015-09 to 2019-07) needing a direct replacement TPMS sensor set.

• Drivers of compatible Opel models like the Corsa E, Insignia, and Mokka looking for a reliable sensor upgrade.

• Vauxhall Astra MK VII owners (2015-10 to 2022-04) seeking a simple, pre-programmed solution.

• Chevrolet Volt owners (2017-08 to 2019-08) who need a 433MHz sensor replacement.

Usage Scenario

Mark noticed his Opel Astra K's tire pressure warning light was flickering on and off. After checking the tires, he realized the TPMS sensors were likely failing. He ordered this set of four pre-programmed sensors. A local mechanic installed them in under an hour and performed the quick relearn procedure. Now, Mark's dash shows accurate tire pressure readings, giving him confidence on his daily commute.

Micro Comparison

Unlike generic sensors that require complex programming, this set comes pre-programmed for your specific make and model. This saves you time and reduces the chance of installation errors. While some options may require a dealership visit, these sensors offer a straightforward solution for a professional installer.

Specifications

Part Numbers: 13540602, 13540603, 13506028, 13589601, 13522629, 13598773, 13516165

Frequency: 433MHz

Battery Life: Approximately 3 Years

Package Includes

- 4 x TPMS (Tire Pressure Monitoring Sensor)

Why You Will Love It

You will love the simple, no-programming-needed setup that gets your TPMS system working again. Driving with accurate tire pressure readings gives you better control and safety on the road. This set offers a reliable, long-lasting solution for your Opel or compatible vehicle.

Questions and Answers

Question: Do these sensors need to be programmed before installation?

Answer: No, they come pre-programmed for your specific vehicle make and model.

Question: What is the required relearn procedure for these sensors?

Answer: A simplified relearn process is required, and a trigger tool is needed to complete it.

Question: Can I install these TPMS sensors myself?

Answer: We recommend installation by a trained professional to ensure proper fit and function.

Question: How long does the battery last in these sensors?

Answer: The battery life is approximately three years under normal driving conditions.

Question: What should I do if I am not sure these sensors fit my car?

Answer: Please check your VIN code and part numbers against the listed models before ordering. Contact us with a picture or part number if you need help confirming compatibility.

Give your tires a clean, upgraded look with these aluminum valve stem caps. Made from durable alloy with a built-in rubber O-ring, each cap helps seal out dirt, moisture, and road grime while protecting the valve from corrosion. A simple screw-on replacement for standard plastic caps, this 4-pack fits most vehicles including cars, trucks, motorcycles, and bicycles.

These valve stem caps are crafted from 100% aluminum alloy material that resists rust and fading over time. The integrated rubber sealing ring provides a tight fit to help prevent air leaks, supporting stable tire pressure during everyday driving or longer trips. Each cap replaces the original black plastic cover directly, adding a subtle metallic accent to your wheels.

Installation takes just seconds. Remove the existing plastic cap from each tire valve and screw on the aluminum cap by hand. The universal thread pattern fits standard valve stems found on most passenger vehicles, SUVs, motorcycles, and bicycles. This set includes four caps, enough for a full set of tires on a car or truck.

Beyond function, these caps add a touch of style to your vehicle. The metallic finish stands out against black rubber and plastic, giving your wheels a more finished appearance. They also make a practical gift for car enthusiasts, bike riders, or anyone who wants to protect their tire valves without spending much.

Key Features and Benefits

- Aluminum alloy construction that resists rust and fading for long-lasting use

• Built-in rubber O-ring that helps seal the valve and reduce the risk of air leaks

• Universal thread pattern that fits most cars, trucks, SUVs, motorcycles, and bicycles

• Easy screw-on installation that takes seconds and requires no tools

• Set of 4 caps that covers all tires on a standard vehicle

Who Is This For

- Drivers who want to replace worn or missing plastic valve caps with something more durable

• Motorcycle and bicycle owners looking for a simple upgrade that protects valve stems from dirt and moisture

• Car enthusiasts who appreciate small details like metal accents on wheels

• Anyone who wants a quick, low-cost way to add a cleaner look to their tires

Usage Scenario

Mark noticed his car's original plastic valve caps were cracked and letting in dust. After a few weeks, one tire was losing pressure more often. He swapped in these aluminum caps during a quick stop at the gas station. The metal covers screwed on easily and fit snugly. Over the next month, his tire pressure stayed steady, and the caps still looked as new as the day he installed them. No more worrying about dirt clogging the valve or air seeping out slowly.

Micro Comparison

Standard plastic valve caps are cheap but can crack, fade, or loosen over time. These aluminum caps use a metal shell with a rubber O-ring for a more secure seal. The alloy material also resists corrosion from road salt, rain, and snow, making them a longer-lasting choice than basic plastic covers. If you want a simple upgrade that protects your valve stems and adds a touch of style, this set delivers without a big investment.

Specifications

- Material: Aluminum alloy + rubber O-ring seal

• Color: As shown

• Quantity: 4 caps per set

Package Includes

- 4 x Tire air valve caps

Why You Will Love It

These valve stem caps are a small change that makes a noticeable difference. They protect your tire valves from dirt and moisture, help maintain stable air pressure, and give your wheels a cleaner, more finished look. With a simple screw-on installation and a set of four included, upgrading your vehicle takes less than a minute.

Questions and Answers

Question: Will these fit my car's tire valves?

Answer: Yes, these caps have a standard thread that fits most cars, trucks, SUVs, motorcycles, and bicycles.

Question: Do these caps prevent air from leaking out?

Answer: The built-in rubber O-ring helps create a tighter seal, which reduces the chance of slow air leaks compared to basic plastic caps.

Question: Are these caps made of metal or plastic?

Answer: They are made of aluminum alloy, a durable metal that resists rust and fading.

Question: How do I install them?

Answer: Simply unscrew your old plastic valve cap and screw on the aluminum cap by hand. No tools are needed.

Question: Will these caps rust over time?

Answer: The aluminum alloy material is designed to resist rust and corrosion, even in wet or snowy conditions.

Question: Can I use these on a bicycle?

Answer: Yes, they fit standard bicycle tire valves as well as car and motorcycle valves.

Question: Do these caps come with anything to prevent them from fusing to the valve stem?

Answer: The caps do not include grease. It is recommended to apply a small amount of grease to the threads before installation to help prevent fusion.

Keep your tires at the right pressure with this set of four pre-programmed TPMS sensors. Designed for select Toyota models from 2019 and up, these 433MHz sensors replace part numbers PMV-E100, 42607-02100, and 42607-02090. They come ready to install, with no programming needed before installation.

Driving with properly inflated tires improves fuel economy, extends tire life, and gives you better control on the road. This TPMS sensor set helps you monitor tire pressure in real time, so you can catch slow leaks or pressure drops before they become a problem. Each sensor is 100% brand new and factory tested before shipping.

Installation is straightforward for a trained professional. The sensors come pre-programmed for your vehicle's make and model, so you just need to activate them using a scan tool or perform a relearn procedure with an OBDII tool. Once installed, the sensors communicate wirelessly with your car's onboard system to display pressure readings on your dashboard.

Battery life is rated at about 3 to 5 years, giving you long-term reliability without frequent replacements. This set includes four sensors, one for each tire, so you get complete coverage for your vehicle.

Key Features and Benefits

- Pre-programmed for select Toyota models that eliminates the need for manual programming before installation

• 433MHz operating frequency that ensures reliable wireless communication with your vehicle's TPMS system

• Factory tested before shipping that reduces the risk of receiving a defective sensor

• Battery life of 3 to 5 years that provides long-lasting performance without frequent replacements

• Compatible with OBDII relearn tools that makes the activation process quick and simple for professionals

• Replaces multiple OEM part numbers including PMV-E100, 42607-02100, and 42607-02090 that simplifies replacement for a wide range of Toyota models

Who Is This For

- Toyota Avalon owners (US and CN models from 2020 and up) looking for a direct replacement TPMS sensor set

• Toyota Camry owners (CN models from 2020 and up) who need to replace worn or faulty tire pressure sensors

• Toyota 4Runner owners (US and CN models from 2020 and up) wanting to maintain proper tire pressure monitoring

• Toyota Corolla owners (US and CN models from 2019 and up) or Toyota Levin/Hybrid owners (2019 and up) in need of new sensors

Usage Scenario

Mark noticed his Toyota Camry's dashboard tire pressure warning light flickering on cold mornings. He checked the pressure manually and found the front left tire was consistently 5 PSI low. After replacing all four original sensors with this pre-programmed set, his TPMS system displayed accurate readings again. Now he can see pressure changes immediately on his dashboard, and he no longer worries about hidden leaks during long highway drives.

Micro Comparison

Some aftermarket TPMS sensors require manual programming with a dedicated tool before installation, which adds time and complexity. This set comes pre-programmed for your specific Toyota model, so your installer can activate them with a standard scan tool or OBDII relearn procedure. The sensors are 100% new and factory tested, giving you confidence that they will work correctly right out of the box.

Specifications

Material: 42607-12020 42607-02070 4260712020 4260702070

Operating Frequency: 433MHZ

Part Numbers: PMV-E100 42607-02100 42607-02090 PMVE100 4260702100 4260702090 42607-12020 42607-02070 4260712020 4260702070

Battery Life: About 3 to 5 Years

Condition: 100% Brand New

Package Includes

- 4 x Tire Pressure Monitor Sensor

Why You Will Love It

You will enjoy peace of mind knowing your tire pressure is monitored accurately every time you drive. This set saves you the hassle of programming sensors yourself, so installation is faster and easier for your mechanic. With a battery life spanning several years, you can install them and forget about them until it is time for replacement.

Questions and Answers

Question: How do I know if these sensors fit my car?

Answer: Check your vehicle's make, model, and year against the application list. Also verify your OEM part number matches one of the listed numbers like PMV-E100 or 42607-02100.

Question: Do I need to program these sensors before installing them?

Answer: No, they come pre-programmed for your vehicle. You only need to activate them using a scan tool or perform a relearn procedure with an OBDII tool.

Question: Can I install these sensors myself?

Answer: Installation is recommended to be performed only by trained professionals. They have the tools to mount, balance, and activate the sensors correctly.

Question: What should I do before installing the sensors on my car?

Answer: Ask your installer to scan the sensors first. This confirms their frequency, tire pressure reading, and battery status before mounting, which avoids unnecessary installation fees.

Question: How long does the battery last in these sensors?

Answer: The battery life is about 3 to 5 years, depending on driving conditions and usage.

Question: What if the sensors do not work after installation?

Answer: Contact us with your order details. We are available to help and will work with you to resolve any issues.

Add safety and style to your ride with these LED valve stem cap lights. They screw onto your tire valve stem and light up automatically when you move, making your wheels visible at night or in bad weather. No wiring or tools needed.

These tire valve cap lights are built from durable PVC and aluminum with a bright silver body. Each cap uses three LR1130 batteries (not included) to power a bright LED that turns on when the vehicle is moving and shuts off when stopped. Choose from blue, green, red, or yellow LED colors to match your style.

Installation takes seconds. Just remove your existing valve cap and screw on the LED cap. The universal fit works on bikes, motorcycles, cars, and trucks. The motion-activated light helps announce your presence to others on the road, especially at night or in fog, rain, or low-light conditions.

Each cap measures 6.1 cm / 2.5 inches in length and 2.5 cm / 1.25 inches in diameter. The compact bar-type design sits flush against the wheel and does not interfere with riding or driving.

Key Features and Benefits

- Motion-activated LED that turns on while moving and off when stopped, saving battery life

• Universal screw-on design that fits most bike, motorcycle, car, and truck valve stems without tools

• Bright silver PVC and aluminum body that resists wear and matches any wheel finish

• Four LED color options (blue, green, red, yellow) to personalize your vehicle look

• Compact bar-type shape that stays visible from the side without adding bulk

Who Is This For

- Cyclists who want extra visibility during night rides or commutes

• Motorcycle riders looking for a simple safety upgrade without wiring

• Car owners who want to add a subtle custom touch to their wheels

• Truck or SUV drivers who drive in low-light or bad weather conditions

Usage Scenario

Mark commutes home after sunset on his bicycle. He used to worry about drivers not seeing him at intersections. After screwing these LED valve caps onto his tires, the bright lights turn on as soon as he starts pedaling. Now drivers notice him from the side, and he feels more confident riding in the dark.

Micro Comparison

Unlike stick-on wheel lights that require adhesive and may fall off, these valve cap lights screw directly onto the existing valve stem for a secure fit. They also do not need batteries as often as always-on lights because the motion sensor keeps them off when parked. This design gives you useful side visibility without complex installation.

Specifications

Material: PVC and Aluminum

Length: 6.1 cm / 2.5 inches

Diameter: 2.5 cm / 1.25 inches

Battery: 3 x LR1130 (not included)

LED Colors Available: Blue, Green, Red, Yellow

Placement: Front, Rear, Lower

Please allow 1-3 cm / 0.4-1.2 inches difference due to manual measurement.

Package Includes

- 1 x LED Light Wheel Valve Cap

Why You Will Love It

These caps turn a basic part of your wheel into a useful safety feature. The motion-activated light works automatically so you do not have to remember to turn anything on. It is a small upgrade that makes a real difference in how visible you are to others on the road.

Questions and Answers

Question: Do these fit standard car tire valves?

Answer: Yes, they fit most standard valve stems on cars, bikes, motorcycles, and trucks.

Question: How do the lights turn on and off?

Answer: The light is motion-activated. It turns on when the wheel is moving and turns off when the vehicle stops.

Question: What batteries do these use?

Answer: Each cap uses three LR1130 button cell batteries. Batteries are not included in the package.

Question: Are these waterproof for riding in the rain?

Answer: They are designed for outdoor use and can handle rain and wet roads during normal riding conditions.

Question: Do I need any tools to install them?

Answer: No tools are needed. Just unscrew your old valve cap and screw on the LED cap by hand.

Question: Will the light drain the battery if I leave my car parked for days?

Answer: No, the motion sensor keeps the light off when the vehicle is not moving, so the battery lasts much longer than always-on lights.

Keep your tires at the right pressure with a direct-fit TPMS sensor designed for Volkswagen, Audi, Porsche, Skoda, and other compatible models. This 433MHz sensor replaces part number 5Q0907275 and comes pre-programmed for your specific vehicle, so you can install it without complex coding.

This tire pressure sensor helps you monitor air pressure in real time, reducing the risk of uneven tire wear, poor fuel economy, or dangerous blowouts. It is built to match factory specifications and works seamlessly with your vehicle's existing TPMS system.

Installation is straightforward for a trained professional. The sensor needs to be activated using a scan tool or through a relearn procedure after mounting. With a battery life of about three years, you get reliable performance without frequent replacements.

Designed for a wide range of VAG group vehicles, this sensor is a practical replacement for worn or faulty units. It restores the safety and convenience of your factory tire pressure monitoring system.

Key Features and Benefits

- Pre-programmed for your vehicle that simplifies installation and avoids the need for manual programming

• 433MHz operating frequency that ensures reliable communication with your car's TPMS receiver

• Battery life of about three years that provides long-term, maintenance-free operation

• Direct replacement for part number 5Q0907275 that guarantees a proper fit without adapters

• Compatible with a wide range of VW, Audi, Porsche, Skoda, and Bentley models that covers many popular vehicles

Who Is This For

- Drivers of 2019-2024 Volkswagen Tiguan Allspace who need a factory-style replacement sensor

• Audi, Porsche, and Skoda owners looking for a direct-fit TPMS sensor for their compatible model

• Car owners who want to restore their tire pressure monitoring system after a sensor failure or battery drain

• Mechanics and DIY installers who prefer a pre-programmed sensor to save time during replacement

Usage Scenario

Mark noticed his Volkswagen Tiguan Allspace dashboard light for low tire pressure kept flashing even after checking all four tires. A quick scan at his local garage confirmed one of the TPMS sensors had failed. Instead of paying a premium at the dealership, he ordered this pre-programmed replacement. After mounting the new sensor and performing a short relearn procedure with a scan tool, the warning light turned off and his tire pressure readings returned to normal.

Micro Comparison

Some universal TPMS sensors require manual programming and may not sync properly with your car's system. This sensor comes pre-programmed for your specific make, model, and year, so you can install it without coding. It matches the original part number 5Q0907275 for a reliable, hassle-free replacement.

Specifications

- Operating Frequency: 433MHz

• Battery Life: About 3 years

• Replaces Part Number: 5Q0907275

Package Includes

- 1 x TPMS Tire Pressure Sensor

Why You Will Love It

You get a sensor that fits your car perfectly without extra programming steps. It restores your factory TPMS function quickly, keeping you informed about tire health. A long battery life means you can install it and forget about it for years.

Questions and Answers

Question: Does this sensor work with my 2021 Audi Q5?

Answer: Yes, this sensor is compatible with many Audi models including the Q5 (FY) from 2016-09 to 2022-07. Please check the full application list to confirm your specific year.

Question: Do I need to program this sensor before installation?

Answer: No, the sensor comes pre-programmed for your vehicle. You only need to activate it using a scan tool or perform a relearn procedure after mounting.

Question: What is the battery life of this TPMS sensor?

Answer: The battery lasts about three years under normal driving conditions.

Question: Can I install this sensor myself?

Answer: Installation requires dismounting the tire and mounting the sensor to the rim. It is recommended to have a trained professional perform the installation.

Question: Will this sensor work with my 2019 Skoda Octavia?

Answer: Yes, this sensor is compatible with the Skoda Octavia (from 2013-02 to 2019-11). It should work with your vehicle.

Protect your tire valves from dirt, moisture, and corrosion with these durable aluminum alloy valve caps. Designed as a simple upgrade for plastic caps, they help maintain stable tire pressure while adding a touch of style to your wheels.

These metal valve caps are built to last. Made from aluminum alloy, they resist rust and wear far better than standard plastic caps. Each cap includes a built-in high-quality sealing ring that helps prevent air leaks, so your tires stay properly inflated for longer.

Installation takes seconds. Just screw each cap onto your existing tire valve. No tools are needed, and the universal fit works on cars, motorcycles, bicycles, and more. Choose from four colors to match or accent your vehicle's look.

Dust and moisture are the main enemies of tire valve cores. These caps create a tight seal that keeps out clay, water, snow, and road grime. That means less risk of valve corrosion and more consistent tire pressure over time.

Key Features and Benefits

- Aluminum alloy construction that resists rust and corrosion for long-lasting use

• Built-in sealing ring that helps prevent air leakage from the valve

• Dust-proof design that protects the valve core from moisture, dirt, and snow

• Universal fit that works on cars, motorcycles, bicycles, and other vehicles with standard valves

• Multiple color options to personalize and decorate your wheels

• Easy screw-on installation that takes seconds and requires no tools

Who Is This For

- Car owners looking for a simple way to upgrade from standard plastic valve caps

• Drivers who want to keep tire pressure stable by preventing valve leaks

• Anyone who wants to add a subtle color accent to their wheels for personalization

• Owners of SsangYong models like Musso, Korando, Rexton, Torres, Kyron, Actyon, Tivoli, Rodius, M200, Chairman Sport, and Xlv

Usage Scenario

Mark noticed his plastic valve caps were cracked after a winter of road salt and freezing temperatures. He swapped them for these aluminum alloy caps in just a few minutes. Now his tire valves stay sealed and clean, and the red caps give his black wheels a sporty accent that gets compliments at the car meet.

Micro Comparison

Standard plastic valve caps can crack, loosen, and let moisture reach the valve core over time. These metal caps use a threaded aluminum body and a built-in sealing ring to create a more reliable barrier against air loss and corrosion. The result is a simple upgrade that protects your tire valves without adding complexity.

Specifications

- Material: Aluminum alloy

• Color options: Black, Silver, Red, Blue

• Size: As shown in the picture

• Package: Foam

• Suitable car models: Universal for all cars

Package Includes

- 4 x Metal tire valve caps (set of 4)

Why You Will Love It

These valve caps give you a durable metal upgrade that protects your tire valves from the elements. The easy screw-on installation means you can replace worn plastic caps in seconds. And with four colors to choose from, you can add a personal touch to your ride without spending much.

Questions and Answers

Question: Will these fit my car?

Answer: Yes, these valve caps have a universal fit and work on most cars, motorcycles, bicycles, and other vehicles with standard tire valves.

Question: Do these caps prevent air leaks?

Answer: They have a built-in sealing ring that helps reduce air leakage from the valve, but they are not a replacement for a damaged valve core.

Question: What colors are available?

Answer: The caps come in Black, Silver, Red, and Blue.

Question: Are these better than plastic valve caps?

Answer: Yes, aluminum alloy is more durable and resistant to cracking, rust, and weather damage compared to standard plastic caps.

Question: How do I install them?

Answer: Simply unscrew your old valve caps and screw these on by hand. No tools are needed.

Question: Are these compatible with tire pressure monitoring systems?

Answer: They work with most standard valve stems, but you should check clearance with your specific TPMS sensors if they are mounted on the valve.

Keep your truck, RV, or bus tires under constant watch with this solar-powered tire pressure monitoring system. It tracks pressure and temperature for up to six tires simultaneously, sending real-time alerts for dangerous changes like rapid leaks, high heat, or low battery. The wireless sensors install easily, and the LCD display wakes automatically when you start driving.

This TPMS is built for heavy vehicles where tire safety is critical. The solar-powered receiver stays charged without extra wiring, and the system monitors pressure up to 9.9 bar and temperatures from -40°C to 120°C. When something goes wrong, you get both a flashing alarm on the display and an audible buzzer so you can react fast and avoid blowouts or tire damage on the road.

Installation is straightforward. The sensors and receiver come pre-paired from the factory, so you only need to mount the sensors on your tire valves and place the receiver on your dashboard. The system automatically enters sleep mode after 10 minutes of parking to save power and wakes up when it detects vibration once you start moving again.

For fleet managers, RV owners, or truck drivers, this TPMS gives you peace of mind. Instead of guessing tire health, you get accurate, real-time data for each tire position. The alarm system covers low pressure, high pressure, rapid leakage, high temperature, and low sensor battery, so you can address issues before they become emergencies on the highway.

Key Features and Benefits

- Solar-powered receiver that charges automatically and eliminates the need for constant battery replacement or hardwiring

• Real-time monitoring of tire pressure and temperature for six tires simultaneously, helping you catch problems early

• Audible and visual alarms for low pressure, high pressure, rapid air leak, high temperature, and low sensor battery

• Wireless connection with interior or external sensors, making installation quick and tool-free

• Automatic wake and sleep mode that conserves battery when parked and activates when driving begins

• LCD digital display that clearly shows pressure and temperature readings for each tire position

Who Is This For

- Truck drivers who need constant tire monitoring for safety and fuel efficiency on long hauls

• RV owners who want to avoid tire blowouts and maintain stable pressure during extended trips

• Bus operators and fleet managers looking for a reliable, low-maintenance TPMS to protect their vehicles and passengers

• Anyone driving a heavy vehicle that requires six-tire monitoring and prefers a solar-powered, wireless system

Usage Scenario

Mark drives a Class A RV across the country for work. Last year, he had a rear tire blowout on a remote highway, which cost him a full day and a repair bill. Since installing this TPMS, he checks the display before each drive and gets an instant alert when a tire started losing pressure slowly. He pulled over, added air, and avoided another blowout. Now he drives with confidence, knowing the system watches his tires even when he is focused on the road.

Micro Comparison

Unlike basic tire pressure gauges that only give you a reading at a single moment, this TPMS monitors all six tires continuously and alerts you to changes while you drive. Many aftermarket systems require hardwiring or frequent battery changes, but this one uses solar power and automatic sleep to stay hassle-free. The pre-paired sensors also save you the trouble of manual pairing.

Specifications

Material: ABS + aluminum

Working Frequency: 433.9200MHz ± 0.1Mhz

Temperature Monitoring Range: -40°C to +120°C (-40°F to +248°F)

Pressure Monitoring Range: Maximum 9.9 bar (143.6 psi)

Precision: Temperature ±2°C / ±3.6°F; Pressure ±0.1 bar / ±1.45 psi

Types: Interior sensors or external sensors

Package Includes

- 1 set Car Tyre Pressure Monitoring System (includes receiver and 6 sensors)

Why You Will Love It

You get a full tire safety system that works without constant attention. The solar receiver keeps itself powered, the sensors report accurate data, and the alarms wake you up to problems before they become roadside emergencies. It is a simple, reliable way to protect your vehicle, your cargo, and your passengers.

Questions and Answers

Question: How do I install the sensors on my truck tires?

Answer: Mount the sensors onto your tire valve stems. They connect wirelessly to the receiver, so no tools or wiring are needed for the sensor installation.

Question: Does the receiver need to be plugged into a power outlet?

Answer: No. The receiver is solar-powered and charges automatically when exposed to light. It does not require a separate power cable.

Question: Will the system work on a trailer or fifth wheel?

Answer: Yes. The TPMS supports up to six tires, so it can monitor a truck and trailer combination or a single vehicle with six wheels.

Question: How do I know if a tire has a problem while I am driving?

Answer: The display shows a flashing alarm symbol for the affected tire, and the buzzer sounds continuously. You can press any button to silence the buzzer, but the alarm icon stays on until the issue is resolved.

Question: What happens if a sensor battery runs low?

Answer: The display flashes the low battery symbol for that sensor, and the buzzer alerts you. You can then replace the sensor battery as needed.

These aluminum grenade-style tire valve caps add a rugged look to your car, truck, or bike while keeping your tire valves sealed from dust and debris. Made from durable aluminum alloy, they are designed to fit standard tire valve stems for a secure and tight connection.

Give your vehicle a subtle custom touch with these machined valve stem covers. The grenade shape stands out without being flashy, and the aluminum construction resists corrosion better than standard plastic caps. Each set includes four caps, enough for a full set of car or truck tires.

Installation is simple. Just remove your existing valve caps and screw these on by hand until snug. No tools are needed. The internal threading is designed for a tight fit on standard tire valve stems, helping to prevent air leaks and keep your valves clean.

These caps come in multiple color options so you can match your vehicle's style or add a small accent. The aluminum alloy material is lightweight yet tough, and the CNC machining ensures a precise fit and a clean finish.

Key Features and Benefits

- Aluminum alloy construction that resists rust and corrosion for long-lasting use

• Grenade-style design that adds a unique look to your tires without being oversized

• Standard fit for most car, truck, SUV, and bike tire valve stems for easy installation

• Multiple color choices that let you personalize your vehicle's appearance

• CNC machined for a precise thread fit that helps keep dust and dirt out

Who Is This For

- Car owners who want a simple visual upgrade for their wheels

• Truck and SUV drivers looking for durable valve caps that can handle rough conditions

• Motorcycle and bike riders who want a smaller, lightweight option for their tire valves

• Anyone replacing lost or cracked plastic valve caps with a metal alternative

Usage Scenario

Mark noticed his old plastic valve caps were cracked and letting dust into the valve stems. He swapped them out for these aluminum grenade caps in about two minutes. Now his truck's tires look cleaner, and he does not worry about dirt getting into the valves during off-road trips.

Micro Comparison

Standard plastic valve caps can crack or loosen over time, especially in hot weather or rough driving conditions. These aluminum alloy caps are more durable and resist corrosion better than most plastic or chrome-plated options. The grenade shape gives a subtle custom look without being overly flashy, making them a practical upgrade for everyday drivers.

Specifications

Material: aluminum alloy

Color: black, red, blue, silver, gold, green

Product name: grenades

Package Includes

- 4 x Tire valve caps

Why You Will Love It

These caps give your vehicle a small custom touch without a big investment. The aluminum build feels solid in your hand and holds up better than plastic. With six color options, you can match your car's style or add a subtle accent that stands out just enough.

Questions and Answers

Question: Will these fit my car's tire valves?

Answer: Yes, they fit standard tire valve stems found on most cars, trucks, SUVs, and bikes.

Question: Do these caps prevent air from leaking out?

Answer: They help seal the valve opening against dust and debris, but they are not designed to fix existing valve leaks.

Question: How do I install them?

Answer: Simply unscrew your old valve caps and screw these on by hand until tight. No tools required.

Question: Are these caps heavy?

Answer: No, they are made from lightweight aluminum alloy, so they will not unbalance your tires.

Question: Do they come in a set of four?

Answer: Yes, each package includes four caps, enough for a full set of car or truck tires.

Keep your tire pressure in check with this reliable 433MHz TPMS sensor. Designed as a direct replacement for a wide range of Lexus and Toyota models, it helps you maintain safe driving conditions by monitoring tire pressure in real time. This sensor comes pre-programmed for your specific vehicle, so no complex setup is required before installation.

This sensor is a 100% new unit that matches OEM part numbers 42607-50010, 42607-50011, and PMV-107K. It is built with a durable PCBA board and battery to provide long-lasting performance. The sensor needs to be activated with a scan tool after installation, and you will need an OBDII tool to complete the relearn process.

Driving with properly inflated tires improves fuel efficiency, extends tire life, and enhances overall vehicle safety. This TPMS sensor gives you the peace of mind that comes from knowing your tire pressure is being monitored accurately every time you drive.

Key Features and Benefits

- Pre-programmed for your vehicle that eliminates the need for manual programming before installation

• 433MHz frequency that ensures reliable wireless communication with your car's TPMS system

• Direct replacement design that fits multiple Lexus and Toyota models for broad compatibility

• 100% new PCBA board and battery that delivers dependable long-term performance

• Simplified relearn process using an OBDII tool that makes activation straightforward

Who Is This For

- Owners of Lexus ES, GS, IS C, or LS models from 2005 to 2013 looking for a direct replacement sensor

• Toyota Camry, Prius, RAV4 III, or Land Cruiser drivers needing a pre-programmed TPMS sensor

• DIY mechanics who have access to a scan tool and OBDII relearn tool for installation

• Anyone replacing a faulty or dead TPMS sensor to restore proper tire pressure monitoring

Usage Scenario

Mark noticed his Toyota Camry's low tire pressure light was staying on even after inflating the tires. After checking for leaks, he found one of the original TPMS sensors had failed. He ordered this pre-programmed replacement, installed it at home, and used his OBDII scanner to complete the relearn process. The warning light turned off, and he could finally trust his tire pressure readings again.

Micro Comparison

Unlike generic universal sensors that require complex programming and may not sync properly with your vehicle, this TPMS sensor is pre-programmed specifically for your Lexus or Toyota model. It matches the OEM part numbers exactly, so you get a direct fit without guessing or modifying anything. The simplified relearn process with an OBDII tool also saves you time compared to older sensors that need multiple steps to activate.

Specifications

Material: PCBA board and battery

Model Number: PMV-107K 42607-50010 42607-50011

OEM Number: PMV-107K

Frequency: 433MHz

Package Includes

- 1 or 4 TPMS Tire Pressure Sensor(s) (depending on selected quantity)

Why You Will Love It

You will appreciate how easy it is to restore your vehicle's tire pressure monitoring system with this pre-programmed sensor. No complicated programming steps are needed, and the direct fit means you can get back on the road with confidence. It is a simple, cost-effective solution that helps you drive safer and more efficiently.

Questions and Answers

Question: Does this sensor come pre-programmed for my car?

Answer: Yes, the sensor is 100% new and pre-programmed specifically for your vehicle's make, model, and year. You do not need to program it before installation.

Question: Do I need any special tools to install this TPMS sensor?

Answer: Yes, you will need a scan tool to activate the sensor and an OBDII tool to complete the relearn process after installation.

Question: Will this sensor work on my 2008 Toyota RAV4?

Answer: Yes, this sensor is compatible with the Toyota RAV4 III from 2005-11 to 2013-01, which includes the 2008 model year.

Question: How do I know if this is the right part for my Lexus GS?

Answer: Please check the part number on your old sensor. If it matches 42607-50010, 42607-50011, or PMV-107K, this sensor will be a direct replacement.

Question: Can I install this sensor myself, or should I go to a professional?

Answer: Installation is recommended to be performed only by trained professionals, but experienced DIY users with the right tools can also do it.

Keep your tire pressure in check with this set of four 433MHz TPMS sensors. Designed as a direct replacement for the OEM part number 5Q0907275F, these sensors help you monitor tire pressure in real time, reducing the risk of blowouts and improving fuel efficiency. They come pre-programmed for a wide range of Audi, Volkswagen, Porsche, Bentley, and McLaren models, making installation straightforward for a trained professional.

These sensors use a PCBA board and battery construction for stable and sensitive readings. They are 100% brand new and do not require any sensor programming for your specific vehicle. A simplified relearn process using an OBDII tool is needed after installation to activate them. This set of four sensors offers a practical, high-quality aftermarket solution for maintaining your vehicle's tire pressure monitoring system.

Key Features and Benefits

- Pre-programmed for your vehicle that eliminates the need for complex sensor programming

• 433MHz frequency that ensures reliable and consistent signal transmission to your car's system

• PCBA board and battery construction that provides durable and stable performance over time

• Direct OEM replacement design that fits perfectly with the 5Q0907275F part number specification

• Simplified relearn process using an OBDII tool that makes activation quick for a professional installer

• Set of four sensors that gives you a complete replacement kit for all wheels

Who Is This For

- Audi owners with models like A3, A4, A5, A6, A7, Q5, Q7, Q8, R8, TT, and RS7 produced between 2007 and 2025

• Volkswagen drivers with Passat, Golf, Tiguan, Touareg, Jetta, Polo, Arteon, or Transporter models from 2003 to 2026

• Porsche enthusiasts with 911, Cayenne, Cayman, Macan, or Panamera models from 2013 to 2024

• Owners of Bentley Bentayga, McLaren Super Series GT, and Skoda Karoq, Kodiaq, Octavia, and Superb models

Usage Scenario

Mark noticed his Audi Q5's tire pressure warning light flickering on his morning commute. After a quick check, he found one tire was slightly low. Instead of guessing, he replaced all four old sensors with this 433MHz set. After a professional installation and a quick OBDII relearn, his dashboard now shows accurate pressure readings for every tire, giving him confidence on the highway and saving him from potential tire wear issues.

Micro Comparison

Unlike universal sensors that require complex programming and may not sync correctly with your car's computer, these sensors are pre-programmed for your specific vehicle make and model. They match the OEM 5Q0907275F specification, ensuring a direct fit and reliable communication with your car's TPMS system without the need for additional configuration tools.

Specifications

Material: PCBA board and battery

Model Number: 5Q0907275F

OEM Number: 275F

Frequency: 433MHz

Package Includes

- 4 x TPMS Tire Pressure Sensor

Why You Will Love It

Driving with accurate tire pressure gives you peace of mind and helps you avoid unexpected roadside stops. These sensors are a practical upgrade that keeps your vehicle's safety systems working as intended. You will appreciate the straightforward replacement process and the confidence that comes from knowing your tires are properly monitored.

Questions and Answers

Question: Do I need to program these sensors myself?

Answer: No, these sensors come pre-programmed for your specific vehicle make and model. You only need to perform a relearn process using an OBDII tool after installation.

Question: What vehicles are these sensors compatible with?

Answer: They are compatible with a wide range of Audi, Volkswagen, Porsche, Bentley, McLaren, and Skoda models. Please check the full list of applicable models above to confirm your vehicle is included.

Question: How do I activate the sensors after installation?

Answer: After installation, you need to use an OBDII tool to perform a simplified relearn process. This activates the sensors and syncs them with your vehicle's TPMS system.

Question: Are these sensors a direct replacement for the original ones?

Answer: Yes, they are designed as a direct replacement for the OEM part number 5Q0907275F. Please confirm your original part number matches before purchasing.

Question: Can I install these sensors myself?

Answer: Installation of TPMS sensors is recommended to be performed only by trained professionals to ensure proper fit and function.

Question: What is the warranty on these sensors?

Answer: These sensors are 100% brand new and made with high-quality materials. For specific warranty details, please contact the seller directly.

Give your Peugeot a subtle custom look with these logo-embossed tyre valve caps. Made from lightweight aluminum alloy, they replace your standard plastic caps to add a touch of style while keeping your valve stems clean and protected.

Each cap is precision-machined to fit standard car and motorcycle tyre valves. The set includes four caps, one for each wheel, so your entire vehicle gets a coordinated upgrade. No tools are needed for installation, just screw them on by hand.

The aluminum alloy construction resists rust and corrosion, making these caps a durable choice for daily driving in various weather conditions. The Peugeot logo is engraved on each cap for a clean, factory-inspired appearance.

Available in Black, Red, Silver, or Blue, you can match the caps to your car's color or add a subtle accent. They also help prevent dirt and moisture from entering the valve, which can cause slow leaks over time.

Key Features and Benefits

- Aluminum alloy material that resists rust and corrosion for long-lasting use

• Embossed Peugeot logo adds a personalized touch to your wheels

• Universal fit for standard tyre valves on cars and motorcycles

• Easy hand-tight installation with no tools required

• Helps keep dirt and water out of the valve stem to prevent potential leaks

• Lightweight design that won't affect wheel balance

Who Is This For

- Peugeot owners who want to add a small custom detail to their vehicle

• Drivers looking for durable metal valve caps as a replacement for worn plastic ones

• Anyone who wants to protect their tyre valves from dirt and moisture

• Peugeot enthusiasts who appreciate subtle brand-matched accessories

Usage Scenario

David noticed the plastic valve caps on his Peugeot 308 were starting to look faded and cracked. He wanted something that would last longer and match his car's look. After swapping in these aluminum alloy caps with the Peugeot logo, his wheels had a cleaner, more finished appearance. The caps screwed on easily and stayed tight even after a long highway drive. No more worrying about dirt getting into the valve or caps falling off at the car wash.

Micro Comparison

Standard plastic valve caps are often generic and can become brittle over time, leading to cracks or lost caps. These aluminum alloy caps offer better durability and a customized look with the Peugeot logo. They are also more resistant to weather and road debris, making them a practical upgrade for everyday use.

Specifications

- Material: Aluminum alloy

• Color: Black / Red / Silver / Blue

• Fit: Universal for standard car and motorcycle tyre valves

• Quantity: 4 pieces per set

Package Includes

- 4 x Peugeot Logo Tyre Valve Caps

Why You Will Love It

These valve caps are a small but noticeable way to personalize your Peugeot. They are built to last, easy to install, and help keep your valves clean. Plus, the logo adds a touch of brand pride every time you walk up to your car.

Questions and Answers

Question: Will these fit my Peugeot 208?

Answer: Yes, these caps fit standard tyre valves used on all Peugeot models listed, including the 208.

Question: Do these caps require any special tools to install?

Answer: No, you just screw them on by hand. No tools are needed.

Question: Are these caps weather resistant?

Answer: Yes, the aluminum alloy material resists rust and corrosion, making them suitable for outdoor use in various weather conditions.

Question: Can I use these on a motorcycle?

Answer: Yes, they fit standard motorcycle tyre valves as well, since the valve size is the same.

Question: How do I choose the right color?

Answer: The caps come in Black, Red, Silver, and Blue. Pick the one that best matches your car's color or adds a subtle accent you like.

Keep your Mercedes-Benz tires at the right pressure with this set of four TPMS sensors. Designed as a direct replacement for part number A0009050030, each sensor comes pre-programmed for your specific vehicle model and year. This system helps you monitor tire pressure in real time, improving safety and fuel efficiency.

These sensors operate at a frequency of 433MHz and are built to last with a battery life of about three years. They are a direct fit for a wide range of Mercedes-Benz models, including the A-Class, C-Class, E-Class, GLC, GLE, and many more. The set includes four sensors, one for each tire, so you can replace all of them at once.

Installation requires a professional tire service to mount the sensors and a re-learning procedure using an OBDII scan tool or a TPMS trigger tool. No sensor programming is needed because the units are already configured for your car. This makes the replacement process straightforward for a qualified technician.

Driving with properly inflated tires reduces the risk of blowouts and uneven wear. These TPMS sensors give you the peace of mind that comes from knowing your tire pressure is always within the recommended range.

Key Features and Benefits

- Pre-programmed for your specific Mercedes-Benz model that saves you time and eliminates the need for complex programming

• 433MHz operating frequency that ensures reliable communication with your vehicle's onboard TPMS system

• Battery life of about three years that provides long-lasting performance before replacement is needed

• Direct replacement for OEM part number A0009050030 that guarantees a perfect fit and compatibility

• Set of four sensors that allows you to replace all tire sensors at once for consistent monitoring

Who Is This For

- Mercedes-Benz owners who need to replace a faulty or dead TPMS sensor in their vehicle

• Drivers who want to improve tire safety and fuel economy by maintaining correct tire pressure

• Car enthusiasts who prefer to have a complete set of pre-programmed sensors ready for installation

• Workshops and mechanics looking for reliable, direct-fit TPMS sensors for a wide range of Mercedes models

Usage Scenario

Mark noticed the TPMS warning light on his Mercedes-Benz E-Class dashboard was staying on. After checking the tire pressures manually, he realized one of the sensors had failed. He ordered this set of four pre-programmed sensors and took them to his local tire shop. The technician installed them in under an hour, performed the re-learning procedure with an OBDII tool, and the warning light turned off. Mark now drives with confidence knowing his tire pressure is being monitored correctly.

Micro Comparison

Unlike universal TPMS sensors that require manual programming with a special tool, these sensors come pre-programmed for your specific Mercedes-Benz model. This saves you the extra step and potential for error. They are a direct replacement for the factory part, so you get the same fit and performance without any guesswork.

Specifications

- Material: tire pressure sensor A0009050030

• Model Number: tpms sensor A0009050030

• OEM NO.: 670002790 A0009050030

• Battery Life: about 3 years

• Operating Frequency: 433MHz

Package Includes

- 4 x TPMS Tire Pressure Monitor Sensors

Why You Will Love It

You will love the convenience of having pre-programmed sensors that are ready to install. No complicated setup means less hassle and more time on the road. With a battery life of about three years, you can rely on these sensors to keep your tire pressure in check for many miles to come.

Questions and Answers

Question: Do these sensors need to be programmed before installation?

Answer: No, they come pre-programmed for your specific Mercedes-Benz model and year. You only need to activate them using a scan tool or perform a re-learning procedure.

Question: What is the operating frequency of these sensors?

Answer: They operate at 433MHz, which is the standard frequency for many Mercedes-Benz TPMS systems.

Question: How long does the battery last in these sensors?

Answer: The battery life is about three years under normal driving conditions.

Question: Are these sensors compatible with my Mercedes-Benz GLC?

Answer: Yes, they are compatible with the GLC (X253) from 2015-06 to 2020-06, as well as many other models. Please check the application list for your specific vehicle.

Question: Do I need any special tools to install these sensors?

Answer: Installation requires a tire changer and torque wrench. A TPMS trigger tool or OBDII scan tool is needed for the re-learning procedure. Professional installation is recommended.

Keep your tires at the right pressure with this 433MHz TPMS sensor. It is a direct replacement for many Infiniti and Nissan models. The sensor has been pre-programmed for your vehicle, so no complex setup is needed. Just activate it with a scan tool or a simple relearn procedure.

This sensor uses a PCBA board and battery for reliable operation. It monitors tire pressure in real time. This helps you avoid uneven tire wear and improve fuel economy. The 433MHz frequency ensures a strong and stable signal to your car's onboard system.

Built to meet OE specifications, this sensor fits your car like the original part. The installation is straightforward for a trained professional. With this TPMS sensor, you get peace of mind on every drive.

Key Features and Benefits

- Pre-programmed for your vehicle that requires no sensor programming, just a relearn procedure for easy installation

• 433MHz frequency that provides a stable and reliable signal to your car's TPMS system

• Direct replacement design that fits your vehicle's original mounting location for a seamless swap

• Real-time tire pressure monitoring that helps you maintain optimal tire pressure for better safety and fuel efficiency

Who Is This For

- Infiniti Q70, QX50, QX70, and QX80 owners needing a TPMS replacement

• Nissan GT-R, Juke, Leaf, and Patrol VI drivers looking for a direct-fit sensor

• Mercedes-Benz X-Class owners who need a compatible 433MHz sensor

• Renault Alaskan owners seeking a reliable tire pressure monitoring solution

Usage Scenario

Mark noticed his Nissan GT-R's tire pressure warning light was on. He checked the tires but they looked fine. After a quick visit to his mechanic, he learned one of his TPMS sensors had failed. He ordered this replacement sensor. The mechanic installed it in minutes and performed a simple relearn. Now Mark's tire pressure warning light is off, and he has peace of mind knowing his tires are properly monitored.

Micro Comparison

This sensor is pre-programmed for your specific make and model. Some generic sensors require you to clone them from your old ones. This sensor works with a simple relearn procedure using an OBDII tool. It is a straightforward replacement that gets you back on the road quickly.

Specifications

- Material: PCBA board and battery

• Model Number: 40700-5ZH0A PMV-CA74

• OEM Number: 40700-5ZH0A PMV-CA74

• Frequency: 433MHz

Package Includes

- 1 or 4 Tire Pressure Sensors (depending on your selection)

Why You Will Love It

This TPMS sensor gives you a direct replacement that works without complicated programming. You get the confidence of knowing your tire pressure is always monitored. It is a simple fix for a common issue that helps keep your driving safe and efficient.

Questions and Answers

Question: Does this sensor need to be programmed before installation?

Answer: No, the sensor has been pre-programmed for your vehicle. You only need to activate it with a scan tool or perform a "re-learning" procedure.

Question: What vehicles is this sensor compatible with?

Answer: It is compatible with many Infiniti models (Q70, QX50, QX70, QX80) and Nissan models (GT-R, Juke, Leaf, Patrol VI) as well as some Mercedes-Benz X-Class and Renault Alaskan models.

Question: How do I install this TPMS sensor?

Answer: Installation is recommended to be performed by a trained professional. After installation, you need to use an OBDII tool to perform a simplified relearn procedure.

Question: What is the frequency of this sensor?

Answer: This sensor operates at 433MHz.

Question: How do I know if this sensor will fit my car?

Answer: Please confirm the OE number (part number) before purchase. Check if our product matches your original product. If you are unsure, contact us before ordering.

Replace your faulty tire pressure sensors with a set of four 433MHz TPMS sensors designed for a wide range of BMW and Mercedes-Benz models. These sensors come pre-programmed with the correct frequency for a direct fit, helping you restore your vehicle's tire pressure monitoring system without the need for complex programming.

Maintaining proper tire pressure is key to safe driving and fuel efficiency. These TPMS sensors provide accurate, real-time pressure readings to your vehicle's onboard computer, alerting you to any changes that need attention. The sensors are built to be durable and responsive, ensuring you stay informed on the road.

Each sensor is a direct replacement part, matching the specifications of your original equipment. They are designed for a straightforward installation process, though professional fitting is recommended to ensure the best results. Once installed, a simple relearn procedure using an OBDII tool will sync the sensors with your car's system.

This set covers a vast number of popular BMW and Mercedes-Benz models from recent years. Whether you drive a BMW 3 Series (G20), a Mercedes-Benz E-Class (W213), or a GLE Coupe (C167), these sensors are a reliable choice for maintaining your vehicle's safety systems.

Key Features and Benefits

- 433MHz Frequency that matches the OEM specification for reliable communication with your vehicle.

• Pre-Programmed Design that eliminates the need for manual programming, simplifying the installation process.

• Direct Fit Replacement that matches the original part numbers and form factor for a seamless install.

• Durable Construction that provides stable and sensitive readings for consistent performance over time.

• Comprehensive Vehicle Coverage that supports a wide range of BMW and Mercedes-Benz models from the last decade.

Who Is This For

- BMW owners with models like the G30 5 Series, G20 3 Series, or G11 7 Series needing a TPMS replacement.

• Mercedes-Benz drivers with models such as the W213 E-Class, W463 G-Class, or C167 GLE Coupe.

• DIY mechanics and car enthusiasts who want a pre-programmed sensor for an easier installation.

• Workshop technicians looking for a reliable, high-quality aftermarket sensor for customer vehicles.

Usage Scenario

David noticed a low tire pressure warning light on his 2019 BMW X5 (G05) dashboard. After checking the tire pressure manually and finding it correct, he knew the sensor was failing. He ordered this set of four sensors, took his car to a trusted mechanic, and had them installed. After a quick OBDII relearn, the warning light was gone, and his TPMS system was back to providing accurate pressure readings for all four tires.

Micro Comparison

While some universal sensors require a complex programming step before installation, these sensors come pre-programmed for the 433MHz frequency used by your vehicle. This saves you time and reduces the chance of setup errors. They are a direct-fit alternative to the expensive OEM parts, offering the same essential function at a more accessible price point.

Specifications

- Material: Electronic product

• Frequency: 433MHz

• Compatible OE Numbers: A0009054104, 36106872803, 36106877937, 36106872774, 36106876955, 6887147, and more

Package Includes

- 4 x TPMS Tire Pressure Sensor

Keep your tire pressure monitoring system working reliably with this direct replacement TPMS sensor. Designed to fit a wide range of GM vehicles including Chevrolet, GMC, Cadillac, and Buick models, this sensor operates at 315MHz and comes pre-programmed for a straightforward installation process. It is a direct fit for many model years, helping you maintain proper tire pressure monitoring without the need for complex programming.

This TPMS sensor is built with a PCBA board and battery, ensuring accurate pressure readings for your vehicle's safety system. The sensor is 100% new and is pre-programmed for your specific vehicle's make, model, and year. This simplifies the replacement process, as the sensor is ready to be activated using a scan tool or a TPMS "re-learning" procedure. An OBDII tool is required for the relearn process.

Whether you are replacing a faulty sensor or upgrading your entire set, this product offers a reliable solution. It comes in a 1-pack or 4-pack option, allowing you to replace individual sensors or all four at once. If you are unsure about the correct part number for your vehicle, it is recommended to verify the OE number before purchase to ensure a perfect fit.

Key Features and Benefits

- Pre-programmed for your vehicle that simplifies installation and eliminates the need for sensor programming.

• 315MHz frequency that ensures compatibility with many GM vehicle TPMS systems.

• PCBA board and battery construction that provides accurate and reliable tire pressure readings.

• Compatible with a wide range of Chevrolet, GMC, Cadillac, Buick, and other GM models that covers many popular vehicles.

• Available in a 1-pack or 4-pack that lets you replace only the sensors you need.

• OEM replacement part numbers 13586335, 22853741, 25799331, and 25920615 that ensures a direct fit for your vehicle.

Who Is This For

- Vehicle owners with a Chevrolet, GMC, Cadillac, Buick, or other compatible GM model needing a TPMS sensor replacement.

• Drivers who want a pre-programmed sensor for a simpler, more direct installation process.

• Anyone looking to replace one or more faulty tire pressure sensors to restore the TPMS warning light functionality.

• Car owners who prefer to have a spare TPMS sensor on hand for future replacement needs.

Usage Scenario

Mark noticed the TPMS warning light on his 2010 Chevrolet Silverado's dashboard was staying on, even after checking and inflating all four tires. After a quick inspection, he found that one of the original sensors had failed. He ordered this GANGLE TPMS sensor, and it arrived pre-programmed for his truck. He took it to his local tire shop, where they installed it and performed a TPMS relearn using an OBDII tool. The warning light turned off, and Mark now has peace of mind knowing his tire pressure is being monitored accurately again.

Micro Comparison

Unlike some aftermarket sensors that require manual programming with a cloning tool, this sensor comes pre-programmed for your specific vehicle. This saves you time and effort during installation. It is a direct replacement for multiple OEM part numbers, making it a versatile and convenient choice for a wide range of GM vehicles.

Specifications

Material: PCBA board and battery

Frequency: 315 MHz

OEM Part Numbers: 13586335, 22853741, 25799331, 25920615

Matching Requirements: EL-50448 or OBD tool

Package Includes

1/4 x TPMS tire pressure sensor

Why You Will Love It

This TPMS sensor offers a hassle-free replacement experience with its pre-programmed design. It restores your vehicle's critical tire pressure monitoring system, helping you drive with confidence. The wide compatibility with many GM models makes it a smart and versatile choice for your maintenance needs.

Questions and Answers

Question: Do I need to program this sensor myself?

Answer: No, the sensor comes pre-programmed for your specific vehicle's make, model, and year. You only need to activate it using a scan tool or a TPMS relearn procedure.

Question: What is the frequency of this sensor?

Answer: This sensor operates at 315 MHz.

Question: Will this sensor fit my 2008 GMC Yukon?

Answer: Yes, this sensor is compatible with the GMC Yukon from 2006 to 2014. Please double-check your vehicle's specific model year and your original part number to be sure.

Question: How do I activate the sensor after installation?

Answer: You will need to perform a TPMS relearn procedure using an OBDII tool or a compatible scan tool like the EL-50448.

Question: Can I replace just one sensor or do I need to replace all four?

Answer: You can replace just one sensor, as this product is available in a 1-pack. If you prefer, you can also purchase a 4-pack to replace all sensors at once.

Check your tire safety at home with this digital tread depth gauge. It measures from 0 to 25.4 mm with 0.01 mm accuracy, helping you know exactly when to replace your tires for safer driving.

This tire wear detection tool gives you precise readings so you can avoid guesswork. The clear digital display shows the depth of your tire grooves, letting you compare them against standard wear limits. It is a simple way to keep your car maintenance routine on track.

Made from durable ABS plastic, this gauge is lightweight at about 40 g and easy to handle. The measuring rod slides smoothly into tire grooves for quick checks on all four tires. It works for summer tires, winter tires, and all-season tyres, making it a versatile addition to your auto care kit.

Using the gauge is straightforward. Turn it on, zero it on a flat surface, then insert the rod into the tire groove to read the depth. For best results, measure several spots on the same tire and take the average. This gives you a reliable picture of tread wear without any complicated steps.

Key Features and Benefits

- Digital display that shows readings down to 0.01 mm for precise tire wear checks

• ABS plastic body that is lightweight and durable for regular use

• Measuring range from 0 to 25.4 mm to cover all common tire tread depths

• Simple push-button operation with a zero reset function for accurate measurements

• Helps you identify when tires reach the 1.6 mm legal wear limit or recommended replacement depths for summer and winter tires

Who Is This For

- Car owners who want to check tire tread at home without visiting a mechanic

• DIY auto enthusiasts who maintain their own vehicles and need a reliable measurement tool

• Fleet managers or drivers who perform regular tire inspections on multiple vehicles

• Anyone preparing for long road trips who wants to verify tire condition before driving

Usage Scenario

Mike noticed his car felt less stable on wet roads. Instead of guessing, he grabbed his digital tread depth gauge. He measured the front tires in three different spots and took the average. The reading showed 2.8 mm, below the 3 mm recommended replacement for summer tires. He replaced them the next day and felt the difference in grip during the next rain.

Micro Comparison

Unlike visual-only tread wear indicators or simple coin tests, this digital gauge gives you an exact number. It removes the guesswork from tire inspections. You get a clear measurement you can compare directly to manufacturer or legal guidelines, helping you make informed decisions about tire replacement.

Specifications

Product range: 0 to 25.4 mm

Difference: plus or minus 0.1 mm

Material: ABS plastic

Net product amount: about 40 g

Product accuracy: 0.01 mm

Package Includes

1 x Digital tire tread depth gauge

Battery not included

Why You Will Love It

You get peace of mind knowing your tires are safe for every drive. This gauge turns a simple check into an accurate measurement, so you never have to wonder if your tread is too low. It is a small tool that makes a big difference in your car maintenance routine.

Questions and Answers

Question: How do I use this tire tread depth gauge?

Answer: Press the power button to turn it on. Place it on a flat surface, push the measuring rod to the end, and press zero to reset. Then insert the rod into the tire groove to read the depth.

Question: What is the measurement range of this gauge?

Answer: It measures from 0 to 25.4 mm with an accuracy of 0.01 mm.

Question: What material is the gauge made from?

Answer: It is made from ABS plastic and weighs about 40 g.

Question: Does this gauge come with a battery?

Answer: No, the battery is not included. You will need to supply your own battery.

Question: How do I know when my tires need replacement based on tread depth?

Answer: The legal wear limit is 1.6 mm. For summer tires, replacement is recommended at 3 mm. For winter tires, replacement is recommended at 4 mm.

Question: Should I measure just one spot on the tire?

Answer: It is recommended to measure several different areas on the same tire and take the average for a more accurate result.

Give your Haval SUV or crossover a quick style upgrade with a set of 3D metal tire valve caps. These aluminum alloy dust covers replace your standard plastic caps, adding a custom look while protecting your tire valves from dirt, moisture, and road debris. Made from durable aluminum alloy with a plated finish, they are built to last through all seasons.

Each cap features a high quality sealing ring inside to help maintain proper tire pressure by keeping the valve core clean and dry. The 3D design and available colors let you personalize your wheels without a big investment. Installation is simple, just screw them on by hand.

These valve caps are specifically designed to fit a wide range of Great Wall Haval models including the H1, H2S, H3, H4, H5, H6, H7, H8, H9, F5, F7, F7X, H6 Coupe, M6, Jolion, and First-love M4. Whether you drive a compact crossover or a full size SUV, you get a secure fit and a clean look.

Key Features and Benefits

- Aluminum alloy construction that resists rust and corrosion, keeping your valve caps looking new longer

• Built in sealing ring that helps prevent air leaks and flat tires, giving you peace of mind on the road

• Dust proof design that protects the valve core from clay, water, and snow, helping maintain stable tire pressure

• Easy to install without tools, simply replace your old plastic caps in seconds

• Available in red, black, or silver to match your vehicle style and add a personal touch

Who Is This For

- Haval owners who want to replace worn or missing plastic valve caps with a more durable metal option

• Drivers looking for a simple and affordable way to personalize their wheels with a splash of color

• Anyone who wants extra protection for their tire valves against dust, snow, and road grime

Usage Scenario

Mark noticed his Haval H6 was missing two of its original plastic valve caps after a long road trip. He ordered this set of 4 metal caps in silver to match his wheels. Within minutes, he screwed them on by hand and liked how the 3D design gave the tires a cleaner, more finished appearance. On his next drive through rainy weather, he felt confident the sealing ring was keeping dirt and moisture out of the valve.

Micro Comparison

Plastic valve caps can crack, fade, or fall off over time. These aluminum alloy caps are more durable and come with a sealing ring that helps prevent air loss. The 3D plated finish also gives your wheels a more polished look compared to basic plastic covers.

Specifications

Material: Aluminum alloy

Process: Plating

Weight: 20 g / 0.7 oz

Color options: Red, black, silver

Size: A 1.5 x 1 cm / 0.6 x 0.4 in, B 1.2 x 0.9 cm / 0.5 x 0.4 in, C 1.6 x 0.9 cm / 0.6 x 0.4 in, D 1.8 x 0.9 cm / 0.7 x 0.4 in

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 set (4 pieces) of metal tire valve caps

Why You Will Love It

These valve caps give your Haval a custom touch without a big expense. The metal build feels solid and the sealing ring adds practical protection. It is a small change that makes your wheels look better and your drive a little more secure.

Questions and Answers

Question: Will these fit my Haval H6 Coupe?

Answer: Yes, these valve caps are designed to fit Haval H6 Coupe and many other Haval models including H1, H2S, M6, H3, H4, H5, H7, H8, F5, F7, F7X, H2, F7, H9, First-love M4, and Jolion.

Question: Are these caps easy to install?

Answer: Yes, installation is very simple. Just remove your old plastic caps and screw these metal caps on by hand. No tools are needed.

Question: What colors are available?

Answer: The caps come in three color options: red, black, and silver.

Question: Do these caps help prevent air leaks?

Answer: Yes, each cap has a high quality sealing ring inside that helps prevent air leaks and keeps the valve core protected from dirt and moisture.

Question: Are these caps made of metal?

Answer: Yes, they are made from aluminum alloy with a plated finish, which is more durable than standard plastic caps.

Upgrade your vehicle's tire valves with a set of four universal aluminum alloy valve stems. These tubeless tire valve stems are built for durability and a clean, professional look. They are a simple and effective replacement for old, worn-out rubber valves on cars and motorcycles.

Each valve stem is made from high-quality aluminum alloy. The manufacturing process includes turning, milling, and surface treatment to ensure a smooth, corrosion-resistant finish. The brass valve core adds to the overall reliability and longevity of the product. These valve stems are designed to be explosion-proof and can withstand high temperatures, making them a sturdy choice for daily driving.

Installing these valve stems is straightforward. They come in a set of four, allowing you to replace all the valves on your vehicle at once. The sleek design in your choice of black, silver, or gray adds a subtle, upgraded aesthetic to your wheels. These are a preferred accessory for vehicle manufacturing, repair, and home car maintenance.

Key Features and Benefits

- Aluminum alloy construction that is sturdy, durable, and corrosion-resistant for long-lasting use.

• Brass valve core that provides a reliable seal and consistent air pressure retention.

• Explosion-proof and high-temperature resistant design for safety and performance under various driving conditions.

• Universal fit for tubeless tires on cars and motorcycles, making them a versatile replacement part.

• Easy to install, allowing you to quickly upgrade your tire valves without special tools.

Who Is This For

- Car owners looking to replace old, cracked, or leaking rubber tire valves.

• Motorcycle riders wanting a more durable and stylish valve stem option.

• DIY mechanics and home garage enthusiasts who prefer to handle their own vehicle maintenance.

• Anyone performing a full tire service or wheel upgrade and needing new valve stems.

Usage Scenario

Mark noticed his car's tire pressure was dropping slowly in one wheel. He checked and found the old rubber valve stem was cracked. Instead of a trip to the shop, he ordered this set of aluminum alloy valve stems. In just a few minutes, he replaced all four valve stems himself. The new stems looked great, held pressure perfectly, and gave him confidence for his next long drive.

Micro Comparison

While standard rubber valve stems can dry out and crack over time, these aluminum alloy valve stems offer a more robust and longer-lasting solution. The brass valve core provides a more consistent seal compared to some all-metal designs. This set gives you the durability of metal without the complexity of a tire pressure monitoring system (TPMS) sensor, making it a straightforward and reliable upgrade.

Specifications

Material: Aluminum alloy with brass valve core

Color: Blue / Silver / Dark Grey

Product size: 45 x 16 x 16mm / 1.77 x 0.63 x 0.63 in

Gross weight: 60g

Quantity: 4pcs

Package Includes

- 4 x Aluminum Alloy Tire Valve Stems

Why You Will Love It

You will love the peace of mind that comes with a simple, durable upgrade. These valve stems offer a clean, professional look that complements your wheels. You will appreciate the straightforward installation and the reliable performance that keeps your tires properly inflated for a smoother, safer ride.

Questions and Answers

Question: Are these valve stems for tubeless tires only?

Answer: Yes, these are specifically designed for tubeless tires on cars and motorcycles.

Question: What is the thread size of these valve stems?

Answer: They are a standard universal size, commonly referred to as a TR413 or TR414 style thread, fitting most standard rims.

Question: Do these come with the valve core installed?

Answer: Yes, each valve stem comes with the brass valve core already installed.

Question: What color options are available?

Answer: The set is available in Blue, Silver, and Dark Grey.

Question: Will these fit my motorcycle?

Answer: Yes, they are designed for universal fit on both cars and motorcycles with tubeless tires.

Give your vehicle a quick style upgrade while keeping your tire valves clean and protected. These universal cross-shaped valve caps fit most cars, trucks, SUVs, motorcycles, and bikes.

Each cap is lightweight and easy to install by hand. No tools are needed. Simply screw them onto your existing valve stems for an instant look that stands out. The cross design adds a unique touch to your wheels.

Beyond looks, these caps help keep dirt, dust, and moisture away from the valve core. This simple protection can help prevent air leaks and extend the life of your tires. They work well on mountain bikes, road bikes, folding bikes, and more.

Whether you drive a truck, ride a motorcycle, or pedal a bike, these valve caps are a small upgrade that makes a difference. They are made to fit standard Schrader valves, which are common on most vehicles.

Key Features and Benefits

- Cross-shaped design that gives your wheels a distinctive and attractive look

• Lightweight build that is easy to carry and store when not in use

• Tool-free installation that lets you swap them in seconds

• Helps prevent air leakage by blocking dirt and rain water from the valve

• Universal fit for cars, trucks, SUVs, motorcycles, and bicycles

Who Is This For

- Car owners who want a simple way to personalize their wheels

• Truck and SUV drivers looking for durable valve protection

• Motorcycle and bike riders who ride in dusty or wet conditions

• Anyone who wants to keep tire valves clean and reduce the risk of slow leaks

Usage Scenario

Mike noticed his mountain bike tires lost air faster after muddy trail rides. He swapped his old plastic caps for these cross-shaped metal ones. The tight seal kept mud and water out, and his tires held pressure longer. The unique look also drew compliments from his riding group.

Micro Comparison

Basic plastic valve caps often crack or let moisture in over time. These cross-shaped caps use a sturdier build and a tighter fit to keep debris out. The distinctive design also makes them easier to spot and harder to lose compared to plain round caps.

Package Includes

- 4 x Cross Tire Valve Caps

Why You Will Love It

These valve caps add a custom touch to your vehicle without a big investment. They protect your tires from common valve issues while making your wheels look more polished. A small change that brings both function and style.

Questions and Answers

Question: Will these fit my car's tire valves?

Answer: Yes, they fit standard Schrader valves found on most cars, trucks, SUVs, motorcycles, and bicycles.

Question: Do I need any tools to install them?

Answer: No. Simply screw them onto the valve stem by hand. No tools required.

Question: Are these caps metal or plastic?

Answer: The source description does not specify the material. They are lightweight and durable.

Question: Can they prevent air from leaking out of the tire?

Answer: They help block dirt and moisture from entering the valve, which can reduce the chance of slow air leaks caused by debris.

Question: How many caps come in one set?

Answer: Each set includes 4 caps.

Question: Will these fit a motorcycle?

Answer: Yes, as long as the motorcycle uses standard Schrader valves, they will fit.

Replace your faulty Ford tire pressure sensors with these direct-fit EV6T-1A180-CB and EV6T-1A150-CB TPMS units. Designed for a wide range of Ford vehicles including B-Max, C-Max, Mondeo, Kuga, Focus, and Fiesta, these 433MHz sensors help you maintain proper tire pressure and improve driving safety.

These tire pressure monitoring sensors are built to match the original equipment specifications for your Ford. They work with your vehicle's existing TPMS system to provide real-time tire pressure data. When your tires are properly inflated, you get better fuel economy, longer tire life, and a smoother ride. Installing a full set of four sensors ensures all wheels are monitored consistently.

Each sensor is designed for easy installation. Simply replace your old sensor with this compatible unit and follow the standard TPMS relearn procedure for your Ford model. The sensors transmit pressure and temperature data to your dashboard display, alerting you if pressure drops below safe levels. This gives you peace of mind on every trip, whether you are commuting to work or taking a long road trip.

To avoid ordering the wrong part, always check the reference part number on your original sensor body. Compare the OE number with your vehicle's requirements before purchasing. These sensors are intended for Ford models produced between 2010 and 2022, depending on the specific model and year. If the part number does not match your sensor, do not buy this item.

Key Features and Benefits

- Direct replacement design that fits your Ford's original TPMS system without modifications

• 433MHz frequency that communicates reliably with your vehicle's onboard receiver

• Compatible with multiple Ford models including B-Max, C-Max, Mondeo, Kuga, Focus, Fiesta, and more

• Helps maintain correct tire pressure for improved fuel efficiency and extended tire tread life

• Provides real-time pressure alerts to help you avoid dangerous low-pressure driving conditions

Who Is This For

- Ford owners with a TPMS warning light on the dashboard who need to replace faulty sensors

• Drivers of Ford B-Max, C-Max, Mondeo, Kuga, Focus, Fiesta, and other listed models from 2010 onward

• Car enthusiasts looking for a cost-effective replacement for original equipment sensors

• Mechanics or DIY owners performing routine tire pressure sensor maintenance

Usage Scenario

Mike noticed his Ford Kuga's TPMS light stayed on even after inflating his tires. After checking the system, he found two of his original sensors had failed. He ordered this set of four EV6T-1A180-CB compatible sensors. After installing them and performing the relearn procedure, the warning light turned off. Now his dashboard shows accurate tire pressure readings again, and he feels more confident driving his family on highways and back roads.

Micro Comparison

Generic TPMS sensors often require complex programming or may not sync properly with Ford systems. These EV6T-1A180-CB and EV6T-1A150-CB sensors are designed specifically for Ford compatibility, so they work with your vehicle's original TPMS protocol. They offer a reliable alternative to expensive dealer replacements while maintaining the same 433MHz frequency and fitment standards.

Specifications

Model Number: EV6T-1A180-CB, EV6T-1A150-CB

OEM Number: EV6T-1A180-CB

Frequency: 433MHz

Compatible Ford Models: B-Max (2014-06 to 2018-12), C-Max (2014-03 to 2014-12), C-MAX (2014-03 to EOP), Ecosport (2014-10 to EOP), Escape (2014-03 to 2015-12), Expedition (2017-04 to EOP), Explorer (2017-04 to 2022-03), F-150 (2014-03 to 2015-12), F-150 (2015-03 to EOP), Fiesta (2014-05 to 2015-12), Fiesta (2016-01 to EOP), Fiesta Van (2014-03 to 2015-12), Fiesta Van (2014-06 to 2017-12), Focus (2010-12 to 2017-03), Focus (2014-03 to 2018-12), F-Series (2014-03 to 2016-12), F-Series (2015-01 to 2020-12), Ka+ (2016-01 to EOP), Kuga (2012-11 to 2019-09), Kuga (2014-10 to 2021-09), Mondeo (2014-10 to 2017-08), Ranger (2014-06 to EOP), Tourneo Connect (2014-03 to EOP), Tourneo Courier (2014-10 to EOP), Transit (2014-06 to 2014-12), Transit (2014-06 to 2015-12), Transit Connect (2014-03 to EOP), Transit Courier (2014-10 to EOP)

Package Includes

- 4x TPMS Tire Pressure Monitoring Sensors

Why You Will Love It

You will appreciate how easily these sensors restore your TPMS system to full function. No more guessing if your tires are properly inflated. You get the safety of real-time pressure monitoring without paying dealership prices. It is a straightforward fix that keeps your Ford running at its best.

Questions and Answers

Question: Will these sensors work with my 2015 Ford Fiesta?

Answer: Yes, they are compatible with Ford Fiesta models from 2014-05 to 2015-12 and also from 2016-01 to EOP.

Question: Do I need to program these sensors before installation?

Answer: These sensors are designed to be compatible with Ford's TPMS system. After installation, you will need to perform the standard TPMS relearn procedure for your specific Ford model.

Question: What is the frequency of these TPMS sensors?

Answer: They operate at 433MHz.

Question: How many sensors come in this package?

Answer: The package includes 4 sensors, enough to replace all four wheel positions.

Question: Will these fit a 2018 Ford Focus?

Answer: Yes, they are compatible with Ford Focus models from 2014-03 to 2018-12.

Add a bright glow to your car or motorcycle with these fluorescent yellow tire valve caps. They charge in sunlight and glow at night, making your wheels easy to spot in the dark.

These valve caps are made from lightweight ABS plastic and feature a bright fluorescent yellow color. They charge under sunlight and emit a visible glow after dark, adding both style and safety to your vehicle.

Each cap is easy to install. Simply screw it onto your tire valve stem. The universal fit works on most cars, motorcycles, and other vehicles with standard valve stems.

The caps are corrosion-resistant and waterproof, so they hold up well in rain, snow, or mud. They are lightweight and durable, designed to stay in place while you drive.

Key Features and Benefits

- Glow-in-the-dark material that charges in sunlight for nighttime visibility

• Fluorescent yellow color that stands out during the day and glows at night

• Made from lightweight ABS plastic that resists corrosion and water damage

• Universal fit for most cars, motorcycles, and wheels with standard valve stems

• Easy screw-on installation with no tools required

Who Is This For

- Car owners who want an easy way to add visibility and style to their wheels

• Motorcycle riders looking for a small upgrade that improves safety at night

• Anyone who parks in dark areas and wants to quickly locate their vehicle

• Drivers who enjoy customizing their vehicle with functional accessories

Usage Scenario

After a long day at work, you walk to your car in the dim parking lot. The fluorescent glow from your tire valve caps catches your eye, helping you spot your vehicle quickly. You drive home knowing your wheels are more visible to others in the dark.

Micro Comparison

Basic black plastic valve caps protect your valve stem but offer no visibility. These glow-in-the-dark caps do the same job while adding a bright fluorescent yellow color that charges in sunlight and glows at night. The ABS material is lightweight and resists corrosion better than standard metal caps in wet conditions.

Specifications

Material: ABS

Color: Fluorescent yellow

Size: Approximately 1.6 cm x 1.2 cm / 0.63 in x 0.47 in, inner diameter 0.8 cm / 0.31 in

Quantity options: 4, 8, 12, 16, or 20 pieces

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

Quantity of luminous valve caps as selected (4, 8, 12, 16, or 20 pieces)

Why You Will Love It

These valve caps add a practical glow to your wheels without any complicated installation. The fluorescent yellow color looks sharp during the day and provides a visible glow after dark. It is a small upgrade that makes your vehicle stand out and improves safety in low-light conditions.

Questions and Answers

Question: How do these valve caps glow at night?

Answer: The caps contain a photoluminescent material that absorbs sunlight during the day. Once it gets dark, they release that stored energy as a visible glow.

Question: Do these fit all tire valve stems?

Answer: Yes, they are designed to fit standard valve stems found on most cars, motorcycles, and other vehicles with similar valve sizes.

Question: Will the glow last all night?

Answer: After a full charge in direct sunlight, the glow is brightest for the first few hours and gradually fades. Recharging them the next day restores the glow.

Question: Are these caps waterproof?

Answer: Yes, they are made from ABS plastic and are resistant to water and corrosion. They hold up well in rain and wet conditions.

Question: Do I need tools to install them?

Answer: No tools are needed. Simply unscrew your old valve caps and screw these on by hand.

Give your MINI a subtle custom look with these metal wheel valve caps. They are designed to fit all MINI models including Cooper, Cooper S, One, JCW, Countryman, and Clubman across the R50 to F60 generations. This set of four valve caps replaces your standard plastic ones for a more polished appearance.

These valve caps are made from metal, giving them a durable feel compared to standard plastic caps. They screw on easily to your existing tire valves and help keep dust and debris out. The simple design adds a clean, finished look to your wheels without being flashy.

Whether you drive a classic R53 or a newer F56, these caps are a universal fit for your MINI. They work with all model variants, so you do not need to worry about compatibility. Just remove your old caps and screw these on in seconds.

Upgrading your valve caps is a small change that makes a noticeable difference. These metal caps resist wear better than plastic and maintain their appearance over time. They are a practical and affordable way to personalize your car.

Key Features and Benefits

- Metal construction that offers better durability than standard plastic caps

• Universal fit for all MINI models including Cooper, S, One, JCW, Countryman, and Clubman

• Set of four caps that provides a complete replacement for all your wheels

• Easy screw-on installation that takes just a few minutes without tools

• Helps keep valve stems clean and protected from dirt and moisture

Who Is This For

- MINI owners who want a simple and affordable way to upgrade their car's look

• Drivers tired of plastic valve caps that crack or get lost over time

• Anyone looking for a small gift for a MINI enthusiast

• Owners of multiple MINI models who want one set of caps that fits all their cars

Usage Scenario

Mark noticed his old plastic valve caps were starting to crack and fade on his MINI Cooper S. He wanted something that would last longer and look better without spending much money. He ordered these metal valve caps, screwed them on in under two minutes, and immediately liked the cleaner look. Now his wheels have a more finished appearance every time he walks up to his car.

Micro Comparison

Standard plastic valve caps are prone to cracking and can loosen over time. These metal caps offer a more secure fit and a longer lifespan. They are an easy upgrade that adds a touch of quality to your MINI without changing the overall look of your wheels.

Specifications

- Material: Metal

• Quantity: 4 pieces

• Fitment: For MINI Car All Models including R50 R52 R53 R55 R56 R57 R58 R59 R60 R61 R62 F54 F55 F56 F57 F60 and all variants like Cooper S One JCW Countryman Clubman

Package Includes

- 4 x Wheel Tire Valve Caps

Why You Will Love It

These valve caps are a simple way to add a personal touch to your MINI. The metal build feels more substantial than plastic and holds up better to daily driving. It is a small upgrade that you will notice every time you see your car.

Questions and Answers

Question: Will these fit my 2016 MINI Cooper F56?

Answer: Yes, these valve caps fit all MINI models including the F56 Cooper.

Question: Are these caps made of plastic or metal?

Answer: They are made of metal, which is more durable than standard plastic caps.

Question: How many caps come in the package?

Answer: You get four caps in the set, one for each wheel.

Question: Do I need any tools to install these?

Answer: No tools are needed. Just unscrew your old caps and screw these on by hand.

Question: Will these fit my MINI Countryman?

Answer: Yes, they fit all MINI models including the Countryman and Clubman.

Keep your Chevrolet Equinox running safely with this set of four 315MHz TPMS sensors. Designed for model years 2018 through 2023, these sensors come pre-programmed to match your vehicle, so you can install them without writing any code. They replace OEM part numbers 13516164, 13598772, and 13598771 for a direct fit.

Driving with properly inflated tires improves fuel efficiency and extends tire life. These sensors monitor your tire pressure in real time, alerting you to any drops that could lead to a flat or unsafe driving conditions. With a simple installation process and no programming needed, you can get back on the road with confidence.

Each sensor is built to withstand harsh road conditions and temperature changes. The 315MHz frequency ensures a reliable connection with your vehicle's onboard system, providing accurate pressure readings every time you start the engine. Whether you are replacing a faulty sensor or upgrading an older set, this kit offers a straightforward solution.

Before ordering, confirm that your existing sensor part number matches one of the listed numbers. This ensures compatibility and saves you from returns or installation issues. If you have questions about fitment or the relearn procedure, we are here to help with expert advice.

Key Features and Benefits

- Pre-programmed sensors that require no additional programming, saving you time and effort during installation.

• 315MHz operating frequency that communicates reliably with your Chevy Equinox TPMS system for accurate pressure data.

• Direct replacement for OEM parts 13516164, 13598772, and 13598771, ensuring a perfect fit without modifications.

• Monitors tire pressure and temperature to help prevent blowouts and improve overall driving safety.

• Compatible with multiple relearn methods including stationary, automatic, and OBD, giving you flexibility after installation.

Who Is This For

- Owners of Chevrolet Equinox models from 2018 to 2023 who need to replace worn or faulty TPMS sensors.

• DIY mechanics looking for a plug-and-play sensor kit that does not require specialized programming tools.

• Fleet managers maintaining multiple Equinox vehicles who want a consistent, reliable TPMS replacement option.

Usage Scenario

Mike noticed his 2020 Equinox had a persistent low tire pressure warning on the dash even after inflating all four tires. After checking for leaks, he realized the old sensors were failing. He ordered this four-pack, swapped them out over a weekend using basic tools, and used his scan tool to complete the stationary relearn. The warning light turned off, and his tire readings have been accurate ever since.

Micro Comparison

While some aftermarket sensors require cloning or dealer-level programming, these GANGLE sensors arrive pre-programmed for your specific Equinox model year. This saves you a trip to the shop and eliminates the need for expensive programming equipment. Other universal sensors may need additional adapters or software, but this kit is designed to work right out of the box with your vehicle.

Specifications

Operating Frequency: 315MHz

Part Numbers: 13516164, 13598771, 13598772

Replacement Part Numbers: 13516164, 13598771, 13598772, 23445327, 13586335

Compatibility: Chevrolet Equinox 2018-2023

Package Includes

4x Tire Pressure Sensors

Why You Will Love It

You will enjoy the peace of mind that comes from knowing your tire pressure is always monitored. These sensors install quickly without complex programming, so you can spend less time in the garage and more time on the road. With a direct fit for your Equinox, this kit takes the guesswork out of TPMS replacement.

Questions and Answers

Question: Do these sensors come pre-programmed for my 2020 Chevrolet Equinox?

Answer: Yes, these sensors are pre-programmed for your specific vehicle make, model, and year. No additional programming is needed before installation.

Question: What relearn procedure do I need to use after installing these sensors?

Answer: You can use a stationary relearn with a scan tool, an automatic relearn by driving, or an OBD relearn that writes sensor IDs directly to the module. Check your owner manual for the recommended method.

Question: Will these sensors work with my 2018 Equinox that has a different part number?

Answer: These sensors replace OEM parts 13516164, 13598772, and 13598771. Please verify your existing sensor part number matches one of these before ordering to ensure compatibility.

Question: Do I need any special tools to install these TPMS sensors?

Answer: Basic tire mounting tools are required to dismount and remount the tire. A scan tool is recommended for the stationary relearn procedure, but some vehicles can complete the relearn by driving.

Question: How do I confirm that these sensors are the right fit for my Equinox?

Answer: Check your vehicle VIN code, model year, and the part number on your current sensor. If your existing part number matches 13516164, 13598771, or 13598772, these sensors will work.

Give your LYNK&CO a clean, custom look while protecting your tire valves from dirt and moisture. These four aluminum alloy valve caps replace plastic factory caps with a more durable and stylish solution.

Each cap is made from aluminum alloy, offering a solid feel and lasting resistance to rust and corrosion. The set includes an inner sealing ring that helps keep air in and debris out, supporting stable tire pressure over time. Available in black, red, green, blue, gray, and silver, you can match your car's color or add a subtle accent.

Installation takes seconds with no tools required. Simply screw each cap onto your tire valve stem for an instant upgrade that combines function and appearance. These caps are designed to fit standard tubeless tire valves and are compatible with LYNK&CO 01 EM-P, EM-F, 02 Hatchback, 03, 05, and 06 models.

Keep your valve cores safe from clay, water, and snow with these aluminum alloy dust covers. They help prevent flat tires caused by debris entering the valve, giving you one less thing to worry about on the road.

Key Features and Benefits

- Aluminum alloy construction that resists rust and lasts longer than plastic

• Built-in sealing ring that helps prevent air leaks and flat tires

• Easy screw-on installation that takes seconds with no tools needed

• Dust proof design that protects the valve core from dirt, water, and snow

• Available in six colors to match or accent your vehicle's style

Who Is This For

- LYNK&CO owners looking to replace worn or plain plastic valve caps

• Drivers who want a durable, rust-resistant upgrade for their tire valves

• Car enthusiasts who enjoy adding small custom touches to their vehicle

• Anyone wanting to protect tire valve cores from weather and road debris

Usage Scenario

Mike noticed his factory plastic valve caps were cracked and letting dust in. After a quick tire pressure check, he swapped them out for these aluminum alloy caps in silver to match his LYNK&CO 03. The sealing ring gave him confidence that his tire pressure would stay steady, and the clean metal finish looked much better than the old plastic.

Micro Comparison

Plastic valve caps can crack, fade, or let dirt into the valve over time. These aluminum alloy caps offer a stronger, more durable alternative with a built-in sealing ring for extra protection. They also give your wheels a more finished look without the high cost of custom lug nuts or center caps.

Specifications

- Material: Aluminum alloy

• Size: 1.7 x 0.8 cm / 0.67 x 0.31 in

• Color options: Black, red, green, blue, gray, silver

• Quantity: 4 pieces per set

Package Includes

- 4 x Aluminum alloy tire valve caps

Why You Will Love It

These valve caps are a simple way to add durability and style to your car. The aluminum alloy build and sealing ring give you practical protection, while the color options let you personalize your ride. It is a small upgrade that makes a noticeable difference every time you see your wheels.

Questions and Answers

Question: Will these fit my LYNK&CO 01?

Answer: Yes, these caps are designed to fit standard tire valves on LYNK&CO 01, 02, 03, 05, and 06 models.

Question: Do they come with a sealing ring?

Answer: Yes, each cap has a high quality sealing ring inside to help prevent air leaks.

Question: Are these caps rust proof?

Answer: They are made of aluminum alloy, which resists rust and corrosion.

Question: How do I install them?

Answer: Simply screw each cap onto your tire valve stem by hand. No tools are required.

Question: What colors are available?

Answer: You can choose from black, red, green, blue, gray, or silver.