Keep your tire pressure monitoring system working with this set of four TPMS sensors. Designed for a wide range of BMW, Mercedes-Benz, and other luxury vehicles, these sensors provide accurate tire pressure readings to help you drive with confidence. They come pre-programmed for your vehicle, so no sensor programming is needed, just a simple relearn process to get them up and running.

These tire pressure sensors are a direct replacement for your original equipment. They are built to be durable and sensitive, ensuring you get reliable data on your tire pressure. This helps you maintain proper tire inflation, which can improve fuel efficiency and extend the life of your tires. The 433MHz frequency is standard for many modern vehicles, ensuring compatibility with your car's onboard system.

Installing a new set of TPMS sensors is a smart maintenance step. This set includes four sensors, giving you everything you need for a full replacement on most vehicles. They are designed to be a straightforward swap for your old sensors. Once installed, you will need to use an OBDII tool to activate them with a relearn procedure, which is a standard step for TPMS replacement.

Driving with a properly functioning TPMS gives you one less thing to worry about. You will get clear warnings on your dashboard if your tire pressure drops, allowing you to address the issue quickly. This set is a practical choice for keeping your vehicle's safety systems operating as intended.

Key Features and Benefits

- Pre-programmed sensors that require no sensor programming, simplifying the installation process for your specific vehicle.

• Direct replacement design that fits a wide range of BMW and Mercedes-Benz models, ensuring a proper fit for your car.

• Set of four sensors that provides a complete replacement kit for your vehicle, saving you time and effort.

• 433MHz frequency that matches the standard for many modern vehicles, ensuring reliable communication with your car.

• Durable construction that is built to last, providing long-term performance and accurate readings.

Who Is This For

- BMW owners with models like the 3 Series G20, 5 Series G30, X3 G01, X5 G05, and many others needing a sensor replacement.

• Mercedes-Benz owners with models such as the A-Class W177, C-Class W206, E-Class W213, GLE V167, and S-Class W223.

• Drivers of other compatible luxury vehicles including Alpina, Rolls-Royce, and Toyota Supra who need a reliable TPMS sensor.

• Car owners who prefer a pre-programmed sensor to avoid complex setup steps and get their system working quickly.

Usage Scenario

Mark noticed his BMW X5's tire pressure warning light was on. After checking the tires and finding no visible issues, he knew the sensors were likely failing after several years of use. He ordered this set of four TPMS sensors. He took the car to his local mechanic, who installed the new sensors and performed the OBDII relearn procedure in just a few minutes. The warning light turned off, and Mark now drives with peace of mind, knowing his tire pressure is being accurately monitored.

Micro Comparison

While some TPMS sensors require you to program them with a separate tool, these sensors come pre-programmed for your vehicle. This saves you a step and reduces the chance of setup errors. They are a direct replacement for your original sensors, making the switch simple and straightforward.

Specifications

- Model Number: A0009057205, A0009052102Q04, A0009052102

• OEM Number: A00090054104

• Frequency: 433MHz

• Quantity: 4 sensors

Package Includes

- 4 x TPMS Tire Pressure Sensors

Why You Will Love It

You will appreciate the simple installation thanks to the pre-programmed design. This set gives you a complete replacement, so you can fix your TPMS in one go. It is a practical way to keep your vehicle's safety features working correctly.

Questions and Answers

Question: Do these sensors come already programmed for my car?

Answer: Yes, these sensors come pre-programmed for your specific vehicle make and model. You do not need to program them yourself.

Question: Will I need any special tools to install these sensors?

Answer: You will need an OBDII tool to perform the relearn procedure after installation. The sensors themselves do not require a programming tool.

Question: How do I know if these sensors will fit my BMW or Mercedes-Benz?

Answer: Please check the OE number (part number) on your original sensor to confirm it matches one of the model numbers listed: A0009057205, A0009052102Q04, or A0009052102.

Question: Can I install these sensors myself?

Answer: Installation of TPMS sensors is recommended to be performed by trained professionals. You will need to have the tires removed and remounted.

Question: What is the relearn procedure for these sensors?

Answer: The relearn procedure is done using an OBDII tool. This process activates the new sensors so they communicate with your vehicle's TPMS system.

Show off your European pride and protect your tires with these 4 durable aluminum valve caps. Each cap features a distinct emblem for Germany, France, or Italy, letting you add a personal and patriotic touch to your car or motorcycle. They are a simple upgrade that combines style with practical protection for your tire valves.

These valve caps are crafted from high-quality aluminum, making them resistant to rust and corrosion. They screw on easily to replace your standard plastic caps. Their main job is to seal the valve stem, preventing air leaks and keeping out dirt, dust, and moisture that can cause damage over time. By protecting the valve core from water, clay, and snow, they help you maintain stable tire pressure.

The set includes four caps, which is perfect for most cars and motorcycles. The design is universal and fits all standard tire valves, so you can install them in seconds without any tools. Whether you are a fan of German engineering, French style, or Italian flair, these caps are a subtle and cool way to represent your favorite country on the road.

Key Features and Benefits

- High-quality aluminum construction that resists rust and corrosion for long-lasting use.

• Distinct Germany, France, and Italy flag emblems that let you show your national pride or personal style.

• Easy to install by simply screwing them onto the air valve, no tools required.

• Protects your air valve from leakage, dirt, and other external damage to help maintain tire pressure.

• Prevents corrosion of the valve core caused by direct contact with clay, water, and snow.

Who Is This For

- Car and motorcycle owners who want to add a personalized style element to their wheels.

• Fans of Germany, France, or Italy who want to display their heritage or enthusiasm on their vehicle.

• Drivers looking for a simple, affordable upgrade to replace worn-out or basic plastic valve caps.

• Anyone who wants to protect their tire valves from dirt, moisture, and air leaks for better tire maintenance.

Usage Scenario

Mark had just finished washing his black sedan and noticed the old plastic valve caps were cracked and faded. He wanted a small detail that would make his car stand out at the next local car meet. He found this set of aluminum valve caps with the Italian flag emblem. He screwed them on in under a minute. Now, every time he walks up to his car, the subtle touch of red, white, and green on each wheel gives him a sense of pride and a unique look that sparks conversations with other enthusiasts.

Micro Comparison

While standard plastic caps are cheap, they can crack, fade, and allow moisture to reach the valve core. These aluminum caps are much more durable and provide a better seal against the elements. The engraved flag emblems also offer a level of personalization that plain metal or black caps simply cannot match, making them a more stylish and functional choice for the same simple installation.

Specifications

- Material: Aluminum

• Color: As photos (Germany, France, Italy flag emblems)

• Size: Universal fit for any car tires

Package Includes

- 4 x Aluminum Tire Valve Caps (with Germany, France, Italy flag emblems)

Why You Will Love It

These valve caps are a small, affordable detail that makes a big visual impact on your vehicle. You will love how easy they are to install and how they instantly give your wheels a cleaner, more customized look. Plus, knowing they are protecting your tire valves from the elements gives you peace of mind every time you drive.

Questions and Answers

Question: Will these fit my motorcycle?

Answer: Yes, they are universal and fit all standard tire valves, including motorcycles.

Question: Do these caps prevent air from leaking out?

Answer: Yes, they seal the valve stem to help prevent air leaks and maintain tire pressure.

Question: How do I install them?

Answer: Simply unscrew your old valve caps and screw these new ones on by hand. No tools are needed.

Question: Are these caps made of metal or plastic?

Answer: They are made of high-quality aluminum, which is more durable than plastic.

Question: Which flags are on these caps?

Answer: The set includes emblems for Germany, France, and Italy.

Keep your Audi's tires at the correct pressure with this direct replacement TPMS sensor. It operates at 433MHz and is pre-programmed for your specific vehicle model and year, so you can install it without complex coding. This sensor helps you maintain safe driving conditions by providing accurate tire pressure readings to your car's monitoring system.

This tire pressure sensor is designed as a direct fit for a wide range of Audi models including the A3, A4, A5, A6, A7, A8, E-Tron GT, Q2, Q3, Q4, Q5, Q7, Q8, RS7, and TT. It also fits select models from Bentley, McLaren, Porsche, Skoda, and Volkswagen. The part numbers 5Q0907275 and 5Q0907275B ensure compatibility with your vehicle's original system.

Installation is straightforward for a professional. The sensor needs to be activated using a scan tool or through the vehicle's "re-learning" procedure after installation. An OBDII tool is required for the simplified relearn process. We recommend having a trained professional install the sensor to ensure proper function and tire safety.

Each sensor comes with a battery life of about 3 years, giving you long-term reliability. The package includes the sensor itself. Before ordering, please use the vehicle fitment information provided to confirm compatibility. If you are unsure, send us your VIN code so we can verify the correct part for your car.

Key Features and Benefits

- Pre-programmed for your specific Audi model that eliminates the need for sensor programming

• 433MHz operating frequency that ensures reliable communication with your vehicle's TPMS system

• Direct replacement design that fits a wide range of Audi, Bentley, McLaren, Porsche, Skoda, and VW models

• Battery life of about 3 years that provides long-lasting performance without frequent replacements

• Simplified relearn process with OBDII that makes activation straightforward for professionals

Who Is This For

- Audi owners who need to replace a faulty or dead TPMS sensor in their vehicle

• Car enthusiasts who want to maintain accurate tire pressure monitoring for safety and fuel efficiency

• Workshops and mechanics looking for a reliable, pre-programmed sensor for a range of Audi models

• Drivers who prefer professional installation and want a sensor that fits their specific car year and model

Usage Scenario

Mark noticed his Audi A4's tire pressure warning light stayed on even after checking the tires. A quick scan at his local shop showed one of the TPMS sensors had failed. Instead of going to the dealership, his mechanic ordered this pre-programmed sensor. After installation and a simple relearn procedure with an OBDII tool, the warning light turned off. Mark now drives with confidence knowing his tire pressure monitoring system is working correctly again.

Micro Comparison

Unlike universal TPMS sensors that require programming and may have compatibility issues, this sensor comes pre-programmed for your specific Audi model. It uses the original part numbers 5Q0907275 and 5Q0907275B, ensuring a direct fit without guesswork. This saves you time and reduces the risk of installation errors compared to aftermarket sensors that need additional configuration.

Specifications

- Material: 5Q0907275

• Model Number: tpms sensor 5Q0907275

• OEM Number: 5Q0907275B

• Operating Frequency: 433MHz

• Battery Life: About 3 years

Package Includes

- 1 x TPMS Tire Pressure Sensor

Why You Will Love It

You will love the peace of mind that comes from a properly functioning tire pressure monitoring system. This sensor is pre-programmed for your car, so installation is simple for a professional. With a battery life of about 3 years, you can rely on accurate tire pressure readings for a long time.

Questions and Answers

Question: Is this sensor pre-programmed for my Audi A6?

Answer: Yes, this sensor comes pre-programmed specifically for your vehicle's make, model, and year. You do not need to program it yourself.

Question: Do I need a special tool to activate this sensor?

Answer: Yes, you will need a scan tool or the vehicle's "re-learning" procedure to activate the sensor after installation. An OBDII tool is required for the simplified relearn process.

Question: What is the frequency of this TPMS sensor?

Answer: The sensor operates at 433MHz.

Question: How long does the battery last in this sensor?

Answer: The battery life is about 3 years.

Question: Can I install this sensor myself?

Answer: We recommend installation by a trained professional. The process involves dismounting the tire, removing the old sensor, and mounting the new one correctly.

Question: How do I know if this sensor fits my car?

Answer: Use the vehicle fitment information provided in the listing to confirm compatibility. If you are unsure, send us your VIN code and we will verify the correct part for your vehicle.

Replace your faulty Ford tire pressure sensors with this set of 4 pre-programmed TPMS units. Designed for a wide range of Ford models including the F-150, Focus, and C-Max, these sensors operate at 433MHz and match OEM part numbers EV6T-1A180-CB, EV6T-1A180-CC, and others. They come ready to install with no sensor programming required, just a simple relearn procedure.

These tire pressure sensors are a direct fit for many Ford vehicles from 2014 onward. They are built to deliver accurate and stable pressure readings, helping you maintain proper tire inflation and improve fuel efficiency. The sensors are 100% brand new and made with quality electronic components for long-term reliability.

Installation is straightforward for a trained professional. The sensors come pre-programmed for your specific Ford make, model, and year. After installation, you will need to activate them using a scan tool or perform a simple relearn procedure, which typically requires an OBDII tool. This ensures your vehicle's TPMS system will immediately recognize the new sensors.

Choose this set for a cost-effective, high-quality aftermarket solution that matches the performance of the original equipment. With a realistic price and durable construction, these sensors are a smart choice for keeping your Ford's tire pressure monitoring system working correctly.

Key Features and Benefits

- Pre-programmed for Ford vehicles that requires no additional sensor programming, saving you time and hassle during installation.

• Operates at 433MHz frequency that ensures compatibility with your Ford's TPMS system for accurate pressure readings.

• 100% brand new electronic components that provide stable and sensitive performance for reliable tire monitoring.

• Matching OEM numbers EV6T-1A180-CB, EV6T-1A180-CC, and more that guarantees a direct replacement for your original sensors.

• Durable construction that withstands road conditions and delivers long-lasting service.

Who Is This For

- Ford owners with a TPMS warning light on, needing a direct replacement for faulty sensors.

• DIY mechanics and automotive enthusiasts who prefer to install and activate their own TPMS sensors.

• Workshop technicians looking for a reliable, pre-programmed aftermarket sensor for customer vehicles.

• Owners of compatible Ford models like the F-150, Focus, C-Max, Ecosport, and Kuga from 2014 to 2022.

Usage Scenario

Mark noticed the low tire pressure light blinking on his 2015 Ford F-150 dashboard. After checking his tires and finding them properly inflated, he knew the TPMS sensors were failing. He ordered this 4-pack of pre-programmed sensors. At his local garage, the technician removed the old sensors, installed the new ones, and used an OBDII tool to complete the relearn process. Within minutes, the warning light was off, and Mark could drive with confidence knowing his tire pressure was being monitored again.

Micro Comparison

Unlike universal TPMS sensors that require complex programming and cloning, these sensors come pre-programmed specifically for your Ford model. This eliminates the need for a specialized programming tool, making installation simpler and faster. They provide the same reliable performance as the original factory sensors at a more affordable price.

Specifications

- Material: electronic

• Model Number: EV6T-1A180-CB, EV6T-1A180-DC

• OEM Number: EV6T-1A180-CB, EV6T-1A180-CC, EV6T-1A180-CD, EV6T-1A180-CE, EV6T-1A180-DB, EV6T-1A180-DC, EV6T-1A180-DD, EV6T-1A180-DE

• Frequency: 433MHz

• Quantity: 4 sensors per set

Package Includes

- 4 x Tire Pressure Sensors

Why You Will Love It

You will love the peace of mind that comes with accurate tire pressure monitoring, helping you avoid uneven tire wear and improve fuel economy. The easy pre-programmed design eliminates complex setup, so you or your mechanic can get them installed quickly. It is a practical, budget-friendly way to restore your Ford's safety system without compromising on quality.

Questions and Answers

Question: Do I need to program these sensors before installing them?

Answer: No, these sensors come pre-programmed for your Ford model. No sensor programming is required before installation.

Question: What Ford models are compatible with these sensors?

Answer: They are compatible with many Ford models including F-150, Focus, C-Max, Ecosport, Fiesta, Kuga, Mondeo, Ranger, and Transit Connect, primarily from 2014 onward. Check the full list in the description.

Question: How do I activate the sensors after installation?

Answer: You need to activate them using a TPMS scan tool or perform a simplified relearn procedure, which usually requires an OBDII tool.

Question: Are these sensors a direct replacement for the original Ford parts?

Answer: Yes, they match OEM numbers like EV6T-1A180-CB and are designed as a direct replacement for the original sensors on compatible Ford models.

Question: Is it difficult to install these sensors?

Answer: Installation is recommended to be performed by a trained professional. The process involves removing the old sensor, installing the new one, and performing a relearn.

Give your bike tires a subtle upgrade with these pentagram-shaped valve stem caps. Made from a combination of plastic and fine copper, they replace standard caps to add a touch of style while keeping dirt and moisture out. This set of four fits most Schrader valves, making them a simple swap for mountain bikes, road bikes, and folding bikes.

These tire valve caps are designed to be lightweight and easy to install without any tools. Just screw them on in place of your old caps. The star shape adds a unique look to your wheels, making your bike stand out without adding bulk. They help prevent air leaks and block rain water and debris from entering the valve, which can help extend the life of your tires.

Each cap is crafted from durable plastic with a fine copper core for a secure fit. The silver color matches most wheel finishes. At just 17 grams for the set of four, they add almost no weight to your bike. Whether you are commuting, trail riding, or just cruising around town, these caps offer a functional and decorative upgrade.

Key Features and Benefits

- Pentagram shaped design that gives your wheels a distinctive look

• Plastic and fine copper construction that resists corrosion and ensures a snug fit

• Universal Schrader valve compatibility that works on most bike types

• Tool-free installation that lets you swap caps in seconds

• Lightweight build at only 17g total that does not affect wheel balance

• Dust and moisture protection that helps keep valve stems clean and functional

Who Is This For

- Cyclists who want a simple visual upgrade for their wheels

• Mountain bikers and trail riders who ride on dusty or wet terrain

• Commuters looking for low-maintenance protection for tire valves

• Anyone replacing lost or worn-out valve caps on bikes with Schrader valves

Usage Scenario

After a long ride on a dusty trail, Mark noticed his tire pressure had dropped more than usual. He checked the valve and found the old cap was cracked and letting in dirt. He swapped in this set of pentagram valve caps. The star shape gave his wheels a fresh look, and the snug fit kept out debris on the next ride. No more slow leaks from a dirty valve.

Micro Comparison

Basic plastic caps often crack or loosen over time, and metal caps can seize onto the valve stem. These caps use a fine copper core for a secure but non-stick fit, paired with a durable plastic shell that resists wear. The pentagram shape adds a visual detail that plain round caps lack, giving your bike a custom touch without the cost of specialty parts.

Specifications

- Material: Plastic + Fine Copper

• Pattern: Schrader valve

• Size: 2.2 x 1.4 cm / 0.87 x 0.55 in

• Color: Silver

• Quantity: 4 Pcs

• Weight: 17 g / 0.6 oz

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 4 x Tire Valve Caps

Why You Will Love It

These caps add a personal touch to your bike without costing much. The star shape gives your wheels a distinct look that stands out in a parking lot or on the trail. You get reliable protection for your valves, easy installation, and a set of four that covers all your tires. A small change that makes a real difference.

Questions and Answers

Question: Will these fit my car tires?

Answer: These caps are designed for Schrader valves, which are common on cars. However, they are best suited for bicycle use due to their smaller size and lightweight build.

Question: Are these caps metal or plastic?

Answer: They are made from a combination of plastic and fine copper. The outer shell is plastic, and the inner core is fine copper for a secure fit.

Question: Do these caps prevent air leaks?

Answer: Yes, they help prevent air leakage by providing a tight seal over the valve stem. They also block dirt and rain water from entering the valve.

Question: How do I install these caps?

Answer: Simply unscrew your old valve caps and screw these on by hand. No tools are needed.

Question: Will the star shape get in the way while riding?

Answer: No, the caps are compact and sit flush against the wheel. They do not interfere with riding, pumping, or wheel rotation.

Give your Volvo a refined finishing touch with a set of four aluminum tire valve caps featuring the iconic R Design emblem. These caps replace your standard plastic covers with a durable metal upgrade that adds a subtle custom look to your wheels while helping to keep your valve stems clean and secure.

Each cap screws directly onto the tire valve, creating a snug fit that helps block out dirt, moisture, and debris. By protecting the valve core from exposure to clay, water, and snow, these covers play a small but important role in helping to maintain stable tire pressure over time. The aluminum construction resists corrosion and holds up well against everyday driving conditions.

Installation takes just seconds with no tools required. Simply remove your old caps and screw on the new ones. The universal design fits standard tire valves on cars, motorcycles, bicycles, and more. Whether you drive a Volvo S90, V90, XC60, V70, S60, V60, EX30, or other compatible model, these caps offer a clean, coordinated look that matches the R Design styling.

This set includes four caps, one for each tire. The aluminum finish and embossed emblem give a polished appearance that stands out without being flashy. It is a small upgrade that makes a noticeable difference every time you walk up to your car.

Key Features and Benefits

- Aluminum construction that resists corrosion and provides a durable upgrade over plastic caps

• R Design emblem adds a custom OEM-style detail to your wheels

• Easy to install with a simple screw-on design that requires no tools

• Helps protect the valve core from dirt, clay, water, and snow to support stable tire pressure

• Universal fit works on car, motorcycle, and bicycle tire valves

Who Is This For

- Volvo owners who want to match the R Design aesthetic on their wheels

• Drivers looking for a simple metal upgrade over standard plastic valve caps

• Anyone who wants to prevent dust and moisture from entering the valve stem

Usage Scenario

Mark noticed his plastic valve caps were starting to crack after a long winter. When he replaced them with this aluminum set, the screw-on fit felt solid and secure right away. The R Design emblem on each cap matched the look of his Volvo perfectly. A few weeks later, after driving through rain and mud, he checked his tire pressure and found it held steady. The caps were still clean and tight, with no signs of corrosion or loosening.

Micro Comparison

Plastic valve caps can crack, fade, or loosen over time, especially in changing weather. These aluminum caps offer a more durable alternative that resists corrosion and stays securely in place. The embossed R Design emblem gives your wheels a coordinated look that standard blank caps cannot match.

Specifications

Material: Aluminum

Color: As photos

Size: Applicable to any car tires

Package Includes

4 x Aluminum tire valve caps

Why You Will Love It

These valve caps are a small upgrade that adds personality and protection to your Volvo. The aluminum build feels solid in your hand, and the R Design emblem ties into your car's styling. Every time you check your tires, you will appreciate the clean, finished look.

Questions and Answers

Question: Will these fit a standard car tire valve?

Answer: Yes, they fit any standard tire valve on cars, motorcycles, and bicycles.

Question: Do they require any tools to install?

Answer: No, simply screw them on by hand. No tools are needed.

Question: Are these caps weather resistant?

Answer: Yes, the aluminum material resists corrosion and helps keep out dirt, water, and snow.

Question: Which Volvo models are compatible with this design?

Answer: They fit models such as S90, V90, XC60, V70, S60, V60, EX30, XC40, XC90, XC70, V40, V50, C30, C70, S80, S40, and others with R Design styling.

Question: How many caps come in the package?

Answer: The package includes four caps, one for each tire.

Replace worn or damaged tire valves with this set of 4 high-quality TR413 valve stems. Made from durable EPDM rubber and an aluminum alloy body, these universal rubber nozzles are designed for tubeless tires on cars and light trucks. Each stem comes with a PTFE seal valve core for reliable air retention.

These valve stems offer a direct replacement for standard TR413 and TR412 models. The weather-resistant EPDM rubber construction helps maintain a tight seal against the wheel rim, reducing the risk of slow leaks. The aluminum alloy stem resists cracking and corrosion over time.

Installing these valve stems is straightforward. Simply remove the old valve, pull the new rubber stem through the wheel hole from the inside, and secure it. The included valve cores use a PTFE seal to provide a consistent, airtight closure. This set gives you four units, enough for a complete vehicle replacement or spares for future use.

Whether you are performing routine tire maintenance or building a custom wheel setup, these valve stems provide a simple and effective solution. They fit standard tubeless rims and work with most common tire pressure monitoring systems (TPMS).

Key Features and Benefits

- EPDM rubber construction that resists weather, ozone, and cracking for a long-lasting seal

• Aluminum alloy valve stem that prevents rust and corrosion for reliable performance

• Valve core with PTFE seal that provides an airtight closure to maintain tire pressure

• Universal fit for TR412 and TR413 applications that suits most cars and light trucks

• Pack of 4 units that gives you a full set for one vehicle or spare replacements

Who Is This For

- Car owners replacing old, cracked, or leaking tire valve stems during routine maintenance

• DIY mechanics performing tire changes or wheel upgrades at home

• Workshops and garages needing a bulk supply of reliable rubber valve stems for customer vehicles

• Off-road or light truck owners looking for durable replacement valves for tubeless tires

Usage Scenario

Mike noticed his car's tires were losing pressure slowly over a few days. After checking the tread and sidewalls, he found the rubber valve stems had cracked from age. He ordered this 4-pack of TR413 valve stems. In under 20 minutes, he removed the old stems, installed the new ones, and inflated his tires back to the correct pressure. The slow leak stopped, and his tires held air consistently for weeks afterward.

Micro Comparison

Compared to metal snap-in or bolt-in valve stems, these rubber stems are easier to install on standard rims and provide a more flexible seal that conforms to the wheel hole. The EPDM material offers better weather resistance than basic rubber stems, helping them last longer without drying out or cracking. This set gives you four stems with pre-installed valve cores, saving you from buying cores separately.

Specifications

Type: TR-413

Material: Aluminum alloy + Rubber

Colour: Black

Height: about 45 mm / 1.8 in

Diameter: about 19 mm / 0.7 in

Package Includes

- 4 x TR413 Rubber Nozzle

Why You Will Love It

These valve stems give you a simple, affordable way to fix slow tire leaks and restore proper air pressure. The durable materials mean you won't have to replace them again soon. With four in a pack, you have exactly what you need for a full set of tires.

Questions and Answers

Question: Will these fit my 2008 Honda Civic?

Answer: Yes, these TR413 valve stems are a common size for most passenger cars, including the 2008 Honda Civic. They fit standard 0.453-inch rim holes.

Question: Do these come with the valve core installed?

Answer: Yes, each valve stem comes with a valve core already installed. You can use them right out of the package.

Question: Are these compatible with TPMS sensors?

Answer: These are standard rubber valve stems and will work with most clamp-in or snap-in TPMS sensors. Check your sensor's mounting style to confirm compatibility.

Question: Can I use these on a truck or SUV?

Answer: Yes, they work on light trucks and SUVs that use standard tubeless rims with a 0.453-inch valve hole. For heavy-duty trucks, check your rim size first.

Question: How do I install these valve stems?

Answer: Remove the old valve from the wheel, lubricate the new rubber stem, pull it through the rim hole from the inside using a valve stem tool, and tighten the nut. Then inflate the tire.

Question: What is the diameter of the rubber base?

Answer: The rubber base diameter is about 19 mm / 0.7 in. This fits standard passenger car and light truck rims.

Keep your tire pressure in check with this direct-fit TPMS sensor designed for a wide range of GM vehicles from 2010 to 2016. Operating at 315MHz, this sensor helps you monitor tire conditions in real time to support safer driving. It comes pre-programmed for your specific vehicle make, model, and year, so no sensor programming is required before installation.

Each sensor is built to deliver reliable performance by monitoring internal tire pressure and temperature. This information helps you stay aware of your tire health and can reduce the risk of issues caused by under-inflation or tire failure. The sensor uses a 315MHz frequency and is compatible with multiple GM brand models including Buick, Cadillac, Chevrolet, and GMC.

Installation is straightforward for a trained professional. The sensor must be activated using the right scan tool or by following your vehicle's relearn procedure. Three common relearn methods include stationary relearn, automatic relearn while driving, and OBD relearn which writes the sensor ID directly to the TPMS module. Professional installation is recommended for best results.

Before ordering, confirm that your vehicle's existing part number matches one of the listed replacement numbers. If the numbers do not match, the sensor will not work with your vehicle. You can also check your car's VIN code, model, and year to ensure compatibility.

Key Features and Benefits

- Comes pre-programmed for your specific vehicle that eliminates the need for manual sensor programming

• 315MHz operating frequency that ensures compatibility with a wide range of GM vehicles from 2010 to 2016

• Monitors tire pressure and temperature in real time to help you avoid driving on under-inflated or unsafe tires

• Direct replacement design that fits multiple OEM part numbers including 13581558, 22854866, and 25799331

• Supports multiple relearn methods including stationary, automatic, and OBD relearn for flexible activation

Who Is This For

- Owners of Buick, Cadillac, Chevrolet, or GMC vehicles from model years 2010 to 2016 who need a direct-fit TPMS replacement

• Drivers who want to maintain proper tire pressure for better fuel efficiency, tire longevity, and road safety

• Car owners looking for a pre-programmed sensor that reduces installation complexity and saves time at the shop

• Fleet or workshop professionals who service multiple GM vehicles and need a reliable, compatible TPMS option

Usage Scenario

Mark noticed his Chevy Cruze was showing a low tire pressure warning light on the dashboard. After checking the tire visually, he decided to replace the old sensor instead of just adding air. He ordered a set of these pre-programmed 25799331 sensors and had them installed by a local tire shop. Once the relearn procedure was done using an OBD tool, the warning light turned off and the system started showing accurate pressure readings again. Now Mark drives with more confidence, knowing his TPMS is working properly.

Micro Comparison

Unlike universal TPMS sensors that require manual programming and may not sync correctly with your vehicle's system, this sensor comes pre-programmed for your specific GM model. It matches OEM part numbers like 25799331, 13581558, and 22854866, so you get a true direct-fit replacement. This saves time during installation and reduces the risk of compatibility issues.

Specifications

- Part Number: 25799331

• Replacement Part Numbers: 13581558, 22854866, 25799331

• Operating Frequency: 315MHz

• No sensor programming required

Package Includes

- 1 or 4 Tire Pressure Sensors (depending on selection)

Why You Will Love It

You get a sensor that is already set up for your vehicle, so you skip the programming step and reduce installation hassle. It helps you keep an eye on tire conditions in real time, giving you one less thing to worry about on the road. With broad GM compatibility and a straightforward relearn process, this sensor makes TPMS replacement simple and effective.

Questions and Answers

Question: Does this sensor work with my 2014 Chevy Silverado 1500?

Answer: Yes, this sensor is compatible with the 2014-2016 Chevy Silverado 1500. Please confirm your existing part number matches 25799331, 13581558, or 22854866.

Question: Do I need to program this sensor before installing it?

Answer: No, the sensor comes pre-programmed for your specific vehicle make, model, and year. You only need to activate it using a scan tool or your vehicle's relearn procedure.

Question: What relearn methods can I use after installation?

Answer: You can use stationary relearn, automatic relearn by driving, or OBD relearn which writes the sensor ID to the TPMS module through the OBD connector.

Question: How do I know if this sensor fits my car?

Answer: Check your vehicle's VIN code, model, and year against the fitment list. Also make sure your existing part number matches one of the replacement numbers listed.

Question: Can I install this sensor myself?

Answer: Installation is recommended to be performed by a trained professional. The sensor must be mounted inside the tire and the system must be relearned after installation.

Keep your BYD tire valves clean, sealed, and looking sharp with this set of four aluminum alloy valve caps. Designed to block out dust, water, and road grime, they help maintain stable tire pressure while adding a subtle custom touch to your wheels.

These caps replace standard plastic covers with a more durable metal build. Each cap features a built-in sealing ring that helps prevent air leaks around the valve stem. The threaded design screws on easily by hand and stays secure during driving.

Choose from red, black, or silver to match your BYD Atto 3, Yuan Plus, Han, Tang EV, F3, E6, Dmi Song, F0, Qin Pro, G3, I3, Ea1 Max, G6, or 2din. The compact size fits standard tire valves without adding bulk or interfering with valve operation.

Installation takes seconds with no tools required. Simply remove your old caps and screw on these metal replacements. They stay put on rough roads and resist corrosion from rain, snow, and road salt.

Key Features and Benefits

- Aluminum alloy construction that resists rust and corrosion for long-lasting use

• Built-in sealing ring that helps prevent slow air leaks from the valve stem

• Dustproof and waterproof design that keeps dirt, mud, and moisture away from the valve core

• Easy hand-tight installation with no tools or adapters needed

• Available in three colors to coordinate with your car's look

• Universal fit for most standard tire valves including BYD models

Who Is This For

- BYD owners who want to replace worn or missing plastic valve caps with a metal upgrade

• Drivers who park outdoors or drive on dusty roads and need extra valve protection

• Anyone looking to add a small color accent to their wheels without spending much

• Car enthusiasts who prefer durable metal parts over disposable plastic covers

Usage Scenario

After noticing one of his plastic valve caps had cracked and let dirt into the valve stem, Mark ordered this set for his BYD Atto 3. He screwed on the red aluminum caps in under two minutes. A month later, after driving through rain and gravel roads, all four caps stayed tight and clean. His tire pressure remained steady, and the red accents gave his wheels a sportier look.

Micro Comparison

Standard plastic valve caps can crack from UV exposure and temperature changes, letting moisture and dust reach the valve core. These aluminum alloy caps resist weather and impact better than plastic. The included sealing ring adds an extra layer of protection that most basic metal caps lack, helping maintain consistent tire pressure over time.

Specifications

- Material: Aluminum alloy

• Color options: Red, black, silver

• Size option A: 1.5 x 1 cm / 0.6 x 0.4 in

• Size option B: 1.2 x 0.9 cm / 0.5 x 0.4 in

• Weight per set: 20 g / 0.7 oz

Package Includes

- 4 x Universal car valve stem caps

Why You Will Love It

These caps give you a simple way to protect your tire valves without spending much. The metal build feels more solid than plastic, and the color options let you personalize your car. Once installed, you can forget about them — they just work in the background keeping dirt out and air in.

Questions and Answers

Question: Will these fit my BYD Atto 3 tire valves?

Answer: Yes, these caps fit standard tire valves used on BYD Atto 3 and most other BYD models.

Question: Do these caps prevent tire air leaks?

Answer: The built-in sealing ring helps reduce the chance of slow leaks through the valve stem, but they do not fix existing valve damage.

Question: Are these caps made of metal or plastic?

Answer: They are made of aluminum alloy, which is more durable than plastic and resists rust.

Question: Can I choose a different color for each cap?

Answer: Each set contains four caps of the same color. You would need to buy multiple sets for mixed colors.

Question: Do I need tools to install these valve caps?

Answer: No tools are required. Simply screw them on by hand until snug.

Question: Will these caps fit on aftermarket wheels?

Answer: They fit standard tire valve stems on most factory and aftermarket wheels that use a standard valve.

Fix curb rash, scuffs, and scratches on your car rims without a trip to the body shop. This gloss black wheel repair kit comes with a precision touch-up pen that makes it easy to restore the look of your wheels at home.

Whether you drive on rough roads or just want to keep your rims looking fresh, this rim paint kit offers a simple solution. The pen applicator gives you control, so you can cover small chips and scratches without making a mess.

The touch-up paint is designed to match gloss black rims, helping you hide imperfections and protect the metal from rust. It works well for both cosmetic touch-ups and preventing further damage from exposed paint layers.

Each kit includes everything you need to get started. The formula is easy to apply, dries quickly, and blends with your existing rim finish for a clean result. It is a practical way to maintain your car's appearance without spending a lot of money.

Key Features and Benefits

- Pen-style applicator that makes it easy to apply paint directly to scratches and chips

• Gloss black color that blends well with most dark-colored rims for a seamless finish

• Helps prevent rust by covering exposed metal areas on your wheel surface

• Quick-drying formula that lets you complete repairs in a short amount of time

• Suitable for both small and medium-sized scratches on car rims

Who Is This For

- Car owners who want to fix curb rash and scratches on their rims at home

• Drivers who want to prevent rust and corrosion on scratched wheel surfaces

• Anyone looking for a budget-friendly alternative to professional rim refinishing

• DIY car enthusiasts who prefer simple, no-mess repair tools

Usage Scenario

Mark noticed the curb rash on his front rim after parallel parking on a narrow street. The scratch was shallow but noticeable against the glossy black finish. Instead of paying for a full wheel refinish, he used this touch-up pen to cover the damaged area. After cleaning the rim and letting the first coat dry, he applied a second layer for full coverage. The scratch became much less visible, and the rim looked clean again.

Micro Comparison

Unlike spray paints that require masking and overspray cleanup, this pen applicator gives you controlled precision for small repairs. Professional rim refinishing can cost hundreds of dollars, while this kit offers a simple home solution. It is designed for spot repairs rather than full rim repainting, making it a practical choice for everyday wear and tear.

Specifications

- Type: Pen

• Color: Gloss Black

• Vehicle Application: Car wheel rims

Package Includes

- 1 x Wheel Rim Touch Up Paint Pen

Why You Will Love It

You can fix scratches and curb rash in minutes without any special tools or experience. The pen design makes application simple and clean, so you get professional-looking results at home. It is an affordable way to keep your rims looking their best and protect them from further damage.

Questions and Answers

Question: Will this touch-up paint work on silver or grey rims?

Answer: This kit is designed for gloss black rims. It may not match silver or grey finishes exactly.

Question: Do I need to sand the rim before using the pen?

Answer: Yes, the instructions recommend using sandpaper with water to clean and smooth the scratched area before applying the paint.

Question: How long does the paint take to dry between coats?

Answer: You should wait for the first layer to dry completely before applying a second coat. This usually takes a few minutes depending on temperature and humidity.

Question: Can this cover deep scratches and curb rash?

Answer: It works best on light to moderate scratches. For deep damage, multiple coats may be needed, but deep gouges may still be visible.

Question: Is this paint waterproof after it dries?

Answer: Yes, once fully dry, the paint forms a protective layer that resists water and helps prevent rust.