Replace your faulty or dead TPMS sensors with this direct-fit tire pressure monitoring sensor. Designed for a wide range of BMW and Mercedes-Benz models, it comes pre-programmed for your specific vehicle to simplify installation and restore your tire pressure monitoring system.

This 433MHz sensor uses a long-life battery and replaces multiple OEM part numbers including 6887140-01, 36106872803, and 36106872774. It helps you maintain proper tire pressure for safer driving, better fuel economy, and extended tire life. No sensor programming is required, but activation through a scan tool or relearn procedure is needed after installation.

Each sensor is built to meet OE specifications for reliable performance. The installation process involves mounting the sensor and valve onto the rim, then mounting the tire. Professional installation is recommended to ensure correct fitting and proper system function.

Key Features and Benefits

- Pre-programmed for your specific vehicle that eliminates the need for manual programming and saves installation time

• 433MHz operating frequency that ensures reliable communication with your vehicle's TPMS system

• Battery life of about 3 years that provides long-term monitoring without frequent replacements

• Direct replacement for multiple OEM part numbers that offers broad compatibility across many BMW and Mercedes-Benz models

• Simplified relearn process using OBDII that makes activation straightforward after installation

Who Is This For

- BMW owners with a 5-Series G30, 7-Series G11, X3 G01, X5 G05, X6 G06, X7 G07, X4 G02, or iX iX3 models from 2018 onward

• Mercedes-Benz E-Class W213 owners looking for a compatible TPMS replacement sensor

• Drivers who need a pre-programmed sensor to avoid complex setup and coding

• Car owners experiencing TPMS warning lights or dead sensors who want a reliable OE-style replacement

Usage Scenario

Mark noticed his BMW X5's tire pressure warning light stayed on even after inflating all tires. A quick check confirmed one of his original TPMS sensors had failed. Instead of visiting the dealership for an expensive replacement, he ordered this pre-programmed sensor. After having his tire shop install it and perform a quick OBDII relearn, the warning light turned off, and his TPMS system started reporting accurate tire pressures again.

Micro Comparison

While generic universal TPMS sensors often require manual programming and can be tricky to set up, this sensor comes pre-programmed for your specific vehicle make and model. It matches the original equipment specifications and uses a standard 433MHz frequency, making it a straightforward replacement. The included compatibility with multiple OEM part numbers also gives you confidence it will fit your car without guesswork.

Specifications

Operating Frequency: 433MHz

Battery Life: About 3 years

Replaces Part Numbers: 6887140-01, 36106872803, 36106872774, 36106872803, 36106876955, 36106876957, 6876955-02, 6887140-02, 6887147-01, A 000 905 21 02 Q07, A0009052102, A0009052102Q02, A0009052102Q04, A0009052102Q06, A0009057105

Package Includes

1 x TPMS Tire Pressure Monitor Sensor

Why You Will Love It

You will appreciate the hassle-free installation since the sensor arrives pre-programmed for your car. The long 3-year battery life means you can install it and forget about it for years. Restoring your TPMS system gives you peace of mind on every drive, knowing your tire pressure is being monitored accurately.

Questions and Answers

Question: Does this sensor need programming before installation?

Answer: No, the sensor comes pre-programmed for your specific vehicle make and model. You only need to activate it using a scan tool or perform a relearn procedure after installation.

Question: What frequency does this TPMS sensor use?

Answer: This sensor operates at 433MHz, which is a common frequency for many BMW and Mercedes-Benz vehicles.

Question: How long does the battery last in this sensor?

Answer: The battery life is about 3 years under normal driving conditions.

Question: Which BMW models is this sensor compatible with?

Answer: It fits BMW 5-Series G30, 7-Series G11, X3 G01, X4 G02, X5 G05, X6 G06, X7 G07, iX, iX3, and Alpina XD4 models from 2018 onward. It also fits the Mercedes-Benz E-Class W213.

Question: What is the relearn procedure after installing this sensor?

Answer: The relearn procedure typically requires an OBDII tool. Some vehicles may support a no-tool relearn method depending on the model year and system.

Check your tire pressure without struggling with awkward angles. These 90 and 45 degree copper valve stems give you a straight shot at the valve on cars, motorcycles, and other vehicles with the right hub size. A simple upgrade that makes tire maintenance noticeably easier.

Filling a tire often means fighting against the wheel well or brake caliper. These angled extensions change that. The 90 degree stem works well on deep-dish wheels where a straight valve is buried. The 45 degree version offers a middle ground for tight spots that need a slight bend. Both are made from solid copper, which resists corrosion and holds up to weather and road conditions.

Installation is straightforward. Each stem screws into the existing valve hole and seals firmly. The copper construction provides a durable, long-lasting connection that stays put even on rough roads. At just 24g per stem, they add almost no weight to the wheel assembly. You get two stems in each pack, so you can outfit two wheels or keep a spare on hand.

Whether you ride a motorcycle, drive a car, or work on a utility trailer, these angled stems remove the hassle from a simple task. No more bending fingers into tight spaces or using awkward adapters just to add air. A small change that makes a big difference in everyday convenience.

Key Features and Benefits

- 90 and 45 degree angled design that provides better access to hard-to-reach tire valves

• Solid copper construction that resists rust and corrosion for long-term reliability

• Lightweight at 24g per stem that adds minimal weight to the wheel assembly

• Universal fit for vehicles with an 11.5mm hub diameter that covers most cars and motorcycles

• Two-piece set that lets you equip two wheels or keep a backup for future use

Who Is This For

- Car owners who struggle to reach tire valves on deep-dish or aftermarket wheels

• Motorcycle riders who need a cleaner angle for checking tire pressure on tight spokes

• DIY mechanics and home garage users who want a simple, permanent solution for valve access

• Trailer owners who deal with recessed valve stems that are hard to grip with standard pumps

Usage Scenario

Jake rides his motorcycle every weekend, but checking tire pressure always frustrated him. The valve sat tucked behind the brake caliper, forcing him to use a stubby adapter that never quite sealed right. He installed one 45 degree stem on the front wheel and a 90 degree on the rear. Now he fills both tires in under two minutes without fighting for space. The copper stems have held up through rain, heat, and highway miles without leaking or corroding.

Micro Comparison

Standard straight valve stems work fine on wheels with open access, but they become a hassle when the valve sits behind a caliper, spoke, or wheel well. Rubber snap-in stems are cheap but degrade over time and can leak. These copper angled stems offer a permanent, corrosion-resistant solution that puts the valve where you can reach it. The two-angle set gives you flexibility to pick the right bend for each wheel position.

Specifications

- Material: Copper

• Weight: 24g per stem

• Length: 45 degree stem - 60mm, 90 degree stem - 47mm

• Hub diameter compatibility: 11.5mm

• Package quantity: 2 pieces

Package Includes

- 1 x 90 degree valve stem

• 1 x 45 degree valve stem

Why You Will Love It

You will appreciate how much easier tire maintenance becomes when you can actually reach the valve. The copper build means these stems will outlast the tires themselves, giving you years of reliable service. It is one of those small upgrades that saves you time and frustration every single time you check your air pressure.

Questions and Answers

Question: Will these fit my car's tire valve hole?

Answer: They are designed for vehicles with a hub diameter of 11.5mm, which covers most standard car and motorcycle wheels. Measure your hub to confirm compatibility.

Question: Are these stems made of brass or copper?

Answer: They are made of solid copper, which offers strong corrosion resistance and durability compared to brass or rubber stems.

Question: Do I need any special tools to install them?

Answer: No special tools are required. They screw directly into the existing valve hole by hand or with a simple wrench.

Question: Can I use these on a truck or SUV?

Answer: They fit any vehicle with the correct 11.5mm hub diameter, so many trucks and SUVs will work. Check your wheel's hub size first.

Question: Will the 90 degree stem clear my brake caliper?

Answer: The 90 degree stem is 47mm long, which is designed to clear most calipers and spokes. Measure your clearance to be sure.

Replace your faulty tire pressure sensor with a direct-fit, pre-programmed TPMS sensor designed for 2020 Ford and Lincoln models. This 315MHz sensor comes ready to install without manual programming, helping you maintain accurate tire pressure monitoring and safer driving.

Your vehicle's Tire Pressure Monitoring System (TPMS) is a key safety feature that alerts you when tire pressure drops too low. This replacement sensor is built to match the original equipment specifications for your Ford Escape, Explorer, or Lincoln Aviator and Corsair. It arrives pre-programmed for your specific vehicle's make, model, and year, so you can skip the complicated setup steps and focus on getting back on the road.

The sensor operates at 315MHz and monitors both internal tire pressure and temperature. After installation, you will need to activate the sensor using a compatible TPMS scan tool or by following your vehicle's relearn procedure. Many Ford and Lincoln vehicles support stationary, automatic, or OBD relearn methods, making the process straightforward for most owners.

Installation is best handled by a trained professional, as it involves dismounting the tire, removing the old sensor, and mounting the new one securely. Once installed and activated, the sensor provides real-time data to your dashboard display, giving you peace of mind on every trip.

Key Features and Benefits

- Pre-programmed for specific 2020 Ford and Lincoln models that eliminates the need for manual sensor programming

• 315MHz operating frequency that ensures compatibility with your vehicle's factory TPMS system

• Monitors tire pressure and temperature that helps prevent accidents caused by underinflated or overheated tires

• Direct replacement design that matches OEM part numbers JX7T-1A180-AA and JX7Z-1A189-C for a simple swap

• Available in single or four-pack options that lets you replace all sensors at once for consistent performance

Who Is This For

- Owners of 2020 Ford Escape, Explorer, Police Interceptor Utility, Transit 150, Transit 250, or Transit 350 vehicles

• Owners of 2020 Lincoln Aviator or Lincoln Corsair vehicles needing a direct-fit TPMS replacement

• Drivers who want a pre-programmed sensor to avoid the hassle of manual programming with a separate tool

• Anyone replacing one or all four tire pressure sensors to restore full TPMS functionality

Usage Scenario

Mark noticed the TPMS warning light glowing on his 2020 Ford Explorer's dashboard after a long highway trip. A quick check showed one tire was reading significantly lower pressure than the others. Instead of visiting the dealership and waiting days for a replacement, he ordered this pre-programmed sensor. His local tire shop installed it in under thirty minutes, and after a brief OBD relearn procedure, the warning light turned off. Mark now drives with confidence knowing his TPMS is working correctly.

Micro Comparison

Unlike universal TPMS sensors that require manual programming with a separate tool, this sensor arrives pre-configured for your 2020 Ford or Lincoln model. While some aftermarket sensors force you to buy a programming device or visit a shop for activation, this unit simplifies the process by matching your vehicle's original specifications. The result is a faster installation with fewer steps and less guesswork.

Specifications

- Part Number: JX7T-1A180-AA

• Replacement Part Numbers: JX7T-1A180-AA, JX7Z-1A189-C, TPMS60, JX7T1A180AA, JX7Z1A189C

• Operating Frequency: 315MHz

• Compatible Vehicles: 2020 Ford Escape, Ford Explorer, Ford Police Interceptor Utility, Ford Transit 150, Ford Transit 250, Ford Transit 350, Lincoln Aviator, Lincoln Corsair

Package Includes

- 1 or 4 Tire Pressure Sensors (depending on selection)

Why You Will Love It

You no longer need to worry about a sudden TPMS warning light disrupting your daily drive. This sensor is pre-programmed for your vehicle, so installation is quick and straightforward. Replacing a worn sensor restores an important safety system that helps you catch low tire pressure before it becomes a bigger problem.

Questions and Answers

Question: Does this sensor come pre-programmed for my 2020 Ford Explorer?

Answer: Yes, this sensor is pre-programmed specifically for your 2020 Ford Explorer. You will not need to program it manually.

Question: Can I install this TPMS sensor myself?

Answer: Installation requires dismounting the tire and mounting the sensor to the rim. It is recommended to have a trained professional handle the installation.

Question: What do I need to do after installing the new sensor?

Answer: After installation, you need to activate the sensor using a compatible TPMS scan tool or by following your vehicle's relearn procedure. This can be a stationary, automatic, or OBD relearn depending on your model.

Question: Will this sensor work on a 2020 Lincoln Aviator?

Answer: Yes, this sensor is compatible with the 2020 Lincoln Aviator. It matches the OEM part numbers listed for that vehicle.

Question: How do I know if this sensor fits my car?

Answer: Check your existing part number against the list provided. If your part number matches JX7T-1A180-AA, JX7Z-1A189-C, TPMS60, JX7T1A180AA, or JX7Z1A189C, this sensor will work with your vehicle. You can also verify by checking your car's VIN, model, and year.

Keep your tire pressure accurately monitored with this set of 4 direct-fit TPMS sensors. Designed for a wide range of Chrysler, Dodge, Jeep, and Fiat vehicles, these 433MHz sensors replace multiple OEM part numbers including 56029398AB and 68241067AA. Each sensor comes pre-programmed and ready to install, helping you maintain proper tire inflation for safer driving and better fuel economy.

These tire pressure sensors are built as a direct replacement for the original equipment on your vehicle. They operate at the standard 433MHz frequency and are designed to communicate seamlessly with your car's onboard TPMS system. When tire pressure drops below the recommended level, the sensor sends a signal to trigger the dashboard warning light, so you know exactly when to add air.

Each sensor features a long-lasting battery with an expected life of about 5 years under normal driving conditions. This means you can install them and enjoy reliable performance for many miles before needing a replacement. The sensors are sold as a complete set of 4, covering all your wheels at once for a consistent and hassle-free upgrade.

To ensure a proper fit, always verify your vehicle's year, make, model, and trim against the compatibility list. Cross-reference your original part number with the numbers listed to confirm the match. If you have any questions about fitment, you can contact us before purchasing for a quick verification.

Key Features and Benefits

- Direct replacement design that fits multiple Chrysler, Dodge, Jeep, and Fiat models for easy installation

• 433MHz operating frequency that works with your vehicle's existing TPMS system for accurate pressure monitoring

• Long-life battery rated for approximately 5 years to reduce the need for frequent replacements

• Set of 4 sensors included so you can replace all tires at once for consistent performance

• Pre-programmed to match OEM specifications for a plug-and-play installation experience

Who Is This For

- Drivers of Chrysler 300, Town & Country, Voyager, or Grand Voyager models from 2010 to 2021

• Owners of Dodge Durango, Grand Caravan, Journey, or Charger vehicles needing a TPMS sensor replacement

• Jeep Grand Cherokee and Wrangler owners looking for a cost-effective sensor upgrade

• Fiat 500, 500L, and Freemont drivers who need a direct-fit 433MHz sensor set

Usage Scenario

Mark noticed his Dodge Grand Caravan's tire pressure warning light flickering on during a morning commute. After checking each tire with a gauge, he found the pressure was fine but the light stayed on. He ordered this 4-pack of TPMS sensors and replaced all four in one afternoon using basic tools. The warning light turned off immediately after installation, and now he gets accurate pressure readings every time he starts the engine.

Micro Comparison

Unlike generic universal sensors that require complex programming or adapters, these sensors are designed as a direct replacement for your original equipment. They match the exact OEM specifications for your Chrysler, Dodge, Jeep, or Fiat vehicle, so you can install them without special tools or dealer visits. This saves you time and money compared to getting replacements from the dealership.

Specifications

Condition: 100% Brand New

Battery Life: About 5 Years

Operating Frequency: 433MHz

Manufacturer Part Number: 56029398AB

Interchange Part Numbers: 56029398AB, 68241067AA, 68241067AB, 56029398AA, 68402371AA, 68464665AA, 68406537AA, 53104671

Package Includes

- 4 x Tire Pressure Sensor

Why You Will Love It

You will love the peace of mind that comes from knowing your tire pressure is always being monitored accurately. This set saves you from expensive dealer replacements and gives you a complete solution for all four wheels at once. With a battery life of about 5 years, you can install them and forget about TPMS issues for years to come.

Questions and Answers

Question: Will these sensors work on my 2014 Jeep Grand Cherokee?

Answer: Yes, the Jeep Grand Cherokee from 2010 to 2015 for the US market and 2011 to 2019 for the European market is compatible with these sensors.

Question: Do I need to program these sensors before installation?

Answer: These sensors come pre-programmed to match OEM specifications for the listed vehicles. They are designed for direct installation without additional programming.

Question: How long does the battery last in these sensors?

Answer: The battery is rated for about 5 years under normal driving conditions.

Question: What is the operating frequency of these TPMS sensors?

Answer: These sensors operate at 433MHz, which is the standard frequency for the compatible vehicles listed.

Question: Can I use these sensors on a 2015 Dodge Durango?

Answer: Yes, the Dodge Durango from 2011 to 2015 for the US market and 2011 to 2020 for the European market is compatible with this sensor set.

Keep your tire pressure monitoring system working reliably with this set of four pre-programmed TPMS sensors. Designed for a wide range of Chrysler, Dodge, Jeep, and Fiat vehicles, these 433MHz sensors replace OEM part numbers 56029398AB and 56029398AA. They come ready to install and require only a simple relearn procedure using an OBDII scan tool.

These sensors are 100% brand new and factory tested before shipping. Each unit is built to last with a battery life of approximately 3 to 5 years, giving you long-term peace of mind. The sensors are pre-programmed for your specific vehicle make, model, and year, so no additional programming is needed before installation.

Installation is straightforward for a trained professional. After mounting the sensors in your tires, use an OBDII scan tool to perform the relearn process. This activates the sensors and synchronizes them with your vehicle's TPMS system. For best results, have your installer scan the sensors before installation to confirm they are reading correctly.

Monitoring your tire pressure helps improve fuel efficiency, extends tire life, and enhances overall driving safety. With these direct-fit TPMS sensors, you can restore your vehicle's factory tire pressure monitoring function quickly and affordably.

Key Features and Benefits

- Pre-programmed for specific vehicle models that eliminates the need for manual programming before installation

• 433MHz operating frequency that ensures compatibility with your vehicle's TPMS receiver

• Factory tested before shipping that guarantees each sensor is working correctly out of the box

• Battery life of 3 to 5 years that provides reliable long-term performance without frequent replacements

• Replaces OEM part numbers 56029398AB and 56029398AA that makes it a direct fit for many Chrysler, Dodge, Jeep, and Fiat models

Who Is This For

- Owners of compatible Chrysler, Dodge, Jeep, or Fiat vehicles needing to replace faulty or dead TPMS sensors

• Drivers who want to restore their factory tire pressure monitoring system without visiting a dealership

• Mechanics and auto shops looking for a reliable, pre-programmed TPMS sensor set for customer repairs

• Anyone preparing for winter or summer tire changes who wants to install fresh sensors in their spare set of wheels

Usage Scenario

Mark noticed the tire pressure warning light on his 2013 Dodge Grand Caravan had been on for weeks. After checking his tires and finding no leaks, he knew the TPMS sensors were likely dead. He ordered this 4-pack, had his local tire shop install them during a routine tire rotation, and the technician used an OBDII tool to run the relearn procedure. The warning light turned off immediately, and Mark now sees accurate pressure readings on his dashboard again.

Micro Comparison

Unlike universal TPMS sensors that require complex programming and cloning, these sensors come pre-programmed for your specific vehicle. This saves you time and reduces the risk of compatibility issues. While some aftermarket sensors may need a special tool to set the correct frequency, these 433MHz units are ready to activate with a standard OBDII scan tool.

Specifications

Material: TPMS Tire Pressure Sensor

Frequency: 433MHz

Part Number: 56029398AB, 56029398AA

Battery Life: About 3 to 5 Years

Condition: 100% Brand New

Package Includes

- 4 x Tire Pressure Sensor

Why You Will Love It

No need to visit a dealership or pay for expensive programming. These sensors are pre-set for your car and just need a quick relearn to start working. Restoring your TPMS system improves safety and helps you avoid uneven tire wear or reduced fuel economy. With a battery life of several years, this is a smart, cost-effective replacement.

Questions and Answers

Question: How do I know if these sensors fit my vehicle?

Answer: Check your vehicle's year, make, and model against the compatibility list. Also verify your OEM part number is 56029398AB or 56029398AA. If unsure, send us your VIN or a photo of your old sensor before ordering.

Question: Do I need to program these sensors before installing them?

Answer: No. These sensors are pre-programmed for your vehicle. After installation, you only need to activate them using an OBDII scan tool with a relearn function.

Question: What should I do before installing the sensors on my car?

Answer: Ask your installer to scan the sensors with a TPMS tool first. This confirms the tool can read the sensor ID, frequency, tire pressure, and battery status. It helps avoid unnecessary installation fees if a sensor is defective.

Question: How long do the batteries last in these sensors?

Answer: The battery life is approximately 3 to 5 years, depending on usage and driving conditions.

Question: What if the TPMS warning light stays on after installation?

Answer: First, make sure the relearn procedure was completed correctly with an OBDII tool. If the light remains on, check that all four sensors are installed and functioning. Contact us for further troubleshooting help if needed.

The GANGLE TPMS sensor is a direct replacement for your 2007-2018 Toyota Sienna, Tundra, or Sequoia. It operates at 315MHz and matches the OEM part numbers 42607-0C080 and 42607-0C060. This sensor comes pre-programmed for your specific vehicle, so no additional programming is needed before installation.

Maintaining proper tire pressure is essential for safety and fuel efficiency. This sensor continuously monitors your tire's air pressure and alerts you if the pressure drops too low. It helps you avoid uneven tire wear and potential blowouts on the road.

Installation is straightforward for a trained professional. The sensor is designed to be a direct fit for your Toyota model. Once installed, you will need to perform a relearn procedure using an OBDII tool to sync the sensor with your vehicle's system.

This sensor is built for long-term reliability with a battery life of about 3 years. It is a cost-effective way to restore your TPMS system to full working order without visiting a dealership.

Key Features and Benefits

- Pre-programmed sensor that fits your Toyota model, so you can install it without complex setup

• 315MHz operating frequency that matches your vehicle's original system, ensuring accurate communication

• Direct replacement for OEM part numbers 42607-0C080 and 42607-0C060, making it easy to find the right part

• Battery life of about 3 years, providing reliable long-term performance

• Simplified relearn process using an OBDII tool, saving you time during installation

Who Is This For

- Toyota Sienna owners (2007-2018) who need to replace a faulty or dead TPMS sensor

• Toyota Tundra owners (2007-2018) looking for an affordable replacement sensor

• Toyota Sequoia owners (2008-2018) who want to restore their tire pressure monitoring system

• DIY mechanics or professional installers who need a pre-programmed sensor for quick replacement

Usage Scenario

Mark noticed the tire pressure warning light on his 2015 Toyota Tundra was staying on, even after checking and inflating all tires. He knew one of the TPMS sensors had failed. Instead of paying a dealership premium, he ordered this replacement sensor. After a quick trip to his local tire shop for mounting and a simple OBDII relearn, the warning light turned off. Now Mark drives with confidence, knowing his tire pressure is being monitored correctly.

Micro Comparison

This GANGLE sensor is a direct replacement for the original Toyota part at a fraction of the cost. Unlike universal sensors that require programming for each vehicle, this one comes pre-programmed for your specific Toyota model, saving you time and effort. It offers the same 315MHz frequency and fitment as the OEM sensor without the high price tag.

Specifications

- Material: Tyre pressure sensor

• Model Number: 42607-0C080

• OEM Number: 42607-0C080, 42607-0C060

• Operating Frequency: 315MHz

• Battery Life: About 3 years

Package Includes

- 1 x TPMS Sensor

Why You Will Love It

You will love the peace of mind that comes with a fully functioning TPMS system. This sensor helps you maintain proper tire pressure, which improves fuel economy and extends tire life. It is a simple, affordable fix that keeps your Toyota safe and reliable on every drive.

Questions and Answers

Question: Does this sensor need to be programmed before installation?

Answer: No, this sensor comes pre-programmed for your specific Toyota model. You just need to install it and perform a relearn procedure.

Question: What is the operating frequency of this sensor?

Answer: It operates at 315MHz.

Question: How do I complete the relearn process after installing the sensor?

Answer: You will need an OBDII tool to perform the relearn procedure. This syncs the new sensor with your vehicle's system.

Question: How long does the battery in this sensor last?

Answer: The battery lasts about 3 years under normal use.

Question: Will this sensor fit my 2010 Toyota Sequoia?

Answer: Yes, this sensor fits Toyota Sequoia models from 2008 to 2018. Please check your vehicle's compatibility before ordering.

Keep your tire valves clean and protected with this set of 40 chrome plastic valve caps. Each cap includes a built-in O-ring to create a tight seal, helping to prevent dust, dirt, and moisture from reaching the valve stem. These universal caps fit most standard tire valves on cars, bicycles, trucks, and motorcycles.

Made from durable plastic with a chrome electroplated finish, these caps add a clean, polished look to any vehicle. The simple screw-on design makes installation quick and easy with no tools required. With 40 pieces in one pack, you have plenty of spares for multiple vehicles or to replace lost caps.

Each cap works by screwing securely onto the valve stem. The rubber O-ring inside each cap helps hold it in place and provides a protective seal against the elements. This basic maintenance accessory helps keep your valves in better condition over time.

Key Features and Benefits

- Set of 40 valve caps that gives you enough spares for multiple vehicles or to replace lost caps

• Chrome electroplated finish that adds a clean, shiny appearance to your tire valves

• Built-in rubber O-ring that helps create a tight seal against dust and moisture

• Universal fit that works on standard tire valves for cars, bicycles, trucks, and motorcycles

• Easy screw-on installation that requires no tools and takes just seconds per cap

• Durable plastic construction that resists everyday wear and exposure to the elements

Who Is This For

- Car owners who want to keep valve stems clean and prevent dust buildup

• Cyclists looking for a simple way to protect bicycle tire valves from dirt and moisture

• Truck or motorcycle owners who need a bulk pack of spare valve caps for multiple vehicles

• Anyone who frequently loses valve caps and wants a large supply on hand

Usage Scenario

Mark noticed that the valve caps on his family's two cars and his bicycle were constantly getting lost. After a few weeks, the exposed valve stems collected dust and grime. He ordered this 40-pack of chrome valve caps with O-rings. He put four caps on each car and two on his bike, then stored the rest in his glove compartment as backups. Now, whenever a cap goes missing, he simply grabs a spare and screws it on in seconds. The chrome finish matches the wheels nicely, and the O-rings keep everything snug.

Micro Comparison

Compared to basic plastic caps without O-rings, these caps include a rubber seal that helps hold them in place and block out dirt. While metal caps can sometimes seize or corrode onto the valve stem, these chrome plastic caps are lightweight and easy to remove by hand. The 40-piece quantity also gives you better value than buying smaller packs.

Specifications

- Material: Plastic with chrome electroplated finish

• Quantity: 40 pieces

• Design: Screw-on with rubber O-ring

• Compatibility: Standard tire valves on cars, bicycles, trucks, and motorcycles

Package Includes

- 40 x Tire valve caps with O-ring

Why You Will Love It

You will appreciate having a generous supply of valve caps that fit nearly any vehicle you own. The chrome finish gives a subtle upgrade to your wheels, while the O-rings keep each cap securely in place. It is a small, affordable accessory that helps maintain your tires and prevents messy valve stems.

Questions and Answers

Question: Will these fit standard car tire valves?

Answer: Yes, these caps fit most standard Schrader valves found on cars, trucks, motorcycles, and bicycles.

Question: Do the O-rings help prevent air leaks?

Answer: The O-rings are designed to create a dust and moisture seal, not to stop air leaks. They help keep the cap tight but do not affect tire pressure.

Question: Are these caps made of real chrome metal?

Answer: No, they are plastic with a chrome electroplated finish. They look shiny like metal but are lightweight and easy to remove.

Question: Can I use these on a bicycle with Presta valves?

Answer: These caps are designed for Schrader valves, which are common on cars and many bicycles. Presta valves are narrower and may not fit securely.

Question: How do I install them?

Answer: Simply screw each cap onto the valve stem by hand until it is snug. No tools are needed.

Give your vehicle a custom look while protecting your tire valves from dirt and moisture. These grenade-shaped valve stem caps are made from high-strength aluminum alloy and fit most cars, trucks, SUVs, motorcycles, and bicycles. A simple upgrade that adds style and function in seconds.

These valve caps are machined from 6063 aluminum using CNC technology for a precise fit and long-lasting durability. Each cap screws directly onto your existing tire valve stem, creating a tight seal that keeps out dust, debris, and air contaminants. The threaded interior grips the valve firmly so the cap stays secure even at highway speeds.

Available in six eye-catching colors, you can match your vehicle's paint, wheels, or accessories. The compact grenade shape gives your tires a rugged, performance-inspired appearance without adding bulk. Each pack includes four caps, enough for one full set of tires, with a spare for your spare tire or a friend.

Installation takes less than a minute with no tools required. Simply unscrew your old plastic valve caps and thread these aluminum caps on by hand until snug. The corrosion-resistant aluminum holds up against rain, road salt, and UV exposure, keeping your valves protected season after season.

Key Features and Benefits

- CNC-machined 6063 aluminum alloy construction that resists corrosion and daily wear

• Grenade-shaped design that gives your tires a bold, custom appearance

• Universal fit that works on most car, truck, SUV, motorcycle, and bicycle valve stems

• Six color choices that let you personalize your ride or match existing accents

• Threaded interior that creates a dust-tight seal to keep valve cores clean and functional

Who Is This For

- Car owners who want a quick visual upgrade without spending much

• Truck and SUV drivers looking for durable metal valve caps that handle rough conditions

• Motorcycle and bicycle riders who need compact caps that won't interfere with spokes

• Anyone replacing cracked or missing plastic valve caps with something more reliable

Usage Scenario

Mike noticed his factory plastic valve caps were cracking after a harsh winter. He ordered a set of these aluminum grenade caps in silver to match his truck's wheels. He replaced all four caps in about two minutes. Now his valve stems stay clean and the caps add a subtle custom touch every time he walks up to his truck.

Micro Comparison

Standard plastic valve caps can crack, fade, or fall off over time. These aluminum caps are machined from solid 6063 alloy, so they hold up better against weather and road debris. The threaded design also seals more tightly than push-on caps, keeping dirt and moisture away from your valve core.

Specifications

Material: 6063 aluminum alloy

Color options: black, red, blue, silver, gold, green

Quantity: 4 caps per pack

Package Includes

- 4 x Tire valve caps

Why You Will Love It

These caps are a small upgrade with a big visual payoff. You get the durability of machined aluminum and the freedom to pick a color that fits your style. They screw on in seconds and stay put mile after mile.

Questions and Answers

Question: Will these fit my car's tire valves?

Answer: Yes, these caps fit standard Schrader valves found on most cars, trucks, SUVs, motorcycles, and bicycles.

Question: Do these caps have an O-ring inside for a better seal?

Answer: The caps use a threaded metal-to-metal fit. The threads grip the valve stem tightly to keep out dust and debris.

Question: Can I use these on my motorcycle?

Answer: Yes, they fit standard motorcycle valve stems. The compact shape does not interfere with spokes or brake rotors.

Question: How do I choose the right color?

Answer: Pick a color that matches your vehicle's paint, wheels, or trim. The caps are available in black, red, blue, silver, gold, and green.

Question: Will these caps rust or corrode?

Answer: No, the caps are made from aluminum alloy, which naturally resists rust and corrosion from rain, road salt, and UV exposure.

Give your Nissan a subtle upgrade with a set of metal tire valve caps that add style and practical protection. These four valve stem covers are designed to fit a wide range of Nissan models including X-trail, Qashqai, Note, Juke, Sentra, Patrol, Navara, and Micra.

Made from aluminum alloy with an electroplating finish, these caps are built to resist corrosion and everyday wear. The glue dripping process helps create a secure fit, keeping the caps firmly in place while you drive. Each cap screws on easily over your existing tire valve stem.

Beyond the look, these caps serve a real purpose. They help keep dirt, dust, and moisture out of your valve stems, which can reduce the risk of slow air leaks. With four caps in the set, you can outfit your entire vehicle at once.

Choose from multiple color options to match your car's style or add a small accent. Whether you prefer a classic black, a bold red, a sleek silver, or a cool blue, there is a finish to suit your taste.

Key Features and Benefits

- Aluminum alloy construction that resists rust and corrosion for long-lasting use

• Electroplating finish that provides a smooth, polished look on your wheels

• Simple screw-on design that lets you install each cap in seconds without tools

• Universal fit that works on most car, motorcycle, and bicycle tire valves

• Set of four caps that covers all wheels on a standard passenger vehicle

Who Is This For

- Nissan owners who want a factory-style accessory that matches their vehicle

• Drivers looking for a quick and inexpensive way to dress up their wheels

• Anyone who wants to protect their tire valves from dirt, moisture, and debris

Usage Scenario

Mark noticed his old plastic valve caps were cracked and letting dust into the stems. He ordered this set of metal caps for his Nissan Qashqai. Within five minutes, he had screwed all four caps onto his tires. The red finish added a sporty touch, and he felt more confident that his tire valves were sealed against road grime.

Micro Comparison

Plastic valve caps can crack or loosen over time, especially in extreme weather. Metal caps offer better durability and a more premium feel. These aluminum alloy caps also include an electroplating finish that resists fading, so they keep their look longer than basic plastic options.

Specifications

Material: Aluminum Alloy

Color: Black, Red, Silver, Blue

Quantity: 4 pieces per set

Process: Electroplating and glue dripping

Package Includes

- 4 x Car Tire Valve Caps

Why You Will Love It

These valve caps are a small upgrade that makes a noticeable difference. They protect your tire valves, add a custom touch to your wheels, and install in seconds. It is an easy way to care for your car and give it a cleaner, more finished appearance.

Questions and Answers

Question: Will these caps fit my Nissan Rogue?

Answer: Yes, these valve caps fit standard tire valves found on most Nissan models, including the Rogue.

Question: Do these caps prevent air from leaking out?

Answer: They help keep dirt and debris out of the valve stem, which can reduce the chance of slow leaks. They do not replace the valve core itself.

Question: Are these caps easy to remove when I need to add air?

Answer: Yes, they screw on and off just like standard valve caps. No tools are needed.

Question: Which color matches the factory Nissan wheels best?

Answer: Silver is a close match to most factory wheel finishes. Black also blends well with darker wheels.

Question: Can I use these on my motorcycle?

Answer: Yes, they fit standard tire valve stems on motorcycles and bicycles as well.

Maintain proper tire pressure and drive with confidence using this direct-fit TPMS tire pressure sensor for your KIA Sportage. This sensor replaces multiple OEM part numbers including 52933-D9100, 52933-D4100, and 52933-F2000, making it a reliable solution for many 2015-2021 KIA and Hyundai models.

This tire pressure sensor is pre-programmed for your specific vehicle make, model, and year, so no additional programming is needed before installation. It operates at 433MHz frequency and comes with a battery life of about 3 years, giving you long-term peace of mind on the road.

Installation requires a simple relearn procedure using an OBDII tool after mounting. The sensor is made from durable metal, rubber, and plastic components designed to withstand road conditions. We recommend having a trained professional handle the installation for best results.

If you are unsure about compatibility, send us your VIN code before ordering and we will confirm fitment for your vehicle.

Key Features and Benefits

- Pre-programmed sensor that eliminates the need for manual programming before installation

• 433MHz operating frequency that ensures reliable communication with your vehicle's TPMS system

• About 3 years of battery life that reduces the frequency of sensor replacements

• Made from metal, rubber, and plastic materials that provide durability in various driving conditions

• Direct fit design that matches OEM specifications for a straightforward installation process

Who Is This For

- Owners of 2015-2021 KIA Sportage models needing a TPMS sensor replacement

• Drivers of compatible Hyundai models including Elantra, Grandeur, I30, Ioniq, and Kona

• KIA Niro and Optima owners from model years 2015 to 2021

• Genesis G90 owners with vehicles manufactured between April 2017 and April 2023

Usage Scenario

Mark noticed the TPMS warning light on his 2018 KIA Sportage dashboard had been on for days. After checking the tire pressure manually, he realized one of his sensors had stopped working. He ordered this replacement sensor, had it installed at a local tire shop, and the relearn process took less than 10 minutes using an OBDII tool. Now his dashboard shows accurate tire pressure readings again, and he feels safer on his daily commute.

Micro Comparison

Unlike universal TPMS sensors that require complex programming and may not communicate correctly with your vehicle's system, this sensor comes pre-programmed for your specific make and model. It matches OEM part numbers like 52933-D9100 and 52933-D4100, so you get a direct fit without the guesswork. The simple OBDII relearn procedure makes activation straightforward compared to sensors that need specialized dealer equipment.

Specifications

Material: Metal, rubber, and plastic

Model Number: 52933-D4100

OEM Numbers: 52933-F2000, 52933F2000

Operating Frequency: 433MHz

Battery Life: About 3 years

Package Includes

- 1 x TPMS tire pressure sensor

Why You Will Love It

You will appreciate the peace of mind that comes from knowing your tire pressure is accurately monitored. This sensor saves you time and money by being pre-programmed and easy to install, so you can get back on the road quickly without a trip to the dealership.

Questions and Answers

Question: Does this TPMS sensor need programming before installation?

Answer: No, the sensor comes pre-programmed specifically for your vehicle make, model, and year. You only need to activate it using a scan tool or perform a relearn procedure after installation.

Question: What is the operating frequency of this sensor?

Answer: This TPMS sensor operates at 433MHz, which is the standard frequency used by most KIA and Hyundai vehicles.

Question: How long does the battery last in this sensor?

Answer: The battery life is approximately 3 years under normal driving conditions.

Question: Can I install this sensor myself?

Answer: Installation involves dismounting and remounting the tire, which requires a tire changer and proper tools. We recommend having a trained professional perform the installation. The relearn procedure requires an OBDII tool.

Question: How do I perform the relearn procedure after installing the sensor?

Answer: Inflate all tires to the correct pressure, read the sensor IDs using a TPMS tool, connect the tool to your vehicle's OBDII port, turn the ignition on, and follow the prompts on the tool until the relearn is successful.

Question: Will this sensor fit my 2016 KIA Optima?

Answer: Yes, this sensor is compatible with the KIA Optima from September 2015 to September 2021. If you are unsure about your specific vehicle, please send us your VIN code to confirm fitment before ordering.

Give your Suzuki vehicle a clean, custom look with these durable aluminum alloy tire valve caps. Designed to fit a wide range of Suzuki models, these small accessories protect your tire valves from dust, moisture, and debris while adding a subtle color accent to your wheels.

These valve stem covers are built from lightweight aluminum alloy, making them both strong and resistant to pressure. Each cap features a complete O-ring seal that helps keep water, snow, and dirt out of the tire valve, which can help extend the life of your tires. With five color options available, you can match or contrast your vehicle's style easily.

Regular replacement is recommended to prevent oxidation or adhesion from sun exposure. These caps are simple to install and fit most standard tire valves, making them a practical upgrade for daily drivers or project cars.

Key Features and Benefits

- Aluminum alloy construction that is hard and durable, so the shape stays intact even under pressure

• Complete O-ring seal that prevents water, snow, and dust from entering the tire, helping to maintain tire pressure and prolong tire life

• Lightweight design at only 1g per cap, so they do not affect wheel balance or driving performance

• Available in multiple colors including Black, Red, Blue, Yellow, and Grey, letting you personalize your vehicle's look

• Simple screw-on installation that requires no tools, making it a quick and easy upgrade

Who Is This For

- Suzuki owners who want to protect their tire valves from dirt and moisture

• Car enthusiasts looking for a small, affordable way to add a color accent to their wheels

• Drivers who want a simple maintenance upgrade that helps extend tire service life

Usage Scenario

Tom noticed his tire valve caps were starting to crack after a long summer of direct sunlight. He decided to replace them with these aluminum alloy caps in blue to match his Suzuki Swift. After screwing them on, he liked how they sealed tightly and gave his wheels a cleaner look. A few weeks later during a rainy week, his tire pressure remained stable, and he felt confident the caps were doing their job.

Micro Comparison

Unlike plastic valve caps that can crack or fade over time, these aluminum alloy caps are more resistant to pressure and sun damage. The built-in O-ring seal also offers better protection against moisture and dust compared to basic caps without a seal. For the price of a coffee, you get a set of durable, color-matched caps that add both function and style.

Specifications

Material: Aluminium alloy

Color: Black, Red, Blue, Yellow, Grey

Size: 1.03 x 1.58 x 0.92 cm / 0.41 x 0.62 x 0.36 in

Weight: 1g per cap

Please allow 1-3 mm / 0.04-0.12 in difference due to manual measurement.

Package Includes

- 4 x Colored aluminum alloy valve caps

Why You Will Love It

These valve caps give your Suzuki a touch of personality without breaking the bank. They are a simple, functional upgrade that helps keep your tires in better shape while making your wheels stand out. Easy to install and built to last, they are a small detail that makes a real difference.

Questions and Answers

Question: Will these valve caps fit my Suzuki Jimny?

Answer: Yes, these caps are designed to fit most standard tire valves and are compatible with Suzuki models including Jimny, Swift, Vitara, SX4, Samurai, and Alto.

Question: How do I install these valve caps?

Answer: Simply unscrew your old valve caps and screw these on by hand until snug. No tools are needed.

Question: Can I use these caps in rainy or snowy weather?

Answer: Yes, the O-ring seal helps keep water, snow, and dust out of the tire valve, making them suitable for all weather conditions.

Question: How often should I replace these valve caps?

Answer: It is recommended to replace them monthly to avoid oxidation or adhesion caused by direct sunlight, but many users find they last longer with proper care.

Question: Do these caps affect tire pressure?

Answer: No, they are lightweight and designed to seal tightly without affecting tire pressure. The O-ring helps maintain a secure seal.

This tubeless valve and dust cap set offers a straightforward solution for maintaining tire pressure on motorcycles, cars, bicycles, and other vehicles. Designed for tubeless rims or rims with a tubeless conversion, it provides a reliable seal to keep your tires performing as expected.

Built from brass and rubber, this valve is made to withstand regular use. The included dust cap protects the valve core from dirt and debris, helping to prevent leaks and extend the life of the valve. It is an easy-to-carry and simple-to-use replacement part for your vehicle maintenance kit.

This set includes one tubeless valve and one dust cap in a silver finish. It is specifically designed to work in tubeless rims that use tubeless liquid sealant, ensuring a proper fit and function for your specific setup.

Key Features and Benefits

- Brass and rubber construction that offers a durable and reliable seal for long-term use

• Compact size at 3.2 cm x 1.1 cm / 1.3 in x 0.4 in that makes it easy to carry and store in your vehicle

• Includes a dedicated dust cap that protects the valve from dirt and moisture to prevent potential leaks

• Designed for tubeless rims that provides stable characteristics for consistent tire pressure

• Versatile fit for motorcycles, motorbikes, cars, and bicycles that covers a wide range of vehicles

Who Is This For

- Motorcycle owners looking for a reliable replacement valve for their tubeless rims

• Car drivers who need a spare valve and dust cap for emergency roadside repairs

• Bicycle enthusiasts maintaining bikes with tubeless conversions or tubeless rims

• DIY mechanics who prefer to keep essential tire maintenance parts on hand

Usage Scenario

Mark was preparing for a weekend motorcycle trip when he noticed a slow leak in his rear tire. He checked the valve and found the old dust cap was cracked, letting in grit. He replaced it with this brass and rubber tubeless valve set, securing the new dust cap tightly. The next morning, his tire pressure held steady, and he completed his 200-mile ride without any issues.

Micro Comparison

Unlike generic plastic valves that can become brittle over time, this set uses a brass core and rubber base for a more secure fit. The included dust cap adds an extra layer of protection that many basic replacement valves do not offer, making it a more complete solution for maintaining your tire system.

Specifications

- Material: Brass + Rubber

• Color: Silver

• Size: 3.2 cm x 1.1 cm / 1.3 in x 0.4 in (Length x Diameter)

• Quantity: 1 Piece

Package Includes

- 1 x Tubeless Valve

• 1 x Dust Cap

Why You Will Love It

This simple upgrade gives you confidence that your tire valves are secure and protected from the elements. It is a small, affordable part that plays a big role in keeping your rides smooth and worry-free.

Questions and Answers

Question: Will this valve work on a standard car tire?

Answer: Yes, it fits cars with tubeless rims that use liquid sealant.

Question: Does the dust cap screw on tightly?

Answer: Yes, the dust cap screws on securely to keep out dirt and moisture.

Question: Is this valve compatible with all motorcycle tubeless rims?

Answer: It is designed for tubeless rims, but you should confirm your rim uses tubeless liquid sealant for proper function.

Question: What is the valve made of?

Answer: The valve body is brass, and the base is rubber for a tight seal.

Question: Can I use this on a bicycle with tubeless tires?

Answer: Yes, it works on bicycles that have tubeless rims and use liquid sealant.

Replace your faulty tire pressure sensors with a set of four pre-programmed 315MHz TPMS sensors designed for select Ford vehicles. These direct replacement sensors come ready to install, helping you restore your tire pressure monitoring system without complex programming.

Proper tire pressure is essential for safe driving and fuel efficiency. These TPMS sensors monitor the internal pressure and temperature of your tires, providing you with critical information while you drive. When a tire loses pressure, the system alerts you immediately, helping you avoid potential tire failure and traffic accidents.

Each sensor is manufactured as a brand new, high-quality replacement part. The sensors are pre-programmed specifically for your vehicle's make, model, and year, so no sensor programming is required before installation. You only need the right scan tool or a re-learning procedure to activate them after installation.

Installation is straightforward for trained professionals. Three common re-learning methods are available depending on your vehicle: stationary relearn, automatic relearn by driving, or OBD relearn that writes sensor IDs directly to the TPMS module. Always consult your owner's manual for the specific procedure required for your vehicle.

Key Features and Benefits

- Pre-programmed for your vehicle that eliminates the need for sensor programming before installation

• 315MHz operating frequency that ensures compatibility with your Ford's TPMS system

• Direct replacement design that fits exactly like the original part

• Real-time tire pressure and temperature monitoring that helps prevent accidents caused by tire failure

• Brand new manufacturing that provides reliable performance and long service life

Who Is This For

- Ford Edge owners with vehicles manufactured between January 2011 and May 2015

• Drivers experiencing TPMS warning lights due to failed or dying sensors

• Vehicle owners who want to restore their factory tire pressure monitoring system

• Professional mechanics and DIY enthusiasts looking for a direct replacement TPMS solution

Usage Scenario

Mark noticed his Ford Edge's TPMS warning light had been on for weeks. After checking his tire pressures manually and finding them all correct, he realized the sensors themselves had failed. He ordered this set of four pre-programmed sensors, had his local tire shop install them during a routine tire rotation, and the technician completed the OBD relearn procedure in under five minutes. Now Mark's dashboard shows accurate tire pressures again, giving him peace of mind on his daily commute and long highway drives.

Micro Comparison

While some TPMS sensors require complex programming or cloning procedures, these sensors come pre-programmed for your specific Ford model. This saves you time and reduces the risk of compatibility issues. The direct replacement design means you can install them using standard procedures without modifications or adapters.

Specifications

- Manufacturer Part Number: DE8T-1A180-AA, DE8T1A180AA

• Replacement Part Numbers: 9L3T-1A180-BB, CM5T-1A180-AA, 9L3Z-1A189-A, DE8T-1A180-AA, TPMS-12, 9L3T-1A180-AE, CM5T1A180AA, 9L3Z1A189A, ZZDA37140, 9L3Z-1A189-A, DE8T-1A150-AA

• Operating Frequency: 315MHz

• Condition: Brand New

• Fitment Type: Direct Replacement

• Color: As shown in pictures

Package Includes

- 4 x Tire Pressure Sensor

Why You Will Love It

Restoring your TPMS system means one less warning light on your dashboard and one more safety feature working for you. These pre-programmed sensors simplify the replacement process, saving you the hassle of programming or cloning. Drive with confidence knowing your tire pressure is being monitored automatically.

Questions and Answers

Question: Do these sensors require programming before installation?

Answer: No, these sensors come pre-programmed for your specific vehicle make, model, and year. You only need to activate them using a scan tool or a re-learning procedure after installation.

Question: How do I know if these sensors fit my Ford Edge?

Answer: These sensors fit Ford Edge vehicles manufactured between January 2011 and May 2015. Check your vehicle's manufacture date on the driver's side door jamb sticker to confirm compatibility.

Question: What is the operating frequency of these sensors?

Answer: These sensors operate at 315MHz frequency, which is compatible with the TPMS systems in the listed Ford vehicles.

Question: Can I install these sensors myself?

Answer: Installation of TPMS sensors is recommended to be performed only by trained professionals. The sensors need to be mounted inside the tire, and the vehicle may require a re-learning procedure after installation.

Question: What if my existing part number does not match the numbers listed?

Answer: If your existing part number does not match one of the listed replacement numbers, the sensor will not work with your vehicle. Please verify your part number matches before purchasing.

Question: How do I activate the sensors after installation?

Answer: There are three common methods: stationary relearn by placing the vehicle in learn mode, automatic relearn by driving, or OBD relearn that writes sensor IDs directly to the TPMS module via the OBD connector. Consult your owner's manual for the specific procedure for your vehicle.

Keep your tire pressure monitoring system working correctly with this direct replacement TPMS sensor. Designed for a wide range of Infiniti and Nissan models, this 433MHz sensor comes pre-programmed for your specific vehicle and does not require additional programming. It is a reliable aftermarket part that helps you maintain safe driving conditions.

This tire pressure sensor is built to meet OEM standards and is a direct fit for many popular models. It uses a durable PCBA board and battery to provide stable and sensitive readings, alerting you to any pressure changes in your tires. By installing this sensor, you can improve your vehicle's safety and fuel efficiency.

The sensor is 100% brand new and ready to install. It comes pre-programmed for your specific vehicle make, model, and year. To activate the sensor, you will need to perform a "re-learning" procedure using a scan tool or an OBDII device. For best results, professional installation is recommended.

Before purchasing, please confirm your vehicle's original equipment (OE) part number to ensure a perfect fit. This sensor is a direct replacement for your original part and will restore your TPMS functionality. It is a cost-effective solution for maintaining your vehicle's safety systems.

Key Features and Benefits

- 100% brand new and high-quality construction that provides reliable and long-lasting performance.

• Pre-programmed for your specific vehicle make, model, and year that eliminates the need for complex programming.

• Durable, stable, and sensitive design that ensures accurate tire pressure readings.

• Direct replacement for your original sensor that simplifies the installation process.

• Perfect aftermarket solution that offers a cost-effective alternative to dealer parts.

Who Is This For

- Infiniti and Nissan owners who need to replace a faulty or dead TPMS sensor.

• Drivers who want to restore their tire pressure monitoring system to full working order.

• Car enthusiasts looking for a reliable and affordable replacement part for their vehicle.

• Anyone who values safety and wants to maintain proper tire pressure for better fuel economy and handling.

Usage Scenario

David noticed the TPMS warning light on his Nissan Altima's dashboard was constantly on. After checking his tires and finding the pressure was fine, he knew a sensor had failed. He ordered this 4-pack of sensors to replace all four at once. After a quick installation by his local mechanic and a simple OBDII re-learning procedure, the warning light turned off, and he could drive with confidence again.

Micro Comparison

Unlike buying a single sensor from a dealership, this set offers a more affordable way to replace all your TPMS sensors at once. It provides the same functionality as the original equipment part without the high price tag. This sensor is a smart choice for cost-conscious drivers who want to maintain their vehicle's safety systems.

Specifications

Material: PCBA board and battery

Model Number: 40700-3JA0A, 40700-3JA0B, 42753-TX4-A51, 40700-9DJ0A

OEM NO.: 40700-3JA0A

Package Includes

- 1 or 4 x Tire Pressure Sensor(s) (depending on your selection)

Why You Will Love It

You will love the peace of mind that comes from a fully functional TPMS. This sensor helps you avoid unsafe driving conditions and potential tire damage. It is a simple, effective, and budget-friendly way to keep your car running safely.

Questions and Answers

Question: Do these sensors need to be programmed before installation?

Answer: No, these sensors come pre-programmed for your specific vehicle make, model, and year. They do not require additional programming.

Question: How do I activate the sensors after installation?

Answer: You will need to perform a "re-learning" procedure using a TPMS scan tool or an OBDII device to activate the sensors.

Question: Are these sensors compatible with my 2015 Nissan Altima?

Answer: Yes, this sensor is compatible with the Nissan Altima from 2015-01 to 2019-02. Please confirm your vehicle's OE part number before ordering.

Question: What is the difference between the 1-pack and the 4-pack?

Answer: The 1-pack includes a single sensor, while the 4-pack includes four sensors, allowing you to replace all sensors on your vehicle at once.

Question: Can I install these sensors myself?

Answer: While installation is possible, it is recommended to be performed by a trained professional to ensure proper fit and function.

This set of four 433MHz TPMS sensors is a direct replacement for your Jetour vehicle. They are pre-programmed to match the specific make, model, and year of your car, simplifying the installation process. You can restore your tire pressure monitoring system and drive with confidence.

These sensors are designed to provide accurate and reliable tire pressure readings. They help you maintain proper tire inflation, which can improve fuel efficiency and extend the life of your tires. The sensors communicate directly with your vehicle's onboard computer to alert you to any pressure changes.

Installation is straightforward for a trained professional. The sensors require a simple "re-learning" process using an OBDII scan tool to be activated. Once installed and activated, they will seamlessly integrate with your vehicle's TPMS system, giving you real-time pressure data for each tire.

This product is an essential safety component for your Jetour. It ensures you are always aware of your tire conditions, helping to prevent accidents caused by under-inflated or over-inflated tires. Drive safer and more efficiently with this reliable TPMS sensor set.

Key Features and Benefits

- Pre-programmed sensors that are specifically designed for your Jetour vehicle, eliminating the need for complex programming.

• 433MHz frequency that ensures reliable and consistent communication with your vehicle's TPMS system.

• Direct OEM replacement part number F11-3114011BA, guaranteeing a perfect fit and compatibility.

• Simplified relearn process using an OBDII scan tool, making installation quick for a professional.

• Helps maintain optimal tire pressure, which can improve fuel economy and tire lifespan.

Who Is This For

- Jetour owners who need to replace a faulty or dead TPMS sensor in their vehicle.

• Car enthusiasts looking for a direct, pre-programmed replacement part for a hassle-free fix.

• Professional mechanics who need a reliable and compatible sensor for a customer's Jetour.

• Anyone experiencing TPMS warning lights on their dashboard for a Jetour Traveller, X70, X90, or Shanhai model.

Usage Scenario

Mark noticed the TPMS light on his Jetour X70 PLUS dashboard was constantly on. After checking the tire pressures manually, he realized one of his sensors had failed. He ordered this set of four sensors. He took his car to his local tire shop, where they removed the old sensors, installed these new ones, and used an OBDII scan tool to re-learn the sensor IDs. Within 20 minutes, the warning light was off, and Mark could see the exact pressure of each tire on his dashboard display again.

Micro Comparison

Unlike universal sensors that require complex programming and may not always communicate correctly, these sensors are pre-programmed specifically for your Jetour. This direct-fit approach saves time and reduces the risk of compatibility issues. You get a part that is designed to work seamlessly with your vehicle's existing system.

Specifications

- Material: PCBA board and battery

• Model Number: F11-3114011BA

• OEM NO.: F11-3114011BA

• Frequency: 433MHz

• Quantity: 4 pieces

Package Includes

- 4 x TPMS Tire Pressure Sensor

Why You Will Love It

You will love the peace of mind that comes with a fully functioning TPMS. These sensors are a direct, pre-programmed replacement, making the repair process simple for any professional. You can get back on the road quickly, knowing your tire pressure is being accurately monitored.

Questions and Answers

Question: How do I know if these sensors are right for my Jetour?

Answer: Check the product description for the list of compatible vehicle models and years. Also, compare the part number F11-3114011BA on your old sensor to confirm it matches.

Question: Do I need to program these sensors before installation?

Answer: No, the sensors are pre-programmed for your vehicle. They just need to be activated and learned to your car using an OBDII scan tool.

Question: Can I install these sensors myself?

Answer: Installation of TPMS is recommended to be performed only by trained professionals.

Question: What is the "re-learning" process?

Answer: After installing the sensors, a professional will use an OBDII scan tool to connect to your vehicle and upload the new sensor IDs. This allows your car to recognize the new sensors.

Question: My old sensor has a different part number. Will this work?

Answer: It is important to confirm the part number before purchase. If the part number on your old sensor is different from F11-3114011BA, it may not be compatible.

Keep your Jeep’s tire pressure monitoring system working correctly with this set of four 433MHz TPMS sensors. Designed as a direct replacement for select Jeep Compass, Grand Cherokee, and Patriot models, these sensors come pre-programmed for your specific vehicle, so no sensor programming is needed. Simply install them and use a scan tool or OBDII relearn procedure to activate the system.

Each sensor is built with a PCBA board and battery for reliable, long-term performance. The package includes four sensors, one for each tire, to ensure your entire TPMS system is updated at once. This helps maintain accurate tire pressure readings, which supports better fuel efficiency, safer handling, and longer tire life.

Installation is recommended to be performed by a trained professional. The sensors are 100% new and require a simple re-learning process with an OBDII tool after installation. If you are unsure about compatibility, check your vehicle’s part number against the OEM number 56029481AB before purchasing.

Key Features and Benefits

- Pre-programmed for specific Jeep models that simplifies installation and eliminates the need for sensor programming

• 433MHz frequency that ensures reliable communication between the sensor and your vehicle’s TPMS system

• 100% new PCBA board and battery that provides dependable performance and long service life

• Direct replacement design that fits your vehicle without modifications or adapters

• Four-sensor set that allows you to replace all tire sensors at once for consistent readings

Who Is This For

- Owners of Jeep Compass (2006-2017), Grand Cherokee (2004-2010), or Patriot (2014-2017) needing TPMS replacement

• Drivers who want to restore their tire pressure monitoring system after sensor battery failure or damage

• Vehicle owners preparing for a tire change or rotation who want to update sensors at the same time

• DIY enthusiasts or professional mechanics looking for a pre-programmed, plug-and-play TPMS solution

Usage Scenario

Mark noticed his Jeep Compass’s tire pressure warning light stayed on even after inflating all four tires. A quick check revealed the original TPMS sensors had finally worn out after years of use. He ordered this four-sensor set, had a local shop install them, and used an OBDII scanner to complete the relearn process. Within minutes, the warning light turned off, and he could see accurate tire pressures on his dashboard again. Now he drives with confidence, knowing his TPMS is working properly.

Micro Comparison

Unlike universal TPMS sensors that require programming or cloning, these sensors come pre-programmed for your specific Jeep model. This saves you time and the cost of a programming tool. They also arrive as a complete four-pack, so you don’t have to buy sensors individually or worry about mixing different brands. For Jeep owners looking for a straightforward, direct-fit replacement, this set offers a hassle-free solution.

Specifications

- Material: PCBA board and battery

• Model Number: 56029481AB

• OEM Number: 56029481AB

• Frequency: 433MHz

• Compatibility: For Jeep Compass (2006-09 to 2017-09), Jeep Grand Cherokee (2004-07 to 2010-04), Jeep Patriot (2014-01 to 2017-11)

Package Includes

- 4 x TPMS Tire Pressure Sensors

Why You Will Love It

Restoring your Jeep’s TPMS with these pre-programmed sensors means no complicated setup and no extra programming costs. You get peace of mind knowing your tire pressure is monitored accurately, which helps keep you safer on the road. Plus, replacing all four sensors at once saves you from dealing with another failure down the line.

Questions and Answers

Question: Do these sensors need programming before installation?

Answer: No, they come pre-programmed for your specific Jeep model. You only need to activate them with a scan tool or OBDII relearn process after installation.

Question: Will these fit my 2010 Jeep Grand Cherokee?

Answer: Yes, they are designed for Jeep Grand Cherokee models from 2004-07 to 2010-04. Please confirm your vehicle’s part number matches 56029481AB before purchasing.

Question: Can I install these sensors myself?

Answer: Installation is recommended to be performed by trained professionals. The sensors need to be mounted inside the tire and then activated using an OBDII tool.

Question: What is the frequency of these sensors?

Answer: They operate at 433MHz, which is the standard frequency for many Jeep TPMS systems.

Question: How many sensors are included in the package?

Answer: The package includes four sensors, one for each tire on your vehicle.

Keep your Renault driving safe with a direct replacement tire pressure monitoring sensor. This 433MHz TPMS sensor is designed for several popular Renault models including the Megane, Scenic, Zoe, Fluence, and Laguna. It comes pre-programmed to match your vehicle's system, so you can install it without complex setup.

Maintaining correct tire pressure is essential for fuel efficiency, tire life, and overall safety. A faulty sensor can leave you without critical pressure warnings. This set of four sensors restores that protection and helps you drive with confidence.

Each sensor is built to meet OEM specifications and uses the standard 433MHz frequency found in many Renault vehicles. The sensors are 100% new and ready to sync with your car's TPMS system using an OBDII tool for a simplified relearn process. Professional installation is recommended to ensure proper function and sealing.

Before purchasing, confirm your vehicle's OE part number to guarantee compatibility. This set replaces part numbers 407000435R and 407003743R, fitting a wide range of Renault models from the late 2000s through the late 2010s.

Key Features and Benefits

- Pre-programmed 433MHz sensors that are ready to install and require no complex sensor programming, saving you time and effort.

• Direct fit replacement for multiple Renault models including Megane, Scenic, Zoe, Fluence, and Laguna, ensuring broad vehicle compatibility.

• Simplified relearn process using an OBDII tool that makes activation straightforward for trained professionals.

• 100% new sensors that restore your tire pressure monitoring system to full function, helping you maintain safe tire pressure.

• Replaces OEM part numbers 407000435R and 407003743R for an accurate fit with your original equipment specifications.

Who Is This For

- Renault owners with a faulty TPMS sensor who need a direct replacement without visiting the dealership.

• DIY mechanics and professional technicians looking for a reliable, pre-programmed sensor for Renault models.

• Anyone driving a compatible Renault from the 2008-2019 model years who wants to restore their tire pressure monitoring system.

Usage Scenario

Marie noticed her Renault Megane's tire pressure warning light stayed on even after inflating her tires. A quick check at her local garage confirmed one of the sensors had failed. Instead of paying a premium for dealer parts, she ordered this set of four sensors. After having them installed by a professional and completing a quick OBDII relearn, the warning light turned off. Now she drives with peace of mind knowing her TPMS is working correctly again.

Micro Comparison

Unlike universal TPMS sensors that require complex programming and cloning, this set comes pre-programmed for your specific Renault model. It simplifies the installation process and reduces the chance of compatibility errors. While generic sensors may work, choosing a sensor matched to your OE part numbers offers a more straightforward and reliable replacement experience.

Specifications

Frequency: 433MHz

OEM Part Numbers: 407000435R, 407003743R

Condition: 100% New

Package Includes

- 4 x TPMS Tire Pressure Sensors

Why You Will Love It

Restoring your Renault's tire pressure monitoring system gives you one less thing to worry about on the road. These pre-programmed sensors take the guesswork out of replacement and help you maintain safe driving conditions. You will appreciate the straightforward installation and the confidence that comes with a functioning TPMS.

Questions and Answers

Question: Do these sensors come pre-programmed for my Renault?

Answer: Yes, these sensors are pre-programmed specifically for your Renault model. They do not require additional programming, but you will need an OBDII tool for the relearn process.

Question: How do I know if these sensors fit my vehicle?

Answer: Check your vehicle's OE part number before purchasing. This set replaces part numbers 407000435R and 407003743R and fits many Renault models including Megane, Scenic, Zoe, Fluence, and Laguna from the 2008-2019 model years.

Question: Can I install these sensors myself?

Answer: Installation of TPMS sensors is recommended to be performed only by trained professionals to ensure proper sealing and function. The relearn process requires an OBDII tool.

Question: What is the frequency of these sensors?

Answer: These sensors operate at 433MHz, which is the standard frequency used by many Renault vehicles.

Question: Are these sensors new or refurbished?

Answer: These sensors are 100% new. They are not refurbished or used.

Question: What do I do if the wrong sensor is shipped?

Answer: Please confirm your OE number before ordering. If you are unsure, contact us before placing your order to verify compatibility. We cannot refund for incorrect orders placed without confirmation.

Replace your faulty tire pressure sensor with a direct-fit 433MHz TPMS sensor designed for specific Buick, Cadillac, and Chevrolet models. This pre-programmed replacement part number 13598773 helps you maintain accurate tire pressure monitoring without complex setup.

Driving with a malfunctioning tire pressure sensor can leave you guessing about your tire health. This sensor provides real-time pressure data to your vehicle's onboard system, so you can spot slow leaks or pressure drops before they become a problem. It is a direct replacement for the factory sensor, meaning it fits into the same valve stem position without modifications.

This sensor operates at 433MHz and communicates with your car's existing TPMS receiver. It comes pre-programmed for the specific vehicle models listed in the fitment guide. Activation requires a scan tool or a relearn procedure, which is a standard step for any TPMS replacement. The sensor is built to last with a battery life of about three years under normal driving conditions.

Keeping your TPMS in working order is not just about convenience. It helps you maintain proper tire pressure, which can improve fuel efficiency, extend tire life, and provide a safer driving experience. This sensor gives you that peace of mind with a straightforward installation process.

Key Features and Benefits

- Pre-programmed for select GM vehicles that simplifies installation and eliminates the need for manual programming

• 433MHz operating frequency that ensures reliable communication with your vehicle's TPMS receiver

• Direct replacement design that fits into the original sensor position without modifications

• Battery life of approximately 3 years that provides long-term, maintenance-free operation

• Compatible with multiple Buick, Cadillac, and Chevrolet models that covers a wide range of popular vehicles

Who Is This For

- Owners of Buick LaCrosse (2017-2020), Regal (2018-2023), or Cadillac CT6 (2017-2018) needing a sensor replacement

• Chevrolet Camaro (2016-2019), Cruze (2017-2018), Malibu (2015-2018), or Volt (2017-2018) drivers with a failed TPMS

• DIY car owners who want to replace a faulty sensor without a trip to the dealership

• Mechanics and auto shops looking for a cost-effective, pre-programmed TPMS solution for customer vehicles

Usage Scenario

Mark noticed his Chevrolet Malibu's tire pressure warning light stayed on even after inflating all four tires. A quick check with a handheld TPMS tool confirmed the front left sensor was not transmitting. Instead of paying the dealership premium, he ordered this pre-programmed 13598773 sensor. After mounting it on the wheel, he used a simple scan tool to trigger the relearn process. Within minutes, the warning light turned off, and his tire pressure readings returned to normal.

Micro Comparison

Unlike universal TPMS sensors that require manual programming with a separate tool, this sensor comes pre-programmed for the listed vehicle models. That means you skip the programming step and go straight to installation and relearn. It is a more direct replacement option compared to generic sensors that may need additional configuration to match your car's system.

Specifications

Part Number: 13598773

Operating Frequency: 433MHz

Battery Life: Approximately 3 years

Material: Tire pressure monitoring system components

Package Includes

1x TPMS Sensor (pre-programmed)

Why You Will Love It

You get a sensor that fits your car right out of the box, so you spend less time figuring out compatibility and more time driving. It restores your TPMS functionality without the high cost of a dealer replacement. That warning light finally goes away, and you drive with confidence knowing your tire pressure is being monitored.

Questions and Answers

Question: Do I need to program this sensor before installing it?

Answer: No, this sensor comes pre-programmed for the specific vehicle models listed. You only need to perform a relearn procedure after installation using a scan tool.

Question: What is a relearn procedure and how do I do it?

Answer: A relearn procedure tells your car's TPMS system to recognize the new sensor. It is typically done with a TPMS scan tool or through the vehicle's menu. Many tire shops can do this quickly.

Question: Will this sensor work on my 2019 Chevrolet Camaro?

Answer: Yes, this sensor is compatible with Chevrolet Camaro models from 2016 to 2019.

Question: How long does the battery in this sensor last?

Answer: The battery is designed to last approximately 3 years under normal driving conditions.

Question: Can I install this sensor myself?

Answer: Yes, but installation requires mounting the sensor to the wheel and performing a relearn. It is recommended to have a trained professional handle the installation and relearn process.

Replace a failing or dead tire pressure sensor with the NEVOSA 40700-5642R TPMS Sensor. This direct-fit replacement restores your vehicle's tire pressure monitoring system to full working condition. It is designed for a wide range of European models from Smart, Renault, Dacia, Nissan, and Lada, helping you maintain proper tire inflation and safer driving.

This sensor communicates at 433MHz and is built with durable ABS plastic and metal. It undergoes a 100% quality test before shipping, so you can install it with confidence. The included high-performance battery (CR2032/CR2050/CR2450) offers a lifespan of 2 to 5 years, ensuring long-term reliability. Each sensor is produced from environmental, non-toxic, anti-burning plastic material.

Finding the right TPMS sensor can be tricky. The NEVOSA 40700-5642R simplifies the process with its broad vehicle compatibility. Whether you drive a Renault Clio IV, a Dacia Duster, or a Smart Forfour, this sensor is designed to match the original equipment specifications. The manufacturer part number 40700-5642R, along with interchange numbers 407001628R, 407009322R, and 407009987R, makes cross-referencing straightforward. A 24-month warranty backs the product for extra peace of mind.

Key Features and Benefits

- Direct OE replacement design that restores factory TPMS functionality and helps prevent under-inflation alerts.

• Broad vehicle compatibility for Smart, Renault, Dacia, Nissan, and Lada models that reduces guesswork and returns.

• 100% tested quality that ensures each sensor works correctly right out of the box.

• High-performance battery with a 2-5 year lifespan that delivers long service life and fewer replacements.

• Strong and stable 433MHz signal that maintains a reliable connection with your vehicle's receiver.

• Environmental ABS plastic and metal construction that resists heat and burning for safe daily use.

Who Is This For

- Drivers of European vehicles like Renault, Dacia, Smart, and Nissan who need a direct OE replacement TPMS sensor.

• Car owners seeing a low tire pressure warning light or a TPMS malfunction message on the dashboard.

• Mechanics and DIY installers looking for a pre-tested sensor with a 24-month warranty.

• Fleet managers maintaining multiple compatible vehicles who want a single reliable sensor part number.

Usage Scenario

Paul noticed the tire pressure warning light flashing on his 2015 Renault Kangoo dashboard. After checking the tire pressures were fine, he realized the original TPMS sensor had failed. He ordered the NEVOSA 40700-5642R sensor, cross-referenced it with his old part number 407001628R, and installed it at home. The warning light turned off immediately, and his tire monitoring system has worked without issues since then.

Micro Comparison

Some universal TPMS sensors require programming or adapters before they work with your vehicle. The NEVOSA 40700-5642R is designed as a direct replacement for specific OEM part numbers, so you can install it without additional setup. It is also 100% tested before shipping, which helps avoid the frustration of receiving a non-functional unit.

Specifications

- Material: ABS Plastic and Metal

• Frequency: 433MHz

• Color: Black (as picture shown)

• Battery Model: CR2032 / CR2050 / CR2450

• Battery Lifespan: 2-5 years

• Storage and Operating Temperature: -40°C to +125°C

• Interchange Numbers: 407001628R, 407009322R, 407009987R

• OEM Numbers: 407001628R, 407007932R, 407005642R

• Manufacturer Part Number: 40700-5642R

Package Includes

- 1 x NEVOSA 40700-5642R TPMS Sensor

Why You Will Love It

You will love the peace of mind that comes from a fully functioning tire pressure monitoring system. This sensor is pre-tested and backed by a 24-month warranty, so you can install it and drive confidently. It is a simple, reliable fix for a common dashboard warning light.

Questions and Answers

Question: Will this TPMS sensor fit my 2016 Dacia Duster?

Answer: Yes, this sensor is listed as compatible with the Dacia Duster from 2010/02 to 2019/12.

Question: Does this sensor come pre-programmed?

Answer: This sensor is a direct OE replacement. You should verify your original part number to ensure a proper fit.

Question: What battery does this sensor use?

Answer: It uses a high-performance CR2032, CR2050, or CR2450 battery with a lifespan of 2 to 5 years.

Question: Is this product tested before shipping?

Answer: Yes, each sensor is 100% tested before it leaves the factory.

Question: What is the warranty period for this sensor?

Answer: The sensor comes with a 24-month warranty.

Question: Can I use this sensor on a Renault Master van?

Answer: Yes, it fits the Renault Master from 2009/11 to 2020/12.

Keep your tires in good shape with these metal tire valve stem cap covers. Made from aluminum alloy with a built-in O rubber seal, each cap helps block dirt, moisture, and debris from reaching the valve core. This small but important accessory helps prevent slow air leaks and keeps your tire pressure stable over time.

These valve caps fit a wide range of vehicles including cars, trucks, SUVs, motorcycles, and bicycles. The universal size works with standard tire valves, so you can install them in seconds without any tools. The black metal finish adds a clean, understated look that matches most wheels and rims.

Each cap has a textured outer surface that makes it easy to grip when you need to remove it for an air check. The built-in rubber ring creates a tight seal that stays put even during highway driving or rough road conditions. With a set of four, you get one cap for each tire on a standard vehicle.

These tire valve caps are a simple upgrade that protects an often-overlooked part of your tire system. They help your valve stems last longer and keep your tires performing as they should.

Key Features and Benefits

- Aluminum alloy construction that resists rust and corrosion for long-lasting use

• Built-in O rubber seal that creates a tight closure to help prevent air leaks

• Universal fit that works on most cars, trucks, motorcycles, and bikes for broad compatibility

• Easy hand-tighten installation that requires no tools or special skills

• Compact and lightweight design that stays secure while driving

• Textured grip surface that makes removal simple when checking tire pressure

Who Is This For

- Car owners looking for a simple way to protect their tire valves from dust and moisture

• Motorcycle and bicycle riders who want a durable cap that stays on during rides

• Truck and SUV drivers who need a tight seal on larger vehicle tires

• Anyone replacing old, cracked, or missing valve caps on their vehicle

Usage Scenario

Mark noticed his car tires were losing air more often than usual. After checking for punctures, he saw the old plastic valve caps were cracked and letting in dirt. He replaced them with these aluminum alloy valve caps. The rubber O-ring sealed tightly, and his tires held air consistently for weeks. Now he checks tire pressure less often and drives with more confidence.

Micro Comparison

Basic plastic valve caps often crack under sun exposure or become loose over time. These aluminum alloy caps with a rubber O-ring provide a stronger seal and better protection against the elements. They are a more reliable choice for daily drivers who want long-term performance without frequent replacements.

Specifications

- Material: Aluminum Alloy + O rubber seal

• Quantity: 4 pieces

• Size: 16 x 10 mm / 0.63 x 0.39 inch

• Color: Black

Package Includes

- 4 x Tire valve dust caps

Why You Will Love It

These valve caps give you a simple way to protect your tires without spending much time or money. The metal build feels solid in your hand and the tight seal gives you peace of mind every time you hit the road. It is a small upgrade that makes a real difference in how your tires hold air.

Questions and Answers

Question: Will these fit my motorcycle tires?

Answer: Yes, they fit standard valve stems on most motorcycles, as well as cars, trucks, and bicycles.

Question: Do these caps prevent air from leaking out?

Answer: The O rubber ring helps create a tight seal that reduces the chance of slow air leaks, but they are not a replacement for a properly functioning valve core.

Question: Are they difficult to install?

Answer: No, you simply screw them on by hand. No tools are needed.

Question: Will they rust over time?

Answer: The caps are made from aluminum alloy, which resists rust and corrosion better than standard steel caps.

Question: Can I use these on a truck with larger tires?

Answer: Yes, as long as your truck uses standard tire valve stems, these caps will fit.

Question: Do they come with a warranty?

Answer: Warranty terms depend on the seller. Please check the product listing for specific warranty information.

Keep your tires in top shape with these durable valve stem caps. Made from a mix of copper and ABS, they provide a tight seal to help prevent air leaks and flat tires. The set includes 4 or 8 caps, making them a practical upgrade for any car, truck, SUV, motorcycle, or bike.

These caps are designed to replace standard plastic ones. They fit most vehicles and are simple to screw on by hand. Each cap has a high-quality sealing ring inside that blocks dirt, water, and snow from reaching the valve core. This helps maintain stable tire pressure and protects the valve from corrosion.

Beyond function, these caps add a touch of style to your wheels. The sleek design gives your vehicle a clean, finished look. Whether you drive a daily commuter or a weekend toy, these caps offer a simple way to protect and personalize your ride.

Key Features and Benefits

- High-quality sealing ring inside the cap that helps prevent flat tires by blocking air leaks.

• Durable copper and ABS construction that resists wear and lasts longer than standard plastic caps.

• Dust-proof design that protects the valve core from clay, water, and snow for stable tire pressure.

• Easy to install and safe to use with no tools required.

• Personalized style that decorates your valve stems and shows off your personality.

Who Is This For

- Car owners who want a simple upgrade to protect their tire valves and prevent air loss.

• Truck and SUV drivers who need durable caps that can handle rough conditions and road debris.

• Motorcycle and bike riders looking for a lightweight, secure fit that won't rattle loose.

• Anyone who wants to add a clean, personalized look to their wheels without spending much.

Usage Scenario

Mark noticed his car's tire pressure dropped slightly every week. After checking for punctures, he found the old plastic valve caps were cracked and letting air escape. He swapped them out for this set of metal and ABS caps. The snug fit and rubber seal stopped the slow leak immediately. Now he checks his pressure monthly and the caps still look like new.

Micro Comparison

Standard plastic valve caps can crack over time and let moisture in. These caps combine a copper base with an ABS outer shell for better durability and a tighter seal. The built-in rubber gasket provides extra protection against air loss and corrosion, which basic caps lack.

Specifications

Material: Copper + ABS

Size: 1.6 cm x 0.8 cm / 0.62 in x 0.31 in

Color: As shown in the product images

Package Includes

- 4 or 8 valve caps (depending on the option selected)

Why You Will Love It

These caps give you peace of mind by keeping your tires properly sealed. They are a small investment that can save you from unexpected pressure drops and flat tires. Plus, the clean look adds a nice finishing touch to your wheels.

Questions and Answers

Question: Will these caps fit my car's valve stems?

Answer: Yes, they are universal and fit most standard tire valves on cars, trucks, SUVs, motorcycles, and bikes.

Question: Do these caps prevent air from leaking?

Answer: Yes, the high-quality sealing ring inside helps prevent air leaks and flat tires.

Question: How do I install them?

Answer: Simply unscrew your old caps and screw these on by hand. No tools are needed.

Question: What material are these caps made from?

Answer: They are made from a combination of copper and ABS plastic for durability and a secure fit.

Question: How many caps come in the package?

Answer: You can choose between a set of 4 caps or a set of 8 caps.

These programmable TPMS sensors offer a reliable solution for maintaining accurate tire pressure monitoring across a wide range of vehicles. With dual-frequency support at 433MHz and 315MHz, these sensors work with popular programming tools to help you manage tire pressure data effectively.

Designed for professional and DIY use, these sensors provide a flexible way to replace or program tire pressure monitoring system sensors. They are compatible with multiple programming devices, giving you options to match your existing tools and workflow.

These sensors are built to deliver consistent performance and easy integration into your vehicle's TPMS system. The ability to program them with various tools makes them a practical choice for workshops and individual users who need reliable tire pressure monitoring solutions.

Key Features and Benefits

- Dual frequency support (433MHz+315MHz) that covers a wide range of vehicle models for versatile use

• Compatibility with multiple programming tools (TS501, TS508, TS601, TS608, ITS600E, MK808TS, MK808S-TS, MP808TS) that allows flexible setup options

• Programmable design that enables you to customize sensor settings for your specific vehicle requirements

• No software upgrade needed for programming that keeps the sensor unlocked and ready for use

Who Is This For

- Automotive technicians and mechanics who need programmable TPMS sensors for customer vehicles

• DIY car enthusiasts who want to maintain or replace their own tire pressure monitoring systems

• Workshops and service centers that use multiple programming tools and need sensor compatibility

• Vehicle owners who require replacement sensors for models using 433MHz or 315MHz frequencies

Usage Scenario

Mark runs a small auto repair shop and often deals with vehicles needing TPMS sensor replacements. He recently had a customer with a 2018 sedan that kept showing a low tire pressure warning even after checking the tires. Mark used his TS508 programmer to program these dual-frequency sensors, and within minutes the new sensors were set up and communicating with the vehicle's system. The warning light turned off, and the customer drove away satisfied with the quick fix.

Micro Comparison

These programmable sensors stand out because they support both 433MHz and 315MHz frequencies in one unit, reducing the need to stock separate sensors for different vehicles. Their compatibility with a wide range of programming tools gives you more flexibility compared to sensors that only work with one specific programmer.

Specifications

- Frequency: 433MHz + 315MHz

• Compatible Programmers: TS501, TS508, TS601, TS608, ITS600E, MK808TS, MK808S-TS, MP808TS

• Note: Do not upgrade to the latest version of the software for programming, otherwise the sensor will be locked.

Package Includes

- 2 x Programmable TPMS Sensors

Why You Will Love It

You will appreciate the convenience of having one sensor that works with both major TPMS frequencies, saving you time and inventory space. The broad compatibility with popular programming tools means you can use your existing equipment without needing to buy new programmers.

Questions and Answers

Question: What frequencies do these TPMS sensors support?

Answer: These sensors support both 433MHz and 315MHz frequencies, covering a wide range of vehicles.

Question: Which programming tools work with these sensors?

Answer: They are compatible with TS501, TS508, TS601, TS608, ITS600E, MK808TS, MK808S-TS, and MP808TS programmers.

Question: Can I update the software on my programmer before using these sensors?

Answer: No, do not upgrade to the latest software version for programming, as this will lock the sensor.

Question: Are these sensors suitable for both front and rear tires?

Answer: Yes, these sensors can be programmed for any tire position on your vehicle.

Question: Do I need special training to program these TPMS sensors?

Answer: Basic familiarity with TPMS programming tools is helpful, but the process is straightforward with compatible programmers.

Keep your BMW or MINI Cooper driving safely with this set of 4 direct-fit tire pressure monitoring sensors. Operating at 433MHz and pre-programmed for your specific vehicle model, these sensors help you maintain proper tire inflation for better fuel economy and safer handling.

These TPMS sensors are designed as a direct replacement for your factory units. They come pre-programmed to match your BMW or MINI Cooper's system, which means you can install them and then perform a simple re-learn procedure using a compatible scan tool. Each sensor is built with durability in mind and is ready to sync with your vehicle's onboard computer.

With a battery life of about 3 years, these sensors provide long-term, reliable service. They monitor your tire pressure in real time and alert you if pressure drops below safe levels. This helps you avoid uneven tire wear, reduce the risk of blowouts, and improve overall driving stability.

Upgrading to a fresh set of TPMS sensors is a straightforward way to restore your vehicle's tire monitoring functionality. Whether you are replacing a faulty sensor or refreshing all four at once, this kit gives you everything you need for a complete installation.

Key Features and Benefits

- Pre-programmed for your specific BMW or MINI Cooper model that ensures plug-and-play compatibility with your vehicle's TPMS system

• 433MHz operating frequency that matches factory specifications for reliable wireless communication

• Battery life of about 3 years that provides long-lasting, maintenance-free performance

• Direct-fit replacement design that makes installation straightforward with standard tools

• Real-time pressure monitoring that helps you maintain optimal tire inflation for safety and fuel efficiency

Who Is This For

- BMW owners with models from 2009 to 2016 who need to replace worn or faulty TPMS sensors

• MINI Cooper owners looking for a direct-fit sensor replacement for their 2010 to 2016 vehicles

• DIY mechanics who want to restore their vehicle's tire pressure monitoring system without a dealer visit

• Fleet managers maintaining multiple BMW or MINI vehicles who need a reliable, cost-effective sensor solution

Usage Scenario

Mark noticed his BMW 528I's tire pressure warning light flickering on his morning commute. After checking his tires and finding them properly inflated, he realized the old TPMS sensors were failing. He ordered this 4-pack, installed them in his driveway in under an hour, and used his scan tool to re-learn the new sensors. The warning light disappeared, and now he gets accurate pressure readings on his dashboard every time he drives.

Micro Comparison

Unlike generic universal TPMS sensors that require complex programming and may not sync correctly with your BMW or MINI, these sensors come pre-programmed for your specific vehicle model. This saves you the hassle of manual programming and reduces the risk of compatibility issues. While some aftermarket sensors need dealer activation, this set works with standard scan tools for the re-learn process, giving you more control over the installation.

Specifications

- Interchange Part Number: 36106856227

• Frequency: 433MHz

• Battery Life: About 3 years

Package Includes

- 4 x Tire Pressure Monitoring Sensors

Why You Will Love It

You will appreciate the peace of mind that comes with accurate tire pressure monitoring every time you get behind the wheel. These sensors restore your vehicle's safety feature without requiring a costly trip to the dealership. Install them once and enjoy reliable performance for years to come.

Questions and Answers

Question: Do these sensors come pre-programmed for my BMW?

Answer: Yes, they are pre-programmed specifically for your make, model, and year of vehicle as listed in the compatibility chart.

Question: Do I need any special tools to install these sensors?

Answer: You will need a tire mounting machine to remove and install the sensors in your wheels, and a compatible scan tool to perform the re-learn procedure.

Question: How long does the battery last in these sensors?

Answer: The battery life is about 3 years under normal driving conditions.

Question: Will these sensors work on my 2011 MINI Cooper Countryman?

Answer: Yes, these sensors are compatible with MINI Cooper Countryman models from 2011 to 2016.

Question: What is the re-learn procedure after installation?

Answer: After installing the sensors, you need to use a compatible TPMS scan tool to activate and re-learn each sensor to your vehicle's system.

Keep your tires at the right pressure without the hassle. This 315MHz TPMS sensor is pre-programmed to fit a wide range of Ford, Lincoln, and Mercury vehicles from 2010 to 2016. It replaces several OEM part numbers including CM5T-1A180-AA and 9L3T-1A180-AF, making it a direct swap for your existing sensor.

Driving with properly inflated tires improves fuel economy, extends tire life, and gives you better control on the road. This sensor monitors the internal pressure and temperature of each tire, sending real-time data to your vehicle's display. When pressure drops below the safe threshold, you get an early warning so you can address the issue before it becomes a problem.

Installation is straightforward because the sensor comes already programmed for your specific make, model, and year. You will need to activate the sensors using a compatible scan tool or follow your vehicle's relearn procedure. The sensor is built to OEM specifications, so it fits securely inside the wheel and communicates reliably with your car's TPMS system.

Whether you are replacing a faulty sensor or upgrading all four tires at once, this set gives you the peace of mind that comes from knowing your tire pressure is always monitored. Professional installation is recommended to ensure proper seating and sealing.

Key Features and Benefits

- Pre-programmed for your vehicle that requires no additional coding before installation

• 315MHz operating frequency that matches the factory TPMS system in many Ford, Lincoln, and Mercury models

• Replaces multiple OEM part numbers including CM5T-1A180-AA, 9L3T-1A180-AF, and 9L3T-1A180-BB for broad compatibility

• Monitors tire pressure and temperature in real time that helps prevent blowouts and uneven tire wear

• Compatible with stationary, automatic, and OBD relearn procedures that gives you flexibility during activation

• Sold in single or 4-pack options that lets you replace one sensor or all four at once

Who Is This For

- Ford owners with a 2010-2014 Fusion, Focus, Mustang, or F-150 who need a direct replacement TPMS sensor

• Lincoln drivers with a 2011-2015 MKS, MKT, MKX, or MKZ who want a pre-programmed sensor that matches the original equipment

• Mercury Mariner and Milan owners from 2009-2011 who need a compatible sensor for their tire pressure monitoring system

• Fleet managers maintaining multiple Ford vehicles from the 2010-2016 model years who need a reliable, cost-effective TPMS solution

Usage Scenario

Mark noticed the TPMS warning light on his 2012 Ford F-150 dashboard had been on for two days. After checking the tire pressure manually and finding it normal, he realized the sensor itself had failed. He ordered a single pre-programmed CM5T-1A180-AA replacement, took it to his local tire shop, and had the sensor installed during a routine tire rotation. The shop technician activated the sensor using a handheld TPMS tool, and the warning light turned off immediately. Mark now checks his tire pressure display every morning and feels more confident driving his truck on the highway.

Micro Comparison

Unlike universal TPMS sensors that require manual programming and a lengthy setup process, this sensor comes pre-programmed for your specific vehicle. It matches the original OEM part numbers exactly, so you do not have to worry about compatibility issues or signal problems. The sensor uses the same 315MHz frequency as the factory system, ensuring reliable communication with your car's TPMS module.

Specifications

- Part Number: CM5T-1A180-AA

• Replacement Part Numbers: 9L3T-1A180-AF, 9L3T-1A180-BB, 9L3Z-1A189-A, DE8T-1A180-AA, TPMS-12, 9L3T-1A180-AE, CM5T1A180AA, 9L3Z1A189A, ZZDA37140, DE8T-1A150-AA

• Operating Frequency: 315MHz

• Material: DE8T-1A180-AA, TPMS-12, 9L3T-1A180-AE, CM5T1A180AA, 9L3Z1A189A

• Model Number: 9L3T-1A180-AF, 9L3T-1A180-BB, CM5T-1A180-AA, 9L3Z-1A189-A

Package Includes

- 1 or 4 Tire Pressure Sensors (depending on selection)

Why You Will Love It

You will love how easy it is to get your TPMS warning light off without dealing with complicated programming steps. The sensor fits perfectly into your existing wheel, and the pre-programmed setup saves you time and frustration. Knowing that your tire pressure is being monitored every time you drive gives you one less thing to worry about on the road.

Questions and Answers

Question: Do I need to program this sensor before installing it?

Answer: No, the sensor comes pre-programmed for your specific make, model, and year. You only need to activate it using a compatible scan tool or follow your vehicle's relearn procedure after installation.

Question: Will this sensor work on my 2013 Ford Escape?

Answer: Yes, this sensor fits the 2009-2015 Ford Escape. Please verify your existing part number matches one of the numbers listed in the specifications to confirm compatibility.

Question: What is the difference between stationary relearn and automatic relearn?

Answer: Stationary relearn requires putting the vehicle into "Learn Mode" using a TPMS tool. Automatic relearn happens by simply driving the vehicle for a short period, and the system detects the new sensors on its own.

Question: Can I install this sensor myself?

Answer: Installation involves dismounting the tire, removing the old sensor, and mounting the new one inside the wheel. It is recommended to have this done by a trained professional with the proper tire equipment.

Question: How do I know if this sensor is compatible with my Lincoln MKZ?

Answer: This sensor is compatible with the Lincoln MKZ from 2010 to 2016. Check your existing sensor's part number against the replacement numbers listed in the specifications to be sure it matches.

Question: What should I do if the sensor does not work after installation?

Answer: First, make sure the sensor was activated using the correct relearn procedure for your vehicle. If it still does not work, verify that the part number matches your original sensor. Contact us with your vehicle details and we can help troubleshoot.

Keep your tire pressure monitoring system running reliably with this set of four pre-programmed 433MHz TPMS sensors. Designed as a direct replacement for specific Hyundai, Kia, and Genesis models, these sensors help you maintain proper tire inflation for safer driving and better fuel efficiency. Each sensor comes ready to install without the need for programming, simplifying the replacement process.

Proper tire pressure is essential for vehicle safety, handling, and tire longevity. These TPMS sensors provide accurate pressure readings to your vehicle's onboard system, alerting you to under-inflation or pressure loss. Each sensor is built with durable materials for long-lasting performance in various road conditions.

Installation is straightforward when performed by a trained professional. The sensors require activation using a scan tool or a re-learning procedure, and an OBDII tool is needed for the simplified relearn process. This ensures the sensors communicate correctly with your vehicle's system.

These sensors are a high-quality aftermarket option that matches the original equipment specifications. By choosing this set, you get a complete replacement for all four wheels, ensuring consistent monitoring across your vehicle. Trust in a product designed to restore your TPMS functionality without compromise.

Key Features and Benefits

- Pre-programmed for specific vehicle models that saves you time on setup and installation

• 433MHz frequency that ensures reliable communication with your vehicle's TPMS system

• 100% brand new construction that provides stable and sensitive pressure readings

• Durable build quality that withstands everyday driving conditions for long-term use

• No sensor programming required that simplifies the replacement process

Who Is This For

- Owners of compatible Hyundai, Kia, or Genesis vehicles needing a full set of replacement TPMS sensors

• Drivers who want to maintain proper tire pressure for safety and fuel economy

• Vehicle owners with a faulty or missing TPMS sensor who need a direct-fit replacement

• DIY enthusiasts or professional mechanics looking for a reliable aftermarket TPMS solution

Usage Scenario

Mark noticed the tire pressure warning light on his 2020 Kia Sportage dashboard. After checking his tires, he found one sensor was no longer transmitting data. Instead of visiting the dealership, he ordered this complete set of four sensors. He had a local tire shop install them and perform the OBDII relearn procedure. Within an hour, his TPMS was working perfectly, and the warning light was gone. Now Mark drives with confidence, knowing his tire pressure is accurately monitored.

Micro Comparison

Unlike generic universal TPMS sensors that require complex programming and may not fit properly, these sensors are pre-programmed for specific Hyundai, Kia, and Genesis models. This direct-fit approach eliminates the need for cloning or manual programming, making installation faster and more reliable. While some aftermarket options require additional tools for setup, this set simplifies the process by including sensors ready for your vehicle's system.

Specifications

- Model Number: D4100

• OEM Number: D9100

• Frequency: 433MHz

• Quantity: 4 sensors per set

Package Includes

- 4 x TPMS Tire Pressure Sensors

Why You Will Love It

Restoring your vehicle's tire pressure monitoring system gives you peace of mind on every drive. This complete set of four pre-programmed sensors offers a straightforward replacement that keeps you informed about your tire health. You will appreciate the easy installation process and the reliable performance that helps you maintain safe driving conditions.

Questions and Answers

Question: Do these sensors come pre-programmed for my car?

Answer: Yes, these sensors are pre-programmed specifically for the compatible Hyundai, Kia, and Genesis models listed. No additional programming is needed before installation.

Question: What vehicles are these TPMS sensors compatible with?

Answer: These sensors fit many models including Kia Sportage (2016-2021), Kia Optima (2015-2020), Kia Niro (2016-2021), Hyundai Elantra (2015-2020), Hyundai I30 (2017-2018), Genesis G80 (2021-2026), and many others listed in the product description.

Question: Do I need any special tools to install these sensors?

Answer: Installation is recommended for trained professionals. You will need an OBDII tool for the simplified relearn procedure and a scan tool to activate the sensors after installation.

Question: Are these sensors original equipment quality?

Answer: These sensors are 100% brand new and built to original quality standards. They are a high-quality aftermarket replacement designed to match the performance of your vehicle's original sensors.

Question: How do I confirm these sensors will fit my vehicle before ordering?

Answer: Please check the OEM part number (D9100) against your original sensor's part number before purchase. If you are unsure, contact us with your vehicle details to verify compatibility.

Give your Peugeot a clean, finished look with a set of colored aluminum alloy valve stem caps. These caps protect your tire valves from dust and moisture while adding a subtle touch of style to your wheels. They are lightweight, durable, and simple to install without any tools or modifications.

Made from high-quality chromed aluminum, these valve caps resist corrosion and hold up well in all weather conditions. Each cap screws on easily and stays securely in place, so you can drive with confidence. The pack includes four caps, one for each tire, giving your car a uniform and polished appearance.

These caps are designed to fit a wide range of Peugeot models, including the 206, 207, 208, 107, 106, 807, 407, 508, 205, 4008, 301, 607, and 108. Whether you are replacing old or missing caps or just want to upgrade the look of your wheels, this set is a practical and affordable choice.

Key Features and Benefits

- Aluminum alloy construction that resists corrosion and provides long-lasting durability

• Lightweight design at just 10g per cap that does not affect wheel balance

• Easy screw-on installation that requires no tools or professional help

• Waterproof and dustproof protection that keeps your valve stems clean and functional

• Available in multiple colors (Black, Red, Grey, Blue, Yellow) to match or accent your vehicle

Who Is This For

- Peugeot owners looking for a simple way to refresh the look of their wheels

• Drivers who want to protect their tire valves from dirt, dust, and moisture

• Anyone replacing lost or worn-out valve caps with a more durable metal option

• Car enthusiasts who like adding small, affordable custom touches to their vehicle

Usage Scenario

Marc noticed the plastic valve caps on his Peugeot 308 had cracked and faded after a long summer. He wanted something that would last longer and look better. He picked up a set of these aluminum alloy caps in grey to match his wheels. Within two minutes, he had screwed all four caps on by hand. Now his tires look cleaner and more complete, and he no longer worries about dirt getting into the valves.

Micro Comparison

Plastic valve caps often crack, fade, or get lost over time. These aluminum alloy caps are more durable and resistant to weather and corrosion. They offer a secure fit and come in several color options, so you can choose a look that complements your car without spending much.

Specifications

- Material: Aluminium alloy

• Weight: 10g per cap

• Color options: Black, Red, Grey, Blue, Yellow

• Compatible models: Peugeot 206, 207, 208, 107, 106, 807, 407, 508, 205, 4008, 301, 607, 108, GT Line models

Package Includes

- 4 x Colored aluminum alloy valve caps

Why You Will Love It

These valve caps are an easy and affordable way to add a personal touch to your Peugeot. They protect your valves from the elements while giving your wheels a cleaner, more finished look. With multiple colors to choose from and a simple screw-on design, you can upgrade your car in minutes.

Questions and Answers

Question: Will these caps fit my Peugeot 208?

Answer: Yes, these caps are compatible with Peugeot 208 and many other Peugeot models listed in the description.

Question: Do I need any tools to install these valve caps?

Answer: No tools are needed. Simply unscrew your old caps and screw these on by hand.

Question: Are these caps weather resistant?

Answer: Yes, the aluminum alloy material resists corrosion and is waterproof, so they hold up well in rain and sun.

Question: How much does each cap weigh?

Answer: Each cap weighs about 10 grams, which is light enough not to affect your wheel balance.

Question: What colors are available?

Answer: The caps come in Black, Red, Grey, Blue, and Yellow so you can choose a color that matches your style.

This car tire air chuck inflator pump valve connector is a clip-on adapter designed for quick and easy tire inflation. Made from durable brass, it provides a secure and reliable connection to your tire valve. It is a practical tool for any vehicle owner.

Checking and inflating your tires should be a simple task. This brass tire valve connector makes it easy by clipping directly onto the valve stem, leaving your hands free. It works with standard inflatable pumps and is built to last through many uses. Say goodbye to struggling with loose fittings and hello to efficient tire maintenance.

This clip-on adapter is designed for convenience and durability. The brass construction resists corrosion and wear, ensuring a long service life. Its compact size makes it easy to store in your glove box or tool kit, so you are always prepared for a low tire.

Whether you are topping off your tires at home or dealing with a slow leak on the road, this air chuck inflator provides a reliable solution. It is a simple upgrade that makes a big difference in your tire maintenance routine.

Key Features and Benefits

- Clip-on design that securely attaches to the tire valve for a hands-free inflation experience.

• Brass construction that offers excellent durability and resistance to corrosion for long-lasting use.

• Compatible with 6mm and 8mm valve sizes for use on a wide range of vehicles and tires.

• Compact and lightweight design that is easy to store in your vehicle for on-the-go tire maintenance.

• Provides a tight seal to minimize air loss during inflation for more efficient pumping.

Who Is This For

- Car owners looking for a reliable and easy-to-use tire inflator adapter for home maintenance.

• Truck and SUV drivers who need a durable connector that can handle frequent use.

• DIY mechanics and hobbyists who want a hands-free solution for inflating tires on various equipment.

• Anyone who wants a simple, no-fuss tool to keep in their vehicle for emergency tire inflation.

Usage Scenario

Mark noticed his car's tire pressure light was on as he was leaving for work. He pulled out his portable air compressor and attached this brass clip-on adapter to the valve. The clip held firmly, allowing him to check his tire gauge and add air without holding the hose. Within minutes, his tire was properly inflated, and he was back on the road without any hassle.

Micro Comparison

Unlike standard screw-on chucks that can be fiddly and time-consuming, this clip-on adapter offers a quick and secure connection. Its durable brass body is a step up from plastic alternatives, providing better reliability and a longer lifespan. This adapter is a practical choice for anyone who values efficiency and durability in their tools.

Specifications

- Material: Brass

• Size Options: 6mm, 8mm

Package Includes

- 1 x Car Tire Air Chuck Inflator Pump Valve Connector

Why You Will Love It

You will love the convenience of a hands-free tire inflation tool that saves you time and effort. The solid brass construction gives you confidence that this adapter will last for years. It is a small investment that makes a routine task much more pleasant and efficient.

Questions and Answers

Question: Is this adapter compatible with all standard tire valves?

Answer: Yes, it is designed to work with standard Schrader valves found on most cars, trucks, and SUVs.

Question: How do I use this clip-on air chuck?

Answer: Simply push the chuck onto the tire valve stem until it clips into place. It will hold securely, leaving your hands free.

Question: Can I use this with a portable air compressor?

Answer: Yes, it is compatible with most portable and stationary inflatable pumps that have a standard connector.

Question: Is the brass material resistant to rust?

Answer: Yes, brass is naturally resistant to corrosion and rust, making it a durable choice for this application.

Question: Does this adapter come in a set of two?

Answer: No, the package includes one adapter. You can purchase multiple units if needed for different vehicles or tools.

Keep your Opel Insignia B running safely with this set of four 433MHz TPMS tire pressure sensors. Designed for 2017-2019 models, these sensors provide accurate tire pressure readings to help you avoid flats and improve fuel efficiency.

These sensors come pre-programmed for your vehicle, so no additional programming is needed. They are a direct replacement for the original parts, making installation straightforward for a trained professional. The 433MHz frequency ensures reliable communication with your car's monitoring system.

Monitoring your tire pressure is essential for safe driving. Under-inflated tires can reduce fuel economy and increase wear. With these TPMS sensors, you get real-time pressure updates directly on your dashboard, giving you peace of mind on every journey.

Built with a PCBA board and battery, each sensor is designed for long-lasting performance. The set includes four sensors, covering all your wheels for a complete system upgrade. Just confirm your vehicle's compatibility before ordering to ensure a perfect fit.

Key Features and Benefits

- 433MHz frequency that ensures stable and reliable communication with your vehicle's TPMS system

• Pre-programmed for your specific make, model, and year so no sensor programming is required

• Direct replacement for original part numbers 13597645, 13512347, 13540606, and 39186445 for a simple swap

• PCBA board and battery construction that provides durable and long-lasting performance

• Set of four sensors that gives you a complete tire pressure monitoring solution for all wheels

Who Is This For

- Opel Insignia B (Z18) owners with models built between 2017 and 2019

• Drivers looking to replace worn or faulty original TPMS sensors with a direct-fit option

• Vauxhall Insignia owners from 2017 to 2019 seeking a reliable tire pressure monitoring upgrade

• Vehicle owners who want to maintain proper tire pressure for better fuel economy and safety

Usage Scenario

Mark noticed his Opel Insignia B's tire pressure warning light flickering on his daily commute. After checking the tires manually, he found the original sensors were failing. He ordered this 4-pack of 433MHz TPMS sensors and had them installed by his mechanic. The warning light turned off immediately, and he now sees accurate tire pressure readings on his dashboard. He feels safer driving with his family, knowing he will get an early warning if a tire loses pressure.

Micro Comparison

Many generic TPMS sensors require programming or may not match your car's frequency. This set is pre-programmed for your Opel Insignia B and operates on the correct 433MHz frequency. That means no extra steps and no compatibility guesswork, just a direct replacement that works right away.

Specifications

- Product Frequency: 433MHz

• Material: PCBA board and battery

• Compatible Part Numbers: 13512347, 13540606, 13597645, 39186445

• OEM Number: 13597645

• Matching Requirement: EL-50448 tool

Package Includes

- 4 x TPMS Tire Pressure Sensors

Why You Will Love It

You will love the confidence that comes from knowing your tire pressure is always monitored. These sensors take the guesswork out of tire maintenance, so you can focus on the road. It is a simple upgrade that keeps you and your passengers safe.

Questions and Answers

Question: Do these sensors work with my 2018 Opel Insignia B?

Answer: Yes, these sensors are designed for Opel Insignia B (Z18) models from 2017 to 2019.

Question: Do I need to program these sensors before installation?

Answer: No, they come pre-programmed for your specific vehicle make, model, and year.

Question: What tool is required for activation?

Answer: You will need an EL-50448 tool or a compatible scan tool to activate the sensors after installation.

Question: Are these sensors compatible with Vauxhall Insignia models?

Answer: Yes, they fit Vauxhall Insignia models from 2017 to 2019.

Question: Do I need to replace all four sensors at once?

Answer: It is recommended to replace all four at the same time for consistent performance and accurate readings.

Keep your Ford or compatible vehicle running safely with this set of four 433MHz TPMS tire pressure sensors. Designed as a direct replacement for multiple Ford models, this kit comes pre-programmed for your specific vehicle's make, model, and year. No complex programming is needed, just activate them with an EL-50449 scan tool and perform a simplified relearn using an OBDII tool. This set offers a reliable and straightforward way to maintain accurate tire pressure monitoring and improve your driving safety.

Each sensor is built with a durable PCBA board and battery, ensuring stable and sensitive performance on the road. The set is a perfect aftermarket solution for vehicles that use the F2GT-1A180-DE or compatible part numbers. By replacing faulty or dead sensors, you can restore your vehicle's tire pressure monitoring system (TPMS) functionality and avoid the risks of under-inflated tires, such as poor fuel economy or uneven tire wear.

Installation is recommended to be performed by a trained professional. Before ordering, confirm your vehicle's required part number to ensure a perfect fit. This set provides a cost-effective and high-quality replacement for your car's safety system.

Key Features and Benefits

- Pre-programmed for your specific vehicle that eliminates the need for complex sensor setup

• 100% brand new construction that provides reliable and long-lasting performance

• 433MHz frequency that ensures stable and sensitive signal transmission

• Durable PCBA board and battery that withstands road conditions for consistent monitoring

• Direct replacement design that simplifies the installation process for trained professionals

• Perfect aftermarket solution that offers a more realistic price compared to dealership options

Who Is This For

- Ford owners with a vehicle listed in the compatible models list who need a direct replacement TPMS sensor

• Car owners whose TPMS warning light is on due to a dead or faulty original sensor

• Mechanics or DIY enthusiasts looking for a cost-effective, pre-programmed sensor set for a repair job

• Anyone wanting to maintain proper tire pressure for improved safety and fuel efficiency

Usage Scenario

Mark noticed his Ford Edge's tire pressure warning light had been on for a week. After checking the tires and finding no leaks, he knew one of the original sensors had failed. He ordered this set of four 433MHz sensors. After confirming his vehicle's part number, he had a professional install them. The technician activated them with an EL-50449 tool and performed the OBDII relearn. The warning light turned off, and Mark could drive with confidence knowing his tire pressure was being monitored again.

Micro Comparison

Unlike some universal sensors that require complex programming or cloning, this set comes pre-programmed for your specific vehicle. This saves you time and reduces the chance of installation errors. While some aftermarket sensors may use cheaper materials, this set features a durable PCBA board and battery for stable and sensitive performance, offering a reliable and cost-effective replacement for your car's original equipment.

Specifications

Material: PCBA board and battery

Frequency: 433MHz

Model Number: F2GT-1A180-CB, F2GT-1A180-CC, F2GT-1A180-CD, F2GT-1A180-DC

OEM Number: F2GT-1A180-DE

Sensor P/N: F2GT-1A150-CB; F2GT-1A180-CB; F2GT-1A180-CC; F2GT-1A180-CD; F2GT-1A180-CE; F2GT-1A180-DB; F2GT-1A180-DC; F2GT-1A180-DD; F2GT-1A180-DE; GL3T-1A180-CA

Note: Product models are shipped randomly.

Package Includes

- Set of 4 TPMS Tire Pressure Sensors

Why You Will Love It

You will love the peace of mind that comes from a fully functional TPMS. This set provides a straightforward, no-programming-required solution that saves you time and money. It is a simple, high-quality upgrade that helps you drive safer and more efficiently.

Questions and Answers

Question: Do I need to program these sensors myself?

Answer: No, these sensors come pre-programmed for your specific vehicle's make, model, and year. You only need to activate them with an EL-50449 scan tool.

Question: What tool is required to activate these sensors?

Answer: You will need an EL-50449 scan tool to activate them. A simplified relearn process is then performed using an OBDII tool.

Question: Which Ford models are these sensors compatible with?

Answer: They are compatible with many Ford models, including the Edge, Fiesta, Focus IV, S-Max, Tourneo Connect, and others listed in the specifications.

Question: Are these sensors 100% brand new?

Answer: Yes, these are 100% brand new sensors built with a durable PCBA board and battery.

Question: Should I install these sensors myself?

Answer: Installation is recommended to be performed only by a trained professional to ensure proper fit and function.

Question: What should I do if I am unsure about the correct part number?

Answer: Please confirm the part number on your old sensor before ordering. If you are unsure, contact us before placing your order to avoid a wrong purchase.

Keep your tires at the right pressure with this set of four 433MHz TPMS sensors. Designed for a wide range of DFSK, Fencon, AITO, and SERES vehicles, these sensors help you monitor tire pressure in real time. The set comes pre-programmed for your specific vehicle model, so no sensor programming is needed on your end.

Each sensor uses a PCBA board and battery to deliver accurate readings directly to your dashboard. The 3641050-FS01 model is a direct replacement for your original equipment, offering a simple way to restore or upgrade your tire pressure monitoring system.

Installation is straightforward for a trained professional. After installation, the sensors need to be activated using a scan tool or through a relearn procedure with an OBDII tool. This ensures the sensors sync correctly with your vehicle's system.

Driving with properly inflated tires improves fuel efficiency, extends tire life, and enhances overall road safety. These TPMS sensors provide the peace of mind that comes with knowing your tire pressure is always within the recommended range.

Key Features and Benefits

- 433MHz frequency that provides reliable tire pressure data to your vehicle's monitoring system

• Pre-programmed for your make, model, and year so you can install without complex programming steps

• PCBA board and battery construction that delivers durable performance inside the tire environment

• OEM number 3641050-FS01 matching your original part for a direct fit replacement

• OBDII relearn compatibility that makes activation simple with the right scan tool

Who Is This For

- Drivers of DFSK Landian E3 (2023-2025), E5 (2023-2025), or Fencon models needing a TPMS replacement

• AITO M5, M7, and M9 owners looking for a direct-fit sensor set without programming hassle

• SERES SF5 owners who want to restore their factory tire pressure monitoring functionality

• Vehicle owners who prefer to have a professional install pre-programmed sensors for reliable results

Usage Scenario

Carlos noticed the tire pressure warning light on his AITO M5 dashboard flickering on and off. After checking his tires manually, he found one rear tire was consistently low. Rather than ignoring the warning, he ordered this set of four TPMS sensors. A local tire shop installed them in under an hour and used an OBDII tool to complete the relearn process. Now his dashboard shows accurate pressure readings for all four tires, and he no longer worries about underinflated tires affecting his daily commute.

Micro Comparison

Unlike universal TPMS sensors that require manual programming for each vehicle, these sensors come pre-programmed for your specific make, model, and year. This saves you time and reduces the risk of setup errors. The set includes four sensors, giving you a complete replacement for all wheels in one package.

Specifications

Material: PCBA board and battery

Model Number: 3641050-FS01

OEM NO.: 3641050-FS01

Request matching tool: OBD

Package Includes

- 4 x TPMS Tire Pressure Monitoring Sensors

Why You Will Love It

No complicated programming means less time spent figuring out installation and more time driving safely. These sensors restore your vehicle's ability to monitor tire pressure automatically. You get the confidence of knowing your tires are properly inflated every time you get behind the wheel.

Questions and Answers

Question: Do I need to program these sensors before installing them?

Answer: No, these sensors are pre-programmed for your specific vehicle make, model, and year. You only need to activate them using a scan tool or OBDII relearn procedure after installation.

Question: Which vehicles are these TPMS sensors compatible with?

Answer: They are compatible with DFSK Landian E3, E5, Fencon 500, 580, S560, ix5, ix7, AITO M5, M7, M9, and SERES SF5 models within specific production years. Please check the full list to confirm your vehicle.

Question: What is the frequency of these sensors?

Answer: These sensors operate at 433MHz, which is the standard frequency used by most modern vehicles for tire pressure monitoring.

Question: Can I install these sensors myself?

Answer: Installation of TPMS sensors is recommended to be performed only by trained professionals. The sensors need to be mounted inside the tire and activated with an OBDII tool.

Question: How do I activate the sensors after installation?

Answer: You need to use a scan tool or perform a relearn procedure using an OBDII tool. This syncs the sensors with your vehicle's monitoring system.

Question: What should I check before ordering?

Answer: Confirm that the OE number (part number 3641050-FS01) matches your original sensor. Also verify that your vehicle make, model, and production year are listed in the compatibility table.

Question: Will these sensors work if my vehicle is not listed in the description?

Answer: We recommend contacting us before ordering if your vehicle is not listed. Ordering the wrong part may not be refundable, so it is important to confirm compatibility first.