Key Features

• Stainless Steel Build — It is made of stainless steel, the material listed for these decorative strips.

Product Specifications

• Material: Stainless Steel
• Sticker Placement: Gear Panel

What It Is / How It Works

These are decorative stickers and trim strips made of stainless steel for the gear panel area of the interior, sold for the BMW X5 and X6 (E70, E71) styling listing.

Who It's For / Use Cases

Car owners who want a metal accent around the gearshift area of an interior often choose decorative trim strips like these. They suit drivers who want to refresh the look of a console without changing any functional parts of the car.

How to Use / Care

1. Use them as decorative trim around the gearshift frame in the BMW X5 and X6 E70 E71 interior.

How to Choose

Trim strips for a console gearshift frame are chosen first by vehicle fit, so confirm that the listed BMW model matches your car.

Frequently Asked Questions

What is it made of?
It is made of stainless steel, the material listed in the specifications.

Where is it placed?
Its sticker placement is the gear panel, as listed in the specifications.

Key Features

• BMW G30 G38 Fit — It fits the BMW New 5 Series G30 and G38 from 2018 to 2022.
• Chrome Silver ABS — The trim is made of ABS with a chrome silver finish.
• Nine-Piece Set — One set holds 9 pieces that cover 10 buttons.
• BMW New X3 G01 — It fits the BMW New X3 G01 from 2018 to 2022.

Product Specifications

• Material: ABS Chrome Silver
• Set contents: 9 pieces covering 10 buttons
• Model years: 2018-2022

What It Is / How It Works

This steering wheel switch button cover trim set is a group of interior trim pieces for the steering wheel buttons of BMW vehicles. The set is made of ABS with a chrome silver finish and includes 9 pieces covering 10 buttons.

Who It's For / Use Cases

Button cover trims suit car owners who want to refresh the interior area around the steering wheel controls. They suit owners who prefer a coordinated set of matching trim pieces over single loose parts, and they suit people shopping for interior accessories for the vehicle models and model years shown in Product Specifications.

How to Use / Care

1. Use the set as interior car steering wheel switch button cover trim stickers.
2. Use the 9-piece set for the steering wheel buttons it is sold for, covering the 10 buttons it includes.

How to Choose

Start with the vehicle model and model years, since steering wheel button layouts can differ between models. Check the model years in Product Specifications, then compare the piece count with the number of buttons you want to cover. Choose the chrome silver ABS finish if you want a metallic look that matches other chrome interior trim.

Frequently Asked Questions

Which vehicles is this set for?
It is for the BMW New 5 Series G30 and G38 (2018-2022) and the BMW New X3 G01 (2018-2022).

What material is the set made of?
The set is made of ABS with a chrome silver finish.

How many pieces come in one set?
One set has 9 pieces that cover 10 buttons.

How is this set sold?
It is sold as interior car steering wheel switch button cover trim stickers.

Key Features

• Vehicle-Specific Fit — It is built as a vehicle specific fit for the Tesla Model Y rear trunk door.
• Molded Curved Edges — The curved lines are molded to follow the original car, with a close fit to the edges and no effect on the car's original functions.
• Reserved Light Openings — Reserved hole positions leave the original light unblocked.
• Scratch-Resistant Build — It is molded from the original car design and is scratch resistant, wear-resistant, and easy to handle, with a non-destructive installation.

Product Specifications

• Color: Black
• Material: Artificial leather
• Vehicle fit type: Vehicle specific fit
• Vehicle: Tesla Model Y, 2020-2024
• Construction: Handmade
• Quantity: 1 piece

What It Is / How It Works

This trunk tailgate guard mat is a rear trunk door protector made for the Tesla Model Y. It is made of artificial leather, is black, and is handmade with a vehicle specific fit.

Who It's For / Use Cases

Trunk tailgate guard mats suit drivers who want a protective layer on the rear trunk door area, especially those who load cargo or kneel at the tailgate often. They fit owners who prefer a cover shaped to the trunk opening rather than a loose universal pad. Owners who want to keep the rear interior tidy may also find them useful.

How to Use / Care

1. Use it to guard the rear trunk tailgate of a Tesla Model Y against dirt and everyday wear.

How to Choose

Start with the vehicle. Choose a mat made for your exact model and year range, here the Tesla Model Y 2020-2024, and confirm that match before buying. Next, look at the material. This design is artificial leather, so compare that surface with your own preference for feel and cleaning. Finally, consider the fit type, since a vehicle specific fit is shaped to the original trunk edges.

Frequently Asked Questions

Which vehicle is this guard made for?
It is made for the Tesla Model Y, listed for 2020-2024 models, with a vehicle specific fit.

What is it made of?
It is made of artificial leather and is black.

Does it block the car's light openings?
The design has reserved hole positions that leave the original light unblocked.

How is it installed?
It is described as a non-destructive installation, and its curved lines are molded to follow the car's original shape.

Key Features

• ABS Chrome-Look Finish — It is made of ABS plastic with a chrome-look silver finish.
• Nine-Piece Set — The set has 9 pieces that cover 10 buttons.
• Listed BMW Fitment — It fits the BMW New 5 Series G30/G38 (2018-2022) and the BMW New X3 (G01) (2018-2022).

Product Specifications

• Material: ABS plastic
• Set Contents: 9 pieces covering 10 buttons
• Compatible models: For BMW New 5 Series G30/G38 (2018-2022); for BMW New X3 (G01) (2018-2022)

What It Is / How It Works

This steering wheel button cover trim set is a group of small interior trim pieces that sit over the switch buttons on a steering wheel. The set has 9 pieces covering 10 buttons and is made of ABS plastic with a chrome-look silver finish.

Who It's For / Use Cases

Owners of BMW New 5 Series G30/G38 and New X3 G01 vehicles from 2018-2022 who want to refresh the look of the steering wheel switch area may consider this set.

How to Use / Care

1. Use the 9-piece set as steering wheel switch button cover trims.
2. Place the trim pieces over the steering wheel switch buttons of the listed BMW model.

How to Choose

Start by matching your model and model years to the Compatible models row in Product Specifications, which lists the BMW New 5 Series G30/G38 and New X3 G01 for 2018-2022.

The trim is available in silver. The trim is silver.

Frequently Asked Questions

Which BMW models does it fit?
It fits the BMW New 5 Series G30/G38 (2018-2022) and the BMW New X3 (G01) (2018-2022). The Compatible models row in Product Specifications gives the full listing.

How many pieces are in the set?
The set has 9 pieces that cover 10 buttons.

What is it made of?
It is made of ABS plastic with a chrome-look silver finish.

What colour is it?
The finish is silver.

Is it sold as one set or as single pieces?
It is sold as one set of 9 pieces that cover 10 buttons.

Key Features

• Solid Build — It has a more solid build.
• Replacement Part — It is sold as a replacement part for the armrest switch.

Product Specifications

• Fitment Type: Direct Replacement
• Intended Use: For BMW 5 Series F10 F11 F18
• Model codes: 520, 523, 525, 528, 530, 535
• Model years: F10, F11, F18: 2011-2013; F10 LCI, F11 LCI, F18 LCI: 2014-2017
• Drive side: Left-hand drive only
• Placement on Vehicle: Central Console
• Interchange Part Number: 5116 9171 552, 5116 9206 721, 5116 9277 348
• Color: Silver or Black
• Item Length: 7 cm (2.76 in)
• Item Width: 5 cm (1.97 in)
• Item Height: 0.3 cm (0.12 in)

What It Is / How It Works

This switch catch button is a replacement armrest part for the central console glove box on the BMW 5 Series F10, F11 and F18. It is sold as a 2-piece set.

Who It's For / Use Cases

Switch catch buttons like this suit owners of left-hand-drive BMW 5 Series F10, F11 and F18 cars who need a replacement for the central armrest glove box switch. They are a practical choice for anyone who wants the armrest box to close and release properly again.

How to Use / Care

1. Fit it as a replacement for the central armrest glove box switch catch button on a BMW 5 Series F10, F11 or F18, 520 model, 2011-2017.
2. Confirm the car is left-hand drive before fitting, since the part only fits left-hand-drive vehicles.

How to Choose

Start with your drive side, because the part only fits left-hand-drive vehicles. Choose Silver or Black to suit the interior.

Frequently Asked Questions

Which BMW models is it for?
It is for the BMW 5 Series F10, F11 and F18, in the 520, 523, 525, 528, 530 and 535 models from 2011-2017.

Does it fit right-hand-drive cars?
No. It fits left-hand-drive vehicles only, so check your drive side before you order.

How big is it and how much does it weigh?
It is 7 cm (2.76 in) long, 5 cm (1.97 in) wide and 0.3 cm (0.12 in) high, and weighs 70 g (0.15 lb).

What colours does it come in?
It comes in Silver or Black. Pick the colour and model option that matches your car.

Is it a direct replacement part?
Yes. It is a direct replacement for the armrest switch catch button, and it is sold as a new, 100% new part.

Key Features

• Replacement Part — It is a replacement air vent slide clip, sold as a repair kit for the AC outlet grille.
• Vehicle Fit — It is made for BMW X5, X6 and X7 models in the G05, G06 and G07 series.
• PC and ABS Build — It is made of PC and ABS, with a rubberized coating.
• Left and Right Drive — It can be used on both left-hand and right-hand drive vehicles.

Product Specifications

• Material: PC and ABS, with rubberized coating
• Color: Original Black
• Intended use: For BMW X5 X6 X7
• Series: G05 G06 G07
• Model year: 2019-2021
• Part number: 64119458543

What It Is / How It Works

This is a replacement clip for the AC air vent outlet grille, sold as a repair kit for BMW X5, X6 and X7 vehicles in the G05, G06 and G07 series.

Who It's For / Use Cases

Owners of BMW X5, X6 and X7 models in the G05, G06 and G07 series who need a replacement for a loose or broken AC air vent outlet clip are the typical buyers. Parts buyers who source replacement vent clips for these models will find the same details useful.

How to Use / Care

1. Use it on either left-hand or right-hand drive vehicles, since it can be used on both.
2. If replacing the clip yourself is difficult, re-adjust it or take it to a local professional repair shop for installation.

How to Choose

Start with the vehicle: match the BMW X5, X6 or X7 model, the G05, G06 or G07 series and the 2019-2021 model year. The OEM number 64119458543 is the reference to match. If you want the new clip to suit the surrounding trim, check that the Original Black color fits your car.

Frequently Asked Questions

Which BMW models is this clip made for?
It is made for BMW X5, X6 and X7 models in the G05, G06 and G07 series, with a model year range of 2019-2021.

Does it work on left-hand and right-hand drive cars?
Yes. It can be used on both left-hand and right-hand drive vehicles, so the same clip applies whichever side the steering wheel is on.

What is the part number?
The OEM number on this clip is 64119458543.

What is it made of?
It is made of PC and ABS, with a rubberized coating, in an Original Black color.

Can I install it myself?
If replacing it yourself is difficult, you can re-adjust it or have a local professional repair shop install it.

Key Features

• Replacement Clip — It is a replacement clip for the AC vent grille outlet tab.
• No-Cut Connector — It connects with no cutting or splicing.
• Vehicle Fit — It fits the Volkswagen Tiguan from 2017 to 2021.
• Single Clip Slider — One AC vent grille clip slider is included.

Product Specifications

• Material: ABS
• Color: Black
• For Car Model: Volkswagen Tiguan; VW Volkswagen Tiguan
• Year: 2017-2021
• OEM number: 5NG819703
• Is it Powered: Non-powered

What It Is / How It Works

This AC vent grille outlet tab clip repair kit is a replacement clip made of ABS for the vent grille outlet tab. It fits the Volkswagen Tiguan from 2017 to 2021.

Who It's For / Use Cases

Drivers who need a replacement clip for the air-conditioning vent grille in a Volkswagen Tiguan from 2017 to 2021 are the typical buyers for this kind of part. Owners who prefer a non-powered, plastic clip that connects without cutting or splicing will find the listed specifications useful when comparing options.

How to Use / Care

1. Use it to repair the AC vent grille outlet tab clip.

How to Choose

Start with the vehicle. Match the Year and For Car Model rows in Product Specifications to your car before you buy. Confirm that the single clip slider in the pack covers the number of clips you need to replace.

Frequently Asked Questions

Which vehicle is it for?
It fits the Volkswagen Tiguan from 2017 to 2021.

What material is it made of?
It is made of ABS.

What is in the pack?
One AC vent grille clip slider is included.

What color is it?
It is black.

Key Features

• Slider Clip Design — Tabs of this type slide into a vent outlet to hold a grille in position.

Product Specifications

• Model designation: 530l; BMW 5 Series G38 525Li
• Is it Powered: Non-powered
• Part number: 64229329579

What It Is / How It Works

These are vent grille clips for air-conditioning ventilation outlets. Clips of this kind slide into an outlet opening and secure a grille tab in place, so the grille sits firmly within the vent.

Who It's For / Use Cases

Vent grille clips suit car owners and repair technicians who need to re-secure a loose air-conditioning vent grille, and anyone replacing a broken tab during interior trim work.

How to Use / Care

1. Use it to clip a vent grille tab into an air-conditioning ventilation outlet.

How to Choose

Start by matching the clip to the vent outlet it will secure, since grille tabs differ in shape and position from one outlet to another. Compare the tab profile with the outlet opening before buying, and choose the clip that fits the grille you are repairing. Check the part number and model designation in Product Specifications to confirm the clip suits your outlet before you order.

Frequently Asked Questions

Does this clip need power or a battery?
No. It is non-powered and does not need a battery or wiring to work.

What kind of product is this?
It is a vent grille clip for an air-conditioning ventilation outlet, used to secure a grille tab in place.

What should I check before buying?
Check that the tab profile matches the outlet opening you are repairing, because vent grille tabs vary in shape. Product Specifications gives the part number and model designation for matching.

How is the grille secured?
The clip slides into the outlet and holds the grille tab in its opening.

Key Features

• Replacement Part — It is a replacement part for the vent grille tab and slider clip.

Product Specifications

• Material: PC, Rubberized Coating
• Color: Original Black
• Compatible models: Skoda Kodiaq 2016-2022; Skoda Karoq 2018-2025
• Part numbers: 56G819701, 56G819702, 56G820951

What It Is / How It Works

This air conditioner vent grille clip repair kit contains replacement tab and slider clips for the air vent outlets on the Skoda Kodiaq and Skoda Karoq. The clips cover left, right, middle and rear vent positions, and they are made of PC with a rubberized coating.

Who It's For / Use Cases

Vent grille clip repair kits suit owners who need a replacement tab or slider clip for an air conditioning vent grille. They are useful for drivers who want to replace a single damaged clip without replacing the whole vent assembly.

How to Use / Care

1. Use it to repair a tab or slider clip on the air conditioner vent grille of a Skoda Kodiaq or Skoda Karoq.

How to Choose

Start with the vehicle fit. Match the model and year range to your car, and note whether it is a left steering wheel car (LHD) or a right steering wheel car (RHD).

Frequently Asked Questions

Which vehicles does it fit?
It fits the Skoda Kodiaq 2016-2022 and the Skoda Karoq 2018-2025.

Does it fit both left-hand and right-hand drive cars?
It fits both left steering wheel cars (LHD) and right steering wheel cars (RHD).

Which part number is for which position?
56G819701 is the left position, 56G819702 is the right position, 56G820951 and 56G820952 are the middle position, and 565819203 is the rear position.

What is the clip made of?
It is made of PC with a rubberized coating.

What color is it?
The color is Original Black.

Key Features

• Tesla Model Y Range — It is made for the Tesla Model Y in the 2021–2025 model range.

Product Specifications

• Compatible models: Tesla Model 3; Tesla Model Y (2021–2025); Tesla Model 3 Y Highland Juniper 2021–2025
• Placement: Under seat

What It Is / How It Works

This is an under-seat air outlet cover, a car interior accessory for the air vent beneath the seat. Covers like this are a small category of car interior accessories, made to suit a specific vehicle.

Who It's For / Use Cases

Tesla Model 3 owners, and owners of a 2021–2025 Tesla Model Y, who want a cover for the under-seat air outlet will find this type of accessory suits that need.

How to Use / Care

1. Use it to cover the under-seat air outlet in the car.

How to Choose

Start with the vehicle. Check that your car is a Tesla Model 3 or a Tesla Model Y from 2021 to 2025 before you order, since the fit depends on the model. Next, look at the under-seat air outlet in your car and confirm it is the vent this accessory is meant to cover. Choose the cover for the vehicle you drive.

Frequently Asked Questions

Which vehicles does it fit?
It fits the Tesla Model 3 and the Tesla Model Y from 2021 to 2025. The Compatible models row in Product Specifications lists both.

What does it cover?
It is a cover for the air outlet under the seat, in the car interior.

Who makes it?
The brand is YZ.

Is it a car interior accessory?
Yes. It is an accessory for the car interior, and it is placed under the seat over the air outlet.

Key Features

• Carbon Fiber Look — The finish has a carbon fiber appearance.
• Left-Hand Drive Only — It is made only for left-hand drive vehicles.
• One Handle Per Pack — The pack contains one interior handle for the front left door.

Product Specifications

• Material: Plastic
• Color: Carbon fiber look, black, beige
• Pack: One interior handle

What It Is / How It Works

This is a carbon fiber style interior door handle for the front left door. It fits the BMW X3 F25 and BMW X4 F26 from 2011-2017. Interior door handles are the grips inside a car door that are used to open it from the cabin side.

Who It's For / Use Cases

Replacement interior door handles suit car owners who need to swap a worn or damaged inner handle on the front left door. This one suits owners of left-hand drive BMW X3 F25 and X4 F26 models from 2011-2017 who want a carbon fiber look inside the cabin.

How to Use / Care

1. Use it to replace the front left interior door handle on a left-hand drive BMW X3 F25 or X4 F26 from 2011-2017.

How to Choose

Start with the vehicle: confirm the car is a BMW X3 F25 or X4 F26 from 2011-2017 and that it is left-hand drive, since this handle is made only for LHD vehicles. Check that the front left door is the position you need before you order, so the handle matches the door it replaces.

Frequently Asked Questions

Which BMW models does it fit?
It fits the BMW X3 F25 and BMW X4 F26 from 2011-2017.

Does it work on right-hand drive cars?
It is made only for left-hand drive vehicles, so it is not made for right-hand drive cars.

What colors does it come in?
It comes in black, beige, and a carbon fiber look.

What is it made of?
It is made of plastic.

How many handles are in one pack?
The pack contains one interior handle for the front left door.

Key Features

• Genuine Leather Cover — The cover is genuine leather wrap over an inner cover made of ABS+PC.
• BMW 5 Series Fit — It fits the BMW 5 Series F10, F11 and F18 (2010–2017), in the 520, 523, 525, 528 and 530 versions.
• Five Color Options — It comes in black, beige, oyster, red brown and carbon fiber pattern.

Product Specifications

• Compatible models: BMW 5 Series F10, F11, F18 (2010–2017); 520, 523, 525, 528, 530; BMW5Series Left/Right
• Material: Cover: genuine leather wrap; inner cover: ABS+PC
• Color: Black, Beige, Oyster, Red brown, Carbon fiber pattern
• Set: 7 pieces
• Part number: 523i525i528i530i

What It Is / How It Works

This car interior window switch armrest is made for the BMW 5 Series F10, F11 and F18 (2010–2017), in the 520, 523, 525, 528 and 530 versions. The cover is genuine leather wrap over an inner cover of ABS+PC, and the part comes as a 7-piece set.

Who It's For / Use Cases

Owners of BMW 5 Series cars who are replacing a worn interior armrest part usually want a direct match for their model and year. Shoppers who want a leather-wrapped armrest in a color that suits the cabin will also find the color range useful when comparing options.

How to Use / Care

1. Use it as the interior window switch armrest for a compatible BMW 5 Series.

How to Choose

Start with the vehicle. Match the car to the model range and year listed in the Compatible models row in Product Specifications. Next, pick the color that suits the existing cabin trim. Leather-wrapped covers and hard inner covers are a common material choice for armrest parts, so compare the material row to see which build fits your needs.

Frequently Asked Questions

Which BMW models does it fit?
It fits the BMW 5 Series F10, F11 and F18 (2010–2017), in the 520, 523, 525, 528 and 530 versions. The Compatible models row in Product Specifications gives the same range.

What is the cover made of?
The cover is genuine leather wrap. The inner cover is ABS+PC.

Which colors are offered?
It comes in black, beige, oyster, red brown and carbon fiber pattern.

How many pieces are in the set?
The set contains 7 pieces.

Which models does the part number cover?
The part number is 523i525i528i530i, which covers the 523i, 525i, 528i and 530i versions.

Key Features

• Replacement Trim Part — It is a replacement part for the switch button panel on the center console lid armrest box.
• PC and ABS Build — It is made of PC and ABS with a rubber oil-painted finish.
• Benz S Class Fit — It is for the Benz S Class W222 from 2014-2020.
• Left and Right Hand Drive — It can be used on both LHD and RHD cars.

Product Specifications

• Intended use: For Benz S Class W222 2014-2020
• Material: PC and ABS with rubber oil painting
• Color: Light Beige, Oyster, Black
• Place on vehicle: Front Center Console

What It Is / How It Works

This car center console button cover is a replacement part for the switch button panel on the center console lid armrest box. It is for the Benz S Class W222 from 2014-2020.

Button covers of this type are trim pieces that sit over switch panels on a vehicle's center console, so the fit to the model and year matters more than anything else.

Who It's For / Use Cases

Car owners with a Benz S Class W222 from 2014-2020 who need to replace a worn or damaged switch button cover on the center console lid will find this type of part useful. Trim-replacement parts like this also suit owners who want the console area to look cleaner without replacing the whole armrest box.

How to Use / Care

1. Use it on either left-hand-drive or right-hand-drive cars.
2. If you cannot replace the part yourself, re-adjust it or take it to a local professional repair store for installation.

How to Choose

Start with the vehicle. Match the model and year to your car before ordering, since this part is for the Benz S Class W222 from 2014-2020. Light Beige, Oyster and Black are the colour options, so pick the one closest to the surrounding console finish.

Frequently Asked Questions

Which cars does it fit?
It is for the Benz S Class W222 from 2014-2020.

Can it be used on left-hand-drive and right-hand-drive cars?
It can be used on both LHD and RHD cars.

What is it made of?
It is made of PC and ABS with a rubber oil-painted finish.

What colours does it come in?
It comes in Light Beige, Oyster and Black.

How many pieces are needed for one car?
The price is for one piece, and two pieces are needed for one car.

Key Features

• Silicone Material — The cover is made of silicone and sits over the armrest box lid.

Product Specifications

• Material: Silicone

What It Is / How It Works

This silicone armrest box cover is a cushion pad that fits over the lid of a car's center console armrest. The cover is made of silicone. Armrest box covers are padded accessories that give the top of the armrest a cushioned surface.

Who It's For / Use Cases

Armrest box covers suit car owners who want a padded top on the center console armrest. They fit drivers and passengers who rest an arm on the console during longer drives, and they suit owners who want to update the look of the console without replacing the armrest itself.

How to Use / Care

1. Place the cover over the armrest box lid of the center console.
2. Rest your arm on the cushioned top of the cover as the armrest.

How to Choose

Measure the armrest lid of your center console before ordering, so the cover can be matched to the size of the lid. Consider the color and shape of the cover so it suits the interior trim around the armrest. Choose the cover that best matches the lid you plan to cover.

Frequently Asked Questions

What is the cover made of?
It is made of silicone. Silicone is the material named for this cover.

Where does the cover go?
It goes over the armrest box lid of a car's center console, where it gives the lid a cushioned top.

Who is it for?
It suits car owners who want a padded top on the center console armrest.

How do I pick the right size?
Measure the armrest lid of your center console and match that measurement to the cover before ordering.

Key Features

• Polyurethane Leather Padding — The padded top is polyurethane leather set over a plastic base.
• Fits Listed Skoda Models — It is made for the center console armrest lid of Skoda Octavia (1997-2011), Fabia (1999-2014), Roomster (2006-2015) and Rapid (2012-2018).
• Three Color Options — Available in black, gray or beige.
• One Piece Per Pack — Each pack holds one armrest lip cover.

Product Specifications

• Material: Polyurethane leather padding on a plastic base
• Color: Black, Gray, Beige
• Quantity: 1 piece

What It Is / How It Works

This center console armrest lid cover is a padded cover for the armrest lid of Skoda Octavia (1997-2011), Fabia (1999-2014), Roomster (2006-2015) and Rapid (2012-2018) cars. It is a polyurethane leather pad on a plastic base, sold as one piece in black, gray or beige.

Who It's For / Use Cases

Armrest lid covers suit owners of Skoda cars who want to refresh the padded lid of a center console armrest. Drivers who use the armrest often and want a neat, padded surface on the lid are the typical buyers for this kind of cover.

How to Use / Care

1. Use it to cover the padded lid of the center console armrest.

How to Choose

Start with the model and year range, because the cover is made for specific Skoda generations.

Frequently Asked Questions

What is the padding made of?
The padding is polyurethane leather, set on a plastic base.

What colors does it come in?
It comes in black, gray or beige.

How many pieces are in one pack?
Each pack holds one armrest lip cover, so the quantity is 1 piece.

What part of the car does it cover?
It covers the padded lid of the center console armrest in the Skoda models listed in the features section.

Key Features

• Carbon Fiber Style Finish — The finish is ABS with carbon fiber style spray paint, not genuine carbon fiber.
• Glossy Black Option — One option has a glossy black finish with a mirror-style shine.
• BYD Seal EV Fit — It is made for the BYD Seal EV 2023-2026.

Product Specifications

• Material: ABS
• Color: Carbon Fiber Look
• Compatible models: BYD Seal EV 2023-2026
• Model year: 2023, 2024, 2025, 2026
• Options: 8 pcs

What It Is / How It Works

These are ABS trim covers for the BYD Seal EV 2023-2026, offered in a carbon fiber look or glossy black. The set options cover parts such as the rearview mirrors, steering wheel, charging port cap, door handles, air vents and trunk switch.

Who It's For / Use Cases

Trim covers like these suit BYD Seal EV owners from 2023-2026 who want to change the look of the cabin trim and exterior door handles. Owners often pick a matching set so interior and exterior accents look consistent.

How to Use / Care

1. Stick on the piece using its pre-attached double-sided adhesive tape.
2. Heat the tapes with a lighter before installing.
3. Choose the piece that matches the part you are covering, such as the charging port cap trim or the steering wheel trim.

How to Choose

Pick the parts that match the spots you want to cover, then check the piece count for each option. Choose the carbon fiber look for a carbon-style finish, or glossy black for a mirror-style shine. Confirm that the BYD Seal EV 2023-2026 matches your vehicle before ordering.

Frequently Asked Questions

Is it real carbon fiber?
No. It is ABS plastic with a carbon fiber style spray paint.

Which vehicle is it for?
It is for the BYD Seal EV 2023-2026, in model years 2023, 2024, 2025 and 2026.

How is it attached?
Each piece has pre-attached double-sided adhesive tape. Heat the tapes with a lighter before installing.

How many pieces come in a set?
It depends on the option. The options are sets of 8 pcs exterior door handle covers and trims, 2 pcs rearview mirror covers, 4 pcs interior door handle surrounds, 2 pcs center console air vent covers and 3 pcs air vent covers behind the armrest box, plus single pieces for the charging port cap, steering wheel and trunk switch.

Who is the brand?
The brand is MIHUMOE.

Key Features

• Leather and Memory Cotton — Made from leather combined with memory cotton, a soft surface over a supportive filling.
• Slow Rebound Core — The memory cotton inner core rebounds slowly and compresses without deforming.
• Quilted Diamond Grid — The quilted diamond grid surface resists dirt and wear and is easy to clean.
• Elastic Mesh Fit — The elastic mesh is easy to disassemble and helps prevent scratches and wear after installation, with an anti-slip silicone base that helps it stay in place.
• Wider Shared Width — The wider size is made for sharing between the driver and passenger.

Product Specifications

• Material: Leather + Memory Cotton
• Color: Black, Rice, Grey, Brown
• Weight: 260 g (9.2 oz)
• Package Type: OPP bag

What It Is / How It Works

This car center console armrest cushion is a padded cover for the armrest box lid, made of leather combined with memory cotton. It is sold as a memory cotton armrest box cushion and is a practical accessory for a car interior.

Who It's For / Use Cases

Car armrest cushions suit drivers who rest an arm on the center console during longer trips and want a padded surface in place of a bare lid. They also suit owners who want a protective layer that helps guard an armrest box against scratches and everyday wear, and who prefer a cover that can be removed and refitted for cleaning.

How to Use / Care

1. Use it to cushion the car center console armrest.
2. Use it to protect the armrest box lid from scratches and wear.

How to Choose

Start with the size of your armrest box lid, then compare it with the dimensions in Product Specifications. Choose the color that matches your interior, since black, rice, grey and brown are available. Leather-surfaced armrest cushions with a memory cotton filling suit people who want a padded, cleanable top, while a thinner cover may suit a lid that is already well padded.

Frequently Asked Questions

What is this cushion made of?
It is made of leather combined with memory cotton. The memory cotton inner core rebounds slowly and compresses without deforming.

Is the surface easy to clean?
The quilted diamond grid surface is described as resistant to dirt and wear and easy to clean.

Which colors are available?
It comes in black, rice, grey and brown.

Will it slide around on the console?
The bottom is made of anti-slip silicone, which helps it stay in place. The elastic mesh is easy to disassemble and helps prevent scratches and wear after installation.

How much does it weigh?
It weighs 260 g (9.2 oz), which is a light cover that is easy to lift off and set back in place.

Key Features

• Replacement Part — It is sold as a replacement part for the AC vent grille tabs.
• PC and ABS Build — The clips are made of PC and ABS with a rubberized coating.

Product Specifications

• Material: PC and ABS
• Coating: Rubberized coating
• Color: Original Black
• Pack count: 6 pieces
• Compatible models: Maserati Quattroporte 2013-2020
• OE number: 670011357

What It Is / How It Works

These clips are a replacement part for AC vent grilles on the Maserati Quattroporte 2013-2020. AC vent clips are small tabs that help a vent grille stay secured in the dashboard.

Who It's For / Use Cases

Owners of a Maserati Quattroporte 2013-2020 who are repairing a loose or broken air vent grille will find this type of replacement clip useful. Repair shops that service this model may also keep a spare set on hand for vent repairs.

How to Use / Care

1. If the parts are hard to replace yourself, re-adjust them or take them to a local professional shop for installation.

How to Choose

Start with the vehicle. Confirm the Maserati Quattroporte 2013-2020 against the Compatible models row in Product Specifications.

Frequently Asked Questions

Which vehicle is this for?
It fits the Maserati Quattroporte 2013-2020. The Compatible models row in Product Specifications shows the same range.

How many clips are in the pack?
The pack has six clips. The same six clips serve the front and rear AC vents.

Do the clips fit left-hand and right-hand drive cars?
They fit both left-hand drive (LHD) and right-hand drive (RHD) cars, so one set covers either steering layout.

What material are the clips made of?
They are made of PC and ABS with a rubberized coating. The color is Original Black.

Can I replace the clips myself?
If the parts are hard to replace yourself, you can re-adjust them or take them to a local professional shop to have them installed.

Key Features

• Volvo XC60 Fit — It fits the Volvo XC60 from 2009-2017.
• Air Outlet Paddle — One piece per pack, sold as a Volvo XC60 air outlet paddle.

Product Specifications

• Material: ABS+PC
• Year: 2009-2017
• Powered: Non-powered
• Pack: 1 piece
• Part number: 39857377
• Compatible models: Volvo XC60 09-17 39857377

What It Is / How It Works

This is a front air conditioning clip for the Volvo XC60 from 2009-2017. Clips of this type hold or adjust the flap that directs airflow at a car's dashboard air outlet.

Who It's For / Use Cases

Car owners who need a replacement front air conditioning vent clip for a matching vehicle will find that a direct-replacement part suits a straightforward swap. Parts buyers replacing a worn or broken adjuster clip at the dashboard air outlet are the typical buyers for this kind of item.

How to Use / Care

1. Confirm the vehicle is a Volvo XC60 from 2009-2017 before fitting the clip.
2. Use the clip only as a direct replacement for the front air conditioning air outlet adjuster.
3. Do not use connectors that have not been properly cut or spliced.

How to Choose

Start with the vehicle: this clip is for the Volvo XC60 from 2009-2017, so match the model and year before buying. Check the material as well, since this one is ABS+PC. Each pack holds one piece.

Frequently Asked Questions

Which vehicle is this clip for?
It fits the Volvo XC60 from 2009-2017.

What is the clip made of?
It is made of ABS+PC.

What is the OEM number?
The OEM number is 39857377, which is also the part number listed in Product Specifications.

How many pieces come in a pack?
Each pack has one piece, a Volvo XC60 air outlet paddle.

Key Features

• Replacement Vent Tab — It replaces an air vent adjustment tab that is broken, worn, or missing.
• Center or Side Version — It comes as a center air vent tab or a side air vent tab. Left and right side tabs are the same part.
• OE-Style Fit — It is made to OEM specifications to fit the air vent assembly without modifying it.

Product Specifications

• Material: ABS
• Color: Black
• Compatible models: Q7 2006-2015
• Package Contents: 1 dashboard air vent tab clip

What It Is / How It Works

This car dashboard air vent tab clip is a replacement part for the adjustment tabs on a car's dashboard air vents. It is sold as one piece for either the center or the side air vent.

Who It's For / Use Cases

Vent tab clips suit car owners with a Q7 from 2006 to 2015 whose dashboard air vent adjustment tab has broken, worn, or gone missing. Owners who want the vent direction control to work smoothly again will find this part suited to that repair.

How to Use / Care

1. Use it to replace a broken, worn, or missing air vent tab on the dashboard.

How to Choose

Start with the vent position. The center air vent tab and the side air vent tab are sold as two different versions, so pick the one that matches the vent being repaired. If appearance matters, the black finish is the color to compare against the existing trim.

Frequently Asked Questions

Which vehicles does it fit?
It is made for Q7 models from 2006 to 2015 and is designed to fit the factory air vent assembly.

Is it for the center or the side vent?
It is sold in two versions: a center air vent tab and a side air vent tab. Left and right side tabs are the same part.

What is it made of?
It is made of ABS plastic.

Does the vent assembly need to be modified?
No. It is manufactured to OEM specifications so it fits the air vent assembly without modification.

How many pieces come in the pack?
The pack has one dashboard air vent tab clip.

Key Features

• Left and Right Pair — The set has one left and one right AC vent trim clip.
• Direct Replacement Clip — It is a direct replacement for a broken or damaged vent trim clip.
• Wide BMW Fit Range — It fits several BMW 1, 2, 3, 4, X3, X4 and Z4 models from 2017 to 2023.

Product Specifications

• Part Name: AC Vent Trim Clip
• Fitment Type: Direct Replacement
• Material: Plastic
• Piece Count: 1set
• Placement on Vehicle: Central, Left/Right

What It Is / How It Works

Vent trim clips are small clips that hold air outlet grille trim in place on a dashboard, so a single broken clip can leave the grille loose.

It is a direct replacement part sold as one set with a left clip and a right clip.

Who It's For / Use Cases

Vent trim clips suit car owners who need to replace one broken or missing clip on an air outlet grille without swapping the whole trim panel. They also suit anyone who wants a like-for-like plastic clip matched to the side of the car where the old clip was lost.

How to Use / Care

1. Use the left AC vent trim clip on the left side.
2. Use the right AC vent trim clip on the right side.
3. Use the AC vent trim clip as a direct replacement for a broken or damaged clip.

How to Choose

Choose by side first: the set has one left and one right clip, so match each piece to the matching side of the grille. Plastic clips are a practical choice for replacing a single worn clip in a trim grille.

Frequently Asked Questions

Which BMW models does it fit?
It fits the BMW 1 Series F40 (2020–2022), 2 Series F44 (2020–2022), 3 Series G20 and G28 (2019–2022), 4 Series G26 (2020–2022), X3 and X4 G01 G02 (2022), and Z4 G29 (2017–2023).

How many clips are in the set?
The set has one left clip and one right clip, sold as 1set.

What is it made of?
It is made of plastic, and it is sold as a direct replacement part.

Is it meant to replace a broken clip?
Yes. It is a direct replacement for a broken or damaged vent trim clip, so you can swap out only the clip that is worn or missing.

What is the part number?
The part number is 64119855415, and the part is named AC Vent Trim Clip.

Key Features

• Toyota Previa Fit — It fits the Toyota Previa 2004-2012.
• No Cutting Required — The connector is correct for fitting, so it needs no cutting or splicing.

Product Specifications

• Reference OE/OEM Number: 55650-28250, 55670-28250

What It Is / How It Works

This air conditioning vent outlet tab clip repair kit is an interior part for the front center A/C vent on Toyota Previa Estima vehicles. Tab clips of this kind hold a vent outlet part in place when a tab breaks.

Who It's For / Use Cases

Owners of a 2004-2012 Toyota Previa who need to repair a broken front center A/C vent outlet tab will find this clip suits that job. Auto repair shops working on this generation of Previa interior trim can also use it for the same repair.

How to Use / Care

1. If you are not sure how to fit the clip, request installation instructions or take it to a local auto repair shop.
2. Use it only on a Toyota Previa from 2004 to 2012.

How to Choose

Start with the vehicle. The fit is set for the Toyota Previa 2004-2012, so confirm your model year falls in that range before you choose this repair kit. If you are unsure which part matches your vent, a local auto repair shop can help you decide.

Frequently Asked Questions

Which vehicle is this clip for?
It fits the Toyota Previa 2004-2012.

Does it need cutting or splicing?
The connector is correct for fitting, so it needs no cutting or splicing.

What are the reference OE/OEM numbers?
The reference OE/OEM numbers are 55650-28250 and 55670-28250.

What if I am not sure how to fit it?
Installation instructions can be requested, or a local auto repair shop can fit it.

Should I confirm the model before ordering?
Confirm your Toyota Previa falls within 2004-2012 before you order, since the fit is set for that range.

Key Features

• Silver Finish — The piece has a silver color that suits the dashboard vent trim.
• ABS Construction — The piece is made from ABS plastic.
• F15/F16 Vehicle Fit — It is built for the BMW F15/F16 car model.
• Replacement Piece — It is designed as a replacement wind direction adjustment piece.
• No Cutting Needed — Connector fit is noted as correct, with no cutting or splicing needed.

Product Specifications

• Color: Silver
• Material: ABS
• Car Model: F15/F16; BMW X5 X6 F15 F16 AC
• Year: 2014-2019
• OEM Number: 64118253115
• Package Contents: 1 Wind Direction Adjustment Plectrum
• Powered: Non-powered

What It Is / How It Works

This air conditioning vent toggle piece is a replacement part for a dashboard air vent wind direction control. Air conditioning vent toggle pieces are small trim parts that let a driver change the direction of airflow from a vent. When one is worn, cracked, or missing, a matching replacement restores the look and feel of the dashboard vent row.

Who It's For / Use Cases

Car owners working on BMW F15 and F16 dashboards often look for replacement vent trim parts when a toggle piece is worn or missing. Independent repair shops and trim installers also use replacement vent pieces to finish interior work. Buyers who want a silver ABS piece for this model range will find the details below useful when comparing options.

How to Use / Care

1. Easy install and durable use.

How to Choose

Start by matching the car model and year range to your vehicle before ordering. This piece is listed for the F15/F16 model with a 2014-2019 year range, so confirm those details against your dashboard. Color is silver, and the material is ABS, so compare these against the trim around the vent you are replacing.

Check the piece count before buying. Light and screen differences can make the color look a little different from the real item, and measurements may vary by +/- 1-3cm.

Frequently Asked Questions

What material is this vent toggle piece made from?
It is made from ABS plastic and has a silver color, which helps it match common dashboard vent trim.

Which BMW models is it made for?
The fitment details list the F15/F16 car model with a 2014-2019 year range. Compare these details with your vehicle's model and year before ordering.

Is it a replacement piece or a new accessory?
It is designed as a replacement wind direction adjustment piece for the vent control, so it is meant to take the place of a worn or missing toggle piece.

Does installation require cutting or splicing?
The product notes state that the connector fit is correct and that no cutting or splicing is needed.

Is this piece powered or electronic?
It is non-powered, so it is a mechanical trim piece rather than an electronic part.

Why might the color look different from the photos?
Light conditions and different screens can change how the silver finish appears. Measurements may also vary by +/- 1-3cm.

Key Features

• Replacement Part — It is sold as a replacement part for the air conditioning vent slider clip.
• Solid Build — It has a more solid build and is not easy to break.

Product Specifications

• Application: LHD/RHD
• Material: PC and GF30 and ABS
• Weight: 0.1 kg (0.22 lb)

What It Is / How It Works

This air conditioning vent slider clip repair kit is a replacement part for the slider clip in a car air vent outlet grille. It is made for the Maserati Quattroporte M156 and can be used on both left-hand drive (LHD) and right-hand drive (RHD) cars.

Who It's For / Use Cases

Car owners who need to replace a vent slider clip on a car air conditioning outlet are the usual buyers for this category of repair part. Owners of cars with the steering wheel on either side may find this category useful, since the stated application covers both steering positions.

How to Use / Care

1. Use it to replace a worn or damaged slider clip in a car air conditioning vent outlet grille.

How to Choose

Start with the steering wheel position of your car, since the application is stated for both LHD and RHD. Next, compare the stated dimensions of 12 cm (4.7 in) and 5.3 cm (2.1 in) with the clip you are replacing. The material is PC and GF30 and ABS, so note that when comparing parts of similar plastic construction.

Frequently Asked Questions

Does it work for both left-hand and right-hand drive cars?
Yes. The application covers LHD and RHD, so it is stated to work with left-hand and right-hand drive steering wheel positions.

What material is it made from?
The stated material is PC and GF30 and ABS, and the Material row in Product Specifications shows the same materials.

What are the measurements and weight?
The stated measurements are 12 cm (4.7 in) and 5.3 cm (2.1 in), and the weight is 0.1 kg (0.22 lb).

Is it easy to break?
It has a more solid build and is not easy to break. It is made from PC and GF30 and ABS.

Which car is it made for?
It is made for the Maserati Quattroporte M156 and covers LHD and RHD steering wheel positions, as shown in the Application row of Product Specifications.

Key Features

• Compact Clip Size — The size given is 3 × 2.2 cm (1.18 × 0.87 in), a small size for dashboard trim work.
• It Fits Audi — It fits the Audi A4 B6 and B7 from 2002 to 2008.
• Dashboard AC Vent Clip — It is an air vent clip for the dashboard AC vent grill area.

Product Specifications

• Piece Count: 4 pcs
• Size: 3 × 2.2 cm (1.18 × 0.87 in)

What It Is / How It Works

This is a car dashboard AC air vent clip, sold as a 4-piece set for the air vent grill trim of an Audi A4 B6 or B7 from 2002 to 2008. The clips are small trim parts, each sized at 3 × 2.2 cm (1.18 × 0.87 in).

Who It's For / Use Cases

Car owners and repair shops who need replacement dashboard vent clips often buy a multi-piece set so several pieces are on hand at once. This type of set suits anyone doing trim work in the air vent area who wants more than one clip from a single order.

How to Use / Care

1. Fit the clips to the dashboard AC air vent grill on an Audi A4 B6 or B7, 2002–2008.
2. Compare the pieces in the set with the trim clips you are replacing before fitting.

How to Choose

Check the vehicle model and year against the air vent area you are repairing. Measure the clip you are replacing and compare it with the stated size before ordering. Hand measurements can vary, so compare with a small margin rather than an exact match.

Frequently Asked Questions

How many pieces come in the set?
The set contains 4 pieces, so all four are in one order.

What size are the clips?
The size given is 3 × 2.2 cm (1.18 × 0.87 in).

Are instructions included?
No, there are no instructions included in this kit.

Does the size vary?
Measurements are taken by hand, so allow a 0.5-1 inch difference (1 inch = 2.54 cm).

Key Features

• Replacement Part — Designed as a replacement for the AC vent grille clip slider on the Volkswagen Tiguan.
• ABS Plastic Build — Made from ABS plastic, a common material for interior vehicle trim parts.
• Non-Powered Part — This is a non-powered part, so it does not require a power source or wiring to operate.
• Direct Connector Design — Described with a correct connector and no cutting or splicing needed for installation.
• Tiguan 2017-2021 Listing — Listed for the Volkswagen Tiguan model years 2017-2021.

Product Specifications

• Material: ABS
• Year: 2017-2021
• Is it Powered: Non-powered
• Reference OE/OEM Number: 5NG819703, 5NG819704, 5NG857189
• Package Contents: 1 AC Vent Grille Clip Slider

What It Is / How It Works

This AC vent grille clip slider is an interior auto part designed to replace the clip slider on an air-conditioning vent grille. It is listed for the Volkswagen Tiguan 2017-2021 and is made from ABS plastic. Clip sliders of this type are small plastic components that hold a vent grille in place within the dashboard, so a matching replacement helps the grille sit correctly.

Who It's For / Use Cases

Independent repair shops and technicians who handle interior trim repairs also use replacement clip sliders when a single vent grille component needs to be swapped.

How to Use / Care

1. Install the part with the easy install approach described for this item, which is intended for durable use once fitted.
2. If you are unsure how to install it, request installation instructions from the seller, or have a local auto repair shop fit it for you.

How to Choose

Start by confirming the vehicle. The listing is for the Volkswagen Tiguan 2017-2021, so check that your car matches that model and year before you buy. If you are not certain, the seller can review your VIN and product pictures to help confirm suitability. Next, compare the part against the vent grille clip you are replacing so you know which clip slider position it needs to fill. Choose this item when you need a single replacement clip slider rather than a full vent assembly.

Frequently Asked Questions

Does this part need power or wiring?
No. It is a non-powered part and does not need a power source to work. The part is made from ABS plastic and mounts as a mechanical clip slider.

Which vehicle is this clip slider for?
It is listed for the Volkswagen Tiguan 2017-2021. Before you pay, confirm your car model, or send your VIN and product pictures to the seller so they can check suitability.

Do I need to cut or splice any wires to fit it?
No. The listing describes a correct connector with no cutting or splicing required, so installation does not call for modifying the vehicle's wiring.

What do I receive in the package?
The package contains 1 AC Vent Grille Clip Slider.

What if I am not sure how to install the part?
The seller can provide installation instructions, or you can have a local auto repair shop install the clip slider for you. Auto parts of this kind are professional products, so a repair shop is a practical option if you are unfamiliar with interior trim work.

Key Features

• Golf 7 and GTI Fit — It fits Golf 7, Golf 7.5 and GTI cars.
• Centre Vent Slider — One centre instrument panel air vent slider is included.

Product Specifications

• Vehicle fit: Golf 7 / 7.5 / GTI
• Weight: 0.1 kg (0.22 lb)
• Quantity: 1 slider

What It Is / How It Works

This is a car dashboard air conditioner vent slider, sold as a clip-type tab for the centre instrument panel air outlet. It is a small accessory for replacing or fitting a slider on the centre air vent of the dashboard.

Who It's For / Use Cases

Vent slider accessories suit car owners who need to replace a missing or worn slider on the centre dashboard air vent. They also suit owners who want a like-for-like part for a Golf 7, Golf 7.5 or GTI.

How to Use / Care

1. Use it as an air conditioner vent slider on the centre instrument panel air outlet of the car.

How to Choose

Start by matching the car model, since this slider is for Golf 7, Golf 7.5 and GTI cars. Check that the piece suits the centre instrument panel vent you are replacing, because vent slider shapes can differ between dashboard layouts.

Frequently Asked Questions

Which cars does it fit?
It fits Golf 7, Golf 7.5 and GTI cars.

How many pieces come in the pack?
The pack has one centre instrument panel air vent slider.

How much does it weigh?
It weighs 0.1 kg (0.22 lb).

How can I check that it suits my car?
Confirm your car is a Golf 7, Golf 7.5 or GTI, then compare the slider with the centre dashboard vent you are replacing.

What does a dashboard vent slider do?
Vent sliders on dashboard air outlets generally let you adjust the direction of the airflow from the vent.

Key Features

• Correct Connector — The correct connector means no cutting or splicing is needed.

Product Specifications

• Material: ABS+PC
• Package Contents: 1 air conditioner A/C air vent outlet tab clip repair kit
• Part number: 5E0819701

What It Is / How It Works

This is a replacement tab clip for a front air conditioning vent outlet. It is made of ABS+PC and comes as one repair kit.

Who It's For / Use Cases

Car owners who find a cracked or loose air vent tab clip on a dashboard outlet often need a direct replacement rather than a full vent assembly. Clips like this suit drivers who want to restore a worn vent to its original fit and keep the outlet working as designed, and who prefer a small, targeted repair part.

How to Use / Care

1. Use it to replace a broken tab clip on a front air conditioning outlet.

How to Choose

Start by confirming the vehicle model and model years listed Product Specifications (Compatible models) and Product Specifications. Choose a clip that matches the outlet design you need to repair.

Frequently Asked Questions

What is it made of?
It is made of ABS+PC.

What does the package include?
The package has one air conditioner A/C air vent outlet tab clip repair kit.

Does it need cutting or splicing?
No. It uses a correct connector, so cutting or splicing is not required.

Which OEM numbers does it match?
The OEM numbers are 5E0820951, 5ED819702 and 5ED819701. The part number is 5E0819701.

Key Features

• ABS Construction — It is made of ABS, so the clip is a plastic part for interior use.
• Outlet Tab Clip — It is an air conditioning outlet vent tab clip sold as one piece.
• Skoda Kodiaq Fit — It fits Skoda Kodiaq Sportline, RS and VRS models from 2017 to 2022.

Product Specifications

• Material: ABS
• Package Quantity: 1 piece
• Condition: 100% New

What It Is / How It Works

This air conditioning outlet vent tab clip is a small plastic fastener for car interiors. It fits Skoda Kodiaq Sportline, RS and VRS models from 2017 to 2022.

Who It's For / Use Cases

Replacement tab clips like this suit car owners who need to replace a missing or worn clip on an air conditioning outlet vent. They are also a practical choice for anyone repairing several outlets in the same vehicle, since the pack is sold per piece and buyers can order as many as they need.

How to Use / Care

1. Use it to secure an air conditioning outlet tab on a Skoda Kodiaq, RS or VRS model within the 2017 to 2022 range.

How to Choose

Start with the vehicle. Match your Skoda model and year to the range given in Specifications, and compare the model numbers there with the clip you need to replace.

Frequently Asked Questions

Which vehicles does it fit?
It fits Skoda Kodiaq Sportline, RS and VRS models from 2017 to 2022.

What material is it made of?
It is made of ABS.

How many pieces come in a pack?
One piece per pack.

Does it come with installation instructions?
No. There are no instructions included in this kit.

Key Features

• Wind Direction Control — It is a wind direction adjustment knob for car air conditioning outlets, used to change where the airflow points.
• Connector Is Designed — The connector is designed to match, so it can be fitted without cutting or splicing any wiring.
• Lexus ES Fitment — It is made for Lexus ES Series 2006-2012 vehicles.

Product Specifications

• Package Size: 1 piece per pack
• Vehicle fit: Lexus ES Series 2006-2012

What It Is / How It Works

This wind direction adjustment plectrum is a small knob-type vent part for car air conditioning outlets. It fits the toggle position of the outlet so the louvre direction can be adjusted by hand.

Who It's For / Use Cases

Car owners who have a loose, worn or broken air vent toggle on a Lexus ES Series from 2006 to 2012 may look for a replacement wind direction piece. Auto repair shops and parts buyers who handle interior air outlet repairs often stock small toggle parts of this kind for quick swaps.

How to Use / Care

1. If you are not sure how to install it, ask the seller for installation instructions.
2. Or take it to your local auto repair shop and have them install it.

How to Choose

Start with the vehicle. Match the car to the Lexus ES Series 2006-2012 range before buying, since the piece is made for that vehicle group. Confirm the model year, because a vent toggle that matches one generation may not sit correctly in another. Choose a single-piece pack if you only need one replacement toggle.

Frequently Asked Questions

Which vehicles is it made for?
It is made for Lexus ES Series 2006-2012 vehicles, so match your car to that range before ordering.

How many pieces come in the package?
The package contains one wind direction plectrum.

Does it need cutting or splicing to fit?
No. The connector is described as a correct match, and fitting it requires no cutting or splicing.

What if I do not know how to install it?
The seller can supply installation instructions on request, or a local auto repair shop can fit it for you.