Key Features

• Leather Material — It is made of leather and is designed as a replacement cover for the center console lid.
• Model Year Range — It is made for Honda Accord models from 2008 through 2012.

Product Specifications

• Material: Leather
• Year: 2008 2009 2010 2011 2012

What It Is / How It Works

This car armrest center console lid is a leather replacement cover for a Honda Accord. A center console lid is the hinged top of the armrest storage box between the front seats, and this cover is made to replace that lid.

Who It's For / Use Cases

Owners of a 2008 to 2012 Honda Accord who need a replacement center console lid cover are the main buyers for this type of part. Drivers who want a leather replacement for a worn console lid are another group it may suit.

How to Use / Care

1. Use it as a replacement cover for the center console lid of a Honda Accord from the 2008 to 2012 model years.
2. Check that the model and year range match your car before you start.

How to Choose

Start with the model year range. Choose a cover made for Honda Accord models from 2008 through 2012 so it matches the car you own. Next, look at the material: this one is leather, so compare that with the interior look you want. Finally, compare the lid shape with the console you are replacing so the new cover matches that console.

Frequently Asked Questions

Which cars is this cover for?
It is made for Honda Accord models from 2008 through 2012, so check that your car falls in that range before you buy.

What material is the cover made of?
The cover is made of leather and is sold as a replacement cover for the center console lid.

What is a center console lid?
It is the hinged top of the armrest storage box between the front seats. Some owners replace only the lid when its cover wears out, rather than the whole console.

Key Features

• Plastic Construction — The catch is made of plastic.
• Direct Replacement Design — It is a direct replacement, designed for proper fit and function.
• Pajero Model Fit — It fits the Mitsubishi Pajero 2001-2018 in models NM, NS, NT, NW and NX.

Product Specifications

• Material: Plastic
• Color: Black
• Placement on Vehicle: Center, Upper
• Compatible models: Mitsubishi Pajero 2001-2018: NM, NS, NT, NW, NX
• Package Quantity: 1 console catch latch
• Part number: MR532555

What It Is / How It Works

This armrest box latch clip is a replacement console catch for a Mitsubishi Pajero center console lid. The pack holds one console catch latch, made of plastic in black.

Who It's For / Use Cases

Replacement console catches suit vehicle owners who need a spare catch for an armrest box or center console lid. They suit people who have a worn or missing latch and want a plastic part matched to the model years in Product Specifications. Check the Compatible models row before ordering so the model years and codes match the vehicle.

How to Use / Care

1. Use it as a replacement catch for the armrest box lid on the vehicle models listed under Compatible models in Product Specifications.
2. Before fitting, confirm the vehicle position matches the center and upper placement.

How to Choose

Start with the vehicle. Match your Mitsubishi Pajero model years and model codes to the Compatible models row, since the fit depends on those details. Next, check that the part sits in the center and upper location you need. The finish is black plastic.

Frequently Asked Questions

Which vehicles does it fit?
It fits the Mitsubishi Pajero for 2001-2018 model years, in models NM, NS, NT, NW and NX. The full model list is in Product Specifications under Compatible models.

What is it made of?
It is made of plastic and is black.

Where is it placed on the vehicle?
It is for the center and upper placement on the vehicle.

How many come in a pack?
The pack has one console catch latch, part number MR532555.

Is it a direct replacement?
It is a direct replacement, designed for proper fit and function on the models listed in Product Specifications.

Key Features

• Mazda CX-5 Fit — It fits the Mazda CX-5 KE for 2013-2016.
• Model Years — It covers the 2013 2014 2015 2016 model years.
• OEM Part Number — It carries OEM number KA0G-64-45YA-02.

Product Specifications

• Material: Plastic
• Compatible models: Mazda CX-5 KE 2013-2016
• Year: 2013 2014 2015 2016
• Part number: KA0G-64-45YA-02

What It Is / How It Works

This car center console armrest lid latch clip is an interior replacement part. It fits the Mazda CX-5 KE for 2013-2016 and is made of plastic.

Who It's For / Use Cases

Owners of a Mazda CX-5 KE from 2013 to 2016 who need a replacement clip for the center console armrest lid will find this part matches that vehicle. Anyone repairing a loose or broken armrest lid latch on that model range is the buyer this part suits. Check the model and year against your vehicle before ordering.

How to Use / Care

1. Use it to replace the center console armrest lid latch on a Mazda CX-5 KE from 2013-2016.

How to Choose

Start with the vehicle. This part is made for the Mazda CX-5 KE, 2013-2016, so confirm your car matches that model and year range before buying. Next, compare the OEM number KA0G-64-45YA-02 with the part you are replacing. Plastic is the material, so the fit and part number are the deciding points.

Frequently Asked Questions

Which vehicle does it fit?
It fits the Mazda CX-5 KE for 2013-2016.

What is it made of?
It is made of plastic.

What is the OEM number?
The OEM number is KA0G-64-45YA-02. It is the number to match when you compare the part you are replacing.

Is it a center console armrest part?
It is a center console armrest lid latch clip, sold as an interior replacement part for the Mazda CX-5 KE.

Key Features

• Soft Padded Feel — The soft material adds padding under your arm while you drive.
• Waterproof Faux Leather Surface — The faux leather surface has a waterproof feature and is chemical resistant.
• Decorative Interior Look — It is designed to decorate the car's appearance and give the cabin a more distinctive style.
• Protects Original Cover — It protects the original cover of the car armrest.
• Elastic Band Hold — A highly elastic band holds the pad in place on the armrest.

Product Specifications

• Material: Faux Leather
• Color: Black, beige, red, Brown
• Size: 29.5 × 15 × 10.8 cm (11.6 × 5.9 × 4.25 in)
• Pack: 1 piece

What It Is / How It Works

This car armrest pad is a faux leather cover made to fit over a center console armrest and protect its original cover.

Car armrest covers are a common interior accessory for drivers who want a protective layer on the console and a refreshed cabin look.

Who It's For / Use Cases

Car armrest pads suit owners who want a protective layer over a console armrest and a more distinctive cabin look. They fit drivers who prefer a faux leather surface over bare plastic or worn fabric on the center console.

How to Use / Care

1. Use it to protect the original cover of the car armrest.

How to Choose

Start by measuring your center console armrest and comparing it with the overall size in Product Specifications. Car armrest pads come in different widths and depths, so the size row helps you judge fit.

Choose a color that matches your interior. The range covers black, beige, red and brown.

Frequently Asked Questions

What is the cover made of?
It has a faux leather surface with a PU finish, and that surface is waterproof and chemical resistant.

Which colors are available?
It comes in black, beige, red and brown.

What size is it?
It measures 29.5 × 15 × 10.8 cm (11.6 × 5.9 × 4.25 in), so check the size row in Product Specifications against your console before ordering.

Will it stay in place on the armrest?
The pad has a highly elastic band that holds it on the armrest, and it is designed to protect the original armrest cover.

How many pieces come in a pack?
Each pack contains one car armrest pad.

Key Features

• Vehicle-Specific Fit — One pre-cut piece made for the BYD Seal 2023-2025, matched to the original interior radian and panel contour.
• Transparent TPU Membrane — Made from a high-density dual-coat transparent TPU membrane with ultra HD light transmittance.
• Full Interior Coverage — Covers the instrument cluster, central control screen, gear shift panel and window lift switches.
• Heat Self-Repair Coating — A built-in thermal coating repairs minor daily swirls and scratches with heat, restoring a smooth surface.
• Wet Paste Installation — Supports wet paste installation with no professional tools or skills required.

Product Specifications

• Material: TPU
• Color: Transparent

What It Is / How It Works

This TPU interior screen protector is a transparent film sized for the center console of a BYD Seal 2023-2025. It is a screen protector film for car interior surfaces, cut to sit over the console area.

Who It's For / Use Cases

Interior film protectors suit car owners who want to limit daily wear on the center console, such as handling marks and dust build-up on frequently touched areas. They suit owners who prefer a clear film that leaves the original trim visible.

How to Use / Install / Care

1. Place the pre-cut film on the center console, matching it to the original interior contour. No on-car cutting or extra trimming is needed.
2. Apply the film using the wet paste installation method, which requires no professional tools.
3. When you want to remove it, the film comes off without residual glue and leaves the car surface intact.

How to Choose

Check the Compatible models row in Product Specifications so the model year matches your car before ordering. Interior film protectors are most useful when the cut matches the console shape, so fit is the main selection point.

Frequently Asked Questions

What car is this film made for?
It is cut for the BYD Seal 2023-2025 and sits on the center console, as a pre-cut piece for that model.

What material is it made from?
It is made from TPU, a transparent dual-coat membrane with ultra HD light transmittance that keeps the original interior texture visible.

Does the film repair scratches?
The film has a built-in thermal self-repair coating. Minor daily swirls and scratches can be repaired with heat, restoring a smooth surface.

Which interior areas does it cover?
It covers the instrument cluster, central control screen, gear shift panel and window lift switches, and it blocks daily scratches, fingerprint marks, dust, oil stains, perfume corrosion and high temperature damage.

Which models or devices is this designed for?
This product is designed for specific models listed under Product Specifications → Compatible models. Confirm your exact model appears there before buying.

Key Features

• Leather Construction — The cushion is made of leather, so the surface your arm rests on is leather.

Product Specifications

• Material: Leather

What It Is / How It Works

This center console armrest cover is a cushion that sits on top of a car's center console armrest. Armrest cushions of this type add a padded surface where the elbow rests while driving.

Who It's For / Use Cases

Armrest cushions suit drivers and passengers who rest an arm on the center console for long stretches and want a softer place to rest it. They also suit owners who want a leather-look surface on a console they already use every day.

How to Use / Care

1. Place the cover over the armrest of the center console.
2. Check that it sits flat before resting an arm on it.

How to Choose

Start by measuring the length and width of your center console armrest. Compare those measurements with the cover's listed dimensions before buying, so the cover sits flat without hanging over the edges. Choose leather if you want a smooth surface to rest your arm on. Think about how often you rest your arm on the console, since daily use is the case where a padded cover is most useful.

Frequently Asked Questions

What is the cover made of?
It is made of leather, the material listed for this cushion.

What is this cushion for?
It is for resting your arm on a car's center console armrest, giving the elbow a padded surface.

Is it a seat cover?
No. It covers the armrest of the center console, not a seat.

How do I know if it will fit my console?
Measure your armrest and compare those measurements with the cover's listed dimensions before ordering.

Key Features

• ABS Construction — It is made of ABS, a plastic material.
• 3M Adhesive Backing — The back comes with 3M glue, so the trim is attached by pasting it in place.
• Enhanced Gloss Look — It increases the gloss of the original car.
• Decorative Surface Protection — It serves as a decorative protective layer for the car's surface.

Product Specifications

• Material: ABS
• Color: Black, Red
• Applicable models: Toyota 26 RAV4; Toyota RAV4 XA60 2026–2028
• Applicable year: 2025/12 and later
• Product Specifications: 1 piece
• Installation method: Paste with 3M adhesive backing. Below 15 degrees, heat before pasting.

What It Is / How It Works

This armrest box trim is a decorative car interior trim strip for the armrest box area. It is made of ABS and comes in black or red.

Who It's For / Use Cases

Car owners who want to refresh the look of the armrest box area can use trim pieces like this one. Trim strips of this kind suit drivers who want a glossier, more finished look on one part of the cabin without a full interior refit. They also suit people who prefer a simple surface piece that is attached by pasting.

How to Use / Care

1. Fit the armrest box trim to the armrest box area of the car.
2. Paste the trim only when the temperature is at least 15 degrees; if it is colder, heat the area and the trim before pasting.

How to Choose

Begin by matching the model and year to your vehicle: this trim suits the Toyota RAV4 from 2025/12 onward. Pick black or red to match the colour scheme of your car interior, since both colours are available. Check the model and year before you order so the trim fits the vehicle you own.

Frequently Asked Questions

What is the trim made of?
It is made of ABS plastic and is intended as a decorative protective layer for the car's surface.

Which vehicle is it for?
It is for the Toyota RAV4 from 2025/12 onward.

How is it attached?
The back has 3M adhesive, so it is attached by pasting. Below 15 degrees, heat it before pasting.

Does it change the look of the car?
It is designed to increase the gloss of the original car.

How many pieces come in a pack?
One piece per pack.

Key Features

• Armrest Protection — It is made to protect the center armrest box.

Product Specifications

• Product: Central armrest box cover
• Material: TPE material
• Compatible models: Tesla New Model 3 Highland 2024~2026; Tesla New Model Y Launch/Juniper 2025 2026; Tesla Model Y Juniper 2025 2024

What It Is / How It Works

This soft center console armrest cover is a TPE cover for the center armrest box of the Tesla Model Y and Model 3 versions named in Product Specifications. Armrest covers of this kind sit over the armrest lid to add a protective layer.

Who It's For / Use Cases

Owners of newer electric cars with a center console armrest may want a protective cover for that armrest box. Armrest covers of this kind suit drivers who want a cover matched to their exact model year rather than a generic one.

How to Use / Care

1. After long-distance transportation, install the cover in the car.
2. Before use, wipe the cover clean with a damp towel.

How to Choose

Choose by model year first. It is not suitable for the old Model Y. It is for the new Model Y Launch/Juniper 2025 2026, which requires the latest version with the LAUNCH logo, and for the Model 3 Highland 2024~2026. Match your car against the Compatible models row in Product Specifications before you buy.

Frequently Asked Questions

Which Tesla models is it made for?
It is made for the new Model Y Launch/Juniper 2025 2026 and the Model 3 Highland 2024~2026.

Does it fit the old Model Y?
It is not suitable for the old Model Y. The Model Y it fits is the new version, which requires the latest version with the LAUNCH logo.

What material is it made of?
It is made of TPE material and is a soft center console armrest cover.

What does it do?
It is made to protect the center armrest box.

How should I clean it before use?
After long-distance transportation, wipe the cover clean with a damp towel before use.

Key Features

• Plug-In Connector — The connector is meant to fit the stated BMW 3 Series models without cutting or splicing any wiring.
• Quality-Controlled Build — The parts are made under strict quality control standards and tested during production.

Product Specifications

• Intended use: For BMW 3 Series E90 E92 E93 2005-2012
• Package contents: 1 AC air vent grille
• Part number: 64229130458

What It Is / How It Works

Air conditioning vent grille tab clip repair kits are small replacement parts for the dashboard air outlets in a car. They are used when a grille tab or outlet clip has worn out or broken.

Who It's For / Use Cases

Independent repair shops and parts buyers who stock clips for this model range also order these kits for their customers.

How to Use / Care

1. If you are not sure how to fit it, ask the seller for installation instructions, or take it to a local auto repair shop for fitting.

How to Choose

Start by matching the kit to your car. The stated fit is the BMW 3 Series E90, E92 and E93 from 2005 to 2012, so confirm your model and year before you pay. Check that the kit includes the air vent grille piece you need for the outlet you are repairing.

Frequently Asked Questions

Which BMW models does this kit fit?
The stated fit is the BMW 3 Series E90, E92 and E93 from 2005 to 2012. Confirm your car's model before ordering.

What comes in the package?
The package contains 1 AC air vent grille.

Does installation require cutting or splicing?
No cutting or splicing is needed, because the connector is designed for a direct fit.

What if I do not know how to install it?
The seller can provide installation instructions, or a local auto repair shop can fit the part for you.

Key Features

• Upgraded Design — It has an upgraded design for the vent blade slider.
• Solid Build — It is built with a solid body that holds its shape in the air outlet.
• Break Resistance — It is not easy to break during fitting and everyday use.
• PC and ABS Build — It is made of PC and ABS with a rubberized coating, not original soft plastic material.

Product Specifications

• Color: Original Black
• Material: PC and ABS with rubberized coating
• Compatible models: Mercedes-Benz W166, W292; Mercedes Benz W166 W292 M ML350 GL450 GLE GLS
• Year: 2012-2019
• Steering wheel: Left steering wheel (LHD) and right steering wheel (RHD) cars

What It Is / How It Works

This is a replacement blade for a dashboard AC air outlet vent, sold as a repair kit for Mercedes-Benz W166 and W292 cars. Vent blades are the small slats inside an air outlet that direct airflow, so a single broken or loose blade can be replaced without changing the whole vent.

Who It's For / Use Cases

Vent blade repair parts suit owners of Mercedes-Benz W166 and W292 cars who need to replace a worn, loose or broken slat in a dashboard air outlet. Owners of left- and right-hand drive cars both fall within the vehicle range this part is sold for.

How to Use / Care

1. Use it to repair a broken or loose dashboard AC air outlet vent blade.

How to Choose

Start with the vehicle. The Compatible models and Year rows in Product Specifications show the W166 and W292 range from 2012 to 2019, so match your car to those before choosing.

Frequently Asked Questions

Which vehicles does it fit?
It fits the BENZ W166 and W292, with a year range of 2012-2019. The Compatible models and Year rows in Product Specifications give the details.

What is it made of?
It is made of PC and ABS with a rubberized coating. It is not original soft plastic material.

Can it be used in left-hand and right-hand drive cars?
Yes, it can be used in both left steering wheel (LHD) and right steering wheel (RHD) cars.

Is it the same as the original part?
It is not original soft plastic material, so its parts may differ from the original parts in appearance and material.

Should it be installed by a professional?
Professional installation is recommended for this repair.

Key Features

• Black Matte Chrome Finish — Comes in a Black and Matte Chrome color.
• Made ABS Plastic — Made from ABS plastic with a rubber oil painting finish.
• Audi Q7 Application — Designed for Audi Q7 vehicles from 2016 to 2019.
• LHD and RHD Use — Both left-hand drive and right-hand drive vehicles can use these parts.
• Four Pieces Per Car — One car needs four pieces for the front AC vent, and all four are the same.

Product Specifications

• Color: Black and Matte Chrome
• Material: ABS with rubber oil painting
• Year: 2016-2019
• Fitment: LHD/RHD
• Place on Vehicle: Front Dashboard
• Is it Powered: Non-powered
• OEM NO.: 4M1820901Q, 4M1820901N, 4M1820901R, 4M1820901P, 4M1820901S, 4M1820901A, 4M1820901B, 4M1820902F, 4M1820902M, 4M1820902G, 4M1820902N, 4M1820902H, 4M1820902P, 4M1820902J, 4M1820902Q, 4M1820902K, 4M1820902R, 4M1820902L

What It Is / How It Works

This Audi Q7 air vent grille AC tab clip slider repair kit is a set of replacement front dashboard air vent parts for 2016-2019 Audi Q7 vehicles. The parts are made from ABS with a rubber oil painting finish in a Black and Matte Chrome color. Air vent grille tabs and slider clips are small plastic parts that hold vent louvers in place, so replacement pieces are a common choice when an original tab or clip breaks.

Who It's For / Use Cases

Drivers who want matching black-and-chrome vent parts for an interior refresh may also find this category useful, and shops that handle interior vent repairs often stock these small clip and tab parts in sets.

How to Use / Care

1. LHD and RHD both can be used.
2. Easy to use and to operate at affordable prices.
3. If you cannot replace the parts well by yourself, you can re-adjust it or go to your local professional maintenance store to install it.

How to Choose

Start with the vehicle. Confirm your car is an Audi Q7 from the 2016-2019 range and check the OEM number list in Product Specifications against the original part number on your vent. Plan on four pieces for each car's front AC vent, because all four are the same. Finally, match the Black and Matte Chrome color to the surrounding interior trim so the repaired vent blends in.

Frequently Asked Questions

Which vehicles is this repair kit made for?
It is made for Audi Q7 vehicles from 2016 to 2019, and the Model Name is Q7. Check that your car falls in that range and compare the OEM number list in Product Specifications with your original part.

How many pieces do I need?
One car needs four pieces for the front AC vent, and all four pieces are the same, so one set covers one vent position on a single car.

Can it be used on left-hand and right-hand drive cars?
Yes. The source states that both LHD and RHD vehicles can use it, with the fitment recorded as LHD/RHD.

What is the material and finish?
The parts are made from ABS with a rubber oil painting finish in a Black and Matte Chrome color.

What if I cannot install the parts myself?
You can re-adjust the parts or take them to a local professional maintenance store to have them installed.

Key Features

• Adjustable Airflow Direction — The clip lets you adjust the wind direction so the air does not blow straight onto your face.
• ABS and PC Build — The clip is crafted from ABS +PC material.
• Elantra Fit — It is designed to match Hyundai Elantra models from 2012 to 2016 for a snug, secure fit.
• No-Cut Installation — Installation requires no cutting or splicing.

Product Specifications

• Color: Black
• Piece Count: 4 pcs
• Material: ABS +PC
• Size: 4.3 × 4 cm (1.7 × 1.57 in)
• Part number: 97480-4V000

What It Is / How It Works

These are AC vent clips, sold as a set of four black air outlet vent grille adjustment slide clips. The clips are made of ABS +PC and slide to change the direction of the air coming out of the vent.

Who It's For / Use Cases

Vent clips of this type suit drivers who want more control over where the air from the dashboard vents lands, rather than having it blow straight at them. They suit anyone who wants to change the direction of cabin airflow without replacing the vent itself.

How to Use / Care

1. Use the clip to adjust the air outlet vent grille so the wind direction suits you.

How to Choose

Compare the listed size with the vent grille you plan to adjust before you buy. The size is 4.3 × 4 cm (1.7 × 1.57 in), and the set contains four pieces. It is designed to match Hyundai Elantra models from 2012 to 2016.

Frequently Asked Questions

Does installation require cutting?
No. Installation requires no cutting or splicing.

Is the clip powered?
It is non-powered. It is a mechanical clip set made to slide and hold the vent grille adjustment.

How many pieces are in the pack?
The pack has four pieces, sold as one set of A/C vent clips.

What is the clip made of?
It is made of ABS +PC and comes in black.

Key Features

• Air Vent Replacement — It replaces the original roof air vent on the Mercedes-Benz V-Class.
• LED Ceiling Lighting — The LED lights wire from the cigarette lighter to the ceiling vent position and glow in Ice Blue, Yellow, or White.
• Negative Wire Plug — In the matching plug, the blue wire is the negative pole.
• Four-Piece Set — It is sold as a set of four roof turbo air outlets.
• Screw-Type Fitting — It is screwed in place rather than fixed with adhesive, so the original roof air vent is removed first.

Product Specifications

• Compatible models: Mercedes-Benz V-Class V250, V220d (2014-2023); Mercedes Benz V Class EQV Vito Viano Valente Metris W447 V250
• Model: V class EQV VITO W447
• Color: Ice Blue, Yellow, White (LED)
• Package Contents: 4 pieces for roof air vent replacement
• Packaging: Poly bag with box

What It Is / How It Works

This interior roof LED turbo vent AC outlet trim is a replacement roof air vent for the Mercedes-Benz V-Class. It has LED lighting and a turbo air outlet design, and it is sold as a four-piece set.

Who It's For / Use Cases

Roof air outlet trims suit owners of Mercedes-Benz V-Class vans who want to replace a roof air vent and add a lit outlet trim. Anyone who is not comfortable removing a screw-fixed vent may prefer to have a trained installer fit it.

How to Use / Care

1. Remove the original roof air vent first, since this is a screw-type part.
2. Place the new air vent in the desired area of the roof.
3. Connect the LED wires to the cigarette lighter using the matching plug, with the blue wire as the negative pole.
4. Connect the positive pole to the white wire for ice blue light, or to both the white and yellow wires for white light.

How to Choose

Choose the light colour that suits your cabin: Ice Blue, Yellow, or White, depending on how the positive pole is connected. Confirm the listed Mercedes-Benz V-Class model matches your van before ordering, and confirm that you can fit a screw-type part before you buy.

Frequently Asked Questions

What colours do the LEDs show?
The LEDs come in Ice Blue, Yellow, and White. Ice blue shows when the positive pole is connected to a white wire, and white shows when it is connected to the white and yellow wires.

How is the light wired?
The LED lights wire from the cigarette lighter to the ceiling vent position. In the matching plug, the blue wire is the negative pole.

What does the package include?
It includes four pieces for the roof air vent replacement, packed in a poly bag with a box.

Does it use adhesive or screws?
It is a screw-type product with no sticker, so the original roof air vent must be removed first.

Key Features

• Mercedes E-Class Fit — It fits the Mercedes-Benz Clase E 2010-2015.
• Mercedes GLK Fit — It fits the Mercedes-Benz Clase GLK 2008-2014.
• Mercedes GLA Fit — It fits the Mercedes-Benz GLA Clase 2015-2016.

Product Specifications

• Sticker Placement: Navigation
• Compatible models: Mercedes Benz A/B/C W204/E W212/GLA/CLA/GLK/GLE

What It Is / How It Works

This is a decorative sticker for the window lifting button on Mercedes-Benz vehicles. It is meant to dress up the switch area of the door, and the fitment details are in the Vehicle fitment row of Product Specifications.

Who It's For / Use Cases

Decorative window lifting button stickers suit Mercedes-Benz owners who want to refresh the look of the window switch area without replacing the switch itself. They also suit people who maintain a set of vehicles and want a simple cosmetic update for a matching model and year range.

How to Use / Care

1. Use it to dress up the window lifting button on a listed Mercedes-Benz model.

How to Choose

Start with the vehicle. Check your model and model year against the Vehicle fitment row in Product Specifications before you order. Choose the sticker for the switch you are decorating, since the fitment row lists the models it is meant for. Matching the model and years keeps the cover aligned with the factory switch area.

Frequently Asked Questions

Which Mercedes-Benz models does it fit?
It fits the models and years in the Vehicle fitment row, including the Clase E 2010-2015, Clase GLK 2008-2014, Clase ML 2012-2014 and GLA Clase 2015-2016.

Does it fit a Clase E from 2010 to 2015?
It fits the Mercedes-Benz Clase E 2010-2015.

Does it fit a G-Class?
It fits the Mercedes-Benz G Clase G500 2013.

Does it fit a GL-Class?
It fits the Mercedes-Benz GL Clase 2013-2014.

Is it a sticker or a working switch?
Decorative lifting button stickers are adhesive covers that sit over the switch area. They change how the switch area looks but do not replace the switch.

Key Features

• Model Y Juniper Fit — It fits the Tesla Model Y Juniper 2025.
• Model Y Launch Fit — It fits the Tesla Model Y Launch 2025.
• Refreshed Edition Fit — It fits the Model Y Refreshed Edition / Project Juniper.
• Front and Rear Sills — It is designed for the front and rear door sills.

Product Specifications

• Material: TPE
• Compatible models: Tesla Model Y Juniper 2025; Tesla Model Y Launch 2025; Model Y Refreshed Edition / Project Juniper
• Years: After 2025

What It Is / How It Works

This pillar threshold strip is a door-sill protector for the Tesla Model Y. It is made of TPE and is designed for the Model Y Juniper 2025 and Launch 2025 editions.

Door-sill protectors are interior trim strips that sit along the threshold of a car door, where shoes and bags brush the edge when people get in and out.

Who It's For / Use Cases

Door-sill protectors suit Tesla Model Y owners who want a trim strip along the door opening, especially those who load and unload the car often and want the sill edge covered inside the cabin.

How to Use / Care

1. Place the strip on the door threshold of the Tesla Model Y as an anti-kick pad.
2. Line the strip up with the sill edge before closing the door.
3. Keep the strip in place on the threshold while the car is in use.

How to Choose

Start with your Model Y edition. Compare it with the Compatible models row in Product Specifications, since the Juniper 2025, Launch 2025 and Refreshed Edition / Project Juniper are named separately. The name covers both front and rear sills, so choose by the door you plan to protect.

Frequently Asked Questions

What is it made of?
It is made of TPE.

Which Tesla Model Y editions does it fit?
It fits the Tesla Model Y Juniper 2025, the Tesla Model Y Launch 2025, and the Model Y Refreshed Edition / Project Juniper.

Can it be used on both front and rear doors?
It is designed for the front and rear door sills, so the same strip type covers either door.

What model year range is it for?
The model year marked for it is After 2025, so check that your car falls in that range.

Who makes it?
It is made by YouGallop.

Key Features

• Interior Area Coverage — Car interior film stickers are designed to be applied to specific interior areas, such as screens, control panels and window sections, to add a protective layer over the surface.

Product Specifications

• Sticker Placement: Internal

What It Is / How It Works

This car interior film sticker is a thin protective film for vehicle cabins.

Who It's For / Use Cases

Car owners who want a protective film for one specific area of the cabin suit this type of sticker. It also suits drivers who prefer to measure the area first and pick a film sized to match before buying.

How to Use / Care

1. Use it to protect the car's interior screen and window-lift control areas.

How to Choose

Start with the area you want to cover, such as a screen, control panel or window-lift section, and choose a film sized for that spot. Confirm the Sticker Placement row in Product Specifications says Internal before ordering, so it matches the inside surface you plan to cover.

Frequently Asked Questions

Where is this sticker placed?
It is for internal placement, meaning it goes on the inside surface of the car.

What is it used for?
Car interior film stickers are used to add a protective layer to screens, control panels and window areas inside the vehicle.

How do I pick the right size?
Measure the area you want covered first, then choose a film cut for that spot so the surface is fully covered.

Key Features

• Leather Material — It is made of leather, so the surface has a natural leather finish.

Product Specifications

• Material: Leather

What It Is / How It Works

This gear shift sleeve is a car interior accessory made of leather. Gear shift sleeves are a category of trim covers that dress up the area around a vehicle's shifter.

Who It's For / Use Cases

Gear shift sleeves suit drivers who want a covered, finished look around the shifter in their car's interior. They are often chosen by owners refreshing the interior trim of an existing vehicle.

How to Use / Care

1. Use it as a gear shift sleeve in the car's interior, placed over the shifter area it is meant to cover.

How to Choose

Choose by fit to your vehicle's shifter and centre console layout before buying, since gear shift sleeves are sized around the lever and surrounding trim. If you prefer a leather surface for the interior, the material is the main factor to compare.

Frequently Asked Questions

What is the sleeve made of?
It is made of leather.

What kind of item is this?
It is a gear shift sleeve for the car interior, made of leather.

How do I check the size before ordering?
Dimensions are not stated on this product, so compare the shifter and console area of your car with the sleeve's shape before ordering.

Key Features

• Vehicle Fit — It is made for the Honda Accord MK 7 from 2003 to 2007.
• Black Color — It is finished in black.
• OEM Part Numbers — It matches OEM part numbers 83419-SDA-A01 and 83418-SDA-A01.

Product Specifications

• Vehicle fit: Honda Accord MK 7 2003-2007
• Color: Black
• Material: Plastic
• Net Weight: 27 g (0.95 oz)
• Part numbers: 83419-SDA-A01, 83418-SDA-A01
• Compatible models: Honda Accord MK 7 Central

What It Is / How It Works

This center console armrest box is a black plastic unit for the Honda Accord MK 7 from 2003 to 2007. It is sold under OEM part numbers 83419-SDA-A01 and 83418-SDA-A01.

Who It's For / Use Cases

Center console armrest boxes suit car owners who need to replace a worn console lid, lock or latch. They fit owners who want the console part to match the original design of the vehicle.

How to Use / Care

1. Use it as a center console armrest for the front seats of the vehicle.

How to Choose

Start with the Vehicle fit row in Product Specifications and confirm the model and years match your car. Look at the color and material rows to see whether the black plastic finish suits your console.

Frequently Asked Questions

What vehicle is it for?
It is made for the Honda Accord MK 7 from 2003 to 2007. The Vehicle fit row in Product Specifications gives the same years.

What material is it made of?
The body is made of plastic and is finished in black.

How heavy is it?
It weighs 27 g (0.95 oz).

Does the price include customs fees?
No. The price does not include local customs fees or taxes, so buyers pay any applicable import taxes.

Which part numbers does it carry?
It carries OEM part numbers 83419-SDA-A01 and 83418-SDA-A01, which are also shown in the Part number row of Product Specifications.

Key Features

• Cup Holder Cover — The package includes one cup holder cover.
• Replacement Part — It is designed as a replacement for the original armrest box cover.
• No Cutting Needed — It is designed to fit without cutting or splicing.

Product Specifications

• Material: ABS+TPU
• Year: 2014-2022
• Package contents: 1 cup holder cover
• Part number: 96782515ZD

What It Is / How It Works

Armrest box covers are replacement console parts that sit over the centre armrest storage box and cup holder area of a car. This armrest box cover is sold as a replacement lid for that console space.

Who It's For / Use Cases

Armrest box covers suit car owners who need a replacement console lid for the centre armrest storage box and cup holder. Buyers who are matching an original part usually look at the OEM number and the vehicle year range before ordering, so those details matter most for this type of cover.

How to Use / Care

1. Use it to cover the centre armrest storage box and cup holder in the vehicle.

How to Choose

Start with the vehicle make, model and year range, since armrest box covers are shaped for a specific console. Match the OEM number 96782515ZD to the original part number on your car. The cover is made from ABS+TPU, so its material is one more point to compare when choosing a replacement for the console area.

Frequently Asked Questions

Which vehicles is it made for?
It is made for the Peugeot 301 2017-2018, Peugeot 2008 2014-2018, Citroen Elysee 2017-2018 and Citroen C3XR 2015-2021.

What material is the cover made from?
The cover is made from ABS+TPU.

What comes in the package?
The package contains one cup holder cover.

Does it need cutting or splicing?
No. It is designed to fit without cutting or splicing.

What is the OEM number?
The OEM number is 96782515ZD.

Key Features

• Armrest Lid Latch Repair — It serves as a repair clip for the lock cap of the center console armrest storage box.
• Audi A4 B6 B7 Fit — It fits the Audi A4 B6 B7 for model years 2002–2007.

Product Specifications

• Material: ABS
• Color: Black, Gray, Beige
• Car Maker: Audi A4 B6 B7 (2002–2007)
• Size: 70 × 19 × 22 mm (2.76 × 0.75 × 0.87 in)
• Package Quantity: 1 piece

What It Is / How It Works

This car armrest lid console cover latch clip is a small ABS plastic clip for the center console armrest lid. It fits the Audi A4 B6 B7 (2002–2007) and comes as one piece.

Who It's For / Use Cases

Latch clips like this suit drivers who notice a center console armrest lid that sits loosely or no longer latches fully. Owners often choose a small part like this to repair a loose lid catch rather than replace the whole console. Anyone working on the lid catch area of a car in the matching generation will find this type of clip useful.

How to Use / Care

1. Use it to repair the latch area of a center console armrest lid.

How to Choose

Match the vehicle make, model and year range to your own car before buying. Pick the colour closest to your console trim so the clip blends with the lid. Confirm that the clip shape matches the lid latch you are repairing.

Frequently Asked Questions

Which vehicles does it fit?
It fits the Audi A4 B6 B7 for model years 2002–2007.

What material is it made of?
It is made of ABS plastic.

What colours does it come in?
It comes in Black, Gray and Beige.

How many pieces are in a pack?
One piece per pack.

Is it certified?
It carries CCC certification.

Key Features

• Aluminium Alloy Body — The paddles are made of aluminium alloy with a dull polish finish.
• Sandblasted Anodized Surface — The aluminum alloy surface is sandblasted and given anodic oxidation.
• Etched Plus Minus Marks — The +/- symbols are etched out of the top of each blade.
• Direct Replacement Fit — They are made to fit the original shifter paddle.
• Double-Sided Tape Mounting — Each paddle attaches with double-sided tape.

Product Specifications

• Material: Aluminium alloy
• Surface finish: Dull polish
• Color: Black, silver, blue, red
• Placement on Vehicle: Front, left, right
• Fitment Type: Direct replacement
• Size: 15.3 × 5.7 cm (6 × 2.24 in)
• Pack: 1 pair (left and right)
• Exclusion: Does not fit all AMG models
• Compatible models: Mercedes-Benz A-Class (W176), B-Class (W246), C-Class (W205), E-Class (W212), CLA (W117), CLS, GLA (X156), GLC (W/X253), GLE (W166/W292), S-Class (W222); Mercedes Benz A B M Class W176 W246 GLK SLK CLA GLA

What It Is / How It Works

These are steering wheel shift paddles, metal extenders for the DSG + / - paddle function on Mercedes-Benz steering wheels. The aluminum alloy paddles come as one left and one right piece, sized 15.3 × 5.7 cm (6 × 2.24 in).

Who It's For / Use Cases

Shift paddle extenders suit drivers of Mercedes-Benz models with steering wheel DSG + / - function who want a metal replacement paddle in a color that suits their interior. They suit owners who want a direct replacement for the original shifter paddle.

How to Use / Care

1. Use the paddles only on a vehicle with steering wheel DSG + / - function.
2. Find the +/- symbols etched on the top of each blade to tell the plus side from the minus side.
3. Attach each paddle with double-sided tape.

How to Choose

Start with the vehicle. Check that your Mercedes-Benz model appears in the Compatible models row in the specifications, and that your steering wheel has DSG + / - function. The paddles do not fit all AMG models. Choose the color that suits your interior trim: black, silver, blue or red. The pack is one left and one right paddle, so match the side to your steering wheel layout.

Frequently Asked Questions

What material are the paddles made of?
They are made of aluminium alloy with a dull polish finish. The aluminum alloy surface is sandblasted and given anodic oxidation.

Which Mercedes-Benz models do they fit?
They fit the A-Class (W176), B-Class (W246), C-Class (W205), E-Class (W212), CLA (W117), CLS, GLA (X156), GLC (W/X253), GLE (W166/W292) and S-Class (W222). They do not fit all AMG models.

What does the pack contain?
The pack is one pair: a left and a right paddle. Each paddle measures 15.3 × 5.7 cm (6 × 2.24 in).

How are the paddles attached?
Each paddle attaches with double-sided tape. The +/- symbols are etched on the top of each blade, so you can tell the plus and minus sides apart.

Which colors are available?
The paddles come in black, silver, blue and red.

Key Features

• Model Y Juniper Fit — Shaped for the Tesla Model Y Juniper side door panels, covering the areas they guard against kicks and scuffs.
• Artificial Leather Surface — Made from artificial leather with a PU leather construction, so the panels have a leather-look finish.
• Dirt and Stain Design — The panel design repels dirt and stains to help keep the door area clean.
• Original Car Black — Available in original car black.

Product Specifications

• Colour: Original car black
• Material: Artificial leather
• Compatible models: Tesla Model Y Juniper 2025-2026; Tesla Model Y Juniper Launch
• Pack Contents: 1 set, 4 pieces

What It Is / How It Works

These car door anti-kick pads are side door panel protectors made for the Tesla Model Y Juniper. They are made of artificial leather and sit on the door panels to help guard against scratches and marks.

Who It's For / Use Cases

Car door kick pads suit owners who want to guard door panels from scuffs caused by shoes, bags and daily entry and exit. They also suit drivers who want the door area to look neat with a leather-look finish.

How to Use / Care

1. Place the pads on the car door panels of a Tesla Model Y Juniper to protect the panel area from kicks and scratches.

How to Choose

Start by confirming the vehicle is a Tesla Model Y Juniper from 2025 to 2026, since that is the model listed for this protector. Next, consider the material: this set is artificial leather, which suits owners who want a leather-look finish on the door area. Finally, match the color to your interior; this set is original car black.

Frequently Asked Questions

Which vehicle is this made for?
It is made for the Tesla Model Y Juniper, model years 2025 to 2026, and is designed to fit the side door panels of that model.

What material are the pads made from?
They are made from artificial leather with a PU leather construction. The material is listed in the specifications above.

How many pieces come in one order?
One set includes 4 pieces, so one set covers the door panel protectors for the vehicle.

Do the pads help with dirt and stains?
The panel design repels dirt and stains, which helps keep the door area cleaner between washes.

Key Features

• Juniper 2025 Fit — It fits the Tesla Model Y Juniper 2025.
• Launch and Refreshed Fit — It fits the Tesla Model Y Launch 2025 and the Model Y Refreshed Edition / Project Juniper.

Product Specifications

• Material: TPE
• Compatible models: Tesla Model Y Juniper 2025; Tesla Model Y Launch 2025; Model Y Refreshed Edition / Project Juniper
• Model years: After 2025

What It Is / How It Works

This threshold strip is a door sill protector for the Tesla Model Y interior. It is made of TPE and fits the Tesla Model Y Juniper 2025.

Door sill protectors are interior trim pieces that sit along the threshold of a car door.

Who It's For / Use Cases

Door sill protectors suit Tesla Model Y owners who want a strip along the front or rear door threshold. It is sold as front and rear threshold strips and fits the Model Y Launch 2025 and Refreshed Edition.

How to Use / Care

1. Use it along the door sill of the Tesla Model Y Juniper 2025 as an anti-kick pad.
2. Keep it on the front or rear door threshold where it is placed.

How to Choose

Choose a door sill protector by matching it to your vehicle.

Frequently Asked Questions

What is it made of?
It is made of TPE.

Which Tesla Model Y models does it fit?
It fits the Tesla Model Y Juniper 2025, the Model Y Launch 2025, and the Model Y Refreshed Edition / Project Juniper.

Is it sold for the front or rear doors?
It is sold as front and rear threshold strips.

Which model years does it cover?
It is for Model Y vehicles from after 2025.

Who is the brand?
The brand is YouGallop.

Key Features

• Chrome-Plated Finish — The lock cylinder is made from PC+ABS with a chrome plating finish.
• Decorative Lock Core — It is a decorative lock core, so it cannot lock the storage box.
• Mercedes BENZ Fit — It is made for the glove box switch handle on Mercedes BENZ vehicles.

Product Specifications

• Material: PC+ABS+Chrome Plating
• Vehicle make: Mercedes BENZ
• OEM number: 2036800384
• Function: Decorative lock core; cannot lock the storage box

What It Is / How It Works

This car glove box switch handle lock cylinder is a replacement part for the glove box handle area on Mercedes BENZ vehicles. It is a decorative lock core, not a lock for the storage box.

Who It's For / Use Cases

Car owners and parts buyers replacing a glove box handle lock cylinder on a Mercedes BENZ are the typical audience for this type of part. Because this lock core does not secure the storage box, it suits buyers who do not need that locking function.

How to Use / Care

1. Use it to replace the glove box switch handle lock cylinder on a Mercedes BENZ vehicle.
2. Do not rely on it to lock the storage box, since it is a decorative lock core.

How to Choose

Start with the vehicle: confirm the Mercedes BENZ model matches the part you are replacing, using the Vehicle make row in Product Specifications.

Consider the finish: this one is PC+ABS with a chrome plating finish, which suits buyers who want a metallic look on the handle area.

If you need the glove box itself to lock, this decorative lock core does not provide that function, so choose accordingly before ordering.

Frequently Asked Questions

Does this lock cylinder secure the glove box?
No. It is a decorative lock core and cannot lock the storage box, so it does not secure the glove box.

What material is it made from?
It is made from PC+ABS with a chrome plating finish, as shown in the Material row of Product Specifications.

Which vehicles is it for?
It is made for the glove box switch handle on Mercedes BENZ vehicles. The Vehicle make row in Product Specifications gives the brand.

What is the OEM number?
The OEM number is 2036800384, shown in the OEM number row of Product Specifications.

Is it sold as a replacement part?
Yes, it is sold as a replacement part for the Mercedes BENZ glove box switch handle lock cylinder.

Key Features

• Vehicle Fit — It fits the Suzuki SX4 and Swift RW415, RW416 and RW420 for 2006-2012 models.
• Mounting Hole Spacing — The mounting holes are approx. 3.4cm (1.3inch) apart.
• Compact Size — It measures approx. 8.6x6x3cm (3.4x2.4x1.2inch) (LxWxD).

Product Specifications

• Material: PP plastic
• Color: Black
• Compatible With: SX4 Swift RW415 RW416 RW420 2006-2012
• Distance between mounting holes: approx. 3.4cm (1.3inch)
• Size: approx. 8.6x6x3cm (3.4x2.4x1.2inch) (LxWxD)
• Item included: 1 x Car Glove Box Lid Handle

What It Is / How It Works

Glove box lock latch handles are replacement parts for the lid of a car's glove box. They hold the lid closed and give a grip for opening it.

This car glove box lock latch handle is black and made of PP plastic.

Who It's For / Use Cases

Glove box lock latch handles suit car owners who need a replacement lid handle for a glove box that has worn or broken. They also suit parts buyers and repair shops ordering a single replacement handle for a vehicle of the matching model and year range.

How to Use / Care

1. Use it as a replacement glove box lock latch handle for a vehicle that matches the Compatible With row in Product Specifications.
2. Compare the mounting hole spacing in Product Specifications with the handle you are replacing before you fit it.

How to Choose

Start with the vehicle. The Compatible With row gives the Suzuki SX4 and Swift RW415, RW416 and RW420 for 2006-2012. Next, compare the mounting holes, which are approx. 3.4cm (1.3inch) apart, with the handle you are replacing. 8.6x6x3cm (3.4x2.4x1.2inch) against the space in your glove box.

Frequently Asked Questions

Which vehicles does it fit?
It fits the Suzuki SX4 and Swift RW415, RW416 and RW420 for 2006-2012 models. The Compatible With row in Product Specifications gives the same list.

What is it made of?
It is made of PP plastic and is black.

How far apart are the mounting holes?
The mounting holes are approx. 3.4cm (1.3inch) apart.

How big is it?
It measures approx. 8.6x6x3cm (3.4x2.4x1.2inch) (LxWxD).

What does the pack include?
One car glove box lid handle is included.

Key Features

• Honda CR-V Fit — It fits the Honda CR-V for model years 2007 through 2011.
• OEM Reference — OEM number 77540-SWA-A01 77540SWAA01 is the reference number for this part.

Product Specifications

• Color: Beige
• For OEM number: 77540-SWA-A01ZB 77540SWAA01ZB
• Compatible models: Honda CR-V 2007, 2008, 2009, 2010, 2011; Honda CRV 2007–2011

What It Is / How It Works

This beige car glove box lid latch is a lock handle for the glove box lid of a Honda CR-V from model years 2007 through 2011.

Glove box latches and lock handles are small interior parts that hold a storage box lid closed and release it when it needs to open.

Who It's For / Use Cases

Lid latches of this kind suit car owners who need a replacement glove box lock handle that matches their vehicle's model year and original part number.

How to Use / Care

1. Use it to latch and lock the glove box lid.

How to Choose

Start with the vehicle. Match the model years in Compatible models and the part number in Product Specifications against your original glove box lock handle before ordering.

Frequently Asked Questions

Which vehicles does it fit?
It fits the Honda CR-V for model years 2007 through 2011.

What is the part number?
The part number is 77540-SWA-A01 77540SWAA01, and the related OEM number is 77540-SWA-A01ZB 77540SWAA01ZB.

What color is it?
It is beige.

Who is the brand?
The brand is RLB-HILON.

Key Features

• Plastic Construction — The latch handle lock is made of plastic.
• Measured Size — It measures about 17.4*7.9cm.

Product Specifications

• Material: Plastic
• Size: about 17.4*7.9cm
• Package Included: 1pcs

What It Is / How It Works

This glove box latch handle lock is a plastic latch for a car's glove compartment. Glove box latch handle locks are small car interior parts that hold the glove box door closed and open when the handle is operated.

Who It's For / Use Cases

Glove box latch handle locks suit car owners who want a latch for the glove compartment, especially people replacing a worn or broken glove box latch. They are a practical choice for drivers who keep items stored in the glove box and want the door to stay closed.

How to Use / Care

1. Use it to latch the glove box compartment of a car.

How to Choose

Start by comparing the measurements with the latch area of your glove box before ordering. Plastic latch parts are lightweight and suit the light-duty role of a glove box door. Match the size to the existing latch opening so the handle operates smoothly and the door closes as it did before.

Frequently Asked Questions

What is it made of?
It is made of plastic.

What size is it?
It measures about 17.4*7.9cm, or 6.9 × 3.1 in.

How many pieces come in the package?
The package includes 1pcs.

Who makes it?
The brand is Hoeaden.

Key Features

• ABS Construction — It is made of ABS plastic.
• Model Fit — It fits the Changan Kaicene/Hunter F70.
• Lock Hole Cover — It is a handle clip that covers the glove box lock hole on the glove box lid.

Product Specifications

• Material: ABS
• Compatible models: Changan Kaicene/Hunter F70

What It Is / How It Works

This glove box lock latch handle is a car accessory for the glove box lid. It is a handle clip that covers the glove box lock hole, and it is made of ABS. It fits the Changan Kaicene/Hunter F70.

Who It's For / Use Cases

Glove box lock latch handles suit car owners who need a handle and clip for the glove box lid. This one is for the Changan Kaicene/Hunter F70, so it suits owners of that model who want a cover for the glove box lock hole.

How to Use / Care

1. Use it as a handle clip to cover the glove box lock hole on the glove box lid.

How to Choose

Choose by vehicle first: the fit depends on the car model, so confirm that your car is the Changan Kaicene/Hunter F70 before you order. Next, look at the material, which is ABS plastic, and check that it suits the glove box lock hole and lid you are covering.

Frequently Asked Questions

What is it made of?
It is made of ABS, a plastic.

What does it cover?
It is a handle clip that covers the glove box lock hole on the glove box lid.

Should I check my car model before ordering?
Yes, check your car's model against the Changan Kaicene/Hunter F70 before you order, since that is the vehicle this part is made for.

Key Features

• Vehicle Fit — Designed for the Toyota Highlander 2015-2021.
• Rear Seat Placement — Placed on the rear and 2nd row of the vehicle.
• Connector Design — Has a correct connector, and installation requires no cutting or splicing.
• Easy Installation — Easy install and durable use.

Product Specifications

• Vehicle Fit: Toyota Highlander 2015-2021
• Placement on Vehicle: Rear and 2nd Row
• Material: PP
• Package Contents: 1 auto seat rail cover
• Measurement Tolerance: Allowed error +/- 1-3 cm

What It Is / How It Works

This car rear seat rail cover is a replacement auto interior part for the 2nd row middle seat track on the Toyota Highlander 2015-2021.

Who It's For / Use Cases

Car rear seat rail covers suit Toyota Highlander owners who need a replacement cover for a rear or second-row seat rail, including cases where the original cover is worn, damaged, or missing. They also suit owners who want a matching interior part for the rear seating area.

How to Use / Care

1. Easy install and durable use: fit the cover on the rear and 2nd row middle seat rail of the Toyota Highlander 2015-2021.

How to Choose

Start with the vehicle. This cover is listed for the Toyota Highlander 2015-2021, so confirm your vehicle matches that model and year range before ordering. Next, check seat position. The cover is for the rear and 2nd row, so it suits the middle seat rail in that area. Material is PP, a plastic, so it suits the interior rail cover role it is made for. Finally, allow for small size differences: the measurement allowed error is +/- 1-3 cm, so compare the cover to your existing rail cover if you have one.

Frequently Asked Questions

Which vehicle is this cover for?
It is made for the Toyota Highlander 2015-2021 and is placed on the rear and 2nd row middle seat rail.

What material is it made from?
The material is PP, as shown in the Specifications section.

What do I receive in the package?
The package contains 1 auto seat rail cover.

Does installation require cutting or splicing?
No. The connector is designed so installation requires no cutting or splicing.

Why might the color or size look slightly different from the photos?
Lighting and display settings can change how the color appears, and the measurement allowed error is +/- 1-3 cm.

Key Features

• Heat-Resistant Materials — The materials are heat-resistant and made for long-term use.
• Replacement Part — It is made for replacing a damaged armrest box lock.

Product Specifications

• Compatible models: Mitsubishi Pajero 2000-On; Mitsubishi Montero 2000-On; Mitsubishi For Pajero For Montero Upper/Lower Glove
• Material: ABS
• Color: Black
• Pack: 1 armrest box lock
• Part numbers: MR532555, MR532556

What It Is / How It Works

This armrest box lock is a replacement car part for the armrest box of a Mitsubishi Pajero or Montero. It is made of ABS and is black.

Who It's For / Use Cases

Owners of a Mitsubishi Pajero or Montero from 2000 on who need to replace a damaged armrest box lock are the buyers this part is for. Parts buyers who source a replacement centre console latch for these vehicles can use it the same way.

How to Use / Care

1. Use it as a replacement for a damaged armrest box lock.
2. Use it only on Mitsubishi Pajero or Montero models from 2000 on.

How to Choose

Start with the vehicle: a Mitsubishi Pajero or Montero from 2000 on. Next, compare the part number MR532555/MR532556 with the number on the part you are replacing.

Frequently Asked Questions

Which vehicles does it fit?
It fits Mitsubishi Pajero 2000-On and Mitsubishi Montero 2000-On. Check your model and year against that range before you order.

What is the part number?
The part numbers are MR532555 and MR532556, shown together as MR532555/MR532556.

What is it made of?
It is made of ABS and is black.

Is the material heat-resistant?
The materials are heat-resistant and pressure-resistant, and the part is made for long-term use.

How many does the pack contain?
The pack has one armrest box lock.