Key Features

• Vehicle Fit — It fits the Toyota Camry XV40 from 2006 to 2011.
• Tool Storage Buckle — It is a buckle for holding tools in the glove box.

Product Specifications

• Material: Plastic
• Color: Beige
• Placement on Vehicle: Left
• Vehicle fit: Toyota Camry XV40, 2006-2011
• Condition: New
• Fitment Type: Direct Replacement

What It Is / How It Works

This glove box bracket is a plastic tool storage buckle for the left side of the glove compartment on a Toyota Camry XV40 from 2006 to 2011. Glove box brackets are small interior parts that give a glove compartment a fixed point for small tools and accessories.

Who It's For / Use Cases

Owners of a Toyota Camry XV40 from 2006 to 2011 who need a left-side bracket for the glove box will find this part suits that job. Glove box brackets in general suit drivers who want a fixed holder for small tools in the glove compartment.

How to Use / Care

1. Use the buckle on the left side of the glove box to hold tools and small accessories.

How to Choose

Start with the side. This part is for the left side of the glove box, so confirm that the Placement on Vehicle row says Left before you order.

Match the model and year. It fits the Toyota Camry XV40 from 2006 to 2011, so compare your car's model and year with that range.

Check the material and colour. It is made of plastic and comes in beige.

Frequently Asked Questions

Which car does it fit?
It fits the Toyota Camry XV40 from 2006 to 2011. Compare your car's model and year with that range before you order.

Which side does it fit?
It is for the left side of the glove box, with Placement on Vehicle set to Left.

Is it a direct fit?
Its fitment type is Direct Replacement, for the Toyota Camry XV40 from 2006 to 2011.

What is it made of?
It is made of plastic and comes in beige.

What does it hold?
It is a tool storage buckle for the glove box, so it is meant for holding small tools.

Key Features

• Volvo XC90 Fitment — This replacement latch is listed for Volvo XC90 vehicles with 2.5L, 2.9L, 3.2L and 4.4L engines in the 2003 to 2013 model years.
• New Condition — The item is described as new, at 100 percent condition.
• Single Piece Latch — The package covers one box-handle latch piece for the glove compartment lid.
• OEM Reference Number — The OEM reference number 30643013 is shown for matching against the original part.

Product Specifications

• Vehicle Fitment: Volvo XC90, model years 2003–2013
• Engine Sizes: 2.5L, 2.9L, 3.2L, 4.4L
• OEM Number: 30643013
• Condition: New

What It Is / How It Works

This glove compartment box lid lock latch handle is a replacement latch for the lid of a vehicle glovebox. Glovebox latches hold the lid closed and let the handle release it when the lid needs to open. This listing is for one box-handle latch piece sized for Volvo XC90 vehicles.

Who It's For / Use Cases

Replacement glovebox lid latches suit vehicle owners and repair shops who need to replace a worn or broken lid lock handle on a compatible model. Parts buyers who are matching a glovebox latch to an original OEM number often look for this type of listing when restoring a dashboard lid closure.

How to Use / Care

1. Use this latch as a replacement glove compartment box lid lock handle on Volvo XC90 vehicles from the 2003 to 2013 model years.

How to Choose

Start by confirming the vehicle year and engine size against the Vehicle Fitment and Engine Sizes rows in Product Specifications. The fitment range covers 2003 to 2013 with 2.5L, 2.9L, 3.2L and 4.4L engines.

Next, compare the OEM Number in Product Specifications against the number printed on the original glovebox latch. Matching OEM numbers are a practical check when choosing a replacement latch for a lid lock handle.

Frequently Asked Questions

Which Volvo XC90 model years does this latch fit?
The fitment information covers Volvo XC90 model years 2003 through 2013, with 2.5L, 2.9L, 3.2L and 4.4L engine options.

How many pieces are in this listing?
The listing is for one box-handle latch piece, which is the glovebox lid lock handle part.

What OEM number is associated with this latch?
The OEM reference number is 30643013. Compare it with the number on your original part before ordering.

Is this latch new?
The item is described as new at 100 percent condition, which is the condition stated for this replacement latch.

How should I confirm the right latch for my vehicle?
Check the Vehicle Fitment and Engine Sizes rows in Product Specifications against your car's model year and engine, then compare the OEM Number with your original glovebox latch.

What It Is / How It Works

A glove box lock handle trim cover is an interior trim piece that sits around the handle, knob and latch area of a glove compartment.

Who It's For / Use Cases

Buyers who need a replacement for a worn, cracked or missing glove box handle trim should match the vehicle's model year and the glove box side before ordering.

How to Choose

Start with the vehicle. Next, check the side. The internal right glove box trim is a different location from the left side, so match the side to the area you are replacing. Finally, look at the handle or knob shape around your current lock so the cover lines up with the opening you need to cover. If the trim area on your car looks different from what you expect, compare the part with the old piece before fitting it.

Frequently Asked Questions

Which vehicle is this trim cover listed for?
Check your model year against that range before ordering.

Which side of the dashboard is it for?
It is for the internal right glove box compartment area. Confirm the glove box side on your car before fitting.

What area does this cover?
It covers the trim around the glove compartment lock, latch and opener handle, so the surrounding trim area is covered.

Is this a complete glove box?
No. It is a trim cover for the lock and handle area, not the glove box itself.

How can I confirm it matches my car?
Compare the Audi Q3 model year and the right-side glove box location with your vehicle before you fit it.

Key Features

• Direct Replacement Fit — It is sold as a direct replacement for a broken or damaged glove box latch.

Product Specifications

• Material: Plastic
• Part Name: Glove Box Lock Latch
• Fitment Type: Direct Replacement
• Piece Count: 1
• Part number: 68630-1MA2B
• Compatible models: Infiniti M Series Q50L Q70L Passenger Side Glove

What It Is / How It Works

This is a glove box latch, the small catch that holds the glove box lid closed. It is a replacement part for Infiniti Q50L and Q70L models.

Who It's For / Use Cases

Glove box latches suit car owners who need to replace a broken or damaged lid catch and want a direct replacement part for that position. Parts buyers and repair shops that stock interior replacement parts may also look for a single-piece catch of this kind.

How to Use / Care

1. Use it to replace a broken or damaged glove box latch.

How to Choose

Start with the part number, 68630-1MA2B, and compare it with the original part before you buy. Choose a direct replacement type so the new latch matches the part it replaces. Check that the side and vehicle model match your car's glove box.

Frequently Asked Questions

What is the part number?
The part number is 68630-1MA2B. Compare it with your original latch before ordering.

What material is it made of?
It is made of plastic, so it is a non-metal replacement latch.

Is it a direct replacement?
Yes. It is sold as a direct replacement for a broken or damaged glove box latch, so it is meant to take the place of the original part.

How many pieces come in a pack?
The pack has one piece.

Key Features

• Plastic Build — The handle is made of plastic, and the piece weighs 40 g (0.09 lb).
• One Piece Pack — The pack includes one glove box lock.
• Professional Installation Advised — No instructions are included, so professional installation is highly recommended.

Product Specifications

• Colour: Grey Beige
• Piece Count: 1 pcs
• Material: Plastic
• Size: approx. 5.2x 5.1cm(3.4 x 1.5 inch) (LxW)

What It Is / How It Works

Drivers who prefer to fit a replacement themselves or through an installer will find a single-piece latch a straightforward swap when the mounting points match their car. Glove compartment latch handles are the part that holds the glove box closed and releases it when pulled.

Who It's For / Use Cases

Car owners who need to replace a glove compartment latch handle suit this kind of part, especially when the original handle no longer opens or closes the glove box smoothly. Drivers who prefer to fit a replacement themselves or through a installer will find a single-piece latch a straightforward swap when the mounting points match their car.

How to Use / Care

1. Use it to replace a glove box latch handle on a car.

How to Choose

Start by confirming your car is a Toyota Corolla of the AE100, AE101, EE100 or EE101 generation from 1992–1996, since fit depends on the model code and year. Compare the handle shape and mounting points with your original part before fitting, because no instructions are included.

Frequently Asked Questions

What is it made of?
It is made of plastic.

How big is it and how much does it weigh?
It measures approx. 5.2x 5.1cm(3.4 x 1.5 inch) (LxW) and weighs 40 g (0.09 lb).

How many pieces come in the pack?
One glove box lock is included in the pack, and the piece count is 1 pcs.

Which car does it fit?
It fits the Toyota Corolla AE100, AE101, EE100 and EE101 (1992–1996).

Are installation instructions included?
No instructions are included, and professional installation is recommended.

Key Features

• Suzuki SX4 Swift Fit — It fits the Suzuki SX4 Swift RW415, RW416 and RW420 from 2006 to 2012.
• Lid Handle Function — It is a handle for the glove box lid.
• Mounting Hole Spacing — The mounting holes are about 3.4 cm (1.3 inch) apart.
• Overall Dimensions — It measures about 8.6 x 6 x 3 cm (3.4 x 2.4 x 1.2 inch).

Product Specifications

• Compatible With: Suzuki SX4 Swift RW415, RW416, RW420 (2006-2012)
• Material: PP plastic
• Color: Black
• Size: approx. 8.6 x 6 x 3 cm (3.4 x 2.4 x 1.2 inch) (L x W x D)
• Distance between Mounting holes: approx. 3.4 cm (1.3 inch)
• Item included: 1 x Car Glove Box Lid Handle

What It Is / How It Works

This car glove box lid handle is a grip for the lid of a glove compartment. Glove box lid handles are usually small plastic grips that let the lid be lifted and closed by hand.

Who It's For / Use Cases

Glove box lid handles suit car owners who need to replace a worn, cracked or missing grip on a glove compartment lid. Repair shops that handle this job for customers will also find the type useful for routine lid repairs on the vehicles they service.

How to Use / Care

1. Use it as a replacement glove box lid handle for a compatible vehicle.

How to Choose

Start with the vehicle. Match the model and year to the Compatible With row in Product Specifications before ordering. Material and colour are the other selection points, and this one is black PP plastic.

Frequently Asked Questions

Which vehicles does it fit?
It fits the Suzuki SX4 Swift RW415, RW416 and RW420 from 2006 to 2012. Match your model and year to that range before you order.

What is it made of?
It is made of PP plastic and comes in black.

How far apart are the mounting holes?
The mounting holes are about 3.4 cm (1.3 inch) apart.

What is in the package?
The package includes one car glove box lid handle.

Key Features

• Metal Construction — The trim is made of metal.
• BMW 3 Series Fit — It is designed to fit BMW 3 Series 3GT F30, 316 and 320 models from 2013-2019.
• Interior Decoration Use — It is intended as interior decoration for the gearshift, AC and CD button panel and door armrest areas.

Product Specifications

• Material: Metal
• Vehicle fit: BMW 3 Series 3GT F30, 316, 320; 2013-2019
• Application area: Gearshift panel, AC and CD button panel, door armrest
• Compatible models: BMW 3 4 Series 3GT F30 F32 F34

What It Is / How It Works

This car interior trim accessory is made of metal and is intended for the interior of BMW 3 Series 3GT cars. It is a decorative cover for the panels around the gearshift, the AC and CD buttons and the door armrest.

Who It's For / Use Cases

Interior trim covers suit drivers who prefer a tidy, finished cabin and want a visual update without replacing larger interior parts.

How to Use / Care

1. Use it as interior decoration on the gearshift panel.
2. Use it as interior decoration on the AC and CD button panel area.
3. Use it as interior decoration on the door armrest area.

How to Choose

Start with the panel you want to decorate: the gearshift area, the AC and CD button panel or the door armrest. Compare the metal finish and the shape against the surrounding trim so the piece sits neatly in your cabin.

Frequently Asked Questions

What is this car interior accessory made of?
It is made of metal, which is the material for this product.

Which BMW models does it fit?
It is designed to fit BMW 3 Series 3GT F30, 316 and 320 models from 2013-2019. The Vehicle fit row in Product Specifications gives the same details.

Where is it placed in the cabin?
It is intended as decoration for the gearshift panel, the AC and CD button panel and the door armrest area of a BMW 3 Series 3GT.

How should I check fit before ordering?
Match your car's model and build year to the Vehicle fit row before ordering. That row covers BMW 3 Series 3GT F30, 316 and 320 models from 2013-2019.

Key Features

• Front Passenger Side — It is made for the front passenger side of the car.
• Left-Hand Drive Only — It is made for left-hand drive cars only.
• PC and ABS Build — It is made from PC and ABS plastic with a rubber oil-painted finish and a chromed surface.
• Replacement Part — It is sold as a replacement glove box handle, lock latch and switch cover for the Mercedes-Benz S-Class W222.

Product Specifications

• Color: Black, Light Beige
• Material: PC and ABS plastic with rubber oil painting and chromed finish
• Weight: 20 g (0.7 oz)
• Placement on Vehicle: Front Passenger Side
• Other Part Number: W222
• OEM Number: 22268000919H15, 22268000918S05

What It Is / How It Works

This is a replacement glove box lock latch handle switch cover for the front passenger side of a Mercedes-Benz S-Class W222. It is made for the 2014-2020 model years and for left-hand drive cars only. It is made from PC and ABS plastic with a rubber oil-painted finish and a chromed surface.

Who It's For / Use Cases

Owners of left-hand drive Mercedes-Benz S-Class W222 cars from 2014-2020 who need a replacement glove box handle switch cover for the front passenger side are the buyers this part is made for. It suits anyone repairing or replacing the worn or damaged cover around that glove box handle.

How to Use / Care

1. Use it on left-hand drive Mercedes-Benz S-Class W222 cars from 2014-2020 only, on the front passenger side.
2. If you cannot replace the part well by yourself, re-adjust it or take it to a local professional maintenance shop to have it installed.

How to Choose

Start with the vehicle: this part is for left-hand drive Mercedes-Benz S-Class W222 cars from 2014-2020. Confirm your model year and steering side before ordering. Compare the dimensions of 50 mm (1.97 in), 82 mm (3.2 in) and 38 mm (1.5 in) with the part you are replacing. Choose black or light beige to match your interior color.

Frequently Asked Questions

Which vehicles is this part made for?
It is made for Mercedes Benz S Class W222 models from 2014-2020, and only for left-hand drive cars.

Which side of the car does it fit?
It fits the front passenger side. The part is sold with Front Passenger Side as its placement on the vehicle.

What is it made of?
It is made from PC and ABS plastic with a rubber oil-painted finish and a chromed surface.

What size and weight is it?
It measures 50 mm (1.97 in), 82 mm (3.2 in) and 38 mm (1.5 in), and it weighs 20 g (0.7 oz).

Which OEM numbers are listed for this part?
The OEM numbers listed for this part are 22268000919H15 and 22268000918S05, and the other part number is W222.

Key Features

• ABS Construction — The latch is molded from ABS plastic.
• Direct Replacement Fit — Installation is easy because it works as a direct replacement for the original latch.
• Replaces Broken Parts — It is made to replace a glove box latch that is broken or damaged.
• One Latch Per Pack — Each pack contains one glove box latch.

Product Specifications

• Material: ABS
• Color: Gray
• Quantity: 1 glove box latch
• Application: For Suzuki Vitara 2000-2018 and For Suzuki Grand Vitara 2000-2018
• OE Part Number: 73430-76811-P4Z

What It Is / How It Works

This glove box latch is an interior replacement part for the glove compartment door. Glove box latches are small handles that hold the compartment door shut and release it when pulled, so a worn or cracked one can stop the door from latching properly. This latch is molded from ABS plastic and has a gray finish.

Who It's For / Use Cases

Glove box latch replacements suit Suzuki owners whose glove compartment door no longer latches because the original handle is worn, cracked, or broken. They are also a practical choice for anyone who wants to swap one small interior part instead of replacing a larger dashboard assembly.

How to Use / Care

1. Use it to replace a broken or damaged glove box latch on a Suzuki Vitara or Grand Vitara from 2000 to 2018.
2. Before you use it, make sure the form and OE number match your old part, which is OE number 73430-76811-P4Z.

How to Choose

Start by matching the original part. Compare the shape of the old latch with the new one and check the OE number on your old part. Matching the form and OE number is the most direct way to confirm a replacement suits your model. If the finish matters for your dashboard, the gray color is listed in the Specifications table.

Frequently Asked Questions

What is this part made of?
It is made of ABS plastic and has a gray finish.

Which vehicles does it cover?
The specifications state Suzuki Vitara 2000-2018 and Suzuki Grand Vitara 2000-2018. Check the year range against your vehicle before ordering.

How many latches come in one order?
Each pack contains one glove box latch.

How can I confirm this is the right part?
Make sure the form and OE number are the same as your old part. The OE part number is 73430-76811-P4Z.

Is it a replacement for a broken latch?
It is made to replace a glove box latch that is broken or damaged. Installation is described as easy because it works as a direct replacement.

Key Features

• Silicone Material — It is made of silicone, which gives the cover a flexible surface for the cup holder area.

Product Specifications

• Material: Silicone

What It Is / How It Works

This cup holder cover is a protective pad for the cup holder area of a vehicle center console. It is made of silicone.

Who It's For / Use Cases

Cup holder covers suit drivers and passengers who want a protective layer for a console cup holder that sees daily use from drinks, coins, and keys. They suit owners who prefer a simple accessory that keeps the holder tidy and easy to keep clean.

How to Use / Care

1. Use it to protect the cup holder area of a center console.

How to Choose

Start by measuring the cup holder you want to cover so the pad fits the space without bunching or sliding out of place. Silicone is the material named for this cover, so consider whether a flexible silicone surface suits how you use the holder. Choose a pad sized for the holder shape in your console rather than a generic size. Pick the option that matches your console layout.

Frequently Asked Questions

What is this product made of?
It is made of silicone.

What area does a cup holder cover protect?
Cup holder covers are made for the cup holder area of a center console, where drinks and small items usually rest.

How should I choose the right size?
Measure the holder opening in your console first, then compare that space with the cover before you buy. A pad that matches the holder shape sits flatter and stays in the space you want to cover.

Key Features

• Custom Armrest Fit — The cover is custom made for MINI F65, F66 and F67 models only, so it is sized for those armrest boxes.
• OEM Mold Shape — The shell is a 1:1 OEM mold made to match the original car armrest.
• Scratch Resistant Surface — The surface is described as scratch resistant and wear-resistant.
• Adhesive Paste Install — A built-in strong adhesive lets the cover be pasted on without cutting or drilling.
• Easy Wipe Finish — The finish is anti-fingerprint and wipes off everyday dirt easily.

Product Specifications

• Material: ABS
• Fitment: For MINI COOPER F66 F65 F67 2025 2026
• Installation Location: Car Armrest Box
• Installation Method: Car Covered Adhesive Bonding
• Sticker Placement: Center Console
• Style: Carbon fiber black, piano black, pepper white, red, pink, yellow, wood grain brown

What It Is / How It Works

This car center console armrest box panel trim cover is a decorative shell that fits over the armrest box area of MINI F65, F66 and F67 models. Armrest box trim covers are a category of interior accessories that sit on top of the armrest lid to change its look. This cover uses covered adhesive bonding for installation.

Who It's For / Use Cases

Armrest box trim covers suit owners of the listed MINI models who want to change the look of the center console area inside the cabin. They suit shoppers who prefer a decorative trim cover over replacing the whole armrest box. Buyers who want an exact match should check the model and year details in Product Specifications before ordering.

How to Use / Care

1. Use the cover as a decorative trim piece on the center console armrest box of MINI F65, F66 and F67 models, the installation location shown in Product Specifications.

How to Choose

Start with the model and year. Confirm the MINI model (F65, F66 or F67) and the model year in Product Specifications before ordering. Next, choose the finish. The color range includes carbon fiber black, piano black, pepper white, red, pink, yellow and wood grain brown, so pick the one that suits your cabin. Material is ABS, a rigid plastic type common in interior trim.

Frequently Asked Questions

Which MINI models does this cover fit?
It is custom made for MINI F65, F66 and F67 models only, and the fitment details list the 2025 and 2026 model years.

How is the cover attached?
It uses a built-in strong adhesive for paste-on installation, with no cutting or drilling. The installation method is covered adhesive bonding on the car armrest box.

Which colors can I choose?
Options are carbon fiber black, piano black, pepper white, red, pink, yellow and wood grain brown.

Does it fit the original armrest without gaps?
The cover is a 1:1 OEM mold for the original car armrest, and its fit is described as no gap and no loose.

Key Features

• Direct Replacement Part — It works as a direct replacement for an old or broken glove box lock.
• Glove Box Latch — It works as a glove box lock latch handle for the glove box lock hole.
• Suzuki Vehicle Fit — It fits Suzuki Jimny, Vitara and Grand Vitara models.

Product Specifications

• Color: Gray
• Material: ABS
• Part number: 7343076811P4Z

What It Is / How It Works

This car glove box lock latch handle is a replacement part for the glove box of the vehicles listed for it. It is made of ABS plastic and is gray.

Who It's For / Use Cases

Glove box latch replacements suit car owners whose glove box lid no longer latches or whose handle has broken. They also suit drivers who want to match a worn part to the vehicle models it is sold for before they order.

How to Use / Care

1. Use it to replace a worn or broken glove box lock latch handle.

How to Choose

Match your vehicle's make, model and year to the models this part is made to fit before you order. Gray is the color this version comes in, so choose it if you want a gray finish. Compare part number 7343076811P4Z with your old latch to confirm the match.

Frequently Asked Questions

Which vehicles is it made to fit?
It fits Suzuki Jimny 1998-2018, Suzuki Grand Vitara 1997-2017, Chevrolet Tracker 2000 (Vitara), Chevrolet Tracker (1998, 1989-1991 Canada), GMC Tracker and Pontiac Sunrunner.

What is it made of?
It is made of ABS plastic.

Will it replace my old glove box lock?
It is sold as a direct replacement for an old or broken glove box lock.

What is the part number?
The part number is 7343076811P4Z.

What color is it?
It is gray.

Key Features

• ABS Material — The cover is made of ABS, a plastic commonly used for small interior trim parts.
• Fits Any Door — It has no front, rear, left or right orientation, so the same cover can be used on all four doors.
• Original Colour Finish — It is designed in the original car colour to blend with the existing interior trim.

Product Specifications

• Material: ABS
• Door position: Front, rear, left and right doors (universal)
• Color: Original car colour
• OEM number: 51211805643, 51429171769

What It Is / How It Works

This is a car interior door lock cover, a small trim part that sits around the door lock pin and screw knob area. It is made of ABS and sold as a replacement trim piece for the original cover.

Door lock trim covers are typically small plastic caps that protect the lock hardware and help the interior panel look neat. Car owners often replace them when the original cap is cracked, lost or faded.

Who It's For / Use Cases

Car owners who need a replacement door lock screw cover for an interior door will find this type of part suitable. It suits people repairing worn trim on a car door panel, and independent repair shops that source interior trim parts for vehicles.

How to Use / Care

1. If you do not install it yourself, take it to a repair shop for installation.

How to Choose

Compare your original part's number with the OEM numbers shown in Product Specifications before ordering, so you can confirm the cover matches the part you are replacing.

When comparing door lock covers, check the material, the colour and whether the part is sold for all four door positions. Matching the colour to the car's interior trim keeps the look consistent across the cabin.

Frequently Asked Questions

What material is the cover made of?
It is made of ABS, the material shown in the Material specification. ABS is a plastic commonly used for small interior trim parts such as door lock covers.

Does it fit the front and rear doors?
It is described as universal across all four doors, with no front, rear, left or right distinction, so the same cover can be used on each door position.

Is installation included?
Installation is not part of the product. If you do not fit it yourself, a repair shop can install it.

What colour is the cover?
It is designed in the original car colour, so it is intended to match the existing door lock area trim.

Key Features

• Armrest Lock Design — It is an armrest lock cover for the center console armrest box latch.
• Original Factory Specifications — It is made to the original factory specifications of the car.

Product Specifications

• Material: Plastic
• Year: 2006, 2007, 2008, 2009, 2010, 2011
• Condition: Brand New
• Part number: 83451-SNA-A01ZA

What It Is / How It Works

This car armrest lock center arm rest box console latch cover is a plastic cover for the center console armrest box of a Honda Civic. It is an armrest lock cover made to the original factory specifications of the car.

Who It's For / Use Cases

Drivers of Honda Civic models from 2006 to 2011 who need a replacement center console armrest box latch cover will find this type of cover suits that job. Car owners who want a plastic console latch cover in the original factory shape for their vehicle will also find it fits this use.

How to Use / Care

1. Use it as a center console armrest box latch cover on a Honda Civic from the listed years.

How to Choose

Start by matching the vehicle to the listed Honda Civic models and years, 2006 through 2011. Compare the part number 83451-SNA-A01ZA with the part on your car before you buy. Choose a plastic armrest lock cover if your console latch is the part you need to replace.

Frequently Asked Questions

What is this part?
It is a center console armrest box latch cover with an armrest lock feature, made of plastic.

Which Honda Civic models and years does it cover?
It is listed for the Honda Civic FA1, FD1 and FD2 from 2006 to 2011.

Is it a new part?
Yes, the condition is brand new, and each piece weighs 10 g.

What is the part number?
The part number is 83451-SNA-A01ZA.

Key Features

• Wear-Resistant Build — It is wear-resistant and keeps its shape without deforming.
• Kia K3 Fit — It is made for the Kia K3 2012-2018.

Product Specifications

• Material: Zinc alloy
• Color: Black
• Vehicle fit: Kia K3 2012-2018
• OEM number: 84660A7000
• Installation: Direct installation
• Compatible models: Kia K3 12-18

What It Is / How It Works

This car armrest box lower lock buckle is a lock part for the lower section of a central armrest box. It is made of zinc alloy and fits the Kia K3 2012-2018. In a car, the lower buckle is the piece of the console lock that catches and holds the armrest lid.

Who It's For / Use Cases

Replacement lower lock buckles suit drivers who need a new latch for a central armrest box. Check your car's make, model and year against the vehicle fit in the specifications before you order.

How to Use / Care

1. Use it to replace the lower lock buckle on a central armrest box.

How to Choose

Start by matching the vehicle. This buckle is made for the Kia K3 2012-2018, so check your model and year first. It is black and made of zinc alloy, so compare the finish and material with the part you are replacing.

Frequently Asked Questions

Which vehicle does it fit?
It fits the Kia K3 2012-2018. Match your model and year before you order, since this buckle is for the central armrest box in that vehicle.

What is it made of?
It is made of zinc alloy. It is wear-resistant and keeps its shape without deforming.

How is it installed?
It is a direct-installation part. Check the vehicle fit before you fit it.

What is the OEM number?
The OEM number is 84660A7000. Use it to compare against the original part you are replacing.

What color is it?
It is black and made of zinc alloy.

Key Features

• Coaster Has Grippy — The coaster has a grippy surface that helps keep a cup from sliding around in the holder.
• Universal Fit — At 2.77 inches (7 cm) across, the coaster is sized to fit most car cup holders.

Product Specifications

• Piece Count: 2pcs
• Color: Black
• Material: Silicone and silica gel
• Size: 2.77 inch (7cm) in diameter and 2.23 inches (3.2mm) in thickness

What It Is / How It Works

These car cup holder insert coasters are small pads that sit inside a vehicle's cup holder slot. They help hold a drink's base steady and keep dust, spills and water from reaching the holder.

Who It's For / Use Cases

Cup holder coasters suit drivers and passengers who often keep drinks in a car and want the holder to stay cleaner. They suit people who use travel mugs or bottles that tend to slide around in a cup holder, and anyone who wants a simple non-slip insert for a vehicle's console.

How to Use / Care

1. Place a coaster in the car's cup holder slot to guard the slot from dust, beverage and water.
2. Keep the holder clean and non-stick by keeping the coaster in place and free of debris.

How to Choose

Start with fit. Compare the 2.77 inch (7cm) diameter with the opening of your cup holder so the coaster sits snugly. Material also matters: silicone and silica gel are common choices for non-slip holder inserts. If you have more than one holder to cover, the two-piece pack gives you a pair.

Frequently Asked Questions

What are the coasters made of?
The coasters are made of silicone and silica gel. Silicone is a common non-slip material for holder inserts.

Will they fit my cup holder?
Each coaster is 2.77 inch (7cm) in diameter and is sized as a universal fit for most car cup holders. Measure your holder's opening to confirm a snug fit.

How many coasters come in one pack?
Each pack contains two pieces, and the coasters are black.

Do they help keep the holder clean?
They protect the cup holder slot from dust, beverage and water, which helps keep the holder clean and non-stick.

Key Features

• Direct Replacement Fit — It is made as a direct replacement for a broken or damaged glove box lock handle cover.
• Plastic Construction — The cover is made of plastic, so it works as a replacement for the original trim piece.
• One Piece Per Pack — Each pack contains one cover, so you order one piece for one handle position.
• Three Color Options — The cover is offered in Black, Beige and Grey to suit different dash interiors.

Product Specifications

• Material: Plastic
• Fitment Type: Direct Replacement
• Color: Black, Beige, Grey
• Piece Count: 1

What It Is / How It Works

This is a glove box lock handle cover, a plastic direct replacement part for the dash panel handle area. It is offered for Captiva For Thailand 2007-2017, Captiva 4DR For Crossover 2011-2018, Captiva For C140 2011-2018 and Opel For Antara 2006-2017.

Who It's For / Use Cases

Replacement covers like this suit owners who need to swap out a cracked, worn or broken glove box lock handle cover without replacing the rest of the dash trim. They also suit anyone restoring the interior appearance of an older vehicle, where a single small trim part is the only thing that needs replacing.

How to Use / Care

1. Use it to replace a broken or damaged glove box lock handle cover on a matching vehicle.

How to Choose

Start with the vehicle model and year range, and match them to your car before you order. Choose the color that best fits your dash interior from Black, Beige or Grey. If your original cover carries a part number, compare it with the numbers on this page: 95183126, 95183127 or 95183128.

Frequently Asked Questions

What colors does the cover come in?
The cover is offered in Black, Beige and Grey, so you can pick the shade closest to your dash.

What material is it made from?
The cover is made of plastic and is sold as a direct replacement part for the glove box lock handle area.

How many pieces come in one pack?
One pack contains one piece, so one cover is supplied for each order line.

Which vehicles is it made for?
It is made for Captiva For Thailand 2007-2017, Captiva 4DR For Crossover 2011-2018, Captiva For C140 2011-2018 and Opel For Antara 2006-2017.

What part numbers does this cover match?
The part numbers are 95183126, 95183127 and 95183128, which are the numbers to compare against your original cover.

Key Features

• Right Passenger Side — It covers the right passenger side glove box handle position.
• Vehicle Fitment — It fits the VW Golf 6 and Jetta MK5.
• Latch Handle Cover — It covers the glove box lock latch handle.

Product Specifications

• Material: ABS plastic
• Color: Black
• Fitment: VW Golf 6 and Jetta MK5
• Interchange Part Number: 1K1857077B
• Items Included: 1 PC
• Condition: New
• Manufacturer Warranty: 1 Year

What It Is / How It Works

This glove box handle cover sits on the right passenger side and covers the glove box lock latch handle. It is made of ABS plastic and is sold as one piece.

Who It's For / Use Cases

Replacement handle covers suit car owners who need a new cover for a glove box latch handle after the old one has worn or broken. They suit anyone who prefers to replace only the cover rather than the whole glove box assembly, and they suit repair shops handling a single-part job on a right passenger side glove box.

How to Use / Care

1. Use it as the replacement cover on the right passenger side glove box lock latch handle.

How to Choose

Start with the vehicle and the side. This cover is for the right passenger side of the VW Golf 6 and Jetta MK5.

Frequently Asked Questions

Which vehicles does it fit?
It fits the VW Golf 6 and Jetta MK5, and it covers the right passenger side glove box handle position.

What is it made of?
It is made of ABS plastic.

What part number does it match?
It matches interchange part number 1K1857077B.

What do I get in the pack?
The pack has one piece: a glove box latch handle switch cover.

What color is it?
It is black and brand new, with a 1 year manufacturer warranty.

Key Features

• ABS Plastic Build — This glove box handle lock is made from ABS, a plastic material.
• Honda Accord Fitment — It is listed for Honda Accord 2015, 2016, 2017 and 2018 models and is described as suitable for the 9th generation Accord.

Product Specifications

• Material: ABS
• Vehicle Fitment: Honda Accord 2015, 2016, 2017, 2018

What It Is / How It Works

This glove box handle lock is an interior car part that sits on the glove box lid and works with a lock mechanism to hold the lid closed. The housing is ABS plastic, the same material used for many interior trim pieces. Glove box handles are usually replaced when the handle breaks, loosens, or stops engaging the latch, so a replacement part of this type is a common repair item for owners of the listed vehicles.

Who It's For / Use Cases

Glove box handle locks suit car owners and independent repair shops that need to replace a worn, cracked, or stuck glove box handle. They also suit DIY drivers who want to restore a working glove box latch on a compatible vehicle and prefer to match the part to the year and model listed before ordering.

How to Use / Care

1. Use it as a glove box handle lock for Honda Accord 2015–2018 models.

How to Choose

Start with the vehicle. Confirm the year and model of your car against the Vehicle Fitment row in Product Specifications before buying. Next, compare the Model Name in Product Specifications with the part number on the handle you are replacing. Glove box handle locks are generally chosen by fit and mounting style, so matching the vehicle and the existing part number is the main selection step.

Frequently Asked Questions

Which vehicles is this glove box handle lock listed for?
It is listed for Honda Accord 2015, 2016, 2017 and 2018 models, and it is described as suitable for the 9th generation Accord. Check your year and model against the Vehicle Fitment row in Product Specifications.

What material is the handle made from?
The handle is made from ABS plastic, which is the material stated for this item. Its plastic build is listed in Product Specifications under Material.

Will the color look exactly like the photos?
Photo lighting can make the real color look slightly different from the picture. Expect a small color difference between the photo and the part you receive.

What model name is listed for this part?
The Model Name listed for this part is 77545-T2F-A01. Compare it with the part number on your existing handle before ordering.

Key Features

• Hoodie Fabric Build — It is made from actual hoodie fabric and is handmade for the gear shift knob.
• Fleece and Cotton Materials — It is made from fleece, cotton, thread and polyester, which keeps the knob warm on chilly days.
• Summer Heat Shield — In summer it can help protect the knob from the hot sun, so the knob is less hot to the touch.
• Manual and Automatic Fit — It fits manual and automatic gear shift levers.

Product Specifications

• Material: Fleece, cotton, thread and polyester
• Fits: Manual and automatic gear shift levers
• Use: Winter and summer months
• Care: Wash with your normal clothes

What It Is / How It Works

Hoodie-style gear shift covers are fabric accessories that sit over the shift knob and add texture and color to a car interior.

This hoodie cover is made from actual hoodie fabric and is handmade.

Who It's For / Use Cases

Hoodie-style shifter covers suit drivers who like a soft, textured touch on the gear lever. They suit owners who want a playful look in the cabin and who drive either a manual or an automatic car.

How to Wear / Care

1. Use it in both winter and summer months.
2. Wash it with your normal clothes when it needs cleaning.
3. It can be washed with your normal clothes, making it a low-maintenance accessory for your car

How to Choose

Choose a cover that matches your shifter type. It fits manual and automatic gear shift levers, so check that your car's shifter is one of those two types before ordering.

If you drive in both hot and cold months, the cover suits year-round use.

Frequently Asked Questions

What does it fit?
It fits manual and automatic gear shift levers.

What is it made of?
It is made from fleece, cotton, thread and polyester.

Can I wash it?
It can be washed with your normal clothes, so it needs little upkeep.

Does it help in summer?
In summer it can help protect the knob from the hot sun, so the knob is less hot to the touch.

Is it made from real hoodie fabric?
It is made from actual hoodie fabric and is handmade.

Is it only for looks?
It has a practical side too: the fleece and cotton keep the knob warm on chilly days.

Key Features

• Plastic Build — It is made of plastic, so it is light enough for a young child to hold.
• Ride On Play — It is designed for ride-on play, so a child can pretend to steer.

Product Specifications

• Piece Count: 1 pc
• Age Range: 3-6Y
• Material: Plastic

What It Is / How It Works

This is a 1 pc steering wheel toy made of plastic. Steering wheel toys are pretend-play toys that let young children act out driving a car, which is a common role-play activity for this age group.

Who It's For / Use Cases

Steering wheel toys suit young children who enjoy pretend driving and role play. They are a practical gift choice for Easter, New Year's Day and Spring Festival gifting, since the play is simple and hands-on for a child.

How to Use / Care

1. Use it for pretend driving and steering play.

How to Choose

Choose a steering wheel toy by the age range, which is 3-6Y, so it matches the child's age. Check the piece count of 1 pc to see what the pack includes before you buy. Plastic is the material, so the toy suits everyday play indoors and out.

Frequently Asked Questions

What age range is it for?
The age range is 3-6Y, so it suits children in that range.

What is it made of?
It is made of plastic.

How many pieces are in the pack?
The pack has 1 piece.

Is it a holiday gift option?
It is a gift option for Easter, New Year's Day and Spring Festival, and it suits a child who enjoys pretend driving and role play.

Key Features

• Steel Core Build — The high-strength steel core resists cutting, sawing and prying attempts.
• Steering Wheel Restraint — It restricts steering wheel rotation and secures the belt socket.
• Adjustable Length — It measures 72 cm (28.35 inches) and adjusts to fit different steering wheel sizes.
• Built-In Window Tip — A built-in window-breaking tip allows a quick exit in an emergency.

Product Specifications

• Length: 72 cm (28.35 inches)
• Core: High-strength steel
• Coating: PVC rubber
• Sleeve: Oxford
• Vehicle type: Cars, SUVs, pickups, vans and trucks

What It Is / How It Works

This steering wheel lock is a steel cable security device. It wraps around the steering wheel and locks in place with an integrated locking mechanism, adding a visible deterrent inside the vehicle.

Who It's For / Use Cases

Steering wheel locks suit drivers who park in busy areas, leave a vehicle parked for long periods, or make road trips. They are also a practical choice for owners who want an extra mechanical barrier on top of the factory ignition and door locks, especially in shared or outdoor parking.

How to Use / Care

1. Wrap the lock around the steering wheel.
2. Secure it with the integrated locking mechanism.
3. If the lock is too short for the wheel, adjust the seat position first.
4. Use it for daily driving, long-term parking and road trips.

How to Choose

Choose a steering wheel lock by checking that its length suits your steering wheel and vehicle type. It is 72 cm (28.35 inches) long and is designed for cars, SUVs, pickups, vans and trucks.

Steel cable locks differ in core construction and coating, so compare the material details and pick the option whose build suits how and where you park.

Frequently Asked Questions

What is the lock made of?
It has a high-strength steel core, a PVC rubber coating and an Oxford sleeve that shields the lock from scratches.

How long is it?
It is 72 cm (28.35 inches) long and has an adjustable length for different steering wheel sizes.

Which vehicles is it designed for?
It is designed for cars, SUVs, pickups, vans and trucks.

How does it deter theft?
It restricts steering wheel rotation and secures the belt socket, so the wheel cannot be turned freely.

Does it include an emergency tool?
It has a built-in window-breaking tip for a quick exit in an emergency.

Key Features

• Plastic Construction — The strip is made of plastic, so it is a lightweight decorative trim piece for interior panels.
• Color Options — Red, blue, gold and purple color options let you match or contrast with your existing interior trim.

Product Specifications

• Material: Plastic
• Color: Red, Blue, Gold, Purple

What It Is / How It Works

Car moulding decoration flexible strips are thin decorative trim pieces used on vehicle interiors, such as dashboard and door edge areas, to finish edges and add a visual accent. This strip is made of plastic.

Who It's For / Use Cases

Interior trim strips suit drivers who want a decorative accent on the dashboard, door panels or trim edges without larger modifications. They are a simple way to refresh the look of a cabin.

How to Use / Care

1. Use the strip to decorate interior trim areas such as the dashboard and door edges.

How to Choose

Start by measuring the trim area you plan to cover, then pick the length option that covers it. Choose a color that either matches your current interior trim or contrasts with it, depending on the look you want. Plastic trim strips are a common choice for general interior decoration, so compare the color and length options before you decide.

Frequently Asked Questions

What is this product made of?
It is made of plastic, which makes it a lightweight decorative trim strip for interior panels.

What colors are available?
Color options include red, blue, gold and purple, so you can match the strip to your interior or pick a contrasting accent.

Where is it used?
It is designed for interior decoration of areas such as the dashboard and door edges, where a decorative strip can finish a panel edge.

How do I pick the right length?
Measure the trim area first, then choose the length option that covers it with a small margin for fitting.

Key Features

• Solar-Powered Operation — Solar panels capture sunlight or interior vehicle light and convert it into electricity to drive an internal fan, which reduces the need for frequent battery replacements.
• Moving Wing Design — The solar aircraft styling has rotating or flapping wings that add a playful element to the cabin or desk.
• Eco-Friendly Materials — It is made from eco-friendly materials and is safe for use around children and the environment.

Product Specifications

• Material: Eco-friendly materials
• Power source: Solar panels
• Age Range: 18+,14+y,6-12Y
• Essential oils: Not contained in this product

What It Is / How It Works

This solar aircraft ornament is a decorative piece styled as a solar-powered airplane. It is designed for a car interior or a desk, and its solar panels power an internal fan.

Who It's For / Use Cases

Decorative ornaments like this suit car enthusiasts who want a distinctive piece for a dashboard or console. They also suit people who like playful desk decor and want a small display item that adds character to a workspace or shelf.

How to Use / Care

1. Place the ornament where sunlight or interior vehicle light reaches the solar panels, so the internal fan can run.
2. Use it around children and in the environment, since it is made from eco-friendly materials.
3. Set it on a car dashboard or desk as a display piece.

How to Choose

Choose this type of ornament by where you plan to display it, such as a car interior or a desk. Check the Age Range row in the specifications before giving it to a child. If you want a scent, note that the product does not contain essential oils.

Frequently Asked Questions

Does it need batteries?
It is solar-powered. Its solar panels capture sunlight or interior vehicle light, so it reduces the need for frequent battery replacements.

Does it contain essential oils?
No. Due to transportation issues, the product does not contain essential oils.

Is it safe for children?
It is made from eco-friendly materials and is safe for use around children and the environment. The age range is 18+, 14+y, 6-12Y.

Can it be used on a desk?
It serves as a desktop decoration as well as a car interior accessory, with a solar aircraft design.

Who is it a gift for?
It suits car enthusiasts, women, men, or anyone who appreciates distinctive and innovative designs.

Key Features

• Rivet Rust Protection — The applied coating can help keep the rivets from rusting.
• Roof Lining Fixing — It is used to decorate the upper part of the car interior and fix the roof lining.
• Simple Fitting — Fitting needs little time and no professional tools.
• Multi-Vehicle Use — It can be used on cars, trucks, motorcycles, buses, trains, planes and caravans.

Product Specifications

• Material: Fabric, Metal
• Size: Buckle diameter about 20 mm

What It Is / How It Works

This car ceiling fabric fixing clip is a roof lining buckle for car interiors. Roof lining clips are used to hold fabric panels against the ceiling and to repair sagging or dropped headliner fabric. It is used to decorate the upper part of the car interior and fix the roof lining.

Who It's For / Use Cases

Car owners and installers who need to refit a drooping roof lining suit this kind of fixing clip. It also fits people who repair interior trim in cars, trucks, motorcycles or other vehicles where a fabric ceiling needs a secure fixing point.

How to Use / Care

1. Use it to decorate the upper part of the car interior and fix the roof lining.
2. Fit it with the screws and tighten them so it stays firmly in place.
3. Use it on cars, trucks, motorcycles, buses, trains, planes or caravans.

How to Choose

Choose a fixing clip by checking the buckle size against the mounting holes in your roof lining before you buy. The buckle diameter is about 20 mm. Match the vehicle type to where the clip will be used, whether that is a car, bus, caravan or other vehicle with a fabric ceiling.

Frequently Asked Questions

What is the buckle size?
The buckle diameter is about 20 mm.

What is it made of?
It is made of fabric and metal. The applied coating can help keep the rivets from rusting.

Which vehicles can it be used on?
It can be used on cars, trucks, motorcycles, buses, trains, planes and caravans.

Does it stay in place once fitted?
Once the screws are tightened, it stays firmly in place without falling off.

Is it difficult to fit?
Fitting does not take much time and needs no professional tools.

Key Features

• Double-Sided Tape Mounting — One end of the double-sided tape sticks to the back of the product, and the other end is torn off to attach it where you need it.

Product Specifications

• Piece Count: 1 pc
• Material: Leather
• Mounting: Double-sided tape

What It Is / How It Works

This car leg rest pad is made of leather. Car leg rest pads are interior accessories that give the leg or knee a padded surface to rest on while seated in a vehicle.

Who It's For / Use Cases

Car leg rest pads suit drivers and passengers who want a padded spot to rest a knee or leg while seated. Buyers who plan to stick the pad to a fixed surface will find the mounting details in the Specifications section useful when deciding where to place it.

How to Use / Care

1. Tear off one end of the double-sided tape.
2. Stick the torn end of the double-sided tape to the back of the product.
3. After tearing off the other end, install the product at the position you need.

How to Choose

Choose a pad whose listed dimensions fit the space where it will sit, using the Dimensions row in Specifications. The listed material is leather, so check the Material row if that suits your interior. Before you press the pad down, confirm that the spot you pick is clean and fits the pad.

Frequently Asked Questions

What is the product made of?
It is made of leather, and the Material row lists leather only.

How many pieces are in one pack?
One piece per pack.

How is the product attached?
One end of the double-sided tape is stuck to the back of the product. Tear off the other end once you have the position you need, then install the product there.

Key Features

• Decorative Function — It serves a decorative function, so it can add a finished look to the car interior.
• Aromatherapy Wax Form — Its fragrant object form is aromatherapy wax, a solid scent format that suits small spaces.
• Scented Fragrance — It is scented, so it adds a fragrance to the vehicle cabin.

Product Specifications

• Fragrant Object Form: Aromatherapy wax

What It Is / How It Works

This car air freshener is scented and takes the form of aromatherapy wax, so it fits the car interior as a fragrance accessory.

Car air fresheners are scent products made to give a vehicle cabin a pleasant fragrance. The category covers several forms, including hanging cards, vent clips, gels and wax pieces, and each form places the scent in a different spot in the car.

Who It's For / Use Cases

Car air fresheners are commonly chosen by drivers who want a light scent in the cabin during daily trips. They also suit car owners who enjoy personalising a vehicle interior with a small decorative piece.

How to Use / Care

1. Use it to freshen the air inside a car.

How to Choose

When choosing a car air freshener, start with the form you prefer, such as a wax piece, a clip or a card, and think about where you plan to place it in the car. Next, consider the scent strength you want. A milder fragrance suits a shared cabin, while a stronger scent may suit a driver who prefers a noticeable smell. Check Product Specifications for the form and scent details of this item before you decide.

Frequently Asked Questions

Is this air freshener scented?
Yes. It is scented, and its fragrant object form is aromatherapy wax.

What form does the fragrance come in?
It takes the form of aromatherapy wax, shown in Product Specifications under Fragrant Object Form.

Does it need a battery or power source?
No. It is not an electric product, and it has no wireless function.

Does it have an auto shutoff?
No. It has no auto shutoff feature.

Is it decorative as well as scented?
It has a decorative function, and it is scented.

Key Features

• Quilted Leather Top — The quilted leather surface gives the armrest soft, supportive padding.
• Waterproof Leather Surface — The leather is waterproof and wear-resistant, and a wipe cleans it.
• Cup and Phone Slots — A cup holder and a phone holder on top keep drinks and your device within easy reach.
• Side Storage Pockets — A card slot and a large pouch hold toll cards, tissues, change and other small essentials.

Product Specifications

• Product size: 35 * 19 * 7.5
• Material: Leather with a quilted surface
• Fit: Most car center armrests
• Installation: Slips over the existing armrest with no tools required

What It Is / How It Works

A car armrest cushion cover is a padded sleeve that goes over the top of a center console armrest. In this category, covers give the armrest a soft, finished top surface and a tidier look inside the car.

Who It's For / Use Cases

Armrest cushion covers suit drivers who spend long periods at the wheel and want a softer, easy-to-wipe surface on the center armrest. They also suit owners who prefer a cover that goes over an existing armrest without tools.

How to Use / Care

1. Slip the cover over your existing armrest.
2. Clean the leather surface with a wipe when it needs cleaning.
3. Use it on the center armrest to support your arms on long drives.

How to Choose

Start with the armrest your car already has. Compare its length, width and height with the dimensions in Product Specifications before buying. Choose a cover whose top surface suits how you use the armrest, such as padding for long drives or a surface that wipes clean for everyday use.

Frequently Asked Questions

What size is the cover?
The listed dimensions are 35 * 19 * 7.5, as shown in Product Specifications.

What is the cover made of?
The top is quilted leather. The leather is waterproof and wear-resistant.

Does it need tools to install?
No tools are needed. It is designed to slip over your existing armrest and installs in seconds.

Does it have storage?
It has a cup holder and a phone holder on top. The side pockets include a card slot and a large pouch for toll cards, tissues and change.

Which armrests does it fit?
It is designed to fit most car center armrests. Compare the listed size with your armrest before ordering.

Key Features

• Compact Size — It measures 8.9 × 5.6 × 7 cm (3.5 × 2.2 × 2.76 in), a small body that fits a car interior.
• Measured Weight — It weighs 90 g (3.2 oz).
• Rear-Facing View — It faces the rear, so the driver can watch the back seat area from the front seat.
• Piece Count — It is sold as 1/2 PCS.

Product Specifications

• Piece Count: 1/2 PCS
• Weight: 90 g (3.2 oz)
• Size: 8.9 × 5.6 × 7 cm (3.5 × 2.2 × 2.76 in)

What It Is / How It Works

This car baby mirror is an interior mirror that hangs in the car so the driver can keep an eye on the back seat. It is a small rear-view accessory made for watching a child seated behind the driver.

Who It's For / Use Cases

Interior mirrors like this suit parents and caregivers who drive with infants or young children in a rear-facing or back seat. They suit drivers who want a view of the back seat without turning around while the car is moving.

How to Use / Care

1. Use it to watch the child in the back seat from the driver's seat.

How to Choose

Start with the space you have in the car interior. The mirror measures 8.9 × 5.6 × 7 cm, so confirm there is room on the windshield or headrest area where the driver can see the back seat. Its 90 g weight is the other axis to consider when choosing a mount point.

Frequently Asked Questions

What size is the mirror?
It measures 8.9 × 5.6 × 7 cm (3.5 × 2.2 × 2.76 in).

How much does it weigh?
It weighs 90 g (3.2 oz).

Which way does it face?
It faces the rear, so the driver can see the back seat area from the front seat.

How many pieces come in one sale unit?
It is sold as 1/2 PCS.

Key Features

• Shatterproof Acrylic — The mirror is made of shatterproof acrylic with a wide-angle view that shows the rear-facing seat.
• Single Piece Pack — One piece per pack.

Product Specifications

• Piece Count: 1pc
• Material: Acrylic
• Designed For: Unisex
• Mounting: Headrest of most car seats

What It Is / How It Works

This baby car mirror is a rearview mirror made to help a driver see a rear-facing infant. It is a clear, wide-angle mirror that mounts on a car seat headrest.

Who It's For / Use Cases

Rearview mirrors for car seats suit parents and caregivers who drive with a rear-facing infant and want a view of the back seat from the front. Because the design is unisex, it suits any driver or caregiver in that role.

How to Use / Care

1. Attach the mirror to the headrest of most car seats.
2. Angle the mirror so the rear-facing infant seat is in view from the driver seat.

How to Choose

When choosing a rearview mirror for a car seat, check that it is designed for the headrest on your seat, since headrest shapes differ between car seat styles. Look for a wide-angle view if you want to see more of the back seat at once. A clear, shatterproof surface suits everyday driving with a child in the back.

Frequently Asked Questions

What is the mirror made of?
It is made of shatterproof acrylic with a wide-angle view.

Where does it mount?
It installs on the headrest of most car seats.

Who is it designed for?
It is designed for unisex use, so any driver or caregiver watching a rear-facing infant can use it.