Key Features

• 17mm Ball Joint Fit — It plugs directly into an existing base that supports 17mm ball joints.
• 360° Adjustable Angles — It offers 360° adjustable angles, so you can set the phone right in front of your eyes.
• Viewing and Navigation Use — It can hold the phone for watching shows or following navigation while driving.

Product Specifications

• Dimensions: 17 mm (0.67 in)

What It Is / How It Works

This car phone holder extension rod is an accessory that extends a phone holder so the phone sits higher and closer to the driver's line of sight. It uses a double-joint design with 17mm ball joints to connect to an existing holder base.

Who It's For / Use Cases

Phone holder extension rods suit drivers who already have a car phone holder base and want the phone positioned higher or closer to eye level. They also suit people who use a phone for navigation or video while the car is parked, where a steady, adjustable mount is useful.

How to Use / Care

1. Attach the rod to an existing phone holder base that supports 17mm ball joints.
2. Adjust the double joints to set the angle, so the phone sits where you can see it without tilting your head down.
3. Set the rod to the height and angle you need for navigation or viewing before you drive.

How to Choose

Match the ball joint size of your existing holder base to the 17mm size given in Specifications. Consider how far you need the phone to sit from the base and how much angle adjustment you want. Choose a rod that keeps the phone in view while you drive.

Frequently Asked Questions

What ball joint size does it fit?
It supports 17mm ball joints and plugs directly into an existing base.

Does it adjust to different angles?
It has double joints for angle adjustment and 360° adjustable angles, so the phone can be set in front of your eyes.

What can I use it for?
It can hold the phone for watching shows or following navigation while driving.

Who is the brand?
The brand is HOMEFISH.

Is the rod extendable?
Yes, it is an extendable extension rod that lets you raise the phone closer to eye level.

Key Features

• Adjustable Angle — It is adjustable, so the tablet can be set at the angle you prefer.
• Foldable Design — It is foldable, so it can be collapsed when not in use.

Product Specifications

• Color: Black

What It Is / How It Works

This car tablet holder is a dashboard mount that keeps a tablet in view inside a vehicle. Car tablet mounts in this category are usually built around a base, an arm and a cradle that holds the device.

Who It's For / Use Cases

Car tablet holders suit drivers and passengers who want a tablet held in a fixed, visible spot on the dashboard. They are a practical choice for people who use a tablet for navigation, reading or video calls while the vehicle is parked, and who want the device kept steady instead of resting on a seat or the console.

How to Use / Care

1. Use it to hold a tablet on the dashboard of a car.

How to Choose

Check the tablet size range listed in the specifications against your device before buying. Choose a holder whose adjustment suits how you want to view the screen. If you want a holder that takes less space when stored, a foldable design is the selection axis to look at.

Frequently Asked Questions

What is this holder used for?
It is a car tablet holder that mounts on the dashboard to hold a tablet inside the vehicle.

Can the angle be changed?
Yes, it is adjustable, so the tablet can be set at the angle you prefer for viewing.

Does it fold?
It is foldable, so it can be collapsed when not in use.

Which tablet sizes does it fit?
The supported tablet size range is listed in the specifications, so check it against your device before buying.

What color is it?
It is black.

Key Features

• Multi-Function Hook — Besides holding a phone, the holder can hang from the back seat hook to carry shopping bags, clothes, and other items, which helps keep the car tidy.
• Rotating Mount — The phone stand rotates 360° so the screen can be turned to different angles.
• Adjustable Arm — An adjustable expansion arm and fixing clip are designed to fit various phone sizes and models without damaging the phone or interior decoration.
• Tool-Free Installation — It installs without tools to the car air conditioning outlet, or the suction cup fixes to the windshield, and the bracket can be moved or adjusted.
• Four-Piece Set — The set has a piece count of 4 pc.

Product Specifications

• Color: Black
• Piece Count: 4 pc
• Material: Plastic Fiber, ABS
• Size: 10.6 × 9.3 × 4.5 cm (4.2 × 3.66 × 1.77 in)

What It Is / How It Works

This car phone holder with a back-seat hook is a multi-function accessory for vehicle interiors. Car seat back hooks of this type hold a phone in place and also give a hanging point for bags and clothes, so the phone and small items can be kept within reach.

Who It's For / Use Cases

Car phone holders with seat-back hooks suit drivers and passengers who want a phone kept in view and a spot to hang light bags or clothes from the seat. They also suit people who prefer a mount that installs without tools and can be moved to a new position when the seat or dashboard layout changes.

How to Use / Care

1. Choose a mounting point: attach the bracket to the car air conditioning outlet, or use the suction cup on the windshield.
2. Install without tools by fixing the suction cup to the windshield or fitting the bracket onto the air conditioning outlet.
3. Move or adjust the bracket to change the holder's position as needed.
4. Adjust the expansion arm and fixing clip to fit your phone, then hang shopping bags or clothes from the back seat hook when needed.

How to Choose

Start with the piece count: compare the 4 pc set with how many mounting spots you want to use in the car. If you need a phone holder that fits several phone sizes, the adjustable arm and clip are the feature to look at.

Frequently Asked Questions

How many pieces come in the set?
The set is 4 pc, and the color is Black.

What is the holder made from?
The listed materials are plastic fiber and ABS.

How big is one unit?
Overall size is 10.6 × 9.3 × 4.5 cm (4.2 × 3.66 × 1.77 in). Measurements are taken by hand, so allow a 0.1–0.2 cm difference.

Will it fit different phones?
The adjustable expansion arm and fixing clip are made to adapt to various phone sizes and models, and they will not damage the phone or interior decoration.

Can I hang bags on it?
Yes. The hook on the back seat can carry shopping bags, clothes, and other items to help keep the car clean.

Key Features

• Magnetic Hold — The mount is magnetic, so a phone with a metal plate or magnetic case sits against it.

Product Specifications

• Material: Plastic

What It Is / How It Works

Magnetic car phone mounts are small holders that keep a smartphone in view. They use magnets to hold the phone in place on a flat surface, so the phone can be seen and reached without being held in the hand.

Who It's For / Use Cases

Magnetic phone mounts suit drivers who want a phone in view on the dashboard, and people who want a phone propped up at a desk or on a fridge door while they follow directions, watch a video or make a call.

How to Use / Care

1. Use it to hold a smartphone on a dashboard, fridge or desk.

How to Choose

Choose a magnetic mount by the surface you plan to use it on, such as a dashboard, fridge door or desk. Magnets only hold a phone that has a metal plate or a magnetic case, so check your phone's back before you buy. A flat, clean area gives the magnets the most contact with the phone.

Frequently Asked Questions

What is the mount made of?
It is made of plastic and uses magnets to hold a phone.

Does my phone need anything to stick to it?
The magnets grip a metal plate or a magnetic case on the phone. A phone without either will not hold to the mount.

Where can I use it?
This product is designed for specific models listed under Product Specifications → Compatible models. Confirm your exact model appears there before buying.

Does it charge the phone?
No. It is a holder only, and it is not a charger.

Key Features

• 360-Degree Rotation — The holder rotates freely through 360 degrees, so you can angle the phone to the view you need.
• One-Hand Adjustment — You can adjust the phone with one hand, and it switches between horizontal and vertical screen views.
• Adjustable Arm — The arm length adjusts from 0 to 2 inches for a custom fit.

Product Specifications

• Color: Black
• Material: ABS
• Placement: Rear view mirror
• Smartphone size: 4-7 inches
• Arm length: 0-2 inches

What It Is / How It Works

This car phone holder mounts on the rearview mirror and holds a smartphone in view while you drive. It is a clamp-style mount with a rotating head and an adjustable arm.

Who It's For / Use Cases

Car phone holders like this suit drivers and passengers who want a phone visible at eye level for navigation. They also suit people who record drives or use a phone for video calls from the car, since the holder can be turned to the angle they need. Because the mount sits on the mirror, it keeps the phone off the lap and dashboard.

How to Use / Care

1. Use it for navigation.
2. Mount it on the rearview mirror, which is the placement the product is made for.

How to Choose

Start with your phone size. Next, look at the arm length, since it adjusts from 0 to 2 inches. A holder with a rotating head makes it easier to find the angle you want while driving. Choose the material and color based on the look you want for your car interior.

Frequently Asked Questions

What is the holder made of?
It is made of ABS.

Does the phone holder rotate?
It rotates freely through 360 degrees, so you can set the phone at any angle.

Where does the holder mount?
It mounts on the rearview mirror, which is its placement.

How far does the arm adjust?
The arm length adjusts from 0 to 2 inches, so the phone can sit at a custom distance.

Key Features

• Anti-Slip Grip — Anti-slip pads and an anti-scratch claw hold the phone firmly, and the design leaves the data cable charging port free.
• Spiral Hook Clip — A spiral hook clip grips the air vent so the phone stays steady and does not shake or fall.
• Triangular Force Design — The triangular force design keeps the phone locked in place during sudden braking, turning and on bumpy roads.
• 360-Degree Rotation — The rotating ball joint turns the phone to a comfortable viewing angle and can be adjusted with one hand.

Product Specifications

• Material: ABS
• Color: Black
• Phone size range: 4.70-7.01 inch
• Mounting: Car air outlet (air vent)
• Included: 1 car phone mount

What It Is / How It Works

This car phone holder clips onto a car air vent and holds a phone at a set viewing angle. It is a mount for keeping a phone in view and steady while the vehicle is in use, so the screen can be seen without holding the phone.

Who It's For / Use Cases

Car phone holders suit drivers and passengers who want a phone in view for navigation or calls without holding it. They also suit people who use different phone models within a common size range and want one mount that adjusts by hand to the angle they prefer.

How to Use / Care

1. Clip the holder onto the car air outlet, where it does not block your line of sight during use.
2. Turn the 360-degree ball joint by hand to set the viewing angle.
3. Use it with phones in the 4.70-7.01 inch size range.

How to Choose

Start with phone size, because the mount is made for a stated size range. Confirm the phone falls within that range before buying. Next, look at where the mount clips, since the air outlet must be free so the holder does not block your view. A mount with a ball joint suits people who change the viewing angle often, while a fixed mount suits those who keep one position.

Frequently Asked Questions

What phone sizes does it fit?
It is made for phones in the 4.70-7.01 inch size range.

What is it made of?
It is made of ABS and comes in black.

Where does it attach in the car?
It mounts at the car air outlet and is positioned so it does not block the line of sight during use.

Does it include a charger?
It does not include a charger. The package has one car phone mount.

How is the viewing angle adjusted?
The 360-degree rotating ball joint can be adjusted with one hand to set the viewing angle.

Key Features

• Magnetic Surface Holds — The magnetic surface holds a smartphone in place on the holder.

Product Specifications

• Material: Plastic

What It Is / How It Works

This magnetic phone holder is a small plastic mount that uses magnets to hold a smartphone steady on a flat surface.

Who It's For / Use Cases

Magnetic phone holders like this suit drivers who want a hands-free spot for a smartphone in a car, and people who need a steady place to set a phone on a desk or fridge while they work or follow directions.

How to Use / Care

1. Use it to hold a smartphone on a dashboard, desk, or fridge.

How to Choose

Choose a magnetic phone holder by where you plan to use it. A dashboard, desk, and fridge each have a different surface, so pick a spot that is flat enough for the holder to sit level and that keeps the phone within easy reach.

Frequently Asked Questions

Where can I use it?
It can hold a smartphone on a dashboard, desk, or fridge. Set it on a flat, smooth spot in one of those areas to keep the phone upright.

What is it made of?
It is made of plastic.

How does it hold the phone?
It uses magnets to hold the smartphone in place on the holder.

Does it include a charger or a speaker?
It is a holder only. It has no charger and no speaker.

Key Features

• Retractable Metal Hook — The retractable metal hook helps the phone holder stay in place on the air vent.
• 17mm Standard Joint — The joint ball is 17mm in diameter, a standard size that fits most car phone holders and wireless car charger mounts.
• 360-Degree Adjustment — The joint turns 360 degrees for free adjustment, so the phone can be angled while driving.
• Extendable Hook Length — The hook extends further to fit more vent sizes and sits lower for easier fitting and removal.

Product Specifications

• Color: Black
• Hook material: Metal
• Joint ball diameter: 17mm
• Mounting point: Car air outlet vent

What It Is / How It Works

This car air vent clip for phone holders attaches a phone holder or wireless charger mount to a car's air outlet vent. It has a 17mm joint ball and a retractable metal hook.

Who It's For / Use Cases

Air vent clips for phone holders suit drivers who want a phone held in view for navigation or calls while driving. They also suit people who would rather not fix a mount to the dashboard or cup holder and prefer a clip that attaches to the vent instead.

How to Use / Care

1. Extend the retractable metal hook until it fits the car air outlet vent.
2. Hook the clip onto the air outlet vent so the hook holds the base in place.
3. Attach your phone holder or wireless charger mount to the 17mm joint ball.
4. Turn the joint ball to set the angle of the phone.

How to Choose

Start with the joint on your phone holder or charger mount. The 17mm joint ball is the connection point, so confirm your mount uses a 17mm joint before buying. A clip with a 360-degree joint suits anyone who wants to change the screen angle often.

Frequently Asked Questions

Will it fit my phone holder?
The joint ball is 17mm in diameter, a standard size that fits most car phone holders and wireless car charger mounts. Match your holder's joint to 17mm before ordering.

Does the hook fit different vents?
The hook extends further than before to fit more vent sizes, and its lower height makes it easier to put on and take off.

What material is the hook?
The hook is metal and retractable. It is designed to keep the phone holder in place on the vent.

What color is it?
It is black, with a metal hook and a 17mm joint ball.

Does it include a charger?
No. It is a vent clip for holding a phone holder or mount, not a charger.

Key Features

• Seat Installation — The holder is set up for seat installation.

Product Specifications

• Installation Type: Seat Installation

What It Is / How It Works

A phone holder is a mount that keeps a mobile phone upright and steady so the screen can be viewed hands-free. Holders of this type are used on desks, in vehicles and on dashboards, where a stable position helps while a phone is in view.

Who It's For / Use Cases

Phone holders suit people who want a phone in view while working at a desk, navigating in a car, or using a phone on a dashboard or windshield mount. They are useful for anyone who needs hands-free viewing during short tasks such as following directions, watching a video call or checking messages.

How to Use / Care

1. Use the holder to hold a phone on a desk, in a car, or against a windshield or dashboard, depending on the surface the mount suits.

How to Choose

Start with the surface you plan to use, since a desk, a car windshield and a dashboard each suit different mounting setups. Confirm the holder grips the phone you own before buying.

Frequently Asked Questions

Can the holder be used on a desk?
Yes. A desk gives a stable, upright position for a phone, so the holder can sit on a flat desk surface while the screen stays in view.

Which surfaces can the holder be set up on?
It can be set up on a desk, in a car, or on a windshield or dashboard, depending on which surface suits its mount.

Does the holder come with a charger?
No. The product has no charger, so a phone needs its own charging setup.

How is the holder installed in a vehicle?
The holder is designed for seat installation, which is the installation type this product is set up for.

Key Features

• Universal Compatibility — It is designed as a universal car phone holder, so it is not tied to a single phone model.

Product Specifications

• Compatible With: Universal
• Type: Car Holder

What It Is / How It Works

A car phone holder is a mount that sits inside a vehicle and holds a mobile phone in a fixed position so it stays visible and within reach. Car phone holders are sold in many styles, including dashboard, vent and windshield mounts, and most use an adjustable grip to fit different phone sizes.

Who It's For / Use Cases

Car phone holders suit drivers who want a phone in view for navigation, music or calls without holding it. They also suit passengers who share a vehicle and want a steady place to set a phone during a trip.

How to Use / Care

1. Use it to hold a mobile phone inside a car.

How to Choose

Start by checking the grip range against your phone's width and thickness, especially if you use a case. Adjustable arms and rotating heads give more room to set the angle, which helps when the phone is used in both portrait and landscape.

Frequently Asked Questions

Is a charger included?
No. A charger does not come with this holder, so you will need your own charging cable and power source.

Does the holder have a speaker?
No. It has no built-in speaker, so it only holds the phone in place and does not play sound.

Will it fit my phone?
The holder is marked as universal compatibility, so it is not built for one phone model. Measure your phone's width and thickness and compare them with the grip range before ordering.

What type of product is this?
It is a car holder for a mobile phone. Its type is recorded in the specifications as Car Holder, so it is meant to mount a phone inside a vehicle.

Key Features

• Washable Surface — The silicone part can be taken out and wiped or washed with water.
• Charging Plate Protection — It helps keep the suede of the charging plate from being worn out.
• Debris Control — It helps keep the charging plate and armrest box from filling with messy debris that is hard to clean.
• Non-Slip Wear Resistance — It is designed to resist slipping and wear during use.

Product Specifications

• Material: Silicone
• Color: Gray

What It Is / How It Works

This silicone protect pad is made for the wireless charging plate in a car's center console. It is made of silicone and fits the car's original wireless charging plate, so it protects that plate. Its gray design is low-key and does not change the look of the car's original interior.

Who It's For / Use Cases

Car owners who keep a wireless charging plate in the center console often want a pad that protects the plate surface and keeps the area around it cleaner. Drivers who want an accessory that keeps the interior look unchanged suit this kind of silicone pad.

How to Use / Care

1. Set the pad on the wireless charging plate or armrest box, where its anti-skid performance and wear resistance apply during use.
2. Take the silicone part out and wipe it or wash it with water when it gets dirty.

How to Choose

When choosing a silicone car pad, match it to the wireless charging plate or armrest box you want to cover, so the pad sits flat over that area. Silicone pads of this type are chosen for their non-slip feel and for keeping debris out of hard-to-clean spaces. A gray finish suits interiors where a subtle look is preferred.

Frequently Asked Questions

What is the main job of the pad?
It helps keep the suede of the charging plate from being worn out. It also helps keep the charging plate or armrest box from filling with messy debris that is hard to clean.

What is the pad made of?
It is made of silicone. The silicone part can be taken out and wiped or washed with water.

Does installation need tools?
No tools are required. The installation is simple, and the pad can be easily disassembled.

Will the pad change the look of the car interior?
The pad is gray and low-key, so it does not affect the original style of the car.

Does the pad protect the original charging plate?
It fits the car's original wireless charging plate and protects it, so phone charging on that plate is not interrupted by wear.

Key Features

• Phone Size Range — It is made for mobile devices measuring 4.7-6.7 inches.

Product Specifications

• Material: Plastic

What It Is / How It Works

Car phone holders are mounts that keep a phone steady and in view inside a vehicle. Air vent clip mounts are one common type, attaching to the vent slats so the device sits near eye level for navigation.

This model is sized for mobile devices in the 4.7-6.7 inch range and is made of plastic.

Who It's For / Use Cases

Car phone holders suit drivers who want a phone or GPS unit within view for navigation or calls while the car is stopped or parked. Drivers who use a phone for navigation or music often prefer a vent-mounted holder because it keeps the screen near eye level. Passengers who want to show a route on a phone screen may find this type useful too.

How to Use / Care

1. Use it to hold a smartphone or GPS device in the car.

How to Choose

Start with the size of your device. Choose a holder whose listed size range covers your phone's width, since a phone outside that range may not sit securely. Next, look at the mounting style. A clip mount suits cars with vent slats wide enough to grip. Plastic is a common material for this category.

Frequently Asked Questions

What size phone does it fit?
It is made for mobile devices measuring 4.7-6.7 inches, so check your phone's size before you buy.

What is it made of?
It is made of plastic.

Can it hold a GPS device as well as a phone?
Holders in this category are used for both phones and GPS units, and the same mount can hold either if the device falls within the size range.

Does it fit every car?
No specific car models are named, so check that your air vent has slats the clip can grip.

Key Features

• Dual USB Ports — It has two USB ports and can charge two smartphones or devices at the same time.
• 5V 2.1A Output — The output is DC 5V/2.1A.
• Overheat and Overcharge Protection — An over-heated, over-current and over-charging protection circuit helps guard your phone and tablet from unsteady car voltage while charging.

Product Specifications

• Color: Pink
• Material: Aluminum alloy + Rhinestone
• Input: DC 12-24V
• Output: DC 5V/2.1A
• Size: 2.56 × 2.5 cm (1 × 0.98 in)
• Product Style: Classic
• Package Contents: 1 x USB Car Charger

What It Is / How It Works

This car charger is a compact USB adapter for use in a vehicle. It has two USB ports, an input of DC 12-24V, and it measures 2.56 × 2.5 cm (1 × 0.98 in).

Who It's For / Use Cases

Two-port car chargers suit drivers and passengers who each carry a phone or tablet and want to charge both from one vehicle socket. They also fit anyone who wants a small adapter that takes up little space in the cabin while keeping a USB device powered on the road.

How to Use / Care

1. Use it to charge a smartphone or other USB device from a car's power socket.

How to Choose

Choose a car charger by matching the number of ports to the devices you carry, since this model has two USB ports. Confirm that your vehicle's socket supplies a voltage within the DC 12-24V input range. Look for an output rating that suits your device's charging needs, and this model's output is DC 5V/2.1A.

Frequently Asked Questions

Can it charge two devices at once?
Yes, it has two USB ports and can charge two smartphones or devices at the same time. It works with smartphones and most other USB charging devices.

What output does it provide?
Each USB output is rated DC 5V/2.1A. The input range is DC 12-24V.

What protection does it have?
It has an over-heated, over-current and over-charging protection circuit. This helps protect your phone and tablet from unsteady voltage in the car while charging.

What size is it?
It measures 2.56 × 2.5 cm (1 × 0.98 in). Its simple, compact design keeps it small in the cabin.

What is in the package?
The pack has one USB car charger. It is packed in a bubble bag without a retail box.

Key Features

• 160W Max Output — It has a maximum output power of 160W.
• Multiple Charging Ports — The outputs are USB-A and Type C, with 3 C ports.
• Intelligent Charging — It includes an intelligent charge feature.
• Car Lighter Power — It draws power from the car's lighter slot.

Product Specifications

• Compatible models: iPhone 14–17
• Max. Output Power: 160W
• Output Interface: USB-A, Type C, 3 C Ports
• Power Source: Car Lighter Slot

What It Is / How It Works

This Baseus 160W car charger plugs into a car's lighter slot to charge devices on the road. Car chargers of this type are used to charge phones, tablets and laptops while driving.

Who It's For / Use Cases

Car chargers of this type suit drivers and passengers who want to charge phones, tablets and laptops from a vehicle's lighter socket. They are useful on longer trips, during rideshare driving, and for families who keep several devices charged while traveling by car.

How to Use / Care

1. Use it to charge phones, tablets and laptops in the car.
2. Plug the charger into the car's lighter slot.
3. Connect your device to one of the USB-A or Type C outputs.

How to Choose

When choosing a car charger, start with the number and type of ports you need. Check that the port types match your devices' cables, and consider total output if you plan to charge a laptop alongside a phone. The charging cable is not included, so make sure you have a compatible cable before your trip. Product Specifications lists the output power and port details.

Frequently Asked Questions

What is the maximum output power?
It has a maximum output power of 160W. The outputs are USB-A and Type C, with 3 C ports.

Is a charging cable included?
No. The charging cable is not included, so have a compatible cable ready for your device.

How does it get power in a car?
It plugs into the car's lighter slot to draw power.

Does it use GaN technology?
No. It is not a GaN charger.

Which certifications does it carry?
It carries RoHS, pse, FCC and CE marks.

Which models or devices is this designed for?
This product is designed for specific models listed under Product Specifications → Compatible models. Confirm your exact model appears there before buying.

Key Features

• Three-Port Power Sharing — Three ports share 130W total output, so several devices can charge at once.
• 100W PD Output — The charger provides a 100W PD output for fast charging of compatible USB-C devices.
• Cooling Air Vent — The cooling air vent design helps the charger dissipate heat quickly.
• Wide Car Voltage Range — It supports 12V–24V input and suits most cars, trucks and vans.

Product Specifications

• Total Power: 130W max
• Port Output (USB-C1+USB-C2+USB A): 12W+100W+12W (130W)
• Input: 12-24V
• Output Interface: 2 C Ports, USB-A
• Power Source: Car lighter slot
• Material: PC
• Weight: 48 g (1.7 oz)

What It Is / How It Works

This UGREEN 130W car charger is a vehicle USB charger that plugs into the car lighter slot and provides USB-C and USB-A outputs for phones, tablets and laptops.

Who It's For / Use Cases

Car chargers of this type suit drivers and passengers who want to charge several phones, tablets or laptops on the road. They are often chosen for road trips, commutes and long days in the vehicle when a wall outlet is not within reach.

How to Use / Care

1. Use it to charge phones, tablets and laptops from the car lighter slot.
2. Match each device to a port by checking the output split in Product Specifications.

How to Choose

Start with the total output you need, then look at the number of ports. If you charge a laptop or tablet alongside phones, pick a charger whose higher-output port fits the largest device. For device fitment, see Product Specifications → Compatible models.

Frequently Asked Questions

Can one port deliver the full 130W?
No. The 130W total is shared. One configuration splits it as 12W+100W+12W across USB-C1, USB-C2 and USB-A, and another splits it as 30W+100W across the two USB-C ports.

Does it work in a 12V or 24V vehicle?
Yes. The input is 12-24V, so it supports most cars, trucks and vans.

How does the charger manage heat?
It has a cooling air vent design that helps the charger dissipate heat quickly during charging.

Can you find the charger in the dark?
It has an LED indicator light that helps you find the charging port at night.

Which models or devices is this designed for?
This product is designed for specific models listed under Product Specifications → Compatible models. Confirm your exact model appears there before buying.

Key Features

• Wireless and Magnetic Charging — It charges compatible phones wirelessly, and the magnetic direct charging connector supports up to 66W.
• Infrared Auto-Clamp — A built-in infrared sensor detects when the phone is close, and the clamp arm opens and closes on the phone automatically.
• Night Ambient Lighting — Built-in gentle gradient ambient lighting gives a faint, non-glare light at night.
• Magnesium Aluminum Frame — The frame is made of magnesium aluminum alloy and has a thin, light design.

Product Specifications

• Color: Black, Silver
• Charging power: 66W
• Input voltage: 5V-3A, 9V-1.67A
• Charging distance: 0–6 mm (0–0.24 in)
• Conversion efficiency: about 80%
• Phone size: 5.4–7.2 inches
• Installation Type: Vent installation
• Dimensions: 112.5 × 69 × 45 mm (4.4 × 2.7 × 1.77 in)

What It Is / How It Works

This car phone mount with wireless charger holds a phone in a vehicle and charges it at the same time. It uses a vent installation.

Car phone mounts with a charging feature are built so the phone stays in view and charges during the drive.

Who It's For / Use Cases

Car phone mounts with wireless charging suit drivers who want the phone held in a fixed position while it charges. They suit people who use navigation or calls in the car and want a hands-free setup that keeps the phone in reach.

How to Use / Care

1. Use the included magnetic charging connector for magnetic charging, which supports charging up to 66 watts.
2. Keep the bracket in the car when the car is turned off, since it can continue to be used then.

How to Choose

Start with your phone size: the holder supports phones from 5.4 to 7.2 inches. If you want the 66W option, use the magnetic direct charging connector. Consider the vent installation type if you plan to mount it on an air vent in your car.

Frequently Asked Questions

What phone sizes does it hold?
It supports phones from 5.4 to 7.2 inches and is compatible with Apple and Android devices.

How fast is the charging?
The magnetic direct charging is rated up to 66W. Wireless charging works within a 0–6 mm charging distance.

What comes in the box?
The box has 1 wireless charging mount, 1 USB Type-C charging cable, 2 magnetic charging connectors (Type-C/Micro), and 1 hook clamp.

Can I keep using the holder when the car is off?
The bracket can continue to be used even if the car is turned off.

How does the clamp open?
A built-in infrared sensor detects when the phone is close, and the clamp arm opens and clamps the phone automatically.

Key Features

• Charging Indicator — A charging indicator shows the status of the wireless charging while the phone sits on the mount.
• Built-In Holder — The unit has a holder that cradles the phone for use in the car.
• Strong Magnetic Hold — Strong magnets hold the phone in place without sliding while it sits on the charging area.
• One-Handed Mounting — The magnetic mount lets you set the phone in place without stopping to secure it.
• 15W Wireless Charging — Wireless charging reaches up to 15W for iPhone 12-15 series models and also supports 5W, 7.5W and 10W standard wireless charging.

Product Specifications

• Compatible models: iPhone 12–15; Macsfae
• Type: Magnetic car wireless charger
• Compatible With: Apple iPhone 12-15 series
• Connector Type: Type C
• Input Interface: Type-c Input: DC 12V/1.75A 9V/1.67A 5V/2A (Please confirm you used was QC3.0 charger)

What It Is / How It Works

This magnetic car wireless charger is a car mount with a built-in phone holder and wireless charging, designed to sit on the dashboard or center console. It is made for iPhone 12-15 series phones and uses a Type-C input for power.

Who It's For / Use Cases

Drivers who want a phone held in view on the dashboard or center console will find a car mount suits this use. Anyone who prefers placing a phone in a vehicle with one hand may appreciate a magnetic mount. Car mount buyers usually compare how the holder fits their vehicle before ordering.

How to Use / Care

1. Connect the Type-C input to a power source rated DC 12V/1.75A, 9V/1.67A or 5V/2A.
2. Confirm the charger you use is a QC3.0 charger before connecting it.

How to Choose

Start with your phone model, since this product is listed for the iPhone 12-15 series and its wireless charging reaches up to 15W on those models. Check whether you need wireless charging, because this product is offered in an edition with a wireless charger and an edition without one. Consider where you plan to place the mount in the car, such as the dashboard or center console, and choose the version that matches that setup.

Frequently Asked Questions

Which iPhone models does it work with?
It is made for the iPhone 12-15 series and supports up to 15W wireless charging on those models. Check the Compatible With row in Product Specifications for the model range.

What power input does it use?
It uses a Type-C input rated DC 12V/1.75A, 9V/1.67A or 5V/2A. Confirm the charger you use is a QC3.0 charger.

Which certifications does it carry?
It carries RoHS, CE and FCC certification marks, as shown in the Certification row of Product Specifications.

Does it charge wirelessly in every version?
No. The product is offered in an edition with a wireless charger and an edition without one, so choose the version that includes wireless charging if you want that feature.

Key Features

• Automatic Clamps — Two clips close around the phone when it is set in the holder. To release it, touch the top of the bracket and the clips open.
• Adjustable Charging Power — It adjusts charging power among 5W, 7.5W, 10W, 15W, 20W and 30W for wireless fast charging.
• 360-Degree Rotating Cradle — The cradle rotates 360 degrees, so you can set the viewing angle for your phone or GPS while driving.
• Charging Indicator — It has a charging indicator that lets you see when the phone is charging.

Product Specifications

• Connector Type: Type C
• Max. Output Power: 30W
• Charging power: 5W/7.5W/10W/15W/20W/30W
• Working frequency: 110-205KHz
• Charging efficiency: ≥75%
• Screen size range: 4.5 to 6.5 inches
• Color: gold silver

What It Is / How It Works

This car wireless charger mount is a phone holder for an air vent. It holds the phone in place and charges it wirelessly while the phone sits in the cradle, so the phone stays powered on the road.

Who It's For / Use Cases

Car wireless charger mounts suit drivers who want a phone holder that stays put while driving and keeps the phone charging during trips. They also suit people who use GPS on the phone and want to adjust the screen angle for easier viewing from the driver's seat.

How to Use / Care

1. Use a QC 3.0 car charger adapter for fast charging, since that adapter is not included with the mount.
2. Use a QC 2.0 or 3.0 adapter with the included cable for fast charging.
3. Without a QC 3.0 adapter, charging may be intermittent.

How to Choose

Check that your phone's screen falls within 4.5 to 6.5 inches, the range this mount holds.

If you want fast charging, pick up a QC 2.0 or 3.0 car charger adapter, since one is not included.

Choose a mount with a rotating cradle if you need to adjust the screen angle while driving.

Frequently Asked Questions

What screen sizes does it hold?
It holds phones with screens from about 4.5 to 6.5 inches.

Is a charger adapter included?
No. A QC 3.0 car charger adapter is not included. The pack has one car wireless charger and one USB cable.

What charging power does it support?
It adjusts charging power among 5W, 7.5W, 10W, 15W, 20W and 30W, with a maximum output of 30W.

Does the holder rotate?
Yes. The cradle rotates 360 degrees, so you can set the viewing angle for your phone or GPS.

How is the phone held in place?
Two clips close around the phone when it is set in the holder. To release it, touch the top of the bracket and the clips open.

Key Features

• Two-in-One Design — It holds a mobile phone and a water bottle at the same time.
• Elastic Silicone Pads — Four elastic silicone pads hold cups and bottles of most sizes steady, so a cup stays upright on bumpy roads.
• Removable Holder — It can be taken off at any time when it is not in use.
• Cup and Phone Fit — The cup section takes cups under 73mm across, and the phone section takes phones under 97mm wide.

Product Specifications

• Cup diameter: Less than 73mm
• Phone width: Less than 97mm
• Cup grip: Four elastic silicone pads

What It Is / How It Works

This car phone holder pairs a phone holder with a cup holder expander, so a phone and a water bottle can sit in one mount. Car phone holders are built to keep a device and a drink within easy reach while the car is moving.

Who It's For / Use Cases

Car phone holders suit drivers who want a phone and a drink within reach on daily commutes, errands, or long road trips. They fit people who keep a water bottle in the car and want the phone in view while they drive.

How to Use / Care

1. Remove the holder at any time when it is not in use.
2. Place a mobile phone and a water bottle in the holder at the same time, using its two-in-one design.

How to Choose

Choose a holder by matching your phone width and drink container diameter to the limits in Product Specifications. Check the width of your phone with its case on, not only the bare phone. Compare the diameter of your usual bottle with the cup section limit before you buy.

Frequently Asked Questions

How wide a phone does it hold?
The phone section takes phones less than 97mm wide, so measure your phone with its case on before you buy.

What cup sizes fit the cup section?
The cup section takes cups less than 73mm in diameter, and the four elastic silicone pads hold cups and bottles of most sizes steady.

Can the holder be taken out of the car?
It can be removed at any time when not in use, so it does not have to stay in place while the car is parked.

Does it keep a bottle steady on bumpy roads?
The four elastic silicone pads keep the cup from tipping over when the car drives over bumpy roads.

Can it hold a phone and a bottle at once?
Its two-in-one design holds a mobile phone and a water bottle at the same time, so both stay within reach.

Key Features

• Suction Cup Mount — Attaches to the windshield with a suction cup and locks in place.
• TomTom GPS Design — Designed as a suction cup mount holder for TomTom GPS units.
• Ball Socket Fit — Fits securely in the ball socket for TomTom units.
• PC+TPU Construction — Made from PC+TPU material.

Product Specifications

• Color: Black
• Material: PC+TPU

What It Is / How It Works

This car windshield suction cup mount GPS holder is a holder for a navigation unit that attaches to the glass rather than the dashboard. Suction cup windshield mounts of this kind use a cup on the glass and a ball-joint socket so the device can be angled for viewing.

Who It's For / Use Cases

Windshield suction cup GPS holders suit drivers who want a navigation screen at eye level on the glass and who prefer not to mount hardware on the dashboard. They also suit people who move a navigation unit between vehicles, since a suction cup mount can be attached to and released from the glass.

How to Use / Care

1. Use this car windshield suction cup mount GPS holder to hold a TomTom GPS unit on a vehicle windshield.

How to Choose

Choose a windshield suction cup mount when you want the navigation unit held on the glass at eye level. Confirm that your navigation unit is a TomTom model, since this holder is designed for TomTom GPS units. Black PC+TPU construction suits buyers who want a dark, understated finish.

Frequently Asked Questions

What is the holder made from?
It is made from PC+TPU and the color is black.

How does it attach to the vehicle?
It attaches to the windshield with a suction cup and locks in place, and the ball socket holds the navigation unit.

Which navigation unit is it designed for?
It is designed as a suction cup mount holder for TomTom GPS units and fits securely in the ball socket for TomTom.

How many holders are in the package?
The quantity is 1 car mount GPS holder.

Who makes this holder?
The brand is NIGHTKIST.

Key Features

• Wireless Charging Pad — It charges a phone placed on its flat surface without a charging cable between them.

What It Is / How It Works

Wireless chargers are flat charging pads that power a phone through its surface instead of a plug-in cable. Pads of this type are commonly set on desks, nightstands and in vehicles, and they are usually powered from a USB source.

Who It's For / Use Cases

Wireless chargers suit phone owners who want to avoid repeatedly plugging and unplugging a charging cable. They are a practical choice for a desk, bedside table or workspace where a phone is often set down while it charges.

How to Use / Care

1. Use it to charge a mobile phone wirelessly by placing the phone on the charging pad.

How to Choose

Start with the phone you plan to charge and confirm that it supports wireless charging before buying. Check the power connection the pad uses and whether it matches a USB power source you already have. If you plan to charge in a car or on a desk, choose a pad whose size suits the space where it will sit.

Frequently Asked Questions

What kind of product is this?
It is a wireless charger, a flat charging pad for mobile phones. The name also points to USB charging, so the pad is meant to be powered from a USB source.

Who is the brand?
The brand is LINGLUYANG, shown in Product Specifications.

Does it need a charging cable?
A phone charges on the pad without a cable between the phone and the pad. The pad itself is powered from a USB source.

Key Features

• Black Color — The stand is finished in black.
• 4-11 Inch Devices — It is made for mobile phones and tablets in the 4-11 inch size range.
• 288 g Weight — The stand weighs 288 g (10.2 oz).

Product Specifications

• Colour: Black
• Material: ABS
• Intended use: Suitable for 4-11 inch mobile phones and tablets
• Dimensions: 11 in
• Weight: 288 g (10.2 oz)

What It Is / How It Works

A car cup tablet stand is a holder that sits in a vehicle's cup holder and supports a phone or tablet at an upright angle. This black ABS car cup tablet stand is built for mobile phones and tablets in the 4-11 inch size range.

Who It's For / Use Cases

Car cup tablet stands suit drivers and passengers who want a phone or tablet kept in view during a trip. They also suit people who use a phone for navigation or a tablet for video on the road and want a holder that fits a standard cup holder.

How to Use / Care

1. Use it to hold a mobile phone or tablet in a car cup holder.

How to Choose

Start by checking that your device falls within the 4-11 inch size range the stand is made for. Choose a black stand if that color suits your vehicle interior.

Frequently Asked Questions

What size devices is it made for?
It is made for mobile phones and tablets in the 4-11 inch size range.

What is the stand made of?
The stand is made of ABS, which is a plastic material.

What color is it?
It is black.

How much does it weigh?
It weighs 288 g (10.2 oz).

Does it come with a charger?
No, the stand does not come with a charger.

Key Features

• Magnetic Phone Holder — The magnetic phone holder firmly fixes your smartphone so it stays in place while you drive.
• 360° Rotation — The holder rotates 360° horizontally and 180° vertically, so you can angle the phone as needed.
• Adjustable Arm — The adjustable arm fits either side of the monitor and lets you set the phone mounting height.
• Double-Sided Tape Mount — It attaches to the screen with double-sided tape and leaves no residue when you reposition it.

Product Specifications

• Color: Black
• Material: ABS plastic (shell), nylon (swing arm), carbon steel (counterweight block)
• Weight: 354 g (12.5 oz)
• Power: 15W
• Rotation angle: 360° horizontally / 180° vertically
• Applicable devices: Mobile phones that support magnetic suction
• Compatible models: Tesla Scalable Hidden Floating

What It Is / How It Works

This magnetic car phone holder is a mobile phone stand with an adjustable swing arm, made for the screen of a Tesla Model 3 Y. It holds a smartphone in place on the dashboard so the phone and the touch screen can be used together.

Who It's For / Use Cases

Car phone holders like this suit drivers who want their phone within easy reach while they use the dashboard touch screen. They also suit people who want the phone held steady on a flat mounting surface and angled for viewing.

How to Use / Care

1. Use it to hold a phone on the Tesla Model 3 Y screen.
2. Adjust the arm to set the phone mounting height as needed.

How to Choose

Choose a car phone holder by checking that its arm reaches the screen area you plan to use and that the mount suits the size of your phone. Look at the rotation range if you often change the viewing angle, and check the mounting method you prefer before you buy.

Frequently Asked Questions

What is it made of?
It has an ABS plastic shell, a nylon swing arm and a carbon steel counterweight block.

Which phones does it work with?
It is for mobile phones that support magnetic suction.

Can I move the holder without leaving marks?
It mounts with double-sided tape and leaves no residue when you reposition it.

How far does the holder turn?
It rotates 360° horizontally and 180° vertically.

What comes in the box?
One mobile phone holder is included.

How much does it weigh?
It weighs 354 g (12.5 oz).

Key Features

• Fast Wireless Charging — It supports up to 15W fast charging for Qi-enabled smartphones, including iPhone, Samsung, Google Pixel and LG devices.
• Non-Slip Silicone Pad — The silicone pad keeps your phone from sliding while you drive.
• Plug-and-Play Harness — It uses the original factory wiring harness connector, so no cutting or splicing is needed.
• Charging Status Light — The LED shows blue for standby and green while charging.

Product Specifications

• Color: Black
• Material: ABS
• Interchange Part Number: 0001634506
• Connection Method: Wired Connection
• Placement on Vehicle: Inside the car

What It Is / How It Works

This center console wireless charger tray is a replacement armrest tray for the Toyota Tundra. It replaces the original storage tray and adds Qi wireless charging, with its wiring harness and mounting hardware included.

Who It's For / Use Cases

Center console wireless charger trays suit drivers who keep a Qi-enabled phone in the cabin and want to set it down without running a charging cable. They also suit owners who want a tidy armrest area that keeps loose cables out of the console.

How to Use / Care

1. Install the new wireless charging tray into the armrest.
2. Remove any metal objects, credit cards or magnetic mounts from the charging area before use.
3. Connect to the original factory wiring harness connector, with no cutting or splicing needed.

How to Choose

Start with the vehicle. Confirm that your Toyota Tundra falls within the model years this tray is made for before you order. Next, check that your phone supports Qi wireless charging, since the tray charges only Qi-enabled devices. Choose the black finish if it matches your console interior.

Frequently Asked Questions

Which vehicle is it made for?
It is made for the 2014-2021 Toyota Tundra center console. Confirm your model and production year before you order.

Which phones can it charge?
It is for Qi-enabled smartphones and devices. It supports up to 15W fast charging for those devices, including iPhone, Samsung, Google Pixel and LG models.

Are special tools needed to install it?
No special tools are required for installation. Basic hand tools, such as a screwdriver, are sufficient. The kit includes 4 mounting screws and 6 cable ties.

What does the warranty cover?
Auparhig provides a 12-month/12,000-mile warranty. It covers defects in materials and workmanship under normal use and service.

Key Features

• Wrist Strap Design — The wrist strap keeps your camera steady in your hand.
• Palm Support Screw — The palm support is held by a screw, which makes the setting more convenient and accurate.
• 360-Degree Rotation — The armband rotates 360 degrees, and the strap length adjusts for wear on the hand or the wrist.
• Action Camera Compatibility — It works with GoPro, DJI, Insta360, Sjcam and yi action cameras.

Product Specifications

• Compatible with: GoPro, DJI, Insta360, Sjcam, yi; GoPro 13 12 11 10 9
• Material: ABS+Fiber
• Water Resistance Level: Not water resistant
• Package contents: 1 long screw, 1 360 rotating palm stand

What It Is / How It Works

This is a wrist strap mount for action cameras. It attaches a camera to the hand or wrist so the camera stays steady while you hold it. The mount has a 360-degree rotating armband and a palm support that is fixed with a screw.

Who It's For / Use Cases

Action camera users who film handheld often use wrist and hand straps to keep a camera steady. People who shoot while walking, cycling, or moving between angles may find a strap mount useful for holding the camera close and ready.

How to Use / Care

1. Use it to hold a compatible action camera by the hand or wrist while filming.
2. Adjust the strap length so it sits on the hand or wrist, then rotate the armband to the angle you need.

How to Choose

Start with the camera. Next, consider how you will wear it. A strap that adjusts in length suits people who switch between the hand and the wrist. Finally, think about the material. Plastic and fiber mounts are lightweight choices for handheld shooting.

Frequently Asked Questions

Which cameras is it compatible with?
It is compatible with GoPro, DJI, Insta360, Sjcam, and yi action cameras.

Is the camera included?
No. The camera itself is not included, so you will need your own compatible action camera.

What is the mount made of?
The mount is made of ABS+Fiber material.

What comes in the package?
The package contains 1 long screw and 1 360 rotating palm stand.

Is it water resistant?
No. It is not water resistant, so keep it dry during use.

Key Features

• Deepal S05 Fit — It is designed for the Deepal S05 vehicle model.

Product Specifications

• Vehicle model: Deepal S05

What It Is / How It Works

This is an automotive interior charging pad, a wireless charging pad made for the centre console area of a car. Charging pads of this type sit on a flat surface, usually near the gear selector or cup holders, so a phone can rest there while the car is in use.

Who It's For / Use Cases

Car owners with a Deepal S05 who want a flat spot in the centre console for a phone or small items tend to find a charging pad of this type useful. It suits drivers who keep a phone on the console during trips and want a tidy place for everyday items in the same area.

How to Use / Care

1. Use it to keep a phone charging and small items organised in the central control area of the Deepal S05.

How to Choose

Start by confirming the vehicle is a Deepal S05 before ordering, since that is the model this is designed for. Next, pick the model year that matches your car, since 2025 and 2026 are the years covered. Consider how much room you need for storage and cup holder items, as the central control area has limited space.

Frequently Asked Questions

Which vehicle is this designed for?
It is designed for the Deepal S05 vehicle model, and the 2025 and 2026 model years are the ones covered.

Is it a wireless charging pad?
Yes, it is an automotive interior wireless charging pad for the central control area. It sits on the centre console so a phone can rest on it while charging.

Which area of the car does it suit?
It suits the central control area of a Deepal S05, where cup holders and small storage items usually sit.

Can it be used in another car?
It is designed for the Deepal S05 vehicle model, so confirm the model before buying for a different car.

Key Features

• Suction Cup Mount — The suction cup attaches the mount to a windshield, and the mount is specially designed for TomTom GPS devices.
• Lock In Place — The suction cup lets you lock the mount in place on the windshield.
• Secure Ball Socket — The ball socket is designed to hold the device securely.

Product Specifications

• Color: Black
• Material: PC+TPU
• Quantity: 1 car mount GPS holder

What It Is / How It Works

This car windshield suction cup mount GPS holder attaches to the windshield with a suction cup. It is specially designed for TomTom GPS devices and holds the device in a ball socket.

Who It's For / Use Cases

Car windshield GPS holders suit drivers who want a navigation screen within easy view on the windshield. A suction cup mount suits people who prefer a holder they can move between vehicles, as long as the glass is smooth enough for the cup to grip.

How to Use / Care

1. Attach the mount to the windshield with the suction cup and lock it in place.
2. Seat the navigation device in the ball socket of the mount.
3. Use it to hold a TomTom GPS device on a car windshield.

How to Choose

Start with the navigation device you own, since a holder is made for a specific device family and the ball socket must suit that unit. Confirm your model is supported before ordering. Consider the windshield glass as well, because suction cups generally grip smooth surfaces best. Color and material are listed in Product Specifications for buyers who want a black holder with a PC+TPU build.

Frequently Asked Questions

What devices is it made for?
It is specially designed for TomTom GPS devices, and its ball socket is designed to hold the device securely.

What is the holder made of?
The holder is made of PC+TPU material and comes in black.

How does it attach to the car?
The suction cup attaches the mount to the windshield, and you lock it in place so the mount stays put.

How many pieces are in a pack?
The pack contains one car mount GPS holder.

Key Features

• Suction Cup Mount — The suction cup attaches the holder to the windshield, and you lock it in place.
• Designed for TomTom — The holder is made specifically for TomTom GPS units.
• Ball Socket Fit — It fits securely in the ball socket of the TomTom GPS mount.

Product Specifications

• Material: PC+TPU
• Color: Black
• Package Contents: 1 car mount GPS holder

What It Is / How It Works

This car mount GPS holder is a windshield suction cup mount for TomTom GPS units. It holds the unit in the car so the screen stays within reach while you drive.

Who It's For / Use Cases

Car mount GPS holders suit drivers who want a TomTom navigation unit mounted at a fixed height on the windshield. They are useful for people who share a vehicle, switch between cars, or prefer to keep the navigation screen in the same place on every trip without fixing anything to the dashboard.

How to Use / Care

1. Attach the mount to the windshield with the suction cup and lock it in place.
2. Use it to hold a TomTom GPS in the ball socket.

How to Choose

Start with your TomTom model, since this holder is made for TomTom GPS units. Look at how you want the navigation screen placed in your view, then choose a holder that sits where you can reach the unit safely. The black color is a plain finish that suits most car interiors.

Frequently Asked Questions

What is the holder made of?
It is made of PC+TPU.

Which GPS units is it for?
It is designed specifically for TomTom GPS units, and the ball socket is built to hold the TomTom mount securely.

How does it attach to the car?
The suction cup attaches the holder to the windshield, and you lock it in place.

What comes in the package?
The package contains one car mount GPS holder.

What color is it?
It is black.

Key Features

• Silica Gel Material — The pad surface is made of silica gel.

Product Specifications

• Material: Silica Gel
• Compatible models: Tesla Model Y Juniper/Launch 2025–2026

What It Is / How It Works

This car wireless charging pad is a non-slip mat for holding a phone while it charges wirelessly inside a vehicle. Pads of this type give a phone a flat resting spot in the cabin, so the phone does not need to be held or propped up while it charges.

Who It's For / Use Cases

Car wireless charging pads suit drivers who keep a phone on the dashboard or console during short trips and want it to stay in one spot while charging. They are a practical choice for anyone who wants a flat, stable place for a phone inside the vehicle.

How to Use / Care

1. Place your phone on the pad while it charges in the car.

How to Choose

Start with the size of the pad. It should be large enough for your phone, with or without a case, and fit the spot in the car where it will sit. Consider whether that spot is flat enough for the phone to rest securely, such as a dashboard, console or tray. Look at the surface material as well, since it affects how the phone sits on the pad.

Frequently Asked Questions

What is the pad made of?
It is made of silica gel.

Who makes it?
The brand is LUCKEASY.

What is it for?
Car wireless charging pads give a phone a flat, non-slip spot to rest while it charges wirelessly in the car.

How do I pick the right size?
Measure the spot in the car where the pad will sit, then choose a pad that leaves room for the phone and any case you use.

Key Features

• Five-Point Support — The 5-point support design provides maximum safety while the phone is held.
• Scratch-Resistant Build — The ultra-thin holder is scratch-resistant and keeps a slim profile.
• Simple Installation — You can install and remove your phone with simple manual steps.

Product Specifications

• Material: ABS
• Smartphone size: 4.7-6.5 inches
• Package contents: 1 mobile phone holder

What It Is / How It Works

This automatic grip car phone holder is made of ABS and is designed to save space in car interiors. Car phone holders like this one keep a phone in view and within reach while the vehicle is in use.

Who It's For / Use Cases

Car phone holders suit drivers who want to keep a phone steady and visible while driving, and who prefer a mount that does not take up much room in the cabin. They also suit people who want a holder that is quick to fit and remove when they move the phone between vehicles.

How to Use / Care

1. Use it to hold a smartphone in a car.

How to Choose

Choose a car phone holder by checking that your phone falls within the supported size range. This holder fits smartphones from 4.7-6.5 inches. Consider the mounting space in your vehicle and the phone case thickness, since a thicker case can change how the claws grip.

Frequently Asked Questions

What size phone does it fit?
It fits smartphones from 4.7-6.5 inches.

What is it made of?
It is made of ABS.

How does it hold the phone?
Four silicone claws provide strong stability, and shock absorbers are fixed on the back.

What does the package include?
The package has 1 mobile phone holder.

How do I install and remove the phone?
You can install and remove your phone with simple manual steps.