Key Features

• Three Smart Ports — Total output reaches up to 56W without sacrificing charging speed.
• USB-C PD Port — The USB-C port is rated 20W at 12V and 30W at 24V, and it suits devices such as iPhone, iPad, AirPods and Galaxy phones.
• Dual QC 3.0 Ports — The dual QC 3.0 ports are backward compatible with all QC versions and charge compatible devices up to 60% in about 35 minutes.
• Waterproof Cover — The socket has a removable waterproof cover and is dust proof, so it can be used in harsh environments.
• Overcurrent Protection — A 10A fuse guards against overcurrent, overload and short circuit, and the chip stops charging once a device is full.

Product Specifications

• Input voltage: 12V-24V
• USB-C PD output: 20W at 12V, 30W at 24V
• Total output: 56W
• Out Power: 100W
• Interface: USB 2.0
• Dimensions: 4.2 × 3.7 × 2.8 cm (1.65 × 1.46 × 1.1 in)
• Material: Plastics
• Voltage: 5V

What It Is / How It Works

This car charger is a 12V/24V USB socket adapter with three ports, built to charge phones and tablets from a vehicle's 12V outlet. Its 12V-24V input and total output of up to 56W are set out in the specifications.

It is compatible with 12V-24V vehicles, boats, ATVs, motorcycles, bicycles, trucks, golf carts, RVs and SUVs.

Who It's For / Use Cases

Car chargers like this suit drivers who want to charge phones, tablets and earbud cases from a 12V socket while on the road. They are a practical choice for owners of motorcycles, boats, ATVs and RVs who want USB power from a 12V outlet, and for anyone who needs several devices charged at once.

How to Use / Care

1. For iPhone series charging, use a USB C to Lightning cable, which is not included.
2. Connect the red wire to positive (+) and the black wire to negative (-).
3. Use the socket in a 12V-24V vehicle or another supported vehicle.
4. Keep the removable waterproof cover in place when the socket is not in use, so it stays dust proof.

How to Choose

Choose a car charger socket by the devices you plan to charge and the power they need. Multi-port sockets share total output across their ports, so compare the per-port ratings with the charging requirements of your devices. Check the input voltage matches your vehicle or boat before you buy.

Frequently Asked Questions

Can it charge a laptop?
It does not support charging laptops such as Lenovo, HP, Dell or Macbook models.

Does the iPhone series need a cable?
The iPhone series requires a USB C to Lightning cable, which is not included.

What voltage does it accept?
It accepts 12V-24V, and the USB-C PD port is rated 20W at 12V and 30W at 24V.

Is the socket waterproof?
It has a removable waterproof cover and is dust proof, so it can be used even in harsh environments.

How are the wires connected?
The red wire is positive and the black wire is negative. The LED light shows up after the item is connected to the battery.

Upgrade your GAC Trumpchi GS8 with a set of front ceramic brake pads designed for reliable, quick-stop performance. These pads are built to restore your SUV's original braking feel while reducing noise and dust for a cleaner, more comfortable drive.

These THREEON brake pads are a direct fit for the GAC Trumpchi GS8 2.0T models from 2016 to 2022. They use a ceramic formula that combines the best qualities of ceramic and semi-metallic materials, giving you a balanced performance for daily driving and highway cruising. The pads come with a pre-applied Titanium Blue layer that eliminates the need for a break-in period, so you get confident braking right from the start.

Noise reduction is a key focus. A three-layer shim structure made of steel, rubber, and steel absorbs vibrations, while chamfered edges help minimize sound. The result is a quieter braking experience compared to standard replacement pads. The red backing plate and blue friction surface also add a subtle custom look behind your wheels.

These pads are engineered to meet or exceed OE standards. They are asbestos-free and built to last, with a service life of at least 30,000 kilometers under normal driving conditions. Whether you are navigating city traffic or mountain roads, these pads provide consistent, dependable stopping power.

Key Features and Benefits

- Ceramic formula that blends ceramic and semi-metallic properties for balanced braking performance

• Pre-applied Titanium Blue layer eliminates the running-in period for immediate confidence

• Three-layer steel, rubber, and steel shims reduce vibrations and lower braking noise

• Chamfered edge design further minimizes noise for a quieter ride

• Asbestos-free material for safer, cleaner operation

• Red backing plate with blue friction surface adds a personalized style element

Who Is This For

- GAC Trumpchi GS8 owners looking for a direct OE replacement with improved noise control

• Drivers who want a quick-stop performance upgrade without a break-in period

• Car enthusiasts who appreciate a clean, dust-resistant brake pad for daily use

• Anyone replacing worn front brake pads on a 2016-2022 GS8 2.0T model

Usage Scenario

Mark drives his 2019 Trumpchi GS8 through hilly suburban roads every day. After noticing a squeaking sound when braking, he decided to swap his old pads for these THREEON ceramic pads. The installation was straightforward, and from the first drive, the noise was gone. He appreciated not having to go through a break-in process and felt immediate, confident stopping power on his morning commute.

Micro Comparison

Compared to standard semi-metallic pads, these ceramic pads produce less brake dust, keeping your wheels cleaner. The three-layer shim design also provides better noise dampening than many budget options. While some high-performance pads require a break-in period, the Titanium Blue layer on these pads lets you drive away with full braking performance from the start.

Specifications

- Material: Ceramics

• Placement on Vehicle: Front

• Item Height: 59 mm / 2.3 in

• Item Length: 193.2 mm / 7.6 in

• Item Width: 18.15 mm / 0.7 in

• Item Weight: 2.98 kg / 6.6 lb

• Interchange Part Number: FDB4992

• Other Part Number: DB1608

• Manufacturer Part Number: TO1246-F

• OEM Number: Front 8835001CAD0000

• Compatible Models: Trumpchi GS8 320T 2016-2022 (4B20M1), Trumpchi GS8 390T 2019-2022 (4B20J1)

Please allow 1-3 mm / 0.04-0.12 in difference due to manual measurement.

Package Includes

- 1 Set of Front Ceramic Brake Pads (4 pads total, for left and right sides)

Why You Will Love It

You will love how these pads restore your GS8's original braking feel without the annoying squeal. The no-break-in design means you can install them and drive with confidence immediately. Plus, the reduced dust keeps your front wheels looking cleaner longer.

Questions and Answers

Question: Will these brake pads fit my 2017 GAC Trumpchi GS8 2.0T?

Answer: Yes, these front ceramic brake pads are designed to fit the GAC Trumpchi GS8 2.0T models from 2016 to 2022, including the 2017 model year.

Question: Do these pads require a break-in period?

Answer: No, they do not. The Titanium Blue layer eliminates the need for a running-in period, so you get full braking performance right after installation.

Question: Are these pads noisy compared to OEM pads?

Answer: They are designed to be quieter than many standard replacement pads. The three-layer shims and chamfered edges help reduce noise and vibration.

Question: What is the expected lifespan of these brake pads?

Answer: Under normal driving conditions, these pads provide a service life of at least 30,000 kilometers, though actual lifespan depends on driving habits and road conditions.

Question: Do these pads come with hardware or clips?

Answer: The package includes the set of four front brake pads. You should reuse your existing hardware or purchase new clips separately if needed.

Key Features

• Ceramic Formulation — A ceramic material formulation that reduces brake dust and provides quiet, consistent braking.
• Wear Warning Contacts — The set includes wear warning contacts, two per axle at 250 mm length, that alert you when pads need replacement.
• Asbestos-free Composition Is — Asbestos-free composition that is safer for the environment and your vehicle.

Product Specifications

• Material: Ceramics
• Placement on Vehicle: Rear
• Dimensions: 11.64 cm
• Weight: 1 kg / 2.2 lb
• Interchange Part Number: TO1510-R

What It Is / How It Works

This rear brake pad set is a direct replacement for multiple OEM part numbers, including 4H0698451A, making installation straightforward. Built with a ceramic material formulation, the pads offer a balance of durability and low dust output, helping to keep wheels cleaner than traditional semi-metallic pads.

Who It's For / Use Cases

These pads suit Audi A6 C7 or A7 owners (2012-2018) looking for a reliable rear brake pad replacement, Audi A8 D4 or S8 owners (2011-2018) needing OE-spec rear pads with wear indicators, Porsche Macan owners (2015-2017) seeking a cost-effective rear brake pad set, and performance Audi RS5, RS6, or RS7 owners (2013-2018) wanting ceramic pads for daily use.

How to Use / Care

1. Performance Audi RS5, RS6, or RS7 owners (2013-2018) wanting ceramic pads for daily use.

How to Choose

Choose these rear brake pads when you need a direct OE replacement for select Audi A6, A7, A8, S6, S7, S8, RS5, RS7, and Porsche Macan models. Confirm your vehicle's rear axle fitment and whether you prefer a ceramic formulation for reduced dust and quiet operation.

Frequently Asked Questions

Will these brake pads fit my 2013 Audi A6 C7?
Yes, these rear brake pads are compatible with the 2012-2018 Audi A6 C7 and A7 models, including the 2013 A6.

Do these pads come with wear sensors?
Yes, the set includes 2 wear warning contacts, one for each side of the rear axle.

Will these work on a Porsche Macan S?
Yes, they are compatible with the 2015-2017 Porsche Macan, Macan S, and Macan GTS rear brakes.

What is the thickness of these brake pads?
The pad thickness is 17.20 mm, which is standard for OE replacement rear pads on these models.

Key Features

• Nylon and Spandex Knit — It is made of 67% nylon and 33% spandex in a knit construction, so the fabric is soft and lightweight.
• Low Profile Fit — It has no hardware, is thin and supportive, and fits both left and right hands. The fabric is breathable, absorbs sweat and dries quickly.
• Friction Reduction — When worn with various types of thumb supports, it reduces direct friction against the skin.
• Everyday Activity Use — It suits everyday tasks such as cooking and gardening, and sports including tennis, golf and yoga.

Product Specifications

• Piece Count: 1Pcs
• Material: 67% nylon, 33% spandex
• Craft of Weaving: Knit
• Designed For: Unisex
• Compatible models: Arthritis

What It Is / How It Works

This thumb brace is a thin knit sleeve for the thumb and wrist, sold as a thumb and wrist stabilizer. It is a sleeve layer that can be worn in combination with other wrist and thumb braces, giving light support for thumbs that feel weak, aching or sore.

Who It's For / Use Cases

Thumb braces of this type suit people who spend long hours at computers or mobile phones, or who put strain on their thumbs during housework and handwork. Because it is designed for men and women alike, it works for either gender who wants a light thumb and wrist layer for daily tasks.

How to Use / Care

1. Wear it when using a computer or mobile phone for long periods, or during housework and handwork.
2. Wear it alone or with various types of thumb supports, which it can be worn under to reduce direct friction.
3. Put it on and take it off as needed.
4. Clean it when needed.

How to Choose

Choose by the activity you do most. For long computer or phone use, or heavy hand tasks, a thin, light sleeve that stays in place without restricting the thumb is the main selection point. The sleeve fits both left and right hands, so one size range covers either hand.

Frequently Asked Questions

Does it fit the left or right hand?
It fits both left and right hands, and it is worn on the thumb and wrist.

What is it made of?
It is made of 67% nylon and 33% spandex in a knit construction.

Does it have any hardware or hard protective gear?
It has no hardware, and it is not a hard protective gear product.

Can I wear it with other thumb supports?
Yes. It can be worn in combination with other thumb braces and various types of thumb supports, and it reduces direct friction when used that way.

What activities is it suited for?
It suits everyday tasks such as cooking and gardening, and sports including tennis, golf, badminton and yoga.

Key Features

• Clip-On Valve Lock — The clip-on design locks onto the tire valve for a secure, hands-free connection.
• 6mm Hose Fit — It fits 6mm inner diameter air hoses, so it works with many inflators.
• Metal Construction — The metal body is built for durability and long-lasting use.
• Inner Dual-Wheel Reach — It lets you inflate inner tires on dual-wheel vehicles without removing the outer wheel.
• Compact Storage Size — At 5.5 x 3 x 1.5 cm (2.17 x 1.18 x 0.59 in), it is compact for easy storage.

Product Specifications

• Hose Inner Diameter: 6mm (0.24 in)
• Material: Metal
• Color: Silver
• Dimensions: 5.5 x 3 x 1.5 cm / 2.17 x 1.18 x 0.59 in (L x W x H)

What It Is / How It Works

This tire inflator pump adapter connector is a clip-on fitting for 6mm air hoses. It attaches to a tire valve so an air hose can reach it, and it is designed for inner valves on dual-wheel vehicles where a standard air chuck is hard to use.

Who It's For / Use Cases

It suits truck and bus drivers who need to inflate inner tires on dual-wheel setups, RV and camper owners who want a compact tire inflation tool, mechanics and fleet maintenance workers who service large vehicles regularly, and DIY drivers who want a backup air chuck for a portable compressor.

How to Use / Care

1. Connect your 6mm air hose to the clip-on connector and keep the tight seal lock-on engaged to help prevent air leaks during use.
2. Use it on inner tire valves of dual-wheel setups without removing the outer wheel.
3. Store it in a glove box or tool kit when not in use, since it is compact.

How to Choose

Start with your air hose inner diameter, because this connector is designed for a 6mm (0.24 in) hose. A 1/4 inch hose is slightly larger and may need an adapter. Next, consider the valve: it works with a standard Schrader valve. If you service dual-wheel vehicles, the connector's reach to inner valves is the main reason to choose it.

Frequently Asked Questions

Will this work on a standard car tire?
It works on any tire with a standard Schrader valve, and it is especially useful for dual-wheel setups.

Does this connector fit a 1/4 inch air hose?
It is designed for a 6mm inner diameter hose, which is slightly smaller than 1/4 inch, so a 1/4 inch hose may need an adapter.

Is the spring removable?
Yes, the spring can be removed if you prefer a standard clip-on connector without extra tension.

How do I attach it to my air hose?
Push the barbed end of the connector into your 6mm air hose. The barb holds it in place securely.

Can it inflate air mattresses or sports balls?
It is designed for tire valves. For other inflation tasks, you would need a different nozzle or adapter.

Key Features

• Full Tire Set — This kit covers all four tires with lettering for the top and bottom, giving a complete set for your vehicle.
• Durable PVC Build — Made from PVC, these lettering stickers are built to handle the conditions tires face.
• Waterproof Design — The stickers are waterproof and 1. 5mm thick, so they hold up against rain and road spray.
• Designed Surface Mounting — Designed for surface mounting on tires and rims, these stickers apply directly to the sidewall.

Product Specifications

• Material: PVC
• Design: Words
• Model: Number / Letter
• Mounting Type: Surface mount
• Sticker Placement: Tires & Rim
• Water Resistance Level: Waterproof
• Fits: 14"-22" diameter Tires/Rims
• Packaging: Not Packaged

What It Is / How It Works

This is a tire lettering sticker kit for cars and other vehicles. It includes separate letters and flag or stripe accents that you apply to your tire sidewalls. The kit is designed to cover all four tires, with lettering for both the top and bottom of each tire.

Who It's For / Use Cases

Tire lettering stickers suit car owners who want to personalize their wheels with a custom word or phrase. They are also a good choice for enthusiasts who enjoy detailing their vehicle and want a distinctive look that stands out. Because the letters are separate, you can arrange them to spell almost anything you like.

How to Use / Care

1. Clean the tire sidewall where you plan to place the letters. Make sure the surface is free of dirt, grease, and moisture.
2. Peel one letter from its backing and position it on the tire. Since the letters are separate, you can place them one by one to form your desired text.
3. Press the letter firmly onto the tire, smoothing out any air bubbles or wrinkles.
4. Repeat for each letter and accent piece until your design is complete. Allow the adhesive to set before driving.

How to Choose

When choosing tire lettering, measure the sidewall of your tire between the two manufacturing lines. This ensures you pick a size that fits properly. 06 inches works well for many tires, but always verify against your own sidewall. Finally, think about the design: this kit includes separate letters and flag or stripe accents, so you can create a custom look that matches your style.

Frequently Asked Questions

What is included in the kit?
The kit includes 8 sets of letters plus flag or stripe accents, enough to cover all four tires with lettering on the top and bottom.

What material are the stickers made of?
The stickers are made of PVC and are 1. 5mm thick. They are also waterproof, so they can handle rain and road conditions.

How do I know if the letters will fit my tires?
Measure the sidewall of your tire between the two manufacturing lines. The letters are 1. 06 inches tall and fit tires and rims with a diameter of 14 to 22 inches.

Are the letters easy to apply?
Yes, the letters are separate and surface-mounted. You apply them one by one, which makes it easy to arrange them in any order you want.

Key Features

• Needle Holds Reading — The needle holds the reading until you press the button to release it.
• PSI and Bar Range — It measures in PSI from 0 to 50 and in bar from 0 to 3.5.
• Multiple Pressure Units — It is calibrated in lbs, kPa, kgs or bar.
• 45-Degree Angle Chuck — The 45-degree angle chuck is fitted to allow easy connection to the tire valve.

Product Specifications

• Piece Count: 1 pc
• Material: Plastic
• Pressure Range: 0 to 50 PSI; 0 to 3.5 bar
• Calibrated Units: lbs, kPa, kgs or bar

What It Is / How It Works

This tire pressure gauge is a tool for checking the air pressure in car, motorcycle and bicycle tires. It has a plastic body, a needle that holds the reading, and a 45-degree angle chuck for connecting to the tire valve.

How to Use / Care

1. Use it to check the pressure of car, motorcycle and bicycle tires.

Frequently Asked Questions

What pressure units does the gauge show?
It measures PSI from 0 to 50 and bar from 0 to 3.5, and it is calibrated in lbs, kPa, kgs or bar.

Does the reading stay on the gauge after I take it?
The needle holds the reading until you press the button to release it.

How does the chuck connect to the tire?
It has a 45-degree angle chuck that connects to the tire valve.

Does it need a battery?
No. It is an analog gauge, and it does not include a battery.

What is it made of?
It is made of plastic.

Key Features

• 315MHz Frequency — It operates at 315MHz, matching the frequency of factory GM TPMS systems for reliable communication.
• Pre-Programmed Setup — It comes pre-programmed for a specific make, model, and year, so no programming is needed before installation.
• Two-Year Battery Life — The built-in battery is designed to last about two years, which reduces how often the sensor needs replacing.
• OEM Part Replacement — It replaces OEM part 13540600 and several interchange numbers, including 13586335 and 15123145.
• TPMS-Grade Construction — Built from TPMS-grade materials designed to handle road conditions and temperature shifts.

Product Specifications

• Frequency: 315MHz
• Battery Life: About 2 years
• OEM Part Number: 13540600
• Interchange Part Numbers: 13586335, 15123145, 15254101, 25920615, 22853741, 13598772, 13598771, 15920615, 20923680, 15922396, 13581558, 23445327, 13589255, 22854866, 13516164
• Package Quantity: 1 sensor

What It Is / How It Works

This is a 315MHz tire pressure monitoring sensor and a direct replacement for OEM part 13540600. It restores real-time tire pressure monitoring when a sensor is faulty or missing, helping keep the dashboard warning light off.

Who It's For / Use Cases

TPMS replacement sensors suit vehicle owners who see a persistent tire pressure warning light after a sensor has failed. DIY mechanics who prefer to replace a sensor themselves often choose this type of part. Used car buyers, dealers, repair shops, and fleet managers who maintain several vehicles may also need a dependable replacement sensor.

How to Use / Care

1. Install the sensor using basic tools.
2. Activate the sensor with a TPMS scan tool after installation.
3. If you do not use a scan tool, follow your vehicle's re-learning procedure to sync the sensor with the car's system.

How to Choose

Start with the part number. Compare the OEM part number or interchange number from your old sensor against the Product Specifications list. Next, confirm the operating frequency, since 315MHz is the frequency used by many GM vehicles. Choose a sensor that matches both the part number and the frequency your vehicle uses.

Frequently Asked Questions

Do I need to program this sensor before installing it?
No, it comes pre-programmed for a specific make, model, and year. After installation, activate it with a TPMS scan tool or follow your vehicle's re-learning procedure.

How long does the battery last?
The built-in battery is designed to last about two years under normal driving conditions.

Can I install this sensor myself?
Yes, if you have basic tools and a TPMS scan tool to activate the sensor. Many DIYers complete the job in under 30 minutes.

What frequency does this sensor use?
It operates at 315MHz, which is the standard frequency used by many GM vehicles.

Key Features

• Four-Tire Monitoring — It monitors the pressure and temperature of all 4 tires in real time.
• Multiple Alarm Alerts — It warns of low or high tire pressure, rapid air leaks, high tire temperature and low battery voltage.
• Interior and Exterior Sensors — It supports interior sensors and exterior sensors.
• Solar and USB Power — The display runs on solar power or USB cable power.
• Auto Display Sleep — The display turns on when it detects vibration and sleeps after parking for more than 10 minutes.

Product Specifications

• Working Frequency: 433.9200MHz±0.1Mhz
• Pressure Monitoring Range: 0-5bar
• Temperature Monitoring Range: -40℃~ +120℃
• Precision: temp ±2℃ ; pressure ±0.1bar

What It Is / How It Works

It monitors the pressure and temperature of each of the 4 tires and shows the readings on an LCD display.

How to Use / Care

1. Turn on the host before you install the sensors.
2. Install the interior or exterior sensors; they connect wirelessly to the host.
3. To turn the unit on or off, press the "-" button for 3 seconds.

How to Choose

Check the pressure and temperature monitoring ranges in the specifications against the conditions you expect to check.

Frequently Asked Questions

How many tires does it monitor?
It monitors the pressure and temperature of all 4 tires in real time.

What alarms does it give?
It gives alarms for low and high tire pressure, rapid air leaks, high tire temperature and low battery voltage. A buzzer sounds a continuous beep, and pressing any key cancels the tone while the fault icon stays on the display.

How is the display powered?
The display runs on solar power or USB cable power.

When does the display sleep?
The display turns on when it detects vibration and sleeps after parking for more than 10 minutes.

What are the monitoring ranges?
Pressure is monitored from 0 to 5 bar and temperature from -40℃ to +120℃. Pressure accuracy is ±0.1 bar and temperature accuracy is ±2℃.

Key Features

• Colorful LCD Display — The colorful LCD display shows tire information clearly.
• Real-Time Monitoring — It monitors the pressure and temperature of all 4 tires in real time.
• Solar and USB Charging — It charges from solar power or USB, so it does not need to be plugged into the car cigarette lighter.
• Multiple Alarms — Alarms cover air leakage, high and low pressure, and high temperature.
• IP67 Protection — The unit carries an IP67 rating and is waterproof.

Product Specifications

• Material: PC
• Pack: 1 set
• Working temperature: -20℃-60℃
• Temperature measurement: -30 ℃ -85 ℃
• Battery life: 3-5 years, replaceable

What It Is / How It Works

These are tire pressure monitoring systems for cars, with external sensors for the tires. The set uses external sensors that report pressure and temperature for the tires to a colorful LCD display.

Who It's For / Use Cases

Tire pressure monitoring sensors suit drivers who want early warning of low pressure, high temperature or air leakage in their tires. They also suit drivers who prefer a monitor that charges from sunlight or USB instead of the cigarette lighter, and anyone who wants to read all four tires at a glance while driving.

How to Use / Care

1. Read the pressure and temperature of each of the four tires on the LCD display.
2. Charge the unit with solar power or through USB.
3. Choose PSI or Bar as the pressure unit, whichever you prefer.

How to Choose

Pick a system that reports the readings and alarms you need, such as pressure, temperature and air leakage. Check the working temperature range against the climate where you drive, and consider whether solar or USB charging suits how you park your car.

Frequently Asked Questions

What temperature range does it cover?
The working temperature is -20℃-60℃, and the temperature measurement range is -30 ℃ -85 ℃.

How long does the battery last?
The battery life is 3-5 years, and the battery is replaceable.

Can I change the pressure units?
Yes. It has two units, PSI and Bar, and you can set the one you like.

Does it need the car cigarette lighter to charge?
No. It charges from solar power or USB, so you do not need to connect it to the cigarette lighter.

Is it waterproof?
It carries an IP67 rating and is waterproof.

Keep your truck, RV, or bus tires under constant watch with this solar-powered tire pressure monitoring system. It tracks pressure and temperature for up to six tires simultaneously, sending real-time alerts for dangerous changes like rapid leaks, high heat, or low battery. The wireless sensors install easily, and the LCD display wakes automatically when you start driving.

This TPMS is built for heavy vehicles where tire safety is critical. The solar-powered receiver stays charged without extra wiring, and the system monitors pressure up to 9.9 bar and temperatures from -40°C to 120°C. When something goes wrong, you get both a flashing alarm on the display and an audible buzzer so you can react fast and avoid blowouts or tire damage on the road.

Installation is straightforward. The sensors and receiver come pre-paired from the factory, so you only need to mount the sensors on your tire valves and place the receiver on your dashboard. The system automatically enters sleep mode after 10 minutes of parking to save power and wakes up when it detects vibration once you start moving again.

For fleet managers, RV owners, or truck drivers, this TPMS gives you peace of mind. Instead of guessing tire health, you get accurate, real-time data for each tire position. The alarm system covers low pressure, high pressure, rapid leakage, high temperature, and low sensor battery, so you can address issues before they become emergencies on the highway.

Key Features and Benefits

- Solar-powered receiver that charges automatically and eliminates the need for constant battery replacement or hardwiring

• Real-time monitoring of tire pressure and temperature for six tires simultaneously, helping you catch problems early

• Audible and visual alarms for low pressure, high pressure, rapid air leak, high temperature, and low sensor battery

• Wireless connection with interior or external sensors, making installation quick and tool-free

• Automatic wake and sleep mode that conserves battery when parked and activates when driving begins

• LCD digital display that clearly shows pressure and temperature readings for each tire position

Who Is This For

- Truck drivers who need constant tire monitoring for safety and fuel efficiency on long hauls

• RV owners who want to avoid tire blowouts and maintain stable pressure during extended trips

• Bus operators and fleet managers looking for a reliable, low-maintenance TPMS to protect their vehicles and passengers

• Anyone driving a heavy vehicle that requires six-tire monitoring and prefers a solar-powered, wireless system

Usage Scenario

Mark drives a Class A RV across the country for work. Last year, he had a rear tire blowout on a remote highway, which cost him a full day and a repair bill. Since installing this TPMS, he checks the display before each drive and gets an instant alert when a tire started losing pressure slowly. He pulled over, added air, and avoided another blowout. Now he drives with confidence, knowing the system watches his tires even when he is focused on the road.

Micro Comparison

Unlike basic tire pressure gauges that only give you a reading at a single moment, this TPMS monitors all six tires continuously and alerts you to changes while you drive. Many aftermarket systems require hardwiring or frequent battery changes, but this one uses solar power and automatic sleep to stay hassle-free. The pre-paired sensors also save you the trouble of manual pairing.

Specifications

Material: ABS + aluminum

Working Frequency: 433.9200MHz ± 0.1Mhz

Temperature Monitoring Range: -40°C to +120°C (-40°F to +248°F)

Pressure Monitoring Range: Maximum 9.9 bar (143.6 psi)

Precision: Temperature ±2°C / ±3.6°F; Pressure ±0.1 bar / ±1.45 psi

Types: Interior sensors or external sensors

Package Includes

- 1 set Car Tyre Pressure Monitoring System (includes receiver and 6 sensors)

Why You Will Love It

You get a full tire safety system that works without constant attention. The solar receiver keeps itself powered, the sensors report accurate data, and the alarms wake you up to problems before they become roadside emergencies. It is a simple, reliable way to protect your vehicle, your cargo, and your passengers.

Questions and Answers

Question: How do I install the sensors on my truck tires?

Answer: Mount the sensors onto your tire valve stems. They connect wirelessly to the receiver, so no tools or wiring are needed for the sensor installation.

Question: Does the receiver need to be plugged into a power outlet?

Answer: No. The receiver is solar-powered and charges automatically when exposed to light. It does not require a separate power cable.

Question: Will the system work on a trailer or fifth wheel?

Answer: Yes. The TPMS supports up to six tires, so it can monitor a truck and trailer combination or a single vehicle with six wheels.

Question: How do I know if a tire has a problem while I am driving?

Answer: The display shows a flashing alarm symbol for the affected tire, and the buzzer sounds continuously. You can press any button to silence the buzzer, but the alarm icon stays on until the issue is resolved.

Question: What happens if a sensor battery runs low?

Answer: The display flashes the low battery symbol for that sensor, and the buzzer alerts you. You can then replace the sensor battery as needed.

Replace your old or faulty tire pressure sensors with this set of four pre-programmed TPMS sensors. Designed for a wide range of Toyota, Lexus, and Scion vehicles, these 315MHZ sensors provide a direct fit and simple activation process to restore your vehicle's tire pressure monitoring system.

This set includes four sensors that come pre-programmed for your specific vehicle model. No complex sensor programming is required. You just need to activate them using a scan tool or perform a relearn procedure, which can be done with an OBDII tool. This makes the replacement process straightforward for trained professionals.

These sensors are engineered to match the original specifications of your vehicle's TPMS system. With a battery life of about five years, you can count on reliable performance and accurate tire pressure readings for the long term. Maintaining correct tire pressure helps improve fuel efficiency, extend tire life, and enhance overall driving safety.

Installation of TPMS sensors should always be performed by a trained professional to ensure proper fit and function. Before ordering, check your vehicle's compatibility by reviewing the product pictures, your VIN code, and the original part number to confirm a correct match.

Key Features and Benefits

- Pre-programmed sensors that eliminate the need for manual programming, saving installation time and complexity.

• 315MHZ operating frequency that matches the original system for reliable communication with your vehicle.

• Long battery life of about 5 years, providing lasting performance and reducing the need for frequent replacements.

• Direct replacement design that fits a wide range of Toyota, Lexus, and Scion models, making it easy to find the right fit.

Who Is This For

- Toyota owners with models like Camry, Highlander, Land Cruiser, RAV4, and others from 2004 to 2015.

• Lexus drivers with vehicles such as GS350, LX470, RX350, and more from 2004 to 2015.

• Scion owners with models like xB, tC, xD, and iQ from 2007 to 2015.

• Car owners who need a complete set of four sensors to replace all units at once for consistent performance.

Usage Scenario

Mark noticed his Toyota Camry's tire pressure warning light had been on for weeks. After checking the tires and finding no leaks, he knew the sensors were likely failing. He ordered this set of four pre-programmed sensors and took them to his mechanic. The mechanic installed them and used an OBDII tool to complete the relearn process. The warning light turned off, and Mark could finally see his tire pressures on the dashboard again, giving him peace of mind on his daily commute.

Micro Comparison

While some TPMS sensors require complex programming with specialized equipment, this set comes pre-programmed for your specific vehicle. This reduces the installation steps to just activation and relearning. Compared to single-sensor purchases, this 4-pack provides a complete set, ensuring all sensors are replaced at the same time for balanced performance and battery life.

Specifications

- Material: TPMS Tyre Pressure Sensor

• Operating Frequency: 315MHZ

• Battery Life: About 5 Years

• Part Number: 42607-33021, 4260733021, PMV-107J, PMV107J, 42607-06011, 4260706011

Package Includes

- 4 x Tire Pressure Sensor

Why You Will Love It

Restoring your vehicle's TPMS system gives you one less thing to worry about. These sensors are designed for a straightforward replacement, so you can get back on the road with confidence. Knowing your tire pressure is monitored automatically helps you drive safer and more efficiently.

Questions and Answers

Question: How do I know if these sensors fit my car?

Answer: Check the list of compatible vehicles in the product description. You can also compare your original part number or VIN code with the listed numbers to confirm fitment.

Question: Do I need to program these sensors before installation?

Answer: No, the sensors come pre-programmed for your vehicle. You just need to activate them with a scan tool or perform a relearn procedure.

Question: What is a relearn procedure?

Answer: A relearn procedure is a process that syncs the new sensors with your car's TPMS computer. This can often be done with an OBDII tool or a specific TPMS scan tool.

Question: Can I install these sensors myself?

Answer: Installation of TPMS sensors is recommended to be performed by trained professionals to ensure proper mounting and avoid damage.

Question: What should I do if the sensors do not work after installation?

Answer: First, have your installer scan the sensors to check if they are transmitting data. If there is an issue, contact us for assistance.

Key Features

• Rubber and Copper Alloy — The rubber and copper alloy construction resists corrosion and gives a durable seal.
• Threaded Metal Sleeve — The internal metal sleeve has threads and accepts a golden or plastic cap for a secure closure.
• Four-Piece Set — The set includes four valves, so you can replace several wheels or keep a spare set.
• Tubeless Disc Fit — The straight nipple design fits standard tubeless disc rims and works with TPMS sensors.

Product Specifications

• Material: Rubber and copper alloy
• Color: Black and golden
• Piece Count: 4-Pack

What It Is / How It Works

This tire pressure sensor valve is a straight rubber nipple for tubeless disc wheels. It is designed to replace worn or damaged tire pressure monitoring valve stems without replacing the whole sensor unit. The set contains four valves, and caps are not included.

Who It's For / Use Cases

Replacement TPMS valve stems of this type suit drivers with tubeless tires who need to swap out cracked, aging, or damaged valves. They also fit routine tire maintenance and seasonal wheel changes, where a set of spare valves keeps the wheel assembly ready. Mechanics and DIY owners who service their own vehicles often keep a few spares on hand for this job.

How to Use / Care

1. When installing tubeless tires, follow standard safety procedures and use a valve that matches your rim specifications.
2. Use the straight rubber nipples on tubeless disc wheels with a standard threaded valve stem.
3. Replace the valve when you install a new tire or sensor.
4. Reuse a valve only if its rubber is still in good condition.

How to Choose

Start by confirming that your wheels are tubeless disc wheels, since these nipples are made for that setup. Straight valves point directly outward from the wheel, while angled valves bend to fit specific rim designs, so match the valve shape to your rim. Check that your TPMS sensor uses a standard threaded valve stem. Because the sleeve accepts a golden or plastic cap, choose the cap style you prefer when you order.

Frequently Asked Questions

Will these valves fit my car's TPMS sensors?
They are designed for tubeless disc wheels and are compatible with most direct TPMS sensors that use a standard threaded valve stem.

Do these valves come with caps?
The package includes 4 valves for tire pressure sensors. Caps are not included in this set.

Can I install these valves myself?
Yes, if you have basic tools and experience with tire dismounting. The tire must come off the rim so you can reach the TPMS sensor and replace the valve.

Are these valves reusable if I change tires?
The rubber portion can degrade over time, so replacing the valve when you install a new tire or sensor is recommended. The valves can be reused if the rubber is still in good condition.

What is the difference between straight and angled TPMS valves?
Straight valves point directly outward from the wheel, while angled valves bend to fit specific rim designs. This set contains straight nipples.

Key Features

• Durability-Focused Build — It is built with a focus on long-lasting durability for roadside puncture repairs.

Product Specifications

• Water Resistance Level: Water resistant
• Compatible models: Flat Puncture Fix

What It Is / How It Works

This emergency tire repair kit is a roadside puncture kit for fixing a flat tire. Tire repair kits of this type are built around adhesive and patch materials meant to seal a puncture so a vehicle can be driven to a service point.

Who It's For / Use Cases

Drivers of cars, trucks and RVs who want a basic roadside option for a flat caused by a puncture are the typical buyers. Anyone who travels long distances or spends time away from regular service stops may find a puncture repair kit of this type useful to have on hand.

How to Use / Care

1. Use it to repair a flat tire caused by a puncture.

How to Choose

Match the kit to the vehicle type, since car, truck and RV tires differ in size and load. Check the puncture location and size first, because repair kits of this type generally suit small punctures in the tread more than damage on the sidewall. If the vehicle is driven long distances, a kit that fits the tire type on that vehicle is the most practical choice.

Frequently Asked Questions

What kind of flat is this kit meant for?
It is meant for a flat tire caused by a puncture, such as a nail or screw in the tread. Tread punctures are the typical repair case for kits like this.

Which vehicles does it suit?
Repair kits of this type are used on cars, trucks and RVs. Check the tire size and type against your vehicle before use.

What should I do if the puncture is on the sidewall?
Sidewall damage is generally not suited to a puncture repair kit of this type, so having a tire shop check the tire is the safer choice.

Key Features

• Rubber Repair Nails — The rubber nails fill punctures with a gap inner diameter under 5mm (0.2 in). Insert the nail into the tire wound to seal it without leaking air.

Product Specifications

• Material: Rubber
• Colour: Black
• Purpose: Tire repair
• Scope of application: Small nails fill breaches within 0.1mm (0.004 in)-3mm (0.12 in); large nails fill breaches within 3mm (0.12 in)-5mm (0.2 in)
• Size: Large nail about 5.3*11.7cm (2.1 × 4.6 in); small nail about 6.8*12.7cm (2.7 × 5 in)

What It Is / How It Works

This tire repair nail kit is a set of black rubber nails used to plug punctures in tires. The nails come in small and large sizes so that different puncture widths can be filled.

Who It's For / Use Cases

Drivers of cars, motorcycles, trucks, buses and agricultural vehicles who want to handle a small tire puncture themselves, without a trip to a repair shop, will find this type of puncture repair kit useful.

How to Use / Care

1. Use the nails on automobile, motorcycle, truck, bus and agricultural tires.
2. Insert the nail into the tire puncture to fill the wound.

How to Choose

Choose the nail size by the width of the puncture. Small nails fill breaches within 0.1mm (0.004 in)-3mm (0.12 in) and large nails fill breaches within 3mm (0.12 in)-5mm (0.2 in).

Frequently Asked Questions

Can these nails be used on motorcycle tires?
The nails can be used on motorcycle, automobile, truck, bus and agricultural tires.

What size puncture does each nail fill?
Small nails fill breaches within 0.1mm (0.004 in)-3mm (0.12 in) and large nails fill breaches within 3mm (0.12 in)-5mm (0.2 in). The nails fill gaps with an inner diameter under 5mm (0.2 in).

What are the nails made of?
They are made of rubber with high temperature resistance, high hardness and high wear resistance.

How many nails come in a pack?
The package includes 10, 20 or 30 tire repair rubber nails, depending on the option you select.

Does a repair need to be done again?
It has a long service life, and the repair is done once with no second repair required.

Key Features

• Rubber Construction — The rubber is high-temperature resistant, hard and wear resistant.
• Close Tire Fit — It fits closely to the tire, sealing the wound and keeping water out of it.
• Two Nail Sizes — Small nails fill breaches within 0.1mm (0.004 in)-3mm (0.12 in) and large nails fill breaches within 3mm (0.12 in)-5mm (0.2 in).
• Do-It-Yourself Repair — The nail is inserted straight into the tire wound, so you can repair the tire yourself without going to a repair shop.

Product Specifications

• Colour: Black
• Material: Rubber
• Water Resistance Level: Water resistant
• Small Nail Breach Range: 0.1mm (0.004 in)-3mm (0.12 in)
• Large Nail Breach Range: 3mm (0.12 in)-5mm (0.2 in)
• Large Nail Size: About 5.3*11.7cm (2.1 × 4.6 in)
• Small Nail Size: About 6.8*12.7cm (2.7 × 5 in)
• Part number: 21-10PCS

What It Is / How It Works

These tire repair rubber nails are used to fill a puncture in a tire. The set has 10 pieces, with small and large nails for different breach sizes.

Who It's For / Use Cases

Tire repair rubber nails suit drivers and riders who want to fix a small tire puncture without going to a shop. They are made for automobiles, motorcycles, trucks, buses and agricultural tires.

How to Use / Care

1. Pick the nail size that matches the breach: small nails for 0.1mm (0.004 in)-3mm (0.12 in) and large nails for 3mm (0.12 in)-5mm (0.2 in).
2. Insert the nail into the tire wound.

How to Choose

Choose the nail size by the opening in the tire. Small nails suit breaches within 0.1mm (0.004 in)-3mm (0.12 in), and large nails suit breaches within 3mm (0.12 in)-5mm (0.2 in).

Frequently Asked Questions

What nail sizes are included?
The small nails fill breaches within 0.1mm (0.004 in)-3mm (0.12 in) and the large nails fill breaches within 3mm (0.12 in)-5mm (0.2 in). The large nails are about 5.3*11.7cm (2.1 × 4.6 in) and the small nails are about 6.8*12.7cm (2.7 × 5 in).

What is the nail made of?
It is made of rubber with high temperature resistance, high hardness and high wear resistance.

Can it be used on motorcycle tires?
It is made for automobiles, motorcycles, trucks, buses and agricultural tires, so motorcycle tires are included.

Is it water resistant?
The nails are water resistant and fit closely to the tire, so water is kept out of the wound.

Key Features

• Two Nail Sizes — The small nails fill breaches from 0.1mm (0.004 in) to 3mm (0.12 in), and the large nails fill breaches from 3mm (0.12 in) to 5mm (0.2 in).

Product Specifications

• Piece Count: 30 pcs
• Material: Rubber
• Colour: Black
• Large Size: About 5.3*11.7cm (2.1 × 4.6 in)
• Small Size: About 6.8*12.7cm (2.7 × 5 in)

What It Is / How It Works

These are tire repair rubber nails, a set of black rubber nails for patching punctures in tires. Each nail is inserted into the tire wound to fill the gap, so a small puncture can be repaired without a trip to an auto repair shop.

Who It's For / Use Cases

Tire repair nails suit drivers and riders who want to handle a small puncture themselves, without a trip to an auto repair shop. The nails can be used on automobile, motorcycle, truck, bus and agricultural tires, so owners of trucks, buses and farm vehicles can keep a set on hand for the same kind of repair.

How to Use / Care

1. Choose a small nail for wounds from 0.1mm (0.004 in) to 3mm (0.12 in), or a large nail for wounds from 3mm (0.12 in) to 5mm (0.2 in).
2. Insert the nail into the tire wound.
3. Use the nails on automobile, motorcycle, truck, bus or agricultural tires.

How to Choose

Pick the nail size by the size of the puncture: the small nails suit openings up to 3mm (0.12 in), and the large nails suit openings from 3mm (0.12 in) to 5mm (0.2 in). Measure the opening before choosing so the nail matches the wound. The store offers 10, 20 and 30 piece mixes, so choose the count that fits how many repairs you expect to make.

Frequently Asked Questions

What sizes do the nails come in?
The small nails are about 6.8*12.7cm (2.7 × 5 in) and fill breaches within 0.1mm (0.004 in) to 3mm (0.12 in). The large nails are about 5.3*11.7cm (2.1 × 4.6 in) and fill breaches within 3mm (0.12 in) to 5mm (0.2 in).

How many nails are in the set?
The set contains 30 pieces. The store offers 10-piece and 20-piece mixes as well.

Does the set need a battery?
No battery is included, and the nails are used by hand.

What material are the nails made of?
The nails are made of rubber and are black.

Can these be used on trucks and buses?
Yes. The nails can be used on automobile, motorcycle, truck, bus and agricultural tires.

Key Features

• One Piece Per Pack — The pack holds one piece, so each order is a single rim cleaning tool.

Product Specifications

• Piece Count: 1 pcs

What It Is / How It Works

Tire rim cleaning tools are accessories made for cleaning the metal rims of car wheels, the outer surface where road grime and brake dust build up over time. This tire rim cleaning tool is sold for that purpose, as one piece per order.

Who It's For / Use Cases

Car owners who wash their own vehicles and want a dedicated tool for the wheel rims will find this type of accessory useful.

How to Use / Care

1. Use it to clean car wheel rims as part of your regular wheel cleaning.

How to Choose

Review the piece count in Product Specifications so you know how many tools you are getting before you order.

Frequently Asked Questions

How many pieces come in one order?
It comes as 1 piece, as shown in the Piece Count row of Product Specifications.

What surface is this tool made to clean?
It is made for cleaning car wheel rims, the metal part of the wheel that the tire mounts on.

Is this tool a cleaner or a cleaning tool?
It is a cleaning tool for wheel rims. The cleaner you use is your own choice, since no cleaning solution is included with this tool.

Key Features

• Tire Valve Adapter — It connects your pump to car, motorcycle, and bicycle tire valves for quick inflation on the go.
• Ball Pump Needle — The metal needle is approx. 3.75 cm / 1.5 in long and fits standard ball valves on sports equipment and inflatable toys.
• Balloon Nozzle — The plastic nozzle has a metal thread and helps fill latex and foil balloons faster without air loss.
• Broad Pump Fit — The general size design fits compressors, electric air pumps, and almost any hand pump.
• Compact Storage — The small pieces store easily in a pouch, drawer, or pump case.

Product Specifications

• Material: Metal and Plastic
• Color: Gold and Black
• Dimensions: 0.7 cm
• Outside diameter: 7 mm
• Inside diameter: 4 mm
• Kit contents: 1 metal tire valve adapter, 1 metal ball pump needle, 1 plastic balloon nozzle with metal thread

What It Is / How It Works

This is a tire valve adapter and inflation kit, a set of nozzles and needles that connects an air pump to the valve of an inflatable item. The kit includes a metal tire valve adapter, a metal ball pump needle, and a plastic balloon nozzle with a metal thread. Each piece is made from metal and plastic, so the set covers tires, sports balls, toys, and balloons from one case.

Who It's For / Use Cases

Home users who want one set to inflate basketballs, soccer balls, and gym balls with an electric pump will find the kit useful. Bicycle owners who top off tires at home or on a ride, and parents who fill balloons and inflatable pool toys for parties, are the other typical buyers for this set.

How to Use / Care

1. Pick the tire valve adapter for car, motorcycle, or bicycle tire valves.
2. Pick the metal ball pump needle for basketballs, soccer balls, gym balls, and other sports equipment.
3. Pick the plastic balloon nozzle for latex and foil balloons.
4. Attach the piece you need to your electric or hand pump before inflating.
5. Store the small pieces together in a drawer, pouch, or tool bag when not in use.

How to Choose

Start with the opening you need to fill. Tire valves use the adapter, balls and toys use the needle, and balloons use the nozzle. Next, match the piece to your pump type, since the general size design works with electric pumps, compressors, and hand pumps. If you fill a mix of tires, balls, and balloons, one kit covers all of them.

Frequently Asked Questions

Will this work with my Xiaomi air pump?
It is designed to work with Xiaomi air pumps and many other compatible electric inflators.

Can I use this to inflate car tires?
Yes. The metal tire valve adapter connects the pump to standard car tire valves for quick inflation.

Is the ball needle long enough for a basketball?
Yes. The needle is approx. 3.75 cm / 1.5 in long, the standard size for inflating basketballs and other sports balls.

What material are the pieces made from?
The pieces are made of metal and plastic.

Does it work with hand pumps or only electric pumps?
It works with both. The general size design fits compressors, electric air pumps, and almost any hand pump.

Key Features

• Four-Piece Set — The package includes 4 tire valve caps, so one covers each valve stem.
• Multiple Color Options — The caps come in blue, red, silver, gold, black, pink, purple and titanium.

Product Specifications

• Piece Count: 4 pcs
• Material: Plastic
• Color: Blue, red, silver, gold, black, pink, purple, titanium
• Package included: 4 tire valve caps

What It Is / How It Works

Tire valve caps are small covers that sit over the valve stem on a wheel. This set has four plastic caps.

Who It's For / Use Cases

Tire valve caps suit car owners who want a finishing touch on their wheels, and motorcycle owners who want matching accents on their valve stems. They are a simple way to change the look of a wheel without other parts.

How to Use / Care

1. Fit one cap over each valve stem to decorate the wheels.

How to Choose

Choose a color that suits your wheels, since the caps come in several finishes. Check that the pack holds the number of caps you need. This set has four caps.

Frequently Asked Questions

What material are the valve caps made of?
They are made of plastic, and the set includes four caps.

How many caps are in a pack?
The package includes 4 tire valve caps.

Which colors are available?
The caps come in blue, red, silver, gold, black, pink, purple and titanium.

Key Features

• Built-in O-ring Seal — The built-in O-ring rubber seal helps prevent air leaks and helps keep tire pressure stable.
• Dirt and Water Guard — The durable plastic body is made to resist water and dust, protecting the valve stem.
• Easy-Grip Texture — The textured surface lets you screw each cap on and off by hand.
• 20-Cap Pack — The pack includes 20 valve caps, so you can cap several tires or keep spares on hand.

Product Specifications

• Material: Plastic and rubber
• Size: 13 × 10 mm (0.51 × 0.39 in)
• Piece Count: 20 pack
• Color: Black, Gray, Red, Green, Yellow
• Valve Type: Schrader

What It Is / How It Works

Valve caps are small covers that screw onto the valve stem of a tire. They sit over the valve opening to help keep dirt, dust, and moisture away from the air valve inside.

Who It's For / Use Cases

Valve caps suit car owners who want to keep tire valve stems clean and protected. Truck and SUV drivers, motorcycle riders, and cyclists can use them on their own tires. Multi-vehicle households and fleets often buy a bulk pack so that spares are ready. DIY drivers who check tire pressure at home may also find a spare set useful.

How to Use / Care

1. Screw each cap onto the valve stem by hand, using the textured grip.
2. Unscrew the cap by hand when you need to check air pressure or add air.
3. Keep unused caps as spares for future use.
4. Replace any cap that is cracked or missing its rubber seal.

How to Choose

Start with the valve type. Choose caps for Schrader valves, which are the common type on cars, trucks, SUVs, motorcycles, and bicycles. Next, pick a color that suits your style or helps you tell your tires apart at a glance. Finally, choose a pack size based on how many tires you need to cover and how many spares you want to keep.

Frequently Asked Questions

Do these valve caps fit all vehicles?
They are designed to fit standard Schrader valves on cars, trucks, SUVs, motorcycles, bicycles, ATVs, and electric cars.

What is the O-ring for?
The O-ring rubber seal fits tightly around the valve stem to reduce the risk of air leaks and keep out moisture.

Are the caps easy to install?
The caps screw on by hand, and the textured grip makes fitting and removal quick.

How many caps come in the pack?
The pack includes 20 valve caps. You get enough to cover multiple vehicles or keep extras for future use.

What colors are available?
The caps come in Black, Gray, Red, Green, and Yellow.

Do these caps work on bicycle tires?
They fit standard Schrader valves commonly found on bicycles, as well as cars and motorcycles.

Key Features

• Plastic Build — Made of plastic, the caps help keep dirt and dust off tire valves.
• Built-In O Ring — The O rubber ring inside each cap forms a tight seal that helps prevent air loss and keeps moisture out.
• Textured Grip — The textured surface lets you screw each cap on or off by hand, without tools.
• Universal Size — The universal size fits most cars, SUVs, trucks, motorcycles, and bicycles.
• Multiple Quantity Options — Quantity options give you enough caps for several vehicles or spare replacements.

Product Specifications

• Material: Plastic
• Color: Black, Grey
• Size: 1.3 x 1.0 cm / 0.51 x 0.39 inch
• Pack options: 4, 10, 25, or 50 pieces

What It Is / How It Works

Tire valve stem caps are small covers that screw onto the valve stem to keep dirt, dust, and debris away from the valve. These valve stem caps are made of plastic and have an O rubber ring built in.

Who It's For / Use Cases

Valve stem caps suit drivers of cars, SUVs, trucks, motorcycles, and bicycles who want a cover for each tire valve. Drivers who check tire pressure often at the pump may appreciate a cover that keeps the valve clean. Anyone who has lost a valve cap and needs an affordable, universal replacement set will find a multi-pack useful.

How to Use / Care

1. Fit one cap onto each tire valve stem on a car, SUV, truck, motorcycle, or bicycle.
2. Turn each cap by hand until it is snug on the stem; no tools are needed.
3. Keep a spare cap from the pack ready for any valve cap that is lost.
4. Use the extra caps from a multi-pack as replacement spares for each vehicle.

How to Choose

Choose black or grey to match your wheels or to keep a low-profile look.

Pick a pack of 4, 10, 25, or 50 depending on how many vehicles you own and how many spare caps you want on hand.

Frequently Asked Questions

Will these valve caps fit my car?
Yes, they have a universal size that fits most standard tire valve stems on cars, SUVs, trucks, motorcycles, and bicycles.

Do the caps help prevent air from leaking?
The O rubber ring inside each cap creates a tight seal that helps reduce air loss and keeps moisture out.

Can I install them without tools?
You can screw them on by hand. The textured surface gives a good grip, so no tools are needed.

What colors come in the pack?
Black and grey. You can choose either color to match your wheels or keep a low profile.

How many caps come in one package?
You can choose from 4, 10, 25, or 50 pieces, depending on how many vehicles and spares you need.

Key Features

• Valve Core Remover — It is a tyre valve core remover for removing and fitting valve cores.
• Valve Puller — The set includes a tyre valve puller for pulling valve stems.
• Snap-In Valve Stems — It fits snap-in valve stems.
• 4-Way Repair Tool — It is a 4-way tyre valve repair tool.

Product Specifications

• Material: Brass + Plastic + Steel
• Pieces per set: 33 pieces
• Water Resistance Level: Water resistant
• 4-port Valve Tool: 4.7 × 3.4 cm (1.85 × 1.34 in)
• Tire Valve Cap: 1 x 1.2 cm (0.39 × 0.47 in) (D x H)
• Spool: Height 1.9 cm (0.75 in)

What It Is / How It Works

This tyre valve stem core remover tool kit is a set of small hand tools for working on tyre valves. Valve core remover kits are used to unscrew and refit the small core inside a valve stem, and to pull or repair valve stems when a tyre needs attention.

Who It's For / Use Cases

Tyre valve tool kits suit car owners, motorcycle riders and cyclists who want to check, service or replace valve cores and valve stems themselves.

How to Use / Care

1. Use tyre valve tool kits to remove and replace valve cores and to work on valve stems.

How to Choose

Start with the valve work you do. If you service car, motorcycle or bicycle tyres, a set with a core remover, a puller and a repair tool covers the common jobs. Compare the piece count and the tool types listed for the set, then check the materials, which are brass, plastic and steel.

Frequently Asked Questions

What is in the set?
The set has 33 pieces. It includes a valve core remover, a valve puller, a 4-way tyre valve repair tool and valve stem cores.

What materials are the tools made of?
The tools are made of brass, plastic and steel.

Key Features

• Lightweight Design — The alloy body is lightweight, so it is easy to carry on a keyring.
• Corrosion Resistance — The material offers corrosion resistance for everyday carry.
• Bottle Opener Function — It can be used as a bottle opener, so it works as a multi-function keychain.
• Bayonet Quick Release — A very tight bayonet structure keeps attached items from falling off.

Product Specifications

• Material: Titanium alloy
• Size: 8 cm (3.15 in)
• Package Included: 1x Titanium alloy keychain
• Compatible models: Man【SMQ】

What It Is / How It Works

This titanium alloy key ring is a small metal keychain with a bayonet clip. It has enough room to hold a key chain, tiny carabiners and other EDC items.

Who It's For / Use Cases

Key rings in this style suit people who want a compact metal attachment point for everyday carry, such as keys, a belt loop or a grocery bag handle. Outdoor and EDC users often look for small metal keychains they can clip to gear and keep within reach.

How to Use / Care

1. Use the keychain as a bottle opener.

How to Choose

Choose a key ring by size first. Compact metal key rings suit a few keys, while larger ones fit more attachments. Material also matters: titanium alloy is a common choice for metal key accessories where a light feel and corrosion resistance are wanted. Pick a clip style that matches where you plan to attach it.

Frequently Asked Questions

What size is it?
It measures 8 cm (3.15 in).

What material is it made of?
It is made from titanium alloy, described as lightweight, high strength and corrosion resistant.

Does it use electricity or a battery?
No. It is a non-electric metal keychain and uses no battery.

Can it be used to open bottles?
Yes. It can be used as a bottle opener and also holds keys.

How much can it hold?
The ring offers large space to hold a key chain, tiny carabiners and EDC items.

What comes in the package?
One titanium alloy keychain.

Key Features

• Titanium Alloy Build — It is made of titanium alloy, so the ring is built from one metal material.

Product Specifications

• Material: Titanium Alloy
• Color: Gray
• Size: M

What It Is / How It Works

This key ring is a small metal loop for holding keys together and clipping on everyday carry items. Key rings like this are often used with a bag strap, belt loop or car key set, which makes them a common choice for everyday carry and small outdoor gear.

Who It's For / Use Cases

Key rings suit people who want a simple metal way to keep a set of keys in one place and clip them to a bag, belt or car key set. They fit everyday carry, short outdoor trips and anyone who likes to keep a few small tools or tags on one ring.

How to Use / Care

1. Use it to hold your keys together or to clip on a small everyday item.

How to Choose

Choose a key ring by how many keys or small items you need to carry and where you plan to clip it. Check the Size row in Product Specifications to see the size this ring is listed in, then compare it with the size of your key bundle. Gray is the color listed for this ring, so pick it if that shade suits your keys or bag.

Frequently Asked Questions

What is the ring made of?
It is made of titanium alloy.

What color is it?
It is gray.

What is a key ring used for?
A key ring holds a set of keys together and lets you clip the set to a belt loop, bag strap or car key fob.

Who is a key ring good for?
Key rings suit people who carry several keys every day and want them kept in one place that clips to a belt or bag.

Key Features

• Titanium Alloy Body — It is made of titanium alloy, a metal often used for compact outdoor tools.
• Stainless Steel Parts — Stainless steel is another material in the build, alongside the titanium alloy.

Product Specifications

• Color: Gray
• Size: M

What It Is / How It Works

This key ring is a small metal ring for holding keys and small items together.

Who It's For / Use Cases

Key rings suit people who want a metal keychain for everyday carry, such as clipping keys to a belt loop, bag strap or backpack. Outdoor users who keep small tools on a ring may also find this type of accessory useful for daily carry.

How to Use / Care

1. Use it as an EDC outdoor tool keychain to hold your keys for everyday carry.

How to Choose

Start with material. The listed materials are titanium alloy and stainless steel, so pick the one that matches the look you want for your keys. The listed color is gray and the listed size is M, so confirm that size fits the keys or tools you plan to attach before you buy.

Frequently Asked Questions

What is this key ring made of?
It is made of titanium alloy. The listed materials also include stainless steel.

What color is it?
It is gray.

What size is it?
It is listed in size M.

Is it an electric product?
No. It is a metal key ring with no electrical parts, so it needs no battery.

Key Features

• UV and Heat Blocking — It blocks UV rays and reduces the interior temperature in summer.
• Umbrella-Shaped Elastic Design — Its umbrella-shaped, elastic build is compact and easy to carry.
• Titanium Silver Coating — The polyester taffeta is finished with a titanium silver coating.
• Wear and Aging Resistance — The materials offer wear, aging and impact resistance.

Product Specifications

• Color: Silver
• Material: Polyester taffeta with titanium silver coating
• Length: 145 cm (57.1 in)
• Width: 80 cm (31.5 in)
• Item Weight: 160 g (5.6 oz)
• Placement on Vehicle: Windshield
• Vehicle Types: Sedan, SUV, Hatchback, Utility Vehicle
• Package: 1 car front window sunshade

What It Is / How It Works

This car windshield sunshade is a foldable parasol that sits in the front window of a car to block sunlight. It is made of polyester taffeta with a titanium silver coating and uses an umbrella-shaped, elastic design that is compact to carry.

Who It's For / Use Cases

Car windshield sunshades suit drivers who park outdoors in summer and want a cooler cabin when they return. They also suit passengers who ride with the front glass exposed to strong sun, and anyone who wants a compact cover that stores easily in the car when it is not in use.

How to Use / Care

1. Use it to block sunlight and UV rays from the front window when the car is parked.

How to Choose

Start with the vehicle type, since the listed types are sedan, SUV, hatchback and utility vehicle. If storage space matters, a foldable design is easier to keep in the car. Consider how much sun and heat the car usually faces when you choose.

Frequently Asked Questions

What is the sunshade made of?
It is made of polyester taffeta with a titanium silver coating.

What size is it?
It measures 145 cm (57.1 in) long and 80 cm (31.5 in) wide and weighs 160 g (5.6 oz).

Which vehicles does it suit?
The listed vehicle types are sedan, SUV, hatchback and utility vehicle, and it is placed on the windshield.

What does the pack contain?
The pack contains one car front window sunshade.

How does it help in summer?
It blocks UV rays and reduces the interior temperature in summer.

Key Features

• Custom Fit — Floor mats are made to order for your specific car model and production year, so they match the contours of your vehicle's floor.
• Material Blend — These mats combine synthetic fiber with artificial leather, offering a surface that is easy to clean and durable for daily use.
• Driver Protection — The mats are designed to help protect the main driver's area from dirt, spills, and wear.

Product Specifications

• Brand: TITIPLER
• Material: Synthetic fiber, artificial leather
• Dimensions: According to model
• Type: Mats & Carpets

What It Is / How It Works

These are custom car floor mats, also known as auto carpets, designed to fit the floor of your vehicle. They are made from a blend of synthetic fiber and artificial leather, and are tailored to your specific car model and production year.

Who It's For / Use Cases

Car floor mats are for drivers and passengers who want to keep the interior of their vehicle clean and protected from everyday messes like dirt, mud, and spills. They are especially useful for people who drive frequently, have families, or want to maintain the resale value of their car. Custom-fit mats are ideal for those who prefer a tailored look and coverage that matches their specific vehicle.

How to Use / Care

1. Remove the existing floor mats from your vehicle and clean the floor surface thoroughly to remove any dirt or debris.
2. Place the new custom floor mats in the appropriate positions, ensuring they align with the contours of the floor and any existing retention hooks.
3. Press down on the mats to secure them in place, making sure they lie flat and do not interfere with the pedals or seat movement.
4. Check that the mats are properly positioned and adjust if necessary. To clean, shake out loose dirt or vacuum, and wipe with a damp cloth as needed.

How to Choose

When choosing custom car floor mats, consider the material: synthetic fiber and artificial leather are common options that offer durability and ease of cleaning. Think about the coverage you need—some mats cover only the front row, while others extend to the rear. If you have special requirements, such as a third-row mat, you may need to contact the seller to arrange a custom order.

Frequently Asked Questions

Are these floor mats custom-made for my car?
Yes, these floor mats are custom-made for your car. After you place an order, you need to leave a message with your car model and production year so the seller can create mats that fit your vehicle precisely.

What materials are these mats made of?
The mats are made from a combination of synthetic fiber and artificial leather, which provides a durable and easy-to-clean surface for everyday use.

Does the price include mats for all rows?
The price covers mats for two rows. If you need mats for three rows, you will need to contact the seller and pay an additional amount.

How do I order mats for a different car model?
If you need mats for a car model that is not listed, you can contact customer service to arrange a custom order. The seller can make floor mats for your specific vehicle.

What information do I need to provide when ordering?
After making a payment, you should leave a message with your car model and production year. This helps the seller create mats that fit your vehicle correctly.

Key Features

• Spring Flap Structure — The spring structure inside the flap lets the elbow closure be loaded.
• Anti-Corrosion Steel — It is made of anti-corrosion stainless steel.
• Six-Lock Set — The set includes 6 spring buckle tension locks, sold together.
• Small Elbow Lock — The small elbow lock can be used on ordinary boxes and instrument boxes.

Product Specifications

• Size: 4.6 × 2.07 cm (1.8 × 0.81 in)

What It Is / How It Works

Toggle latches of this kind are spring-loaded catches that hold a lid or case shut and are opened by hand. They are used on boxes, cases and crates where the lid needs a simple, secure closure.

Who It's For / Use Cases

Toggle latches of this kind suit people who store tools, supplies or small goods in boxes and cases and want a simple lid catch. They are often chosen for home workshops, office supply storage and retail stockrooms where a box needs to stay closed between uses.

How to Use / Care

1. Use the small elbow lock on ordinary boxes or instrument boxes.
2. Use it on boxes and similar containers for home, office or store storage.
3. Load the elbow closure through the spring flap.

How to Choose

Start with the box or case you need to close. Compare the lock size with the spot on the lid or body where it will sit, since each lock measures 4.6 × 2.07 cm (1.8 × 0.81 in). Count how many latches the job needs, because the set includes six.

Frequently Asked Questions

How big is one lock?
It measures 4.6 × 2.07 cm (1.8 × 0.81 in).

How many come in a set?
The set includes 6 spring buckle tension locks, sold together.

Can it go on an ordinary box?
It can be used on ordinary boxes and instrument boxes.

What does the spring flap do?
The spring structure inside the flap lets the elbow closure be loaded.

Where can it be used?
It can be used for boxes and similar containers at home, in an office or in a store.

Key Features

• Transmitter Compatibility — It is for RC model radio transmitters, including FrSky X9E, X9DPSE, QX7S, X10 and X12S, and Futaba T6J, T8J, T8FG, 14SG, 10C, 12FG, 16SZ and 18SZ/MZ.
• Handle and Position Options — It comes with a long or short handle, in a two-position or three-position version. The long-handle option is a reset type.
• Replacement Upgrade — It can replace the original red seat-type switch on FrSky X9D, X7, X9lite, RadioLink and FlySky transmitters.

Product Specifications

• Material: Metal
• Piece Count: 1 piece
• Handle Options: Long or short handle, two-position or three-position
• Power: No battery
• Compatible models: FrSky X9E X9D QX7 Futaba T6J T8J T8FG 14SG 10C 12FG 16SZ RadioMaster Jumper

What It Is / How It Works

This is a toggle switch for RC model radio transmitters. Toggle switches like it are small control parts that set a transmitter control to a chosen position, and handle length and position count decide how that control is operated.

Who It's For / Use Cases

Toggle switches for RC transmitters suit hobbyists who maintain their own radios and want a replacement control part for a compatible transmitter. They fit people who prefer to repair a radio at home rather than send it away, and people who want a different handle length or position count on an existing transmitter.

How to Use / Care

1. Use it to replace the toggle switch on a compatible RC model radio transmitter.
2. Choose the handle length and position count that match the control you are replacing before you fit it.

How to Choose

Choose the handle length first, since both long and short handle options are offered, so pick the one that matches the control you want. Next, pick two positions or three positions to match the switch you are replacing.

Frequently Asked Questions

Which transmitters is it for?
It is for RC model radio transmitters, including FrSky X9E, X9DPSE, QX7S, X10 and X12S, and Futaba T6J, T8J, T8FG, 14SG, 10C, 12FG, 16SZ and 18SZ/MZ. It can replace the original red seat-type switch on FrSky X9D, X7, X9lite, RadioLink and FlySky transmitters.

Does it come with mounting hardware?
Each switch comes with customized screw nuts.

How many pieces come in a pack?
One piece per pack.

What is it made of and which certifications does it carry?
It is made of metal and carries CE, FCC and RoHS marks.