Key Features

• Plastic Trim Restoration — Stated for fading and whitening on plastic trim, with the aim of bringing back a like-new color.
• Genuine Leather Use — Listed for use on the surface of genuine leather.
• Size Options — Offered in 30ml, 50ml, and 100ml volumes.
• Sponge Application — Applied by spreading the cleaner onto a sponge first, then working it across the surface.

Product Specifications

• Color: Black
• Material: Leather
• Item Volume: 30ml, 50ml, 100ml
• Type: Leather & Upholstery Cleaner

What It Is / How It Works

This leather and upholstery cleaner is sold in 30ml, 50ml, and 100ml volumes and is described for restoring faded plastic trim and treating genuine leather surfaces. Cleaners in this category are usually applied by hand with a soft applicator, so the bottle size you pick should match how much surface you plan to work on.

Who It's For / Use Cases

Leather and upholstery cleaners suit car owners and home users who want to refresh dull leather seats, faded interior trim, or worn leather furniture. They also fit people who prefer a hand-applied approach with a sponge and want a cleaner that handles both plastic trim and leather surfaces.

How to Use / Care

1. Use the cleaner to restore faded plastic trim and bring back its like-new color.
2. Apply the product onto the sponge.
3. Apply evenly on the surface of genuine leather.

How to Choose

Choose the size that matches your task. The 30ml and 50ml volumes suit smaller jobs such as a single trim panel or a small leather area, while the 100ml volume suits larger interior surfaces. Pick the volume based on how much leather or trim you plan to cover, and consider how often you expect to use the cleaner.

Frequently Asked Questions

What surfaces is this cleaner intended for?
It is described for restoring whitened or faded plastic trim and for use on the surface of genuine leather.

How is the cleaner applied to leather?
Apply the product onto a sponge first, then spread it evenly across the genuine leather surface.

Key Features

• Plastic Webbing Material — The webbing is made of plastic, so it can be woven into furniture frames and panels.
• Rectangular Pattern — The roll has a rectangular pattern that can be cut to the length each project needs.
• Warm Water Softening — Soak the cane webbing in warm water for 15-30 minutes before use to soften it for handling.
• Cut-to-Size Application — Cut the webbing to size with scissors and attach it with an upholstery stapler.

Product Specifications

• Material: Plastic
• Dimensions: 55 cm (21.7 in)
• Pattern: Rectangle
• Color: Primary color / coffee / Yellow

What It Is / How It Works

This plastic webbing roll is a furniture repair and decoration material. It is intended for indoor and outdoor furniture weaving, DIY lampshade projects and hanging chair decoration.

Who It's For / Use Cases

Crafters and furniture restorers who want to re-weave a seat, lampshade or cabinet door usually work with webbing strips like this. Hobbyists building DIY decor pieces can cut a roll to the length each project requires.

How to Use / Care

1. Remove the tie, then soak the cane webbing in warm water for 15-30 minutes before use.
2. Cut the webbing to size with scissors.
3. Attach the cut webbing with an upholstery stapler.

How to Choose

Narrower strips suit small drawer fronts and smaller frames, while wider strips cover chair seats and larger panels more quickly.

Frequently Asked Questions

What material is the webbing made of?
It is made of plastic and comes as a rectangular-pattern roll. Soak it in warm water for 15-30 minutes before use so it softens for weaving.

Can the webbing be customized?
Yes. Customization is available by leaving a message with customer service, who will work out the details with you.

What width and length does the roll come in?
The width range is 40-55cm. The stated dimension is 55 cm (21.7 in).

What colours are available?
The colour options are primary colour, coffee and yellow. Lighting can make photos look slightly different from the actual roll.

Key Features

• Wireless CarPlay — It converts a wired CarPlay connection to wireless CarPlay for iPhone users and supports wireless Android Auto for Android phones.
• Preloaded Streaming Apps — YouTube, Netflix, Spotify and IPTV apps come preloaded on its Android system. App downloads are not supported, and a touch screen is required.
• Quick Pairing and Voice — Pairing takes just seconds, and the original car controls stay available. Hi Siri and Hey Google voice control are supported.
• 2GB RAM, 16GB ROM — It has 2GB DDR3 RAM and 16GB eMMC ROM for its Android system.

Product Specifications

• Connector Type: USB Type A
• Functionality: Wireless CarPlay, Wireless Android Auto
• Size: 3.15 × 1.77 × 0.39 in
• Phone Requirement: iPhone 6 or later (iOS 10+) or Android 11 or later
• Car Requirement: Original car needs to support wired CarPlay

What It Is / How It Works

This Android AI box is a wireless CarPlay and Android Auto adapter. It plugs into a car that already has wired CarPlay and lets a compatible phone connect wirelessly.

Who It's For / Use Cases

Drivers with a compatible iPhone or Android phone who want wireless CarPlay or Android Auto in a car that already supports wired CarPlay will find this box useful.

How to Use / Care

1. Use it to connect your phone wirelessly to CarPlay or Android Auto in your car.

How to Choose

Start with the car. Its head unit must already support wired CarPlay, since this box adds the wireless connection.

Frequently Asked Questions

Which phones does it support?
It supports iPhone 6 or later on iOS 10+ for wireless CarPlay, and Android phones on Android 11 or later for wireless Android Auto.

Which cars can use it?
The car must support wired CarPlay. It is not suitable for a vehicle that only has wireless CarPlay or wireless Android Auto, a vehicle that only has wired Android Auto, or a vehicle that does not support wired CarPlay.

Does it work with Huawei, Xiaomi or Redmi phones?
No. Huawei, Xiaomi and Redmi phones are not supported.

Can I download apps to it?
App downloads are not supported. YouTube, Netflix, Spotify and IPTV apps are preloaded, and a touch screen is required.

What warranty does it have?
It has a one-year global warranty and lifetime technical support, with online upgrades and issue reporting.

Key Features

• Iridium Electrode — Each plug uses an iraurita (iridium alloy) electrode that delivers a strong, consistent spark for reliable ignition.
• Multi-Fit OEM Numbers — The set covers OEM part numbers 41-156, 41-993, 41-114, 41-110, 41-101, 41-103, 41-109, and 41-108 for a wide range of GM vehicles.
• Direct Interchange — These plugs are a direct interchange for OEM part number 12620540, simplifying replacement.
• Flat Mounting Base — A flat mounting base helps ensure a secure fit in the cylinder head.
• 8-Piece Set — The 8-piece set covers a full engine replacement in one purchase.

Product Specifications

• Material: Iraurita (iridium alloy)
• Condition: New
• Mounting Base: Flat
• Interchange Part Number: 12620540
• Package: Bubble bags + inner box + outer carton

What It Is / How It Works

This set of 8 iridium spark plugs covers multiple OEM part numbers including 41-156, 41-993, 41-114, 41-110, 41-101, 41-103, 41-109, and 41-108. It is designed for a wide range of vehicles from Buick, Chevrolet, Cadillac, GMC, and Hummer. Each plug is built with an iridium electrode for reliable ignition and long service life.

Who It's For / Use Cases

Spark plug sets like this suit DIY car owners replacing worn plugs on their Buick, Chevrolet, Cadillac, GMC, or Hummer. Mechanics and garages needing a multi-fit set for common GM engines will find the coverage useful. Vehicle enthusiasts performing routine maintenance can keep their engine running at peak efficiency.

How to Use / Care

1. These plugs are a direct replacement for OEM part number 12620540 and come ready to install in compatible engines.
2. Check your engine requirements against the OEM numbers 41-156, 41-993, 41-114, 41-110, 41-101, 41-103, 41-109, or 41-108.
3. The spark plugs are new, but check the gap with a gapping tool before installation to match your vehicle's specifications.

How to Choose

Match the OEM part numbers in the Product Specifications to your engine's requirements before ordering. Confirm the electrode material and set quantity fit your maintenance plan. For multi-vehicle owners, a set covering several OEM numbers reduces the need for separate purchases.

Frequently Asked Questions

Will these spark plugs fit my 2015 Chevrolet Tahoe?
These plugs are compatible with many GM vehicles including the Chevrolet Tahoe. Check your engine requirements against the OEM numbers 41-156, 41-993, 41-114, 41-110, 41-101, 41-103, 41-109, or 41-108.

How many spark plugs come in this set?
This set includes 8 spark plugs, enough for a complete replacement on most V8 engines or a full set for four- and six-cylinder engines.

Can I use these plugs in a Cadillac Escalade?
These plugs are listed for Cadillac vehicles and cover multiple OEM part numbers including 41-110 and 41-108, which are commonly used in Escalade models.

What is the electrode material made of?
The electrode is made of iraurita, an iridium alloy that provides long-lasting performance and consistent spark output.

Key Features

• Realistic Modeling — This dashboard decoration features realistic modeling that adds a playful touch to your car's interior.
• Fine Workmanship — Crafted with fine workmanship, this piece is designed to look neat and well-made.
• Compact Size — Measuring about 5. 5 × 4 cm (2. 17 × 1. 57 in), this small figure fits easily on a dashboard without taking up much space.
• PVC Material — Made from PVC, this decoration is lightweight and easy to place in different spots.

Product Specifications

• Material: PVC
• Size: 5.5 × 4 cm (2.17 × 1.57 in)
• Piece Count: 1 pc
• Applicable Places: Car dashboard, study

What It Is / How It Works

This is a small PVC figure designed as a car dashboard decoration. It features a playful, plump shape and is meant to add a fun accent to your vehicle's interior or a shelf in your study.

Who It's For / Use Cases

Dashboard decorations like this suit people who want to personalize their car's cabin with a bit of character. They also work well as a small desk or shelf accent for a study, adding a whimsical touch to everyday spaces.

How to Use / Care

1. Choose a flat, stable spot on your dashboard or shelf where the figure won't obstruct your view or interfere with driving.
2. Wipe the surface clean and dry to help the figure stay in place.
3. Place the figure on the surface and adjust its position until it looks the way you want.
4. To keep it looking good, dust it occasionally with a soft, dry cloth.

How to Choose

When picking a dashboard decoration, consider the size so it doesn't block your view or take up too much space. Think about the material—PVC is lightweight and easy to clean.

Frequently Asked Questions

What is this decoration made of?
It is made of PVC, which is a common plastic material for small decorative figures.

How big is this figure?
It measures about 5. 5 × 4 cm (2. 17 × 1. 57 in), making it a compact accent for a dashboard or shelf.

Where can I place this decoration?
It is suitable for a car dashboard or a study, so you can use it in your vehicle or on a desk or shelf at home.

How many pieces come in a pack?
Each pack includes one piece.

Key Features

• Waterproof & Sunscreen — Made from PVC environmental protection material, these car stickers are waterproof and sunscreen, so they hold up to outdoor conditions without fading.
• Easy to Apply — The stickers are easy to install—just paste them on, and they are suitable for all vehicles.
• Customizable Look — Personalization is available, letting you add your own touch to the design.
• Versatile Design — The creative plus-horsepower and 100HP scratch designs add a playful, racing-inspired look to any vehicle.

Product Specifications

• Material: PVC environmental protection material
• Color: As shown
• Personalization: Yes

What It Is / How It Works

These are decorative car stickers, often called 'pull flowers,' that add a creative, racing-inspired look to your vehicle. The set includes plus-horsepower and 100HP scratch designs, made from PVC environmental protection material that is waterproof and sunscreen.

Who It's For / Use Cases

Car stickers suit drivers who want to personalize their vehicle's appearance without a permanent commitment. They are great for car enthusiasts, racing fans, or anyone looking to add a playful touch to their ride. Because they are easy to remove, they are also a good option for leased vehicles or for those who like to change their car's style frequently.

How to Use / Care

1. Clean the body surface where you plan to apply the sticker and keep it dry.
2. Determine the placement location, then slowly paste the sticker while scraping with a tool and uncovering the bottom paper.
3. After pasting, scrape and press repeatedly to ensure good adhesion, then remove the transparent transfer film.
4. For large stickers, use the wet method: clean the body, sprinkle water evenly, then position and adjust before pressing out water and bubbles.

How to Choose

When choosing car stickers, consider the size of the design relative to your vehicle's surface. Larger stickers may require the wet application method for easier positioning, while smaller ones can be applied dry. Finally, pick a design that matches your personal style, whether it's subtle or bold.

Frequently Asked Questions

What material are these car stickers made of?
They are made from PVC environmental protection material, which is waterproof and sunscreen, so they resist fading from sun exposure.

Are these stickers easy to remove?
Yes, you can gently scrape the edge with your fingernail and tear it off completely. It should not leave marks or damage the paint. In cold weather, heating the adhesive with a hair dryer can make removal easier.

Can I customize the stickers?
Yes, personalization is available for these stickers, allowing you to add your own touch to the design.

What tools do I need for installation?
You may need rags, sprinklers, scrapers, or credit cards to help with the application process.

Product Specifications

• Piece Count: 1 pc

What It Is / How It Works

Car armrest pads are padded covers that rest on the armrest of a vehicle's center console. Padded armrest covers add a softer surface between the elbow and a hard console armrest, and this car armrest pad is sold for that use.

Who It's For / Use Cases

Car armrest pads suit drivers and passengers who rest an elbow on the center console and want a softer surface there.

How to Use / Care

1. Use it to cover the central console armrest in your vehicle.

Frequently Asked Questions

How many pieces come in one pack?
The pack holds one piece, so each order contains a single armrest pad.

Is it sold as a set?
No. The pack contains a single piece.

What does a padded armrest cover do?
Padded armrest covers add a softer surface between the elbow and a hard console armrest. They are a simple accessory for the console area of a vehicle.

Key Features

• Soft Plush Feel — Made with artificial plush for a soft, cozy touch.
• Seasonal Comfort — Designed for autumn and winter use to add warmth.
• Crafted Knit Weaving — Crafted with a knit weaving technique.
• Fiber Filling — Filled with fiber for added cushioning.

Product Specifications

• Material: Cotton, sponge, artificial plush
• Dimensions: 133 cm (52.4 in)
• Applicable Season: Autumn and winter
• Craft of Weaving: Knit
• Filling: Fiber

What It Is / How It Works

This is a car seat cover set, including seat covers and a cushion pad. It is designed to protect your vehicle's seats while adding a plush layer of comfort.

Who It's For / Use Cases

Car seat covers are for drivers and passengers who want to keep their seats clean and add a softer surface. They are especially useful for families with kids or pets, or for anyone who spends a lot of time on the road.

How to Use / Care

1. Place the seat cover over the car seat, aligning it with the headrest and backrest.
2. Smooth out any wrinkles and secure the straps or hooks underneath the seat.
3. Position the cushion pad on the seat bottom for extra support.

How to Choose

When choosing seat covers, consider the material for comfort and durability, the size to ensure a proper fit for your vehicle, and the season—plush materials are ideal for colder months.

Frequently Asked Questions

What materials are these seat covers made of?
The seat covers are made from a combination of cotton, sponge, and artificial plush, offering a soft and cushioned feel.

What are the dimensions of the seat cover?
The seat cover measures 133 cm (52. 4 inches) in length, which is designed to fit most standard car seats.

Are these seat covers suitable for summer?
These seat covers are designed for autumn and winter use, providing warmth and comfort during colder seasons.

Key Features

• Armrest Fit — It is designed for cars with flip-cover armrests.
• Double-strap Design Keeps — The double-strap design keeps the holder steady with anti-shake stability.
• Bottom Refill Opening — The bottom opening lets you refill tissues without fully taking the holder apart.
• Waterproof Inner Bucket — The waterproof inner bucket helps prevent leaks and can be rinsed clean.

Product Specifications

• Material: Plush, PP cotton
• Size: about 25x22x28cm
• Weight: about 400g
• Usage scenarios: Car

What It Is / How It Works

This 2-in-1 car tissue holder and trash can has a charming cartoon bear appearance. It is crafted from plush and PP cotton and is designed to be waterproof, leakproof and stain resistant.

Who It's For / Use Cases

Car tissue holders with a trash bin suit drivers and passengers who want tissues and waste kept in one place inside the cabin. Plush cartoon designs also suit people who want a soft, decorative accent in a car, workplace or home office.

How to Use / Care

1. Place it in a car to keep tissues within reach and rubbish in one place.
2. Refill tissues through the bottom opening.
3. Rinse the inner bucket to clean it.

How to Choose

Start with your armrest. The holder is designed for cars with flip-cover armrests, so confirm your armrest flips up before buying. Next, check the size of about 25x22x28cm against the space you plan to use, and consider whether you want a single tissue and trash unit for the cabin.

Frequently Asked Questions

Does it fit cars with flip-cover armrests?
It is designed for cars with flip-cover armrests, and its double-strap design keeps it steady.

How do I refill the tissues?
Refill through the bottom opening, so the holder does not need to be fully taken apart.

Does it hold liquid?
The waterproof inner bucket helps prevent leaks, and it can be rinsed clean.

What is it made of and how big is it?
It is made of plush and PP cotton. It measures about 25x22x28cm (9.84x8.66x11.02 inches) and weighs about 400g.

Who is it suitable for?
It is suitable for adults and is used in cars.

Key Features

• Soft Plush Material — Crafted from soft plush material, this dice pendant adds a touch of coziness to your car interior.
• Lightweight Design — Its lightweight design ensures it won't add unnecessary weight to your car.
• Cute Dice Style — The cute dice design makes it a fun and unique accessory for car enthusiasts.
• Versatile Decoration — Perfect for decorating your rearview mirror or any car interior, enhancing its aesthetic appeal.

Product Specifications

• Material: Plush

What It Is / How It Works

This is a plush dice-shaped pendant designed to hang from your car's rearview mirror or elsewhere in the interior. It adds a playful, cozy touch to your vehicle's decor.

Who It's For / Use Cases

Car enthusiasts who enjoy personalizing their ride with fun accessories will appreciate this dice pendant. It's also a great choice for anyone looking to add a soft, cozy accent to their vehicle's cabin.

How to Use / Care

1. Attach the pendant's loop to your rearview mirror or another suitable spot in the car.
2. Adjust the hanging position so it doesn't obstruct your view while driving.

How to Choose

When choosing a car pendant, consider the material for softness and durability, the design to match your style, and the size to ensure it doesn't interfere with your driving visibility.

Frequently Asked Questions

What material is this dice pendant made of?
It is made of plush material, giving it a soft and cozy feel.

Is this pendant heavy?
No, its lightweight design ensures it won't add unnecessary weight to your car.

Where can I hang this pendant?
It is perfect for decorating your rearview mirror or any car interior.

Key Features

• Superfine Fiber — The mitt is made of superfine fiber.
• Plush Fiber Surface — The plush microfiber fibers are meant for sensitive paintwork, clear plastic, polished metals and glass.
• Varied Fiber Lengths — The fibers come in a range of lengths that together glide over the surface and lift grime away from it.

Product Specifications

• Material: Superfine Fiber

What It Is / How It Works

This car wash mitt is a hand-held cleaning mitt for washing car bodywork, trucks, boats and motorcycles. It is designed for auto detailing.

Who It's For / Use Cases

Car wash mitts suit car owners who wash their own vehicles by hand at home, at a driveway wash or at a self-service bay. They also suit people who clean boats or motorcycles and want a glove-style tool while working across panels and body curves.

How to Use / Care

1. Use it to wash car bodywork by hand.

How to Choose

Choose a wash mitt by the surface you plan to clean. Plush fiber mitts are used on sensitive paintwork, clear plastic, polished metals and glass. Pick the mitt that matches the surfaces you plan to clean.

Frequently Asked Questions

What is the mitt made of?
It is made of superfine fiber.

Which surfaces is it for?
It is for sensitive paintwork, clear plastic, polished metals and glass. It is made for auto detailing on cars, trucks, boats and motorcycles.

How do the fibers clean the surface?
The fibers come in a range of lengths. Together they glide over the surface and lift grime away from it.

Key Features

• Fixed Panda Hands — The hands are fixed and fit models with small gear levers.
• Clear Monitor View — Once installed, adjust its position so it does not block the view of the monitor.
• Mini Panda Doll — It is a small, cute plush panda doll.

Product Specifications

• Package Contents: 1 car wiper ornament
• Size: 5.1 × 8 cm (2 × 3.15 in); 3.15inch.; 13 cm (5.1 in)

What It Is / How It Works

This plush panda car wiper ornament is a small decorative doll for the car interior. It arrives packed in a bubble bag with no retail box.

How to Use / Care

1. Place the ornament on the car wiper and adjust its position after installation so it does not block the view of the monitor.

Frequently Asked Questions

Which cars does it fit?
It fits models with small gear levers.

Does it block the view?
After installation, adjust its position so it does not block the view of the monitor.

What comes in the package?
It comes as one car wiper ornament, packed in a bubble bag with no retail box.

Key Features

• Panda Shape — The panda-shaped design gives the car interior a playful look.
• Shoulder Belt Cover — It is worn over the seat belt across the shoulder.

Product Specifications

• Material: Plush
• Dimensions: Approx. 23*6cm (9.1 × 2.36 in)
• Included: 1 seat belt shoulder protector

What It Is / How It Works

This plush seat belt shoulder sleeve is a panda-shaped cover that goes over the car seat belt. One seat belt shoulder protector is included.

How to Use / Care

1. Place the sleeve over the shoulder part of the car seat belt.
2. It can be used on a school bag strap.

How to Choose

Compare the listed size, about 23 by 6 cm (2.36 in), with the belt or strap you plan to cover. Plush material suits buyers who want a soft, decorative cover rather than a hard shell. Choose it for car use or for a school bag strap, based on where you plan to use it.

Frequently Asked Questions

What is it made of?
It is made of plush material in a panda-shaped design.

How big is it?
The listed size is approximately 23*6cm (9.1 × 2.36 in).

What comes in the package?
One seat belt shoulder protector is included.

What can it be used on?
It is made for use in cars and on school bags.

Key Features

• Approximate Weight — It weighs approximately 60 grams (2.1 oz).

Product Specifications

• Material: Plush resin
• Weight: Approximately 60 grams (2.1 oz)
• Piece Count: 1 pc

What It Is / How It Works

Rearview mirror pendants are small decorative charms that hang from the mirror inside a car. This automotive rearview mirror decorative pendant is a plush resin charm for the car's interior.

Who It's For / Use Cases

Rearview mirror pendants suit car owners who want a playful touch inside the cabin.

How to Use / Care

1. Use it to decorate your car's rearview mirror.

How to Choose

Pick a design that matches your taste, such as a turtle or panda shape from the cartoon animal range. Look at the material and weight rows in Product Specifications to judge how the pendant will feel and hang.

Frequently Asked Questions

What is the pendant made of?
It is made of plush resin, as listed in the material row of Product Specifications.

How much does it weigh?
It weighs approximately 60 grams (2.1 oz).

How many pieces come in one pack?
The pack contains 1 pc.

Key Features

• Plush Material — It is made of plush, a soft material for the covers.
• Two-Piece Pack — The pack has 2pcs, so you get two covers together.
• Shoulder Pad Design — It is a shoulder pad for the seat belt, so it sits over the strap at the shoulder.

Product Specifications

• Material: Plush
• Piece Count: 2pcs
• Colour: Black and pink

What It Is / How It Works

These seat belt covers are shoulder pads for a car seat belt. Seat belt covers are worn over the shoulder strap of a belt to add padding where it crosses the shoulder. They are sold as a 2pcs set in black and pink.

Who It's For / Use Cases

Seat belt covers suit drivers and passengers who want padding where the belt rests on the shoulder. They are a simple accessory for car interiors. It is for adults, youth and kids, so the same type of cover can be chosen for different riders.

How to Use / Care

1. Place the cover over the shoulder part of a seat belt to pad it.

How to Choose

Choose the cover by the person who will wear the belt. Adult, youth and kid seat belts sit differently across the shoulder, so pick the group that matches the rider. Check the material and color you prefer, since the set is plush in black and pink.

Frequently Asked Questions

What is the cover made of?
It is made of plush. The pack has 2pcs.

Who is it for?
It is for adults, youth and kids.

What colors does it come in?
The covers are black and pink.

Is it a shoulder pad for the seat belt?
Yes. It is a shoulder pad for the seat belt, made of plush and sold as a 2pcs pack.

Who makes it?
The brand is cochebar.

Key Features

• Plush Material — The plush surface gives the belt a soft, padded cover where it crosses the shoulder.
• Shoulder Belt Protection — It is made to protect the shoulder area from the seat belt.

Product Specifications

• Material: Plush
• Piece Count: 2 pcs
• Size: 25 × 6 cm (9.8 × 2.36 in)
• Color: Black, Pink

What It Is / How It Works

These plush seat belt covers come as 2 pcs and measure 25 × 6 cm (9.8 × 2.36 in).

Seat belt covers are fabric sleeves that sit over the shoulder part of a car seat belt.

How to Use / Care

1. Use it to cover the shoulder part of the seat belt where it crosses the body.

How to Choose

Choose by color and piece count. Black is sold as 1 pc or 2 pcs, and pink as 2 pcs.

Pick the option that matches your interior and how many covers you need.

Frequently Asked Questions

What material are the covers made of?
They are made of plush.

How many pieces does each option include?
The piece count depends on the color: Black 1pc, Pink 2pcs or Black 2pcs.

What size is each cover?
Each cover measures 25 × 6 cm (9.8 × 2.36 in).

What colors are available?
The covers come in black and pink.

Key Features

• Plush Winter Warmth — The plush surface is made for cold-weather driving, so the rim feels softer in winter.
• Non-Slip Surface — The surface is non-slip, so the cover helps your hands stay put on the rim while you drive.

Product Specifications

• Type: Steering wheel cover

What It Is / How It Works

This car steering wheel cover is a fabric sleeve that stretches over the rim of the wheel. Covers of this type add a softer surface to the rim. This one has no inner ring, so it covers the rim only, and its elastic edge helps it stay on the wheel.

Who It's For / Use Cases

Steering wheel covers like this one suit drivers who spend long hours behind the wheel in cold weather and want a softer, non-slip grip on the rim. They are a practical choice for anyone who prefers a warmer feel in winter than a bare wheel gives.

How to Use / Care

1. Place the cover over the rim of the steering wheel so it covers the full rim.
2. Keep the cover on the wheel while driving so the warm, non-slip surface stays in place on the rim.

How to Choose

Choose the cover by the rim diameter of your steering wheel. Measure the rim before you buy, then match it to the size the cover is made for.

If you drive mostly in cold months, a plush surface suits the season. If you want a cover with no inner ring that covers only the rim, this style fits that choice.

Frequently Asked Questions

Does this cover have an inner ring?
It has no inner ring, so it covers the rim only.

Is it suitable for winter driving?
The plush, warm surface is made for cold-weather driving, so the rim feels softer on the hands in winter.

How does the cover stay in place?
The elastic edge holds it on the rim, and the surface is non-slip while you drive.

How do I choose the right size?
Measure the rim diameter of your steering wheel and match it to the size the cover is made for before you order.

Who is this cover for?
It is for drivers who want a softer, warmer rim in cold weather and a non-slip grip while driving.

What It Is / How It Works

Car washing gloves are hand-worn wash mitts used to wash vehicles by hand. These are car washing gloves for washing a car or a motorcycle by hand, so the hand does the washing instead of a sponge or cloth.

Who It's For / Use Cases

Car washing gloves suit car owners who wash their own vehicles by hand at home. Motorcycle owners who wash their bikes by hand can use the same kind of glove for that job, and the gloves suit anyone who prefers a soft, hand-held wash mitt over a sponge.

How to Use / Care

1. Put the gloves on and wash the car by hand.
2. Use the gloves for motorcycle washing as well, wiping the bike by hand.

How to Choose

Choose the gloves for the job you have: washing a car by hand, or washing a motorcycle by hand. Pick the option that includes the extra items you want for the wash.

Frequently Asked Questions

What are these gloves for?
They are car washing gloves for washing a car by hand. The gloves can also be used to wash a motorcycle by hand, since motorcycle washing is one of their uses.

Can I wash a motorcycle with them?
Motorcycle washing is one of their uses, so the gloves can be used to wash a motorcycle by hand as well as a car.

What feel do the gloves have?
The gloves have a wool-soft, plush feel that suits hand washing of painted surfaces.

Key Features

• 315MHz Frequency — It operates at 315MHz to match the original TPMS system in the vehicle.
• Pre-Programmed Setup — It comes pre-programmed, which removes the need for complex setup before installation.
• Direct OEM Replacement — It replaces OEM part numbers 42607-06011 and 42607-33011, along with many others.
• Lexus and Toyota Range — It is compatible with a wide range of Lexus and Toyota models, so it works as a spare or replacement part.

Product Specifications

• Sensor P/N: PMV-107J
• Frequency: 315MHz
• Compatible with: 42607-0C010, 42607-0C020, 42607-30030, 42607-35010, 42607-75010, 42607-AD020, 42607-33011, 88974915, 42607-06011, 42607-02010, 42607-34020, 42607-33021, 42607-04010, 42607-AD010, 42607-0E011
• Material: PCBA board and battery
• Quantity: 1 or 4 sensors, depending on the option selected
• Matching requirements: OBD tool for the relearn process

What It Is / How It Works

This is a tire pressure sensor for the tire pressure monitoring system on Lexus and Toyota vehicles. It is a TPMS sensor that replaces the original sensor when the warning light stays on or a sensor needs replacing.

Who It's For / Use Cases

Tire pressure sensors suit vehicle owners and technicians who need to replace a TPMS sensor on a supported car. It is for Lexus owners with ES, GS, GX, IS, or RX models from model years 2005 to 2017, and for Toyota drivers of Corolla, 4Runner, RAV4, Camry, Highlander, or Land Cruiser models.

How to Use / Care

1. Have the sensor installed by a trained professional or tire shop.
2. After installation, use an OBDII tool to complete the relearn process.
3. No programming is needed before installation, because the sensor comes pre-programmed.

How to Choose

Choose a tire pressure sensor by matching the frequency and the part number on the original sensor. This sensor operates at 315MHz, so confirm that your original system uses the same frequency. Use the Part number and Compatible with rows in Product Specifications to check the OEM numbers, then confirm your vehicle's year against the listed ranges before ordering.

Frequently Asked Questions

Do I need to program this sensor before installing it?
No. It comes pre-programmed for the vehicle's make and model. An OBDII tool is used only for the relearn process after installation.

Will this sensor work on a 2008 Lexus RX 350?
Yes. It is compatible with Lexus RX models from 2006-01 to 2038-11, including the 2008 RX 350.

What frequency does this TPMS sensor use?
It operates at 315MHz, which is the standard frequency for many Lexus and Toyota vehicles.

Can I install this sensor myself?
The sensor is a direct fit, but a trained professional is recommended for installation. The relearn process requires an OBDII tool.

Does this sensor fit a Toyota Corolla?
It is compatible with Toyota Corolla models from 2002-09 to 2008-12 and from 2009-01 to 2023-03. Confirm your vehicle's year against those ranges before ordering.

Keep your tires at the right pressure with a simple, reliable TPMS sensor replacement. This PMV-E100 sensor works with a range of popular Toyota and Suzuki models, including the Camry, Corolla, C-HR, Yaris, and Suzuki Swace. It operates at 433MHz and comes pre-programmed for your vehicle, so you can avoid complicated setup steps.

Driving with properly inflated tires improves fuel efficiency and extends tire life. This sensor monitors internal tire pressure and temperature, helping you catch potential issues early. The data is sent directly to your vehicle's dashboard, giving you real-time information without any extra gadgets or screens.

Installation is straightforward for a trained professional. The sensor fits into your existing tire valve assembly and works with your car's original TPMS system. Once installed, you will need to perform a vehicle relearn procedure to sync the new sensor with your car's computer. This can often be done through a stationary relearn, automatic driving cycle, or OBD tool.

Each sensor is built to match the original equipment specifications for your specific make, model, and year. Before ordering, double-check your vehicle's compatibility using the fitment information provided in the listing. If you have questions about the programming process for your car, expert advice is available to help.

Key Features and Benefits

- Pre-programmed for your vehicle that saves you time and avoids the need for manual programming

• 433MHz operating frequency that ensures reliable communication with your car's TPMS system

• Real-time tire pressure and temperature monitoring that helps prevent tire-related issues and improves safety

• Direct replacement design that fits into your existing valve assembly for a hassle-free installation

• Compatible with multiple Toyota and Suzuki models that gives you a flexible solution for different vehicles

Who Is This For

- Toyota owners with a Camry (2018-2022), Corolla (2019-2023), C-HR (2016-2022), Yaris (2019-2020 or 2020-2028), Mirai (2019-2020), or B-Cuv (2021-2029) who need a TPMS sensor replacement

• Suzuki Swace owners (2020-2025) looking for a direct-fit tire pressure sensor

• Drivers who want to maintain proper tire pressure for better fuel economy and longer tire life

• Anyone replacing a faulty or dead TPMS sensor with a pre-programmed unit that matches OEM

specifications

Usage Scenario

Mark noticed his Toyota Corolla's tire pressure warning light stayed on even after checking the air in all four tires. A quick visit to his mechanic confirmed that one of the original TPMS sensors had stopped working. Instead of paying for a costly dealer replacement, Mark ordered a set of PMV-E100 sensors. After a professional installed them and performed the OBD relearn, the warning light turned off. Now Mark can see his tire pressure on the dashboard again and drives with confidence knowing his tires are properly monitored.

Micro Comparison

Unlike universal TPMS sensors that require manual programming and a separate tool, this PMV-E100 sensor comes pre-programmed for your specific vehicle. It saves you the extra step and reduces the chance of setup errors. While some aftermarket sensors may need a complex activation process, this unit works with your car's existing TPMS system and only requires a simple vehicle relearn procedure after installation.

Specifications

Operating Frequency: 433MHz

Part Number: PMV-E100

Replacement Part Numbers: PMV-E100, PMVE100, 42607-53040, 42607-02090, 42607-12020, 42607-02070, 42607-26030, 42607-02050

Package Includes

- 1 or 4 Tire Pressure Sensors (depending on quantity selected)

Why You Will Love It

You get a direct-fit sensor that works with your car without the headache of programming. It restores your dashboard tire pressure display and helps you catch slow leaks before they become a problem. Knowing your tires are monitored gives you one less thing to worry about on every drive.

Questions and Answers

Question: Does this sensor work with my 2020 Toyota Camry?

Answer: Yes, this PMV-E100 sensor is compatible with the Toyota Camry from model years 2018 to 2022.

Question: Do I need to program the sensor before installation?

Answer: No, the sensor comes pre-programmed for your specific vehicle. You only need to perform a vehicle relearn procedure after installation.

Question: What is a vehicle relearn procedure?

Answer: A relearn procedure syncs the new sensor with your car's TPMS module. It can be done through a stationary relearn, automatic driving cycle, or OBD tool, depending on your vehicle.

Question: Can I install this sensor myself?

Answer: Installation is recommended to be performed by a trained professional because it requires dismounting the tire and handling the valve assembly.

Question: How do I know if this sensor fits my car?

Answer: Check the fitment list in the product description for your vehicle make, model, and year. You can also verify by matching your existing part number with the replacement part numbers listed.

This pneumatic cleaning gun is a versatile high-pressure spray tool designed for removing engine oil, dirt, and dust. It works with both air and water, giving you the flexibility to handle a range of cleaning tasks around your garage or workshop.

The dual-purpose design lets you switch between compressed air for blowing away dry debris and water for washing away tougher grime. It is built for practical, everyday use, making it a solid addition to your cleaning equipment.

With an adjustable air pressure feature, you can control the force of the spray to match the job. Whether you are cleaning a car engine or blowing dust off a workbench, this tool helps you get the job done efficiently.

Key Features and Benefits

- Dual-purpose air and water operation that lets you switch between blowing dry dust and washing away wet dirt with the same tool

• Adjustable air pressure that gives you control over spray force for different cleaning tasks

• Engineering plastic body that keeps the gun lightweight and easy to handle during extended use

• Alloy interface and nozzle that provide durability and reliable performance over time

• Palm type handle that offers a comfortable grip and better control while cleaning

• Comes with water pipes for convenient setup and immediate use out of the box

Who Is This For

- Car owners who need to clean engine bays, undercarriages, and wheel wells with high-pressure air or water

• Garage and workshop users looking for a practical tool to blow dust and debris off equipment and work surfaces

• DIY enthusiasts who want a versatile cleaning gun for both wet and dry tasks around the home or shop

Usage Scenario

After a weekend off-road drive, Mike noticed thick mud and grime caked around his truck's engine bay. He grabbed his pneumatic cleaning gun, connected it to his air compressor, and switched to water mode. The adjustable pressure let him start with a gentle rinse to loosen the dirt, then increase to a strong spray to blast away the stubborn oil and mud. Within minutes, the engine compartment was clean and dry, saving him a trip to the car wash.

Micro Comparison

Unlike standard air blow guns that only work with compressed air, this model adds water spray capability for washing away oily and muddy residue. Its adjustable pressure feature gives you more control than basic fixed-pressure guns, making it a more versatile tool for both light dusting and heavy-duty cleaning.

Specifications

- Body Material: Engineering Plastic

• Handle Type: Palm Type

• Interface Material: Alloy

• Nozzle Material: Alloy

• Water Pipes Length: Less than 5m

• Water Spray Type: Water Column

• With Water Pipes: Yes

Package Includes

- 1 x Pneumatic Cleaning Gun

• Water Pipes

Why You Will Love It

This tool saves you time by combining air and water cleaning in one device. You can tackle both dry dust and wet grime without switching tools, making your cleanup routine faster and simpler.

Questions and Answers

Question: Can this gun be used with a standard air compressor?

Answer: Yes, it connects to a standard air compressor for pneumatic operation.

Question: Is the water spray adjustable?

Answer: The air pressure is adjustable, which affects the water spray force as well.

Question: What is the body made of?

Answer: The body is made of engineering plastic, which keeps it lightweight.

Question: Does it come with the water pipes?

Answer: Yes, water pipes are included in the package.

Question: Can I use it to clean my car engine?

Answer: Yes, it works well for cleaning engine oil and dirt with both air and water.

Key Features

• Hall-Effect Gimbals — CNC Hall-effect gimbals give smooth centering and precise stick response.
• EdgeTX Firmware Preinstalled — The radio comes preinstalled with EdgeTX firmware.
• Built-In ExpressLRS — It includes internal ELRS 2.4GHz radio frequency.
• Foldable Antenna, Removable Sticks — Removable stick ends and a foldable antenna make the transmitter easier to pack.
• Channel Trim Buttons — Trim buttons allow easy channel trimming during operation.

Product Specifications

• Model: Pocket Crush
• Weight: 288 g (10.2 oz)
• Physical dimensions: 156.6 × 65.1 × 125.3 mm (6.2 × 2.56 × 4.9 in)
• Operating frequency: 2.400GHz-2.480GHz
• RF power: ELRS: 250mW Max (24dBm)
• Operational voltage: 6.6-8.4v DC
• Display: 128*64 Monochrome LCD
• Operating system: EdgeTX
• Age Range: 14+y

What It Is / How It Works

This remote control transmitter is a handheld radio controller for Vehicles & Remote Control Toys. It measures 156.6 × 65.1 × 125.3 mm (6.2 × 2.56 × 4.9 in) and weighs 288 g (10.2 oz), and it is sold as the Pocket Crush model from RADIOMASTER.

Who It's For / Use Cases

Remote control transmitters like this suit hobbyists who fly or drive RC models and want a compact controller they can carry. Beginners and experienced operators both use radios in this category, and a light, foldable body suits people who travel to flying fields or track days.

How to Use / Care

1. Use the removable stick ends and foldable antenna to shorten the transmitter for carrying.
2. Press the trim buttons to adjust channel trim while you operate your model.

How to Choose

Choose a transmitter by the radio protocol your receiver uses, the number of channels your model needs, and the grip size that feels comfortable during longer sessions. Compare the frequency, RF power and voltage figures in the specifications against your receiver and battery setup before you buy.

Frequently Asked Questions

What voltage does it run on?
It operates on 6.6-8.4v DC and has built-in USB-C QC3 charging.

What kind of display does it have?
It has a 128*64 Monochrome LCD screen.

What operating system does it use?
It runs EdgeTX firmware, which comes preinstalled.

How far can it control a model?
The control distance is rated above 2km at 20dBm.

What age range is it for?
The age range is 14 years and up.

Replace your worn-out or broken center console cup holder with this direct-fit replacement for the Volkswagen Polo 9N. Designed to match the original OEM part numbers 6Q0 858 602, 6Q0858602B, 6Q0858602C, and others, this cup holder restores the convenience of having a secure place for your drinks while driving. It is a simple, practical upgrade that brings your car interior back to its factory condition.

This cup holder is made from durable PP plastic, built to withstand daily use without cracking or fading. The design fits seamlessly into the center console, keeping your beverages within easy reach without taking up extra space. The adjustable mechanism lets you hold cups of different sizes securely, preventing spills on turns or sudden stops. Cleaning is easy, so your car stays looking fresh.

Installation is straightforward for anyone familiar with car interior trim. The cup holder snaps into place as a direct replacement for the original part. No special tools or modifications are needed. Just remove the old unit and clip the new one in. This saves you time and money compared to a dealership repair.

Whether you need a quick fix for a broken part or just want to refresh your car interior, this cup holder delivers reliable performance. It is a quality-tested component that meets OEM standards, giving you peace of mind on every drive. Keep your coffee, water bottle, or soda secure and accessible with this practical replacement.

Key Features and Benefits

- Direct replacement for Polo 9N models from 2002 to 2010 that fits without modification.

• Made from high-quality PP plastic that resists wear and is simple to wipe clean.

• Adjustable cup holder design that secures different drink sizes and prevents tipping.

• OEM standard construction that has passed durability testing for long-lasting use.

• Compact center console placement that keeps drinks convenient without cluttering the cabin.

Who Is This For

- Polo 9N owners whose original cup holder is cracked, broken, or missing.

• Drivers who want an affordable DIY fix instead of an expensive dealer replacement.

• Car enthusiasts restoring a 2002-2010 Polo to its original interior condition.

Usage Scenario

Mark had been driving his 2005 Polo 9N for years without a working cup holder. Every morning commute meant balancing his travel mug between his knees or letting it roll around the passenger seat. After a near-spill on a sharp curve, he decided to fix the problem. He ordered this direct replacement cup holder, popped out the broken unit, and clipped the new one in place in under ten minutes. Now his coffee stays put, and his morning drive is much more relaxed.

Micro Comparison

Unlike universal cup holders that slide around or take up passenger space, this part is specifically molded for the Polo 9N center console. It locks into the factory mounting points, so it stays stable and looks like the original. Compared to a junkyard pull with unknown wear, this is a brand-new part with tested durability and a clean appearance.

Specifications

Material: PP

Item Type: Drinks holders

Item Weight: 0.21 kg / 7.4 oz

Package Includes

- 1x Car Cup Holder

Why You Will Love It

You will love how this simple replacement restores a useful feature your car was meant to have. It is an inexpensive fix that makes every drive more comfortable and less messy. Knowing your drink is secure lets you focus on the road ahead.

Questions and Answers

Question: Will this cup holder fit my 2008 Volkswagen Polo 9N?

Answer: Yes, this cup holder is designed for Polo 9N models produced between 2002 and 2010.

Question: Does this part come with installation instructions?

Answer: No installation guide is included, but it is a simple clip-in replacement for the original unit.

Question: Can I hold a large 32 oz water bottle in this cup holder?

Answer: The adjustable mechanism allows you to press the white button to enlarge the holder for larger cups or bottles.

Question: What is the material of this cup holder?

Answer: It is made from high-quality PP plastic that is durable and easy to clean.

Question: Is this an OEM part?

Answer: This is an aftermarket replacement part that meets OEM standards and matches the original specifications.

Key Features

• Polyester Build — This car seat cover set is made from polyester fabric.
• PE Foam Padding — The covers include PE foam filling for added cushioning.
• Airbag Compatible — Designed to be airbag compatible.
• Easy Install — Features a detachable headrest, solid bench bottom, and split bench backrest for straightforward installation.

Product Specifications

• Material: Polyester
• Color: Bicolor
• Set Piece: 9
• Applicable Season: Four Seasons
• Filling: PE Foam
• Support: Airbag Available

What It Is / How It Works

It includes covers for front and rear seats, along with headrest covers, made from polyester with PE foam padding for comfort.

Who It's For / Use Cases

Car seat cover sets are a practical choice for drivers and passengers who want to keep their original upholstery clean from daily wear, spills, and dirt. They also suit anyone looking to update the look of their car's cabin with a simple, universal fit.

How to Use / Care

1. Remove the headrests from your seats to make installation easier.
2. Slide the seat cover over the top of the seat back and pull it down to cover the entire backrest.
3. Tuck the cover around the seat bottom and secure any straps or hooks underneath.
4. Reattach the headrests and adjust the covers so they sit smoothly without wrinkles.

How to Choose

When selecting a car seat cover set, consider the size and shape of your vehicle's seats. Universal sets are designed to fit most cars, but measuring your seats can help ensure a better fit.

Frequently Asked Questions

Are these seat covers washable?
Yes, the polyester material is washable and breathable, making it easy to clean and maintain through the seasons.

Do the covers work with side airbags?
The set is described as airbag compatible, with a design that includes detachable headrests and split bench backrests to accommodate airbag deployment.

How many pieces are included in this set?
The set includes 9 pieces, covering front and rear seats along with headrest covers.

Will these fit my car?
The covers are universal size and designed to fit most cars, trucks, SUVs, and vans.

Key Features

• Cotton Filling — The padding inside is cotton.
• Nine-Piece Set — It is sold as a 9-piece set.

Product Specifications

• Material: Polyester
• Filling: Cotton
• Set Piece: 9
• Applicable Season: Four Seasons

What It Is / How It Works

Car seat covers are fitted over vehicle seats to protect the upholstery and change the look of the cabin. This set is made of polyester with cotton filling and includes 9 pieces.

Who It's For / Use Cases

Car seat covers suit drivers and passengers who want to protect factory upholstery or give a car, SUV, sedan or van interior a fresh look. Owners who want seat protection for the front and rear seats in one purchase often choose a full set over single pieces.

How to Use / Care

1. Fit the covers on the front and rear seats of a car, SUV, sedan or van.

How to Choose

Start with your seat layout. Count the front and rear seats in your vehicle and check whether the rear bench is one piece or splits, then pick a set that covers those seats. Polyester is a common material for seat covers used every day, and cotton filling adds a padded feel. The set is for use in all four seasons, so it suits year-round driving.

Frequently Asked Questions

What is the set made of?
It is made of polyester, with cotton filling inside.

How many pieces are in the set?
It is sold as a 9-piece set.

Is it for all seasons?
It is for use in all four seasons.

Who makes the seat covers?
The brand is AUTOYOUTH.

Key Features

• PE Foam Filling — The cover has a PE foam filling under its fabric.
• Elastic Loops Hooks — Elastic loops with hooks hold the cover under the seat.
• Adjustable Fit — The cover can be adjusted to sit neatly on the seat for a snug fit.

Product Specifications

• Material: Polyester
• Filling: PE Foam
• Color: Purple, Black, Beige, Gray, Blue, Red
• Placement on Vehicle: Front and Rear
• Applicable Season: Four Seasons

What It Is / How It Works

These car seat covers are a set of seat covers for car seats. The set is made of polyester and covers front and rear seats.

Who It's For / Use Cases

Car seat covers suit drivers who want a protective layer over car seat fabric. They suit owners of cars, SUVs, trucks and vans who want to cover both the front and rear seats.

How to Use / Care

1. Put the rear backrest cover on from left to right.
2. Mark the headrest position on the cover.
3. Cut a small hole at the marked headrest position.

How to Choose

Choose by seat position first. If you want to cover both front and rear seats, pick a set made for front and rear placement. Color is a matter of taste, so pick a shade that suits your car interior. Fabric matters too: polyester is a common seat cover material that many buyers compare for everyday use.

Frequently Asked Questions

Which seats does it cover?
It is made for front and rear seat placement, so it can be used in both rows of a car.

What is it made of?
It is made of polyester and has a PE foam filling.

Which colors does it come in?
It comes in purple, black, beige, gray, blue and red.

Is it made for all seasons?
It is made for four seasons, so it suits use in every season of the year.

Key Features

• Fits Standard Seats — The cover fits all standard car seats.
• Elastic Loops Hooks — Elastic loops with hooks attach the cover under the seat.

Product Specifications

• Material: Polyester
• Filling: Sponge
• Color: Gray, Blue, Red, Black, Beige, Purple
• Compatible With: Fits all standard car seats
• Placement on Vehicle: Front and Rear
• Applicable Season: Four Seasons

What It Is / How It Works

These seat covers are made of polyester with a sponge filling, and they are sold in a set for car seats.

Car seat covers are fabric layers that fit over existing seat upholstery, giving drivers a removable way to change the look of a seat or add a protective layer.

Who It's For / Use Cases

Car seat covers suit drivers and passengers who want a removable fabric layer over their seats, whether for everyday commuting or for a family vehicle that gets daily use. They suit owners of standard car seats who want a simple cover in a choice of colors.

How to Use / Care

1. Lay the rear backrest cover from left to right over the seat back.
2. Mark the headrest position, then cut a small hole for the headrest.

How to Choose

Start by choosing the seats you want to cover, since the set is for the front and rear seats. Check that the cover is for standard car seats before you buy, so the fit matches the seats in your vehicle.

Frequently Asked Questions

Which seats does it fit?
It fits all standard car seats, and it is for the front and rear seats.

What material is it made of?
The covers are made of polyester and have a sponge filling.

Which colors come in?
It comes in gray, blue, red, black, beige, and purple.

Is it for all seasons?
It is for four-season use.

How does the cover stay on the seat?
Elastic loops with hooks attach under the seat to hold the cover in place.

Key Features

• Soft, Rigid Polyurethane — The polyurethane is soft enough not to harm the vehicle's metal yet rigid enough to support it.
• Undercarriage Rail Protection — It protects the undercarriage metal jack point railing that is on most vehicles.
• Paint-Safe Contact — It will not harm painted surfaces.
• Pinch and Bend Prevention — It keeps chassis rails from getting pinched, bent, and broken.
• Side Lifting Use — It is used for side lifting with a standard hydraulic floor jack.

Product Specifications

• Material: Polyurethane, Rubber
• Pack Size: 1, 2 or 4 pieces per pack

What It Is / How It Works

This jack pad adapter is a protective pad for the metal jack point railing on a vehicle's undercarriage. It fits most cars.

Who It's For / Use Cases

Jack pad adapters suit people who lift a vehicle with a hydraulic floor jack for DIY maintenance or at-home oil changes. They also suit repair shops that want a pad kept on hand. Owners who take a pad along in the car for tire changes at shops that may not use these pads will find the portable use practical.

How to Use / Care

1. Place the pad on the undercarriage metal jack point railing to protect it.
2. Lift the side of the vehicle with your standard hydraulic floor jack.
3. Keep one in the glove box to bring along when tires are replaced.
4. Take proper safety precautions when working on a vehicle.

How to Choose

Choose the pack count that matches how often you lift a vehicle. Packs come in 1, 2 or 4 pieces, so one pad suits occasional use, while a 4-piece pack covers several vehicles or a busy shop.

Frequently Asked Questions

What pack sizes are available?
It comes in 1, 2 or 4 pieces per pack.

Does it fit most cars?
It fits most cars. It protects the undercarriage metal jack point railing that is on most vehicles.

Will it damage paint?
It will not harm painted surfaces. The polyurethane is soft enough not to harm the vehicle's metal yet rigid enough to support it.

What is it made of?
It is made of polyurethane and rubber.

Can it be used with a hydraulic floor jack?
Yes. It is used for side lifting with a standard hydraulic floor jack, and it lets you use the jack without damaging your car or its undercarriage.

Key Features

• Soft Yet Rigid — Polyurethane is soft enough not to harm the vehicle's metal, yet rigid enough to support it.
• Jack Point Protection — It protects the undercarriage metal jack point railing that is on most vehicles.
• Paint-Safe Surface — It is made so it will not harm the painted surfaces.
• Side Lifting — It is for side lifting with a standard hydraulic floor jack.
• Chassis Rail Guard — It keeps the chassis rails from getting pinched, bent, or broken.

Product Specifications

• Pack options: 1, 2 or 4 pieces

What It Is / How It Works

This jack pad adapter is a protective pad for the undercarriage metal jack point railing that is on most vehicles. It is used with a hydraulic floor jack so the lift can be made without damaging the car or its undercarriage.

Who It's For / Use Cases

Jack pad adapters suit DIY vehicle maintenance and home oil changes, as well as repair shops that lift cars with a hydraulic floor jack. Drivers who keep a pad in the car for tire changes at shops that do not use these pads may find them useful.

How to Use / Care

1. Place the pad on the undercarriage metal jack point railing when you side lift the vehicle with a standard hydraulic floor jack.
2. Use it for DIY vehicle maintenance or home oil changes to protect the undercarriage while the car is lifted.
3. Keep one in the glove box so it is ready for tire replacements, since some tire shops do not use these pads.
4. Follow proper safety precautions whenever you work on a vehicle.

How to Choose

Choose the pack size that matches how many pads you need; it comes as 1, 2 or 4 pieces. Make sure the pad suits the lifting method you use, because it is made for side lifting with a hydraulic floor jack.

Frequently Asked Questions

What is it used for?
It protects the undercarriage metal jack point railing that is on most vehicles when you lift the car with a hydraulic floor jack.

Will it mark the paint?
It is made so it will not harm the painted surfaces, so it can be used on the car's body without damaging the paint.

How many pieces come in a pack?
Packs come as 1, 2 or 4 pieces, so you can choose the quantity you need.

Which type of jack does it work with?
It is for side lifting with a standard hydraulic floor jack.

Does it protect the rails from damage?
It keeps the chassis rails from getting pinched, bent, or broken, and the polyurethane is soft enough not to harm the vehicle's metal.

Keep your drinks and essentials within reach while lounging by the pool or on the go. This pool water cup hanger clips securely onto railings, providing a handy spot for your beverage, phone, or sunscreen.

Made from durable, UV-resistant plastic, this cup holder is built to withstand sun exposure and regular use. Its lightweight design makes it easy to move from the pool to your car or patio, offering a simple storage solution wherever you need it.

The flexible handle attaches quickly to pool rails, car seat headrests, or other bars without any tools. The flat-bottom support and raised sides help keep your cup stable and prevent spills, so you can relax without worrying about tipping.

Whether you are swimming, sunbathing, or driving, this portable drink rack keeps your items organized and close at hand. It is a practical accessory for anyone who wants a clutter-free space.

Key Features and Benefits

- Effortless attachment that clips onto pool rails, car headrests, or other bars for quick setup

• UV-resistant plastic construction that resists cracking and fading from sun exposure

• Lightweight and sturdy design that holds drinks, phones, and sunscreen without tipping

• Flat-bottom support and raised sides that prevent spills during active use

• Versatile multipurpose use that works for beverages, beer cans, cell phones, and sunscreen

Who Is This For

- Pool owners who want drinks and essentials within reach while swimming

• Drivers looking for an extra cup holder in their car for road trips or daily commutes

• Outdoor enthusiasts who need a portable drink rack for camping, picnics, or patio use

• Anyone who wants to keep their pool deck or car interior organized and clutter-free

Usage Scenario

Sarah loves spending summer afternoons by her above-ground pool. She used to keep her water bottle on the deck, but it often got knocked over or left behind when she jumped in. With this cup hanger, she clips it onto the pool railing in seconds. Now her drink stays upright and within arm's reach, and she even rests her phone in the holder while listening to music. No more trips back to the house for a sip.

Micro Comparison

Unlike bulky poolside tables that take up space and can be knocked over, this cup hanger clips directly onto the railing and stays put. It is more portable than built-in cup holders and works on different surfaces, making it a flexible choice for pools, cars, and patios.

Specifications

Material: Plastic

Circle Hanging Basket Size: Outer Diameter: 81 mm / 3.2 in, Inner Diameter: 76 mm / 3.0 in, Height: 70 mm / 2.8 in

Product Size: 145 x 90 mm / 5.7 x 3.5 in

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x Pool Cup Holder

Why You Will Love It

No more searching for a flat surface or dealing with spilled drinks. This clip-on holder gives you a reliable spot for your beverage and phone, so you can stay relaxed and focused on having fun. It is a simple upgrade that makes pool time and car trips more convenient.

Questions and Answers

Question: Can this cup holder be used on a car headrest?

Answer: Yes, the flexible handle fits around most car headrest posts and seat rails.

Question: Will it hold a large water bottle?

Answer: The inner diameter is 76 mm / 3.0 in, so it fits standard cans, bottles, and cups up to that size.

Question: Is the plastic safe for outdoor use in direct sunlight?

Answer: Yes, the plastic is UV-resistant and designed to resist cracking and fading from sun exposure.

Question: How do I attach it to the pool railing?

Answer: Simply bend the flexible handle and clip it over the top rail of your pool. It stays securely in place.

Question: Can I use it to hold my phone while swimming?

Answer: Yes, the holder is large enough to store a cell phone, sunscreen, or small items safely.