Square LED Top Lights for 1/8 1/10 RC Crawler Axial SCX10 III CJ7 Wraith

Key Features

• Plastic and Metal Build — The housing and lamp shade are plastic, and the mounting base is metal.
• Bright Simulated Lighting — It has a high simulation degree and high brightness, so it suits scale crawler builds.
• A-Pillar Mounting — It mounts directly on the original A-pillar of the SCX10 III CJ-7, and it can be installed on a roll cage or other plastic hard car shell.
• Receiver or ESC Power — Power connects from the receiver or directly from the ESC, on a 5-7.4V (2S LiPo) supply with a JST interface.
• Compact Size — It measures 14 × 14 × 18 mm (0.55 × 0.55 × 0.71 in) and weighs 12.8 g (0.45 oz).

Product Specifications

• Material: Plastic+Metal
• Scale: 1/8, 1/10
• Intended Use: Front and rear spotlights, bumper lights, roof spotlights
• Vehicle Type: Cars
• Age Range: 14+y
• Working voltage: 5-7.4V (2S LiPo)
• Interface: JST interface
• Dimensions: 49 mm (1.93 in)
• Size: 14 × 14 × 18 mm (0.55 × 0.55 × 0.71 in)
• Weight: 12.8 g (0.45 oz)
• Compatible models: 1/8 1/10 RC Crawler Axial SCX10 III CJ7 Wraith Simulation DIY

What It Is / How It Works

This is a square LED top light, a spotlight for RC crawler bodies in the 1/8 and 1/10 scale range. Lights of this type are usually fitted to the body of a scale crawler to add front, rear, bumper or roof lighting.

Who It's For / Use Cases

Lights of this type suit scale crawler hobbyists who build or customize a rig and want working lights on the body, and owners who prefer a simple lighting upgrade for a bumper or roof position.

How to Use / Care

1. Mount the lamp holder directly on the original A-pillar of the SCX10 III CJ-7.
2. Fit it to a roll cage or other plastic hard car shell as an alternative mount.

How to Choose

Start by matching the scale: this light is sized for 1/8 and 1/10 RC crawlers, so check your chassis against those scales before you buy. Look at the mounting point on your body, because the lamp holder is designed for the A-pillar position and roll cage or hard shell mounting. Confirm your power set-up offers 5-7.4V (2S LiPo) with a JST connection, since the light uses a JST interface.

Frequently Asked Questions

What scale is it for?
It is for 1/8 and 1/10 scale RC crawlers, including the Axial SCX10 III CJ-7 and Wraith.

What is it made of?
It has a plastic housing and transparent lamp shade, with a metal mounting base.

How is it powered?
It runs on 5-7.4V (2S LiPo) and takes power from the receiver or directly from the ESC through a JST interface.

Can it be mounted on a roll cage?
It mounts directly on the original SCX10 III CJ-7 A-pillar, and it can be installed on a roll cage or other plastic hard car shell.

How big and heavy is it?
It measures 14 × 14 × 18 mm (0.55 × 0.55 × 0.71 in) and weighs 12.8 g (0.45 oz).