Brass Snow Foam Lance for Pressure Washer | Compatible with Karcher Elitech Bort AR Bosch

Turn your pressure washer into a professional-grade car cleaning tool with this brass snow foam lance. It creates thick, clinging foam that lifts dirt and grime before you even start scrubbing, making your car wash faster and more effective.

This foam cannon is built around a durable brass manifold and ABS body for long-lasting performance. It connects to most major pressure washer brands using the included adapter, so you can enjoy a deep clean without the need for a separate foam gun. The adjustable nozzle lets you switch from a wide fan spray to a concentrated stream, giving you full control over where the foam goes.

Using less soap than traditional bucket washing, this lance mixes water and shampoo at a ratio of roughly 5:1 to create dense snow foam. The translucent bottle has volume markings so you can see exactly how much solution remains, and the stainless steel suction filter prevents particles from scratching your paint. With a 1-liter bottle capacity, you can cover an entire car without constant refills.

For best results, use with a pressure washer rated between 800 and 5000 PSI. The included extra 1.10mm brass nozzle helps generate thicker foam on lower-pressure electric washers (800–1850 PSI), while the standard 1.25mm nozzle works well for higher-pressure machines. Just swap the nozzle with a flat screwdriver to match your washer's power.

Key Features and Benefits

- Brass and ABS construction that resists corrosion and provides a durable, long-lasting foam lance for regular car washing

• Adjustable fan nozzle that lets you change spray pattern from vertical to horizontal and from a pencil stream to a wide 60-degree fan

• 1-liter translucent bottle with measurement marks so you can mix soap and water accurately and see remaining solution

• Stainless steel suction filter with ball that prevents debris from entering the system and protects your car's paint

• Extra 1.10mm brass nozzle included for generating thick foam on electric pressure washers between 800 and 1850 PSI

• Standard 1.25mm nozzle pre-installed for pressure washers rated between 1850 and 5000 PSI

Who Is This For

- Car owners who want a professional-looking foam wash at home without spending hundreds on a commercial foam cannon

• DIY detailers who need a reliable, adjustable foam lance that works with multiple pressure washer brands

• Homeowners with electric or gas pressure washers between 800 and 5000 PSI looking to improve their car cleaning routine

• Anyone who wants to use less soap while still getting thick, clinging foam that pre-soaks and lifts dirt before scrubbing

Usage Scenario

After a long week of highway commutes, Mark's car was covered in bug residue and road grime. Instead of spending an hour at the self-serve car wash, he attached the brass snow foam lance to his Karcher K5 pressure washer, filled the bottle with a 5:1 water-to-shampoo mix, and covered the entire car in thick foam in under two minutes. The foam clung to the paint, loosening dirt and bugs while he grabbed a microfiber mitt. A quick rinse revealed a spotless finish with zero scratches.

Micro Comparison

Unlike basic plastic foam guns that produce thin, watery suds, this brass snow foam lance uses a precision-machined brass manifold and dual nozzle options to generate dense, professional-grade foam. The adjustable fan nozzle and 1-liter bottle give you more control and coverage than most universal foam cannons on the market.

Specifications

- Body Material: Brass and ABS

• Nozzle Material: Brass

• Interface: G1/4" Female

• Bottle Capacity: 1000 ml / 32 oz

• Spray Pattern: Adjustable vertical and horizontal fan (0° to 60°)

• Required Pressure: 55 bar / 800 PSI minimum

• Maximum Pressure: 350 bar / 5000 PSI

• Maximum Water Temperature: 60°C / 140°F

• Standard Nozzle: 1.25mm (for 1850–5000 PSI)

• Extra Nozzle: 1.10mm (for 800–1850 PSI)

Package Includes

- 1 x Brass body foam nozzle

• 1 x 1-liter bottle with volume calibration marks

• 1 x Suction tube with stainless steel filter

• 1 x Chosen adapter for your pressure washer

• 1 x Extra brass nozzle (1.10mm for 800–1850 PSI washers)

Why You Will Love It

This foam lance saves you time and soap while giving your car a showroom-quality foam bath. The brass build feels solid in your hand, and the adjustable nozzle means you're always in control. It's a simple upgrade that makes every car wash feel like a pro detail.

Questions and Answers

Question: Will this foam cannon work with my Karcher K2 pressure washer?

Answer: Yes, it works with most Karcher K-series pressure washers when you select the correct adapter (adapter A).

Question: How do I get thick foam instead of watery suds?

Answer: Use a mixing ratio of about 1 part car shampoo to 5 parts water. Also, for lower-pressure washers under 1850 PSI, swap to the included 1.10mm nozzle.

Question: Can I use this with a gas pressure washer?

Answer: Yes, the lance works with both electric and gas pressure washers rated between 800 and 5000 PSI.

Question: Is the bottle clear so I can see how much soap is left?

Answer: Yes, the bottle is translucent with measurement marks so you can see the remaining solution at a glance.

Question: What if the adapter I choose does not fit my pressure washer?

Answer: Contact us with a photo of your gun and lance, and we will help you select the correct adapter before you buy.