MUCAR CS90 CS4 CS5 CS6 Car Diagnostic Tool Lifetime Free Update Auto Diagnostics Scanner Auto Vin Reading Car Error Code Reader

What Is Difference Between MUCAR CS4,CS5 CS6 and CS90?

MUCAR CS4 (ABS/SRS/ECM/TCM 4 System+Oil/EPB/SAS/TPMS/ETS 5 Resets Lifetime Free Update)

【4 LIFETIME FREE SYSTEMS DIAGNOSTIC + AUTOVIN + LIVE DATA IN GRAPHING + DATA RECORD AND PLAYBACK】MUCAR CS4 car scanner diagnostic for all cars read and reset Engine, Transmission, ABS and SRS systems, turn off the warning light related. Live data in graphing, record the live data stream for up to 10, simultaneous, PID's. Auto record diagnostic data, recorded data can be played back in text format and graph format. Playback supports two graphs (independent) or 4 PID's graphed.

【5 LIFETIME FREE SPECIAL SERVICE FUNCTIONS + FULL OBD2 MODES TEST +HEALTH REPORT PRINT】MUCAR code scanner can do Oil Reset, Steering Angle Calibration, Electronic Parking Brake,TPMS Reset, Throttle Position Reset. Reset DTC, I/M Readiness Status,O2 Sensor Test, EVAP Test etc. ALL diagnostic data can be record and generate to diagnostic report which can be shared to email then print on computer.

MUCAR CS5 ABS SRS ECM TCM BCM 5 System Lifetime Free Update)

The mucar cs5 professional obd2 scanner tool provide➤ABS SRS ECM TCM BCM System Diagnosis➤All OBD2 Functions➤Lifetime Software Update Via Wi-Fi➤94+ Car Makes➤5 years warranty➤5" Touch Screen ➤Super Faster(Android7.0, 16G B)➤Offline Diagnostic➤Auto VIN Scan ➤4-in-1 Live Data➤One-click Diagnostic Report & Print➤Online Service Feedback➤Google Search DTCs online.

MUCAR CS6 ABS/SRS/ECM/TCM/BCM/TPMS 6 System+Oil/EPB/SAS/ETS/TPMS/ABS/DPF 7 Resets Lifetime Free Update)

1) 6 Systems Diagnostics + Battery Voltage Monitor.

MUCAR CS6 scan tool provides lifetime free diagnoses for ABS, Airbag(SRS), Engine(ECM), Transmission(TCM), Body Control(BCM), Tire Pressure(TPMS), provides standard OBD/EOBD diagnostics and perform a fast scanning and clearing fault codes in seconds. Battery Voltage service monitors realtime battery voltage graphing helps to Judge the state of the battery. Diagnostic Report will help users avoid blind maintenance, offer solution,save time/money.

2) 7 Maintenance Functions for Lifetime Free

Turn off Oil, EPB(Electronic Brake Pad), SAS(Steering Angle), TPMS(Tire Pressure), ABS Bleeding, DPF Regeneration, Throttle Body light. Effectively restore and reset the modules related in seconds after repair, and helps maintain the safety of your vehicle systems. CS6 code reader provides you with more practical solutions at a lower cost. No Extra Fee! Well fits for Technician, garage, used car dealer, auto repair shop, home mechanic, DIY beginner.

MUCAR CS90 ( ECM Systems + 28 Resets Lifetime Free Update )

[ECM Diagnosis]You can diagnose the engine system via ecu obd2 port, support all 10 OBDII test modes, such as live data, O2 sensor test, component test and more;read and clear the engine error codes, find out the exactly problem, repair it, and turn off the MIL engine light.


[28 Reset Services] MUCAR CS90 scan tool for all vehicles has a lifetime free 28+ reset function that helps restore/reset the modules related in seconds after repair and can be upgraded with One-Touch, including OIL(Oil Maintenance Light Reset), SAS(Steering Angle Reset), Injector Coding, IMMO(Anti-theft Matching), DPF Regeneration, EGR Adaption, ABS Bleeding, AdBlue, ETS(Throttle Matching), TPMS Reset, EPB Reset, Tire Reset, AFS Headlamp Reset, Sunroof Initialization, BMS(Battery Reset), Seat Calibration, SRS(Airbag Reset), A/F Reset, Gearbox Reset, Transport Mode, Windows Calibration, Language Change, Suspension Reset, ODO Reset, NOX Sensor Reset, Stop/Start Reset, Coolant Bleeding, Gear Reset(AT Learning).

Full OBD2 Function

1) Read Codes: Knows what and where the problem is according to the DTC and its definition.

2) Clear Codes: Clear/Erases the DTCs and turns off the warning lights after code reading and certain repairs.

3) Live Data: Show the information of continuous data stream from vehicle in live graphic display.

4) Smog Check: You can check if the various emission-related parts or systems on the vehicle are operating properly and make sure the monitors are ready for a smog test.

5) Freeze Frame: Request freeze frame information.

6) O2 Sensor Test: Show the last results of O2 sensor test in graphic display for troubleshooting.

7) Evap Test: Fuel Tank System (Carbon canister test), special control mode requests control of EVAP test.

8) On-board Monitor Test: Read the results of on-board diagnostic monitoring tests for specific components/systems.

9) DTC Code: Built-in DTC lookup library with cause analysis

10) Vehicle Information: Display the information such as VIN (Vehicle identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

4 System Diagnosis(ABS/SRS/ECM/TCM) Lifetime-Free Update

1) Diagnose ECM (Check Engine) System

Quickly determine the cause of the Engine System, and turn off the warning light. It also retrieves current, permanent, and pending codes in the vehicle engine system, What's more, it also shows critical OBD II standard extended data, such as fuel, emissions data, and other real-time manufacturer-specific parameters in the engine system for making sure it works correctly and safely.

2) Diagnose ABS (Anti-lock Braking) System

Read and clear the error code in the ABS and turn off the warning light. It retrieves ABS codes to make braking more smooth, consistent and safe. It also performs live data streams in the ABS that allow the user to monitor and diagnose critical ABS systems to ensure that repairs to this critical system are effective and complete.

3) Diagnose SRS (Airbag) System

Safety restraint system, is made up of impact sensors, a control module, and the airbags themselves, and this diagnostic device can detect every electronic parameter to check its health status.

4) Diagnose TCM(Auto Transmission) System

AT(automatic transmission) system is one of the powertrain control modules,but some issues like un-working electronic accessories and broken transmission computer will keep your transmission light flashing. It's hard to locate the accurate error within limited time. Fortunately, this car error code reader transmission scanner will assist you to have a fast scanning of your vehicle and read the fault code easily, shutting down the warning light within minutes when you finish the repair.

MUCAR CS4 support 5 reset functions,Oil/EPB/SAS/TPMS/Throttle Position Resets Lifetime Free for All Cars

1) Oil Lamp Reset Service: The lightening of the car maintenance light indicates that the vehicle needs maintenance. Reset the mileage or driving time to zero after the maintenance, so the maintenance light will go out and the system will start a new maintenance cycle.

2) EPB Electronic Park Brake Reset: When the brake pad reaches a certain thickness, the brake pad induction wire will be worn. At this time, the wire will send a signal induction wire to the on-board computer to prompt the replacement of the brake pad. After replacing the brake pad, the brake pad needs to be reset, otherwise, the car will continue to alarm. Situations when the reset is required:
a) After the brake pad is replaced and when brake pad wears sensors;

b) When the brake pad indicator lightens;

c) After the brake pad sensor circuit is repaired;

d) After the servo motor is replaced.

3) SAS Steering Angel Sensor Reset:Find the position where the car keeps driving straight. With this position as a reference,the ECU can calculate the accurate angle when the car turns left and right. Generally, after replacing the steering angle position sensor, replacing the mechanical parts of the steering system (such as steering gear, steering column, tie rod ball head, steering knuckle), completing the four-wheel positioning, body repair, etc., it is required to reset the steering angle to zero.

4) TPMS Tire Pressure Monitoring System Reset: When the car tire pressure fault indicator light is on, this function is to reset the tire pressure and turn off the tire pressure fault indicator. If the tire pressure is too low or leaks, replace or install tire pressure monitoring equipment, and replace the tire. When the vehicle with a damaged tire pressure sensor and tire pressure monitoring function has rotated its tires, the tire pressure reset must be carried out after maintenance.

5) Throttle Body Reset: Throttle matching is to utilize the car decoder to initialize the throttle actuator so that the learning value of the ECU returns to the initial state. By doing these, the movement of the throttle (or idle motor) can be more accurately controlled, thus adjust the intake volume. Situations when throttle matching is needed:
a) After replacing the electronic control unit, the relevant characteristics of the throttle operation have not been stored in the electronic control unit.

b) After the electric control unit is powered off, the memory of the electric control unit’s memory is lost.

c) After replacing the throttle assembly, you need to match the throttle.

d) After replacing or disassembling the intake port, the controlling of the idle speed by the coordination between the electronic control unit and the throttle body is affected.

e) Although the characteristics of the idle throttle potentiometer have not changed, the intake volume has changed and the idle control characteristics have changed at the same throttle openings

MUCAR CS4 OBD2 Scanner has a wide vehicle coverage and is compatible with 99% of all car models from the US, Europe, and Asia

For Amercian

for Buick, for Chrysler, for Cadillac, for Chevrolet, for Doge, for AU Ford, for Brazil Fiat, for Brazil GM, for Ford, for GM, for Jeep, for Lincoln, for SGM

For European

for Aston Martin, for Audi, for Alfa Remeo, for Abarth, for BMW, for Bentley, for Bugatti, for Citroen, for DR, for Dacia, for EU Ford, for Ferrari, for Fiat, for GAZ, for Iveco, for IZH, for Jaguar, for Land Rover, for Lamborghini, for Lancia, for Mercedes, for Maserati, for Maybach, for Mini, for Opel, for Opel (south africa), for PAZ, for Peugeot, for Porche, for Renault, for Rover, for Rolls-royce, for SAAB, for Seat, for Skoda, for Smart, for Sprinter, for UAZ, for VAZ, for Volvo, for Volkswagen, for Vauxhall, for ZAZ

For Asian

for Acura, for Daewoo, for Daihatsu, for AU Holden, for Honda, for Hyundai, for Ikco, for Isuzu, for Infiniti, for Kia, for Luxgen, for Lexus, for Mahindra (India), for Maruti (India), for Tata (India), for Mahindra, for Maruti, for Mazda, for Mitsubishi, for MVM, for Nissan, for Nissangtr, for Perodua (Malaysia), for Proton (Malaysia), for Perodua, for Proton, for Renault Samsung, for Saipa, for Ssangyong, for Subaru, for Suzuki, for Toyota, for Tlisuzu, for United Pakistan

Support 19 Languages

English, French, German, Italian, Spanish Portuguese, Japanese, Russian, Dutch, Hungarian, Slovak, Greek, Arabic, Czech, Polish, Chinese Traditional, Korean, Turkish, Danish

One-Click Update to Get New Features

1) Android 6.0
2) 2G RAM
3) 5inch Touch Screen
4) Support Wifi connection
5) 32G Memory
6) Remote Tech
7) Date Report&Print

Powerful Add-on Features

1) Free Update Lifetime

2) Autovin Scan

3) Live Data Steam in Graph

4) Solid Protective Case

Easy To Use

Step 1 : Plug into OBD2 Port

Step 2 : Turn on the Car

Step 3 : Start Diagnosis