Fuel Tank Cap Band Cord | Replacement Tether for BMW Models 16117193372

This fuel tank cap band cord is a direct replacement tether for many BMW models. It keeps your gas cap securely attached to the fuel door so you never leave it behind at the pump. Made from fuel-resistant NBR material, this cord is designed for long-lasting durability.

Over time, the original tether on your BMW can dry out, crack, or snap from repeated use. This replacement cord restores that essential connection, preventing the cap from dangling against the paint or falling onto the ground. It is a simple fix that keeps your fuel system clean and your car looking good.

Installing this tether is a quick DIY task that takes just a few minutes. You do not need special tools or mechanical experience. Just remove the old cord and snap this new one into place. It is a small part that solves a common annoyance for BMW owners.

Designed to match the original factory specifications, this band cord fits the fuel cap assembly on a wide range of BMW 1 Series, 3 Series, 5 Series, 6 Series, 7 Series, X3, X5, X6, and Z4 models. It is a cost-effective way to replace a worn-out part without buying a whole new fuel cap.

Key Features and Benefits

- Made from NBR rubber that resists fuel and oil so the cord stays flexible and does not degrade over time.

• Extremely tear-resistant construction that holds up to frequent bending and pulling at the gas station.

• Measures 13.6 cm / 5.35 in long with a 0.2 cm / 0.08 in width for a precise fit in the factory mounting points.

• Easy to install without any tools so you can replace the broken tether in minutes.

• Helps protect the environment by keeping the fuel cap attached and preventing fuel vapors from escaping.

Who Is This For

- BMW owners whose original fuel cap tether has snapped, cracked, or gone missing.

• DIY mechanics looking for a quick, affordable fix instead of replacing the entire fuel cap assembly.

• Car enthusiasts who want to keep their vehicle in original working condition with a direct replacement part.

• Drivers who frequently use self-service gas stations and want to avoid dropping the cap on the ground.

Usage Scenario

Mark was filling up his E90 3 Series when he noticed the fuel cap dangling by a thin thread. The original rubber tether had finally given out after years of use. He ordered this replacement band cord, and when it arrived, he snapped it onto the cap and the fuel door in under two minutes. Now his cap stays securely attached every time he fills up, and he does not have to worry about losing it or buying a new cap.

Micro Comparison

While some universal tethers are made from generic plastic that can become brittle in cold weather, this replacement cord is made from NBR rubber specifically formulated for fuel resistance and tear strength. It is designed for BMW fuel cap assemblies, so the length and mounting ends match the factory part exactly. This ensures a snug fit that a one-size-fits-all cord cannot provide.

Specifications

Material: NBR

Color: Black

Size: 13.6 cm / 5.35 in x 0.2 cm / 0.08 in (L x W)

Condition: Brand New

Compatible Models (Reference): For BMW 1 Series (E81, E82, E87, E88), 3 Series (E46, E90, E91, E92, E93), 5 Series (E39, E60, E61, F07), 6 Series (E63, E64), 7 Series (E65, E66, E68, F01, F02, F04), X3 (E83), X5 (E70, E71), X6 (E71), Z4 (E89)

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Package Includes

- 1x Fuel Tank Cap Band Cord

Why You Will Love It

You will love how this simple replacement tether solves an everyday annoyance at the pump. It restores your BMW to its original design, keeps your fuel cap clean and secure, and costs a fraction of what a dealership would charge. It is a small upgrade that makes a big difference in your daily driving routine.

Questions and Answers

Question: Will this tether fit my 2006 BMW 325i?

Answer: Yes, this band cord is designed to fit the E90 generation 3 Series, which includes the 2006 325i.

Question: Is the NBR material safe to use with gasoline?

Answer: Yes, NBR is a fuel-resistant rubber that is commonly used for fuel system components.

Question: How do I install this replacement tether?

Answer: Simply remove the old broken cord from the fuel cap and the fuel door, then push the ends of this new cord into the same mounting holes until they snap into place.

Question: Does this fit the BMW X5 E70 model?

Answer: Yes, it is listed as compatible with the BMW X5 E70 and E71 models.

Question: Will this cord work if my original tether is still attached but stretched out?

Answer: Yes, you can replace a stretched or loose tether with this new cord to restore a snug fit.