Car Cup Holder Expander With Phone Holder

Key Features

• Two-in-One Design — It is designed to hold a mobile phone and a cup with a handle at the same time.
• Non-Slip Fixation — Four elastic silicone sheets are designed to hold most cup and bottle sizes, so cups do not shake on bumpy roads.
• Extra Storage Space — It holds cups under 108mm/4.25inch in diameter and phones under 97mm/3.82inch wide, and a mobile phone charging port is reserved.

Product Specifications

• Color: Black
• Dimensions: about 155*121*161mm (6.1 × 4.8 × 6.3 in) / 6.1*4.7*6.3 in
• Weight: about 337g (11.9 oz)
• Compatible With: Bottom fixing device adjusts to an outer diameter of about 100mm/3.94inch
• Cup Diameter: Less than 108mm/4.25inch
• Phone Fit: Phones under 97mm/3.82inch wide and under 24mm/0.94inch thick

What It Is / How It Works

This car cup holder expander is an adapter that fits inside a vehicle's original cup holder. It gives the holder a wider opening and adds a spot for a phone, so a drink and a phone can sit in the same place.

Who It's For / Use Cases

Cup holder expanders suit drivers whose vehicle cup holders are too wide for a smaller cup, bottle or can. They also suit drivers who want one spot in the car for a drink and a phone, and a mobile phone charging port is reserved.

How to Use / Care

1. Install it in the original car cup holder.
2. Adjust the base to a suitable position, set it into the original cup holder, then turn the holder until the fixed key in the base pops out and locks in place.
3. If the original position is not suitable, unscrew the screw, move the screw hole to the front, back, left or right, then screw it on again.
4. Do not install it in a position that affects driving.
5. After drinking, tighten the bottle cap to keep the liquid from shaking out.

How to Choose

Start with the cup or bottle you carry most often and check its diameter against the cup diameter row in Product Specifications. A cup holder expander works best when both sizes fall within those limits and the base can sit securely in your vehicle's original cup holder.

Frequently Asked Questions

What cups and bottles does it hold?
It adapts to cups or bottles with a diameter of less than 108mm/4.25inch, such as thermos cups, beverage bottles, milk tea cups, coffee cups and pop cans.

What size phone does it hold?
It holds a phone less than 97mm/3.82inch wide and less than 24mm/0.94inch thick.

Will it fit my vehicle's cup holder?
The bottom fixing device adjusts to an outer diameter of about 100mm/3.94inch, which suits vehicles with larger original cup holders. Check that the base fits your holder before you install it.

Where can it be installed?
Install it in the original car cup holder. If the original position is not suitable, move the screw hole to the front, back, left or right. Do not install it in a position that affects driving.