2pcs/set 16 LEDs Universal Tail Light Brake Reverse Light for Jeep Wrangler YJ TJ CJ (with Turn Signal)

Key Features

• Bright 16-LED Output — Each light uses 16 LEDs that are brighter than the original lamp, with 12 red LEDs for brake, turn, and tail functions and 4 white LEDs for reverse and turn signal.
• Sealed Housing — The ABS housing and PC lens are fully sealed with epoxy resin to resist moisture, corrosion, sand, dust, and harsh weather.
• Color-Coded Wiring — Four color-coded wires simplify hookup: black for ground, white for reverse, red for brake, brown for tail, and yellow for turn signal.
• Universal 12V Fit — Works with most 12V vehicles and is suited for trucks, trailers, SUVs, RVs, campers, boats, flatbeds, buses, forklifts, and pickups.

Product Specifications

• Type: Tail Light Assembly
• Light Source: 16 LEDs
• Power: 12V
• Location: Rear
• Light Colors: White, red, amber
• Lens Color: Red or smoked
• Piece Count: 2 pcs
• Compatibility: Fits Wrangler YJ TJ CJ, trucks, trailers, vans, boats (not for JK JL models)
• Installation Note: Professional installation recommended; instructions not included; some modifications or drilling may be required.

What It Is / How It Works

This is a pair of universal tail light assemblies with 16 LEDs each. They combine tail, brake, turn signal, and reverse functions in one sealed unit, designed for rear mounting on a variety of 12V vehicles.

Who It's For / Use Cases

These lights suit owners of trucks, trailers, SUVs, RVs, campers, boats, flatbeds, buses, forklifts, and pickups that run on 12V systems. They are a practical replacement for worn or dim rear lights, especially for vehicles used in dusty, wet, or off-road conditions.

How to Use / Care

1. Clean the mounting surface thoroughly so the light sits flat and the seal can do its job.
2. Position the light on the chosen flat area and mark the three bolt holes.
3. Secure the light with the three bolts, then connect the color-coded wires to your vehicle's corresponding circuits.
4. Test all functions—tail, brake, turn, and reverse—before finalizing the installation.

How to Choose

Check your vehicle's voltage (12V is standard) and confirm the mounting area is flat. Decide on the light color you need—white, red, or amber—and whether you prefer a red or smoked lens. Verify that the light's functions match your needs: tail, brake, turn, and reverse. Since some drilling may be required, assess your comfort with modifications or plan for professional installation.

Frequently Asked Questions

What functions do these lights provide?
Each light has 16 LEDs: 12 red LEDs handle brake, turn, and tail functions, while 4 white LEDs handle reverse and turn signal. They do not include license plate lights.

Are these lights waterproof?
Yes, the ABS housing and PC lens are fully sealed with epoxy resin to resist moisture, corrosion, sand, dust, and harsh weather.

What vehicles are these compatible with?
They fit Wrangler YJ TJ CJ models, as well as trucks, trailers, vans, and boats. They are not for JK JL models.

Do the lights come with installation instructions?
No, instructions are not included. Professional installation is highly recommended, and some modifications or drilling may be required during installation.