Car Dent Removal Kit with Suction Cup Slide Hammer for Small & Large Dents

Product Specifications

• Recommended adhesive: Hot melt adhesive
• Suitable for: Automobile, refrigerator, motorcycle and washing machine sheet metal

What It Is / How It Works

This dent removal kit is built for pulling dents out of car body panels.

How to Use / Care

1. Clean the surface with a clean damp cloth.
2. Insert the glue stick into the gun, turn on the power and let it warm up for 5-10 minutes.
3. Choose a glue pull tab sized to the dent, apply the heated glue to it, and press it into the center of the dent until it sticks.
4. Let the glue cool for about 8-10 minutes, then align a golden dent lifter or bridge dent puller with the tab and press to pull up the dent. Repeat until the dent disappears.

How to Choose

Choose by dent type first. The kit suits small dents, slight dents and hail pits, but not corners, creases or dents in thick sheet metal such as big trucks. Pick a glue pull tab sized to the dent, and use hot melt adhesive, since other glues may damage the car paint.

Frequently Asked Questions

What dents is it suited for?
It is suited to small dents, slight dents and hail pits. It is not suitable for corners or creases, or dents in thick sheet metal such as big trucks.

Which glue should I use?
Use hot melt adhesive. Other glues may damage the car paint.

How do I remove the glue?
Spray the glue with alcohol, leave it for a while, then remove the hot melt adhesive so the paint is not hurt.

Will it harm the paint?
Hot melt adhesive is the glue recommended, because other glues may damage the car paint.