Get a precise and reliable speed reading for your car, truck, or boat with this 52mm GPS speedometer. It uses a GPS antenna to measure your speed, so you get accurate data without needing a mechanical connection to your vehicle's transmission. The bright 7-color LED backlight lets you customize the look to match your dashboard or mood.

This speed gauge is built for easy installation and simple operation. Once powered on, it automatically searches for a GPS signal. The LCD screen clearly shows the signal search status. If the signal is not found after a few minutes, the display will show an error code, so you always know the unit's status.

The backlight is easy to control with a simple wire connection. A short touch of the blue wire to the power supply negative will cycle through seven different colors, including an automatic mode that changes the color every minute for a dynamic look. This makes it easy to match your vehicle's interior lighting or just enjoy a change of pace.

Built with a waterproof IP67 rating and a metal construction, this speedometer is designed to handle tough conditions. It works with a wide range of 9-32V power systems, making it suitable for 12V and 24V vehicles. Whether you are upgrading your off-road truck or adding a gauge to your marine dash, this unit is a durable and functional choice.

Key Features and Benefits

- GPS antenna for accurate speed measurement that provides a reliable reading without mechanical connections.

• 7-color LED backlight with automatic cycling mode lets you personalize your dashboard look.

• Waterproof IP67 rating protects the gauge from water and dust for long-lasting use in tough environments.

• Wide working voltage of 9-32V ensures compatibility with most 12V and 24V vehicle electrical systems.

• Metal construction offers a sturdy and durable build that can handle vibration and daily use.

• Simple blue wire control for backlight color change makes operation quick and intuitive.

Who Is This For

- Car and truck owners who want a modern GPS speedometer as a replacement or upgrade for their factory gauge.

• Marine and boat enthusiasts looking for a waterproof speed gauge for their dashboard.

• Off-road and 4x4 drivers who need a reliable speed reading in vehicles with modified tires or gearing.

• Anyone building or restoring a custom vehicle who wants a clean, functional, and easy-to-install speedometer.

Usage Scenario

Mark just finished upgrading the tires on his off-road truck. The larger tires threw off his factory speedometer, making it read slower than his actual speed. He installed this GPS speedometer in a spare 52mm dash slot. After turning the key, the gauge searched for satellites and locked onto a signal within a minute. Now he sees his true speed on the trail and highway. The blue backlight matches his other gauges perfectly.

Micro Comparison

Unlike traditional speedometers that rely on a cable or electronic signal from the transmission, this unit uses a GPS signal to determine speed. This means it is not affected by tire size changes, gear ratio swaps, or worn-out speedometer cables. It provides a direct, satellite-based reading that is accurate from the moment you start driving. The simple installation and customizable backlight make it a convenient and modern upgrade for any vehicle.

Specifications

- Material: Metal

• Item Weight: 0.36kg

• Backlight: 7 Color LED

• Waterproof: IP67

• Working Voltage: 9-32V

• Fitment: for Car, Marine, Boat 12V 24V

Package Includes

- 1 x GPS Speedometer

• 1 x GPS Antenna

• 1 x Wiring Harness

• 1 x Mounting Bracket

• 1 x User Manual

Why You Will Love It

You will appreciate the freedom of a speedometer that is not tied to your vehicle's mechanical parts. The accurate GPS signal and easy color customization give you both function and style. It is a simple, durable upgrade that makes your drive more informed and your dashboard look great.

Questions and Answers

Question: Does this speedometer work in tunnels or under heavy tree cover?

Answer: It requires a clear view of the sky to get a GPS signal. In deep tunnels or very heavy cover, the signal may be lost, and the gauge will show an error code until it reconnects.

Question: How do I change the backlight color?

Answer: Briefly touch the blue wire to the power supply negative (ground). Each touch will cycle through the colors in sequence: red, green, blue, white, yellow, cyan, purple, and then automatic mode.

Question: Can this gauge be used on a motorcycle?

Answer: Yes, it can be used on a motorcycle as long as you have a 9-32V power source and a place to mount the 52mm gauge. The GPS antenna needs a clear view of the sky.

Question: What does the "ER" display mean?

Answer: The "ER" display means the gauge was unable to find a GPS signal after about 3 minutes of searching. Check that the antenna has a clear view of the sky and that it is properly connected.

Question: Is the wiring harness included?

Answer: Yes, the package includes a wiring harness and a mounting bracket to help you install the speedometer.

Keep your car and home spotless without the hassle of cords or heavy equipment. This 30000PA wireless car vacuum cleaner delivers professional-grade suction in a lightweight, handheld design that fits right in your glove box.

Strong suction power makes a real difference when you are cleaning tight spaces. With 30,000 PA of suction, this cordless vacuum picks up dirt, crumbs, and debris from car seats, floor mats, and upholstery. The rechargeable battery lets you clean anywhere without being tethered to an outlet. Switch from your car to your sofa, keyboard, or shelves in seconds.

The washable filter keeps maintenance simple and extends the life of your vacuum. Attachments like the nozzle and brush help you reach into crevices and clean delicate surfaces without scratching. When you are done, the compact body stores easily in your door pocket or glove box. This is a practical tool for anyone who wants a quick clean without the bulk of a traditional vacuum.

Whether you are tidying up after a road trip or giving your home a quick refresh, this handheld vacuum makes the job fast and easy. It is designed for real life, where spills happen and messes need to disappear fast.

Key Features and Benefits

- 30,000 PA suction power that deep-cleans car seats, mats, and home surfaces thoroughly

• Fully wireless design with a rechargeable battery so you can clean anywhere without cords

• Handheld and portable form that fits in one hand for easy maneuvering in tight spaces

• Multi-surface use that works on cars, furniture, keyboards, and shelves for versatile cleaning

• Washable filter that is easy to clean and maintain for long-lasting performance

• Compact storage that fits in your glove box or door pocket for convenient access

Who Is This For

- Drivers who want to keep their car interior clean without going to a car wash

• Pet owners who need to quickly remove fur and debris from seats and mats

• Home users looking for a lightweight vacuum for upholstery, keyboards, and shelves

• Travelers and commuters who want a portable cleaning tool for on-the-go messes

Usage Scenario

After a weekend road trip, you find crumbs scattered across the back seat and floor mats. Instead of lugging out a full-size vacuum, you grab this cordless handheld unit from the glove box. Within minutes, the 30,000 PA suction clears every crumb and speck of dirt. You even use the brush attachment to dust off the dashboard and air vents. The whole car looks fresh again without any hassle.

Micro Comparison

Many handheld vacuums struggle with deep cleaning because their suction power is too low. This model delivers 30,000 PA, which is significantly stronger than most portable options. It also stays cordless, so you never have to hunt for an outlet or deal with a tangled cord. The result is a cleaning tool that actually works as hard as you do.

Specifications

- Suction Power: 30,000 PA

• Power Source: Rechargeable wireless

• Filter: Washable

• Design: Handheld cordless

• Use: Car and home

Package Includes

- 1 x Vacuum Cleaner Unit

• Nozzle and Brush Attachments

• Charging Cable

• User Manual

Why You Will Love It

You will love how easy it is to grab this vacuum and clean up messes in seconds. No cords, no setup, no heavy lifting. Just strong suction that makes your car and home feel fresh every time you use it.

Questions and Answers

Question: How long does the battery last on a full charge?

Answer: The battery life depends on usage, but it is designed for quick cleaning sessions around your car and home.

Question: Can I use this vacuum on wet spills?

Answer: This is a dry vacuum cleaner designed for picking up dry debris like crumbs, dirt, and dust. It is not intended for wet spills.

Question: How do I clean the washable filter?

Answer: Remove the filter from the unit and rinse it under running water. Let it dry completely before placing it back in the vacuum.

Question: Does this vacuum come with a wall charger?

Answer: Yes, the package includes a charging cable to recharge the battery.

Question: Is this vacuum loud during operation?

Answer: It operates at a moderate noise level typical for handheld vacuums, but it is not excessively loud.

This 85mm tachometer with sensor gives you a clear, real-time read of your engine's RPM and running hours. Designed for diesel and gasoline engines, it features a red backlit display that is easy to read in low light. The gauge is a practical upgrade for anyone who needs to monitor engine performance on a boat, truck, car, or generator.

The tachometer provides accurate readings up to 4000 RPM and includes a built-in hour meter to track engine run time. This helps you stay on top of maintenance schedules and monitor engine load. The included sensor makes installation straightforward, and the 85mm diameter fits standard gauge panels.

Built with a durable plastic shell, this gauge operates on a wide voltage range from 9 to 32V DC. It is a versatile tool for keeping your engine running smoothly and reliably. Whether you are upgrading an old gauge or adding one to a new setup, this tachometer delivers the information you need at a glance.

Key Features and Benefits

- 85mm diameter gauge that fits standard dashboard openings for a clean, professional look

• Red backlight that improves visibility in dark or dim engine rooms and cockpits

• Built-in hour meter that tracks total engine run time for easier maintenance planning

• Included sensor that simplifies the installation process and ensures accurate signal pickup

• Wide operating voltage range from 9 to 32V DC for use in 12V and 24V electrical systems

• High precision readings up to 4000 RPM for monitoring both idle and high-speed operation

Who Is This For

- Boat owners who want to monitor marine diesel or outboard engine RPM and hours

• Truck and van operators needing a reliable tachometer for diesel engine performance tracking

• Car enthusiasts upgrading their dashboard with a racing-style gauge that includes an hour meter

• Generator users who need to log engine run time for scheduled oil changes and servicing

Usage Scenario

Mark runs a small fishing charter and relies on his diesel boat engine day in and day out. He noticed the old tachometer was fading and no longer accurate. After installing this 85mm gauge with the included sensor, he could finally see exact RPM at cruising speed and track total engine hours. The red backlight makes it easy to read even at dusk when returning to the dock. He now schedules oil changes based on the hour meter, saving money and avoiding unexpected breakdowns.

Micro Comparison

Unlike basic tachometers that only show RPM, this gauge combines a tachometer and hour meter in one unit. The included sensor saves you the hassle of sourcing a separate pickup. Its wide voltage range makes it adaptable to both 12V and 24V systems, giving you more flexibility than single-voltage alternatives.

Specifications

- Diameter: 85 mm / 3.3 in

• Operating Voltage: 9~32V DC

• Indicating Range: 0~4000 RPM

• Material: Plastic Shell

• Backlight Color: Red

• Number Of Cylinders: 4

Package Includes

- 1x Tachometer

• 1x Sensor

Why You Will Love It

You get both RPM and hour tracking in one gauge, which simplifies your dashboard and your maintenance routine. The red backlight adds a sporty look while improving readability in low-light conditions. With the included sensor and clear display, you can install it with confidence and start monitoring your engine right away.

Questions and Answers

Question: Can this tachometer work on a 12V car battery?

Answer: Yes, it operates on 9 to 32V DC, so it works on both 12V and 24V systems.

Question: Does the gauge come with the sensor?

Answer: Yes, the package includes one tachometer and one sensor.

Question: What is the diameter of this gauge?

Answer: The diameter is 85 mm, which is about 3.3 inches.

Question: Can I use this on a 4-cylinder diesel engine?

Answer: Yes, it is designed to work with 4-cylinder engines.

Question: Is the backlight adjustable in brightness?

Answer: The backlight is red and fixed brightness. It is designed for clear visibility without adjustment.

Get professional-grade, thick foam for your car wash without the hassle. This 300ml foam lance generator easily attaches to your pressure washer, creating dense, fluffy snow foam that lifts dirt and grime for a safer, more effective clean.

This adjustable foam pot is built for convenience and performance. Its lightweight, portable design makes it easy to handle and store, while the 300ml capacity provides enough foam for a full vehicle wash. The integrated adjustment dial lets you control the foam density and output, giving you the perfect mix for every cleaning task.

Constructed with durable materials, including a resistant nylon body and a stainless steel mesh filter, this foam cannon is built to last. It is compatible with any standard 1/4 inch quick-connect pressure washer, making it a versatile addition to your detailing kit. Simply fill, connect, and spray for a fun and effective wash experience.

Whether you are a weekend warrior or a detailing enthusiast, this foam lance simplifies the washing process. It helps to reduce the risk of scratches by loosening dirt before you even touch the paint with a sponge. Enjoy a deeper clean and a satisfying foam show with every use.

Key Features and Benefits

- Adjustable foam dial that lets you control the thickness and output of the foam for different cleaning needs.

• Lightweight and portable design that makes the foam pot easy to carry and maneuver around your vehicle.

• Stainless steel mesh filter that prevents debris from clogging the nozzle, ensuring consistent performance.

• 300ml capacity bottle that holds enough solution to wash an entire car without constant refills.

• Compatible with 1/4 inch pressure washer interfaces, making it a universal fit for most machines.

Who Is This For

- Car owners who want a professional foam wash at home for a deeper, gentler clean.

• Detailing enthusiasts looking for an affordable and effective foam cannon for their pressure washer.

• Anyone who wants to add a layer of lubrication before hand washing to reduce the risk of swirl marks and scratches.

Usage Scenario

David spent his Sunday morning getting his SUV ready for a family road trip. Instead of using a bucket and sponge right away, he filled his new 300ml foam lance with car shampoo, attached it to his pressure washer, and covered the SUV in a thick layer of snow foam. He let it dwell for a few minutes to loosen the road grime and bug splatter. The foam rinsed off easily, and when he finally used the sponge, there was almost no dirt left to scrub. The wash was faster, safer, and more satisfying than ever.

Micro Comparison

Unlike basic spray nozzles that only rinse, this foam lance actively generates thick, clinging foam to pre-soak and loosen dirt. Many standard foamers lack adjustable settings, but this model gives you control over the foam's density. It is also built with a stainless steel filter and durable nylon body, offering better longevity than all-plastic alternatives.

Specifications

Capacity of bottle: 300ML

Suitable for: 1/4 INCH interface

Pressure Range: 160 bar (2350psi)

Construction Material: Resistant Nylon, PA bottle, Stainless Steel mesh filter

Size: 13.5 x 6.8 cm / 5.3 x 2.67 in

Package Includes

- 1 x Foam Pot

Why You Will Love It

You will love how easy it is to create a thick, professional-looking foam that makes washing your car more effective and fun. It saves you time by pre-soaking the dirt, so you spend less effort scrubbing. Plus, the adjustable dial puts you in control, letting you customize the wash for every job.

Questions and Answers

Question: Will this foam lance work with my electric pressure washer?

Answer: Yes, it works with most pressure washers that have a standard 1/4 inch quick-connect fitting.

Question: How do I adjust the foam thickness?

Answer: You can adjust the foam density by turning the dial on the top of the foam pot. Turn it one way for thicker foam and the other way for a lighter rinse.

Question: Can I use any car shampoo in this foam cannon?

Answer: Yes, you can use most liquid car wash soaps. For best results, use a soap specifically designed for foam cannons.

Question: Is the bottle easy to fill and clean?

Answer: Yes, the bottle has a wide opening for easy filling and rinsing. It is simple to disassemble for a thorough clean after use.

Question: What is the maximum pressure this foam pot can handle?

Answer: It is rated for a maximum pressure of 160 bar (2350 psi), which covers most residential and light commercial pressure washers.

Turn your pressure washer into a professional-grade foam cannon with this 300ml foam lance generator. It creates thick, dense foam that clings to surfaces for a deeper clean. Designed for easy use, this portable foam pot connects to any standard 1/4 inch pressure washer interface.

This foam cannon is built to handle high pressure up to 160 bar (2350 psi). The adjustable nozzle lets you control the foam output, from a light mist to a heavy snow-like foam. The bottle is made from durable PA material with a stainless steel mesh filter for reliable performance.

Simply fill the 300ml bottle with your favorite car shampoo and water, attach it to your pressure washer, and start cleaning. The lightweight design makes it easy to carry and store. Whether you are washing a car, truck, motorcycle, or patio furniture, this foam gun delivers consistent results every time.

Enjoy a fun and satisfying car washing experience. The foam lance creates soft, fluffy snow foam that lifts dirt and grime without scratching your paint. It is a simple upgrade that makes washing faster and more effective.

Key Features and Benefits

- Adjustable foam output that lets you control the thickness and coverage for different cleaning tasks

• 300ml capacity bottle that holds enough solution for a full car wash without frequent refills

• High-pressure rated up to 160 bar (2350 psi) that works with most residential pressure washers

• Durable construction using resistant nylon and PA bottle with stainless steel mesh filter that lasts longer

• Lightweight and portable design that makes it easy to carry, store, and move around your work area

• Universal 1/4 inch quick-connect fitting that attaches to most pressure washer guns without adapters

Who Is This For

- Home car owners who want professional-looking foam coverage without going to a car wash

• Detailers looking for a portable foam cannon for mobile detailing jobs

• DIY enthusiasts who enjoy washing their vehicles and want better cleaning results

• Anyone with a pressure washer who wants to upgrade from a standard spray nozzle

Usage Scenario

Mark used to spend 30 minutes scrubbing his SUV with a bucket and sponge. After switching to this foam lance, he sprays a thick layer of snow foam over the entire car in under two minutes. The foam lifts dirt and bugs, so he only needs a quick rinse and a gentle wipe. His car looks showroom clean with half the effort.

Micro Comparison

Unlike basic spray nozzles that apply a thin stream of soap, this foam cannon creates a thick blanket of foam that clings to vertical surfaces. This gives the soap more time to break down dirt. Compared to larger foam cannons, the 300ml size is more portable and easier to handle, yet still holds enough for a full car wash.

Specifications

- Capacity: 300ml

• Suitable for: 1/4 inch interface

• Pressure Range: 160 bar (2350 psi)

• Construction Material: Resistant Nylon, PA bottle, Stainless Steel mesh filter

• Size: 16.5 x 7 cm / 6.5 x 2.75 in

Package Includes

- 1 x Foam Pot

Why You Will Love It

You will love how easy it is to create professional-grade foam at home. The adjustable nozzle gives you full control, so you can switch from a heavy foam wash to a light rinse. It is a small tool that makes a big difference in your car care routine.

Questions and Answers

Question: Will this foam cannon work with my gas pressure washer?

Answer: Yes, it works with most gas and electric pressure washers that have a 1/4 inch quick-connect fitting.

Question: How do I adjust the foam thickness?

Answer: Turn the black knob on top of the foam lance to adjust the foam output from light to heavy.

Question: Can I use this for cleaning other things like patio furniture?

Answer: Yes, you can use it for cars, trucks, motorcycles, boats, patio furniture, and outdoor equipment.

Question: Does the bottle come with a measuring line?

Answer: The bottle is clear and has markings so you can easily mix your soap and water.

Question: Is the foam lance easy to clean after use?

Answer: Yes, just rinse it with clean water after each use to prevent soap residue buildup.

Key Features

• Color Options — Choose from a range of colors including light black, matte black, red, green, purple, orange, yellow, golden, light blue, dark blue, gold, and transparent to match your vehicle's style.
• Vinyl Material — Made from vinyl, these films are designed for outdoor use and are removable without leaving adhesive residue.
• Versatile Use — Suitable for headlights, fog lights, side marker lights, or even the top part of the windshield.
• Personalization Is Available — Personalization is available, allowing you to tailor the film to your preference.

Product Specifications

• Material: Vinyl
• Size: 30 × 60 cm (11.8 × 23.6 in)
• Color: Light black, Matte black, Red, Green, Purple, Orange, Yellow, Golden, Light Blue, Dark Blue, Gold, Transparent
• Design: Color Change
• Sticker Placement: Car Light

What It Is / How It Works

These are vinyl adhesive films designed for car lights. They come in a 30x60cm sheet and can be cut to fit headlights, taillights, fog lights, or other light areas. The film is removable and leaves no residue, making it a temporary color change option for vehicle lighting.

Who It's For / Use Cases

Car enthusiasts looking to customize the appearance of their vehicle's lights will find these films useful. They are also suitable for drivers who want a temporary color change without committing to permanent modifications. The easy removal makes them a good option for those who like to change their car's look periodically.

How to Use / Care

1. Clean the surface of the light thoroughly to ensure the film adheres properly.
2. Measure and cut the film to the desired shape and size for your light.
3. Position the film over the light, aligning it carefully before pressing down.
4. Press the film firmly onto the surface, smoothing out any air bubbles with a soft cloth or squeegee.
5. Check the edges to ensure they are secure and the film is smooth.

How to Choose

When selecting a film, consider the color that best matches your vehicle's style. Think about the size of the sheet relative to the lights you plan to cover.

Frequently Asked Questions

What colors are available for this film?
The film comes in a variety of colors including light black, matte black, red, green, purple, orange, yellow, golden, light blue, dark blue, gold, and transparent.

Is the film easy to remove?
Yes, the film is designed to be removable without damaging your lights and leaves no adhesive residue to clean up.

What is the size of the film?
The film measures 30 × 60 cm (11. 8 × 23. 6 in).

Can this film be used on any car light?
It is suitable for headlights, fog lights, side marker lights, or even the top part of the windshield.

Monitor your engine's coolant temperature with this 310-22ohm water temp sensor. Designed for 12V and 24V systems, it works with most cars, motorcycles, and racing vehicles. The 1/8 NPT thread size and 10mm sensor fit common gauge setups for accurate temperature readings.

This temperature sensor helps you keep an eye on engine heat during daily driving or track sessions. Built with a metal body and plastic shell, it handles vibration and bumps without losing performance. The signal range of 310 to 22 ohms gives your gauge the data it needs to show real-time coolant temperature.

Installation is straightforward with the standard 1/8 NPT thread. Just screw it into the correct port on your engine block or intake manifold, connect the wire to your temperature gauge, and you are ready to go. It works as a direct replacement for many factory and aftermarket water temp sensors.

Whether you are building a custom dash or replacing a faulty sensor, this component delivers reliable readings. It supports both 12V and 24V electrical systems, making it versatile for cars, trucks, motorcycles, and race vehicles.

Key Features and Benefits

- 310-22ohm signal range that provides accurate temperature data to your gauge for precise engine monitoring

• 1/8 NPT thread size that fits common sensor ports for easy installation without adapters

• Works with 12V and 24V systems so it suits cars, trucks, and motorcycles

• Metal construction with plastic shell that resists vibration and impact for long-lasting use

• Universal compatibility that replaces many factory and aftermarket water temperature sensors

Who Is This For

- Car enthusiasts upgrading or replacing their coolant temperature sensor

• Motorcycle owners installing an aftermarket temperature gauge

• Racers and track day drivers monitoring engine heat during high-performance driving

• DIY mechanics performing routine maintenance or custom gauge installations

Usage Scenario

Mark noticed his daily driver's temperature gauge stopped working. Without accurate coolant readings, he worried about overheating during his commute. He ordered this 310-22ohm water temp sensor, installed it in the engine's sensor port in under 10 minutes, and connected it to his existing gauge. Now he sees real-time temperature data again and drives with confidence.

Micro Comparison

Unlike universal sensors that require adapters or modification, this unit uses a standard 1/8 NPT thread that fits directly into most engine ports. The 310-22ohm signal range matches many aftermarket gauges, so you do not need to recalibrate your display. It is a drop-in replacement that saves time and hassle compared to generic sensors with unknown specifications.

Specifications

- Material: Metal with plastic shell

• Thread Size: 1/8 NPT

• Sensor Size: 10mm

• Working Voltage: 12V-24V

• Signal: 310-22ohm

• Item Weight: 30g

Package Includes

- 1 x Temperature Sensor

Why You Will Love It

You get a reliable temperature sensor that fits standard ports and works with both 12V and 24V systems. It is built tough to handle engine bay conditions and gives your gauge accurate data so you can drive without worry. Simple installation means you spend less time fixing and more time driving.

Questions and Answers

Question: What thread size does this sensor use?

Answer: It uses a 1/8 NPT thread, which is a common size for engine temperature sensor ports.

Question: Will this sensor work with a 12V system?

Answer: Yes, it works with both 12V and 24V electrical systems.

Question: What is the signal range of this sensor?

Answer: The signal range is 310 to 22 ohms, which matches many aftermarket temperature gauges.

Question: Can I use this on a motorcycle?

Answer: Yes, it works on cars, motorcycles, and racing vehicles that use a 1/8 NPT sensor port.

Question: Is this sensor easy to install?

Answer: Yes, just screw it into the correct port and connect the wire to your temperature gauge.

Question: Does this sensor come with a gauge?

Answer: No, it is just the sensor. You need a compatible temperature gauge to display the readings.

SPECIFICATIONS

Brand Name: NONE

Country/Region of Manufacture: China

High-concerned chemical: none

Item Weight: 30.7g

OEM NO.: 31377715,31377713,31377714

Origin: Mainland China

Placement on Vehicle: Front

Keep your Ford's tire pressure monitoring system working reliably with this set of four 315MHZ TPMS sensors. Designed to fit a wide range of Ford models including Edge, Escape, Fiesta, Fusion, and Mustang, these sensors come pre-programmed for a straightforward installation process. They help you maintain proper tire pressure, which can improve fuel efficiency and extend tire life.

Each sensor is built with a PCBA board and battery, ensuring accurate pressure readings and consistent performance. The package includes four sensors, making it a complete replacement set for your vehicle. These sensors are a direct replacement for several OEM part numbers, including DE8T-1A180-AA, 9L3T-1A180-AF, and 9L3Z-1A189-A.

Installation is simplified with the use of an EL-50449 scan tool for activation. No sensor programming is required as they come pre-configured for your specific Ford make, model, and year. For best results, we recommend having a trained professional handle the installation.

Key Features and Benefits

- 315MHZ frequency that provides reliable tire pressure data to your vehicle's monitoring system

• Pre-programmed for direct fitment to save you time and reduce installation complexity

• Compatible with multiple Ford models to offer a versatile replacement solution for various vehicles

• Includes four sensors in one package to provide a complete set for all four tires

• Made with a PCBA board and battery for durable and accurate performance

Who Is This For

- Ford owners with vehicles manufactured between 2007 and 2020 who need to replace faulty or dead TPMS sensors

• DIY car enthusiasts who prefer to handle their own tire pressure sensor replacements at home

• Mechanics and auto shops looking for a reliable, pre-programmed TPMS sensor set for Ford service jobs

• Drivers who want to maintain optimal tire pressure for better fuel economy and safer driving conditions

Usage Scenario

Mark noticed his Ford Fusion's tire pressure warning light stayed on even after checking and inflating his tires. After a quick scan at his local auto parts store, he learned one of his TPMS sensors had failed. He ordered this four-pack, had them installed by a trusted mechanic, and used his EL-50449 tool to activate them. The warning light turned off immediately, and he felt more confident driving knowing his tire pressures were being monitored correctly again.

Micro Comparison

Many generic TPMS sensors require complex programming that can only be done with expensive dealer-level tools. This set comes pre-programmed for your specific Ford model, so you only need an EL-50449 scan tool for activation. It saves you a trip to the dealership and keeps the replacement process simple and affordable.

Specifications

Product Frequency: 315MHZ

Material: PCBA board and battery

OEM Part Numbers: DE8T-1A180-AA, 9L3T-1A180-AF, 9L3Z-1A189A, 9L3Z-1A189-A, CM5T-1A180-AA, ZZDA37140

Matching Tool: EL-50449

Applicable Vehicle Types

• For Ford Edge (from 2011-01 to 2015-05)

• For Ford Escape (from 2007-02 to 2012-09)

• For Ford Fiesta (from 2018-01 to 2020-07)

• For Ford Fusion (from 2010-01 to 2012-12)

• For Ford Fusion (from 2012-09 to 2013-12)

• For Ford Mustang (from 2010-01 to 2012-12)

• For Ford Mustang (from 2013-01 to 2015-02)

Package Includes

- 4 x TPMS Tire Pressure Sensors

Why You Will Love It

You get a complete set of four pre-programmed sensors that fit multiple Ford models, so you do not have to search for individual replacements. The straightforward activation process with an EL-50449 tool means you can get back on the road quickly. Reliable tire pressure monitoring gives you peace of mind and helps protect your tire investment.

Questions and Answers

Question: Do these sensors come pre-programmed for my Ford vehicle?

Answer: Yes, these sensors are 100% new and come pre-programmed specifically for your Ford make, model, and year. You only need an EL-50449 scan tool to activate them after installation.

Question: What is the frequency of these TPMS sensors?

Answer: These sensors operate at 315MHZ, which is the standard frequency for many Ford vehicles.

Question: Can I install these sensors myself?

Answer: Installation is recommended to be performed only by trained professionals. However, if you have experience with tire work, you can install them and then use an EL-50449 tool for activation.

Question: How do I know if these sensors fit my specific Ford model?

Answer: Please confirm your vehicle's part number before purchasing. These sensors are compatible with Ford Edge, Escape, Fiesta, Fusion, and Mustang within specific model years listed in the product description.

Question: What should I do if the sensors do not work after installation?

Answer: First, make sure you have used an EL-50449 scan tool to activate them. If the issue continues, contact us before returning the product. Please ensure you have ordered the correct part number for your vehicle.

This TPMS sensor set is a direct replacement for many Toyota, Lexus, and Scion vehicles. It comes pre-programmed for your specific vehicle, so no sensor programming is required before installation. These sensors monitor tire pressure and temperature to help you drive with greater confidence.

Each sensor operates at 315MHz and is designed to be a direct fit for a wide range of models. The package includes four sensors, enough for a full set of tires. The sensors are brand new and built to provide reliable performance.

Installation is straightforward for a trained professional. After installing the new sensors, most vehicles will require a relearn procedure. This can be done using a compatible scan tool, an automatic relearn by driving, or an OBD relearn process depending on your vehicle.

Key Features and Benefits

- Pre-programmed sensors that require no programming, saving you time and effort during installation

• 315MHz operating frequency ensures compatibility with your vehicle's TPMS system

• Direct replacement design that fits your existing valve stems and rims without modification

• Brand new condition that provides reliable monitoring of tire pressure and temperature

• Includes four sensors for a complete tire set replacement

Who Is This For

- Toyota owners with models from 2004-2015 needing to replace faulty or dead TPMS sensors

• Lexus drivers looking for a cost-effective replacement for their original sensors

• Scion owners who want a direct fit solution for their vehicle's tire pressure monitoring system

• DIY mechanics and professional installers seeking pre-programmed sensors for quick installation

Usage Scenario

Mark noticed the tire pressure warning light on his 2012 Toyota RAV4 dashboard had been on for a week. After checking the tires, he realized the original TPMS sensors were no longer working. He ordered this set of four sensors, and his mechanic installed them in under an hour. After a quick relearn procedure with a scan tool, the warning light turned off and Mark could drive with confidence again, knowing his tire pressure was being monitored.

Micro Comparison

Unlike some universal TPMS sensors that require complex programming and cloning, these sensors come pre-programmed for your specific vehicle. They are a direct replacement for original part numbers like 42607-33021 and 42607-06011, making installation simpler and more reliable. This set offers a practical solution without the higher cost of dealer-sourced sensors.

Specifications

Condition: Brand New

Manufacturer Part Number: PMV-107J

Operating Frequency: 315MHz

Fitment Type: Direct Replacement

Color: As shown in pictures

Package Includes

- 4 x Tire Pressure Sensor

Why You Will Love It

You will appreciate the convenience of pre-programmed sensors that skip the complicated setup. This set gives you a reliable way to keep your tire pressure monitoring system working, which helps you stay aware of tire issues before they become problems. It is a practical upgrade for your vehicle's safety features.

Questions and Answers

Question: Do I need to program these sensors before installing them?

Answer: No, these sensors come pre-programmed for your vehicle's make, model, and year. You do not need to program them before installation.

Question: Will my car need a relearn procedure after installing these sensors?

Answer: Yes, in most cases your vehicle will need a relearn procedure after installation. This can be done using a scan tool, automatic relearn by driving, or OBD relearn depending on your vehicle.

Question: What vehicles are these sensors compatible with?

Answer: These sensors are compatible with many Toyota, Lexus, and Scion models from 2004 to 2015. Check the vehicle fitment list to confirm compatibility with your specific model and year.

Question: Do these sensors replace the original part number 42607-33021?

Answer: Yes, these sensors are a direct replacement for part numbers including 42607-33021, 42607-06011, and PMV-107J.

Question: How do I know if these sensors will fit my car?

Answer: Check your vehicle's VIN code, model, and year against the fitment list provided. Also confirm that your existing part number matches one of the replacement numbers listed.

Keep your 2020 Ford or Lincoln rolling safely with this set of four pre-programmed 315MHZ TPMS sensors. Designed to directly replace part numbers JX7T-1A180-AA and JX7Z-1A189-C, these sensors help you maintain proper tire pressure without the hassle of complex programming. Just install and perform a relearn with an OBDII tool to get your Tire Pressure Monitoring System back online.

Each sensor is 100% brand new and factory tested before shipping to ensure reliable performance. The built-in battery is designed to last approximately 3 to 5 years under normal driving conditions, giving you long-term peace of mind. With a simple installation process recommended for trained professionals, you can restore your vehicle's safety system quickly and efficiently.

These sensors are specifically compatible with a range of 2020 models including the Ford Escape, Explorer, Police Interceptor Utility, Transit 150, Transit 250, and Transit 350, as well as the Lincoln Aviator and Corsair. By matching your vehicle's original equipment frequency and fitment, they deliver accurate tire pressure readings directly to your dashboard display.

Before ordering, double-check your vehicle's VIN code or the part number on your current sensor to confirm compatibility. If you are unsure, send us a picture of your existing sensor or the part number, and we will help you verify the correct fit. This simple step ensures a smooth installation and avoids any unnecessary returns.

Key Features and Benefits

- Pre-programmed at 315MHZ for specific 2020 Ford and Lincoln models that eliminates the need for manual programming and saves you time.

• 100% brand new and factory tested construction that ensures reliable performance right out of the box.

• Long battery life of approximately 3 to 5 years that provides durable service and reduces the frequency of replacements.

• Relearn activation via OBDII tool that integrates seamlessly with your vehicle's existing TPMS system.

• Direct replacement for OEM part numbers JX7T-1A180-AA and JX7Z-1A189-C that guarantees a perfect fit for compatible models.

Who Is This For

- Owners of 2020 Ford Escape, Explorer, Police Interceptor Utility, or Transit models needing a direct TPMS replacement.

• Drivers of 2020 Lincoln Aviator or Corsair looking for a pre-programmed sensor set to restore their tire monitoring system.

• Vehicle owners who prefer to have a spare set of TPMS sensors on hand for future tire rotations or replacements.

• DIY enthusiasts or professional mechanics seeking a reliable, drop-in sensor solution without the need for programming tools.

Usage Scenario

Mark noticed the TPMS warning light glowing on his 2020 Ford Explorer's dashboard. After a quick check, he confirmed the tire pressures were fine, but the sensors were no longer communicating. He ordered this four-pack of pre-programmed sensors, took his SUV to a trusted mechanic, and had them installed in under an hour. After a simple OBDII relearn procedure, the warning light turned off, and Mark could see accurate tire pressure readings again. He now drives with confidence knowing his TPMS is fully functional.

Micro Comparison

Unlike universal TPMS sensors that require a separate programming step and a specialized tool, these sensors come pre-programmed for your specific 2020 Ford or Lincoln model. You only need an OBDII tool for the relearn process, which is a standard procedure for most modern vehicles. This reduces installation complexity and gets your system working faster than with blank sensors that need manual configuration.

Specifications

- Frequency: 315MHZ

• Material: TPMS Tyre Pressure Monitor Sensor

• OEM Part Number: JX7T-1A180-AA, JX7Z-1A189-C, TPMS60, JX7T1A180AA, JX7Z1A189C

• Battery Life: Approximately 3 to 5 Years

• Condition: 100% Brand New

Package Includes

- 4 x Tire Pressure Monitor Sensor

Why You Will Love It

You will love the convenience of a drop-in replacement that does not require any programming on your part. Simply install, perform a quick relearn, and your TPMS warning light will disappear. This set saves you the headache of dealing with faulty sensors and helps you maintain safe tire pressure for better fuel economy and handling.

Questions and Answers

Question: How do I know if these sensors will fit my car?

Answer: Check your vehicle's year, make, and model against the compatibility list. Also verify your existing sensor part number or VIN code before ordering to ensure a correct match.

Question: Do I need to program these sensors before installation?

Answer: No, they come pre-programmed for your vehicle. You only need to activate them using a scan tool or perform an OBDII relearn procedure after installation.

Question: What should I do before installing the sensors on my car?

Answer: Ask your installer to scan the new sensors with their TPMS tool to confirm the frequency, tire pressure reading, and battery status before mounting them on the wheels. This prevents unnecessary installation fees.

Question: How long does the battery last in these sensors?

Answer: The built-in battery is designed to last approximately 3 to 5 years under normal driving conditions.

Question: What if the sensors do not work after installation?

Answer: Contact us with your order details and a description of the issue. We are available to help troubleshoot and will work with you to resolve the problem.

Replace a failing or dead tire pressure sensor in your compatible Honda or Acura with this direct-fit 315MHz TPMS sensor. It comes pre-programmed for specific models, so you can avoid the hassle of manual programming and get back on the road with properly monitored tire pressure.

This sensor is designed to work with several Honda and Acura models from the mid-2000s to early 2010s, including the Odyssey, Ridgeline, Pilot, RL, TL, and MDX. It operates at the standard 315MHz frequency and is built as a direct replacement for multiple OEM part numbers like 06421-S3V-A04 and 06421-S9V-A01. The sensor is 100% new and does not require programming before installation, though it will need to be activated using a TPMS scan tool or a re-learn procedure.

Keeping your TPMS in good working order helps you maintain proper tire inflation, which can improve fuel efficiency and extend tire life. A simple re-learn process after installation gets the sensor communicating with your vehicle's system. Professional installation is recommended to ensure a secure fit and correct activation.

Key Features and Benefits

- Pre-programmed for specific Honda and Acura models that eliminates the need for sensor programming and simplifies the replacement process.

• 315MHz operating frequency that matches the factory system in compatible vehicles for reliable tire pressure monitoring.

• Direct replacement for multiple OEM part numbers including 06421-S3V-A04, 06421-S9V-A01, and 06421-S3V-A02 that ensures a correct fit for your specific model.

• 100% new sensor construction that provides dependable performance and a battery life of about 3 years.

• Activation via scan tool or vehicle re-learn procedure that integrates the sensor with your car's TPMS system.

Who Is This For

- Honda owners with a 2005-2014 Odyssey, Ridgeline, or Pilot who need a replacement TPMS sensor.

• Acura owners with a 2008 RL, 2008 TL, or 2005-2014 MDX looking for a direct-fit tire pressure sensor.

• Drivers who want a pre-programmed sensor to avoid the complexity of manual programming.

• Anyone maintaining a compatible 3.2L or 3.5L Honda or Acura vehicle and replacing a dead or missing TPMS sensor.

Usage Scenario

Mark noticed the TPMS warning light on his 2008 Honda Pilot dashboard was staying on even after he checked and filled his tires. A quick scan at the shop confirmed one of the sensors had failed. Instead of going to the dealership, he ordered this pre-programmed 315MHz sensor, had a local tire shop install it, and ran a quick re-learn with their scan tool. The warning light turned off, and now he drives with confidence knowing his tire pressure is monitored properly.

Micro Comparison

Unlike universal TPMS sensors that require complex programming and cloning to match your vehicle, this sensor comes pre-programmed for specific Honda and Acura models. It is a direct-fit replacement for OEM part numbers like 06421-S3V-A04, so you can install it without worrying about compatibility issues. The straightforward activation process using a scan tool or re-learn procedure gets the job done faster than sensors that need full manual setup.

Specifications

Operating Frequency: 315MHz

Battery Life: About 3 years

Compatible OEM Part Numbers: 06421-S9V-A01, 06421-S9V-A03, 51839114, 06421-S3V-A02, 06421-S3V-A03, 06421-S3V-A04, 06421-SHJ-A53, 06421-SHJ-A54

Package Includes

- 1 x TPMS Sensor

Why You Will Love It

You get a direct-fit replacement that saves you the trouble of programming. The pre-programmed design means you can install it and activate it quickly, getting your TPMS warning light off and your tire monitoring back to normal. It is a simple, reliable solution for a common issue on these Honda and Acura models.

Questions and Answers

Question: Does this TPMS sensor work with my 2007 Honda Odyssey?

Answer: Yes, this sensor is compatible with the Honda Odyssey from 2005 to 2010 models.

Question: Do I need to program this sensor before installation?

Answer: No, the sensor comes pre-programmed for specific Honda and Acura models. You only need to activate it with a TPMS scan tool or perform a re-learn procedure after installation.

Question: What is the battery life of this sensor?

Answer: The battery life is about 3 years under normal driving conditions.

Question: Will this sensor fit my 2008 Acura TL?

Answer: Yes, it is compatible with the Acura TL from 2008 model year.

Question: Can I install this sensor myself?

Answer: Installation is recommended to be performed by a trained professional to ensure proper fit and activation.

Keep your tires at the right pressure with this 315MHz TPMS sensor designed for a wide range of Toyota and Scion models. It replaces OEM part numbers PMV-107J, 42607-06011, and 42607-33011, giving you a direct-fit solution for your vehicle's tire pressure monitoring system.

This sensor comes pre-programmed for your specific make, model, and year, so no additional programming is needed before installation. You just need a scan tool or a relearn procedure to activate it once it is installed. It helps you maintain proper tire inflation, which can improve fuel efficiency and extend tire life.

Built with a durable construction and a battery life of about three years, this TPMS sensor is a reliable replacement for a worn or faulty unit. It operates at a frequency of 315MHz, matching the original equipment specifications for many Toyota and Scion vehicles from the mid-2000s to early 2020s.

Installation is straightforward for a trained professional. The sensor sends real-time pressure data to your car's dashboard, alerting you if a tire is underinflated. This gives you peace of mind on every drive, whether you are commuting to work or heading out on a long road trip.

Key Features and Benefits

- Pre-programmed for your vehicle that saves you time and eliminates the need for complex setup

• 315MHz operating frequency that matches factory specifications for reliable communication with your car's system

• About three years of battery life that provides long-term, maintenance-free performance

• Direct replacement for OEM part numbers PMV-107J, 42607-06011, and 42607-33011 that ensures a proper fit

• Real-time pressure monitoring that helps you catch slow leaks and maintain safe tire pressure

Who Is This For

- Toyota and Scion owners who need to replace a faulty or dead TPMS sensor

• DIY mechanics looking for a direct-fit, pre-programmed sensor for a quick installation

• Drivers who want to maintain optimal tire pressure for better fuel economy and safety

• Anyone restoring a used Toyota or Scion and replacing worn-out TPMS components

Usage Scenario

Mark noticed the tire pressure warning light on his 2010 Toyota RAV4 dashboard flickering on during his morning commute. After checking his tires with a gauge, he found one was consistently low. Instead of visiting the dealership, he ordered this pre-programmed 315MHz TPMS sensor. He had a local shop install it and run the relearn procedure. The warning light turned off, and his tire pressure readings are now accurate on the dashboard. He no longer worries about uneven tire wear or low pressure on the highway.

Micro Comparison

Unlike universal TPMS sensors that require complex programming or cloning, this unit comes pre-programmed for your specific Toyota or Scion model. It is a direct replacement for OEM part numbers PMV-107J, 42607-06011, and 42607-33011, so you do not need to spend extra time configuring it. This makes it a simpler and more reliable choice compared to generic aftermarket options.

Specifications

Operating Frequency: 315MHz

Battery Life: About 3 years

Replaces Part Numbers: PMV-107J, 42607-06011, 42607-33011, 42607-33021, 42607-75010, 42607-0E011

Package Includes

- 1 x 315MHz TPMS Tire Pressure Sensor

Why You Will Love It

You will appreciate the straightforward installation that does not require a trip to the dealership. Knowing your tire pressure is monitored accurately gives you confidence on every drive. It is a small investment that helps protect your tires and improves your car's overall safety.

Questions and Answers

Question: Does this TPMS sensor come pre-programmed for my car?

Answer: Yes, it comes pre-programmed for your specific make, model, and year. You only need to activate it with a scan tool or a relearn procedure after installation.

Question: Will this sensor work on a 2008 Toyota Corolla?

Answer: Yes, it is compatible with the Toyota Corolla from 2008 to 2013. Please check the full application list to confirm your exact year.

Question: Do I need any special tools to install this sensor?

Answer: You will need a tire mounting machine and a scan tool or relearn tool to activate the sensor after installation. Professional installation is recommended.

Question: How long does the battery last in this TPMS sensor?

Answer: The battery life is about three years under normal driving conditions.

Question: Can I use this sensor on a Scion xB?

Answer: Yes, it is compatible with the Scion xB from 2007 to 2016. Verify your vehicle year in the application list before ordering.

Keep your tire pressure in check with this 315MHZ TPMS sensor designed for a wide range of Lexus and Toyota vehicles. Whether you need a single replacement or a full set of four, this pre-programmed sensor helps you maintain proper inflation for better safety and fuel efficiency.

This sensor comes ready to install for select models. It is designed to replace original units like 42607-33011, 42607-33021, and many other OEM numbers. The sensor operates at 315MHZ and requires no programming before installation, though you will need an OBD tool or relearn procedure to activate it after mounting.

Built with a PCBA board and battery, this TPMS sensor delivers reliable performance. Each unit is a direct replacement for your factory sensor, helping you restore your vehicle's tire pressure monitoring system quickly. Just confirm your vehicle's compatibility by checking the OE number before purchase.

Key Features and Benefits

- Pre-programmed sensor that does not require additional programming, saving you time during installation

• 315MHZ frequency designed to match many Lexus and Toyota factory systems, ensuring correct signal communication

• Compatible with a broad range of models including 4Runner, Camry, Corolla, ES, GS, IS, LS, LX, Prius, RAV4, Tacoma, and more, giving you flexible coverage

• Available in a 1-pack or 4-pack option, letting you replace just one faulty sensor or all four at once

• Direct replacement for multiple OEM numbers like 42607-0C010, 42607-30030, and 42607-35010, simplifying the matching process

Who Is This For

- Toyota and Lexus owners with a 315MHZ TPMS system who need a cost-effective replacement sensor

• Drivers looking to restore a malfunctioning tire pressure monitoring system without visiting a dealership

• Car enthusiasts who prefer to handle basic maintenance and sensor replacements at home

• Fleet managers or mechanics servicing multiple compatible Toyota and Lexus vehicles

Usage Scenario

Mark noticed his Toyota 4Runner's TPMS light stayed on after a tire rotation. Instead of paying a dealer for a new sensor, he ordered a 4-pack of these 315MHZ units. After confirming the OEM number matched his original sensor, he installed them himself. A quick relearn with his OBD tool turned off the warning light, and he has had accurate pressure readings ever since.

Micro Comparison

Unlike generic sensors that require complicated programming tools, this TPMS sensor comes pre-programmed for your specific vehicle make and model. It simplifies the replacement process by working as a direct swap for your original unit. Just verify your OE number, install the sensor, and perform a relearn procedure to get back on the road.

Specifications

- Material: PCBA board and battery

• Model Number: 42607-30030, 42607-35010, 42607-75010, 42607-33011, 42607-06011, 42607-34020

• OEM Number: PMV-107J

• Frequency: 315MHZ

• Matching Requirements: OBD tool

Package Includes

- 1 or 4 TPMS tire pressure sensors (depending on selected option)

Why You Will Love It

You will appreciate the straightforward installation and broad vehicle compatibility. This sensor saves you a trip to the shop while helping you maintain proper tire pressure for a smoother, safer drive. Plus, the option to buy a single sensor or a full set gives you control over your repair budget.

Questions and Answers

Question: Does this sensor work on a 2010 Toyota RAV4?

Answer: Yes, this 315MHZ sensor is compatible with the Toyota RAV4 from 1995 to 2011. Confirm your original part number to be sure.

Question: Do I need to program this sensor before installation?

Answer: No, the sensor comes pre-programmed for your vehicle. You only need to perform a relearn procedure after installation using an OBD tool.

Question: Can I use this sensor on a Lexus ES 350?

Answer: Yes, it fits Lexus ES models from 2006 to 2012. Check your OE number like 42607-33011 or 42607-33021 for compatibility.

Question: How do I activate the sensor after installing it?

Answer: You will need an OBD tool or a relearn procedure to activate the sensor. Installation is recommended for trained professionals.

Question: What is the difference between the 1-pack and 4-pack?

Answer: The 1-pack is for replacing a single faulty sensor, while the 4-pack lets you replace all sensors at once for even tire pressure monitoring.

Key Features

• Adjustable Height — The deck height adjusts from 27 cm (10. 63 in) to 46 cm (18. 11 in), letting you set the lift to a comfortable working height.
• Secure Locking — The adjustable top plate is secured with a lock nut, helping keep the lift stable while in use.
• Anti-Slip Pad — A durable anti-slip pad on the steel deck helps prevent the bike from slipping during lifting.
• Easy Assembly — The lift is easy to assemble, and the safety pin stays connected to the arm so it won't get lost.

Product Specifications

• Color: Black
• Material: Steel
• Dimensions: 15.4 cm (6.1 in) x 31.3 cm (12.3 in) x 29.8 cm (11.7 in)
• Net Weight: 6.2 kg (13.6 lb)
• Load Capacity: 330 lb
• Adjustable Range: 27 cm (10.63 in) - 46 cm (18.11 in)
• Package Size: 28 cm (11 in) x 17 cm (6.69 in)

What It Is / How It Works

This is a motorcycle lift table, a steel platform that raises your bike for easier maintenance and cleaning. It allows easy and controlled lifting of off-road motorcycles, with an adjustable deck height to suit different models.

Who It's For / Use Cases

Motorcycle lift tables are useful for riders who do their own maintenance, such as cleaning the chain, changing oil, or inspecting the underside. They also help home mechanics who want a stable work surface without bending down. This lift suits most motorcycles, making it a practical addition for hobbyists and DIY enthusiasts.

How to Use / Care

1. Assemble the lift table according to the included instructions, ensuring all bolts are tightened securely.
2. Place the lift on a flat, stable surface and adjust the deck height to a level that is comfortable for you.
3. Position your motorcycle over the lift, aligning the frame or designated lift points with the anti-slip pad.
4. Raise the lift slowly and steadily, then secure the top plate with the lock nut before working on the bike.

How to Choose

When choosing a motorcycle lift, consider the weight capacity to ensure it can handle your bike's weight. Check the adjustable height range to see if it provides a comfortable working position. A lift with a secure locking mechanism and anti-slip surface adds safety during use.

Frequently Asked Questions

What is the maximum weight capacity?
The lift table can support up to 330 lb, making it suitable for most motorcycles.

How high can the deck be adjusted?
The deck height adjusts from 27 cm (10. 63 in) to 46 cm (18. 11 in), so you can set it to a comfortable working level.

What material is it made of?
It is made of solid steel, and the deck features a durable anti-slip pad to help prevent the bike from slipping.

Is it easy to assemble?
Yes, it is designed for easy assembly. The safety pin is connected to the arm so it won't get lost.

The 35000PA Wireless Car Vacuum Cleaner delivers elite suction power in a fully cordless, handheld design. It is built to handle the toughest messes in your car, from embedded pet hair to fine dust and stubborn crumbs. This device also transitions seamlessly to home use for upholstery, keyboards, and shelves, giving you total control with one compact tool.

With 35,000 PA of suction, this vacuum cleaner sets a new standard for handheld cleaning. The fully wireless and rechargeable design means you can clean anywhere without being tethered to a cord. Its lightweight and portable build allows for easy one-handed use, making it simple to reach tight spaces in your car or around the house.

The vacuum is designed for multi-surface use, working effectively on car seats, mats, keyboards, sofas, and more. The washable filter is easy to clean and maintain, ensuring long-term performance. When not in use, the compact design fits easily into your glove box or door pocket for convenient storage.

Key Features and Benefits

- 35,000 PA suction power that provides elite-level cleaning for the most demanding tasks

• Fully wireless, rechargeable battery that eliminates cords and adapters for unrestricted movement

• Handheld and portable design that is lightweight for easy one-handed use in tight spaces

• Multi-surface use that cleans car seats, mats, keyboards, sofas, and more with one device

• Washable filter that is easy to clean and maintain for consistent long-term performance

• Compact storage that fits easily in your glove box or door pocket for quick access

Who Is This For

- Car owners who want a powerful, portable vacuum for quick interior cleanups

• Pet owners dealing with embedded pet hair on seats and floor mats

• Home users needing a compact vacuum for upholstery, keyboards, and shelves

• Anyone who prefers a cordless tool for convenient, on-the-go cleaning

Usage Scenario

After a weekend road trip with the family, you find crushed crackers and sand embedded in the car seats and floor mats. Instead of heading to a car wash, you grab the 35000PA Wireless Car Vacuum Cleaner from the glove box. Within minutes, the powerful suction lifts every crumb and grain of sand from the fabric, leaving the interior looking fresh and clean. Later, you use the same vacuum to clean dust off the living room sofa and keyboard, proving one device can handle it all.

Micro Comparison

While many handheld vacuums offer moderate suction, this model provides 35,000 PA of power for deeper cleaning. Its fully cordless design and compact storage make it more convenient than larger, corded alternatives that are harder to maneuver in tight spaces. For those who want elite suction without the hassle of cords, this vacuum offers a practical all-in-one solution.

Specifications

- Suction Power: 35,000 PA

• Power Source: Rechargeable wireless

• Filter: Washable

• Design: Handheld cordless

• Use: Car and home

Package Includes

- 1 x Vacuum Cleaner Unit

• Nozzle and Brush Attachments

• Charging Cable

• User Manual

Why You Will Love It

You will love the freedom of cordless cleaning combined with elite suction power that tackles even the toughest messes. This vacuum fits right in your glove box, so it is always ready when you need it. It is a simple, effective tool that makes car and home cleaning feel effortless.

Questions and Answers

Question: How long does the battery last on a full charge?

Answer: The battery life depends on usage, but the vacuum is designed for quick cleaning sessions in your car and home.

Question: Can I use this vacuum on wet spills?

Answer: This vacuum is designed for dry debris like crumbs, dust, and pet hair. It is not intended for wet spills.

Question: How do I clean the filter?

Answer: The filter is washable. Simply remove it, rinse it under water, and let it dry completely before reinserting.

Question: Does this vacuum come with attachments?

Answer: Yes, the package includes a nozzle and brush attachments for different cleaning tasks.

Question: Is this vacuum suitable for cleaning keyboards?

Answer: Yes, the handheld design and included brush attachment make it effective for cleaning keyboards and other small electronics.

This 35ml high power foam spray pot is designed to work with your high pressure washer for a more effective car cleaning routine. It features a 1/4'' quick connector and an adjustable alloy nozzle, making it a practical tool for applying soap or cleaning solutions evenly.

The spray pot is built with a durable engineering plastic body and an alloy interface for a secure connection to your pressure washer gun. The adjustable nozzle lets you control the spray pattern, helping you target foam exactly where you need it. This car wash foam sprayer simplifies the process of applying soap, allowing for a more thorough clean.

Using this foam spray bottle helps you achieve a thick layer of foam that clings to surfaces, loosening dirt and grime before you rinse. It is a straightforward addition to your car care kit, designed for regular use with high pressure washers.

Key Features and Benefits

- 35ml capacity foam pot that holds enough soap solution for a single car wash session

• 1/4'' quick connector that allows for fast attachment and detachment from your pressure washer gun

• Adjustable alloy nozzle that lets you change the spray pattern for better foam coverage

• Engineering plastic body that is lightweight yet durable for regular use

• Alloy interface and nozzle materials that provide a reliable and long-lasting connection

Who Is This For

- Car owners who wash their vehicles at home with a high pressure washer

• Detailing enthusiasts looking for a simple foam applicator for pre-wash soaking

• Anyone who wants to apply car shampoo evenly without using a bucket and sponge

• Users who need a compact and easy-to-store foam spray bottle for their cleaning kit

Usage Scenario

Mark had just finished a long week of driving through muddy roads. Instead of heading to a car wash, he grabbed his high pressure washer and attached this foam spray pot. He filled it with car shampoo, adjusted the nozzle, and covered his car in a thick layer of foam. After letting it sit for a few minutes, he rinsed off the dirt easily, leaving his car looking clean without much effort.

Micro Comparison

Unlike manual spray bottles that require constant pumping, this foam pot connects directly to your pressure washer for a steady foam output. The adjustable nozzle gives you more control over the spray pattern compared to fixed-nozzle alternatives, helping you cover larger areas faster.

Specifications

- Body Material: Engineering Plastic

• Interface Material: Alloy

• Nozzle Material: Alloy

• Capacity: 35ml

• Connector: 1/4'' Quick Connector

Package Includes

- 1 x Foam Spray Pot

Why You Will Love It

This foam spray pot makes car washing faster and more effective by letting you apply soap directly with your pressure washer. Its compact size and quick connector mean you can set it up in seconds and store it easily when done. You will appreciate the even foam coverage that helps lift dirt before you rinse.

Questions and Answers

Question: Will this foam pot fit my pressure washer?

Answer: It uses a 1/4'' quick connector, so it fits most pressure washer guns that have a standard 1/4'' connection.

Question: How much soap does the 35ml capacity hold?

Answer: 35ml is enough for a single car wash session when mixed with water according to your soap's instructions.

Question: Is the nozzle adjustable?

Answer: Yes, the alloy nozzle is adjustable so you can change the spray pattern from a narrow stream to a wider fan.

Question: What is the body made of?

Answer: The body is made of engineering plastic, which is lightweight and durable for regular use.

Question: Can I use this for tasks other than car washing?

Answer: Yes, you can use it to apply cleaning solutions on other outdoor surfaces like patio furniture or driveways.

Upgrade your Mercedes GL or ML W164 with a powerful 35W HID Xenon headlamp bulb that delivers a bright 6000K white light. These Canbus LED headlights provide 20000LM of illumination, making night driving safer and more comfortable. Built with a turbo cooling system, they are designed to fit your 2010, 2011, or 2012 Mercedes perfectly.

These headlight bulbs offer a plug-and-play installation that works with your vehicle's existing setup. The 6000K color temperature produces a crisp, white light that closely mimics natural daylight, reducing eye strain during long drives. With an IP68 waterproof rating and a lifespan of over 50,000 hours, you can rely on these bulbs for years of consistent performance.

The advanced cooling system combines an aluminum alloy heat sink with a high-speed turbo fan running at 12,000 RPM. This keeps the bulb operating at an optimal temperature, even in extreme conditions ranging from -40°C to +85°C. The Canbus technology ensures compatibility with your Mercedes' electrical system, preventing error messages or flickering.

Each bulb is engineered for high output and durability. The 35W power consumption is efficient while still providing 20,000 lumens of light. Whether you are driving on dark highways or poorly lit city streets, these xenon headlights give you better visibility and a modern look for your luxury SUV.

Key Features and Benefits

- 35W power consumption that delivers 20,000 lumens for exceptional road illumination

• 6000K white light color that improves contrast and reduces eye fatigue

• Canbus technology that prevents dashboard error warnings and flickering

• IP68 waterproof rating that protects against rain, snow, and car washes

• Aluminum alloy plus turbo fan cooling system that extends bulb lifespan beyond 50,000 hours

• Plug-and-play design for a simple, tool-free installation in your Mercedes

Who Is This For

- Owners of Mercedes GL or ML W164 models from 2010, 2011, or 2012 looking for a direct upgrade

• Drivers who frequently travel on unlit roads and need maximum visibility at night

• Car enthusiasts wanting a modern, white light appearance that matches newer vehicle headlights

• Anyone seeking a reliable, long-lasting replacement for dim or failing factory bulbs

Usage Scenario

Mark drives his 2011 Mercedes ML350 home from work every evening on a winding country road. The factory halogen bulbs had grown dim over time, making it hard to spot deer and sharp curves. After installing these 35W HID xenon bulbs, the road ahead turned bright and clear. The 6000K white light cut through the darkness, and the Canbus system worked flawlessly without any error lights on his dashboard. Now Mark feels confident driving home, even in heavy rain.

Micro Comparison

Compared to standard halogen bulbs, these HID xenon bulbs produce over three times the light output while using similar power. Unlike basic LED replacements that may cause flickering in Mercedes vehicles, the built-in Canbus driver ensures stable operation. The turbo cooling fan also makes these bulbs more durable than passive-cooled alternatives, especially in hot climates or during extended use.

Specifications

Power: 35W

Voltage: 9-32V (fits 12V/24V systems)

Lumens: 20,000LM

Color Temperature: 6000K White

Lifespan: >50,000 hours

Waterproof Rating: IP68

Cooling: Aluminum alloy plus turbo high-speed fan (12,000 RPM)

Working Temperature: -40°C to +85°C

Package Includes

- 2 Pieces HID Headlight Bulbs

Why You Will Love It

You will love the instant confidence these headlights give you on the road. The bright, white light makes nighttime driving feel safer and more comfortable. Plus, the easy installation and long lifespan mean you can set them and forget them for years.

Questions and Answers

Question: Will these bulbs fit my 2012 Mercedes ML350?

Answer: Yes, these bulbs are specifically designed for Mercedes GL and ML W164 models from 2010, 2011, and 2012, including the ML350.

Question: Do I need any extra adapters or wiring for installation?

Answer: No, these bulbs are plug-and-play. They include a Canbus driver that works directly with your Mercedes electrical system without extra parts.

Question: Are these bulbs legal for road use?

Answer: These bulbs are designed for off-road and auxiliary lighting use. You should check your local regulations regarding HID xenon bulbs on public roads.

Question: How bright are these compared to standard halogen bulbs?

Answer: These bulbs produce 20,000 lumens, which is significantly brighter than standard halogen bulbs. They provide a much wider and clearer beam pattern.

Question: Will the 6000K white light look blue or purple?

Answer: No, 6000K produces a pure white light with a very slight hint of blue. It is a natural-looking white that improves visibility without being distracting.

SPECIFICATIONS

Brand Name: other

Charger: no

Choice: yes

Color Name: black

High-concerned chemical: none

Installation Type: Desktop

Origin: Mainland China

Special Features: Adjustable,Anti-slip,Rotatable,One-handed operation

Universal Compatibility

Our LCARS brand holder is designed for universal compatibility, fitting a wide range of devices and making it a versatile addition to your car accessories.

Adjustable Design

With its adjustable design, this multi-purpose mobile stand can be tailored to your specific needs, offering both convenience and functionality.

Sticky Suction Cup

The strong sticky suction cup allows for secure attachment to your dashboard, providing stability even on bumpy roads.

360 Degree Rotation

Experience seamless navigation with our 360-degree rotating car phone holder, ensuring your device is always at the perfect angle.

Key Features

• 360° Rotation — Rotate the mount to any angle you want for landscape or portrait viewing.
• Adjustable Fit — The expandable leg adjusts to fit headrest rods, and the telescoping arms hold devices from 4. 7 to 12. 9 inches.
• One-Handed Use — Secure or release your device with one hand, making it easy to adjust while on the road.
• Foldable Design — Fold the mount flat when not in use, so it tucks away neatly between trips.

Product Specifications

• Brand Name: XMSJ
• Color: Black
• Material: Rubber
• Installation Type: Seat Installation
• Compatible Device Size: 4.7–12.9 inches (diagonal)
• Headrest Rod Distance: 2.8–5.9 inches (70–150 mm)

What It Is / How It Works

This is a car headrest phone and tablet mount that attaches to the metal rods of a vehicle's front seat headrest. It holds devices from 4. 7 to 12. 9 inches, and its 360-degree rotation lets you angle the screen for comfortable viewing from the back seat.

Who It's For / Use Cases

Car headrest mounts suit families on road trips, passengers who want to watch movies or play games hands-free, and anyone who needs a stable spot for a tablet or phone in the back seat. They are also handy for rideshare drivers who want to offer rear-seat entertainment.

How to Use / Care

1. Adjust the expandable leg to match the distance between the two metal rods of the headrest.
2. Hook the mount over the headrest rods and tighten the leg so it sits firmly.
3. Extend the telescoping arms and place your phone or tablet between them.
4. Rotate the mount to your preferred viewing angle before you start driving.

How to Choose

When choosing a car headrest mount, check the distance between the headrest rods on your vehicle. If your car has headrests without metal rods, this type of mount will not work.

Frequently Asked Questions

What size devices does this mount hold?
It holds phones and tablets with a diagonal screen size from 4. 7 to 12. 9 inches, such as most iPads and large smartphones.

Will it fit my car's headrest?
It fits headrests with metal rods spaced 2. 8 to 5. 9 inches (70–150 mm) apart. It does not fit headrests without metal rods, like those in some Volvo models.

Does it protect my device from scratches?
Yes, the soft rubber lining cushions your device and helps prevent friction marks, while the telescoping arms grip it securely to reduce vibration.

Can I rotate the screen?
Yes, the mount rotates 360 degrees, so you can switch between portrait and landscape or angle the screen toward any passenger.

Key Features

• Safe Driving — Holds your phone securely in your line of sight while driving, helping reduce distractions.
• Hands-Free Use — Allows easy operation of your phone without using your hands, making navigation and music switching more convenient.
• Broad Compatibility — Designed to work with various phone models, so you don't need to worry about phone size.
• Stable Hold — Strong suction keeps the phone fixed on different road conditions and helps prevent slipping during drives.

Product Specifications

• Material: Plastic
• Color: As shown
• Size: Reference picture
• Packaging: 1 piece

What It Is / How It Works

This is a rotating car dashboard phone holder with a sticky mount. It holds your phone in your line of sight while driving and lets you operate it hands-free for navigation and music switching.

Who It's For / Use Cases

Car phone holders suit drivers who want quick access to navigation, calls, or music without taking their hands off the wheel. They also help passengers keep phones visible and within reach during trips. Anyone who drives regularly and prefers a stable, convenient spot for their phone can benefit from this type of holder.

How to Use / Care

1. Clean the dashboard surface where you plan to attach the holder so the sticky mount can grip well.
2. Press the sticky mount firmly onto the surface to secure it in place.
3. Place your phone in the holder and adjust the rotating head to your preferred viewing angle.

How to Choose

When choosing a car phone holder, consider the mounting surface in your vehicle. Sticky mounts work best on flat, smooth dashboards. A rotating head adds flexibility for portrait or landscape viewing.

Frequently Asked Questions

What material is this phone holder made of?
This car phone holder is made of plastic.

How many pieces are included in the package?
The package includes one phone holder.

How does this holder help with safe driving?
It holds your phone securely in your line of sight, which helps reduce distractions while driving.

Will this holder fit my phone?
This type of holder is designed to work with various phone models, so you don't need to worry about phone size.

Designed for drivers and passengers who spend long hours on the road, this 360° adjustable cervical pillow delivers ergonomic U-shaped neck support with memory foam side pads — keeping your head, neck, and spine properly aligned on every journey.

• Ergonomic U-shaped design — contours to your neck and supports spinal alignment on long drives
• 360° multi-angle adjustment — suitable for different body types, adults and children
• Memory foam side pads — soft, pressure-relieving support that molds to your shape
• Premium synthetic leather cover — stain-resistant and easy to wipe clean
• Tool-free installation — hook-and-loop system attaches and removes in seconds
• Adjustable mounting rod — fits vertically adjustable metal headrest rods (2.76″–8.66″ range)
• 6 material/color options — Coffee, PVC Beige, Cloth, Black, Grey, PU Leather
• Universal fit — compatible with most car seats including BMW, Mercedes-Benz, and more

Note: Requires a car seat with vertically adjustable metal headrest rods.

Whether you are on a long road trip or a daily commute, neck fatigue should not be part of the journey. This 360° adjustable memory foam headrest pillow wraps your neck in cool, breathable ice-silk fabric and molds to your shape for personalized support for both kids and adults.

This headrest pillow is designed to make every drive more comfortable. The memory foam filling conforms to your neck shape and relieves pressure points, while the ice-silk fabric cover stays soft, breathable, and cool to the touch even on warm days. The 360° adjustable design lets you rotate and tilt the pillow to find your perfect support angle, and the durable ABS frame with synthetic fiber holds its shape over time. It attaches easily to most car headrest posts, making it a universal fit for any vehicle.

Available in Brown and Black to match your interior, this small upgrade can transform your driving experience. It is suitable for both kids and adults, so every passenger can enjoy a more relaxed ride.

Key Features and Benefits

- 360° adjustable design that rotates and tilts to find your perfect support angle

• Memory foam filling that conforms to your neck shape and relieves pressure points

• Ice-silk fabric cover that is soft, breathable, and cool to the touch even on warm days

• ABS frame with synthetic fiber for a durable structure that holds its shape over time

• Suitable for kids and adults for a versatile fit for all passengers

• Universal fit that attaches easily to most car headrest posts

Who Is This For

- Drivers and passengers who want better neck support during long road trips

• Daily commuters looking for relief from neck fatigue on short drives

• Families who need a headrest pillow that fits both kids and adults

• Anyone who wants a cool, breathable fabric that feels comfortable even on warm days

Usage Scenario

Sarah drives 45 minutes to work each day and often arrives with a stiff neck. She tried using a rolled-up sweater, but it never stayed in place. After installing this 360° adjustable memory foam headrest pillow, she can rotate it to the perfect angle for her neck. The ice-silk fabric keeps her cool during summer commutes, and she no longer feels sore by the time she parks.

Micro Comparison

Basic headrest pillows often have a fixed shape that does not adjust to your body or seating position. This pillow offers a 360° adjustable design that lets you rotate and tilt it for a customized fit, so you are not stuck with one angle. The memory foam filling provides pressure relief that standard foam pillows cannot match, and the ice-silk fabric stays cooler than typical polyester covers.

Specifications

- Material: Memory foam filling, ice-silk fabric cover, ABS frame, synthetic fiber

• Color: Brown, Black

• Design: 360° adjustable

• Fit: Universal fit for most car headrest posts

Package Includes

- 1 x 360° Adjustable Memory Foam Car Headrest Pillow

Why You Will Love It

You will love how this pillow turns every drive into a more relaxing experience. The 360° adjustment lets you find your ideal angle in seconds, and the memory foam molds to your neck for personalized comfort. The cool ice-silk fabric keeps you comfortable even on hot days, making it a simple upgrade that makes a big difference.

Questions and Answers

Question: Does this headrest pillow fit all car seats?

Answer: Yes, it has a universal fit and attaches easily to most car headrest posts.

Question: Is the cover removable and washable?

Answer: The ice-silk fabric cover is designed to stay cool and breathable. For cleaning, spot clean with a damp cloth and mild soap.

Question: Can children use this pillow?

Answer: Yes, the pillow is suitable for both kids and adults.

Question: How does the 360° adjustment work?

Answer: The pillow rotates and tilts so you can find the angle that supports your neck best.

Question: What colors are available?

Answer: This pillow is available in Brown and Black.

This magnetic car phone holder offers a secure, hands-free way to keep your smartphone visible while driving. Designed for MagSafe-compatible devices and Android phones with a magnetic ring, it provides a strong hold and easy one-handed operation. The 360-degree rotation lets you switch between portrait and landscape views, making navigation, calls, and music control simple and safe.

Built with a durable aluminum alloy and ABS construction, this mount is both lightweight and sturdy. It includes both an air vent clip and a dashboard adhesive base, giving you flexible mounting options to suit your vehicle. The sleek black finish blends well with most car interiors, including Tesla models and other modern vehicles.

Whether you are a daily commuter, a rideshare driver, or someone who relies on GPS for road trips, this holder is designed to keep your phone secure on bumpy roads and sharp turns. The quick-release button allows you to detach your phone instantly, while the anti-slip design prevents shaking or sliding during use.

This mount is compatible with a wide range of smartphones, including iPhone 16, 15, 14, 13, 12, and earlier models with magnetic cases, as well as Samsung, Huawei, OnePlus, and other Android devices when used with the included metal ring. It supports wireless charging without interference, so you can keep your device powered up while it is mounted.

Key Features and Benefits

- 360-degree rotatable ball joint that allows you to adjust your phone to any angle for optimal viewing

• Strong built-in magnets that hold MagSafe-compatible iPhones and Android phones securely in place

• Durable aluminum alloy and ABS construction that resists rust, heat, and cold for long-lasting use

• Dual mounting options with an air vent clip and a dashboard adhesive base for flexible installation

• One-handed operation that makes it easy to attach or remove your phone while driving

• Quick release button that lets you detach your device instantly when needed

• Anti-slip and shock-proof design that keeps your phone stable even on rough roads

• Lightweight and foldable structure that makes it easy to store or carry when not in use

Who Is This For

- Tesla Model 3, Y, S, and X owners looking for a sleek and functional phone mount

• Daily commuters who use GPS navigation and need quick access to their phone

• Rideshare and delivery drivers who rely on hands-free calling and app usage

• Anyone who wants a strong magnetic phone holder that works with iPhone and Android devices

Usage Scenario

Sarah drives a Tesla Model Y and uses her iPhone 15 Pro for GPS every day. Before she had this mount, her phone would slide off the dashboard or get tangled in charging cables. Now she simply snaps her phone onto the magnetic holder, rotates it to landscape mode for maps, and drives with confidence. The mount stays firm even on bumpy roads, and she can take calls hands-free without reaching for her phone.

Micro Comparison

Unlike many plastic phone holders that loosen over time, this mount uses an aluminum alloy and ABS construction for lasting durability. Its 360-degree rotation gives you more viewing flexibility than fixed-angle mounts, and the dual mounting options let you choose between air vent or dashboard placement. The strong magnetic grip holds your phone securely without the need for clamps or arms that can block your screen.

Specifications

Material: Aluminum Alloy + ABS

Mount Type: Magnetic

Rotation: 360° full swivel

Mounting Location: Air Vent / Dashboard

Color Options: Black

Width: 7 cm / 2.8 in

Special Features: Lightweight, Adjustable, Anti-slip, Foldable, Rust-proof, Heat resistant, Rotatable, Cold resistant, Ergonomics, Hands-free, One-handed operation, Quick release button, Scratch Resistant, Shock Proof, Tilt Head

Package Includes

- 1 x 360° Magsafe Magnetic Phone Holder

• 1 x Air Vent Clip Base

• 1 x Dashboard Adhesive Mount

• 1 x Magnetic Metal Ring (for non-MagSafe phones)

• 1 x User Manual

Why You Will Love It

This mount gives you the freedom to drive without fumbling for your phone. It combines a strong magnetic hold with flexible positioning, so you can focus on the road while staying connected. Plus, its sleek design and premium materials make it a stylish addition to any car interior.

Questions and Answers

Question: Will this holder work with a thick phone case?

Answer: It works best with MagSafe-compatible cases or thin cases. For thicker cases, you can use the included metal ring to improve the magnetic connection.

Question: Can I use this mount with a Samsung Galaxy phone?

Answer: Yes, if your Samsung phone has a magnetic case or you attach the included metal ring, it will hold securely.

Question: Does this mount block the air vent when installed?

Answer: The vent clip is designed to allow some airflow, but it may partially block the vent depending on your car model.

Question: Is the adhesive base removable without leaving residue?

Answer: The adhesive base is strong for a secure hold. Removing it may leave some residue, but it can be cleaned with alcohol.

Question: Does this holder support wireless charging?

Answer: Yes, the magnetic design does not interfere with wireless charging as long as your phone is compatible.

Keep your phone secure and within easy reach while driving with this 360° rotating magnetic car phone holder. Its foldable design and strong magnetic grip make it a reliable choice for navigation, hands-free calls, and quick access to your phone on the road.

This mount is built for convenience. The 360° rotation lets you switch between portrait and landscape views effortlessly, so you can follow GPS directions or watch media at the perfect angle. The foldable structure means it takes up minimal space when not in use, keeping your dashboard clean and uncluttered.

The strong magnetic hold keeps your smartphone firmly attached, even on bumpy roads. Installation is simple and requires no tools, so you can set it up in seconds and start using it right away. It is compatible with all smartphones, making it a versatile addition to any vehicle.

Designed for daily drivers and long-distance travelers alike, this magnetic mount offers a stable and adjustable solution for mobile navigation. Its compact, foldable body ensures it fits neatly in your car without blocking your view or interfering with air vents.

Key Features and Benefits

- 360° rotation that lets you adjust your phone to the best viewing angle for navigation or entertainment

• Foldable design that stores compactly when not in use and keeps your dashboard organized

• Strong magnetic hold that keeps your phone secure during drives on uneven roads

• Easy tool-free installation that allows you to mount it on your dashboard in seconds

• Compatible with all smartphones so you can use it with any device without needing extra accessories

Who Is This For

- Daily commuters who need quick and easy access to their phone for navigation

• Rideshare drivers who rely on hands-free operation for maps and calls

• Long-distance travelers who want a stable phone mount for extended trips

• Anyone who prefers a magnetic mount for fast one-handed phone attachment and release

Usage Scenario

Mark drives for a rideshare service and was tired of fumbling with a clip-style mount that kept slipping. He switched to this magnetic car phone holder and now just places his phone on the mount, and it stays put. The 360° rotation lets him tilt the screen toward the passenger side when someone needs to see the route. When he finishes his shift, he folds the mount flat against the dashboard, and it disappears from sight.

Micro Comparison

Unlike clip-based mounts that can be slow to operate and may block air vents, this magnetic holder offers instant attachment and a foldable design that saves space. Its 360° rotation gives you more flexibility in positioning compared to fixed-angle mounts, so you can always find the best view without adjusting your seat or the mount itself.

Specifications

- Charger: No

• Choice: Yes

Package Includes

- 1 x 360° Rotating Magnetic Car Phone Holder

Key Features

• Magnetic Hold — A magnetic design lets you attach and release your phone quickly.
• Rotatable Angle — The holder rotates so you can adjust the viewing angle while driving.
• Lightweight Build — Made from ABS+PC, the mount stays light on your dashboard or windshield.
• Scratch Resistant — The surface resists scratches from daily handling and contact with keys or coins.
• Shock Proof — Built to absorb minor bumps and vibrations while you drive.

Product Specifications

• Material: ABS+PC
• Color: Black
• Installation Type: Wall-mounted
• Applicable Locations: Car (center console/dashboard/windshield/smart screen), home (desktop/ceramic surface/glass panel)

What It Is / How It Works

This is a magnetic vacuum car phone holder that uses suction and magnetic force to secure your phone on smooth surfaces like dashboards, windshields, or glass panels. It combines vacuum suction with a magnetic mount for a firm grip.

Who It's For / Use Cases

Drivers who want hands-free access to navigation, calls, or music while on the road will find this type of mount useful. It also suits passengers or home users who need a stable spot to hold a phone on a desk or glass surface.

How to Use / Care

1. Clean the mounting surface with the included alcohol pack to remove dust and grease.
2. Press the suction cup firmly against the surface and twist the lock to create a vacuum seal.
3. Attach your phone to the magnetic plate, or use the included metal ring if your phone lacks a magnetic back.
4. Adjust the angle and tighten the knob to keep your phone in view.

How to Choose

When choosing a car phone holder, consider the mounting surface in your vehicle. Suction cup mounts work best on smooth, non-porous areas like glass or dashboards. Check the weight and size of your phone to ensure the mount can hold it securely.

Frequently Asked Questions

Will the magnet interfere with my phone's signal?
The magnetic field is designed not to interfere with signals, even when a phone case is on.

How do I remove my phone from the holder?
Side buttons release the device effortlessly, and a buzz indicates correct adhesion.

Is this holder compatible with all phones?
It is versatile and accommodates various devices. For non-magnetic phones or cases, a metal ring is included to enable magnetic attachment.

What comes in the package?
The package includes one magnetic vacuum car phone holder, two magnets, one alcohol pack, one mirror sticker, and one hexagonal wrench.

Keep your Haval DARGO, GreatWall POER, or Tank 300 running safely with this 4-pack of TPMS sensors. These direct-fit replacements monitor your tire pressure in real time, helping you avoid flats and maintain fuel efficiency. Each sensor is pre-programmed for your specific vehicle model and year, so installation is straightforward.

These sensors are designed to replace the original equipment on your vehicle. They operate at a frequency of 433MHz and come ready to install. Once installed, they will transmit tire pressure data directly to your vehicle's onboard system, alerting you to any pressure changes. This helps you keep your tires properly inflated for a safer, more efficient drive.

Each sensor is built with a long-life battery that lasts approximately three years under normal driving conditions. The set includes four sensors, enough to cover all your wheels. The installation process involves activating the sensors with a compatible scan tool or by following your vehicle's re-learning procedure. This ensures a seamless integration with your car's existing TPMS system.

Whether you are replacing a faulty sensor or upgrading an older set, this 4-pack offers a complete solution. Having all four sensors ensures consistent monitoring across your vehicle. This simple upgrade gives you peace of mind on every trip.

Key Features and Benefits

- Direct fit for Haval DARGO, GreatWall POER, and Tank 300 that ensures a simple replacement process.

• 433MHz operating frequency that provides reliable, real-time tire pressure data to your vehicle's system.

• Long-life battery lasting about 3 years that reduces the need for frequent replacements.

• Pre-programmed for your specific make, model, and year that saves you time on setup and programming.

• 4-sensor set that covers all wheels for complete tire pressure monitoring.

Who Is This For

- Owners of Haval DARGO, GreatWall POER, or Tank 300 vehicles from 2021-2022.

• Drivers looking to replace a faulty or dead TPMS sensor in their vehicle.

• Anyone wanting to maintain proper tire pressure for better safety and fuel economy.

• DIY mechanics or professional installers needing a direct-fit replacement sensor kit.

Usage Scenario

Mark noticed his GreatWall POER's tire pressure warning light flickering on his morning commute. After checking the pressure manually, he found one tire was consistently low. He ordered this 4-pack of TPMS sensors to replace all his original units. After a quick installation and re-learning procedure using his local shop's scan tool, the warning light turned off. Now Mark gets accurate pressure readings on his dashboard every time he drives, giving him confidence on the road.

Micro Comparison

Unlike universal TPMS sensors that require complex programming and may not communicate correctly with your vehicle, these sensors are pre-programmed specifically for Haval DARGO, GreatWall POER, and Tank 300 models. This direct-fit design eliminates the guesswork and ensures a reliable connection with your car's system. You get a seamless replacement that works just like the original part.

Specifications

- Model Number: 3641101XKN01A

• OEM Number: 3641100XKN01A

• Frequency: 433MHz

• Battery Life: About 3 years

Package Includes

- 4 x TPMS Tire Pressure Monitor Sensors

Why You Will Love It

You will love the peace of mind that comes from knowing your tire pressure is always monitored. This simple upgrade helps you avoid unexpected flats and keeps your vehicle running efficiently. It is a smart, hassle-free way to maintain your safety on every drive.

Questions and Answers

Question: What is the frequency of these TPMS sensors?

Answer: The sensors operate at a frequency of 433MHz.

Question: Do these sensors need to be programmed before installation?

Answer: The sensors come pre-programmed specifically for your vehicle's make, model, and year. They need to be activated using a scan tool or by following your vehicle's re-learning procedure.

Question: What is the battery life of these sensors?

Answer: The battery life is about 3 years under normal driving conditions.

Question: What vehicles are these sensors compatible with?

Answer: They are compatible with Haval DARGO (2020-2021), GreatWall POER (2021+), and GreatWall Tank 300 (2020-2021).

Question: Do I need a special tool to install these sensors?

Answer: Installation requires a trigger tool or scan tool to activate the sensors and complete the re-learning procedure for your vehicle.

SPECIFICATIONS

Brand: Neebrc

Brand Name: NeebRC

Certification: CE

Choice: yes

For Vehicle Type: Cars

Four-wheel Drive Attributes: Assemblage

High-concerned chemical: none

Is Batteries Included: No

Is Electric: No battery

Is it battery/power supply: N

Is it charger/adapter: N

Material: Metal

Model Number: 370

Origin: Mainland China

Product Name: 370 Brushed Motor

Quantity: 1 pcs

RC Parts & Accs: Motors

Recommend Age: 14+y

Remote Control Peripherals/Devices: ESC

Tool Supplies: Assembly Category

Upgrade Parts/Accessories: motor

Use: Vehicles & Remote Control Toys

SPECIFICATIONS

Brand: Neebrc

Brand Name: NeebRC

Certification: CE

Choice: yes

For Vehicle Type: Cars

Four-wheel Drive Attributes: Assemblage

High-concerned chemical: none

Is Batteries Included: No

Is Electric: No battery

Is it battery/power supply: N

Is it charger/adapter: N

Material: Metal

Model Number: 370

Origin: Mainland China

Product Name: 370 Brushed Motor

Quantity: 1 pcs

RC Parts & Accs: Motors

Recommend Age: 14+y

Remote Control Peripherals/Devices: ESC

Tool Supplies: Assembly Category

Upgrade Parts/Accessories: motor

Use: Vehicles & Remote Control Toys

SPECIFICATIONS

Brand Name: NONE

High-concerned chemical: none

Material: ABS

OEM NO.: 39822685

Origin: Mainland China

Placement on Vehicle: Front