Keep your Ford's tire pressure monitoring system working at its best with these 433MHz TPMS sensors. They come pre-programmed to match your specific Ford model, so you can replace a faulty or dead sensor without complex setup. This set of four sensors gives you everything needed for a full replacement on compatible vehicles.

Each sensor is built with a PCBA board and battery for reliable performance. The 433MHz frequency ensures a stable connection with your vehicle's onboard system. These sensors are designed to directly replace the original part numbers F2GT-1A180-CB, F2GT-1A180-CC, F2GT-1A180-CD, and F2GT-1A180-CE, making installation straightforward for a trained professional.

Driving with a malfunctioning TPMS sensor can lead to inaccurate tire pressure readings, which affects fuel efficiency, tire wear, and overall safety. By replacing all four sensors at once, you restore the accuracy of your tire pressure monitoring system and gain peace of mind on every trip. The sensors are 100% new and ready to install.

Activation requires the EL-50449 tool after installation. This tool allows the vehicle to recognize the new sensors, completing the relearn process. We recommend having the installation and activation performed by a trained professional to ensure everything works correctly.

Key Features and Benefits

- Pre-programmed for specific Ford models that simplifies the replacement process

• 433MHz operating frequency that provides a stable connection with your vehicle's TPMS system

• 100% new sensors that deliver reliable performance and long service life

• Compatible with multiple OEM part numbers including F2GT-1A180-CB through F2GT-1A180-DE that ensures a direct fit for many Ford vehicles

• Set of four sensors that allows a complete system replacement at once

Who Is This For

- Ford owners who need to replace a dead or failing TPMS sensor on compatible models like Edge, Explorer, Fiesta, Focus IV, Mustang, or Tourneo Connect

• Drivers who want to restore accurate tire pressure monitoring for improved safety and fuel economy

• Vehicle owners who prefer a pre-programmed sensor to avoid the need for manual programming

• Anyone performing a full set of four TPMS sensor replacements to ensure all sensors are at the same age

Usage Scenario

Mark noticed the TPMS warning light on his 2018 Ford Focus IV dashboard had been on for a week. After checking his tire pressures manually and finding them correct, he knew one of the sensors had failed. He ordered this set of four sensors and had his mechanic install them. After the EL-50449 activation tool was used to complete the relearn process, the warning light turned off and stayed off. Mark now drives with confidence knowing his tire pressure readings are accurate again.

Micro Comparison

Unlike generic TPMS sensors that require manual programming for each vehicle, these sensors come pre-programmed for your specific Ford make, model, and year. This saves you time and reduces the chance of setup errors. The set includes four sensors, making it a convenient option for a full replacement compared to buying individual sensors that may not match.

Specifications

Material: PCBA board and battery

Model Number: F2GT-1A180-CB F2GT-1A180-CC F2GT-1A180-CD

OEM NO.: F2GT-1A180-CE

Frequency: 433MHz

Package Includes

- 4 x TPMS Tire Pressure Sensors

Why You Will Love It

You will love the straightforward replacement process these pre-programmed sensors offer. No complex programming steps are needed, just install and activate with the EL-50449 tool. You will also appreciate the peace of mind that comes from having a full set of four new sensors working together to keep your tire pressures accurate and your driving safe.

Questions and Answers

Question: Do these sensors come pre-programmed for my Ford vehicle?

Answer: Yes, these sensors are pre-programmed specifically for your Ford make, model, and year. You do not need to program them yourself.

Question: What tool do I need to activate these sensors after installation?

Answer: You need the EL-50449 activation tool to complete the relearn process after installation. This tool allows your vehicle to recognize the new sensors.

Question: Can I install these sensors myself?

Answer: Installation of TPMS sensors is recommended to be performed only by trained professionals. They have the tools and experience to install the sensors correctly and safely.

Question: Which Ford models are these sensors compatible with?

Answer: These sensors are compatible with many Ford models including Edge, Explorer, Fiesta, Fiesta Van, Focus IV, Galaxy, Mondeo, Mustang, Mustang Mach-E, Ranger, S-Max, Tourneo Connect, Tourneo Custom, Transit Connect, Transit Custom, and Ecosport. Please check the specific years listed in the product details to confirm fitment.

Question: How do I know if these sensors will fit my car?

Answer: Check the part number on your old sensor. These sensors match OEM numbers F2GT-1A180-CB, F2GT-1A180-CC, F2GT-1A180-CD, and F2GT-1A180-CE. If you are unsure, contact us before placing your order with your vehicle details.

Keep your Chevrolet Orlando running safely with this set of four 433MHz TPMS sensors. Designed specifically for models from 2010 to 2018, these sensors provide accurate tire pressure readings to help you maintain proper inflation and avoid dangerous blowouts. Each sensor is a direct replacement for part numbers 13581561 and 20922901, making installation straightforward.

These TPMS sensors come pre-programmed for your vehicle, so you do not need to do any complex programming. A simple re-learning procedure using an OBDII scan tool gets them working with your car's onboard system. The sensors are built with a PCBA board and battery for reliable long-term performance.

Driving with properly inflated tires improves fuel economy and extends tire life. These sensors give you real-time pressure updates directly on your dashboard, so you always know your tire status. Whether you are commuting daily or taking a long road trip, this TPMS set adds a layer of safety and convenience.

Each sensor is 100% new and ready to install. Professional installation is recommended to ensure correct fitment and function. Confirm your vehicle's compatibility using the OE numbers listed before ordering to guarantee a perfect match.

Key Features and Benefits

- 433MHz frequency that ensures reliable communication with your vehicle's TPMS system

• Pre-programmed for specific make and model so no sensor programming is required

• Direct replacement for OE numbers 13581561 and 20922901 for a hassle-free swap

• PCBA board and battery construction for durable and consistent performance

• Compatible with Chevrolet Orlando from 2010-11 to 2018-06 for a precise fit

Who Is This For

- Chevrolet Orlando owners with model years 2010 to 2018 needing replacement TPMS sensors

• Drivers who want to maintain proper tire pressure for better fuel economy and safety

• Car enthusiasts looking for a direct-fit, pre-programmed TPMS solution without extra programming steps

• Workshops and mechanics seeking reliable replacement sensors for customer vehicles

Usage Scenario

Mark noticed his Chevrolet Orlando's tire pressure warning light flickering on cold mornings. After checking his tires with a gauge, he found two were slightly low. Instead of guessing, he installed this set of four TPMS sensors. Within minutes of using his OBDII tool for the re-learn procedure, his dashboard showed accurate pressure readings for all four tires. Now he drives with confidence, knowing his tires are properly inflated for every trip.

Micro Comparison

Unlike universal TPMS sensors that require complex programming and special tools, these sensors arrive pre-programmed for your Chevrolet Orlando. You only need an OBDII scan tool for the re-learning process, which is simpler than programming from scratch. This saves time and reduces the chance of installation errors, making it a practical choice for DIYers and professionals alike.

Specifications

Material: PCBA board and battery

Frequency: 433MHz

OE Numbers: 13581561, 20922901

Compatible Models: Chevrolet Orlando (2010-11 to 2018-06)

Package Includes

- 4 x TPMS Sensors

Why You Will Love It

You will love the peace of mind that comes from knowing your tire pressure is always accurate. These sensors help you avoid unexpected flats and improve your car's handling. With a simple installation process and direct-fit design, you can get back on the road quickly and safely.

Questions and Answers

Question: Do I need to program these sensors before installing them?

Answer: No, they come pre-programmed for your vehicle. You only need to perform a re-learn procedure using an OBDII tool.

Question: Will these sensors work on my 2015 Chevrolet Orlando?

Answer: Yes, they are compatible with Chevrolet Orlando models from 2010-11 to 2018-06, including your 2015.

Question: What is the frequency of these sensors?

Answer: They operate at 433MHz, which is standard for many GM vehicles.

Question: Can I install these sensors myself?

Answer: Professional installation is recommended, but if you have the right tools and experience, you can install them yourself.

Question: How do I know if these sensors fit my car?

Answer: Check the OE numbers 13581561 or 20922901 on your original sensor. If they match, these will fit your vehicle.

Keep your tires at the right pressure and drive with confidence. This set of 4 pre-programmed 433MHz TPMS sensors is a direct replacement for many Chevrolet, Opel, and Vauxhall models. No sensor programming is required, making installation straightforward for trained professionals.

These sensors come ready to work with your vehicle. They match original equipment part numbers like 13581560, 13598775, and 13327259, ensuring a proper fit for your specific make and model. The sensors need to be activated using a scan tool or a re-learning procedure after installation.

Each sensor is built to last with a battery life of about 3 years. They operate at a frequency of 433MHz, which is the standard for many modern vehicles. This set includes four sensors, enough to replace all the sensors in your car at once for consistent monitoring.

Driving with properly inflated tires improves fuel efficiency, extends tire life, and enhances safety. By replacing faulty or dead TPMS sensors, you restore the ability to monitor your tire pressure directly from your dashboard, helping you avoid unexpected tire issues on the road.

Key Features and Benefits

- Pre-programmed for specific vehicle models that eliminates the need for complex programming before installation

• 433MHz operating frequency that matches the standard system used in many Chevrolet, Opel, and Vauxhall vehicles

• Battery life of about 3 years that provides long-term, reliable tire pressure monitoring

• Replaces OE part numbers 13581560, 13598775, 13327259, 13348393, and 13581562 for a direct fit

• Set of 4 sensors that allows for a complete system replacement at one time

Who Is This For

- Owners of Chevrolet Corvette C7 (2014-2019), Chevrolet Volt (2011-2017), and Opel/Vauxhall models needing a TPMS replacement

• Drivers looking for a direct replacement sensor that matches original factory

specifications

- Car owners who want to restore their dashboard tire pressure monitoring system without visiting a dealership

• Mechanics and auto shops seeking a reliable, pre-programmed sensor option for multiple vehicle brands

Usage Scenario

Mark noticed the tire pressure warning light on his Opel Astra J dashboard would not turn off, even after checking and inflating all tires. After a quick scan, his mechanic confirmed the original TPMS sensors had failed. Mark ordered this set of four pre-programmed sensors. His mechanic installed them, performed a quick re-learn procedure with a scan tool, and the warning light disappeared. Now Mark can see his tire pressures on the dashboard again, giving him peace of mind on his daily commute.

Micro Comparison

Some aftermarket TPMS sensors require you to program them with a separate tool before installation, which adds time and complexity. These sensors come pre-programmed for your specific vehicle, saving you a step. While universal sensors can be tricky to set up, this set is designed to match the exact frequency and fitment of your original equipment, providing a more straightforward replacement experience.

Specifications

Material: tire pressure monitoring system

Operating Frequency: 433MHz

Battery Life: About 3 years

OE Part Numbers: 13581560, 13598775, 13327259, 13348393, 13581562

Model Numbers: 13598775, 13327259, 13348393, 13581560, 13581562

Package Includes

- 4x TPMS Sensors

Why You Will Love It

You will love the simple replacement process since these sensors come pre-programmed for your car. You can restore your vehicle's tire pressure monitoring system without a trip to the dealership. This set gives you a complete solution for all four wheels, helping you maintain safe and efficient driving conditions.

Questions and Answers

Question: Do I need to program these sensors before installing them?

Answer: No, these sensors come pre-programmed for your specific vehicle make and model. You only need to activate them using a scan tool or perform a re-learning procedure after installation.

Question: What is the operating frequency of these sensors?

Answer: These sensors operate at 433MHz, which is the standard frequency for many Chevrolet, Opel, and Vauxhall vehicles.

Question: How long does the battery in these sensors last?

Answer: The battery life is about 3 years under normal driving conditions.

Question: Will these sensors fit my Opel Zafira Tourer?

Answer: These sensors fit Opel Zafira Tourer C models from 2011-11 to 2020-01. Please check your vehicle's year and model against the full application list to confirm fitment.

Question: Can I install these sensors myself?

Answer: Installation of TPMS sensors is recommended to be performed only by trained professionals. The sensors need to be mounted inside the tire and then activated with a scan tool.

Keep your tires at the right pressure with this set of four 433MHz TPMS sensors. Designed as a direct replacement for specific Chevrolet and Cadillac models, this tire pressure monitor system helps you stay aware of your tire conditions while driving. Each sensor is built to last and provides reliable data to your vehicle's monitoring system.

These TPMS sensors are a brand new, high quality replacement for your vehicle's original equipment. They operate at a frequency of 433MHz and are designed for a straightforward installation process. The sensors are made from a durable combination of ABS and metal, ensuring they can withstand the demands of the road. With an expected battery life of about three years, you can install them and enjoy peace of mind for many miles.

Maintaining correct tire pressure is key to safe driving, fuel efficiency, and tire longevity. This system alerts you when pressure drops, helping you avoid potential issues before they become serious. The sensors are a practical upgrade for any compatible vehicle, offering a simple way to keep your tire pressure monitoring system working as it should.

This set includes four sensors, enough to replace all the sensors on your vehicle at once. The part number 13589256 ensures compatibility with a range of Chevrolet and Cadillac models from specific years. For a smooth experience, confirm your vehicle's part number matches before ordering.

Key Features and Benefits

- 433MHz operating frequency that ensures reliable communication with your vehicle's monitoring system

• Direct replacement design that makes installation straightforward for a professional mechanic

• ABS and metal construction that provides durability against road conditions and weather

• About three years of battery life that offers long-term, maintenance-free use

• Set of four sensors that allows you to replace all sensors at once for consistent performance

Who Is This For

- Owners of compatible Chevrolet models like Captiva, Aveo, Malibu, Orlando, and Spark from specific years who need a TPMS sensor replacement

• Cadillac CTS, SRX, and XTS owners looking for a direct replacement part with the 13589256 OE code

• Drivers who want to maintain proper tire pressure for safety, fuel economy, and even tire wear

• Anyone replacing a faulty or dead TPMS sensor with a new, reliable unit for their vehicle

Usage Scenario

Mark noticed his Chevrolet Malibu's tire pressure warning light was flickering on and off. After a quick check, he found one sensor was failing. Instead of visiting a dealer for a costly replacement, he ordered this set of four sensors. He took the car to his local mechanic, who installed them in under an hour. Now, Mark's dashboard shows accurate tire pressure for all four tires, and the warning light stays off. He feels more confident driving on the highway, knowing his tires are properly monitored.

Micro Comparison

While other aftermarket sensors may require complex programming or adapters, these 433MHz TPMS sensors are designed as a direct replacement for your vehicle's original part number 13589256. They are built with quality materials and offer a reliable fit for compatible Chevrolet and Cadillac models. Choosing this set gives you a straightforward solution without the guesswork of universal sensors.

Specifications

- Product Type: Car TPMS Sensor

• Material: ABS + Metal

• Color: As shown in pictures

• Operating Frequency: 433MHz

• Battery Life: About 3 Years

• Part Number: 13589256

• Installation Method: Direct Replacement

Package Includes

- 4 x TPMS Tire Pressure Sensor

Keep your tire pressure monitoring system working correctly with this set of four 433MHz TPMS sensors. Designed to fit specific Hyundai and Kia models, these sensors come pre-programmed and ready to install, helping you maintain proper tire pressure and improve driving safety.

These TPMS sensors are direct replacements for several OEM part numbers, including 52933-3N100, 52933-2M650, and others. They are built with a PCBA board and battery for reliable performance. No sensor programming is required, but you will need to activate them using a scan tool or perform a relearn procedure, typically with an OBDII tool.

Each sensor matches the original specifications for your vehicle, ensuring a straightforward installation. It is recommended to have a trained professional install the sensors to guarantee proper fit and function. Always confirm your vehicle's part number before ordering to ensure compatibility.

Key Features and Benefits

- 433MHz frequency that works with your vehicle's existing TPMS system for accurate tire pressure readings

• Pre-programmed for your specific make, model, and year, so no additional programming is needed before installation

• Compatible with multiple OEM part numbers like 52933-2J100, 52933-2M600, and 52933-A5100, giving you a reliable replacement option

• Direct fit design that matches original equipment specifications for a simple swap

• Built with a PCBA board and battery for consistent and long-lasting performance

Who Is This For

- Owners of Hyundai Equus models from 2009 to 2016 who need to replace faulty or dead TPMS sensors

• Drivers of compatible Hyundai and Kia vehicles, including Genesis G80, Santa Fe, Sorento, and many others

• Car owners who want a pre-programmed sensor for a hassle-free replacement without needing to visit a dealership

• DIY mechanics or professional installers looking for a direct-fit TPMS sensor for multiple vehicle models

Usage Scenario

Mark noticed the tire pressure warning light on his 2014 Hyundai Genesis dashboard staying on, even after checking and inflating the tires. After a quick diagnostic, he found that the original TPMS sensors had failed due to age. He ordered this set of four sensors, confirmed the part number matched his vehicle, and had a local tire shop install them. The mechanic used an OBDII tool to perform the relearn process, and the warning light was gone. Mark now drives with confidence, knowing his tire pressure is being monitored accurately.

Micro Comparison

Unlike generic TPMS sensors that require complex programming or cloning, these sensors come pre-programmed for your specific vehicle. This saves you time and effort during installation. While some aftermarket sensors may need additional adapters or modifications, these are designed as direct replacements for the original equipment, making the swap straightforward.

Specifications

Material: PCBA board and battery

Frequency: 433MHz

Compatible OEM Part Numbers: 52933-2J100, 52933-2M600, 52933-3N100, 52933-A5100, 52933-2M650, 52933-B1100

Package Includes

- 4 x TPMS Sensors

Why You Will Love It

You get a complete set of four sensors that are ready to install, saving you the trouble of buying individual units. The pre-programmed design means you can avoid the extra cost and complexity of programming tools. With broad compatibility across many Hyundai and Kia models, these sensors offer a practical and reliable solution for maintaining your vehicle's tire pressure monitoring system.

Questions and Answers

Question: Do these sensors need to be programmed before installation?

Answer: No, these sensors come pre-programmed for your specific vehicle make, model, and year. No additional programming is required before installation.

Question: How do I activate the sensors after installing them?

Answer: You need to use a scan tool or perform a relearn procedure. This is typically done with an OBDII tool.

Question: Will these sensors work on my 2016 Hyundai Equus?

Answer: Yes, these sensors are designed for the Hyundai Equus from 2009-07 to 2016-04. Please confirm your part number matches one of the listed OEM numbers before ordering.

Question: Can I install these sensors myself?

Answer: Installation is recommended to be performed by a trained professional to ensure correct fit and function.

Question: What if I order the wrong sensor for my car?

Answer: Please confirm the part number before purchase. If you are unsure, contact us before ordering. We cannot refund for incorrect orders.

Replace worn or faulty tire pressure sensors with this set of 4 pre-programmed 433MHz TPMS sensors. Designed for a wide range of vehicles including Alpine, Lada, Nissan, and Renault models, these sensors come ready to install with no programming required. They help you maintain proper tire pressure for safer driving and better fuel efficiency.

Keeping your tires at the correct pressure is essential for safety, handling, and fuel economy. These TPMS sensors provide accurate real-time pressure monitoring so you can spot a slow leak or pressure drop before it becomes a problem. Each sensor is 100% new and pre-programmed for your specific vehicle make and model, which means you can install them without needing to program them first.

The sensors operate at 433MHz and are built to last with a battery life of about 3 years. They are a direct replacement for a wide range of OEM part numbers, making them a practical choice for owners of multiple vehicle brands. After installation, the sensors will need to be activated using a scan tool or by performing a relearn procedure, which is best done by a trained professional.

This set includes four sensors, enough to replace all the TPMS sensors on your vehicle at once. Consistent tire pressure monitoring across all four wheels gives you peace of mind on every drive, whether you are commuting, running errands, or heading out on a longer trip.

Key Features and Benefits

- Pre-programmed for your vehicle that saves you time and hassle, no sensor programming is needed before installation.

• 433MHz operating frequency that is compatible with the TPMS systems in many European and Asian vehicles.

• Battery life of about 3 years that provides long-term reliable performance before replacement is needed.

• 100% brand new sensors that give you the reliability of fresh components rather than used or refurbished parts.

• Direct fit for many Nissan, Renault, Lada, and Alpine models that makes it easy to find the right replacement for your car.

Who Is This For

- Owners of compatible Alpine, Lada, Nissan, or Renault vehicles who need to replace a faulty or dead TPMS sensor.

• Drivers who want to replace all four sensors at once to ensure consistent and accurate tire pressure monitoring.

• Car owners who prefer pre-programmed sensors to simplify the installation process and avoid complex setup steps.

• Workshops or mechanics looking for a reliable aftermarket TPMS sensor option for multiple customer vehicles.

Usage Scenario

David noticed the tire pressure warning light on his Nissan Leaf stayed on even after he checked and inflated all four tires. He knew the sensors were original to the car and had probably reached the end of their battery life. Instead of visiting a dealership for an expensive replacement, he ordered this set of four pre-programmed sensors. After a quick installation by his local mechanic and a relearn procedure with a scan tool, the warning light went off and he could see accurate pressure readings again. Now David feels more confident driving his EV, knowing he will get an early warning if a tire starts losing air.

Micro Comparison

Unlike universal TPMS sensors that require programming with a special tool before they can be used, these sensors come pre-programmed for your specific vehicle. This saves you a step and reduces the chance of compatibility issues. While some aftermarket sensors may have shorter battery life, these are built to last about 3 years, matching the lifespan of many original equipment sensors.

Specifications

Operating Frequency: 433MHz

Battery Life: About 3 years

Replace For Part Numbers: 407003VU0A, 407003VU0B, 407004CB0A, 407004CB0B, 407004CB1A, 407004CB1B, 407005663R, 407006UA0A, 4250G122, A4204012400

Package Includes

- 4 x TPMS Sensors

Why You Will Love It

You get a complete set of four pre-programmed sensors that are ready to install without the extra step of programming. This saves you time and gives you the confidence that all your tires are being monitored consistently. With a battery life of about 3 years and compatibility with many popular vehicle models, this is a practical and cost-effective way to keep your TPMS system working properly.

Questions and Answers

Question: Do these sensors come already programmed for my car?

Answer: Yes, these sensors are pre-programmed for your specific vehicle make and model, so no programming is needed before installation.

Question: Do I need any special tools to install these sensors?

Answer: You will need a scan tool or a relearn procedure to activate the sensors after installation. This is typically done by a trained professional.

Question: How long do the batteries in these sensors last?

Answer: The battery life is about 3 years under normal driving conditions.

Question: Will these sensors work on my Nissan Qashqai?

Answer: Yes, these sensors are compatible with the Nissan Qashqai from 2016-10 to 2020-09.

Question: Are these sensors a direct replacement for the original ones?

Answer: Yes, they are designed as a direct replacement and are compatible with the listed OEM part numbers.

Keep your tires at the right pressure with this set of four 433MHz TPMS sensors. Designed for a wide range of DFSK, Fencon, AITO, and SERES vehicles, these sensors help you monitor tire pressure in real time. The set comes pre-programmed for your specific vehicle model, so no sensor programming is needed on your end.

Each sensor uses a PCBA board and battery to deliver accurate readings directly to your dashboard. The 3641050-FS01 model is a direct replacement for your original equipment, offering a simple way to restore or upgrade your tire pressure monitoring system.

Installation is straightforward for a trained professional. After installation, the sensors need to be activated using a scan tool or through a relearn procedure with an OBDII tool. This ensures the sensors sync correctly with your vehicle's system.

Driving with properly inflated tires improves fuel efficiency, extends tire life, and enhances overall road safety. These TPMS sensors provide the peace of mind that comes with knowing your tire pressure is always within the recommended range.

Key Features and Benefits

- 433MHz frequency that provides reliable tire pressure data to your vehicle's monitoring system

• Pre-programmed for your make, model, and year so you can install without complex programming steps

• PCBA board and battery construction that delivers durable performance inside the tire environment

• OEM number 3641050-FS01 matching your original part for a direct fit replacement

• OBDII relearn compatibility that makes activation simple with the right scan tool

Who Is This For

- Drivers of DFSK Landian E3 (2023-2025), E5 (2023-2025), or Fencon models needing a TPMS replacement

• AITO M5, M7, and M9 owners looking for a direct-fit sensor set without programming hassle

• SERES SF5 owners who want to restore their factory tire pressure monitoring functionality

• Vehicle owners who prefer to have a professional install pre-programmed sensors for reliable results

Usage Scenario

Carlos noticed the tire pressure warning light on his AITO M5 dashboard flickering on and off. After checking his tires manually, he found one rear tire was consistently low. Rather than ignoring the warning, he ordered this set of four TPMS sensors. A local tire shop installed them in under an hour and used an OBDII tool to complete the relearn process. Now his dashboard shows accurate pressure readings for all four tires, and he no longer worries about underinflated tires affecting his daily commute.

Micro Comparison

Unlike universal TPMS sensors that require manual programming for each vehicle, these sensors come pre-programmed for your specific make, model, and year. This saves you time and reduces the risk of setup errors. The set includes four sensors, giving you a complete replacement for all wheels in one package.

Specifications

Material: PCBA board and battery

Model Number: 3641050-FS01

OEM NO.: 3641050-FS01

Request matching tool: OBD

Package Includes

- 4 x TPMS Tire Pressure Monitoring Sensors

Why You Will Love It

No complicated programming means less time spent figuring out installation and more time driving safely. These sensors restore your vehicle's ability to monitor tire pressure automatically. You get the confidence of knowing your tires are properly inflated every time you get behind the wheel.

Questions and Answers

Question: Do I need to program these sensors before installing them?

Answer: No, these sensors are pre-programmed for your specific vehicle make, model, and year. You only need to activate them using a scan tool or OBDII relearn procedure after installation.

Question: Which vehicles are these TPMS sensors compatible with?

Answer: They are compatible with DFSK Landian E3, E5, Fencon 500, 580, S560, ix5, ix7, AITO M5, M7, M9, and SERES SF5 models within specific production years. Please check the full list to confirm your vehicle.

Question: What is the frequency of these sensors?

Answer: These sensors operate at 433MHz, which is the standard frequency used by most modern vehicles for tire pressure monitoring.

Question: Can I install these sensors myself?

Answer: Installation of TPMS sensors is recommended to be performed only by trained professionals. The sensors need to be mounted inside the tire and activated with an OBDII tool.

Question: How do I activate the sensors after installation?

Answer: You need to use a scan tool or perform a relearn procedure using an OBDII tool. This syncs the sensors with your vehicle's monitoring system.

Question: What should I check before ordering?

Answer: Confirm that the OE number (part number 3641050-FS01) matches your original sensor. Also verify that your vehicle make, model, and production year are listed in the compatibility table.

Question: Will these sensors work if my vehicle is not listed in the description?

Answer: We recommend contacting us before ordering if your vehicle is not listed. Ordering the wrong part may not be refundable, so it is important to confirm compatibility first.

Keep your tire pressure in check with this set of four 433MHz TPMS sensors designed for select Chrysler and Dodge models. These direct-fit replacements help you monitor tire pressure in real time, reducing the risk of blowouts and improving fuel efficiency. Pre-programmed for your vehicle's make and model, they install easily and start working right away.

Your vehicle's tire pressure monitoring system is a crucial safety feature. When a sensor fails, you lose the ability to see real-time pressure data on your dashboard. This set of four sensors restores that function, giving you peace of mind on every drive. They operate at 433MHz and come pre-programmed to match your vehicle's system, so you can get back on the road with minimal hassle.

Each sensor is built to withstand the harsh conditions inside your tire, including extreme temperatures and constant vibration. The battery is rated to last about three years under normal use, so you can install them and forget about them until it is time for a replacement. The set includes four sensors, enough to cover all wheels on most passenger cars and SUVs.

Installation is straightforward. Simply remove the old sensor, install the new one, and use a compatible scan tool or follow a relearn procedure to sync the sensor with your vehicle's TPMS module. No programming is required before installation, as these sensors are already set for your specific application.

Key Features and Benefits

- 433MHz operating frequency that works with your vehicle's existing TPMS system for accurate pressure readings

• Pre-programmed for your specific make, model, and year so you do not need to program them before installation

• Long battery life of about three years under normal use, reducing the frequency of replacements

• Direct-fit replacement for multiple Chrysler and Dodge models, offering broad vehicle compatibility

• Includes all four sensors in one package, providing a complete set for your vehicle

Who Is This For

- Owners of 2012-2013 Chrysler 200, 2008 Chrysler 300, or 2008-2009 Chrysler Sebring needing a TPMS sensor replacement

• Drivers of 2012-2013 Dodge Avenger, 2011-2012 Dodge Caliber, or 2008 Dodge Charger with a failed tire pressure sensor

• Anyone looking to replace all four TPMS sensors at once to ensure consistent monitoring across all tires

• DIY mechanics who prefer a pre-programmed sensor that does not require complex setup before installation

Usage Scenario

Mark noticed the tire pressure warning light on his 2012 Dodge Avenger had been on for weeks. After checking the tires and finding no leaks, he realized one of the TPMS sensors had stopped working. He ordered this four-sensor set, swapped out the old sensors in his driveway, and used a scan tool to sync the new ones. Within an hour, the warning light was off, and he could see accurate pressure readings on his dashboard again.

Micro Comparison

Some aftermarket TPMS sensors require programming before installation, which can be time-consuming and may require special equipment. This set arrives pre-programmed for your specific vehicle, so you can install them immediately. The 433MHz frequency matches the factory specification for many Chrysler and Dodge models, ensuring reliable communication with your vehicle's TPMS module.

Specifications

Interchange Part Numbers: 56053031AD, 68078768AA, 68001698AB, 68001698AA, 56053031AC, 68001698AC, 56053031AB

Frequency: 433MHz

Battery Life: About 3 years

Package Includes

- 4 x TPMS sensors

Why You Will Love It

You will appreciate the peace of mind that comes from knowing your tire pressure is being monitored accurately. The pre-programmed design saves you time and effort during installation. With a battery life of about three years, you can install these sensors and not worry about them for a long time.

Questions and Answers

Question: What frequency do these TPMS sensors use?

Answer: They operate at 433MHz.

Question: Do I need to program these sensors before installing them?

Answer: No, they come pre-programmed for your specific vehicle make, model, and year. You only need to activate them using a scan tool or perform a relearn procedure after installation.

Question: How long does the battery last in these sensors?

Answer: The battery is rated to last about three years under normal use.

Question: What is the relearn procedure for these sensors?

Answer: You can use a compatible scan tool to sync the sensors with your vehicle's TPMS module after installation.

Question: Will these sensors work on my 2008 Dodge Charger?

Answer: Yes, they are compatible with the 2008 Dodge Charger.

Question: Can I install these sensors myself?

Answer: Yes, installation involves removing the old sensor and installing the new one. You may need a tire machine to mount and balance the tire afterward.

Question: Do these sensors come with any mounting hardware?

Answer: The package includes four sensors. You may need to reuse the original mounting hardware from your vehicle.

Replace your worn or failing tire pressure sensors with this set of four 433MHz TPMS sensors. These sensors are designed to fit a wide range of BMW, Mercedes-Benz, and other compatible models, offering a reliable replacement for your vehicle's original equipment.

These sensors come pre-programmed for your specific vehicle, so no complex programming is needed before installation. They are built using a durable PCBA board and battery, ensuring stable and sensitive performance to keep you informed of your tire pressure at all times.

Each sensor is designed as a perfect aftermarket replacement, providing a cost-effective solution without compromising on quality. The set includes four sensors, making it easy to replace all units on your vehicle at once for consistent monitoring.

Installation is straightforward for a trained professional, and the sensors can be activated using a scan tool or by performing a "re-learning" procedure with an OBDII tool. This allows your vehicle's system to recognize and communicate with the new sensors quickly.

Key Features and Benefits

- 433MHz frequency that ensures a stable and reliable wireless connection to your vehicle's monitoring system.

• Pre-programmed for specific BMW and Mercedes models, which eliminates the need for manual sensor programming and saves you time.

• Durable PCBA board and battery construction that provides long-lasting and sensitive performance.

• Set of four sensors that allows for a complete system replacement, ensuring all tires are monitored consistently.

• Simplified relearn process with an OBDII tool, making activation quick and easy for professionals.

Who Is This For

- BMW owners with models like the 3 Series G20, 5 Series G30, X3 G01, or X5 G05 who need a direct replacement for their original TPMS sensors.

• Mercedes-Benz drivers of models such as the A-Class W177, E-Class W213, or GLE V167 looking for a reliable aftermarket sensor option.

• Car enthusiasts who own a Toyota Supra or a Rolls-Royce model and require a compatible 433MHz sensor.

• Drivers who prefer to replace all four sensors at once for a consistent and reliable tire pressure monitoring experience.

Usage Scenario

Mark noticed his BMW 5 Series dashboard showing a persistent tire pressure warning light. After a quick check, he found his original sensors were failing. He ordered this set of four GANGLE sensors. After a short visit to his mechanic, the sensors were installed and activated using an OBDII tool. The warning light disappeared, and Mark now drives with confidence, knowing his tire pressure is being accurately monitored on every trip.

Micro Comparison

Unlike generic sensors that may require complex programming, this set comes pre-configured for a wide range of BMW and Mercedes models. This reduces installation time and potential errors. While original equipment sensors can be expensive, this aftermarket set offers a durable and reliable alternative at a more accessible price point, using high-quality components for stable performance.

Specifications

Material: PCBA board and battery

Model Number: 36106872774

OEM Numbers: 6872774, 6887140

Frequency: 433MHz

Quantity: 4 pieces per set

Package Includes

- 4 x Tire Pressure Sensors

Why You Will Love It

You will appreciate the peace of mind that comes from having a fully functional TPMS system. These sensors provide accurate, real-time data to your dashboard, helping you maintain optimal tire pressure for safety and fuel efficiency. The easy installation and pre-programmed design make this a hassle-free upgrade for your vehicle.

Questions and Answers

Question: Do I need to program these sensors before installation?

Answer: No, these sensors come pre-programmed for specific vehicle models. You just need to activate them with a scan tool or perform a relearn procedure.

Question: What is the frequency of these sensors?

Answer: They operate on a standard 433MHz frequency, which is compatible with most vehicle TPMS systems.

Question: How do I activate the sensors after installation?

Answer: You can activate them using a TPMS scan tool or by performing a "re-learning" procedure with an OBDII tool.

Question: Will these sensors fit my 2020 BMW X5?

Answer: Yes, they are compatible with the BMW X5 G05 model from 2018-10 to 2026-10. Please confirm your OEM part number to ensure a perfect match.

Question: Does the set include all four sensors?

Answer: Yes, the package includes four sensors, enough to replace all units on your vehicle.

Question: Are these sensors a direct replacement for the original ones?

Answer: Yes, they are designed as a direct aftermarket replacement. Just verify your vehicle's OEM part number before purchasing.

Replace your faulty or dead Ford TPMS sensors with this set of 4 pre-programmed 433MHz sensors. They are designed to fit a wide range of Ford models including the Ecosport, Edge, Explorer, Fiesta, Focus, Ranger, and S-Max. These sensors come ready to install, saving you the time and cost of programming.

These direct-fit sensors are built to restore your vehicle's tire pressure monitoring system to full functionality. They use a standard 433MHz frequency and are compatible with specific OEM part numbers, ensuring a seamless integration with your Ford's onboard computer.

Each sensor is a 100% new unit that comes pre-programmed for your specific vehicle make, model, and year. This eliminates the need for complex programming equipment at the installation stage. Simply activate them using an EL-50449 scan tool after installation to complete the relearn process.

The sensors are constructed with a PCBA board and battery, designed for long-lasting and reliable performance. They provide real-time tire pressure data to your dashboard, helping you maintain optimal tire inflation for improved safety, fuel efficiency, and tire lifespan.

Key Features and Benefits

- Pre-programmed for specific Ford models that saves you time and money on professional programming fees.

• 433MHz frequency ensures compatibility with your vehicle's existing TPMS system for a reliable connection.

• Direct-fit replacement that installs easily, restoring your tire pressure monitoring function quickly.

• 100% new unit provides dependable performance and accuracy, helping you avoid dangerous low-tire situations.

• Simplified relearn process using an EL-50449 tool makes the final setup straightforward for trained professionals.

Who Is This For

- Ford owners who need to replace a faulty or dead TPMS sensor in their vehicle.

• Car owners looking for a cost-effective, pre-programmed sensor alternative to expensive dealer parts.

• DIY mechanics and professional installers who want a quick and reliable replacement solution.

• Drivers who want to restore their tire pressure monitoring system to ensure safe driving conditions.

Usage Scenario

Mark noticed the TPMS warning light on his 2019 Ford Focus was constantly on. After checking his tire pressures manually, he confirmed they were correct, so he knew a sensor had failed. Instead of a costly trip to the dealership, he ordered this set of four pre-programmed sensors. He took them to his local mechanic, who installed them in under an hour. After a quick activation with an EL-50449 scan tool, the warning light turned off, and Mark could finally see his tire pressures on the dashboard again, giving him peace of mind on his daily commute.

Micro Comparison

Unlike universal sensors that require complex programming and special tools to clone, these sensors come pre-programmed for your specific Ford model. This direct-fit design simplifies the installation process and reduces the risk of compatibility issues, making them a more reliable and user-friendly choice compared to generic alternatives.

Specifications

- Material: PCBA board and battery

• Frequency: 433MHz

• Compatible OEM Part Numbers: F2GT-1A150-CB, F2GT-1A180-CB, F2GT-1A180-CC, F2GT-1A180-CD, F2GT-1A180-CE

• Product Condition: 100% New

• Programming: Pre-programmed for specific make/model/year

• Activation Tool Required: EL-50449 scan tool

Package Includes

- 4 x TPMS Tire Pressure Sensors

Why You Will Love It

You will love the convenience of a sensor that is ready to install right out of the box. No need for expensive dealer programming or complicated setup. This set gives you a direct, reliable, and cost-effective way to get your TPMS system back to working order, keeping you and your family safe on the road.

Questions and Answers

Question: Are these sensors already programmed for my car?

Answer: Yes, these sensors come pre-programmed for your specific Ford make, model, and year. You do not need to program them before installation.

Question: Do I need a special tool to activate these sensors?

Answer: Yes, you will need an EL-50449 scan tool to activate the sensors and complete the relearn process after installation.

Question: Can a regular mechanic install these sensors?

Answer: Yes, installation is recommended to be performed by a trained professional, such as a mechanic or tire shop.

Question: How do I know if these sensors fit my Ford vehicle?

Answer: Please confirm your vehicle's part number against the compatible OEM numbers listed: F2GT-1A150-CB, F2GT-1A180-CB, F2GT-1A180-CC, F2GT-1A180-CD, or F2GT-1A180-CE.

Question: What is the frequency of these sensors?

Answer: These sensors operate on a standard 433MHz frequency, which is compatible with most Ford TPMS systems.

This set of four 433MHz TPMS tire pressure sensors is designed as a direct replacement for a wide range of popular vehicles, including models from Great Wall, HAVAL, BYD, Geely, and WEY. Each sensor comes pre-programmed, so you can install them without the need for complex coding, making your tire pressure monitoring system functional again quickly.

These sensors are built to be durable and stable, providing accurate tire pressure readings to help you maintain safer driving conditions. The 100% brand-new PCBA board and battery ensure reliable performance, giving you peace of mind on the road.

Installing these sensors is a straightforward process. They are designed to be activated using a TPMS scan tool or a vehicle re-learn procedure, which typically requires an OBDII tool. For best results, professional installation is recommended to ensure everything is set up correctly.

By replacing faulty or missing sensors, you restore a critical safety feature in your vehicle. Keeping your tires at the correct pressure improves fuel efficiency, extends tire life, and enhances overall vehicle handling.

Key Features and Benefits

- Pre-programmed for specific vehicle models that simplifies installation and eliminates the need for sensor programming

• 433MHz frequency that ensures reliable communication with your vehicle's TPMS system for accurate pressure monitoring

• 100% brand new PCBA board and battery that provides long-lasting and stable performance

• Direct OEM replacement design that fits multiple vehicle models for a versatile and convenient solution

Who Is This For

- Owners of compatible Great Wall, HAVAL, BYD, Geely, or WEY vehicles needing to replace faulty or dead TPMS sensors

• Drivers who want to restore their tire pressure monitoring system for improved safety and fuel economy

• Vehicle owners looking for a pre-programmed sensor option to avoid the hassle of complex setup

Usage Scenario

Mark noticed his HAVAL H6's tire pressure warning light stayed on even after inflating his tires. A quick check at the shop confirmed one of the sensors had failed. He ordered this set of four pre-programmed sensors, and after a short installation at his local mechanic, the warning light was gone. Now he drives with confidence, knowing his TPMS is working correctly again.

Micro Comparison

Unlike universal sensors that require a separate programming step, these sensors come pre-programmed for your specific vehicle model. This saves you time and reduces the chance of compatibility issues. While other options might need a professional to code them, this set is designed for a more direct replacement process.

Specifications

Material: PCBA board and battery

Model Numbers: 01732445, 3641100XKR02A, SC-3609200H

OEM Number: 3641100XKR02A

Frequency: 433MHz

Quantity: 4 pieces per set

Package Includes

- 4 x TPMS Tire Pressure Sensors

Why You Will Love It

You will appreciate the straightforward installation and the peace of mind that comes with a fully functional tire pressure monitoring system. This set offers a practical and reliable way to maintain your vehicle's safety without unnecessary complexity.

Questions and Answers

Question: Do I need to program these sensors before installation?

Answer: No, these sensors come pre-programmed for specific vehicle models. You just need to activate them using a TPMS scan tool or a vehicle re-learn procedure.

Question: What vehicles are these sensors compatible with?

Answer: They are compatible with a range of models including Great Wall Hover H6, BYD Dolphin, HAVAL H9, HAVAL H6, HAVAL F7, HAVAL F7X, WEY Mocha, WEY VV6, and several Geely models. Please check the full list to confirm your vehicle.

Question: How do I activate the sensors after installation?

Answer: After installation, you will need to use a TPMS scan tool or an OBDII tool to perform a re-learn procedure to activate the sensors with your vehicle's system.

Question: Can I install these sensors myself?

Answer: While it is possible, installation of TPMS sensors is recommended to be performed by trained professionals to ensure correct mounting and sealing.

Question: What should I do before ordering to make sure these fit?

Answer: Please confirm the OE number (part number) on your original sensor matches one of the listed numbers: 01732445, 3641100XKR02A, or SC-3609200H. If you are unsure, contact us before placing your order.

Keep your Jeep’s tire pressure monitoring system working correctly with this set of four 433MHz TPMS sensors. Designed as a direct replacement for select Jeep Compass, Grand Cherokee, and Patriot models, these sensors come pre-programmed for your specific vehicle, so no sensor programming is needed. Simply install them and use a scan tool or OBDII relearn procedure to activate the system.

Each sensor is built with a PCBA board and battery for reliable, long-term performance. The package includes four sensors, one for each tire, to ensure your entire TPMS system is updated at once. This helps maintain accurate tire pressure readings, which supports better fuel efficiency, safer handling, and longer tire life.

Installation is recommended to be performed by a trained professional. The sensors are 100% new and require a simple re-learning process with an OBDII tool after installation. If you are unsure about compatibility, check your vehicle’s part number against the OEM number 56029481AB before purchasing.

Key Features and Benefits

- Pre-programmed for specific Jeep models that simplifies installation and eliminates the need for sensor programming

• 433MHz frequency that ensures reliable communication between the sensor and your vehicle’s TPMS system

• 100% new PCBA board and battery that provides dependable performance and long service life

• Direct replacement design that fits your vehicle without modifications or adapters

• Four-sensor set that allows you to replace all tire sensors at once for consistent readings

Who Is This For

- Owners of Jeep Compass (2006-2017), Grand Cherokee (2004-2010), or Patriot (2014-2017) needing TPMS replacement

• Drivers who want to restore their tire pressure monitoring system after sensor battery failure or damage

• Vehicle owners preparing for a tire change or rotation who want to update sensors at the same time

• DIY enthusiasts or professional mechanics looking for a pre-programmed, plug-and-play TPMS solution

Usage Scenario

Mark noticed his Jeep Compass’s tire pressure warning light stayed on even after inflating all four tires. A quick check revealed the original TPMS sensors had finally worn out after years of use. He ordered this four-sensor set, had a local shop install them, and used an OBDII scanner to complete the relearn process. Within minutes, the warning light turned off, and he could see accurate tire pressures on his dashboard again. Now he drives with confidence, knowing his TPMS is working properly.

Micro Comparison

Unlike universal TPMS sensors that require programming or cloning, these sensors come pre-programmed for your specific Jeep model. This saves you time and the cost of a programming tool. They also arrive as a complete four-pack, so you don’t have to buy sensors individually or worry about mixing different brands. For Jeep owners looking for a straightforward, direct-fit replacement, this set offers a hassle-free solution.

Specifications

- Material: PCBA board and battery

• Model Number: 56029481AB

• OEM Number: 56029481AB

• Frequency: 433MHz

• Compatibility: For Jeep Compass (2006-09 to 2017-09), Jeep Grand Cherokee (2004-07 to 2010-04), Jeep Patriot (2014-01 to 2017-11)

Package Includes

- 4 x TPMS Tire Pressure Sensors

Why You Will Love It

Restoring your Jeep’s TPMS with these pre-programmed sensors means no complicated setup and no extra programming costs. You get peace of mind knowing your tire pressure is monitored accurately, which helps keep you safer on the road. Plus, replacing all four sensors at once saves you from dealing with another failure down the line.

Questions and Answers

Question: Do these sensors need programming before installation?

Answer: No, they come pre-programmed for your specific Jeep model. You only need to activate them with a scan tool or OBDII relearn process after installation.

Question: Will these fit my 2010 Jeep Grand Cherokee?

Answer: Yes, they are designed for Jeep Grand Cherokee models from 2004-07 to 2010-04. Please confirm your vehicle’s part number matches 56029481AB before purchasing.

Question: Can I install these sensors myself?

Answer: Installation is recommended to be performed by trained professionals. The sensors need to be mounted inside the tire and then activated using an OBDII tool.

Question: What is the frequency of these sensors?

Answer: They operate at 433MHz, which is the standard frequency for many Jeep TPMS systems.

Question: How many sensors are included in the package?

Answer: The package includes four sensors, one for each tire on your vehicle.

Keep your Mercedes-Benz driving with accurate, real-time tire pressure monitoring. This set of four 433MHz TPMS sensors is a direct replacement for a wide range of Mercedes models, including the C-Class, E-Class, S-Class, GLA, GLC, and many more. They come pre-programmed for your vehicle, so you can install them without any sensor programming.

These sensors are built to be a reliable and durable aftermarket solution. They are designed to be stable and sensitive, giving you the confidence that your tire pressure is always being monitored correctly. Each sensor is 100% brand new and ready to be activated with a simple "re-learning" process using an OBDII scan tool.

Replacing faulty or dead TPMS sensors is essential for safety and fuel efficiency. This kit provides everything you need to get your system back online, helping you avoid uneven tire wear and potential blowouts. With a simple installation recommended for professionals, you can restore your vehicle's monitoring system quickly.

Key Features and Benefits

- Pre-programmed for specific Mercedes models that eliminates the need for complex sensor programming.

• 433MHz frequency that ensures compatibility with your vehicle's existing monitoring system.

• 100% brand new and high-quality construction that provides a stable and sensitive performance.

• Direct replacement design that makes installation straightforward for trained professionals.

• Simplified relearn process using an OBDII scan tool that gets your system active quickly.

Who Is This For

- Mercedes-Benz owners who need to replace a faulty or dead tire pressure sensor.

• Drivers looking for a cost-effective aftermarket alternative to expensive dealership sensors.

• Mechanics and auto repair shops servicing a wide range of Mercedes-Benz models.

• Car enthusiasts who want to maintain their vehicle's safety and performance features.

Usage Scenario

Mark's 2015 Mercedes C-Class (W205) had been showing a persistent tire pressure warning light on his dashboard for weeks. He had checked the tire pressures manually, but the light would not go away. After a quick scan, his mechanic confirmed that one of the original TPMS sensors had failed. Instead of paying a premium at the dealership, Mark ordered this set of four pre-programmed sensors. His mechanic installed them and performed a simple relearn procedure using an OBDII tool. The warning light turned off immediately, and Mark could finally drive with peace of mind.

Micro Comparison

While other sensors may require complex programming or have a limited vehicle fitment, this kit is pre-programmed for a broad range of Mercedes models, making it a more convenient and versatile choice. It offers a high-quality aftermarket solution that matches the performance of original parts without the high price tag.

Specifications

Material: Imported material

Model Number: A0009054100, A0009057200, A0025409017, A0025409617Q05, A0035400217

OEM NO.: A0009050030

Frequency: 433MHz

Package Includes

- 4 x TPMS Tire Pressure Sensor

Why You Will Love It

You will love the peace of mind that comes from knowing your tire pressure is being accurately monitored. This set saves you time and money by offering a direct replacement that is easy for a professional to install. It is a simple, reliable upgrade that keeps your Mercedes running at its best.

Questions and Answers

Question: Do these sensors come pre-programmed for my car?

Answer: Yes, these sensors are pre-programmed for the specific Mercedes-Benz models listed in the fitment guide.

Question: Do I need any special tools to install these sensors?

Answer: Yes, an OBDII scan tool is required to perform the "re-learning" process after installation. Installation is recommended to be done by a trained professional.

Question: What is the frequency of these sensors?

Answer: The operating frequency is 433MHz.

Question: Will these sensors work on my 2014 Mercedes E-Class?

Answer: Yes, these sensors are compatible with the Mercedes-Benz E-Class [W212] from 2014-12 to 2016-01.

Question: How do I confirm these are the right sensors for my vehicle?

Answer: Please confirm the OE number (part number) from your original sensor before purchasing. The compatible model numbers are A0009054100, A0009057200, A0025409017, A0025409617Q05, and A0035400217.

Maintain proper tire pressure and drive with confidence using this 4-pack of 433MHz TPMS tire pressure sensors. Designed as a direct replacement for the OEM part number A0025408017, these sensors are pre-programmed for specific Mercedes-Benz models, so no sensor programming is required. Simply install them, perform a quick relearn with an OBDII scan tool, and your vehicle's tire pressure monitoring system will be back to full functionality.

Each sensor is built with a PCBA board and battery for reliable, long-lasting performance. The set includes four sensors to replace all tires at once, ensuring consistent monitoring across your vehicle. Whether you are replacing a failed sensor or upgrading an older system, this TPMS kit offers a straightforward solution for maintaining safety on the road.

Installation is recommended to be performed by a trained professional to ensure proper fitment and activation. With the correct part number match and a simple relearn process, you can restore your vehicle's tire pressure alerts without unnecessary hassle.

Key Features and Benefits

- Pre-programmed for specific Mercedes-Benz models that eliminates the need for sensor programming and simplifies installation

• 433MHz frequency that ensures compatibility with your vehicle's existing TPMS system

• PCBA board and battery construction that delivers reliable performance and long sensor life

• Direct replacement for OEM part number A0025408017 that guarantees a proper fit

• 4-pack set that allows you to replace all sensors at once for consistent monitoring

Who Is This For

- Mercedes-Benz owners with models CLS C219, E-Class W211, GL-Class X164, ML-Class W164, R-Class V251, S-Class W221, or SL R230

• Drivers experiencing TPMS warning lights who need a direct replacement sensor

• Vehicle owners looking for a pre-programmed sensor to avoid complex setup

• Anyone performing routine tire pressure sensor maintenance or replacement

Usage Scenario

Mark noticed his Mercedes-Benz E-Class W211 dashboard showing a persistent tire pressure warning light. After checking the tire pressures and finding them normal, he knew a sensor had failed. He ordered this 4-pack of pre-programmed TPMS sensors, took his car to a local shop, and had all four sensors installed in under an hour. The technician used an OBDII scan tool to complete the relearn process, and the warning light disappeared. Now Mark drives with confidence knowing his TPMS system is fully operational.

Micro Comparison

Unlike universal TPMS sensors that require complex programming and may not fit properly, these sensors are pre-programmed specifically for your Mercedes-Benz model and match the OEM part number A0025408017. This direct-fit design saves you time and reduces the risk of compatibility issues. While some aftermarket sensors require additional programming tools, this set is ready to install with a simple OBDII relearn procedure.

Specifications

- Material: PCBA board and battery

• Model Number: A0025408017

• OEM Number: A0025408017

• Frequency: 433MHz

• Quantity: 4 sensors

Package Includes

- 4 x TPMS tire pressure sensors

Why You Will Love It

You will love how easy it is to restore your Mercedes-Benz TPMS system with these pre-programmed sensors. No complicated setup or extra programming steps means less time in the shop and more time on the road. With a direct OEM fit and reliable 433MHz performance, you get peace of mind knowing your tire pressure is always monitored correctly.

Questions and Answers

Question: Do I need to program these sensors before installation?

Answer: No, these sensors are pre-programmed for specific Mercedes-Benz models and do not require sensor programming. You only need to activate them with a scan tool or perform a relearn procedure.

Question: What vehicles are compatible with this TPMS sensor?

Answer: These sensors fit Mercedes-Benz CLS C219 (2005-2010), E-Class W211 (2005-2011), GL-Class X164 (2006-2009), ML-Class W164 (2004-2011), R-Class V251 (2005-2009), S-Class W221 (2005-2009), and SL R230 (2005-2011).

Question: How do I complete the installation?

Answer: After installing the sensors, you need to use an OBDII scan tool to perform a relearn procedure. Installation is recommended to be done by a trained professional.

Question: Will these sensors work if my old sensor has a different part number?

Answer: You should confirm the part number before purchase. Check if your old sensor matches A0025408017. If you are not sure, contact us before ordering.

Question: How many sensors come in this package?

Answer: This package includes 4 sensors, enough to replace all tires on your vehicle at once.

Keep your tire pressure monitoring system working reliably with this set of 4 pre-programmed 433MHz TPMS sensors. Designed to fit a wide range of Opel, Vauxhall, Cadillac, and other compatible models, these sensors help you maintain proper tire pressure for safer driving and better fuel efficiency. Each sensor is a direct replacement for multiple OEM part numbers, making installation straightforward.

These tire pressure sensors come pre-programmed for your specific vehicle make and model. They use the standard 433MHz frequency and are designed to match the original factory specifications. The sensors require activation using an EL-50448 scan tool after installation, and a simplified relearn procedure is needed to sync them with your vehicle's TPMS system.

Made from quality electronic materials, each sensor is built to withstand the demands of daily driving. The set includes four sensors to replace all tire positions at once, ensuring consistent and accurate pressure readings across your vehicle. Professional installation is recommended to guarantee proper function and sealing.

Before purchasing, verify that the part number on your existing sensor matches one of the compatible numbers listed. This simple check ensures the new sensors will work correctly with your vehicle's TPMS system. If you are unsure about compatibility, contact us before ordering to avoid any issues.

Key Features and Benefits

- Pre-programmed for specific vehicle models that saves you time and eliminates the need for complex programming

• 433MHz frequency that matches original equipment specifications for reliable communication with your car's TPMS system

• Compatible with multiple OEM part numbers including 13512347, 13598773, 13540606, 13597645, 39186445, 13516165 that covers a wide range of vehicle applications

• Set of 4 sensors that allows you to replace all tire positions at once for consistent monitoring

• No sensor programming required that simplifies the installation process for trained professionals

Who Is This For

- Owners of compatible Opel Astra K, Insignia B, or Vauxhall Astra and Insignia models needing TPMS sensor replacement

• Drivers of Cadillac CT4, CT6, XT4, XT5, or XT6 vehicles looking for a direct fit TPMS sensor option

• Mechanics and auto technicians performing TPMS service on Chevrolet Equinox, Traverse, or other compatible GM vehicles

• Vehicle owners with a TPMS warning light on who want to restore proper tire pressure monitoring functionality

Usage Scenario

Mark noticed his Opel Insignia's TPMS warning light had been on for weeks. After checking his tire pressures manually, he decided it was time to replace the aging sensors. He ordered this 4-pack, verified the part numbers matched his old sensors, and had his mechanic install them. The mechanic activated the sensors with an EL-50448 scan tool, performed the relearn procedure, and within minutes the warning light was gone. Now Mark gets accurate tire pressure readings again without having to check manually every time he drives.

Micro Comparison

Unlike generic universal TPMS sensors that require complex programming and may not work reliably with your vehicle's system, these sensors come pre-programmed for specific Opel, Vauxhall, and Cadillac models. They match OEM specifications and support multiple factory part numbers, giving you a direct replacement option that simplifies the installation process. The set of four ensures all sensors are replaced at once, preventing future mismatched readings.

Specifications

Material: Electronic material

Model Number: 13512347, 13598773

OEM Numbers: 13512347, 13598773, 13540606, 13597645, 39186445, 13516165

Frequency: 433MHz

Quantity: 4 sensors per set

Package Includes

- 4 x TPMS tire pressure sensors

Why You Will Love It

No need to worry about complex programming or visiting a dealership for sensor setup. These pre-programmed sensors let you restore your TPMS system with a straightforward installation. Drive with confidence knowing your tire pressures are being monitored accurately, which helps improve safety and fuel economy.

Questions and Answers

Question: Do these sensors come already programmed for my car?

Answer: Yes, these sensors are pre-programmed specifically for the compatible makes and models listed. You do not need to program them yourself.

Question: What tool do I need to activate these sensors after installation?

Answer: You will need an EL-50448 scan tool to activate the sensors and perform the simplified relearn procedure.

Question: Will these sensors work on my 2020 Cadillac XT5?

Answer: Yes, these sensors are compatible with Cadillac XT5 models from 2016 to 2021. Please confirm your existing sensor part number matches one of the listed OEM numbers before ordering.

Question: Can I install these sensors myself?

Answer: Installation of TPMS sensors is recommended to be performed only by trained professionals to ensure proper sealing and function.

Question: How do I know if these sensors are the right fit for my vehicle?

Answer: Check the part number on your current TPMS sensor and compare it to the OEM numbers listed: 13512347, 13598773, 13540606, 13597645, 39186445, 13516165. If you are unsure, contact us before ordering.

Keep your Renault driving safe with a direct replacement tire pressure monitoring sensor. This 433MHz TPMS sensor is designed for several popular Renault models including the Megane, Scenic, Zoe, Fluence, and Laguna. It comes pre-programmed to match your vehicle's system, so you can install it without complex setup.

Maintaining correct tire pressure is essential for fuel efficiency, tire life, and overall safety. A faulty sensor can leave you without critical pressure warnings. This set of four sensors restores that protection and helps you drive with confidence.

Each sensor is built to meet OEM specifications and uses the standard 433MHz frequency found in many Renault vehicles. The sensors are 100% new and ready to sync with your car's TPMS system using an OBDII tool for a simplified relearn process. Professional installation is recommended to ensure proper function and sealing.

Before purchasing, confirm your vehicle's OE part number to guarantee compatibility. This set replaces part numbers 407000435R and 407003743R, fitting a wide range of Renault models from the late 2000s through the late 2010s.

Key Features and Benefits

- Pre-programmed 433MHz sensors that are ready to install and require no complex sensor programming, saving you time and effort.

• Direct fit replacement for multiple Renault models including Megane, Scenic, Zoe, Fluence, and Laguna, ensuring broad vehicle compatibility.

• Simplified relearn process using an OBDII tool that makes activation straightforward for trained professionals.

• 100% new sensors that restore your tire pressure monitoring system to full function, helping you maintain safe tire pressure.

• Replaces OEM part numbers 407000435R and 407003743R for an accurate fit with your original equipment specifications.

Who Is This For

- Renault owners with a faulty TPMS sensor who need a direct replacement without visiting the dealership.

• DIY mechanics and professional technicians looking for a reliable, pre-programmed sensor for Renault models.

• Anyone driving a compatible Renault from the 2008-2019 model years who wants to restore their tire pressure monitoring system.

Usage Scenario

Marie noticed her Renault Megane's tire pressure warning light stayed on even after inflating her tires. A quick check at her local garage confirmed one of the sensors had failed. Instead of paying a premium for dealer parts, she ordered this set of four sensors. After having them installed by a professional and completing a quick OBDII relearn, the warning light turned off. Now she drives with peace of mind knowing her TPMS is working correctly again.

Micro Comparison

Unlike universal TPMS sensors that require complex programming and cloning, this set comes pre-programmed for your specific Renault model. It simplifies the installation process and reduces the chance of compatibility errors. While generic sensors may work, choosing a sensor matched to your OE part numbers offers a more straightforward and reliable replacement experience.

Specifications

Frequency: 433MHz

OEM Part Numbers: 407000435R, 407003743R

Condition: 100% New

Package Includes

- 4 x TPMS Tire Pressure Sensors

Why You Will Love It

Restoring your Renault's tire pressure monitoring system gives you one less thing to worry about on the road. These pre-programmed sensors take the guesswork out of replacement and help you maintain safe driving conditions. You will appreciate the straightforward installation and the confidence that comes with a functioning TPMS.

Questions and Answers

Question: Do these sensors come pre-programmed for my Renault?

Answer: Yes, these sensors are pre-programmed specifically for your Renault model. They do not require additional programming, but you will need an OBDII tool for the relearn process.

Question: How do I know if these sensors fit my vehicle?

Answer: Check your vehicle's OE part number before purchasing. This set replaces part numbers 407000435R and 407003743R and fits many Renault models including Megane, Scenic, Zoe, Fluence, and Laguna from the 2008-2019 model years.

Question: Can I install these sensors myself?

Answer: Installation of TPMS sensors is recommended to be performed only by trained professionals to ensure proper sealing and function. The relearn process requires an OBDII tool.

Question: What is the frequency of these sensors?

Answer: These sensors operate at 433MHz, which is the standard frequency used by many Renault vehicles.

Question: Are these sensors new or refurbished?

Answer: These sensors are 100% new. They are not refurbished or used.

Question: What do I do if the wrong sensor is shipped?

Answer: Please confirm your OE number before ordering. If you are unsure, contact us before placing your order to verify compatibility. We cannot refund for incorrect orders placed without confirmation.

Keep your Hyundai's tire pressure monitoring system working accurately with this set of four 433MHz TPMS sensors. Designed as a direct replacement for OEM part number 52933-C1100, these sensors help you maintain proper tire inflation for safer driving and better fuel economy.

Each sensor is built from durable rubber and plastic materials to withstand the harsh conditions inside your tire. The 433MHz operating frequency ensures reliable communication with your vehicle's onboard TPMS receiver, giving you real-time pressure and temperature data for each wheel.

These sensors come pre-programmed for specific Hyundai models, so you do not need to worry about complex programming steps. Simply install them in your tires and use a scan tool or follow the re-learning procedure to activate them. Professional installation is recommended to ensure proper seating and sealing.

With an expected battery life of about three years, this set provides long-term peace of mind. Replacing all four sensors at once ensures consistent performance and helps you avoid the hassle of dealing with individual sensor failures down the road.

Key Features and Benefits

- Pre-programmed for specific Hyundai models that simplifies installation and eliminates the need for manual programming

• 433MHz operating frequency that ensures stable and reliable communication with your vehicle's TPMS system

• Rubber and plastic construction that provides durability against road vibrations and temperature changes

• About three years of battery life that reduces the frequency of sensor replacements

• Direct replacement for OEM part number 52933-C1100 that guarantees a proper fit and compatibility

• Set of four sensors that allows you to replace all wheels at once for consistent monitoring

Who Is This For

- Hyundai owners with models like i20 GB (2014-2021), iX35 LM (2015-2017), NEXO FE (2018-2024), Santa Fe TM (2018-2024), Sonata LF (2014-2019), or Tucson TL (2015-2020) who need replacement TPMS sensors

• Drivers who want to restore their factory tire pressure monitoring functionality after sensor failure or battery depletion

• Vehicle owners preparing for tire replacement who prefer to install new sensors at the same time for convenience

• DIY enthusiasts and professional mechanics looking for a direct-fit TPMS solution without complicated programming requirements

Usage Scenario

Mark noticed his Hyundai Tucson's TPMS warning light staying on even after inflating his tires to the correct pressure. A quick check revealed that two of his original sensors had dead batteries. Instead of replacing just those two, he ordered this complete set of four 52933-C1100 sensors. During his next tire rotation, his mechanic installed all four new sensors and used a scan tool to activate them. The warning light turned off, and Mark now sees accurate pressure readings for every wheel on his dashboard display.

Micro Comparison

Unlike universal TPMS sensors that need manual programming for each vehicle, these sensors come pre-configured for specific Hyundai models. This saves you time and reduces the risk of compatibility issues. Compared to dealership replacement parts, this set offers a cost-effective alternative without sacrificing the direct-fit convenience and reliable 433MHz communication your vehicle expects.

Specifications

Material: Rubber and Plastic

Model Number: 52933-C1100

OEM Number: 52933-C1100

Operating Frequency: 433MHz

Battery Life: About 3 years

Quantity: 4 pieces

Package Includes

- 4 x Tire Pressure Monitor Sensor

Why You Will Love It

Driving with a glowing TPMS light is distracting and leaves you guessing about your tire health. This sensor set restores your factory monitoring system so you can focus on the road ahead. Knowing each tire's pressure at a glance gives you confidence during long trips and daily commutes alike.

Questions and Answers

Question: Do these sensors require programming before installation?

Answer: No, these sensors come pre-programmed for the specific Hyundai models listed. You only need to activate them using a scan tool or perform a re-learning procedure after installation.

Question: Will these sensors work on a Hyundai Santa Fe TM from 2020?

Answer: Yes, the Santa Fe TM model years from 2018 to 2024 are supported by these sensors.

Question: How long does the battery last in these TPMS sensors?

Answer: The battery life is approximately three years, depending on driving conditions and usage.

Question: Can I install these sensors myself?

Answer: Installation requires removing the tire from the rim, so professional installation by a tire shop or mechanic is recommended to ensure proper sealing and avoid damage.

Question: What frequency do these sensors use?

Answer: These sensors operate at 433MHz, which is the standard frequency for many Hyundai TPMS systems.

Replace your worn-out or failed tire pressure sensors with a set of four direct-fit 56029398AB TPMS units. Operating at 433MHz, these sensors are designed to restore your vehicle's tire pressure monitoring system to full working condition. They come ready to install and are compatible with a wide range of Chrysler, Jeep, Dodge, Ram, and Fiat models.

Keeping your tires at the correct pressure is key to safe driving and better fuel economy. These TPMS sensors provide real-time pressure data to your car's onboard computer, alerting you when pressure drops too low. With a durable construction of ABS plastic and metal, they are built to withstand the harsh conditions inside your tire assembly.

This set of four sensors covers all your wheels, making it a complete replacement solution. They match the specifications of original equipment part numbers 56029398AB and 68241067AA, ensuring a smooth and reliable connection with your vehicle's system. No need to visit a dealership for an expensive replacement.

Key Features and Benefits

- 433MHz operating frequency that ensures a stable and accurate signal to your vehicle's TPMS receiver.

• Direct OE replacement for part numbers 56029398AB and 68241067AA, making installation straightforward and hassle-free.

• Constructed from ABS plastic and metal for long-lasting durability inside the tire assembly.

• Pack of four sensors provides a complete set for all wheels, saving you the trouble of buying them individually.

• Restores your tire pressure monitoring system, helping you maintain proper tire inflation for safer handling and better fuel economy.

Who Is This For

- Owners of Chrysler 300, Town & Country, Grand Voyager, Voyager, or Ypsilon from model years 2010 to 2021.

• Drivers of Jeep Wrangler, Grand Cherokee, or Compass looking for a reliable replacement TPMS sensor.

• Dodge owners with models like Charger, Durango, Grand Caravan, Journey, or Caravan from 2010 to 2020.

• Ram truck owners with Ram Series or Ram Cargo models from 2010 to 2015.

• Fiat 500, 500L, and Freemont owners needing a complete sensor set.

Usage Scenario

Mark noticed the TPMS warning light on his 2014 Jeep Wrangler had been on for weeks. After checking his tire pressures manually, he knew the sensors were at fault. He ordered this four-pack of 56029398AB sensors, had them installed by his local mechanic in under an hour, and the warning light turned off immediately. Now he drives with confidence, knowing his system is working again.

Micro Comparison

Unlike generic universal sensors that require complex programming and may not communicate reliably with your vehicle, these sensors are designed to match the exact specifications of your Chrysler, Jeep, or Dodge factory system. They offer a direct plug-and-play replacement without the guesswork. Choosing this set saves you time and ensures accurate tire pressure readings from the moment they are installed.

Specifications

OE Number: 56029398AB, 68241067AA

Frequency: 433MHz

Material: ABS plastic + metal

Package Includes

- 4 x Tire Pressure Sensor

Why You Will Love It

You will love the peace of mind that comes with a fully functional TPMS. This complete set of four sensors gets the job done in one purchase, eliminating the need to hunt for individual replacements. It helps you keep your tires properly inflated, which can extend tire life and improve your vehicle's fuel efficiency.

Questions and Answers

Question: Will these sensors work on my 2012 Jeep Grand Cherokee?

Answer: Yes, these sensors are compatible with the Jeep Grand Cherokee from 2010 to 2015 and 2011 to 2019 model years.

Question: Do I need to program these sensors before installation?

Answer: These sensors are designed to be a direct replacement. They typically need to be programmed or learned by your vehicle's TPMS tool or a compatible scan tool after installation.

Question: Are these sensors a direct fit for the original valve stems?

Answer: Yes, they are designed as a direct OE replacement and should fit the standard valve stem locations on your wheels.

Question: What is the operating frequency of these sensors?

Answer: They operate at 433MHz, which is the standard frequency for many Chrysler, Jeep, and Dodge TPMS systems.

Question: Will these sensors work on a 2014 Dodge Charger?

Answer: Yes, they are compatible with the Dodge Charger from 2010 to 2014 and also the 2016 model year.

Replace your worn-out or faulty tire pressure sensors with these 4Pcs 56029398AB TPMS sensors. Operating at 433MHz, these sensors are designed to fit a wide range of Chrysler, Dodge, Jeep, Fiat, and Ford vehicles. They provide accurate tire pressure monitoring to help you maintain proper inflation and improve safety on the road.

These direct-fit TPMS sensors are a reliable replacement for your vehicle's original equipment. They are compatible with both US and European market models, covering popular vehicles like the Dodge Charger, Durango, Journey, RAM Series, and Jeep Grand Cherokee. With OEM numbers 56029398AB, 68142397AA, and 68241067AB, you can be confident in their compatibility.

Keeping your tires at the correct pressure improves fuel efficiency, extends tire life, and enhances handling. These TPMS sensors alert you when pressure drops, helping you avoid dangerous driving conditions. The set includes four sensors, making it easy to replace all sensors at once for consistent performance.

Installation is straightforward for a professional or experienced DIYer. Each sensor is pre-programmed and ready to sync with your vehicle's system. Simply have them installed and programmed at a tire shop or follow your vehicle's relearn procedure.

Key Features and Benefits

- 433MHz operating frequency that provides reliable wireless tire pressure data

• Direct replacement design that fits multiple Chrysler, Dodge, Jeep, and Fiat models

• Compatible with both US and European market vehicles for broad application

• Set of 4 sensors that allows complete replacement for consistent monitoring

• OEM numbers 56029398AB, 68142397AA, 68241067AB ensure accurate fitment

Who Is This For

- Owners of Dodge Charger (2010-2014) or Dodge Durango (2011-2020) needing TPMS replacement

• Drivers of Jeep Grand Cherokee (2011-2019) or Jeep Wrangler (2010-2019) looking for direct-fit sensors

• Fiat 500 (2011-2014) or Fiat 500L (2007-2021) owners seeking a reliable sensor set

• Chrysler 300 (2011-2015) or Chrysler Town & Country (2011-2015) drivers wanting to maintain tire safety

Usage Scenario

Mark noticed his Dodge Grand Caravan's tire pressure light flickering on cold mornings. He checked the pressure manually, but the light kept returning. After a quick inspection, he learned his original TPMS sensors were over five years old and failing. He ordered this 4-pack of 56029398AB sensors, had them installed at his local tire shop during a routine rotation, and the warning light disappeared. Now Mark drives with confidence, knowing his tires are properly monitored.

Micro Comparison

While some universal TPMS sensors require complex programming and adapters, these direct-fit sensors are designed specifically for your vehicle's system. They match the OEM specifications, so you avoid compatibility issues and the hassle of custom programming. This set offers a straightforward replacement that works right out of the box after proper installation.

Specifications

- OEM Number: 56029398AB, 68142397AA, 68241067AB

• Frequency: 433MHz

• Quantity: 4 sensors per set

Package Includes

- 4 x TPMS Tire Pressure Monitor Sensors

Why You Will Love It

You will love the peace of mind that comes with accurate tire pressure monitoring. These sensors help you avoid unexpected flats and improve fuel economy. With a direct-fit design and broad vehicle compatibility, this set makes replacing old sensors simple and cost-effective.

Questions and Answers

Question: Will these sensors work on my 2013 Dodge Charger?

Answer: Yes, these sensors are compatible with Dodge Charger models from 2010 to 2014.

Question: Do I need to program these sensors myself?

Answer: They are pre-programmed but may require a relearn procedure using a TPMS tool or your vehicle's manual method.

Question: Are these sensors for the US market or European market?

Answer: They are compatible with both US and European market vehicles as listed in the fitment guide.

Question: How long does installation typically take at a tire shop?

Answer: A tire shop can usually install and program all four sensors in about 30 to 60 minutes.

Question: Can I use these sensors on a 2015 Jeep Grand Cherokee?

Answer: Yes, they fit Jeep Grand Cherokee models from 2011 to 2019, including the 2015 model.

Keep your tires at the right pressure with this set of four TPMS sensors. They are designed for a wide range of Audi, Skoda, Porsche, and Volkswagen models. This direct replacement part helps you monitor tire pressure and improve road safety.

These sensors use a 433MHz frequency and come pre-programmed for your specific vehicle. They are a direct fit for models like the Audi RS3, Skoda Kodiaq, Porsche 718, and VW Golf. The set includes four sensors, one for each wheel, to give you complete coverage.

The sensors are built to last, with a battery life of about three years. They are a reliable replacement for your old or faulty units. Easy to install, they help you avoid the guesswork of checking tire pressure manually.

Driving with properly inflated tires is safer and more fuel-efficient. These sensors give you real-time data, so you can react quickly to pressure changes. Enjoy a smoother ride and better control on the road.

Key Features and Benefits

- 433MHz frequency that ensures reliable data transmission from your tire to the dashboard display.

• Pre-programmed for your specific vehicle make and model, which makes installation straightforward and saves you time.

• Battery life of about three years that provides long-term, maintenance-free operation.

• Direct replacement for OEM part numbers 5Q0907275F, 5Q0907275B, and others, which guarantees a perfect fit.

• Set of four sensors that covers all wheels for a complete tire pressure monitoring system.

Who Is This For

- Owners of Audi RS3, Q5, A3, A6, or other compatible Audi models who need a sensor replacement.

• Drivers of Skoda Kodiaq looking for a reliable TPMS upgrade or replacement.

• Porsche 718, 911, Macan, or Cayenne owners who want to keep their tire pressure system working.

• VW Golf, Jetta, Arteon, Passat, or Tiguan drivers needing a direct-fit sensor set.

Usage Scenario

Mark noticed a low tire pressure warning light on his Audi A3 dashboard. After checking the tires, he found one sensor was not working. He ordered this set of four 5Q0907275F sensors. After installing them, the warning light went off, and he could see the exact pressure for each tire on his display. Now he drives with confidence, knowing his tires are properly inflated.

Micro Comparison

While generic universal sensors need complex programming, these sensors come pre-programmed for your specific vehicle. This means you can install them with a simple relearn procedure using a scan tool. They are a direct OEM replacement, so you do not have to worry about compatibility issues.

Specifications

Frequency: 433MHz

Battery Life: About 3 years

Interchange Part Numbers: 5Q0907275F, 5Q0 907 275 F, 5Q0907275B, 5Q0907275, 3AA998275, 5Q0998270, 5Q0998270B

Package Includes

- 4 x Tire Pressure Monitoring System Sensors

Why You Will Love It

You will appreciate the peace of mind that comes from knowing your tire pressure is always correct. These sensors help you avoid unexpected flats and improve your car's fuel economy. It is a simple upgrade that makes your daily drive safer and more efficient.

Questions and Answers

Question: What frequency do these sensors use?

Answer: They use a 433MHz frequency.

Question: Do I need to program these sensors before installing them?

Answer: They come pre-programmed for your specific vehicle make and model. You will need to activate them by performing a relearn procedure with a scan tool.

Question: How long does the battery last in these sensors?

Answer: The battery life is about three years.

Question: Which car models are compatible with this sensor set?

Answer: They fit many Audi, Skoda, Porsche, and Volkswagen models including the Audi RS3, Skoda Kodiaq, Porsche 718, and VW Golf.

Question: What is the relearn procedure for these sensors?

Answer: You can use a compatible scan tool to perform the relearn procedure after installation.

Replace your worn or faulty TPMS sensors with this set of four direct-fit tire pressure sensors, designed specifically for the Jeep Cherokee KL from 2013 to 2020. These sensors operate at a 434MHz frequency and match the factory specifications of your vehicle, helping to restore your tire pressure monitoring system without the need for complex programming.

Each sensor is a direct replacement for your original equipment, fitting into the front, left, rear, and right positions on your vehicle. They come pre-programmed for your specific make, model, and year, so you can install them with confidence. A simple activation process using a scan tool or a "re-learning" procedure is all that is needed to get them working.

Maintaining proper tire pressure is key to safe driving and better fuel economy. These sensors alert you to low tire pressure, helping you avoid uneven tire wear, blowouts, and poor handling. With a battery life of about three years, they provide reliable, long-term performance for your daily commute or long road trips.

Installation is recommended to be done by a trained professional. The sensors are designed to be a hassle-free upgrade, saving you time and the cost of a dealership visit. Keep your Jeep Cherokee's tire pressure monitoring system running smoothly with these compatible, high-quality sensors.

Key Features and Benefits

- Direct replacement design that fits your Jeep Cherokee KL from 2013 to 2020, ensuring a simple swap with your old sensors.

• Pre-programmed sensors that require no additional programming, saving you time and the need for specialized equipment.

• 434MHz operating frequency that matches your vehicle's factory system, providing accurate and consistent tire pressure readings.

• Battery life of about three years, offering dependable performance and reducing the frequency of replacements.

• Compatible with multiple OE part numbers including 68249197AA, 68239720AB, 68239720AC, 68239720AA, and 68157568AA, giving you a wide fitment range.

Who Is This For

- Jeep Cherokee KL owners from model years 2013 to 2020 who need to replace a faulty or dead TPMS sensor.

• DIY car owners who want a direct-fit, pre-programmed sensor to avoid a trip to the dealership for programming.

• Drivers looking for a cost-effective way to restore their tire pressure monitoring system and improve safety on the road.

• Mechanics and auto shops seeking reliable, compatible TPMS sensors for customer vehicles.

Usage Scenario

Mark noticed his Jeep Cherokee's tire pressure warning light was flickering on and off. After a quick check, he found one of his TPMS sensors had stopped working. Instead of spending a lot at the dealership, he ordered this set of four sensors. In less than an hour at his local mechanic, the old sensors were swapped out, and the new ones were activated. The warning light turned off, and Mark felt confident driving his family on their weekend trip, knowing his tire pressure was being monitored correctly.

Micro Comparison

Unlike universal TPMS sensors that require complex programming and cloning, these sensors come pre-programmed for your specific Jeep Cherokee KL. This eliminates the need for a special programming tool and reduces the chance of installation errors. They are a direct replacement for your original sensors, so you get a reliable fit without any guesswork.

Specifications

Sensor Type: Tire Pressure Monitoring Sensor

Operating Frequency: 434MHz

Battery Life: About 3 years

Placement on Vehicle: Front, Left, Rear, Right

Fitment Type: Direct Replacement

Interchange Parts Number: 68249197AA, 68239720AB, 68239720AC, 68239720AA, 68157568AA

Package Includes

- 4 x Tire Pressure Sensors

Why You Will Love It

Restore your Jeep's safety system with a set of sensors that fit perfectly and work right out of the box. You will save money compared to a dealership replacement and gain the peace of mind that comes from knowing your tire pressure is always accurate. It is a simple, reliable upgrade that keeps you and your passengers safe on every drive.

Questions and Answers

Question: Do these sensors need to be programmed before installation?

Answer: No, they come pre-programmed for your specific Jeep Cherokee KL model year. You only need to activate them using a scan tool or perform a "re-learning" procedure after installation.

Question: What is the operating frequency of these TPMS sensors?

Answer: They operate at 434MHz, which matches the factory frequency for your Jeep Cherokee KL.

Question: How long does the battery in these sensors last?

Answer: The battery life is about three years, depending on usage and driving conditions.

Question: Can I install these sensors myself?

Answer: Installation involves dismounting the tire and handling the sensor components. It is recommended to have them installed by a trained professional to ensure proper fit and function.

Question: Will these sensors fit my 2016 Jeep Cherokee?

Answer: Yes, these sensors are designed for the Jeep Cherokee KL from 2013 to 2020. Please confirm your vehicle's OE part number, such as 68249197AA or 68239720AB, to ensure a perfect match.

Give your vehicle a quick style upgrade with these 4 metal alien-themed tire valve caps. Made from durable metal, they replace your standard plastic caps and add a fun, unique look to your car, truck, or motorcycle. Each cap is designed to fit standard tire valve stems and comes in a sleek black finish.

These valve stem covers are not just about appearance. They also help keep dirt and moisture out of your valve stems, which can help maintain proper tire pressure. The metal construction feels solid and secure, so you won't have to worry about them cracking or fading like plastic ones often do.

Installing them takes just a few seconds. Simply screw off your old caps and screw on these new ones. They fit most cars, trucks, SUVs, and motorcycles with standard valve stems. Whether you want to add a subtle personal touch or just need a reliable replacement, these caps deliver both style and function.

Key Features and Benefits

- Metal construction that feels sturdy and lasts longer than plastic caps

• Alien design that gives your wheels a distinctive, fun look

• Helps keep valve stems clean and protected from dust and moisture

• Universal fit for standard tire valve stems on cars, trucks, and bikes

• Black color that matches most wheel styles and rims

Who Is This For

- Car owners who want a simple and affordable way to personalize their vehicle

• Truck and SUV drivers looking for durable metal valve caps that can handle rough conditions

• Motorcycle riders who want a small detail that adds character to their bike

• Anyone replacing lost or broken plastic valve caps with a more durable metal option

Usage Scenario

Mark had been driving his pickup truck for years with the same old black plastic valve caps. One day, he noticed one was cracked and another was missing. He picked up this set of metal alien caps and screwed them on in under a minute. Now, every time he fills up at the gas station, he gets a few comments from other drivers who notice the fun design. More importantly, he feels good knowing the metal caps will hold up better than the plastic ones ever did.

Micro Comparison

Standard plastic valve caps often crack under sun exposure or get lost easily. These metal valve caps are more durable and stay securely in place. The alien design also gives your wheels a unique look that plain black or chrome caps just don't offer.

Specifications

- Material: Metal

• Color: Black

• Quantity: 4 pieces

Package Includes

- 4 x Alien Tire Valve Caps

Why You Will Love It

These caps are a small upgrade that makes a big difference in your vehicle's appearance. They are easy to install, built to last, and add a touch of personality that sets your ride apart. Plus, they help protect your valve stems from the elements, giving you peace of mind every time you hit the road.

Questions and Answers

Question: Will these fit my car?

Answer: Yes, they fit standard tire valve stems found on most cars, trucks, SUVs, and motorcycles.

Question: Are these made of plastic or metal?

Answer: They are made of metal, which makes them more durable than plastic caps.

Question: Do they come with a tool to install them?

Answer: No tool is needed. You just screw them on by hand like regular valve caps.

Question: Will the alien design fade over time?

Answer: The black finish is durable and should hold up well under normal driving conditions.

Question: Can I use these on my motorcycle?

Answer: Yes, as long as your motorcycle has standard valve stems, they will fit.

Replace those worn-out plastic valve caps with a set of durable aluminum alloy dust covers designed to fit SsangYong models like the Musso, Korando, Rexton, Torres, and Kyron. These caps protect your tire valves from dirt, moisture, and road debris, helping maintain stable tire pressure over time.

Each cap features a high-quality sealing ring inside that creates a snug fit against the valve stem. This simple upgrade reduces the risk of slow air leaks caused by a loose or damaged cap. The aluminum alloy construction resists corrosion and holds up better than standard plastic caps through all weather conditions.

Installation takes just seconds. Simply screw each cap onto your existing tire valve stem by hand. No tools are needed. The compact size fits flush against the wheel, so they won't interfere with your tire pressure monitoring system or get in the way during inflation.

Choose from multiple color options to add a subtle personal touch to your wheels. The set includes four caps, one for each tire, giving your vehicle a clean, finished look while providing practical protection.

Key Features and Benefits

- Aluminum alloy construction that resists rust and corrosion for long-lasting use

• Built-in sealing ring that helps prevent air leaks and keeps tire pressure stable

• Dust-proof design that shields the valve core from clay, water, snow, and road grime

• Easy hand-tight installation with no tools required for a secure fit

• Compact profile that sits flush against the wheel and works with TPMS sensors

Who Is This For

- SsangYong owners looking for a simple upgrade to replace factory plastic valve caps

• Drivers who want to protect tire valves from dirt and moisture during off-road or winter driving

• Car enthusiasts who prefer metal accessories over plastic for added durability and a cleaner look

• Anyone maintaining multiple vehicles who needs a quick, affordable way to keep tire valves sealed

Usage Scenario

After a long winter, Mark noticed his tire pressure light kept flickering on his SsangYong Rexton. He checked each tire and found the plastic valve caps were cracked and letting in moisture. He swapped them out with this aluminum alloy set. The snug sealing rings stopped the slow leaks, and the metal caps stayed tight even on rough gravel roads. Now his tire pressure stays consistent, and the colored caps give his wheels a subtle upgrade.

Micro Comparison

Standard plastic valve caps can crack under UV exposure and temperature changes, which allows dirt and moisture to reach the valve core. These aluminum alloy caps are more resistant to weathering and include a sealing ring that plastic caps typically lack. The result is better long-term protection for your tire valves without adding bulk or requiring special tools to install.

Specifications

- Material: aluminum alloy

• Size: 1.7 x 0.8 cm / 0.67 x 0.31 in

• Color options: black, red, green, blue, gray, silver

Package Includes

- 4 x car tire valve caps

Why You Will Love It

These caps give you a quick, affordable way to protect a small but important part of your tires. The metal build feels more substantial than plastic, and the included sealing rings add real peace of mind against slow leaks. A simple upgrade that takes one minute to install and keeps working season after season.

Questions and Answers

Question: Will these fit my SsangYong Musso?

Answer: Yes, these caps are designed to fit SsangYong models including the Musso, Korando, Rexton, Torres, and Kyron. They use a standard valve thread size that fits most passenger vehicles.

Question: Do I need any tools to install these valve caps?

Answer: No tools are needed. Simply screw each cap onto your tire valve stem by hand until snug.

Question: Will these caps interfere with my tire pressure monitoring system?

Answer: No. The compact size is designed to work with standard TPMS sensors without blocking or interfering with readings.

Question: What colors are available?

Answer: The set comes in black, red, green, blue, gray, and silver options. You can choose the color that matches your vehicle or personal style.

Question: Do these caps help prevent air leaks?

Answer: Yes. Each cap has a built-in sealing ring that creates a tight seal against the valve stem, which helps reduce the risk of slow air leaks caused by loose or damaged plastic caps.

Keep your BYD tire valves clean, sealed, and looking sharp with this set of four aluminum alloy valve caps. Designed to block out dust, water, and road grime, they help maintain stable tire pressure while adding a subtle custom touch to your wheels.

These caps replace standard plastic covers with a more durable metal build. Each cap features a built-in sealing ring that helps prevent air leaks around the valve stem. The threaded design screws on easily by hand and stays secure during driving.

Choose from red, black, or silver to match your BYD Atto 3, Yuan Plus, Han, Tang EV, F3, E6, Dmi Song, F0, Qin Pro, G3, I3, Ea1 Max, G6, or 2din. The compact size fits standard tire valves without adding bulk or interfering with valve operation.

Installation takes seconds with no tools required. Simply remove your old caps and screw on these metal replacements. They stay put on rough roads and resist corrosion from rain, snow, and road salt.

Key Features and Benefits

- Aluminum alloy construction that resists rust and corrosion for long-lasting use

• Built-in sealing ring that helps prevent slow air leaks from the valve stem

• Dustproof and waterproof design that keeps dirt, mud, and moisture away from the valve core

• Easy hand-tight installation with no tools or adapters needed

• Available in three colors to coordinate with your car's look

• Universal fit for most standard tire valves including BYD models

Who Is This For

- BYD owners who want to replace worn or missing plastic valve caps with a metal upgrade

• Drivers who park outdoors or drive on dusty roads and need extra valve protection

• Anyone looking to add a small color accent to their wheels without spending much

• Car enthusiasts who prefer durable metal parts over disposable plastic covers

Usage Scenario

After noticing one of his plastic valve caps had cracked and let dirt into the valve stem, Mark ordered this set for his BYD Atto 3. He screwed on the red aluminum caps in under two minutes. A month later, after driving through rain and gravel roads, all four caps stayed tight and clean. His tire pressure remained steady, and the red accents gave his wheels a sportier look.

Micro Comparison

Standard plastic valve caps can crack from UV exposure and temperature changes, letting moisture and dust reach the valve core. These aluminum alloy caps resist weather and impact better than plastic. The included sealing ring adds an extra layer of protection that most basic metal caps lack, helping maintain consistent tire pressure over time.

Specifications

- Material: Aluminum alloy

• Color options: Red, black, silver

• Size option A: 1.5 x 1 cm / 0.6 x 0.4 in

• Size option B: 1.2 x 0.9 cm / 0.5 x 0.4 in

• Weight per set: 20 g / 0.7 oz

Package Includes

- 4 x Universal car valve stem caps

Why You Will Love It

These caps give you a simple way to protect your tire valves without spending much. The metal build feels more solid than plastic, and the color options let you personalize your car. Once installed, you can forget about them — they just work in the background keeping dirt out and air in.

Questions and Answers

Question: Will these fit my BYD Atto 3 tire valves?

Answer: Yes, these caps fit standard tire valves used on BYD Atto 3 and most other BYD models.

Question: Do these caps prevent tire air leaks?

Answer: The built-in sealing ring helps reduce the chance of slow leaks through the valve stem, but they do not fix existing valve damage.

Question: Are these caps made of metal or plastic?

Answer: They are made of aluminum alloy, which is more durable than plastic and resists rust.

Question: Can I choose a different color for each cap?

Answer: Each set contains four caps of the same color. You would need to buy multiple sets for mixed colors.

Question: Do I need tools to install these valve caps?

Answer: No tools are required. Simply screw them on by hand until snug.

Question: Will these caps fit on aftermarket wheels?

Answer: They fit standard tire valve stems on most factory and aftermarket wheels that use a standard valve.

Give your LYNK&CO a clean, custom look while protecting your tire valves from dirt and moisture. These four aluminum alloy valve caps replace plastic factory caps with a more durable and stylish solution.

Each cap is made from aluminum alloy, offering a solid feel and lasting resistance to rust and corrosion. The set includes an inner sealing ring that helps keep air in and debris out, supporting stable tire pressure over time. Available in black, red, green, blue, gray, and silver, you can match your car's color or add a subtle accent.

Installation takes seconds with no tools required. Simply screw each cap onto your tire valve stem for an instant upgrade that combines function and appearance. These caps are designed to fit standard tubeless tire valves and are compatible with LYNK&CO 01 EM-P, EM-F, 02 Hatchback, 03, 05, and 06 models.

Keep your valve cores safe from clay, water, and snow with these aluminum alloy dust covers. They help prevent flat tires caused by debris entering the valve, giving you one less thing to worry about on the road.

Key Features and Benefits

- Aluminum alloy construction that resists rust and lasts longer than plastic

• Built-in sealing ring that helps prevent air leaks and flat tires

• Easy screw-on installation that takes seconds with no tools needed

• Dust proof design that protects the valve core from dirt, water, and snow

• Available in six colors to match or accent your vehicle's style

Who Is This For

- LYNK&CO owners looking to replace worn or plain plastic valve caps

• Drivers who want a durable, rust-resistant upgrade for their tire valves

• Car enthusiasts who enjoy adding small custom touches to their vehicle

• Anyone wanting to protect tire valve cores from weather and road debris

Usage Scenario

Mike noticed his factory plastic valve caps were cracked and letting dust in. After a quick tire pressure check, he swapped them out for these aluminum alloy caps in silver to match his LYNK&CO 03. The sealing ring gave him confidence that his tire pressure would stay steady, and the clean metal finish looked much better than the old plastic.

Micro Comparison

Plastic valve caps can crack, fade, or let dirt into the valve over time. These aluminum alloy caps offer a stronger, more durable alternative with a built-in sealing ring for extra protection. They also give your wheels a more finished look without the high cost of custom lug nuts or center caps.

Specifications

- Material: Aluminum alloy

• Size: 1.7 x 0.8 cm / 0.67 x 0.31 in

• Color options: Black, red, green, blue, gray, silver

• Quantity: 4 pieces per set

Package Includes

- 4 x Aluminum alloy tire valve caps

Why You Will Love It

These valve caps are a simple way to add durability and style to your car. The aluminum alloy build and sealing ring give you practical protection, while the color options let you personalize your ride. It is a small upgrade that makes a noticeable difference every time you see your wheels.

Questions and Answers

Question: Will these fit my LYNK&CO 01?

Answer: Yes, these caps are designed to fit standard tire valves on LYNK&CO 01, 02, 03, 05, and 06 models.

Question: Do they come with a sealing ring?

Answer: Yes, each cap has a high quality sealing ring inside to help prevent air leaks.

Question: Are these caps rust proof?

Answer: They are made of aluminum alloy, which resists rust and corrosion.

Question: How do I install them?

Answer: Simply screw each cap onto your tire valve stem by hand. No tools are required.

Question: What colors are available?

Answer: You can choose from black, red, green, blue, gray, or silver.

Replace your factory plastic valve caps with durable aluminum alloy tire valve stem caps designed specifically for Smart models including Fortwo, Forfour, Forjeremy, Forvision, Brabus Roadster, and the 451 and 453 generations. These caps provide a secure seal to help maintain stable tire pressure and prevent flat tires caused by air leaks.

Each cap features a high-quality sealing ring inside to block dirt, moisture, and road debris from reaching the valve core. The metal construction offers a more robust feel compared to standard plastic caps and adds a subtle custom look to your wheels. Choose from red, black, or silver to match your vehicle's style.

Installation takes just seconds — simply screw each cap onto your existing tire valve stems. No tools are required. The set includes four caps, enough for a complete vehicle.

Key Features and Benefits

- Aluminum alloy material that resists corrosion and wear better than plastic caps

• Built-in sealing ring that helps prevent slow air leaks and flat tires

• Dust-proof design that protects the valve core from clay, water, and snow

• Easy screw-on installation that requires no tools or professional help

• Available in three colors to complement your car's look

Who Is This For

- Smart owners looking to upgrade from stock plastic valve caps

• Drivers who want extra protection against tire pressure loss from debris or moisture

• Anyone replacing lost or worn-out valve stem caps on their Smart vehicle

• Car enthusiasts who prefer metal accessories over plastic for durability

Usage Scenario

Mark noticed his Smart Fortwo's tire pressure dropped more often during rainy weeks. After switching to these aluminum valve caps with sealing rings, he found the pressure stayed consistent longer. The simple five-second swap saved him from frequent trips to the air pump and gave his wheels a cleaner look.

Micro Comparison

Basic plastic caps may crack over time or let in moisture that can corrode the valve core. These aluminum alloy caps offer a tighter seal with their internal sealing ring and hold up better against weather and road grime. The metal construction also resists damage from hand tightening and removal.

Specifications

- Material: aluminum alloy

• Color options: red, black, silver

• Size A: 1.5 x 0.8 cm / 0.6 x 0.3 in

• Size B: 1.1 x 0.9 cm / 0.4 x 0.4 in

• Set includes: 4 caps

Package Includes

- 4 x tire valve stem caps

Why You Will Love It

These caps give you a simple upgrade that protects your tires and keeps your wheels looking clean. The metal build and choice of colors let you personalize your Smart without spending much. You get peace of mind knowing your valve stems are sealed against the elements.

Questions and Answers

Question: Will these fit my Smart Fortwo 451?

Answer: Yes, these caps are designed for Smart Fortwo, Forfour, Forjeremy, Forvision, Brabus Roadster, and models 451 and 453.

Question: Do these caps prevent air from leaking out?

Answer: The built-in sealing ring helps reduce air loss compared to standard caps, but they are not a permanent fix for a damaged valve core.

Question: Are these caps easy to install?

Answer: Yes, simply screw them onto your existing tire valve stems. No tools are needed.

Question: What colors are available?

Answer: Red, black, and silver.

Question: How many caps come in a set?

Answer: Four caps, enough for one vehicle.

These aluminum grenade-style tire valve caps add a rugged look to your car, truck, or bike while keeping your tire valves sealed from dust and debris. Made from durable aluminum alloy, they are designed to fit standard tire valve stems for a secure and tight connection.

Give your vehicle a subtle custom touch with these machined valve stem covers. The grenade shape stands out without being flashy, and the aluminum construction resists corrosion better than standard plastic caps. Each set includes four caps, enough for a full set of car or truck tires.

Installation is simple. Just remove your existing valve caps and screw these on by hand until snug. No tools are needed. The internal threading is designed for a tight fit on standard tire valve stems, helping to prevent air leaks and keep your valves clean.

These caps come in multiple color options so you can match your vehicle's style or add a small accent. The aluminum alloy material is lightweight yet tough, and the CNC machining ensures a precise fit and a clean finish.

Key Features and Benefits

- Aluminum alloy construction that resists rust and corrosion for long-lasting use

• Grenade-style design that adds a unique look to your tires without being oversized

• Standard fit for most car, truck, SUV, and bike tire valve stems for easy installation

• Multiple color choices that let you personalize your vehicle's appearance

• CNC machined for a precise thread fit that helps keep dust and dirt out

Who Is This For

- Car owners who want a simple visual upgrade for their wheels

• Truck and SUV drivers looking for durable valve caps that can handle rough conditions

• Motorcycle and bike riders who want a smaller, lightweight option for their tire valves

• Anyone replacing lost or cracked plastic valve caps with a metal alternative

Usage Scenario

Mark noticed his old plastic valve caps were cracked and letting dust into the valve stems. He swapped them out for these aluminum grenade caps in about two minutes. Now his truck's tires look cleaner, and he does not worry about dirt getting into the valves during off-road trips.

Micro Comparison

Standard plastic valve caps can crack or loosen over time, especially in hot weather or rough driving conditions. These aluminum alloy caps are more durable and resist corrosion better than most plastic or chrome-plated options. The grenade shape gives a subtle custom look without being overly flashy, making them a practical upgrade for everyday drivers.

Specifications

Material: aluminum alloy

Color: black, red, blue, silver, gold, green

Product name: grenades

Package Includes

- 4 x Tire valve caps

Why You Will Love It

These caps give your vehicle a small custom touch without a big investment. The aluminum build feels solid in your hand and holds up better than plastic. With six color options, you can match your car's style or add a subtle accent that stands out just enough.

Questions and Answers

Question: Will these fit my car's tire valves?

Answer: Yes, they fit standard tire valve stems found on most cars, trucks, SUVs, and bikes.

Question: Do these caps prevent air from leaking out?

Answer: They help seal the valve opening against dust and debris, but they are not designed to fix existing valve leaks.

Question: How do I install them?

Answer: Simply unscrew your old valve caps and screw these on by hand until tight. No tools required.

Question: Are these caps heavy?

Answer: No, they are made from lightweight aluminum alloy, so they will not unbalance your tires.

Question: Do they come in a set of four?

Answer: Yes, each package includes four caps, enough for a full set of car or truck tires.

Give your vehicle a custom look while protecting your tire valves from dirt and moisture. These grenade-shaped valve stem caps are made from high-strength aluminum alloy and fit most cars, trucks, SUVs, motorcycles, and bicycles. A simple upgrade that adds style and function in seconds.

These valve caps are machined from 6063 aluminum using CNC technology for a precise fit and long-lasting durability. Each cap screws directly onto your existing tire valve stem, creating a tight seal that keeps out dust, debris, and air contaminants. The threaded interior grips the valve firmly so the cap stays secure even at highway speeds.

Available in six eye-catching colors, you can match your vehicle's paint, wheels, or accessories. The compact grenade shape gives your tires a rugged, performance-inspired appearance without adding bulk. Each pack includes four caps, enough for one full set of tires, with a spare for your spare tire or a friend.

Installation takes less than a minute with no tools required. Simply unscrew your old plastic valve caps and thread these aluminum caps on by hand until snug. The corrosion-resistant aluminum holds up against rain, road salt, and UV exposure, keeping your valves protected season after season.

Key Features and Benefits

- CNC-machined 6063 aluminum alloy construction that resists corrosion and daily wear

• Grenade-shaped design that gives your tires a bold, custom appearance

• Universal fit that works on most car, truck, SUV, motorcycle, and bicycle valve stems

• Six color choices that let you personalize your ride or match existing accents

• Threaded interior that creates a dust-tight seal to keep valve cores clean and functional

Who Is This For

- Car owners who want a quick visual upgrade without spending much

• Truck and SUV drivers looking for durable metal valve caps that handle rough conditions

• Motorcycle and bicycle riders who need compact caps that won't interfere with spokes

• Anyone replacing cracked or missing plastic valve caps with something more reliable

Usage Scenario

Mike noticed his factory plastic valve caps were cracking after a harsh winter. He ordered a set of these aluminum grenade caps in silver to match his truck's wheels. He replaced all four caps in about two minutes. Now his valve stems stay clean and the caps add a subtle custom touch every time he walks up to his truck.

Micro Comparison

Standard plastic valve caps can crack, fade, or fall off over time. These aluminum caps are machined from solid 6063 alloy, so they hold up better against weather and road debris. The threaded design also seals more tightly than push-on caps, keeping dirt and moisture away from your valve core.

Specifications

Material: 6063 aluminum alloy

Color options: black, red, blue, silver, gold, green

Quantity: 4 caps per pack

Package Includes

- 4 x Tire valve caps

Why You Will Love It

These caps are a small upgrade with a big visual payoff. You get the durability of machined aluminum and the freedom to pick a color that fits your style. They screw on in seconds and stay put mile after mile.

Questions and Answers

Question: Will these fit my car's tire valves?

Answer: Yes, these caps fit standard Schrader valves found on most cars, trucks, SUVs, motorcycles, and bicycles.

Question: Do these caps have an O-ring inside for a better seal?

Answer: The caps use a threaded metal-to-metal fit. The threads grip the valve stem tightly to keep out dust and debris.

Question: Can I use these on my motorcycle?

Answer: Yes, they fit standard motorcycle valve stems. The compact shape does not interfere with spokes or brake rotors.

Question: How do I choose the right color?

Answer: Pick a color that matches your vehicle's paint, wheels, or trim. The caps are available in black, red, blue, silver, gold, and green.

Question: Will these caps rust or corrode?

Answer: No, the caps are made from aluminum alloy, which naturally resists rust and corrosion from rain, road salt, and UV exposure.

Show off your European pride and protect your tires with these 4 durable aluminum valve caps. Each cap features a distinct emblem for Germany, France, or Italy, letting you add a personal and patriotic touch to your car or motorcycle. They are a simple upgrade that combines style with practical protection for your tire valves.

These valve caps are crafted from high-quality aluminum, making them resistant to rust and corrosion. They screw on easily to replace your standard plastic caps. Their main job is to seal the valve stem, preventing air leaks and keeping out dirt, dust, and moisture that can cause damage over time. By protecting the valve core from water, clay, and snow, they help you maintain stable tire pressure.

The set includes four caps, which is perfect for most cars and motorcycles. The design is universal and fits all standard tire valves, so you can install them in seconds without any tools. Whether you are a fan of German engineering, French style, or Italian flair, these caps are a subtle and cool way to represent your favorite country on the road.

Key Features and Benefits

- High-quality aluminum construction that resists rust and corrosion for long-lasting use.

• Distinct Germany, France, and Italy flag emblems that let you show your national pride or personal style.

• Easy to install by simply screwing them onto the air valve, no tools required.

• Protects your air valve from leakage, dirt, and other external damage to help maintain tire pressure.

• Prevents corrosion of the valve core caused by direct contact with clay, water, and snow.

Who Is This For

- Car and motorcycle owners who want to add a personalized style element to their wheels.

• Fans of Germany, France, or Italy who want to display their heritage or enthusiasm on their vehicle.

• Drivers looking for a simple, affordable upgrade to replace worn-out or basic plastic valve caps.

• Anyone who wants to protect their tire valves from dirt, moisture, and air leaks for better tire maintenance.

Usage Scenario

Mark had just finished washing his black sedan and noticed the old plastic valve caps were cracked and faded. He wanted a small detail that would make his car stand out at the next local car meet. He found this set of aluminum valve caps with the Italian flag emblem. He screwed them on in under a minute. Now, every time he walks up to his car, the subtle touch of red, white, and green on each wheel gives him a sense of pride and a unique look that sparks conversations with other enthusiasts.

Micro Comparison

While standard plastic caps are cheap, they can crack, fade, and allow moisture to reach the valve core. These aluminum caps are much more durable and provide a better seal against the elements. The engraved flag emblems also offer a level of personalization that plain metal or black caps simply cannot match, making them a more stylish and functional choice for the same simple installation.

Specifications

- Material: Aluminum

• Color: As photos (Germany, France, Italy flag emblems)

• Size: Universal fit for any car tires

Package Includes

- 4 x Aluminum Tire Valve Caps (with Germany, France, Italy flag emblems)

Why You Will Love It

These valve caps are a small, affordable detail that makes a big visual impact on your vehicle. You will love how easy they are to install and how they instantly give your wheels a cleaner, more customized look. Plus, knowing they are protecting your tire valves from the elements gives you peace of mind every time you drive.

Questions and Answers

Question: Will these fit my motorcycle?

Answer: Yes, they are universal and fit all standard tire valves, including motorcycles.

Question: Do these caps prevent air from leaking out?

Answer: Yes, they seal the valve stem to help prevent air leaks and maintain tire pressure.

Question: How do I install them?

Answer: Simply unscrew your old valve caps and screw these new ones on by hand. No tools are needed.

Question: Are these caps made of metal or plastic?

Answer: They are made of high-quality aluminum, which is more durable than plastic.

Question: Which flags are on these caps?

Answer: The set includes emblems for Germany, France, and Italy.

Show your national pride while protecting your tires with these 4 American flag car valve stem caps. Made from durable aluminum alloy, they shield your tire valves from dirt, dust, and moisture, helping prevent air leaks and extending tire life. This universal set fits most cars, SUVs, trucks, motorcycles, and bicycles.

These valve stem caps are designed with a simple screw-on installation that takes just a few minutes and requires no tools. The decorative American flag pattern adds a patriotic touch to your wheels while making the caps easy to grip and turn when you need to check your air pressure.

Each cap includes a rubber O-ring seal that helps lock out water, sand, and road grime. This proactive protection keeps your valve stems clean and functioning properly, contributing to a more reliable and secure driving experience. Whether you are driving across town or across the country, these caps offer a small but meaningful upgrade for your vehicle.

With a pack of four, you have exactly what you need for a standard car or truck. The universal size means they work on a wide range of vehicles, making them a practical choice for anyone who wants to combine style with function.

Key Features and Benefits

- Durable aluminum alloy construction that resists weather and corrosion, protecting your valve stems for the long term.

• Built-in rubber O-ring seal that blocks dirt, water, and dust from entering the valve, helping prevent slow air leaks.

• Universal fit design that works on most cars, SUVs, trucks, motorcycles, and bicycles, offering versatile use across your vehicles.

• Easy hand-tighten installation that requires no tools, letting you swap them on in just a few minutes.

• Patriotic American flag design that adds a personal style statement to your wheels while keeping caps easy to grip.

Who Is This For

- Car owners who want to add a simple patriotic accent to their daily driver or weekend cruiser.

• Truck and SUV drivers looking for durable valve caps that can handle tough road conditions and weather exposure.

• Motorcycle and bicycle riders who want a lightweight, secure cap that fits standard valve stems without adding bulk.

• Anyone replacing lost or worn-out valve caps who wants a reliable, weather-resistant upgrade with a clean look.

Usage Scenario

Mark had been driving with mismatched plastic valve caps on his pickup for months. One fell off during a highway trip, and he noticed his tire pressure dropping more often than usual. He picked up this set of four American flag aluminum caps, twisted them on in under two minutes, and immediately felt more confident. The snug fit and rubber seal kept his valves clean through rain and gravel roads, and the flag design gave his truck a subtle custom touch that neighbors noticed.

Micro Comparison

Basic plastic valve caps can crack in the sun and let moisture into your valve stem over time. These aluminum alloy caps with rubber O-rings offer better long-term protection against dirt and weather. The American flag design also makes them easier to grip and tighten by hand compared to plain smooth caps, so you can quickly remove them when checking tire pressure.

Specifications

- Material: Aluminum alloy + O rubber seal

• Quantity: 4 pieces per pack

• Fit: Universal size for cars, SUVs, trucks, motorcycles, bicycles

Package Includes

- 4 x Tire valve dust caps

Why You Will Love It

These valve caps let you express your American pride in a small but visible way every time you walk up to your car. They are built to last longer than standard plastic caps and help keep your tires properly sealed, which means fewer trips to the air pump. It is a simple, affordable upgrade that adds both style and practical protection to any vehicle.

Questions and Answers

Question: Will these caps fit my standard car tires?

Answer: Yes, they are a universal size that fits most cars, SUVs, trucks, motorcycles, and bicycles with standard valve stems.

Question: Do these caps help prevent air leaks?

Answer: Yes, the rubber O-ring seal helps block dirt and moisture from entering the valve, which can reduce the risk of slow air leaks.

Question: Are these caps weather resistant?

Answer: Yes, the aluminum alloy material is durable and weather-resistant, protecting against rain, sun, and road grime.

Question: How do I install them?

Answer: Simply unscrew your old caps and screw these on by hand. No tools are needed, and it takes just a few minutes.

Question: Can I use these on a motorcycle or bicycle?

Answer: Yes, the universal size fits standard valve stems on motorcycles and bicycles as well as cars and trucks.