X-PROG 3 Key Programmer Tool for X431 V PRO3S+ PAD V

Key Features

• EEPROM and MCU Chips — It reads and writes EEPROM and on-board MCU chips, along with BMW CAS4+/FEM chips and Mercedes-Benz infrared keys, and can generate special keys.
• Key Matching and Chips — It handles remote control matching, key chip reading and matching, and anti-theft password reading, plus anti-theft component replacement.
• Key and ECU Functions — It combines key matching and copying, anti-theft IC reading and writing, and ECU reading and writing in one tool.
• X-431 Scanner Use — It works with X-431 series diagnostic scanners, including the X431 V, X431 PRO3S+ and X-431 PAD V.

Product Specifications

• Voltage: DC12V
• Working CurrentMax: 500mA
• Power Consumption: 5W
• Storage Temperature: -20℃~70℃
• Working Temperature: 0℃~50℃
• 2. Supported brands: For VW, For AUDI, For SKODA, For SEAT, For BMW, For MERCEDES-BENZ, For TOYOTA, etc. More models continue to be updated.
• 3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
• Method 1: use main cable to connect car OBD2 16pin interface, and X-PROG3,with LAUNCH X431 Tablet to do key matching, data reading and writing, etc.
• Method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the anti-theft matching programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host
• Method 3: After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the anti-theft programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host

What It Is / How It Works

This X-PROG 3 is an immobilizer and key programmer tool. Tools in this category connect to a vehicle's diagnostic port or to a bench setup and read or write data on anti-theft chips, keys and control units. This one is built for that job, with slots and sockets for several chip and key types.

Who It's For / Use Cases

Immobilizer and key programmer tools suit automotive locksmiths, key cutting shops and independent repair technicians who work on vehicle anti-theft systems. They are for people who need to match keys, copy key chips or read and write control unit data as part of their daily work.

How to Use / Care

1. Connect the main diagnostic cable to the car's OBD2 16-pin interface.
2. Connect X-PROG 3 with the LAUNCH X431 tablet to carry out key matching, data reading and writing.
3. Place the car key in the car key slot to perform the key matching function.
4. Place the Mercedes-Benz infrared key in the Mercedes-Benz key infrared slot to perform the key matching function.
5. Place the key chip in the car key chip hole to perform key matching.
6. Place the EEPROM or MCU chip in the locker install chip burning socket to complete data read and write operations.

How to Choose

Start with the chip or key type you need to work on, then check that it appears in the slots and sockets described in How to Use. Confirm that your diagnostic scanner is one of the X-431 series listed in the Key Features. If your work centers on a particular brand, compare the supported brands listed in the FAQ with the vehicles you service.

Frequently Asked Questions

Which diagnostic scanners does it work with?
It is compatible with X-431 series diagnostic scanners, including the X431 V, X431 PRO3S+ and X-431 PAD V.

Which vehicle brands does it support?
It supports VW, Audi, Skoda, SEAT, BMW, Mercedes-Benz and Toyota, among others. More models continue to be added.

What types of chips can it read and write?
It reads and writes EEPROM and on-board MCU chips and supports BMW CAS4+/FEM chips and Mercedes-Benz infrared keys.

What power does it need?
It takes a DC12V input and has a power consumption of 5W, with a working current max of 500mA.

What temperature range can it work in?
Its working temperature is 0℃~50℃, and its storage temperature is -20℃~70℃.