This rear wiper blade and arm assembly is a direct replacement for the BMW X5 E70 models built between 2007 and 2013. It provides a clear view through the back windshield by restoring full contact and wiping performance.

Made from durable plastic, this wiper unit is designed to match the original factory fit and function. It replaces OEM part numbers 61627161029, 61627206357, and 42745, ensuring a simple swap without modifications.

Over time, rear wiper arms can wear out or become stiff, leaving streaks and blind spots. This replacement assembly brings back reliable wiping action, helping you maintain safe rear visibility in rain, snow, or road spray.

The complete design includes both the blade and the arm, making installation straightforward. You get the full assembly needed for the rear windshield in one package.

Key Features and Benefits

- Direct fit for BMW X5 E70 2007-2013 that eliminates the need for adapters or modifications

• Complete blade and arm assembly that replaces worn factory parts in one step

• Plastic construction that resists rust and corrosion for longer service life

• Restored rear windshield wiping that improves visibility and driving safety

• Replaces OEM numbers 61627161029, 61627206357, and 42745 for guaranteed compatibility

Who Is This For

- BMW X5 E70 owners from 2007 to 2013 needing a rear wiper replacement

• Drivers experiencing streaking, skipping, or incomplete rear windshield wiping

• DIY car owners looking for a direct-fit rear wiper arm and blade assembly

• Anyone restoring rear visibility on an X5 E70 before winter or rainy season

Usage Scenario

Mark noticed his 2011 X5 E70 had a rear wiper that left a wide streak right across the center of the glass. Every time it rained, he had to rely on his side mirrors more than he wanted. He ordered this replacement assembly, removed the old arm, and installed the new one in about ten minutes. Now the back windshield clears completely with every swipe, and he drives with more confidence in wet weather.

Micro Comparison

Some universal rear wipers need extra adapters or may not sit flush against the glass, causing uneven pressure. This assembly is molded specifically for the X5 E70 rear hatch contour, so the blade applies even contact across the full arc. You get a factory-like fit without guessing which adapter to use.

Specifications

- Material: Plastic

• Placement: REAR

• Compatible Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013

• OEM Numbers: 61627161029, 61627206357, 42745

Package Includes

- 1 x Rear Wiper Blade and Arm Assembly

Why You Will Love It

You get a complete rear wiper solution that fits your X5 E70 without extra parts or guesswork. It brings back the clean sweep you expect from a properly working wiper, so you can focus on the road ahead. One simple installation gives you years of reliable rear visibility.

Questions and Answers

Question: Will this fit my 2009 BMW X5 E70?

Answer: Yes, this rear wiper assembly is designed for BMW X5 E70 models from 2007 to 2013, including the 2009 model year.

Question: Is this just the blade or the arm too?

Answer: This is a complete assembly that includes both the rear wiper blade and the wiper arm.

Question: Do I need any special tools to install it?

Answer: No special tools are required. The arm attaches directly to the wiper spindle using the standard factory connection.

Question: What OEM part numbers does this replace?

Answer: This assembly replaces OEM numbers 61627161029, 61627206357, and 42745.

Question: Is the material metal or plastic?

Answer: The wiper arm and blade assembly is made from plastic.

Keep your rear window clear and safe with a wiper kit designed specifically for your Toyota Yaris. This Xukey set includes both the wiper arm and blade, giving you a complete rear window solution for Japan-built models from 1999 to 2005.

This kit is a direct replacement for your worn-out rear wiper. It comes as a complete set, so you do not need to buy separate parts. The high-grade natural rubber blade is built to handle tough weather, from hot summers to freezing winters, without leaving streaks or making noise.

Installation is straightforward. The custom-fit design means it bolts right onto your Yaris without modifications. Once installed, you will notice a cleaner wipe and better visibility through your rear window, especially during rain or snow.

Built with an aerodynamic shape, this wiper reduces drag and wind lift at higher speeds. The three-section design applies even pressure along the entire blade, so you get a smooth, chatter-free wipe every time. It also resists ice and snow buildup, which is common with metal or plastic wiper frames.

Key Features and Benefits

- Custom-fit design that directly replaces your old rear wiper arm and blade on Toyota Yaris Japan built 1999-2005

• High-grade natural rubber blade delivers a smooth, clean, and chatter-free wipe

• Aerodynamic shape reduces wind drag, noise, and lift for stable performance at higher speeds

• Three-section wiper design applies even pressure along the full blade length for consistent contact

• Temperature tolerance from -40F to +158F (-40C to +70C) so it works in extreme heat and cold

• Resists ice and snow buildup because there are no exposed metal or plastic components

• Tension memory technology keeps the blade pressing evenly against the glass over time

Who Is This For

- Owners of a Toyota Yaris MK1 built in Japan between 1999 and 2005 who need a rear wiper replacement

• Drivers who want a complete arm and blade kit instead of buying each part separately

• Anyone looking for a durable wiper that performs well in both hot and freezing weather conditions

• Car owners who value a quiet, streak-free rear window wipe without constant adjustment

Usage Scenario

Mark drives his 2002 Toyota Yaris through all four seasons. Last winter, his old rear wiper started leaving streaks and making a loud chattering noise. After installing this Xukey kit, his rear window stayed clear during a heavy snowfall. The blade did not freeze up, and he could see clearly while backing out of his driveway. Now, even in summer rain, the wipe is silent and clean.

Micro Comparison

Unlike universal wiper arms that may not fit correctly or require adapters, this Xukey kit is made specifically for the Toyota Yaris Japan built 1999-2005. It comes as a complete arm and blade set, so you do not need to guess which parts are compatible. The high-grade rubber and aerodynamic design also give you better durability and quieter operation compared to basic replacement blades that wear out faster.

Specifications

Material: High Grade Natural Rubber

Placement: REAR

Year: 1999-2005

Temperature Tolerance: +158F to -40F (+70C to -40C)

Composition: 1PC Rear Wiper Arm + 1PC Wiper Blade

Condition: 100% Brand New Unused (Quality Checked before shipping)

Package Includes

- 1 x Rear Wiper Arm

• 1 x Wiper Blade

Why You Will Love It

You will love how easy it is to restore clear rear visibility on your Yaris without hunting for separate parts. This kit gives you a direct fit that installs quickly and works reliably in any weather. It is a simple upgrade that makes daily driving safer and more comfortable.

Questions and Answers

Question: Will this fit my Toyota Yaris 2001 Japan built?

Answer: Yes, this kit fits Toyota Yaris MK1 models built in Japan from 1999 to 2005, including the 2001 model year.

Question: Does this kit include both the arm and the blade?

Answer: Yes, it comes with one rear wiper arm and one wiper blade as a complete set.

Question: Is the rubber blade good for very cold weather?

Answer: Yes, the high-grade natural rubber is rated for temperatures as low as -40F (-40C) and up to +158F (+70C).

Question: Do I need any special tools to install this?

Answer: No special tools are required. It is a direct replacement that bolts on to your existing mounting point.

Question: Will this wiper make noise on my rear window?

Answer: The aerodynamic design and even pressure application help reduce noise and chattering for a quiet wipe.

Question: Is this product made for the front or rear of the car?

Answer: This kit is specifically designed for the rear window placement of your Toyota Yaris.

Question: How long does the blade typically last?

Answer: Blade life depends on usage and weather conditions, but the high-grade rubber is built for durability in extreme temperatures.

Keep your rear view clear and safe with a dedicated 12-inch wiper blade designed specifically for the Renault Twingo I MK1. This replacement wiper blade ensures your tailgate window stays clean, offering reliable performance for vehicles manufactured between 1993 and 2007.

Driving in rain or snow can quickly obscure your rear window, making it hard to see traffic behind you. A worn or damaged rear wiper blade can leave streaks and missed spots. This product is a straightforward solution to restore full visibility, helping you drive with more confidence in all weather conditions.

This wiper blade is a direct replacement for the rear windshield of your Twingo. It is constructed using high-grade natural rubber, a material chosen for its durability and effective wiping action. The blade is designed to hug the curve of your tailgate window, removing rain, snow, and dirt in a single, clean sweep.

Installation is simple and tool-free, allowing you to replace your old, ineffective blade in minutes. It comes as a brand new, quality-checked unit, ready to be fitted. Restore the performance of your rear wiper system and enjoy a consistently clear view behind your car.

Key Features and Benefits

- High-grade natural rubber construction that provides maximum performance and long-lasting durability against the elements.

• 12-inch length specifically designed for the rear tailgate window of the Renault Twingo I MK1.

• 100% brand new and quality checked before shipping to ensure reliable operation right out of the package.

• Tool-free installation that allows for a quick and easy replacement of your old wiper blade.

Who Is This For

- Owners of a Renault Twingo I MK1 (1993-2007) needing a direct-fit rear wiper replacement.

• Drivers who want to improve rear visibility during rain, snow, or muddy conditions.

• Anyone looking for a simple, affordable maintenance part to keep their vehicle safe and road-legal.

Usage Scenario

Marie drives her 2001 Twingo through the rainy streets of Lyon every day. Last week, her old rear wiper blade started leaving a thick, blurry streak right across the middle of her back window, making it hard to check her blind spot. She ordered this replacement blade, popped it on in under a minute, and now her rear view is crystal clear again. She feels much safer changing lanes in traffic.

Micro Comparison

Unlike universal blades that may not fit the specific curvature of the Twingo I's tailgate window, this blade is designed for your exact model. Its high-grade natural rubber provides a more consistent wipe compared to cheaper synthetic alternatives, reducing streaks and chatter for a quieter, more effective clean.

Specifications

- Material: High Grade Natural Rubber

• Length: 12 inches

• Placement: Rear

• Composition: Rear wiper blade ONLY

Package Includes

- 1 x Rear Wiper Blade

Why You Will Love It

You will love how this simple swap instantly clears up your rear view, making every drive safer and less stressful. It is a low-cost, high-impact fix that keeps your classic Twingo in top working order.

Questions and Answers

Question: Is this wiper blade for the front or rear window?

Answer: It is specifically designed for the rear tailgate window.

Question: Will this fit my Renault Twingo I from 1995?

Answer: Yes, it fits the Twingo I MK1 models produced from 1993 to 2007.

Question: Does this come with the wiper arm, or just the blade?

Answer: It is the rear wiper blade only. The wiper arm is not included.

Question: Is the rubber good quality for heavy rain?

Answer: It is made from high-grade natural rubber designed for maximum performance and durability in wet conditions.

Question: Is it easy to install myself?

Answer: Yes, installation is simple and requires no tools, allowing for a quick replacement.

Replace your worn-out rear wiper with a complete blade and arm set designed specifically for the Toyota 4Runner MK4 2003-2009. This 12-inch kit provides a direct, custom fit for your tailgate window, ensuring clear visibility in rain, snow, and mud without the hassle of mixing and matching parts.

This rear wiper assembly is built to handle tough conditions. The high-grade natural rubber blade delivers a smooth, chatter-free wipe, while the tension memory design applies even pressure across the entire blade length. It is engineered to resist ice and snow buildup, making it a reliable choice for year-round driving.

The aerodynamic arm and blade profile reduces drag and wind lift at highway speeds. Each unit is 100% brand new and quality checked before shipping, so you can install it with confidence. The set includes both the wiper arm and the blade, giving you everything needed for a complete rear window replacement.

Installation is straightforward as a direct swap for the original equipment. Please note that this item does not come with a manual installation guide. If you are looking for a dependable, no-compromise rear wiper solution for your 4Runner, this kit offers the fit and function you need.

Key Features and Benefits

- Custom-fit design that serves as a direct replacement for the original rear wiper arm and blade on Toyota 4Runner MK4 2003-2009

• High-grade natural rubber blade that provides a smooth, quiet, and chatter-free wipe

• Tension memory technology that applies even pressure along the entire blade length for consistent contact

• Aerodynamic profile that reduces drag, noise, and wind lift during highway driving

• Resistant construction that helps prevent ice and snow buildup on exposed components

• Temperature tolerance from -40C to +70C (-40F to +158F) for reliable performance in extreme weather

Who Is This For

- Toyota 4Runner owners with a 2003-2009 MK4 model who need a complete rear wiper replacement

• Drivers who want a ready-to-install kit that includes both the wiper arm and the blade

• Vehicle owners looking for a durable wiper that can handle snow, ice, and heavy rain without chattering

• DIY enthusiasts seeking a direct factory-style fit without modifying existing mounting points

Usage Scenario

Mark noticed his 2006 4Runner's rear wiper was leaving streaks and skipping across the glass during a heavy spring rain. He ordered this complete arm and blade set, swapped out the old assembly in under ten minutes, and immediately saw a clean, streak-free view through his tailgate window. The new wiper stayed quiet even at highway speed, and when the first winter storm hit, the blade did not freeze to the glass like his old one did.

Micro Comparison

Unlike universal wiper adapters that require extra clips or may not fit the 4Runner's rear arm mount securely, this kit is made specifically for the 2003-2009 MK4 model. It includes both the arm and the blade, so there is no need to buy separate parts or worry about compatibility. The high-grade rubber and tension memory system give it a longer effective life compared to basic economy blades that tend to harden or lose contact over time.

Specifications

- Size: 12 inches

• Material: Plastic arm, high-grade natural rubber blade

• Composition: Rear wiper arm and blade set

• Fitment: Toyota 4Runner MK4 2003-2009

• OEM Number: 85241-35031 / 8524135031

• Temperature Tolerance: -40C to +70C (-40F to +158F)

• Wiping Durability: 1 million cycles tested

• Condition: 100% brand new, quality checked before shipping

Package Includes

- 1 x Rear wiper arm

• 1 x Rear wiper blade (12 inch)

Why You Will Love It

You will appreciate how this kit simplifies your maintenance routine by giving you a single, matched set that fits perfectly out of the box. The quiet, streak-free wiping performance means you can keep your rear view clear without distraction, whether you are backing up in a downpour or clearing slush off the tailgate.

Questions and Answers

Question: Will this fit my 2005 Toyota 4Runner?

Answer: Yes, this kit is designed for the Toyota 4Runner MK4 from 2003 to 2009, including the 2005 model year.

Question: Does this include both the wiper arm and the blade?

Answer: Yes, the set includes the rear wiper arm and the 12-inch blade together.

Question: Is installation difficult?

Answer: Installation is a direct swap for the original arm and blade. No manual is included, but most users complete the replacement in about 10 minutes.

Question: Does this wiper work well in winter and snow?

Answer: Yes, the blade is designed to resist ice and snow buildup and is rated for temperatures down to -40C (-40F).

Question: What is the OEM part number for this wiper set?

Answer: The OEM reference number is 85241-35031 / 8524135031.

Upgrade your Renault Grand Scenic or Scenic II with this custom-fit wiper blade set. Designed for a direct replacement of your old wipers, it delivers a smooth, clean, and chatter-free wipe every time. The set includes two front blades sized 26 inches and 21 inches.

Each blade is built with high-grade natural rubber to ensure maximum performance and durability. The specially blended rubber compound works in a wide range of weather conditions, from extreme heat to freezing cold. The aerodynamic design helps reduce drag, wind lift, and noise while driving.

A unique three-section design applies even pressure along the entire length of the blade. This tension memory system ensures consistent contact with the windshield for a streak-free result. The blades also prevent ice and snow buildup, making them a reliable choice for winter driving.

These wiper blades are a direct fit for specific Renault models. Before purchasing, please confirm your vehicle's wiper arm type to ensure compatibility. The blades are not designed for bayonet-type wiper arms.

Key Features and Benefits

- Custom fit for Renault Grand Scenic and Scenic II models that ensures a direct replacement of old wipers

• High-grade natural rubber construction that delivers maximum performance and long-lasting durability

• Aerodynamic design that reduces drag, wind lift, and noise during use

• Unique three-section design with tension memory that applies even pressure for a streak-free clean

• Temperature tolerance from +158F to -40F (+70C to -40C) that performs reliably in extreme weather

Who Is This For

- Owners of a Renault Grand Scenic MK2 or Scenic II MK2 with production dates from 2003 to November 2004

• Drivers looking for a direct replacement wiper blade set without needing adapters or modifications

• Anyone who wants a quieter, smoother wiping experience with less wind noise at highway speeds

• Drivers in regions with harsh winters who need blades that resist ice and snow buildup

Usage Scenario

Sarah was driving her Renault Grand Scenic through a heavy rainstorm when her old wipers started leaving streaks across the windshield. The noise was distracting, and she could barely see the road ahead. She ordered this wiper blade set and installed it the next morning. On her way to work, the rain returned, but this time the windshield stayed crystal clear, and the only sound was the gentle rhythm of the blades moving across the glass.

Micro Comparison

Unlike universal wiper blades that often require adapters or leave gaps along the windshield, this set is custom-sized for your Renault Grand Scenic or Scenic II. The high-grade natural rubber and tension memory design provide consistent pressure across the entire blade, reducing streaks and extending the life of the wiper compared to standard rubber blades that wear unevenly.

Specifications

- Material: High Grade Natural Rubber

• Placement: Front

• Composition: 2 Pieces Front Wiper Blades

• Size: 26 inches + 21 inches

• Temperature Tolerance: +158F to -40F (+70C to -40C)

Package Includes

- 1 x 26 inch Front Wiper Blade

• 1 x 21 inch Front Wiper Blade

Why You Will Love It

You will appreciate the quiet, streak-free wiping that makes driving in rain less stressful. The blades are built to last through changing seasons, so you can install them and forget about them. Plus, the custom fit means no fiddling with adapters or worrying about compatibility.

Questions and Answers

Question: Will these wiper blades fit my 2004 Renault Grand Scenic?

Answer: Yes, these blades fit the Renault Grand Scenic MK2 and Scenic II MK2 from 2003 to November 2004.

Question: Do these blades come with installation instructions?

Answer: No, this item does not come with a manual installation guide.

Question: Are these wiper blades suitable for winter use?

Answer: Yes, the blades are designed to prevent ice and snow buildup and work in temperatures as low as -40F.

Question: What is the size of each blade in the set?

Answer: The set includes one 26 inch blade and one 21 inch blade for the front windshield.

Question: Will these wipers work on a bayonet-type wiper arm?

Answer: No, these blades are not designed to fit bayonet-type wiper arms. Please check your wiper arm type before ordering.

Restore clear rear visibility on your Chevrolet Spark with a direct replacement rear windshield wiper arm assembly. This kit includes the arm, cover, and blade, designed to fit models from 2011 to 2017.

A worn or damaged rear wiper arm can leave streaks and reduce your view of the road. This replacement assembly is built to handle rain and snow on the back glass, helping you drive with more confidence in any weather. The structured PBT arm and integrated blade work together for consistent contact with the glass surface.

This kit is a practical solution for when your current wiper arm is cracked, loose, missing, or wiping unevenly. It comes as a complete set with the arm, cover, and blade, so you have everything needed for a full replacement. Professional installation is recommended to ensure proper fit and function.

Designed for a direct replacement on compatible Chevrolet Spark models, this wiper arm assembly matches OE part numbers 95995875, 96688389, and A0064A0005. Always verify your vehicle's specific model year and existing part number before purchasing to confirm compatibility.

Key Features and Benefits

- Complete replacement assembly that includes the arm, cover, and blade for a straightforward rear wiper swap

• PBT construction that provides a durable structure designed to withstand weather exposure

• Direct fit design that helps the blade maintain consistent contact with the rear glass for a cleaner wipe

• Compatible with multiple model years to simplify finding the right part for your Spark or Spark EV

• Replaces worn or damaged factory arms to restore proper rear visibility in rain and snow

Who Is This For

- Chevrolet Spark owners with a cracked, loose, or missing rear wiper arm from 2011-2017 models

• Chevrolet Spark EV drivers looking for a rear wiper replacement for 2014-2016 model years

• DIY car owners who want a complete arm-and-blade kit for a single-step replacement

• Drivers who need a reliable rear wiper solution before winter or rainy seasons

Usage Scenario

Lisa noticed her 2014 Chevrolet Spark's rear wiper was leaving a wide streak across the back window every time it rained. The arm felt loose and the blade lifted off the glass on one side. She ordered this replacement kit, and after having a local shop install it, the rear window stayed clear during her morning commute through a heavy downpour. The new arm held the blade firmly against the glass, giving her a full view of traffic behind her.

Micro Comparison

This kit provides a complete rear wiper arm and blade assembly rather than just a refill blade. Replacing the entire arm ensures the spring tension and alignment are restored, which a blade-only swap cannot fix if the arm itself is worn. It is a direct-fit option for specific Chevrolet Spark and Spark EV years, making it easier to match your vehicle without modifications.

Specifications

- Material: PBT

• Color: Black

• Placement On Vehicle: Rear

• Part Numbers: 95995875, 96688389, A0064A0005

• Compatible with Chevrolet Spark 2013-2015

• Compatible with Chevrolet Spark EV 2014-2016

Package Includes

- 1 Set x Rear Windshield Wiper Arm With Cover and Wiper Blade

Why You Will Love It

You will appreciate the convenience of a complete kit that includes the arm, cover, and blade in one package. It saves you the trouble of hunting for separate components. Knowing you have a direct-fit replacement means less time checking compatibility and more time driving with a clear rear view.

Questions and Answers

Question: Will this fit my 2012 Chevrolet Spark?

Answer: This kit is listed as compatible with Chevrolet Spark models from 2011 to 2017, so it should fit your 2012 Spark. We recommend checking your existing part number to confirm.

Question: Is this a complete set or just the arm?

Answer: This is a complete set that includes the rear wiper arm, the cover, and the wiper blade.

Question: Do I need to buy a separate blade for this arm?

Answer: No, a blade is included with this arm assembly. You do not need to purchase a separate blade.

Question: Can I install this myself?

Answer: Professional installation is recommended to ensure the arm fits the motor shaft correctly and the blade contacts the glass evenly.

Question: How do I know if this matches my car's part?

Answer: Check the original part number on your current wiper arm. This kit matches OE numbers 95995875, 96688389, and A0064A0005.

Question: Will this work on a Chevrolet Spark EV?

Answer: Yes, this kit is compatible with Chevrolet Spark EV models from 2014 to 2016.

Upgrade your car's visibility and safety with these universal soft double layer rubber wiper blades. Designed for a frameless and bracketless fit, they provide a clean, streak-free wipe on your windscreen window. This set offers a simple solution for a clearer drive in any weather.

These wiper blades use a dual rubber strip design that delivers a longer lasting and cleaner wipe compared to standard single-blade options. The soft rubber conforms to the curvature of your windshield, ensuring consistent contact and removing rain, snow, and debris effectively. The frameless design reduces wind lift at high speeds, keeping the blade firmly pressed against the glass.

Installation is straightforward with the universal fit, and these wipers are suitable for 99.99% of car models, including both left-hand drive and right-hand drive vehicles. You just need to select the correct wiper interface and length for your car. This makes them a practical and reliable choice for drivers who want a hassle-free upgrade.

Made with a blade of AA level ABSP rubber, these wipers are built to last. The double rubber strip technology not only cleans more thoroughly but also extends the lifespan of the wiper, giving you better performance for more miles. Enjoy a clearer view and a safer driving experience with this simple yet effective car accessory.

Key Features and Benefits

- Double layer rubber design that provides a longer lasting and cleaner wipe for improved visibility.

• Frameless and bracketless construction that reduces wind lift and ensures consistent contact at high speeds.

• Universal fit that works with 99.99% of car models, including left-hand and right-hand drive vehicles.

• Soft rubber blade material that conforms to your windshield's curve for a streak-free clean.

• Easy installation process with a simple connection to your wiper arm.

Who Is This For

- Car owners looking for a direct replacement for their worn-out or streaky wiper blades.

• Drivers who want a frameless, modern look for their vehicle's windshield.

• Anyone seeking a cost-effective and reliable wiper blade for daily driving in rain or snow.

• Owners of a wide range of vehicles, from sedans and SUVs to trucks, needing a universal solution.

Usage Scenario

It was a rainy evening commute, and your old wipers were smearing water across the windshield, making it hard to see the taillights ahead. You pull over and swap them out for these new double-layer rubber blades. As you drive away, the first swipe clears the glass completely, leaving no streaks or smudges. The view is instantly clearer, and you feel safer navigating the wet roads home.

Micro Comparison

Many standard wiper blades use a single rubber strip that can wear down quickly and leave streaks. These wipers feature a double rubber strip, which cleans more effectively and lasts longer. While some premium blades are model-specific and expensive, this universal frameless design offers a great balance of performance, durability, and value for most vehicles.

Specifications

Material: Blade is ABSP Rubber, AA level

Placement: FRONT

Special Features: Dual Rubber

Size Guide

Available sizes: 14"=350mm, 15"=375mm, 16"=400mm, 17"=425mm, 18"=450mm, 19"=475mm, 20"=500mm, 21"=525mm, 22"=550mm, 24"=600mm, 26"=650mm, 27"=675mm, 28"=700mm. Please select the correct wiper interface and length for your vehicle.

Package Includes

- 1 x Car Windshield Wiper Blade

Why You Will Love It

You will love the confidence of a crystal-clear windshield every time it rains. This simple upgrade makes your daily drive safer and more comfortable. It is a small change that delivers a big improvement in visibility and peace of mind.

Questions and Answers

Question: Will these wiper blades fit my car?

Answer: These wipers are designed to fit 99.99% of car models. You just need to choose the correct wiper interface and length for your specific vehicle.

Question: Are these wipers for the front or rear windshield?

Answer: These wiper blades are designed for placement on the FRONT windshield.

Question: What is the benefit of the double rubber strip?

Answer: The double rubber strip provides a longer lasting and cleaner wipe compared to standard single-blade wipers.

Question: What sizes are available for this wiper blade?

Answer: Available sizes include 14", 15", 16", 17", 18", 19", 20", 21", 22", 24", 26", 27", and 28".

Question: Do these wipers work on both left-hand and right-hand drive cars?

Answer: Yes, these wipers are suitable for all models, including both left-hand drive and right-hand drive vehicles.

Keep your rear window clear and your driving safe with a direct replacement rear wiper blade designed for the VW Golf 8. This custom-fit blade restores full visibility to your tailgate window, making it easy to drive in rain, snow, or slush.

This wiper blade is made from high-grade natural rubber and built to handle extreme temperatures from -40F to +158F. It delivers a smooth, clean wipe every time without the annoying chatter or streaks that come with worn-out blades. The design prevents ice and snow from building up on the blade, giving you reliable performance through all four seasons.

Installation is straightforward. This is a direct replacement for the original rear wiper on your Golf 8 hatchback. Just remove the old blade and clip the new one in place. The blade uses tension memory technology to apply even pressure along the entire length, so you get consistent contact with the glass for a spotless wipe.

With a tested lifespan of over one million wipes, this blade is built to last. It is a simple upgrade that makes a real difference in your daily drive.

Key Features and Benefits

- Custom fit for VW Golf 8 hatchback that makes it a direct replacement for your old rear wiper blade

• High-grade natural rubber construction that delivers a smooth, clean, and chatter-free wipe

• Temperature tolerance from -40F to +158F that ensures reliable performance in extreme heat and freezing cold

• Tension memory technology that applies even pressure along the entire blade for consistent contact with the glass

• Design that prevents ice and snow build-up on metal or plastic components for winter driving reliability

• Tested for over one million wipes that provides long-lasting durability and value

Who Is This For

- VW Golf 8 hatchback owners from model years 2019 to 2025 looking for a direct replacement rear wiper

• Drivers who want a simple DIY upgrade to restore clear visibility through their rear window

• Anyone living in areas with heavy rain, snow, or extreme temperature swings who needs a durable wiper blade

• Car owners who prefer a clean, streak-free wipe without the noise of a worn-out blade

Usage Scenario

Mike drives his 2021 VW Golf 8 through a rainy Pacific Northwest winter. The old rear wiper had started leaving streaks across the tailgate window, making it hard to see cars behind him. He swapped in this replacement blade in under two minutes. The next morning, driving through a steady downpour, the rear window stayed crystal clear. No chatter, no streaks, just a clean wipe every time the blade passed across the glass.

Micro Comparison

Many universal wiper blades do not fit the curved glass of the Golf 8 rear window properly, leaving gaps and streaks. This blade is custom-molded for the exact shape of your tailgate glass. The high-grade natural rubber and tension memory design give you a smoother, quieter wipe than standard blades that use cheaper materials and lose tension over time.

Specifications

- Material: High Grade Natural Rubber

• Placement: REAR

• Composition: Rear Wiper Blade Only

• Condition: 100% Brand New Unused

• Temperature Tolerance: +158F to -40F (+70C to -40C)

• Wiping Tested: 1 Million Times

Package Includes

- 1 x Rear Wiper Blade

Why You Will Love It

You will love the peace of mind that comes from a clear rear view in any weather. This blade is a simple, affordable upgrade that takes just minutes to install and instantly improves your driving safety. It is built tough enough to handle snow, rain, and sun without wearing out quickly.

Questions and Answers

Question: Will this wiper blade fit my 2022 VW Golf 8 hatchback?

Answer: Yes, this blade is designed for the VW Golf 8 hatchback models from 2019 to 2025.

Question: Is this just the rubber insert or the whole blade assembly?

Answer: This is the complete rear wiper blade assembly, ready to install as a direct replacement.

Question: How do I install this wiper blade?

Answer: Simply remove your old rear wiper blade and clip this new one into place. No special tools are required.

Question: Will this blade work in freezing temperatures?

Answer: Yes, it is tested for temperatures as low as -40F and as high as +158F.

Question: Does this blade come with a warranty?

Answer: The product is covered by the manufacturer's standard quality guarantee. Please check the seller's return policy for specific details.

Replace your worn-out rear wiper with a direct-fit arm and blade assembly designed specifically for the Jeep Wrangler (2007-2017). This complete kit includes both the arm and blade, so you get a perfect match and clear visibility from your rear window in one step.

This rear wiper assembly is built with a durable ABS plastic arm and a high-grade natural rubber blade. The rubber is designed to resist cracking and tearing, delivering a clean, streak-free wipe every time. It is a 100% brand new part that has been quality checked before shipping to ensure reliable performance.

Installation is straightforward because this assembly matches the OEM specifications (Part Number 68002490AB). It clips directly onto your existing wiper post, saving you time and hassle. Whether you are dealing with rain, mud, or snow, this wiper restores factory-level wiping power to the back of your Jeep.

Don't let a broken or squeaky wiper arm ruin your drive. This rear wiper arm and blade combo is the practical, long-lasting solution to keep your rear glass clear and your driving safe in any weather.

Key Features and Benefits

- Complete assembly includes both the wiper arm and blade for a simple, one-piece replacement

• Made with high-grade natural rubber that provides a clean, streak-free wipe on your rear window

• Durable ABS plastic arm resists rust and corrosion for long-lasting use

• Direct fit for Jeep Wrangler models from 2007 to 2017, matching OEM part 68002490AB

• 100% brand new and quality checked before shipping to ensure reliable performance

Who Is This For

- Jeep Wrangler owners (2007-2017) whose rear wiper arm is broken, bent, or rusted

• Drivers who want a complete arm and blade replacement instead of just swapping the rubber insert

• Anyone looking for a direct OEM-fit replacement without modifying the vehicle

Usage Scenario

Mark was driving his 2012 Jeep Wrangler through a rainstorm when his old rear wiper arm snapped. He could barely see out the back window. He ordered this complete arm and blade assembly, and it arrived in two days. The install took less than five minutes, and the new wiper cleared the glass perfectly on his next trip through the mud.

Micro Comparison

Some wiper products only sell the blade, leaving you to hunt for a compatible arm. This kit gives you both parts together, so you are not mixing and matching parts that may not fit. It is built to the same specifications as the factory part (68002490AB), which means you get a reliable, tool-free fit without guesswork.

Specifications

- Material: ABS (arm), high-grade natural rubber (blade)

• OEM Number: 68002490AB

• Placement: Rear

• Composition: Rear wiper arm + wiper blade

Package Includes

- 1 x Rear wiper arm

• 1 x Wiper blade

Why You Will Love It

You get a complete, ready-to-install wiper assembly that matches your Jeep's original parts. No more struggling with broken arms or buying separate pieces. It is a simple, affordable fix that restores full rear visibility and keeps your Wrangler road-ready in any weather.

Questions and Answers

Question: Will this fit my 2010 Jeep Wrangler Unlimited?

Answer: Yes, this rear wiper arm and blade assembly fits all Jeep Wrangler models from 2007 to 2017, including the Unlimited.

Question: Does this include the wiper blade or just the arm?

Answer: It includes both the wiper arm and the wiper blade as a complete assembly.

Question: Is the arm made of metal or plastic?

Answer: The arm is made of durable ABS plastic, which resists rust and corrosion.

Question: Do I need any special tools to install this?

Answer: No, it is a direct replacement. It clips onto the existing wiper post without any special tools.

Question: Is this a genuine OEM Jeep part?

Answer: This is an aftermarket replacement that matches OEM part number 68002490AB in fit and function. It is not a genuine Mopar part but meets the original specifications.

Question: How long does the rubber blade typically last?

Answer: The high-grade natural rubber blade is designed for long-lasting performance, but lifespan depends on usage and weather conditions.

Keep your rear window clear in rain, snow, and mud with this direct replacement rear wiper blade. It fits a wide range of popular sedans, SUVs, and crossovers from Lexus, Toyota, Mitsubishi, Suzuki, Hyundai, Mazda, Jeep, Dodge, and Fiat. This wiper blade is designed to restore full visibility and safety to your rear view.

This wiper blade is made from high-grade natural rubber. It is built to deliver a smooth, clean wipe without streaks or chattering. The blade is a custom-fit replacement for your vehicle's original equipment, making installation straightforward. Each blade is 100% brand new and has been quality checked before shipping.

The blade features a unique three-section design. This applies even pressure along the entire length of the blade for a consistent clean. The rubber material is specially blended to provide a chatter-free experience. An aerodynamic design helps reduce drag, noise, and wind lift at higher speeds.

This rear wiper blade is designed to withstand extreme temperatures from -40°C to +70°C (-40°F to +158°F). It also helps prevent ice and snow from building up on the wiper arm. This makes it a reliable choice for drivers in various climates.

Key Features and Benefits

- High-grade natural rubber construction that delivers a smooth, clean, and chatter-free wipe.

• Unique three-section design that applies even pressure along the entire blade for streak-free performance.

• Aerodynamic shape that reduces drag, noise, and wind lift for quieter operation.

• Extreme temperature tolerance from -40°C to +70°C for reliable use in hot summers and cold winters.

• Prevents ice and snow build-up on the wiper components for better winter performance.

Who Is This For

- Drivers of Lexus models including LX, NX, GX, RX 270/350/450, and LM 300h.

• Owners of Toyota vehicles like the Alphard, Fortuner, Wish, and Innova.

• Drivers of Mitsubishi Colt, Endravor, Suzuki Vitara, and Hyundai Santa Fe or i40.

• Owners of Mazda 5, 6, CX-7, CX-9, CX-4, CX-5, Jeep Compass, Grand Cherokee SRT, Dodge Journey, Durango, or Fiat Freemont 500.

Usage Scenario

It was a rainy evening commute, and the old rear wiper on your Lexus RX had left a smeared mess across the glass. You could barely see the car behind you. After a quick swap with this new blade, the rear window was crystal clear. The chatter was gone, and you could change lanes with confidence again.

Micro Comparison

Unlike many universal blades that require adapters or leave gaps on curved glass, this blade is designed for a custom fit. It uses a three-section pressure system to match the curve of your rear window. This provides a more consistent clean than standard one-piece rubber blades.

Specifications

- Material: High-grade natural rubber

• Placement: Rear

• Temperature Tolerance: -40°C to +70°C (-40°F to +158°F)

• Wiping Endurance: 1 million wipes

Package Includes

- 1 x Rear Wiper Blade

Why You Will Love It

You will love the confidence of having a clear rear view in any weather. This blade installs easily and wipes silently. It is a simple, affordable fix that makes your daily drive safer and more comfortable.

Questions and Answers

Question: Will this wiper blade fit my 2015 Lexus NX 200t?

Answer: Yes, this rear wiper blade is designed to fit Lexus NX models including the 200t and 300h.

Question: Is this a complete wiper arm or just the rubber blade?

Answer: This is a complete rear wiper blade assembly that directly replaces your old one.

Question: Does this blade work in freezing temperatures?

Answer: Yes, the rubber is rated for use down to -40°C / -40°F and helps prevent ice build-up.

Question: How do I know which size rear wiper to buy for my car?

Answer: Please check your current rear wiper blade length or compare the connector shape with our product images before ordering.

Question: Is the installation difficult?

Answer: It is a direct replacement. You simply remove the old blade and clip the new one into place. No tools are needed.

Replace your worn-out hybrid wiper blades with these 2-piece rubber refills. Designed for 3-section auto wipers, they fit sizes from 14 to 26 inches and restore a clear, streak-free view. Made from A+ grade rubber treated with UV stabilizers, these refills provide a smooth, quiet wipe and long service life.

These wiper refills are a direct replacement for the rubber strip on your existing hybrid blades. The 8.5mm width fits standard 3-section wiper arms. Each pack contains 2 refills, and you can easily cut them to the exact length needed for your vehicle. They are simple to install and help reduce annoying squeaking and dragging noises.

Using high-quality rubber, these refills glide quietly across the glass and resist cracking from sun exposure. The UV stabilizers help the rubber stay flexible in different weather conditions, so you get consistent performance over time. They are a practical, cost-effective way to refresh your wipers without buying a whole new blade set.

Before installing, check that the width of your current wiper blade refill is 8.5mm to ensure a proper fit. These refills work with most hybrid and flat blade designs that use a 3-section rubber strip.

Key Features and Benefits

- A+ grade rubber material that provides a smooth, quiet wipe and resists wear

• UV stabilizers that help prevent cracking and extend the life of the refill

• Available in multiple sizes from 14 to 26 inches that can be cut to fit your exact wiper length

• Easy to install as a direct replacement for your old rubber strip

• Streak-free cleaning that gives you a clear view of the road

Who Is This For

- Drivers with hybrid or 3-section wiper blades who need a budget-friendly refill instead of a full blade replacement

• Car owners looking for a quiet, non-squeaking wiper solution for daily driving

• Anyone who wants to quickly refresh their front windshield wipers with a simple DIY installation

Usage Scenario

It had been raining all week, and Mark’s old wipers left annoying streaks right across his line of sight. Instead of buying a whole new set of blades, he ordered these rubber refills. In just a few minutes, he slid the old strip out and pushed the new one in. The next morning, his windshield was crystal clear with no squeaking or smearing.

Micro Comparison

While full wiper blade replacements can be costly and require finding the exact fit for your car, these rubber refills are a more affordable and simpler alternative. They work with your existing hybrid wiper arms and give you the same streak-free performance as a new blade. Just check the width and length, and you are ready to go.

Specifications

- Material: A+ Grade Rubber

• Color: Black

• Width: 8.5 mm

• Available Sizes: 14", 15", 16", 18", 20", 22", 24", 26" (can be cut to size)

Package Includes

- 2 x Wiper Blade Rubber Refills

Why You Will Love It

You get a simple, cost-effective way to restore your wipers without the hassle of finding a specific blade model. The quiet, smooth wipe makes rainy drives more comfortable, and the UV-treated rubber lasts longer than standard refills. It is a small upgrade that makes a big difference in visibility.

Questions and Answers

Question: Will these refills fit my car's wiper blades?

Answer: They fit most hybrid and 3-section wiper blades that use an 8.5mm wide rubber strip. Check your current blade width before ordering.

Question: Can I cut these refills to a shorter length?

Answer: Yes, you can cut them to match your exact wiper length. Use a sharp blade or scissors for a clean cut.

Question: How do I install these refills?

Answer: Slide the old rubber strip out from the end of your wiper blade. Then slide the new refill in until it is secure. It is a simple, tool-free process.

Question: Do these refills work on rear wipers?

Answer: They are designed for front windshield wipers. For rear wipers, check if your blade uses an 8.5mm wide refill.

Question: Are these refills quiet?

Answer: Yes, the A+ grade rubber is designed to reduce squeaking and dragging noise for a quieter wipe.

Restore clear rear visibility on your Peugeot 407 SW or Citroen C5 with this complete rear wiper arm and blade set. Designed as a direct replacement, this kit provides a simple solution for worn or broken rear wipers, helping you maintain a safe view behind your vehicle in rain and snow.

Product Description

Driving with a damaged rear wiper can leave you with a smeared or obstructed view, especially in bad weather. This rear wiper arm and blade set is built to replace the original equipment on your Peugeot 407 SW (2004-2015) or Citroen C5 (2001-2008). It comes as a complete unit, so you do not need to buy the arm and blade separately.

The arm and blade are made from durable PVC material, designed to handle daily use and exposure to the elements. The blade measures 30 cm / 11.8 inches, while the arm is 29 cm / 11.4 inches long, matching the factory dimensions for a proper fit. The entire assembly is finished in black to blend in with your vehicle's rear window area.

Installation is straightforward for those with basic mechanical experience, as it mounts onto an 8mm bolt. Professional installation is recommended if you are not comfortable with the process. This set is an aftermarket replacement, offering a cost-effective way to restore your rear wiper function without visiting a dealership.

Key Features and Benefits

- Complete rear wiper arm and blade assembly that provides everything needed for a full replacement

• PVC construction that offers resistance to weather and wear for longer service life

• 30 cm / 11.8 inch blade length that matches the original equipment for effective wiping coverage

• 29 cm / 11.4 inch arm length that ensures proper positioning against the rear glass

• Black finish that maintains a factory-like appearance on your vehicle

• Compatible with 8mm bolt mounting system for straightforward installation

Who Is This For

- Drivers of Peugeot 407 SW models from 2004 to 2015 needing a rear wiper replacement

• Owners of Citroen C5 models from 2001 to 2008 looking for a direct fit rear wiper set

• DIY enthusiasts who prefer to replace worn wiper components themselves

• Anyone wanting an affordable aftermarket alternative to expensive dealer parts

Usage Scenario

Mark noticed his rear wiper was leaving streaks across his Peugeot 407 SW's back window, making it hard to see cars behind him on rainy mornings. He ordered this complete arm and blade kit, swapped out the old assembly in about 15 minutes, and now enjoys a clean, clear view every time he hits the road.

Micro Comparison

While some sellers offer only the wiper blade or the arm separately, this kit includes both components in one package. This saves you the trouble of matching parts from different sources and ensures the arm and blade work together correctly. It is a practical choice for a complete rear wiper refresh.

Specifications

Material: PVC

Color: Black

Blade Length: 30 cm / 11.8 in

Arm Length: 29 cm / 11.4 in

Placement: Rear

Mounting Bolt Size: 8mm

Package Quantity: 2 pieces (1 wiper blade + 1 wiper arm)

Package Includes

1x Wiper Blade

1x Wiper Arm

Why You Will Love It

This rear wiper set takes the guesswork out of finding the right replacement for your Peugeot or Citroen. It is a complete, ready-to-install kit that matches your vehicle's original dimensions, so you can get back on the road with confidence and a clear rear view.

Questions and Answers

Question: Will this fit my Peugeot 407 SW from 2010?

Answer: Yes, this set fits Peugeot 407 SW models produced from 2004 to 2015.

Question: Does this include both the arm and the blade?

Answer: Yes, the package includes one wiper arm and one wiper blade.

Question: What is the blade length?

Answer: The blade is 30 cm / 11.8 inches long.

Question: Is installation difficult?

Answer: It mounts on an 8mm bolt. Professional installation is recommended if you are not experienced with wiper replacement.

Question: Will this work on a Citroen C5 from 2005?

Answer: Yes, it fits Citroen C5 models from 2001 to 2008.

This rear wiper arm and blade kit is a direct replacement for specific models of the Peugeot 106, 206, and 206+. It provides a simple solution for restoring clear visibility through your rear windshield.

Designed for a straightforward swap, this kit includes both the arm and the blade. The blade features a graphite-coated natural rubber edge for quiet, consistent wiping. The arm itself has a painted surface treatment to resist fading and aging from sun exposure.

The kit uses a high-tensile strength spring to maintain proper blade-to-glass contact. This ensures a clean, streak-free wipe every time. It is a practical and durable replacement part for maintaining your vehicle's rear visibility.

Replacing a worn or damaged rear wiper improves safety and driving comfort. This kit offers a reliable, long-lasting solution without the need for complicated installation or special tools.

Key Features and Benefits

- Graphite-coated natural rubber blade that provides quiet operation and a long service life.

• Painted arm surface that resists aging and prevents the wiper from turning white in sunlight.

• High-tensile strength spring that ensures consistent blade-to-glass contact for a clean wipe.

• Complete kit includes both the arm and blade for a full rear wiper replacement.

• Direct fit replacement for specific Peugeot models, simplifying the installation process.

Who Is This For

- Owners of a Peugeot 106 (1995-2005), 206 (1998-2009), or 206+ (2009-2013) needing a rear wiper replacement.

• Drivers looking for a complete arm and blade kit for a single, easy purchase.

• Anyone wanting a quiet and durable wiper blade for consistent rear window cleaning.

• Vehicle owners performing routine maintenance or preparing for seasonal weather changes.

Usage Scenario

After a few years of use, the rear wiper on a 2005 Peugeot 206 started to leave streaks and make a chattering noise. Rainy drives made it hard to see out the back. Instead of replacing just the blade, this complete arm and blade kit was installed. The new arm's spring provided firm, even pressure, and the graphite-coated rubber wiped silently and cleanly, restoring full rear visibility.

Micro Comparison

Many universal rear wipers can be a hassle to fit and may not provide the correct spring tension. This kit is a direct replacement designed specifically for your Peugeot model. It includes both the arm and the blade, ensuring perfect compatibility and a simple, secure installation that restores factory-like performance.

Specifications

- Item Type: Rear Wiper Arm Blade Set

• Material: ABS + Rubber

• OEM Number: 6429R2

• Placement: Rear

Package Includes

- 1 x Rear Wiper Blade

• 1 x Rear Wiper Arm

Why You Will Love It

You will appreciate the simple, direct fit that saves you time and hassle. The quiet, streak-free wiping gives you a clearer view and more confidence when driving in rain or snow. It is a small, affordable upgrade that makes a real difference in your daily drive.

Questions and Answers

Question: Will this fit my 2003 Peugeot 206?

Answer: Yes, this kit is a direct replacement for the Peugeot 206 from 1998 to 2009.

Question: Does this include both the arm and the blade?

Answer: Yes, the package includes one rear wiper arm and one rear wiper blade.

Question: Is the blade made from natural rubber?

Answer: Yes, the blade is constructed from a graphite-coated natural rubber for quiet operation.

Question: What is the OEM number for this part?

Answer: The OEM number for this kit is 6429R2.

Question: Is this a direct fit or do I need to modify anything?

Answer: It is a direct replacement, designed to fit without any modifications.

Replace your worn-out windshield wipers with a direct-fit set designed specifically for the Audi A8 D3 from 2002 to 2009. These front wiper blades measure 24 inches on the driver side and 23 inches on the passenger side, providing full coverage for a clear view in any weather.

Each blade is built with high-grade natural rubber to deliver consistent, streak-free wiping performance. The aerodynamic design helps reduce drag, noise, and wind lift, keeping the blades firmly pressed against the glass even at highway speeds. A tension memory system applies even pressure along the entire blade length, so you get a smooth, chatter-free wipe every time.

These wipers are tested to handle extreme temperatures, from 158°F down to -40°F (70°C to -40°C). The specially blended rubber resists cracking and hardening in cold conditions, while the covered structure prevents ice and snow from building up on the frame. Each set includes both the driver side and passenger side blades, ready to install as a direct replacement for your old ones.

Made from high-grade natural rubber and backed by ISO9001 certification, these wiper blades offer reliable performance for daily driving. They are a custom fit for the Audi A8 D3 model years 2002 through 2009 and are not suitable for right-hand drive vehicles.

Key Features and Benefits

- Custom fit for Audi A8 D3 2002-2009 that allows direct replacement of old wipers without modifications

• High-grade natural rubber material that delivers smooth, clean, chatter-free wiping

• Aerodynamic design that significantly reduces drag, noise, and wind lift at higher speeds

• Tension memory system that applies even pressure along the entire blade for consistent contact

• Temperature tolerance from -40°F to 158°F (-40°C to 70°C) that prevents cracking in extreme cold

• Ice and snow resistant structure that prevents buildup on metal or plastic components

Who Is This For

- Audi A8 D3 owners with model years 2002 through 2009 looking for a direct replacement set

• Drivers who need reliable all-weather performance in both hot summers and freezing winters

• Anyone wanting to restore clear visibility without visiting a dealership or mechanic

Usage Scenario

It was a rainy evening on the highway, and Mark could barely see the lane markings through the smeared streaks left by his old wipers. He had been putting off the replacement for months, but the constant chatter and skipped patches were getting dangerous. After swapping in this set, the first wipe cleared the entire windshield in one smooth pass. No noise, no streaks, just a clean view all the way home.

Micro Comparison

Unlike universal wiper blades that require adapter clips and often leave gaps at the edges, this set is specifically designed for the Audi A8 D3 curvature and arm pressure. The natural rubber compound outperforms basic silicone blades in cold weather flexibility, and the covered frame design prevents ice buildup that can freeze standard metal-frame wipers solid overnight.

Specifications

- Material: High Grade Natural Rubber

• Placement: Front, Driver Side and Passenger Side

• Size: 24 inches (driver side) + 23 inches (passenger side)

• Temperature Tolerance: +158°F to -40°F (+70°C to -40°C)

• Certification: ISO9001

Package Includes

- 2 x Front Wiper Blades (Driver Side and Passenger Side)

Why You Will Love It

You will love how these wipers restore the factory-clear visibility your Audi deserves. The quiet, streak-free operation makes every drive more comfortable, whether you are commuting through rain or scraping ice off your windshield in the morning. One simple swap gives you years of reliable performance without any complicated installation steps.

Questions and Answers

Question: Will these fit my 2005 Audi A8 D3?

Answer: Yes, these wipers are designed for the Audi A8 D3 from 2002 to 2009, including the 2005 model year.

Question: Do these come as a pair or do I need to buy each side separately?

Answer: The set includes both blades. You get one 24-inch driver side blade and one 23-inch passenger side blade.

Question: Are these wipers compatible with right-hand drive vehicles?

Answer: No, these are designed for left-hand drive models only and will not fit right-hand drive vehicles.

Question: What is the temperature range these wipers can handle?

Answer: They are tested to work from -40°F up to 158°F (-40°C to 70°C), making them suitable for both extreme cold and hot climates.

Question: Does this product come with an installation manual?

Answer: No, this item does not come with a manual installation guide. The wipers are designed for direct replacement, so you can swap them by following standard wiper installation steps.

Question: What material are the wiper blades made of?

Answer: They are made from high-grade natural rubber, which provides smooth, chatter-free wiping performance.

Replace your worn, cracked, or missing rear wiper assembly on your Jeep Grand Cherokee with this complete wiper blade and arm kit. It is designed to restore clear visibility through your liftgate glass, helping you drive safely in rain, snow, or road spray. This kit includes both the arm and the blade, so you get everything needed for a full rear wiper replacement.

This rear wiper arm is built with PBT material to hold its shape during daily use and resist bending or warping over time. The black finish blends in with the rear exterior of your Grand Cherokee, keeping the look clean and factory-style. The included wiper blade is made from rubber, providing a smooth wipe across the glass surface without leaving streaks or chatter marks.

Installation requires checking the rear glass shaft position, arm angle, and blade contact area before assembly. Professional installation is recommended to ensure proper fitment and optimal wiping performance. The kit is a direct replacement for the factory assembly on your Jeep Grand Cherokee from model years 1998 through 2004.

This kit matches OEM part numbers 42892, 5102882AA, and A0064A0004. Always verify your vehicle model details and exact OE number to confirm compatibility before purchasing.

Key Features and Benefits

- Complete replacement kit that includes both the rear wiper arm and blade, saving you time and effort finding separate parts

• PBT material construction that helps the arm keep its shape during daily rear window wiping use, providing long-lasting performance

• Black finish that matches the rear exterior area of your Jeep Grand Cherokee, maintaining a clean and factory appearance

• Rubber wiper blade that delivers a smooth wipe across the glass surface, reducing streaks and improving visibility

• Compatible with Jeep Grand Cherokee 1998-2004, making it a reliable direct replacement for worn or damaged rear wiper assemblies

Who Is This For

- Jeep Grand Cherokee owners with a rear wiper arm that is loose, cracked, or missing

• Drivers who need to restore clear visibility through the liftgate glass during rain, snow, or muddy conditions

• DIY mechanics and car owners looking for a complete rear wiper kit that includes both arm and blade

• Anyone replacing a worn or broken rear wiper assembly on a 1998-2004 Jeep Grand Cherokee

Usage Scenario

Mark drives a 2002 Jeep Grand Cherokee that he uses for daily commuting and weekend trips to the lake. Last winter, the rear wiper arm snapped off after a heavy snowstorm, leaving the liftgate glass covered in salt and grime. He could barely see out the back when reversing out of his driveway. He ordered this wiper arm and blade kit, checked the shaft position and arm angle, and installed it in his garage. Now his rear visibility is clear again, and he feels safer driving in bad weather.

Micro Comparison

Many universal wiper arms require adapters or modifications to fit properly on a Jeep Grand Cherokee. This kit is designed specifically for the 1998-2004 Grand Cherokee, so it matches the factory shaft size and arm angle without extra parts. It includes both the arm and the blade, which saves you from buying them separately and hoping they work together.

Specifications

- Material: PBT (arm), Rubber (blade)

• Color: Black

• Placement: REAR

• Part Numbers: 42892, 5102882AA, A0064A0004

• Compatibility: Jeep Grand Cherokee 1998-2004

Package Includes

- 1 x Rear Windshield Wiper Arm With Cover

• 1 x Wiper Blade

Why You Will Love It

You will love this kit because it gives you a complete rear wiper replacement in one package, saving you the hassle of finding separate parts. The durable PBT arm and rubber blade work together to keep your liftgate glass clear in all weather. It is a direct fit for your Jeep Grand Cherokee, so you can install it and get back on the road with confidence.

Questions and Answers

Question: Will this fit my 2001 Jeep Grand Cherokee Laredo?

Answer: Yes, this kit is compatible with the Jeep Grand Cherokee Laredo from 1998 to 2004, including the 2001 model year.

Question: Does this kit include the wiper blade or just the arm?

Answer: It includes both the rear wiper arm with cover and the wiper blade, so you get a complete replacement assembly.

Question: Is professional installation required?

Answer: Professional installation is recommended to ensure proper fitment, but experienced DIYers can install it by checking the shaft position, arm angle, and blade contact area.

Question: What is the wiper blade made of?

Answer: The wiper blade is made of rubber, which provides a smooth and streak-free wipe on the rear glass.

Question: How do I know if this fits my specific Grand Cherokee?

Answer: Check your vehicle model details and exact OE number. This kit matches part numbers 42892, 5102882AA, and A0064A0004. If your rear wiper assembly uses one of these numbers, it will fit.

Replace your worn-out rear wiper with this set of two wiper arms and blades. Designed specifically for the Chevrolet Spark models from 2011 to 2017, this kit offers a direct fit for a quick and easy installation. It helps you maintain a clear rear view in rain or snow, keeping your driving safer.

This wiper arm and blade combo is a practical replacement for your Chevy Spark's rear windshield. Made with a rubber blade, it is built to provide consistent wiping performance. The set includes two complete units, so you have a spare ready for the next change.

Installing these wiper arms is straightforward and does not require any special tools. They are designed to match the factory specifications of your vehicle. By replacing old, streaky wipers, you can improve your rear visibility without visiting a mechanic.

This kit is a cost-effective solution for maintaining your car. Having a spare wiper arm and blade on hand means you are prepared for sudden wear. Keep your Spark's rear window clean and functional with this simple upgrade.

Key Features and Benefits

- Direct fit replacement that installs easily on your Chevrolet Spark without modifications.

• Set of two wiper arms and blades that provides a spare for future use.

• Rubber blade construction that offers reliable wiping to clear rain and debris.

• OEM part number 95995875 that ensures compatibility with your vehicle's wiper system.

Who Is This For

- Chevrolet Spark owners from model years 2011 to 2017 needing a rear wiper replacement.

• Drivers who want a complete wiper arm and blade set instead of just a blade refill.

• Car owners looking for a spare wiper kit to keep in the trunk for emergencies.

Usage Scenario

Maria noticed her rear wiper was leaving streaks across the glass, making it hard to see cars behind her on rainy evenings. She ordered this 2-piece set for her 2014 Chevrolet Spark. After a quick five-minute swap in her driveway, the new wiper cleared the window smoothly. She kept the second arm and blade in her glove box, knowing she had a backup ready for the next season.

Micro Comparison

Unlike buying a single wiper arm or a blade-only refill, this set gives you two complete units. It saves you from having to match parts from different brands. This kit is a straightforward, one-purchase solution for your rear wiper needs.

Specifications

Material: Rubber

Placement: REAR

OEM Number: 95995875

Compatibility: For 2013-2015 Chevrolet Spark LS, LT Hatchback 4-Door

Year: 2011, 2012, 2013, 2014, 2015, 2016, 2017

Package Includes

- 2 x Rear Wiper Arms and Blades

Why You Will Love It

You will love the confidence of having a clear rear view in bad weather. The simple installation saves you time and money on labor. Having a spare wiper set means you are always prepared for the next replacement.

Questions and Answers

Question: Does this fit a 2012 Chevrolet Spark?

Answer: Yes, this wiper arm and blade set fits Chevrolet Spark models from 2011 to 2017.

Question: Is this for the front or rear windshield?

Answer: This set is designed for the rear windshield of the vehicle.

Question: Does the package include two complete wiper arms?

Answer: Yes, the package includes two rear wiper arms with blades attached.

Question: Do I need any special tools to install these?

Answer: No, the installation is straightforward and does not require special tools.

Question: What material is the wiper blade made of?

Answer: The wiper blade is made of rubber.

Keep your rear windshield clear and your driving safe with this precise 10-inch rear wiper blade designed specifically for the Suzuki Swift V (AZ) models from 2017 to 2023. It is a direct replacement for your worn-out tailgate wiper, ensuring a perfect fit and reliable performance in rain, snow, and road spray.

This wiper blade is built with a high-grade natural rubber composition. This material provides maximum performance by delivering a clean, consistent wipe across the rear window. It helps remove water, dirt, and debris effectively, improving your rearward visibility without streaks or skipping.

Each blade is a 100% brand new unit that has been quality checked before shipping. It is designed for simple installation, allowing you to replace your old rear wiper quickly and get back on the road. This blade focuses on durability and function, offering a dependable solution for your Suzuki's maintenance needs.

Key Features and Benefits

- High-grade natural rubber construction that ensures maximum wiping performance and a clean, streak-free rear window.

• Designed specifically for the Suzuki Swift V (AZ) 2017-2023 that guarantees a perfect, hassle-free fit on your tailgate.

• 100% brand new and quality checked before shipping that provides peace of mind and reliable operation right out of the package.

• Direct replacement for your old rear wiper blade that restores clear visibility without needing complex tools or modifications.

Who Is This For

- Owners of a Suzuki Swift V (AZ) from model years 2017 to 2023 needing a rear wiper replacement.

• Drivers looking for a simple, direct-fit part to maintain their vehicle's safety and visibility.

• Car owners who prefer using high-grade natural rubber wiper blades for their durability and effective cleaning.

Usage Scenario

After a long drive on a rainy highway, Mark noticed his rear window was smeared with a thick film of water and grime. The old wiper blade was leaving streaks that made it hard to see cars behind him. He ordered this 10-inch rear wiper blade for his 2019 Suzuki Swift. Within minutes of opening the package, he had the old blade off and the new one snapped securely in place. The next morning, a single swipe of the new rubber blade cleared the glass perfectly, giving him a crystal-clear view on his commute.

Micro Comparison

Unlike universal wiper blades that often require adapters or leave gaps on curved glass, this blade is custom-fit for the Suzuki Swift V (AZ) 2017-2023. Its high-grade natural rubber composition provides a consistent contact patch that many generic budget blades cannot match, leading to less noise and a more thorough wipe over the life of the product.

Specifications

- Material: High Grade Natural Rubber

• Placement: REAR

• Composition: Rear wiper blade ONLY

Package Includes

- 1 x Rear Wiper Blade

Why You Will Love It

Restoring your rear visibility is one of the simplest ways to feel more confident behind the wheel. This wiper blade is a straightforward, reliable fix that brings your Suzuki Swift back to its best driving condition. You will appreciate the quick installation and the immediate improvement in your rear view.

Questions and Answers

Question: Will this wiper blade fit my 2020 Suzuki Swift V?

Answer: Yes, this blade is designed for the Suzuki Swift V (AZ) from 2017 to 2023, including the 2020 model year.

Question: Is this just the rubber refill or the whole blade arm?

Answer: This is the complete rear wiper blade, not just a rubber refill. It is ready to install directly onto your vehicle's wiper arm.

Question: What material is the wiper blade made from?

Answer: It is made from high-grade natural rubber for maximum performance and durability.

Question: Is this a brand new product?

Answer: Yes, it is 100% brand new and has been quality checked before shipping.

Question: Does this come with an installation guide?

Answer: It is a direct-fit replacement designed for simple installation on your Suzuki Swift, though a specific paper guide is not included in the package.

Keep your windshield clear and your drive safe with these universal car wiper blades. Designed for a frameless and bracketless fit, they use a soft double-layer rubber construction to deliver a clean, streak-free wipe every time.

These wipers are built for the front windshield and work with a wide range of vehicles, including both left-hand and right-hand drive models. The dual rubber strip technology helps the blade last longer while providing a more thorough clean, even in heavy rain or light snow.

The streamlined frameless design reduces wind lift at high speeds, keeping the blade pressed firmly against the glass. Installation is straightforward, and the universal fit means you can replace your old wipers without needing a specific adapter for most cars.

Whether you are dealing with morning dew, a sudden downpour, or road spray, these wipers help you maintain a clear view. They are a practical upgrade for anyone who wants reliable performance without spending a lot.

Key Features and Benefits

- Dual rubber blade construction that provides a longer-lasting, cleaner wipe compared to standard single-layer wipers.

• Frameless and bracketless design that reduces wind lift and ice buildup for consistent contact with the windshield.

• Soft rubber material that glides smoothly across the glass to minimize streaks, chatter, and noise.

• Universal fit for 99.99% of car models, including both left-hand and right-hand drive vehicles.

• Easy to install with the correct wiper interface and length selection for your vehicle.

Who Is This For

- Drivers looking for a simple, direct replacement for worn-out or streaky windshield wipers.

• Car owners who want a frameless design that performs well in rain, snow, and everyday driving conditions.

• Anyone seeking a budget-friendly wiper upgrade without compromising on cleaning performance.

Usage Scenario

You are driving home on a rainy evening, and your old wipers leave smears across the windshield, making it hard to see the road ahead. After swapping in these universal frameless wipers, the first swipe clears the glass completely. The dual rubber strips hug the curve of the windshield, and the noise you used to hear is gone. You can focus on the road instead of the streaks.

Micro Comparison

Many standard wipers use a single rubber strip that wears down quickly and leaves streaks. This wiper uses a double-layer rubber design that lasts longer and cleans more thoroughly. The frameless construction also helps it perform better at highway speeds compared to traditional framed wipers that can lift off the glass.

Specifications

- Placement: Front

• Material: Rubber (Blade: ABSP Rubber, AA level)

• Special Features: Dual Rubber

• Available Sizes: 14" (350mm), 15" (375mm), 16" (400mm), 17" (425mm), 18" (450mm), 19" (475mm), 20" (500mm), 21" (525mm), 22" (550mm), 24" (600mm), 26" (650mm), 27" (675mm), 28" (700mm)

• Compatibility: Suitable for 99.99% of car models, including left-hand and right-hand drive

Package Includes

- 1 x Car Windshield Wiper Blade

Why You Will Love It

You will love how these wipers restore a clear view of the road without the hassle of complicated installation or expensive replacements. The dual rubber strips give you a confident wipe every time, rain or shine. It is a small upgrade that makes every drive feel safer and more comfortable.

Questions and Answers

Question: Will these wipers fit my car?

Answer: These wipers fit 99.99% of car models. You just need to select the correct wiper interface and length for your vehicle.

Question: Are these wipers for the front or rear windshield?

Answer: These wipers are designed for the front windshield.

Question: What is the advantage of a frameless wiper?

Answer: A frameless design reduces wind lift at high speeds and prevents ice and snow from building up on the frame, keeping the blade in contact with the glass.

Question: How do I choose the right size?

Answer: Check your vehicle's owner manual or measure your current wiper blade length. Sizes range from 14 inches to 28 inches.

Question: Are these wipers quiet?

Answer: Yes, the soft rubber material helps reduce chatter and noise during operation.

Question: Do these wipers work on both left-hand and right-hand drive cars?

Answer: Yes, they are suitable for all models including left-hand drive and right-hand drive vehicles.

Replace your worn-out rear wiper with this complete arm and blade set, designed specifically for the MG ZS EV, ZSEV, and EZS models from 2017 to 2023. It restores clear visibility through your rear windshield, helping you drive safely in rain or snow.

This kit includes both the wiper arm and the wiper blade, so you get everything you need in one package. It is built from durable plastic, metal, and rubber to handle daily use and changing weather conditions. The set is a direct replacement part, which means it fits onto your vehicle without any modifications.

This aftermarket part matches the OEM number 10387825 and is made to work with your MG. It installs easily and provides a clean, streak-free wipe across the rear window. Keep your view clear and your driving stress-free with this simple upgrade.

Whether you are dealing with light drizzle or heavy rain, this rear wiper set helps you see what is behind you. It is a practical replacement for an older worn-out wiper that no longer cleans effectively.

Key Features and Benefits

- Complete set includes both the rear wiper arm and blade for a full replacement

• Direct fit for MG ZS EV, ZSEV, and EZS models from 2017 to 2023

• Made from plastic, metal, and rubber for long-lasting performance

• Restores clear rear visibility in rain, snow, and road spray

• Aftermarket part with OEM number 10387825 for accurate compatibility

Who Is This For

- MG ZS EV and ZSEV owners from 2017 to 2023 needing a rear wiper replacement

• Drivers who want a simple, complete kit instead of buying the arm and blade separately

• Anyone whose current rear wiper is leaving streaks, squeaking, or not making full contact

• Car owners looking for an affordable aftermarket alternative to a dealer part

Usage Scenario

Emily drives her MG ZS EV to work every day, and during the rainy season, her old rear wiper left a messy smear across the glass. She could barely see cars behind her. After installing this replacement arm and blade set, the rear window clears up with a single swipe. Now she feels safer changing lanes and reversing in wet weather.

Micro Comparison

Unlike buying a generic universal wiper that may not fit properly, this set is made specifically for the MG ZS EV and ZSEV series. It includes both the arm and blade, so you do not have to hunt for a separate part. It is a practical, direct-fit solution that saves time and gives you confidence in your purchase.

Specifications

- Material: Plastic, metal, rubber

• Placement: Rear

• OEM Number: 10387825

• Fitment: For MG ZS EV ZSEV 2017-2023 EZS

Package Includes

- 1 x Rear Wiper Arm

• 1 x Rear Wiper Blade

Why You Will Love It

You will love how easy it is to restore your rear visibility without visiting a mechanic. This complete set takes the guesswork out of finding the right part. It is a simple, cost-effective way to keep your MG safe and road-ready.

Questions and Answers

Question: Will this fit my 2019 MG ZS EV?

Answer: Yes, this rear wiper arm and blade set fits the MG ZS EV, ZSEV, and EZS models from 2017 to 2023, including the 2019 version.

Question: Does this include both the arm and the blade?

Answer: Yes, the package includes one rear wiper arm and one rear wiper blade.

Question: Is this a genuine MG part?

Answer: This is an aftermarket replacement part, not a genuine MG part. It is designed to match the OEM number 10387825 for a direct fit.

Question: What is the material of this wiper set?

Answer: It is made from plastic, metal, and rubber for durability and effective wiping.

Question: How do I know if this will fit my car?

Answer: Please compare the part number 10387825 with your original part before purchasing. This set is designed for the rear placement on MG ZS EV, ZSEV, and EZS models from 2017 to 2023.

Keep your windshield clear and your drive safe with these 22+22 inch front wiper blades designed for a wide range of Mercedes-Benz models. Specifically built to fit the W205, S205, C205, A205, C253, and X253 platforms, this set works with both LHD (left-hand drive) and RHD (right-hand drive) vehicles. Whether you drive a GLC, C Class Coupe, C43, GLC43, C63, or a C180, C200, 220, C250, or C300, these wipers offer a direct replacement that restores visibility during rain and road spray.

Each wiper blade features a rubber construction with a water-repellent coating that helps push moisture off the glass as you drive. This reduces streaking and smearing, so you get a cleaner wipe with every pass. The set includes one pair of blades for the front windshield, making installation quick and straightforward. Designed for Mercedes-Benz models from 2015 to 2023, these wipers match the original equipment specifications for a secure fit and consistent performance.

Replacing old, worn wipers does more than just clear water. It also helps remove built-up oil and residue from the windshield that can cause glare and reduce visibility. A fresh pair of wipers is often more effective than using separate cleaning solutions to tackle oily film. With these blades, you get a practical upgrade that improves your driving experience in wet conditions without extra steps or products.

Key Features and Benefits

- Water-repellent rubber material that pushes moisture away for a clearer view during rain

• Direct fit for Mercedes-Benz GLC, C Class, and Coupe models from 2015 to 2023

• Available in LHD and RHD versions so you get the correct fit for your vehicle

• OEM reference number A2058204603 ensures compatibility with factory

specifications

- Front pair set covers both driver and passenger sides for a complete replacement

Who Is This For

- Mercedes-Benz owners driving a GLC (X253), C Class (W205), C Class Coupe (C205), or S205 Estate

• Drivers looking to replace factory wipers with a water-repellent option for better rain performance

• Anyone needing a quick and simple front wiper set that matches OEM fitment for 2015-2023 models

Usage Scenario

Marc drives a 2019 Mercedes-Benz GLC300 and noticed that his old wipers left streaks across the windshield every time it rained. The film of oil and dirt made night driving harder than it should be. After switching to these 22+22 inch front wipers with the water-repellent coating, he saw immediate improvement. The blades cleared the glass in one smooth motion, and the water beaded up and rolled off instead of smearing. His evening commute felt noticeably safer.

Micro Comparison

Compared to standard replacement wipers that only clear water, these blades include a water-repellent feature that actively helps push moisture away from the glass. This can reduce the need for separate rain-repellent treatments. The direct fit for Mercedes-Benz models from 2015 to 2023 also saves you the hassle of searching for adapters or universal brackets.

Specifications

Material: Rubber

Placement: Front

Model Name: 22+22 inch

OEM Number: A2058204603

Special Features: Water repellent

External Testing Certification: ECE

Package Includes

- 1 pair of front wiper blades (22+22 inch)

Why You Will Love It

You get a pair of wipers designed to match your Mercedes-Benz perfectly, so installation is straightforward and the fit is secure. The water-repellent rubber helps you see clearly in wet weather without needing extra products. It is a simple upgrade that makes every rainy drive feel safer and more controlled.

Questions and Answers

Question: Will these wipers fit a 2017 Mercedes-Benz C300?

Answer: Yes, the 22+22 inch front wipers are designed for the C Class W205 platform, which includes the 2017 C300.

Question: What does LHD and RHD mean for these wipers?

Answer: LHD is for left-hand drive vehicles, and RHD is for right-hand drive vehicles. Choose the option that matches your car's steering wheel side.

Question: Are these wipers easy to install?

Answer: Yes, they are a direct replacement for the factory wipers and install without special tools.

Question: Do these wipers leave streaks on the windshield?

Answer: The water-repellent rubber helps reduce streaking and smearing compared to standard wipers.

Question: What years of Mercedes-Benz GLC are compatible?

Answer: These wipers fit the GLC (X253) models from 2015 to 2023.

This portable PCP air compressor pump delivers 4500Psi / 30Mbar of high pressure for diving bottles, PCP air rifles, and paintball tanks. It runs on both 12VDC and 110V power for flexible use at home or on the go.

Powered by a 250W brushless motor, this high pressure pump is designed for fast and efficient inflation. It can fill a 0.5L tank from 0 to 300 bars in about 20 minutes, and from 200 bars to 300 bars in just 8 minutes. The oil-free and water-free design keeps the air clean and safe for your equipment.

This portable compressor features a visible pressure gauge and an LED temperature display, so you can monitor the pump at all times. It also includes a built-in fan and a reusable carbon separator for heat dissipation and clean operation. The 8 mm quick connector makes connecting and disconnecting easy.

You can power this PCP compressor using a 12V car battery for outdoor use, or connect it to an external converter for home use with a 110V/220V AC socket. The compact size and convenient handgrip make it easy to carry and store.

Key Features and Benefits

- 4500Psi / 30Mbar max pressure that fills PCP air rifles, paintball tanks, and diving bottles quickly

• 250W brushless motor that provides efficient and reliable power for demanding inflation tasks

• Oil-free and water-free operation that keeps the air clean and protects your equipment

• Visible pressure gauge and LED temperature display that let you monitor the pump easily during use

• Dual power design (12V car battery and 110V/220V home outlet) that gives you the flexibility to inflate anywhere

• Built-in fan and reusable carbon separator that improve heat dissipation and extend the pump's life

Who Is This For

- PCP air rifle owners who need a reliable, portable compressor for field use

• Paintball and airsoft players who want to fill HPA tanks without visiting a shop

• Diving enthusiasts who need a compact pump for filling small diving bottles

• Anyone who needs a high pressure air source for hobby or light professional use

Usage Scenario

Mike packs his PCP air rifle and this portable compressor into his truck for a weekend hunting trip. At the shooting range, he connects the pump to his car's 12V battery and fills his rifle's tank from empty to full in about 20 minutes. The visible gauge lets him see the pressure rise, and the automatic shutoff at 4500Psi gives him peace of mind.

Micro Comparison

Unlike hand pumps that require a lot of physical effort and time, this electric compressor fills tanks much faster and with less work. Compared to larger, stationary compressors, this portable model is easy to take to the field or store in a small space. It offers a practical balance of speed, portability, and power.

Specifications

- Max Pressure: 4500Psi / 30Mbar

• Power Source: 12VDC / 110V AC (with converter)

• Motor: 250W brushless

• Filling Rate: 2700 R/min

• Connector: 8 mm quick connector

• Cooling: Built-in fan

• Filtration: Reusable carbon separator

Package Includes

- 1 x PCP Air Compressor Pump

• 1 x Power Cable

• 1 x User Manual

Why You Will Love It

This compressor saves you time and effort by filling your tanks quickly, whether you are at home or in the field. Its compact design and dual power options mean you can take your shooting or diving hobby anywhere without worrying about air supply.

Questions and Answers

Question: Can this compressor fill a diving bottle?

Answer: Yes, it can fill small diving bottles up to 4500Psi / 30Mbar.

Question: Does it work with a car battery?

Answer: Yes, it runs on 12VDC power from a car battery for portable use.

Question: How long does it take to fill a 0.5L tank?

Answer: It takes about 20 minutes to fill a 0.5L tank from 0 to 300 bars.

Question: Is the pump oil-free?

Answer: Yes, the pump is oil-free and water-free for clean air output.

Question: Can I use it at home with a wall outlet?

Answer: Yes, you can use it with a 110V/220V wall outlet by connecting an external converter.