Replace your car's faded or damaged dashboard LCD screen with this direct-fit VDO display. Designed for a wide range of Volkswagen, Audi, and Seat models, this LCD screen restores clarity to your instrument cluster. It is a practical fix for common display issues in older European cars.

This LCD display is a direct replacement for the original VDO unit in your dashboard. It brings back the sharp, readable information you need while driving, from speed and fuel levels to warning lights. Instead of replacing the entire instrument cluster, you can swap just the screen for a more affordable repair.

The installation requires soldering the display to the circuit board and connecting the SED1560TOB driver to the motherboard. This is a task for someone with basic electronics experience. Once installed, the display works just like the original, giving your dashboard a clean, fully functional look.

This screen matches the factory specifications of your car's original VDO display. It is a reliable solution for restoring an essential part of your driving experience without the high cost of a full cluster replacement.

Key Features and Benefits

- Direct replacement LCD screen that restores full functionality to your dashboard display

• Compatible with multiple VW, Audi, and Seat models for versatile use across different vehicles

• Uses the SED1560TOB driver for reliable performance and clear on-screen data

• Soldering installation ensures a secure, permanent connection to the circuit board

• Cost-effective repair option compared to replacing the entire instrument cluster

Who Is This For

- Owners of VW Golf, Passat, Audi A3, A4, A6, S3, or Seat models with a faded or non-functional LCD dashboard screen

• DIY car enthusiasts comfortable with basic soldering and electronics repair

• Anyone looking for a budget-friendly fix instead of a full instrument cluster replacement

Usage Scenario

Mark noticed the digital display on his 2001 Audi A4 dashboard was almost unreadable. The numbers were faint and flickering, making it hard to check his speed. Instead of paying for a whole new cluster, he ordered this VDO LCD screen. After carefully desoldering the old display and soldering in the new one, the dashboard looked like new. All the information was crisp and clear again, and the repair cost a fraction of the alternative.

Micro Comparison

Replacing just the LCD screen is a more affordable approach than swapping out the entire instrument cluster. While a full cluster replacement can be expensive and sometimes requires dealer programming, this screen swap focuses on the most common failure point. It does require basic soldering skills, but the cost savings and direct compatibility make it a smart choice for a hands-on repair.

Specifications

Compatible with: Audi A3 VDO, Audi A4 VDO, Audi A6 VDO, Volkswagen Golf, Volkswagen Passat VDO, Seat VDO

Driver: SED1560TOB

Installation: Requires soldering to circuit board

Package Includes

- 1 x LCD Display

Why You Will Love It

This LCD screen gives your car's dashboard a new lease on life without a major expense. You get back a clear, functional display that makes driving easier and more enjoyable. It is a satisfying DIY fix that saves you money and keeps your car on the road.

Questions and Answers

Question: Does this LCD display work with a 1998 Audi A6?

Answer: Yes, it is compatible with Audi A6 models that use a VDO display, including the C5 4B generation.

Question: Do I need any special tools to install this screen?

Answer: You will need a soldering iron and solder paste to connect the display to the circuit board.

Question: Will this fix a completely blank dashboard display?

Answer: It can restore a blank or faded display if the original LCD screen is the cause of the issue.

Question: Is this screen a direct fit for a 2003 Volkswagen Golf?

Answer: Yes, it is designed to fit Volkswagen Golf models that use a VDO dashboard LCD screen.

Question: What if my car has a different driver chip?

Answer: This display uses the SED1560TOB driver. Please check if your original display uses the same driver before purchasing.

Keep a close watch on your engine's health with this 2 in 1 LCD digital gauge. It combines a water temperature monitor and a voltmeter in a single, easy-to-read display, helping you spot potential issues before they become major problems.

This gauge is built for durability and simple operation. The large digital screen shows your coolant temperature and battery voltage clearly, even in bright sunlight thanks to its sunshield design. The included temperature sensor uses a standard 1/8 NPT thread, making it compatible with a wide range of vehicles.

Installation is straightforward with the included wiring and sensor. The gauge works with both 12V and 24V electrical systems, making it a versatile choice for cars, trucks, SUVs, and other vehicles. Its stable performance and anti-vibration construction ensure reliable readings on the road.

When the temperature or voltage goes outside the normal range, the display flashes an alarm. This immediate visual warning gives you time to react and protect your engine from overheating or electrical problems. It is a practical tool for any driver who values preventive maintenance.

Key Features and Benefits

- 2-in-1 function that combines a water temperature gauge and a voltmeter, saving dashboard space and providing two critical readings at a glance

• Digital LCD display with a sunshield that makes the numbers easy to read in direct sunlight, reducing glare and improving visibility

• 1/8 NPT temperature sensor thread that fits many common engine ports, making it compatible with a wide range of vehicles

• Wide power supply range from DC 9V to 36V that works on both 12V and 24V electrical systems, offering flexibility for different cars and trucks

• Flashing alarm function that immediately alerts you when the temperature or voltage is abnormal, helping you prevent engine damage

• Stable and precise measurement with +/-1% accuracy, giving you reliable data you can trust while driving

Who Is This For

- Car and truck owners who want to monitor engine coolant temperature and battery voltage in one compact gauge

• DIY mechanics and auto enthusiasts who prefer a simple, self-installed monitoring solution for their vehicle

• Drivers of older vehicles that lack built-in digital temperature or voltage readouts on the dashboard

• Fleet managers or commercial drivers who need a reliable, low-cost way to track engine health across multiple vehicles

Usage Scenario

Mark drives a 2005 work truck that he relies on for daily deliveries. The original dashboard gauges were hard to read and not very precise. After installing this 2-in-1 gauge, he can see the exact coolant temperature and battery voltage at a glance. One afternoon, the display started flashing, warning him that the voltage was dropping. He pulled over and found a loose alternator belt, fixing it before the battery died. The early warning saved him from a roadside breakdown and a costly tow.

Micro Comparison

Unlike single-function analog gauges that take up more space and can be hard to read in low light, this digital unit combines two essential readings in one compact housing. The LCD screen offers clear, precise numbers, and the sunshield improves visibility compared to non-shielded displays. For the price of one gauge, you get two monitoring functions with an alarm system that many budget gauges lack.

Specifications

Material: Plastic Shell Product

Size: 100mm x 56mm / 3.9 in x 2.2 in

Digit: 3 Digit

Power Supply: DC 9V - 36V

Accuracy: +/-1%

Cable Length: approx. 300 cm / 118.1 in

Temperature Sensor Screw Diameter: 10mm / 0.4 in

Temperature Sensor Thread: M10 / 1/8 NPT

Wiring: Red (power +), Red Black (power -)

Package Includes

- 1 x Car Truck LCD 2 in 1 Gauge (Water Temperature / Voltmeter)

• 1 x Temperature Sensor

• 1 x Wiring Harness

Why You Will Love It

This gauge gives you peace of mind every time you drive. You get two critical engine readings in one device, so you can spot problems early without guessing. It is an affordable upgrade that helps you take better care of your vehicle and avoid unexpected repairs.

Questions and Answers

Question: Can this gauge be used on a 12V car?

Answer: Yes, it works on both 12V and 24V systems, including most cars, trucks, and SUVs.

Question: Does the temperature sensor use a standard thread?

Answer: Yes, the sensor uses a 1/8 NPT thread, which is a common size for many engine ports and adapters.

Question: How long is the cable on the temperature sensor?

Answer: The cable is approximately 300 cm or 118 inches long, giving you enough length to reach most sensor locations.

Question: Does the display show both temperature and voltage at the same time?

Answer: Yes, it shows both readings on the same digital screen, so you can monitor them at a glance.

Question: What happens if the engine gets too hot?

Answer: The display will flash an alarm to warn you that the temperature or voltage is outside the normal range.

Keep an eye on your engine's electrical system and coolant temperature at the same time with this 2 in 1 LCD digital gauge. It combines a voltmeter and a water temperature gauge in one compact unit, giving you essential information to help prevent breakdowns and maintain your vehicle's performance.

This universal gauge is designed to fit a wide range of vehicles, including cars and trucks. It comes with a hose adapter and a 1/8NPT head plug, making installation straightforward. The digital display is easy to read, so you can quickly check your battery voltage and water temperature while you drive.

The gauge features a sunshield design that improves visibility in bright conditions. Its stable performance, anti-vibration, and anti-bump construction ensure reliable readings even on rough roads. With a power supply range of DC 9V to 36V, it works with both 12V and 24V electrical systems commonly found in vehicles.

Whether you are upgrading your dashboard or adding monitoring capability to your car, truck, or motorcycle, this gauge provides a practical and space-saving solution. The included temperature sensor and adapter simplify the setup process.

Key Features and Benefits

- 2 in 1 function combines a voltmeter and water temperature gauge that saves dashboard space and provides critical engine data at a glance.

• LCD digital display with sunshield design that improves readability in direct sunlight.

• Wide power supply range of DC 9V to 36V that works with both 12V and 24V vehicle systems.

• Includes temperature sensor and 1/8NPT head plug adapter that simplifies installation in various vehicles.

• Stable performance with anti-vibration and anti-bump construction that ensures accurate readings on rough terrain.

Who Is This For

- Car and truck owners who want to monitor battery voltage and engine coolant temperature.

• Motorcycle enthusiasts looking for a compact dual-function gauge for their dashboard.

• DIY mechanics and hobbyists who need an easy-to-install gauge for custom vehicle builds.

• Anyone upgrading their vehicle's instrumentation to include both volt and temperature monitoring.

Usage Scenario

Mark noticed his truck's battery light flickering on long drives. He installed this 2 in 1 gauge on his dashboard and could see the voltage dropping under load. The water temperature reading also alerted him to a rising engine temp during a steep climb, allowing him to pull over before any damage occurred. Having both readings in one gauge gave him the confidence to address issues early.

Micro Comparison

Some single-function gauges only monitor voltage or temperature, requiring separate units and more installation work. This 2 in 1 gauge combines both functions in one housing, saving space and simplifying wiring. It also includes a sunshield for better daylight visibility, a feature not found on many basic models.

Specifications

- Material: Plastic shell

• Power Supply: DC 9V - 36V

• Cable Length: approx. 300 cm / 118.1 in

• Product Size: 100 mm x 56 mm / 3.9 in x 2.2 in

• Temperature Sensor Screw: M10 (10 mm / 0.4 in)

• Digit: 3 Digit

• Accuracy: +/- 1%

• Color: Black

• Hose Adapter: 1/8NPT Head Plug

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x 2 in 1 LCD Digital Gauge

• 1 x Temperature Sensor

• 1 x Adapter

• 1 x Wiring Harness

Why You Will Love It

You will appreciate having two critical engine readings in one compact gauge, making your dashboard cleaner and more functional. The easy-to-read display and straightforward installation mean you can start monitoring your vehicle's health right away. It gives you peace of mind knowing you can catch electrical or cooling issues before they become major problems.

Questions and Answers

Question: Does this gauge work on a 12V system?

Answer: Yes, it works on both 12V and 24V systems with a power supply range of DC 9V to 36V.

Question: Can I install this on a motorcycle?

Answer: Yes, it is suitable for cars, trucks, and motorcycles. The included adapter helps with installation.

Question: What is the cable length?

Answer: The cable is approximately 300 cm or 118.1 inches long.

Question: Does the gauge come with a temperature sensor?

Answer: Yes, it includes a temperature sensor with an M10 screw.

Question: Is the display easy to read in sunlight?

Answer: Yes, the gauge has a sunshield design that improves visibility in bright conditions.

Get a clear and accurate reading of your engine's turbo pressure with this 52mm digital boost gauge. It displays both vacuum and boost pressure in bar and PSI, making it easy to monitor your engine's performance at a glance.

This gauge is designed for 12V gasoline engines and features a bright blue digital LED readout. The universal fit and simple installation process make it a practical upgrade for any car enthusiast looking to keep their turbo system in check.

The included electronic boost sender and PVC hose allow for a straightforward setup. With a measurement range of -1 to 3 bar and -15 to 45 PSI, this gauge covers both vacuum and boost conditions, giving you the information you need to drive with confidence.

Built with a durable plastic shell, this gauge is made to withstand the demands of the engine bay. Its compact 52mm diameter fits neatly into standard gauge pods or panels.

Key Features and Benefits

- Blue digital LED readout that provides a clear and easy-to-read display of your boost pressure in both bar and PSI.

• Universal fit for most 12V gasoline cars, making it a versatile choice for a wide range of vehicles.

• Includes an electronic boost sender and 6 feet of PVC hose with a T-fitting for a complete installation kit.

• Reads from -1 to 3 bar and -15 to 45 PSI, covering both vacuum and boost conditions for a full picture of engine performance.

• 52mm diameter (2 inch) size that fits standard gauge housings and pods for a clean installation.

Who Is This For

- Car enthusiasts who want to monitor their turbocharged engine's boost pressure accurately.

• DIY mechanics looking for an easy-to-install gauge with a complete installation kit.

• Drivers of 12V gasoline vehicles who need a reliable digital boost gauge for performance tuning or troubleshooting.

• Anyone upgrading their vehicle's dashboard with a clear and functional digital gauge.

Usage Scenario

Mark had just finished installing a new turbo kit on his project car. He needed a reliable way to see if the system was running at safe pressure levels. After wiring this digital boost gauge into his 12V system, he could instantly see the vacuum at idle and the boost climbing under acceleration. The blue LED display was bright enough to read even on sunny days, and the simple installation meant he was back on the road in under an hour. Now he drives with confidence, knowing exactly what his turbo is doing.

Micro Comparison

Unlike mechanical gauges that can be difficult to read at night, this digital gauge uses a bright blue LED display for clear visibility in any light. It also comes with a complete installation kit, including the sensor, hose, and T-fitting, saving you the trouble of sourcing parts separately. For a 12V gasoline engine, this gauge offers a practical balance of accuracy and ease of use.

Specifications

Material: Plastic Shell

Size: 52mm diameter (2 inch gauge)

Power: 12V, IGN MAX 0.3A

Reads: -1 to 3 bar / -15 to 45 PSI

Item Weight: 400g

Package Includes

- 1 x Digital LED Boost Gauge

• 1 x Boost Sensor

Why You Will Love It

You will love how easy it is to install and how clearly it displays your engine's boost pressure. The bright blue LED readout makes it simple to check your turbo system at a glance, and the complete kit means you have everything you need to get started. It is a practical tool that helps you drive with more awareness and control.

Questions and Answers

Question: Is this gauge compatible with diesel engines?

Answer: This gauge is designed for 12V gasoline engines. It may not be suitable for diesel engines without modification.

Question: Does the gauge come with a wiring harness?

Answer: The gauge includes an electronic boost sender, 6 feet of PVC hose, and a T-fitting. Wiring instructions are provided for installation.

Question: Can I use this gauge for a naturally aspirated engine?

Answer: Yes, this gauge reads vacuum pressure as well, so it can be used on naturally aspirated engines to monitor intake vacuum.

Question: How do I calibrate the gauge after installation?

Answer: The gauge is pre-calibrated. Once installed and powered on, it will show the current pressure reading without additional setup.

Question: What is the diameter of the gauge?

Answer: The gauge has a 52mm diameter, which is a standard 2 inch size for most gauge pods and panels.

Keep a close eye on your engine's vital signs with this 2 in 1 digital gauge. It combines a water temperature gauge and a voltmeter in one compact, easy-to-read LCD display. You get real-time data on both coolant temperature and battery voltage, helping you catch potential issues before they become costly repairs.

This gauge is built for universal fitment on 12V and 24V vehicles. It works with a wide power supply range of DC 9V to 36V, making it suitable for cars, trucks, SUVs, and vans. The digital display gives you precise readings, so you always know what is happening under the hood.

Installation is straightforward with the included water temperature sensor and adapter options. The kit comes with a 10mm sensor and adapters for 28mm and 34mm hoses, plus a 1/8 NPT sensor thread for flexibility. The gauge also features a flashing alarm to alert you when temperatures or voltage levels go out of range.

The plastic shell housing is durable and designed to resist vibration and bumps. Its round LCD screen is easy to read at a glance, even in low light. This gauge is a practical upgrade for anyone who wants more control over their vehicle's engine health without adding clutter to the dashboard.

Key Features and Benefits

- Digital LCD display that shows clear, precise readings for quick visual checks.

• 2 in 1 function that monitors both water temperature and battery voltage, reducing the need for multiple gauges.

• Wide power supply range from DC 9V to 36V, making it compatible with most 12V and 24V vehicles.

• Flashing alarm feature that alerts you when readings go outside safe limits, helping prevent engine damage.

• Includes a water temperature sensor and adapter options for flexible installation in different hose sizes.

• Stable performance with low power consumption, so it won't drain your battery.

Who Is This For

- Car and truck owners who want a simple way to monitor engine temperature and battery voltage.

• DIY mechanics installing aftermarket gauges for better engine diagnostics.

• Off-road and work vehicle operators who need reliable data in tough conditions.

• Anyone replacing a broken or inaccurate factory temperature gauge with a modern digital unit.

Usage Scenario

Mark drives an older pickup truck he uses for weekend camping trips. Last summer, the engine overheated on a long hill climb, and he had no warning until steam came from the hood. After installing this 2 in 1 gauge, he now sees the water temperature and voltage at a glance. On a recent trip, the flashing alarm caught a rising temperature early, letting him pull over and let the engine cool before any damage was done. He says it feels like having a second set of eyes on the engine.

Micro Comparison

Many basic temperature gauges only show coolant temperature and use a needle or analog display that is hard to read precisely. This gauge gives you both temperature and voltage readings on a clear digital screen. The included sensor and adapter set also make installation more flexible than single-purpose gauges that require separate purchases for different hose sizes.

Specifications

- Material: Plastic Shell

• Power Supply: DC 9V - 36V

• Water Temperature Measurement Range: -10°C to 110°C / 14°F to 230°F

• Water Temperature Sensor Size: 10 mm / 0.4 in

• Suitable for 12V and 24V vehicles

Package Includes

- 1x LCD 2 in 1 Car Gauge (Voltage and Water Temperature Gauge)

• 1x Water Temperature Sensor (10 mm)

• 1x Adapter (for 28 mm or 34 mm hose, depending on variant)

Why You Will Love It

You get two critical engine readings in one compact gauge, saving dashboard space and installation time. The digital display is easy to read, and the flashing alarm gives you peace of mind on every drive. It is a practical, affordable way to keep your vehicle running smoothly.

Questions and Answers

Question: What voltage does this gauge work with?

Answer: It works with DC 9V to 36V, so it is compatible with both 12V and 24V vehicle electrical systems.

Question: Does this gauge come with the temperature sensor?

Answer: Yes, it includes a water temperature sensor with a 10 mm thread, plus an adapter for different hose sizes.

Question: Can I install this in my truck?

Answer: Yes, it is designed for universal fitment in cars, trucks, SUVs, and vans that use 12V or 24V systems.

Question: How accurate is the temperature reading?

Answer: The digital display provides precise readings within the range of -10°C to 110°C, so you can monitor engine coolant temperature closely.

Question: Does the gauge have an alarm if the temperature gets too high?

Answer: Yes, the display will flash to alert you when the temperature or voltage goes outside the normal operating range.

Monitor your engine's vital signs with this 3 in 1 digital gauge. It combines a water temperature gauge, oil pressure meter, and voltmeter into a single 52mm display, giving you real-time data at a glance. Built-in alarm thresholds help you catch problems before they cause damage.

This gauge uses a 100% imported MCU for stable and reliable performance. The housing is made from 316 stainless steel and plastic, designed to resist corrosion in humid or acidic environments. With an IP67 waterproof and dustproof rating, it can handle tough conditions on the road or water.

The high-brightness LED backlight ensures the display is easy to read in any light. The unit also features a sensor disconnect alarm, showing "OFF" on the screen if a sensor fails. This gauge can match many sensor signals, including 0~190 Ω, 240~33 Ω, 0~5 V, 0.5~4.5 V, and 4~20 mA, making it versatile for different setups.

Operating voltage is 9~32 VDC, and the gauge draws ≤60 mA. It works in temperatures from -20 to 70°C and can be stored between -30 to 80°C. The package includes the gauge, wiring harness, and instruction manual. Note: the sensor is sold separately.

Key Features and Benefits

- 3-in-1 design that combines water temperature, oil pressure, and voltage monitoring in one gauge, saving dashboard space and simplifying installation

• Built-in alarm system that triggers alerts for oil temp over 108°C, water temp over 95°C, oil pressure under 0.8 bar, and voltage below 11.5V (12V system) or 22V (24V system), helping you prevent engine damage

• IP67 waterproof and dustproof rating that protects the gauge from water and debris, ensuring reliable operation in marine and off-road environments

• 316 stainless steel construction that resists corrosion in humid, acidic, or salty conditions, extending the life of the gauge

• Sensor disconnect alarm that displays "OFF" on the screen when a sensor fails, so you can quickly identify and fix the issue

• High-brightness LED backlight that provides clear visibility in bright sunlight or low-light conditions

Who Is This For

- Boat owners who need a durable, waterproof gauge to monitor engine performance in marine environments

• Off-road and 4x4 enthusiasts who want a reliable dashboard gauge that can handle dust, water, and rough conditions

• Automotive DIYers and mechanics who prefer a single-gauge solution for monitoring multiple engine parameters

• Owners of older vehicles or custom builds who want to add modern digital monitoring without replacing the entire dashboard

Usage Scenario

Mark was on a long fishing trip when his boat's warning light flickered. He had no way to tell if the engine was overheating or just a sensor glitch. After installing this 3-in-1 gauge, he saw the water temperature climbing past 90°C. The built-in alarm went off at 95°C, giving him time to throttle down and check the cooling system. Now he monitors oil pressure and voltage too, all from one gauge.

Micro Comparison

Unlike single-function gauges that require multiple units and separate wiring, this 3-in-1 design combines three critical readings into one compact 52mm display. The IP67 rating and 316 stainless steel housing give it an edge in durability over standard plastic gauges that may not hold up in wet or dusty conditions.

Specifications

- Material: 316 stainless steel + plastic

• Gauge Diameter: 52 mm

• Item Weight: 150 g

• Operating Voltage: 9~32 VDC

• Operating Current: ≤60 mA

• Operating Temperature: -20~70°C

• Storage Temperature: -30~80°C

• Waterproof Rating: IP67

• Interchange Part Number: Boat Water Temperature Gauge

Package Includes

- 1 x Gauge (sensor not included)

• 1 x Wiring Harness

• 1 x Instruction Manual

Why You Will Love It

You get three essential engine monitors in one compact gauge, freeing up dashboard space and simplifying your wiring. The built-in alarms give you peace of mind, alerting you to problems before they become costly repairs. Its rugged, waterproof design means you can trust it on the water or the trail.

Questions and Answers

Question: Does this gauge come with a sensor?

Answer: No, the sensor is sold separately. The package includes the gauge, wiring harness, and instruction manual.

Question: What voltage does this gauge work with?

Answer: It operates on 9 to 32 VDC, so it works with both 12V and 24V electrical systems.

Question: Can I use this gauge in a boat?

Answer: Yes, it has an IP67 waterproof rating and is made from corrosion-resistant 316 stainless steel, making it suitable for marine use.

Question: What does the alarm do?

Answer: The gauge has built-in alarm thresholds. It alerts you when oil temp exceeds 108°C, water temp exceeds 95°C, oil pressure drops below 0.8 bar, or voltage falls below 11.5V (12V system) or 22V (24V system).

Question: Is the backlight adjustable?

Answer: The gauge features a high-brightness LED backlight for clear visibility. The source data does not specify if brightness is adjustable.

Keep your vehicle's battery health in check with this compact and waterproof digital voltage meter. Designed for a wide range of 12V, 24V, and 36V systems, it provides a clear, real-time voltage reading for cars, motorcycles, boats, and more.

This voltmeter is built for simplicity and reliability. Its twist-and-lock design makes installation easy, fitting into a standard 1-1/8 inch hole. The bright LED display is easy to read, even in direct sunlight, and comes in your choice of color to match your vehicle's interior.

The meter is built with waterproof and flame-retardant materials, ensuring it can handle the tough conditions of an engine bay or marine environment. With reverse connection protection, you can install it with confidence, knowing it won't be damaged by a wiring mistake.

Whether you are monitoring a deep-cycle battery in an RV or keeping an eye on your motorcycle's charge, this tool gives you the information you need to avoid unexpected breakdowns. It is a simple, effective way to extend the life of your battery.

Key Features and Benefits

- Waterproof and flame-retardant design that ensures durability and safety in harsh environments.

• Wide voltage range of 5V to 48V that allows you to monitor a variety of battery systems, from small electronics to large vehicles.

• Twist-and-lock mounting system that makes installation quick and secure in a standard panel hole.

• Reverse connection protection that prevents damage to the meter and your vehicle's wiring during installation.

• Choice of LED display colors (Red, White, Blue, Green, Orange) that lets you customize the look to match your vehicle.

Who Is This For

- Car owners who want to keep a constant eye on their battery voltage to prevent unexpected failure.

• Motorcycle and ATV riders who need a compact, weather-resistant gauge for their dashboard.

• Boat and RV owners who rely on deep-cycle batteries and need to monitor charge levels accurately.

Usage Scenario

Mark owns an old camper van he uses for weekend trips. After one too many mornings spent with a dead house battery, he installed this digital voltmeter on his dashboard. Now, a quick glance tells him exactly how much power he has left. Last weekend, he noticed the voltage dropping faster than usual and caught a faulty alternator before it left him stranded. The meter paid for itself on that first trip.

Micro Comparison

Unlike basic analog gauges that are hard to read and often inaccurate, this digital meter gives you a precise numerical reading. It is also fully waterproof and flame-retardant, making it a safer and more durable choice for outdoor and engine bay use compared to standard non-sealed voltmeters.

Specifications

Material: ABS

Measure Voltage: 5 - 48V

Diameter: 36mm / 1.42in

Interface Type: Anode and cathode

Item Color: Black

Lamp Display Color: Red, White, Blue, Green, Orange (Optional)

Special Features: Waterproof

Placement on Vehicle: Front

Size Guide

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x Digital Voltage Meter

• 1 x Nylon Retaining Nut

Why You Will Love It

This voltmeter gives you total peace of mind on the road. Its simple installation and rugged build mean you can set it up once and trust it for years. Seeing your exact battery status at a glance takes the guesswork out of your vehicle maintenance.

Questions and Answers

Question: Can I use this meter on a 48V golf cart battery system?

Answer: Yes, this meter works for systems from 5V up to 48V, including 48V golf carts.

Question: Is the LED display bright enough to see in direct sunlight?

Answer: Yes, the LED digital tube display is designed to be bright and clear, even in direct sunlight.

Question: What size hole do I need to drill to install this meter?

Answer: You need to drill a 1-1/8 inch hole. The meter comes with a nylon retaining nut to hold it in place.

Question: What happens if I connect the wires to the wrong terminals?

Answer: The meter has reverse connection protection, so it will not be damaged if you connect the wires backwards.

Question: Can I use this meter to check the voltage of a 12V car battery?

Answer: Yes, it is perfect for monitoring a 12V car battery and will show you the state of charge between full and discharged.

Replace a broken, faded, or unresponsive central control screen in your Audi A6L, C6, C7, Q5, or Q7 with this direct-fit display screen assembly. Designed as a one-piece replacement unit, it restores full functionality to your vehicle's infotainment system without the need for complex modifications or professional installation.

This screen assembly is built to match the original factory specifications for the listed Audi models. It provides a clear, bright display that integrates seamlessly with your car's existing dashboard layout and control modules. The unit arrives as a complete assembly, ready for installation.

If your current screen has developed dead pixels, touch issues, or physical damage, this replacement offers a straightforward solution. It helps bring back the crisp visuals and responsive interface you expect from your Audi's central control system, saving you the cost and hassle of a full dealership replacement.

Key Features and Benefits

- Direct-fit replacement for Audi A6L C6, C7, Q5, and Q7 models that simplifies the installation process.

• One-piece assembly design that eliminates the need to source separate parts or adapters.

• Restores original display clarity and touch responsiveness to your vehicle's central control screen.

• Compatible with existing factory dashboard and infotainment connections for a plug-and-play experience.

• Durable construction that matches the quality and longevity of the original factory screen.

Who Is This For

- Audi A6L, C6, C7, Q5, and Q7 owners with a cracked, unresponsive, or malfunctioning central display screen.

• Car enthusiasts looking for a cost-effective DIY repair solution instead of a dealership replacement.

• Vehicle owners who want to restore the original look and function of their car's infotainment system.

Usage Scenario

Mark noticed that the center screen in his 2012 Audi Q7 started showing dark spots and stopped responding to touch. Navigation became difficult, and he could no longer adjust audio settings through the display. Instead of booking an expensive service appointment, he ordered this replacement screen assembly. After a weekend of careful work, the new screen fit perfectly into the dashboard slot and connected to the existing wiring. The display was bright, the touch response was immediate, and his infotainment system worked like new again.

Micro Comparison

Many generic replacement screens require separate bezels or adapters, adding cost and complexity to the repair. This one-piece assembly includes everything you need for a direct swap. It is purpose-built for Audi A6L C6, C7, Q5, and Q7 models, which means you do not have to worry about compatibility issues or sourcing additional parts. The result is a cleaner installation and a more reliable connection.

Package Includes

- 1 x Central Control Display Screen Assembly

Why You Will Love It

This replacement screen saves you from a costly dealership visit while restoring the full functionality of your Audi's infotainment system. It is a practical, direct-fit solution that brings back the clear display and responsive touch you rely on every day. You will enjoy a like-new driving experience without the premium price tag.

Questions and Answers

Question: Will this screen work with my 2015 Audi A6L C7?

Answer: Yes, this screen assembly is designed for Audi A6L C6 and C7 models, including the 2015 A6L C7.

Question: Does it come with the frame or bezel?

Answer: Yes, this is a one-piece assembly that includes the screen and the surrounding frame for a direct fit.

Question: Is the installation complicated?

Answer: Installation requires removing the old screen and plugging in the new assembly. Basic mechanical skills and tools are recommended.

Question: Will this fix a completely black screen?

Answer: If the screen is black due to a hardware failure, this replacement assembly should restore display function.

Question: Is this compatible with the Audi Q7 from 2010?

Answer: Yes, this screen assembly is listed as compatible with the Audi Q7, including the 2010 model year.

This 2-inch 52mm voltmeter from Dragon Gauge gives you a clear, real-time read on your vehicle's electrical system. It works with both 12V and 24V setups, measuring from 8 to 16 volts or 16 to 32 volts. The black bezel and metal construction make it a durable and functional addition to any dashboard.

Knowing your battery voltage helps you spot charging issues before they leave you stranded. This gauge connects directly to your electrical system and displays the reading on an easy-to-read face. It fits into a standard 52mm gauge pod or opening for a clean installation.

The gauge is built with a metal housing that holds up to the vibrations and temperature changes inside a vehicle. The front placement gives you a direct line of sight while driving, so you can keep an eye on your electrical health without distraction. Whether you are monitoring a standard 12V system or a 24V setup, this gauge adapts to your needs.

Key Features and Benefits

- Measures 8 to 16 volts for 12V systems and 16 to 32 volts for 24V systems, so it works with cars, trucks, and heavy-duty vehicles.

• Metal housing that resists wear and tear, giving you a long-lasting instrument that stays reliable in tough conditions.

• 2-inch 52mm diameter fits standard gauge pods and dash openings, making installation straightforward and clean.

• Black bezel design that matches most dashboard styles and avoids drawing unwanted attention.

• Front placement on the vehicle allows easy visibility while driving, so you can check voltage at a glance.

Who Is This For

- Car owners who want to monitor their battery and alternator health in real time.

• Truck and van drivers running 24V electrical systems who need a compatible voltage meter.

• DIY mechanics and auto enthusiasts adding gauges to custom dashboards or gauge pods.

• Anyone troubleshooting electrical issues like slow starts, dim lights, or battery drain.

Usage Scenario

Mike noticed his pickup truck was cranking slower than usual on cold mornings. He installed this Dragon Gauge voltmeter in an empty slot on his dashboard. After a short drive, he saw the voltage drop below 12.5 volts while idling, which pointed to a weak alternator. Replacing the alternator fixed the issue, and now Mike checks the gauge every time he starts the engine for peace of mind.

Micro Comparison

Unlike basic warning lights that only tell you something is wrong after it happens, this voltmeter gives you a continuous reading so you can see gradual changes. It supports both 12V and 24V systems, making it more versatile than single-voltage meters. The metal construction also provides better durability compared to plastic-bodied gauges.

Specifications

Material: Metal

Item Height: 40.5 mm

Item Length: 69 mm

Item Width: 73 mm

Item Weight: 98 g

Placement on Vehicle: Front

Package Includes

- 1 x Dragon Gauge Voltmeter

• Mounting hardware

• Wiring instructions

Why You Will Love It

You get instant insight into your vehicle's electrical health without guesswork. The durable metal build means it will keep working through heat, vibration, and daily driving. It is a small addition that gives you big confidence on the road.

Questions and Answers

Question: Will this gauge work in a 12V car?

Answer: Yes, it measures from 8 to 16 volts, which covers standard 12V automotive systems.

Question: Can I use this in a 24V truck?

Answer: Yes, it also measures from 16 to 32 volts, so it works with 24V electrical systems.

Question: What size hole do I need for installation?

Answer: The gauge has a 52mm diameter, so you need a 2-inch or 52mm opening.

Question: Is the housing made of metal or plastic?

Answer: The housing is made of metal for durability.

Question: Does this gauge come with wiring instructions?

Answer: Yes, wiring instructions are included in the package.

Upgrade your BMW driving experience with a modern 12.3-inch LCD digital instrument cluster. This plug-and-play dashboard replaces your factory speedometer with a high-definition display, giving you real-time vehicle data, 3D animations, and a customizable interface. It is designed for a wide range of BMW models including the 5 Series, X3, X4, X5, X6, and 7 Series.

This digital instrument panel brings a fresh, high-tech look to your car’s interior. The 1920x720 HD resolution screen provides clear, sharp visuals for your speed, fuel level, fuel consumption, and more. The blue-light anti-glare screen reduces eye strain, making it easy to read in all lighting conditions. It uses a 4-core T507 processor running on a Linux 5.4 operating system for smooth and responsive performance.

Installation is straightforward with no coding or programming needed. The cluster connects directly to your vehicle’s original harness, and your original odometer continues to work. You can switch between miles and kilometers, and the system supports multiple languages including English, German, French, Spanish, Italian, and Japanese. The dashboard also displays 3D animated door and tire information, road signs, speed limits, and navigation directions.

This instrument cluster is built for durability, with a working temperature range of -20 to 75°C and a storage range of -40 to 85°C. It comes with a 1-year replacement warranty and 2 years of free repairs, plus free firmware, software, and map updates. Please note that this unit does not support manual gear display, HUD, or the display of original car maintenance information.

Key Features and Benefits

- 12.3-inch HD display with 1920x720 resolution that gives you crystal-clear visuals for all driving data

• Plug-and-play installation with no coding or programming required, so you can upgrade your dashboard quickly

• 3D animated display of door and tire information that makes vehicle status easy to understand at a glance

• Blue-light anti-glare screen that reduces eye strain and improves visibility in bright sunlight

• Multi-language support including English, German, French, Spanish, and Japanese for international drivers

• 4-core T507 processor with 1.5GHz main frequency for smooth and responsive system performance

Who Is This For

- BMW owners with models like F10, F15, F16, F25, F02, F07, X3, X4, X5, or X6 who want a modern digital dashboard upgrade

• Drivers who prefer a customizable interface with multiple UI themes and vehicle color options

• Car enthusiasts looking for a high-resolution, anti-glare display that improves both style and function

Usage Scenario

Mark drives a 2015 BMW 5 Series F10. He found the original analog dashboard outdated and hard to read at night. After installing this LCD cluster, he now sees his speed, fuel level, and navigation directions on a crisp, bright screen. The 3D door animation lets him know instantly if a door is open, and he can switch between classic and sport UI themes with a simple press. The upgrade took less than 30 minutes, and Mark enjoys a more modern, connected driving experience every day.

Micro Comparison

Unlike basic replacement dashboards that only show speed and fuel, this digital cluster offers a full-color 3D interface with road sign recognition and navigation support. It is a more advanced upgrade than simple gauge swaps, giving you real-time vehicle data and a customizable look. The plug-and-play design also saves you the time and cost of professional coding or programming.

Specifications

Screen Size: 12.3 inches

Screen Resolution: 1920 x 720

Screen Material: Blu-ray

CPU: 4-core T507 processor, 1.5GHz

Operating System: Linux 5.4

ROM: 8GB eMMC

RAM: 1.024GB

USB: USB 2.0

Working Current: 480mA

Working Voltage: 9V-18V

Standby Current: less than 3mA

Working Temperature: -20 to 75°C

Storage Temperature: -40 to 85°C

Weight: 2.2 kg

Package Includes

- 1 x LCD Digital Instrument Cluster

• 1 x Harness

Why You Will Love It

You will love how this digital dashboard transforms your BMW’s interior with a sleek, modern look. The high-resolution screen and customizable themes let you personalize your driving experience. It is a simple upgrade that adds both style and practical function to your daily drive.

Questions and Answers

Question: Will this work with my 2013 BMW X5 F15?

Answer: Yes, this cluster is compatible with the BMW X5 F15 from 2014 to 2018 with an NBT system.

Question: Do I need to code or program anything for installation?

Answer: No, this is a plug-and-play unit. No coding or programming is needed.

Question: Can I switch the display from kilometers to miles?

Answer: Yes, you can change the mileage unit to miles in the system settings.

Question: Does this dashboard support navigation display?

Answer: Yes, it supports navigation direction display on the screen.

Question: What languages does the system support?

Answer: It supports English, Japanese, Korean, German, Russian, Spanish, Portuguese, French, Italian, and Turkish.

Question: Does this unit support HUD?

Answer: No, HUD is not supported by this instrument cluster.

Question: Will my original odometer still work after installation?

Answer: Yes, the original odometer continues to function as normal.

Question: What is the warranty for this product?

Answer: It includes a 1-year replacement warranty and 2 years of free repairs.

This 12V car electronic turbo boost sensor provides accurate pressure and vacuum readings for your vehicle's boost gauge. It is designed to work seamlessly with 12V electronic digital or pointer turbo boost gauges, helping you monitor engine performance in real time. Whether you are upgrading your setup or replacing a worn part, this sensor delivers reliable data transmission and consistent results.

Crafted from durable metal and PP materials, this boost sensor is built to handle the demands of an engine bay environment. It resists deformation and maintains stable operation under varying pressure and temperature conditions. The sensor's high precision and fast transmission speed ensure that your gauge displays accurate boost levels without delay.

Installation is straightforward and does not require additional tools. The sensor supports direct replacement of faulty or worn sensors, making it a convenient option for DIY enthusiasts and professional mechanics alike. Simply connect it to your 12V turbo boost gauge system and start monitoring your vehicle's performance with confidence.

This sensor is a practical addition for anyone who wants to keep a close eye on their engine's boost pressure. It helps you detect potential issues early and maintain optimal performance during daily driving or track sessions.

Key Features and Benefits

- High precision sensor that provides accurate boost level readings for reliable engine monitoring.

• Fast transmission speed that delivers real-time data to your gauge without lag.

• Durable metal and PP construction that withstands extreme pressure and temperature for long-lasting use.

• Easy installation that supports direct replacement of faulty or worn sensors without extra tools.

• Compatible with 12V electronic digital and pointer turbo boost gauges for versatile use.

Who Is This For

- Car enthusiasts who want to monitor turbo boost levels accurately during performance driving.

• DIY mechanics looking for a straightforward sensor replacement for their boost gauge system.

• Vehicle owners with 12V electronic digital or pointer turbo boost gauges who need a reliable sensor upgrade.

• Drivers who want early detection of boost pressure irregularities to prevent engine issues.

Usage Scenario

Mark noticed his turbo boost gauge was showing erratic readings during his daily commute. After checking the connections, he realized the old sensor was no longer reliable. He ordered this 12V car electronic turbo boost sensor and installed it in under 15 minutes without any special tools. Now his gauge displays steady, accurate boost levels, and he feels more confident monitoring his engine's performance on the road.

Micro Comparison

Unlike basic sensors that may struggle with temperature changes or provide delayed readings, this model is built with metal and PP materials for improved durability and resistance to deformation. Its high precision and fast transmission speed help ensure that your boost gauge shows real-time data, giving you a clearer picture of your engine's performance without lag or inconsistency.

Specifications

Material: Metal & PP

Color: as picture

Function: The sensor can be used in conjunction with a turbo boost gauge to assist in real-time reading of the vehicle's boost level.

Advantages: The sensor has good performance, can be perfectly matched with a 12V turbo boost gauge, high precision, and fast transmission speed.

Application: Fit for 12V Electronic Digital / Pointer Turbo Boost Gauge.

Package Includes

- 1 x Boost Sensor (100% Brand New Never Used Or Installed)

Why You Will Love It

This boost sensor gives you the confidence of accurate boost readings every time you drive. Its durable build means fewer replacements and more reliable performance. Easy installation lets you get back on the road quickly without complicated steps.

Questions and Answers

Question: Will this sensor work with my 12V digital turbo boost gauge?

Answer: Yes, this sensor is designed to work with 12V electronic digital and pointer turbo boost gauges.

Question: Is installation difficult or do I need special tools?

Answer: Installation is straightforward and does not require additional tools. It supports direct replacement of faulty or worn sensors.

Question: What materials is this sensor made from?

Answer: The sensor is made from metal and PP materials for durability and resistance to deformation.

Question: How does this sensor help with engine monitoring?

Answer: It provides high precision and fast transmission speed, helping your gauge display real-time boost levels accurately.

Question: Can this sensor handle high temperature conditions under the hood?

Answer: Yes, the sensor is designed to withstand extreme pressure and temperature conditions typical in an engine bay.

Is your car's dashboard display showing missing lines, faded numbers, or pixelated information? This VDO LCD display screen is designed to restore the clarity of your instrument cluster. It directly replaces the faulty screen in select Audi, Volkswagen, Seat, and Skoda models, bringing back crisp and readable data to your dashboard.

This replacement screen is a practical fix for a common problem in older VDO clusters. Instead of replacing the entire dashboard unit, you can swap out just the LCD screen. This saves you money and keeps your original cluster in place. The screen is built with qualified materials to ensure reliable performance and a clear display for years to come.

Installation requires soldering and careful handling of the circuit board. We strongly recommend having this done by a professional at a local automotive repair shop to avoid damaging the delicate components. With the right installation, this screen will make your dashboard look and function like new again.

Key Features and Benefits

- Direct replacement screen that fixes pixel loss and display fading in VDO clusters

• Compatible with a wide range of Audi, VW, Seat, and Skoda models for versatile use

• Made from qualified materials for long-lasting, clear display performance

• Cost-effective repair solution that avoids replacing the entire dashboard unit

• Compact glass dimensions of 74.7x58.2x2.2 mm for a precise fit in the cluster

Who Is This For

- Audi A2, A3, A4, A6, S3, S4, S6, and TT owners with pixelated or failing VDO displays

• Volkswagen Bora, Golf IV, Passat, Sharan, and Transporter (T4/T5) drivers needing a cluster screen fix

• Seat Alhambra, Ibiza, and Leon (until 2004) owners looking for a dashboard repair

• Skoda Fabia and Octavia owners who want to restore their instrument cluster readability

Usage Scenario

Alex noticed the odometer and temperature gauge on his 2003 Audi A4 were becoming hard to read. Lines of pixels were missing from the center display, making it difficult to check his fuel range. Instead of paying for a costly new cluster, he ordered this VDO LCD screen. He took it to his local mechanic who soldered the new screen into place. Now, Alex can see all his dashboard information clearly again, and the repair cost a fraction of a full cluster replacement.

Micro Comparison

Many car owners think a failing dashboard display means buying a whole new instrument cluster. That is often expensive and unnecessary. This replacement LCD screen targets the root cause of the problem: the display glass itself. By swapping only the screen, you keep your original cluster and save significant money. It is a focused repair solution for a specific and common fault in VDO systems.

Specifications

- Glass Dimension: 74.7x58.2x2.2 mm

• Connect Type: Soldering

• Applied Position: Instrument Cluster / Dashboard

• Storage Temperature: -30°C to 80°C

• Operation Temperature: -20°C to 70°C

• Placement on Vehicle: Car Screen

Package Includes

- 1 x VDO LCD Display Screen

Why You Will Love It

You will love how this simple screen swap brings your dashboard back to life. It is a smart, budget-friendly fix that solves a frustrating problem. Seeing your gauges and information clearly again makes driving more enjoyable and less stressful.

Questions and Answers

Question: Does this screen fix all pixel problems on my Audi A6 dashboard?

Answer: It is designed to repair pixel loss and fading on VDO clusters. It directly replaces the faulty LCD glass.

Question: Can I install this screen myself at home?

Answer: Installation requires soldering. We recommend having a professional automotive repair shop do the work to avoid damaging the circuit board.

Question: Will this screen work in my 2001 Volkswagen Passat?

Answer: Yes, it is compatible with the VW Passat, along with Golf IV, Bora, Sharan, and Transporter T4/T5 models.

Question: What if the screen does not fit my car model?

Answer: Please double-check your car model against the fitment list. It is designed for Audi A2/A3/A4/A6/TT, VW Bora/Golf IV/Passat/Sharan/Transporter, Seat Alhambra/Ibiza/Leon (until 2004), and Skoda Fabia/Octavia.

Question: Does the screen come with a warranty?

Answer: Yes, it comes with a 2-year guarantee, and it is 100% brand new.

This 6-in-1 gauge combines a GPS speedometer, tachometer, fuel level gauge, oil pressure gauge, water temperature gauge, and voltmeter into one compact 85mm unit. It is designed for 12V and 24V systems in cars, boats, and marine applications.

You get all the essential engine and vehicle data on a single, easy-to-read display. The GPS speedometer provides accurate speed readings in km/h, mph, or knots. The tachometer tracks RPM up to 9999, and the fuel level gauge works with standard 0-190 ohm or 240-33 ohm sensors.

Built with a waterproof plastic housing, this gauge is ready for demanding environments. It includes an oil pressure sensor, water temperature sensor, fuel level sensor, and a tachometer sensor, giving you a complete monitoring solution right out of the box.

Setup is straightforward with the included manual. The gauge offers adjustable speed ratio, unit switching, and customizable engine hours and odometer settings. It is a practical upgrade for anyone who needs reliable data without multiple separate gauges.

Key Features and Benefits

- 6 functions in one gauge that saves dashboard space and simplifies wiring

• GPS speedometer with 0-600 km/h range that provides accurate speed data without mechanical connections

• Tachometer up to 9999 RPM that helps you monitor engine performance

• Waterproof plastic housing that withstands moisture and splashes in marine and outdoor use

• Adjustable speed ratio from 1.0 to 360.0 that lets you calibrate for different vehicles and tire sizes

• Compatible with 9-32V DC systems that works on both 12V and 24V electrical setups

Who Is This For

- Boat owners who want a single gauge for engine vitals like speed, temperature, and oil pressure

• DIY car builders upgrading their dashboard with a modern multifunction display

• Marine enthusiasts who need a waterproof gauge for saltwater or freshwater environments

• Off-road vehicle owners looking for GPS speed and engine data in one compact unit

Usage Scenario

Mark runs a small fishing boat on a lake. He used to have three separate gauges for speed, temperature, and fuel level, but they took up too much space and were hard to read at a glance. After installing this 6-in-1 gauge, he now sees everything on one screen. The GPS speedometer works without a pitot tube, and the waterproof design handles spray from the water. He can quickly check his RPM, water temp, and fuel level without looking away from the water for too long.

Micro Comparison

Instead of buying four or five separate gauges that each need their own wiring and mounting hole, this single 85mm unit gives you all the data in one place. It includes the sensors you need, so there is no hunting for compatible parts. The GPS speedometer is more reliable than mechanical speedometers that can jam or wear out over time.

Specifications

Material: Plastic

Size: 85mm diameter / 3.3 in

Weight: 350g / 12.3 oz

Voltage: 9-32V DC

GPS Speedometer Range: 0-600 km/h

Tachometer Range: 0-9999 RPM

Oil Pressure Range: 0-10 Bar

Water Temperature Range: 40-120 Celsius

Fuel Level Range: 0-100%

Oil Pressure Sensor Signal: 1/8NPT

Water Temp Sensor Signal: 1/8NPT, 14mm, 17mm, 21mm

Tacho Sensor Signal: M16/M18

Fuel Level Sensor Output: 0-190 ohm (European) or 240-33 ohm (American)

Fuel Level Sensor Length: 150mm, 200mm, 250mm, 300mm, 350mm, 400mm, 450mm

Fuel Level Sensor Protection: IP67

Fuel Level Sensor Operating Temperature: -40 to 85 Celsius

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x Gauge

• 1 x GPS Antenna

• 1 x Cable

• 1 x Manual

• 1 x Oil Pressure Sensor

• 1 x Water Temp Sensor

• 1 x Tacho Sensor

• 1 x Fuel Level Sensor

Why You Will Love It

You get six critical measurements in one clean gauge, which means less clutter and easier monitoring. The GPS speedometer removes the need for a mechanical cable, and the waterproof build gives you peace of mind on the water. With all sensors included, you can install it and start tracking your engine data right away.

Questions and Answers

Question: Does this gauge work on a 12V car?

Answer: Yes, it works on both 12V and 24V systems, from 9V to 32V DC.

Question: Is the speedometer accurate without a wheel sensor?

Answer: Yes, it uses a GPS antenna for speed, so no wheel sensor is needed.

Question: Can I switch between km/h and mph?

Answer: Yes, you can touch the button after power on to switch between km/h, mph, and knots.

Question: What fuel level sensors does it work with?

Answer: It works with 0-190 ohm European sensors or 240-33 ohm American sensors, and you can select the type during setup.

Question: Does it include all the sensors I need?

Answer: Yes, the package includes the oil pressure sensor, water temp sensor, tacho sensor, and fuel level sensor.

Question: Is the gauge waterproof?

Answer: Yes, the gauge housing is waterproof, and the fuel level sensor has an IP67 rating.

Question: How do I adjust the speed ratio?

Answer: Press and hold the rubber button on the back for 3 seconds to enter setting mode, then press to adjust the value up or down. The gauge saves your setting automatically after 3 seconds.

The Greddi Sirius 7 Colors LCD Head Up Display gives you a clear view of your engine's vital signs without taking your eyes off the road. It displays up to 10 different functions like boost, water and oil temperature, oil pressure, RPM, fuel pressure, and air-fuel ratio all in one compact gauge. With customizable 7-color backlighting, you can match the display to your dashboard or mood.

This universal gauge is designed for 12V vehicles and uses a flat glass, high-definition scale, and a long, narrow pointer for accurate readings and high visibility. The opening and ending modes can be selected from two variations, and you can set arbitrary warning values with a buzzer that has three loudness levels. Peak values and warning data can be stored, reviewed, and cleared, giving you full control over your engine monitoring.

Built with a durable ABS and LED construction, this gauge is made to last. The 7-color backlight lets you switch between colors to suit your style or to help differentiate readings at a glance. Whether you are tuning for performance or just want to keep a close eye on engine health, this gauge delivers reliable data in a clean, easy-to-read format.

Installation is straightforward for DIY enthusiasts, but please allow the engine and exhaust system to cool down before starting. This gauge is designed for 12V vehicles only, and do not disassemble or modify the unit as it will void the warranty and may cause damage.

Key Features and Benefits

- Displays 10 functions including boost, water and oil temp, oil pressure, RPM, fuel pressure, and air-fuel ratio that gives you a complete engine overview at a glance

• 7-color selectable backlight that lets you customize the look to match your vehicle interior or personal preference

• Flat glass and high-definition scale with long narrow pointer that provides accurate readings and high visibility even in bright conditions

• Customizable warning values with three-level buzzer that alerts you to potential issues before they become serious problems

• Data storage for peak and warning values that allows you to review and clear performance data after each drive

• Two opening and ending mode variations that give you flexibility in how the gauge powers on and off

Who Is This For

- Car enthusiasts who want to monitor engine performance parameters like boost, oil pressure, and fuel ratio in real time

• Tuning and track day drivers who need precise data to optimize engine output and prevent damage during high-stress driving

• DIY mechanics who prefer a universal gauge that can be installed in front of the driver's seat for easy visibility

• Owners of 12V vehicles looking to upgrade their dashboard with a modern, multi-function LCD display

Usage Scenario

Mark just finished installing a new turbo kit on his sedan. Before taking it to the track, he wanted to make sure his engine was running at safe temperatures and pressures. He mounted the Greddi Sirius gauge in front of his seat and set the warning buzzer to alert him if oil pressure dropped too low. On his first test run, the gauge showed his water temp climbing higher than expected. The warning buzzer went off, and Mark pulled over to let the engine cool. Without the gauge, he might have pushed the engine too hard and caused serious damage. Now he drives with confidence knowing he has real-time data at a glance.

Micro Comparison

Unlike basic single-function gauges that only show one parameter, the Greddi Sirius packs 10 readings into one compact display. Many multi-gauges require separate sensors and complex wiring, but this unit keeps things simple with a single housing and universal fit for 12V vehicles. The 7-color backlight also gives you a level of customization that most standard gauges lack, letting you match your dashboard lighting or create a unique look.

Specifications

- Material: ABS + LED

• Power Supply Voltage: 10V to 15V DC (12V vehicles only)

• Current Consumption: +B line MAX 120mA, IGN line MAX 120mA, ILM line MAX 2mA

• Item Weight: 0.55 KG

• Item Length: 60 cm / 23.6 in

• Item Width: 60 cm / 23.6 in

• Placement on Vehicle: In front of the driver's seat

• Special Features: Universal fit

Package Includes

- 1 x Greddi Sirius 7 Colors LCD Head Up Display Gauge

• 1 x Wiring harness

• 1 x User manual

Why You Will Love It

You get a complete engine monitoring station in one sleek gauge that fits right in front of you. The 7-color backlight lets you personalize your dashboard, while the warning buzzer gives you peace of mind on every drive. It is a smart upgrade for anyone who cares about engine performance and safety.

Questions and Answers

Question: Can this gauge be used on a 24V vehicle?

Answer: No, this gauge is designed for 12V vehicles only. Do not install it on a 24V system.

Question: How do I change the backlight color?

Answer: You can select from 7 different colors using the gauge's settings menu. The exact method is described in the user manual.

Question: Does the gauge come with all necessary sensors?

Answer: The gauge includes the display unit and wiring harness. Sensors for parameters like oil pressure and water temp may need to be purchased separately depending on your vehicle.

Question: Can I set different warning values for each function?

Answer: Yes, you can set arbitrary warning values for each monitored parameter. The buzzer will alert you when a value goes beyond your set limit.

Question: Is the display bright enough to read in direct sunlight?

Answer: Yes, the flat glass and high-definition scale are designed for high visibility even in bright conditions. The 7-color backlight also helps improve readability.

Question: How do I clear the peak value data?

Answer: You can review and clear stored peak values through the gauge's menu. The user manual provides step-by-step instructions.

Question: Will this gauge work with aftermarket ECUs?

Answer: The gauge is universal and designed for 12V vehicles. Compatibility with aftermarket ECUs depends on the sensor output and wiring, but it is generally suitable for most setups.

Keep track of your engine's performance with this digital tachometer and hour meter. It features a clear LCD display and is designed for a wide range of spark ignition engines, from motorcycles and boats to chainsaws and pit bikes. This tool helps you monitor RPMs and track engine run time for easier maintenance scheduling.

This compact digital gauge is built for simplicity and reliability. It uses a built-in battery that lasts for years and wraps around your spark plug wire for easy installation. The large screen makes it easy to read your engine's RPMs and total running hours at a glance, helping you stay on top of service intervals.

The hour meter tracks run time up to 10,000 hours before resetting, while the tachometer can read up to 99,999 RPM. You can program maintenance reminders directly on the device, so you know exactly when to change the oil or perform other routine services. It works with both two-stroke and four-stroke gas engines.

Built with a durable ABS plastic housing, this tachometer is ready for the vibrations and conditions of engines on land or water. The anti-flicker design ensures a stable reading, and the simple two-button interface makes setup straightforward. It is a practical addition for anyone who wants to monitor engine health and plan maintenance with precision.

Key Features and Benefits

- Digital tachometer and hour meter in one unit that provides both RPM readings and total run time tracking for complete engine monitoring.

• Large LCD screen that makes it easy to read engine data, even in bright or low-light conditions.

• Programmable maintenance reminder that alerts you when service is due, helping you keep your engine running smoothly.

• Built-in battery with a 2-3 year lifespan that offers reliable, long-term operation without external power connections.

• Anti-flicker technology that ensures a stable and accurate RPM reading while the engine is running.

• Simple two-button setup that allows you to select the engine type and configure settings without complicated wiring.

Who Is This For

- Boat owners who need to track hours on an outboard or inboard marine engine for scheduled maintenance.

• Motorcycle and pit bike riders who want to monitor RPMs and engine run time for performance tuning or service planning.

• Chainsaw and lawn equipment users who prefer to log engine hours for oil changes and spark plug replacements.

• ATV and snowmobile owners looking for a durable, weather-resistant gauge to keep tabs on engine usage.

Usage Scenario

Mark owns a small fishing boat with an outboard motor. He used to guess when to change the oil, often doing it too early or too late. After installing this digital tachometer and hour meter, he simply wraps the cable around the spark plug wire. Now he sees the exact run time on the LCD display. When the programmed service icon appears, he knows it is time for an oil change. This small device gives him confidence that his engine is well maintained and ready for every trip.

Micro Comparison

Unlike analog gauges that can be hard to read or lack hour tracking, this digital unit combines both functions in one compact package. Many basic tachometers only show RPMs without logging run time. This model gives you both, plus a programmable maintenance reminder, making it a more complete tool for engine care.

Specifications

- Material: ABS plastic

• Color: Black

• Item Size: 72 mm x 46 mm x 20 mm / 2.8 in x 1.8 in x 0.8 in

• Item Weight: 66 g / 2.3 oz

• Battery Life: 2-3 years

• RPM Range: Up to 99,999 RPM

• Hour Meter Range: Up to 10,000 hours (resets to zero)

• Compatible Engines: Two-stroke and four-stroke spark ignition engines (motorcycles, ATVs, snowmobiles, outboards, chainsaws, pit bikes, boats)

Package Includes

- 1 x Digital Engine Tachometer and Hour Meter

Why You Will Love It

You will appreciate how easy it is to install and use. No complicated wiring is needed. Just wrap the cable around the spark plug wire and start tracking. The large LCD screen gives you clear data at a glance, and the maintenance reminder takes the guesswork out of engine service. It is a simple upgrade that helps you keep your engine in top condition.

Questions and Answers

Question: How do I install this tachometer on my motorcycle?

Answer: Simply wrap the black sensor cable around the spark plug wire. Then use the two buttons to set the engine type and your preferred RPM mode. No direct electrical connection is needed.

Question: Can this hour meter work on a boat with an outboard engine?

Answer: Yes, it works on any spark ignition engine, including outboard motors. It is suitable for marine use as long as it is mounted in a dry location.

Question: Does this gauge come with a battery already installed?

Answer: Yes, it has a built-in battery that is pre-installed. The battery is designed to last 2-3 years under normal use.

Question: Can I set a service reminder for oil changes?

Answer: Yes, you can program a maintenance hour interval. When the engine reaches that run time, a service icon will appear on the display to remind you.

Question: Will this work on a 2-stroke chainsaw engine?

Answer: Yes, it works on both two-stroke and four-stroke gas engines, including chainsaws. Just wrap the cable around the spark plug wire and set the engine type.

Upgrade your Jeep Wrangler JK (2011-2017) with a smart digital instrument cluster that replaces your old analog gauges. This 12.3-inch HD screen delivers a modern driving experience with a 2-second rapid startup, off-road data tracking, and full compatibility with your vehicle's original systems.

This digital instrument cluster is designed to transform how you interact with your Jeep. It boots up in just 2 seconds, so you get instant access to your speed, fuel level, and critical vehicle data without waiting. The display features a 1920x720 resolution IPS screen that stays clear and bright even under direct sunlight, with a brightness of 800 nits. It uses an optimized Linux system for stable, lag-free performance, unlike standard Android-based units.

The cluster goes beyond basic gauges. It offers five terrain modes including road, mud, sand, snow, and rock. Each mode automatically adjusts the interface to highlight the most relevant data for your driving conditions. You can monitor real-time body inclination angles, altitude, and turbo pressure when paired with an OBD module. The system also integrates with tire pressure sensors to display live pressure and temperature for all four tires, with audible alerts for any issues.

Installation is straightforward and non-destructive. The cluster connects directly to your vehicle's existing wiring harness with no cutting or programming required. It retains full compatibility with your Jeep's original functions, including fault lights, ACC status, radio channels, and steering wheel controls. The unit operates reliably in extreme temperatures from -40°C to +80°C, making it suitable for off-road adventures in any climate.

Key Features and Benefits

- 12.3-inch HD IPS display at 1920x720 resolution that delivers sharp, clear visuals with a 60fps refresh rate for smooth data updates

• 2-second ultra-fast startup with an optimized Linux system that eliminates lag and provides instant access to driving information

• Five preset off-road modes including road, mud, sand, snow, and rock that automatically reconfigure the interface to show the most important data for each terrain

• Real-time off-road data hub displaying body inclination, altitude, turbo pressure, and tire pressure with live curves and audible alarms for safety

• 100 percent compatibility with original vehicle functions including fault lights, ACC status, radio channels, and steering wheel controls for a seamless upgrade

• Industrial-grade durability with wide temperature operation from -40°C to +80°C and low power consumption of 0.8A to 1.5A for continuous use

• 30-minute non-destructive installation with plug-and-play wiring harness and no cutting or programming required

Who Is This For

- Jeep Wrangler JK owners from 2011 to 2017 who want to replace their outdated analog instrument cluster with a modern digital display

• Off-road enthusiasts who need real-time data on body angles, tire pressure, and altitude during trail driving

• Drivers who want a faster, more responsive instrument cluster that boots instantly and provides smooth performance without lag

• Jeep owners looking for a lossless upgrade that preserves all original vehicle functions and steering wheel controls

Usage Scenario

Mark takes his 2015 Jeep Wrangler JK Rubicon on a weekend trail run through rocky terrain. Before the upgrade, his old analog gauges gave him basic speed and fuel information but nothing about his vehicle's angle or tire condition. With the new digital cluster, he switches to rock mode and sees his body pitch and roll angles displayed clearly. A red warning appears when the tilt exceeds 15 degrees, helping him avoid a dangerous situation. The tire pressure display shows a slow leak in the rear right tire, so he stops to fix it before it goes flat. After the trail, he switches to highway mode for the drive home, enjoying a clean, minimalist layout that shows only speed and fuel range.

Micro Comparison

Traditional analog instrument clusters in the Jeep Wrangler JK are slow to respond and offer limited information. This digital cluster boots in 2 seconds, provides a full HD display, and gives you real-time off-road data that analog gauges simply cannot show. It is a direct replacement that keeps all original vehicle functions intact, so you get a modern upgrade without losing compatibility.

Specifications

Screen Size: 12.3 inches

Resolution: 1920 x 720

Display Type: IPS

Item Height: 20 cm / 7.9 in

Item Length: 30 cm / 11.8 in

Item Width: 20 cm / 7.9 in

Item Weight: 2 kg / 70.5 oz

Power Consumption: 0.8A to 1.5A

Operating Temperature: -40°C to +80°C / -40°F to 176°F

Compatibility: Jeep Wrangler JK 2011-2017 (Sport, Sahara, Rubicon)

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x Instrument panel host

• 1 x Original car pair wiring harness

• 1 x Chinese and English instruction manual

Why You Will Love It

This digital cluster gives you a modern, high-tech dashboard that makes every drive feel like an upgrade. You get instant startup, crystal-clear visuals, and the confidence of knowing your vehicle's exact status on and off the road. It is a simple, non-destructive upgrade that transforms your Jeep's interior while keeping everything you love about the original.

Questions and Answers

Question: Will this digital cluster fit my 2013 Jeep Wrangler JK?

Answer: Yes, this cluster is compatible with all Jeep Wrangler JK models from 2011 to 2017, including Sport, Sahara, and Rubicon trims.

Question: Do I need to cut any wires to install this cluster?

Answer: No, installation is completely non-destructive. The wiring harness plugs directly into your vehicle's existing connectors with no cutting or programming needed.

Question: Does this cluster work with my original steering wheel controls?

Answer: Yes, the cluster retains full compatibility with your steering wheel buttons for page up, page down, reset, and menu settings.

Question: Can I see my tire pressure on this display?

Answer: Yes, when paired with compatible tire pressure sensors, the cluster displays real-time pressure and temperature for all four tires with audible alerts for leaks or overpressure.

Question: How long does the cluster take to start up?

Answer: The cluster boots in about 2 seconds after power-on, and it responds synchronously with ignition start in under 2.5 seconds.

Keep an eye on your engine’s vital signs with this 2-in-1 digital gauge that shows water temperature and voltage on a single, easy-to-read LCD screen. Designed for 12V and 24V vehicles, it helps you spot cooling or charging issues before they cause trouble.

This gauge combines a water temperature meter and a voltmeter in one compact unit. The digital display gives you clear, real-time readings so you can monitor engine coolant temperature and battery or alternator voltage at a glance. It works with a included water temperature sensor that installs directly into your radiator hose or adapter, making setup straightforward for most cars, trucks, or off-road vehicles.

The sunshield design improves visibility in bright conditions, so you can read the display even on sunny days. The plastic shell is built to handle the bumps and vibrations of daily driving, while the simple wiring connects to your vehicle’s power supply. With an alarm that flashes when the temperature goes above 95 degrees Celsius, you get an early warning system for overheating.

Whether you are upgrading your dashboard or adding a monitor for peace of mind, this gauge gives you the data you need without clutter. It is a practical tool for anyone who wants to keep their engine running smoothly.

Key Features and Benefits

- Digital LCD display that shows water temperature and voltage together for quick monitoring

• Flashing alarm alerts you when coolant temperature exceeds 95 degrees Celsius to help prevent overheating

• Sunshield design improves screen readability in direct sunlight for safer driving

• Works with both 12V and 24V electrical systems for broad vehicle compatibility

• Includes a water temperature sensor with M10 thread that fits standard radiator hose adapters

• Stable and precise readings with +/-1% accuracy for reliable data you can trust

• Easy installation with color-coded wiring and a 300 cm cable for flexible placement

Who Is This For

- Car owners who want a simple way to monitor engine temperature and battery voltage

• Truck and van drivers operating 12V or 24V systems who need a dual-function gauge

• Off-road and overlanding enthusiasts looking for a durable, easy-to-read monitor

• DIY mechanics installing an aftermarket gauge in a custom dashboard or gauge pod

Usage Scenario

Mark was driving his work van through a long stretch of highway when he noticed the factory temperature gauge was acting sluggish. He had installed this digital 2-in-1 gauge the previous weekend, running the sensor into the radiator hose adapter and wiring it to the fuse box. Halfway up a steep grade, the display flashed, and the temperature reading climbed past 95 degrees Celsius. Mark pulled over immediately, let the engine cool, and found a small coolant leak. The early warning saved him from a blown head gasket and an expensive tow bill.

Micro Comparison

Unlike separate gauges that take up more dashboard space and require extra wiring, this 2-in-1 unit combines temperature and voltage readings in a single compact display. Many basic temperature gauges lack a voltage readout or an alarm feature, so you would not know about an overheating condition until it is too late. This gauge gives you both critical data points and a flashing alert, all in one package that is simpler to install.

Specifications

Digit: 3 Digit

Accuracy: +/-1%

Material: Plastic Shell

Power Supply: DC 9V - 36V

Cable Length: approx. 300 cm / 118.1 in

Product Size: 100 mm x 56 mm / 3.9 in x 2.2 in

Temperature Sensor Screw: M10

Temperature Sensor Screw Diameter: 10 mm / 0.4 in

Water Temperature Measurement Range: -10 to 110 degrees Celsius / 14 to 230 degrees Fahrenheit

Water Temperature Alarm Value: > 95 degrees Celsius / 203 degrees Fahrenheit

Package Includes

- 1x LCD 2-in-1 Car Gauge (Voltage & Water Temperature Gauge)

• 1x Water Temperature Sensor (10 mm)

Why You Will Love It

You get two essential engine monitors in one small gauge, saving space and installation effort. The bright digital display and flashing alarm give you real-time confidence on every drive. It is a practical upgrade that helps you catch problems early and keep your vehicle on the road longer.

Questions and Answers

Question: Can this gauge work on a 12V car battery?

Answer: Yes, it works on both 12V and 24V electrical systems, so it is suitable for most cars, trucks, and vans.

Question: What size thread does the temperature sensor use?

Answer: The sensor uses an M10 thread with a 10 mm diameter, which fits standard radiator hose adapters.

Question: Does the gauge come with a wiring harness or just bare wires?

Answer: It comes with color-coded wires (red for power positive, red-black for power negative) that are about 300 cm long for flexible routing.

Question: Can I mount this gauge in a standard 52 mm gauge pod?

Answer: The gauge body is 100 mm by 56 mm, so it is not a standard 52 mm round gauge. You will need a rectangular mounting space or a suitable pod.

Question: What temperature triggers the alarm?

Answer: The alarm flashes when the water temperature reading goes above 95 degrees Celsius (203 degrees Fahrenheit).

Question: Does the sensor need to be grounded separately?

Answer: The sensor connects to the gauge through its wiring. The power negative wire handles the ground connection for the gauge itself.

Question: Is this gauge waterproof or splash-proof?

Answer: The gauge has a plastic shell but is not rated as fully waterproof. It is best installed in a dry location inside the cabin.

This 85mm tachometer combines a clear LCD hour meter with a seven-color LED backlight, giving you a precise readout of your engine's RPM and total running hours. It is built for marine, automotive, and diesel generator applications where reliable monitoring matters.

You can switch between seven backlight colors to match your dashboard or personal preference. The display shows both current RPM and accumulated engine hours up to 99,999.9 hours, so you always know when maintenance is due. The gauge is protected by an IP67 waterproof and dustproof rating, making it suitable for damp or dusty environments.

Installation is straightforward thanks to the multi-plug socket connection. The 316 stainless steel bezel and curved anti-fog glass add durability and prevent condensation from obscuring the display. This tachometer works with 4-cylinder gasoline and diesel engines found in cars, trucks, boats, and generators.

Key Features and Benefits

- Seven-color LED backlight lets you customize the look to match your dashboard or mood

• LCD hour meter tracks engine run time up to 99,999.9 hours for easy maintenance scheduling

• IP67 waterproof and dustproof rating protects the gauge in marine and outdoor conditions

• 316 stainless steel bezel with curved anti-fog glass resists corrosion and prevents fogging

• Multi-plug socket connection simplifies wiring and installation

• Works with 4-cylinder engines in cars, trucks, boats, and diesel generators

Who Is This For

- Boat owners who need a waterproof tachometer with hour tracking for outboard or inboard engines

• Car and truck enthusiasts upgrading their dashboard with a modern, color-adjustable RPM gauge

• Diesel generator operators who rely on accurate RPM and engine hour readings for scheduled service

Usage Scenario

Mike runs a small fishing charter and his old tachometer failed mid-season. He installed this 85mm gauge on his center console. The seven-color backlight lets him choose a soft blue for night trips, while the hour meter reminds him exactly when the outboard needs an oil change. The IP67 seal keeps rain and spray out, and the anti-fog glass stays clear even on humid mornings.

Micro Comparison

Unlike basic tachometers that only show RPM with a single backlight color, this gauge adds a built-in LCD hour meter and seven selectable colors. The IP67 waterproof rating and anti-fog curved glass make it more durable than standard automotive tachometers in wet or humid environments. The 316 stainless steel bezel also resists corrosion better than painted or chrome finishes.

Specifications

- Size: 85mm diameter

• Material: Stainless steel and glass

• Number of cylinders supported: 4

• Working voltage: 9-32 VDC

• Working current: less than 120 mA

• Backlight: 7 colors (red, yellow, orange, green, blue, purple, white)

• Engine hour range: 0.0 to 99,999.9 hours

• Working temperature: -30 to 70°C / -22 to 158°F

• Storage temperature: -40 to 85°C / -40 to 185°F

• Waterproof and dustproof grade: IP67

• Signal type: Pulse

• Indicating ranges available: 0-3000, 0-4000, 0-6000, 0-7000, 0-8000 RPM

Package Includes

- 1 x Boat Tachometer

• 1 x Cable

• 1 x Installation guide

• Or 1 x RPM Sensor (depending on variant)

Why You Will Love It

You can finally match your gauge lighting to the rest of your dashboard with a simple button press. The built-in hour meter removes the guesswork from engine maintenance schedules. And the rugged waterproof design means you can trust this tachometer on the water, on the road, or at the job site.

Questions and Answers

Question: Can this tachometer be used on a 2-cylinder engine?

Answer: This gauge is designed for 4-cylinder engines only. It may not read correctly on 2-cylinder or 6-cylinder engines.

Question: How do I change the backlight color?

Answer: You can cycle through the seven colors (red, yellow, orange, green, blue, purple, white) using a button on the gauge or the included wiring.

Question: Is the hour meter resettable?

Answer: The hour meter accumulates total engine run time and is not resettable by the user. It helps track overall engine usage.

Question: Does this gauge work with a 12V or 24V system?

Answer: Yes, it operates on 9-32 VDC, so it works with both 12V and 24V electrical systems found in cars, trucks, and boats.

Question: What does the IP67 rating mean for installation?

Answer: IP67 means the gauge is fully protected against dust and can be submerged in up to 1 meter of water for 30 minutes. It is safe for exposed marine installations.

Question: Can I install this on a diesel generator?

Answer: Yes, the gauge works with 4-cylinder gasoline and diesel engines, including diesel generators, as long as the engine produces a pulse signal.

Monitor your engine's air-fuel mixture in real time with a 52mm smoked gauge and wideband O2 sensor. This kit gives you a clear digital readout of your air-fuel ratio, helping you tune for performance, fuel economy, or both. The smoked lens looks subtle during the day and lights up with a bright LED display at night.

This gauge is designed for 12V cars and includes everything you need for installation. The wideband oxygen sensor provides accurate readings from 10:1 to 20:1, so you can see exactly what your engine is doing under load or at idle. The smoked tint gives your dashboard a clean, race-inspired look without being flashy when the car is off.

Installation is straightforward with the included English manual and mounting hardware. The gauge connects to the sensor with clearly labeled wires, and the sensor itself fits standard M18x1.5 bungs. Whether you are tuning a modified engine or just want to keep an eye on your fuel mixture, this kit gives you the data you need at a glance.

Key Features and Benefits

- 52mm gauge size that fits standard dashboard pods and mounting holes

• Smoked lens that hides the display during the day and reveals bright LED numbers at night

• Wideband O2 sensor with a measurement range of 10:1 to 20:1 for accurate tuning feedback

• Includes English manual and all mounting hardware for a straightforward installation

• Works with 12V DC electrical systems common in most cars and trucks

Who Is This For

- Car enthusiasts tuning their engine for performance or fuel economy

• DIY mechanics who want real-time air-fuel ratio data without a full standalone system

• Drivers of modified or turbocharged vehicles that need precise mixture monitoring

• Anyone replacing a failed or inaccurate narrowband gauge with a wideband upgrade

Usage Scenario

Mark had just finished installing a new turbo kit on his daily driver. The car felt strong, but he had no way to know if the fuel mixture was safe under boost. He mounted this 52mm gauge in his A-pillar pod, connected the sensor to the exhaust bung, and within minutes he could see his air-fuel ratio climbing into a safe range at full throttle. Now he drives with confidence, knowing he can spot a lean condition before it causes damage.

Micro Comparison

Basic narrowband gauges only tell you if the mixture is rich or lean, not by how much. This wideband kit gives you a precise numeric readout from 10:1 to 20:1, so you can tune with accuracy. The smoked lens also looks cleaner than a bright chrome bezel, blending into the dashboard when not in use.

Specifications

- Gauge size: 52 mm / 2.0 in

• Working voltage: DC 12V

• Signal line voltage: 0-1V

• Sensor thread: M18 x 1.5

• Sensor wrench size: 22 mm / 0.9 in

• Measurement range: 20:1 to 10:1 air-fuel ratio

• Output voltage: maximum ≥900 mV, minimum ≤50 mV

• Response time (600 mV to 300 mV): ≤100 ms

• Response time (300 mV to 600 mV): ≤100 ms

• Starting time: ≤10 s

• Heating resistance: 8.5 to 9.5 Ω

• Internal resistance: 200 to 300 Ω

• Material: plastic gauge housing

• OEM reference: 0258006028

Package Includes

- 1x air-fuel ratio gauge

• 1x wideband O2 oxygen sensor

• 1x English installation manual

• Mounting and installation hardware

Why You Will Love It

You get professional-grade wideband monitoring without the complex wiring of a standalone system. The smoked lens keeps your interior looking clean, and the bright LED display is easy to read at night. It gives you the peace of mind that comes from knowing exactly what your engine is doing.

Questions and Answers

Question: Does this gauge work with any 12V car?

Answer: Yes, it is designed for 12V DC electrical systems found in most cars, trucks, and SUVs.

Question: Is the sensor a wideband or narrowband type?

Answer: It is a wideband O2 sensor with a measurement range of 10:1 to 20:1 air-fuel ratio.

Question: What thread size does the sensor use?

Answer: The sensor uses a standard M18 x 1.5 thread, which fits most aftermarket bungs.

Question: Does the gauge come with installation instructions?

Answer: Yes, the kit includes an English user manual and all necessary mounting hardware.

Question: Can I use this gauge with a turbocharged engine?

Answer: Yes, wideband gauges are ideal for turbo and supercharged engines to monitor fuel mixture under boost.

Question: How do I connect the wires?

Answer: The white wires connect to the heater circuit (one to ground, one to ACC power), the black wire is the signal, and the gray wire is the signal ground. The gauge green wire connects to the sensor black wire.

Keep your engine running at its best with this complete set of 52mm car gauges. Whether you need to monitor water temperature, boost pressure, oil temperature, or RPM, this kit gives you the data you need to drive with confidence. Each gauge uses a stepper motor for smooth pointer movement, and the pointer resets to zero after power is connected.

This versatile gauge set works with any 12V vehicle. You can choose from individual gauges like the water temperature gauge with sensor, boost gauge in bar or psi, oil temperature gauge, oil pressure gauge, voltmeter, tachometer, vacuum gauge, air fuel ratio gauge, and exhaust gas temperature gauge. Each option comes with the necessary sensor, line, or manual to get you started.

Installation is straightforward for most DIY enthusiasts. The gauges fit standard 52mm openings and include English instructions. The boost gauge comes with a nylon pressure line and adaptor. The water and oil temperature gauges include a 1/8 NPT sensor. The tachometer works with 4, 6, and 8 cylinder gasoline engines. Everything is designed for a clean, professional look on your dashboard or gauge pod.

Wholesale and drop shipping are both supported. For bulk orders, you can get a discount or free express shipping that takes only 3-7 days. For drop shipping, orders can be sent directly to your customers without any branding or store information.

Key Features and Benefits

- Stepper motor movement that provides smooth pointer action and auto zero after power on

• 52mm standard size that fits most gauge pods and dash openings

• Multiple gauge types available so you can monitor water temp, oil temp, boost, voltage, RPM, and more

• Includes sensor or pressure line with each gauge for easier installation

• Works with 12V vehicles only, making it a universal fit for most cars and trucks

Who Is This For

- Car enthusiasts who want to monitor engine performance and catch issues early

• DIY mechanics installing aftermarket gauges in their own vehicle

• Shop owners or resellers looking for a reliable gauge set for customer builds

• Off-road or track drivers who need real-time data on boost, temp, and oil pressure

Usage Scenario

Mark just finished installing a turbocharger on his project car. He needed a way to keep an eye on boost pressure and water temperature to avoid engine damage. He picked up a boost gauge and water temp gauge from this set. After mounting them in his custom gauge pod and connecting the sensors, he could see his boost hitting 2 bar and his water temp staying within the safe range. Now he drives with peace of mind knowing his engine is under control.

Micro Comparison

Many universal gauges use cheap air core movements that can be inaccurate or slow to respond. This set uses stepper motors instead, which give you smoother pointer movement and better accuracy. The auto-zero feature after power on also means you don't have to manually adjust the needle. Compared to OEM gauges that only show basic info, this kit gives you a full picture of what your engine is doing.

Specifications

- Gauge diameter: 52 mm / 2.05 in

• Material: Plastic shell

• Voltage: 12V DC

• Boost gauge range: -1-0-2 bar or -1-0-3 bar (depending on choice)

• Boost gauge psi range: 0-30 in.Hg / 0-35 PSI

• Water temp gauge range: 40-140 degrees Celsius

• Oil temp gauge range: 40-140 degrees Celsius

• Oil pressure gauge range: 0-100 PSI

• Voltmeter range: 8-18V

• Tachometer range: 0-10000 RPM (for 4, 6, 8 cylinder gasoline engines)

• Exhaust gas temp gauge range: 300-1300 degrees Celsius

Package Includes

- 1 x Gauge of your choice (boost, water temp, oil temp, oil pressure, voltmeter, tachometer, vacuum, AFR, or EGT)

• 1 x Sensor or pressure line (depending on gauge type)

• 1 x English user manual

Why You Will Love It

Having a full set of gauges makes you feel more connected to your car. You can spot problems before they turn into expensive repairs. The clean 52mm design looks great on any dashboard, and the stepper motor movement gives you that professional feel every time you look at the needle.

Questions and Answers

Question: Does this gauge set work with diesel engines?

Answer: The tachometer is designed for gasoline 4, 6, and 8 cylinder engines. The other gauges (water temp, boost, oil temp, etc.) should work with any 12V vehicle, including diesel.

Question: Does the boost gauge include everything I need to install it?

Answer: Yes, the boost gauge comes with a nylon pressure line (2m for bar version or 1.84m for psi version) and one adaptor, plus an English manual.

Question: Can I buy just one gauge instead of the whole set?

Answer: Yes, each gauge type is sold individually. Choose the one you need from the options.

Question: How do I wire these gauges to my car?

Answer: Each gauge comes with wiring instructions in the manual. They are designed for 12V systems and typically connect to a power source, ground, and signal wire from the sensor.

Question: Will the pointer move right away when I turn on the car?

Answer: The pointer will reset to zero after power is connected. If it does not return to zero immediately, that is normal for stepper motor gauges. It will self-calibrate after power is applied.

Keep an eye on your fuel level and battery voltage at the same time with this 2-in-1 digital gauge. It combines a voltmeter and a fuel gauge in one compact display, making it a practical addition to any car, boat, or RV dashboard. The included A5 oil tank level sensor works with standard 0-190 ohm senders for accurate readings.

This gauge is built to handle tough conditions. It operates on DC 9-36V power and works in temperatures from -40 to 50 degrees Celsius. The voltage meter measures from 10 to 39V with a precision of plus or minus 0.1 percent. It also includes a flashing alarm that triggers when voltage drops below 10V, goes between 16 and 20V, or rises above 31V, helping you catch electrical issues early.

The fuel level sensor measures resistance from 0 to 190 ohms, with empty at 0 ohms and full at 190 ohms. It comes in lengths from 100 to 600 mm and is rated IP67 for dust and water resistance. The sensor can handle operating temperatures from -40 to 85 degrees Celsius, so it performs reliably in harsh environments. The gauge also supports oil resistance ranges from 5 to 1000 ohms with a measurement accuracy of plus or minus 1 percent and flashes an alarm when fuel drops below 10 percent.

Installation is straightforward with the 5-hole mounting design. The sensor uses five M5 screws and a 2 mm thick gasket for a secure fit. Whether you are upgrading an old gauge or setting up a new system, this kit gives you the essential tools to monitor both fuel and voltage in one glance.

Key Features and Benefits

- 2-in-1 gauge design that displays voltage and fuel level together, so you do not need separate instruments on your dashboard.

• Wide voltage measurement range from 10 to 39V with high accuracy of plus or minus 0.1 percent, giving you reliable electrical system monitoring.

• Flashing alarm for low voltage, mid-range voltage, and high voltage conditions, alerting you to potential battery or alternator problems.

• Fuel level sensor with 0-190 ohm signal range and IP67 protection, ensuring accurate readings even in wet or dusty environments.

• Broad operating temperature range from -40 to 85 degrees Celsius for the sensor, making it suitable for extreme climates.

Who Is This For

- Boat owners who want a single gauge to monitor both fuel level and battery voltage on the water.

• Car enthusiasts upgrading their dashboard with a digital display that provides real-time electrical and fuel data.

• RV and campervan users who need reliable fuel level monitoring and voltage alerts during long trips.

• DIY mechanics and technicians installing a replacement gauge system for older vehicles or custom builds.

Usage Scenario

Mark runs a small fishing boat and was tired of guessing how much fuel he had left. After installing this 2-in-1 gauge, he can see both his fuel level and battery voltage at a glance. On a recent trip, the voltage alarm flashed when his alternator started failing, giving him enough time to head back to the dock before the battery died. The fuel level sensor also helped him plan his trips better, so he never runs out of gas in the middle of the lake.

Micro Comparison

Unlike basic fuel gauges that only show fuel level, this unit combines a voltmeter and fuel gauge in one device. It also includes voltage alarms that many standalone fuel meters lack, giving you early warnings for electrical problems. The IP67-rated sensor adds extra durability compared to sensors with lower protection ratings.

Specifications

- Material: LCD Gauge

• Working voltage: DC 9-36V

• Working environment temperature: -40 to 50 degrees Celsius

• Working environment humidity: 45 percent to 75 percent RH

• Voltage test range: 10-39V, measurement accuracy plus or minus 0.1 percent

• Alarm voltage: lower than 10V, 16-20V, higher than 31V flashing alarm

• Oil resistance range: 5-1000 ohms, measurement accuracy plus or minus 1 percent

• Signal: 0-190 ohm (empty 0 ohm, full 190 ohm)

• Sensor length: 100-600 mm

• Sensor operating temperature: -40 to 85 degrees Celsius

• Protection rank: IP67

• Assembly: 5 holes, 5 pieces of M5 screws and 2 mm thick gasket

• Item weight: 155 g

Package Includes

- 1 x 2-in-1 Gauge

• 1 x Fuel Level Sensor

Why You Will Love It

You get two essential readings from one compact gauge, saving space on your dashboard. The clear digital display and flashing alarms give you peace of mind that your fuel and electrical systems are working properly. It is a practical upgrade that helps you avoid breakdowns and keep your vehicle or boat running smoothly.

Questions and Answers

Question: Can this gauge work on a 24V system?

Answer: Yes, it works on DC 9-36V, so it is compatible with both 12V and 24V systems.

Question: What is the length of the fuel level sensor?

Answer: The sensor length ranges from 100 to 600 mm. You can choose the length that fits your tank.

Question: Does the gauge show voltage and fuel level at the same time?

Answer: Yes, it is a 2-in-1 display that shows both voltage and fuel level simultaneously.

Question: Is the sensor waterproof?

Answer: The sensor has an IP67 protection rating, so it is dust-tight and can handle temporary immersion in water.

Question: What happens when the fuel level is very low?

Answer: The gauge flashes an alarm when the fuel level drops below 10 percent to warn you.

Upgrade your Jeep Wrangler JK (2007-2011) with a modern 12.3-inch HD digital instrument cluster. This smart display replaces your old gauges with a clear, customizable screen that shows all your driving data, from speed and RPM to off-road metrics. It is designed for a direct fit and a fast, responsive experience.

This digital cluster brings a new level of clarity and control to your JK's dashboard. The large 1920x720 HD screen makes information easy to read at a glance, even in bright sunlight. You can choose from multiple display themes and dial styles to match your driving mood or terrain.

The system is built on a stable Linux platform for reliable performance. It starts up in about 2 seconds, so you get information without delay. The display also includes important vehicle data like battery voltage, oil pressure, coolant temperature, and oil temperature, helping you keep an eye on your engine's health.

For off-road enthusiasts, this cluster offers five driving modes: road, rock, snow, mud, and desert. Each mode adjusts the display to highlight the most useful data, such as tire angle and body angle. You can also monitor tire pressure in off-road mode. Installation is straightforward, using a plug-and-play USB connection to import your vehicle's original data.

Key Features and Benefits

- 12.3-inch HD screen with 1920x720 resolution that makes all driving data clear and easy to see.

• 2-second ultra-fast startup with a stable Linux system for quick, reliable performance.

• 5 off-road driving modes (road, rock, snow, mud, desert) that show relevant data like tire angle and body angle.

• 4 dial style options (gold, silver, white, black) to personalize the look of your dashboard.

• Displays battery voltage, oil pressure, coolant temperature, and oil temperature for better engine monitoring.

• Simple plug-and-play USB installation that imports your original car data without complicated wiring.

Who Is This For

- Jeep Wrangler JK owners from 2007 to 2011 who want a modern, clear digital display.

• Off-road drivers who need real-time data like body angle and tire pressure for different terrains.

• Drivers looking to upgrade from old, hard-to-read analog gauges to a customizable HD screen.

• Anyone who wants a fast-starting, reliable instrument cluster with a one-year warranty and support.

Usage Scenario

Mark owns a 2009 Jeep Wrangler JK that he uses for weekend trail runs. His old analog gauges were hard to read in bright sun and didn't show much off-road data. He installed this digital cluster and now sees his speed, RPM, and engine temperature clearly on the large HD screen. On a rocky trail, he switches to rock mode, and the display shows his tire angle and body angle, giving him the confidence to navigate tricky sections. The 2-second startup means he is on the move quickly, and the stable system has never lagged.

Micro Comparison

Unlike basic aftermarket gauges that only show speed and fuel, this digital cluster integrates multiple data points into one screen. It offers off-road-specific modes and customizable dial styles that simple replacements do not. The Linux-based system provides a stable and fast experience compared to some Android-based units that can lag or crash.

Specifications

- Screen Size: 12.3 inches

• Resolution: 1920 x 720

• Compatibility: Jeep Wrangler JK 2007-2011 (Sahara, Rubicon, Sport, 2-door and 4-door)

• System: Linux-based

• Startup Time: Approximately 2 seconds

• Display Modes: Road, Rock, Snow, Mud, Desert

• Dial Styles: Gold, Silver, White, Black

• Languages Supported: 12 languages

Package Includes

- 1 x Digital Instrument Cluster Display

• 1 x Plug-and-play USB wiring harness

• 1 x Dashboard cover

• 1 x User manual

Why You Will Love It

This digital cluster transforms your JK's cabin with a modern, high-definition display that is both functional and stylish. The ability to switch between off-road modes and dial colors lets you tailor the look and data to your drive. With a fast startup and reliable system, you can focus on the road or trail ahead with confidence.

Questions and Answers

Question: Will this fit my 2008 Jeep Wrangler JK 4-door?

Answer: Yes, this digital cluster is designed for Jeep Wrangler JK models from 2007 to 2011, including both 2-door and 4-door versions.

Question: How do I install this instrument cluster?

Answer: Installation is plug-and-play. You connect the USB line to your vehicle, and the system imports your original car data. No complicated wiring is needed.

Question: What information does the display show?

Answer: It shows speed, RPM, coolant temperature, oil temperature, battery voltage, oil pressure, fuel level, and more. In off-road mode, it also shows tire angle and body angle.

Question: Can I change the look of the display?

Answer: Yes, you can choose from 4 dial styles (gold, silver, white, black) and 5 driving modes that change the layout and data shown.

Question: Does this cluster support tire pressure monitoring?

Answer: Yes, it can display tire pressure values (psi) when in off-road mode, provided your vehicle has the necessary tire pressure sensors.

Monitor your engine's performance with a precise and durable 52mm tachometer. This gauge provides accurate RPM readings for your car, boat, or marine engine, featuring a bright red backlight for clear visibility in any condition. It is built to withstand harsh environments with an IP67 waterproof rating.

This tachometer is designed for universal fitment on 12V and 24V systems, making it a versatile choice for gasoline and diesel engines. The gauge offers multiple indicating ranges to suit different engine types, from 0-3000 RPM up to 0-8000 RPM. Its classic racing look adds a professional touch to your dashboard.

Installation is straightforward with the included manual. The gauge connects easily to your tacho sensor, engine, alternator, ignition coil, or crankshaft signal. The adjustable speed ratio (1-300) allows for precise calibration to match your specific vehicle or boat setup.

Built from stainless steel and nickel-plated plastic, this tachometer is made to last. The red backlight ensures your RPM data is easy to read at night or in low-light conditions. Whether you are upgrading your dashboard or replacing a faulty gauge, this tachometer delivers reliable performance.

Key Features and Benefits

- High precision measurement that provides accurate RPM readings for optimal engine monitoring.

• Red backlight that ensures clear visibility in low-light or nighttime driving conditions.

• IP67 waterproof protection that allows the gauge to withstand water exposure, even at 1 meter depth.

• Adjustable speed ratio from 1-300 that lets you calibrate the gauge for different engines and signals.

• Wide operating voltage of 9-32V DC that works with both 12V and 24V electrical systems.

• Stainless steel and nickel-plated plastic construction that offers durability and a sleek racing look.

Who Is This For

- Car and truck owners who want a reliable and accurate RPM gauge for their dashboard.

• Boat and marine enthusiasts needing a waterproof tachometer for harsh marine environments.

• Diesel generator and engine operators who require precise RPM monitoring for maintenance.

• DIY mechanics and custom builders upgrading their vehicle's instrumentation for better performance tracking.

Usage Scenario

Mark had just finished rebuilding the engine on his classic fishing boat. The old tachometer was unreliable and fogged up in the salt air. He installed this 52mm waterproof gauge, connected it to the alternator signal, and calibrated the speed ratio. Now he can see his exact RPM at a glance, even when running at full throttle in choppy water. The red backlight is easy on his eyes during early morning trips, and the gauge stays dry inside no matter how much spray hits the dash.

Micro Comparison

Many basic tachometers offer limited RPM ranges or lack waterproofing. This gauge provides multiple indicating ranges from 3000 to 8000 RPM, so you can select the right scale for your engine. Its IP67 rating means it can handle water exposure that would damage standard gauges, making it a more reliable choice for both marine and off-road applications.

Specifications

Material: Plastic + Stainless steel

Size: 52 mm / 2.0 in (diameter)

Weight: 300 g / 10.6 oz

Backlight Color: Red

Operating Voltage: 9-32V DC (12V / 24V systems)

Indicating Range: 0-3000 RPM, 0-4000 RPM, 0-6000 RPM, 0-7000 RPM, 0-8000 RPM

Protection Class: IP67

Adjustable Speed Ratio: 1-300

Number of Cylinders: 4

Placement on Vehicle: Front

Connection: Red (Battery +9-32V DC), Blue (Battery -), Black (Signal), Orange (Backlight +9-32V DC)

Input Signal: Pulse signal from tacho sensor, engine, alternator, ignition coil, crankshaft sensor

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1x Tachometer

• 1x Installation Instruction

Why You Will Love It

You will love the confidence that comes from knowing your exact engine RPM at all times. The durable, waterproof design means this gauge will keep working through rain, spray, and tough conditions. Its classic racing style and bright red backlight will make your dashboard look professional and perform better.

Questions and Answers

Question: Is this tachometer compatible with a 12V diesel engine?

Answer: Yes, it works with both 12V and 24V systems and is suitable for diesel engines.

Question: Can I use this gauge on a 4-cylinder engine?

Answer: Yes, this tachometer is designed for 4-cylinder engines.

Question: How do I calibrate the speed ratio?

Answer: The gauge has an adjustable speed ratio from 1-300. You can set it according to your engine's specifications using the included instructions.

Question: Is this gauge waterproof for marine use?

Answer: Yes, it has an IP67 protection class and can work underwater at 1 meter depth, making it suitable for boats.

Question: What signal source does this tachometer connect to?

Answer: It accepts a pulse signal from a tacho sensor, engine, alternator, ignition coil, or crankshaft sensor.

Keep your vehicle's electrical system in check with this easy-to-read Dragon Gauge volt meter. Designed for a standard 2-inch (52mm) dashboard opening, it gives you a clear, real-time reading of your battery and charging system voltage so you can spot potential problems before they leave you stranded.

This 12V DC gauge works with both standard 8-16V and 16-32V systems, making it a versatile choice for cars, trucks, vans, and SUVs. The black bezel and metal housing give it a clean, professional look that blends right into your dashboard or gauge pod. Installation is straightforward, and the package includes the gauge and some basic mounting accessories to get you started.

Whether you are monitoring a new audio system, checking alternator output, or just want to keep an eye on battery health, this volt meter provides the data you need at a glance. The bright display and simple operation mean you can focus on driving while staying informed about your vehicle's electrical status.

Key Features and Benefits

- 52mm / 2 inch diameter that fits standard gauge pods and dash openings

• Measures voltage from 8V to 16V and 16V to 32V for broad compatibility

• Metal construction and black bezel for a durable, clean look

• High sensitivity and easy operation for quick voltage checks

• 12V DC system designed for most cars, trucks, and SUVs

Who Is This For

- Car owners who want to monitor battery and alternator health

• Enthusiasts installing aftermarket audio or lighting systems

• DIY mechanics looking for a simple, reliable voltage readout

• Anyone replacing a worn or non-functioning factory volt gauge

Usage Scenario

Tom noticed his headlights dimming at stoplights and his stereo cutting out during bass drops. He installed this Dragon Gauge volt meter in his truck's empty dash slot. The next morning, he saw the voltage drop below 12V at idle. A quick alternator test confirmed the issue, and he replaced the alternator before the battery died completely. Now he keeps an eye on the gauge and drives with confidence.

Micro Comparison

Unlike generic voltmeters that only show a single range, this gauge covers both 8-16V and 16-32V, giving you more flexibility for different vehicle types. The metal housing and black bezel add a touch of quality that plastic gauges lack. It is a no-fuss, direct-fit solution for anyone who wants accurate voltage data without complicated wiring or programming.

Specifications

- Material: Metal

• Color: Black

• Diameter: 52 mm / 2 in

• Voltage: 12V DC

• Item Height: 40.5 mm

• Item Length: 69 mm

• Item Width: 73 mm

• Item Weight: 98 g

Package Includes

- 1 x Volt Gauge

• Some Installation Accessories (instructions not included)

Why You Will Love It

You will love the peace of mind that comes from knowing your electrical system is working properly. This gauge helps you catch problems early, so you avoid unexpected breakdowns. It is a simple upgrade that makes a real difference in how you understand your vehicle.

Questions and Answers

Question: Will this gauge work with a 24V system?

Answer: Yes, it covers 16-32V, so it works with 24V systems found in some trucks and commercial vehicles.

Question: Does the gauge come with a wiring harness?

Answer: The package includes some installation accessories, but no dedicated wiring harness or instructions.

Question: Is the display backlit?

Answer: The product information does not specify a backlight feature. It is a simple analog-style volt meter.

Question: Can I install this gauge in a boat or RV?

Answer: Yes, as long as the electrical system is 12V DC and you have a 52mm / 2 inch mounting hole, it will work.

Question: What is the accuracy of the voltage reading?

Answer: The gauge is designed for high sensitivity and easy operation, but exact accuracy specifications are not provided.

Stay informed about your speed, direction, and mileage without taking your eyes off the road. This GPS-powered head-up display projects essential driving data directly onto your windshield, helping you drive more safely and confidently on every trip.

This HUD system uses satellite positioning to deliver real-time speed, compass heading, and navigation prompts in a clear, bright format. The high-definition display adjusts automatically for daytime and nighttime visibility, so you always get a crisp reading regardless of the light outside. An integrated overspeed alarm alerts you when you exceed your set limit, adding an extra layer of awareness.

Installation is straightforward with no complex wiring required. The compact unit sits neatly on your dashboard and works with virtually any vehicle model. Whether you are driving a car, truck, or SUV, this device provides a consistent and reliable way to monitor your speed and position without glancing down at the dashboard.

Built for drivers who value safety and convenience, this head-up projector turns your windshield into an intelligent information panel. From daily commutes to long highway journeys, it keeps critical data right in your line of sight so you can focus on the road ahead.

Key Features and Benefits

- GPS-based speed measurement that provides accurate, real-time speed data without needing a physical speedometer connection

• Head-up display technology that projects information onto the windshield so you never have to look down while driving

• High-brightness display that remains clear and readable in both bright daylight and dark nighttime conditions

• Built-in compass and overspeed alarm that help you stay oriented and alert to speed limits

• Wide vehicle compatibility that works with all car brands and models, including trucks and SUVs

• Simple dashboard installation with easy-to-understand controls, even for first-time HUD users

Who Is This For

- Drivers who want to reduce distractions and keep their eyes on the road at all times

• Fleet and long-haul truck drivers who need continuous speed and navigation data at a glance

• Car enthusiasts looking to add modern tech to older vehicles without a built-in head-up display

• New or inexperienced drivers who benefit from clear, real-time feedback on speed and direction

Usage Scenario

Mark drives an older sedan that lacks modern navigation or driver information systems. On his daily highway commute, he found himself constantly glancing down at the dashboard to check his speed, especially in zones with changing limits. After installing this GPS HUD, the speed and compass heading now appear clearly on his windshield. He no longer needs to look away from the road to know if he is within the limit, and the overspeed alarm gives him an extra reminder when he drifts too fast. The difference in his focus and confidence behind the wheel has been immediate.

Micro Comparison

Unlike smartphone GPS apps that require a mount and split your attention between the road and a small screen, this HUD projects data directly into your natural field of view. It does not rely on a phone battery or cellular signal, and the dedicated high-brightness display outperforms most phone screens in direct sunlight. For drivers who want a permanent, distraction-free solution, this dedicated unit provides a cleaner and more reliable experience than a phone-based alternative.

Specifications

- Brand: HELTC

• Functions: Navigation, speed measurement, mileage statistics, compass, overspeed alarm

• Display type: High-brightness, high-definition HUD projection

• Compatibility: Suitable for all vehicle models

• GPS coverage: Worldwide

Package Includes

- 1 x Speedometer HUD

Why You Will Love It

You will appreciate how much easier and safer driving becomes when your speed and direction are always visible without effort. The simple setup and universal fit mean you can enjoy this upgrade in any vehicle. It turns every trip into a more informed, relaxed experience behind the wheel.

Questions and Answers

Question: Does this HUD work with all car models?

Answer: Yes, this GPS HUD is designed to be compatible with all vehicle models, including cars, trucks, and SUVs, regardless of brand or year.

Question: Do I need to connect it to my car's OBD port?

Answer: No, this unit uses GPS satellite signals for speed and position data, so it does not require an OBD connection. It works independently.

Question: Is the display bright enough to read in direct sunlight?

Answer: Yes, the display uses high-brightness technology that remains clear and readable even in bright daylight conditions.

Question: Can I set my own speed limit for the overspeed alarm?

Answer: Yes, the overspeed alarm allows you to set a custom speed threshold. When you exceed that limit, the device will alert you.

Question: Does it show navigation directions?

Answer: The device includes navigation support and provides directional information, but it is primarily designed for speed, compass, and mileage data rather than turn-by-turn map guidance.

Upgrade your BMW's cockpit with a 10 inch HD LCD digital cluster that replaces the factory instrument panel. This virtual dashboard offers clear driving data, multiple UI styles, and easy plug-and-play installation for select 1 Series, 2 Series, X1, and X2 models from 2014 to 2021.

Your original dashboard can feel outdated compared to modern digital cockpits. This 1920x720 resolution LCD screen brings your BMW's interior into the present with crisp graphics and real-time vehicle information. The Linux operating system boots in about 2 seconds, so you get immediate access to speed, fuel consumption, tire pressure, and door status without lag.

The digital cluster keeps all original car functions intact. You still see total mileage, oil temperature, warning lights, and other essential data. The anti-glare screen reduces reflections and eye strain during daytime driving. Multiple language settings let you switch the interface to your preferred language.

Installation is straightforward with minimal wiring. There is no need to modify existing cables or make complicated connections. The cluster fits directly into your dashboard and communicates with your vehicle's existing systems. A 30-day return policy covers quality issues, and aftermarket service is available for one year.

Key Features and Benefits

- 10 inch HD LCD display that provides a 1920x720 resolution for clear, sharp driving information

• Linux operating system that boots in 2 seconds for fast startup and smooth navigation

• 7 selectable UI styles with 3 color schemes each that let you personalize the look to match your driving mood

• Anti-glare blue light screen that reduces eye fatigue during long drives and night trips

• Full compatibility with original vehicle functions including mileage, fuel consumption, tire pressure, and door reminders

• Simple plug-and-play installation that requires no cable modifications or complex wiring

Who Is This For

- BMW owners with 1 Series (F20, F52 2013-2019), 2 Series (F22, F45 2013-2019), X1 (F48, F49 2016-2021), or X2 (F39 2018-2021) models looking for a modern digital upgrade

• Drivers who want real-time data like tire pressure, fuel consumption, and door status displayed in a clear, customizable format

• Car enthusiasts who enjoy switching between multiple UI themes and color schemes for a fresh cockpit experience

• DIY installers who prefer a simple, no-modification setup that does not require professional mechanic skills

Usage Scenario

Mark drives a 2017 BMW 1 Series for his daily commute. The factory analog cluster felt basic compared to newer cars. After installing this digital dashboard, he now sees his speed, fuel level, and tire pressure on a crisp 10 inch screen. He switches to the sporty UI style on weekends and uses the minimalist layout for workdays. The anti-glare screen helps him see clearly during sunset drives. Installation took him about 30 minutes with basic tools.

Micro Comparison

Many aftermarket clusters require complex wiring or lose original car functions. This digital dashboard keeps all factory features like mileage, oil temperature, and warning lights while adding a modern LCD screen. The 7 UI styles and 3 color options give you more personalization than most retrofit kits. The Linux system boots faster than Android-based alternatives, so you get instant data without waiting.

Specifications

- Screen Size: 10 inch HD LCD display

• Resolution: 1920x720

• Operating System: Linux

• Placement: Dashboard

• Special Features: 10 inch HD LCD display screen

Package Includes

- 1 x Digital Instrument Cluster

• 1 x Wiring Harness

• 1 x User Manual

Why You Will Love It

You get a modern digital cockpit without losing any original BMW functions. The 7 UI styles and color options let you change the look whenever you want. The simple installation means you can upgrade your dashboard in under an hour with no special tools.

Questions and Answers

Question: Will this work with my 2015 BMW 2 Series F22?

Answer: Yes, this cluster is compatible with the BMW 2 Series F22 models from 2013 to 2019.

Question: Does the digital cluster show my original mileage?

Answer: Yes, it displays total mileage along with other original functions like fuel consumption and speed.

Question: How many UI styles can I choose from?

Answer: You get 7 UI styles total. The base version has 4 styles, and a firmware upgrade adds 3 more. Each style has red, blue, and yellow color options.

Question: Is professional installation required?

Answer: No, installation is simple with minimal cables. You do not need to modify any existing wiring.

Question: What is the return policy for this product?

Answer: Products with quality problems within 30 days can be returned for a refund or replacement. Aftermarket service is provided for one year.

Monitor your vehicle's electrical system with this compact 2" 52mm digital voltmeter gauge. Designed for cars, boats, and motorcycles, it displays voltage from 8 to 16 volts with a clear red backlight. The easy-to-read digital screen helps you keep an eye on battery health and alternator performance while driving.

This voltmeter gauge fits into a standard 52mm dashboard opening and works with 12V or 24V systems. The red LED display is visible day or night, making it simple to check your voltage at a glance. Whether you are troubleshooting a charging issue or just want to monitor your battery, this gauge gives you the information you need without clutter or complexity.

Built with a durable plastic housing and a sleek black and silver finish, this gauge matches most vehicle interiors. It connects easily to your power source and provides real-time voltage readings. The compact size means it fits neatly into your dashboard, console, or gauge pod without taking up too much space.

Stay informed about your vehicle's electrical status with this reliable digital voltmeter. It is a practical upgrade for anyone who wants to keep their battery and charging system in good condition. Simple installation and accurate readings make it a useful tool for everyday driving or marine use.

Key Features and Benefits

- Digital display that shows voltage from 8 to 16 volts for accurate battery monitoring

• Red backlight that stays visible in low light or darkness for easy reading at any time

• 52mm diameter that fits standard gauge openings for straightforward installation

• Works with 9 to 32V systems (12V and 24V) for versatility across different vehicles

• Plastic housing with multiple color options to match your dashboard style

Who Is This For

- Car owners who want to keep an eye on battery voltage and alternator output

• Boat operators who need a reliable voltage reading for marine electrical systems

• Motorcycle riders looking for a compact gauge to monitor charging performance

• DIY enthusiasts adding a voltage meter to a custom dashboard or gauge panel

Usage Scenario

Mark noticed his car battery was dying more often than usual. Instead of guessing, he installed this 52mm digital voltmeter in his dashboard. Now he can see the exact voltage when the engine is off and while driving. The red backlight makes it easy to check at night, and the compact size fits perfectly next to his other gauges. He caught a weak alternator early and saved himself from getting stranded.

Micro Comparison

Unlike analog voltmeters that can be hard to read precisely, this digital gauge gives you an exact number. The red backlight is brighter and clearer than many stock dashboard displays. It also works with both 12V and 24V systems, making it more flexible than single-voltage meters.

Specifications

- Material: Plastic

• Diameter: 52mm / 2.0 in

• Measurement Range: 8 to 16V

• Working Voltage: 9 to 32V (12V / 24V compatible)

• Backlight Color: Red

• Color Options: Black and Silver, Black, White and Silver

• Placement: Front dashboard or panel mount

Package Includes

- 1 x Digital Voltmeter Gauge

• 1 x User Manual (no cable included)

Why You Will Love It

You get real-time voltage data without complicated wiring or bulky equipment. The bright red display is easy to read in any light, and the compact size fits neatly into your dashboard. It gives you peace of mind knowing your battery and charging system are performing as they should.

Questions and Answers

Question: What voltage range does this gauge measure?

Answer: It measures from 8 to 16 volts, which covers most car, boat, and motorcycle battery systems.

Question: Does this gauge work with a 24V system?

Answer: Yes, it works with both 12V and 24V systems. The working voltage range is 9 to 32V.

Question: What is the size of the gauge?

Answer: The gauge has a 52mm diameter, which is about 2 inches. This is a standard size for most gauge pods and dashboards.

Question: Is the backlight always on?

Answer: The red backlight is on when the gauge is powered. It stays lit so you can read the display in any lighting condition.

Question: Does the package include wiring or a cable?

Answer: No, the package includes the gauge and a user manual. You will need to supply your own wire for connection.

Monitor your engine's vital signs with a single, customizable gauge. This 60mm gauge offers multiple functions including turbo boost, water temperature, oil temperature, oil pressure, RPM, volt, and vacuum readings. The standout feature is its 64-color backlight, letting you match your dashboard perfectly.

This gauge is built for drivers who want precise data and a personalized look. It uses a moving-magnet needle system for durability and anti-vibration, making it reliable for long-term use in vehicles, boats, and machinery. The stepper motor pointer provides accurate readings, and the gauge works within a 10-16V operating range.

Choose from several function types to match your monitoring needs. Options include turbo boost in Bar or KPa, water temperature, oil temperature, oil pressure, voltmeter, air fuel ratio, exhaust gas temperature, vacuum, and tachometer. Each gauge features a black background with a backlight that cycles through 64 colors.

The gauge is designed for easy installation with a standard 60mm fixing dimension. It comes with an instruction manual to guide you through setup. Whether you are upgrading a car, truck, boat, or off-road vehicle, this gauge provides clear, real-time data in a compact size.

Key Features and Benefits

- Moving-magnet needle drive that provides good endurance and anti-vibration for reliable long-term use

• 64-color backlight that lets you customize the gauge look to match your vehicle interior

• Stepper motor pointer with polarity and over-voltage protection for consistent performance

• IP67 protection rank that makes the gauge waterproof, anti-fog, and resistant to harsh environments

• Wide operating voltage range of 10-16V that works with standard 12V vehicle electrical systems

Who Is This For

- Car enthusiasts who want to monitor engine performance with a customizable dashboard gauge

• Boat owners who need durable, waterproof gauges for marine engine monitoring

• Off-road vehicle drivers who require reliable gauges that can handle vibration and rough conditions

• Mechanics and tuners who need accurate readings for turbo boost, temperature, and pressure

Usage Scenario

Mark installed this gauge in his modified sedan to keep an eye on turbo boost pressure and oil temperature during track days. The 64-color backlight matches his other dashboard lights, and the needle responds quickly to changes in boost. He can see at a glance if his engine is running within safe parameters, giving him confidence to push harder on the straightaways.

Micro Comparison

Unlike basic single-function gauges that only show one reading, this customizable gauge lets you pick the function you need most. The 64-color backlight gives you personalization that standard gauges lack. The moving-magnet design and IP67 protection make it more durable than many entry-level gauges for demanding environments.

Specifications

Material: Plastic Shell

Size: 60mm / 2.4 in diameter

Background Color: Black

Backlight: 64 colors replaceable

Operating Temperature: -30°C to +60°C / -22°F to 140°F

Storage Temperature: -30°C to +80°C / -22°F to 176°F

Protection Rank: IP67

Indicating Range: 8-18V

Operating Voltage: 10V-16V DC (12V vehicles only)

Fixing Dimension: 60mm / 2.4 in

Operating Temperature: -30°C to +60°C / -22°F to 140°F

Storage Temperature: -30°C to +80°C / -22°F to 176°F

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x Gauge

• 1 x Instruction manual

Why You Will Love It

You get a professional-grade gauge that monitors exactly what matters for your engine. The 64-color backlight makes your dashboard stand out, and the durable build gives you peace of mind in any driving condition. It is a simple upgrade that brings precision and personalization to your vehicle.

Questions and Answers

Question: What functions does this gauge support?

Answer: This gauge is available in several function types including turbo boost (Bar or KPa), water temperature, oil temperature, oil pressure, voltmeter, air fuel ratio, exhaust gas temperature, vacuum, and tachometer. You select the function you need.

Question: Can I change the backlight color?

Answer: Yes, the backlight has 64 colors that you can replace at will to match your dashboard or personal style.

Question: Is this gauge waterproof?

Answer: Yes, it has an IP67 protection rank, which means it is waterproof, anti-fog, and resistant to dust and moisture.

Question: What is the size of this gauge?

Answer: The gauge has a diameter of 60mm / 2.4 in, which is a standard size for most gauge pods and dashboards.

Question: What voltage does this gauge work with?

Answer: It operates on 10-16V DC and is designed for 12V vehicle electrical systems only.

Replace your vehicle's faulty central navigator LCD screen with this dedicated display unit. Designed for select Peugeot and Citroen models, it resolves common pixel loss and display fading issues in the multifunction unit. This direct-fit replacement restores clear readability to your dashboard information.

This LCD screen is a practical repair solution for the central navigator display in your car. Over time, the original screen can develop missing pixels or dim sections that make it hard to read. This replacement screen brings back full display functionality, allowing you to see your trip data, audio settings, and other vehicle information clearly again.

The screen is made with a glass panel and a plastic frame, matching the original part's construction. It is designed to fit the dashboard cluster of compatible models. Before purchasing, it is important to check your dashboard style to ensure a proper match with your vehicle's specific configuration.

Installation involves replacing the old screen unit with this new one. The repair can save you from needing a more expensive full dashboard module replacement. Once installed, the display provides a crisp and functional interface for your car's central systems.

Key Features and Benefits

- Replacement LCD screen that resolves pixel loss and display fading in the central navigator unit.

• Made with glass and plastic materials for a durable and accurate fit with the original dashboard cluster.

• Direct-fit design for the multifunction unit of compatible Peugeot and Citroen models.

• Restores clear readability of trip data, audio, and vehicle settings on the dashboard display.

• Cost-effective repair alternative to replacing the entire dashboard module or multifunction unit.

Who Is This For

- Peugeot 206 or 307 owners experiencing pixel deterioration or fading on their central display.

• Citroen C5 or Xsara Picasso drivers whose multifunction unit screen has become hard to read.

• Car enthusiasts looking for a direct replacement part to restore factory dashboard functionality.

• DIY mechanics who prefer a simple screen swap over a costly full unit replacement.

Usage Scenario

Marc noticed his Peugeot 206's central display was losing pixels along the top edge. The trip computer and radio information became difficult to read, especially in bright sunlight. Instead of visiting a dealership for an expensive module replacement, he ordered this dedicated LCD screen. After checking his dashboard style to confirm compatibility, he swapped the old screen for the new one in about 20 minutes. The display is now fully clear, and all the information is easy to read again.

Micro Comparison

While some repair options involve sending your entire dashboard unit for service, this replacement screen allows you to fix the problem yourself at home. It targets the specific failing component — the LCD panel — rather than requiring a full module swap. This makes it a faster and more affordable solution for the same end result: a fully functional central navigator display.

Specifications

Material: plastic + glass

Color: As Shown

Placement on Vehicle: Dashboard Cluster

Interchange Part Number: Standard

Manufacturer Part Number: KR00003

Other Part Number: Standard

Special Features: Displaying

Package Includes

- 1 x Car Central Navigator LCD Screen Display

Why You Will Love It

You will love how this simple screen replacement brings your car's dashboard back to life. It saves you from an expensive dealership repair while restoring full visibility to your vehicle's central information display. The direct fit makes installation straightforward, giving you professional results at home.

Questions and Answers

Question: Will this screen fix pixel loss on my Peugeot 206 display?

Answer: Yes, this replacement LCD screen is designed to resolve pixel loss and fading issues common in the Peugeot 206 central navigator display.

Question: How do I know if this screen fits my Citroen C5?

Answer: You should check your dashboard style before purchasing to confirm compatibility with your specific Citroen C5 model and dashboard configuration.

Question: What is the screen made of?

Answer: The screen is made of a glass display panel with a plastic frame, matching the construction of the original part.

Question: Does the package include installation tools?

Answer: No, the package includes only the LCD screen display. Tools and other items are not included.

Question: Can this screen be used for a Peugeot 307?

Answer: Yes, this screen is listed as compatible with Peugeot 307 models, but you should verify your dashboard style first.

Question: Will the color of the screen match my original display?

Answer: The screen color is listed as "As Shown" in the product images. Minor differences may occur due to light reflection and different display settings.

Keep an eye on your engine's health with this 2-in-1 car LCD gauge that combines a water temperature meter and a voltmeter in one compact unit. It gives you a clear digital readout of both coolant temperature and battery voltage so you can spot potential issues before they turn into costly repairs.

This gauge is built for drivers who want reliable real-time data without cluttering the dashboard. The bright digital display makes it easy to read at a glance, even in direct sunlight. It works with both 12V and 24V electrical systems, making it a versatile choice for cars, trucks, SUVs, and motorcycles.

Installation is straightforward thanks to the included water temperature sensor and pre-wired cables. The sensor screws directly into your engine's cooling system using the M10 thread, and the gauge connects to your power supply with simple red and black wires. Once installed, the display shows temperature and voltage readings with high precision and low power consumption.

If the temperature or voltage goes outside the normal range, the display starts flashing as an alarm. This early warning system helps you react quickly to overheating or electrical problems, giving you more control over your vehicle's condition on the road.

Key Features and Benefits

- Dual display shows water temperature and battery voltage at the same time for complete engine monitoring

• Digital LCD readout provides clear, intuitive readings that are easy to see in any lighting

• Flashing alarm alerts you when temperature or voltage goes out of range so you can take action early

• Works with both 12V and 24V systems for broad compatibility across different vehicles

• Low power consumption design keeps the gauge running without draining your battery

• Anti-vibration and anti-bump construction ensures stable performance even on rough roads

Who Is This For

- Car owners who want a simple way to monitor engine temperature and battery health

• Truck and SUV drivers with 24V electrical systems who need a gauge that matches their setup

• Motorcycle enthusiasts looking for a compact dual-function gauge to add to their dash

• DIY mechanics who prefer easy-to-install accessories with clear wiring instructions

Usage Scenario

Mike drives a 2005 pickup truck that he uses for weekend camping trips. After his old temperature gauge stopped working, he installed this 2-in-1 meter in about 20 minutes. During a long uphill climb on a hot summer day, he noticed the temperature reading rising and the alarm flashing. He pulled over, let the engine cool down, and found a small coolant leak he would have missed otherwise. The early warning saved him from an overheated engine and a tow truck bill.

Micro Comparison

Unlike single-function gauges that only show temperature or voltage, this 2-in-1 unit gives you both readings from one display. It saves dashboard space and reduces wiring complexity. The built-in flashing alarm adds an extra layer of safety that basic gauges often lack, making it a practical upgrade for anyone who wants more visibility into their vehicle's condition.

Specifications

Material: Plastic Shell

Temperature sensor screw diameter: 10 mm / 0.39 in

Temperature sensor thread: M10

Power supply: DC 9V - 36V

Cable length: approx. 300 cm / 118.1 in

Display digits: 3

Item dimensions: 100 x 14 x 55 mm / 3.9 x 0.6 x 2.2 in

Item weight: 156 g / 5.5 oz

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1x Water temperature gauge

• 1x Water temperature sensor

Why You Will Love It

Having both temperature and voltage data in one gauge means less clutter and more information at a glance. The alarm feature gives you peace of mind that you will know about problems early. It is a practical, affordable upgrade that helps you keep your vehicle running reliably mile after mile.

Questions and Answers

Question: What vehicles is this gauge compatible with?

Answer: It works with any 12V or 24V vehicle, including cars, trucks, SUVs, vans, and motorcycles.

Question: How do I install the temperature sensor?

Answer: Screw the M10 sensor into a suitable port in your engine's cooling system, then connect the wires to the gauge.

Question: Does the display show both readings at the same time?

Answer: Yes, the LCD screen shows both water temperature and voltage simultaneously.

Question: What does the flashing alarm mean?

Answer: The display flashes when temperature or voltage goes outside the normal operating range to alert you of a potential issue.

Question: How long is the cable between the gauge and the sensor?

Answer: The cable is approximately 300 cm or 118 inches long, giving you flexibility in placement.