Keep a close watch on your engine's vital signs with this 3-in-1 digital car gauge. It measures water temperature, oil pressure, and voltage all in one compact 52mm unit, so you can monitor three critical systems at a glance. The bright red LED backlight makes the display easy to read, even in low-light driving conditions.

This gauge is built to handle tough environments. It features a 316 stainless steel casing and an IP67 waterproof and dustproof rating, which means it can stand up to moisture, humidity, and vibration inside the engine bay. The 100 percent imported MCU ensures stable and reliable performance over time.

Setting up the gauge is straightforward thanks to its wide compatibility with many sensor signal types. It works with 0 to 190 ohm and 240 to 33 ohm resistance sensors, 0 to 5 V and 0.5 to 4.5 V voltage sensors, and 4 to 20 mA current sensors. The gauge also has a built-in alarm system that triggers when water temperature exceeds 95 degrees Celsius or oil pressure drops below 0.8 Bar. A sensor disconnect alarm displays "OFF" if a connection is lost.

Whether you are building a custom dash, upgrading an older vehicle, or adding extra monitoring to a daily driver, this gauge delivers accurate readings and a clean, professional look. The high-brightness LED backlight lasts a long time and keeps the numbers sharp in direct sun or at night.

Key Features and Benefits

- Three functions in one display that saves dashboard space and reduces wiring complexity

• 316 stainless steel housing that resists corrosion from moisture, acid, and heat

• IP67 waterproof and dustproof rating that protects the electronics in wet or dusty engine bays

• Built-in alarm system for water temperature and oil pressure that alerts you before damage occurs

• Sensor disconnect alarm that immediately shows "OFF" when a sensor loses connection

• High-brightness red LED backlight that stays readable in bright sunlight and at night

• Wide operating voltage range from 9 to 32 volts DC that works with most 12V and 24V vehicle electrical systems

• Low power consumption under 60 mA that does not drain your battery

Who Is This For

- Car enthusiasts who want a clean, multi-function gauge for their custom dashboard or pillar mount

• DIY mechanics upgrading an older car that lacks factory coolant temperature or oil pressure readouts

• Truck and off-road vehicle owners who need rugged, waterproof gauges for harsh driving conditions

• Racers and track day drivers who rely on precise engine monitoring and early warning alarms

Usage Scenario

Mark drives a 1990s pickup he restored in his garage. The original instrument cluster had no oil pressure gauge and only a vague temperature warning light. He installed this 3-in-1 gauge in a single 52mm pod on the A-pillar. Now during his daily commute he can see exact oil pressure and coolant temperature. On a hot summer day the water temperature alarm went off before the engine overheated, giving him time to pull over and check the coolant level. That early warning saved him from a costly head gasket repair.

Micro Comparison

Unlike single-function gauges that require separate pods and wiring for each reading, this unit combines three critical measurements into one housing. The built-in alarm system also sets it apart from basic gauges that only display numbers without warning you of dangerous conditions. The IP67 waterproof rating gives it an edge over standard car gauges that can fog up or fail when exposed to moisture.

Specifications

Material: Stainless steel 316 and plastic

Size: 52 mm diameter

Color: Black housing with red LED backlight

Operating Voltage: 9 to 32 V DC

Power Consumption: Less than 60 mA

Operating Temperature: -30 to 75 degrees Celsius

Storage Temperature: -40 to 85 degrees Celsius

Degree of Protection: IP67

Water Temperature Alarm: Above 95 degrees Celsius

Oil Pressure Alarm: Below 0.8 Bar

Sensor Compatibility: 0 to 190 ohm, 240 to 33 ohm, 0 to 5 V, 0.5 to 4.5 V, 4 to 20 mA

Package Includes

- 1 x Gauge

• 1 x Wiring Harness

• 1 x Instruction Manual

Why You Will Love It

You get a complete engine monitoring solution in a single gauge that fits almost any dashboard. The bright red display and built-in alarms give you confidence that you will catch a problem before it becomes a breakdown. Plus the waterproof build means this gauge will keep working season after season.

Questions and Answers

Question: Will this gauge work with my 12V car?

Answer: Yes, it operates on 9 to 32 volts DC, so it works with standard 12V cars and 24V trucks.

Question: Does the gauge come with sensors?

Answer: The package includes the gauge, wiring harness, and instruction manual. Sensors are sold separately.

Question: Can I mount this gauge in a standard 52mm pod?

Answer: Yes, it has a 52mm diameter and fits most standard gauge pods and mounting kits.

Question: What does the alarm sound like?

Answer: The gauge has a built-in visual alarm that turns on a warning light when water temperature exceeds 95 degrees Celsius or oil pressure drops below 0.8 Bar.

Question: Is the display readable in direct sunlight?

Answer: Yes, the high-brightness red LED backlight stays clear and sharp even in bright daylight.

Question: Can I connect this gauge to aftermarket sensors?

Answer: Yes, it works with many analog sensor signals including 0 to 190 ohm, 240 to 33 ohm, 0 to 5 V, 0.5 to 4.5 V, and 4 to 20 mA.

Keep an eye on your engine's vital signs with this 3 in 1 car LCD digital gauge. It combines a voltmeter, oil pressure gauge, and water temperature gauge into one compact unit. Designed for 12-24V vehicles, it gives you clear, real-time data to help you drive with more confidence.

This multi-functional gauge replaces the need for three separate instruments. Its digital display makes readings easy to see at a glance. Whether you drive a car, truck, or motorcycle, this universal meter helps you monitor key engine parameters without cluttering your dashboard.

Installation is straightforward, and the gauge is built to handle tough conditions. It features stable performance, low power consumption, and resistance to vibration and bumps. With a measurement speed of 3-5 seconds, you get quick updates on your engine's status.

Key Features and Benefits

- 3-in-1 digital display that shows voltage, oil pressure, and water temperature in one unit for a cleaner dashboard setup.

• Wide 9V-36V power supply range that works with most 12V and 24V vehicle electrical systems.

• Anti-vibration and anti-bump construction that keeps the gauge reliable on rough roads or off-road terrain.

• Quick 3-5 second measurement speed that gives you fast updates when you start your engine or notice a change.

• Low power consumption design that puts minimal strain on your vehicle's battery over long periods of use.

Who Is This For

- Car owners who want a simple way to track engine health without installing multiple separate gauges.

• Truck drivers who need reliable readings for voltage, oil pressure, and coolant temperature during long hauls.

• Motorcycle riders looking for a compact, weather-resistant gauge to monitor engine vitals on the go.

• DIY mechanics and hobbyists who prefer a universal gauge that fits different vehicles and projects.

Usage Scenario

Mark drives an older pickup truck he uses for weekend camping trips. He noticed the dashboard warning lights were vague and wanted more specific data. After installing this 3-in-1 gauge, he can now see his battery voltage at startup, monitor oil pressure on steep climbs, and check water temperature during long summer drives. The digital display is easy to read even in bright sunlight, and the compact size fits neatly next to his steering column.

Micro Comparison

Unlike analog gauges that can be hard to read at a glance, this digital display shows precise numbers clearly. It combines three functions into one unit, saving dashboard space compared to buying three separate meters. The 12-24V compatibility makes it more versatile than gauges limited to a single voltage system.

Specifications

- Material: Plastic Shell

• Product Size: 55mm x 99mm x 14mm / 2.2 x 3.9 x 0.6 in

• Power Cable Length: approx. 50 cm / 19.7 in

• Power Supply: DC 9V - 36V

• Pressure Measuring Range: 0.00 - 1.00 Mpa

• Accuracy: +/-1%

• Measurement Speed: 3-5 seconds

• Water Temperature Range: -10°C to 110°C / 14°F to 230°F

• Ambient Temperature: -10°C to 50°C / 14°F to 122°F

• Temperature Sensor Thread: M10

• Oil Pressure Sensor Thread: 1/8 NPT

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x Gauge

• 1 x Set Cable

• 1 x Temperature Sensor

• 1 x Oil Pressure Sensor

Why You Will Love It

You get three essential readings in one compact gauge, which simplifies your dashboard and saves installation time. The digital display removes guesswork, giving you confidence that your engine is running within safe ranges. It is a practical upgrade for anyone who values knowing exactly what is happening under the hood.

Questions and Answers

Question: Will this gauge work on a 12V car?

Answer: Yes, it works on both 12V and 24V systems, including most cars, trucks, and motorcycles.

Question: How do I install the oil pressure sensor?

Answer: The sensor uses a standard 1/8 NPT thread. You can install it into an available port on your engine block or use an adapter if needed.

Question: Does the gauge come with a wiring harness?

Answer: Yes, the package includes a set of cables with clearly marked red and black wires for power connections.

Question: Can I use this gauge on a motorcycle?

Answer: Yes, it is suitable for motorcycles as long as your electrical system is within the 9V-36V range.

Question: What does the alarm do on this gauge?

Answer: The display flashes an alarm when voltage drops below 10V, rises above 31V, or falls between 16-20V, alerting you to potential issues.

Keep an eye on your car battery and charge your devices at the same time. This 3-in-1 car accessory combines a digital voltmeter, thermometer, and dual USB charger in one compact unit that plugs directly into your 12V or 24V cigarette lighter socket.

This multifunctional car LCD display lets you monitor your vehicle's voltage and interior temperature in real time. Simply insert the charger socket and the digital display immediately confirms your battery voltage. The built-in thermometer measures temperatures from 9 to 80 degrees Celsius, giving you useful information about your car's cabin conditions.

The dual USB ports deliver a 5V/2.1A output, providing enough power to charge your phone, tablet, or GPS device simultaneously. The stylish and lightweight design features a high brightness LED display that is easy to read even in direct sunlight. Installation is simple and requires no professional skills, making it a practical upgrade for any car owner.

Built with a durable ABS and electronic component construction, this universal device works with most vehicle models. Choose from red plus red, red plus blue, or red plus green display color options to match your interior preference.

Key Features and Benefits

- 3-in-1 functionality combines a voltmeter, thermometer, and USB charger that saves dashboard space and reduces clutter

• Real-time voltage monitoring lets you check your car battery health at a glance

• Built-in thermometer with a 9 to 80 degree Celsius range helps you keep track of cabin temperature

• Dual USB ports with 5V/2.1A output charge your phone, tablet, and GPS quickly

• Easy plug-and-play installation requires no tools or professional skills

• High brightness LED digital display remains readable in bright daylight

Who Is This For

- Drivers who want to monitor their car battery voltage without a complicated installation

• Travelers who need extra USB charging ports for phones, tablets, and GPS devices

• Car owners who want a simple way to check interior temperature while parked

• Anyone looking for a clean, all-in-one accessory to replace separate voltmeters and chargers

Usage Scenario

Sarah was driving cross-country and noticed her car was slow to start in the morning. She plugged in this 3-in-1 monitor and immediately saw the voltage was lower than normal. The thermometer also showed the interior was getting hot while parked in the sun. She used the USB ports to keep her phone charged for navigation. The compact design meant she didn't lose access to her other dashboard controls.

Micro Comparison

Unlike single-purpose car chargers that only provide power, this 3-in-1 device adds battery monitoring and temperature tracking without taking up extra space. Many basic USB adapters lack voltage feedback, leaving you unaware of a weakening battery until it fails. This unit gives you three useful functions in one compact plug.

Specifications

Material: ABS + Electronic Components

Voltage: 12/24V

USB output: 5V/2.1A

Display: digital display

Measuring range: 9 to 80 degrees Celsius

Installation position: car interior

Vehicle compatibility: universal

Product color: black

Display color options: red + red, red + blue, red + green

Product size: 75 x 47 x 47 mm / 2.95 x 1.85 x 1.85 inches

Net weight: 33 g

Package Includes

1 x 3 in 1 Car LED Digital Voltmeter Gauge Thermometer USB Charger

Why You Will Love It

You will appreciate the peace of mind that comes from knowing your battery voltage at a glance. The added USB charging capability means you can keep your devices powered during long drives. Its simple plug-and-play design makes it a practical and worry-free addition to any vehicle.

Questions and Answers

Question: Does this voltmeter work with both 12V and 24V vehicles?

Answer: Yes, this device is designed to work with both 12V and 24V car electrical systems.

Question: How do I install this in my car?

Answer: Simply plug it into your vehicle's cigarette lighter or accessory socket. No tools or professional installation are needed.

Question: Can I charge two devices at the same time?

Answer: Yes, the dual USB ports provide a combined 5V/2.1A output, allowing you to charge two devices simultaneously.

Question: What temperature range does the thermometer measure?

Answer: The thermometer measures temperatures from 9 to 80 degrees Celsius.

Question: Is the display bright enough to read in direct sunlight?

Answer: Yes, the LED display has high brightness and remains readable even in bright daylight conditions.

Question: What colors are available for the display?

Answer: You can choose from red plus red, red plus blue, or red plus green display color options.

Keep your vehicle's battery health, interior temperature, and device charging all in one place. This 3 in 1 car accessory combines a digital voltmeter, a thermometer, and a USB charger into a single compact unit that plugs directly into your car's 12V or 24V socket.

You no longer need multiple gadgets to monitor your car's vital signs. This device gives you a clear LED digital display of your battery voltage and cabin temperature at a glance. It also features a fast-charging USB port with 5V/2.1A output, so your phone, tablet, or GPS stays powered during every drive.

The installation is simple. Just insert the unit into your car's cigarette lighter or power socket. It works immediately, showing you the current battery voltage on its bright digital screen. The low power consumption design ensures it won't drain your battery when not in use.

Built from durable ABS and electronic components, this voltmeter thermometer charger is designed for universal use across most car brands and models. Its lightweight black housing fits neatly into your dashboard without blocking other controls. You can choose from three display color combinations: red and red, red and blue, or red and green.

Key Features and Benefits

- 3-in-1 functionality that combines a voltmeter, thermometer, and USB charger to reduce dashboard clutter

• Real-time LED digital display that shows battery voltage and cabin temperature for instant status checks

• USB output of 5V/2.1A that charges phones, tablets, and GPS devices quickly during drives

• Easy plug-and-play installation that requires no tools or professional skills

• Compatible with both 12V and 24V vehicle electrical systems for broad vehicle support

• Stylish and lightweight design that fits universally in most car interiors

Who Is This For

- Drivers who want to monitor their car battery voltage to avoid unexpected breakdowns

• Car owners who need a reliable USB charging port for their phone or tablet while driving

• Anyone who wants to keep an eye on their vehicle's interior temperature, especially in extreme weather

Usage Scenario

James was on a long road trip when his car battery suddenly died at a rest stop. After getting a jumpstart, he bought this 3 in 1 monitor. Now, every time he starts his car, he checks the voltmeter display to confirm the battery is charging properly. He also uses the USB port to keep his phone charged for navigation, and the thermometer tells him when the cabin is getting too hot for his dog. One small device gives him peace of mind on every trip.

Micro Comparison

Many cars have a built-in cigarette lighter but no battery voltage readout or temperature gauge. Dedicated voltmeters require wiring and professional installation. This single unit gives you three useful functions in one plug-and-play device. It eliminates the need for separate chargers and monitors, saving space and simplifying your setup.

Specifications

Type: Car Voltmeter Thermometer USB Charger

Model Number: VST-706

Material: ABS + Electronic Components

Voltage: 12/24V

USB Output: 5V/2.1A

Display: Digital display

Measuring Range: 9 to 80°C

Installation Position: Car interior

Vehicle Brand/Model: Universal

Product Color: Black

Display Color Options: Red + Red, Red + Blue, Red + Green

Product Size: 75 x 47 x 47mm / 2.95 x 1.85 x 1.85 in

Net Weight: 33g

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x 3 in 1 Car LED Digital Voltmeter Gauge + Thermometer + USB Charger

Why You Will Love It

You get a complete car monitoring and charging solution in one small device. It helps you catch battery problems early, keeps your devices powered, and tells you the cabin temperature. No wiring, no hassle, just plug it in and drive with confidence.

Questions and Answers

Question: Does this work with a 24V truck battery?

Answer: Yes, it works with both 12V and 24V vehicle electrical systems, including cars, trucks, RVs, and boats.

Question: Can I see the temperature and voltage at the same time?

Answer: The digital display shows both readings on the LED screen, so you can monitor voltage and temperature simultaneously.

Question: How do I install this in my car?

Answer: Simply plug it into your vehicle's cigarette lighter or 12V/24V power socket. No tools or professional help needed.

Question: Will this drain my car battery when the car is off?

Answer: The device is designed with low power consumption and will not drain your battery when not in active use.

Question: What colors does the display come in?

Answer: You can choose from three display color options: red and red, red and blue, or red and green.

Question: Is it compatible with all car brands?

Answer: Yes, it is universal and fits most car, truck, and SUV models that have a standard 12V or 24V power socket.

Keep your engine running smoothly and avoid unexpected breakdowns. This 3-in-1 car meter kit puts three critical gauges in one sleek, 52mm triple gauge set. Monitor your water temperature, oil pressure, and voltage at a glance for safer driving.

This triple gauge cluster is built for drivers who want real-time engine data. It combines a water temp gauge, a voltmeter, and an oil press gauge into a single, easy-to-install unit. The black chrome bezel gives your dashboard a professional, custom look.

Each gauge features a white dial with a red needle for quick reading. The illuminated display is easy to see in bright sunlight or at night. The metal frame is built to last, and the set comes with the accessories you need for installation.

This gauge set works with most 12V and 24V vehicles. It is a practical upgrade for cars, trucks, and marine applications where keeping an eye on engine vitals matters.

Key Features and Benefits

- 3-in-1 gauge kit that includes water temp, volt, and oil press meters so you monitor three critical engine functions from one cluster

• White dial with red needle that provides clear, accurate readings for safer driving

• Illuminated display that remains easy to read in both sunny and dim conditions

• High-quality metal frame and black chrome bezel that offer long-lasting durability and a stylish dashboard look

• Universal fit for most 12V/24V cars, trucks, and marine vehicles for broad compatibility

• Complete with necessary accessories for straightforward installation

Who Is This For

- Car enthusiasts who want to upgrade their dashboard with a professional triple gauge set

• Truck owners who need to monitor engine oil pressure and coolant temperature on long hauls

• Boat owners looking for a reliable water temp and voltage gauge for marine engines

• DIY mechanics who prefer a complete gauge kit with easy installation

Usage Scenario

Mark was driving his classic truck on a long highway trip when he noticed the engine temperature climbing. His old warning light had failed before. With this triple gauge set installed, he saw the water temp needle rise early, pulled over, and fixed a slow coolant leak before it became a major repair. The voltmeter also confirmed his alternator was charging correctly, giving him peace of mind for the rest of the drive.

Micro Comparison

Unlike single gauges that require separate mounting and wiring, this 3-in-1 kit combines three essential meters into one compact cluster. It saves dashboard space and simplifies installation. The black chrome bezel offers a more refined look than basic plastic gauge holders.

Specifications

Measurement Range: Volt gauge 8-16V, Water temp gauge 100-280 F, Oil press gauge 0-100 Psi

Dimension: 180mm * 65mm

Gauge Size: 52mm

Bezel: Black Chrome

Dial: White with red needle

Compatibility: 12V/24V vehicles

Package Includes

- 1X Triple Gauge Set

Keep your vehicle's cabin comfortable and your electrical system in check with this 3-in-1 car temperature clock and voltmeter. It combines a precise time display, internal and external temperature readings, and a real-time voltage monitor in one compact, easy-to-read unit. The luminous digital display adjusts automatically, so you can see key information clearly whether you are driving at night or in bright daylight.

This multifunctional module is designed for drivers who want to stay informed without cluttering their dashboard. It uses a high-precision time chip for accurate timekeeping and includes two waterproof temperature probes to measure conditions both inside and outside your car. The voltmeter function helps you monitor your battery and charging system, giving you peace of mind on every trip.

Installation is straightforward with the included mounting screws, and the device fits into a standard 19.5 x 56 mm opening. You can choose between three display colors and adjust the brightness to suit your preference. Whether you drive a car, truck, SUV, or recreational vehicle, this tool helps you manage your environment and vehicle health with a quick glance.

This temperature gauge is built from durable ABS plastic and operates on a wide voltage range of 5 to 28V DC. It is a practical addition for anyone who wants to monitor their vehicle's temperature and voltage without installing multiple separate gauges.

Key Features and Benefits

- 3-in-1 functionality that combines a clock, thermometer, and voltmeter, reducing dashboard clutter while keeping essential information at hand.

• High-precision RX8025T time chip with temperature compensation that maintains accurate time regardless of weather conditions.

• Two waterproof temperature probes (0.3 m and 1.5 m) that let you measure both interior and exterior temperatures, helping you adjust your climate control for comfort.

• Automatic brightness adjustment with three manual levels that ensures the display is always readable, from bright sunlight to dark night driving.

• Wide operating voltage range of 5-28V DC that makes it suitable for cars, trucks, off-road vehicles, agricultural vehicles, and boats.

Who Is This For

- Daily commuters who want to monitor their car battery voltage and avoid unexpected breakdowns caused by a failing alternator or battery.

• Long-distance drivers and road trip enthusiasts who need to track both cabin and outside temperatures for a more comfortable journey.

• Off-road and agricultural vehicle owners who require a durable, easy-to-read gauge that works in rugged conditions and wide temperature ranges.

Usage Scenario

Sarah drives a 10-year-old truck for her daily commute and weekend camping trips. She noticed the dashboard clock was always wrong and had no way to check her battery voltage. After installing this 3-in-1 unit, she can see the exact time, monitor her battery level to avoid getting stranded, and check the outside temperature before heading into the mountains. The auto-brightness feature keeps the display clear without blinding her at night.

Micro Comparison

Unlike basic car clocks that only show the time, this module adds temperature and voltage monitoring without requiring separate gauges. Many standalone voltmeters lack temperature probes, and simple thermometers do not track battery health. This all-in-one solution saves space and provides more useful data for the same installation effort.

Specifications

- Material: ABS

• Product size: 58 x 22 mm / 2.3 x 0.9 in

• Installation opening size: 19.5 x 56 mm / 0.8 x 2.2 in

• Operating voltage: DC 5-28V

• Temperature display range: -35 to 120 °C (error ±1 degree)

• Voltage display range: 5.0 to 28 V (error ±0.1V)

• Housing color: Black

• Font display colors: Red, Blue, Green (selectable)

• Item weight: 30 g

• Probe length: 0.3 m + 1.5 m (two waterproof probes)

Please allow 1-2 cm / 0.4-0.8 in difference due to manual measurement.

Package Includes

- 1 x Car Thermometer Voltmeter

Why You Will Love It

You will appreciate knowing your battery is healthy and your cabin is at the right temperature without adding bulky equipment to your dashboard. The luminous display and simple installation make it a practical upgrade for almost any vehicle. It gives you the confidence to drive farther and stay comfortable, all from one compact device.

Questions and Answers

Question: Can I install this in a 12V car?

Answer: Yes, it works on DC 5-28V, so it is compatible with standard 12V car electrical systems.

Question: How do I switch between the clock, temperature, and voltage displays?

Answer: The unit can display a single item or cycle through them automatically. You can customize which items are shown using the control settings.

Question: Are the temperature probes waterproof?

Answer: Yes, both probes are waterproof, so you can place one outside the vehicle to measure external temperature without damage.

Question: What colors can the display show?

Answer: You can choose between red, blue, or green font colors to match your dashboard style or preference.

Question: Does the brightness adjust on its own?

Answer: Yes, it has an auto-brightness function that senses ambient light and adjusts the display brightness for clear visibility day and night.

Monitor your vehicle's battery health and cabin temperature at a glance with this compact 3-in-1 car thermometer and voltmeter. It combines a digital clock, a high-precision temperature gauge, and a voltage meter into one easy-to-install device. Designed for 12V systems, this accessory helps you keep an eye on your car's electrical status and interior climate without cluttering your dashboard.

This multifunctional gauge displays real-time voltage from 5.0 to 28 volts and temperature from -35 to 120 degrees Celsius. The large, luminous digits are easy to read in bright sunlight or at night, so you always have critical information visible. Its compact ABS housing fits neatly into a standard 19.5 x 56 mm opening, making it a simple upgrade for most vehicles.

Built for durability, this automotive tool works in cars, trucks, off-road vehicles, agricultural vehicles, and ships. The voltage error is within ±0.1V, and the temperature error is within ±1 degree, giving you reliable data you can trust. Whether you are monitoring a cold start or checking alternator output, this device provides the feedback you need to drive with confidence.

Installation is straightforward with the included wiring. Choose between red, blue, or green font display options to match your dashboard style. This is a practical, no-fuss solution for any driver who wants to stay informed about their vehicle's condition.

Key Features and Benefits

- 3-in-1 display shows voltage, temperature, and time so you monitor three critical metrics from one compact device.

• High precision with ±0.1V voltage error and ±1°C temperature error gives you accurate readings you can rely on.

• Luminous digital display with red, blue, or green font options ensures clear visibility in all lighting conditions.

• Wide operating voltage range from DC 5-28V works with most 12V car, truck, and marine electrical systems.

• Compact ABS housing measuring 58 x 22 mm / 2.3 x 0.9 in fits easily into a standard dashboard slot without taking up extra space.

• Temperature range from -35 to 120°C covers extreme cold and hot environments for year-round monitoring.

Who Is This For

- Everyday drivers who want to keep an eye on battery voltage and cabin temperature without a complex setup.

• Truck and off-road vehicle owners who need a rugged, reliable gauge that can handle vibration and temperature extremes.

• Boat operators looking for a simple 12V voltmeter and thermometer for marine use.

• DIY car enthusiasts installing a clean, multifunctional gauge in a standard 19.5 x 56 mm cutout.

Usage Scenario

Mike noticed his truck was getting harder to start on cold mornings. He installed this 3-in-1 thermometer voltmeter in the dash and could immediately see the battery voltage dropping below 12V before startup. The temperature reading also showed the cabin was below freezing. Now he monitors the gauge daily and knows exactly when the battery needs charging or replacement. The clock keeps his dashboard clean, and the red display matches his interior perfectly.

Micro Comparison

Unlike single-function gauges that require separate installations for voltage and temperature, this all-in-one unit saves space and wiring time. Its ±0.1V accuracy is comparable to dedicated voltmeters, while the built-in clock eliminates the need for a separate dashboard clock. The optional red, blue, or green display lets you customize the look to match your vehicle's interior, which most basic gauges do not offer.

Specifications

Material: ABS

Housing Color: Black

Font Display: Red, Blue, Green (optional)

Operating Voltage: DC 5-28V

Installation Opening Size: 19.5 x 56 mm / 0.8 x 2.2 in

Temperature Display Range: -35 to 120°C (error ±1°C)

Voltage Display Range: 5.0 to 28 V (error ±0.1V)

Product Size: 58 x 22 mm / 2.3 x 0.9 in

Weight: 30 g

Package Includes

- 1 x Car Thermometer Voltmeter

Why You Will Love It

You get three essential driving tools in one small, affordable package. The bright display looks great on any dashboard and gives you peace of mind about your battery and engine temperature. It is a simple upgrade that makes a real difference in how you care for your vehicle.

Questions and Answers

Question: Does this voltmeter work with a 24V system?

Answer: No, it is designed for DC 5-28V systems. It works best with standard 12V car and truck electrical systems.

Question: Can I change the font color after installation?

Answer: Yes, you can select red, blue, or green display during installation. The color is set by a physical option on the unit.

Question: How do I install this gauge?

Answer: You need a 19.5 x 56 mm cutout in your dashboard. Connect the power wires to a 12V source and ground. The unit slides into the opening and stays in place.

Question: Will this work in a boat?

Answer: Yes, it is suitable for ships and marine use as long as the electrical system is 12V DC.

Question: Is the temperature sensor built in or external?

Answer: The temperature sensor is built into the unit. It measures the ambient temperature around the gauge location.

This 3 in 1 ceramic coating spray gives your car a deep, glossy shine while adding a protective layer that repels water and dirt. It works on paint, glass, and wheels, making it a simple all-in-one solution for car care enthusiasts.

This auto nano ceramic coating uses hydrophobic polymers and SiO2 nanoparticles to create a strong water beading effect. The spray formula is easy to apply without heavy surface prep, and it helps remove dirt, grime, bird droppings, bugs, and mud on contact. It also helps repair light scratches and swirls, restoring the look of older paint or protecting a new finish.

Each application delivers a diamond-like protective coating that can last for months. The spray is versatile enough for cars, boats, motorbikes, caravans, quads, and other painted or glass surfaces. It reduces the need for frequent waxing and makes future washes quicker and easier.

This ceramic coating is a practical choice for anyone who wants professional-looking results at home. It saves time and effort while keeping your vehicle looking clean and protected in all weather conditions.

Key Features and Benefits

- Hydrophobic SiO2 nanoparticles that create strong water beading and all-weather protection

• Spray-on application that removes dirt, grease, and stubborn stains in seconds

• Scratch repair properties that help restore old paint and protect new paint from swirls

• Versatile formula suitable for paint, glass, wheels, and other vehicle surfaces

• Long-lasting coating that reduces the need for frequent reapplication

Who Is This For

- Car owners who want a quick, durable shine without professional detailing

• DIY enthusiasts looking for an easy spray-on ceramic coating for home use

• Boat, motorcycle, and caravan owners who need multi-surface protection

• Anyone wanting to restore faded paint or protect a fresh paint job from scratches

Usage Scenario

After a long road trip, your car's paint is covered in bug splatter and road grime. Instead of spending an hour with multiple products, you grab this 3 in 1 ceramic coating spray. A few sprays on each panel, a quick wipe with the included towel, and the dirt lifts away instantly. The paint looks deeper and glossier than before, and water now beads up and rolls off the surface. The whole process takes under 15 minutes, and the protection lasts for months.

Micro Comparison

Traditional car waxes often require buffing and reapplication every few weeks. This ceramic coating spray uses SiO2 nanoparticles to form a harder, more durable layer that lasts much longer. It also cleans and protects in one step, unlike separate wash and wax products that take more time and effort.

Specifications

- Volume: 100 ml

• Weight: 152 g

• Special Features: Cleaning, paint protection, restoration, polishing

• Spray Bottle Size: 171 x 73 x 38 mm / 6.7 x 2.9 x 1.5 in

• Sponge Size: 70 x 30 x 17 mm / 2.8 x 1.2 x 0.7 in

• Towel Size: 200 x 200 mm / 7.9 x 7.9 in

• Suitable for: Cars, boats, motorbikes, caravans, quads, paint, glass, and all other coverings

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x Spray

• 1 x Sponge

• 1 x Towel

Why You Will Love It

You get a deep, mirror-like shine without spending hours waxing. The hydrophobic coating makes rain and mud slide right off, so your car stays cleaner longer. It is a simple way to give your vehicle professional-grade protection and gloss at a fraction of the cost.

Questions and Answers

Question: How long does the coating last after one application?

Answer: The ceramic coating can last for several months, depending on weather and washing habits. Many users see protection for up to a year or more.

Question: Can I use this on my car's windshield and windows?

Answer: Yes, the formula is designed for glass as well as paint and wheels. It creates a hydrophobic layer that helps water bead off windshields.

Question: Do I need to polish or prep the surface before applying?

Answer: No heavy prep is needed. Just make sure the surface is clean and dry. The spray works on contact to remove light dirt and grime.

Question: Will this product remove existing scratches?

Answer: It helps repair light scratches and swirl marks. Deep scratches may not be fully removed, but the coating fills minor imperfections and restores gloss.

Question: Is this safe to use on matte paint finishes?

Answer: This product is designed for glossy paint, glass, and wheels. It may alter the appearance of matte finishes, so test on a small area first if unsure.

Monitor your engine's vital signs with a single, compact gauge. This 3 in 1 digital unit displays water temperature, oil pressure, and voltage in real time, helping you catch problems before they lead to costly repairs. Built for durability and easy installation, it is a smart upgrade for any vehicle or boat dashboard.

This gauge combines three essential readings into one 52mm housing, saving space and simplifying your dash layout. It uses a reliable MCU for stable performance and features a high-brightness LED backlight for clear visibility day or night. The IP67 rating means it is fully protected against dust and water, so it can handle tough environments like engine bays or marine cabins. Built-in alarms give you an extra layer of safety by alerting you when readings go outside safe ranges.

Key Features and Benefits

- Three-in-one display that shows water temperature, oil pressure, and voltage on a single gauge, reducing dashboard clutter.

• Built-in alarm system that triggers alerts for high water temperature, low oil pressure, and low voltage, helping you avoid engine damage.

• IP67 waterproof and dustproof construction that protects the gauge in wet or dusty conditions, ensuring long-term reliability.

• 316 stainless steel housing that resists corrosion from moisture and chemicals, making it suitable for marine and automotive use.

• High-brightness LED backlight that provides clear readings in both daylight and low-light conditions, improving visibility.

• Sensor disconnect alarm that displays "OFF" if a sensor fails, so you know immediately if there is a connection issue.

Who Is This For

- Car and truck owners who want to monitor engine health with a single, space-saving gauge.

• Boat and marine enthusiasts who need a waterproof, corrosion-resistant gauge for harsh saltwater environments.

• DIY mechanics and custom builders looking for a reliable digital gauge with easy wiring and sensor compatibility.

• Fleet operators who want to add proactive engine monitoring to reduce downtime and repair costs.

Usage Scenario

Mark was driving his off-road truck through a rocky trail when he noticed the temperature reading on his new gauge climbing past 95°C. The alarm sounded, giving him enough time to pull over and let the engine cool before any damage occurred. A quick check revealed a minor coolant leak he could fix on the spot. Without the gauge, he might have driven until the engine overheated, leading to a costly repair in the middle of nowhere.

Micro Comparison

Many single-function gauges only show one reading at a time, forcing you to install multiple units or switch between displays. This 3 in 1 gauge gives you water temperature, oil pressure, and voltage all at once, so you can see the full picture without extra wiring or dashboard space. The built-in alarms also mean you do not need to buy separate alert modules, saving both money and installation time.

Specifications

Specifications

Gauge Diameter: 52mm

Material: 316 stainless steel and plastic

Water Temperature Range: 0-120°C

Oil Pressure Range: 0-10 Bar

Operating Voltage: 9-32V DC

Operating Current: ≤60mA

Operating Temperature: -20 to 70°C

Storage Temperature: -30 to 80°C

Waterproof Rating: IP67

Water Temperature Sensor Thread Sizes: 10mm, 14mm, 17mm, 21mm

Oil Pressure Sensor Thread: 1/8 NPT

Alarm Trigger: Water temp more than 95°C, Oil pressure less than 0.8 Bar, 12V system less than 11.5V, 24V system less than 22V

Package Includes

- 1 x Gauge

• 1 x Instruction Manual

• 1 x Oil Pressure Sensor

• 1 x Water Temperature Sensor

• 1 x Cable

Why You Will Love It

This gauge gives you peace of mind on every drive. Instead of guessing your engine's condition, you get clear, real-time data that helps you react before a small issue becomes a big problem. The rugged build and simple installation make it a practical tool you can rely on for years.

Questions and Answers

Question: Does this gauge work with a 12V or 24V system?

Answer: Yes, it works with both 12V and 24V systems. The operating voltage range is 9-32V DC.

Question: What sensors are included in the package?

Answer: The package includes one oil pressure sensor with a 1/8 NPT thread and one water temperature sensor with multiple thread adapters (10mm, 14mm, 17mm, 21mm).

Question: What does the alarm do if the water temperature gets too high?

Answer: The alarm triggers when the water temperature exceeds 95°C, giving you a warning to stop and check your engine before it overheats.

Question: Is this gauge waterproof?

Answer: Yes, it has an IP67 waterproof and dustproof rating, so it can handle wet conditions like rain, splashes, or marine environments.

Question: Can I use this gauge in a boat?

Answer: Yes, it is suitable for boats, cars, trucks, and other vehicles. The 316 stainless steel housing resists corrosion from saltwater and moisture.

Monitor your engine's vital signs with this 3 in 1 digital gauge. It combines a water temperature gauge, oil pressure meter, and voltmeter into a single 52mm display, giving you real-time data at a glance. Built-in alarm thresholds help you catch problems before they cause damage.

This gauge uses a 100% imported MCU for stable and reliable performance. The housing is made from 316 stainless steel and plastic, designed to resist corrosion in humid or acidic environments. With an IP67 waterproof and dustproof rating, it can handle tough conditions on the road or water.

The high-brightness LED backlight ensures the display is easy to read in any light. The unit also features a sensor disconnect alarm, showing "OFF" on the screen if a sensor fails. This gauge can match many sensor signals, including 0~190 Ω, 240~33 Ω, 0~5 V, 0.5~4.5 V, and 4~20 mA, making it versatile for different setups.

Operating voltage is 9~32 VDC, and the gauge draws ≤60 mA. It works in temperatures from -20 to 70°C and can be stored between -30 to 80°C. The package includes the gauge, wiring harness, and instruction manual. Note: the sensor is sold separately.

Key Features and Benefits

- 3-in-1 design that combines water temperature, oil pressure, and voltage monitoring in one gauge, saving dashboard space and simplifying installation

• Built-in alarm system that triggers alerts for oil temp over 108°C, water temp over 95°C, oil pressure under 0.8 bar, and voltage below 11.5V (12V system) or 22V (24V system), helping you prevent engine damage

• IP67 waterproof and dustproof rating that protects the gauge from water and debris, ensuring reliable operation in marine and off-road environments

• 316 stainless steel construction that resists corrosion in humid, acidic, or salty conditions, extending the life of the gauge

• Sensor disconnect alarm that displays "OFF" on the screen when a sensor fails, so you can quickly identify and fix the issue

• High-brightness LED backlight that provides clear visibility in bright sunlight or low-light conditions

Who Is This For

- Boat owners who need a durable, waterproof gauge to monitor engine performance in marine environments

• Off-road and 4x4 enthusiasts who want a reliable dashboard gauge that can handle dust, water, and rough conditions

• Automotive DIYers and mechanics who prefer a single-gauge solution for monitoring multiple engine parameters

• Owners of older vehicles or custom builds who want to add modern digital monitoring without replacing the entire dashboard

Usage Scenario

Mark was on a long fishing trip when his boat's warning light flickered. He had no way to tell if the engine was overheating or just a sensor glitch. After installing this 3-in-1 gauge, he saw the water temperature climbing past 90°C. The built-in alarm went off at 95°C, giving him time to throttle down and check the cooling system. Now he monitors oil pressure and voltage too, all from one gauge.

Micro Comparison

Unlike single-function gauges that require multiple units and separate wiring, this 3-in-1 design combines three critical readings into one compact 52mm display. The IP67 rating and 316 stainless steel housing give it an edge in durability over standard plastic gauges that may not hold up in wet or dusty conditions.

Specifications

- Material: 316 stainless steel + plastic

• Gauge Diameter: 52 mm

• Item Weight: 150 g

• Operating Voltage: 9~32 VDC

• Operating Current: ≤60 mA

• Operating Temperature: -20~70°C

• Storage Temperature: -30~80°C

• Waterproof Rating: IP67

• Interchange Part Number: Boat Water Temperature Gauge

Package Includes

- 1 x Gauge (sensor not included)

• 1 x Wiring Harness

• 1 x Instruction Manual

Why You Will Love It

You get three essential engine monitors in one compact gauge, freeing up dashboard space and simplifying your wiring. The built-in alarms give you peace of mind, alerting you to problems before they become costly repairs. Its rugged, waterproof design means you can trust it on the water or the trail.

Questions and Answers

Question: Does this gauge come with a sensor?

Answer: No, the sensor is sold separately. The package includes the gauge, wiring harness, and instruction manual.

Question: What voltage does this gauge work with?

Answer: It operates on 9 to 32 VDC, so it works with both 12V and 24V electrical systems.

Question: Can I use this gauge in a boat?

Answer: Yes, it has an IP67 waterproof rating and is made from corrosion-resistant 316 stainless steel, making it suitable for marine use.

Question: What does the alarm do?

Answer: The gauge has built-in alarm thresholds. It alerts you when oil temp exceeds 108°C, water temp exceeds 95°C, oil pressure drops below 0.8 bar, or voltage falls below 11.5V (12V system) or 22V (24V system).

Question: Is the backlight adjustable?

Answer: The gauge features a high-brightness LED backlight for clear visibility. The source data does not specify if brightness is adjustable.

Keep an eye on your engine's most important readings with this 3 in 1 digital gauge. It combines water temperature, oil pressure, and voltage monitoring in one 52mm unit. The bright red LED display makes it easy to read at a glance, even in direct sunlight or low light conditions. Built-in alarms alert you when readings go outside safe operating ranges, helping you catch potential problems before they cause serious damage.

This gauge is designed for a wide range of 12V and 24V vehicles, including cars, boats, trucks, and off-road vehicles. It works with an operating voltage range of 8V to 32V, giving you flexibility across different electrical systems. The 316 stainless steel construction and IP67 waterproof rating mean it can handle tough environments, from engine bays to marine dashboards, without failing due to moisture or vibration.

The gauge comes with a water temperature sensor that supports multiple thread sizes, including 1/8NPT, 3/8NPT, M14X1.5, and M16X1.5. The oil pressure sensor uses a 1/8NPT thread. The built-in MCU provides stable performance and can match many types of sensor signals, including analog signals. If a sensor disconnects, the display shows "OFF" so you know immediately that something is wrong.

Alarms are pre-set for critical conditions. The water temperature alarm triggers above 95 degrees Celsius. The oil pressure alarm triggers below 0.8 bar. For 12V systems, the voltage alarm triggers below 11.5V. For 24V systems, the voltage alarm triggers below 22V. These alarms help you stay informed without constantly watching the display.

Key Features and Benefits

- 3 in 1 design that combines water temperature, oil pressure, and voltage monitoring into one gauge, saving dashboard space and simplifying installation

• High brightness red LED display that provides clear visibility in bright sunlight and low light conditions, so you can read data at a glance

• Built-in alarm system that alerts you when water temperature exceeds 95 degrees Celsius, oil pressure drops below 0.8 bar, or voltage falls outside safe range, helping you prevent engine damage

• IP67 waterproof and dustproof rating that protects the gauge from moisture, spray, and dust in engine bays and marine environments

• 316 stainless steel construction that resists corrosion from acid, base, and humidity, ensuring long-term reliability

• Imported MCU with stable performance that supports multiple sensor signal types, including 0-190 ohm, 240-33 ohm, 0-5V, 0.5-4.5V, and 4-20mA analog signals

• Sensor disconnect alarm function that displays "OFF" when a sensor is disconnected, so you know immediately if there is a wiring issue

• Compatible with 12V and 24V systems with an operating voltage range of 8V to 32V, making it suitable for cars, trucks, boats, and off-road vehicles

Who Is This For

- Car enthusiasts who want to monitor engine health with a single, easy-to-read gauge instead of multiple separate units

• Boat owners who need a waterproof, corrosion-resistant gauge that can handle the humid and salty conditions of marine environments

• Truck and van drivers who rely on 24V electrical systems and need a gauge that works across both 12V and 24V setups

• DIY mechanics and custom builders who want a versatile gauge that supports multiple sensor thread sizes and signal types for different engine configurations

Usage Scenario

Mark was driving his classic pickup on a long highway trip when he noticed the oil pressure reading on his new gauge dropping below normal. The red LED display caught his eye immediately. He pulled over, checked the oil level, and found a slow leak. Because the gauge gave him an early warning, he was able to add oil and tighten the drain plug before the engine suffered any damage. He says the alarm system alone is worth the upgrade.

Micro Comparison

Unlike basic single-function gauges that only show one reading, this 3 in 1 unit gives you water temperature, oil pressure, and voltage all in one compact 52mm housing. Many standalone gauges lack built-in alarms, forcing you to watch the needle constantly. This gauge has pre-set alarms that alert you automatically when readings go out of range. The IP67 waterproof rating and 316 stainless steel construction also make it more durable than standard plastic-housed gauges that can fail in wet or corrosive environments.

Specifications

Gauge Diameter: 52mm / 2.0 in

Item Weight: 150g / 5.3 oz

Material: 316 stainless steel and plastic

Operating Voltage: 8V to 32V DC (compatible with 12V and 24V systems)

Operating Current: 60mA or less

Operating Temperature: -20 to 70 degrees Celsius

Storage Temperature: -30 to 80 degrees Celsius

Water Temperature Range: 0 to 120 degrees Celsius

Water Temperature Alarm: Triggers above 95 degrees Celsius

Oil Pressure Range: 0 to 10 Bar

Oil Pressure Alarm: Triggers below 0.8 Bar

Voltage Alarm (12V system): Triggers below 11.5V

Voltage Alarm (24V system): Triggers below 22V

Water Temperature Sensor Threads: 1/8NPT, 3/8NPT, M14X1.5, M16X1.5

Oil Pressure Sensor Thread: 1/8NPT

Waterproof Rating: IP67

Package Includes

- 1 x Gauge

• 1 x Sensor

• 1 x Manual

• 1 x Cable

Why You Will Love It

You get three critical engine readings in one compact gauge, which simplifies your dashboard and reduces wiring work. The bright red LED display is easy to read, and the built-in alarms give you peace of mind knowing you will be alerted if something goes wrong. The durable stainless steel and waterproof design means this gauge will last through years of use in cars, trucks, or boats.

Questions and Answers

Question: Can this gauge be used on a 24V truck system?

Answer: Yes, it works with both 12V and 24V systems. The operating voltage range is 8V to 32V, so it is suitable for trucks, vans, and other vehicles with 24V electrical systems.

Question: What thread sizes does the water temperature sensor support?

Answer: The water temperature sensor supports 1/8NPT, 3/8NPT, M14X1.5, and M16X1.5 threads. You can choose the one that fits your engine.

Question: Does the gauge come with an alarm?

Answer: Yes, it has built-in alarms. The water temperature alarm triggers above 95 degrees Celsius. The oil pressure alarm triggers below 0.8 bar. The voltage alarm triggers below 11.5V for 12V systems and below 22V for 24V systems.

Question: Is the gauge waterproof?

Answer: Yes, it has an IP67 waterproof and dustproof rating. It can handle moisture, spray, and dust, making it suitable for engine bays and marine environments.

Question: What happens if a sensor gets disconnected?

Answer: The gauge has a sensor disconnect alarm function. If a sensor is disconnected, the display will show "OFF" so you know immediately that there is a wiring issue.

Keep your truck's vital signs in clear view with this 3-in-1 LCD gauge. It combines oil temperature, water temperature, and a voltmeter into a single, easy-to-read display, helping you monitor engine health at a glance.

This multifunctional gauge is designed for trucks running on 12V or 24V systems. It comes with the necessary 1/8NPT sensor and wiring cable, so you have everything needed for installation. The compact plastic housing fits neatly on the front of your dashboard.

Having three critical readings in one unit saves space and simplifies your setup. Instead of watching separate gauges, you can check oil temp, coolant temp, and battery voltage all from one screen. This makes it easier to spot potential problems before they become serious.

The LCD display offers clear, quick readings, so you can focus on the road. Whether you are driving a heavy-duty truck or a work vehicle, this gauge provides the information you need to maintain safe operating temperatures and electrical system health.

Key Features and Benefits

- 3-in-1 LCD display that shows oil temperature, water temperature, and voltage on one screen, reducing dashboard clutter

• Comes with a 1/8NPT sensor and connecting cable for straightforward installation

• Works with both 12V and 24V electrical systems, fitting a wide range of trucks

• Compact plastic housing designed for front mounting on your dashboard

• Clear digital readout helps you monitor engine conditions at a quick glance

Who Is This For

- Truck owners who want a single gauge to monitor engine oil temp, coolant temp, and battery voltage

• Fleet managers looking for a cost-effective way to add basic engine monitoring to work vehicles

• DIY mechanics installing an aftermarket monitoring system for a 12V or 24V diesel truck

• Off-road and heavy-duty vehicle operators who need reliable temperature and voltage data

Usage Scenario

Mark drives a heavy-duty delivery truck on long highway routes. During a hot summer run, he noticed the engine temperature rising but could not tell if it was the oil or the coolant. After installing this 3-in-1 gauge, he can see both temperatures and battery voltage on one clear screen. On a recent trip, the voltmeter showed a slow voltage drop, alerting him to a failing alternator before he got stranded. Now he feels more in control of his truck's health on every shift.

Micro Comparison

Individual analog gauges take up more dashboard space and require separate wiring. This 3-in-1 LCD unit combines three critical readings into one compact display, saving space and simplifying installation. The digital readout is easier to read at night or in bright sunlight compared to traditional needle gauges.

Specifications

- Material: Plastic

• Item Height: 55 mm

• Item Length: 100 mm

• Item Width: 7 mm

• Item Weight: 150 g

• Placement on Vehicle: Front

• Sensor Thread: 1/8NPT

• Voltage: 12V / 24V

Package Includes

- 1 x 3-in-1 LCD Gauge

• 1 x 1/8NPT Sensor

• 1 x Cable

Why You Will Love It

This gauge gives you three essential engine readings in one compact unit, so you can keep an eye on your truck's health without filling your dashboard with separate meters. It is a practical, straightforward upgrade for anyone who wants better engine monitoring. The included sensor and cable mean you have everything to get started right away.

Questions and Answers

Question: Does this gauge work on both 12V and 24V trucks?

Answer: Yes, it is designed to work on both 12V and 24V electrical systems.

Question: What does the 1/8NPT sensor mean?

Answer: It means the sensor has a 1/8 inch National Pipe Thread fitting, which is a standard size for many engine ports.

Question: Is the display backlit?

Answer: The gauge features a clear LCD display, but the product specifications do not mention a backlight.

Question: Can I install this gauge myself?

Answer: Yes, the gauge comes with the sensor and cable, making it suitable for DIY installation if you have basic wiring knowledge.

Question: What materials is the gauge housing made from?

Answer: The gauge housing is made of plastic.

Give your car a showroom shine that lasts for months without spending hours detailing. This 3-in-1 ceramic coating spray combines a paint sealant, a wax polish, and a hydrophobic gloss enhancer into one simple application. It works on paint, glass, wheels, and more, creating a protective layer that repels water, dirt, and grime.

Forget complicated multi-step waxing routines. This nano-ceramic formula uses SiO2 nanoparticles to bond with your car's surface, forming a durable, diamond-like protective coating. The result is a deep, intense gloss that makes your car look freshly detailed every day. Water beads up and rolls off instantly, taking mud, bird droppings, and road salt with it.

This spray is designed for speed and convenience. Just spray it on and wipe it off with the included microfiber towel. It restores clarity to faded paint, fills in light scratches and swirl marks, and protects your clear coat from UV rays and environmental contaminants. It is a complete car care solution for anyone who wants professional-level results at home.

Whether you are maintaining a new car or reviving an older one, this ceramic coating spray delivers a noticeable upgrade. It simplifies your car washing routine and keeps your vehicle looking its best with minimal effort. A single application can protect your finish for up to a year, reducing the need for frequent waxing.

Key Features and Benefits

- 3-in-1 formula that combines a paint sealant, wax polish, and hydrophobic coating, saving you time and money on multiple products.

• Hydrophobic technology that creates strong water beading, making car washes faster and preventing water spots.

• Easy spray-on application that requires no heavy buffing or special tools, so you can detail your car in minutes.

• SiO2 nano-ceramic particles that bond to the surface for long-lasting protection against dirt, UV rays, and light scratches.

• Versatile use on paint, glass, wheels, and other hard surfaces, giving your entire vehicle a uniform gloss and protection.

Who Is This For

- Car owners who want a deep, wet-look gloss without spending hours waxing.

• DIY detailers looking for a simple, professional-grade ceramic coating they can apply at home.

• Anyone who wants to protect their car's paint from water spots, bird droppings, and road grime between washes.

• Owners of boats, motorcycles, caravans, and ATVs looking for a versatile protective coating for multiple surfaces.

Usage Scenario

After a weekend road trip, your car is covered in bug splatter and dust. Instead of a full two-hour wash and wax, you simply rinse off the loose dirt, spray this ceramic coating onto the paint and windshield, and wipe it dry with the included towel. In under ten minutes, the car not only looks clean but has a brilliant, reflective shine. The next rain shower shows tight water beads rolling off the hood, and the glass stays clearer longer. You have just protected your paint from the next buildup of grime with almost no effort.

Micro Comparison

Standard car waxes often wear off after a few weeks and require a lot of elbow grease to apply. This ceramic coating spray offers a much longer-lasting protective layer that repels water and dirt more effectively. Unlike some DIY ceramic coatings that require a complicated prep and cure process, this spray is as simple as waxing, making it a practical choice for anyone who wants real ceramic protection without the hassle.

Specifications

Item Volume: 100ml

Item Weight: 152 g

Special Features: Cleaning, paint protection, restoration, polishing

Spray Size: 171 x 73 x 38 mm / 6.7 x 2.9 x 1.5 in

Sponge Size: 70 x 30 x 17 mm / 2.8 x 1.2 x 0.7 in

Towel Size: 200 x 200 mm / 7.9 x 7.9 in

Suitable for: Cars, boats, motorbikes, caravans, quads, paint, glass, and all other coverings

Please allow 1-2 cm / 0.4-0.8 in difference due to manual measurement.

Package Includes

- 1 x Spray

• 1 x Sponge

• 1 x Towel

Why You Will Love It

You will love how this spray turns a basic car wash into a complete detailing session. It gives you that deep, glossy finish that turns heads and keeps your car looking newer for longer. The time you save not having to wax separately means more time enjoying the drive.

Questions and Answers

Question: Can I use this ceramic coating on my car's windshield and windows?

Answer: Yes, this spray is safe for glass. It creates a hydrophobic layer on the windshield that helps water bead up and roll off, improving visibility in the rain.

Question: How long does the protection last after one application?

Answer: The coating can protect your car's finish for up to a year, depending on environmental conditions and washing habits. Regular maintenance washes will help extend the life of the coating.

Question: Do I need to polish or clay bar my car before applying this spray?

Answer: For best results, the surface should be clean and dry. A thorough wash is usually enough. If the paint has heavy contamination, a clay bar treatment can help the coating bond better.

Question: Is this product safe to use on matte paint finishes?

Answer: This spray is designed for glossy surfaces and may alter the appearance of matte paint. It is best suited for standard clear coat, glass, and wheel surfaces.

Question: How do I apply the spray for the best shine?

Answer: Spray a small amount directly onto the surface or the included sponge. Spread it evenly, then immediately buff it off with the microfiber towel before it dries. Work on one small section at a time for a streak-free finish.

Keep an eye on your vehicle's battery voltage, cabin temperature, and the time with one compact device. This 3 in 1 voltmeter combines a thermometer, clock, and voltmeter into a single panel that fits neatly into your car, motorcycle, or electromobile.

The large digital display uses bright LEDs that are easy to read even in direct sunlight. You can choose to view the temperature, voltage, or time individually, or set it to cycle through each reading automatically. The display color options include red, green, or blue, so you can match it to your dashboard style.

Made from durable PP material, this device is built to handle daily use in a vehicle environment. It works with a DC power range of 5 to 27 volts, making it suitable for most 12V systems. Installation is simple with a snap-in mounting hole or by placing it in a custom position.

This tool helps you monitor your battery health and interior temperature without taking up extra space. It is a practical upgrade for anyone who wants quick access to essential vehicle data while driving.

Key Features and Benefits

- 3 in 1 design that combines a thermometer, voltmeter, and clock into one unit, saving dashboard space and reducing clutter.

• Bright LED display with red, green, or blue color options, making readings visible during the day and night.

• Customizable display mode that lets you view one item or cycle through all three, giving you control over what you see.

• Wide voltage range from DC 5V to 27V, compatible with most cars, motorcycles, and electric vehicles.

• Easy snap-in mounting or free placement, allowing flexible installation without complex tools.

Who Is This For

- Car owners who want to monitor battery voltage and cabin temperature while driving.

• Motorcycle riders looking for a compact, weather-resistant gauge to add to their handlebars.

• Electromobile users who need a simple way to check battery health and interior conditions.

• DIY enthusiasts upgrading their vehicle dashboard with a multifunctional digital display.

Usage Scenario

Mark drives an older car and noticed the battery light flickering on cold mornings. He installed this 3 in 1 voltmeter on his dashboard and now checks the voltage before starting the engine. When the display showed a drop below 12V, he knew the battery needed replacing before it left him stranded. He also uses the thermometer to keep an eye on cabin temperature during summer road trips.

Micro Comparison

Unlike single-function gauges that only show voltage or temperature, this device gives you three readings in one compact panel. It saves dashboard space and eliminates the need for multiple separate meters. The bright LED display is easier to read in daylight compared to many LCD alternatives.

Specifications

- Material: PP

• Display color: Red / Green / Blue

• Voltage: DC 5-27V

• Frame size: about 22 x 58 mm / 0.9 x 2.3 in

• Installation opening size: about 19.5 x 56 mm / 0.8 x 2.2 in

• Temperature display range: -35 to 120°C / -31 to 248°F

• Voltage display range: 5 to 28 V

• Power cord length: about 28 cm / 11.0 in

• Item weight: 29 g / 1.0 oz

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x Voltmeter

Why You Will Love It

You get three useful tools in one small device that fits almost anywhere. The bright display makes it easy to check your battery and temperature at a glance. It gives you peace of mind knowing your vehicle's health is always visible.

Questions and Answers

Question: Will this work on a 12V motorcycle battery?

Answer: Yes, it works on DC 5V to 27V systems, so it is compatible with most 12V motorcycles.

Question: Can I change the display color after installation?

Answer: The display color is fixed based on the version you choose. You can select red, green, or blue when ordering.

Question: Does it show the temperature inside the car or outside?

Answer: The thermometer measures the temperature near the device, which is typically the interior cabin temperature.

Question: How do I mount this on my dashboard?

Answer: You can snap it into a mounting hole or place it in a custom position using the provided design.

Question: Is the display bright enough to read in direct sunlight?

Answer: Yes, the LED display is designed to be bright and clear even during the day.

Restore your car's shine with this 11-piece car polishing kit. Designed for use with a standard electric drill, these foam sponge pads make light work of buffing, polishing, and cleaning your vehicle's surfaces. Whether you are tackling dull paint or hazy headlights, this set provides the right pad for the job.

Each pad is made from durable sponge material. This construction allows for effective polishing without scratching the surface. The set includes a variety of abrasive discs, so you can choose the right level of cut for your specific task. From heavy compounding to final finishing, these pads help you achieve a smooth, glossy result.

The pads attach easily to your drill, turning it into a powerful polishing tool. This simple setup saves you time and effort compared to hand polishing. You can quickly switch between pads to move through the different stages of the detailing process.

This kit is a practical solution for anyone who wants professional-looking results at home. It is ideal for car enthusiasts, DIY detailers, and anyone looking to refurbish old headlights or remove light scratches from their vehicle's paintwork.

Key Features and Benefits

- Versatile 11-piece set that includes a range of sponge pads for cutting, polishing, and finishing.

• Designed for use with an electric drill, which provides power and speed for efficient polishing.

• Made from durable sponge material that is long-lasting and gentle on surfaces.

• Effective polishing action that helps remove oxidation, light scratches, and swirl marks.

• Easy to use design that makes car detailing accessible for beginners and experienced users alike.

Who Is This For

- Car owners looking to restore the shine to their vehicle's paintwork.

• DIY enthusiasts who want to polish their car at home without expensive equipment.

• Anyone needing to refurbish cloudy or yellowed plastic headlights.

• Detailers who need a convenient set of drill-mounted pads for quick touch-ups.

Usage Scenario

Mark noticed his car's paint had lost its luster after a long winter. He also saw that his headlights were looking foggy. Instead of paying for a professional detail, he decided to try this polishing kit. He attached a cutting pad to his drill, applied some compound, and worked on a small section of the hood. The pad removed the dull layer quickly, revealing a much deeper shine. He then switched to a finishing pad to polish the headlights. After a few minutes, they were clear and bright again. Mark was surprised at how easy it was to get such great results.

Micro Comparison

Hand polishing can be tiring and often does not provide enough pressure or speed to remove deeper imperfections. This drill-mounted kit solves that problem by giving you power and control. Compared to a full-sized rotary polisher, this kit is much more affordable and easier to store, making it a practical choice for home use.

Specifications

Material: Sponge

Package Includes

- Car polishing set of 11 pads

Why You Will Love It

This kit turns your ordinary drill into a powerful detailing tool. You will love how quickly you can restore a deep, glossy shine to your car's paint and headlights. It is a simple and satisfying way to make your vehicle look its best again.

Questions and Answers

Question: What is included in this polishing kit?

Answer: The package includes a car polishing set of 11 sponge foam pads.

Question: Can I use these pads with any drill?

Answer: Yes, these pads are designed to be used with a standard electric drill.

Question: What is the material of the pads?

Answer: The pads are made from sponge foam material.

Question: Can this kit be used to polish headlights?

Answer: Yes, this kit is effective for refurbishing and polishing plastic headlights.

Question: Is this kit suitable for beginners?

Answer: Yes, the pads are easy to attach and use, making them suitable for beginners and experienced users.

This set of three 10ml aromatherapy oils is designed to keep your car smelling fresh with a long-lasting natural fragrance. It works as a refill liquid for your car perfume diffuser, offering a simple way to maintain a pleasant aroma during your drives.

Each glass bottle contains a concentrated essential oil blend that releases a steady scent over time. You can adjust the intensity by controlling how much oil you use in your diffuser, giving you the flexibility to create a light background scent or a more noticeable fragrance. The oils are easy to refill and swap out when you want a change.

Made with care for daily use, these oils are a practical choice for anyone who wants to keep their vehicle smelling clean and welcoming. The compact 10ml size makes them easy to store in your glove compartment or cup holder, so you always have a refill on hand.

Whether you prefer a fresh, woody, or classic scent, this variety pack lets you find the mood that suits your drive. Just add a few drops to your car diffuser and enjoy a consistently fresh cabin.

Key Features and Benefits

- Long-lasting fragrance capsules that provide a continuous and pleasant scent experience throughout your drive.

• Keeps your car smelling fresh and helps eliminate unwanted odors.

• Adjustable concentration lets you control the intensity of the aroma to match your preference.

• Compact 10ml glass bottles are easy to refill and store.

• Natural essential oil blend for a clean and refreshing fragrance.

Who Is This For

- Drivers who want a simple way to keep their car smelling fresh.

• Anyone looking for a refill liquid for their existing car perfume diffuser.

• People who prefer natural fragrance oils over synthetic air fresheners.

• Those who like to switch between different scents regularly.

Usage Scenario

Mark spends a lot of time commuting for work, and his car often picks up smells from coffee, fast food, and the gym. He tried hanging air fresheners, but they faded quickly and left a chemical smell. He picked up this set of three 10ml aromatherapy oils to refill his car diffuser. Now, he adds a few drops of the white tea scent in the morning and enjoys a clean, subtle fragrance all day. The long-lasting formula means he doesn't have to worry about it fading before his drive home.

Micro Comparison

Unlike disposable hanging fresheners that lose their scent in a few days, this refill oil delivers a steady, long-lasting aroma that you can control. The natural essential oil blend provides a cleaner fragrance compared to synthetic sprays, and the adjustable concentration lets you decide how strong you want the scent to be.

Specifications

Item Type: Air Freshener

Item Volume: 10ml per bottle

Material: Glass bottle

Fragrant Object Form: Essential oil

Is Electric: No

Functional Features: Adjustable concentration

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 3 Pcs x 10ml Aromatherapy oil

Why You Will Love It

You will love how easy it is to keep your car smelling fresh without any complicated setup. The long-lasting formula means you can refill less often, and the variety of scents lets you change the mood whenever you want. It is a simple upgrade that makes every drive more enjoyable.

Questions and Answers

Question: How do I use these oils in my car?

Answer: Simply add a few drops to your car's aroma diffuser or a compatible refillable air freshener. The oil will slowly release its fragrance over time.

Question: How long does one 10ml bottle last?

Answer: The duration depends on how many drops you use and your diffuser's settings. Typically, a few drops can last for several days of regular driving.

Question: Are these oils safe for all car diffusers?

Answer: Yes, they work with most standard car aroma diffusers that accept liquid essential oils. Check your diffuser's instructions for guidance.

Question: What scents are included in this pack?

Answer: The pack includes a variety of scents such as White tea, Sea water taste, Luxury, medium strong fragrance, OILXGLL, and Cologne. The exact scent selection may vary.

Question: Can I use these oils outside the car?

Answer: Yes, you can use them in any small area diffuser or as a room fragrance refill. They are not limited to car use only.

Keep your vehicle's vital signs in check with this 3-in-1 digital gauge. It displays oil pressure, water temperature, and battery voltage on a clear LCD screen, helping you monitor engine health at a glance. Designed for cars, trucks, SUVs, and RVs, this universal instrument works with a wide 9-36V power supply.

This gauge combines three essential readouts into one compact unit. The digital LCD display makes it easy to see your oil pressure, coolant temperature, and voltage levels without guessing. It is built for easy installation and delivers precise, stable readings to help you catch potential problems early.

The gauge includes a self-learning function that adapts to your vehicle's oil float resistance. It also features an anti-shake design for the oil level reading, so the display stays accurate even on bumpy roads. When voltage runs too high or too low, the screen flashes an alarm to alert you.

Whether you drive a daily commuter, a work truck, or an off-road vehicle, this gauge provides reliable data in a simple, space-saving format. It performs well in a range of temperatures and is built to handle the vibrations of regular driving.

Key Features and Benefits

- 3-in-1 digital display that shows oil pressure, water temperature, and voltage in one screen for quick monitoring

• Wide 9-36V working voltage that fits most cars, trucks, SUVs, and RVs without extra adapters

• Self-learning function that automatically matches your vehicle's oil float resistance for accurate readings

• Anti-shake oil level feature that keeps the display stable during bumps and rough roads

• Flashing voltage alarm that warns you when power is too low or too high to prevent damage

• Easy installation with included sensors and screws for a straightforward setup

Who Is This For

- Car owners who want a simple way to track engine oil pressure and coolant temperature

• Truck and RV drivers who need reliable gauge readings during long trips

• DIY mechanics adding aftermarket monitoring to their vehicle's dashboard

• Off-road enthusiasts who drive on rough terrain and need stable, accurate data

Usage Scenario

Mark drives his old SUV on weekend camping trips. He noticed the temperature gauge on his dashboard was not reliable. After installing this 3-in-1 gauge, he can see the exact water temperature and oil pressure on a bright digital display. On a bumpy forest road, the reading stayed steady, and the voltage alarm gave him peace of mind when he ran the winch. Now he checks the gauge before every trip.

Micro Comparison

Many single-function gauges require separate units for oil pressure, temperature, and voltage. This 3-in-1 model combines them into one compact display, saving dashboard space and reducing wiring. Its self-learning oil float feature also sets it apart from basic gauges that need manual calibration.

Specifications

Material: Plastic shell

Color: Black

Working Voltage: 9-36V

Working Temperature: -40 to 50°C / -40 to 122°F

Power Cable Length: approx. 50 cm / 19.7 in

Voltage Test Range: 9-39V, Accuracy: ±0.1%

Water Temperature Measurement Range: -10 to 120°C / 14 to 248°F, Accuracy: ±0.1%

Oil Test Range: 0-1.0 MPa, Accuracy: ±0.1%

Water Temperature Sensor Thread: M10

Oil Pressure Sensor Thread: 1/8 NPT

Measurement Speed: 3-5 seconds

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x Car Instrument

• 2 x Screws

Why You Will Love It

You will appreciate having three critical engine readings in one easy-to-read display. The self-learning setup saves you time, and the anti-shake design keeps data reliable on any road. It is a practical upgrade for anyone who wants to stay informed about their vehicle's condition.

Questions and Answers

Question: Can I install this gauge myself?

Answer: Yes, installation is designed to be straightforward. The gauge comes with sensors and screws, and the power cable connects to your vehicle's 9-36V system.

Question: Does this gauge work on a 12V car?

Answer: Yes, it works on 12V systems as well as 24V systems. The working voltage range is 9-36V, covering most cars, trucks, and RVs.

Question: What does the flashing alarm mean?

Answer: The alarm flashes when the voltage is lower than 10V, between 16-20V, or above 31V. This alerts you to potential electrical issues.

Question: Will the gauge stay accurate on bumpy roads?

Answer: Yes, the oil level reading has an anti-shake function that keeps the display stable even when the vehicle hits bumps or rough terrain.

Question: Does the gauge need calibration for my vehicle?

Answer: No, the gauge has a self-learning function that automatically adapts to your vehicle's oil float resistance, so no manual calibration is needed.

Keep your devices charged and your car's electrical system in check with this 4 in 1 car charger. It features a clear LCD display that shows real-time voltage, current, and temperature, so you always know what is happening. With dual USB ports and a total output of 3.1A, it can charge two devices at once quickly and efficiently.

This charger is built for convenience and safety. The smart LCD screen lets you monitor your car's battery voltage and the charging current, helping you spot potential issues early. The built-in temperature sensor adds an extra layer of protection by alerting you to overheating, making it a reliable tool for any driver.

Designed to fit most vehicles, this adapter works with standard 12-24V DC systems. Its compact size means it won't stick out too far from the socket, and the fixed support keeps it stable while you drive. Whether you are on a long road trip or just commuting, this charger provides a simple way to power your electronics.

This charger is compatible with a wide range of devices, including smartphones, tablets, GPS units, and MP3 players. It is optimized to deliver fast charging speeds for devices like iPhones and iPads, giving you a full charge without the wait.

Key Features and Benefits

- Dual USB 3.1A output that allows you to charge two devices simultaneously at high speed.

• LCD digital display that shows voltage, current, and temperature for easy monitoring.

• Temperature measurement range from -20 to +80 degrees Celsius that helps prevent overheating.

• Voltage measuring range from 5 to 25V that lets you check your car battery's health.

• Fixed support design that keeps the charger stable and secure in your vehicle's socket.

• 10A protection tube that adds a safety layer against power surges.

Who Is This For

- Drivers who want to monitor their car battery voltage and charging system.

• Travelers who need to charge multiple devices like phones and GPS units on the go.

• Anyone who wants a compact and stable car charger that won't wiggle loose.

• Users who prefer a smart charger with a clear display for real-time feedback.

Usage Scenario

Tom was on a weekend road trip when his phone battery dropped to 10%. He plugged his phone and his passenger's tablet into this dual USB charger. While they charged, he glanced at the LCD screen and noticed his car's voltage was a bit low. The charger's display helped him catch a weak battery early, saving him from a potential breakdown later.

Micro Comparison

Many basic car chargers just plug in and provide power with no feedback. This model goes further by giving you a live readout of voltage, current, and temperature. It also includes a 10A protection tube for added safety, making it a more informed choice for drivers who want to keep an eye on their car's electrical health.

Specifications

Material: ABS

Input Voltage: DC 12-24V (Error of plus or minus 0.2V)

Output Voltage: DC 5V (Error of plus or minus 0.1A)

Output Current: 3.1A

Voltage Measuring Range: 5-25V

Current Measuring Range: 0.1A-3.1A

Temperature Measurement Range: -20 degrees to +80 degrees (Error of plus or minus 1 degree)

Conversion Efficiency: 95%

Size: 42mm x 78mm x 20mm / 1.65 x 3.07 x 0.79 inches (Approx.)

Weight: 30g

Size Guide

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x 4 in 1 Car Charger

Why You Will Love It

You will appreciate the peace of mind that comes from seeing your car's voltage and charging current at a glance. The dual USB ports mean you and a passenger can both power up without fighting over a single socket. It is a small upgrade that makes every drive more convenient and informed.

Questions and Answers

Question: Can I use this charger with my iPhone and Android phone at the same time?

Answer: Yes, the dual USB ports allow you to charge two devices simultaneously, including iPhones and Android phones.

Question: Does the LCD display show the temperature inside the car?

Answer: Yes, the display shows the temperature in real time, with a measurement range from -20 to +80 degrees Celsius.

Question: Will this charger fit in a 12V car socket?

Answer: Yes, it works with standard 12-24V DC systems found in most cars, trucks, and SUVs.

Question: How do I know if my car battery voltage is low?

Answer: The LCD screen shows the voltage reading. If it drops below 12V when the engine is off, your battery may need attention.

Question: Is the charger safe to use in hot weather?

Answer: Yes, it includes a temperature sensor and a 10A protection tube, and it can operate in temperatures up to 80 degrees Celsius.

Monitor your engine's performance with a clear and responsive 3.75-inch tachometer. This universal gauge is designed to work with 4, 6, and 8-cylinder engines, providing accurate RPM readings from 0 to 8,000. The built-in shift light alerts you when your preset RPM is reached, helping you optimize gear changes for better control.

This tachometer features a classic analog display with a white dial and a red needle for easy reading at a glance. The housing is finished in a sleek black and carbon fiber style, giving your dashboard a clean, performance-oriented look. It operates on a standard 12V electrical system, making it a straightforward addition to most vehicles.

Installation is simplified with the included mounting hardware and instruction manual. The gauge is built from durable plastic and metal components, ensuring it can withstand the vibrations and conditions of daily driving. Whether you are upgrading your project car or replacing a worn-out gauge, this tachometer delivers reliable feedback.

The integrated shift light is a key feature for drivers who want to maximize engine output. By setting the RPM threshold, you receive a visual cue to shift at the ideal moment. This helps prevent over-revving and supports smoother acceleration, whether you are on the track or the street.

Key Features and Benefits

- Universal compatibility for 4, 6, and 8-cylinder engines that allows you to install this gauge in a wide range of vehicles without needing a specific model.

• Built-in shift light that provides a clear visual alert when the engine reaches your preset RPM, helping you time gear changes for better performance.

• 3.75-inch diameter dial with a white face and red pointer that makes RPM readings easy to see, even in bright or low-light conditions.

• Sturdy construction using plastic and metal materials that ensures the gauge can handle engine vibrations and last through regular use.

• Simple 12V electrical connection that makes installation straightforward for DIY enthusiasts and professional mechanics alike.

Who Is This For

- Car enthusiasts working on a project vehicle who need a reliable and affordable tachometer to monitor engine speed.

• Drivers of older cars or trucks that did not come with a factory tachometer and want to add one for better driving awareness.

• Anyone upgrading their dashboard instrumentation with a gauge that includes a shift light for more precise driving.

• Off-road or track-day users who require a durable RPM gauge that can handle varied driving conditions.

Usage Scenario

Mark had just finished rebuilding the engine in his classic coupe. The original dashboard did not have a tachometer, so he was guessing when to shift. After installing this 3.75-inch gauge, he could finally see exactly where the RPMs were. On his first test drive, the shift light came on right as he approached the power band, letting him shift smoothly. The white dial was easy to read even in the afternoon sun, and the black carbon fiber look matched his interior perfectly.

Micro Comparison

Compared to basic tachometers that only show RPM, this gauge adds a programmable shift light for more active driving feedback. Its 3.75-inch size is larger than many standard 2-inch gauges, making it easier to read at a quick glance. The combination of plastic and metal construction offers a good balance of weight savings and durability for everyday use.

Specifications

Material: Plastic + Metal

Color: Carbon Fiber, Black

Diameter: 3.75 in / 95 mm

Voltage: 12V

Reads Range: 0 to 8,000 RPM

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x Tachometer

• 1 x Installation Instruction

• 1 x Package of Fittings

Why You Will Love It

You will appreciate the confidence of knowing your engine's exact RPM at all times. The shift light takes the guesswork out of gear changes, helping you drive more efficiently. Its straightforward design and easy installation mean you can upgrade your car without any hassle.

Questions and Answers

Question: Will this tachometer work with a diesel engine?

Answer: This gauge is designed for gasoline engines with 4, 6, or 8 cylinders. It may not work correctly with diesel engines due to different ignition systems.

Question: How do I set the shift light RPM?

Answer: The installation instruction included in the package will guide you on how to adjust the RPM threshold for the shift light.

Question: Does this gauge come with a wiring harness?

Answer: Yes, the package includes a set of fittings and an instruction manual to help with wiring.

Question: What is the diameter of the gauge?

Answer: The gauge has a diameter of 3.75 inches, which is approximately 95 mm.

Question: Can this tachometer be used in a 24V vehicle?

Answer: No, this gauge is designed to operate on a 12V electrical system only.

Get a smooth, glossy finish on your car's paint with this purple wool polishing pad. Made from 100% lambwool, it is designed for use with RO polishers, DA polishers, and electric polishers to apply wax and polish effectively.

This buffing pad is built for high-temperature resistance and efficient polishing. The dense wool fibers help you save wax while delivering a scratch-free shine. Available in multiple sizes, it fits standard backing plates for versatile use on different vehicle surfaces.

Whether you are a professional detailer or a DIY car enthusiast, this pad provides the right balance of cutting power and finish quality. The hook and loop backing holds firmly to your backing plate, so you can work with confidence.

Choose from 3, 4, 5, 6, or 7 inch diameters to match your polisher and the job at hand. Each pad is crafted to deliver consistent results, making your car detailing routine more efficient and effective.

Key Features and Benefits

- 100% lambwool material that provides excellent polishing performance and high temperature resistance for long-lasting use

• High quality hook and loop backing that fits the backing plate firmly without degumming for secure attachment during work

• Multiple size options from 3 to 7 inches that let you choose the right pad for different areas of your vehicle

• Polishing and scratching efficiency that saves wax and effort for a more economical detailing process

• Compatible with RO polisher, DA polisher, and electric polisher for flexible use with your existing tools

Who Is This For

- Car detailers who need a reliable wool pad for applying wax and polish to paint surfaces

• DIY car owners who want to achieve a professional-looking shine at home

• Auto body shop professionals who work with different polisher types and need versatile pad sizes

• Anyone looking to restore gloss and remove light swirl marks from vehicle paint

Usage Scenario

Mark had been trying to restore the faded paint on his sedan for weeks with hand-applied wax. After switching to a DA polisher with this purple lambwool pad, he finished the entire hood in under 15 minutes. The pad glided smoothly, and the wax spread evenly without splattering. He noticed the pad held up well even after polishing the whole car, with no signs of shedding or overheating.

Micro Comparison

While foam pads are great for final finishing, this lambwool pad offers more cutting action for initial polishing and wax application. The natural wool fibers generate less heat than some synthetic options, reducing the risk of paint damage. If you want a pad that balances cutting power with a smooth finish, this wool pad is a solid choice.

Specifications

- Material: 100% lambwool

• Color: Purple

• Diameter: 3/4/5/6/7 inch

• Thickness: around 30mm

• Function: For car wax and polishing

• Suitable for: 3/4/5/6/7 inch backing plate

• Compatible with: RO Polisher, DA Polisher, Electric Polisher

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x Purple Wool Polishing Pad

Why You Will Love It

You will love how this pad makes car polishing faster and more enjoyable. The natural lambwool delivers a deep shine without harsh chemicals. With multiple sizes to choose from, you can tackle everything from tight spots to large panels with one reliable tool.

Questions and Answers

Question: Can I use this wool pad with a rotary polisher?

Answer: Yes, this pad works with RO polishers, DA polishers, and electric rotary polishers.

Question: What size backing plate do I need for the 5 inch pad?

Answer: The 5 inch pad fits a 5 inch backing plate. Each pad size matches the same size backing plate.

Question: Is this pad safe for clear coat finishes?

Answer: Yes, the lambwool material is gentle enough for clear coats when used with proper technique and polish.

Question: How do I clean the pad after use?

Answer: Rinse the pad with water and mild soap, then let it air dry. Avoid using harsh chemicals that could damage the wool fibers.

Question: Will the hook and loop backing wear out quickly?

Answer: The high quality hook and loop is designed to hold firmly without degumming, giving you reliable attachment over many uses.

This car snow cover protects your windshield and hood from snow, frost, ice, and sun. The multi-layer design provides reliable all-season protection for your vehicle.

Winter mornings often mean scraping ice off your windshield or brushing away heavy snow. This car cover eliminates that chore. Made with a multi-layer construction, it blocks frost, snow, and UV rays while protecting your car's paint. The aluminized film reflects sunlight to keep your interior cooler in summer and prevents ice from bonding to glass in winter. Reflective strips add visibility at night for extra safety.

The cover is easy to install and fits most cars, SUVs, and commercial vehicles. You get a universal fit with mirror pockets and a secure fastening system that includes door windbreaks and wheel-side hooks. When not in use, it folds into a compact size for storage in your trunk.

Choose between a 3-layer option for basic protection or a 5-layer upgraded version with added flame-retardant cotton and insulation foam for maximum thickness and durability in harsh winter conditions.

Key Features and Benefits

- Multi-layer construction that provides snowproof, anti-frost, and UV protection for year-round use

• Aluminized film layers that reflect sunlight and heat, keeping your car cooler in summer and preventing ice buildup in winter

• Reflective strips that improve nighttime visibility, making your parked car easier to see in low light

• Universal fit with mirror pockets and secure fastening system that works on cars, SUVs, and commercial vehicles

• Lightweight and foldable design that stores easily in your trunk when not in use

Who Is This For

- Drivers in cold climates who want to avoid scraping ice and snow off their windshield each morning

• Car owners who park outdoors and need protection from sun, frost, tree sap, bird droppings, and dust

• Fleet managers or commercial vehicle operators looking for a cost-effective way to protect multiple vehicles

• Anyone who wants a simple, reusable cover that works across all four seasons without complex installation

Usage Scenario

Sarah lives in a snowy region and parks her sedan on the street. Every winter morning she used to spend ten minutes scraping frost and brushing snow off her windshield. Since using this car snow cover, she simply removes it in seconds and drives off with a clear view. The cover also protects her hood from scratches and keeps her interior from overheating on sunny winter days.

Micro Comparison

Basic car covers often use a single layer of thin material that can tear or let moisture through. This cover uses multiple layers including aluminum film and fleece for better insulation and durability. The 5-layer option adds flame-retardant cotton and foam for extra thickness, making it a better choice for areas with heavy snowfall or extreme cold.

Specifications

Material: Ultrasonic cotton fleece thickening (3-layer: Aluminum film, aluminum film fixing fleece, black lining) (5-layer: Aluminum film, aluminum film fixing fleece, flame-retardant cotton, composite insulation foam, black lining)

Color: Silver

Weight: 3-layer approximately 1.0 kg / 2.2 lb, 5-layer approximately 1.5 kg / 3.3 lb

Applicable models: Car, SUV, Commercial Vehicles

Package Includes

- 1 x Car snow cover

Why You Will Love It

No more scraping ice or brushing snow before your morning commute. This cover saves you time and keeps your car's paint and interior protected from harsh weather. It is a simple, reusable solution that works all year round.

Questions and Answers

Question: Will this cover fit my sedan?

Answer: Yes, it is designed for universal fit on cars, SUVs, and commercial vehicles. Check your vehicle dimensions against the cover size before ordering.

Question: Is the 3-layer option thick enough for heavy snow?

Answer: The 3-layer is thinner and better suited for light snow and frost. For heavy snow or extreme cold, we recommend the 5-layer upgraded version.

Question: Does the cover have mirror pockets?

Answer: Yes, it includes mirror pockets and a secure fastening system with door windbreaks and wheel-side hooks.

Question: Can I use this cover in summer?

Answer: Yes, the aluminized film reflects sunlight and heat, helping to keep your car's interior cooler and protecting the paint from UV damage.

Question: How do I clean the cover?

Answer: You can wipe it clean with a damp cloth or hose it down. Let it air dry before storing.

These ultra-soft microfiber towels are designed to handle everything from car detailing to kitchen cleaning. With strong water absorption and non-linting fibers, they make drying and dusting quick and easy.

Each towel is made from fine soft polyester fiber with a thickened design for durability. The material is gentle on surfaces, so it works well on paint, glass, and chrome without scratching. You can use them wet or dry for versatile cleaning around your home and garage.

The towels are reusable and easy to clean. Just toss them in the wash after use, and they are ready to go again. They do not shed or fade, which means they stay effective even after many cycles. Whether you are washing your car, wiping down counters, or drying dishes, these cloths deliver consistent performance.

Choose from packs of 3, 5, or 10 to match your needs. The compact 30x30 cm size is easy to handle and store, making them a practical addition to any cleaning kit.

Key Features and Benefits

- Ultra-soft microfiber material that lifts dirt and grime without scratching surfaces

• Strong water absorption that speeds up drying on cars, windows, and dishes

• Non-shedding and non-fading fibers that stay effective after repeated washing

• Thickened design that provides extra durability and better cleaning coverage

• Reusable and machine-washable for long-term use and less waste

Who Is This For

- Car owners who want a safe, scratch-free way to dry and polish their vehicle

• Home users looking for a multi-purpose cloth for kitchen, bathroom, and general cleaning

• Motorcycle and bike enthusiasts who need a gentle towel for detailing delicate parts

• Anyone who prefers reusable cleaning supplies over disposable paper towels

Usage Scenario

After a long weekend drive, your car is covered in dust and light grime. You grab one of these microfiber towels, wet it slightly, and wipe down the hood and windows. The cloth picks up every speck of dust without leaving lint behind. You dry the surface with the same towel, and it absorbs the moisture in one pass. No streaks, no scratches, just a clean finish. Later, you use another towel from the pack to wipe down the kitchen counter after dinner. It handles the spill and rinses clean in seconds.

Micro Comparison

Compared to standard cotton rags, these microfiber towels absorb more water and trap dust better without leaving lint. They are also softer on painted surfaces, which reduces the risk of swirl marks during car care. The non-fading material holds its color and performance wash after wash, giving you a longer useful life than basic cloths.

Specifications

- Material: Fine soft polyester fiber

• Size: 30 cm x 30 cm (11.8 in x 11.8 in)

• Function: Car cleaning, window cleaning, dish cleaning

• Package: 3, 5, or 10 pieces per pack

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 3 / 5 / 10 PCS Microfiber Towel (depending on selected pack)

Why You Will Love It

These towels make everyday cleaning faster and more effective. You get a scratch-free finish on your car and streak-free results around the house. The reusable design saves money and reduces waste, so you feel good about your choice every time you clean.

Questions and Answers

Question: Can I use these towels on my car paint without scratching it?

Answer: Yes, the ultra-soft microfiber material is safe for painted surfaces and will not cause scratches or swirl marks.

Question: How should I wash these towels?

Answer: Machine wash with mild detergent. Avoid using fabric softener as it can reduce absorbency. Tumble dry on low heat or air dry.

Question: Do these towels leave lint behind?

Answer: No, they are designed to be non-shedding and lint-free, even after multiple washes.

Question: What sizes are available in this pack?

Answer: Each towel measures 30 cm x 30 cm (about 11.8 in x 11.8 in). You can choose a pack of 3, 5, or 10 towels.

Question: Are these towels good for drying dishes?

Answer: Yes, they work well for drying dishes and glassware because they absorb water quickly and leave no streaks or lint.

Get a precise and reliable speed reading for your car, truck, or boat with this 52mm GPS speedometer. It uses a GPS antenna to measure your speed, so you get accurate data without needing a mechanical connection to your vehicle's transmission. The bright 7-color LED backlight lets you customize the look to match your dashboard or mood.

This speed gauge is built for easy installation and simple operation. Once powered on, it automatically searches for a GPS signal. The LCD screen clearly shows the signal search status. If the signal is not found after a few minutes, the display will show an error code, so you always know the unit's status.

The backlight is easy to control with a simple wire connection. A short touch of the blue wire to the power supply negative will cycle through seven different colors, including an automatic mode that changes the color every minute for a dynamic look. This makes it easy to match your vehicle's interior lighting or just enjoy a change of pace.

Built with a waterproof IP67 rating and a metal construction, this speedometer is designed to handle tough conditions. It works with a wide range of 9-32V power systems, making it suitable for 12V and 24V vehicles. Whether you are upgrading your off-road truck or adding a gauge to your marine dash, this unit is a durable and functional choice.

Key Features and Benefits

- GPS antenna for accurate speed measurement that provides a reliable reading without mechanical connections.

• 7-color LED backlight with automatic cycling mode lets you personalize your dashboard look.

• Waterproof IP67 rating protects the gauge from water and dust for long-lasting use in tough environments.

• Wide working voltage of 9-32V ensures compatibility with most 12V and 24V vehicle electrical systems.

• Metal construction offers a sturdy and durable build that can handle vibration and daily use.

• Simple blue wire control for backlight color change makes operation quick and intuitive.

Who Is This For

- Car and truck owners who want a modern GPS speedometer as a replacement or upgrade for their factory gauge.

• Marine and boat enthusiasts looking for a waterproof speed gauge for their dashboard.

• Off-road and 4x4 drivers who need a reliable speed reading in vehicles with modified tires or gearing.

• Anyone building or restoring a custom vehicle who wants a clean, functional, and easy-to-install speedometer.

Usage Scenario

Mark just finished upgrading the tires on his off-road truck. The larger tires threw off his factory speedometer, making it read slower than his actual speed. He installed this GPS speedometer in a spare 52mm dash slot. After turning the key, the gauge searched for satellites and locked onto a signal within a minute. Now he sees his true speed on the trail and highway. The blue backlight matches his other gauges perfectly.

Micro Comparison

Unlike traditional speedometers that rely on a cable or electronic signal from the transmission, this unit uses a GPS signal to determine speed. This means it is not affected by tire size changes, gear ratio swaps, or worn-out speedometer cables. It provides a direct, satellite-based reading that is accurate from the moment you start driving. The simple installation and customizable backlight make it a convenient and modern upgrade for any vehicle.

Specifications

- Material: Metal

• Item Weight: 0.36kg

• Backlight: 7 Color LED

• Waterproof: IP67

• Working Voltage: 9-32V

• Fitment: for Car, Marine, Boat 12V 24V

Package Includes

- 1 x GPS Speedometer

• 1 x GPS Antenna

• 1 x Wiring Harness

• 1 x Mounting Bracket

• 1 x User Manual

Why You Will Love It

You will appreciate the freedom of a speedometer that is not tied to your vehicle's mechanical parts. The accurate GPS signal and easy color customization give you both function and style. It is a simple, durable upgrade that makes your drive more informed and your dashboard look great.

Questions and Answers

Question: Does this speedometer work in tunnels or under heavy tree cover?

Answer: It requires a clear view of the sky to get a GPS signal. In deep tunnels or very heavy cover, the signal may be lost, and the gauge will show an error code until it reconnects.

Question: How do I change the backlight color?

Answer: Briefly touch the blue wire to the power supply negative (ground). Each touch will cycle through the colors in sequence: red, green, blue, white, yellow, cyan, purple, and then automatic mode.

Question: Can this gauge be used on a motorcycle?

Answer: Yes, it can be used on a motorcycle as long as you have a 9-32V power source and a place to mount the 52mm gauge. The GPS antenna needs a clear view of the sky.

Question: What does the "ER" display mean?

Answer: The "ER" display means the gauge was unable to find a GPS signal after about 3 minutes of searching. Check that the antenna has a clear view of the sky and that it is properly connected.

Question: Is the wiring harness included?

Answer: Yes, the package includes a wiring harness and a mounting bracket to help you install the speedometer.

Keep your car and home spotless without the hassle of cords or heavy equipment. This 30000PA wireless car vacuum cleaner delivers professional-grade suction in a lightweight, handheld design that fits right in your glove box.

Strong suction power makes a real difference when you are cleaning tight spaces. With 30,000 PA of suction, this cordless vacuum picks up dirt, crumbs, and debris from car seats, floor mats, and upholstery. The rechargeable battery lets you clean anywhere without being tethered to an outlet. Switch from your car to your sofa, keyboard, or shelves in seconds.

The washable filter keeps maintenance simple and extends the life of your vacuum. Attachments like the nozzle and brush help you reach into crevices and clean delicate surfaces without scratching. When you are done, the compact body stores easily in your door pocket or glove box. This is a practical tool for anyone who wants a quick clean without the bulk of a traditional vacuum.

Whether you are tidying up after a road trip or giving your home a quick refresh, this handheld vacuum makes the job fast and easy. It is designed for real life, where spills happen and messes need to disappear fast.

Key Features and Benefits

- 30,000 PA suction power that deep-cleans car seats, mats, and home surfaces thoroughly

• Fully wireless design with a rechargeable battery so you can clean anywhere without cords

• Handheld and portable form that fits in one hand for easy maneuvering in tight spaces

• Multi-surface use that works on cars, furniture, keyboards, and shelves for versatile cleaning

• Washable filter that is easy to clean and maintain for long-lasting performance

• Compact storage that fits in your glove box or door pocket for convenient access

Who Is This For

- Drivers who want to keep their car interior clean without going to a car wash

• Pet owners who need to quickly remove fur and debris from seats and mats

• Home users looking for a lightweight vacuum for upholstery, keyboards, and shelves

• Travelers and commuters who want a portable cleaning tool for on-the-go messes

Usage Scenario

After a weekend road trip, you find crumbs scattered across the back seat and floor mats. Instead of lugging out a full-size vacuum, you grab this cordless handheld unit from the glove box. Within minutes, the 30,000 PA suction clears every crumb and speck of dirt. You even use the brush attachment to dust off the dashboard and air vents. The whole car looks fresh again without any hassle.

Micro Comparison

Many handheld vacuums struggle with deep cleaning because their suction power is too low. This model delivers 30,000 PA, which is significantly stronger than most portable options. It also stays cordless, so you never have to hunt for an outlet or deal with a tangled cord. The result is a cleaning tool that actually works as hard as you do.

Specifications

- Suction Power: 30,000 PA

• Power Source: Rechargeable wireless

• Filter: Washable

• Design: Handheld cordless

• Use: Car and home

Package Includes

- 1 x Vacuum Cleaner Unit

• Nozzle and Brush Attachments

• Charging Cable

• User Manual

Why You Will Love It

You will love how easy it is to grab this vacuum and clean up messes in seconds. No cords, no setup, no heavy lifting. Just strong suction that makes your car and home feel fresh every time you use it.

Questions and Answers

Question: How long does the battery last on a full charge?

Answer: The battery life depends on usage, but it is designed for quick cleaning sessions around your car and home.

Question: Can I use this vacuum on wet spills?

Answer: This is a dry vacuum cleaner designed for picking up dry debris like crumbs, dirt, and dust. It is not intended for wet spills.

Question: How do I clean the washable filter?

Answer: Remove the filter from the unit and rinse it under running water. Let it dry completely before placing it back in the vacuum.

Question: Does this vacuum come with a wall charger?

Answer: Yes, the package includes a charging cable to recharge the battery.

Question: Is this vacuum loud during operation?

Answer: It operates at a moderate noise level typical for handheld vacuums, but it is not excessively loud.

This 85mm tachometer with sensor gives you a clear, real-time read of your engine's RPM and running hours. Designed for diesel and gasoline engines, it features a red backlit display that is easy to read in low light. The gauge is a practical upgrade for anyone who needs to monitor engine performance on a boat, truck, car, or generator.

The tachometer provides accurate readings up to 4000 RPM and includes a built-in hour meter to track engine run time. This helps you stay on top of maintenance schedules and monitor engine load. The included sensor makes installation straightforward, and the 85mm diameter fits standard gauge panels.

Built with a durable plastic shell, this gauge operates on a wide voltage range from 9 to 32V DC. It is a versatile tool for keeping your engine running smoothly and reliably. Whether you are upgrading an old gauge or adding one to a new setup, this tachometer delivers the information you need at a glance.

Key Features and Benefits

- 85mm diameter gauge that fits standard dashboard openings for a clean, professional look

• Red backlight that improves visibility in dark or dim engine rooms and cockpits

• Built-in hour meter that tracks total engine run time for easier maintenance planning

• Included sensor that simplifies the installation process and ensures accurate signal pickup

• Wide operating voltage range from 9 to 32V DC for use in 12V and 24V electrical systems

• High precision readings up to 4000 RPM for monitoring both idle and high-speed operation

Who Is This For

- Boat owners who want to monitor marine diesel or outboard engine RPM and hours

• Truck and van operators needing a reliable tachometer for diesel engine performance tracking

• Car enthusiasts upgrading their dashboard with a racing-style gauge that includes an hour meter

• Generator users who need to log engine run time for scheduled oil changes and servicing

Usage Scenario

Mark runs a small fishing charter and relies on his diesel boat engine day in and day out. He noticed the old tachometer was fading and no longer accurate. After installing this 85mm gauge with the included sensor, he could finally see exact RPM at cruising speed and track total engine hours. The red backlight makes it easy to read even at dusk when returning to the dock. He now schedules oil changes based on the hour meter, saving money and avoiding unexpected breakdowns.

Micro Comparison

Unlike basic tachometers that only show RPM, this gauge combines a tachometer and hour meter in one unit. The included sensor saves you the hassle of sourcing a separate pickup. Its wide voltage range makes it adaptable to both 12V and 24V systems, giving you more flexibility than single-voltage alternatives.

Specifications

- Diameter: 85 mm / 3.3 in

• Operating Voltage: 9~32V DC

• Indicating Range: 0~4000 RPM

• Material: Plastic Shell

• Backlight Color: Red

• Number Of Cylinders: 4

Package Includes

- 1x Tachometer

• 1x Sensor

Why You Will Love It

You get both RPM and hour tracking in one gauge, which simplifies your dashboard and your maintenance routine. The red backlight adds a sporty look while improving readability in low-light conditions. With the included sensor and clear display, you can install it with confidence and start monitoring your engine right away.

Questions and Answers

Question: Can this tachometer work on a 12V car battery?

Answer: Yes, it operates on 9 to 32V DC, so it works on both 12V and 24V systems.

Question: Does the gauge come with the sensor?

Answer: Yes, the package includes one tachometer and one sensor.

Question: What is the diameter of this gauge?

Answer: The diameter is 85 mm, which is about 3.3 inches.

Question: Can I use this on a 4-cylinder diesel engine?

Answer: Yes, it is designed to work with 4-cylinder engines.

Question: Is the backlight adjustable in brightness?

Answer: The backlight is red and fixed brightness. It is designed for clear visibility without adjustment.

Get professional-grade, thick foam for your car wash without the hassle. This 300ml foam lance generator easily attaches to your pressure washer, creating dense, fluffy snow foam that lifts dirt and grime for a safer, more effective clean.

This adjustable foam pot is built for convenience and performance. Its lightweight, portable design makes it easy to handle and store, while the 300ml capacity provides enough foam for a full vehicle wash. The integrated adjustment dial lets you control the foam density and output, giving you the perfect mix for every cleaning task.

Constructed with durable materials, including a resistant nylon body and a stainless steel mesh filter, this foam cannon is built to last. It is compatible with any standard 1/4 inch quick-connect pressure washer, making it a versatile addition to your detailing kit. Simply fill, connect, and spray for a fun and effective wash experience.

Whether you are a weekend warrior or a detailing enthusiast, this foam lance simplifies the washing process. It helps to reduce the risk of scratches by loosening dirt before you even touch the paint with a sponge. Enjoy a deeper clean and a satisfying foam show with every use.

Key Features and Benefits

- Adjustable foam dial that lets you control the thickness and output of the foam for different cleaning needs.

• Lightweight and portable design that makes the foam pot easy to carry and maneuver around your vehicle.

• Stainless steel mesh filter that prevents debris from clogging the nozzle, ensuring consistent performance.

• 300ml capacity bottle that holds enough solution to wash an entire car without constant refills.

• Compatible with 1/4 inch pressure washer interfaces, making it a universal fit for most machines.

Who Is This For

- Car owners who want a professional foam wash at home for a deeper, gentler clean.

• Detailing enthusiasts looking for an affordable and effective foam cannon for their pressure washer.

• Anyone who wants to add a layer of lubrication before hand washing to reduce the risk of swirl marks and scratches.

Usage Scenario

David spent his Sunday morning getting his SUV ready for a family road trip. Instead of using a bucket and sponge right away, he filled his new 300ml foam lance with car shampoo, attached it to his pressure washer, and covered the SUV in a thick layer of snow foam. He let it dwell for a few minutes to loosen the road grime and bug splatter. The foam rinsed off easily, and when he finally used the sponge, there was almost no dirt left to scrub. The wash was faster, safer, and more satisfying than ever.

Micro Comparison

Unlike basic spray nozzles that only rinse, this foam lance actively generates thick, clinging foam to pre-soak and loosen dirt. Many standard foamers lack adjustable settings, but this model gives you control over the foam's density. It is also built with a stainless steel filter and durable nylon body, offering better longevity than all-plastic alternatives.

Specifications

Capacity of bottle: 300ML

Suitable for: 1/4 INCH interface

Pressure Range: 160 bar (2350psi)

Construction Material: Resistant Nylon, PA bottle, Stainless Steel mesh filter

Size: 13.5 x 6.8 cm / 5.3 x 2.67 in

Package Includes

- 1 x Foam Pot

Why You Will Love It

You will love how easy it is to create a thick, professional-looking foam that makes washing your car more effective and fun. It saves you time by pre-soaking the dirt, so you spend less effort scrubbing. Plus, the adjustable dial puts you in control, letting you customize the wash for every job.

Questions and Answers

Question: Will this foam lance work with my electric pressure washer?

Answer: Yes, it works with most pressure washers that have a standard 1/4 inch quick-connect fitting.

Question: How do I adjust the foam thickness?

Answer: You can adjust the foam density by turning the dial on the top of the foam pot. Turn it one way for thicker foam and the other way for a lighter rinse.

Question: Can I use any car shampoo in this foam cannon?

Answer: Yes, you can use most liquid car wash soaps. For best results, use a soap specifically designed for foam cannons.

Question: Is the bottle easy to fill and clean?

Answer: Yes, the bottle has a wide opening for easy filling and rinsing. It is simple to disassemble for a thorough clean after use.

Question: What is the maximum pressure this foam pot can handle?

Answer: It is rated for a maximum pressure of 160 bar (2350 psi), which covers most residential and light commercial pressure washers.

Turn your pressure washer into a professional-grade foam cannon with this 300ml foam lance generator. It creates thick, dense foam that clings to surfaces for a deeper clean. Designed for easy use, this portable foam pot connects to any standard 1/4 inch pressure washer interface.

This foam cannon is built to handle high pressure up to 160 bar (2350 psi). The adjustable nozzle lets you control the foam output, from a light mist to a heavy snow-like foam. The bottle is made from durable PA material with a stainless steel mesh filter for reliable performance.

Simply fill the 300ml bottle with your favorite car shampoo and water, attach it to your pressure washer, and start cleaning. The lightweight design makes it easy to carry and store. Whether you are washing a car, truck, motorcycle, or patio furniture, this foam gun delivers consistent results every time.

Enjoy a fun and satisfying car washing experience. The foam lance creates soft, fluffy snow foam that lifts dirt and grime without scratching your paint. It is a simple upgrade that makes washing faster and more effective.

Key Features and Benefits

- Adjustable foam output that lets you control the thickness and coverage for different cleaning tasks

• 300ml capacity bottle that holds enough solution for a full car wash without frequent refills

• High-pressure rated up to 160 bar (2350 psi) that works with most residential pressure washers

• Durable construction using resistant nylon and PA bottle with stainless steel mesh filter that lasts longer

• Lightweight and portable design that makes it easy to carry, store, and move around your work area

• Universal 1/4 inch quick-connect fitting that attaches to most pressure washer guns without adapters

Who Is This For

- Home car owners who want professional-looking foam coverage without going to a car wash

• Detailers looking for a portable foam cannon for mobile detailing jobs

• DIY enthusiasts who enjoy washing their vehicles and want better cleaning results

• Anyone with a pressure washer who wants to upgrade from a standard spray nozzle

Usage Scenario

Mark used to spend 30 minutes scrubbing his SUV with a bucket and sponge. After switching to this foam lance, he sprays a thick layer of snow foam over the entire car in under two minutes. The foam lifts dirt and bugs, so he only needs a quick rinse and a gentle wipe. His car looks showroom clean with half the effort.

Micro Comparison

Unlike basic spray nozzles that apply a thin stream of soap, this foam cannon creates a thick blanket of foam that clings to vertical surfaces. This gives the soap more time to break down dirt. Compared to larger foam cannons, the 300ml size is more portable and easier to handle, yet still holds enough for a full car wash.

Specifications

- Capacity: 300ml

• Suitable for: 1/4 inch interface

• Pressure Range: 160 bar (2350 psi)

• Construction Material: Resistant Nylon, PA bottle, Stainless Steel mesh filter

• Size: 16.5 x 7 cm / 6.5 x 2.75 in

Package Includes

- 1 x Foam Pot

Why You Will Love It

You will love how easy it is to create professional-grade foam at home. The adjustable nozzle gives you full control, so you can switch from a heavy foam wash to a light rinse. It is a small tool that makes a big difference in your car care routine.

Questions and Answers

Question: Will this foam cannon work with my gas pressure washer?

Answer: Yes, it works with most gas and electric pressure washers that have a 1/4 inch quick-connect fitting.

Question: How do I adjust the foam thickness?

Answer: Turn the black knob on top of the foam lance to adjust the foam output from light to heavy.

Question: Can I use this for cleaning other things like patio furniture?

Answer: Yes, you can use it for cars, trucks, motorcycles, boats, patio furniture, and outdoor equipment.

Question: Does the bottle come with a measuring line?

Answer: The bottle is clear and has markings so you can easily mix your soap and water.

Question: Is the foam lance easy to clean after use?

Answer: Yes, just rinse it with clean water after each use to prevent soap residue buildup.

Charge your phone while driving without plugging in a cable. This 30W fast wireless car charger uses strong magnets to hold your phone securely while delivering power. It works with iPhone 12 to 17 series and many Android phones, making it a versatile choice for any driver.

Say goodbye to tangled cables and dropped phones. The magnetic mount keeps your device firmly in place, even on bumpy roads. Just place your phone on the charger and it snaps into position and starts charging automatically. You can mount and unmount your phone with one hand, which makes it easy to grab your device when you arrive at your destination.

This charger fits most car air vents with its updated ventilation clip. The 360-degree rotating ball joint lets you adjust the viewing angle to portrait or landscape. Whether you need navigation, music controls, or hands-free calls, you can position your phone exactly where you want it.

The charger supports multiple power levels from 5W up to 30W. For the fastest charging speeds, use a QC3.0 car charger with the included Type C cable. If your phone does not have built-in magnetic support, a magnetic ring is included so you can still use the magnetic feature.

Key Features and Benefits

- Strong magnetic hold that keeps your phone fixed to the charging plate without sliding

• 30W maximum power output for faster wireless charging than standard chargers

• Single-hand magnetic mounting so you can grab your phone and go without delay

• 360-degree rotating ball joint for easy adjustment between portrait and landscape views

• Updated ventilation clip that securely attaches to your car air vent

• Includes a magnetic ring for phones that do not have built-in magnetic support

Who Is This For

- iPhone users with iPhone 12 through 17 series who want fast magnetic charging in the car

• Android users who want wireless charging and are willing to use a magnetic ring or case

• Drivers who need one-handed access to their phone for navigation, music, or calls

• Anyone tired of dealing with charging cables that get in the way while driving

Usage Scenario

Sarah drives for work every day and relies on her phone for GPS navigation. Before, she would plug in a cable every time she got in the car, and the cable would get tangled around her gear shift. Now she just places her iPhone on the magnetic charger and it locks into place and starts charging. She can see her map clearly, adjust the angle with one hand, and grab her phone quickly when she parks. No more cable frustration.

Micro Comparison

Unlike traditional car phone holders that require you to squeeze your phone into a clamp or use sticky pads, this magnetic charger holds your phone with strong magnets and charges it at the same time. It gives you both a secure mount and wireless charging in one device, so you do not need separate accessories.

Specifications

Type: Magnetic Wireless Car Charger

Power: 30W / 20W / 15W / 10W / 7.5W / 5W

Input Interface: Type C

Input: DC 12V / 1.75A, 9V / 1.67A, 5V / 2A

Material: Plastic

Package Includes

1x Wireless Car Charger

1x Air Vent Holder

1x 1m Type C Charging Cable (included only if selected)

1x Magnetic Ring (for phones without built-in magnetic support)

Why You Will Love It

You will love how easy it is to mount and charge your phone without fumbling with cables. The magnetic connection feels solid and reliable, and the fast charging keeps your battery topped up during short trips. It is a simple upgrade that makes every drive more convenient.

Questions and Answers

Question: Does this charger work with iPhone 14 and iPhone 15?

Answer: Yes, it works with iPhone 12, 13, 14, 15, 16, and 17 series phones.

Question: Can I use this with a Samsung phone?

Answer: Yes, but Samsung phones do not have built-in magnets. You will need to attach the included magnetic ring or use a magnetic case.

Question: How fast does it charge?

Answer: The charger supports up to 30W. For the fastest speed, use a QC3.0 car charger. It also supports 20W, 15W, 10W, 7.5W, and 5W depending on your phone.

Question: Does it come with a car charger plug?

Answer: No, it comes with a Type C cable and an air vent holder. You need to use your own QC3.0 car charger plug for fast charging.

Question: Will the magnet hold my phone on bumpy roads?

Answer: Yes, the magnet is strong enough to keep your phone in place during normal driving conditions, including bumps and turns.

Question: Can I adjust the angle of the phone?

Answer: Yes, the charger has a 360-degree rotating ball joint so you can switch between portrait and landscape views easily.

Question: Does this work with a thick phone case?

Answer: It works best with slim cases or magnetic cases. If your case is thick or does not hold the magnet well, use the included magnetic ring on the back of your phone or case.

Monitor your engine's coolant temperature with this 310-22ohm water temp sensor. Designed for 12V and 24V systems, it works with most cars, motorcycles, and racing vehicles. The 1/8 NPT thread size and 10mm sensor fit common gauge setups for accurate temperature readings.

This temperature sensor helps you keep an eye on engine heat during daily driving or track sessions. Built with a metal body and plastic shell, it handles vibration and bumps without losing performance. The signal range of 310 to 22 ohms gives your gauge the data it needs to show real-time coolant temperature.

Installation is straightforward with the standard 1/8 NPT thread. Just screw it into the correct port on your engine block or intake manifold, connect the wire to your temperature gauge, and you are ready to go. It works as a direct replacement for many factory and aftermarket water temp sensors.

Whether you are building a custom dash or replacing a faulty sensor, this component delivers reliable readings. It supports both 12V and 24V electrical systems, making it versatile for cars, trucks, motorcycles, and race vehicles.

Key Features and Benefits

- 310-22ohm signal range that provides accurate temperature data to your gauge for precise engine monitoring

• 1/8 NPT thread size that fits common sensor ports for easy installation without adapters

• Works with 12V and 24V systems so it suits cars, trucks, and motorcycles

• Metal construction with plastic shell that resists vibration and impact for long-lasting use

• Universal compatibility that replaces many factory and aftermarket water temperature sensors

Who Is This For

- Car enthusiasts upgrading or replacing their coolant temperature sensor

• Motorcycle owners installing an aftermarket temperature gauge

• Racers and track day drivers monitoring engine heat during high-performance driving

• DIY mechanics performing routine maintenance or custom gauge installations

Usage Scenario

Mark noticed his daily driver's temperature gauge stopped working. Without accurate coolant readings, he worried about overheating during his commute. He ordered this 310-22ohm water temp sensor, installed it in the engine's sensor port in under 10 minutes, and connected it to his existing gauge. Now he sees real-time temperature data again and drives with confidence.

Micro Comparison

Unlike universal sensors that require adapters or modification, this unit uses a standard 1/8 NPT thread that fits directly into most engine ports. The 310-22ohm signal range matches many aftermarket gauges, so you do not need to recalibrate your display. It is a drop-in replacement that saves time and hassle compared to generic sensors with unknown specifications.

Specifications

- Material: Metal with plastic shell

• Thread Size: 1/8 NPT

• Sensor Size: 10mm

• Working Voltage: 12V-24V

• Signal: 310-22ohm

• Item Weight: 30g

Package Includes

- 1 x Temperature Sensor

Why You Will Love It

You get a reliable temperature sensor that fits standard ports and works with both 12V and 24V systems. It is built tough to handle engine bay conditions and gives your gauge accurate data so you can drive without worry. Simple installation means you spend less time fixing and more time driving.

Questions and Answers

Question: What thread size does this sensor use?

Answer: It uses a 1/8 NPT thread, which is a common size for engine temperature sensor ports.

Question: Will this sensor work with a 12V system?

Answer: Yes, it works with both 12V and 24V electrical systems.

Question: What is the signal range of this sensor?

Answer: The signal range is 310 to 22 ohms, which matches many aftermarket temperature gauges.

Question: Can I use this on a motorcycle?

Answer: Yes, it works on cars, motorcycles, and racing vehicles that use a 1/8 NPT sensor port.

Question: Is this sensor easy to install?

Answer: Yes, just screw it into the correct port and connect the wire to your temperature gauge.

Question: Does this sensor come with a gauge?

Answer: No, it is just the sensor. You need a compatible temperature gauge to display the readings.

Keep your Ford's tire pressure monitoring system working reliably with this set of four 315MHZ TPMS sensors. Designed to fit a wide range of Ford models including Edge, Escape, Fiesta, Fusion, and Mustang, these sensors come pre-programmed for a straightforward installation process. They help you maintain proper tire pressure, which can improve fuel efficiency and extend tire life.

Each sensor is built with a PCBA board and battery, ensuring accurate pressure readings and consistent performance. The package includes four sensors, making it a complete replacement set for your vehicle. These sensors are a direct replacement for several OEM part numbers, including DE8T-1A180-AA, 9L3T-1A180-AF, and 9L3Z-1A189-A.

Installation is simplified with the use of an EL-50449 scan tool for activation. No sensor programming is required as they come pre-configured for your specific Ford make, model, and year. For best results, we recommend having a trained professional handle the installation.

Key Features and Benefits

- 315MHZ frequency that provides reliable tire pressure data to your vehicle's monitoring system

• Pre-programmed for direct fitment to save you time and reduce installation complexity

• Compatible with multiple Ford models to offer a versatile replacement solution for various vehicles

• Includes four sensors in one package to provide a complete set for all four tires

• Made with a PCBA board and battery for durable and accurate performance

Who Is This For

- Ford owners with vehicles manufactured between 2007 and 2020 who need to replace faulty or dead TPMS sensors

• DIY car enthusiasts who prefer to handle their own tire pressure sensor replacements at home

• Mechanics and auto shops looking for a reliable, pre-programmed TPMS sensor set for Ford service jobs

• Drivers who want to maintain optimal tire pressure for better fuel economy and safer driving conditions

Usage Scenario

Mark noticed his Ford Fusion's tire pressure warning light stayed on even after checking and inflating his tires. After a quick scan at his local auto parts store, he learned one of his TPMS sensors had failed. He ordered this four-pack, had them installed by a trusted mechanic, and used his EL-50449 tool to activate them. The warning light turned off immediately, and he felt more confident driving knowing his tire pressures were being monitored correctly again.

Micro Comparison

Many generic TPMS sensors require complex programming that can only be done with expensive dealer-level tools. This set comes pre-programmed for your specific Ford model, so you only need an EL-50449 scan tool for activation. It saves you a trip to the dealership and keeps the replacement process simple and affordable.

Specifications

Product Frequency: 315MHZ

Material: PCBA board and battery

OEM Part Numbers: DE8T-1A180-AA, 9L3T-1A180-AF, 9L3Z-1A189A, 9L3Z-1A189-A, CM5T-1A180-AA, ZZDA37140

Matching Tool: EL-50449

Applicable Vehicle Types

• For Ford Edge (from 2011-01 to 2015-05)

• For Ford Escape (from 2007-02 to 2012-09)

• For Ford Fiesta (from 2018-01 to 2020-07)

• For Ford Fusion (from 2010-01 to 2012-12)

• For Ford Fusion (from 2012-09 to 2013-12)

• For Ford Mustang (from 2010-01 to 2012-12)

• For Ford Mustang (from 2013-01 to 2015-02)

Package Includes

- 4 x TPMS Tire Pressure Sensors

Why You Will Love It

You get a complete set of four pre-programmed sensors that fit multiple Ford models, so you do not have to search for individual replacements. The straightforward activation process with an EL-50449 tool means you can get back on the road quickly. Reliable tire pressure monitoring gives you peace of mind and helps protect your tire investment.

Questions and Answers

Question: Do these sensors come pre-programmed for my Ford vehicle?

Answer: Yes, these sensors are 100% new and come pre-programmed specifically for your Ford make, model, and year. You only need an EL-50449 scan tool to activate them after installation.

Question: What is the frequency of these TPMS sensors?

Answer: These sensors operate at 315MHZ, which is the standard frequency for many Ford vehicles.

Question: Can I install these sensors myself?

Answer: Installation is recommended to be performed only by trained professionals. However, if you have experience with tire work, you can install them and then use an EL-50449 tool for activation.

Question: How do I know if these sensors fit my specific Ford model?

Answer: Please confirm your vehicle's part number before purchasing. These sensors are compatible with Ford Edge, Escape, Fiesta, Fusion, and Mustang within specific model years listed in the product description.

Question: What should I do if the sensors do not work after installation?

Answer: First, make sure you have used an EL-50449 scan tool to activate them. If the issue continues, contact us before returning the product. Please ensure you have ordered the correct part number for your vehicle.