Replace your broken or missing sun visor clip with this OEM-style hook holder designed for a wide range of Volkswagen and Audi models. This small plastic clip secures the sun visor firmly in place, preventing it from sagging or swinging while you drive. Choose between black or grey to match your car's interior trim.

This clip is a direct replacement for factory part numbers 5G0857561B and 5G0857561A. It fits multiple VW models including the Golf 7 MK7 from 2013, Passat B8 from 2015, Polo from 2018, T-Cross from 2019, Tiguan from 2016, and Touran from 2016. It also works with the Audi Q8 and RSQ8 from 2019 and 2020, as well as the Seat Tarraco from 2019. Each package includes two clips, so you can replace both sides at once.

Made from durable plastic, this clip is lightweight at just 2 grams per piece. Installation takes only a few seconds with no tools required. Simply snap the old clip out and press the new one into place. It holds the sun visor securely without rattling or loosening over time.

Key Features and Benefits

- OEM replacement part number 5G0857561B/5G0857561A that ensures a perfect fit for your specific VW or Audi model

• Lightweight plastic construction at 2g per piece that adds no extra weight to your sun visor assembly

• Two clips per pack that let you replace both driver and passenger side clips at the same time

• Tool-free snap-in installation that takes less than a minute to complete

• Available in black or grey that matches your factory interior trim color

Who Is This For

- VW Golf 7 MK7 owners from 2013 and later who need a quick sun visor clip replacement

• Passat B8, Polo, T-Cross, Tiguan, Touran, and other compatible VW model owners

• Audi Q8 and RSQ8 drivers looking for an affordable OEM-style clip replacement

• Anyone with a broken or missing sun visor clip who wants a simple no-tools fix

Usage Scenario

Mark noticed his sun visor on his 2017 VW Golf kept dropping down every time he hit a bump. The plastic clip had cracked after years of use. He ordered this two-pack, snapped the old clip out, and pressed the new one in. Now the visor stays firmly in place, and he replaced the passenger side clip too as a preventive measure. The whole job took less than five minutes.

Micro Comparison

Some universal clips claim to fit multiple brands but often loosen over time or require modification. This clip is designed specifically for VW and Audi models using the factory OEM number 5G0857561B. It snaps in without any adjustments and holds the visor securely just like the original part. The two-pack also saves you from ordering a second one later.

Specifications

Material: Plastics

OEM: 5G0857561B/5G0857561A

Weight (1 piece): 2g

Package Includes

- 2 x Sun Visor Clip Hook Holder

Why You Will Love It

This clip solves a small but annoying problem with a simple drop-in fix. You get two clips for the price of one, so both sides of your car are covered. It restores the factory feel of your sun visor without any hassle or special tools.

Questions and Answers

Question: Will this clip fit my 2019 VW Tiguan?

Answer: Yes, this clip fits the VW Tiguan from 2016 and later, including the 2019 model.

Question: Is this clip the same as the original factory part?

Answer: Yes, it is an OEM replacement with part number 5G0857561B, matching the original factory design.

Question: Do I need any tools to install this clip?

Answer: No tools are required. You can snap the old clip out and press the new one in by hand.

Question: Does this clip work for the passenger side sun visor too?

Answer: Yes, the clip works for both driver and passenger side sun visors. The pack includes two clips.

Question: What color options are available?

Answer: This clip is available in black or grey to match your interior trim.

SPECIFICATIONS

Brand Name: NONE

Country/Region of Manufacture: -

High-concerned chemical: none

Interchange Part Number: -

Item Height: -

Item Length: -

Item Weight: --

Item Width: -

Manufacturer Part Number: -

Material: -

OEM NO.: -

Origin: Mainland China

Other Part Number: --

Placement on Vehicle: -

Special Features: -

SPECIFICATIONS

Brand Name: NONE

Country/Region of Manufacture: china

High-concerned chemical: none

Interchange Part Number: peugeot

Item Height: 0

Item Length: 0

Item Weight: 1.85

Item Width: 0

Manufacturer Part Number: china

Material: abs

Origin: Mainland China

Other Part Number: peugeot

Placement on Vehicle: front

Special Features: peugeot

SPECIFICATIONS

Brand Name: RAVEX

Choice: yes

High-concerned chemical: none

Material: Synthetic Fiber

OEM NO.: 83280TA5A51ZA

Origin: Mainland China

Product Model: For Honda Accord

Product Model Year: 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017

Product Name 1: Sun Visor

Product Name 2: Sunvisor

Product Name 3: Sunshade Board

Product Name 4: Interior Sunshield

Product Name 5: Replacement Part

Product Name 6: Car Sun Visor

Product Name 7: Car Sunvisor

SPECIFICATIONS

Brand Name: Carzenith

Choice: yes

Compatible with 1: For Toyota Corolla Spacio Sedan E120 2001 2002 2003 2004 2005 2006 2007

Compatible with 2: For Toyota Corolla Axio E140 ZRE142/NZE141/NZE144 4 Door Sedan JDM Japan Domestic 2007 2008 2009 2010 2011 2012 2013,For Toyota Corolla Fielder E140 ZRE142/NZE141 Station Wagon Estate JDM 2007 2008 2009 2010 2011 2012 2013,For Toyota Corolla Sedan US Market ZRE142 North America Version 2008 2009 2010 2011 2012 2013

Compatible with 3: For Toyota Corolla Sedan Auris Hatchback E180 Hybrid 2013 2014 2015 2016 2017 2018 2019

Country/Region of Manufacture: China

High-concerned chemical: none

Material: UV Resistant Wear-proof Fabric + Reinforced Metal Hinge Bracket

OEM For 05.2001-06.2007 Left Driver's Side: 7432013200A0,7432013200B0

OEM For 05.2001-06.2007 Right Passenger Side: 7431013320A0,7431013320B0

OEM For 12.2007-08.2013 Left Driver's Side: 7432012E00B0,7432012B70B1,7432012E00E0,7432012B70E1

OEM For 12.2007-08.2013 Right Passenger Side: 7431012C10B1,7431012C10E1

Origin: Mainland China

Placement on Vehicle: Left Driver Side / Right Passenger Side

Product Name: Sun Visor/Sunvisor/Parasol/Pare Soleil/Tapa Sol

semi_Choice: yes

SPECIFICATIONS

Brand Name: NONE

High-concerned chemical: none

Origin: Mainland China

SPECIFICATIONS

Brand Name: NONE

Certification: NONE

Choice: yes

External Testing Certification: NONE

High-concerned chemical: none

Item Type: Mirror & Covers

Origin: Mainland China

semi_Choice: yes

SPECIFICATIONS

Brand Name: NONE

Choice: yes

High-concerned chemical: none

Origin: Mainland China

SPECIFICATIONS

Brand Name: NIGHTKIST

Choice: yes

High-concerned chemical: none

Origin: Mainland China

SPECIFICATIONS

Brand Name: NONE

High-concerned chemical: none

Origin: Mainland China

SPECIFICATIONS

Brand Name: OUKACHI

High-concerned chemical: none

OEM NO.: 2068106902.2068107002

Origin: Mainland China

SPECIFICATIONS

Brand Name: NIGHTKIST

Choice: yes

High-concerned chemical: none

Origin: Mainland China

SPECIFICATIONS

Brand Name: NONE

Choice: yes

High-concerned chemical: none

Origin: Mainland China

semi_Choice: yes

SPECIFICATIONS

Brand Name: NONE

Choice: yes

High-concerned chemical: none

Item Height: 1cm

Item Length: 18.6cm

Item Width: 7.2cm

OEM NO.: 20925242

Origin: Mainland China

SPECIFICATIONS

Brand Name: NONE

Choice: yes

High-concerned chemical: none

Item Height: 1cm

Item Length: 18.6cm

Item Width: 7.2cm

OEM NO.: 20925242,13293392,22800043,20925242,20925242

Origin: Mainland China

semi_Choice: yes

SPECIFICATIONS

Brand Name: NONE

Choice: yes

High-concerned chemical: none

Item Height: 1cm

Item Length: 18.6cm

Item Width: 7.2cm

OEM NO.: 20925242

Origin: Mainland China

SPECIFICATIONS

Brand Name: NONE

Country/Region of Manufacture: China

High-concerned chemical: none

Interchange Part Number: for Hyundai Sonata 8th generation 2011-2015

Item Weight: 0.5kg

OEM NO.: for Hyundai Sonata 8th generation 2011-2015

Origin: Mainland China

Special Features: Sun visor

Sun visor suitable for Hyundai Sonata 8th generation 2011-2015 car interior sun visor with makeup mirror

SPECIFICATIONS

Brand Name: NONE

High-concerned chemical: none

Material: ABS

OEM NO.: LR075958-1,LR075957-1,LR075956-1,LR063681-1

Origin: Mainland China

SPECIFICATIONS

Brand Name: NONE

High-concerned chemical: none

Item Height: 8

Item Length: 18

Item Weight: 0.3

Item Width: 12

Material: ABS

Origin: Mainland China

Stay cool and comfortable inside your Tesla Model 3, whether you have the original model or the latest Highland Refresh. This double-layer aluminum foil sunshade is designed to block heat and UV rays, making your drives more pleasant even on the sunniest days. It folds easily for storage when you need the sky view back.

This glass roof shade uses a reflective aluminum foil layer to bounce away solar heat, helping to reduce the temperature inside your car. The double-layer construction adds durability and improves insulation, so your air conditioning works more efficiently. It is a simple, non-electric solution to combat cabin heat without draining your battery.

Installation is straightforward and requires no tools. The sunshade fits snugly against the glass roof, staying in place as you drive. When you want to enjoy the open sky, just fold it up and store it in your trunk or under the seat. It is a practical upgrade for anyone who parks in direct sunlight or lives in a warm climate.

This cover is specifically tailored for Tesla Model 3 Old Version and Highland Refresh models. It covers the large panoramic glass roof, providing consistent protection from the sun's glare and heat. Keep your interior cooler, protect your seats from UV damage, and enjoy a more comfortable ride every day.

Key Features and Benefits

- Double-layer aluminum foil construction that reflects solar heat and reduces cabin temperature

• UV protective surface that helps shield your interior from sun damage and fading

• Foldable design that collapses for easy storage when not in use

• Custom fit for Tesla Model 3 Old Version and Highland Refresh for a snug, secure placement

• Non-electric and simple to install with no tools or modifications required

Who Is This For

- Tesla Model 3 owners looking to reduce heat buildup inside their car during summer

• Drivers who park outdoors frequently and want to protect their seats and dashboard from UV rays

• Highland Refresh owners who need a sunshade that fits the updated roof design

• Anyone who wants a foldable, storable shade that can be removed quickly when desired

Usage Scenario

Emma lives in Arizona where summer temperatures can hit 110°F. After parking her Model 3 at work for eight hours, the cabin used to feel like an oven. She installed this double-layer aluminum foil sunshade and noticed the difference immediately. The steering wheel and seats were no longer scorching hot, and her air conditioner cooled the car in half the time. Now she keeps the shade in place during the day and folds it into her trunk on cooler evenings.

Micro Comparison

Unlike mesh or single-layer shades that let heat pass through, this double-layer aluminum foil design reflects more solar energy away from the glass. It is also fully foldable, so you can store it easily when you want an open roof. The custom fit for both Model 3 versions means no gaps or sagging, giving you reliable coverage day after day.

Specifications

Material: 100% Polyester with aluminum foil coating

Thickness: STANDARD

Water Resistance Level: Not waterproof

Electrical: No

Package Includes

- 1 x Sunroof Sunshade

Why You Will Love It

You will love how this simple accessory transforms your driving experience on hot days. It keeps the cabin cooler, protects your interior from UV damage, and folds away in seconds when you want to see the sky. It is a low-cost, high-impact upgrade that makes your Tesla more comfortable year-round.

Questions and Answers

Question: Does this sunshade fit the Tesla Model 3 Highland Refresh?

Answer: Yes, it is designed for both the Old Version and the Highland Refresh Model 3.

Question: Is the sunshade easy to install?

Answer: Yes, it requires no tools or adhesive. You simply place it against the glass roof.

Question: Can I leave the sunshade in place while driving?

Answer: Yes, it fits snugly and stays secure while you drive.

Question: Does this sunshade block all sunlight?

Answer: It blocks a significant amount of heat and UV rays, but it is not completely opaque.

Question: How do I store the sunshade when not in use?

Answer: It folds flat for easy storage in your trunk or under a seat.

Get a secure and flexible way to use your phone while driving. This super strong car phone holder uses a powerful vacuum suction cup and a built-in magnet to keep your device firmly in place, even on rough roads. Its 360-degree rotation lets you find the perfect viewing angle for navigation, calls, or music without any hassle.

This mount is built for drivers who need a reliable hands-free solution. The strong magnetic grip works with most smartphones 4.7 inches and larger, making it easy to attach and remove your phone with one hand. The foldable design and dual-sided suction cup allow you to mount it on your dashboard or windshield for a clean, clutter-free setup.

Made from durable aluminum alloy and ABS materials, this phone holder is built to last. It includes protective silicone pads that prevent scratches and keep your phone from slipping. Whether you are commuting to work or taking a long road trip, this mount provides the stability and convenience you need to stay focused on the road.

Key Features and Benefits

- 16 powerful magnets that hold your phone securely even on bumpy roads, so you never have to worry about it falling off.

• Dual-sided vacuum suction cup that attaches firmly to dashboards and windshields, giving you flexible mounting options.

• Full 360-degree rotation that lets you switch between portrait and landscape views, making navigation and media control easy.

• Foldable and compact design that stores away neatly when not in use, saving space in your car.

• Aluminum alloy and ABS construction with anti-scratch silicone pads that protect your phone and provide a non-slip grip.

Who Is This For

- Daily commuters who rely on GPS navigation and want a stable phone mount.

• Rideshare drivers who need quick and easy phone access for maps and passenger communication.

• Anyone who uses their phone for hands-free calls or music while driving.

• Drivers with larger smartphones who need a mount that can securely hold a bigger device.

Usage Scenario

Mark was driving to a new client meeting when his GPS kept dropping the signal because his phone kept sliding off the dashboard. He pulled over and attached this magnetic car mount to his windshield. With one hand, he placed his phone on the holder and adjusted the angle to landscape mode. The strong magnet held it steady through sharp turns and bumpy roads, and he arrived on time without any distractions.

Micro Comparison

Unlike clamp-style holders that require two hands to operate and can block side buttons, this magnetic mount lets you attach and remove your phone instantly with one hand. The vacuum suction cup also offers a stronger and more reliable grip than adhesive pads that lose stickiness over time, making it a more durable choice for daily use.

Specifications

Material: Aluminum alloy, ABS

Color: Black/White

Size: 6.5 x 5 cm / 2.56 x 1.97 inches

Style: Regular

Applicable models: 4.7-inch or above smartphones

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x Car Phone Holder

Why You Will Love It

You will love how this mount makes driving safer and more convenient. It gives you a stable place for your phone without blocking your view or taking up too much space. The strong magnetic hold and easy one-hand operation mean you can focus on the road, not on your phone.

Questions and Answers

Question: Will this mount work with a phone that has a thick case?

Answer: It works best with phones that have a smooth back or a metal plate attached. Thick or rubber cases may reduce the magnetic hold.

Question: Can I attach this to a textured dashboard?

Answer: The suction cup works best on smooth, flat surfaces like glass or polished plastic. Textured dashboards may not provide a strong seal.

Question: Does the suction cup leave any residue when removed?

Answer: No, the suction cup does not leave sticky residue. It can be removed and repositioned easily.

Question: Is the mount easy to install?

Answer: Yes, installation is simple. Just clean the surface, press the suction cup firmly, and lock the lever into place.

Question: Does this holder block the phone's charging port?

Answer: No, the magnetic design leaves all ports and buttons accessible, so you can charge your phone while it is mounted.

Get extra cargo space on your next adventure with these durable roof rack cross bars. Designed for SUVs and off-road vehicles with existing longitudinal bars, this luggage carrier system lets you safely transport a roof box, camping gear, or extra luggage. With a strong load capacity and built-in lockable feet, it offers a secure and practical solution for road trips and outdoor excursions.

These cross bars are built to handle the demands of travel. The 120 cm length provides a wide and stable platform for attaching various roof accessories, making it easy to pack everything you need for a weekend getaway or a long journey. The universal fit design means they work with a wide range of vehicles that already have side rails, saving you the hassle of complicated installation.

Safety and security are top priorities. Each foot comes with a lock, so you can rest assured your rack and cargo are protected when you leave your vehicle. The robust construction supports up to 70 kg, giving you plenty of capacity for luggage, sports equipment, or camping supplies. This system is an ideal upgrade for anyone looking to maximize their vehicle's storage potential without compromising on stability.

Whether you are planning a cross-country road trip or a weekend camping trip, these roof rack cross bars provide the reliable foundation you need. They transform your SUV into a versatile hauler, ready for any adventure. Enjoy the freedom of bringing more gear along, knowing your load is secure and your rack is built to last.

Key Features and Benefits

- 120 cm length that provides a wide and stable platform for roof boxes and luggage.

• Universal fit that works with most vehicles equipped with longitudinal bars for easy installation.

• Lockable feet that offer security and peace of mind when your vehicle is parked.

• 70 kg load capacity that allows you to carry heavy items like camping gear and extra luggage.

• Durable construction that is built to withstand the demands of off-road and highway travel.

Who Is This For

- SUV and off-road vehicle owners who need extra cargo space for trips.

• Outdoor enthusiasts who regularly transport camping, hiking, or skiing equipment.

• Travelers looking for a secure and stable way to carry a roof box or luggage carrier.

Usage Scenario

Mark was planning a week-long camping trip in the mountains with his family. His SUV was packed to the brim with tents, sleeping bags, and coolers, leaving no room for the kayak he wanted to bring. He installed these roof rack cross bars on his vehicle's existing rails in just a few minutes. With the lockable feet securing the bars in place, he mounted his kayak carrier on top. Now, he has all the space he needs inside the car for his family and the gear he needs on the roof, making the trip possible and enjoyable.

Micro Comparison

While some roof racks require complex installation or are made from lightweight materials, these cross bars prioritize strength and security. The 120 cm length offers a generous platform for larger loads, and the integrated locks add a layer of protection that basic racks lack. For a dependable and versatile solution at a practical price, these bars are a smart choice for most SUV owners.

Specifications

- Length: 120 cm / 47.2 in

• Load Capacity: 70 kg / 154.3 lb

• Type: Roof Racks & Boxes

• Compatibility: Universally applicable to vehicles with longitudinal bars

• Features: Feet with locks

Package Includes

- 1 x Set of Roof Rack Cross Bars

Why You Will Love It

You will love the extra freedom these cross bars give you on the road. No more worrying about fitting everything inside your car. With a secure, lockable system that is easy to install, you can pack for any adventure with confidence. It is a simple upgrade that makes a big difference in your travel experience.

Questions and Answers

Question: Will these cross bars fit my SUV?

Answer: They are universally designed to fit vehicles that already have longitudinal (side-to-side) roof bars. Please check your vehicle's roof setup before purchasing.

Question: How much weight can these bars hold?

Answer: They have a maximum load capacity of 70 kg.

Question: Are the feet lockable?

Answer: Yes, the feet come with built-in locks for added security.

Question: What is the length of these cross bars?

Answer: The length is 120 cm.

Question: Can I use these for a roof box?

Answer: Yes, they are suitable for carrying roof boxes, luggage, and other roof accessories.

SPECIFICATIONS

Brand Name: NONE

Charger: no

Choice: yes

Color Name: black

High-concerned chemical: none

Installation Type: Seat Installation

Material: Resin

Origin: Mainland China

Special Features: Adjustable

This tachometer adapter converts RPM signals from your gasoline or diesel engine so your gauge reads accurately. It works with cars, boats, yachts, and other vehicles that need a reliable tacho meter sensor.

Installing an aftermarket tachometer does not have to be complicated. This signal adapter takes the guesswork out of wiring by converting engine pulses into a clean, fixed 4 pulses per round signal. Whether you are upgrading a classic car, adding a gauge to a boat, or troubleshooting a yacht engine, this adapter helps your tachometer display the correct RPM without hunting for a compatible signal source.

The adapter features a plastic shell housing and comes in two installation models. The GR01 model uses a signal cable that wraps around the ignition coil on gasoline engines. The DR01 model mounts directly on top of the alternator for a secure fit. Both models output a consistent 66.6 Hz signal at 1000 RPM, which most tachometers accept without extra configuration.

Set your gauge to 4 pulses per round, and the adapter handles the rest. The onboard LED confirms power and signal detection, so you know the system is working before you close the hood.

Key Features and Benefits

- Fixed 4 pulses per round output that works with most tachometers, so you avoid complex programming

• Two installation methods (GR01 for ignition coil, DR01 for alternator), so you can choose the easiest fit for your engine type

• Built-in LED indicator that shows green when power is on and flashes during configuration, so you can verify setup at a glance

• Plastic shell housing that resists engine bay conditions, so the adapter lasts through daily use

• Compatible with both gasoline and diesel engines, so you can use it across different vehicles and equipment

Who Is This For

- Car owners who are installing an aftermarket tachometer and need a clean RPM signal

• Boat and yacht owners who want to monitor engine RPM on the water with a reliable gauge

• Mechanics and DIY enthusiasts working on gasoline or diesel engines that lack a standard tach output

Usage Scenario

Mark bought a classic 1970s pickup truck that did not come with a tachometer from the factory. He wanted to install an aftermarket gauge but found the engine did not have a dedicated RPM signal wire. After mounting this adapter near the ignition coil and wrapping the signal cable around the coil wire, the tachometer displayed a steady RPM reading on his first test drive. No guessing, no extra wiring — just a clean signal that matched the engine speed.

Micro Comparison

Some tachometers require a specific signal type or voltage range that older engines do not provide. This adapter bridges that gap by converting any compatible engine pulse into a standard 4 pulses per round output. It is a straightforward solution that avoids the need for a standalone signal conditioner or custom wiring harness.

Specifications

- Material: Plastic Shell

• Number Of Cylinders: 4

• Output Signal: Fixed 4 pulses per round (66.6 Hz at 1000 RPM)

• Models Available: GR01 (ignition coil wrap), DR01 (alternator mount)

• Power Supply: 12V DC

Package Includes

- 1 x Tach RPM Signal Adapter (GR01 or DR01 model)

Why You Will Love It

You get a clean, consistent RPM signal without spending hours on wiring diagrams. The adapter works with most engines and fits both ignition coil and alternator setups. It turns a frustrating installation into a simple weekend project.

Questions and Answers

Question: Will this work with a diesel engine in my boat?

Answer: Yes, the adapter is compatible with both gasoline and diesel engines. Use the GR01 model for ignition coil setups or the DR01 model for alternator mounting.

Question: How do I know if the adapter is receiving power?

Answer: The LED on the adapter turns green when power is connected. If the LED does not light up, check your 12V DC connection and ground wire.

Question: Do I need to set anything on my tachometer?

Answer: Set your tachometer to 4 pulses per round. The adapter outputs a fixed 66.6 Hz signal at 1000 RPM, so most gauges work with that setting.

Question: Can I use this on a 6-cylinder engine?

Answer: The adapter is specified for a 4-cylinder engine. It may not output the correct signal for engines with a different cylinder count.

Question: Which model should I choose for a car with a distributor?

Answer: Use the GR01 model. Wrap the input signal cable 5 to 8 turns around the ignition coil cable near the distributor. The DR01 model is for alternator mounting only.

Key Features

• Model-Specific Fit — This tail light assembly is designed for the Mazda Saloon 323 S VI BJ, matching the rear lighting needs of that model.
• Rear Lighting Unit — Serves as the rear light unit for the vehicle, providing the necessary lighting function.
• Replacement Part — Intended as a replacement or upgrade part, it can replace a damaged or worn rear light on the compatible Mazda model.

Product Specifications

• Model Name: For Mazda Saloon 323 S VI BJ
• Type: Tail Light Assembly

What It Is / How It Works

This is a tail light assembly, a rear light unit designed for the Mazda Saloon 323 S VI BJ. It is a replacement or upgrade part for the vehicle's rear lighting.

Who It's For / Use Cases

Tail light assemblies are for car owners who need to replace a damaged or worn rear light, or who want to update the look of their vehicle. They are also useful for mechanics and DIY enthusiasts working on this specific Mazda model.

How to Use / Care

1. Ensure the vehicle is turned off and the keys are removed.
2. Access the rear light housing by opening the trunk or tailgate.
3. Remove the old tail light assembly by unscrewing the retaining bolts or clips, then disconnect the wiring harness and carefully take out the old unit.
4. Connect the wiring to the new assembly and secure it in place with the bolts or clips, then test the lights to ensure they function properly.

How to Choose

When choosing a tail light assembly, verify that it matches your vehicle's make, model, and year. Check the connector type and mounting points to ensure a proper fit. Consider whether you need a complete assembly or just a lens cover, and decide between OEM or aftermarket options based on your budget and preferences.

Frequently Asked Questions

What type of product is this?
This is a tail light assembly, which is a rear light unit for the vehicle.

Which vehicle is this tail light assembly designed for?
It is designed for the Mazda Saloon 323 S VI BJ.

Is this a complete assembly or just a lens?
This is a tail light assembly, meaning it is the complete rear light unit, not just a lens cover.

Can I install this myself?
Yes, if you have basic mechanical skills. The installation involves removing the old unit, connecting the wiring, and securing the new assembly. Always ensure the vehicle is off and keys are removed before starting.

Key Features

• Vehicle Fit — Designed for the Toyota Fortuner model years 2009, 2010, and 2011.
• Complete Assembly — This is a full tail light assembly, not just a replacement bulb or lens.
• Rear Lighting — Functions as a rear lighting component for the vehicle.

Product Specifications

• Type: Tail Light Assembly
• Model Name: For Toyota Fortuner 2009 2010 2011

What It Is / How It Works

This is a tail light assembly for the Toyota Fortuner, specifically for the 2009, 2010, and 2011 model years. It is a rear lighting component designed to fit those vehicles.

Who It's For / Use Cases

Tail light assemblies are for vehicle owners who need to replace a damaged or worn rear light. They are also relevant for those restoring or upgrading the lighting on their car. This particular assembly is intended for owners of a Toyota Fortuner from the listed years.

How to Use / Care

1. Ensure the vehicle is turned off and the headlight switch is in the off position before beginning any work.
2. Remove the existing tail light assembly by unscrewing the retaining bolts or nuts and gently pulling the unit away from the vehicle.
3. Disconnect the electrical connector from the old assembly, then connect it to the new tail light assembly.
4. Position the new assembly in place, secure it with the bolts or nuts, and test the lights to confirm they function correctly.

How to Choose

When selecting a tail light assembly, confirm it matches your vehicle's make, model, and year. Check the type of bulb or LED configuration, and ensure the assembly includes the necessary housing and lens. Consider whether you need a complete assembly or just a replacement part.

Frequently Asked Questions

Which Toyota Fortuner models is this tail light assembly for?
This tail light assembly is designed for the Toyota Fortuner model years 2009, 2010, and 2011.

What type of product is this?
This is a tail light assembly, which is a rear lighting component for the vehicle.

Is this a complete assembly or just a replacement part?
This is a complete tail light assembly, including the housing and lens, ready to be installed on your vehicle.

What should I check before purchasing a tail light assembly?
Confirm the assembly matches your vehicle's make, model, and year.

Upgrade your vehicle's interior lighting with the TCYATO 42-piece SMD LED bulb kit. Designed for cars and RVs, this set provides a bright, clean 6000K xenon white light that makes it easier to see inside your vehicle at night. With multiple bulb sizes and types included, you get a complete solution for replacing dim factory bulbs in your dome light, license plate light, reading light, and more.

Each bulb in this kit is built with durable plastic housing and advanced SMD LED chips for long-lasting performance. The set includes T10 wedge bulbs, festoon bulbs, and bayonet bulbs, so you can handle most common interior lighting needs in one purchase. The 6000K color temperature gives off a crisp white glow that closely matches modern xenon headlights, creating a cohesive and upgraded look inside your car or truck.

Installation is straightforward and requires no special tools. Simply remove your old bulb and plug in the new LED bulb. The bulbs are designed to fit standard 12V DC systems found in most cars, trucks, and RVs. With a rated lifespan of over 50,000 hours, you can expect many years of reliable service without frequent replacements.

This kit covers multiple positions including front, rear, left, and right interior lights. Use them for your map light, dome light, license plate light, glove box light, or trunk light. The variety of sizes ensures you have the right bulb for each socket, making this an all-in-one upgrade package for your vehicle's interior illumination.

Key Features and Benefits

- 42-piece kit with multiple bulb types that lets you replace all interior lights in one go

• 6000K xenon white color temperature that provides bright, clear illumination for better visibility

• Long 50,000-hour lifespan that reduces the need for frequent bulb changes

• Plastic housing construction that offers durability and heat resistance for interior use

• 12V DC compatibility that works with standard car, truck, and RV electrical systems

• Easy plug-and-play installation that requires no wiring modifications or special tools

Who Is This For

- Car owners looking to upgrade dim factory interior lights to bright LED lighting

• RV owners who want consistent, long-lasting lighting for their vehicle's interior spaces

• DIY enthusiasts who prefer to handle their own vehicle lighting upgrades at home

• Anyone needing a comprehensive bulb set to replace multiple interior lights in one purchase

Usage Scenario

Mark had been struggling to find items in his SUV's trunk at night. The factory dome light was dim and cast a yellow glow that made it hard to see. He ordered the TCYATO 42-piece LED kit and replaced all the interior bulbs in under 30 minutes. The difference was immediate. The trunk light was now bright white, and he could easily see his gear. The license plate lights also looked cleaner and more modern. Mark was glad he found a single kit that covered every interior light in his vehicle.

Micro Comparison

Unlike buying individual bulbs from different sellers, this 42-piece kit gives you a complete set of T10 wedge, festoon, and bayonet bulbs in one box. You do not have to guess which size fits each socket. The variety ensures you have the right bulb for dome lights, license plate lights, reading lights, and trunk lights. This saves you time and ensures a consistent 6000K white light throughout your vehicle's interior.

Specifications

- Quantity: 42 pieces

• Material: Plastic

• Type: Interior LED bulb

• Color: Xenon white

• Voltage: DC 12V

• Color temperature: 6000K

• Lifespan: Over 50,000 hours

• Working temperature: 140 degrees Fahrenheit

• Position: Front, rear, left, right

Package Includes

- 6 x T10 1SMD LEDs

• 6 x T10 1210 4SMD LEDs

• 6 x T10 5050 5SMD LEDs

• 6 x Double-tip 31mm 5050 4SMD LEDs

• 6 x Double-tip 41mm 1210 16SMD LEDs

• 6 x 36mm 5050 3SMD LEDs

• 6 x 1157 1206 22SMD LEDs

Why You Will Love It

You will love how a simple bulb swap transforms your car's interior lighting. The bright white glow makes it easier to see at night and gives your vehicle a more modern feel. With a 42-piece set covering multiple bulb types, you get everything you need in one convenient kit, saving you time and hassle.

Questions and Answers

Question: Will these bulbs fit my 2010 Toyota Camry?

Answer: This kit includes T10 wedge bulbs and festoon bulbs that fit many common car interior sockets. Check your vehicle's owner manual for specific bulb sizes before purchasing.

Question: Are these bulbs suitable for RV interior lights?

Answer: Yes, these bulbs are designed for 12V DC systems found in both cars and RVs. They can be used for dome lights, reading lights, and other interior fixtures.

Question: How bright are these 6000K LEDs compared to factory bulbs?

Answer: 6000K LEDs produce a much brighter and whiter light than standard yellow halogen bulbs. You will notice a significant improvement in visibility inside your vehicle.

Question: Do I need any special tools to install these bulbs?

Answer: No special tools are required. Simply remove your old bulb and push the new LED bulb into the socket. Most installations take just a few minutes per bulb.

Question: Can I use these bulbs for my license plate light?

Answer: Yes, the T10 wedge bulbs in this kit are commonly used for license plate lights. The 6000K white light provides a clean, legal illumination for your plate.

Question: Are these bulbs polarity sensitive?

Answer: Some LED bulbs are polarity sensitive. If a bulb does not light up, try flipping it 180 degrees in the socket. This usually resolves the issue.

Question: How long do these LEDs last?

Answer: These bulbs have a rated lifespan of over 50,000 hours, which means many years of use under normal driving conditions.

Upgrade your car's lighting system with the TCYATO D1S D2S D3S D4S LED headlights. These 45W bulbs deliver a bright 6500K beam with a two-sided chip design, making them a direct replacement for your old Xenon HID lamps. The built-in CANBUS system ensures error-free operation on most vehicles, so you can install them and drive without dashboard warnings.

These LED headlights are built for both performance and durability. The aviation aluminum housing and IP68 protection rating mean they can handle harsh weather and road conditions. With an operating temperature range of -40℃ to 85℃ and a product life of over 30,000 hours, these bulbs are designed to last.

Installation is straightforward thanks to the plug-and-play design. The decoding function eliminates the need for additional resistors or adapters, saving you time and effort. The dual copper tube design also helps with heat dissipation, ensuring consistent brightness during long drives.

Whether you are driving on dark highways or navigating through fog, the TCYATO LED headlights provide reliable illumination. The sensitive response of the integrated LED lens allows for quick adjustments to changing driving conditions, giving you better visibility and control.

Key Features and Benefits

- High brightness: The dual copper tube design ensures powerful lighting, providing enhanced visibility on the road.

• Easy installation: The built-in decoding function allows for quick plug-and-play setup without additional modifications.

• Long lifespan: High-quality materials and advanced technology offer over 30,000 hours of reliable use, reducing the need for frequent replacements.

• Energy-efficient: LED technology consumes less power, saving energy and reducing the strain on your vehicle's battery.

• Sensitive response: The integrated LED lens provides quick and precise adjustments to changes in the driving environment.

Who Is This For

- Car owners looking to replace old Xenon HID bulbs with modern LED technology.

• Drivers who want a plug-and-play upgrade without complex wiring or additional parts.

• Anyone seeking durable, weather-resistant headlights suitable for various climates and road conditions.

Usage Scenario

Mark drives a sedan that came with factory-installed D2S HID bulbs. Over time, the bulbs started to dim and flicker. He wanted an upgrade that would give him brighter light without causing dashboard errors. After installing the TCYATO D1S D2S D3S D4S LED headlights, he noticed a clear improvement in visibility on his nightly commute. The installation took less than 20 minutes, and there were no warning lights on his dashboard.

Micro Comparison

Compared to standard halogen bulbs, these LED headlights offer higher brightness and a longer lifespan. They also consume less power, which can help reduce fuel consumption slightly. While some LED kits require additional resistors or decoders, this model comes with a built-in CANBUS system that prevents error messages on most vehicles.

Specifications

- Name: LED Car Headlight Bulb

• Input Voltage: DC 45V

• Starting Power: 55W

• Stable Power: 45W

• Housing Material: Aviation Aluminum

• Protection Level: IP68

• Lamp Bead: CSP4575

• Operating Temperature: -40℃ ~ 85℃

• Product Life: >30,000h

Package Includes

- 1 Pair x LED Car Headlight

Why You Will Love It

You will appreciate the effortless upgrade from old HID bulbs to modern LED technology. The bright 6500K light improves your night driving experience, and the error-free installation gives you peace of mind. With a long lifespan and weather-resistant build, these headlights are a smart investment for your vehicle.

Questions and Answers

Question: Will these LED headlights work with my car's existing bulb socket?

Answer: Yes, they are designed to be a direct replacement for D1S, D2S, D3S, and D4S sockets. They are plug-and-play.

Question: Do I need to install any additional resistors or decoders?

Answer: No, the built-in CANBUS system handles error prevention without needing extra parts.

Question: What is the color temperature of these bulbs?

Answer: They produce a 6500K light, which is a bright white with a slight blue tint.

Question: Are these bulbs waterproof?

Answer: Yes, they have an IP68 protection rating, meaning they are dust-tight and can withstand immersion in water.

Question: How long can I expect these bulbs to last?

Answer: They have a rated lifespan of over 30,000 hours, which is significantly longer than halogen or HID bulbs.

This phone holder is built specifically for Tesla Model 3 Highland (2024-2026) and Model Y Juniper (2025-2026) air vents. It uses a strong N52 magnet to hold your phone securely while driving.

Driving with a phone mount should be simple and reliable. This holder clips onto your Tesla's vent blades in seconds and uses a powerful magnetic system to keep your phone in place, even on rough roads. The design allows for 360-degree rotation, so you can easily switch between portrait and landscape views for navigation or calls.

The base is made from a soft silicone that protects your car's vent blades from scratches. The entire setup is made for one-handed use, letting you snap your phone on and off without fumbling. It also supports wireless charging, so you can keep your phone powered up while you drive.

This mount is a practical upgrade for any Tesla owner who wants a clean, functional way to use their phone in the car. It fits both MagSafe iPhones (12-16 series) and non-magnetic phones with the included metal plate.

Key Features and Benefits

- Military-grade N52 neodymium magnet that holds phones up to 7.5 oz securely, even on bumpy roads

• 360-degree rotation at the ball joint for perfect portrait or landscape viewing

• Soft-touch silicone base that is heat-resistant and scratch-proof, protecting your vent blades from damage

• Universal phone compatibility works with MagSafe iPhones and non-magnetic phones using the included 0.2mm metal plate

• Supports wireless charging, so you can charge your phone and navigate at the same time

• 10-second installation with a simple clip-on design, no tools required

Who Is This For

- Tesla Model 3 Highland owners (2024, 2025, 2026) who need a secure phone mount

• Tesla Model Y Juniper owners (2025, 2026) looking for a vent-mounted solution

• Drivers who want a one-handed, magnetic phone holder for quick access

• Anyone who needs a phone mount that supports wireless charging while driving

Usage Scenario

Sarah drives her Model Y Juniper to work every day. She relies on her phone for GPS navigation through busy city traffic. Before, her phone would slide off the dashboard mount. Now, with this magnetic holder, she just snaps her iPhone onto the vent mount. The 360-degree rotation lets her tilt the screen toward her for a clear view of the map. The wireless charging keeps her battery full during long commutes. She no longer worries about her phone falling or running out of power.

Micro Comparison

Many phone mounts use weak magnets or bulky clamps that block airflow. This holder is designed specifically for Tesla vent blades, using a slim 0.6-inch profile that maintains 85% of your car's airflow. The N52 magnet is stronger than standard magnets, providing a secure grip for larger phones like the iPhone 15 Pro Max or Samsung S24 Ultra.

Specifications

- Material: Rubber, Polyvinyl Chloride

• Installation Type: Vent Installation

• Special Features: Adjustable, Foldable, Rotatable, Hands-free, One-handed operation, Wireless Charging

• Magnet: N52 neodymium magnet

• Phone Weight Capacity: Up to 7.5 oz

• Compatible Phones: MagSafe iPhones (12-16 series), non-magnetic phones with included metal plate

Package Includes

- 1x Vent Clip Base (Flex Silicone)

• 1x Magnetic Phone Head (Black)

• 1x Ultra-Thin Metal Plates

Why You Will Love It

This mount gives you a clean, integrated look inside your Tesla. You get a strong grip that keeps your phone steady, and the quick snap-on design makes it easy to grab your phone when you arrive. It is a simple upgrade that makes every drive more convenient.

Questions and Answers

Question: Does this phone holder work with a phone case?

Answer: Yes, it works with most cases. For non-MagSafe cases, use the included metal plate between the phone and the case.

Question: Will this mount block the air from my car's vents?

Answer: The slim 0.6-inch profile keeps 85% of the airflow open, so your vent still works well.

Question: Can I use this with a Samsung or Android phone?

Answer: Yes. It comes with a thin metal plate that sticks to any non-magnetic phone or case, making it compatible with all smartphones.

Question: How do I install this mount?

Answer: Clip the silicone base onto your Tesla's horizontal vent blades. Then attach the magnetic head to the base. Finally, stick the metal plate to your phone or case and snap it on.

Question: Is the magnet strong enough for a heavy phone like the iPhone 15 Pro Max?

Answer: Yes. The N52 neodymium magnet holds phones up to 7.5 oz, which covers the iPhone 15 Pro Max and Samsung S24 Ultra even on bumpy roads.

This TEEQ magnetic wireless car phone mount is built for Tesla owners who want a clean, clutter-free driving experience. It attaches securely to the car screen and charges your phone at 15W speed, so you can stay focused on the road while your phone stays powered up.

Designed specifically for Tesla Model Y Juniper 2025, Model 3 Highland 2024, Cybertruck, and BYD Seal, this mount fits right in without blocking your view. The silicone gel pad protects your screen from scratches, while the aluminum alloy body keeps the mount sturdy and long-lasting. You get a reliable, one-handed operation that makes grabbing your phone quick and easy.

The mount supports MagSafe for iPhone 12 and newer models, so you can simply stick your phone on and it starts charging. For other devices, a magnetic plate is included as a gift, making this holder compatible with a wide range of phones. The wireless charging models also come with an extra charging cable, so you have everything you need for a seamless setup.

Key Features and Benefits

- Adjustable and rotatable design that lets you position your phone at the perfect angle for easy viewing and one-handed use

• 15W wireless fast charging that keeps your phone battery topped up during every drive, so you never arrive with a low battery

• Silicone gel on the screen contact area that protects your Tesla's interior screen from scratches and damage

• Aluminum alloy construction that feels premium and durable, giving you confidence the mount will last

• MagSafe compatibility for iPhone 12 and above means no extra plates needed, just attach and go

Who Is This For

- Tesla Model Y Juniper 2025, Model 3 Highland 2024, Cybertruck, and BYD Seal owners looking for a dedicated phone mount that fits their car perfectly

• Drivers who want a wireless charging solution that works without cables cluttering the cabin

• iPhone users with MagSafe who want a simple magnetic attachment that charges automatically

Usage Scenario

Sarah just got her new Tesla Model 3 Highland and needed a phone mount that wouldn't block the screen or look out of place. She installed this TEEQ mount in the upper left corner, tightened the knob, and it held firm. Now, she just sticks her iPhone onto the mount, it starts charging, and she can use navigation hands-free without worrying about battery life.

Micro Comparison

Unlike generic phone mounts that rely on vent clips or suction cups, this holder is custom-designed for Tesla and BYD Seal screens, so it fits securely without wobbling. The built-in 15W wireless charging means you don't need a separate charging pad or cable, keeping your dashboard clean and organized.

Specifications

- Material: Rubber, Acrylonitrile Butadiene Styrene (ABS)

• Color: Black

• Charger: Wireless Charger

• Special Features: Adjustable, Rotatable, One-handed operation, Wireless Charging

Package Includes

- 1x Phone stand

• 1x Magnetic plate

• 1x Stand back protection replacement

• 1x Charging cable (for wireless charging models)

Why You Will Love It

You get a phone mount that feels like it was made for your car, not an afterthought. The magnetic hold is strong, the charging is fast, and the installation takes just seconds. It keeps your phone right where you need it, without distracting you from the drive.

Questions and Answers

Question: Does this phone mount work with a phone case?

Answer: Yes, it works with most slim cases. For thicker cases or those without MagSafe, use the included magnetic plate.

Question: Is the 15W wireless charging compatible with all phones?

Answer: The 15W speed works with compatible phones. iPhones charge at their standard wireless speed, and other Qi-enabled phones will charge at their supported rate.

Question: Can I adjust the angle of the mount while driving?

Answer: Yes, the mount is adjustable and rotatable, so you can easily change the angle with one hand.

Question: Will this mount block the Tesla screen or my view?

Answer: No, it is designed to sit in the upper left corner of the screen without blocking your line of sight or the screen display.

Question: Does it come with a charging cable?

Answer: Yes, the wireless charging models include an additional charging cable in the package.