Protect your Tesla Model Y's front camera with a precision-engineered 9H tempered glass shield. This cover is designed to fit the new front-intake camera location on the 2026 Model Y L 6 Seater and the 2025+ Model Y (Juniper), providing robust defense against road debris, rain, and scratches while maintaining crystal-clear camera performance for Sentry Mode and FSD.

Unlike thin plastic films that only offer minimal scratch protection, this solid housing cap uses 9H hardness tempered glass and a 3D structural fit. It envelops the camera unit to deflect high-speed gravel and stones that could damage the expensive OEM camera. The optical-grade glass ensures 99.9% transparency, delivering flawless footage with zero image distortion for your Autopilot and Sentry Mode systems.

Installation is simple and non-destructive. The cover comes with high-strength automotive adhesive. You just clean the lens, peel the backing, and snap it on in seconds. It stays secure at high speeds and through automatic car washes. For best results, ensure the camera lens is completely dry before pressing the shield into place, and avoid car washes for 24 hours after installation.

This cover is tailor-made for the intake grille camera with a "No-Block" design. It protects the lens without entering the camera's field of view, making it a reliable upgrade for your Tesla's front-facing camera system.

Key Features and Benefits

- 9H Tempered Glass that provides superior impact resistance against road debris, gravel, and stones, protecting your OEM camera from cracks.

• 3D Structural Fit that envelops the camera unit for edge-to-edge physical protection from all angles, unlike flat stickers that only cover the surface.

• Optical-Grade Clarity with 99.9% transparency that ensures crystal-clear Sentry Mode footage and flawless FSD/Autopilot performance with zero image distortion.

• Rainproof and Waterproof design that keeps the camera lens dry and functional in all weather conditions, maintaining reliable sentry mode coverage.

• Non-Destructive Installation with high-strength automotive adhesive that allows you to apply it in seconds without any tools or permanent modifications to your vehicle.

• Long-Lasting Durability that resists peeling and yellowing from sun exposure and car washes, built to last the lifetime of your vehicle.

Who Is This For

- Tesla Model Y L 6 Seater (2026) owners who want to safeguard their front-intake camera from road hazards.

• Tesla Model Y Juniper (2025-2026+) drivers looking for a durable, non-film camera protection solution.

• EV owners who rely on Sentry Mode and FSD and need uncompromised camera clarity and protection.

• Drivers who frequently encounter gravel roads, highway debris, or heavy rain and want peace of mind for their camera system.

Usage Scenario

After a long highway drive, Mark noticed a small chip on his Tesla's front bumper. He worried about the expensive front camera behind the intake grille. He installed this 9H tempered glass cover the next day. A week later, a loose stone kicked up by a truck hit the camera area. The glass shield absorbed the impact without a scratch on the original camera. The footage from his Sentry Mode remained perfectly clear, and he felt relieved knowing his investment was protected.

Micro Comparison

Many sellers offer thin plastic films that only prevent light scratches. This product uses a solid 9H tempered glass housing that deflects high-speed debris and stones capable of cracking the camera. The 3D structural fit provides edge-to-edge protection from all angles, unlike flat stickers that leave the sides exposed. It also resists peeling and yellowing over time, making it a more durable and reliable choice for long-term use.

Specifications

Material: 9H Hardness Tempered Glass & Metal

Compatibility: Tesla New Model Y L 6 Seater (2026), Tesla New Model Y Juniper (2025-2026+)

Installation Position: Front Bumper Intake Grille Camera

Function: Anti-Stone Chip, Waterproof, Rainproof, Anti-Scratch

Package Includes

- 1 x 9H Tempered Glass Front Camera Cover

• 1 x Installation Kit (adhesive and cleaning materials)

Why You Will Love It

You will love the confidence of knowing your Tesla's front camera is shielded by 9H tempered glass, not a flimsy film. It keeps your Sentry Mode footage sharp and your FSD system reliable, even after hitting road debris. Plus, the simple snap-on installation means you can protect your camera in minutes without any hassle.

Questions and Answers

Question: Will this cover affect my Tesla's Autopilot or FSD performance?

Answer: No. The optical-grade glass has 99.9% transparency and a "No-Block" design that does not enter the camera's field of view, so Autopilot and FSD function normally.

Question: How do I install this camera cover?

Answer: Clean the camera lens until it is completely dry. Peel the adhesive backing from the cover, then press it firmly into place over the camera. Avoid car washes for 24 hours after installation for best adhesion.

Question: Is this cover compatible with the 2025 Model Y?

Answer: Yes. It is designed for the Tesla New Model Y Juniper (2025-2026+) and the 2026 Model Y L 6 Seater.

Question: Will this cover protect against heavy rain and car washes?

Answer: Yes. The cover is rainproof and waterproof. It stays secure in automatic car washes once the adhesive has fully bonded (wait 24 hours).

Question: Can I remove the cover later without damaging the camera?

Answer: Yes. The installation is non-destructive. You can remove the cover with gentle heat from a hairdryer to soften the adhesive, leaving no residue on the camera.

Replace a failing or faulty tire pressure sensor with this 100% new A0009052102 TPMS unit. Designed for a wide range of Mercedes-Benz and BMW models, this sensor helps you maintain accurate tire pressure readings and keep your vehicle's monitoring system functioning properly.

Your vehicle's tire pressure monitoring system (TPMS) is essential for safety and fuel efficiency. This replacement sensor matches the original equipment specification with OE number A0009052102. It operates at 433MHz and is built to integrate seamlessly with your car's existing electronics, providing reliable data to your dashboard display.

Each sensor arrives as a brand new unit, ready for installation. The 2-year warranty gives you added confidence in its durability and performance. Whether you are replacing a damaged sensor or setting up a full set, this TPMS sensor is a direct-fit option for many modern Mercedes-Benz and BMW vehicles.

Before purchasing, verify your vehicle's original equipment number to ensure proper fitment. If you have any questions about compatibility, contact us for assistance.

Key Features and Benefits

- OE Number A0009052102 that matches original factory specifications for accurate fitment

• 433MHz frequency that communicates correctly with your vehicle's TPMS system

• 100% new condition that ensures reliable performance right out of the box

• 2-year warranty that protects your purchase and gives you long-term peace of mind

• Wide compatibility range that covers multiple Mercedes-Benz and BMW models from 2016 onward

Who Is This For

- Mercedes-Benz E-Class owners with W213, C238, or A238 chassis looking for a direct replacement sensor

• G-Class W463 owners who need a TPMS sensor for model years 2018-2020

• BMW 3 Series, 5 Series, X3, X5, and other compatible model owners seeking an OE-match replacement

• Drivers experiencing TPMS warning lights or inconsistent pressure readings who want a new sensor

Usage Scenario

Mark noticed his Mercedes-Benz E300 dashboard showing a persistent tire pressure warning light. After checking the tires and finding proper pressure, he realized one of the original sensors had failed. He ordered this A0009052102 replacement sensor, had it installed by his local mechanic, and the warning light cleared immediately. Now his TPMS system works as intended, giving him accurate pressure data every time he drives.

Micro Comparison

Aftermarket or generic sensors often require programming or adapters to work with your vehicle. This A0009052102 sensor uses the original equipment OE number, which means it is designed to match the factory specifications for your Mercedes-Benz or BMW. It offers a direct replacement experience without the guesswork of universal options.

Specifications

- OE Number: A0009052102

• OEM Number: A0009052102

• Condition: 100% New

• Frequency: 433MHz

• Warranty: 2 years

Package Includes

- 1 x Tire Pressure Monitor Sensor

Why You Will Love It

You get a factory-matching sensor that restores your TPMS system without complicated setup. The 2-year warranty means you are covered if anything goes wrong. It is a straightforward fix for a common issue that keeps your driving experience safer and more informed.

Questions and Answers

Question: Will this sensor work on my 2018 Mercedes-Benz E300 W213?

Answer: Yes, this sensor is compatible with the Mercedes-Benz E-Class W213 from 2016-2020, including the E300 model.

Question: Does this sensor come pre-programmed?

Answer: This sensor matches OE number A0009052102 and is designed for direct replacement. You should verify compatibility with your vehicle before installation.

Question: Is this a new or used sensor?

Answer: This sensor is 100% new, not refurbished or used.

Question: What frequency does this TPMS sensor use?

Answer: It operates at 433MHz, which is the standard frequency for many Mercedes-Benz and BMW models.

Question: Can I install this sensor myself?

Answer: Installation typically requires tire dismounting and sensor mounting. We recommend having a professional tire shop or mechanic handle the installation.

Restore clear rear visibility on your Mercedes-Benz SUV with a direct replacement rear wiper arm and blade assembly. This wiper set matches OE number A1648200744 and is built to fit multiple W166 and W164 models including the ML350 and ML500.

This rear wiper assembly combines a durable ABS arm with a rubber blade for consistent wiping performance. It is designed as a direct replacement part, so you can install it quickly without modifications. The assembly helps clear rain, snow, and road spray from your rear window, giving you a better view when reversing or changing lanes.

Built from ABS and rubber, this wiper arm and blade set resists wear from sun, rain, and temperature changes. The materials support long-term use on daily drivers and weekend SUVs alike. Whether you are replacing a worn arm or a torn blade, this kit covers both components in one purchase.

Before ordering, verify your vehicle's year and model against the fitment list. The part number A1648200744 is the reference to match. If you are unsure, contact us with your VIN or current wiper arm details to confirm compatibility.

Key Features and Benefits

- ABS and rubber construction that resists weather exposure and provides reliable wiping

• Direct replacement design that installs without special tools or modifications

• Includes both the wiper arm and blade so you replace the entire rear wiper assembly at once

• Matches OE number A1648200744 for accurate fitment on compatible Mercedes models

Who Is This For

- Mercedes-Benz ML350, ML500, ML550, and ML63 AMG owners from 2006 to 2015

• Mercedes-Benz GLE-Class owners from 2016 to 2019 needing a rear wiper replacement

• DIY car owners who prefer a plug-and-play wiper assembly without complex installation

• Drivers who want one package containing both the arm and blade for a full rear wiper swap

Usage Scenario

James noticed his 2012 ML350 rear wiper was leaving streaks across the glass during a rainy commute. The arm had loosened over time and the rubber blade was cracked. He ordered this A1648200744 replacement assembly, removed the old arm, and snapped the new one into place in under ten minutes. The next morning, the rear window was clear and the wiper moved smoothly across the glass.

Micro Comparison

Some aftermarket wiper blades only replace the rubber insert, leaving the original arm in place. This assembly provides a complete arm and blade set, so you replace worn metal components as well as the rubber. It eliminates guesswork about arm fitment because the arm and blade are matched to work together.

Specifications

- Item Type: Rear Wiper Arm + Blade

• Material: ABS + Rubber

• OE: A1648200744

• Placement: Rear

Package Includes

- 1 x Rear Wiper Arm

• 1 x Rear Wiper Blade

Why You Will Love It

You get a complete rear wiper assembly that fits multiple Mercedes SUV generations. The direct replacement design saves time and frustration. With both the arm and blade included, you do not need to hunt for separate parts.

Questions and Answers

Question: Will this fit a 2015 Mercedes ML250 Bluetec?

Answer: Yes, this wiper arm and blade assembly fits the 2015 ML250 Bluetec 4MATIC Sport Utility 4-Door.

Question: Does this include the wiper blade or just the arm?

Answer: The package includes one rear wiper arm and one rear wiper blade.

Question: What material is the wiper arm made of?

Answer: The wiper arm is made of ABS plastic and the blade uses rubber.

Question: Can I install this without going to a mechanic?

Answer: Yes, this is a direct replacement part designed for simple DIY installation.

Question: How do I confirm this fits my car before ordering?

Answer: Check your vehicle year and model against the fitment list. The OE number A1648200744 is the reference to match.

The A590 Head Up Display gives you a clear digital view of your car's vital data without taking your eyes off the road. It combines OBD2 and GPS tracking to show RPM, voltage, oil pressure, and turbo boost on a full LCD screen.

This digital gauge replaces traditional mechanical instruments with a modern LCD display. You can place it freely on your car's central console for easy reading. The system features a driving score function that records your trip behavior and provides alerts, helping you build safer driving habits.

The A590 offers 9 different theme interfaces so you can customize the look to match your style. It is compatible with most vehicles from 2008 onwards. Note that the driving score feature works with petrol cars and is not supported by trams.

Switching from analog gauges to a digital display makes your car data more intuitive and easier to read at a glance. The A590 helps you stay informed while keeping your focus on the road ahead.

Key Features and Benefits

- Full LCD display that shows clear and intuitive car data for quick reading

• OBD2 and GPS dual positioning for accurate speed and location tracking

• Driving score system that records trip behavior and scores your driving for safer habits

• 9 theme interfaces that let you personalize the display look

• Pluggable design that allows flexible placement on your car's central console

• Compatibility with most vehicles from 2008 onwards for broad use

Who Is This For

- Car enthusiasts who want a modern digital upgrade from traditional mechanical gauges

• Drivers who want to monitor real-time engine data like RPM, voltage, and turbo pressure

• Safety-conscious drivers who want driving behavior feedback to improve their habits

• Owners of petrol cars from 2008 and newer looking for an easy-to-install HUD system

Usage Scenario

Mike installed the A590 in his 2010 sedan to replace his old analog gauges. During his daily commute, he noticed the digital display made it much easier to check his RPM and speed without looking down. The driving score alerted him when he accelerated too quickly, helping him adjust his driving style. After a week, his score improved and he felt more in control behind the wheel.

Micro Comparison

Traditional mechanical gauges can be hard to read quickly and take up dashboard space. The A590 uses a full LCD screen that displays multiple data points clearly in one place. Its driving score feature adds a layer of feedback that standard HUDs do not offer, making it a practical upgrade for drivers who want both information and safety insights.

Specifications

- Material: ABS + Metal

• Color: As Shown

• Compatibility: Suitable for most vehicles from 2008 onwards

• Note: Driving score feature is not supported by trams; only supports petrol cars

Package Includes

- 1 x Host

• 1 x 1.8m Connecting Line

• 2 x Double-Sided Tape

• 1 x English Manual

• 1 x Bracket

• 1 x Crowbar

Why You Will Love It

You will love how the A590 brings your car's dashboard into the digital age. The clear LCD display and driving score system give you useful feedback every time you drive. It is a simple upgrade that makes your daily commute safer and more engaging.

Questions and Answers

Question: Will this work with my 2015 diesel car?

Answer: The A590 is designed for petrol cars. The driving score feature does not support diesel vehicles or trams.

Question: Can I install this myself?

Answer: Yes, the package includes a bracket, double-sided tape, and a crowbar for easy installation. The English manual provides step-by-step guidance.

Question: Does it show turbo boost pressure?

Answer: Yes, the A590 displays turbo boost pressure along with RPM, voltage, and oil pressure.

Question: How many display themes are available?

Answer: The A590 comes with 9 different theme interfaces that you can switch between.

Question: Is the display bright enough for daytime driving?

Answer: The full LCD screen is designed to be clear and readable in various lighting conditions, including daytime driving.

SPECIFICATIONS

Brand Name: A Little Change

Choice: yes

High-concerned chemical: None

Item Height: 10

Item Length: 30

Item Width: 15

Material: Plastic

Origin: Mainland China

Sticker Placement: Outlet,Center Console,AIR PANEL

semi_Choice: yes

SPECIFICATIONS

Brand Name: AIRSPEED

Carbon Fiber Sticker 1: For Tesla Model 3

Carbon Fiber Sticker 2: For Tesla Model 3 Interior Trim

Carbon Fiber Sticker 3: For Tesla Model 3 Carbon Fiebr

Carbon Fiber Sticker 4: For Tesla Model 3 2024

Choice: yes

High-concerned chemical: None

Material: Carbon Fiber

Origin: Mainland China

Sticker Placement: Suite Kit,Steering Wheel

semi_Choice: yes

SPECIFICATIONS

Brand Name: KOLEN

Choice: yes

High-concerned chemical: None

Material: Plastic

Origin: Mainland China

SPECIFICATIONS

Brand Name: KOLEN

Choice: yes

High-concerned chemical: None

Material: Plastic

Origin: Mainland China

SPECIFICATIONS

Brand Name: KOLEN

Choice: yes

High-concerned chemical: None

Material: Plastic

Origin: Mainland China

Give your Jeep Wrangler a bold new look with this durable ABS front grille, designed specifically for 2007-2017 models. It serves as a protective guard and stylish cover that upgrades the front end of your vehicle.

This black grille refit is a popular choice for Jeep owners looking to modernize their ride. It offers a simple way to change the appearance of your Wrangler without a full custom build. The design mimics the look of a JL-style grille, making it a great option for those who want to update their JK.

Made from tough ABS material, this grille cover is built to handle daily driving and off-road conditions. It adds a layer of protection to your original grille against rocks, debris, and minor impacts. Installation is straightforward, allowing you to refresh your Jeep's look in a short time.

Whether you are driving through the city or heading out on a trail, this grille guard helps your Jeep stand out. It combines function with style, giving you a rugged accessory that fits your vehicle's personality.

Key Features and Benefits

- Durable ABS material that provides long-lasting protection against road debris and minor impacts

• Black finish that matches most Jeep exteriors and adds a sleek, aggressive look

• Specifically designed for Jeep Wrangler 2007-2017 models for a precise fit

• JL-style refit design that updates the appearance of older JK models

• Simple installation process that lets you upgrade your grille quickly

Who Is This For

- Jeep Wrangler owners with 2007-2017 models looking for a front-end style upgrade

• Off-road enthusiasts who want extra protection for their factory grille

• DIY car owners who prefer easy bolt-on accessories

• Anyone wanting to give their JK a more modern JL-inspired look

Usage Scenario

Mark was driving his 2012 Jeep Wrangler on a gravel trail when a loose rock flew up and hit the front grille. He had just installed this black ABS grille cover the week before. The cover took the hit without any damage, keeping his original grille safe. Mark was glad he added the extra protection and liked how the new grille gave his old Jeep a tougher, more current appearance.

Micro Comparison

This grille cover is a cost-effective alternative to buying a whole new grille assembly. While some options require cutting or modifying your vehicle, this cover fits directly over your existing grille. It gives you the look of a JL-style front end without the expense of a full front clip conversion.

Specifications

- Material: ABS

• Item Type: Racing Grills

• Compatible Model Year: 2007-2017

Package Includes

- 1 x Front Grille Cover

Why You Will Love It

You will love how this simple accessory transforms the front of your Jeep. It adds a layer of protection that gives you peace of mind on rough roads. The updated style makes your Wrangler feel fresh and ready for any adventure.

Questions and Answers

Question: Will this grille fit my 2010 Jeep Wrangler Unlimited?

Answer: Yes, it fits all Jeep Wrangler models from 2007 to 2017, including the Unlimited.

Question: Do I need to cut or modify my existing grille to install this cover?

Answer: No, this cover installs directly over your factory grille without cutting or major modifications.

Question: Is this grille cover painted or just raw black plastic?

Answer: It comes in a black finish directly from the molding process. It is ready to install as is.

Question: Will this work with aftermarket bumpers or winch mounts?

Answer: It is designed to fit the stock grille area, but fitment with aftermarket bumpers may vary. Check your setup for clearance.

Question: How do I clean this grille cover?

Answer: Use a mild soap and water solution with a soft cloth. Avoid harsh chemicals that may damage the ABS material.

Keep your vehicle safe and monitored at all times with the Acceo 4G LTE Car Dashcam. This advanced car recorder captures 2K video from the front and 1080P from the rear, giving you a complete view of the road. With built-in GPS tracking, collision warnings, and live view through the HotKam app, you can check on your car from anywhere. The human detection feature adds an extra layer of security, alerting you when motion is detected near your parked vehicle.

This dashcam is built for continuous use. It connects to a 4G LTE network for remote access, so you can watch live footage, see your car's location on a map, and receive instant alerts. The Sony IMX335 sensor and F1.8 aperture work together to capture clear details, even in low light. Whether you are driving or parked, this device gives you peace of mind.

Installation is simple with the included cables and mounting kit. The supercapacitor design handles extreme temperatures from -10°C to 70°C, making it reliable in hot or cold weather. You can store up to 256GB of footage on a memory card, and critical clips are automatically saved to the cloud when an incident occurs. This dashcam is a smart choice for anyone who wants to protect their car and have proof on hand.

Key Features and Benefits

- 4G LTE connectivity that allows you to view live footage and track your car's location from your phone anytime.

• 2K front camera and 1080P rear camera that capture sharp, detailed video to cover both sides of your vehicle.

• Built-in GPS tracking that logs your route and speed, and helps you find your car with the "Find My Car" feature.

• Collision warning and G-sensor that automatically lock and save footage when an impact is detected, preserving evidence.

• Human and pedestrian detection that alerts you to movement around your car, adding security when parked.

• Cloud storage that uploads photos and videos instantly after an incident, so your evidence is safe even if the camera is removed.

Who Is This For

- Drivers who want to monitor their car remotely and check live video from their phone while at work or on vacation.

• Owners of RVs, trucks, or vans who need a waterproof rear camera to see behind large vehicles or through tinted windows.

• Anyone who parks on the street or in public lots and wants motion alerts and recorded evidence in case of vandalism or theft.

• Fleet managers or ride-share drivers who need GPS tracking, route logs, and real-time camera feeds for safety and accountability.

Usage Scenario

Maria parks her car on a busy city street every night. One morning, she finds a scratch on the bumper. She opens the HotKam app on her phone and checks the footage from the previous night. The dashcam captured a pedestrian walking too close and bumping into her car. The clip was automatically saved to the cloud, so she has clear evidence to share with her insurance company. She also uses the GPS tracking to find her car quickly in a crowded mall parking lot on weekends.

Micro Comparison

Many dashcams only record while you drive and rely on Wi-Fi for remote access. This Acceo model uses a 4G LTE connection, so you can view live video and get alerts from anywhere, not just near your home Wi-Fi. The dual cameras provide full coverage, and the cloud backup ensures your footage is safe even if the memory card is damaged or the camera is stolen. It is a more complete solution for drivers who want constant protection.

Specifications

- Camera Resolution: Front 2560x1440P, Rear 1920x1080P

• Viewing Angle: Front 165°, Rear 145°

• Aperture: F1.8

• Imaging Sensor: Sony IMX335

• GPS Logger: Internal

• Loop-Cycle Recording: Yes

• G-Sensor: Yes

• Max External Memory: Up to 256GB (Class 10)

• Battery: Built-in 5mAh

• Power Source: Corded Electric (Input 12V-24V, Output 4.75V-5.25V)

• Working Temperature: -10°C to 65°C

• Video Codec: H.264

• Interface: USB 2.0, AV-In, Micro SD/TF

• Certification: CE, FCC, RoHS

• Warranty: 365 Days

Package Includes

- 1 x Dashcam B73

• 1 x 24-Hour Parking Cable

• 1 x User Manual

• 1 x USB Card Reader (Gift)

• 1 x Electrostatic Sticker

• 1 x 6M Rearview Camera

Why You Will Love It

You get a full security system for your car in one device. The 4G connection means you are never out of touch with your vehicle, whether you are at work or traveling. The clear 2K video and smart alerts give you the proof you need if something happens. It is a reliable, always-on partner for every drive and every parking spot.

Questions and Answers

Question: Does this dashcam work without a SIM card?

Answer: Yes, you can use it without a SIM card for local recording. The 4G features like live view and remote alerts require a SIM card with data.

Question: How do I view the live feed from my phone?

Answer: Download the HotKam app, connect the dashcam to a 4G network, and you can watch live video from anywhere using your phone.

Question: Can I use my own memory card?

Answer: Yes, you can use a micro SD card up to 256GB. It must be Class 10 or higher for smooth recording.

Question: Is the rear camera waterproof?

Answer: Yes, the rear camera is waterproof and can be mounted outside the vehicle for a clear view behind RVs, trucks, or vans.

Question: What happens if my car is hit while parked?

Answer: The G-sensor detects the impact and automatically locks and saves the footage. If cloud storage is active, the clip is also uploaded for safekeeping.

Check your tire pressure quickly and accurately with this easy-to-read dial gauge. It helps you maintain the correct PSI for safer driving, better fuel economy, and longer tire life.

This tire pressure gauge gives you a precise reading every time. The large dial face shows pressure in both PSI and Kgf/cm2, so you can easily see your current tire pressure at a glance. It includes a handy bleed valve that lets you release air to reach your exact desired pressure.

Built for daily use, this gauge features a durable ABS and metal construction with a protective rubber cover. It is designed to withstand drops and everyday wear and tear. The compact pocket size means you can keep it in your glove box or tool kit without taking up much space.

Keeping your tires properly inflated improves your car's handling and braking. It also reduces the risk of tire damage from overinflation or underinflation. This tool works for cars, motorcycles, and bicycles, making it a useful addition to any vehicle owner's gear.

Key Features and Benefits

- Dual pressure scale (PSI and Kgf/cm2) that lets you read measurements in your preferred unit

• Built-in air bleed valve that helps you fine-tune tire pressure to the exact recommended level

• Stainless steel and ABS metal construction that resists rust and corrosion for long-lasting use

• Protective rubber casing that cushions the gauge if it is accidentally dropped

• Pocket-sized design that makes it easy to store in your car or carry with you

• High accuracy of +/-2% that gives you reliable readings every time

Who Is This For

- Car owners who want to check and maintain proper tire pressure at home or on the road

• Motorcycle and bicycle riders who need a portable gauge for quick pressure checks

• DIY mechanics who prefer a simple analog tool over digital gauges

• Anyone who wants to improve fuel efficiency and extend tire lifespan

Usage Scenario

David noticed his car felt a bit bumpy during his morning commute. He pulled into a gas station, but the air pump gauge was broken. He remembered the small tire gauge he kept in his glove box. He checked each tire and found the front left was 10 PSI below the recommended level. Using the bleed valve, he adjusted the pressure to the correct setting. The drive home was much smoother, and he felt more confident about his car's safety.

Micro Comparison

Unlike digital gauges that can run out of battery or fail in cold weather, this analog dial gauge works every time without power. The pointer-style display is easy to read even in bright sunlight. The built-in bleed valve is a practical feature that many simple stick-type gauges do not offer, giving you more control over your tire pressure.

Specifications

Accuracy: +/-2%

Display Type: Pointer-type

Material: ABS + Metal

Measurement Units: PSI, Kgf/cm2

Measuring Range: 0 - 60 PSI / 0 - 4.2 Kgf/cm²

Dimensions: Length: 110 mm / 4.3 in, Diameter: 46 mm / 1.8 in

Package Includes

- 1 x Tire Pressure Gauge

Why You Will Love It

You get a reliable, no-battery-needed tool that helps you take control of your vehicle's maintenance. It gives you peace of mind knowing your tires are at the right pressure for every trip. It is a small investment that can save you money on fuel and tire replacements.

Questions and Answers

Question: Is this gauge accurate for everyday use?

Answer: Yes, it has an accuracy of +/-2%, which is reliable for checking and adjusting tire pressure at home or on the road.

Question: Can I use this on a bicycle tire?

Answer: Yes, it works on all vehicles with pneumatic tires, including bicycles, motorcycles, and cars.

Question: How do I release air from the tire with this gauge?

Answer: Press the small button or valve on the side of the gauge to bleed air until you reach your desired pressure.

Question: Does this gauge need batteries?

Answer: No, it is an analog dial gauge with a pointer. It does not require any batteries to function.

Question: What pressure units does it show?

Answer: The dial displays pressure in both PSI (0-60) and Kgf/cm2 (0-4.2), so you can use whichever unit your vehicle manual recommends.

SPECIFICATIONS

Brand Name: SHIDWJ

Choice: yes

Fragrant Object Form: Other forms

Functional Features: Basic air freshness

High-concerned chemical: None

Is Electric: no

Item Type: AIR FRESHENER

Origin: Mainland China

Scented or not: No

Wireless Support: No

semi_Choice: yes

Keep an eye on your engine's vital signs with this versatile 2-inch 52mm car gauge set. Featuring a bright red and blue dual LED display, it lets you monitor boost, water temperature, oil temperature, oil pressure, voltage, RPM, vacuum, air-fuel ratio, and exhaust gas temperature all from one stylish unit. It is designed for 12-volt gasoline vehicles and is a practical upgrade for any dashboard.

This gauge gives you a complete picture of your engine's performance. The digital and graphic dual display makes it easy to read critical information at a glance. You can switch between red and blue lighting to match your car's interior or personal preference, with two separate light lines for easy color control. Each gauge comes with an English user manual to help with installation.

Whether you are tuning for performance or just want to keep your engine running smoothly, this set provides the data you need. It includes sensors for boost, water temperature, oil temperature, oil pressure, and exhaust temperature, so you get accurate readings right from the source. The tachometer is specifically designed for 4, 6, or 8-cylinder engines, making it a versatile choice for many common vehicles.

Built from durable plastic and metal, this 52mm gauge is built to last. It offers a professional look and feel without the high price tag of a full custom setup. With the ability to monitor up to nine different functions, it is a smart and efficient way to protect your engine and improve your driving experience.

Key Features and Benefits

- Dual red and blue LED lighting that you can switch to match your style or dashboard lighting.

• Monitors nine key engine functions including boost, vacuum, and exhaust temperature for complete engine awareness.

• Digital and graphic dual display for clear and quick readings at any time.

• Includes sensors for boost, water temp, oil temp, oil pressure, and exhaust temp for accurate data.

• Built from plastic and metal for long-lasting durability on the road.

• Works with 4, 6, or 8-cylinder 12-volt gasoline vehicles for broad compatibility.

Who Is This For

- Car enthusiasts who want a complete engine monitoring solution without buying multiple separate gauges.

• DIY mechanics installing a performance or turbo system who need real-time boost and vacuum readings.

• Daily drivers who want to keep a close watch on engine temperature and oil pressure to prevent overheating or damage.

• Owners of 4, 6, or 8-cylinder gasoline vehicles looking for an affordable and functional dashboard upgrade.

Usage Scenario

Mike just finished installing a turbo kit on his 1990s hatchback. He needed a reliable way to see his boost pressure and air-fuel ratio without guessing. After mounting this 52mm gauge set, he could finally watch his boost peak at 10 PSI and adjust his fuel mixture for a safer, stronger pull. The red LED matched his interior perfectly, and the easy-to-read numbers gave him confidence every time he hit the gas.

Micro Comparison

Unlike buying nine separate gauges that clutter your dashboard and require complex wiring, this single-unit set combines all essential readouts into one compact 52mm housing. It offers a clean, integrated look while still providing the same critical data. The dual-color LED option also gives you a level of customization that many basic single-color gauges do not offer.

Specifications

Item Diameter: 52 mm / 2 in

Material: Plastic and Metal

Voltage: 12V

Tachometer Range: 0 to 10,000 RPM (for 4, 6, 8 cylinder engines)

Boost Gauge Range: -30 to 35 PSI

Vacuum Gauge Range: -1 to 0 Bar

Water Temperature Range: 40 to 140 °C

Oil Temperature Range: 50 to 150 °C

Oil Pressure Range: 0 to 150 PSI

Voltmeter Range: 8 to 18 V

Air Fuel Ratio Range: 10:1 to 20:1

Exhaust Temperature Range: 200 to 1200 °C

Package Includes

- 1 x Tachometer Gauge

• 1 x Turbo Boost Gauge

• 1 x Vacuum Gauge

• 1 x Water Temperature Gauge with Sensor

• 1 x Oil Temperature Gauge with Sensor

• 1 x Oil Pressure Gauge with Sensor

• 1 x Volts Gauge

• 1 x Air Fuel Ratio Gauge

• 1 x Exhaust Temperature Gauge with Sensor

• English User Manuals for each gauge

Why You Will Love It

You will love the peace of mind that comes from seeing every critical engine reading in one place. The dual-color LED lets you personalize your cabin, while the complete sensor set saves you the hassle of buying extra parts. It is a smart, simple way to protect your engine and enjoy a more connected driving experience.

Questions and Answers

Question: Is this gauge set compatible with diesel engines?

Answer: No, this gauge set is designed for 12-volt gasoline vehicles only. The tachometer is specifically for 4, 6, or 8-cylinder gasoline engines.

Question: Does the set include all the necessary sensors?

Answer: Yes, it includes sensors for boost, water temperature, oil temperature, oil pressure, and exhaust temperature. The other gauges (tachometer, vacuum, volt, air-fuel ratio) do not require separate sensors.

Question: How do I switch between the red and blue LED colors?

Answer: The gauge has two separate light wires. Connecting one wire will light up the red LED, and connecting the other will light up the blue LED. You can choose which color to use.

Question: What is the size of this gauge?

Answer: The gauge has a standard 2-inch (52mm) diameter, which fits into most universal gauge pods and dash kits.

Question: Does the tachometer work on a 4-cylinder engine?

Answer: Yes, the tachometer is suitable for 4, 6, and 8-cylinder 12-volt gasoline engines.

Get accurate speed and distance data on your boat, car, or RV with this 52mm digital GPS speedometer. It uses a satellite signal to show your speed in mph, km/h, or knots, and tracks both trip and total mileage. The clear TFT screen and simple controls make it a practical upgrade for any dashboard.

This speedometer is built to handle the demands of life on the water or the road. The 52mm gauge fits into standard dashboard openings, and the waterproof design helps it stand up to splashes and weather. It connects easily to a 12V or 24V power system, making it versatile for different vehicles.

You can switch between speed units with a simple wire connection. The trip meter resets when you power down, while the odometer saves your total distance even after the power is off. A built-in digital compass adds extra navigation help. The package includes the speedometer and an optional gauge holder, so you can choose the setup that fits your needs.

Key Features and Benefits

- GPS satellite signal provides accurate speed and distance data without needing a mechanical connection

• TFT screen shows clear, easy-to-read numbers for speed, trip, and odometer readings

• Waterproof construction helps protect the gauge from moisture and weather during marine or outdoor use

• Switchable units let you read speed in mph, km/h, or knots with a simple wire contact

• Digital compass displays heading from 0 to 359 degrees for basic navigation assistance

• Memory function saves total odometer data even after power loss so you don't lose your records

Who Is This For

- Boat owners who need a reliable, waterproof GPS speed display for marine navigation

• Car and RV enthusiasts looking for a digital upgrade to a traditional analog speedometer

• Anyone replacing a broken or inaccurate speed gauge with a modern GPS-based solution

Usage Scenario

Mark took his fishing boat out on a large lake where the old mechanical speedometer had stopped working. He installed this 52mm GPS speedometer in the dash, connected the red wire to power and the black wire to ground, and had a clear digital speed readout in knots within seconds. The trip meter helped him track how far he traveled between fishing spots, and the compass gave him a quick heading reference when clouds hid the sun. After a full day on the water, the gauge was still working perfectly, with no fogging or moisture inside the lens.

Micro Comparison

Traditional mechanical speedometers rely on a pitot tube or cable drive that can clog, break, or wear out over time. This GPS speedometer uses satellite signals instead, so there are no moving parts to fail and no sensors to mount on the hull or wheel. It gives you accurate readings regardless of water conditions or tire size, making it a simpler and more reliable choice for many boats, cars, and RVs.

Specifications

- Gauge Size: 52mm / 2.05 in diameter

• Material: 316L stainless steel

• Power Input: 9-32 VDC (works with 12V and 24V systems)

• Tachometer Display Range: 0-999.9

• Total Odometer Range: 0-999999

• Trip Odometer Range: 0-999.9

• Digital Compass Range: 0-359 degrees

• Waterproof: Yes

• Weight: 500g / 17.6 oz

• Wiring: Black (Ground), Red (9-32 VDC Power), Yellow (Switch Unit)

Package Includes

- 1 x GPS Speedometer

• OR

• 1 x 52mm Gauge Holder (optional selection)

Why You Will Love It

You will love how easy it is to get accurate speed data without complicated installation or calibration. The waterproof build gives you peace of mind on the water, and the ability to switch between mph, km/h, and knots makes it useful whether you are driving on the highway or cruising on a lake. It is a simple, reliable tool that makes your dashboard more functional.

Questions and Answers

Question: Does this GPS speedometer work on a 12V boat battery?

Answer: Yes, it operates on any power input from 9 to 32 VDC, so it works with standard 12V and 24V systems found in boats, cars, and RVs.

Question: How do I switch between mph and km/h on this speedometer?

Answer: You briefly touch the yellow wire to the negative terminal (ground) to cycle through the available units: knots, mph, and km/h. The setting is saved automatically.

Question: Is the gauge waterproof for use on an open boat?

Answer: Yes, the speedometer is designed to be waterproof, making it suitable for marine environments where it may be exposed to splashes and rain.

Question: Does the odometer keep my total mileage after the power is turned off?

Answer: Yes, the total odometer (ODO) saves accumulated mileage data even after a power outage. Only the trip meter (TRIP) resets when power is disconnected.

Question: What size hole do I need to mount this gauge in my dashboard?

Answer: The gauge has a standard 52mm / 2.05 inch diameter body, so you will need a mounting hole of approximately 52mm. A gauge holder is available as an optional add-on.

Keep your engine running at its best with a complete set of 52mm car gauges. This series includes a turbo boost gauge, water temperature gauge, oil temperature gauge, oil pressure gauge, voltmeter, air fuel ratio gauge, exhaust gas temperature gauge, and more. Each gauge provides precise, real-time data to help you monitor your vehicle's vital systems.

These gauges are designed for most 12-volt gasoline vehicles and fit standard 52mm or 2-inch gauge pods. The stepper motor movement ensures accurate readings, and the digital display makes it easy to see your engine's status at a glance. Whether you are tuning for performance or just keeping an eye on daily driving conditions, these gauges give you the information you need.

The set includes multiple gauge options so you can choose the specific measurements that matter most to you. From monitoring boost pressure to checking exhaust gas temperature, you can build a custom dashboard that fits your driving style. The black face and simple design blend well with most interior styles.

Installation is straightforward for those with basic wiring knowledge. Each gauge comes with a sensor and an English instruction manual. Note that these meters use stepper motors and need to be powered on to return to zero. It is normal for the pointer not to return to zero when the power is off.

Key Features and Benefits

- Digital display that makes it easy to read your engine data at a quick glance

• Stepper motor movement for precise and stable parameter readings with low power consumption

• Anti-vibration and anti-bump design that holds up well under tough driving conditions

• Universal fitment for most 12-volt gasoline vehicles with a standard 52mm or 2-inch gauge opening

• Multiple gauge types available in one series so you can monitor boost, temperature, pressure, voltage, and air-fuel ratio

Who Is This For

- Car enthusiasts who want to keep a close eye on engine performance and health

• DIY mechanics looking for an affordable way to add professional-grade monitoring to their vehicle

• Drivers of turbocharged or modified cars who need to track boost pressure and exhaust gas temperature

• Anyone building a custom gauge cluster who needs a complete set of matching 52mm instruments

Usage Scenario

Mark just finished installing a new turbo kit on his hatchback. He wanted to make sure everything was running safely, so he added a boost gauge and an exhaust gas temperature gauge from this series. On his first test drive, he could see exactly how much boost the turbo was making and keep the EGT within a safe range. The digital display was easy to read even in direct sunlight, and the gauges fit perfectly into his aftermarket gauge pod. Now he drives with confidence, knowing he can spot any issues before they become problems.

Micro Comparison

Unlike basic dashboard warning lights that only tell you something is wrong after the fact, these gauges give you real-time data so you can react before damage occurs. Many generic gauges use cheap movements that drift over time, but the stepper motor in this series holds its calibration and delivers consistent readings. This set also offers more variety than most single-brand kits, letting you pick exactly the gauges you need without buying extras you will not use.

Specifications

- Material: Plastic shell

• Diameter: 52mm / 2 inches

• Voltage: DC 12V

• Color: Black

• Item Weight: 500g / 17.6 oz

Package Includes

- 1 x Gauge of your choice (turbo, water temp, oil temp, oil pressure, voltmeter, air fuel ratio, EGT, vacuum, or tachometer)

• 1 x Sensor (included with most gauge types)

• 1 x English Installation Instruction

Note: The gauge holder is not included and must be purchased separately. Please confirm which gauge type you are ordering as the package contents vary by selection.

Why You Will Love It

Having real-time engine data at your fingertips gives you peace of mind on every drive. These gauges help you catch small issues before they turn into expensive repairs. With a clean look and reliable stepper motor technology, this set is a smart upgrade for anyone who cares about their car's performance.

Questions and Answers

Question: Will these gauges work in my diesel truck?

Answer: These gauges are designed for most 12-volt gasoline vehicles. They may not be compatible with diesel engines without additional adapters. Please check your vehicle's specifications before ordering.

Question: Do I need to buy anything else to install these gauges?

Answer: You will need a gauge pod or mounting bracket to hold the gauge. The gauge itself and the sensor are included, but the holder is sold separately.

Question: Why does the needle not return to zero when I turn off the car?

Answer: This is normal. These gauges use stepper motors that require power to return to the zero position. The needle will only reset after the gauge is powered on.

Question: Can I mix and match different gauges from this series?

Answer: Yes, you can choose any gauge type from the series. Each gauge has the same 52mm size and black finish, so they look consistent when installed together.

Question: How do I know which sensor wire goes where?

Answer: An English installation instruction is included with your gauge. It shows the wiring diagram and explains how to connect the sensor and power wires correctly.

Keep an eye on your engine's health with this 2-in-1 car LCD gauge that combines a water temperature meter and a voltmeter in one compact unit. It gives you a clear digital readout of both coolant temperature and battery voltage so you can spot potential issues before they turn into costly repairs.

This gauge is built for drivers who want reliable real-time data without cluttering the dashboard. The bright digital display makes it easy to read at a glance, even in direct sunlight. It works with both 12V and 24V electrical systems, making it a versatile choice for cars, trucks, SUVs, and motorcycles.

Installation is straightforward thanks to the included water temperature sensor and pre-wired cables. The sensor screws directly into your engine's cooling system using the M10 thread, and the gauge connects to your power supply with simple red and black wires. Once installed, the display shows temperature and voltage readings with high precision and low power consumption.

If the temperature or voltage goes outside the normal range, the display starts flashing as an alarm. This early warning system helps you react quickly to overheating or electrical problems, giving you more control over your vehicle's condition on the road.

Key Features and Benefits

- Dual display shows water temperature and battery voltage at the same time for complete engine monitoring

• Digital LCD readout provides clear, intuitive readings that are easy to see in any lighting

• Flashing alarm alerts you when temperature or voltage goes out of range so you can take action early

• Works with both 12V and 24V systems for broad compatibility across different vehicles

• Low power consumption design keeps the gauge running without draining your battery

• Anti-vibration and anti-bump construction ensures stable performance even on rough roads

Who Is This For

- Car owners who want a simple way to monitor engine temperature and battery health

• Truck and SUV drivers with 24V electrical systems who need a gauge that matches their setup

• Motorcycle enthusiasts looking for a compact dual-function gauge to add to their dash

• DIY mechanics who prefer easy-to-install accessories with clear wiring instructions

Usage Scenario

Mike drives a 2005 pickup truck that he uses for weekend camping trips. After his old temperature gauge stopped working, he installed this 2-in-1 meter in about 20 minutes. During a long uphill climb on a hot summer day, he noticed the temperature reading rising and the alarm flashing. He pulled over, let the engine cool down, and found a small coolant leak he would have missed otherwise. The early warning saved him from an overheated engine and a tow truck bill.

Micro Comparison

Unlike single-function gauges that only show temperature or voltage, this 2-in-1 unit gives you both readings from one display. It saves dashboard space and reduces wiring complexity. The built-in flashing alarm adds an extra layer of safety that basic gauges often lack, making it a practical upgrade for anyone who wants more visibility into their vehicle's condition.

Specifications

Material: Plastic Shell

Temperature sensor screw diameter: 10 mm / 0.39 in

Temperature sensor thread: M10

Power supply: DC 9V - 36V

Cable length: approx. 300 cm / 118.1 in

Display digits: 3

Item dimensions: 100 x 14 x 55 mm / 3.9 x 0.6 x 2.2 in

Item weight: 156 g / 5.5 oz

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1x Water temperature gauge

• 1x Water temperature sensor

Why You Will Love It

Having both temperature and voltage data in one gauge means less clutter and more information at a glance. The alarm feature gives you peace of mind that you will know about problems early. It is a practical, affordable upgrade that helps you keep your vehicle running reliably mile after mile.

Questions and Answers

Question: What vehicles is this gauge compatible with?

Answer: It works with any 12V or 24V vehicle, including cars, trucks, SUVs, vans, and motorcycles.

Question: How do I install the temperature sensor?

Answer: Screw the M10 sensor into a suitable port in your engine's cooling system, then connect the wires to the gauge.

Question: Does the display show both readings at the same time?

Answer: Yes, the LCD screen shows both water temperature and voltage simultaneously.

Question: What does the flashing alarm mean?

Answer: The display flashes when temperature or voltage goes outside the normal operating range to alert you of a potential issue.

Question: How long is the cable between the gauge and the sensor?

Answer: The cable is approximately 300 cm or 118 inches long, giving you flexibility in placement.

Drive with confidence using this GPS speedometer that displays your speed clearly on a green backlit screen. It works with all cars, trucks, buses, and even bicycles for a safer driving experience.

This head up display uses GPS and BEIDOU satellite signals to show your speed directly on the windshield. The green backlight is easy on the eyes day or night, and the device works with both 12V and 24V vehicles. It is a plug and play unit that starts working as soon as you connect it to power.

The speed data comes from satellites, so the reading is accurate and smooth without skipping. You can install it in any vehicle without complicated wiring or setup. It helps you keep your eyes on the road while still knowing your exact speed at all times.

Whether you drive a car, a truck, or ride a scooter, this digital speedometer gives you a clear view of your speed. The green display is bright enough to read in sunlight but not distracting at night.

Key Features and Benefits

- Plug and play design that works immediately after connecting to power for a hassle-free installation

• Built-in GPS and BEIDOU chip for accurate speed collection from satellites without skipping

• Green backlight display that is easy to read in any lighting condition for safer driving

• Compatible with 12V and 24V electrical systems for use in cars, trucks, buses, and scooters

• No skip speed technology for a smooth and coherent display of your current speed

Who Is This For

- Drivers who want a clear heads up display of their speed without looking down at the dashboard

• Truck and bus drivers who need a reliable speedometer that works with 24V systems

• Scooter and bicycle riders who want a GPS based speed display without mechanical connections

• Car owners looking for an easy to install digital speedometer with no complicated setup

Usage Scenario

Mark drives a delivery truck and often needs to check his speed quickly while navigating city streets. He plugs this GPS speedometer into the 24V power port and places it on the dashboard. The green backlight shows his speed clearly even in bright sunlight. Now he can keep his eyes on traffic and still know exactly how fast he is going. No more glancing down at the dashboard speedometer that is partially blocked by the steering wheel.

Micro Comparison

Unlike mechanical speedometers that can wear out or require calibration, this GPS based unit gets speed data directly from satellites. It works in any vehicle regardless of age or model. The plug and play design means you do not need tools or professional installation. Other GPS speedometers may have complicated menus or dim displays, but this one offers a clear green backlight that is easy to read in all conditions.

Specifications

Power Supply: 12V / 24V

Display: Green backlight

Chipset: GPS + BEIDOU

Display Type: Speed in km/h

Package Includes

- 1 x Head Up Display

Why You Will Love It

You will feel more in control when you can see your speed without taking your eyes off the road. The green backlight adds a modern look to your dashboard while keeping the display clear and readable. It is a simple upgrade that makes every drive safer and more convenient.

Questions and Answers

Question: Does this speedometer work with diesel trucks?

Answer: Yes, it works with both 12V and 24V systems, including diesel trucks and buses.

Question: Can I use this on a motorcycle?

Answer: Yes, it works on motorcycles, scooters, and bicycles as long as you have a power source and a clear view of the sky for the GPS signal.

Question: Do I need to install any software or app?

Answer: No, it is plug and play. Just connect it to power and it starts working immediately.

Question: Why does the speed not show when I am inside a parking garage?

Answer: This device gets speed from satellites, so it needs a clear view of the sky. It will not show speed indoors or in areas with no GPS signal.

Question: Is the display bright enough for daytime driving?

Answer: Yes, the green backlight is designed to be bright and clear even in direct sunlight.

Keep your vehicle's electrical system in check with the AD Universal 52mm Voltmeter. This waterproof gauge monitors battery voltage from 8 to 16 volts, giving you a clear reading at a glance. It is built for durability and visibility, making it a practical addition to your dashboard.

This voltmeter is designed to fit a wide range of vehicles including motorcycles, cars, trucks, and boats. The bright red backlight ensures you can read the display easily, even in low-light conditions. With an IP67 waterproof rating, it is built to withstand splashes and rain, so you can rely on it in various weather conditions.

The gauge features a racing-inspired look that adds a sporty touch to your vehicle's interior or instrument panel. It comes with an installation manual and a multi-plug socket to simplify the setup process. Whether you are monitoring a diesel generator or a gasoline engine, this universal voltmeter helps you stay informed about your battery's health.

Installation is straightforward with the included components. The 52mm diameter fits standard gauge pods and panels. Once installed, you get real-time voltage readings that help you spot potential electrical issues before they become problems.

Key Features and Benefits

- High precision measurement that delivers accurate voltage readings for your battery

• IP67 waterproof construction that protects the gauge from water and dust

• Bright red backlight that makes the display easy to read in daylight or at night

• Universal 52mm fitment that works with motorcycles, cars, trucks, boats, and engines

• Racing-inspired design that enhances the look of your dashboard or panel

Who Is This For

- Motorcycle riders who want to monitor battery voltage on long trips

• Car owners looking for an affordable and reliable dashboard voltmeter

• Boat operators who need a waterproof gauge for marine environments

• DIY mechanics working on diesel generators or gasoline engines

Usage Scenario

Mike noticed his car battery was draining faster than usual. He installed this 52mm voltmeter on his dashboard and quickly saw the voltage drop below 12 volts while the engine was off. The red backlight made it easy to read at night. He replaced the battery before getting stranded, saving time and hassle.

Micro Comparison

Unlike basic voltmeters that lack waterproofing, this gauge has an IP67 rating for wet conditions. The bright red backlight also gives you better visibility compared to standard white or green displays. It offers a universal fit that works across multiple vehicle types, so you do not need separate gauges for different applications.

Specifications

Material: Plastic Shell

Item Height: 52 mm / 2.0 in

Item Width: 52 mm / 2.0 in

Item Length: 52 mm / 2.0 in

Item Weight: 300 g / 10.6 oz

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1x Voltmeter

• 1x Multi-plug socket

• 1x Installation Instruction

Why You Will Love It

You get a durable, waterproof voltmeter that fits almost any vehicle. The red backlight makes night driving easier, and the simple installation means you can set it up yourself. It gives you peace of mind by keeping an eye on your battery voltage.

Questions and Answers

Question: Will this voltmeter work on a 12V motorcycle battery?

Answer: Yes, it works on 8-16V systems including 12V motorcycle batteries.

Question: Is the gauge completely waterproof?

Answer: It has an IP67 rating, meaning it is protected against water immersion up to 1 meter for 30 minutes.

Question: What size hole do I need to mount this gauge?

Answer: You need a 52 mm diameter hole for a standard fit.

Question: Does it come with wiring instructions?

Answer: Yes, the package includes an installation manual to guide you through the wiring.

Question: Can I use this on a boat?

Answer: Yes, it is suitable for marine use thanks to its waterproof design.

This front collision radar sensor is designed as a direct replacement part for specific Volkswagen models. It supports the vehicle's adaptive cruise control and forward collision warning systems for improved driving safety and convenience.

The part number 3QF 907 561H G D ensures compatibility with the Tiguan and Passat B8 platforms. This component is essential for maintaining the function of your car's advanced driver-assistance systems, helping to monitor the road ahead.

This listing serves as a special link for replacement products. It is intended for customers who have been directed here to complete an order for the exact item shown, ensuring you receive the correct component for your vehicle.

Key Features and Benefits

- Direct replacement part that restores factory-level adaptive cruise control functionality

• Specifically designed for VW Tiguan and Passat B8 models for guaranteed fitment

• Supports front collision radar detection that helps enhance driver awareness

• Engineered to meet OEM specifications for reliable performance and durability

Who Is This For

- VW Tiguan or Passat B8 owners needing to replace a faulty or damaged front radar sensor

• Mechanics and auto repair shops sourcing the correct OEM replacement part

• Car owners looking to restore full functionality of their adaptive cruise control system

Usage Scenario

Mark noticed his Passat B8's adaptive cruise control stopped working after a minor front-end impact. After a diagnostic check, the mechanic identified the front collision radar as the issue. Mark ordered this specific replacement part to get his system back online, ensuring his daily highway commute remained safe and convenient.

Micro Comparison

While generic radar sensors may claim compatibility, this part is identified by the specific OEM number 3QF 907 561H G D, ensuring it matches the exact specifications of your VW. Choosing a part with the correct part number eliminates guesswork and reduces the risk of installation errors or system malfunctions.

Specifications

- Part Number: 3QF 907 561H G D

• Compatible Models: Volkswagen Tiguan, Passat B8

• Function: Adaptive Cruise Control, Front Collision Radar

Package Includes

- 1 x Front Collision Radar Sensor (3QF 907 561H G D)

Why You Will Love It

This radar sensor is the exact component your VW needs to keep its smart safety systems working as intended. It provides peace of mind by restoring a key feature that makes long drives less tiring and city traffic less stressful.

Questions and Answers

Question: Will this part work on my 2017 VW Tiguan?

Answer: This sensor is designed for the Tiguan and Passat B8 platforms. Please verify your vehicle's compatibility with the part number 3QF 907 561H G D before purchasing.

Question: Does this include the mounting bracket?

Answer: The package includes the radar sensor unit only. You may need to reuse your existing bracket or mounting hardware.

Question: Is this an OEM part?

Answer: This is a replacement part designed to meet OEM specifications for the 3QF 907 561H G D application.

Question: Do I need to calibrate the sensor after installation?

Answer: Yes, most modern vehicles require a professional calibration of the radar sensor after installation to ensure the adaptive cruise control functions correctly.

Question: What should I do if my car's system still shows an error?

Answer: First, ensure the sensor is properly connected and mounted. If the error persists, the system may need a diagnostic scan and calibration performed by a qualified technician.

Fine-tune your car's front-to-rear brake pressure with this lever-type adjustable brake proportion valve. Designed for motorsport use, it gives you direct control over brake bias to improve turning stability and overall braking performance on the track.

This brake bias valve allows you to adjust the rear brake pressure from 0% to 60% reduction. By placing the valve in line to the rear brakes, you can shift more braking force to the front wheels. This helps prevent rear wheel lockup under hard braking, making your car more stable and easier to control during corner entry.

Built from billet aluminum, the valve is both lightweight and durable. It handles a pressure range of 150 PSI to 1200 PSI, making it suitable for race cars, drift cars, rally cars, and track day vehicles. The inlet and outlet ports use a standard 1/8 NPT thread for easy integration into existing brake lines.

This valve is used by professional race drivers and teams in series like Pro-Drift, BDC, BTCC, and 750 MC. It is a reliable tool for anyone looking to gain more control over their braking system without needing a complex dual master cylinder setup.

Key Features and Benefits

- Lever-type adjustable design that lets you change brake bias quickly and precisely during a race or practice session

• 0% to 60% pressure reduction range that helps prevent rear wheel lockup and improves corner entry stability

• Billet aluminum construction that offers strength and corrosion resistance without adding unnecessary weight

• 150 PSI to 1200 PSI pressure range that suits high-performance braking systems used in motorsport

• 1/8 NPT inlet and outlet ports that make installation straightforward with standard brake line fittings

Who Is This For

- Track day drivers who want to fine-tune their car's handling and braking balance for faster lap times

• Drift and rally competitors who need precise rear brake control to initiate and hold slides

• Amateur and professional race teams looking for a reliable, race-proven brake bias solution

• Builders of single master cylinder race cars who want adjustable rear brake pressure without upgrading to a dual system

Usage Scenario

Mark was struggling with rear wheel lockup entering tight corners during his local track day. After installing this adjustable brake proportion valve, he dialed in a 40% rear pressure reduction. The car became much more stable under hard braking, and he could carry more speed into corners without fighting the rear end. His lap times dropped by over a second on his first outing with the valve.

Micro Comparison

Unlike fixed proportioning valves that offer a single pressure split, this lever-type valve lets you adjust bias on the fly. It is a simpler and more affordable alternative to a dual master cylinder setup, giving you real-time control without the complexity of a full pedal box. For single master cylinder cars, it is one of the most effective upgrades for improving brake feel and corner entry control.

Specifications

- Material: Billet aluminum

• Pressure Range: 150 PSI - 1200 PSI

• Reduction Range: 0% - 60%

• Port Thread: 1/8 NPT

• Application: All race cars, drifting, rally, and track day cars

Package Includes

- 1x Brake Proportion Valve (Lever Type)

Why You Will Love It

You get professional-grade brake control without the cost or complexity of a full dual master cylinder system. The lever adjustment is intuitive, so you can make changes between sessions or even during a run. It is a proven component used by top race teams, giving you confidence that your braking setup is track-ready.

Questions and Answers

Question: Does this valve work with any brake fluid?

Answer: Yes, it is compatible with standard DOT 3, DOT 4, and DOT 5.1 brake fluids used in most performance and race cars.

Question: Can I install this myself?

Answer: Professional installation is highly recommended. This component is part of your brake system, and incorrect installation can affect braking performance.

Question: Will this fit my car?

Answer: It fits any car with a single master cylinder and 1/8 NPT brake line fittings. It is designed for motorsport use, not for daily drivers with stock braking systems.

Question: How do I adjust the brake bias?

Answer: Turn the lever to increase or decrease the pressure going to the rear brakes. Turning it one way reduces rear pressure, the other way increases it.

Question: Does this come with mounting hardware?

Answer: It includes the valve only. You will need your own brake line fittings and mounting hardware for installation.

Long drives shouldn't mean neck pain. This adjustable car headrest pillow combines memory foam filling with a waterproof PVC leather cover to give your head and neck the support they need — whether you're on a road trip or a daily commute.

• Memory foam filling — molds to your head shape for personalized, pressure-relieving support
• Waterproof PVC leather cover — easy to wipe clean, durable, and resistant to spills
• Adjustable design — fits most car headrest posts with included hook attachment
• Generous size — 33 x 29 x 4cm, suitable for both adults and children
• Synthetic fiber + ABS frame — sturdy structure that holds its shape over time
• 3 options — Beige with Hook, Black with Hook, or Cloth Black with Hook

A simple upgrade that makes every seat more comfortable on long-distance journeys.

Drive with confidence using an adjustable car phone mount that keeps your phone secure and visible. This ABS dashboard cradle features a strong suction base and 360° swivel design for easy navigation access. The anti-shake and anti-slip construction helps reduce phone movement during sudden stops or rough roads, making every trip safer and more convenient.

This car phone mount is built from durable ABS material for long-lasting use. The strong suction base sticks firmly to your dashboard, providing a stable hold for your device. With its adjustable, foldable, and rotatable features, you can position your phone at the perfect angle for GPS, calls, or music without taking your eyes off the road for long.

One-handed operation makes it easy to insert or remove your phone while driving. The protective layer on the reflective surface should be removed before first use for best performance. Whether you commute daily or take long road trips, this mount gives you a reliable hands-free experience without complicated setup.

The anti-shake design keeps your phone steady even on bumpy roads, while the anti-slip grip ensures your device stays in place. This mount works with most phones and fits flush on your dashboard, so you can focus on driving while staying connected.

Key Features and Benefits

- Strong suction base that sticks securely to your dashboard for a stable phone hold

• 360° swivel head that lets you rotate your phone to portrait or landscape for easy viewing

• Adjustable, foldable, and rotatable arms that fit different phone sizes and angles

• Anti-shake and anti-slip design that reduces vibration and prevents your phone from sliding

• One-handed operation that allows quick phone insertion and removal while driving

• Durable ABS material that resists wear and keeps the mount functional over time

Who Is This For

- Daily commuters who need a reliable hands-free phone mount for navigation and calls

• Rideshare drivers who want a sturdy cradle that keeps their phone visible and secure

• Road trip enthusiasts who drive long distances and need a stable phone holder for GPS

• Anyone who wants a simple, no-fuss dashboard mount that works with most smartphones

Usage Scenario

Sarah drives 45 minutes to work each day through city traffic. She used to hold her phone in one hand to check GPS directions, which felt unsafe and awkward. After installing this adjustable car phone mount on her dashboard, she simply clicks her phone into the cradle with one hand. The 360° swivel lets her tilt the screen toward her for quick glances at the map. Even on bumpy streets, the anti-shake design keeps her phone steady. Now she keeps both hands on the wheel and arrives at work less stressed.

Micro Comparison

Many dashboard mounts use weak adhesive pads that lose grip over time or fail on rough roads. This mount uses a strong suction base that holds firmly to your dashboard, reducing the chance of your phone falling off. The adjustable arms and 360° swivel give you more positioning flexibility than fixed-angle cradles, so you can find the perfect viewing angle without compromise.

Specifications

- Material: ABS

• Installation Type: Wall-mounted (dashboard)

• Special Features: Adjustable, Foldable, Rotatable, One-handed operation

• Battery: Without battery

• Charger: No

Package Includes

- 1 x Adjustable Car Phone Mount

Why You Will Love It

You will love how this mount stays put on your dashboard, giving you one less thing to worry about while driving. The easy one-handed operation means you can grab your phone quickly when you arrive, and the 360° swivel lets you adjust the screen without struggling. It is a simple upgrade that makes every drive feel more organized and safer.

Questions and Answers

Question: Does this mount work with a phone case?

Answer: Yes, the adjustable arms can hold phones with most standard cases. Thick or heavy-duty cases may require checking the arm width first.

Question: How do I clean the suction cup for better grip?

Answer: Wipe the suction cup with a damp cloth and dry it before attaching to the dashboard. Dust or grease can reduce adhesion.

Question: Can I use this mount on a textured dashboard?

Answer: The suction cup works best on smooth, flat surfaces. Textured or porous dashboards may not provide a strong enough hold.

Question: Is the mount easy to remove and reinstall?

Answer: Yes, you can peel it off and reposition it. Clean the surface before reattaching for best suction.

Question: What phone sizes does this mount fit?

Answer: The adjustable arms fit most smartphones from 4 to 6.5 inches. Check the arm opening range for exact fit.

Keep your drinks within easy reach while driving. This adjustable car vent cup holder uses a sponge base to hold bottles and cans securely, so you can focus on the road without worrying about spills.

This drink holder is designed for simple installation. It fits directly into your car's air vent, giving you a handy spot for water bottles, soda cans, or coffee cups without taking up space in the center console or cup holders.

The adjustable design means it can hold different sizes of drinks. Whether you have a slim water bottle or a standard soda can, the holder adapts to keep it stable. The sponge base adds extra grip to prevent sliding and tipping, even when you take sharp turns or drive on bumpy roads.

Made for everyday convenience, this car cup holder is a practical upgrade for any vehicle. It helps reduce clutter and keeps your beverages accessible, making your drive more comfortable and organized.

Key Features and Benefits

- Adjustable design that fits various bottle and can sizes for versatile use

• Sponge base that provides a secure grip to prevent spills and sliding

• Easy installation that clips directly into your car vent without tools

• Compact shape that keeps drinks off your seats and center console

• Sturdy construction that holds drinks steady during driving

Who Is This For

- Drivers who need extra cup holders in their car

• Commuters who carry drinks during daily travel

• Passengers who want a convenient spot for their beverages

• Anyone with a car that lacks enough built-in cup holders

Usage Scenario

Sarah drives to work every day and always stops for coffee. Her car only has two cup holders, and they are usually taken up by her phone and sunglasses. She clips this adjustable vent cup holder into the passenger side vent. Now she can keep her coffee secure without it spilling on the morning commute, and she still has space for her other items.

Micro Comparison

Many car cup holders sit on the seat or in the center console, which can take up valuable space. This vent-mounted design keeps your drinks off the seats and out of the way. The adjustable fit and sponge grip also provide better stability than basic cup holders that do not adapt to different bottle sizes.

Package Includes

- 1 x Adjustable Car Vent Cup Holder

Why You Will Love It

You will love how easy it is to keep your drinks secure and within reach while driving. This holder helps reduce mess and clutter, so you can enjoy a smoother, more organized ride every day.

Questions and Answers

Question: Will this cup holder fit all car vents?

Answer: It is designed to fit most standard car air vents, but we recommend checking the size of your vent slats before purchase.

Question: Can it hold a large water bottle?

Answer: Yes, the adjustable design allows it to hold different sizes, including larger bottles, as long as they fit within the holder's range.

Question: Is the installation difficult?

Answer: No, installation is simple. You just clip the holder onto your car vent slats without needing any tools.

Question: Will the sponge base damage my vent?

Answer: The sponge base is soft and designed to grip without scratching or damaging your vent slats.

Question: Can I use this holder for hot drinks?

Answer: Yes, it can hold hot drinks like coffee or tea, but make sure the cup has a secure lid to avoid spills.

Keep your drinks and small items secure while driving with this adjustable cup holder insert divider. Designed specifically for Subaru Legacy, Forester, and Outback models from 2010 to 2018, this accessory fits neatly into your existing center console cup holder to stop bottles and cans from tipping over on sharp turns.

This simple but practical upgrade makes your car interior more organized and convenient. The divider adjusts to hold different sizes of cups, coffee mugs, and water bottles, so your beverages stay upright and within easy reach. It installs in seconds without any tools or modifications to your vehicle.

Made from durable plastic, this cup holder insert matches the look of your Subaru's interior. It keeps your center console clean and clutter-free, giving you a more comfortable driving experience every day.

Key Features and Benefits

- Adjustable divider that secures various cup and drink sizes for a stable hold

• Easy to install with no tools required, saving you time and effort

• Matches your Subaru interior perfectly for a seamless factory-like look

• Prevents spills by keeping drinks upright, protecting your car's interior

• Lightweight and compact design at only 24g for minimal added weight

Who Is This For

- Subaru Legacy, Forester, or Outback owners from 2010-2018 who want a tidier cup holder

• Daily commuters who carry coffee or water bottles and want to avoid spills

• Long-distance drivers who need a secure spot for drinks on rough roads

• Anyone looking for a low-cost interior upgrade that adds convenience

Usage Scenario

Sarah drives her 2014 Subaru Forester to work every day. Her morning coffee always slid around in the wide cup holder, often spilling onto the center console. After installing this adjustable divider, her travel mug stays firmly in place even through sharp turns and bumpy roads. Now she can enjoy her coffee without worrying about cleaning up a mess.

Micro Comparison

Many universal cup holder inserts do not fit Subaru models properly and can slide around. This divider is designed specifically for Legacy, Forester, and Outback vehicles from 2010 to 2018, so it fits securely without wobbling. The adjustable feature also lets you switch between different drink sizes, offering more flexibility than fixed-size options.

Specifications

- Material: Plastic

• Color: As Picture

• Item Weight: 24g

• Installation Type: Cup holder installation

• Item Type: Drinks holders

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x Beverage Cup Holder

Why You Will Love It

This simple insert solves a daily annoyance and makes your drive more pleasant. It keeps your drinks secure, your console clean, and your mind focused on the road. A small change that makes a big difference in your Subaru.

Questions and Answers

Question: Will this fit my 2012 Subaru Outback?

Answer: Yes, this cup holder insert is designed to fit Subaru Legacy, Forester, and Outback models from 2010 to 2018, including the 2012 Outback.

Question: How does the divider adjust?

Answer: The divider moves side to side so you can secure different sizes of cups, bottles, or cans.

Question: Do I need any tools to install this?

Answer: No tools are required. Simply place the insert into your existing cup holder and adjust the divider as needed.

Question: Is the plastic durable?

Answer: Yes, the insert is made from sturdy plastic that holds up well to daily use.

Question: Will it hold a large water bottle?

Answer: The adjustable divider allows you to fit a range of drink sizes, including larger water bottles, by sliding it to the right position.

Keep your phone within easy reach while driving or riding with this adjustable cup holder phone mount. Designed to fit most standard cup holders, it provides a stable and accessible spot for your device in cars, trucks, and golf carts.

This universal phone accessory features a foldable and rotatable design, letting you adjust the viewing angle for navigation, calls, or music. The secure cup holder installation means you can place it in the center console without taking up extra dashboard space.

Made from durable ABS material, this mount is built to handle bumps and rough roads. Whether you are commuting to work or cruising the golf course, it keeps your phone steady and within sight.

Setting up is quick and tool-free. Simply place the base into your cup holder, adjust the arms to hold your phone, and rotate the head to your preferred angle. It folds flat when not in use for easy storage.

Key Features and Benefits

- Adjustable design that fits various phone sizes for a custom secure hold

• Foldable construction that collapses for compact storage when not in use

• Rotatable head that lets you switch between portrait and landscape viewing

• Cup holder installation that works in cars, trucks, and golf carts without tools

• ABS material that provides durability and long-lasting use on rough terrain

Who Is This For

- Drivers who want a clutter-free dashboard and need a secure phone holder

• Golf cart users who need hands-free access to their phone while on the course

• Truck drivers who want a stable mount that fits in large or deep cup holders

• Anyone who needs a temporary phone mount that can be removed quickly

Usage Scenario

Mark spends his weekends on the golf course and his weekdays commuting to the office. He was tired of his phone sliding around the cup holder during sharp turns. With this adjustable mount, he simply drops it into the cup holder, secures his phone, and rotates the screen to see his GPS. On the course, he uses it to play music and check messages without reaching into his pocket.

Micro Comparison

Dashboard mounts often require adhesive pads that leave residue or lose grip over time. Vent clips can block airflow or fall off on bumpy roads. This cup holder mount uses a stable base that fits into your existing cup holder, providing a secure hold without damaging your car's interior. It works across multiple vehicle types, from sedans to golf carts.

Specifications

- Material: Acrylonitrile Butadiene Styrene (ABS)

• Installation Type: Cup holder installation

• Special Features: Adjustable, Foldable, Rotatable

Package Includes

- 1 x Cup Holder Phone Mount

Why You Will Love It

You will love how easily this mount adapts to your day. It fits into your routine without any setup fuss, whether you are driving to work or riding a golf cart. The foldable design means you can tuck it away when you do not need it, keeping your car clean and organized.

Questions and Answers

Question: Will this mount fit in a deep cup holder?

Answer: Yes, the base is designed to sit securely in most standard and deep cup holders found in cars, trucks, and golf carts.

Question: Can I rotate my phone to landscape mode?

Answer: Yes, the mount head is rotatable so you can switch between portrait and landscape viewing angles.

Question: Does this mount require any tools to install?

Answer: No tools are needed. Simply place the base into your cup holder and adjust the arms to hold your phone.

Question: What phone sizes does this mount support?

Answer: The adjustable arms can hold most standard smartphones, including larger models with cases.

Question: Will this mount fit in a golf cart cup holder?

Answer: Yes, it is designed to fit standard golf cart cup holders for easy phone access on the course.

This adjustable foam cannon is designed to work with Karcher K2, K3, K4, K5, K6, and K7 pressure washers. It creates thick, fluffy snow foam that clings to your car's surface, lifting dirt and grime for a safer, touchless wash. The 750ml bottle is made from durable PA material, and the kit includes all the adaptors you need for a secure fit.

This foam lance kit turns your pressure washer into a professional-grade cleaning tool. By applying a thick layer of foam, the soap has time to break down road film, bugs, and bird droppings before you even touch the paint. This reduces the risk of swirl marks and scratches, keeping your car's finish looking its best.

The kit features two adjustment knobs. One controls the foam mixture, allowing you to dial in the perfect ratio of soap to water for thick, clinging suds. The other knob adjusts the spray pattern, letting you switch from a wide, gentle fan for the body to a more concentrated stream for wheels and tires. The bottle also has measurement guide lines, making it easy to mix the right amount of soap every time.

With a solid brass construction and chemical-resistant nylon adaptors, this foam cannon is built to last. It supports a pressure range of 100 bar to 200 bar (1400 psi to 3000 psi) and can handle water temperatures up to 60°C. The kit comes with a 1-year warranty, giving you confidence in its durability.

Key Features and Benefits

- Adjustable foam knob that lets you control the soap-to-water ratio for thick, long-lasting foam.

• Adjustable spray nozzle that allows you to change the spray pattern from a wide fan to a narrow jet.

• 750ml large capacity bottle that holds enough soap solution for a full car wash without refilling.

• Durable PA bottle and engineering plastic adaptors that resist chemicals and last for years.

• Solid brass and nylon construction that provides reliable performance and corrosion resistance.

• Measurement guide lines on the bottle that help you mix the correct soap and water ratio easily.

Who Is This For

- Car owners who want to wash their vehicle at home with professional-grade foam.

• Detailing enthusiasts who need a reliable foam cannon for touchless pre-wash and snow foam.

• Anyone with a Karcher K2, K3, K4, K5, K6, or K7 pressure washer looking for a compatible upgrade.

• People who want to save time and water by using a thick foam that cleans more effectively.

Usage Scenario

After a long drive on a dusty highway, your car is covered in a layer of grime and bug splatters. Mixing a high-quality car shampoo with warm water in this 750ml foam cannon, you attach it to your Karcher K5. With a twist of the adjustment knob, you dial in a thick foam mixture. As you spray the car from top to bottom, a rich, white snow foam clings to the paint, slowly dissolving the dirt and bugs. After letting it dwell for a few minutes, you rinse it off with the pressure washer, revealing a clean surface with no scratches or swirl marks.

Micro Comparison

Unlike basic foam sprayers that produce a thin, watery soap, this foam cannon creates a thick, creamy foam that stays on vertical surfaces. The dual adjustment knobs give you precise control over both the foam density and the spray pattern, which is not always available with standard nozzles. This kit is purpose-built for Karcher K-series washers, ensuring a perfect fit and optimal performance without the need for additional adaptors.

Specifications

Bottle Capacity: 750ml

Pressure Range: 100 bar - 200 bar (1400 psi - 3000 psi)

Durability: 10 Years

Warranty: 1 Year (excluding mesh filter)

Construction Material: Solid Brass, Resistant Nylon, PA bottle

Maximum Water Temperature: 60°C

Max Pressure of Sprayer Nozzle: 15 MPA

Chemical Resistant: Yes

Foam Consumption Adjustable: Yes

Spray Width Adjustable: Yes

Package Includes

- 1 x Foam lance unit

• 1 x 750ml PA bottle

• 1 x Set of adaptors for Karcher K2-K7

Why You Will Love It

You will love the satisfying layer of thick foam that makes washing your car feel like a professional detail. The easy-to-use adjustment knobs give you complete control, so you can customize every wash to your car's needs. It is a simple upgrade that saves you time, water, and effort while protecting your paint.

Questions and Answers

Question: Will this foam cannon fit my Karcher K4 pressure washer?

Answer: Yes, this foam cannon is designed to fit Karcher K2, K3, K4, K5, K6, and K7 models. It comes with the necessary adaptors.

Question: How do I adjust the foam thickness?

Answer: Turn the dial on the top of the foam cannon to control the mixture. Turning it one way makes the foam thicker, and the other way makes it thinner.

Question: What is the bottle made of?

Answer: The bottle is made of strong PA (polyamide) material, which is durable and resistant to chemicals.

Question: Can I use this with hot water?

Answer: Yes, the maximum water temperature is 60°C. Using warm water can help create more foam.

Question: What is the warranty period?

Answer: The foam cannon comes with a 1-year warranty. The mesh filter inside is not covered by the warranty.

Keep your windshield clear and your drive safe with these upgraded hybrid wiper blades, designed specifically for the Land Rover Discovery 3 and 4 models from 2004 to 2016. They provide a clean, streak-free wipe in rain, snow, and mud, making them a reliable replacement for your worn-out factory wipers.

These wiper blades feature a dual-rubber design that enhances cleaning performance. The hybrid construction combines the durability of a beam blade with the aerodynamic pressure of a traditional frame, ensuring consistent contact with your curved windshield. They are a direct retrofit upgrade for your original wiper arms.

Installation is straightforward thanks to the 9X3 hook arm type, which fits the standard wiper arm found on left-hand and right-hand drive Discovery models. The durable rubber material is built to withstand harsh weather conditions, providing long-lasting performance and helping you maintain excellent visibility on every journey.

Key Features and Benefits

- Hybrid design that offers the stability of a beam blade and the pressure distribution of a frame wiper for a consistent, clean wipe.

• Dual rubber construction that improves cleaning efficiency and helps remove dirt, water, and debris from your windshield.

• Retrofit flat blade upgrade that directly replaces your old wipers without needing to change the wiper arm.

• 9X3 hook connector that ensures a simple and secure fit on your Land Rover Discovery.

• Durable rubber material that resists cracking and wear from sun, rain, and temperature changes.

Who Is This For

- Land Rover Discovery 3 and 4 owners looking for a direct replacement front wiper blade set.

• Drivers who need a reliable all-weather wiper that performs well in rain, snow, and slush.

• Car owners wanting an upgrade from traditional frame-style wipers to a more modern, quieter hybrid blade.

• Anyone replacing old, streaky wipers to improve visibility and safety during their daily commute or off-road trips.

Usage Scenario

Mark was driving his Discovery 4 home through a heavy evening downpour. His old wipers left streaks that made it hard to see the road ahead. After switching to these hybrid wiper blades, the first wipe cleared the windshield completely. The dual rubber edges swept away the rain without any skipping or noise, giving him a clear view and a much safer drive home.

Micro Comparison

Unlike standard frame wipers that can lift at high speeds or leave uneven pressure on your windshield, these hybrid blades use a beam-style spine to maintain constant contact. The dual rubber layer also provides an extra cleaning edge compared to single-rubber wipers, helping to remove more stubborn dirt and water in a single pass.

Specifications

- Material: Rubber

• Arm Type: 9 X 3 Hook

• Placement: Front Windshield

• Wiper Type: Hybrid / Beam / Retrofit Flat Wiper Blade Upgrade

• Special Features: Dual Rubber

Package Includes

- 1 Pair of Front Wiper Blades

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Why You Will Love It

You will appreciate the quiet, streak-free performance every time it rains. This simple upgrade restores your confidence behind the wheel, knowing your windshield will stay clear no matter the weather. It is a small change that makes a big difference to your daily driving experience.

Questions and Answers

Question: Will these wiper blades fit my 2005 Land Rover Discovery 3?

Answer: Yes, these wiper blades are designed to fit the Land Rover Discovery 3 from 2004 to 2009, including the 2005 model.

Question: What type of wiper arm connector do I need?

Answer: These blades use a 9X3 hook connector, which is the standard arm type for these Discovery models.

Question: Are these wipers suitable for both left-hand and right-hand drive vehicles?

Answer: Yes, they are designed to work on both left-hand and right-hand drive models.

Question: Do these wipers come as a pair or a single blade?

Answer: The package includes a pair of front wiper blades.

Question: How do these hybrid wipers compare to traditional frame wipers?

Answer: Hybrid wipers offer better aerodynamics and more even pressure on the windshield, which typically results in a quieter and more consistent wipe compared to traditional frame wipers.

Restore your engine's firing power with a set of premium dual iridium spark plugs designed for Toyota and Lexus vehicles. This 4-piece lot covers multiple OEM part numbers including 90919-01210 SK20R11, 90919-01233 SK16HR11, 90919-01240 SK16R11, 90919-01249 FK20HBR11, 90919-01253 SC20HR11, and 90919-01275 SC16HR11. Choose the right model for your car and enjoy a smoother, more efficient drive.

Each spark plug in this set uses dual iridium electrodes for consistent, powerful ignition. Iridium is a hard-wearing material that resists wear far longer than standard copper or nickel alloys. That means you get reliable starts, stable idling, and fewer misfires over the life of the plug. The medium calorific value suits everyday driving conditions, balancing heat range for both city commutes and highway cruising.

Installation is straightforward thanks to the dwarf flat mounting base and standard spanner sizes. Whether you are a DIY mechanic or a professional technician, these plugs are built to drop right into compatible Toyota and Lexus engines. The set includes four plugs, which is exactly what most four-cylinder engines need for a full tune-up.

Upgrading to iridium spark plugs is one of the simplest ways to improve fuel efficiency and throttle response. This set gives you a direct replacement for several factory part numbers, so you can match the exact spec your vehicle requires. Get your engine back to peak performance without overcomplicating the job.

Key Features and Benefits

- Dual iridium electrodes that deliver a strong, consistent spark for better combustion and smoother acceleration

• Medium calorific value that works well for daily driving, reducing the risk of pre-ignition or fouling

• Dwarf flat mounting base that fits a wide range of Toyota and Lexus engines without modification

• Multiple compatible part numbers in one set, giving you the flexibility to choose the correct model for your car

• Set of four plugs that provides a complete replacement for standard four-cylinder engines

Who Is This For

- Toyota and Lexus owners looking for a direct OEM-style replacement spark plug set

• DIY home mechanics who want a reliable, long-lasting ignition upgrade without visiting a shop

• Drivers experiencing rough idling, hard starts, or reduced fuel economy who need a simple fix

• Anyone maintaining a compatible four-cylinder engine and wanting iridium durability over standard plugs

Usage Scenario

Mark noticed his Toyota Camry was starting slower than usual and the fuel economy had dropped by a couple of miles per gallon. He picked up this set of iridium spark plugs, matched the part number to his engine, and swapped out the old plugs in under an hour. After the change, the engine fired up instantly, the idle smoothed out, and his next tank of gas went noticeably further. A simple weekend job saved him a trip to the mechanic and restored his car's performance.

Micro Comparison

Standard copper spark plugs wear out faster and require more frequent replacement, often every 20,000 to 30,000 miles. This iridium set lasts significantly longer while providing a more consistent spark. Compared to basic nickel plugs, dual iridium electrodes resist erosion better, meaning you get reliable ignition for a longer period. This set gives you a durable upgrade that matches or exceeds the lifespan of many factory-installed plugs.

Specifications

Type: Iridium Spark Plug

Electrode Material: Dual Iridium

Calorific Value: Medium

Mounting Base: Dwarf Flat

Interchange Part Numbers: 90919-01210 SK20R11, 90919-01233 SK16HR11, 90919-01240 SK16R11, 90919-01249 FK20HBR11, 90919-01253 SC20HR11, 90919-01275 SC16HR11

Model 90919-01210 SK20R11: Thread Length 19 mm / 0.75 in, Outer Thread 14 mm / 0.55 in, Spanner Size 16 mm / 0.63 in

Model 90919-01233 SK16HR11: Thread Length 26.5 mm / 1.04 in, Outer Thread 14 mm / 0.55 in, Spanner Size 16 mm / 0.63 in

Model 90919-01240 SK16R11: Thread Length 26.5 mm / 1.04 in, Outer Thread 14 mm / 0.55 in, Spanner Size 16 mm / 0.63 in

Model 90919-01249 FK20HBR11: Thread Length 26.5 mm / 1.04 in, Outer Thread 14 mm / 0.55 in, Spanner Size 16 mm / 0.63 in

Model 90919-01253 SC20HR11: Thread Length 26.5 mm / 1.04 in, Outer Thread 12 mm / 0.47 in, Spanner Size 14 mm / 0.55 in

Model 90919-01275 SC16HR11: Thread Length 26.5 mm / 1.04 in, Outer Thread 12 mm / 0.47 in, Spanner Size 14 mm / 0.55 in

Package Includes

- 4 x Iridium Spark Plug (choose your model from the six available)

Why You Will Love It

You will love the confidence of knowing your engine is firing on premium iridium electrodes that last longer than standard plugs. This set gives you a direct, hassle-free upgrade that improves everyday drivability. It is a small investment that keeps your Toyota or Lexus running smoothly for thousands of miles.

Questions and Answers

Question: Will these spark plugs fit my 2010 Toyota Corolla?

Answer: They fit many Toyota and Lexus models. Check your engine's required part number against the six models listed to confirm compatibility.

Question: What is the difference between iridium and regular spark plugs?

Answer: Iridium plugs have a harder, more durable electrode that resists wear longer than copper or nickel plugs. They provide a more consistent spark and typically last longer between changes.

Question: Do I need to gap these plugs before installation?

Answer: Iridium plugs are usually pre-gapped from the factory. It is still a good practice to verify the gap with a tool, but most users install them as received.

Question: How many plugs come in this set?

Answer: The set includes four spark plugs, which is enough for a standard four-cylinder engine.

Question: Can I use these plugs in a Lexus ES350?

Answer: The ES350 may require a specific plug model. Compare your vehicle's OEM part number with the six options in this listing to find the correct match.

Upgrade your Tesla 2025 Model Y (Juniper) with a bright LED trunk light system that makes loading and unloading easier in any lighting condition. This set includes a front trunk LED strip and a rear trunk light with magnetic induction for convenient, hands-free operation.

The front trunk LED strip connects using the original vehicle's plug-and-play connector for a simple installation. The rear trunk light connects to the cigarette lighter socket and uses magnetic induction, so it turns on when you open the trunk and off when you close it. Both lights use a 12V power source and are designed to fit the 2025 Model Y perfectly.

This product is extremely easy to install. The front trunk light uses the original vehicle's plug-and-play connector, while the rear trunk light connects via the cigarette lighter socket. Both are compatible with the 2025 Model Y.

Key Features and Benefits

- Yellow and white LED strip that provides bright illumination for the front trunk, making it easier to see and access items.

• Rear magnetic induction light that automatically turns on when the trunk opens and turns off when closed, saving battery and adding convenience.

• Plug-and-play installation for the front trunk light that uses the original vehicle connector, so no cutting or splicing is required.

• Rear light connects to the cigarette lighter socket, providing a stable 12V power source without complicated wiring.

• Designed specifically for the 2025 Tesla Model Y (Juniper), ensuring a proper fit and reliable performance.

Who Is This For

- Tesla Model Y owners who want better visibility in the front trunk for finding items quickly.

• Drivers who frequently load or unload cargo in low-light conditions and need extra lighting.

• Anyone looking for an easy, no-drill upgrade that adds modern lighting to their vehicle.

• Model Y Juniper owners who want a coordinated lighting solution for both front and rear trunks.

Usage Scenario

Sarah parks her 2025 Model Y in a dimly lit garage after a late grocery run. She opens the front trunk to load the bags and the bright LED strip instantly lights up the space, letting her see exactly where to place each item. When she opens the rear trunk to unload the rest, the magnetic induction light activates automatically, so she never has to fumble for a switch or use her phone's flashlight. The whole process is seamless and frustration-free.

Micro Comparison

Unlike basic trunk lights that require manual activation or complicated hardwiring, this system uses plug-and-play connectors and magnetic induction for automatic operation. The front light connects directly to the vehicle's factory connector, and the rear light draws power from the cigarette lighter socket, so there is no need for professional installation or battery modifications.

Specifications

- Voltage: 12 V

• Item Type: Atmosphere lamp

• Compatibility: 2025 Tesla Model Y (Juniper)

• Note: Models of the 25th version produced after October 25 cannot use our front trunk LED strip product, because the MODEL Y from this date onward has had the front trunk light function canceled.

Package Includes

- 1 x Front trunk LED strip

• 1 x Rear trunk light with magnetic induction

• Wiring harness / connectors

• Installation instructions

Why You Will Love It

You will never have to search for items in a dark trunk again. This LED lighting system adds a modern, practical upgrade to your Tesla that makes everyday use more convenient. The automatic magnetic induction feature means you get light exactly when you need it, without any extra steps.

Questions and Answers

Question: Is this product compatible with the 2024 Tesla Model Y?

Answer: This product is specifically designed for the 2025 Tesla Model Y (Juniper). It may not fit earlier models.

Question: Does the rear trunk light require any wiring modifications?

Answer: No, the rear trunk light connects to the cigarette lighter socket and uses magnetic induction. No cutting or splicing is needed.

Question: Can I install both lights myself?

Answer: Yes, the installation is extremely easy. The front trunk light uses a plug-and-play connector and the rear light plugs into the cigarette lighter socket.

Question: What color is the front trunk LED strip?

Answer: The front trunk LED strip emits yellow and white light.

Question: Will this work if my Model Y was built after October 25?

Answer: No, if your Model Y was produced after October 25, the front trunk light function has been canceled and this product will not work for the front trunk.