5M Brake Line Steel Brake Pipe Kit with M10 Fittings and Connectors | Brake Tube Set

This 5-meter steel brake line kit gives you everything needed to replace or extend your vehicle's brake piping. It comes with 10 M10 tube nuts and 5 connectors so you can create custom brake lines without searching for extra parts.

The brake pipe is made from copper-plated steel with a plastic coating for corrosion resistance. At 4.75 mm outer diameter with 0.7 mm wall thickness, it meets DIN 74 234 standards for reliable braking performance. The set is unflared so you can bend and flare it to fit your specific application.

Each M10 x 1 thread fitting and connector matches standard brake line connections found on many cars, motorcycles, and light trucks. The 16 mm length fittings provide secure connections when properly flared and tightened.

This kit saves you time by bundling the pipe, fittings, and connectors together. You avoid multiple trips to the auto parts store and get consistent quality across all components. Just cut, flare, bend, and install.

Key Features and Benefits

- 5-meter continuous steel brake line that allows custom routing without splicing

• Copper-plated with plastic coating that resists rust and extends service life

• 4.75 mm outer diameter with 0.7 mm wall thickness that matches standard brake system requirements

• 10 M10 x 1 tube nuts included so you have spares for multiple connections

• 5 brake line connectors included for joining sections or making repairs

• Unflared pipe that lets you create the exact flare type needed for your vehicle

• Meets DIN 74 234 specifications for reliable braking system compatibility

Who Is This For

- DIY mechanics replacing rusted or damaged brake lines on cars, trucks, or motorcycles

• Restoration enthusiasts building custom brake systems from scratch

• Workshops needing bulk brake line material with matching fittings for service jobs

• Anyone extending existing brake lines after suspension or chassis modifications

Usage Scenario

Mark noticed his truck's brake line was corroded near the rear axle. He ordered this 5-meter kit, cut the old line, and used the included M10 fittings and connectors to run a new copper-plated steel line along the frame. After flaring both ends and tightening the connections, his brake pedal felt firm again. The plastic coating gave him confidence the new line would last years without rusting through.

Micro Comparison

Unlike buying pre-bent brake lines that may not fit your specific vehicle, this unflared pipe lets you create custom lengths and shapes. The included 10 fittings and 5 connectors mean you do not need to purchase hardware separately. Copper-plated steel offers better corrosion protection than plain steel lines while remaining more affordable than stainless steel.

Specifications

Material: steel, copper-plated + plastic-coated

Outer diameter: 4.75 mm

Wall thickness: 0.7 mm

Thread: M10 x 1

Fitting length: 16 mm

Flare type: F (unflared, ready for flaring)

Standard: DIN 74 234

Package Includes

5 meter brake line steel copper-plated + plastic-coated 4.75 mm

10 brake line fittings M10 x 1

5 brake line connectors M10 x 1

Why You Will Love It

You get a complete brake line system in one box without hunting for matching fittings. The corrosion-resistant coating helps your repair last longer. Having extra fittings means you can finish the job even if you drop one under the workbench.

Questions and Answers

Question: Can this brake line be used for fuel lines too?

Answer: This product is specifically designed for brake systems. Use fuel-rated tubing for fuel lines.

Question: What tools do I need to install this brake line?

Answer: You need a tubing cutter, a flaring tool for 4.75 mm pipe, and a brake line bender. Wrenches are needed for the M10 fittings.

Question: Is this brake line compatible with DOT 3 or DOT 4 brake fluid?

Answer: Yes, the copper-plated steel construction works with standard DOT 3 and DOT 4 brake fluids.

Question: How do I cut this brake line to the right length?

Answer: Use a dedicated tubing cutter for clean cuts. Avoid using a hacksaw as it leaves burrs that can cause leaks.

Question: Can I reuse the old fittings from my car with this pipe?

Answer: It is recommended to use the new M10 fittings included in the kit for best sealing. Old fittings may be corroded or damaged.

Question: What flare type should I create on this pipe?

Answer: This pipe is designed for single or double flares depending on your vehicle. Check your vehicle's service manual for the correct flare type.

Question: Does this kit include a flaring tool?

Answer: No, the kit includes the pipe, fittings, and connectors only. You need a separate flaring tool.